Merge branch 'master' of git://git.denx.de/u-boot-sunxi

trini: Disable CONFIG_SPL_USE_ARCH_MEMSET on orangepi_2

Signed-off-by: Tom Rini <trini@konsulko.com>

3 files changed, 38 insertions, 8 deletions

diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 37b4252..3e0e262 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -27,6 +27,17 @@ config SPL_POWER_SUPPORT
 config SPL_SERIAL_SUPPORT
 	default y
 
+config SUNXI_HIGH_SRAM
+	bool
+	default n
+	---help---
+	Older Allwinner SoCs have their mask boot ROM mapped just below 4GB,
+	with the first SRAM region being located at address 0.
+	Some newer SoCs map the boot ROM at address 0 instead and move the
+	SRAM to 64KB, just behind the mask ROM.
+	Chips using the latter setup are supposed to select this option to
+	adjust the addresses accordingly.
+
 # Note only one of these may be selected at a time! But hidden choices are
 # not supported by Kconfig
 config SUNXI_GEN_SUN4I
@@ -43,6 +54,11 @@ config SUNXI_GEN_SUN6I
 	watchdog, etc.
 
 
+config MACH_SUNXI_H3_H5
+	bool
+	select SUNXI_GEN_SUN6I
+	select SUPPORT_SPL
+
 choice
 	prompt "Sunxi SoC Variant"
 	optional
@@ -50,12 +66,14 @@ choice
 config MACH_SUN4I
 	bool "sun4i (Allwinner A10)"
 	select CPU_V7
+	select ARM_CORTEX_CPU_IS_UP
 	select SUNXI_GEN_SUN4I
 	select SUPPORT_SPL
 
 config MACH_SUN5I
 	bool "sun5i (Allwinner A13)"
 	select CPU_V7
+	select ARM_CORTEX_CPU_IS_UP
 	select SUNXI_GEN_SUN4I
 	select SUPPORT_SPL
 
@@ -111,13 +129,13 @@ config MACH_SUN8I_H3
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
 	select ARCH_SUPPORT_PSCI
-	select SUNXI_GEN_SUN6I
-	select SUPPORT_SPL
+	select MACH_SUNXI_H3_H5
 	select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
 
 config MACH_SUN9I
 	bool "sun9i (Allwinner A80)"
 	select CPU_V7
+	select SUNXI_HIGH_SRAM
 	select SUNXI_GEN_SUN6I
 	select SUPPORT_SPL
 
@@ -125,14 +143,21 @@ config MACH_SUN50I
 	bool "sun50i (Allwinner A64)"
 	select ARM64
 	select SUNXI_GEN_SUN6I
+	select SUNXI_HIGH_SRAM
 	select SUPPORT_SPL
 
+config MACH_SUN50I_H5
+	bool "sun50i (Allwinner H5)"
+	select ARM64
+	select MACH_SUNXI_H3_H5
+	select SUNXI_HIGH_SRAM
+
 endchoice
 
 # The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33"
 config MACH_SUN8I
 	bool
-	default y if MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_H3 || MACH_SUN8I_A83T
+	default y if MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUNXI_H3_H5 || MACH_SUN8I_A83T
 
 config RESERVE_ALLWINNER_BOOT0_HEADER
 	bool "reserve space for Allwinner boot0 header"
@@ -320,7 +345,7 @@ config OLD_SUNXI_KERNEL_COMPAT
 
 config MMC0_CD_PIN
 	string "Card detect pin for mmc0"
-	default "PF6" if MACH_SUN8I_A83T || MACH_SUN8I_H3 || MACH_SUN50I
+	default "PF6" if MACH_SUN8I_A83T || MACH_SUNXI_H3_H5 || MACH_SUN50I
 	default ""
 	---help---
 	Set the card detect pin for mmc0, leave empty to not use cd. This
@@ -485,7 +510,7 @@ config AXP_GPIO
 
 config VIDEO
 	bool "Enable graphical uboot console on HDMI, LCD or VGA"
-	depends on !MACH_SUN8I_A83T && !MACH_SUN8I_H3 && !MACH_SUN9I && !MACH_SUN50I
+	depends on !MACH_SUN8I_A83T && !MACH_SUNXI_H3_H5 && !MACH_SUN9I && !MACH_SUN50I
 	default y
 	---help---
 	Say Y here to add support for using a cfb console on the HDMI, LCD
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 2321b8b..3f21129 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -242,6 +242,11 @@ M:	Icenowy Zheng <icenowy@aosc.xyz>
 S:	Maintained
 F:	configs/orangepi_zero_defconfig
 
+ORANGEPI PC 2 BOARD
+M:	Andre Przywara <andre.przywara@arm.com>
+S:	Maintained
+F:	configs/orangepi_pc2_defconfig
+
 R16 EVB PARROT BOARD
 M:	Quentin Schulz <quentin.schulz@free-electrons.com>
 S:	Maintained
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 5365638..b966012 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -100,14 +100,14 @@ int board_init(void)
 		 * we avoid the risk of writing to it.
 		 */
 		asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r"(freq));
-		if (freq != CONFIG_TIMER_CLK_FREQ) {
+		if (freq != COUNTER_FREQUENCY) {
 			debug("arch timer frequency is %d Hz, should be %d, fixing ...\n",
-			      freq, CONFIG_TIMER_CLK_FREQ);
+			      freq, COUNTER_FREQUENCY);
 #ifdef CONFIG_NON_SECURE
 			printf("arch timer frequency is wrong, but cannot adjust it\n");
 #else
 			asm volatile("mcr p15, 0, %0, c14, c0, 0"
-				     : : "r"(CONFIG_TIMER_CLK_FREQ));
+				     : : "r"(COUNTER_FREQUENCY));
 #endif
 		}
 	}