diff options
author | Stefan Roese <sr@denx.de> | 2005-08-01 14:41:48 (GMT) |
---|---|---|
committer | Stefan Roese <stefan@debian.(none)> | 2005-08-01 14:41:48 (GMT) |
commit | c157d8e219694f5c3dea1ed3826668bdc67ca093 (patch) | |
tree | 0db7954a0b50e4b5f2a5da2e007ea82a965c6663 /include | |
parent | 15f36a5efd31fe608b43dc197ebbd80d3cecbe44 (diff) | |
download | u-boot-fsl-qoriq-c157d8e219694f5c3dea1ed3826668bdc67ca093.tar.xz |
Add support for AMCC PPC440EP/GR eval boards Yosemite and Yellowstone.
Patch by Steven Blakeslee, 27 Jul 2005
Diffstat (limited to 'include')
-rw-r--r-- | include/405gp_enet.h | 10 | ||||
-rw-r--r-- | include/440_i2c.h | 4 | ||||
-rw-r--r-- | include/440gx_enet.h | 8 | ||||
-rw-r--r-- | include/asm-ppc/processor.h | 2 | ||||
-rw-r--r-- | include/asm-ppc/u-boot.h | 7 | ||||
-rw-r--r-- | include/configs/yellowstone.h | 298 | ||||
-rw-r--r-- | include/configs/yosemite.h | 312 | ||||
-rw-r--r-- | include/pci.h | 15 | ||||
-rw-r--r-- | include/ppc440.h | 219 | ||||
-rw-r--r-- | include/usb_defs.h | 14 |
10 files changed, 881 insertions, 8 deletions
diff --git a/include/405gp_enet.h b/include/405gp_enet.h index 88ac4add..233ea11 100644 --- a/include/405gp_enet.h +++ b/include/405gp_enet.h @@ -67,7 +67,11 @@ struct arp_entry { /*Register addresses */ #if defined(CONFIG_440) +#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR) +#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0D00) +#else #define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0780) +#endif #define ZMII_FER (ZMII_BASE) #define ZMII_SSR (ZMII_BASE + 4) #define ZMII_SMIISR (ZMII_BASE + 8) @@ -77,7 +81,11 @@ struct arp_entry { #endif /* CONFIG_440 */ #if defined(CONFIG_440) -#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0800) +#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR) +#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0E00) +#else +#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0800) +#endif #else #define EMAC_BASE 0xEF600800 #endif diff --git a/include/440_i2c.h b/include/440_i2c.h index b0ac592..01a5bac 100644 --- a/include/440_i2c.h +++ b/include/440_i2c.h @@ -1,7 +1,11 @@ #ifndef _440_i2c_h_ #define _440_i2c_h_ +#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR) +#define I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000700) +#else #define I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000400) +#endif /*CONFIG_440_EP CONFIG_440_GR*/ #define I2C_REGISTERS_BASE_ADDRESS I2C_BASE_ADDR #define IIC_MDBUF (I2C_REGISTERS_BASE_ADDRESS+IICMDBUF) diff --git a/include/440gx_enet.h b/include/440gx_enet.h index 8caf969..022c5d8 100644 --- a/include/440gx_enet.h +++ b/include/440gx_enet.h @@ -140,7 +140,11 @@ typedef struct emac_440gx_hw_st { /*ZMII Bridge Register addresses */ +#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR) +#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0D00) +#else #define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0780) +#endif #define ZMII_FER (ZMII_BASE) #define ZMII_SSR (ZMII_BASE + 4) #define ZMII_SMIISR (ZMII_BASE + 8) @@ -272,7 +276,11 @@ typedef struct emac_440gx_hw_st { /* Ethernet MAC Regsiter Addresses */ +#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR) +#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0E00) +#else #define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0800) +#endif #define EMAC_M0 (EMAC_BASE) #define EMAC_M1 (EMAC_BASE + 4) diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h index 71fadbc..806085e 100644 --- a/include/asm-ppc/processor.h +++ b/include/asm-ppc/processor.h @@ -716,6 +716,8 @@ #define PVR_405GPR_RB 0x50910951 #define PVR_440GP_RB 0x40120440 #define PVR_440GP_RC 0x40120481 +#define PVR_440EP_RA 0x42221850 +#define PVR_440EP_RB 0x422218D3 #define PVR_440GX_RA 0x51B21850 #define PVR_440GX_RB 0x51B21851 #define PVR_440GX_RC 0x51B21892 diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h index f8282d4..a759315 100644 --- a/include/asm-ppc/u-boot.h +++ b/include/asm-ppc/u-boot.h @@ -98,13 +98,18 @@ typedef struct bd_info { unsigned char bi_enet3addr[6]; #endif -#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined (CONFIG_440_GX) +#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined (CONFIG_440_GX) || \ + defined(CONFIG_440_EP) || defined(CONFIG_440_GR) unsigned int bi_opbfreq; /* OPB clock in Hz */ int bi_iic_fast[2]; /* Use fast i2c mode */ #endif #if defined(CONFIG_NX823) unsigned char bi_sernum[8]; #endif +#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR) + int bi_phynum[2]; /* Determines phy mapping */ + int bi_phymode[2]; /* Determines phy mode */ +#endif #if defined(CONFIG_440_GX) int bi_phynum[4]; /* Determines phy mapping */ int bi_phymode[4]; /* Determines phy mode */ diff --git a/include/configs/yellowstone.h b/include/configs/yellowstone.h new file mode 100644 index 0000000..90418e0 --- /dev/null +++ b/include/configs/yellowstone.h @@ -0,0 +1,298 @@ +/* + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * yellowstone.h - configuration for YELLOWSTONE board + ***********************************************************************/ +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_YELLOWSTONE 1 /* Board is BAMBOO */ +#define CONFIG_440_GR 1 /* Specific PPC440GR support */ + +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#undef CFG_DRAM_TEST /* disable - takes long time! */ +#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */ + +/*----------------------------------------------------------------------- + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + *----------------------------------------------------------------------*/ +#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ +#define CFG_FLASH_BASE 0xf0000000 /* start of FLASH */ +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ +#define CFG_PCI_MEMBASE 0xa0000000 /* mapped pci memory */ +#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000 +#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000 +#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000 + + +/*Don't change either of these*/ +#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */ +#define CFG_PCI_BASE 0xe0000000 /* internal PCI regs */ +/*Don't change either of these*/ + +#define CFG_USB_DEVICE 0x50000000 +#define CFG_NVRAM_BASE_ADDR 0x80000000 +#define CFG_BCSR_BASE (CFG_NVRAM_BASE_ADDR | 0x2000) + +/*----------------------------------------------------------------------- + * Initial RAM & stack pointer (placed in SDRAM) + *----------------------------------------------------------------------*/ +#define CFG_INIT_RAM_ADDR 0xf0000000 /* DCache */ +#define CFG_INIT_RAM_END 0x2000 +#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/ +#define CFG_KBYTES_SDRAM ( 128 * 1024) /* 128MB */ +#define CFG_SDRAM_BANKS (2) +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CFG_EXT_SERIAL_CLOCK 11059200 /* use external 11.059MHz clk */ +#define CONFIG_BAUDRATE 9600 +#define CONFIG_SERIAL_MULTI 1 +/*define this if you want console on UART1*/ +#undef CONFIG_UART1_CONSOLE + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +/*----------------------------------------------------------------------- + * NVRAM/RTC + * + * NOTE: The RTC registers are located at 0x7FFF0 - 0x7FFFF + * The DS1558 code assumes this condition + * + *----------------------------------------------------------------------*/ +#define CFG_NVRAM_SIZE (0x2000 - 0x10) /* NVRAM size(8k)- RTC regs */ +#define CONFIG_RTC_DS1556 1 /* DS1556 RTC */ + +/*----------------------------------------------------------------------- + * FLASH related + *----------------------------------------------------------------------*/ +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 256 /* sectors per device */ + +#undef CFG_FLASH_CHECKSUM +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 120000 /* Timeout for Flash Write (in ms) */ + +/*----------------------------------------------------------------------- + * DDR SDRAM + *----------------------------------------------------------------------*/ +#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */ + +/*----------------------------------------------------------------------- + * I2C + *----------------------------------------------------------------------*/ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + + +/*----------------------------------------------------------------------- + * Environment + *----------------------------------------------------------------------*/ +#undef CFG_ENV_IS_IN_NVRAM /*No NVRAM on board*/ +#undef CFG_ENV_IS_IN_FLASH /* ... not in flash */ +#define CFG_ENV_IS_IN_EEPROM 1 + +/* Define to allow the user to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CFG_I2C_MULTI_EEPROMS +#define CFG_ENV_SIZE 0x200 /* Size of Environment vars */ +#define CFG_ENV_OFFSET 0x0 +#define CFG_I2C_EEPROM_ADDR (0xa8>>1) +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_ENABLE +#define CFG_EEPROM_PAGE_WRITE_BITS 3 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 + +#define CONFIG_BOOTCOMMAND "bootm 0xfe000000" /* autoboot command */ +#define CONFIG_BOOTDELAY 3 /* disable autoboot */ + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_NET_MULTI 1 /* required for netconsole */ +#define CONFIG_PHY1_ADDR 3 +#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ +#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */ +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 10.0.4.251 +#define CONFIG_ETHADDR 00:10:EC:00:12:34 +#define CONFIG_ETH1ADDR 00:10:EC:00:12:35 + +#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ +#define CONFIG_SERVERIP 10.0.4.115 + +/* Partitions */ +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION + +#ifdef CONFIG_440_EP +/* USB */ +#define CONFIG_USB_OHCI +#define CONFIG_USB_STORAGE + +/*Comment this out to enable USB 1.1 device*/ +#define USB_2_0_DEVICE +#endif /*CONFIG_440_EP*/ + +#ifdef DEBUG +#define CONFIG_PANIC_HANG +#else +#define CONFIG_HW_WATCHDOG /* watchdog */ +#endif + +#ifdef CONFIG_440_EP + /* Need to define POST */ +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \ + CFG_CMD_DATE | \ + CFG_CMD_DHCP | \ + CFG_CMD_DIAG | \ + CFG_CMD_ECHO | \ + CFG_CMD_EEPROM | \ + CFG_CMD_ELF | \ + /* CFG_CMD_EXT2 |*/ \ + /* CFG_CMD_FAT |*/ \ + CFG_CMD_I2C | \ + /* CFG_CMD_IDE |*/ \ + CFG_CMD_IRQ | \ + /* CFG_CMD_KGDB |*/ \ + CFG_CMD_MII | \ + CFG_CMD_PCI | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SDRAM | \ + CFG_CMD_FLASH | \ + /* CFG_CMD_SPI |*/ \ + CFG_CMD_USB | \ + 0 ) & ~CFG_CMD_IMLS) +#else +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \ + CFG_CMD_DATE | \ + CFG_CMD_DHCP | \ + CFG_CMD_DIAG | \ + CFG_CMD_ECHO | \ + CFG_CMD_EEPROM | \ + CFG_CMD_ELF | \ + /* CFG_CMD_EXT2 |*/ \ + /* CFG_CMD_FAT |*/ \ + CFG_CMD_I2C | \ + /* CFG_CMD_IDE |*/ \ + CFG_CMD_IRQ | \ + /* CFG_CMD_KGDB |*/ \ + CFG_CMD_MII | \ + CFG_CMD_PCI | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SDRAM | \ + CFG_CMD_FLASH | \ + /* CFG_CMD_SPI |*/ \ + 0 ) & ~CFG_CMD_IMLS) +#endif + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ +#define CONFIG_LYNXKDI 1 /* support kdi files */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------- + */ +/* General PCI */ +#define CONFIG_PCI /* include pci support */ +#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */ + +/* Board-specific PCI */ +#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ +#define CFG_PCI_TARGET_INIT +#define CFG_PCI_MASTER_INIT + +#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */ +#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */ +#define CFG_CACHELINE_SIZE 32 /* ... */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif +#endif /* __CONFIG_H */ diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h new file mode 100644 index 0000000..5f88306 --- /dev/null +++ b/include/configs/yosemite.h @@ -0,0 +1,312 @@ +/* + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * yosemite.h - configuration for YOSEMITE board + ***********************************************************************/ +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_YOSEMITE 1 /* Board is BAMBOO */ +#define CONFIG_440_EP 1 /* Specific PPC440EP support */ + +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#undef CFG_DRAM_TEST /* disable - takes long time! */ +#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */ + +/*----------------------------------------------------------------------- + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + *----------------------------------------------------------------------*/ +#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ +#define CFG_FLASH_BASE 0xfe000000 /* start of FLASH */ +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ +#define CFG_PCI_MEMBASE 0xa0000000 /* mapped pci memory */ +#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000 +#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000 +#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000 + + +/*Don't change either of these*/ +#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */ +#define CFG_PCI_BASE 0xe0000000 /* internal PCI regs */ +/*Don't change either of these*/ + +#define CFG_USB_DEVICE 0x50000000 +#define CFG_NVRAM_BASE_ADDR 0x80000000 +#define CFG_BCSR_BASE (CFG_NVRAM_BASE_ADDR | 0x2000) + +/*----------------------------------------------------------------------- + * Initial RAM & stack pointer (placed in SDRAM) + *----------------------------------------------------------------------*/ +#define CFG_INIT_RAM_ADDR 0xf0000000 /* DCache */ +#define CFG_INIT_RAM_END 0x2000 +#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/ +#define CFG_KBYTES_SDRAM ( 128 * 1024) /* 128MB */ +#define CFG_SDRAM_BANKS (2) +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CFG_EXT_SERIAL_CLOCK 11059200 /* use external 11.059MHz clk */ +#define CONFIG_BAUDRATE 9600 +#define CONFIG_SERIAL_MULTI 1 +/*define this if you want console on UART1*/ +#undef CONFIG_UART1_CONSOLE + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +/*----------------------------------------------------------------------- + * NVRAM/RTC + * + * NOTE: The RTC registers are located at 0x7FFF0 - 0x7FFFF + * The DS1558 code assumes this condition + * + *----------------------------------------------------------------------*/ +#define CFG_NVRAM_SIZE (0x2000 - 0x10) /* NVRAM size(8k)- RTC regs */ +#define CONFIG_RTC_DS1556 1 /* DS1556 RTC */ + +/*----------------------------------------------------------------------- + * FLASH related + *----------------------------------------------------------------------*/ +#if 1 /* test-only */ +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 256 /* sectors per device */ + +#undef CFG_FLASH_CHECKSUM +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 120000 /* Timeout for Flash Write (in ms) */ +#else +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CFG_FLASH_CFI_AMD_RESET 1 /* AMD RESET for STM 29W320DB! */ + +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#endif + +/*----------------------------------------------------------------------- + * DDR SDRAM + *----------------------------------------------------------------------*/ +#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */ + +/*----------------------------------------------------------------------- + * I2C + *----------------------------------------------------------------------*/ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + + +/*----------------------------------------------------------------------- + * Environment + *----------------------------------------------------------------------*/ +#undef CFG_ENV_IS_IN_NVRAM /*No NVRAM on board*/ +#undef CFG_ENV_IS_IN_FLASH /* ... not in flash */ +#define CFG_ENV_IS_IN_EEPROM 1 + +/* Define to allow the user to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CFG_I2C_MULTI_EEPROMS +#define CFG_ENV_SIZE 0x200 /* Size of Environment vars */ +#define CFG_ENV_OFFSET 0x0 +#define CFG_I2C_EEPROM_ADDR (0xa8>>1) +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_ENABLE +#define CFG_EEPROM_PAGE_WRITE_BITS 3 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 + +#define CONFIG_BOOTCOMMAND "bootm 0xfe000000" /* autoboot command */ +#define CONFIG_BOOTDELAY 3 /* disable autoboot */ + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_NET_MULTI 1 /* required for netconsole */ +#define CONFIG_PHY1_ADDR 3 +#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ +#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */ +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 10.0.4.251 +#define CONFIG_ETHADDR 00:10:EC:00:12:34 +#define CONFIG_ETH1ADDR 00:10:EC:00:12:35 + +#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ +#define CONFIG_SERVERIP 10.0.4.115 + +/* Partitions */ +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION + +#ifdef CONFIG_440_EP +/* USB */ +#define CONFIG_USB_OHCI +#define CONFIG_USB_STORAGE + +/*Comment this out to enable USB 1.1 device*/ +#define USB_2_0_DEVICE +#endif /*CONFIG_440_EP*/ + +#ifdef DEBUG +#define CONFIG_PANIC_HANG +#else +#define CONFIG_HW_WATCHDOG /* watchdog */ +#endif + +#ifdef CONFIG_440_EP + /* Need to define POST */ +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \ + CFG_CMD_DATE | \ + CFG_CMD_DHCP | \ + CFG_CMD_DIAG | \ + CFG_CMD_ECHO | \ + CFG_CMD_EEPROM | \ + CFG_CMD_ELF | \ + /* CFG_CMD_EXT2 |*/ \ + /* CFG_CMD_FAT |*/ \ + CFG_CMD_I2C | \ + /* CFG_CMD_IDE |*/ \ + CFG_CMD_IRQ | \ + /* CFG_CMD_KGDB |*/ \ + CFG_CMD_MII | \ + CFG_CMD_PCI | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SDRAM | \ + CFG_CMD_FLASH | \ + /* CFG_CMD_SPI |*/ \ + CFG_CMD_USB | \ + 0 ) & ~CFG_CMD_IMLS) +#else +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \ + CFG_CMD_DATE | \ + CFG_CMD_DHCP | \ + CFG_CMD_DIAG | \ + CFG_CMD_ECHO | \ + CFG_CMD_EEPROM | \ + CFG_CMD_ELF | \ + /* CFG_CMD_EXT2 |*/ \ + /* CFG_CMD_FAT |*/ \ + CFG_CMD_I2C | \ + /* CFG_CMD_IDE |*/ \ + CFG_CMD_IRQ | \ + /* CFG_CMD_KGDB |*/ \ + CFG_CMD_MII | \ + CFG_CMD_PCI | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SDRAM | \ + CFG_CMD_FLASH | \ + /* CFG_CMD_SPI |*/ \ + 0 ) & ~CFG_CMD_IMLS) +#endif + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ +#define CONFIG_LYNXKDI 1 /* support kdi files */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------- + */ +/* General PCI */ +#define CONFIG_PCI /* include pci support */ +#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */ + +/* Board-specific PCI */ +#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ +#define CFG_PCI_TARGET_INIT +#define CFG_PCI_MASTER_INIT + +#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */ +#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */ +#define CFG_CACHELINE_SIZE 32 /* ... */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif +#endif /* __CONFIG_H */ diff --git a/include/pci.h b/include/pci.h index 458be23..8f19997 100644 --- a/include/pci.h +++ b/include/pci.h @@ -160,6 +160,21 @@ #define PCI_BRIDGE_CTL_BUS_RESET 0x40 /* Secondary bus reset */ #define PCI_BRIDGE_CTL_FAST_BACK 0x80 /* Fast Back2Back enabled on secondary interface */ +/* From 440ep */ +#define PCI_ERREN 0x48 /* Error Enable */ +#define PCI_ERRSTS 0x49 /* Error Status */ +#define PCI_BRDGOPT1 0x4A /* PCI Bridge Options 1 */ +#define PCI_PLBSESR0 0x4C /* PCI PLB Slave Error Syndrome 0 */ +#define PCI_PLBSESR1 0x50 /* PCI PLB Slave Error Syndrome 1 */ +#define PCI_PLBSEAR 0x54 /* PCI PLB Slave Error Address */ +#define PCI_CAPID 0x58 /* Capability Identifier */ +#define PCI_NEXTITEMPTR 0x59 /* Next Item Pointer */ +#define PCI_PMC 0x5A /* Power Management Capabilities */ +#define PCI_PMCSR 0x5C /* Power Management Control Status */ +#define PCI_PMCSRBSE 0x5E /* PMCSR PCI to PCI Bridge Support Extensions */ +#define PCI_BRDGOPT2 0x60 /* PCI Bridge Options 2 */ +#define PCI_PMSCRR 0x64 /* Power Management State Change Request Re. */ + /* Header type 2 (CardBus bridges) */ #define PCI_CB_CAPABILITY_LIST 0x14 /* 0x15 reserved */ diff --git a/include/ppc440.h b/include/ppc440.h index acd4572..3e9034f 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -78,7 +78,7 @@ #define ivor13 0x19d /* interrupt vector offset register 13 */ #define ivor14 0x19e /* interrupt vector offset register 14 */ #define ivor15 0x19f /* interrupt vector offset register 15 */ -#if defined(CONFIG_440_GX) +#if defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR) #define mcsrr0 0x23a /* machine check save/restore register 0 */ #define mcsrr1 0x23b /* mahcine check save/restore register 1 */ #define mcsr 0x23c /* machine check status register */ @@ -108,6 +108,7 @@ #define icdbtrh 0x39f /* instruction cache debug tag register high */ #define mmucr 0x3b2 /* mmu control register */ #define ccr0 0x3b3 /* core configuration register 0 */ +#define ccr1 0x378 /* core configuration for 440x5 only */ #define icdbdr 0x3d3 /* instruction cache debug data register */ #define dbdr 0x3f3 /* debug data register */ @@ -131,6 +132,7 @@ #define clk_opbd 0x00c0 #define clk_perd 0x00e0 #define clk_mald 0x0100 +#define clk_spcid 0x0120 #define clk_icfg 0x0140 /* 440gx sdr register definations */ @@ -149,19 +151,24 @@ #define sdr_ebc 0x0100 #define sdr_uart0 0x0120 /* UART0 Config */ #define sdr_uart1 0x0121 /* UART1 Config */ +#define sdr_uart2 0x0122 /* UART2 Config */ +#define sdr_uart3 0x0123 /* UART3 Config */ #define sdr_cp440 0x0180 #define sdr_xcr 0x01c0 #define sdr_xpllc 0x01c1 #define sdr_xplld 0x01c2 #define sdr_srst 0x0200 #define sdr_slpipe 0x0220 -#define sdr_amp 0x0240 +#define sdr_amp0 0x0240 /* Override PLB4 prioritiy for up to 8 masters */ +#define sdr_amp1 0x0241 /* Override PLB3 prioritiy for up to 8 masters */ #define sdr_mirq0 0x0260 #define sdr_mirq1 0x0261 #define sdr_maltbl 0x0280 #define sdr_malrbl 0x02a0 #define sdr_maltbs 0x02c0 #define sdr_malrbs 0x02e0 +#define sdr_pci0 0x0300 +#define sdr_usb0 0x0320 #define sdr_cust0 0x4000 #define sdr_sdstp2 0x4001 #define sdr_cust1 0x4002 @@ -234,6 +241,98 @@ #define xbcfg 0x23 /* external bus configuration reg */ #define xbcid 0x23 /* external bus core id reg */ +#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR) + +/* PLB4 to PLB3 Bridge OUT */ +#define P4P3_DCR_BASE 0x020 +#define p4p3_esr0_read (P4P3_DCR_BASE+0x0) +#define p4p3_esr0_write (P4P3_DCR_BASE+0x1) +#define p4p3_eadr (P4P3_DCR_BASE+0x2) +#define p4p3_euadr (P4P3_DCR_BASE+0x3) +#define p4p3_esr1_read (P4P3_DCR_BASE+0x4) +#define p4p3_esr1_write (P4P3_DCR_BASE+0x5) +#define p4p3_confg (P4P3_DCR_BASE+0x6) +#define p4p3_pic (P4P3_DCR_BASE+0x7) +#define p4p3_peir (P4P3_DCR_BASE+0x8) +#define p4p3_rev (P4P3_DCR_BASE+0xA) + +/* PLB3 to PLB4 Bridge IN */ +#define P3P4_DCR_BASE 0x030 +#define p3p4_esr0_read (P3P4_DCR_BASE+0x0) +#define p3p4_esr0_write (P3P4_DCR_BASE+0x1) +#define p3p4_eadr (P3P4_DCR_BASE+0x2) +#define p3p4_euadr (P3P4_DCR_BASE+0x3) +#define p3p4_esr1_read (P3P4_DCR_BASE+0x4) +#define p3p4_esr1_write (P3P4_DCR_BASE+0x5) +#define p3p4_confg (P3P4_DCR_BASE+0x6) +#define p3p4_pic (P3P4_DCR_BASE+0x7) +#define p3p4_peir (P3P4_DCR_BASE+0x8) +#define p3p4_rev (P3P4_DCR_BASE+0xA) + +/* PLB3 Arbiter */ +#define PLB3_DCR_BASE 0x070 +#define plb3_revid (PLB3_DCR_BASE+0x2) +#define plb3_besr (PLB3_DCR_BASE+0x3) +#define plb3_bear (PLB3_DCR_BASE+0x6) +#define plb3_acr (PLB3_DCR_BASE+0x7) + +/* PLB4 Arbiter - PowerPC440EP Pass1 */ +#define PLB4_DCR_BASE 0x080 +#define plb4_revid (PLB4_DCR_BASE+0x2) +#define plb4_acr (PLB4_DCR_BASE+0x3) +#define plb4_besr (PLB4_DCR_BASE+0x4) +#define plb4_bearl (PLB4_DCR_BASE+0x6) +#define plb4_bearh (PLB4_DCR_BASE+0x7) + +/* Nebula PLB4 Arbiter - PowerPC440EP */ +#define PLB_ARBITER_BASE 0x80 + +#define plb0_revid (PLB_ARBITER_BASE+ 0x00) +#define plb0_acr (PLB_ARBITER_BASE+ 0x01) +#define plb0_acr_ppm_mask 0xF0000000 +#define plb0_acr_ppm_fixed 0x00000000 +#define plb0_acr_ppm_fair 0xD0000000 +#define plb0_acr_hbu_mask 0x08000000 +#define plb0_acr_hbu_disabled 0x00000000 +#define plb0_acr_hbu_enabled 0x08000000 +#define plb0_acr_rdp_mask 0x06000000 +#define plb0_acr_rdp_disabled 0x00000000 +#define plb0_acr_rdp_2deep 0x02000000 +#define plb0_acr_rdp_3deep 0x04000000 +#define plb0_acr_rdp_4deep 0x06000000 +#define plb0_acr_wrp_mask 0x01000000 +#define plb0_acr_wrp_disabled 0x00000000 +#define plb0_acr_wrp_2deep 0x01000000 + +#define plb0_besrl (PLB_ARBITER_BASE+ 0x02) +#define plb0_besrh (PLB_ARBITER_BASE+ 0x03) +#define plb0_bearl (PLB_ARBITER_BASE+ 0x04) +#define plb0_bearh (PLB_ARBITER_BASE+ 0x05) +#define plb0_ccr (PLB_ARBITER_BASE+ 0x08) + +#define plb1_acr (PLB_ARBITER_BASE+ 0x09) +#define plb1_acr_ppm_mask 0xF0000000 +#define plb1_acr_ppm_fixed 0x00000000 +#define plb1_acr_ppm_fair 0xD0000000 +#define plb1_acr_hbu_mask 0x08000000 +#define plb1_acr_hbu_disabled 0x00000000 +#define plb1_acr_hbu_enabled 0x08000000 +#define plb1_acr_rdp_mask 0x06000000 +#define plb1_acr_rdp_disabled 0x00000000 +#define plb1_acr_rdp_2deep 0x02000000 +#define plb1_acr_rdp_3deep 0x04000000 +#define plb1_acr_rdp_4deep 0x06000000 +#define plb1_acr_wrp_mask 0x01000000 +#define plb1_acr_wrp_disabled 0x00000000 +#define plb1_acr_wrp_2deep 0x01000000 + +#define plb1_besrl (PLB_ARBITER_BASE+ 0x0A) +#define plb1_besrh (PLB_ARBITER_BASE+ 0x0B) +#define plb1_bearl (PLB_ARBITER_BASE+ 0x0C) +#define plb1_bearh (PLB_ARBITER_BASE+ 0x0D) + +#else + /*----------------------------------------------------------------------------- | Internal SRAM +----------------------------------------------------------------------------*/ @@ -265,6 +364,7 @@ #define l2_cache_snp1 (L2_CACHE_BASE+0x07) /* L2 Cache Snoop reg 1 */ #endif /* CONFIG_440_GX */ +#endif /* !CONFIG_440_EP !CONFIG_440_GR*/ /*----------------------------------------------------------------------------- | On-Chip Buses @@ -417,10 +517,8 @@ #define malrxbattr (MAL_DCR_BASE+0x15) /* RX descriptor base addr reg */ #define maltxctp0r (MAL_DCR_BASE+0x20) /* TX 0 Channel table pointer reg */ #define maltxctp1r (MAL_DCR_BASE+0x21) /* TX 1 Channel table pointer reg */ -#if defined(CONFIG_440_GX) #define maltxctp2r (MAL_DCR_BASE+0x22) /* TX 2 Channel table pointer reg */ #define maltxctp3r (MAL_DCR_BASE+0x23) /* TX 3 Channel table pointer reg */ -#endif /* CONFIG_440_GX */ #define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table pointer reg */ #define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table pointer reg */ #if defined(CONFIG_440_GX) @@ -893,6 +991,23 @@ #define SDR0_MFR_ECS_MASK 0x10000000 #define SDR0_MFR_ECS_INTERNAL 0x10000000 +#define SDR0_MFR_ETH0_CLK_SEL 0x08000000 /* Ethernet0 Clock Select */ +#define SDR0_MFR_ETH1_CLK_SEL 0x04000000 /* Ethernet1 Clock Select */ +#define SDR0_MFR_ZMII_MODE_MASK 0x03000000 /* ZMII Mode Mask */ +#define SDR0_MFR_ZMII_MODE_MII 0x00000000 /* ZMII Mode MII */ +#define SDR0_MFR_ZMII_MODE_SMII 0x01000000 /* ZMII Mode SMII */ +#define SDR0_MFR_ZMII_MODE_RMII_10M 0x02000000 /* ZMII Mode RMII - 10 Mbs */ +#define SDR0_MFR_ZMII_MODE_RMII_100M 0x03000000 /* ZMII Mode RMII - 100 Mbs */ +#define SDR0_MFR_ZMII_MODE_BIT0 0x02000000 /* ZMII Mode Bit0 */ +#define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */ +#define SDR0_MFR_ERRATA3_EN0 0x00800000 +#define SDR0_MFR_ERRATA3_EN1 0x00400000 +#define SDR0_MFR_PKT_REJ_MASK 0x00300000 /* Pkt Rej. Enable Mask */ +#define SDR0_MFR_PKT_REJ_EN 0x00300000 /* Pkt Rej. Enable on both EMAC3 0-1 */ +#define SDR0_MFR_PKT_REJ_EN0 0x00200000 /* Pkt Rej. Enable on EMAC3(0) */ +#define SDR0_MFR_PKT_REJ_EN1 0x00100000 /* Pkt Rej. Enable on EMAC3(1) */ +#define SDR0_MFR_PKT_REJ_POL 0x00080000 /* Packet Reject Polarity */ + #define SDR0_SRST_BGO 0x80000000 #define SDR0_SRST_PLB 0x40000000 #define SDR0_SRST_EBC 0x20000000 @@ -927,7 +1042,7 @@ /*-----------------------------------------------------------------------------+ | Clocking +-----------------------------------------------------------------------------*/ -#if !defined (CONFIG_440_GX) +#if !defined (CONFIG_440_GX) && !defined(CONFIG_440_EP) && !defined(CONFIG_440_GR) #define PLLSYS0_TUNE_MASK 0xffc00000 /* PLL TUNE bits */ #define PLLSYS0_FB_DIV_MASK 0x003c0000 /* Feedback divisor */ #define PLLSYS0_FWD_DIV_A_MASK 0x00038000 /* Forward divisor A */ @@ -945,7 +1060,7 @@ #define PLL_VCO_FREQ_MAX 1000 /* Max VCO freq (MHz) */ #define PLL_CPU_FREQ_MAX 400 /* Max CPU freq (MHz) */ #define PLL_PLB_FREQ_MAX 133 /* Max PLB freq (MHz) */ -#else /* !CONFIG_440_GX */ +#else /* !CONFIG_440_GX or CONFIG_440_EP or CONFIG_440_GR */ #define PLLSYS0_ENG_MASK 0x80000000 /* 0 = SysClk, 1 = PLL VCO */ #define PLLSYS0_SRC_MASK 0x40000000 /* 0 = PLL A, 1 = PLL B */ #define PLLSYS0_SEL_MASK 0x38000000 /* 0 = PLL, 1 = CPU, 5 = PerClk */ @@ -956,6 +1071,19 @@ #define PLLSYS0_PRI_DIV_B_MASK 0x0000001c /* PLL Primary Divisor B */ #define PLLSYS0_OPB_DIV_MASK 0x00000003 /* OPB Divisor */ +#define PLLC_ENG_MASK 0x20000000 /* PLL primary forward divisor source */ +#define PLLC_SRC_MASK 0x20000000 /* PLL feedback source */ +#define PLLD_FBDV_MASK 0x1f000000 /* PLL Feedback Divisor */ +#define PLLD_FWDVA_MASK 0x000f0000 /* PLL Forward Divisor A */ +#define PLLD_FWDVB_MASK 0x00000700 /* PLL Forward Divisor B */ +#define PLLD_LFBDV_MASK 0x0000003f /* PLL Local Feedback Divisor */ + +#define OPBDDV_MASK 0x03000000 /* OPB Clock Divisor Register */ +#define PERDV_MASK 0x07000000 /* Periferal Clock Divisor */ +#define PRADV_MASK 0x07000000 /* Primary Divisor A */ +#define PRBDV_MASK 0x07000000 /* Primary Divisor B */ +#define SPCID_MASK 0x03000000 /* Sync PCI Divisor */ + #define PLL_VCO_FREQ_MIN 500 /* Min VCO freq (MHz) */ #define PLL_VCO_FREQ_MAX 1000 /* Max VCO freq (MHz) */ #define PLL_CPU_FREQ_MAX 400 /* Max CPU freq (MHz) */ @@ -1023,6 +1151,34 @@ #define PCIX0_CFGBASE (CFG_PCI_BASE + 0x0ec80000) #define PCIX0_IOBASE (CFG_PCI_BASE + 0x08000000) +#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR) + +/* PCI Local Configuration Registers + --------------------------------- */ +#define PCI_MMIO_LCR_BASE (CFG_PCI_BASE + 0x0f400000) /* Real => 0x0EF400000 */ + +/* PCI Master Local Configuration Registers */ +#define PCIX0_PMM0LA (PCI_MMIO_LCR_BASE + 0x00) /* PMM0 Local Address */ +#define PCIX0_PMM0MA (PCI_MMIO_LCR_BASE + 0x04) /* PMM0 Mask/Attribute */ +#define PCIX0_PMM0PCILA (PCI_MMIO_LCR_BASE + 0x08) /* PMM0 PCI Low Address */ +#define PCIX0_PMM0PCIHA (PCI_MMIO_LCR_BASE + 0x0C) /* PMM0 PCI High Address */ +#define PCIX0_PMM1LA (PCI_MMIO_LCR_BASE + 0x10) /* PMM1 Local Address */ +#define PCIX0_PMM1MA (PCI_MMIO_LCR_BASE + 0x14) /* PMM1 Mask/Attribute */ +#define PCIX0_PMM1PCILA (PCI_MMIO_LCR_BASE + 0x18) /* PMM1 PCI Low Address */ +#define PCIX0_PMM1PCIHA (PCI_MMIO_LCR_BASE + 0x1C) /* PMM1 PCI High Address */ +#define PCIX0_PMM2LA (PCI_MMIO_LCR_BASE + 0x20) /* PMM2 Local Address */ +#define PCIX0_PMM2MA (PCI_MMIO_LCR_BASE + 0x24) /* PMM2 Mask/Attribute */ +#define PCIX0_PMM2PCILA (PCI_MMIO_LCR_BASE + 0x28) /* PMM2 PCI Low Address */ +#define PCIX0_PMM2PCIHA (PCI_MMIO_LCR_BASE + 0x2C) /* PMM2 PCI High Address */ + +/* PCI Target Local Configuration Registers */ +#define PCIX0_PTM1MS (PCI_MMIO_LCR_BASE + 0x30) /* PTM1 Memory Size/Attribute */ +#define PCIX0_PTM1LA (PCI_MMIO_LCR_BASE + 0x34) /* PTM1 Local Addr. Reg */ +#define PCIX0_PTM2MS (PCI_MMIO_LCR_BASE + 0x38) /* PTM2 Memory Size/Attribute */ +#define PCIX0_PTM2LA (PCI_MMIO_LCR_BASE + 0x3C) /* PTM2 Local Addr. Reg */ + +#else + #define PCIX0_VENDID (PCIX0_CFGBASE + PCI_VENDOR_ID ) #define PCIX0_DEVID (PCIX0_CFGBASE + PCI_DEVICE_ID ) #define PCIX0_CMD (PCIX0_CFGBASE + PCI_COMMAND ) @@ -1079,6 +1235,52 @@ #define PCIX0_STS (PCIX0_CFGBASE + 0x00e0) +#endif /* !defined(CONFIG_440_EP) !defined(CONFIG_440_GR) */ + +/****************************************************************************** + * GPIO macro register defines + ******************************************************************************/ +#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR) +#define GPIO_BASE0 (CFG_PERIPHERAL_BASE+0x00000B00) +#define GPIO_BASE1 (CFG_PERIPHERAL_BASE+0x00000C00) + +#define GPIO0_OR (GPIO_BASE0+0x0) +#define GPIO0_TCR (GPIO_BASE0+0x4) +#define GPIO0_OSRL (GPIO_BASE0+0x8) +#define GPIO0_OSRH (GPIO_BASE0+0xC) +#define GPIO0_TSRL (GPIO_BASE0+0x10) +#define GPIO0_TSRH (GPIO_BASE0+0x14) +#define GPIO0_ODR (GPIO_BASE0+0x18) +#define GPIO0_IR (GPIO_BASE0+0x1C) +#define GPIO0_RR1 (GPIO_BASE0+0x20) +#define GPIO0_RR2 (GPIO_BASE0+0x24) +#define GPIO0_RR3 (GPIO_BASE0+0x28) +#define GPIO0_ISR1L (GPIO_BASE0+0x30) +#define GPIO0_ISR1H (GPIO_BASE0+0x34) +#define GPIO0_ISR2L (GPIO_BASE0+0x38) +#define GPIO0_ISR2H (GPIO_BASE0+0x3C) +#define GPIO0_ISR3L (GPIO_BASE0+0x40) +#define GPIO0_ISR3H (GPIO_BASE0+0x44) + +#define GPIO1_OR (GPIO_BASE1+0x0) +#define GPIO1_TCR (GPIO_BASE1+0x4) +#define GPIO1_OSRL (GPIO_BASE1+0x8) +#define GPIO1_OSRH (GPIO_BASE1+0xC) +#define GPIO1_TSRL (GPIO_BASE1+0x10) +#define GPIO1_TSRH (GPIO_BASE1+0x14) +#define GPIO1_ODR (GPIO_BASE1+0x18) +#define GPIO1_IR (GPIO_BASE1+0x1C) +#define GPIO1_RR1 (GPIO_BASE1+0x20) +#define GPIO1_RR2 (GPIO_BASE1+0x24) +#define GPIO1_RR3 (GPIO_BASE1+0x28) +#define GPIO1_ISR1L (GPIO_BASE1+0x30) +#define GPIO1_ISR1H (GPIO_BASE1+0x34) +#define GPIO1_ISR2L (GPIO_BASE1+0x38) +#define GPIO1_ISR2H (GPIO_BASE1+0x3C) +#define GPIO1_ISR3L (GPIO_BASE1+0x40) +#define GPIO1_ISR3H (GPIO_BASE1+0x44) +#endif + /* * Macros for accessing the indirect EBC registers */ @@ -1111,12 +1313,17 @@ typedef struct { unsigned long pllFwdDivB; unsigned long pllFbkDiv; unsigned long pllOpbDiv; + unsigned long pllPciDiv; unsigned long pllExtBusDiv; unsigned long freqVCOMhz; /* in MHz */ unsigned long freqProcessor; + unsigned long freqTmrClk; unsigned long freqPLB; unsigned long freqOPB; unsigned long freqEPB; + unsigned long freqPCI; + unsigned long pciIntArbEn; /* Internal PCI arbiter is enabled */ + unsigned long pciClkSync; /* PCI clock is synchronous */ } PPC440_SYS_INFO; #endif /* _ASMLANGUAGE */ diff --git a/include/usb_defs.h b/include/usb_defs.h index 353019f..33d1e46 100644 --- a/include/usb_defs.h +++ b/include/usb_defs.h @@ -26,6 +26,20 @@ #ifndef _USB_DEFS_H_ #define _USB_DEFS_H_ + +/* Everything is aribtrary */ +#define USB_ALTSETTINGALLOC 4 +#define USB_MAXALTSETTING 128 /* Hard limit */ + +#define USB_MAX_DEVICE 32 +#define USB_MAXCONFIG 8 +#define USB_MAXINTERFACES 8 +#define USB_MAXENDPOINTS 16 +#define USB_MAXCHILDREN 8 /* This is arbitrary */ +#define USB_MAX_HUB 16 + +#define USB_CNTL_TIMEOUT 100 /* 100ms timeout */ + /* USB constants */ /* Device and/or Interface Class codes */ |