diff options
author | Marek Vasut <marex@denx.de> | 2013-07-30 21:37:53 (GMT) |
---|---|---|
committer | Anatolij Gustschin <agust@denx.de> | 2013-08-09 19:48:49 (GMT) |
commit | 9de4b729eb42dab9ed35ab7079d7d2a9241b0d07 (patch) | |
tree | 27214eb2b87e69da46b89484845110ee6a689a86 /drivers/video/mxsfb.c | |
parent | e57baf5d199e9a330032de29025af955717ebdf9 (diff) | |
download | u-boot-fsl-qoriq-9de4b729eb42dab9ed35ab7079d7d2a9241b0d07.tar.xz |
video: Add System-Mode configuration hook into mxsfb
Add hook that allow configuring SmartLCD attached the MXS LCDIF
controller operating in System-Mode. This hook can be overriden
by a platform-specific SmartLCD programming routine, which writes
the SmartLCD specific values into it's registers.
Also, this patch makes sure the SYNC signals are off for the
SmartLCD case.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Stefano Babic <sbabic@denx.de>
Diffstat (limited to 'drivers/video/mxsfb.c')
-rw-r--r-- | drivers/video/mxsfb.c | 16 |
1 files changed, 16 insertions, 0 deletions
diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c index 374c823..c55cb44 100644 --- a/drivers/video/mxsfb.c +++ b/drivers/video/mxsfb.c @@ -21,6 +21,17 @@ static GraphicDevice panel; +/** + * mxsfb_system_setup() - Fine-tune LCDIF configuration + * + * This function is used to adjust the LCDIF configuration. This is usually + * needed when driving the controller in System-Mode to operate an 8080 or + * 6800 connected SmartLCD. + */ +__weak void mxsfb_system_setup(void) +{ +} + /* * DENX M28EVK: * setenv videomode @@ -75,6 +86,9 @@ static void mxs_lcd_init(GraphicDevice *panel, writel(valid_data << LCDIF_CTRL1_BYTE_PACKING_FORMAT_OFFSET, ®s->hw_lcdif_ctrl1); + + mxsfb_system_setup(); + writel((mode->yres << LCDIF_TRANSFER_COUNT_V_COUNT_OFFSET) | mode->xres, ®s->hw_lcdif_transfer_count); @@ -102,8 +116,10 @@ static void mxs_lcd_init(GraphicDevice *panel, /* Flush FIFO first */ writel(LCDIF_CTRL1_FIFO_CLEAR, ®s->hw_lcdif_ctrl1_set); +#ifndef CONFIG_VIDEO_MXS_MODE_SYSTEM /* Sync signals ON */ setbits_le32(®s->hw_lcdif_vdctrl4, LCDIF_VDCTRL4_SYNC_SIGNALS_ON); +#endif /* FIFO cleared */ writel(LCDIF_CTRL1_FIFO_CLEAR, ®s->hw_lcdif_ctrl1_clr); |