diff options
author | Wolfgang Denk <wd@denx.de> | 2009-04-30 21:01:08 (GMT) |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2009-04-30 21:01:08 (GMT) |
commit | ccb71dfac94d4a9ef161a59a51b4f31d7d9e4747 (patch) | |
tree | 78cfc03a11b67fddaf1168bcec19a710016bdb5d /include | |
parent | bf2ba6d46e1046e54e1de30b4df40e384a355195 (diff) | |
parent | a1e5f93185d0d85a4b3fad3b6c743cddcd373b0c (diff) | |
download | u-boot-fsl-qoriq-ccb71dfac94d4a9ef161a59a51b4f31d7d9e4747.tar.xz |
Merge branch 'master' of git://git.denx.de/u-boot-arm
Diffstat (limited to 'include')
-rw-r--r-- | include/asm-arm/arch-omap3/omap3.h | 22 | ||||
-rw-r--r-- | include/asm-arm/arch-omap3/sys_proto.h | 4 | ||||
-rw-r--r-- | include/configs/SX1.h | 6 | ||||
-rw-r--r-- | include/configs/davinci_dvevm.h | 3 | ||||
-rw-r--r-- | include/configs/davinci_schmoogie.h | 3 | ||||
-rw-r--r-- | include/configs/davinci_sffsdr.h | 3 | ||||
-rw-r--r-- | include/configs/davinci_sonata.h | 3 | ||||
-rw-r--r-- | include/configs/netstar.h | 6 | ||||
-rw-r--r-- | include/configs/omap1510inn.h | 6 | ||||
-rw-r--r-- | include/configs/omap3_beagle.h | 37 | ||||
-rw-r--r-- | include/configs/omap3_evm.h | 38 | ||||
-rw-r--r-- | include/configs/omap3_overo.h | 38 | ||||
-rw-r--r-- | include/configs/omap3_pandora.h | 37 | ||||
-rw-r--r-- | include/configs/omap3_zoom1.h | 8 | ||||
-rw-r--r-- | include/configs/voiceblue.h | 4 | ||||
-rw-r--r-- | include/s3c6400.h | 4 |
16 files changed, 59 insertions, 163 deletions
diff --git a/include/asm-arm/arch-omap3/omap3.h b/include/asm-arm/arch-omap3/omap3.h index 8c9656f..7c11019 100644 --- a/include/asm-arm/arch-omap3/omap3.h +++ b/include/asm-arm/arch-omap3/omap3.h @@ -167,24 +167,20 @@ typedef struct gpio { * 343x real hardware: * ES1 = rev 0 * - * 343x code defines: - * ES1 = 0+1 = 1 - * ES1 = 1+1 = 1 + * ES2 onwards, the value maps to contents of IDCODE register [31:28]. */ -#define CPU_3430_ES1 1 -#define CPU_3430_ES2 2 +#define CPU_3XX_ES10 0 +#define CPU_3XX_ES20 1 +#define CPU_3XX_ES21 2 +#define CPU_3XX_ES30 3 +#define CPU_3XX_ES31 4 +#define CPU_3XX_MAX_REV (CPU_3XX_ES31 + 1) + +#define CPU_3XX_ID_SHIFT 28 #define WIDTH_8BIT 0x0000 #define WIDTH_16BIT 0x1000 /* bit pos for 16 bit in gpmc */ -/* SDP definitions according to FPGA Rev. Is this OK?? */ -#define SDP_3430_V1 0x1 -#define SDP_3430_V2 0x2 - -/* EVM definitions */ -#define OMAP3EVM_V1 0x1 -#define OMAP3EVM_V2 0x2 - /* I2C power management companion definitions */ #define PWRMGT_ADDR_ID1 0x48 #define PWRMGT_ADDR_ID2 0x49 diff --git a/include/asm-arm/arch-omap3/sys_proto.h b/include/asm-arm/arch-omap3/sys_proto.h index 8b554bb..7361d08 100644 --- a/include/asm-arm/arch-omap3/sys_proto.h +++ b/include/asm-arm/arch-omap3/sys_proto.h @@ -22,8 +22,6 @@ #define _SYS_PROTO_H_ typedef struct { - u32 board_type_v1; - u32 board_type_v2; u32 mtype; char *board_string; char *nand_string; @@ -46,8 +44,6 @@ u32 get_sysboot_value(void); u32 is_gpmc_muxed(void); u32 get_gpmc0_type(void); u32 get_gpmc0_width(void); -u32 get_board_type(void); -void display_board_info(u32); u32 get_sdr_cs_size(u32); u32 get_sdr_cs_offset(u32); u32 is_running_in_sdram(void); diff --git a/include/configs/SX1.h b/include/configs/SX1.h index caa6592..6149276 100644 --- a/include/configs/SX1.h +++ b/include/configs/SX1.h @@ -135,12 +135,12 @@ #define CONFIG_SYS_LOAD_ADDR 0x10000000 /* default load address */ -/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1. +/* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1. * This time is further subdivided by a local divisor. */ #define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE /* use timer 1 */ -#define CONFIG_SYS_PTV 7 /* 2^(PTV+1), divide by 256 */ -#define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV)) +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 /*----------------------------------------------------------------------- * Stack sizes diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h index fae430b..9fe4072 100644 --- a/include/configs/davinci_dvevm.h +++ b/include/configs/davinci_dvevm.h @@ -56,7 +56,6 @@ /* SoC Configuration */ /*===================*/ #define CONFIG_ARM926EJS /* arm926ejs CPU core */ -#define CONFIG_SYS_CLK_FREQ 297000000 /* Arm Clock frequency */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ #define CONFIG_SYS_HZ 1000 @@ -87,7 +86,7 @@ #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size, byteorder */ #define CONFIG_SYS_NS16550_COM1 0x01c20000 /* Base address of UART0 */ -#define CONFIG_SYS_NS16550_CLK 27000000 /* Input clock to NS16550 */ +#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK /* Input clock to NS16550 */ #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h index 923e477..a16ac39 100644 --- a/include/configs/davinci_schmoogie.h +++ b/include/configs/davinci_schmoogie.h @@ -31,7 +31,6 @@ /* SoC Configuration */ /*===================*/ #define CONFIG_ARM926EJS /* arm926ejs CPU core */ -#define CONFIG_SYS_CLK_FREQ 297000000 /* Arm Clock frequency */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ #define CONFIG_SYS_HZ 1000 @@ -54,7 +53,7 @@ #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size, byteorder */ #define CONFIG_SYS_NS16550_COM1 0x01c20000 /* Base address of UART0 */ -#define CONFIG_SYS_NS16550_CLK 27000000 /* Input clock to NS16550 */ +#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK /* Input clock to NS16550 */ #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h index 73a59db..c2ebd97 100644 --- a/include/configs/davinci_sffsdr.h +++ b/include/configs/davinci_sffsdr.h @@ -32,7 +32,6 @@ * powering ON the DSP. */ /* SoC Configuration */ #define CONFIG_ARM926EJS /* arm926ejs CPU core */ -#define CONFIG_SYS_CLK_FREQ 297000000 /* Arm Clock frequency */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ #define CONFIG_SYS_HZ 1000 @@ -56,7 +55,7 @@ #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size, byteorder */ #define CONFIG_SYS_NS16550_COM1 0x01c20000 /* Base address of UART0 */ -#define CONFIG_SYS_NS16550_CLK 27000000 /* Input clock to NS16550 */ +#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK /* Input clock to NS16550 */ #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h index 70d2c7d..0fc6012 100644 --- a/include/configs/davinci_sonata.h +++ b/include/configs/davinci_sonata.h @@ -56,7 +56,6 @@ /* SoC Configuration */ /*===================*/ #define CONFIG_ARM926EJS /* arm926ejs CPU core */ -#define CONFIG_SYS_CLK_FREQ 297000000 /* Arm Clock frequency */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ #define CONFIG_SYS_HZ 1000 @@ -87,7 +86,7 @@ #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size, byteorder */ #define CONFIG_SYS_NS16550_COM1 0x01c20000 /* Base address of UART0 */ -#define CONFIG_SYS_NS16550_CLK 27000000 /* Input clock to NS16550 */ +#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK /* Input clock to NS16550 */ #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } diff --git a/include/configs/netstar.h b/include/configs/netstar.h index 39560de..5cfee66 100644 --- a/include/configs/netstar.h +++ b/include/configs/netstar.h @@ -222,12 +222,12 @@ #define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM_1 + 0x400000 /* default load address */ -/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1. +/* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1. * This time is further subdivided by a local divisor. */ #define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE -#define CONFIG_SYS_PTV 7 /* 2^(pvt+1), divide by 256 */ -#define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV)) +#define CONFIG_SYS_PTV 7 +#define CONFIG_SYS_HZ 1000 #define OMAP5910_DPLL_DIV 1 #define OMAP5910_DPLL_MUL ((CONFIG_SYS_CLK_FREQ * \ diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h index 6c1c5ec..8408209 100644 --- a/include/configs/omap1510inn.h +++ b/include/configs/omap1510inn.h @@ -132,12 +132,12 @@ #define CONFIG_SYS_LOAD_ADDR 0x10000000 /* default load address */ -/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1. +/* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1. * This time is further subdivided by a local divisor. */ #define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE /* use timer 1 */ -#define CONFIG_SYS_PTV 7 /* 2^(PTV+1), divide by 256 */ -#define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV)) +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 /*----------------------------------------------------------------------- * Stack sizes diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 5a948e4..d8c328f 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -41,6 +41,12 @@ #include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap3.h> +/* + * Display CPU and Board information + */ +#define CONFIG_DISPLAY_CPUINFO 1 +#define CONFIG_DISPLAY_BOARDINFO 1 + /* Clock Defines */ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) @@ -135,18 +141,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ -#define SECTORSIZE 512 - -#define NAND_ALLOW_ERASE_ALL -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 -#define NAND_NO_RB 1 -#define CONFIG_SYS_NAND_WP #define CONFIG_JFFS2_NAND /* nand device jffs2 lives on */ @@ -185,7 +179,7 @@ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmcinit; then " \ + "if mmc init; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ @@ -306,21 +300,4 @@ extern unsigned int boot_flash_sec; extern unsigned int boot_flash_type; #endif - -#define WRITE_NAND_COMMAND(d, adr)\ - writel(d, &nand_cs_base->nand_cmd) -#define WRITE_NAND_ADDRESS(d, adr)\ - writel(d, &nand_cs_base->nand_adr) -#define WRITE_NAND(d, adr) writew(d, &nand_cs_base->nand_dat) -#define READ_NAND(adr) readl(&nand_cs_base->nand_dat) - -/* Other NAND Access APIs */ -#define NAND_WP_OFF() do {readl(&gpmc_cfg_base->config) |= GPMC_CONFIG_WP; } \ - while (0) -#define NAND_WP_ON() do {readl(&gpmc_cfg_base->config) &= ~GPMC_CONFIG_WP; } \ - while (0) -#define NAND_DISABLE_CE(nand) -#define NAND_ENABLE_CE(nand) -#define NAND_WAIT_READY(nand) udelay(10) - #endif /* __CONFIG_H */ diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 8cd8a1b..ab014e9 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -46,6 +46,12 @@ #include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap3.h> +/* + * Display CPU and Board information + */ +#define CONFIG_DISPLAY_CPUINFO 1 +#define CONFIG_DISPLAY_BOARDINFO 1 + /* Clock Defines */ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) @@ -66,7 +72,6 @@ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) #define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ /* initial data */ - /* * Hardware drivers */ @@ -133,18 +138,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ /* NAND devices */ -#define SECTORSIZE 512 - -#define NAND_ALLOW_ERASE_ALL -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 -#define NAND_NO_RB 1 -#define CONFIG_SYS_NAND_WP #define CONFIG_JFFS2_NAND /* nand device jffs2 lives on */ @@ -178,7 +171,7 @@ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmcinit; then " \ + "if mmc init; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ @@ -299,23 +292,6 @@ extern unsigned int boot_flash_sec; extern unsigned int boot_flash_type; #endif - -#define WRITE_NAND_COMMAND(d, adr)\ - writel(d, &nand_cs_base->nand_cmd) -#define WRITE_NAND_ADDRESS(d, adr)\ - writel(d, &nand_cs_base->nand_adr) -#define WRITE_NAND(d, adr) writew(d, &nand_cs_base->nand_dat) -#define READ_NAND(adr) readl(&nand_cs_base->nand_dat) - -/* Other NAND Access APIs */ -#define NAND_WP_OFF() do {readl(&gpmc_cfg_base->config) |= GPMC_CONFIG_WP; } \ - while (0) -#define NAND_WP_ON() do {readl(&gpmc_cfg_base->config) &= ~GPMC_CONFIG_WP; } \ - while (0) -#define NAND_DISABLE_CE(nand) -#define NAND_ENABLE_CE(nand) -#define NAND_WAIT_READY(nand) udelay(10) - /*---------------------------------------------------------------------------- * SMSC9115 Ethernet from SMSC9118 family *---------------------------------------------------------------------------- diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index 51b04b6..d941497 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -33,6 +33,12 @@ #include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap3.h> +/* + * Display CPU and Board information + */ +#define CONFIG_DISPLAY_CPUINFO 1 +#define CONFIG_DISPLAY_BOARDINFO 1 + /* Clock Defines */ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) @@ -122,19 +128,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ -#define SECTORSIZE 512 - -#define NAND_ALLOW_ERASE_ALL -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 -#define NAND_NO_RB 1 -#define CONFIG_SYS_NAND_WP - #define CONFIG_JFFS2_NAND /* nand device jffs2 lives on */ #define CONFIG_JFFS2_DEV "nand0" @@ -172,7 +165,7 @@ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmcinit; then " \ + "if mmc init; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ @@ -293,21 +286,4 @@ extern unsigned int boot_flash_sec; extern unsigned int boot_flash_type; #endif - -#define WRITE_NAND_COMMAND(d, adr)\ - writel(d, &nand_cs_base->nand_cmd) -#define WRITE_NAND_ADDRESS(d, adr)\ - writel(d, &nand_cs_base->nand_adr) -#define WRITE_NAND(d, adr) writew(d, &nand_cs_base->nand_dat) -#define READ_NAND(adr) readl(&nand_cs_base->nand_dat) - -/* Other NAND Access APIs */ -#define NAND_WP_OFF() do {readl(&gpmc_cfg_base->config) |= GPMC_CONFIG_WP; } \ - while (0) -#define NAND_WP_ON() do {readl(&gpmc_cfg_base->config) &= ~GPMC_CONFIG_WP; } \ - while (0) -#define NAND_DISABLE_CE(nand) -#define NAND_ENABLE_CE(nand) -#define NAND_WAIT_READY(nand) udelay(10) - #endif /* __CONFIG_H */ diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index 40107a6..f9f6480 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -36,6 +36,12 @@ #include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap3.h> +/* + * Display CPU and Board information + */ +#define CONFIG_DISPLAY_CPUINFO 1 +#define CONFIG_DISPLAY_BOARDINFO 1 + /* Clock Defines */ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) @@ -125,18 +131,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ -#define SECTORSIZE 512 - -#define NAND_ALLOW_ERASE_ALL -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 -#define NAND_NO_RB 1 -#define CONFIG_SYS_NAND_WP #define CONFIG_JFFS2_NAND /* nand device jffs2 lives on */ @@ -174,7 +168,7 @@ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmcinit; then " \ + "if mmc init; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ @@ -295,21 +289,4 @@ extern unsigned int boot_flash_sec; extern unsigned int boot_flash_type; #endif - -#define WRITE_NAND_COMMAND(d, adr)\ - writel(d, &nand_cs_base->nand_cmd) -#define WRITE_NAND_ADDRESS(d, adr)\ - writel(d, &nand_cs_base->nand_adr) -#define WRITE_NAND(d, adr) writew(d, &nand_cs_base->nand_dat) -#define READ_NAND(adr) readl(&nand_cs_base->nand_dat) - -/* Other NAND Access APIs */ -#define NAND_WP_OFF() do {readl(&gpmc_cfg_base->config) |= GPMC_CONFIG_WP; } \ - while (0) -#define NAND_WP_ON() do {readl(&gpmc_cfg_base->config) &= ~GPMC_CONFIG_WP; } \ - while (0) -#define NAND_DISABLE_CE(nand) -#define NAND_ENABLE_CE(nand) -#define NAND_WAIT_READY(nand) udelay(10) - #endif /* __CONFIG_H */ diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index 8e984b4..b275b15 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -42,6 +42,12 @@ #include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap3.h> +/* + * Display CPU and Board information + */ +#define CONFIG_DISPLAY_CPUINFO 1 +#define CONFIG_DISPLAY_BOARDINFO 1 + /* Clock Defines */ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) @@ -182,7 +188,7 @@ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmcinit; then " \ + "if mmc init; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/voiceblue.h b/include/configs/voiceblue.h index 3f97843..aa8efaa 100644 --- a/include/configs/voiceblue.h +++ b/include/configs/voiceblue.h @@ -210,12 +210,12 @@ #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 #define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - PHYS_SDRAM_1_RESERVED -/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1. +/* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1. * This time is further subdivided by a local divisor. */ #define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE #define CONFIG_SYS_PTV 7 /* 2^(PTV+1), divide by 256 */ -#define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV)) +#define CONFIG_SYS_HZ 1000 #define OMAP5910_DPLL_DIV 1 #define OMAP5910_DPLL_MUL ((CONFIG_SYS_CLK_FREQ * \ diff --git a/include/s3c6400.h b/include/s3c6400.h index 87f3760..e527c08 100644 --- a/include/s3c6400.h +++ b/include/s3c6400.h @@ -31,10 +31,6 @@ #ifndef __S3C6400_H__ #define __S3C6400_H__ -#ifndef CONFIG_S3C6400 -#define CONFIG_S3C6400 1 -#endif - #define S3C64XX_UART_CHANNELS 3 #define S3C64XX_SPI_CHANNELS 2 |