diff options
author | wdenk <wdenk> | 2003-06-16 23:50:08 (GMT) |
---|---|---|
committer | wdenk <wdenk> | 2003-06-16 23:50:08 (GMT) |
commit | 2abbe0754759f94c79125a2534fbc4be74f416bc (patch) | |
tree | 98c52ea3bade5efef565044ede183d6c2b30629b /board | |
parent | 71f9511803de65a3b98d2f592d418da1d1539f13 (diff) | |
download | u-boot-fsl-qoriq-2abbe0754759f94c79125a2534fbc4be74f416bc.tar.xz |
* Patch by Nicolas Lacressonniere, 11 Jun 2003:
Modifications for Atmel AT91RM9200DK ARM920T based development kit
- Add Atmel DataFlash support for reading and writing.
- Add possibility to boot a Linux from DataFlash with BOOTM command.
- Add Flash detection on Atmel AT91RM9200DK
(between Atmel AT49BV1614 and AT49BV1614A flashes)
- Replace old Ethernet PHY layer functions
- Change link address
* Patch by Frank Smith, 9 Jun 2003:
use CRIT_EXCEPTION for machine check on 4xx
* Patch by Detlev Zundel, 13 Jun 2003:
added implementation of the "carinfo" command in cmd_immap.c
Diffstat (limited to 'board')
-rw-r--r-- | board/at91rm9200dk/at91rm9200dk.c | 89 | ||||
-rw-r--r-- | board/at91rm9200dk/config.mk | 2 | ||||
-rw-r--r-- | board/at91rm9200dk/flash.c | 608 | ||||
-rw-r--r-- | board/kup4k/kup4k.c | 10 |
4 files changed, 389 insertions, 320 deletions
diff --git a/board/at91rm9200dk/at91rm9200dk.c b/board/at91rm9200dk/at91rm9200dk.c index 07def18..ffd9687 100644 --- a/board/at91rm9200dk/at91rm9200dk.c +++ b/board/at91rm9200dk/at91rm9200dk.c @@ -30,28 +30,35 @@ * Miscelaneous platform dependent initialisations */ -int board_init(void) - { - DECLARE_GLOBAL_DATA_PTR; +int board_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + /* Enable Ctrlc */ + console_init_f (); + + /* Correct IRDA resistor problem */ + /* Set PA23_TXD in Output */ + (AT91PS_PIO) AT91C_BASE_PIOA->PIO_OER = AT91C_PA23_TXD2; - /* memory and cpu-speed are setup before relocation */ - /* so we do _nothing_ here */ + /* memory and cpu-speed are setup before relocation */ + /* so we do _nothing_ here */ - /* arch number of AT91RM9200DK-Board */ - gd->bd->bi_arch_number = 251; - /* adress of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + /* arch number of AT91RM9200DK-Board */ + gd->bd->bi_arch_number = 251; + /* adress of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - return 0; + return 0; } -int dram_init(void) +int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; + DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM; - gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; - return 0; + gd->bd->bi_dram[0].start = PHYS_SDRAM; + gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; + return 0; } /* @@ -59,47 +66,47 @@ int dram_init(void) * The NAND lives in the CS2* space */ #if (CONFIG_COMMANDS & CFG_CMD_NAND) -extern void -nand_probe(ulong physadr); +extern void nand_probe (ulong physadr); -#define AT91_SMARTMEDIA_BASE 0x40000000 /* physical address to access memory on NCS3 */ -void -nand_init(void) +#define AT91_SMARTMEDIA_BASE 0x40000000 /* physical address to access memory on NCS3 */ +void nand_init (void) { /* Setup Smart Media, fitst enable the address range of CS3 */ - *AT91C_EBI_CSA |= AT91C_EBI_CS3A_SMC_SmartMedia; - /* set the bus interface characteristics based on - tDS Data Set up Time 30 - ns - tDH Data Hold Time 20 - ns - tALS ALE Set up Time 20 - ns - 16ns at 60 MHz ~= 3 */ + *AT91C_EBI_CSA |= AT91C_EBI_CS3A_SMC_SmartMedia; + /* set the bus interface characteristics based on + tDS Data Set up Time 30 - ns + tDH Data Hold Time 20 - ns + tALS ALE Set up Time 20 - ns + 16ns at 60 MHz ~= 3 */ /*memory mapping structures */ #define SM_ID_RWH (5 << 28) #define SM_RWH (1 << 28) #define SM_RWS (0 << 24) #define SM_TDF (1 << 8) #define SM_NWS (3) - AT91C_BASE_SMC2->SMC2_CSR[3] = ( SM_RWH|SM_RWS | AT91C_SMC2_ACSS_STANDARD | - AT91C_SMC2_DBW_8 | SM_TDF | - AT91C_SMC2_WSEN | SM_NWS); + AT91C_BASE_SMC2->SMC2_CSR[3] = (SM_RWH | SM_RWS | + AT91C_SMC2_ACSS_STANDARD | AT91C_SMC2_DBW_8 | + SM_TDF | AT91C_SMC2_WSEN | SM_NWS); - /* enable the SMOE line PC0=SMCE, A21=CLE, A22=ALE */ - *AT91C_PIOC_ASR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE | AT91C_PC3_BFBAA_SMWE; - *AT91C_PIOC_PDR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE | AT91C_PC3_BFBAA_SMWE; + /* enable the SMOE line PC0=SMCE, A21=CLE, A22=ALE */ + *AT91C_PIOC_ASR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE | + AT91C_PC3_BFBAA_SMWE; + *AT91C_PIOC_PDR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE | + AT91C_PC3_BFBAA_SMWE; /* Configure PC2 as input (signal READY of the SmartMedia) */ - *AT91C_PIOC_PER = AT91C_PC2_BFAVD; /* enable direct output enable */ - *AT91C_PIOC_ODR = AT91C_PC2_BFAVD; /* disable output */ + *AT91C_PIOC_PER = AT91C_PC2_BFAVD; /* enable direct output enable */ + *AT91C_PIOC_ODR = AT91C_PC2_BFAVD; /* disable output */ /* Configure PB1 as input (signal Card Detect of the SmartMedia) */ - *AT91C_PIOB_PER = AT91C_PIO_PB1; /* enable direct output enable */ - *AT91C_PIOB_ODR = AT91C_PIO_PB1; /* disable output */ + *AT91C_PIOB_PER = AT91C_PIO_PB1; /* enable direct output enable */ + *AT91C_PIOB_ODR = AT91C_PIO_PB1; /* disable output */ - if (*AT91C_PIOB_PDSR & AT91C_PIO_PB1) - printf ("No "); - printf ("SmartMedia card inserted\n"); + if (*AT91C_PIOB_PDSR & AT91C_PIO_PB1) + printf ("No "); + printf ("SmartMedia card inserted\n"); - printf("Probing at 0x%.8x\n", AT91_SMARTMEDIA_BASE); - nand_probe(AT91_SMARTMEDIA_BASE); + printf ("Probing at 0x%.8x\n", AT91_SMARTMEDIA_BASE); + nand_probe (AT91_SMARTMEDIA_BASE); } #endif diff --git a/board/at91rm9200dk/config.mk b/board/at91rm9200dk/config.mk index a682451..009b4d7 100644 --- a/board/at91rm9200dk/config.mk +++ b/board/at91rm9200dk/config.mk @@ -1,2 +1,2 @@ -TEXT_BASE = 0x21fa0000 +TEXT_BASE = 0x21f00000 diff --git a/board/at91rm9200dk/flash.c b/board/at91rm9200dk/flash.c index 6497f11..4d4524f 100644 --- a/board/at91rm9200dk/flash.c +++ b/board/at91rm9200dk/flash.c @@ -31,11 +31,40 @@ ulong myflush(void); +/* Flash Organization Structure */ +typedef struct OrgDef +{ + unsigned int sector_number; + unsigned int sector_size; +} OrgDef; + + +/* Flash Organizations */ +OrgDef OrgAT49BV16x4[] = +{ + { 8, 8*1024 }, /* 8 * 8kBytes sectors */ + { 2, 32*1024 }, /* 2 * 32kBytes sectors */ + { 30, 64*1024 } /* 30 * 64kBytes sectors */ +}; + +OrgDef OrgAT49BV16x4A[] = +{ + { 8, 8*1024 }, /* 8 * 8kBytes sectors */ + { 31, 64*1024 } /* 31 * 64kBytes sectors */ +}; + + #define FLASH_BANK_SIZE 0x200000 /* 2 MB */ #define MAIN_SECT_SIZE 0x10000 /* 64 KB */ flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; +/* AT49BV1614A Codes */ +#define FLASH_CODE1 0xAA +#define FLASH_CODE2 0x55 +#define ID_IN_CODE 0x90 +#define ID_OUT_CODE 0xF0 + #define CMD_READ_ARRAY 0x00F0 #define CMD_UNLOCK1 0x00AA @@ -48,6 +77,9 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; #define MEM_FLASH_ADDR1 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00005555<<1))) #define MEM_FLASH_ADDR2 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00002AAA<<1))) +#define IDENT_FLASH_ADDR1 (*(volatile u16 *)(CFG_FLASH_BASE + (0x0000555<<1))) +#define IDENT_FLASH_ADDR2 (*(volatile u16 *)(CFG_FLASH_BASE + (0x0000AAA<<1))) + #define BIT_ERASE_DONE 0x0080 #define BIT_RDY_MASK 0x0080 #define BIT_PROGRAM_ERROR 0x0020 @@ -59,339 +91,375 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /*----------------------------------------------------------------------- */ - -ulong flash_init(void) +void flash_identification (flash_info_t * info) { - int i, j; - ulong size = 0; - - for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) - { - ulong flashbase = 0; - flash_info[i].flash_id = - (ATM_MANUFACT & FLASH_VENDMASK) | - (ATM_ID_BV1614 & FLASH_TYPEMASK); - flash_info[i].size = FLASH_BANK_SIZE; - flash_info[i].sector_count = CFG_MAX_FLASH_SECT; - memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); - if (i == 0) - flashbase = PHYS_FLASH_1; - else - panic("configured to many flash banks!\n"); - for (j = 0; j < flash_info[i].sector_count; j++) - { - - if (j <= 9) - { - /* 1st to 8th are 8 KB */ - if (j <= 7) - { - flash_info[i].start[j] = flashbase + j*0x2000; - } + volatile u16 manuf_code, device_code, add_device_code; - /* 9th and 10th are both 32 KB */ - if ((j == 8) || (j == 9)) - { - flash_info[i].start[j] = flashbase + 0x10000 + (j-8)*0x8000; - } - } - else - { - flash_info[i].start[j] = flashbase + (j-8)*MAIN_SECT_SIZE; - } - } - size += flash_info[i].size; - } + IDENT_FLASH_ADDR1 = FLASH_CODE1; + IDENT_FLASH_ADDR2 = FLASH_CODE2; + IDENT_FLASH_ADDR1 = ID_IN_CODE; - flash_protect(FLAG_PROTECT_SET, - CFG_FLASH_BASE, - CFG_ENV_ADDR - 1, - &flash_info[0]); + manuf_code = *(volatile u16 *) CFG_FLASH_BASE; + device_code = *(volatile u16 *) (CFG_FLASH_BASE + 2); + add_device_code = *(volatile u16 *) (CFG_FLASH_BASE + (3 << 1)); - flash_protect(FLAG_PROTECT_SET, - CFG_ENV_ADDR, - CFG_ENV_ADDR + CFG_ENV_SIZE - 1, - &flash_info[0]); + IDENT_FLASH_ADDR1 = FLASH_CODE1; + IDENT_FLASH_ADDR2 = FLASH_CODE2; + IDENT_FLASH_ADDR1 = ID_OUT_CODE; - return size; -} + /* Vendor type */ + info->flash_id = ATM_MANUFACT & FLASH_VENDMASK; + printf ("Atmel: "); -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - - switch (info->flash_id & FLASH_VENDMASK) - { - case (ATM_MANUFACT & FLASH_VENDMASK): - printf("Atmel: "); - break; - default: - printf("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) - { - case (ATM_ID_BV1614 & FLASH_TYPEMASK): - printf("AT49BV1614 (16Mbit)\n"); - break; - default: - printf("Unknown Chip Type\n"); - goto Done; - break; - } - - printf(" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf(" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; i++) - { - if ((i % 5) == 0) - { - printf ("\n "); - } - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); + if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV1614 & FLASH_TYPEMASK)) { + + if ((add_device_code & FLASH_TYPEMASK) == + (ATM_ID_BV1614A & FLASH_TYPEMASK)) { + info->flash_id |= ATM_ID_BV1614A & FLASH_TYPEMASK; + printf ("AT49BV1614A (16Mbit)\n"); + } -Done: + } else { /* AT49BV1614 Flash */ + info->flash_id |= ATM_ID_BV1614 & FLASH_TYPEMASK; + printf ("AT49BV1614 (16Mbit)\n"); + } } -/*----------------------------------------------------------------------- - */ -int flash_erase (flash_info_t *info, int s_first, int s_last) +ulong flash_init (void) { - ulong result; - int iflag, cflag, prot, sect; - int rc = ERR_OK; - int chip1; + int i, j, k; + unsigned int flash_nb_blocks, sector; + unsigned int start_address; + OrgDef *pOrgDef; + + ulong size = 0; - /* first look for protection bits */ + for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { + ulong flashbase = 0; - if (info->flash_id == FLASH_UNKNOWN) - return ERR_UNKNOWN_FLASH_TYPE; + flash_identification (&flash_info[i]); - if ((s_first < 0) || (s_first > s_last)) { - return ERR_INVAL; - } + flash_info[i].size = FLASH_BANK_SIZE; - if ((info->flash_id & FLASH_VENDMASK) != - (ATM_MANUFACT & FLASH_VENDMASK)) { - return ERR_UNKNOWN_FLASH_VENDOR; - } + if ((flash_info[i].flash_id & FLASH_TYPEMASK) == + (ATM_ID_BV1614 & FLASH_TYPEMASK)) { + flash_info[i].sector_count = CFG_MAX_FLASH_SECT; + memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; + pOrgDef = OrgAT49BV16x4; + flash_nb_blocks = sizeof (OrgAT49BV16x4) / sizeof (OrgDef); + } else { /* AT49BV1614A Flash */ + flash_info[i].sector_count = CFG_MAX_FLASH_SECT - 1; + memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT - 1); + + pOrgDef = OrgAT49BV16x4A; + flash_nb_blocks = sizeof (OrgAT49BV16x4A) / sizeof (OrgDef); + } + + if (i == 0) + flashbase = PHYS_FLASH_1; + else + panic ("configured to many flash banks!\n"); + + sector = 0; + start_address = flashbase; + + for (j = 0; j < flash_nb_blocks; j++) { + for (k = 0; k < pOrgDef[j].sector_number; k++) { + flash_info[i].start[sector++] = start_address; + start_address += pOrgDef[j].sector_size; + } + } + + size += flash_info[i].size; } - } - if (prot) - return ERR_PROTECTED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - cflag = icache_status(); - icache_disable(); - iflag = disable_interrupts(); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last && !ctrlc(); sect++) - { - printf("Erasing sector %2d ... ", sect); - /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); + /* Protect binary boot image */ + flash_protect (FLAG_PROTECT_SET, + CFG_FLASH_BASE, + CFG_FLASH_BASE + CFG_BOOT_SIZE - 1, &flash_info[0]); - if (info->protect[sect] == 0) - { /* not protected */ - volatile u16 *addr = (volatile u16 *)(info->start[sect]); + /* Protect environment variables */ + flash_protect (FLAG_PROTECT_SET, + CFG_ENV_ADDR, + CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]); - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; + /* Protect U-Boot gzipped image */ + flash_protect (FLAG_PROTECT_SET, + CFG_U_BOOT_BASE, + CFG_U_BOOT_BASE + CFG_U_BOOT_SIZE - 1, &flash_info[0]); + + return size; +} - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - *addr = CMD_ERASE_CONFIRM; +/*----------------------------------------------------------------------- + */ +void flash_print_info (flash_info_t * info) +{ + int i; + + switch (info->flash_id & FLASH_VENDMASK) { + case (ATM_MANUFACT & FLASH_VENDMASK): + printf ("Atmel: "); + break; + default: + printf ("Unknown Vendor "); + break; + } - /* wait until flash is ready */ - chip1 = 0; + switch (info->flash_id & FLASH_TYPEMASK) { + case (ATM_ID_BV1614 & FLASH_TYPEMASK): + printf ("AT49BV1614 (16Mbit)\n"); + break; + case (ATM_ID_BV1614A & FLASH_TYPEMASK): + printf ("AT49BV1614A (16Mbit)\n"); + break; + default: + printf ("Unknown Chip Type\n"); + goto Done; + break; + } - do - { - result = *addr; + printf (" Size: %ld MB in %d Sectors\n", + info->size >> 20, info->sector_count); - /* check timeout */ - if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) - { - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; - chip1 = TMO; - break; + printf (" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; i++) { + if ((i % 5) == 0) { + printf ("\n "); } + printf (" %08lX%s", info->start[i], + info->protect[i] ? " (RO)" : " "); + } + printf ("\n"); - if (!chip1 && (result & 0xFFFF) & BIT_ERASE_DONE) - chip1 = READY; + Done: +} - } while (!chip1); +/*----------------------------------------------------------------------- + */ - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; +int flash_erase (flash_info_t * info, int s_first, int s_last) +{ + ulong result; + int iflag, cflag, prot, sect; + int rc = ERR_OK; + int chip1; - if (chip1 == ERR) - { - rc = ERR_PROG_ERROR; - goto outahere; - } - if (chip1 == TMO) - { - rc = ERR_TIMOUT; - goto outahere; - } - - printf("ok.\n"); + /* first look for protection bits */ + + if (info->flash_id == FLASH_UNKNOWN) + return ERR_UNKNOWN_FLASH_TYPE; + + if ((s_first < 0) || (s_first > s_last)) { + return ERR_INVAL; } - else /* it was protected */ - { - printf("protected!\n"); + + if ((info->flash_id & FLASH_VENDMASK) != + (ATM_MANUFACT & FLASH_VENDMASK)) { + return ERR_UNKNOWN_FLASH_VENDOR; } - } - if (ctrlc()) - printf("User Interrupt!\n"); + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + if (prot) + return ERR_PROTECTED; + + /* + * Disable interrupts which might cause a timeout + * here. Remember that our exception vectors are + * at address 0 in the flash, and we don't want a + * (ticker) exception to happen while the flash + * chip is in programming mode. + */ + cflag = icache_status (); + icache_disable (); + iflag = disable_interrupts (); + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { + printf ("Erasing sector %2d ... ", sect); + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked (); + + if (info->protect[sect] == 0) { /* not protected */ + volatile u16 *addr = (volatile u16 *) (info->start[sect]); + + MEM_FLASH_ADDR1 = CMD_UNLOCK1; + MEM_FLASH_ADDR2 = CMD_UNLOCK2; + MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; + + MEM_FLASH_ADDR1 = CMD_UNLOCK1; + MEM_FLASH_ADDR2 = CMD_UNLOCK2; + *addr = CMD_ERASE_CONFIRM; + + /* wait until flash is ready */ + chip1 = 0; + + do { + result = *addr; + + /* check timeout */ + if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { + MEM_FLASH_ADDR1 = CMD_READ_ARRAY; + chip1 = TMO; + break; + } + + if (!chip1 && (result & 0xFFFF) & BIT_ERASE_DONE) + chip1 = READY; + + } while (!chip1); + + MEM_FLASH_ADDR1 = CMD_READ_ARRAY; + + if (chip1 == ERR) { + rc = ERR_PROG_ERROR; + goto outahere; + } + if (chip1 == TMO) { + rc = ERR_TIMOUT; + goto outahere; + } + + printf ("ok.\n"); + } else { /* it was protected */ + printf ("protected!\n"); + } + } + + if (ctrlc ()) + printf ("User Interrupt!\n"); outahere: - /* allow flash to settle - wait 10 ms */ - udelay_masked(10000); + /* allow flash to settle - wait 10 ms */ + udelay_masked (10000); - if (iflag) - enable_interrupts(); + if (iflag) + enable_interrupts (); - if (cflag) - icache_enable(); + if (cflag) + icache_enable (); - return rc; + return rc; } /*----------------------------------------------------------------------- * Copy memory to flash */ -volatile static int write_word (flash_info_t *info, ulong dest, ulong data) +volatile static int write_word (flash_info_t * info, ulong dest, + ulong data) { - volatile u16 *addr = (volatile u16 *)dest; - ulong result; - int rc = ERR_OK; - int cflag, iflag; - int chip1; - - /* - * Check if Flash is (sufficiently) erased - */ - result = *addr; - if ((result & data) != data) - return ERR_NOT_ERASED; - - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - cflag = icache_status(); - icache_disable(); - iflag = disable_interrupts(); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_PROGRAM; - *addr = data; - - /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); - - /* wait until flash is ready */ - chip1 = 0; - do - { + volatile u16 *addr = (volatile u16 *) dest; + ulong result; + int rc = ERR_OK; + int cflag, iflag; + int chip1; + + /* + * Check if Flash is (sufficiently) erased + */ result = *addr; + if ((result & data) != data) + return ERR_NOT_ERASED; + + + /* + * Disable interrupts which might cause a timeout + * here. Remember that our exception vectors are + * at address 0 in the flash, and we don't want a + * (ticker) exception to happen while the flash + * chip is in programming mode. + */ + cflag = icache_status (); + icache_disable (); + iflag = disable_interrupts (); + + MEM_FLASH_ADDR1 = CMD_UNLOCK1; + MEM_FLASH_ADDR2 = CMD_UNLOCK2; + MEM_FLASH_ADDR1 = CMD_PROGRAM; + *addr = data; - /* check timeout */ - if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) - { - chip1 = ERR | TMO; - break; - } - if (!chip1 && ((result & 0x80) == (data & 0x80))) - chip1 = READY; + /* arm simple, non interrupt dependent timer */ + reset_timer_masked (); - } while (!chip1); + /* wait until flash is ready */ + chip1 = 0; + do { + result = *addr; - *addr = CMD_READ_ARRAY; + /* check timeout */ + if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { + chip1 = ERR | TMO; + break; + } + if (!chip1 && ((result & 0x80) == (data & 0x80))) + chip1 = READY; + + } while (!chip1); - if (chip1 == ERR || *addr != data) - rc = ERR_PROG_ERROR; + *addr = CMD_READ_ARRAY; + + if (chip1 == ERR || *addr != data) + rc = ERR_PROG_ERROR; - if (iflag) - enable_interrupts(); + if (iflag) + enable_interrupts (); - if (cflag) - icache_enable(); + if (cflag) + icache_enable (); - return rc; + return rc; } /*----------------------------------------------------------------------- * Copy memory to flash. */ -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) +int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) { - ulong wp, data; - int rc; + ulong wp, data; + int rc; - if(addr & 1) { - printf("unaligned destination not supported\n"); - return ERR_ALIGN; - }; + if (addr & 1) { + printf ("unaligned destination not supported\n"); + return ERR_ALIGN; + }; - if((int)src & 1) { - printf("unaligned source not supported\n"); - return ERR_ALIGN; - }; + if ((int) src & 1) { + printf ("unaligned source not supported\n"); + return ERR_ALIGN; + }; - wp = addr; + wp = addr; - while (cnt >= 2) { - data = *((volatile u16*)src); - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - src += 2; - wp += 2; - cnt -= 2; - } - - if(cnt == 1) { - data = (*((volatile u8*)src)) | (*((volatile u8*)(wp+1)) << 8); - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); + while (cnt >= 2) { + data = *((volatile u16 *) src); + if ((rc = write_word (info, wp, data)) != 0) { + return (rc); + } + src += 2; + wp += 2; + cnt -= 2; } - src += 1; - wp += 1; - cnt -= 1; - }; - return ERR_OK; + if (cnt == 1) { + data = (*((volatile u8 *) src)) | (*((volatile u8 *) (wp + 1)) << + 8); + if ((rc = write_word (info, wp, data)) != 0) { + return (rc); + } + src += 1; + wp += 1; + cnt -= 1; + }; + + return ERR_OK; } diff --git a/board/kup4k/kup4k.c b/board/kup4k/kup4k.c index b3ede17..7981df3 100644 --- a/board/kup4k/kup4k.c +++ b/board/kup4k/kup4k.c @@ -299,12 +299,6 @@ int misc_init_r (void) void lcd_logo (bd_t * bd) { - - - volatile immap_t *immap = (immap_t *) CFG_IMMR; - - - FB_INFO_S1D13xxx fb_info; S1D_INDEX s1dReg; S1D_VALUE s1dValue; @@ -328,8 +322,8 @@ void lcd_logo (bd_t * bd) /**/ /*----------------------------------------------------------------------------- */ memctl = &immr->im_memctl; -/* memctl->memc_or5 = 0xFFC007F0; / * 4 MB 17 WS or externel TA */ -/* memctl->memc_br5 = 0x80000801; / * Start at 0x80000000 */ +/* memctl->memc_or5 = 0xFFC007F0; / * 4 MB 17 WS or externel TA */ +/* memctl->memc_br5 = 0x80000801; / * Start at 0x80000000 */ memctl->memc_or5 = 0xFFC00708; /* 4 MB 17 WS or externel TA */ memctl->memc_br5 = 0x80080801; /* Start at 0x80080000 */ |