Merge branch 'master' of git://www.denx.de/git/u-boot-imx

Migrate CONFIG_ARCH_USE_MEMSET/MEMCPY with this merge.

Signed-off-by: Tom Rini <trini@konsulko.com>

7 files changed, 433 insertions, 2 deletions

diff --git a/board/freescale/mx6sllevk/Kconfig b/board/freescale/mx6sllevk/Kconfig
new file mode 100644
index 0000000..4ba9bbf
--- /dev/null
+++ b/board/freescale/mx6sllevk/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_MX6SLLEVK
+
+config SYS_BOARD
+	default "mx6sllevk"
+
+config SYS_VENDOR
+	default "freescale"
+
+config SYS_CONFIG_NAME
+	default "mx6sllevk"
+
+endif
diff --git a/board/freescale/mx6sllevk/Makefile b/board/freescale/mx6sllevk/Makefile
new file mode 100644
index 0000000..667fcb0
--- /dev/null
+++ b/board/freescale/mx6sllevk/Makefile
@@ -0,0 +1,6 @@
+# (C) Copyright 2016 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y  := mx6sllevk.o
diff --git a/board/freescale/mx6sllevk/imximage.cfg b/board/freescale/mx6sllevk/imximage.cfg
new file mode 100644
index 0000000..7d8b323
--- /dev/null
+++ b/board/freescale/mx6sllevk/imximage.cfg
@@ -0,0 +1,127 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+#define __ASSEMBLY__
+#include <config.h>
+
+/* image version */
+
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+
+BOOT_FROM	sd
+
+#ifdef CONFIG_USE_IMXIMG_PLUGIN
+/*PLUGIN    plugin-binary-file    IRAM_FREE_START_ADDR*/
+PLUGIN	board/freescale/mx6sllevk/plugin.bin 0x00907000
+#else
+
+#ifdef CONFIG_SECURE_BOOT
+CSF CONFIG_CSF_SIZE
+#endif
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type           Address        Value
+ *
+ * where:
+ *	Addr-type register length (1,2 or 4 bytes)
+ *	Address	  absolute address of the register
+ *	value	  value to be stored in the register
+ */
+
+/* Enable all clocks */
+DATA 4 0x020c4068 0xffffffff
+DATA 4 0x020c406c 0xffffffff
+DATA 4 0x020c4070 0xffffffff
+DATA 4 0x020c4074 0xffffffff
+DATA 4 0x020c4078 0xffffffff
+DATA 4 0x020c407c 0xffffffff
+DATA 4 0x020c4080 0xffffffff
+
+DATA 4 0x020E0550 0x00080000
+DATA 4 0x020E0534 0x00000000
+DATA 4 0x020E02AC 0x00000030
+DATA 4 0x020E0548 0x00000030
+DATA 4 0x020E052C 0x00000030
+DATA 4 0x020E0530 0x00020000
+DATA 4 0x020E02B0 0x00003030
+DATA 4 0x020E02B4 0x00003030
+DATA 4 0x020E02B8 0x00003030
+DATA 4 0x020E02BC 0x00003030
+DATA 4 0x020E0540 0x00020000
+DATA 4 0x020E0544 0x00000030
+DATA 4 0x020E054C 0x00000030
+DATA 4 0x020E0554 0x00000030
+DATA 4 0x020E0558 0x00000030
+DATA 4 0x020E0294 0x00000030
+DATA 4 0x020E0298 0x00000030
+DATA 4 0x020E029C 0x00000030
+DATA 4 0x020E02A0 0x00000030
+DATA 4 0x020E02C0 0x00082030
+
+DATA 4 0x021B001C 0x00008000
+
+DATA 4 0x021B0800 0xA1390003
+DATA 4 0x021B085c 0x084700C7
+DATA 4 0x021B0890 0x00400000
+DATA 4 0x021B0848 0x3F393B3C
+DATA 4 0x021B0850 0x262C3826
+DATA 4 0x021B081C 0x33333333
+DATA 4 0x021B0820 0x33333333
+DATA 4 0x021B0824 0x33333333
+DATA 4 0x021B0828 0x33333333
+
+DATA 4 0x021B082C 0xf3333333
+DATA 4 0x021B0830 0xf3333333
+DATA 4 0x021B0834 0xf3333333
+DATA 4 0x021B0838 0xf3333333
+DATA 4 0x021B08C0 0x24922492
+DATA 4 0x021B08b8 0x00000800
+
+DATA 4 0x021B0004 0x00020052
+DATA 4 0x021B000C 0x53574333
+DATA 4 0x021B0010 0x00100B22
+DATA 4 0x021B0038 0x00170778
+DATA 4 0x021B0014 0x00C700DB
+DATA 4 0x021B0018 0x00201718
+DATA 4 0x021B002C 0x0F9F26D2
+DATA 4 0x021B0030 0x009F0E10
+DATA 4 0x021B0040 0x0000005F
+DATA 4 0x021B0000 0xC4190000
+
+DATA 4 0x021B083C 0x20000000
+
+DATA 4 0x021B001C 0x00008050
+DATA 4 0x021B001C 0x00008058
+DATA 4 0x021B001C 0x003F8030
+DATA 4 0x021B001C 0x003F8038
+DATA 4 0x021B001C 0xFF0A8030
+DATA 4 0x021B001C 0xFF0A8038
+DATA 4 0x021B001C 0x04028030
+DATA 4 0x021B001C 0x04028038
+DATA 4 0x021B001C 0x83018030
+DATA 4 0x021B001C 0x83018038
+DATA 4 0x021B001C 0x01038030
+DATA 4 0x021B001C 0x01038038
+
+DATA 4 0x021B0020 0x00001800
+DATA 4 0x021B0800 0xA1390003
+DATA 4 0x021B0004 0x00020052
+DATA 4 0x021B0404 0x00011006
+DATA 4 0x021B001C 0x00000000
+#endif
diff --git a/board/freescale/mx6sllevk/mx6sllevk.c b/board/freescale/mx6sllevk/mx6sllevk.c
new file mode 100644
index 0000000..74a27a3
--- /dev/null
+++ b/board/freescale/mx6sllevk/mx6sllevk.c
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/boot_mode.h>
+#include <asm/io.h>
+#include <common.h>
+#include <linux/sizes.h>
+#include <mmc.h>
+#include <power/pmic.h>
+#include <power/pfuze100_pmic.h>
+#include "../common/pfuze.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |		\
+	PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |		\
+	PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+int dram_init(void)
+{
+	gd->ram_size = imx_ddr_size();
+
+	return 0;
+}
+
+static iomux_v3_cfg_t const uart1_pads[] = {
+	MX6_PAD_UART1_TXD__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+	MX6_PAD_UART1_RXD__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const wdog_pads[] = {
+	MX6_PAD_WDOG_B__WDOG1_B | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+static void setup_iomux_uart(void)
+{
+	imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
+}
+
+#ifdef CONFIG_DM_PMIC_PFUZE100
+int power_init_board(void)
+{
+	struct udevice *dev;
+	int ret;
+	u32 dev_id, rev_id, i;
+	u32 switch_num = 6;
+	u32 offset = PFUZE100_SW1CMODE;
+
+	ret = pmic_get("pfuze100", &dev);
+	if (ret == -ENODEV)
+		return 0;
+
+	if (ret != 0)
+		return ret;
+
+	dev_id = pmic_reg_read(dev, PFUZE100_DEVICEID);
+	rev_id = pmic_reg_read(dev, PFUZE100_REVID);
+	printf("PMIC: PFUZE100! DEV_ID=0x%x REV_ID=0x%x\n", dev_id, rev_id);
+
+
+	/* Init mode to APS_PFM */
+	pmic_reg_write(dev, PFUZE100_SW1ABMODE, APS_PFM);
+
+	for (i = 0; i < switch_num - 1; i++)
+		pmic_reg_write(dev, offset + i * SWITCH_SIZE, APS_PFM);
+
+	/* set SW1AB staby volatage 0.975V */
+	pmic_clrsetbits(dev, PFUZE100_SW1ABSTBY, 0x3f, 0x1b);
+
+	/* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
+	pmic_clrsetbits(dev, PFUZE100_SW1ABCONF, 0xc0, 0x40);
+
+	/* set SW1C staby volatage 0.975V */
+	pmic_clrsetbits(dev, PFUZE100_SW1CSTBY, 0x3f, 0x1b);
+
+	/* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */
+	pmic_clrsetbits(dev, PFUZE100_SW1CCONF, 0xc0, 0x40);
+
+	return 0;
+}
+#endif
+
+int board_early_init_f(void)
+{
+	setup_iomux_uart();
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* Address of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+	return 0;
+}
+
+int board_late_init(void)
+{
+	imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	puts("Board: MX6SLL EVK\n");
+
+	return 0;
+}
+
+int board_mmc_get_env_dev(int devno)
+{
+	return devno;
+}
+
+int mmc_map_to_kernel_blk(int devno)
+{
+	return devno;
+}
diff --git a/board/freescale/mx6sllevk/plugin.S b/board/freescale/mx6sllevk/plugin.S
new file mode 100644
index 0000000..f9ef35a
--- /dev/null
+++ b/board/freescale/mx6sllevk/plugin.S
@@ -0,0 +1,155 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <config.h>
+
+/* DDR script */
+.macro imx6sll_evk_ddr_setting
+	ldr r0, =IOMUXC_BASE_ADDR
+	ldr r1, =0x00080000
+	str r1, [r0, #0x550]
+	ldr r1, =0x00000000
+	str r1, [r0, #0x534]
+	ldr r1, =0x00000030
+	str r1, [r0, #0x2AC]
+	str r1, [r0, #0x548]
+	str r1, [r0, #0x52C]
+	ldr r1, =0x00020000
+	str r1, [r0, #0x530]
+	ldr r1, =0x00003030
+	str r1, [r0, #0x2B0]
+	str r1, [r0, #0x2B4]
+	str r1, [r0, #0x2B8]
+	str r1, [r0, #0x2BC]
+
+	ldr r1, =0x00020000
+	str r1, [r0, #0x540]
+	ldr r1, =0x00000030
+	str r1, [r0, #0x544]
+	str r1, [r0, #0x54C]
+	str r1, [r0, #0x554]
+	str r1, [r0, #0x558]
+	str r1, [r0, #0x294]
+	str r1, [r0, #0x298]
+	str r1, [r0, #0x29C]
+	str r1, [r0, #0x2A0]
+
+	ldr r1, =0x00082030
+	str r1, [r0, #0x2C0]
+
+	ldr r0, =MMDC_P0_BASE_ADDR
+	ldr r1, =0x00008000
+	str r1, [r0, #0x1C]
+	ldr r1, =0xA1390003
+	str r1, [r0, #0x800]
+	ldr r1, =0x084700C7
+	str r1, [r0, #0x85C]
+	ldr r1, =0x00400000
+	str r1, [r0, #0x890]
+
+	ldr r1, =0x3F393B3C
+	str r1, [r0, #0x848]
+	ldr r1, =0x262C3826
+	str r1, [r0, #0x850]
+
+	ldr r1, =0x33333333
+	str r1, [r0, #0x81C]
+	str r1, [r0, #0x820]
+	str r1, [r0, #0x824]
+	str r1, [r0, #0x828]
+
+	ldr r1, =0xf3333333
+	str r1, [r0, #0x82C]
+	str r1, [r0, #0x830]
+	str r1, [r0, #0x834]
+	str r1, [r0, #0x838]
+
+	ldr r1, =0x24922492
+	str r1, [r0, #0x8C0]
+	ldr r1, =0x00000800
+	str r1, [r0, #0x8B8]
+
+	ldr r1, =0x00020052
+	str r1, [r0, #0x004]
+	ldr r1, =0x53574333
+	str r1, [r0, #0x00C]
+	ldr r1, =0x00100B22
+	str r1, [r0, #0x010]
+	ldr r1, =0x00170778
+	str r1, [r0, #0x038]
+	ldr r1, =0x00C700DB
+	str r1, [r0, #0x014]
+	ldr r1, =0x00201718
+	str r1, [r0, #0x018]
+	ldr r1, =0x0F9F26D2
+	str r1, [r0, #0x02C]
+	ldr r1, =0x009F0E10
+	str r1, [r0, #0x030]
+	ldr r1, =0x0000005F
+	str r1, [r0, #0x040]
+	ldr r1, =0xC4190000
+	str r1, [r0, #0x000]
+	ldr r1, =0x20000000
+	str r1, [r0, #0x83C]
+
+	ldr r1, =0x00008050
+	str r1, [r0, #0x01C]
+	ldr r1, =0x00008058
+	str r1, [r0, #0x01C]
+	ldr r1, =0x003F8030
+	str r1, [r0, #0x01C]
+	ldr r1, =0x003F8038
+	str r1, [r0, #0x01C]
+	ldr r1, =0xFF0A8030
+	str r1, [r0, #0x01C]
+	ldr r1, =0xFF0A8038
+	str r1, [r0, #0x01C]
+	ldr r1, =0x04028030
+	str r1, [r0, #0x01C]
+	ldr r1, =0x04028038
+	str r1, [r0, #0x01C]
+	ldr r1, =0x83018030
+	str r1, [r0, #0x01C]
+	ldr r1, =0x83018038
+	str r1, [r0, #0x01C]
+	ldr r1, =0x01038030
+	str r1, [r0, #0x01C]
+	ldr r1, =0x01038038
+	str r1, [r0, #0x01C]
+
+	ldr r1, =0x00001800
+	str r1, [r0, #0x020]
+	ldr r1, =0xA1390003
+	str r1, [r0, #0x800]
+	ldr r1, =0x00020052
+	str r1, [r0, #0x004]
+	ldr r1, =0x00011006
+	str r1, [r0, #0x404]
+	ldr r1, =0x00000000
+	str r1, [r0, #0x01C]
+.endm
+
+.macro imx6_clock_gating
+	ldr r0, =CCM_BASE_ADDR
+	ldr r1, =0xffffffff
+	str r1, [r0, #0x068]
+	str r1, [r0, #0x06c]
+	str r1, [r0, #0x070]
+	str r1, [r0, #0x074]
+	str r1, [r0, #0x078]
+	str r1, [r0, #0x07c]
+	str r1, [r0, #0x080]
+.endm
+
+.macro imx6_qos_setting
+.endm
+
+.macro imx6_ddr_setting
+	imx6sll_evk_ddr_setting
+.endm
+
+/* include the common plugin code here */
+#include <asm/arch/mx6_plugin.S>
diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
index 965e511..0460cd9 100644
--- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c
+++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
@@ -504,7 +504,7 @@ static iomux_v3_cfg_t const lcd_pads[] = {
 
 static int setup_lcd(void)
 {
-	enable_lcdif_clock(LCDIF1_BASE_ADDR);
+	enable_lcdif_clock(LCDIF1_BASE_ADDR, 1);
 
 	imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
 
diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
index 399bad2..b28ce10 100644
--- a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
+++ b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
@@ -600,7 +600,7 @@ static iomux_v3_cfg_t const lcd_pads[] = {
 
 static int setup_lcd(void)
 {
-	enable_lcdif_clock(LCDIF1_BASE_ADDR);
+	enable_lcdif_clock(LCDIF1_BASE_ADDR, 1);
 
 	imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));