diff options
author | Minghuan Lian <Minghuan.Lian@freescale.com> | 2015-03-27 05:24:39 (GMT) |
---|---|---|
committer | York Sun <yorksun@freescale.com> | 2015-05-04 16:24:23 (GMT) |
commit | 1d0b59a9b049443397f484ad03b88c6314bc7ebb (patch) | |
tree | 3aa8fc04de6bfd03c81ee07ee443bec9be07995d /drivers/pci/fsl_pci_init.c | |
parent | 5066e62847bddf6030262ade2aa3e7bcdc930037 (diff) | |
download | u-boot-fsl-qoriq-1d0b59a9b049443397f484ad03b88c6314bc7ebb.tar.xz |
fsl/pci: Set CFG_READY for PCIe v3.0 and later
Freescale PCIe controllers v3.0 and later need to set bit
CFG_READY to allow all inbound configuration transactions
to be processed normally when in EP mode. However, bit
CFG_READY has been moved from PCIe configuration space to
CCSR PCIe configuration register comparing previous version.
The patch is to set this bit according to PCIe version.
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
Diffstat (limited to 'drivers/pci/fsl_pci_init.c')
-rw-r--r-- | drivers/pci/fsl_pci_init.c | 8 |
1 files changed, 7 insertions, 1 deletions
diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index 152045e..52792dc 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -697,8 +697,14 @@ void fsl_pci_config_unlock(struct pci_controller *hose) pcie_cap_pos = pci_hose_find_capability(hose, dev, PCI_CAP_ID_EXP); pci_hose_read_config_byte(hose, dev, pcie_cap_pos, &pcie_cap); if (pcie_cap != 0x0) { + ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)hose->cfg_addr; + u32 block_rev = in_be32(&pci->block_rev1); /* PCIe - set CFG_READY bit of Configuration Ready Register */ - pci_hose_write_config_byte(hose, dev, FSL_PCIE_CFG_RDY, 0x1); + if (block_rev >= PEX_IP_BLK_REV_3_0) + setbits_be32(&pci->config, FSL_PCIE_V3_CFG_RDY); + else + pci_hose_write_config_byte(hose, dev, + FSL_PCIE_CFG_RDY, 0x1); } else { /* PCI - clear ACL bit of PBFR */ pci_hose_read_config_word(hose, dev, FSL_PCI_PBFR, &pbfr); |