diff options
author | Shengzhou Liu <Shengzhou.Liu@freescale.com> | 2013-09-13 06:46:02 (GMT) |
---|---|---|
committer | York Sun <yorksun@freescale.com> | 2013-10-16 23:15:17 (GMT) |
commit | ad89da0c33f8d9f5a4e28974ad594ff679a74e8c (patch) | |
tree | 532209db1eed47a8e509578e312175c97b0a92d9 /include/configs | |
parent | 5536aeb09b672e2541663fdc9370e2bc174dbae9 (diff) | |
download | u-boot-fsl-qoriq-ad89da0c33f8d9f5a4e28974ad594ff679a74e8c.tar.xz |
board/p1010rdb: add pin mux and sdhc support in any boot
Since pins multiplexing, SDHC shares signals with IFC, with this patch:
To enable SDHC in case of NOR/NAND/SPI boot
a) For temporary use case in runtime without reboot system
run 'mux sdhc' in u-boot to validate SDHC with invalidating IFC.
b) For long-term use case
set 'esdhc' in hwconfig and save it.
To enable IFC in case of SD boot
a) For temporary use case in runtime without reboot system
run 'mux ifc' in u-boot to validate IFC with invalidating SDHC.
b) For long-term use case
set 'ifc' in hwconfig and save it.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Diffstat (limited to 'include/configs')
-rw-r--r-- | include/configs/P1010RDB.h | 15 |
1 files changed, 2 insertions, 13 deletions
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index c058613..032c078 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -152,10 +152,7 @@ #define CONFIG_DDR_CLK_FREQ 66666666 /* DDRCLK on P1010 RDB */ #define CONFIG_SYS_CLK_FREQ 66666666 /* SYSCLK for P1010 RDB */ -#ifndef CONFIG_SDCARD #define CONFIG_MISC_INIT_R -#endif - #define CONFIG_HWCONFIG /* * These can be toggled for performance analysis, otherwise use default. @@ -256,10 +253,6 @@ extern unsigned long get_sdram_size(void); * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable */ -/* In case of SD card boot, IFC interface is not available because of muxing */ -#ifdef CONFIG_SDCARD -#define CONFIG_SYS_NO_FLASH -#else /* * IFC Definitions */ @@ -410,7 +403,6 @@ extern unsigned long get_sdram_size(void); FTIM2_GPCM_TCH(0x0) | \ FTIM2_GPCM_TWP(0x1f)) #define CONFIG_SYS_CS3_FTIM3 0x0 -#endif /* CONFIG_SDCARD */ #if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) #define CONFIG_SYS_RAMBOOT @@ -482,6 +474,8 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_FSL_I2C2_SPEED 400000 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 +#define I2C_PCA9557_ADDR1 0x18 +#define I2C_PCA9557_BUS_NUM 0 /* I2C EEPROM */ #undef CONFIG_ID_EEPROM @@ -567,12 +561,7 @@ extern unsigned long get_sdram_size(void); #define CONFIG_LBA48 #endif /* #ifdef CONFIG_FSL_SATA */ -/* SD interface will only be available in case of SD boot */ -#ifdef CONFIG_SDCARD #define CONFIG_MMC -#define CONFIG_DEF_HWCONFIG esdhc -#endif - #ifdef CONFIG_MMC #define CONFIG_CMD_MMC #define CONFIG_DOS_PARTITION |