Convert CONFIG_OMAP3_SPI to Kconfig

This converts the following to Kconfig:
   CONFIG_OMAP3_SPI

Signed-off-by: Adam Ford <aford173@gmail.com>
[trini: Minor comment tweaks]
Signed-off-by: Tom Rini <trini@konsulko.com>

16 files changed, 0 insertions, 24 deletions

diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 17fc286..6a35a08 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -142,7 +142,6 @@
 #endif
 
 /* SPI */
-#undef CONFIG_OMAP3_SPI
 #define CONFIG_TI_SPI_MMAP
 #define CONFIG_QSPI_SEL_GPIO                   48
 #define CONFIG_SF_DEFAULT_SPEED                48000000
diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h
index 9f07bba..0c70c53 100644
--- a/include/configs/am57xx_evm.h
+++ b/include/configs/am57xx_evm.h
@@ -123,7 +123,6 @@
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x40000
 
 /* SPI */
-#undef	CONFIG_OMAP3_SPI
 #define CONFIG_TI_SPI_MMAP
 #define CONFIG_SF_DEFAULT_SPEED                76800000
 #define CONFIG_SF_DEFAULT_MODE                 SPI_MODE_0
diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h
index f965fc9..07a173f 100644
--- a/include/configs/brppt1.h
+++ b/include/configs/brppt1.h
@@ -234,7 +234,6 @@ MMCARGS
 #if defined(CONFIG_SPI_BOOT)
 /* McSPI IP block */
 #define CONFIG_SPI
-#define CONFIG_OMAP3_SPI
 #define CONFIG_SF_DEFAULT_SPEED		24000000
 
 #define CONFIG_SPL_SPI_LOAD
diff --git a/include/configs/cl-som-am57x.h b/include/configs/cl-som-am57x.h
index 49db5a9..3aaa82c 100644
--- a/include/configs/cl-som-am57x.h
+++ b/include/configs/cl-som-am57x.h
@@ -29,8 +29,6 @@
 #define CONFIG_SYS_SPD_BUS_NUM 3
 
 /* SPI Flash support */
-#undef  CONFIG_OMAP3_SPI
-
 #define CONFIG_TI_SPI_MMAP
 #define CONFIG_SF_DEFAULT_SPEED		48000000
 #define CONFIG_DEFAULT_SPI_MODE		SPI_MODE_3
diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h
index 47c0b25..df81f7d 100644
--- a/include/configs/cm_t335.h
+++ b/include/configs/cm_t335.h
@@ -16,7 +16,6 @@
 #include <configs/ti_am335x_common.h>
 
 #undef CONFIG_SPI
-#undef CONFIG_OMAP3_SPI
 #undef CONFIG_BOOTCOUNT_LIMIT
 #undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
 
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index f8f3c92..52b713d 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -248,8 +248,6 @@
 #define CONFIG_BMP_16BPP
 #define CONFIG_SCF0403_LCD
 
-#define CONFIG_OMAP3_SPI
-
 /* Defines for SPL */
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_NAND_SIMPLE
diff --git a/include/configs/cm_t3517.h b/include/configs/cm_t3517.h
index 5821183..3a9fd2a 100644
--- a/include/configs/cm_t3517.h
+++ b/include/configs/cm_t3517.h
@@ -249,8 +249,6 @@
 #define CONFIG_BMP_16BPP
 #define CONFIG_SCF0403_LCD
 
-#define CONFIG_OMAP3_SPI
-
 /* EEPROM */
 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 5edf0a9..2bf0983 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -60,7 +60,6 @@
 
 /* SPI */
 #undef CONFIG_SPI
-#undef CONFIG_OMAP3_SPI
 
 /* I2C */
 
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index e124bda..efe63da 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -115,7 +115,6 @@
 #define CONFIG_PHY_TI
 
 /* SPI */
-#undef	CONFIG_OMAP3_SPI
 #define CONFIG_TI_SPI_MMAP
 #define CONFIG_SF_DEFAULT_SPEED                76800000
 #define CONFIG_SF_DEFAULT_MODE                 SPI_MODE_0
diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h
index 6d58927..a072708 100644
--- a/include/configs/nokia_rx51.h
+++ b/include/configs/nokia_rx51.h
@@ -102,7 +102,6 @@
 #define CONFIG_CMDLINE_EDITING		/* add command line history */
 #define CONFIG_AUTO_COMPLETE		/* add autocompletion support */
 
-#define CONFIG_OMAP3_SPI
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_OMAP24_I2C_SPEED	100000
 #define CONFIG_SYS_OMAP24_I2C_SLAVE	1
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index fe83e71..33d29b5 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -255,8 +255,6 @@
 #define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
 #define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET
 
-#define CONFIG_OMAP3_SPI
-
 /* Defines for SPL */
 #define CONFIG_SPL_OMAP3_ID_NAND
 
diff --git a/include/configs/omap3_cairo.h b/include/configs/omap3_cairo.h
index 729bcc7..560e500 100644
--- a/include/configs/omap3_cairo.h
+++ b/include/configs/omap3_cairo.h
@@ -176,8 +176,6 @@
 #define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
 #define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET
 
-#define CONFIG_OMAP3_SPI
-
 /* Defines for SPL */
 #define CONFIG_SPL_OMAP3_ID_NAND
 
diff --git a/include/configs/rut.h b/include/configs/rut.h
index e676a5a..9f9bc71 100644
--- a/include/configs/rut.h
+++ b/include/configs/rut.h
@@ -120,7 +120,6 @@
 #define DA8XX_LCD_CNTL_BASE	LCD_CNTL_BASE
 
 #define CONFIG_SPI
-#define CONFIG_OMAP3_SPI
 
 #define BOARD_LCD_RESET		115	/* Bank 3 pin 19 */
 #define CONFIG_FORMIKE
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index 0d13cae..58b7281 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -72,7 +72,6 @@
 #define CONFIG_SYS_LOAD_ADDR		0x81000000 /* Default load address */
 
 #define CONFIG_SPI
-#define CONFIG_OMAP3_SPI
 #define CONFIG_MTD_DEVICE
 #define CONFIG_SF_DEFAULT_SPEED		(75000000)
 
diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
index 1f36ac6..253270e 100644
--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -213,8 +213,6 @@
 					 CONFIG_SYS_INIT_RAM_SIZE - \
 					 GENERATED_GBL_DATA_SIZE)
 
-#define CONFIG_OMAP3_SPI
-
 /*
  * USB
  *
diff --git a/include/configs/ti_armv7_omap.h b/include/configs/ti_armv7_omap.h
index 6834500..306f503 100644
--- a/include/configs/ti_armv7_omap.h
+++ b/include/configs/ti_armv7_omap.h
@@ -16,9 +16,6 @@
 #define CONFIG_SYS_OMAP24_I2C_SPEED	100000
 #define CONFIG_SYS_OMAP24_I2C_SLAVE	1
 
-/* SPI IP Block */
-#define CONFIG_OMAP3_SPI
-
 /*
  * GPMC NAND block.  We support 1 device and the physical address to
  * access CS0 at is 0x8000000.