summaryrefslogtreecommitdiff
path: root/board/raspberrypi
diff options
context:
space:
mode:
authorFabian Vogt <fvogt@suse.com>2016-09-26 12:26:50 (GMT)
committerTom Rini <trini@konsulko.com>2016-11-29 01:09:51 (GMT)
commitd8396a3272edc4b8154d0c93ea9b40473b300739 (patch)
tree71e709a639edcfa0ffd04ea2b1ef69bd146bb40e /board/raspberrypi
parentcb97ad47bfa365128927438b94065fa900838770 (diff)
downloadu-boot-fsl-qoriq-d8396a3272edc4b8154d0c93ea9b40473b300739.tar.xz
board: rpi: move uart deactivation to board_init
When using OF_CONTROL, the disabled value of the mini UART platdata gets reset after board_early_init_f. So move detection and disabling to board_init and remove board_early_init_f. This uses the first device using the mini uart driver, as this method works reliably with different device trees or even no device tree at all. Signed-off-by: Fabian Vogt <fvogt@suse.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Diffstat (limited to 'board/raspberrypi')
-rw-r--r--board/raspberrypi/rpi/rpi.c40
1 files changed, 26 insertions, 14 deletions
diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
index ffd6d31..e82022e 100644
--- a/board/raspberrypi/rpi/rpi.c
+++ b/board/raspberrypi/rpi/rpi.c
@@ -472,15 +472,6 @@ static void get_board_rev(void)
printf("RPI %s (0x%x)\n", model->name, revision);
}
-int board_init(void)
-{
- get_board_rev();
-
- gd->bd->bi_boot_params = 0x100;
-
- return power_on_module(BCM2835_MBOX_POWER_DEVID_USB_HCD);
-}
-
#ifndef CONFIG_PL01X_SERIAL
static bool rpi_is_serial_active(void)
{
@@ -500,17 +491,38 @@ static bool rpi_is_serial_active(void)
return true;
}
+
+/* Disable mini-UART I/O if it's not pinmuxed to our pins.
+ * The firmware only enables it if explicitly done in config.txt: enable_uart=1
+ */
+static void rpi_disable_inactive_uart(void)
+{
+ struct udevice *dev;
+ struct bcm283x_mu_serial_platdata *plat;
+
+ if (uclass_get_device_by_driver(UCLASS_SERIAL,
+ DM_GET_DRIVER(serial_bcm283x_mu),
+ &dev) || !dev)
+ return;
+
+ if (!rpi_is_serial_active()) {
+ plat = dev_get_platdata(dev);
+ plat->disabled = true;
+ }
+}
#endif
-int board_early_init_f(void)
+int board_init(void)
{
#ifndef CONFIG_PL01X_SERIAL
- /* Disable mini-UART I/O if it's not pinmuxed to our pins */
- if (!rpi_is_serial_active())
- serial_platdata.disabled = true;
+ rpi_disable_inactive_uart();
#endif
- return 0;
+ get_board_rev();
+
+ gd->bd->bi_boot_params = 0x100;
+
+ return power_on_module(BCM2835_MBOX_POWER_DEVID_USB_HCD);
}
int board_mmc_init(bd_t *bis)