diff options
author | Wolfgang Denk <wd@denx.de> | 2010-06-29 19:58:16 (GMT) |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2010-06-29 19:58:16 (GMT) |
commit | e365c43d6aa69b544a8f81d68596e89e9a3d6fa8 (patch) | |
tree | 12d945fae6090b4ba046906a7f0f5474bbc480af /drivers | |
parent | 178e26d75212f5aba63116585ef8f67ca6854e85 (diff) | |
parent | 77436d6696127dcaa9049db47b000da7f2b8e85e (diff) | |
download | u-boot-fsl-qoriq-e365c43d6aa69b544a8f81d68596e89e9a3d6fa8.tar.xz |
Merge branch 'next' of git://git.denx.de/u-boot-ti into next
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/spi/davinci_spi.c | 195 |
1 files changed, 128 insertions, 67 deletions
diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c index 08f837b..4518ecb 100644 --- a/drivers/spi/davinci_spi.c +++ b/drivers/spi/davinci_spi.c @@ -66,7 +66,7 @@ void spi_free_slave(struct spi_slave *slave) int spi_claim_bus(struct spi_slave *slave) { struct davinci_spi_slave *ds = to_davinci_spi(slave); - unsigned int scalar, data1_reg_val = 0; + unsigned int scalar; /* Enable the SPI hardware */ writel(SPIGCR0_SPIRST_MASK, &ds->regs->gcr0); @@ -93,11 +93,6 @@ int spi_claim_bus(struct spi_slave *slave) writel(8 | (scalar << SPIFMT_PRESCALE_SHIFT) | (1 << SPIFMT_PHASE_SHIFT), &ds->regs->fmt0); - /* hold cs active at end of transfer until explicitly de-asserted */ - data1_reg_val = (1 << SPIDAT1_CSHOLD_SHIFT) | - (slave->cs << SPIDAT1_CSNR_SHIFT); - writel(data1_reg_val, &ds->regs->dat1); - /* * Including a minor delay. No science here. Should be good even with * no delay @@ -113,8 +108,7 @@ int spi_claim_bus(struct spi_slave *slave) writel(0, &ds->regs->lvl); /* enable SPI */ - writel((readl(&ds->regs->gcr1) | - SPIGCR1_SPIENA_MASK), &ds->regs->gcr1); + writel((readl(&ds->regs->gcr1) | SPIGCR1_SPIENA_MASK), &ds->regs->gcr1); return 0; } @@ -127,14 +121,125 @@ void spi_release_bus(struct spi_slave *slave) writel(SPIGCR0_SPIRST_MASK, &ds->regs->gcr0); } +/* + * This functions needs to act like a macro to avoid pipeline reloads in the + * loops below. Use always_inline. This gains us about 160KiB/s and the bloat + * appears to be zero bytes (da830). + */ +__attribute__((always_inline)) +static inline u32 davinci_spi_xfer_data(struct davinci_spi_slave *ds, u32 data) +{ + u32 buf_reg_val; + + /* send out data */ + writel(data, &ds->regs->dat1); + + /* wait for the data to clock in/out */ + while ((buf_reg_val = readl(&ds->regs->buf)) & SPIBUF_RXEMPTY_MASK) + ; + + return buf_reg_val; +} + +static int davinci_spi_read(struct spi_slave *slave, unsigned int len, + u8 *rxp, unsigned long flags) +{ + struct davinci_spi_slave *ds = to_davinci_spi(slave); + unsigned int data1_reg_val; + + /* enable CS hold, CS[n] and clear the data bits */ + data1_reg_val = ((1 << SPIDAT1_CSHOLD_SHIFT) | + (slave->cs << SPIDAT1_CSNR_SHIFT)); + + /* wait till TXFULL is deasserted */ + while (readl(&ds->regs->buf) & SPIBUF_TXFULL_MASK) + ; + + /* preload the TX buffer to avoid clock starvation */ + writel(data1_reg_val, &ds->regs->dat1); + + /* keep reading 1 byte until only 1 byte left */ + while ((len--) > 1) + *rxp++ = davinci_spi_xfer_data(ds, data1_reg_val); + + /* clear CS hold when we reach the end */ + if (flags & SPI_XFER_END) + data1_reg_val &= ~(1 << SPIDAT1_CSHOLD_SHIFT); + + /* read the last byte */ + *rxp = davinci_spi_xfer_data(ds, data1_reg_val); + + return 0; +} + +static int davinci_spi_write(struct spi_slave *slave, unsigned int len, + const u8 *txp, unsigned long flags) +{ + struct davinci_spi_slave *ds = to_davinci_spi(slave); + unsigned int data1_reg_val; + + /* enable CS hold and clear the data bits */ + data1_reg_val = ((1 << SPIDAT1_CSHOLD_SHIFT) | + (slave->cs << SPIDAT1_CSNR_SHIFT)); + + /* wait till TXFULL is deasserted */ + while (readl(&ds->regs->buf) & SPIBUF_TXFULL_MASK) + ; + + /* preload the TX buffer to avoid clock starvation */ + if (len > 2) { + writel(data1_reg_val | *txp++, &ds->regs->dat1); + len--; + } + + /* keep writing 1 byte until only 1 byte left */ + while ((len--) > 1) + davinci_spi_xfer_data(ds, data1_reg_val | *txp++); + + /* clear CS hold when we reach the end */ + if (flags & SPI_XFER_END) + data1_reg_val &= ~(1 << SPIDAT1_CSHOLD_SHIFT); + + /* write the last byte */ + davinci_spi_xfer_data(ds, data1_reg_val | *txp); + + return 0; +} + +#ifndef CONFIG_SPI_HALF_DUPLEX +static int davinci_spi_read_write(struct spi_slave *slave, unsigned int len, + u8 *rxp, const u8 *txp, unsigned long flags) +{ + struct davinci_spi_slave *ds = to_davinci_spi(slave); + unsigned int data1_reg_val; + + /* enable CS hold and clear the data bits */ + data1_reg_val = ((1 << SPIDAT1_CSHOLD_SHIFT) | + (slave->cs << SPIDAT1_CSNR_SHIFT)); + + /* wait till TXFULL is deasserted */ + while (readl(&ds->regs->buf) & SPIBUF_TXFULL_MASK) + ; + + /* keep reading and writing 1 byte until only 1 byte left */ + while ((len--) > 1) + *rxp++ = davinci_spi_xfer_data(ds, data1_reg_val | *txp++); + + /* clear CS hold when we reach the end */ + if (flags & SPI_XFER_END) + data1_reg_val &= ~(1 << SPIDAT1_CSHOLD_SHIFT); + + /* read and write the last byte */ + *rxp = davinci_spi_xfer_data(ds, data1_reg_val | *txp); + + return 0; +} +#endif + int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, void *din, unsigned long flags) { - struct davinci_spi_slave *ds = to_davinci_spi(slave); - unsigned int len, data1_reg_val = readl(&ds->regs->dat1); - unsigned int i_cnt = 0, o_cnt = 0, buf_reg_val; - const u8 *txp = dout; /* dout can be NULL for read operation */ - u8 *rxp = din; /* din can be NULL for write operation */ + unsigned int len; if (bitlen == 0) /* Finish any previously submitted transfers */ @@ -154,63 +259,19 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, len = bitlen / 8; - /* do an empty read to clear the current contents */ - readl(&ds->regs->buf); - - /* keep writing and reading 1 byte until done */ - while ((i_cnt < len) || (o_cnt < len)) { - /* read RX buffer and flags */ - buf_reg_val = readl(&ds->regs->buf); - - /* if data is available */ - if ((i_cnt < len) && - (buf_reg_val & SPIBUF_RXEMPTY_MASK) == 0) { - /* - * If there is no read buffer simply - * ignore the read character - */ - if (rxp) - *rxp++ = buf_reg_val & 0xFF; - /* increment read words count */ - i_cnt++; - } - - /* - * if the tx buffer is empty and there - * is still data to transmit - */ - if ((o_cnt < len) && - ((buf_reg_val & SPIBUF_TXFULL_MASK) == 0)) { - /* write the data */ - data1_reg_val &= ~0xFFFF; - if (txp) - data1_reg_val |= *txp++; - /* - * Write to DAT1 is required to keep - * the serial transfer going. - * We just terminate when we reach the end. - */ - if ((o_cnt == (len - 1)) && (flags & SPI_XFER_END)) { - /* clear CS hold */ - writel(data1_reg_val & - ~(1 << SPIDAT1_CSHOLD_SHIFT), - &ds->regs->dat1); - } else { - /* enable CS hold and write TX register */ - data1_reg_val |= ((1 << SPIDAT1_CSHOLD_SHIFT) | - (slave->cs << SPIDAT1_CSNR_SHIFT)); - writel(data1_reg_val, &ds->regs->dat1); - } - /* increment written words count */ - o_cnt++; - } - } - return 0; + if (!dout) + return davinci_spi_read(slave, len, din, flags); + else if (!din) + return davinci_spi_write(slave, len, dout, flags); +#ifndef CONFIG_SPI_HALF_DUPLEX + else + return davinci_spi_read_write(slave, len, din, dout, flags); +#endif out: if (flags & SPI_XFER_END) { - writel(data1_reg_val & - ~(1 << SPIDAT1_CSHOLD_SHIFT), &ds->regs->dat1); + u8 dummy = 0; + davinci_spi_write(slave, 1, &dummy, flags); } return 0; } |