ppc4xx: Update Sequoia/Rainier bootstrap command

As suggested by David Mitchell, here an update for the Sequoia/Rainier
bootstrap command.

Signed-off-by: Stefan Roese <sr@denx.de>

1 files changed, 157 insertions, 48 deletions

diff --git a/board/amcc/sequoia/cmd_sequoia.c b/board/amcc/sequoia/cmd_sequoia.c
index 6fc60ea..f3803c0 100644
--- a/board/amcc/sequoia/cmd_sequoia.c
+++ b/board/amcc/sequoia/cmd_sequoia.c
@@ -26,76 +26,185 @@
 #include <command.h>
 #include <i2c.h>
 
-static u8 boot_533_nor[] = {
-	0x87, 0x78, 0x82, 0x52, 0x09, 0x57, 0xa0, 0x30,
-	0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
-};
+/*
+ * There are 2 versions of production Sequoia & Rainier platforms.
+ * The primary difference is the reference clock. Those with
+ * 33333333 reference clocks will also have 667MHz rated
+ * processors. Not enough differences to have unique clock
+ * settings.
+ *
+ * NOR and NAND boot options change bytes 6, 7, 8, 9, 11. The
+ * values are independent of the rest of the clock settings.
+ *
+ * All Sequoias & Rainiers select from two possible EEPROMs in Boot
+ * Config F. One for 33MHz PCI, one for 66MHz PCI. The following
+ * values are for the 33MHz PCI configuration. Byte 5 (0 base) is
+ * the only  value affected for a 66MHz PCI and simply needs a +0x10.
+ */
+
+#define NAND_COMPATIBLE	0x01
+#define NOR_COMPATIBLE  0x02
+
+/* check with Stefan on CFG_I2C_EEPROM_ADDR */
+#define I2C_EEPROM_ADDR 0x52
 
-static u8 boot_533_nand[] = {
-	0x87, 0x78, 0x82, 0x52, 0x09, 0x57, 0xd0, 0x10,
-	0xa0, 0x68, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
+static char *config_labels[] = {
+	"CPU: 333 PLB: 133 OPB: 66 EBC: 66",
+	"CPU: 333 PLB: 166 OPB: 83 EBC: 55",
+	"CPU: 400 PLB: 133 OPB: 66 EBC: 66",
+	"CPU: 400 PLB: 160 OPB: 80 EBC: 53",
+	"CPU: 416 PLB: 166 OPB: 83 EBC: 55",
+	"CPU: 500 PLB: 166 OPB: 83 EBC: 55",
+	"CPU: 533 PLB: 133 OPB: 66 EBC: 66",
+	"CPU: 667 PLB: 166 OPB: 83 EBC: 55",
+	NULL
 };
 
-static u8 boot_667_nor[] = {
-	0x87, 0x78, 0xa2, 0x52, 0x09, 0xd7, 0xa0, 0x30,
-	0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+static u8 boot_configs[][17] = {
+	{
+		(NOR_COMPATIBLE),
+		0x84, 0x70, 0xa2, 0xa6, 0x05, 0x57, 0xa0, 0x10, 0x40,
+		0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+	},
+	{
+		(NAND_COMPATIBLE | NOR_COMPATIBLE),
+		0xc7, 0x78, 0xf3, 0x4e, 0x05, 0xd7, 0xa0, 0x30, 0x40,
+		0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+	},
+	{
+		(NOR_COMPATIBLE),
+		0x86, 0x78, 0xc2, 0xc6, 0x05, 0x57, 0xa0, 0x30, 0x40,
+		0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+	},
+	{
+		(NOR_COMPATIBLE),
+		0x86, 0x78, 0xc2, 0xa6, 0x05, 0xd7, 0xa0, 0x10, 0x40,
+		0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+	},
+	{
+		(NAND_COMPATIBLE | NOR_COMPATIBLE),
+		0xc6, 0x78, 0x52, 0xa6, 0x05, 0xd7, 0xa0, 0x10, 0x40,
+		0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+	},
+	{
+		(NAND_COMPATIBLE | NOR_COMPATIBLE),
+		0xc7, 0x78, 0x52, 0xc6, 0x05, 0xd7, 0xa0, 0x30, 0x40,
+		0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+	},
+	{
+		(NOR_COMPATIBLE),
+		0x87, 0x78, 0x82, 0x52, 0x09, 0x57, 0xa0, 0x30, 0x40,
+		0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+	},
+	{
+		(NAND_COMPATIBLE | NOR_COMPATIBLE),
+		0x87, 0x78, 0xa2, 0x52, 0x09, 0xd7, 0xa0, 0x30, 0x40,
+		0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+	},
+	{
+		0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+	}
 };
 
-static u8 boot_667_nand[] = {
-	0x87, 0x78, 0xa2, 0x52, 0x09, 0xd7, 0xd0, 0x10,
-	0xa0, 0x68, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
+/*
+ * Bytes 6,8,9,11 change for NAND boot
+ */
+static u8 nand_boot[] = {
+	0xd0,  0xa0, 0x68, 0x58
 };
 
 static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-	u8 chip;
-	u8 *buf;
-	int cpu_freq;
+	u8 *buf, bNAND;
+	int x, y, nbytes, selcfg;
+	extern char console_buffer[];
 
-	if (argc < 3) {
+	if (argc < 2) {
 		printf("Usage:\n%s\n", cmdtp->usage);
 		return 1;
 	}
 
-	cpu_freq = simple_strtol(argv[1], NULL, 10);
-	if (!((cpu_freq == 533) || (cpu_freq == 667))) {
-		printf("Unsupported cpu-frequency - only 533 and 667 supported\n");
+	if ((strcmp(argv[1], "nor") != 0) &&
+	    (strcmp(argv[1], "nand") != 0)) {
+		printf("Unsupported boot-device - only nor|nand support\n");
 		return 1;
 	}
 
-	/* use 0x52 as I2C EEPROM address for now */
-	chip = 0x52;
+	/* set the nand flag based on provided input */
+	if ((strcmp(argv[1], "nand") == 0))
+		bNAND = 1;
+	else
+		bNAND = 0;
 
-	if ((strcmp(argv[2], "nor") != 0) &&
-	    (strcmp(argv[2], "nand") != 0)) {
-		printf("Unsupported boot-device - only nor|nand support\n");
-		return 1;
-	}
+	printf("Available configurations: \n\n");
 
-	if (strcmp(argv[2], "nand") == 0) {
-		switch (cpu_freq) {
-		default:
-		case 533:
-			buf = boot_533_nand;
-			break;
-		case 667:
-			buf = boot_667_nand;
-			break;
+	if (bNAND) {
+		for(x = 0, y = 0; boot_configs[x][0] != 0; x++) {
+			/* filter on nand compatible */
+			if (boot_configs[x][0] & NAND_COMPATIBLE) {
+				printf(" %d - %s\n", (y+1), config_labels[x]);
+				y++;
+			}
 		}
 	} else {
-		switch (cpu_freq) {
-		default:
-		case 533:
-			buf = boot_533_nor;
-			break;
-		case 667:
-			buf = boot_667_nor;
-			break;
+		for(x = 0, y = 0; boot_configs[x][0] != 0; x++) {
+			/* filter on nor compatible */
+			if (boot_configs[x][0] & NOR_COMPATIBLE) {
+				printf(" %d - %s\n", (y+1), config_labels[x]);
+				y++;
+			}
 		}
 	}
 
-	if (i2c_write(chip, 0, 1, buf, 16) != 0)
-		printf("Error writing to EEPROM at address 0x%x\n", chip);
+	do {
+		nbytes = readline(" Selection [1-x / quit]: ");
+
+		if (nbytes) {
+			if (strcmp(console_buffer, "quit") == 0)
+				return 0;
+			selcfg = simple_strtol(console_buffer, NULL, 10);
+			if ((selcfg < 1) || (selcfg > y))
+				nbytes = 0;
+		}
+	} while (nbytes == 0);
+
+
+	y = (selcfg - 1);
+
+	for (x = 0; boot_configs[x][0] != 0; x++) {
+		if (bNAND) {
+			if (boot_configs[x][0] & NAND_COMPATIBLE) {
+				if (y > 0)
+					y--;
+				else if (y < 1)
+					break;
+			}
+		} else {
+			if (boot_configs[x][0] & NOR_COMPATIBLE) {
+				if (y > 0)
+					y--;
+				else if (y < 1)
+					break;
+			}
+		}
+	}
+
+	buf = &boot_configs[x][1];
+
+	if (bNAND) {
+		buf[6] = nand_boot[0];
+		buf[8] = nand_boot[1];
+		buf[9] = nand_boot[2];
+		buf[11] = nand_boot[3];
+	}
+
+	/* check CPLD register +5 for PCI 66MHz flag */
+	if (in8(CFG_BCSR_BASE + 5) & 0x01)
+		buf[5] += 0x10;
+
+	if (i2c_write(I2C_EEPROM_ADDR, 0, 1, buf, 16) != 0)
+		printf("Error writing to EEPROM at address 0x%x\n", I2C_EEPROM_ADDR);
 	udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
 
 	printf("Done\n");
@@ -105,7 +214,7 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 }
 
 U_BOOT_CMD(
-	bootstrap,	3,	0,	do_bootstrap,
+	bootstrap,	2,	0,	do_bootstrap,
 	"bootstrap - program the I2C bootstrap EEPROM\n",
-	"<cpu-freq> <nor|nand> - program the I2C bootstrap EEPROM\n"
+	"<nand|nor> - strap to boot from NAND or NOR flash\n"
 	);