diff options
author | Tom Rini <trini@konsulko.com> | 2016-02-08 14:48:04 (GMT) |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2016-02-08 14:48:04 (GMT) |
commit | 57dc53a72460e8e301fa1cc7951b41db8e731485 (patch) | |
tree | 856a679e994fdc529a97763e851ed2e546ba3742 /board | |
parent | 7b6dc11c1aa69e5cc22d1659f50594edcfab5a9e (diff) | |
parent | 2300184f702656b72394e458bf15f7aaba8af892 (diff) | |
download | u-boot-fsl-qoriq-57dc53a72460e8e301fa1cc7951b41db8e731485.tar.xz |
Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-staging
Diffstat (limited to 'board')
133 files changed, 317 insertions, 317 deletions
diff --git a/board/bct-brettl2/Makefile b/board/bct-brettl2/Makefile index 12154b6..28fccc0 100644 --- a/board/bct-brettl2/Makefile +++ b/board/bct-brettl2/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/bct-brettl2/bct-brettl2.c b/board/bct-brettl2/bct-brettl2.c index bf7cd62..adb8605 100644 --- a/board/bct-brettl2/bct-brettl2.c +++ b/board/bct-brettl2/bct-brettl2.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file for BCT brettl2 + * U-Boot - main board file for BCT brettl2 * * Copyright (c) 2010 BCT Electronic GmbH * diff --git a/board/bf506f-ezkit/Makefile b/board/bf506f-ezkit/Makefile index 0f134f9..7efe1bc 100644 --- a/board/bf506f-ezkit/Makefile +++ b/board/bf506f-ezkit/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/bf506f-ezkit/bf506f-ezkit.c b/board/bf506f-ezkit/bf506f-ezkit.c index 638500d..77e40ae 100644 --- a/board/bf506f-ezkit/bf506f-ezkit.c +++ b/board/bf506f-ezkit/bf506f-ezkit.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2008-2010 Analog Devices Inc. * diff --git a/board/bf518f-ezbrd/Makefile b/board/bf518f-ezbrd/Makefile index 3a6abaa..e9e23ed 100644 --- a/board/bf518f-ezbrd/Makefile +++ b/board/bf518f-ezbrd/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/bf518f-ezbrd/bf518f-ezbrd.c b/board/bf518f-ezbrd/bf518f-ezbrd.c index bf4a7db..a14e509 100644 --- a/board/bf518f-ezbrd/bf518f-ezbrd.c +++ b/board/bf518f-ezbrd/bf518f-ezbrd.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2008-2009 Analog Devices Inc. * diff --git a/board/bf525-ucr2/Makefile b/board/bf525-ucr2/Makefile index 8de71a1..1be1d31 100644 --- a/board/bf525-ucr2/Makefile +++ b/board/bf525-ucr2/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/bf525-ucr2/bf525-ucr2.c b/board/bf525-ucr2/bf525-ucr2.c index 3e6df1f..36a725c 100644 --- a/board/bf525-ucr2/bf525-ucr2.c +++ b/board/bf525-ucr2/bf525-ucr2.c @@ -1,4 +1,4 @@ -/* U-boot - bf525-ucr2.c board specific routines +/* U-Boot - bf525-ucr2.c board specific routines * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. diff --git a/board/bf526-ezbrd/Makefile b/board/bf526-ezbrd/Makefile index 34ac563..c4882c9 100644 --- a/board/bf526-ezbrd/Makefile +++ b/board/bf526-ezbrd/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/bf526-ezbrd/bf526-ezbrd.c b/board/bf526-ezbrd/bf526-ezbrd.c index db1ee28..a506d1b 100644 --- a/board/bf526-ezbrd/bf526-ezbrd.c +++ b/board/bf526-ezbrd/bf526-ezbrd.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2009 Analog Devices Inc. * diff --git a/board/bf527-ad7160-eval/Makefile b/board/bf527-ad7160-eval/Makefile index 9d8ecf1..c225f72 100644 --- a/board/bf527-ad7160-eval/Makefile +++ b/board/bf527-ad7160-eval/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/bf527-ad7160-eval/bf527-ad7160-eval.c b/board/bf527-ad7160-eval/bf527-ad7160-eval.c index ea405b6..9180630 100644 --- a/board/bf527-ad7160-eval/bf527-ad7160-eval.c +++ b/board/bf527-ad7160-eval/bf527-ad7160-eval.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2010 Analog Devices Inc. * diff --git a/board/bf527-ezkit/Makefile b/board/bf527-ezkit/Makefile index cedd821..53ec9e7 100644 --- a/board/bf527-ezkit/Makefile +++ b/board/bf527-ezkit/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/bf527-ezkit/bf527-ezkit.c b/board/bf527-ezkit/bf527-ezkit.c index b551d4e..c4f58fa 100644 --- a/board/bf527-ezkit/bf527-ezkit.c +++ b/board/bf527-ezkit/bf527-ezkit.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2009 Analog Devices Inc. * diff --git a/board/bf527-sdp/Makefile b/board/bf527-sdp/Makefile index 1ddb026..77acb42 100644 --- a/board/bf527-sdp/Makefile +++ b/board/bf527-sdp/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/bf527-sdp/bf527-sdp.c b/board/bf527-sdp/bf527-sdp.c index 504869d..0c6094b 100644 --- a/board/bf527-sdp/bf527-sdp.c +++ b/board/bf527-sdp/bf527-sdp.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2010 Analog Devices Inc. * diff --git a/board/bf533-ezkit/Makefile b/board/bf533-ezkit/Makefile index 6838cf0..bf7a2c4 100644 --- a/board/bf533-ezkit/Makefile +++ b/board/bf533-ezkit/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2007 Analog Device Inc. # diff --git a/board/bf533-ezkit/bf533-ezkit.c b/board/bf533-ezkit/bf533-ezkit.c index 81e390c..6879319 100644 --- a/board/bf533-ezkit/bf533-ezkit.c +++ b/board/bf533-ezkit/bf533-ezkit.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2008 Analog Devices Inc. * diff --git a/board/bf533-ezkit/flash-defines.h b/board/bf533-ezkit/flash-defines.h index fa32203..7822a9d 100644 --- a/board/bf533-ezkit/flash-defines.h +++ b/board/bf533-ezkit/flash-defines.h @@ -1,5 +1,5 @@ /* - * U-boot - flash-defines.h + * U-Boot - flash-defines.h * * Copyright (c) 2005-2007 Analog Devices Inc. * diff --git a/board/bf533-ezkit/flash.c b/board/bf533-ezkit/flash.c index fd06b31..3180a76 100644 --- a/board/bf533-ezkit/flash.c +++ b/board/bf533-ezkit/flash.c @@ -1,5 +1,5 @@ /* - * U-boot - flash.c Flash driver for PSD4256GV + * U-Boot - flash.c Flash driver for PSD4256GV * * Copyright (c) 2005-2007 Analog Devices Inc. * This file is based on BF533EzFlash.c originally written by Analog Devices, Inc. diff --git a/board/bf533-ezkit/psd4256.h b/board/bf533-ezkit/psd4256.h index 56c6442..9256696 100644 --- a/board/bf533-ezkit/psd4256.h +++ b/board/bf533-ezkit/psd4256.h @@ -1,5 +1,5 @@ /* - * U-boot - psd4256.h + * U-Boot - psd4256.h * * Copyright (c) 2005-2007 Analog Devices Inc. * diff --git a/board/bf533-stamp/Makefile b/board/bf533-stamp/Makefile index 244f9e0..041c98e 100644 --- a/board/bf533-stamp/Makefile +++ b/board/bf533-stamp/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/bf533-stamp/bf533-stamp.c b/board/bf533-stamp/bf533-stamp.c index 585f5f1..eb000a6 100644 --- a/board/bf533-stamp/bf533-stamp.c +++ b/board/bf533-stamp/bf533-stamp.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2008 Analog Devices Inc. * diff --git a/board/bf537-minotaur/Makefile b/board/bf537-minotaur/Makefile index 66d2f05..13ed8bf 100644 --- a/board/bf537-minotaur/Makefile +++ b/board/bf537-minotaur/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/bf537-minotaur/bf537-minotaur.c b/board/bf537-minotaur/bf537-minotaur.c index 9312216..34750ec 100644 --- a/board/bf537-minotaur/bf537-minotaur.c +++ b/board/bf537-minotaur/bf537-minotaur.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2009 Analog Devices Inc. * diff --git a/board/bf537-pnav/Makefile b/board/bf537-pnav/Makefile index ffcdf1f..f7af8cd 100644 --- a/board/bf537-pnav/Makefile +++ b/board/bf537-pnav/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/bf537-pnav/bf537-pnav.c b/board/bf537-pnav/bf537-pnav.c index 6739fe1..c3b06f0 100644 --- a/board/bf537-pnav/bf537-pnav.c +++ b/board/bf537-pnav/bf537-pnav.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2009 Analog Devices Inc. * diff --git a/board/bf537-srv1/Makefile b/board/bf537-srv1/Makefile index cd0da27..1815fc5 100644 --- a/board/bf537-srv1/Makefile +++ b/board/bf537-srv1/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/bf537-srv1/bf537-srv1.c b/board/bf537-srv1/bf537-srv1.c index b0ffe1a..fc22c07 100644 --- a/board/bf537-srv1/bf537-srv1.c +++ b/board/bf537-srv1/bf537-srv1.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2009 Analog Devices Inc. * diff --git a/board/bf537-stamp/Makefile b/board/bf537-stamp/Makefile index 234119a..4008e3a 100644 --- a/board/bf537-stamp/Makefile +++ b/board/bf537-stamp/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2007 Analog Device Inc. # diff --git a/board/bf537-stamp/bf537-stamp.c b/board/bf537-stamp/bf537-stamp.c index 85d41d0..9b9daf4 100644 --- a/board/bf537-stamp/bf537-stamp.c +++ b/board/bf537-stamp/bf537-stamp.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2008 Analog Devices Inc. * diff --git a/board/bf538f-ezkit/Makefile b/board/bf538f-ezkit/Makefile index 7c8cda0..eb1703e 100644 --- a/board/bf538f-ezkit/Makefile +++ b/board/bf538f-ezkit/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/bf538f-ezkit/bf538f-ezkit.c b/board/bf538f-ezkit/bf538f-ezkit.c index 49d30e7..2dd4c0c 100644 --- a/board/bf538f-ezkit/bf538f-ezkit.c +++ b/board/bf538f-ezkit/bf538f-ezkit.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2008 Analog Devices Inc. * diff --git a/board/bf548-ezkit/Makefile b/board/bf548-ezkit/Makefile index 6f4200b..e4d0caa 100644 --- a/board/bf548-ezkit/Makefile +++ b/board/bf548-ezkit/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/bf548-ezkit/bf548-ezkit.c b/board/bf548-ezkit/bf548-ezkit.c index cb9ee86..31d6eee 100644 --- a/board/bf548-ezkit/bf548-ezkit.c +++ b/board/bf548-ezkit/bf548-ezkit.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2008 Analog Devices Inc. * diff --git a/board/bf561-acvilon/Makefile b/board/bf561-acvilon/Makefile index 48bec28..08e2fad 100644 --- a/board/bf561-acvilon/Makefile +++ b/board/bf561-acvilon/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2007 Analog Device Inc. # diff --git a/board/bf561-ezkit/Makefile b/board/bf561-ezkit/Makefile index 23c7101..3d534d2 100644 --- a/board/bf561-ezkit/Makefile +++ b/board/bf561-ezkit/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2007 Analog Device Inc. # diff --git a/board/bf561-ezkit/bf561-ezkit.c b/board/bf561-ezkit/bf561-ezkit.c index 8441838..534c39c 100644 --- a/board/bf561-ezkit/bf561-ezkit.c +++ b/board/bf561-ezkit/bf561-ezkit.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2008 Analog Devices Inc. * diff --git a/board/bf609-ezkit/Makefile b/board/bf609-ezkit/Makefile index 3bfd088..e4184ee 100644 --- a/board/bf609-ezkit/Makefile +++ b/board/bf609-ezkit/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/bf609-ezkit/bf609-ezkit.c b/board/bf609-ezkit/bf609-ezkit.c index 86da028..c993ca6 100644 --- a/board/bf609-ezkit/bf609-ezkit.c +++ b/board/bf609-ezkit/bf609-ezkit.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2008-2011 Analog Devices Inc. * diff --git a/board/bf609-ezkit/soft_switch.c b/board/bf609-ezkit/soft_switch.c index e0c8d93..7c117ea 100644 --- a/board/bf609-ezkit/soft_switch.c +++ b/board/bf609-ezkit/soft_switch.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2008-2011 Analog Devices Inc. * diff --git a/board/bf609-ezkit/soft_switch.h b/board/bf609-ezkit/soft_switch.h index d147fe1..75d64e2 100644 --- a/board/bf609-ezkit/soft_switch.h +++ b/board/bf609-ezkit/soft_switch.h @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2008-2011 Analog Devices Inc. * diff --git a/board/blackstamp/Makefile b/board/blackstamp/Makefile index 38e5da7..2ae79da 100644 --- a/board/blackstamp/Makefile +++ b/board/blackstamp/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/blackstamp/blackstamp.c b/board/blackstamp/blackstamp.c index 06d004a..d233b8a 100644 --- a/board/blackstamp/blackstamp.c +++ b/board/blackstamp/blackstamp.c @@ -1,5 +1,5 @@ /* - * U-boot - blackstamp.c BlackStamp board specific routines + * U-Boot - blackstamp.c BlackStamp board specific routines * Most code stolen from boards/bf533-stamp/bf533-stamp.c * Edited to the BlackStamp by Ben Matthews for UR LLE * diff --git a/board/blackvme/Makefile b/board/blackvme/Makefile index 4ff989a..9a61775 100644 --- a/board/blackvme/Makefile +++ b/board/blackvme/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/blackvme/blackvme.c b/board/blackvme/blackvme.c index eccdaf3..d8932ed 100644 --- a/board/blackvme/blackvme.c +++ b/board/blackvme/blackvme.c @@ -1,4 +1,4 @@ -/* U-boot - blackvme.c board specific routines +/* U-Boot - blackvme.c board specific routines * (c) Wojtek Skulski 2010 info@skutek.com * Board info: http://www.skutek.com * Copyright (c) 2005-2009 Analog Devices Inc. diff --git a/board/br4/Makefile b/board/br4/Makefile index 68e24ab..c6c03ab 100644 --- a/board/br4/Makefile +++ b/board/br4/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) Switchfin Org. <dpn@switchfin.org> # diff --git a/board/br4/br4.c b/board/br4/br4.c index bc034e3..6f3f170 100644 --- a/board/br4/br4.c +++ b/board/br4/br4.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) Switchfin Org. <dpn@switchfin.org> * diff --git a/board/cm-bf527/Makefile b/board/cm-bf527/Makefile index ff8ad43..1d662c6 100644 --- a/board/cm-bf527/Makefile +++ b/board/cm-bf527/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/cm-bf527/cm-bf527.c b/board/cm-bf527/cm-bf527.c index 3186c67..0c2138b 100644 --- a/board/cm-bf527/cm-bf527.c +++ b/board/cm-bf527/cm-bf527.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2009 Analog Devices Inc. * diff --git a/board/cm-bf533/Makefile b/board/cm-bf533/Makefile index ec99638..41e100d 100644 --- a/board/cm-bf533/Makefile +++ b/board/cm-bf533/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/cm-bf533/cm-bf533.c b/board/cm-bf533/cm-bf533.c index a863195..02ef076 100644 --- a/board/cm-bf533/cm-bf533.c +++ b/board/cm-bf533/cm-bf533.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2008 Analog Devices Inc. * diff --git a/board/cm-bf537e/Makefile b/board/cm-bf537e/Makefile index be8056f..317098c 100644 --- a/board/cm-bf537e/Makefile +++ b/board/cm-bf537e/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/cm-bf537e/cm-bf537e.c b/board/cm-bf537e/cm-bf537e.c index 57c72a2..7e4cfc2 100644 --- a/board/cm-bf537e/cm-bf537e.c +++ b/board/cm-bf537e/cm-bf537e.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2009 Analog Devices Inc. * diff --git a/board/cm-bf537u/Makefile b/board/cm-bf537u/Makefile index 38dd3fb..835d5b7 100644 --- a/board/cm-bf537u/Makefile +++ b/board/cm-bf537u/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/cm-bf537u/cm-bf537u.c b/board/cm-bf537u/cm-bf537u.c index f365cdb..aad72a9 100644 --- a/board/cm-bf537u/cm-bf537u.c +++ b/board/cm-bf537u/cm-bf537u.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2009 Analog Devices Inc. * diff --git a/board/cm-bf548/Makefile b/board/cm-bf548/Makefile index 98aca32..1e11b8c 100644 --- a/board/cm-bf548/Makefile +++ b/board/cm-bf548/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/cm-bf548/cm-bf548.c b/board/cm-bf548/cm-bf548.c index 90ce4c3..d9d018b 100644 --- a/board/cm-bf548/cm-bf548.c +++ b/board/cm-bf548/cm-bf548.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2008 Analog Devices Inc. * diff --git a/board/cm-bf561/Makefile b/board/cm-bf561/Makefile index c8764fb..e0f0c34 100644 --- a/board/cm-bf561/Makefile +++ b/board/cm-bf561/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/cm-bf561/cm-bf561.c b/board/cm-bf561/cm-bf561.c index 5741f64..99b7eb2 100644 --- a/board/cm-bf561/cm-bf561.c +++ b/board/cm-bf561/cm-bf561.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2008 Analog Devices Inc. * diff --git a/board/congatec/cgtqmx6eval/README b/board/congatec/cgtqmx6eval/README index f2c9599..0777c78 100644 --- a/board/congatec/cgtqmx6eval/README +++ b/board/congatec/cgtqmx6eval/README @@ -3,10 +3,10 @@ U-Boot for the Congatec QMX6 boards This file contains information for the port of U-Boot to the Congatec QMX6 boards. -1. Building U-boot +1. Building U-Boot ------------------ -- Build U-boot for Congatec QMX6 boards: +- Build U-Boot for Congatec QMX6 boards: $ make mrproper $ make cgtqmx6eval_defconfig @@ -17,7 +17,7 @@ This will generate the following binaries: - SPL - u-boot.img -2. Flashing U-boot in the SPI NOR +2. Flashing U-Boot in the SPI NOR --------------------------------- Copy SPL and u-boot.img to the exported TFTP directory of the @@ -41,7 +41,7 @@ host PC (/tftpboot , for example). => sf write 0x12000000 0x10000 0x70000 -Reboot the board and the new U-boot should come up. +Reboot the board and the new U-Boot should come up. 3. Booting from the SD card --------------------------- @@ -64,9 +64,9 @@ command: => bmode esdhc4 -And then the U-boot from the big slot will boot. +And then the U-Boot from the big slot will boot. -Note: If the "bmode" command is not available from your pre-installed U-boot, +Note: If the "bmode" command is not available from your pre-installed U-Boot, these instruction will produce the same effect: => mw.l 0x20d8040 0x3850 diff --git a/board/dnp5370/Makefile b/board/dnp5370/Makefile index 865522f..c0271da 100644 --- a/board/dnp5370/Makefile +++ b/board/dnp5370/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2007 Analog Device Inc. # diff --git a/board/dnp5370/dnp5370.c b/board/dnp5370/dnp5370.c index ae9ba84..56e3b02 100644 --- a/board/dnp5370/dnp5370.c +++ b/board/dnp5370/dnp5370.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * (C) Copyright 2010 3ality Digital Systems * diff --git a/board/embest/mx6boards/mx6boards.c b/board/embest/mx6boards/mx6boards.c index f8c7468..ad7a8cf 100644 --- a/board/embest/mx6boards/mx6boards.c +++ b/board/embest/mx6boards/mx6boards.c @@ -221,7 +221,7 @@ int board_mmc_init(bd_t *bis) /* * According to the board_mmc_init() the following map is done: - * (U-boot device node) (Physical Port) + * (U-Boot device node) (Physical Port) * ** RiOTboard : * mmc0 SDCard slot (bottom) * mmc1 uSDCard slot (top) diff --git a/board/freescale/b4860qds/eth_b4860qds.c b/board/freescale/b4860qds/eth_b4860qds.c index 4b2303e..164ec0a 100644 --- a/board/freescale/b4860qds/eth_b4860qds.c +++ b/board/freescale/b4860qds/eth_b4860qds.c @@ -269,7 +269,7 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM1_DTSEC4, CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR); /* - * XFI does not need a PHY to work, but to make U-boot + * XFI does not need a PHY to work, but to make U-Boot * happy, assign a fake PHY address for a XFI port. */ fm_info_set_phy_address(FM1_10GEC1, 0); diff --git a/board/freescale/bsc9131rdb/README b/board/freescale/bsc9131rdb/README index 4902b98..c840597 100644 --- a/board/freescale/bsc9131rdb/README +++ b/board/freescale/bsc9131rdb/README @@ -86,9 +86,9 @@ Default Boot Method -------------------- NAND boot -Building U-boot +Building U-Boot -------------- -To build the u-boot for BSC9131RDB: +To build the U-Boot for BSC9131RDB: 1. NAND Flash with sysclk 66MHz(J16 on RDB closed, default) make BSC9131RDB_NAND 2. NAND Flash with sysclk 100MHz(J16 on RDB open) @@ -123,7 +123,7 @@ DDR Memory map Flashing Images --------------- -To place a new u-boot image in the NAND flash and then boot +To place a new U-Boot image in the NAND flash and then boot with that new image temporarily, use this: tftp 1000000 u-boot-nand.bin nand erase 0 100000 diff --git a/board/freescale/bsc9132qds/README b/board/freescale/bsc9132qds/README index f8377c9..ede95d4 100644 --- a/board/freescale/bsc9132qds/README +++ b/board/freescale/bsc9132qds/README @@ -87,9 +87,9 @@ Default Boot Method -------------------- NOR boot -Building U-boot +Building U-Boot -------------- -To build the u-boot for BSC9132QDS: +To build the U-Boot for BSC9132QDS: 1. NOR Flash make BSC9132QDS_NOR_DDRCLK100 : For 100MHZ DDR CLK make BSC9132QDS_NOR_DDRCLK133 : For 133MHZ DDR CLK @@ -122,7 +122,7 @@ Memory map Flashing Images --------------- -To place a new u-boot image in the NAND flash and then boot +To place a new U-Boot image in the NAND flash and then boot with that new image temporarily, use this: tftp 1000000 u-boot-nand.bin nand erase 0 100000 diff --git a/board/freescale/c29xpcie/README b/board/freescale/c29xpcie/README index 3bc396b..2e249cb 100644 --- a/board/freescale/c29xpcie/README +++ b/board/freescale/c29xpcie/README @@ -53,7 +53,7 @@ Settings of DIP-switch SW5[1:4]= 0110 and SW5[6]=0 for boot from SPI flash Note: 1 stands for 'off', 0 stands for 'on' -Build and program u-boot to NOR flash +Build and program U-Boot to NOR flash ================================== 1. Build u-boot.bin image example: export ARCH=powerpc @@ -86,7 +86,7 @@ There are four banks in C29XPCIE board, example to change bank booting: - bank 4 on the flash 0x3000000~0x3ffffff or set SW5[7]= ON/OFF and SW5[7]= ON/OFF, then power on again. -Build and program u-boot to SPI flash +Build and program U-Boot to SPI flash ================================== 1. Build u-boot-spi.bin image make C29xPCIE_SPIFLASH_config; make diff --git a/board/freescale/ls2080a/README b/board/freescale/ls2080a/README index 7e53f1f..646cc02 100644 --- a/board/freescale/ls2080a/README +++ b/board/freescale/ls2080a/README @@ -12,7 +12,7 @@ Memory map from core's view 0x05_1000_0000 .. 0x05_FFFF_FFFF IFC region #2 0x80_8000_0000 .. 0xFF_FFFF_FFFF DDR region #2 -Other addresses are either reserved, or not used directly by u-boot. +Other addresses are either reserved, or not used directly by U-Boot. This list should be updated when more addresses are used. Booting Linux flavors which do not support 48-bit VA (< Linux 3.18) diff --git a/board/freescale/ls2080aqds/README b/board/freescale/ls2080aqds/README index 375e97c..6ddad92 100644 --- a/board/freescale/ls2080aqds/README +++ b/board/freescale/ls2080aqds/README @@ -103,7 +103,7 @@ Memory map from core's view 0x05_1000_0000 .. 0x05_FFFF_FFFF IFC region #2 0x80_8000_0000 .. 0xFF_FFFF_FFFF DDR region #2 -Other addresses are either reserved, or not used directly by u-boot. +Other addresses are either reserved, or not used directly by U-Boot. This list should be updated when more addresses are used. IFC region map from core's view diff --git a/board/freescale/ls2080aqds/eth.c b/board/freescale/ls2080aqds/eth.c index ebc9d47..42ff743 100644 --- a/board/freescale/ls2080aqds/eth.c +++ b/board/freescale/ls2080aqds/eth.c @@ -716,7 +716,7 @@ void ls2080a_handle_phy_interface_xsgmii(int i) switch (serdes1_prtcl) { case 0x2A: /* - * XFI does not need a PHY to work, but to avoid U-boot use + * XFI does not need a PHY to work, but to avoid U-Boot use * default PHY address which is zero to a MAC when it found * a MAC has no PHY address, we give a PHY address to XFI * MAC, and should not use a real XAUI PHY address, since diff --git a/board/freescale/ls2080ardb/README b/board/freescale/ls2080ardb/README index 7fc2569..6708ca9 100644 --- a/board/freescale/ls2080ardb/README +++ b/board/freescale/ls2080ardb/README @@ -87,7 +87,7 @@ Memory map from core's view 0x05_1000_0000 .. 0x05_FFFF_FFFF IFC region #2 0x80_8000_0000 .. 0xFF_FFFF_FFFF DDR region #2 -Other addresses are either reserved, or not used directly by u-boot. +Other addresses are either reserved, or not used directly by U-Boot. This list should be updated when more addresses are used. IFC region map from core's view diff --git a/board/freescale/m52277evb/README b/board/freescale/m52277evb/README index 3178d49..92a8384 100644 --- a/board/freescale/m52277evb/README +++ b/board/freescale/m52277evb/README @@ -49,7 +49,7 @@ Changed files: - include/asm-m68k/timer.h Timer structure and definition - include/asm-m68k/types.h Data types definition - include/asm-m68k/uart.h Uart structure and definition -- include/asm-m68k/u-boot.h u-boot structure +- include/asm-m68k/u-boot.h U-Boot structure - include/configs/M52277EVB.h Board specific configuration file @@ -77,7 +77,7 @@ CONFIG_MCFRTC -- define to use common CF RTC driver CONFIG_SYS_MCFRTC_BASE -- provide base address for RTC in immap.h CONFIG_SYS_RTC_OSCILLATOR -- define RTC clock frequency RTC_DEBUG -- define to show RTC debug message -CONFIG_CMD_DATE -- enable to use date feature in u-boot +CONFIG_CMD_DATE -- enable to use date feature in U-Boot CONFIG_MCFTMR -- define to use DMA timer CONFIG_MCFPIT -- define to use PIT timer @@ -102,7 +102,7 @@ CONFIG_SYS_CSn_CTRL -- defines the Chip Select Control register CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base -CONFIG_LCD and CONFIG_CMD_USB are not supported in this current u-boot, +CONFIG_LCD and CONFIG_CMD_USB are not supported in this current U-Boot, update will be provided at later time 2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL @@ -113,7 +113,7 @@ update will be provided at later time SRAM: 0x80000000-0x8FFFFFFF (256MB) IP: 0xF0000000-0xFFFFFFFF (256MB) -2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and +2.2. For the initial bringup, we adopted a consistent memory scheme between U-Boot and linux kernel, you can customize it based on your system requirements: Flash0: 0x00000000-0x00FFFFFF (16MB) diff --git a/board/freescale/m5253evbe/README b/board/freescale/m5253evbe/README index f51609f..2ed5c76 100644 --- a/board/freescale/m5253evbe/README +++ b/board/freescale/m5253evbe/README @@ -13,7 +13,7 @@ Created 06/05/2007 2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL =========================================== -2.1. For the initial bringup, we adopted a consistent memory scheme between u-boot and +2.1. For the initial bringup, we adopted a consistent memory scheme between U-Boot and linux kernel, you can customize it based on your system requirements: SDR: 0x00000000-0x00ffffff SRAM0: 0x20010000-0x20017fff diff --git a/board/freescale/m53017evb/README b/board/freescale/m53017evb/README index 84fc1ec..224e79c 100644 --- a/board/freescale/m53017evb/README +++ b/board/freescale/m53017evb/README @@ -47,7 +47,7 @@ Changed files: - include/asm-m68k/timer.h Timer structure and definition - include/asm-m68k/types.h Data types definition - include/asm-m68k/uart.h Uart structure and definition -- include/asm-m68k/u-boot.h u-boot structure +- include/asm-m68k/u-boot.h U-Boot structure - include/configs/M53017EVB.h Board specific configuration file @@ -75,7 +75,7 @@ CONFIG_MCFRTC -- define to use common CF RTC driver CONFIG_SYS_MCFRTC_BASE -- provide base address for RTC in immap.h CONFIG_SYS_RTC_OSCILLATOR -- define RTC clock frequency RTC_DEBUG -- define to show RTC debug message -CONFIG_CMD_DATE -- enable to use date feature in u-boot +CONFIG_CMD_DATE -- enable to use date feature in U-Boot CONFIG_MCFFEC -- define to use common CF FEC driver CONFIG_MII -- enable to use MII driver @@ -118,7 +118,7 @@ CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base SRAM: 0x80000000-0x8FFFFFFF (256MB) IP: 0xFC000000-0xFFFFFFFF (256MB) -2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and +2.2. For the initial bringup, we adopted a consistent memory scheme between U-Boot and linux kernel, you can customize it based on your system requirements: Flash0: 0x00000000-0x00FFFFFF (16MB) DDR: 0x40000000-0x4FFFFFFF (256MB) diff --git a/board/freescale/m5373evb/README b/board/freescale/m5373evb/README index 52eac7b..582e0c3 100644 --- a/board/freescale/m5373evb/README +++ b/board/freescale/m5373evb/README @@ -46,7 +46,7 @@ Changed files: - include/asm-m68k/timer.h Timer structure and definition - include/asm-m68k/types.h Data types definition - include/asm-m68k/uart.h Uart structure and definition -- include/asm-m68k/u-boot.h u-boot structure +- include/asm-m68k/u-boot.h U-Boot structure - include/configs/M5373EVB.h Board specific configuration file @@ -74,7 +74,7 @@ CONFIG_MCFRTC -- define to use common CF RTC driver CONFIG_SYS_MCFRTC_BASE -- provide base address for RTC in immap.h CONFIG_SYS_RTC_OSCILLATOR -- define RTC clock frequency RTC_DEBUG -- define to show RTC debug message -CONFIG_CMD_DATE -- enable to use date feature in u-boot +CONFIG_CMD_DATE -- enable to use date feature in U-Boot CONFIG_MCFFEC -- define to use common CF FEC driver CONFIG_MII -- enable to use MII driver @@ -117,7 +117,7 @@ CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base SRAM: 0x80000000-0x8FFFFFFF (256MB) IP: 0xF0000000-0xFFFFFFFF (256MB) -2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and +2.2. For the initial bringup, we adopted a consistent memory scheme between U-Boot and linux kernel, you can customize it based on your system requirements: Flash0: 0x00000000-0x00FFFFFF (16MB) diff --git a/board/freescale/m54455evb/README b/board/freescale/m54455evb/README index c70c4c5..c563ad9 100644 --- a/board/freescale/m54455evb/README +++ b/board/freescale/m54455evb/README @@ -48,7 +48,7 @@ Changed files: - include/asm-m68k/timer.h Timer structure and definition - include/asm-m68k/types.h Data types definition - include/asm-m68k/uart.h Uart structure and definition -- include/asm-m68k/u-boot.h u-boot structure +- include/asm-m68k/u-boot.h U-Boot structure - include/configs/M54455EVB.h Board specific configuration file @@ -78,7 +78,7 @@ CONFIG_MCFRTC -- define to use common CF RTC driver CONFIG_SYS_MCFRTC_BASE -- provide base address for RTC in immap.h CONFIG_SYS_RTC_OSCILLATOR -- define RTC clock frequency RTC_DEBUG -- define to show RTC debug message -CONFIG_CMD_DATE -- enable to use date feature in u-boot +CONFIG_CMD_DATE -- enable to use date feature in U-Boot CONFIG_MCFFEC -- define to use common CF FEC driver CONFIG_MII -- enable to use MII driver @@ -91,7 +91,7 @@ CONFIG_SYS_FEC1_PINMUX -- Set FEC1 Pin configuration CONFIG_SYS_FEC0_MIIBASE -- Set FEC0 MII base register CONFIG_SYS_FEC1_MIIBASE -- Set FEC0 MII base register MCFFEC_TOUT_LOOP -- set FEC timeout loop -CONFIG_HAS_ETH1 -- define to enable second FEC in u-boot +CONFIG_HAS_ETH1 -- define to enable second FEC in U-Boot CONFIG_ISO_PARTITION -- enable ISO read/write CONFIG_DOS_PARTITION -- enable DOS read/write @@ -136,7 +136,7 @@ CONFIG_EXTRA_CLOCK -- Enable extra clock such as vco, flexbus, pci, etc CONFIG_SYS_MBAR -- define MBAR offset -CONFIG_SYS_ATMEL_BOOT -- To determine the u-boot is booted from Atmel or Intel +CONFIG_SYS_ATMEL_BOOT -- To determine the U-Boot is booted from Atmel or Intel CONFIG_MONITOR_IS_IN_RAM -- Not support @@ -163,7 +163,7 @@ CONFIG_SYS_SDRAM_BASE1 -- defines the DRAM Base 1 FlexBus: 0xC0000000-0xDFFFFFFF (512MB) IP: 0xF0000000-0xFFFFFFFF (256MB) -2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and +2.2. For the initial bringup, we adopted a consistent memory scheme between U-Boot and linux kernel, you can customize it based on your system requirements: Atmel boot: Flash0: 0x00000000-0x0007FFFF (512KB) diff --git a/board/freescale/m547xevb/README b/board/freescale/m547xevb/README index ce497c0..30c5ded 100644 --- a/board/freescale/m547xevb/README +++ b/board/freescale/m547xevb/README @@ -54,7 +54,7 @@ Changed files: - include/asm-m68k/timer.h Timer structure and definition - include/asm-m68k/types.h Data types definition - include/asm-m68k/uart.h Uart structure and definition -- include/asm-m68k/u-boot.h u-boot structure +- include/asm-m68k/u-boot.h U-Boot structure - include/configs/M5475EVB.h Board specific configuration file @@ -88,7 +88,7 @@ CONFIG_SYS_FEC1_PINMUX -- Set FEC1 Pin configuration CONFIG_SYS_FEC0_MIIBASE -- Set FEC0 MII base register CONFIG_SYS_FEC1_MIIBASE -- Set FEC0 MII base register MCFFEC_TOUT_LOOP -- set FEC timeout loop -CONFIG_HAS_ETH1 -- define to enable second FEC in u-boot +CONFIG_HAS_ETH1 -- define to enable second FEC in U-Boot CONFIG_CMD_USB -- enable USB commands CONFIG_USB_OHCI_NEW -- enable USB OHCI driver diff --git a/board/freescale/mpc8313erdb/README b/board/freescale/mpc8313erdb/README index be7ef32..697cee4 100644 --- a/board/freescale/mpc8313erdb/README +++ b/board/freescale/mpc8313erdb/README @@ -70,7 +70,7 @@ Freescale MPC8313ERDB Board 5. Downloading and Flashing Images -5.1 Reflash U-boot Image using U-boot +5.1 Reflash U-Boot Image using U-Boot NOR flash: @@ -81,7 +81,7 @@ Freescale MPC8313ERDB Board first, to make sure that the TFTP load will succeed before it goes ahead and wipes out your current firmware. And of course, have an alternate means of programming the flash available - if the new u-boot doesn't boot. + if the new U-Boot doesn't boot. NAND flash: diff --git a/board/freescale/mpc8315erdb/README b/board/freescale/mpc8315erdb/README index b32132d..8ad6d81 100644 --- a/board/freescale/mpc8315erdb/README +++ b/board/freescale/mpc8315erdb/README @@ -63,7 +63,7 @@ Freescale MPC8315ERDB Board 5. Downloading and Flashing Images -5.1 Reflash U-boot Image using U-boot +5.1 Reflash U-Boot Image using U-Boot NOR flash: diff --git a/board/freescale/mpc8323erdb/README b/board/freescale/mpc8323erdb/README index 6f89829..9a46da0 100644 --- a/board/freescale/mpc8323erdb/README +++ b/board/freescale/mpc8323erdb/README @@ -22,10 +22,10 @@ Freescale MPC8323ERDB Board 3. Downloading and Flashing Images -3.1 Reflash U-boot Image using U-boot +3.1 Reflash U-Boot Image using U-Boot N.b, have an alternate means of programming - the flash available if the new u-boot doesn't boot. + the flash available if the new U-Boot doesn't boot. First try a: @@ -44,7 +44,7 @@ Freescale MPC8323ERDB Board erase fe000000 +$filesize cp.b $loadaddr fe000000 $filesize - To keep your old u-boot's environment variables, do a: + To keep your old U-Boot's environment variables, do a: saveenv diff --git a/board/freescale/mpc832xemds/README b/board/freescale/mpc832xemds/README index 4142aa9..d141cd3 100644 --- a/board/freescale/mpc832xemds/README +++ b/board/freescale/mpc832xemds/README @@ -97,7 +97,7 @@ Freescale MPC832XEMDS Board make MPC832XEMDS_config make - MPC832x support PCI 33MHz and PCI 66MHz, to make u-boot support PCI: + MPC832x support PCI 33MHz and PCI 66MHz, to make U-Boot support PCI: 1)Make sure the DIP SW support PCI mode as described in Section 1.1. @@ -113,7 +113,7 @@ Freescale MPC832XEMDS Board tftp 10000 u-boot.bin -5.1 Reflash U-boot Image using U-boot +5.1 Reflash U-Boot Image using U-Boot tftp 20000 u-boot.bin protect off fe000000 fe0fffff diff --git a/board/freescale/mpc837xemds/README b/board/freescale/mpc837xemds/README index faf21c9..dbb1517 100644 --- a/board/freescale/mpc837xemds/README +++ b/board/freescale/mpc837xemds/README @@ -90,7 +90,7 @@ Freescale MPC837xEMDS Board tftp 40000 u-boot.bin -5.1 Reflash U-boot Image using U-boot +5.1 Reflash U-Boot Image using U-Boot tftp 40000 u-boot.bin protect off fe000000 fe1fffff diff --git a/board/freescale/mpc837xerdb/README b/board/freescale/mpc837xerdb/README index cfb6efa..12df2f2 100644 --- a/board/freescale/mpc837xerdb/README +++ b/board/freescale/mpc837xerdb/README @@ -84,7 +84,7 @@ Freescale MPC837xE-RDB Board tftp $loadaddr u-boot.bin -5.1 Reflash U-boot Image using U-boot +5.1 Reflash U-Boot Image using U-Boot tftp $loadaddr u-boot.bin protect off fe000000 fe0fffff diff --git a/board/freescale/mpc8569mds/README b/board/freescale/mpc8569mds/README index 3d12a96..86c3ccd 100644 --- a/board/freescale/mpc8569mds/README +++ b/board/freescale/mpc8569mds/README @@ -3,7 +3,7 @@ Overview MPC8569MDS is composed of two boards - PB (Processor Board) and PIB (Platform I/O Board). The mpc8569 PowerTM processor is mounted on PB board. -Building U-boot +Building U-Boot ----------- make MPC8569MDS_config make @@ -22,10 +22,10 @@ Memory Map 0xfe00_0000 0xffff_ffff Flash 32MB -Flashing u-boot Images +Flashing U-Boot Images --------------- -Use the following commands to program u-boot image into flash: +Use the following commands to program U-Boot image into flash: => tftp 1000000 u-boot.bin => protect off all diff --git a/board/freescale/mpc8572ds/README b/board/freescale/mpc8572ds/README index 57fd2ad..f1ffdd1 100644 --- a/board/freescale/mpc8572ds/README +++ b/board/freescale/mpc8572ds/README @@ -3,7 +3,7 @@ Overview MPC8572DS is a high-performance computing, evaluation and development platform supporting the mpc8572 PowerTM processor. -Building U-boot +Building U-Boot ----------- make MPC8572DS_config make @@ -22,14 +22,14 @@ Memory Map 0xe800_0000 - 0xebff_ffff Alternate bank 64MB 0xec00_0000 - 0xefff_ffff Boot bank 64MB -0xebf8_0000 - 0xebff_ffff Alternate u-boot address 512KB -0xeff8_0000 - 0xefff_ffff Boot u-boot address 512KB +0xebf8_0000 - 0xebff_ffff Alternate U-Boot address 512KB +0xeff8_0000 - 0xefff_ffff Boot U-Boot address 512KB Flashing Images --------------- -To place a new u-boot image in the alternate flash bank and then reset with that +To place a new U-Boot image in the alternate flash bank and then reset with that new image temporarily, use this: tftp 1000000 u-boot.bin @@ -135,7 +135,7 @@ Implementing AMP(Asymmetric MultiProcessing) 5. Bring up two cores separately: - a. Power on the board, under u-boot prompt: + a. Power on the board, under U-Boot prompt: => setenv <serverip> => setenv <ipaddr> => setenv bootargs root=/dev/ram rw console=ttyS0,115200 @@ -154,7 +154,7 @@ Implementing AMP(Asymmetric MultiProcessing) => fdt chosen $initrd_start $initrd_end => bootm prep => cpu 1 release $bootm_low - $fdtaddr - - c. Bring up core0's kernel(on the same u-boot console): + c. Bring up core0's kernel(on the same U-Boot console): => setenv bootm_low 0 => setenv bootm_size 0x20000000 => tftp 1000000 8572/uImage.core0 @@ -162,5 +162,5 @@ Implementing AMP(Asymmetric MultiProcessing) => tftp c00000 8572/mpc8572ds_core0.dtb => bootm 1000000 2000000 c00000 -Please note only core0 will run u-boot, core1 starts kernel directly after +Please note only core0 will run U-Boot, core1 starts kernel directly after "cpu release" command is issued. diff --git a/board/freescale/mpc8610hpcd/README b/board/freescale/mpc8610hpcd/README index 31a9af3..066e625 100644 --- a/board/freescale/mpc8610hpcd/README +++ b/board/freescale/mpc8610hpcd/README @@ -27,7 +27,7 @@ To Flash U-Boot into the booting bank: cp.b 1000000 fff00000 $filesize -To Flash U-boot into the alternate bank +To Flash U-Boot into the alternate bank tftp 1000000 u-boot.bin erase fbf00000 +$filesize diff --git a/board/freescale/mpc8641hpcn/README b/board/freescale/mpc8641hpcn/README index d8fe0a4..77909a8 100644 --- a/board/freescale/mpc8641hpcn/README +++ b/board/freescale/mpc8641hpcn/README @@ -80,7 +80,7 @@ Switches: 3. Flash U-Boot --------------- The flash range 0xEF800000 to 0xEFFFFFFF can be divided into 2 halves. -It is possible to use either half to boot using u-boot. Switch 5 bit 2 +It is possible to use either half to boot using U-Boot. Switch 5 bit 2 is used for this purpose. 0xEF800000 to 0xEFBFFFFF - 4MB @@ -102,7 +102,7 @@ To Flash U-Boot into the booting bank (0xEFC00000 - 0xEFFFFFFF): or use tftpflash command: run tftpflash -To Flash U-boot into the alternative bank (0xEF800000 - 0xEFBFFFFF): +To Flash U-Boot into the alternative bank (0xEF800000 - 0xEFBFFFFF): tftp 1000000 u-boot.bin erase efb00000 +$filesize @@ -113,7 +113,7 @@ To Flash U-boot into the alternative bank (0xEF800000 - 0xEFBFFFFF): ------------- NOTE: RIO and PCI are mutually exclusive, so they share an address -For 32-bit u-boot, devices are mapped so that the virtual address == +For 32-bit U-Boot, devices are mapped so that the virtual address == the physical address, and the map looks liks this: Memory Range Device Size @@ -130,7 +130,7 @@ the physical address, and the map looks liks this: 0xffc1_0000 0xffc1_ffff PCI2/PEX2 IO 64K 0xef80_0000 0xefff_ffff Flash 8M -For 36-bit-enabled u-boot, the virtual map is the same as for 32-bit. +For 36-bit-enabled U-Boot, the virtual map is the same as for 32-bit. However, the physical map is altered to reside in 36-bit space, as follows. Addresses are no longer mapped with VA == PA. All accesses from software use the VA; the PA is only used for setting up windows diff --git a/board/freescale/mx28evk/README b/board/freescale/mx28evk/README index f9d6324..a248fb2 100644 --- a/board/freescale/mx28evk/README +++ b/board/freescale/mx28evk/README @@ -1,7 +1,7 @@ FREESCALE MX28EVK ================== -Supported hardware: MX28EVK rev C and D are supported in U-boot. +Supported hardware: MX28EVK rev C and D are supported in U-Boot. Files of the MX28EVK port -------------------------- diff --git a/board/freescale/mx35pdk/README b/board/freescale/mx35pdk/README index 7232b53..6f6841f 100644 --- a/board/freescale/mx35pdk/README +++ b/board/freescale/mx35pdk/README @@ -71,7 +71,7 @@ exec -c "noinitrd console=ttymxc0,115200 root=/dev/nfsroot rootfstype=nfsroot nf Flashing U-Boot -------------------------------- -U-boot should be stored on the NOR flash. +U-Boot should be stored on the NOR flash. The boot storage can be select using the switches on the personality board (SW1-SW2) and on the DEBUG board (SW4-SW10). @@ -96,7 +96,7 @@ Creating 6 MTD partitions on "mxc_nor_flash.0": To erase the whole partition: $ flash_eraseall /dev/mtd0 -Writing u-boot: +Writing U-Boot: dd if=u-boot.bin of=/dev/mtd0 To boot from NOR, you have to select the switches as follows: diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c index 46b4f3f..e9d9664 100644 --- a/board/freescale/mx6sabresd/mx6sabresd.c +++ b/board/freescale/mx6sabresd/mx6sabresd.c @@ -268,7 +268,7 @@ int board_mmc_init(bd_t *bis) /* * According to the board_mmc_init() the following map is done: - * (U-boot device node) (Physical Port) + * (U-Boot device node) (Physical Port) * mmc0 SD2 * mmc1 SD3 * mmc2 eMMC diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c index df205ea..4f816c4 100644 --- a/board/freescale/mx6slevk/mx6slevk.c +++ b/board/freescale/mx6slevk/mx6slevk.c @@ -202,7 +202,7 @@ int board_mmc_init(bd_t *bis) /* * According to the board_mmc_init() the following map is done: - * (U-boot device node) (Physical Port) + * (U-Boot device node) (Physical Port) * mmc0 USDHC1 * mmc1 USDHC2 * mmc2 USDHC3 diff --git a/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c b/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c index c9631d2..a240982 100644 --- a/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c +++ b/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c @@ -339,7 +339,7 @@ int board_mmc_init(bd_t *bis) /* * According to the board_mmc_init() the following map is done: - * (U-boot device node) (Physical Port) + * (U-Boot device node) (Physical Port) * mmc0 USDHC3 * mmc1 USDHC4 */ diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c index 97e9ed7..41319c6 100644 --- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c +++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c @@ -348,7 +348,7 @@ int board_mmc_init(bd_t *bis) /* * According to the board_mmc_init() the following map is done: - * (U-boot device node) (Physical Port) + * (U-Boot device node) (Physical Port) * mmc0 USDHC2 * mmc1 USDHC3 * mmc2 USDHC4 diff --git a/board/freescale/mx6ul_14x14_evk/README b/board/freescale/mx6ul_14x14_evk/README index d48c7ba..1edccf6 100644 --- a/board/freescale/mx6ul_14x14_evk/README +++ b/board/freescale/mx6ul_14x14_evk/README @@ -1,7 +1,7 @@ -How to use U-boot on Freescale MX6UL 14x14 EVK +How to use U-Boot on Freescale MX6UL 14x14 EVK ----------------------------------------------- -- Build U-boot for MX6UL 14x14 EVK: +- Build U-Boot for MX6UL 14x14 EVK: $ make mrproper $ make mx6ul_14x14_evk_defconfig @@ -28,5 +28,5 @@ switch label numbers reference). - Connect the USB cable between the EVK and the PC for the console. (The USB console connector is the one close the push buttons) -- Insert the micro SD card in the board, power it up and U-boot messages should +- Insert the micro SD card in the board, power it up and U-Boot messages should come up. diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c index b9b3573..98d5675 100644 --- a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c +++ b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c @@ -394,7 +394,7 @@ int board_mmc_init(bd_t *bis) /* * According to the board_mmc_init() the following map is done: - * (U-boot device node) (Physical Port) + * (U-Boot device node) (Physical Port) * mmc0 USDHC1 * mmc1 USDHC2 */ diff --git a/board/freescale/mx7dsabresd/mx7dsabresd.c b/board/freescale/mx7dsabresd/mx7dsabresd.c index 20e56f2..fee24e2 100644 --- a/board/freescale/mx7dsabresd/mx7dsabresd.c +++ b/board/freescale/mx7dsabresd/mx7dsabresd.c @@ -366,7 +366,7 @@ int board_mmc_init(bd_t *bis) int i, ret; /* * According to the board_mmc_init() the following map is done: - * (U-boot device node) (Physical Port) + * (U-Boot device node) (Physical Port) * mmc0 USDHC1 * mmc2 USDHC3 (eMMC) */ diff --git a/board/freescale/p1010rdb/README.P1010RDB-PA b/board/freescale/p1010rdb/README.P1010RDB-PA index cde246d..105942f 100644 --- a/board/freescale/p1010rdb/README.P1010RDB-PA +++ b/board/freescale/p1010rdb/README.P1010RDB-PA @@ -95,7 +95,7 @@ is set to spi-flash instead of to SLIC/TDM/DAC and tdm_can_sel is set to TDM instead of to CAN/UART1. -Build and burn u-boot to NOR flash +Build and burn U-Boot to NOR flash ================================== 1. Build u-boot.bin image export ARCH=powerpc @@ -131,7 +131,7 @@ CPLD NOR bank selection register address 0xFFB00009 Bit[0]: 1 - boot from lower 4 sectors -Build and burn u-boot to NAND flash +Build and burn U-Boot to NAND flash =================================== 1. Build u-boot.bin image export ARCH=powerpc @@ -146,7 +146,7 @@ Build and burn u-boot to NAND flash 3. Check SW4[1:4]= 1000 and SW6[4]=1, then power on. -Build and burn u-boot to SPI flash +Build and burn U-Boot to SPI flash ================================== 1. Build u-boot-spi.bin image make P1010RDB_SPIFLASH_config; make diff --git a/board/freescale/p1010rdb/README.P1010RDB-PB b/board/freescale/p1010rdb/README.P1010RDB-PB index c5d1419..dc82f0d 100644 --- a/board/freescale/p1010rdb/README.P1010RDB-PB +++ b/board/freescale/p1010rdb/README.P1010RDB-PB @@ -112,14 +112,14 @@ To enable FlexCAN: To enable SDHC in case of NOR/NAND/SPI boot a) For temporary use case in runtime without reboot system - run 'mux sdhc' in u-boot to validate SDHC with invalidating IFC. + run 'mux sdhc' in U-Boot to validate SDHC with invalidating IFC. b) For long-term use case set 'esdhc' in hwconfig and save it. To enable IFC in case of SD boot a) For temporary use case in runtime without reboot system - run 'mux ifc' in u-boot to validate IFC with invalidating SDHC. + run 'mux ifc' in U-Boot to validate IFC with invalidating SDHC. b) For long-term use case set 'ifc' in hwconfig and save it. diff --git a/board/freescale/t102xqds/README b/board/freescale/t102xqds/README index bb0f280..c00e3ba 100644 --- a/board/freescale/t102xqds/README +++ b/board/freescale/t102xqds/README @@ -172,16 +172,16 @@ Start Address End Address Description Size 128MB NOR Flash memory Map -------------------------- Start Address End Address Definition Max size -0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB -0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB +0xEFF40000 0xEFFFFFFF U-Boot (current bank) 768KB +0xEFF20000 0xEFF3FFFF U-Boot env (current bank) 128KB 0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB 0xEFE00000 0xEFE3FFFF QE firmware (current bank) 256KB 0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB 0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB 0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB 0xEC000000 0xEC01FFFF RCW (alt bank) 128KB -0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB -0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB +0xEBF40000 0xEBFFFFFF U-Boot (alt bank) 768KB +0xEBF20000 0xEBF3FFFF U-Boot env (alt bank) 128KB 0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB 0xEBE00000 0xEBE3FFFF QE firmware (alt bank) 256KB 0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB @@ -221,11 +221,11 @@ Software configurations and board settings Switching between default bank0 and alternate bank4 on NOR flash To change boot source to vbank4: - via software: run command 'qixis_reset altbank' in u-boot. + via software: run command 'qixis_reset altbank' in U-Boot. via DIP-switch: set SW6[1:4] = '0100' To change boot source to vbank0: - via software: run command 'qixis_reset' in u-boot. + via software: run command 'qixis_reset' in U-Boot. via DIP-Switch: set SW6[1:4] = '0000' 2. NAND Boot: @@ -273,8 +273,8 @@ e) For SDXC: set adaptor=sdxc in hwconfig ------------------------------- PBL initializes the internal CPC-SRAM and copy SPL(160K) to SRAM. SPL further initializes DDR using SPD and environment variables -and copy u-boot(768 KB) from NAND/SPI/SD device to DDR. -Finally SPL transers control to u-boot for futher booting. +and copy U-Boot(768 KB) from NAND/SPI/SD device to DDR. +Finally SPL transers control to U-Boot for futher booting. SPL has following features: - Executes within 256K @@ -294,14 +294,14 @@ Run time view of SPL framework ------------------------------------------------- |STACK | 0xFFFD8000 (22KB) | ------------------------------------------------- -|U-boot SPL | 0xFFFD8000 (160KB) | +|U-Boot SPL | 0xFFFD8000 (160KB) | ------------------------------------------------- NAND Flash memory Map on T1024QDS ------------------------------------------------------------- Start End Definition Size -0x000000 0x0FFFFF u-boot 1MB -0x100000 0x15FFFF u-boot env 8KB +0x000000 0x0FFFFF U-Boot 1MB +0x100000 0x15FFFF U-Boot env 8KB 0x160000 0x17FFFF FMAN Ucode 128KB 0x180000 0x19FFFF QE Firmware 128KB @@ -309,8 +309,8 @@ Start End Definition Size SD Card memory Map on T1024QDS ---------------------------------------------------- Block #blocks Definition Size -0x008 2048 u-boot img 1MB -0x800 0016 u-boot env 8KB +0x008 2048 U-Boot img 1MB +0x800 0016 U-Boot env 8KB 0x820 0256 FMAN Ucode 128KB 0x920 0256 QE Firmware 128KB @@ -318,8 +318,8 @@ Block #blocks Definition Size SPI Flash memory Map on T1024QDS ---------------------------------------------------- Start End Definition Size -0x000000 0x0FFFFF u-boot img 1MB -0x100000 0x101FFF u-boot env 8KB +0x000000 0x0FFFFF U-Boot img 1MB +0x100000 0x101FFF U-Boot env 8KB 0x110000 0x12FFFF FMAN Ucode 128KB 0x130000 0x14FFFF QE Firmware 128KB diff --git a/board/freescale/t102xqds/eth_t102xqds.c b/board/freescale/t102xqds/eth_t102xqds.c index ca54e2a..19543c0 100644 --- a/board/freescale/t102xqds/eth_t102xqds.c +++ b/board/freescale/t102xqds/eth_t102xqds.c @@ -310,7 +310,7 @@ int board_eth_init(bd_t *bis) case 0x95: case 0x99: /* - * XFI does not need a PHY to work, but to avoid U-boot use + * XFI does not need a PHY to work, but to avoid U-Boot use * default PHY address which is zero to a MAC when it found * a MAC has no PHY address, we give a PHY address to XFI * MAC, and should not use a real XAUI PHY address, since diff --git a/board/freescale/t102xrdb/README b/board/freescale/t102xrdb/README index 7d3794a..a0af25a 100644 --- a/board/freescale/t102xrdb/README +++ b/board/freescale/t102xrdb/README @@ -145,8 +145,8 @@ Start Address End Address Description Size 128MB NOR Flash Memory Layout ----------------------------- Start Address End Address Definition Max size -0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB -0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB +0xEFF40000 0xEFFFFFFF U-Boot (current bank) 768KB +0xEFF20000 0xEFF3FFFF U-Boot env (current bank) 128KB 0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB 0xEFE00000 0xEFE3FFFF QE firmware (current bank) 256KB 0xED300000 0xEFDFFFFF rootfs (alt bank) 44MB @@ -158,8 +158,8 @@ Start Address End Address Definition Max size 0xEC700000 0xEC7FFFFF HV.uImage (alternate bank) 1MB 0xEC020000 0xEC6FFFFF Linux.uImage (alt bank) ~7MB 0xEC000000 0xEC01FFFF RCW (alt bank) 128KB -0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB -0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB +0xEBF40000 0xEBFFFFFF U-Boot (alt bank) 768KB +0xEBF20000 0xEBF3FFFF U-Boot env (alt bank) 128KB 0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB 0xEBE00000 0xEBE3FFFF QE firmware (alt bank) 256KB 0xE9300000 0xEBDFFFFF rootfs (current bank) 44MB @@ -198,18 +198,18 @@ Software configurations and board settings Switching between default bank0 and alternate bank4 on NOR flash To change boot source to vbank4: on T1024RDB: - via software: run command 'cpld reset altbank' in u-boot. + via software: run command 'cpld reset altbank' in U-Boot. via DIP-switch: set SW3[5:7] = '100' on T1023RDB: - via software: run command 'switch bank4' in u-boot. + via software: run command 'switch bank4' in U-Boot. via DIP-switch: set SW3[5:7] = '100' To change boot source to vbank0: on T1024RDB: - via software: run command 'cpld reset' in u-boot. + via software: run command 'cpld reset' in U-Boot. via DIP-Switch: set SW3[5:7] = '000' on T1023RDB: - via software: run command 'switch bank0' in u-boot. + via software: run command 'switch bank0' in U-Boot. via DIP-switch: set SW3[5:7] = '000' 2. NAND Boot: @@ -255,8 +255,8 @@ Software configurations and board settings ------------------------------- PBL initializes the internal CPC-SRAM and copy SPL(160K) to SRAM. SPL further initializes DDR using SPD and environment variables -and copy u-boot(768 KB) from NAND/SPI/SD device to DDR. -Finally SPL transers control to u-boot for futher booting. +and copy U-Boot(768 KB) from NAND/SPI/SD device to DDR. +Finally SPL transers control to U-Boot for futher booting. SPL has following features: - Executes within 256K @@ -276,14 +276,14 @@ Run time view of SPL framework ------------------------------------------------- |STACK | 0xFFFD8000 (22KB) | ------------------------------------------------- -|U-boot SPL | 0xFFFD8000 (160KB) | +|U-Boot SPL | 0xFFFD8000 (160KB) | ------------------------------------------------- NAND Flash memory Map on T1024RDB ------------------------------------------------------------- Start End Definition Size -0x000000 0x0FFFFF u-boot 1MB(2 block) -0x100000 0x17FFFF u-boot env 512KB(1 block) +0x000000 0x0FFFFF U-Boot 1MB(2 block) +0x100000 0x17FFFF U-Boot env 512KB(1 block) 0x180000 0x1FFFFF FMAN Ucode 512KB(1 block) 0x200000 0x27FFFF QE Firmware 512KB(1 block) @@ -291,16 +291,16 @@ Start End Definition Size NAND Flash memory Map on T1023RDB ---------------------------------------------------- Start End Definition Size -0x000000 0x0FFFFF u-boot 1MB -0x100000 0x15FFFF u-boot env 8KB +0x000000 0x0FFFFF U-Boot 1MB +0x100000 0x15FFFF U-Boot env 8KB 0x160000 0x17FFFF FMAN Ucode 128KB SD Card memory Map on T102xRDB ---------------------------------------------------- Block #blocks Definition Size -0x008 2048 u-boot img 1MB -0x800 0016 u-boot env 8KB +0x008 2048 U-Boot img 1MB +0x800 0016 U-Boot env 8KB 0x820 0256 FMAN Ucode 128KB 0x920 0256 QE Firmware 128KB(only T1024RDB) @@ -308,8 +308,8 @@ Block #blocks Definition Size 64MB SPI Flash memory Map on T102xRDB ---------------------------------------------------- Start End Definition Size -0x000000 0x0FFFFF u-boot img 1MB -0x100000 0x101FFF u-boot env 8KB +0x000000 0x0FFFFF U-Boot img 1MB +0x100000 0x101FFF U-Boot env 8KB 0x110000 0x12FFFF FMAN Ucode 128KB 0x130000 0x14FFFF QE Firmware 128KB(only T1024RDB) 0x300000 0x3FFFFF device tree 128KB diff --git a/board/freescale/t1040qds/README b/board/freescale/t1040qds/README index 8160ca0..6c5ffc0 100644 --- a/board/freescale/t1040qds/README +++ b/board/freescale/t1040qds/README @@ -118,15 +118,15 @@ Start Address End Address Description Size NOR Flash memory Map on T1040QDS -------------------------------- Start End Definition Size -0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB -0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB +0xEFF40000 0xEFFFFFFF U-Boot (current bank) 768KB +0xEFF20000 0xEFF3FFFF U-Boot env (current bank) 128KB 0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB 0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB 0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB 0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB 0xEC000000 0xEC01FFFF RCW (alt bank) 128KB -0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB -0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB +0xEBF40000 0xEBFFFFFF U-Boot (alt bank) 768KB +0xEBF20000 0xEBF3FFFF U-Boot env (alt bank) 128KB 0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB 0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB 0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 11MB + 512KB @@ -138,7 +138,7 @@ Various Software configurations/environment variables/commands -------------------------------------------------------------- The below commands apply to T1040QDS -1. U-boot environment variable hwconfig +1. U-Boot environment variable hwconfig The default hwconfig is: hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;usb1: dr_mode=host,phy_type=utmi diff --git a/board/freescale/t104xrdb/README b/board/freescale/t104xrdb/README index b9d2212..98b3f63 100644 --- a/board/freescale/t104xrdb/README +++ b/board/freescale/t104xrdb/README @@ -186,15 +186,15 @@ Start Address End Address Description Size NOR Flash memory Map --------------------- Start End Definition Size -0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB -0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB +0xEFF40000 0xEFFFFFFF U-Boot (current bank) 768KB +0xEFF20000 0xEFF3FFFF U-Boot env (current bank) 128KB 0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB 0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB 0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB 0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB 0xEC000000 0xEC01FFFF RCW (alt bank) 128KB -0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB -0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB +0xEBF40000 0xEBFFFFFF U-Boot (alt bank) 768KB +0xEBF20000 0xEBF3FFFF U-Boot env (alt bank) 128KB 0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB 0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB 0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 11MB + 512KB @@ -206,7 +206,7 @@ Various Software configurations/environment variables/commands -------------------------------------------------------------- The below commands apply to the board -1. U-boot environment variable hwconfig +1. U-Boot environment variable hwconfig The default hwconfig is: hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;usb1: dr_mode=host,phy_type=utmi @@ -228,8 +228,8 @@ NAND boot with 2 Stage boot loader ---------------------------------- PBL initialise the internal SRAM and copy SPL(160KB) in SRAM. SPL further initialise DDR using SPD and environment variables and copy -u-boot(768 KB) from flash to DDR. -Finally SPL transer control to u-boot for futher booting. +U-Boot(768 KB) from flash to DDR. +Finally SPL transer control to U-Boot for futher booting. SPL has following features: - Executes within 256K @@ -250,30 +250,30 @@ SPL has following features: ----------------------------------------------- STACK | 0xFFFD8000 (22KB) | ----------------------------------------------- - U-boot SPL | 0xFFFD8000 (160KB) | + U-Boot SPL | 0xFFFD8000 (160KB) | ----------------------------------------------- NAND Flash memory Map on T104xRDB ------------------------------------------ Start End Definition Size -0x000000 0x0FFFFF u-boot 1MB -0x180000 0x19FFFF u-boot env 128KB +0x000000 0x0FFFFF U-Boot 1MB +0x180000 0x19FFFF U-Boot env 128KB 0x280000 0x29FFFF FMAN Ucode 128KB 0x380000 0x39FFFF QE Firmware 128KB SD Card memory Map on T104xRDB ------------------------------------------ Block #blocks Definition Size -0x008 2048 u-boot 1MB -0x800 0024 u-boot env 8KB +0x008 2048 U-Boot 1MB +0x800 0024 U-Boot env 8KB 0x820 0256 FMAN Ucode 128KB 0x920 0256 QE Firmware 128KB SPI Flash memory Map on T104xRDB ------------------------------------------ Start End Definition Size -0x000000 0x0FFFFF u-boot 1MB -0x100000 0x101FFF u-boot env 8KB +0x000000 0x0FFFFF U-Boot 1MB +0x100000 0x101FFF U-Boot env 8KB 0x110000 0x12FFFF FMAN Ucode 128KB 0x130000 0x14FFFF QE Firmware 128KB diff --git a/board/freescale/t208xqds/README b/board/freescale/t208xqds/README index 83060c1..2a2a0e5 100755 --- a/board/freescale/t208xqds/README +++ b/board/freescale/t208xqds/README @@ -92,7 +92,7 @@ XFI: 10GBASE-KR scenario. So, for XFI usage, there are two scenarios, one will use fiber cable, another will use copper cable. An hwconfig env "fsl_10gkr_copper" is - introduced to indicate a XFI port will use copper cable, and U-boot + introduced to indicate a XFI port will use copper cable, and U-Boot will fixup the dtb accordingly. It's used as: fsl_10gkr_copper:<10g_mac_name> The <10g_mac_name> can be fm1_10g1, fm1_10g2, fm1_10g3, fm1_10g4, they @@ -108,7 +108,7 @@ XFI: - T2080QDS can support 1G-KX by using SGMII protocol, but serdes lane runs in 1G-KX mode. By default, the lane runs in SGMII mode, to set a lane in 1G-KX mode, need to set corresponding bit in SerDes Protocol Configuration - Register 1 (PCCR1), and U-boot fixup the dtb for kernel to do proper + Register 1 (PCCR1), and U-Boot fixup the dtb for kernel to do proper initialization. Hwconfig "fsl_1gkx" is used to indicate a lane runs in 1G-KX mode, MAC 1/2/5/6/9/10 are available for 1G-KX, MAC 3/4 run in RGMII mode. To set a @@ -142,15 +142,15 @@ Start Address End Address Description Size 128M NOR Flash memory Map ------------------------- Start Address End Address Definition Max size -0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB -0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB +0xEFF40000 0xEFFFFFFF U-Boot (current bank) 768KB +0xEFF20000 0xEFF3FFFF U-Boot env (current bank) 128KB 0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB 0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB 0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB 0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB 0xEC000000 0xEC01FFFF RCW (alt bank) 128KB -0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB -0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB +0xEBF40000 0xEBFFFFFF U-Boot (alt bank) 768KB +0xEBF20000 0xEBF3FFFF U-Boot env (alt bank) 128KB 0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB 0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB 0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 1MB @@ -172,11 +172,11 @@ Software configurations and board settings Switching between default bank0 and alternate bank4 on NOR flash To change boot source to vbank4: - by software: run command 'qixis_reset altbank' in u-boot. + by software: run command 'qixis_reset altbank' in U-Boot. by DIP-switch: set SW6[1:4] = '0100' To change boot source to vbank0: - by software: run command 'qixis_reset' in u-boot. + by software: run command 'qixis_reset' in U-Boot. by DIP-Switch: set SW6[1:4] = '0000' 2. NAND Boot: @@ -216,8 +216,8 @@ Software configurations and board settings ------------------------------- PBL initializes the internal CPC-SRAM and copy SPL(160K) to SRAM. SPL further initializes DDR using SPD and environment variables -and copy u-boot(768 KB) from NAND/SPI/SD device to DDR. -Finally SPL transers control to u-boot for futher booting. +and copy U-Boot(768 KB) from NAND/SPI/SD device to DDR. +Finally SPL transers control to U-Boot for futher booting. SPL has following features: - Executes within 256K @@ -237,30 +237,30 @@ Run time view of SPL framework ------------------------------------------------- |STACK | 0xFFFD8000 (22KB) | ------------------------------------------------- -|U-boot SPL | 0xFFFD8000 (160KB) | +|U-Boot SPL | 0xFFFD8000 (160KB) | ------------------------------------------------- NAND Flash memory Map on T2080QDS -------------------------------------------------------------- Start End Definition Size -0x000000 0x0FFFFF u-boot img 1MB (2 blocks) -0x100000 0x17FFFF u-boot env 512KB (1 block) +0x000000 0x0FFFFF U-Boot img 1MB (2 blocks) +0x100000 0x17FFFF U-Boot env 512KB (1 block) 0x180000 0x1FFFFF FMAN ucode 512KB (1 block) Micro SD Card memory Map on T2080QDS ---------------------------------------------------- Block #blocks Definition Size -0x008 2048 u-boot img 1MB -0x800 0016 u-boot env 8KB +0x008 2048 U-Boot img 1MB +0x800 0016 U-Boot env 8KB 0x820 0128 FMAN ucode 64KB SPI Flash memory Map on T2080QDS ---------------------------------------------------- Start End Definition Size -0x000000 0x0FFFFF u-boot img 1MB -0x100000 0x101FFF u-boot env 8KB +0x000000 0x0FFFFF U-Boot img 1MB +0x100000 0x101FFF U-Boot env 8KB 0x110000 0x11FFFF FMAN ucode 64KB diff --git a/board/freescale/t208xqds/eth_t208xqds.c b/board/freescale/t208xqds/eth_t208xqds.c index f08cff2..e92b5d3 100644 --- a/board/freescale/t208xqds/eth_t208xqds.c +++ b/board/freescale/t208xqds/eth_t208xqds.c @@ -600,7 +600,7 @@ int board_eth_init(bd_t *bis) case 0x66: case 0x67: /* - * XFI does not need a PHY to work, but to avoid U-boot use + * XFI does not need a PHY to work, but to avoid U-Boot use * default PHY address which is zero to a MAC when it found * a MAC has no PHY address, we give a PHY address to XFI * MAC, and should not use a real XAUI PHY address, since diff --git a/board/freescale/t208xrdb/README b/board/freescale/t208xrdb/README index 24484cd..42b2b92 100644 --- a/board/freescale/t208xrdb/README +++ b/board/freescale/t208xrdb/README @@ -107,16 +107,16 @@ Start Address End Address Description Size 128M NOR Flash memory Map ------------------------- Start Address End Address Definition Max size -0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB -0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB +0xEFF40000 0xEFFFFFFF U-Boot (current bank) 768KB +0xEFF20000 0xEFF3FFFF U-Boot env (current bank) 128KB 0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB 0xEFE00000 0xEFE3FFFF PHY CS4315 firmware 256KB 0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB 0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB 0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB 0xEC000000 0xEC01FFFF RCW (alt bank) 128KB -0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB -0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB +0xEBF40000 0xEBFFFFFF U-Boot (alt bank) 768KB +0xEBF20000 0xEBF3FFFF U-Boot env (alt bank) 128KB 0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB 0xEBE00000 0xEBE3FFFF PHY CS4315 firmware (alt bank) 256KB 0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB @@ -155,11 +155,11 @@ Software configurations and board settings Switching between default bank and alternate bank on NOR flash To change boot source to vbank4: - via software: run command 'cpld reset altbank' in u-boot. + via software: run command 'cpld reset altbank' in U-Boot. via DIP-switch: set SW3[5:7] = '100' To change boot source to vbank0: - via software: run command 'cpld reset' in u-boot. + via software: run command 'cpld reset' in U-Boot. via DIP-Switch: set SW3[5:7] = '000' 2. NAND Boot: @@ -197,8 +197,8 @@ Software configurations and board settings ------------------------------- PBL initializes the internal CPC-SRAM and copy SPL(160K) to SRAM. SPL further initializes DDR using SPD and environment variables -and copy u-boot(768 KB) from NAND/SPI/SD device to DDR. -Finally SPL transers control to u-boot for futher booting. +and copy U-Boot(768 KB) from NAND/SPI/SD device to DDR. +Finally SPL transers control to U-Boot for futher booting. SPL has following features: - Executes within 256K @@ -218,14 +218,14 @@ Run time view of SPL framework ------------------------------------------------- |STACK | 0xFFFD8000 (22KB) | ------------------------------------------------- -|U-boot SPL | 0xFFFD8000 (160KB) | +|U-Boot SPL | 0xFFFD8000 (160KB) | ------------------------------------------------- NAND Flash memory Map on T2080RDB -------------------------------------------------------------- Start End Definition Size -0x000000 0x0FFFFF u-boot img 1MB (2 blocks) -0x100000 0x17FFFF u-boot env 512KB (1 block) +0x000000 0x0FFFFF U-Boot img 1MB (2 blocks) +0x100000 0x17FFFF U-Boot env 512KB (1 block) 0x180000 0x1FFFFF FMAN ucode 512KB (1 block) 0x200000 0x27FFFF CS4315 ucode 512KB (1 block) @@ -233,8 +233,8 @@ Start End Definition Size Micro SD Card memory Map on T2080RDB ---------------------------------------------------- Block #blocks Definition Size -0x008 2048 u-boot img 1MB -0x800 0016 u-boot env 8KB +0x008 2048 U-Boot img 1MB +0x800 0016 U-Boot env 8KB 0x820 0128 FMAN ucode 64KB 0x8a0 0512 CS4315 ucode 256KB @@ -242,8 +242,8 @@ Block #blocks Definition Size SPI Flash memory Map on T2080RDB ---------------------------------------------------- Start End Definition Size -0x000000 0x0FFFFF u-boot img 1MB -0x100000 0x101FFF u-boot env 8KB +0x000000 0x0FFFFF U-Boot img 1MB +0x100000 0x101FFF U-Boot env 8KB 0x110000 0x11FFFF FMAN ucode 64KB 0x120000 0x15FFFF CS4315 ucode 256KB diff --git a/board/freescale/t4qds/README b/board/freescale/t4qds/README index 3962fee..bf23814 100644 --- a/board/freescale/t4qds/README +++ b/board/freescale/t4qds/README @@ -86,7 +86,7 @@ Board Features 10GBASE-KR scenario. So, for XFI usage, there are two scenarios, one will use fiber cable, another will use copper cable. An hwconfig env "fsl_10gkr_copper" is - introduced to indicate a XFI port will use copper cable, and U-boot + introduced to indicate a XFI port will use copper cable, and U-Boot will fixup the dtb accordingly. It's used as: fsl_10gkr_copper:<10g_mac_name> The <10g_mac_name> can be fm1_10g1, fm1_10g2, fm2_10g1, fm2_10g2, they @@ -118,7 +118,7 @@ The physical address of the last (boot page translation) varies with the actual Voltage ID and VDD override -------------------- -T4240 has a VID feature. U-boot reads the VID efuses and adjust the voltage +T4240 has a VID feature. U-Boot reads the VID efuses and adjust the voltage accordingly. The voltage can also be override by command vdd_override. The syntax is @@ -144,8 +144,8 @@ Users can set the final voltage directly. ------------------------------- PBL initializes the internal SRAM and copy SPL(160K) in SRAM. SPL further initialise DDR using SPD and environment variables -and copy u-boot(768 KB) from NAND/SD device to DDR. -Finally SPL transers control to u-boot for futher booting. +and copy U-Boot(768 KB) from NAND/SD device to DDR. +Finally SPL transers control to U-Boot for futher booting. SPL has following features: - Executes within 256K @@ -165,21 +165,21 @@ Run time view of SPL framework ------------------------------------------------- |STACK | 0xFFFD8000 (22KB) | ------------------------------------------------- -|U-boot SPL | 0xFFFD8000 (160KB) | +|U-Boot SPL | 0xFFFD8000 (160KB) | ------------------------------------------------- NAND Flash memory Map on T4QDS -------------------------------------------------------------- Start End Definition Size -0x000000 0x0FFFFF u-boot img 1MB -0x140000 0x15FFFF u-boot env 128KB +0x000000 0x0FFFFF U-Boot img 1MB +0x140000 0x15FFFF U-Boot env 128KB 0x160000 0x17FFFF FMAN Ucode 128KB Micro SD Card memory Map on T4QDS ---------------------------------------------------- Block #blocks Definition Size -0x008 2048 u-boot img 1MB -0x800 0016 u-boot env 8KB +0x008 2048 U-Boot img 1MB +0x800 0016 U-Boot env 8KB 0x820 0128 FMAN ucode 64KB Switch Settings: (ON is 1, OFF is 0) diff --git a/board/freescale/t4qds/eth.c b/board/freescale/t4qds/eth.c index 83a3a9b..95f8c04 100644 --- a/board/freescale/t4qds/eth.c +++ b/board/freescale/t4qds/eth.c @@ -658,7 +658,7 @@ int board_eth_init(bd_t *bis) switch (fm_info_get_enet_if(i)) { case PHY_INTERFACE_MODE_XGMII: if ((srds_prtcl_s2 == 55) || (srds_prtcl_s2 == 57)) { - /* A fake PHY address to make U-boot happy */ + /* A fake PHY address to make U-Boot happy */ fm_info_set_phy_address(i, i); } else { lane = serdes_get_first_lane(FSL_SRDS_1, @@ -839,7 +839,7 @@ int board_eth_init(bd_t *bis) switch (fm_info_get_enet_if(i)) { case PHY_INTERFACE_MODE_XGMII: if ((srds_prtcl_s2 == 55) || (srds_prtcl_s2 == 57)) { - /* A fake PHY address to make U-boot happy */ + /* A fake PHY address to make U-Boot happy */ fm_info_set_phy_address(i, i); } else { lane = serdes_get_first_lane(FSL_SRDS_2, diff --git a/board/gateworks/gw_ventana/README b/board/gateworks/gw_ventana/README index 697e5c8..9418907 100644 --- a/board/gateworks/gw_ventana/README +++ b/board/gateworks/gw_ventana/README @@ -16,13 +16,13 @@ The i.MX6 has a BOOT ROM PPL (Primary Program Loader) which supports loading an executable image from various boot devices. The Gateworks Ventana board config uses an SPL build configuration. This -will build the following artifacts from u-boot source: +will build the following artifacts from U-Boot source: - SPL - Secondary Program Loader that the i.MX6 BOOT ROM (Primary Program Loader) boots. This detects CPU/DRAM configuration, configures The DRAM controller, loads u-boot.img from the detected boot device, and jumps to it. As this is booted from the PPL, it has an IVT/DCD table. - - u-boot.img - The main u-boot core which is u-boot.bin with a image header. + - u-boot.img - The main U-Boot core which is u-boot.bin with a image header. 2. Build @@ -71,15 +71,15 @@ kobs-ng init -v -x --search_exponent=1 SPL The kobs-ng application uses an imximage which contains the Image Vector Table (IVT) and Device Configuration Data (DCD) structures that the i.MX6 BOOT ROM requires to boot. The kobs-ng adds the Firmware Configuration Block (FCB) and -Discovered Bad Block Table (DBBT). The SPL build artifact from u-boot is +Discovered Bad Block Table (DBBT). The SPL build artifact from U-Boot is an imximage. -The u-boot.img, which is the non SPL u-boot binary appended to a u-boot image +The u-boot.img, which is the non SPL U-Boot binary appended to a U-Boot image header must be programmed in the NAND flash boot device at an offset hard coded in the SPL. For the Ventana boards, this has been chosen to be 14MB. -The image can be programmed from either u-boot or Linux: +The image can be programmed from either U-Boot or Linux: -u-boot: +U-Boot: Ventana > setenv mtdparts mtdparts=nand:14m(spl),2m(uboot),1m(env),-(rootfs) Ventana > tftp ${loadaddr} u-boot.img && nand erase.part uboot && \ nand write ${loadaddr} uboot ${filesize} @@ -104,7 +104,7 @@ More details about the i.MX6 BOOT ROM can be found in the IMX6 reference manual. When the IMX6 eFUSE settings have been factory programmed to boot from micro-SD the SPL will be loaded from offset 0x400 (1KB). Once the SPL is -booted, it will load and execute U-boot (u-boot.img) from offset 69KB +booted, it will load and execute U-Boot (u-boot.img) from offset 69KB on the micro-SD (defined by CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR). While it is technically possible to enable the SPL to be able to load diff --git a/board/ibf-dsp561/Makefile b/board/ibf-dsp561/Makefile index 5b05ba8..cbf1612 100644 --- a/board/ibf-dsp561/Makefile +++ b/board/ibf-dsp561/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2007 Analog Device Inc. # diff --git a/board/ibf-dsp561/ibf-dsp561.c b/board/ibf-dsp561/ibf-dsp561.c index d2ac7a5..8475fda 100644 --- a/board/ibf-dsp561/ibf-dsp561.c +++ b/board/ibf-dsp561/ibf-dsp561.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2008-2009 I-SYST. * diff --git a/board/imgtec/malta/malta.c b/board/imgtec/malta/malta.c index e31331a..3a9e780 100644 --- a/board/imgtec/malta/malta.c +++ b/board/imgtec/malta/malta.c @@ -93,7 +93,7 @@ int checkboard(void) { enum core_card core; - malta_lcd_puts("U-boot"); + malta_lcd_puts("U-Boot"); puts("Board: MIPS Malta"); core = malta_core_card(); diff --git a/board/ip04/Makefile b/board/ip04/Makefile index caba16f..44fa684 100644 --- a/board/ip04/Makefile +++ b/board/ip04/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2010 Analog Device Inc. # diff --git a/board/ip04/ip04.c b/board/ip04/ip04.c index 70765bc..c7bc334 100644 --- a/board/ip04/ip04.c +++ b/board/ip04/ip04.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2007 David Rowe, * (c) 2006 Ivan Danov diff --git a/board/keymile/km83xx/README.kmeter1 b/board/keymile/km83xx/README.kmeter1 index 7f4fc99..b85d776 100644 --- a/board/keymile/km83xx/README.kmeter1 +++ b/board/keymile/km83xx/README.kmeter1 @@ -60,7 +60,7 @@ Keymile kmeter1 Board Bytes transferred = 204204 (31dac hex) => -4.1 Reflash U-boot Image using U-boot +4.1 Reflash U-Boot Image using U-Boot => run update ..... done diff --git a/board/pr1/Makefile b/board/pr1/Makefile index 4f375a8..8caa360 100644 --- a/board/pr1/Makefile +++ b/board/pr1/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) Switchfin Org. <dpn@switchfin.org> # diff --git a/board/pr1/pr1.c b/board/pr1/pr1.c index bb907f3..3fffabd 100644 --- a/board/pr1/pr1.c +++ b/board/pr1/pr1.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) Switchfin Org. <dpn@switchfin.org> * diff --git a/board/sbc8349/README b/board/sbc8349/README index e2d60cc..3c142e0 100644 --- a/board/sbc8349/README +++ b/board/sbc8349/README @@ -30,21 +30,21 @@ image. Restoring a corrupted or missing flash image: ============================================= -Note that U-boot versions up to and including 2009.06 had essentially -two copies of u-boot in flash; one at the very beginning, which set +Note that U-Boot versions up to and including 2009.06 had essentially +two copies of U-Boot in flash; one at the very beginning, which set the HRCW, and one at the very end, which was the image that was run. As of this point in time, the two have been combined into just one at the beginning of flash, which provides both the HRCW, and the image that is executed. This frees up the remainder of flash for other uses. -Use of the u-boot command "fli" will indicate what parts are in use. -Details for storing U-boot to flash using a Wind River ICE can be found +Use of the U-Boot command "fli" will indicate what parts are in use. +Details for storing U-Boot to flash using a Wind River ICE can be found on page 19 of the board manual (request ERG-00328-001). The following is a summary of that information: - Connect ICE and establish connection to it from WorkBench/OCD. - Ensure you have background mode (BKM) in the OCD terminal window. - Select the appropriate flash type (listed above) - - Prepare a u-boot image by using the Wind River Convert utility; + - Prepare a U-Boot image by using the Wind River Convert utility; by using "Convert and Add file" on the ELF file from your build. Convert from FF80_0000 to FFFF_FFFF (or to FF83_FFFF if you are trying to preserve your old environment settings and user flash). @@ -55,9 +55,9 @@ is a summary of that information: Note that some versions of the register files used with Workbench would zero some TSEC registers, which inhibits ethernet operation -by u-boot when this register file is played to the target. Using +by U-Boot when this register file is played to the target. Using "INN" in the OCD terminal window instead of "IN" before the "GO" -will not play the register file, and allow u-boot to use the TSEC +will not play the register file, and allow U-Boot to use the TSEC interface while executed from the ICE "GO" command. Alternatively, you can locate the register file which will be named @@ -74,7 +74,7 @@ as u-boot.bin. Updating U-Boot with U-Boot: ============================ -This procedure is very similar to other boards that have u-boot installed. +This procedure is very similar to other boards that have U-Boot installed. Assuming that the network has been configured, and that the new u-boot.bin has been copied to the TFTP server, the commands are: @@ -98,7 +98,7 @@ There are three configuration choices: The 1st does not enable CONFIG_PCI, and assumes that the PCI slot will be left empty (M66EN high), and so the board will operate with -a base clock of 66MHz. Note that you need both PCI enabled in u-boot +a base clock of 66MHz. Note that you need both PCI enabled in U-Boot and linux in order to have functional PCI under linux. The only reason for choosing to not enable PCI would be if you had a very early (rev 1.0) CPU with possible PCI issues. diff --git a/board/sbc8548/README b/board/sbc8548/README index feac5e3..0def245 100644 --- a/board/sbc8548/README +++ b/board/sbc8548/README @@ -7,10 +7,10 @@ memory. It also has 128MB SDRAM 100MHz LBC memory, with both a PCI-e, and a PCI-X slot, dual mini-DB9 for UART, and dual RJ-45 for eTSEC ethernet connections. -U-boot Configuration: +U-Boot Configuration: ===================== -The following possible u-boot configuration targets are available: +The following possible U-Boot configuration targets are available: 1) sbc8548_config 2) sbc8548_PCI_33_config @@ -23,7 +23,7 @@ of each choice are listed below. Choice #1 does not enable CONFIG_PCI, and assumes that the PCI slot will be left empty (M66EN high), and so the board will operate with -a base clock of 66MHz. Note that you need both PCI enabled in u-boot +a base clock of 66MHz. Note that you need both PCI enabled in U-Boot and linux in order to have functional PCI under linux. The second enables PCI support and builds for a 33MHz clock rate. Note @@ -100,13 +100,13 @@ from the board's socket to resolve the above i2c address overlap issue and allow SPD autodetection of RAM to work. -Updating U-boot with U-boot: +Updating U-Boot with U-Boot: ============================ -Note that versions of u-boot up to and including 2009.08 had u-boot stored +Note that versions of U-Boot up to and including 2009.08 had U-Boot stored at 0xfff8_0000 -> 0xffff_ffff (512k). Currently it is being stored from 0xfffa_0000 -> 0xffff_ffff (384k). If you use an old macro/script to -update u-boot with u-boot and it uses the old address, you will render +update U-Boot with U-Boot and it uses the old address, you will render your board inoperable, and you will require JTAG recovery. The following steps list how to update with the current address: @@ -120,11 +120,11 @@ The following steps list how to update with the current address: protect on all The "md" steps in the above are just a precautionary step that allow -you to confirm the u-boot version that was downloaded, and then confirm +you to confirm the U-Boot version that was downloaded, and then confirm that it was copied to flash. The above assumes that you are using the default board settings which -have u-boot in the 8MB flash, tied to /CS0. +have U-Boot in the 8MB flash, tied to /CS0. If you are running the default 8MB /CS0 settings but want to store an image in the SODIMM that is built with CONFIG_SYS_ALT_BOOT enabled, @@ -139,7 +139,7 @@ image in the SODIMM that is built with CONFIG_SYS_ALT_BOOT enabled, protect on all Finally, if you are running the alternate 64MB /CS0 settings and want -to update the in-use u-boot image, then (again with CONFIG_SYS_ALT_BOOT +to update the in-use U-Boot image, then (again with CONFIG_SYS_ALT_BOOT enabled) the steps will become: tftp u-boot.bin @@ -155,7 +155,7 @@ Hardware Reference: =================== The following contains some summary information on hardware settings -that are relevant to u-boot, based on the board manual. For the +that are relevant to U-Boot, based on the board manual. For the most up to date and complete details of the board, please request the reference manual ERG-00327-001.pdf from www.windriver.com @@ -166,7 +166,7 @@ Sodimm flash: intel V28F128Jx, 16384x8 (4 devices) at 0xfb80_0000 Note that this address reflects the default setting for the JTAG debugging tools, but since the alignment is - rather inconvenient, u-boot puts it at 0xec00_0000. + rather inconvenient, U-Boot puts it at 0xec00_0000. Jumpers: @@ -193,7 +193,7 @@ is jumpered parallel to the LBC-SDRAM, then /CS0 is for the SODIMM flash and /CS6 is for the boot flash. Note that in this alternate setting, you also need to switch SW2.8 to ON. See the setting CONFIG_SYS_ALT_BOOT if you want to use this setting -and boot u-boot from the 64MB SODIMM +and boot U-Boot from the 64MB SODIMM Switches: @@ -257,7 +257,7 @@ fb80_0000 ff7f_ffff CS6 32 SODIMM flash (64MB) [*] ff80_0000 ffff_ffff CS0 8 Boot flash (8MB) [*] fb80 represents the default programmed by WR JTAG register files, - but u-boot places the flash at either ec00 or fc00 based on JP12. + but U-Boot places the flash at either ec00 or fc00 based on JP12. The EPLD on CS5 demuxes the following devices at the following offsets: diff --git a/board/sbc8641d/README b/board/sbc8641d/README index d07f1cc..4999b77 100644 --- a/board/sbc8641d/README +++ b/board/sbc8641d/README @@ -30,15 +30,15 @@ PCI: 4. Reflashing U-Boot -------------------- The board has two independent flash devices which can be used for dual -booting, or for u-boot backup and recovery. A two pin jumper on the +booting, or for U-Boot backup and recovery. A two pin jumper on the three pin JP10 determines which device is attached to /CS0 line. -Assuming one device has a functional u-boot, and the other device has +Assuming one device has a functional U-Boot, and the other device has a recently installed non-functional image, to perform a recovery from that non-functional image goes essentially as follows: a) power down the board and jumper JP10 to select the functional image. -b) power on the board and let it get to u-boot prompt. +b) power on the board and let it get to U-Boot prompt. c) while on, using static precautions, move JP10 back to the failed image. d) use "md fff00000" to confirm you are looking at the failed image e) turn off write protect with "prot off all" diff --git a/board/seco/mx6quq7/mx6quq7.c b/board/seco/mx6quq7/mx6quq7.c index ea1d4b8..e7523f1 100644 --- a/board/seco/mx6quq7/mx6quq7.c +++ b/board/seco/mx6quq7/mx6quq7.c @@ -103,7 +103,7 @@ int board_mmc_init(bd_t *bis) /* * Following map is done: - * (U-boot device node) (Physical Port) + * (U-Boot device node) (Physical Port) * mmc0 eMMC on Board * mmc1 Ext SD */ diff --git a/board/solidrun/mx6cuboxi/README b/board/solidrun/mx6cuboxi/README index b417ff0..5d0a45d 100644 --- a/board/solidrun/mx6cuboxi/README +++ b/board/solidrun/mx6cuboxi/README @@ -1,7 +1,7 @@ -How to use U-boot on Solid-run mx6 Hummingboard and Cubox-i +How to use U-Boot on Solid-run mx6 Hummingboard and Cubox-i ----------------------------------------------------------- -- Build U-boot for Hummingboard/Cubox-i: +- Build U-Boot for Hummingboard/Cubox-i: $ make mrproper $ make mx6cuboxi_defconfig @@ -17,5 +17,5 @@ sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync -- Insert the SD card in the board, power it up and U-boot messages should +- Insert the SD card in the board, power it up and U-Boot messages should come up. diff --git a/board/tbs/tbs2910/tbs2910.c b/board/tbs/tbs2910/tbs2910.c index 0b509b6..7707cf5 100644 --- a/board/tbs/tbs2910/tbs2910.c +++ b/board/tbs/tbs2910/tbs2910.c @@ -220,7 +220,7 @@ int board_mmc_getcd(struct mmc *mmc) int board_mmc_init(bd_t *bis) { /* - * (U-boot device node) (Physical Port) + * (U-Boot device node) (Physical Port) * mmc0 SD2 * mmc1 SD3 * mmc2 eMMC diff --git a/board/tcm-bf518/Makefile b/board/tcm-bf518/Makefile index 2e029f5..1ce8f64 100644 --- a/board/tcm-bf518/Makefile +++ b/board/tcm-bf518/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/tcm-bf518/tcm-bf518.c b/board/tcm-bf518/tcm-bf518.c index 4348678..7923eae 100644 --- a/board/tcm-bf518/tcm-bf518.c +++ b/board/tcm-bf518/tcm-bf518.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2008-2009 Analog Devices Inc. * diff --git a/board/tcm-bf537/Makefile b/board/tcm-bf537/Makefile index 93a01e4..0fe25e8 100644 --- a/board/tcm-bf537/Makefile +++ b/board/tcm-bf537/Makefile @@ -1,5 +1,5 @@ # -# U-boot - Makefile +# U-Boot - Makefile # # Copyright (c) 2005-2008 Analog Device Inc. # diff --git a/board/tcm-bf537/tcm-bf537.c b/board/tcm-bf537/tcm-bf537.c index 2cf70ca..19df51a 100644 --- a/board/tcm-bf537/tcm-bf537.c +++ b/board/tcm-bf537/tcm-bf537.c @@ -1,5 +1,5 @@ /* - * U-boot - main board file + * U-Boot - main board file * * Copyright (c) 2005-2009 Analog Devices Inc. * diff --git a/board/ti/ks2_evm/README b/board/ti/ks2_evm/README index 0fe5c3b..05baff6 100644 --- a/board/ti/ks2_evm/README +++ b/board/ti/ks2_evm/README @@ -3,7 +3,7 @@ U-Boot port for Texas Instruments Keystone II EVM boards Author: Murali Karicheri <m-karicheri2@ti.com> -This README has information on the u-boot port for K2HK, K2E, and K2L EVM boards. +This README has information on the U-Boot port for K2HK, K2E, and K2L EVM boards. Documentation for this board can be found at http://www.advantech.com/Support/TI-EVM/EVMK2HX_sd.aspx https://www.einfochips.com/index.php/partnerships/texas-instruments/k2e-evm.html @@ -23,7 +23,7 @@ The K2L SoC details are available at Board configuration: ==================== -Some of the peripherals that are configured by u-boot +Some of the peripherals that are configured by U-Boot +------+-------+-------+-----------+-----------+-------+-------+----+ | |DDR3 |NAND |MSM SRAM |ETH ports |UART |I2C |SPI | +------+-------+-------+-----------+-----------+-------+-------+----+ @@ -37,7 +37,7 @@ There are only 2 eth port installed on the boards. There are separate PLLs to drive clocks to Tetris ARM and Peripherals. To bring up SMP Linux on this board, there is a boot monitor code that will be installed in MSMC SRAM. There is command available -to install this image from u-boot. +to install this image from U-Boot. The port related files can be found at following folders keystone2 SoC related files: arch/arm/cpu/armv7/keystone/ @@ -48,7 +48,7 @@ include/configs/k2hk_evm.h include/configs/k2e_evm.h include/configs/k2l_evm.h -As u-boot is migrating to Kconfig there is also board defconfig files +As U-Boot is migrating to Kconfig there is also board defconfig files configs/k2e_evm_defconfig configs/k2hk_evm_defconfig configs/k2l_evm_defconfig @@ -80,7 +80,7 @@ Need Code Composer Studio (CCS) installed on a PC to load and run u-boot-dtb.bin on EVM. See instructions at below link for installing CCS on a Windows PC. http://processors.wiki.ti.com/index.php/MCSDK_UG_Chapter_Getting_Started# Installing_Code_Composer_Studio -Use u-boot-dtb.bin from the build folder for loading and running u-boot binary +Use u-boot-dtb.bin from the build folder for loading and running U-Boot binary on EVM. Follow instructions at K2HK http://processors.wiki.ti.com/index.php/EVMK2H_Hardware_Setup K2E http://processors.wiki.ti.com/index.php/EVMK2E_Hardware_Setup @@ -94,7 +94,7 @@ Start CCS on a Windows machine and Launch Target configuration as instructed at http://processors.wiki.ti.com/index.php/ MCSDK_UG_Chapter_Exploring#Loading_and_Running_U-Boot_on_EVM_through_CCS. The instructions provided in the above link uses a script for -loading the u-boot binary on the target EVM. Instead do the following:- +loading the U-Boot binary on the target EVM. Instead do the following:- 1. Right click to "Texas Instruments XDS2xx USB Emulator_0/CortexA15_1 core (D is connected: Unknown)" at the debug window (This is created once Target @@ -126,41 +126,41 @@ SPI NOR Flash programming instructions U-Boot image can be flashed to first 512KB of the NOR flash using following instructions: -1. Start CCS and run U-boot as described above. +1. Start CCS and run U-Boot as described above. 2. Suspend Target. Select Run -> Suspend from top level menu CortexA15_1 (Free Running)" 3. Load u-boot-spi.gph binary from build folder on to DDR address 0x87000000 through CCS as described in step 2 of "Load and Run U-Boot on K2HK/K2E/K2L EVM using CCS", but using address 0x87000000. -4. Free Run the target as described earlier (step 4) to get u-boot prompt -5. At the U-Boot console type following to setup u-boot environment variables. +4. Free Run the target as described earlier (step 4) to get U-Boot prompt +5. At the U-Boot console type following to setup U-Boot environment variables. setenv addr_uboot 0x87000000 setenv filesize <size in hex of u-boot-spi.gph rounded to hex 0x10000> run burn_uboot_spi - Once u-boot prompt is available, Power OFF the EVM. Set the SW1 dip switch + Once U-Boot prompt is available, Power OFF the EVM. Set the SW1 dip switch to "SPI Little Endian Boot mode" as per instruction at http://processors.wiki.ti.com/index.php/*_Hardware_Setup. -6. Power ON the EVM. The EVM now boots with u-boot image on the NOR flash. +6. Power ON the EVM. The EVM now boots with U-Boot image on the NOR flash. AEMIF NAND Flash programming instructions ====================================== U-Boot image can be flashed to first 1024KB of the NAND flash using following instructions: -1. Start CCS and run U-boot as described above. +1. Start CCS and run U-Boot as described above. 2. Suspend Target. Select Run -> Suspend from top level menu CortexA15_1 (Free Running)" 3. Load MLO binary from build folder on to DDR address 0x87000000 through CCS as described in step 2 of "Load and Run U-Boot on K2HK EVM using CCS", but using address 0x87000000. -4. Free Run the target as described earlier (step 4) to get u-boot prompt -5. At the U-Boot console type following to setup u-boot environment variables. +4. Free Run the target as described earlier (step 4) to get U-Boot prompt +5. At the U-Boot console type following to setup U-Boot environment variables. setenv filesize <size in hex of MLO rounded to hex 0x10000> run burn_uboot_nand - Once u-boot prompt is available, Power OFF the EVM. Set the SW1 dip switch + Once U-Boot prompt is available, Power OFF the EVM. Set the SW1 dip switch to "ARM NAND Boot mode" as per instruction at http://processors.wiki.ti.com/index.php/*_Hardware_Setup. -6. Power ON the EVM. The EVM now boots with u-boot image on the NAND flash. +6. Power ON the EVM. The EVM now boots with U-Boot image on the NAND flash. Load and Run U-Boot on keystone EVMs using UART download ======================================================== @@ -171,4 +171,4 @@ Open BMC and regular UART terminals. 2. Using BMC terminal set the ARM-UART bootmode and reboot the EVM BMC> bootmode #4 MBC> reboot -3. When xmodem is complete you should see the u-boot starts on the UART port +3. When xmodem is complete you should see the U-Boot starts on the UART port diff --git a/board/tqc/tqma6/tqma6.c b/board/tqc/tqma6/tqma6.c index 8656782..7fc57da 100644 --- a/board/tqc/tqma6/tqma6.c +++ b/board/tqc/tqma6/tqma6.c @@ -77,7 +77,7 @@ static iomux_v3_cfg_t const tqma6_usdhc3_pads[] = { /* * According to board_mmc_init() the following map is done: - * (U-boot device node) (Physical Port) + * (U-Boot device node) (Physical Port) * mmc0 eMMC (SD3) on TQMa6 * mmc1 .. n optional slots used on baseboard */ diff --git a/board/wandboard/README b/board/wandboard/README index c6c0132..6345416 100644 --- a/board/wandboard/README +++ b/board/wandboard/README @@ -9,7 +9,7 @@ SoCs: mx6 quad, mx6 dual lite and mx6 solo. For more details about Wandboard, please refer to: http://www.wandboard.org/ -Building U-boot for Wandboard +Building U-Boot for Wandboard ----------------------------- To build U-Boot for the Wandboard: @@ -17,7 +17,7 @@ To build U-Boot for the Wandboard: $ make wandboard_config $ make -Flashing U-boot into the SD card +Flashing U-Boot into the SD card -------------------------------- - After the 'make' command completes, the generated 'SPL' binary must be @@ -36,4 +36,4 @@ as the mx6 processor) - Connect the serial cable to the host PC -- Power up the board and U-boot messages will appear in the serial console. +- Power up the board and U-Boot messages will appear in the serial console. diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c index ac001ed..4ce74cd 100644 --- a/board/wandboard/wandboard.c +++ b/board/wandboard/wandboard.c @@ -155,7 +155,7 @@ int board_mmc_init(bd_t *bis) /* * Following map is done: - * (U-boot device node) (Physical Port) + * (U-Boot device node) (Physical Port) * mmc0 SOM MicroSD * mmc1 Carrier board MicroSD */ diff --git a/board/warp/README b/board/warp/README index 22f9055..3cfd22e 100644 --- a/board/warp/README +++ b/board/warp/README @@ -1,4 +1,4 @@ -How to Update U-boot on Warp board +How to Update U-Boot on Warp board ---------------------------------- Required software on the host PC: @@ -7,13 +7,13 @@ Required software on the host PC: - dfu-util: http://dfu-util.sourceforge.net/releases/ -Build U-boot for Warp: +Build U-Boot for Warp: $ make mrproper $ make warp_config $ make -This will generate the U-boot binary called u-boot.imx. +This will generate the U-Boot binary called u-boot.imx. Put warp board in USB download mode @@ -29,7 +29,7 @@ Load u-boot.imx via USB: $ sudo ./imx_usb u-boot.imx -Then U-boot should start and its messages will appear in the console program. +Then U-Boot should start and its messages will appear in the console program. Use the default environment variables: @@ -43,7 +43,7 @@ Transfer u-boot.imx that will be flashed into the eMMC: $ sudo dfu-util -D u-boot.imx -a boot -Then on the U-boot prompt the following message should be seen after a +Then on the U-Boot prompt the following message should be seen after a successful upgrade: #DOWNLOAD ... OK @@ -53,4 +53,4 @@ Remove power from the warp board. Put warp board into normal boot mode -Power up the board and the new updated U-boot should boot from eMMC +Power up the board and the new updated U-Boot should boot from eMMC |