powerpc, 5xxx, 512x: remove support for mpc5xxx and mpc512x

There was for long time no activity in the mpx5xxx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in mpc5xxx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>

5 files changed, 0 insertions, 299 deletions

diff --git a/board/freescale/mpc5121ads/Kconfig b/board/freescale/mpc5121ads/Kconfig
deleted file mode 100644
index f125f9e..0000000
--- a/board/freescale/mpc5121ads/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_MPC5121ADS
-
-config SYS_BOARD
-	default "mpc5121ads"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "mpc5121ads"
-
-endif
diff --git a/board/freescale/mpc5121ads/MAINTAINERS b/board/freescale/mpc5121ads/MAINTAINERS
deleted file mode 100644
index d4aab8f..0000000
--- a/board/freescale/mpc5121ads/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-MPC5121ADS BOARD
-#M:	-
-S:	Maintained
-F:	board/freescale/mpc5121ads/
-F:	include/configs/mpc5121ads.h
-F:	configs/mpc5121ads_defconfig
-F:	configs/mpc5121ads_rev2_defconfig
diff --git a/board/freescale/mpc5121ads/Makefile b/board/freescale/mpc5121ads/Makefile
deleted file mode 100644
index 67cf555..0000000
--- a/board/freescale/mpc5121ads/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2007
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= mpc5121ads.o
diff --git a/board/freescale/mpc5121ads/README b/board/freescale/mpc5121ads/README
deleted file mode 100644
index 741bc40..0000000
--- a/board/freescale/mpc5121ads/README
+++ /dev/null
@@ -1,7 +0,0 @@
-To configure for the current (Rev 3.x) ADS5121
-	make mpc5121ads_config
-This will automatically include PCI, the Real Time CLock, add backup flash
-ability and set the correct frequency and memory configuration.
-
-To configure for the older Rev 2 ADS5121 type (this will not have PCI)
-	make mpc5121ads_rev2_config
diff --git a/board/freescale/mpc5121ads/mpc5121ads.c b/board/freescale/mpc5121ads/mpc5121ads.c
deleted file mode 100644
index d729056..0000000
--- a/board/freescale/mpc5121ads/mpc5121ads.c
+++ /dev/null
@@ -1,265 +0,0 @@
-/*
- * (C) Copyright 2007-2009 DENX Software Engineering
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/bitops.h>
-#include <command.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/mpc512x.h>
-#include <fdt_support.h>
-#ifdef CONFIG_MISC_INIT_R
-#include <i2c.h>
-#endif
-#include <net.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void __mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip);
-
-/* Active chip number set in board_nand_select_device() (mpc5121_nfc.c) */
-extern int mpc5121_nfc_chip;
-
-/* Control chips select signal on MPC5121ADS board */
-void mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip)
-{
-	unsigned char *csreg = (u8 *)CONFIG_SYS_CPLD_BASE + 0x09;
-	u8 v;
-
-	v = in_8(csreg);
-	v |= 0x0F;
-
-	if (chip >= 0) {
-		__mpc5121_nfc_select_chip(mtd, 0);
-		v &= ~(1 << mpc5121_nfc_chip);
-	} else {
-		__mpc5121_nfc_select_chip(mtd, -1);
-	}
-
-	out_8(csreg, v);
-}
-
-int board_early_init_f(void)
-{
-	/*
-	 * Disable Boot NOR FLASH write protect - CPLD Reg 8 NOR FLASH Control
-	 *
-	 * Without this the flash identification routine fails, as it needs to issue
-	 * write commands in order to establish the device ID.
-	 */
-
-#ifdef CONFIG_MPC5121ADS_REV2
-	out_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08), 0xC1);
-#else
-	if (in_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) & 0x04) {
-		out_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08), 0xC1);
-	} else {
-		/* running from Backup flash */
-		out_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08), 0x32);
-	}
-#endif
-	return 0;
-}
-
-int is_micron(void){
-
-	ushort brd_rev = *(vu_short *)(CONFIG_SYS_CPLD_BASE + 0x00);
-	uchar macaddr[6];
-	u32 brddate, macchk, ismicron;
-
-	/*
-	 * MAC address has serial number with date of manufacture
-	 * Boards made before Nov-08 #1180 use Micron memory;
-	 * 001e59 is the STx vendor #
-	 * Default is Elpida since it works for both but is slightly slower
-	 */
-	ismicron = 0;
-	if (brd_rev >= 0x0400 && eth_getenv_enetaddr("ethaddr", macaddr)) {
-		brddate = (macaddr[3] << 16) + (macaddr[4] << 8) + macaddr[5];
-		macchk = (macaddr[0] << 16) + (macaddr[1] << 8) + macaddr[2];
-		debug("brddate = %d\n\t", brddate);
-
-		if (macchk == 0x001e59 && brddate <= 8111180)
-			ismicron = 1;
-	} else if (brd_rev < 0x400) {
-		ismicron = 1;
-	}
-	debug("Using %s Memory settings\n\t",
-		ismicron ? "Micron" : "Elpida");
-	return(ismicron);
-}
-
-int dram_init(void)
-{
-	u32 msize = 0;
-	/*
-	 * Elpida MDDRC and initialization settings are an alternative
-	 * to the Default Micron ones for all but the earliest Rev 4 boards
-	 */
-	ddr512x_config_t elpida_mddrc_config = {
-		.ddr_sys_config   = CONFIG_SYS_MDDRC_SYS_CFG_ELPIDA,
-		.ddr_time_config0 = CONFIG_SYS_MDDRC_TIME_CFG0,
-		.ddr_time_config1 = CONFIG_SYS_MDDRC_TIME_CFG1_ELPIDA,
-		.ddr_time_config2 = CONFIG_SYS_MDDRC_TIME_CFG2_ELPIDA,
-	};
-
-	u32 elpida_init_sequence[] = {
-		CONFIG_SYS_DDRCMD_NOP,
-		CONFIG_SYS_DDRCMD_NOP,
-		CONFIG_SYS_DDRCMD_NOP,
-		CONFIG_SYS_DDRCMD_NOP,
-		CONFIG_SYS_DDRCMD_NOP,
-		CONFIG_SYS_DDRCMD_NOP,
-		CONFIG_SYS_DDRCMD_NOP,
-		CONFIG_SYS_DDRCMD_NOP,
-		CONFIG_SYS_DDRCMD_NOP,
-		CONFIG_SYS_DDRCMD_NOP,
-		CONFIG_SYS_DDRCMD_PCHG_ALL,
-		CONFIG_SYS_DDRCMD_NOP,
-		CONFIG_SYS_DDRCMD_RFSH,
-		CONFIG_SYS_DDRCMD_NOP,
-		CONFIG_SYS_DDRCMD_RFSH,
-		CONFIG_SYS_DDRCMD_NOP,
-		CONFIG_SYS_DDRCMD_EM2,
-		CONFIG_SYS_DDRCMD_EM3,
-		CONFIG_SYS_DDRCMD_EN_DLL,
-		CONFIG_SYS_ELPIDA_RES_DLL,
-		CONFIG_SYS_DDRCMD_PCHG_ALL,
-		CONFIG_SYS_DDRCMD_RFSH,
-		CONFIG_SYS_DDRCMD_RFSH,
-		CONFIG_SYS_DDRCMD_RFSH,
-		CONFIG_SYS_ELPIDA_INIT_DEV_OP,
-		CONFIG_SYS_DDRCMD_NOP,
-		CONFIG_SYS_DDRCMD_NOP,
-		CONFIG_SYS_DDRCMD_NOP,
-		CONFIG_SYS_DDRCMD_NOP,
-		CONFIG_SYS_DDRCMD_NOP,
-		CONFIG_SYS_DDRCMD_NOP,
-		CONFIG_SYS_DDRCMD_NOP,
-		CONFIG_SYS_DDRCMD_NOP,
-		CONFIG_SYS_DDRCMD_NOP,
-		CONFIG_SYS_DDRCMD_NOP,
-		CONFIG_SYS_DDRCMD_OCD_DEFAULT,
-		CONFIG_SYS_ELPIDA_OCD_EXIT,
-		CONFIG_SYS_DDRCMD_NOP,
-		CONFIG_SYS_DDRCMD_NOP,
-		CONFIG_SYS_DDRCMD_NOP,
-		CONFIG_SYS_DDRCMD_NOP,
-		CONFIG_SYS_DDRCMD_NOP,
-		CONFIG_SYS_DDRCMD_NOP,
-		CONFIG_SYS_DDRCMD_NOP,
-		CONFIG_SYS_DDRCMD_NOP,
-		CONFIG_SYS_DDRCMD_NOP,
-		CONFIG_SYS_DDRCMD_NOP
-	};
-
-	if (is_micron()) {
-		msize = fixed_sdram(NULL, NULL, 0);
-	} else {
-		msize = fixed_sdram(&elpida_mddrc_config,
-				elpida_init_sequence,
-				sizeof(elpida_init_sequence)/sizeof(u32));
-	}
-
-	gd->ram_size = msize;
-
-	return 0;
-}
-
-int misc_init_r(void)
-{
-	return 0;
-}
-
-static  iopin_t ioregs_init[] = {
-	/* FUNC1=FEC_RX_DV Sets Next 3 to FEC pads */
-	{
-		offsetof(struct ioctrl512x, io_control_spdif_txclk), 3, 0,
-		IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
-	},
-	/* Set highest Slew on 9 PATA pins */
-	{
-		offsetof(struct ioctrl512x, io_control_pata_ce1), 9, 1,
-		IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
-	},
-	/* FUNC1=FEC_COL Sets Next 15 to FEC pads */
-	{
-		offsetof(struct ioctrl512x, io_control_psc0_0), 15, 0,
-		IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
-	},
-	/* FUNC1=SPDIF_TXCLK */
-	{
-		offsetof(struct ioctrl512x, io_control_lpc_cs1), 1, 0,
-		IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
-	},
-	/* FUNC2=SPDIF_TX and sets Next pin to SPDIF_RX */
-	{
-		offsetof(struct ioctrl512x, io_control_i2c1_scl), 2, 0,
-		IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
-	},
-	/* FUNC2=DIU CLK */
-	{
-		offsetof(struct ioctrl512x, io_control_psc6_0), 1, 0,
-		IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
-	},
-	/* FUNC2=DIU_HSYNC */
-	{
-		offsetof(struct ioctrl512x, io_control_psc6_1), 1, 0,
-		IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
-	},
-	/* FUNC2=DIUVSYNC Sets Next 26 to DIU Pads */
-	{
-		offsetof(struct ioctrl512x, io_control_psc6_4), 26, 0,
-		IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
-	}
-};
-
-static  iopin_t rev2_silicon_pci_ioregs_init[] = {
-	/* FUNC0=PCI Sets next 54 to PCI pads */
-	{
-		offsetof(struct ioctrl512x, io_control_pci_ad31), 54, 0,
-		IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_DS(0)
-	}
-};
-
-int checkboard (void)
-{
-	ushort brd_rev = *(vu_short *) (CONFIG_SYS_CPLD_BASE + 0x00);
-	uchar cpld_rev = *(vu_char *) (CONFIG_SYS_CPLD_BASE + 0x02);
-	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
-	u32 spridr = in_be32(&im->sysconf.spridr);
-
-	printf ("Board: MPC5121ADS rev. 0x%04x (CPLD rev. 0x%02x)\n",
-		brd_rev, cpld_rev);
-
-	/* initialize function mux & slew rate IO inter alia on IO Pins  */
-	iopin_initialize(ioregs_init, ARRAY_SIZE(ioregs_init));
-
-	if (SVR_MJREV (spridr) >= 2)
-		iopin_initialize(rev2_silicon_pci_ioregs_init, 1);
-
-	return 0;
-}
-
-#ifdef CONFIG_OF_BOARD_SETUP
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	ft_cpu_setup(blob, bd);
-
-	return 0;
-}
-#endif /* CONFIG_OF_BOARD_SETUP */