Merge git://git.denx.de/u-boot-sunxi

trini: Make Kconfig SPL_xxx entires only show if SPL, so that we don't
get Kconfig errors on platforms without SPL, ie sandbox (without SPL).

Signed-off-by: Tom Rini <trini@konsulko.com>

2 files changed, 110 insertions, 0 deletions

diff --git a/doc/uImage.FIT/howto.txt b/doc/uImage.FIT/howto.txt
index 14e316f..2988a52 100644
--- a/doc/uImage.FIT/howto.txt
+++ b/doc/uImage.FIT/howto.txt
@@ -44,6 +44,27 @@ image source file     mkimage + dtc		  transfer to target
 	+	     ---------------> image file --------------------> bootm
 image data file(s)
 
+SPL usage
+---------
+
+The SPL can make use of the new image format as well, this traditionally
+is used to ship multiple device tree files within one image. Code in the SPL
+will choose the one matching the current board and append this to the
+U-Boot proper binary to be automatically used up by it.
+Aside from U-Boot proper and one device tree blob the SPL can load multiple,
+arbitrary image files as well. These binaries should be specified in their
+own subnode under the /images node, which should then be referenced from one or
+multiple /configurations subnodes. The required images must be enumerated in
+the "loadables" property as a list of strings.
+
+If a platform specific image source file (.its) is shipped with the U-Boot
+source, it can be specified using the CONFIG_SPL_FIT_SOURCE Kconfig symbol.
+In this case it will be automatically used by U-Boot's Makefile to generate
+the image.
+If a static source file is not flexible enough, CONFIG_SPL_FIT_GENERATOR
+can point to a script which generates this image source file during
+the build process. It gets passed a list of device tree files (taken from the
+CONFIG_OF_LIST symbol).
 
 Example 1 -- old-style (non-FDT) kernel booting
 -----------------------------------------------
diff --git a/doc/uImage.FIT/multi_spl.its b/doc/uImage.FIT/multi_spl.its
new file mode 100644
index 0000000..e5551d4
--- /dev/null
+++ b/doc/uImage.FIT/multi_spl.its
@@ -0,0 +1,89 @@
+/dts-v1/;
+
+/*
+ * (Bogus) example FIT image description file demonstrating the usage
+ * of multiple images loaded by the SPL.
+ * Several binaries will be loaded at their respective load addresses.
+ * Finally the one image specifying an entry point will be entered by the SPL.
+ */
+
+/ {
+	description = "multiple firmware blobs and U-Boot, loaded by SPL";
+	#address-cells = <0x1>;
+
+	images {
+
+		uboot {
+			description = "U-Boot (64-bit)";
+			type = "standalone";
+			arch = "arm64";
+			compression = "none";
+			load = <0x4a000000>;
+		};
+
+		atf {
+			description = "ARM Trusted Firmware";
+			type = "firmware";
+			arch = "arm64";
+			compression = "none";
+			load = <0x18000>;
+			entry = <0x18000>;
+		};
+
+		mgmt-firmware {
+			description = "arisc management processor firmware";
+			type = "firmware";
+			arch = "or1k";
+			compression = "none";
+			load = <0x40000>;
+		};
+
+		fdt@1 {
+			description = "Pine64+ DT";
+			type = "flat_dt";
+			compression = "none";
+			load = <0x4fa00000>;
+			arch = "arm64";
+		};
+
+		fdt@2 {
+			description = "Pine64 DT";
+			type = "flat_dt";
+			compression = "none";
+			load = <0x4fa00000>;
+			arch = "arm64";
+		};
+
+		kernel {
+			description = "4.7-rc5 kernel";
+			type = "kernel";
+			compression = "none";
+			load = <0x40080000>;
+			arch = "arm64";
+		};
+
+		initrd {
+			description = "Debian installer initrd";
+			type = "ramdisk";
+			compression = "none";
+			load = <0x4fe00000>;
+			arch = "arm64";
+		};
+	};
+
+	configurations {
+		default = "config@1";
+
+		config@1 {
+			description = "sun50i-a64-pine64-plus";
+			loadables = "uboot", "atf", "kernel", "initrd";
+			fdt = "fdt@1";
+		};
+
+		config@2 {
+			description = "sun50i-a64-pine64";
+			loadables = "uboot", "atf", "mgmt-firmware";
+			fdt = "fdt@2";
+		};
+	};
+};