diff options
author | wdenk <wdenk> | 2003-08-17 18:55:18 (GMT) |
---|---|---|
committer | wdenk <wdenk> | 2003-08-17 18:55:18 (GMT) |
commit | e0ac62d798ce60ec5d43125d4786e58b0d881836 (patch) | |
tree | 3f32c8f29ff9089ef61099b11d81d51039bf2162 /drivers | |
parent | ae3af05ec986a8ac66dadb5eafe13db2d4a02c5c (diff) | |
download | u-boot-fsl-qoriq-e0ac62d798ce60ec5d43125d4786e58b0d881836.tar.xz |
* Make Ethernet autonegotiation on INCA-IP work for all clock rates;
allow selection of clock frequency as "make" target
* Implement memory autosizing code for IceCube boards
* Configure network port on INCA-IP for autonegotiation
* Fix overflow problem in network timeout code
* Patch by Richard Woodruff, 8 Aug 2003:
Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/inca-ip_sw.c | 302 | ||||
-rw-r--r-- | drivers/pci_auto.c | 7 |
2 files changed, 144 insertions, 165 deletions
diff --git a/drivers/inca-ip_sw.c b/drivers/inca-ip_sw.c index 07e86fc..f5009d4 100644 --- a/drivers/inca-ip_sw.c +++ b/drivers/inca-ip_sw.c @@ -70,10 +70,8 @@ typedef struct { - union - { - struct - { + union { + struct { volatile u32 HOLD :1; volatile u32 ICpt :1; volatile u32 IEop :1; @@ -89,10 +87,8 @@ typedef struct volatile u32 RxDataPtr; - union - { - struct - { + union { + struct { volatile u32 C :1; volatile u32 Sop :1; volatile u32 Eop :1; @@ -108,10 +104,8 @@ typedef struct typedef struct { - union - { - struct - { + union { + struct { volatile u32 HOLD :1; volatile u32 Eop :1; volatile u32 Sop :1; @@ -159,8 +153,7 @@ int inca_switch_initialize(bd_t * bis) printf("Entered inca_switch_initialize()\n"); #endif - if (!(dev = (struct eth_device *) malloc (sizeof *dev))) - { + if (!(dev = (struct eth_device *) malloc (sizeof *dev))) { printf("Failed to allocate memory\n"); return 0; } @@ -196,8 +189,8 @@ static int inca_switch_init(struct eth_device *dev, bd_t * bis) printf("Entering inca_switch_init()\n"); #endif - /* Set MAC address. - */ + /* Set MAC address. + */ wTmp = (u16)dev->enetaddr[0]; regValue = (wTmp << 8) | dev->enetaddr[1]; @@ -211,35 +204,32 @@ static int inca_switch_init(struct eth_device *dev, bd_t * bis) SW_WRITE_REG(INCA_IP_Switch_PMAC_SA2, regValue); - /* Initialize the descriptor rings. - */ + /* Initialize the descriptor rings. + */ for (i = 0; i < NUM_RX_DESC; i++) { inca_rx_descriptor_t * rx_desc = KSEG1ADDR(&rx_ring[i]); memset(rx_desc, 0, sizeof(rx_ring[i])); - /* Set maximum size of receive buffer. - */ + /* Set maximum size of receive buffer. + */ rx_desc->params.field.NFB = PKTSIZE_ALIGN; - /* Set the offset of the receive buffer. Zero means - * that the offset mechanism is not used. - */ + /* Set the offset of the receive buffer. Zero means + * that the offset mechanism is not used. + */ rx_desc->params.field.offset = 0; /* Check if it is the last descriptor. */ - if (i == (NUM_RX_DESC - 1)) - { - /* Let the last descriptor point to the first - * one. - */ + if (i == (NUM_RX_DESC - 1)) { + /* Let the last descriptor point to the first + * one. + */ rx_desc->nextRxDescPtr = KSEG1ADDR((u32)rx_ring); - } - else - { - /* Set the address of the next descriptor. - */ + } else { + /* Set the address of the next descriptor. + */ rx_desc->nextRxDescPtr = (u32)KSEG1ADDR(&rx_ring[i+1]); } @@ -251,8 +241,7 @@ static int inca_switch_init(struct eth_device *dev, bd_t * bis) printf("tx_ring = 0x%08X 0x%08X\n", (u32)tx_ring, (u32)&tx_ring[0]); #endif - for (i = 0; i < NUM_TX_DESC; i++) - { + for (i = 0; i < NUM_TX_DESC; i++) { inca_tx_descriptor_t * tx_desc = KSEG1ADDR(&tx_ring[i]); memset(tx_desc, 0, sizeof(tx_ring[i])); @@ -263,46 +252,43 @@ static int inca_switch_init(struct eth_device *dev, bd_t * bis) /* Check if it is the last descriptor. */ - if (i == (NUM_TX_DESC - 1)) - { + if (i == (NUM_TX_DESC - 1)) { /* Let the last descriptor point to the * first one. */ tx_desc->nextTxDescPtr = KSEG1ADDR((u32)tx_ring); - } - else - { + } else { /* Set the address of the next descriptor. */ tx_desc->nextTxDescPtr = (u32)KSEG1ADDR(&tx_ring[i+1]); } } - /* Initialize RxDMA. - */ + /* Initialize RxDMA. + */ DMA_READ_REG(INCA_IP_DMA_DMA_RXISR, v); #if 0 printf("RX status = 0x%08X\n", v); #endif - /* Writing to the FRDA of CHANNEL. - */ + /* Writing to the FRDA of CHANNEL. + */ DMA_WRITE_REG(INCA_IP_DMA_DMA_RXFRDA0, (u32)rx_ring); - /* Writing to the COMMAND REG. - */ + /* Writing to the COMMAND REG. + */ DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_INIT); - /* Initialize TxDMA. - */ + /* Initialize TxDMA. + */ DMA_READ_REG(INCA_IP_DMA_DMA_TXISR, v); #if 0 printf("TX status = 0x%08X\n", v); #endif - /* Writing to the FRDA of CHANNEL. - */ + /* Writing to the FRDA of CHANNEL. + */ DMA_WRITE_REG(INCA_IP_DMA_DMA_TXFRDA0, (u32)tx_ring); tx_new = rx_new = 0; @@ -313,12 +299,12 @@ static int inca_switch_init(struct eth_device *dev, bd_t * bis) #if 0 rx_ring[rx_hold].params.field.HOLD = 1; #endif - /* enable spanning tree forwarding, enable the CPU port */ - /* ST_PT: - CPS (CPU port status) 0x3 (forwarding) - LPS (LAN port status) 0x3 (forwarding) - PPS (PC port status) 0x3 (forwarding) - */ + /* enable spanning tree forwarding, enable the CPU port */ + /* ST_PT: + * CPS (CPU port status) 0x3 (forwarding) + * LPS (LAN port status) 0x3 (forwarding) + * PPS (PC port status) 0x3 (forwarding) + */ SW_WRITE_REG(INCA_IP_Switch_ST_PT,0x3f); #if 0 @@ -342,23 +328,19 @@ static int inca_switch_send(struct eth_device *dev, volatile void *packet, printf("Entered inca_switch_send()\n"); #endif - if (length <= 0) - { + if (length <= 0) { printf ("%s: bad packet size: %d\n", dev->name, length); goto Done; } - for(i = 0; tx_desc->C == 0; i++) - { - if (i >= TOUT_LOOP) - { + for(i = 0; tx_desc->C == 0; i++) { + if (i >= TOUT_LOOP) { printf("%s: tx error buffer not ready\n", dev->name); goto Done; } } - if (tx_old_hold >= 0) - { + if (tx_old_hold >= 0) { KSEG1ADDR(&tx_ring[tx_old_hold])->params.field.HOLD = 1; } tx_old_hold = tx_hold; @@ -376,13 +358,10 @@ static int inca_switch_send(struct eth_device *dev, volatile void *packet, tx_new = (tx_new + 1) % NUM_TX_DESC; - if (! initialized) - { + if (! initialized) { command = INCA_IP_DMA_DMA_TXCCR0_INIT; initialized = 1; - } - else - { + } else { command = INCA_IP_DMA_DMA_TXCCR0_HR; } @@ -394,10 +373,8 @@ static int inca_switch_send(struct eth_device *dev, volatile void *packet, DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, regValue); #if 1 - for(i = 0; KSEG1ADDR(&tx_ring[tx_hold])->C == 0; i++) - { - if (i >= TOUT_LOOP) - { + for(i = 0; KSEG1ADDR(&tx_ring[tx_hold])->C == 0; i++) { + if (i >= TOUT_LOOP) { printf("%s: tx buffer not ready\n", dev->name); goto Done; } @@ -421,12 +398,10 @@ static int inca_switch_recv(struct eth_device *dev) printf("Entered inca_switch_recv()\n"); #endif - for (;;) - { + for (;;) { rx_desc = KSEG1ADDR(&rx_ring[rx_new]); - if (rx_desc->status.field.C == 0) - { + if (rx_desc->status.field.C == 0) { break; } @@ -434,8 +409,7 @@ static int inca_switch_recv(struct eth_device *dev) rx_ring[rx_new].params.field.HOLD = 1; #endif - if (! rx_desc->status.field.Eop) - { + if (! rx_desc->status.field.Eop) { printf("Partly received packet!!!\n"); break; } @@ -454,16 +428,13 @@ static int inca_switch_recv(struct eth_device *dev) } #endif - if (length) - { + if (length) { #if 0 printf("Received %d bytes\n", length); #endif NetReceive((void*)KSEG1ADDR(NetRxPackets[rx_new]), length - 4); - } - else - { + } else { #if 1 printf("Zero length!!!\n"); #endif @@ -495,16 +466,16 @@ static void inca_switch_halt(struct eth_device *dev) initialized = 0; #endif #if 1 - /* Disable forwarding to the CPU port. - */ + /* Disable forwarding to the CPU port. + */ SW_WRITE_REG(INCA_IP_Switch_ST_PT,0xf); - /* Close RxDMA channel. - */ + /* Close RxDMA channel. + */ DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF); - /* Close TxDMA channel. - */ + /* Close TxDMA channel. + */ DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, INCA_IP_DMA_DMA_TXCCR0_OFF); @@ -519,88 +490,89 @@ static void inca_init_switch_chip(void) { u32 regValue; - /* To workaround a problem with collision counter - * (see Errata sheet). - */ + /* To workaround a problem with collision counter + * (see Errata sheet). + */ SW_WRITE_REG(INCA_IP_Switch_PC_TX_CTL, 0x00000001); SW_WRITE_REG(INCA_IP_Switch_LAN_TX_CTL, 0x00000001); #if 1 - /* init MDIO configuration: - MDS (Poll speed): 0x01 (4ms) - PHY_LAN_ADDR: 0x06 - PHY_PC_ADDR: 0x05 - UEP (Use External PHY): 0x00 (Internal PHY is used) - PS (Port Select): 0x00 (PT/UMM for LAN) - PT (PHY Test): 0x00 (no test mode) - UMM (Use MDIO Mode): 0x00 (state machine is disabled) - */ + /* init MDIO configuration: + * MDS (Poll speed): 0x01 (4ms) + * PHY_LAN_ADDR: 0x06 + * PHY_PC_ADDR: 0x05 + * UEP (Use External PHY): 0x00 (Internal PHY is used) + * PS (Port Select): 0x00 (PT/UMM for LAN) + * PT (PHY Test): 0x00 (no test mode) + * UMM (Use MDIO Mode): 0x00 (state machine is disabled) + */ SW_WRITE_REG(INCA_IP_Switch_MDIO_CFG, 0x4c50); - /* init PHY: - SL (Auto Neg. Speed for LAN) - SP (Auto Neg. Speed for PC) - LL (Link Status for LAN) - LP (Link Status for PC) - DL (Duplex Status for LAN) - DP (Duplex Status for PC) - PL (Auto Neg. Pause Status for LAN) - PP (Auto Neg. Pause Status for PC) - */ + /* init PHY: + * SL (Auto Neg. Speed for LAN) + * SP (Auto Neg. Speed for PC) + * LL (Link Status for LAN) + * LP (Link Status for PC) + * DL (Duplex Status for LAN) + * DP (Duplex Status for PC) + * PL (Auto Neg. Pause Status for LAN) + * PP (Auto Neg. Pause Status for PC) + */ SW_WRITE_REG (INCA_IP_Switch_EPHY, 0xff); - /* MDIO_ACC: - RA (Request/Ack) 0x01 (Request) - RW (Read/Write) 0x01 (Write) - PHY_ADDR 0x05 (PC) - REG_ADDR 0x00 (PHY_BCR: basic control register) - PHY_DATA 0x8000 - Reset - software reset - LB (loop back) - normal - SS (speed select) - 10 Mbit/s - ANE (auto neg. enable) - disable - PD (power down) - normal - ISO (isolate) - normal - RAN (restart auto neg.) - normal - DM (duplex mode) - half duplex - CT (collision test) - enable - */ - SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0a08000); - - /* MDIO_ACC: - RA (Request/Ack) 0x01 (Request) - RW (Read/Write) 0x01 (Write) - PHY_ADDR 0x06 (LAN) - REG_ADDR 0x00 (PHY_BCR: basic control register) - PHY_DATA 0x8000 - Reset - software reset - LB (loop back) - normal - SS (speed select) - 10 Mbit/s - ANE (auto neg. enable) - disable - PD (power down) - normal - ISO (isolate) - normal - RAN (restart auto neg.) - normal - DM (duplex mode) - half duplex - CT (collision test) - enable - */ - SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0c08000); + /* MDIO_ACC: + * RA (Request/Ack) 0x01 (Request) + * RW (Read/Write) 0x01 (Write) + * PHY_ADDR 0x05 (PC) + * REG_ADDR 0x00 (PHY_BCR: basic control register) + * PHY_DATA 0x8000 + * Reset - software reset + * LB (loop back) - normal + * SS (speed select) - 10 Mbit/s + * ANE (auto neg. enable) - enable + * PD (power down) - normal + * ISO (isolate) - normal + * RAN (restart auto neg.) - normal + * DM (duplex mode) - half duplex + * CT (collision test) - enable + */ + SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0a09000); + + /* MDIO_ACC: + * RA (Request/Ack) 0x01 (Request) + * RW (Read/Write) 0x01 (Write) + * PHY_ADDR 0x06 (LAN) + * REG_ADDR 0x00 (PHY_BCR: basic control register) + * PHY_DATA 0x8000 + * Reset - software reset + * LB (loop back) - normal + * SS (speed select) - 10 Mbit/s + * ANE (auto neg. enable) - enable + * PD (power down) - normal + * ISO (isolate) - normal + * RAN (restart auto neg.) - normal + * DM (duplex mode) - half duplex + * CT (collision test) - enable + */ + SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0c09000); + #endif - /* Make sure the CPU port is disabled for now. We - * don't want packets to get stacked for us until - * we enable DMA and are prepared to receive them. - */ + /* Make sure the CPU port is disabled for now. We + * don't want packets to get stacked for us until + * we enable DMA and are prepared to receive them. + */ SW_WRITE_REG(INCA_IP_Switch_ST_PT,0xf); SW_READ_REG(INCA_IP_Switch_ARL_CTL, regValue); - /* CRC GEN is enabled. - */ + /* CRC GEN is enabled. + */ regValue |= 0x00000200; SW_WRITE_REG(INCA_IP_Switch_ARL_CTL, regValue); - /* ADD TAG is disabled. - */ + /* ADD TAG is disabled. + */ SW_READ_REG(INCA_IP_Switch_PMAC_HD_CTL, regValue); regValue &= ~0x00000002; SW_WRITE_REG(INCA_IP_Switch_PMAC_HD_CTL, regValue); @@ -609,8 +581,8 @@ static void inca_init_switch_chip(void) static void inca_dma_init(void) { - /* Switch off all DMA channels. - */ + /* Switch off all DMA channels. + */ DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF); DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR1, INCA_IP_DMA_DMA_RXCCR1_OFF); @@ -618,20 +590,20 @@ static void inca_dma_init(void) DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR1, INCA_IP_DMA_DMA_TXCCR1_OFF); DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR2, INCA_IP_DMA_DMA_TXCCR2_OFF); - /* Setup TX channel polling time. - */ + /* Setup TX channel polling time. + */ DMA_WRITE_REG(INCA_IP_DMA_DMA_TXPOLL, INCA_DMA_TX_POLLING_TIME); - /* Setup RX channel polling time. - */ + /* Setup RX channel polling time. + */ DMA_WRITE_REG(INCA_IP_DMA_DMA_RXPOLL, INCA_DMA_RX_POLLING_TIME); - /* ERRATA: write reset value into the DMA RX IMR register. - */ + /* ERRATA: write reset value into the DMA RX IMR register. + */ DMA_WRITE_REG(INCA_IP_DMA_DMA_RXIMR, 0xFFFFFFFF); - /* Just in case: disable all transmit interrupts also. - */ + /* Just in case: disable all transmit interrupts also. + */ DMA_WRITE_REG(INCA_IP_DMA_DMA_TXIMR, 0xFFFFFFFF); DMA_WRITE_REG(INCA_IP_DMA_DMA_TXISR, 0xFFFFFFFF); diff --git a/drivers/pci_auto.c b/drivers/pci_auto.c index 8fe72a3..20acc07 100644 --- a/drivers/pci_auto.c +++ b/drivers/pci_auto.c @@ -323,6 +323,13 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev) hose->current_busno++; break; +#ifdef CONFIG_MPC5200 + case PCI_CLASS_BRIDGE_OTHER: + DEBUGF("PCI Autoconfig: Skipping bridge device %d\n", + PCI_DEV(dev)); + break; +#endif + default: pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_io); break; |