diff options
author | Wolfgang Denk <wd@denx.de> | 2010-10-05 20:03:23 (GMT) |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2010-10-18 19:48:26 (GMT) |
commit | 059e77824695f4b8ef3b6e38308fa0168433a41d (patch) | |
tree | ec22c079b3ea6d448e42a266bf6861390a932088 /include | |
parent | b6e7bd9740f84d5a81302fb0f0c559823027ebcd (diff) | |
download | u-boot-fsl-qoriq-059e77824695f4b8ef3b6e38308fa0168433a41d.tar.xz |
logodl: remove code for yet another corpse
The logodl board has long been unmaintained and left broken.
As obviously nobody is interestedin that code any more, we may as well
remove it.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: August Hoeraendl <august.hoerandl@gmx.at>
Cc: Robert Schwebel <r.schwebel@pengutronix.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Diffstat (limited to 'include')
-rw-r--r-- | include/configs/logodl.h | 299 |
1 files changed, 0 insertions, 299 deletions
diff --git a/include/configs/logodl.h b/include/configs/logodl.h deleted file mode 100644 index 0535ee1..0000000 --- a/include/configs/logodl.h +++ /dev/null @@ -1,299 +0,0 @@ -/* - * (C) Copyright 2003 - * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de. - * - * Configuration for the Logotronic DL board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * include/configs/logodl.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_PXA250 1 /* This is an PXA250 CPU */ -#define CONFIG_GEALOG 1 /* on a Logotronic GEALOG SG board */ - -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - /* for timer/console/ethernet */ - -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_NO_DCACHE - -/* - * Hardware drivers - */ - -/* - * select serial console configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART 1 /* we use FFUART */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 19200 -#undef CONFIG_MISC_INIT_R /* FIXME: misc_init_r() missing */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_RUN - - -#define CONFIG_BOOTDELAY 3 -/* #define CONFIG_BOOTARGS "root=/dev/nfs ip=bootp console=ttyS0,19200" */ -#define CONFIG_BOOTARGS "console=ttyS0,19200" -#define CONFIG_ETHADDR FF:FF:FF:FF:FF:FF -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.1.56 -#define CONFIG_SERVERIP 192.168.1.2 -#define CONFIG_BOOTCOMMAND "bootm 0x40000" -#define CONFIG_SHOW_BOOT_PROGRESS - -#define CONFIG_CMDLINE_TAG 1 - -/* - * Miscellaneous configurable options - */ - -/* - * Size of malloc() pool; this lives below the uppermost 128 KiB which are - * used for the RAM copy of the uboot code - * - */ -#define CONFIG_SYS_MALLOC_LEN (256*1024) - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "uboot> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x08000000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0800ffff /* 64 KiB */ - -#define CONFIG_SYS_LOAD_ADDR 0x08000000 /* load kernel to this address */ - -#define CONFIG_SYS_HZ 1000 - /* RS: the oscillator is actually 3680130?? */ - -#define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */ - /* 0101000001 */ - /* ^^^^^ Memory Speed 99.53 MHz */ - /* ^^ Run Mode Speed = 2x Mem Speed */ - /* ^^ Turbo Mode Sp. = 1x Run M. Sp. */ - -#define CONFIG_SYS_MONITOR_LEN 0x20000 /* 128 KiB */ - - /* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/* - * SMSC91C111 Network Card - */ -#if 0 -#define CONFIG_NET_MULTI -#define CONFIG_SMC91111 1 -#define CONFIG_SMC91111_BASE 0x10000000 /* chip select 4 */ -#undef CONFIG_SMC_USE_32_BIT /* 16 bit bus access */ -#undef CONFIG_SMC_91111_EXT_PHY /* we use internal phy */ -#undef CONFIG_SHOW_ACTIVITY -#define CONFIG_NET_RETRY_COUNT 10 /* # of retries */ -#endif - -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of RAM */ -#define PHYS_SDRAM_1 0x08000000 /* SRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE (4*1024*1024) /* 4 MB */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_2 0x01000000 /* Flash Bank #2 */ -#define PHYS_FLASH_SIZE (32*1024*1024) /* 32 MB */ - -#define CONFIG_SYS_DRAM_BASE PHYS_SDRAM_1 /* RAM starts here */ -#define CONFIG_SYS_DRAM_SIZE PHYS_SDRAM_1_SIZE - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - - -/* - * GPIO settings - * - * GP?? == FOOBAR is 0/1 - */ - -#define _BIT0 0x00000001 -#define _BIT1 0x00000002 -#define _BIT2 0x00000004 -#define _BIT3 0x00000008 - -#define _BIT4 0x00000010 -#define _BIT5 0x00000020 -#define _BIT6 0x00000040 -#define _BIT7 0x00000080 - -#define _BIT8 0x00000100 -#define _BIT9 0x00000200 -#define _BIT10 0x00000400 -#define _BIT11 0x00000800 - -#define _BIT12 0x00001000 -#define _BIT13 0x00002000 -#define _BIT14 0x00004000 -#define _BIT15 0x00008000 - -#define _BIT16 0x00010000 -#define _BIT17 0x00020000 -#define _BIT18 0x00040000 -#define _BIT19 0x00080000 - -#define _BIT20 0x00100000 -#define _BIT21 0x00200000 -#define _BIT22 0x00400000 -#define _BIT23 0x00800000 - -#define _BIT24 0x01000000 -#define _BIT25 0x02000000 -#define _BIT26 0x04000000 -#define _BIT27 0x08000000 - -#define _BIT28 0x10000000 -#define _BIT29 0x20000000 -#define _BIT30 0x40000000 -#define _BIT31 0x80000000 - - -#define CONFIG_SYS_LED_A_BIT (_BIT18) -#define CONFIG_SYS_LED_A_SR GPSR0 -#define CONFIG_SYS_LED_A_CR GPCR0 - -#define CONFIG_SYS_LED_B_BIT (_BIT16) -#define CONFIG_SYS_LED_B_SR GPSR1 -#define CONFIG_SYS_LED_B_CR GPCR1 - - -/* LED A: off, LED B: off */ -#define CONFIG_SYS_GPSR0_VAL (_BIT1+_BIT6+_BIT8+_BIT9+_BIT11+_BIT15+_BIT16+_BIT18) -#define CONFIG_SYS_GPSR1_VAL (_BIT0+_BIT1+_BIT16+_BIT24+_BIT25 +_BIT7+_BIT8+_BIT9+_BIT11+_BIT13) -#define CONFIG_SYS_GPSR2_VAL (_BIT14+_BIT15+_BIT16) - -#define CONFIG_SYS_GPCR0_VAL 0x00000000 -#define CONFIG_SYS_GPCR1_VAL 0x00000000 -#define CONFIG_SYS_GPCR2_VAL 0x00000000 - -#define CONFIG_SYS_GPDR0_VAL (_BIT1+_BIT6+_BIT8+_BIT9+_BIT11+_BIT15+_BIT16+_BIT17+_BIT18) -#define CONFIG_SYS_GPDR1_VAL (_BIT0+_BIT1+_BIT16+_BIT24+_BIT25 +_BIT7+_BIT8+_BIT9+_BIT11+_BIT13) -#define CONFIG_SYS_GPDR2_VAL (_BIT14+_BIT15+_BIT16) - -#define CONFIG_SYS_GAFR0_L_VAL (_BIT22+_BIT24+_BIT31) -#define CONFIG_SYS_GAFR0_U_VAL (_BIT15+_BIT17+_BIT19+\ - _BIT20+_BIT22+_BIT24+_BIT26+_BIT29+_BIT31) -#define CONFIG_SYS_GAFR1_L_VAL (_BIT3+_BIT4+_BIT6+_BIT8+_BIT10+_BIT12+_BIT15+_BIT17+_BIT19+\ - _BIT20+_BIT23+_BIT24+_BIT27+_BIT28+_BIT31) -#define CONFIG_SYS_GAFR1_U_VAL (_BIT21+_BIT23+_BIT25+_BIT27+_BIT29+_BIT31) -#define CONFIG_SYS_GAFR2_L_VAL (_BIT1+_BIT3+_BIT5+_BIT7+_BIT9+_BIT11+_BIT13+_BIT15+_BIT17+\ - _BIT19+_BIT21+_BIT23+_BIT25+_BIT27+_BIT29+_BIT31) -#define CONFIG_SYS_GAFR2_U_VAL (_BIT1) - -#define CONFIG_SYS_PSSR_VAL (0x20) - -/* - * Memory settings - */ -#define CONFIG_SYS_MSC0_VAL 0x123c2980 -#define CONFIG_SYS_MSC1_VAL 0x123c2661 -#define CONFIG_SYS_MSC2_VAL 0x7ff87ff8 - - -/* no sdram/pcmcia here */ -#define CONFIG_SYS_MDCNFG_VAL 0x00000000 -#define CONFIG_SYS_MDREFR_VAL 0x00000000 -#define CONFIG_SYS_MDREFR_VAL_100 0x00000000 -#define CONFIG_SYS_MDMRS_VAL 0x00000000 - -/* only SRAM */ -#define SXCNFG_SETTINGS 0x00000000 - -/* - * PCMCIA and CF Interfaces - */ - -#define CONFIG_SYS_MECR_VAL 0x00000000 -#define CONFIG_SYS_MCMEM0_VAL 0x00010504 -#define CONFIG_SYS_MCMEM1_VAL 0x00010504 -#define CONFIG_SYS_MCATT0_VAL 0x00010504 -#define CONFIG_SYS_MCATT1_VAL 0x00010504 -#define CONFIG_SYS_MCIO0_VAL 0x00004715 -#define CONFIG_SYS_MCIO1_VAL 0x00004715 - - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -/* FIXME */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x1C000) /* Addr of Environment Sector */ -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - -#endif /* __CONFIG_H */ |