summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--.gitignore1
-rw-r--r--MAINTAINERS11
-rw-r--r--Makefile17
-rw-r--r--README29
-rw-r--r--arch/arm/cpu/arm1136/mx35/generic.c2
-rw-r--r--arch/arm/cpu/arm720t/tegra114/cpu.c37
-rw-r--r--arch/arm/cpu/arm920t/ep93xx/u-boot.lds2
-rw-r--r--arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c30
-rw-r--r--arch/arm/cpu/arm926ejs/config.mk2
-rw-r--r--arch/arm/cpu/arm926ejs/mxs/clock.c3
-rw-r--r--arch/arm/cpu/arm926ejs/mxs/mxs_init.h2
-rw-r--r--arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c16
-rw-r--r--arch/arm/cpu/arm926ejs/mxs/spl_power_init.c2
-rw-r--r--arch/arm/cpu/arm926ejs/mxs/timer.c39
-rw-r--r--arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds6
-rw-r--r--arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds6
-rw-r--r--arch/arm/cpu/armv7/Makefile2
-rw-r--r--arch/arm/cpu/armv7/am33xx/board.c4
-rw-r--r--arch/arm/cpu/armv7/am33xx/ddr.c12
-rw-r--r--arch/arm/cpu/armv7/am33xx/u-boot-spl.lds67
-rw-r--r--arch/arm/cpu/armv7/config.mk2
-rw-r--r--arch/arm/cpu/armv7/mx6/Makefile1
-rw-r--r--arch/arm/cpu/armv7/mx6/soc.c16
-rw-r--r--arch/arm/cpu/armv7/omap-common/boot-common.c7
-rw-r--r--arch/arm/cpu/armv7/omap-common/clocks-common.c312
-rw-r--r--arch/arm/cpu/armv7/omap-common/emif-common.c73
-rw-r--r--arch/arm/cpu/armv7/omap-common/hwinit-common.c23
-rw-r--r--arch/arm/cpu/armv7/omap-common/u-boot-spl.lds4
-rw-r--r--arch/arm/cpu/armv7/omap-common/vc.c11
-rw-r--r--arch/arm/cpu/armv7/omap3/board.c6
-rw-r--r--arch/arm/cpu/armv7/omap4/Makefile3
-rw-r--r--arch/arm/cpu/armv7/omap4/clocks.c517
-rw-r--r--arch/arm/cpu/armv7/omap4/hw_data.c491
-rw-r--r--arch/arm/cpu/armv7/omap4/hwinit.c36
-rw-r--r--arch/arm/cpu/armv7/omap4/prcm-regs.c315
-rw-r--r--arch/arm/cpu/armv7/omap4/sdram_elpida.c34
-rw-r--r--arch/arm/cpu/armv7/omap5/Makefile3
-rw-r--r--arch/arm/cpu/armv7/omap5/clocks.c494
-rw-r--r--arch/arm/cpu/armv7/omap5/hw_data.c596
-rw-r--r--arch/arm/cpu/armv7/omap5/hwinit.c292
-rw-r--r--arch/arm/cpu/armv7/omap5/prcm-regs.c958
-rw-r--r--arch/arm/cpu/armv7/omap5/sdram.c214
-rw-r--r--arch/arm/cpu/armv7/start.S19
-rw-r--r--arch/arm/cpu/armv7/tegra20/Makefile1
-rw-r--r--arch/arm/cpu/armv7/tegra20/usb.c567
-rw-r--r--arch/arm/cpu/armv7/zynq/Makefile1
-rw-r--r--arch/arm/cpu/armv7/zynq/cpu.c28
-rw-r--r--arch/arm/cpu/armv7/zynq/slcr.c63
-rw-r--r--arch/arm/cpu/ixp/u-boot.lds14
-rw-r--r--arch/arm/cpu/tegra114-common/pinmux.c410
-rw-r--r--arch/arm/cpu/tegra30-common/pinmux.c190
-rw-r--r--arch/arm/cpu/u-boot-spl.lds93
-rw-r--r--arch/arm/cpu/u-boot.lds15
-rw-r--r--arch/arm/dts/tegra114.dtsi75
-rw-r--r--arch/arm/dts/tegra20.dtsi18
-rw-r--r--arch/arm/dts/tegra30.dtsi124
-rw-r--r--arch/arm/include/asm/arch-am33xx/mmc_host_def.h140
-rw-r--r--arch/arm/include/asm/arch-am33xx/spl.h1
-rw-r--r--arch/arm/include/asm/arch-am33xx/sys_proto.h2
-rw-r--r--arch/arm/include/asm/arch-at91/at91sam9x5.h6
-rw-r--r--arch/arm/include/asm/arch-davinci/gpio.h7
-rw-r--r--arch/arm/include/asm/arch-mx35/spl.h2
-rw-r--r--arch/arm/include/asm/arch-mx6/crm_regs.h12
-rw-r--r--arch/arm/include/asm/arch-mx6/imx-regs.h8
-rw-r--r--arch/arm/include/asm/arch-mx6/iomux.h5
-rw-r--r--arch/arm/include/asm/arch-mx6/mx6-ddr.h85
-rw-r--r--arch/arm/include/asm/arch-mx6/mx6-pins.h31
-rw-r--r--arch/arm/include/asm/arch-mx6/mx6dl-ddr.h71
-rw-r--r--arch/arm/include/asm/arch-mx6/mx6dl_pins.h193
-rw-r--r--arch/arm/include/asm/arch-mx6/mx6q-ddr.h69
-rw-r--r--arch/arm/include/asm/arch-mx6/mx6q_pins.h1671
-rw-r--r--arch/arm/include/asm/arch-mx6/mx6x_pins.h1671
-rw-r--r--arch/arm/include/asm/arch-mx6/mxc_hdmi.h1083
-rw-r--r--arch/arm/include/asm/arch-mxs/dma.h19
-rw-r--r--arch/arm/include/asm/arch-mxs/imx-regs.h2
-rw-r--r--arch/arm/include/asm/arch-mxs/iomux.h5
-rw-r--r--arch/arm/include/asm/arch-mxs/regs-ssp.h26
-rw-r--r--arch/arm/include/asm/arch-mxs/regs-timrot.h101
-rw-r--r--arch/arm/include/asm/arch-omap3/dss.h31
-rw-r--r--arch/arm/include/asm/arch-omap3/mmc_host_def.h139
-rw-r--r--arch/arm/include/asm/arch-omap3/spl.h2
-rw-r--r--arch/arm/include/asm/arch-omap4/clocks.h562
-rw-r--r--arch/arm/include/asm/arch-omap4/mmc_host_def.h140
-rw-r--r--arch/arm/include/asm/arch-omap4/omap.h34
-rw-r--r--arch/arm/include/asm/arch-omap4/spl.h2
-rw-r--r--arch/arm/include/asm/arch-omap4/sys_proto.h2
-rw-r--r--arch/arm/include/asm/arch-omap5/clocks.h539
-rw-r--r--arch/arm/include/asm/arch-omap5/mmc_host_def.h140
-rw-r--r--arch/arm/include/asm/arch-omap5/mux_dra7xx.h344
-rw-r--r--arch/arm/include/asm/arch-omap5/mux_omap5.h8
-rw-r--r--arch/arm/include/asm/arch-omap5/omap.h125
-rw-r--r--arch/arm/include/asm/arch-omap5/spl.h2
-rw-r--r--arch/arm/include/asm/arch-omap5/sys_proto.h10
-rw-r--r--arch/arm/include/asm/arch-tegra/mmc.h2
-rw-r--r--arch/arm/include/asm/arch-tegra/tegra_i2c.h6
-rw-r--r--arch/arm/include/asm/arch-tegra/tegra_mmc.h48
-rw-r--r--arch/arm/include/asm/arch-tegra/usb.h (renamed from arch/arm/include/asm/arch-tegra20/usb.h)22
-rw-r--r--arch/arm/include/asm/arch-tegra114/gp_padctrl.h34
-rw-r--r--arch/arm/include/asm/arch-tegra114/pinmux.h246
-rw-r--r--arch/arm/include/asm/arch-tegra20/tegra.h1
-rw-r--r--arch/arm/include/asm/arch-tegra30/gp_padctrl.h6
-rw-r--r--arch/arm/include/asm/arch-tegra30/pinmux.h67
-rw-r--r--arch/arm/include/asm/arch-tegra30/tegra.h2
-rw-r--r--arch/arm/include/asm/arch-zynq/hardware.h85
-rw-r--r--arch/arm/include/asm/arch-zynq/sys_proto.h (renamed from arch/arm/cpu/armv7/mx6/lowlevel_init.S)27
-rw-r--r--arch/arm/include/asm/armv7.h1
-rw-r--r--arch/arm/include/asm/emif.h20
-rw-r--r--arch/arm/include/asm/omap_common.h523
-rw-r--r--arch/arm/include/asm/omap_mmc.h168
-rw-r--r--arch/arm/lib/Makefile1
-rw-r--r--arch/arm/lib/bss.c39
-rw-r--r--arch/avr32/cpu/u-boot.lds2
-rw-r--r--arch/blackfin/cpu/u-boot.lds2
-rw-r--r--arch/microblaze/cpu/u-boot.lds2
-rw-r--r--arch/mips/cpu/u-boot.lds2
-rw-r--r--arch/nds32/cpu/n1213/u-boot.lds2
-rw-r--r--arch/nios2/cpu/u-boot.lds2
-rw-r--r--arch/powerpc/cpu/74xx_7xx/u-boot.lds2
-rw-r--r--arch/powerpc/cpu/mpc512x/u-boot.lds2
-rw-r--r--arch/powerpc/cpu/mpc5xx/u-boot.lds2
-rw-r--r--arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds2
-rw-r--r--arch/powerpc/cpu/mpc5xxx/u-boot.lds2
-rw-r--r--arch/powerpc/cpu/mpc8220/u-boot.lds2
-rw-r--r--arch/powerpc/cpu/mpc824x/u-boot.lds2
-rw-r--r--arch/powerpc/cpu/mpc8260/u-boot.lds2
-rw-r--r--arch/powerpc/cpu/mpc83xx/u-boot.lds2
-rw-r--r--arch/powerpc/cpu/mpc85xx/u-boot-nand.lds2
-rw-r--r--arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds2
-rw-r--r--arch/powerpc/cpu/mpc85xx/u-boot.lds2
-rw-r--r--arch/powerpc/cpu/mpc86xx/u-boot.lds2
-rw-r--r--arch/powerpc/cpu/ppc4xx/u-boot.lds2
-rw-r--r--arch/sandbox/cpu/u-boot.lds2
-rw-r--r--arch/sh/cpu/sh2/u-boot.lds2
-rw-r--r--arch/sh/cpu/sh3/u-boot.lds2
-rw-r--r--arch/sh/cpu/sh4/u-boot.lds2
-rw-r--r--arch/x86/cpu/u-boot.lds2
-rw-r--r--board/BuS/eb_cpu5282/u-boot.lds2
-rw-r--r--board/LEOX/elpt860/u-boot.lds2
-rw-r--r--board/RPXClassic/u-boot.lds2
-rw-r--r--board/RPXClassic/u-boot.lds.debug2
-rw-r--r--board/RPXlite/u-boot.lds2
-rw-r--r--board/RPXlite/u-boot.lds.debug2
-rw-r--r--board/RPXlite_dw/u-boot.lds2
-rw-r--r--board/RPXlite_dw/u-boot.lds.debug2
-rw-r--r--board/RRvision/u-boot.lds2
-rw-r--r--board/actux1/u-boot.lds24
-rw-r--r--board/actux2/u-boot.lds24
-rw-r--r--board/actux3/u-boot.lds18
-rw-r--r--board/adder/u-boot.lds2
-rw-r--r--board/ait/cam_enc_4xx/u-boot-spl.lds4
-rw-r--r--board/altera/nios2-generic/u-boot.lds2
-rw-r--r--board/amcc/acadia/u-boot-nand.lds2
-rw-r--r--board/amcc/bamboo/u-boot-nand.lds2
-rw-r--r--board/amcc/canyonlands/u-boot-nand.lds2
-rw-r--r--board/amcc/kilauea/u-boot-nand.lds2
-rw-r--r--board/amcc/sequoia/u-boot-nand.lds2
-rw-r--r--board/amcc/sequoia/u-boot-ram.lds2
-rw-r--r--board/astro/mcf5373l/u-boot.lds2
-rw-r--r--board/atmel/at91sam9260ek/at91sam9260ek.c7
-rw-r--r--board/avionic-design/common/tamonten.c19
-rw-r--r--board/avionic-design/dts/tegra20-medcom-wide.dts3
-rw-r--r--board/avionic-design/dts/tegra20-plutux.dts3
-rw-r--r--board/avionic-design/dts/tegra20-tamonten.dtsi489
-rw-r--r--board/avionic-design/dts/tegra20-tec.dts3
-rw-r--r--board/boundary/nitrogen6x/1066mhz_4x128mx16.cfg58
-rw-r--r--board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg58
-rw-r--r--board/boundary/nitrogen6x/6x_bootscript.txt63
-rw-r--r--board/boundary/nitrogen6x/6x_bootscript_android.txt64
-rw-r--r--board/boundary/nitrogen6x/6x_bootscript_android_recovery.txt64
-rw-r--r--board/boundary/nitrogen6x/6x_upgrade.txt45
-rw-r--r--board/boundary/nitrogen6x/800mhz_2x128mx16.cfg58
-rw-r--r--board/boundary/nitrogen6x/800mhz_2x256mx16.cfg58
-rw-r--r--board/boundary/nitrogen6x/800mhz_4x128mx16.cfg57
-rw-r--r--board/boundary/nitrogen6x/800mhz_4x256mx16.cfg58
-rw-r--r--board/boundary/nitrogen6x/Makefile41
-rw-r--r--board/boundary/nitrogen6x/README92
-rw-r--r--board/boundary/nitrogen6x/clocks.cfg46
-rw-r--r--board/boundary/nitrogen6x/ddr-setup.cfg112
-rw-r--r--board/boundary/nitrogen6x/nitrogen6dl.cfg45
-rw-r--r--board/boundary/nitrogen6x/nitrogen6dl2g.cfg45
-rw-r--r--board/boundary/nitrogen6x/nitrogen6q.cfg45
-rw-r--r--board/boundary/nitrogen6x/nitrogen6q2g.cfg45
-rw-r--r--board/boundary/nitrogen6x/nitrogen6s.cfg45
-rw-r--r--board/boundary/nitrogen6x/nitrogen6s1g.cfg45
-rw-r--r--board/boundary/nitrogen6x/nitrogen6x.c895
-rw-r--r--board/cm_t35/Makefile1
-rw-r--r--board/cm_t35/cm_t35.c16
-rw-r--r--board/cm_t35/display.c428
-rw-r--r--board/cobra5272/u-boot.lds2
-rw-r--r--board/cogent/u-boot.lds2
-rw-r--r--board/cogent/u-boot.lds.debug2
-rw-r--r--board/comelit/dig297/dig297.c3
-rw-r--r--board/compal/dts/tegra20-paz00.dts21
-rw-r--r--board/compal/paz00/paz00.c26
-rw-r--r--board/compulab/dts/tegra20-trimslice.dts16
-rw-r--r--board/compulab/trimslice/trimslice.c23
-rw-r--r--board/corscience/tricorder/tricorder.c2
-rw-r--r--board/cray/L1/u-boot.lds.debug2
-rw-r--r--board/dave/PPChameleonEVB/u-boot.lds2
-rw-r--r--board/davinci/da8xxevm/u-boot-spl-da850evm.lds5
-rw-r--r--board/davinci/da8xxevm/u-boot-spl-hawk.lds5
-rw-r--r--board/denx/m28evk/m28evk.c4
-rw-r--r--board/dvlhost/u-boot.lds18
-rw-r--r--board/eltec/mhpc/u-boot.lds2
-rw-r--r--board/eltec/mhpc/u-boot.lds.debug2
-rw-r--r--board/emk/top860/u-boot.lds2
-rw-r--r--board/ep88x/u-boot.lds2
-rw-r--r--board/esd/dasa_sim/u-boot.lds2
-rw-r--r--board/esd/pmc440/u-boot-nand.lds2
-rw-r--r--board/esd/tasreg/u-boot.lds2
-rw-r--r--board/esteem192e/u-boot.lds2
-rw-r--r--board/evb64260/u-boot.lds2
-rw-r--r--board/fads/u-boot.lds2
-rw-r--r--board/flagadm/u-boot.lds2
-rw-r--r--board/flagadm/u-boot.lds.debug2
-rw-r--r--board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg10
-rw-r--r--board/freescale/m5208evbe/u-boot.lds2
-rw-r--r--board/freescale/m52277evb/u-boot.lds2
-rw-r--r--board/freescale/m5235evb/u-boot.lds2
-rw-r--r--board/freescale/m5249evb/u-boot.lds2
-rw-r--r--board/freescale/m5253demo/u-boot.lds2
-rw-r--r--board/freescale/m5253evbe/u-boot.lds2
-rw-r--r--board/freescale/m5271evb/u-boot.lds2
-rw-r--r--board/freescale/m5272c3/u-boot.lds2
-rw-r--r--board/freescale/m5275evb/u-boot.lds2
-rw-r--r--board/freescale/m5282evb/u-boot.lds2
-rw-r--r--board/freescale/m53017evb/u-boot.lds2
-rw-r--r--board/freescale/m5329evb/u-boot.lds2
-rw-r--r--board/freescale/m5373evb/u-boot.lds2
-rw-r--r--board/freescale/m54418twr/u-boot.lds2
-rw-r--r--board/freescale/m54451evb/u-boot.lds2
-rw-r--r--board/freescale/m54455evb/u-boot.lds2
-rw-r--r--board/freescale/m547xevb/u-boot.lds2
-rw-r--r--board/freescale/m548xevb/u-boot.lds2
-rw-r--r--board/freescale/mx23evk/spl_boot.c10
-rw-r--r--board/freescale/mx31ads/u-boot.lds16
-rw-r--r--board/freescale/mx6qarm2/mx6qarm2.c78
-rw-r--r--board/freescale/mx6qsabreauto/mx6qsabreauto.c60
-rw-r--r--board/freescale/mx6qsabrelite/mx6qsabrelite.c292
-rw-r--r--board/freescale/mx6qsabresd/mx6qsabresd.c102
-rw-r--r--board/gaisler/gr_cpci_ax2000/u-boot.lds2
-rw-r--r--board/gaisler/gr_ep2s60/u-boot.lds2
-rw-r--r--board/gaisler/gr_xc3s_1500/u-boot.lds2
-rw-r--r--board/gaisler/grsim/u-boot.lds2
-rw-r--r--board/gaisler/grsim_leon2/u-boot.lds2
-rw-r--r--board/gen860t/u-boot-flashenv.lds2
-rw-r--r--board/gen860t/u-boot.lds2
-rw-r--r--board/genietv/u-boot.lds2
-rw-r--r--board/genietv/u-boot.lds.debug2
-rw-r--r--board/hermes/u-boot.lds2
-rw-r--r--board/hermes/u-boot.lds.debug2
-rw-r--r--board/htkw/mcx/mcx.c3
-rw-r--r--board/hymod/u-boot.lds2
-rw-r--r--board/hymod/u-boot.lds.debug2
-rw-r--r--board/icu862/u-boot.lds2
-rw-r--r--board/icu862/u-boot.lds.debug2
-rw-r--r--board/idmr/u-boot.lds2
-rw-r--r--board/ip860/u-boot.lds2
-rw-r--r--board/ip860/u-boot.lds.debug2
-rw-r--r--board/isee/igep00x0/igep00x0.c3
-rw-r--r--board/isee/igep00x0/igep00x0.h7
-rw-r--r--board/ivm/u-boot.lds2
-rw-r--r--board/ivm/u-boot.lds.debug2
-rw-r--r--board/korat/u-boot-F7FC.lds2
-rw-r--r--board/kup/kup4k/u-boot.lds2
-rw-r--r--board/kup/kup4k/u-boot.lds.debug2
-rw-r--r--board/kup/kup4x/u-boot.lds2
-rw-r--r--board/kup/kup4x/u-boot.lds.debug2
-rw-r--r--board/logicpd/am3517evm/am3517evm.c3
-rw-r--r--board/logicpd/omap3som/omap3logic.c2
-rw-r--r--board/logicpd/zoom1/zoom1.c3
-rw-r--r--board/logicpd/zoom2/zoom2.c3
-rw-r--r--board/lwmon/u-boot.lds2
-rw-r--r--board/lwmon/u-boot.lds.debug2
-rw-r--r--board/manroland/uc100/u-boot.lds2
-rw-r--r--board/matrix_vision/mvblx/fpga.c14
-rw-r--r--board/matrix_vision/mvblx/mvblx.c4
-rw-r--r--board/matrix_vision/mvblx/sys_eeprom.c24
-rw-r--r--board/matrix_vision/mvsmr/u-boot.lds2
-rw-r--r--board/mbx8xx/u-boot.lds2
-rw-r--r--board/mbx8xx/u-boot.lds.debug2
-rw-r--r--board/mousse/u-boot.lds2
-rw-r--r--board/mpl/pip405/u-boot.lds.debug2
-rw-r--r--board/mvblue/u-boot.lds2
-rw-r--r--board/netphone/u-boot.lds2
-rw-r--r--board/netphone/u-boot.lds.debug2
-rw-r--r--board/netta/u-boot.lds2
-rw-r--r--board/netta/u-boot.lds.debug2
-rw-r--r--board/netta2/u-boot.lds2
-rw-r--r--board/netta2/u-boot.lds.debug2
-rw-r--r--board/netvia/u-boot.lds2
-rw-r--r--board/netvia/u-boot.lds.debug2
-rw-r--r--board/nokia/rx51/rx51.c4
-rw-r--r--board/ns9750dev/config.mk16
-rw-r--r--board/ns9750dev/flash.c474
-rw-r--r--board/ns9750dev/led.c46
-rw-r--r--board/ns9750dev/lowlevel_init.S298
-rw-r--r--board/ns9750dev/ns9750dev.c125
-rw-r--r--board/nvidia/cardhu/cardhu.c57
-rw-r--r--board/nvidia/cardhu/cardhu.c.mmc151
-rw-r--r--board/nvidia/cardhu/pinmux-config-cardhu.h21
-rw-r--r--board/nvidia/common/board.c56
-rw-r--r--board/nvidia/dalmore/dalmore.c3
-rw-r--r--board/nvidia/dalmore/pinmux-config-dalmore.h475
-rw-r--r--board/nvidia/dts/tegra114-dalmore.dts35
-rw-r--r--board/nvidia/dts/tegra20-harmony.dts20
-rw-r--r--board/nvidia/dts/tegra20-seaboard.dts15
-rw-r--r--board/nvidia/dts/tegra20-ventana.dts17
-rw-r--r--board/nvidia/dts/tegra20-whistler.dts15
-rw-r--r--board/nvidia/dts/tegra30-cardhu.dts23
-rw-r--r--board/nvidia/harmony/harmony.c26
-rw-r--r--board/nvidia/seaboard/seaboard.c25
-rw-r--r--board/nvidia/whistler/whistler.c30
-rw-r--r--board/nx823/u-boot.lds2
-rw-r--r--board/nx823/u-boot.lds.debug2
-rw-r--r--board/olimex/mx23_olinuxino/mx23_olinuxino.c13
-rw-r--r--board/olimex/mx23_olinuxino/spl_boot.c8
-rw-r--r--board/openrisc/openrisc-generic/u-boot.lds2
-rw-r--r--board/overo/overo.c3
-rw-r--r--board/pandora/pandora.c3
-rw-r--r--board/phytec/pcm051/mux.c1
-rw-r--r--board/quantum/u-boot.lds2
-rw-r--r--board/r360mpi/u-boot.lds2
-rw-r--r--board/rbc823/u-boot.lds2
-rw-r--r--board/renesas/sh7752evb/u-boot.lds2
-rw-r--r--board/renesas/sh7757lcr/u-boot.lds2
-rw-r--r--board/rsdproto/u-boot.lds2
-rw-r--r--board/samsung/smdk5250/smdk5250-uboot-spl.lds2
-rw-r--r--board/samsung/smdk6400/u-boot-nand.lds2
-rw-r--r--board/sandburst/karef/u-boot.lds.debug2
-rw-r--r--board/sandburst/metrobox/u-boot.lds.debug2
-rw-r--r--board/sandpoint/u-boot.lds2
-rw-r--r--board/sixnet/u-boot.lds2
-rw-r--r--board/snmc/qs850/u-boot.lds2
-rw-r--r--board/snmc/qs860t/u-boot.lds2
-rw-r--r--board/spc1920/u-boot.lds2
-rw-r--r--board/spd8xx/u-boot.lds2
-rw-r--r--board/spd8xx/u-boot.lds.debug2
-rw-r--r--board/stx/stxxtc/u-boot.lds2
-rw-r--r--board/stx/stxxtc/u-boot.lds.debug2
-rw-r--r--board/svm_sc8xx/u-boot.lds2
-rw-r--r--board/technexion/twister/twister.c2
-rw-r--r--board/teejet/mt_ventoux/mt_ventoux.c4
-rw-r--r--board/ti/am335x/board.c40
-rw-r--r--board/ti/am3517crane/am3517crane.c3
-rw-r--r--board/ti/beagle/beagle.c17
-rw-r--r--board/ti/beagle/beagle.h6
-rw-r--r--board/ti/dra7xx/Makefile (renamed from board/ns9750dev/Makefile)22
-rw-r--r--board/ti/dra7xx/evm.c103
-rw-r--r--board/ti/dra7xx/mux_data.h47
-rw-r--r--board/ti/evm/evm.c3
-rw-r--r--board/ti/omap5_evm/evm.c4
-rw-r--r--board/ti/panda/panda.c3
-rw-r--r--board/ti/sdp3430/sdp.c3
-rw-r--r--board/ti/sdp4430/sdp.c4
-rw-r--r--board/timll/devkit8000/devkit8000.c3
-rw-r--r--board/toradex/colibri_t20_iris/colibri_t20_iris.c11
-rw-r--r--board/toradex/dts/tegra20-colibri_t20_iris.dts9
-rw-r--r--board/tqc/tqm8xx/u-boot.lds2
-rw-r--r--board/v37/u-boot.lds2
-rw-r--r--board/vpac270/u-boot-spl.lds4
-rw-r--r--board/w7o/u-boot.lds.debug2
-rw-r--r--board/xes/xpedite1000/u-boot.lds.debug2
-rw-r--r--boards.cfg12
-rw-r--r--common/cmd_help.c2
-rw-r--r--common/cmd_led.c6
-rw-r--r--common/cmd_mmc.c7
-rw-r--r--common/cmd_sata.c2
-rw-r--r--common/lcd.c41
-rw-r--r--common/spl/Makefile1
-rw-r--r--common/spl/spl.c10
-rw-r--r--common/spl/spl_onenand.c47
-rw-r--r--config.mk2
-rw-r--r--disk/part.c10
-rw-r--r--disk/part_amiga.c6
-rw-r--r--disk/part_dos.c7
-rw-r--r--disk/part_efi.c8
-rw-r--r--disk/part_iso.c7
-rw-r--r--disk/part_mac.c7
-rw-r--r--doc/README.commands18
-rw-r--r--doc/README.displaying-bmps27
-rw-r--r--doc/README.ns9750dev36
-rw-r--r--doc/README.scrapyard163
-rw-r--r--doc/SPL/README.am335x-network92
-rw-r--r--doc/driver-model/UDM-serial.txt2
-rw-r--r--drivers/gpio/da8xx_gpio.c137
-rw-r--r--drivers/i2c/tegra_i2c.c42
-rw-r--r--drivers/mmc/arm_pl180_mmci.c1
-rw-r--r--drivers/mmc/bfin_sdh.c1
-rw-r--r--drivers/mmc/davinci_mmc.c1
-rw-r--r--drivers/mmc/fsl_esdhc.c1
-rw-r--r--drivers/mmc/ftsdc010_esdhc.c1
-rw-r--r--drivers/mmc/gen_atmel_mci.c1
-rw-r--r--drivers/mmc/mmc.c17
-rw-r--r--drivers/mmc/mmc_spi.c1
-rw-r--r--drivers/mmc/mxcmmc.c1
-rw-r--r--drivers/mmc/mxsmmc.c21
-rw-r--r--drivers/mmc/omap_hsmmc.c103
-rw-r--r--drivers/mmc/sdhci.c1
-rw-r--r--drivers/mmc/sh_mmcif.c1
-rw-r--r--drivers/mmc/tegra_mmc.c227
-rw-r--r--drivers/mtd/onenand/onenand_spl.c14
-rw-r--r--drivers/net/cpsw.c20
-rw-r--r--drivers/serial/Makefile1
-rw-r--r--drivers/serial/ns9750_serial.c218
-rw-r--r--drivers/serial/serial.c2
-rw-r--r--drivers/spi/mxs_spi.c39
-rw-r--r--drivers/usb/host/ehci-mx6.c1
-rw-r--r--drivers/usb/host/ehci-mxs.c155
-rw-r--r--drivers/usb/host/ehci-tegra.c546
-rw-r--r--drivers/video/omap3_dss.c2
-rw-r--r--dts/Makefile3
-rw-r--r--helper.mk64
-rw-r--r--include/command.h2
-rw-r--r--include/config_fallbacks.h11
-rw-r--r--include/configs/am335x_evm.h85
-rw-r--r--include/configs/apx4devkit.h3
-rw-r--r--include/configs/at91rm9200ek.h3
-rw-r--r--include/configs/at91sam9260ek.h23
-rw-r--r--include/configs/at91sam9261ek.h19
-rw-r--r--include/configs/at91sam9263ek.h20
-rw-r--r--include/configs/at91sam9m10g45ek.h17
-rw-r--r--include/configs/at91sam9rlek.h3
-rw-r--r--include/configs/at91sam9x5ek.h12
-rw-r--r--include/configs/cardhu.h12
-rw-r--r--include/configs/cm_t35.h9
-rw-r--r--include/configs/colibri_t20_iris.h6
-rw-r--r--include/configs/dalmore.h9
-rw-r--r--include/configs/dra7xx_evm.h36
-rw-r--r--include/configs/ea20.h1
-rw-r--r--include/configs/harmony.h8
-rw-r--r--include/configs/igep00x0.h7
-rw-r--r--include/configs/m28evk.h5
-rw-r--r--include/configs/medcom-wide.h5
-rw-r--r--include/configs/mx23_olinuxino.h64
-rw-r--r--include/configs/mx23evk.h14
-rw-r--r--include/configs/mx28evk.h4
-rw-r--r--include/configs/mx6_common.h23
-rw-r--r--include/configs/mx6qarm2.h3
-rw-r--r--include/configs/mx6qsabre_common.h4
-rw-r--r--include/configs/mx6qsabrelite.h4
-rw-r--r--include/configs/nitrogen6x.h285
-rw-r--r--include/configs/ns9750dev.h187
-rw-r--r--include/configs/omap3_beagle.h3
-rw-r--r--include/configs/omap3_mvblx.h25
-rw-r--r--include/configs/omap4_common.h2
-rw-r--r--include/configs/omap5_common.h262
-rw-r--r--include/configs/omap5_evm.h240
-rw-r--r--include/configs/paz00.h8
-rw-r--r--include/configs/pcm051.h2
-rw-r--r--include/configs/plutux.h5
-rw-r--r--include/configs/sc_sps_1.h3
-rw-r--r--include/configs/seaboard.h8
-rw-r--r--include/configs/tec.h5
-rw-r--r--include/configs/tegra-common.h22
-rw-r--r--include/configs/tegra114-common.h3
-rw-r--r--include/configs/tegra20-common.h12
-rw-r--r--include/configs/tegra30-common.h6
-rw-r--r--include/configs/trimslice.h8
-rw-r--r--include/configs/ventana.h8
-rw-r--r--include/configs/whistler.h8
-rw-r--r--include/configs/zynq.h5
-rw-r--r--include/env_callback.h9
-rw-r--r--include/fdtdec.h3
-rw-r--r--include/lcd.h1
-rw-r--r--include/linker_lists.h252
-rw-r--r--include/mmc.h2
-rw-r--r--include/ns9750_bbus.h125
-rw-r--r--include/ns9750_mem.h172
-rw-r--r--include/ns9750_ser.h202
-rw-r--r--include/ns9750_sys.h215
-rw-r--r--include/spl.h3
-rw-r--r--lib/fdtdec.c3
-rw-r--r--nand_spl/board/freescale/mpc8536ds/Makefile7
-rw-r--r--nand_spl/board/freescale/mpc8569mds/Makefile7
-rw-r--r--nand_spl/board/freescale/mpc8572ds/Makefile7
-rw-r--r--nand_spl/board/freescale/mx31pdk/Makefile7
-rw-r--r--nand_spl/board/freescale/mx31pdk/u-boot.lds2
-rw-r--r--nand_spl/board/freescale/p1010rdb/Makefile7
-rw-r--r--nand_spl/board/freescale/p1023rds/Makefile7
-rw-r--r--nand_spl/board/freescale/p1_p2_rdb/Makefile7
-rw-r--r--nand_spl/board/karo/tx25/Makefile7
-rw-r--r--nand_spl/board/karo/tx25/u-boot.lds2
-rw-r--r--nand_spl/board/samsung/smdk6400/u-boot.lds2
-rw-r--r--spl/.gitignore1
-rw-r--r--spl/Makefile10
486 files changed, 15588 insertions, 10407 deletions
diff --git a/.gitignore b/.gitignore
index e40eb7b..be09894 100644
--- a/.gitignore
+++ b/.gitignore
@@ -44,7 +44,6 @@
/u-boot.dtb
/u-boot.sb
/u-boot.geany
-/include/u-boot.lst
#
# Generated files
diff --git a/MAINTAINERS b/MAINTAINERS
index 6b1f657..d031c3a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -606,6 +606,7 @@ Enric Balletbo i Serra <eballetbo@iseebcn.com>
igep0020 ARM ARMV7 (OMAP3xx SoC)
igep0030 ARM ARMV7 (OMAP3xx SoC)
+ igep0032 ARM ARMV7 (OMAP3xx SoC)
Eric Benard <eric@eukrea.com>
@@ -974,6 +975,8 @@ Tom Warren <twarren@nvidia.com>
harmony Tegra20 (ARM7 & A9 Dual Core)
seaboard Tegra20 (ARM7 & A9 Dual Core)
+ cardhu Tegra30 (ARM7 & A9 Quad Core)
+ dalmore Tegra114 (ARM7 & A15 Quad Core)
Tom Warren <twarren@nvidia.com>
Stephen Warren <swarren@nvidia.com>
@@ -1035,6 +1038,14 @@ Pali Rohár <pali.rohar@gmail.com>
nokia_rx51 ARM ARMV7 (OMAP34xx SoC)
+Eric Nelson <eric.nelson@boundarydevices.com>
+ nitrogen6dl i.MX6DL 1GB
+ nitrogen6dl2g i.MX6DL 2GB
+ nitrogen6q i.MX6Q/6D 1GB
+ nitrogen6q2g i.MX6Q/6D 2GB
+ nitrogen6s i.MX6S 512MB
+ nitrogen6s1g i.MX6S 1GB
+
-------------------------------------------------------------------------
Unknown / orphaned boards:
diff --git a/Makefile b/Makefile
index 55bd55c..12763ce 100644
--- a/Makefile
+++ b/Makefile
@@ -464,8 +464,8 @@ $(obj)u-boot.img: $(obj)u-boot.bin
sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \
-d $< $@
-$(OBJTREE)/u-boot.imx : $(obj)u-boot.bin $(SUBDIR_TOOLS) depend
- $(MAKE) -C $(SRCTREE)/arch/arm/imx-common $@
+$(obj)u-boot.imx: $(obj)u-boot.bin depend
+ $(MAKE) -C $(SRCTREE)/arch/arm/imx-common $(OBJTREE)/u-boot.imx
$(obj)u-boot.kwb: $(obj)u-boot.bin
$(obj)tools/mkimage -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \
@@ -556,10 +556,8 @@ GEN_UBOOT = \
$(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map -o u-boot
else
GEN_UBOOT = \
- UNDEF_LST=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
- sed -n -e 's/.*\($(SYM_PREFIX)_u_boot_list_.*\)/-u\1/p'|sort|uniq`;\
cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \
- $$UNDEF_LST $(__OBJS) \
+ $(__OBJS) \
--start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
-Map u-boot.map -o u-boot
endif
@@ -592,11 +590,7 @@ $(SUBDIR_EXAMPLES): $(obj)u-boot
$(LDSCRIPT): depend
$(MAKE) -C $(dir $@) $(notdir $@)
-# The following line expands into whole rule which generates u-boot.lst,
-# the file containing u-boots LG-array linker section. This is included into
-# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
-$(eval $(call make_u_boot_list, $(obj)include/u-boot.lst, $(LIBBOARD) $(LIBS)))
-$(obj)u-boot.lds: $(LDSCRIPT) $(obj)include/u-boot.lst
+$(obj)u-boot.lds: $(LDSCRIPT)
$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$< >$@
nand_spl: $(TIMESTAMP_FILE) $(VERSION_FILE) depend
@@ -832,7 +826,6 @@ clean:
$(obj)board/matrix_vision/*/bootscript.img \
$(obj)board/voiceblue/eeprom \
$(obj)u-boot.lds \
- $(obj)include/u-boot.lst \
$(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs] \
$(obj)arch/blackfin/cpu/init.{lds,elf}
@rm -f $(obj)include/bmp_logo.h
@@ -870,7 +863,7 @@ clobber: tidy
@rm -f $(obj)nand_spl/{u-boot.{lds,lst},System.map}
@rm -f $(obj)nand_spl/{u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map}
@rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.map}
- @rm -f $(obj)spl/{u-boot-spl.lds,u-boot.lst}
+ @rm -f $(obj)spl/u-boot-spl.lds
@rm -f $(obj)MLO MLO.byteswap
@rm -f $(obj)SPL
@rm -f $(obj)tools/xway-swap-bytes
diff --git a/README b/README
index a620f0a..7f2506a 100644
--- a/README
+++ b/README
@@ -485,6 +485,16 @@ The following options need to be configured:
Thumb2 this flag will result in Thumb2 code generated by
GCC.
+ CONFIG_ARM_ERRATA_742230
+ CONFIG_ARM_ERRATA_743622
+ CONFIG_ARM_ERRATA_751472
+
+ If set, the workarounds for these ARM errata are applied early
+ during U-Boot startup. Note that these options force the
+ workarounds to be applied; no CPU-type/version detection
+ exists, unlike the similar options in the Linux kernel. Do not
+ set these options unless they apply!
+
- Linux Kernel Interface:
CONFIG_CLOCKS_IN_MHZ
@@ -1533,6 +1543,17 @@ CBFS (Coreboot Filesystem) support
allows for a "silent" boot where a splash screen is
loaded very quickly after power-on.
+ CONFIG_SPLASHIMAGE_GUARD
+
+ If this option is set, then U-Boot will prevent the environment
+ variable "splashimage" from being set to a problematic address
+ (see README.displaying-bmps and README.arm-unaligned-accesses).
+ This option is useful for targets where, due to alignment
+ restrictions, an improperly aligned BMP image will cause a data
+ abort. If you think you will not have problems with unaligned
+ accesses (for example because your toolchain prevents them)
+ there is no need to set this option.
+
CONFIG_SPLASH_SCREEN_ALIGN
If this option is set the splash image can be freely positioned
@@ -1553,6 +1574,14 @@ CBFS (Coreboot Filesystem) support
=> vertically centered image
at x = dspWidth - bmpWidth - 9
+ CONFIG_SPLASH_SCREEN_PREPARE
+
+ If this option is set then the board_splash_screen_prepare()
+ function, which must be defined in your code, is called as part
+ of the splash screen display sequence. It gives the board an
+ opportunity to prepare the splash image data before it is
+ processed and sent to the frame buffer by U-Boot.
+
- Gzip compressed BMP image support: CONFIG_VIDEO_BMP_GZIP
If this option is set, additionally to standard BMP
diff --git a/arch/arm/cpu/arm1136/mx35/generic.c b/arch/arm/cpu/arm1136/mx35/generic.c
index d11e6f6..46f4b64 100644
--- a/arch/arm/cpu/arm1136/mx35/generic.c
+++ b/arch/arm/cpu/arm1136/mx35/generic.c
@@ -519,7 +519,7 @@ u32 spl_boot_device(void)
case RCSR_MEM_TYPE_NOR:
return BOOT_DEVICE_NOR;
case RCSR_MEM_TYPE_ONENAND:
- return BOOT_DEVICE_ONE_NAND;
+ return BOOT_DEVICE_ONENAND;
default:
return BOOT_DEVICE_NONE;
}
diff --git a/arch/arm/cpu/arm720t/tegra114/cpu.c b/arch/arm/cpu/arm720t/tegra114/cpu.c
index 5962e15..6a94179 100644
--- a/arch/arm/cpu/arm720t/tegra114/cpu.c
+++ b/arch/arm/cpu/arm720t/tegra114/cpu.c
@@ -201,6 +201,7 @@ void t114_init_clocks(void)
reset_set_enable(PERIPH_ID_MSELECT, 0);
reset_set_enable(PERIPH_ID_EMC1, 0);
reset_set_enable(PERIPH_ID_MC1, 0);
+ reset_set_enable(PERIPH_ID_DVFS, 0);
debug("t114_init_clocks exit\n");
}
@@ -269,6 +270,8 @@ void powerup_cpus(void)
void start_cpu(u32 reset_vector)
{
+ u32 imme, inst;
+
debug("start_cpu entry, reset_vector = %x\n", reset_vector);
t114_init_clocks();
@@ -285,12 +288,38 @@ void start_cpu(u32 reset_vector)
/* Take CPU(s) out of reset */
remove_cpu_resets();
+ /* Set the entry point for CPU execution from reset */
+
/*
- * Set the entry point for CPU execution from reset,
- * if it's a non-zero value.
+ * A01P with patched boot ROM; vector hard-coded to 0x4003fffc.
+ * See nvbug 1193357 for details.
*/
- if (reset_vector)
- writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR);
+
+ /* mov r0, #lsb(reset_vector) */
+ imme = reset_vector & 0xffff;
+ inst = imme & 0xfff;
+ inst |= ((imme >> 12) << 16);
+ inst |= 0xe3000000;
+ writel(inst, 0x4003fff0);
+
+ /* movt r0, #msb(reset_vector) */
+ imme = (reset_vector >> 16) & 0xffff;
+ inst = imme & 0xfff;
+ inst |= ((imme >> 12) << 16);
+ inst |= 0xe3400000;
+ writel(inst, 0x4003fff4);
+
+ /* bx r0 */
+ writel(0xe12fff10, 0x4003fff8);
+
+ /* b -12 */
+ imme = (u32)-20;
+ inst = (imme >> 2) & 0xffffff;
+ inst |= 0xea000000;
+ writel(inst, 0x4003fffc);
+
+ /* Write to orignal location for compatibility */
+ writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR);
/* If the CPU(s) don't already have power, power 'em up */
powerup_cpus();
diff --git a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
index 25d2a32..e483820 100644
--- a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
+++ b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
@@ -51,7 +51,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = ALIGN(4);
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c
index 0448c0b..9218546 100644
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c
+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c
@@ -61,20 +61,20 @@ char *get_cpu_name()
if (cpu_is_at91sam9x5()) {
switch (extension_id) {
case ARCH_EXID_AT91SAM9G15:
- return CONFIG_SYS_AT91_G15_CPU_NAME;
+ return "AT91SAM9G15";
case ARCH_EXID_AT91SAM9G25:
- return CONFIG_SYS_AT91_G25_CPU_NAME;
+ return "AT91SAM9G25";
case ARCH_EXID_AT91SAM9G35:
- return CONFIG_SYS_AT91_G35_CPU_NAME;
+ return "AT91SAM9G35";
case ARCH_EXID_AT91SAM9X25:
- return CONFIG_SYS_AT91_X25_CPU_NAME;
+ return "AT91SAM9X25";
case ARCH_EXID_AT91SAM9X35:
- return CONFIG_SYS_AT91_X35_CPU_NAME;
+ return "AT91SAM9X35";
default:
- return CONFIG_SYS_AT91_UNKNOWN_CPU;
+ return "Unknown CPU type";
}
} else {
- return CONFIG_SYS_AT91_UNKNOWN_CPU;
+ return "Unknown CPU type";
}
}
@@ -246,14 +246,14 @@ void at91_macb_hw_init(void)
#ifndef CONFIG_RMII
/* Only emac0 support MII */
if (has_emac0()) {
- at91_set_b_periph(AT91_PIO_PORTB, 16, 0); /* ECRS */
- at91_set_b_periph(AT91_PIO_PORTB, 17, 0); /* ECOL */
- at91_set_b_periph(AT91_PIO_PORTB, 13, 0); /* ERX2 */
- at91_set_b_periph(AT91_PIO_PORTB, 14, 0); /* ERX3 */
- at91_set_b_periph(AT91_PIO_PORTB, 15, 0); /* ERXCK */
- at91_set_b_periph(AT91_PIO_PORTB, 11, 0); /* ETX2 */
- at91_set_b_periph(AT91_PIO_PORTB, 12, 0); /* ETX3 */
- at91_set_b_periph(AT91_PIO_PORTB, 8, 0); /* ETXER */
+ at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* ECRS */
+ at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* ECOL */
+ at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ERX2 */
+ at91_set_a_periph(AT91_PIO_PORTB, 14, 0); /* ERX3 */
+ at91_set_a_periph(AT91_PIO_PORTB, 15, 0); /* ERXCK */
+ at91_set_a_periph(AT91_PIO_PORTB, 11, 0); /* ETX2 */
+ at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX3 */
+ at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ETXER */
}
#endif
}
diff --git a/arch/arm/cpu/arm926ejs/config.mk b/arch/arm/cpu/arm926ejs/config.mk
index 47f24f5..6a3a1bb 100644
--- a/arch/arm/cpu/arm926ejs/config.mk
+++ b/arch/arm/cpu/arm926ejs/config.mk
@@ -34,6 +34,6 @@ PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT)
ifneq ($(CONFIG_IMX_CONFIG),)
-ALL-y += $(OBJTREE)/u-boot.imx
+ALL-y += $(obj)u-boot.imx
endif
diff --git a/arch/arm/cpu/arm926ejs/mxs/clock.c b/arch/arm/cpu/arm926ejs/mxs/clock.c
index 00b9aba..43e7663 100644
--- a/arch/arm/cpu/arm926ejs/mxs/clock.c
+++ b/arch/arm/cpu/arm926ejs/mxs/clock.c
@@ -289,7 +289,8 @@ static uint32_t mxs_get_sspclk(enum mxs_sspclock ssp)
void mxs_set_ssp_busclock(unsigned int bus, uint32_t freq)
{
struct mxs_ssp_regs *ssp_regs;
- const uint32_t sspclk = mxs_get_sspclk(bus);
+ const enum mxs_sspclock clk = mxs_ssp_clock_by_bus(bus);
+ const uint32_t sspclk = mxs_get_sspclk(clk);
uint32_t reg;
uint32_t divide, rate, tgtclk;
diff --git a/arch/arm/cpu/arm926ejs/mxs/mxs_init.h b/arch/arm/cpu/arm926ejs/mxs/mxs_init.h
index 2ddc5bc..084def5 100644
--- a/arch/arm/cpu/arm926ejs/mxs/mxs_init.h
+++ b/arch/arm/cpu/arm926ejs/mxs/mxs_init.h
@@ -30,7 +30,7 @@ void early_delay(int delay);
void mxs_power_init(void);
-#ifdef CONFIG_SPL_MX28_PSWITCH_WAIT
+#ifdef CONFIG_SPL_MXS_PSWITCH_WAIT
void mxs_power_wait_pswitch(void);
#else
static inline void mxs_power_wait_pswitch(void) { }
diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
index f8392f6..fdac73c 100644
--- a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
+++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
@@ -27,6 +27,7 @@
#include <config.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
#include <linux/compiler.h>
#include "mxs_init.h"
@@ -119,6 +120,10 @@ static void initialize_dram_values(void)
writel(dram_vals[i], MXS_DRAM_BASE + (4 * i));
#ifdef CONFIG_MX23
+ /*
+ * Enable tRAS lockout in HW_DRAM_CTL08 ; it must be the last
+ * element to be set
+ */
writel((1 << 24), MXS_DRAM_BASE + (4 * 8));
#endif
}
@@ -229,7 +234,7 @@ static void mx23_mem_setup_vddmem(void)
struct mxs_power_regs *power_regs =
(struct mxs_power_regs *)MXS_POWER_BASE;
- writel((0x12 << POWER_VDDMEMCTRL_TRG_OFFSET) |
+ writel((0x10 << POWER_VDDMEMCTRL_TRG_OFFSET) |
POWER_VDDMEMCTRL_ENABLE_ILIMIT |
POWER_VDDMEMCTRL_ENABLE_LINREG |
POWER_VDDMEMCTRL_PULLDOWN_ACTIVE,
@@ -237,13 +242,20 @@ static void mx23_mem_setup_vddmem(void)
early_delay(10000);
- writel((0x12 << POWER_VDDMEMCTRL_TRG_OFFSET) |
+ writel((0x10 << POWER_VDDMEMCTRL_TRG_OFFSET) |
POWER_VDDMEMCTRL_ENABLE_LINREG,
&power_regs->hw_power_vddmemctrl);
}
static void mx23_mem_init(void)
{
+ /*
+ * Reset/ungate the EMI block. This is essential, otherwise the system
+ * suffers from memory instability. This thing is mx23 specific and is
+ * no longer present on mx28.
+ */
+ mxs_reset_block((struct mxs_register_32 *)MXS_EMI_BASE);
+
mx23_mem_setup_vddmem();
/*
diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c
index e9d6302..287c698 100644
--- a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c
+++ b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c
@@ -921,7 +921,7 @@ void mxs_power_init(void)
early_delay(1000);
}
-#ifdef CONFIG_SPL_MX28_PSWITCH_WAIT
+#ifdef CONFIG_SPL_MXS_PSWITCH_WAIT
void mxs_power_wait_pswitch(void)
{
struct mxs_power_regs *power_regs =
diff --git a/arch/arm/cpu/arm926ejs/mxs/timer.c b/arch/arm/cpu/arm926ejs/mxs/timer.c
index 3738411..2039106 100644
--- a/arch/arm/cpu/arm926ejs/mxs/timer.c
+++ b/arch/arm/cpu/arm926ejs/mxs/timer.c
@@ -32,7 +32,11 @@
#include <asm/arch/sys_proto.h>
/* Maximum fixed count */
-#define TIMER_LOAD_VAL 0xffffffff
+#if defined(CONFIG_MX23)
+#define TIMER_LOAD_VAL 0xffff
+#elif defined(CONFIG_MX28)
+#define TIMER_LOAD_VAL 0xffffffff
+#endif
DECLARE_GLOBAL_DATA_PTR;
@@ -42,22 +46,22 @@ DECLARE_GLOBAL_DATA_PTR;
/*
* This driver uses 1kHz clock source.
*/
-#define MX28_INCREMENTER_HZ 1000
+#define MXS_INCREMENTER_HZ 1000
static inline unsigned long tick_to_time(unsigned long tick)
{
- return tick / (MX28_INCREMENTER_HZ / CONFIG_SYS_HZ);
+ return tick / (MXS_INCREMENTER_HZ / CONFIG_SYS_HZ);
}
static inline unsigned long time_to_tick(unsigned long time)
{
- return time * (MX28_INCREMENTER_HZ / CONFIG_SYS_HZ);
+ return time * (MXS_INCREMENTER_HZ / CONFIG_SYS_HZ);
}
/* Calculate how many ticks happen in "us" microseconds */
static inline unsigned long us_to_tick(unsigned long us)
{
- return (us * MX28_INCREMENTER_HZ) / 1000000;
+ return (us * MXS_INCREMENTER_HZ) / 1000000;
}
int timer_init(void)
@@ -69,7 +73,11 @@ int timer_init(void)
mxs_reset_block(&timrot_regs->hw_timrot_rotctrl_reg);
/* Set fixed_count to 0 */
+#if defined(CONFIG_MX23)
+ writel(0, &timrot_regs->hw_timrot_timcount0);
+#elif defined(CONFIG_MX28)
writel(0, &timrot_regs->hw_timrot_fixed_count0);
+#endif
/* Set UPDATE bit and 1Khz frequency */
writel(TIMROT_TIMCTRLn_UPDATE | TIMROT_TIMCTRLn_RELOAD |
@@ -77,7 +85,11 @@ int timer_init(void)
&timrot_regs->hw_timrot_timctrl0);
/* Set fixed_count to maximal value */
+#if defined(CONFIG_MX23)
+ writel(TIMER_LOAD_VAL - 1, &timrot_regs->hw_timrot_timcount0);
+#elif defined(CONFIG_MX28)
writel(TIMER_LOAD_VAL, &timrot_regs->hw_timrot_fixed_count0);
+#endif
return 0;
}
@@ -86,9 +98,16 @@ unsigned long long get_ticks(void)
{
struct mxs_timrot_regs *timrot_regs =
(struct mxs_timrot_regs *)MXS_TIMROT_BASE;
+ uint32_t now;
/* Current tick value */
- uint32_t now = readl(&timrot_regs->hw_timrot_running_count0);
+#if defined(CONFIG_MX23)
+ /* Upper bits are the valid ones. */
+ now = readl(&timrot_regs->hw_timrot_timcount0) >>
+ TIMROT_RUNNING_COUNTn_RUNNING_COUNT_OFFSET;
+#elif defined(CONFIG_MX28)
+ now = readl(&timrot_regs->hw_timrot_running_count0);
+#endif
if (lastdec >= now) {
/*
@@ -117,17 +136,17 @@ ulong get_timer(ulong base)
}
/* We use the HW_DIGCTL_MICROSECONDS register for sub-millisecond timer. */
-#define MX28_HW_DIGCTL_MICROSECONDS 0x8001c0c0
+#define MXS_HW_DIGCTL_MICROSECONDS 0x8001c0c0
void __udelay(unsigned long usec)
{
uint32_t old, new, incr;
uint32_t counter = 0;
- old = readl(MX28_HW_DIGCTL_MICROSECONDS);
+ old = readl(MXS_HW_DIGCTL_MICROSECONDS);
while (counter < usec) {
- new = readl(MX28_HW_DIGCTL_MICROSECONDS);
+ new = readl(MXS_HW_DIGCTL_MICROSECONDS);
/* Check if the timer wrapped. */
if (new < old) {
@@ -152,5 +171,5 @@ void __udelay(unsigned long usec)
ulong get_tbclk(void)
{
- return MX28_INCREMENTER_HZ;
+ return MXS_INCREMENTER_HZ;
}
diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
index fc0418a..67b204e 100644
--- a/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
+++ b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
@@ -51,12 +51,6 @@ SECTIONS
. = ALIGN(4);
- .u_boot_list : {
- #include <u-boot.lst>
- }
-
- . = ALIGN(4);
-
.rel.dyn : {
__rel_dyn_start = .;
*(.rel*)
diff --git a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
index cff660a..7405917 100644
--- a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
+++ b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
@@ -51,12 +51,6 @@ SECTIONS
. = ALIGN(4);
- .u_boot_list : {
- #include <u-boot.lst>
- }
-
- . = ALIGN(4);
-
.rel.dyn : {
__rel_dyn_start = .;
*(.rel*)
diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
index ee8c2b3..4668b3c 100644
--- a/arch/arm/cpu/armv7/Makefile
+++ b/arch/arm/cpu/armv7/Makefile
@@ -32,7 +32,7 @@ COBJS += cache_v7.o
COBJS += cpu.o
COBJS += syslib.o
-ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA),)
+ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6),)
SOBJS += lowlevel_init.o
endif
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index ab31326..e35a3e3 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -56,11 +56,11 @@ int cpu_mmc_init(bd_t *bis)
{
int ret;
- ret = omap_mmc_init(0, 0, 0);
+ ret = omap_mmc_init(0, 0, 0, -1, -1);
if (ret)
return ret;
- return omap_mmc_init(1, 0, 0);
+ return omap_mmc_init(1, 0, 0, -1, -1);
}
#endif
diff --git a/arch/arm/cpu/armv7/am33xx/ddr.c b/arch/arm/cpu/armv7/am33xx/ddr.c
index fd9fc4a..448cc40 100644
--- a/arch/arm/cpu/armv7/am33xx/ddr.c
+++ b/arch/arm/cpu/armv7/am33xx/ddr.c
@@ -45,13 +45,19 @@ static struct ddr_cmdtctrl *ioctrl_reg = {
*/
void config_sdram(const struct emif_regs *regs)
{
- writel(regs->ref_ctrl, &emif_reg->emif_sdram_ref_ctrl);
- writel(regs->ref_ctrl, &emif_reg->emif_sdram_ref_ctrl_shdw);
- if (regs->zq_config){
+ if (regs->zq_config) {
+ /*
+ * A value of 0x2800 for the REF CTRL will give us
+ * about 570us for a delay, which will be long enough
+ * to configure things.
+ */
+ writel(0x2800, &emif_reg->emif_sdram_ref_ctrl);
writel(regs->zq_config, &emif_reg->emif_zq_config);
writel(regs->sdram_config, &cstat->secure_emif_sdram_config);
}
writel(regs->sdram_config, &emif_reg->emif_sdram_config);
+ writel(regs->ref_ctrl, &emif_reg->emif_sdram_ref_ctrl);
+ writel(regs->ref_ctrl, &emif_reg->emif_sdram_ref_ctrl_shdw);
}
/**
diff --git a/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds b/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds
new file mode 100644
index 0000000..b6a929f
--- /dev/null
+++ b/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds
@@ -0,0 +1,67 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ * Aneesh V <aneesh@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\
+ LENGTH = CONFIG_SPL_MAX_SIZE }
+MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \
+ LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ .text :
+ {
+ __start = .;
+ arch/arm/cpu/armv7/start.o (.text)
+ *(.text*)
+ } >.sram
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram
+
+ . = ALIGN(4);
+ .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
+
+ .u_boot_list : {
+ KEEP(*(SORT(.u_boot_list*)));
+ } >.sram
+
+ . = ALIGN(4);
+ __image_copy_end = .;
+ _end = .;
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start = .;
+ *(.bss*)
+ . = ALIGN(4);
+ __bss_end = .;
+ } >.sdram
+}
diff --git a/arch/arm/cpu/armv7/config.mk b/arch/arm/cpu/armv7/config.mk
index 350e946..9c3e2f3 100644
--- a/arch/arm/cpu/armv7/config.mk
+++ b/arch/arm/cpu/armv7/config.mk
@@ -40,5 +40,5 @@ PF_NO_UNALIGNED := $(call cc-option, -mno-unaligned-access,)
PLATFORM_NO_UNALIGNED := $(PF_NO_UNALIGNED)
ifneq ($(CONFIG_IMX_CONFIG),)
-ALL-y += $(OBJTREE)/u-boot.imx
+ALL-y += $(obj)u-boot.imx
endif
diff --git a/arch/arm/cpu/armv7/mx6/Makefile b/arch/arm/cpu/armv7/mx6/Makefile
index cbce411..4f9ca68 100644
--- a/arch/arm/cpu/armv7/mx6/Makefile
+++ b/arch/arm/cpu/armv7/mx6/Makefile
@@ -28,7 +28,6 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).o
COBJS = soc.o clock.o
-SOBJS = lowlevel_init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index a8aad5d..193ba12 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -30,6 +30,7 @@
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <asm/imx-common/boot_mode.h>
+#include <stdbool.h>
struct scu_regs {
u32 ctrl;
@@ -121,12 +122,23 @@ void set_vddsoc(u32 mv)
writel(reg, &anatop->reg_core);
}
+static void imx_set_wdog_powerdown(bool enable)
+{
+ struct wdog_regs *wdog1 = (struct wdog_regs *)WDOG1_BASE_ADDR;
+ struct wdog_regs *wdog2 = (struct wdog_regs *)WDOG2_BASE_ADDR;
+
+ /* Write to the PDE (Power Down Enable) bit */
+ writew(enable, &wdog1->wmcr);
+ writew(enable, &wdog2->wmcr);
+}
+
int arch_cpu_init(void)
{
init_aips();
set_vddsoc(1200); /* Set VDDSOC to 1.2V */
+ imx_set_wdog_powerdown(false); /* Disable PDE bit of WMCR register */
return 0;
}
@@ -193,3 +205,7 @@ const struct boot_mode soc_boot_modes[] = {
{"esdhc4", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)},
{NULL, 0},
};
+
+void s_init(void)
+{
+}
diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c
index 2b584e0..24cbe2d 100644
--- a/arch/arm/cpu/armv7/omap-common/boot-common.c
+++ b/arch/arm/cpu/armv7/omap-common/boot-common.c
@@ -55,17 +55,20 @@ void spl_board_init(void)
#ifdef CONFIG_SPL_NAND_SUPPORT
gpmc_init();
#endif
+#if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW_SUPPORT)
+ arch_misc_init();
+#endif
}
int board_mmc_init(bd_t *bis)
{
switch (spl_boot_device()) {
case BOOT_DEVICE_MMC1:
- omap_mmc_init(0, 0, 0);
+ omap_mmc_init(0, 0, 0, -1, -1);
break;
case BOOT_DEVICE_MMC2:
case BOOT_DEVICE_MMC2_2:
- omap_mmc_init(1, 0, 0);
+ omap_mmc_init(1, 0, 0, -1, -1);
break;
}
return 0;
diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c
index b1fd277..9ed1899 100644
--- a/arch/arm/cpu/armv7/omap-common/clocks-common.c
+++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c
@@ -36,6 +36,7 @@
#include <asm/arch/sys_proto.h>
#include <asm/utils.h>
#include <asm/omap_gpio.h>
+#include <asm/emif.h>
#ifndef CONFIG_SPL_BUILD
/*
@@ -46,9 +47,20 @@
#define puts(s)
#endif
+const u32 sys_clk_array[8] = {
+ 12000000, /* 12 MHz */
+ 13000000, /* 13 MHz */
+ 16800000, /* 16.8 MHz */
+ 19200000, /* 19.2 MHz */
+ 26000000, /* 26 MHz */
+ 27000000, /* 27 MHz */
+ 38400000, /* 38.4 MHz */
+ 20000000, /* 20 MHz */
+};
+
static inline u32 __get_sys_clk_index(void)
{
- u32 ind;
+ s8 ind;
/*
* For ES1 the ROM code calibration of sys clock is not reliable
* due to hw issue. So, use hard-coded value. If this value is not
@@ -60,8 +72,15 @@ static inline u32 __get_sys_clk_index(void)
ind = OMAP_SYS_CLK_IND_38_4_MHZ;
else {
/* SYS_CLKSEL - 1 to match the dpll param array indices */
- ind = (readl(&prcm->cm_sys_clksel) &
+ ind = (readl((*prcm)->cm_sys_clksel) &
CM_SYS_CLKSEL_SYS_CLKSEL_MASK) - 1;
+ /*
+ * SYS_CLKSEL value for 20MHz is 0. This is introduced newly
+ * in DRA7XX socs. SYS_CLKSEL -1 will be greater than
+ * NUM_SYS_CLK. So considering the last 3 bits as the index
+ * for the dpll param array.
+ */
+ ind &= CM_SYS_CLKSEL_SYS_CLKSEL_MASK;
}
return ind;
}
@@ -75,7 +94,34 @@ u32 get_sys_clk_freq(void)
return sys_clk_array[index];
}
-static inline void do_bypass_dpll(u32 *const base)
+void setup_post_dividers(u32 const base, const struct dpll_params *params)
+{
+ struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
+
+ /* Setup post-dividers */
+ if (params->m2 >= 0)
+ writel(params->m2, &dpll_regs->cm_div_m2_dpll);
+ if (params->m3 >= 0)
+ writel(params->m3, &dpll_regs->cm_div_m3_dpll);
+ if (params->m4_h11 >= 0)
+ writel(params->m4_h11, &dpll_regs->cm_div_m4_h11_dpll);
+ if (params->m5_h12 >= 0)
+ writel(params->m5_h12, &dpll_regs->cm_div_m5_h12_dpll);
+ if (params->m6_h13 >= 0)
+ writel(params->m6_h13, &dpll_regs->cm_div_m6_h13_dpll);
+ if (params->m7_h14 >= 0)
+ writel(params->m7_h14, &dpll_regs->cm_div_m7_h14_dpll);
+ if (params->h21 >= 0)
+ writel(params->h21, &dpll_regs->cm_div_h21_dpll);
+ if (params->h22 >= 0)
+ writel(params->h22, &dpll_regs->cm_div_h22_dpll);
+ if (params->h23 >= 0)
+ writel(params->h23, &dpll_regs->cm_div_h23_dpll);
+ if (params->h24 >= 0)
+ writel(params->h24, &dpll_regs->cm_div_h24_dpll);
+}
+
+static inline void do_bypass_dpll(u32 const base)
{
struct dpll_regs *dpll_regs = (struct dpll_regs *)base;
@@ -85,17 +131,17 @@ static inline void do_bypass_dpll(u32 *const base)
CM_CLKMODE_DPLL_EN_SHIFT);
}
-static inline void wait_for_bypass(u32 *const base)
+static inline void wait_for_bypass(u32 const base)
{
struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
if (!wait_on_value(ST_DPLL_CLK_MASK, 0, &dpll_regs->cm_idlest_dpll,
LDELAY)) {
- printf("Bypassing DPLL failed %p\n", base);
+ printf("Bypassing DPLL failed %x\n", base);
}
}
-static inline void do_lock_dpll(u32 *const base)
+static inline void do_lock_dpll(u32 const base)
{
struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
@@ -104,18 +150,18 @@ static inline void do_lock_dpll(u32 *const base)
DPLL_EN_LOCK << CM_CLKMODE_DPLL_EN_SHIFT);
}
-static inline void wait_for_lock(u32 *const base)
+static inline void wait_for_lock(u32 const base)
{
struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
if (!wait_on_value(ST_DPLL_CLK_MASK, ST_DPLL_CLK_MASK,
&dpll_regs->cm_idlest_dpll, LDELAY)) {
- printf("DPLL locking failed for %p\n", base);
+ printf("DPLL locking failed for %x\n", base);
hang();
}
}
-inline u32 check_for_lock(u32 *const base)
+inline u32 check_for_lock(u32 const base)
{
struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
u32 lock = readl(&dpll_regs->cm_idlest_dpll) & ST_DPLL_CLK_MASK;
@@ -123,12 +169,65 @@ inline u32 check_for_lock(u32 *const base)
return lock;
}
-static void do_setup_dpll(u32 *const base, const struct dpll_params *params,
+const struct dpll_params *get_mpu_dpll_params(struct dplls const *dpll_data)
+{
+ u32 sysclk_ind = get_sys_clk_index();
+ return &dpll_data->mpu[sysclk_ind];
+}
+
+const struct dpll_params *get_core_dpll_params(struct dplls const *dpll_data)
+{
+ u32 sysclk_ind = get_sys_clk_index();
+ return &dpll_data->core[sysclk_ind];
+}
+
+const struct dpll_params *get_per_dpll_params(struct dplls const *dpll_data)
+{
+ u32 sysclk_ind = get_sys_clk_index();
+ return &dpll_data->per[sysclk_ind];
+}
+
+const struct dpll_params *get_iva_dpll_params(struct dplls const *dpll_data)
+{
+ u32 sysclk_ind = get_sys_clk_index();
+ return &dpll_data->iva[sysclk_ind];
+}
+
+const struct dpll_params *get_usb_dpll_params(struct dplls const *dpll_data)
+{
+ u32 sysclk_ind = get_sys_clk_index();
+ return &dpll_data->usb[sysclk_ind];
+}
+
+const struct dpll_params *get_abe_dpll_params(struct dplls const *dpll_data)
+{
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+ u32 sysclk_ind = get_sys_clk_index();
+ return &dpll_data->abe[sysclk_ind];
+#else
+ return dpll_data->abe;
+#endif
+}
+
+static const struct dpll_params *get_ddr_dpll_params
+ (struct dplls const *dpll_data)
+{
+ u32 sysclk_ind = get_sys_clk_index();
+
+ if (!dpll_data->ddr)
+ return NULL;
+ return &dpll_data->ddr[sysclk_ind];
+}
+
+static void do_setup_dpll(u32 const base, const struct dpll_params *params,
u8 lock, char *dpll)
{
u32 temp, M, N;
struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
+ if (!params)
+ return;
+
temp = readl(&dpll_regs->cm_clksel_dpll);
if (check_for_lock(base)) {
@@ -183,7 +282,7 @@ u32 omap_ddr_clk(void)
omap_rev = omap_revision();
sys_clk_khz = get_sys_clk_freq() / 1000;
- core_dpll_params = get_core_dpll_params();
+ core_dpll_params = get_core_dpll_params(*dplls_data);
debug("sys_clk %d\n ", sys_clk_khz * 1000);
@@ -235,24 +334,19 @@ void configure_mpu_dpll(void)
*/
if ((omap_rev >= OMAP4460_ES1_0) && (omap_rev < OMAP5430_ES1_0)) {
mpu_dpll_regs =
- (struct dpll_regs *)&prcm->cm_clkmode_dpll_mpu;
- bypass_dpll(&prcm->cm_clkmode_dpll_mpu);
- clrbits_le32(&prcm->cm_mpu_mpu_clkctrl,
+ (struct dpll_regs *)((*prcm)->cm_clkmode_dpll_mpu);
+ bypass_dpll((*prcm)->cm_clkmode_dpll_mpu);
+ clrbits_le32((*prcm)->cm_mpu_mpu_clkctrl,
MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK);
- setbits_le32(&prcm->cm_mpu_mpu_clkctrl,
+ setbits_le32((*prcm)->cm_mpu_mpu_clkctrl,
MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK);
clrbits_le32(&mpu_dpll_regs->cm_clksel_dpll,
CM_CLKSEL_DCC_EN_MASK);
}
- setbits_le32(&prcm->cm_mpu_mpu_clkctrl,
- MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK);
- setbits_le32(&prcm->cm_mpu_mpu_clkctrl,
- MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK);
+ params = get_mpu_dpll_params(*dplls_data);
- params = get_mpu_dpll_params();
-
- do_setup_dpll(&prcm->cm_clkmode_dpll_mpu, params, DPLL_LOCK, "mpu");
+ do_setup_dpll((*prcm)->cm_clkmode_dpll_mpu, params, DPLL_LOCK, "mpu");
debug("MPU DPLL locked\n");
}
@@ -271,17 +365,17 @@ static void setup_usb_dpll(void)
* Use CLKINP in KHz and adjust the denominator accordingly so
* that we have enough accuracy and at the same time no overflow
*/
- params = get_usb_dpll_params();
+ params = get_usb_dpll_params(*dplls_data);
num = params->m * sys_clk_khz;
den = (params->n + 1) * 250 * 1000;
num += den - 1;
sd_div = num / den;
- clrsetbits_le32(&prcm->cm_clksel_dpll_usb,
+ clrsetbits_le32((*prcm)->cm_clksel_dpll_usb,
CM_CLKSEL_DPLL_DPLL_SD_DIV_MASK,
sd_div << CM_CLKSEL_DPLL_DPLL_SD_DIV_SHIFT);
/* Now setup the dpll with the regular function */
- do_setup_dpll(&prcm->cm_clkmode_dpll_usb, params, DPLL_LOCK, "usb");
+ do_setup_dpll((*prcm)->cm_clkmode_dpll_usb, params, DPLL_LOCK, "usb");
}
#endif
@@ -293,28 +387,28 @@ static void setup_dplls(void)
debug("setup_dplls\n");
/* CORE dpll */
- params = get_core_dpll_params(); /* default - safest */
+ params = get_core_dpll_params(*dplls_data); /* default - safest */
/*
* Do not lock the core DPLL now. Just set it up.
* Core DPLL will be locked after setting up EMIF
* using the FREQ_UPDATE method(freq_update_core())
*/
- if (omap_revision() != OMAP5432_ES1_0)
- do_setup_dpll(&prcm->cm_clkmode_dpll_core, params,
+ if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2)
+ do_setup_dpll((*prcm)->cm_clkmode_dpll_core, params,
DPLL_NO_LOCK, "core");
else
- do_setup_dpll(&prcm->cm_clkmode_dpll_core, params,
+ do_setup_dpll((*prcm)->cm_clkmode_dpll_core, params,
DPLL_LOCK, "core");
/* Set the ratios for CORE_CLK, L3_CLK, L4_CLK */
temp = (CLKSEL_CORE_X2_DIV_1 << CLKSEL_CORE_SHIFT) |
(CLKSEL_L3_CORE_DIV_2 << CLKSEL_L3_SHIFT) |
(CLKSEL_L4_L3_DIV_2 << CLKSEL_L4_SHIFT);
- writel(temp, &prcm->cm_clksel_core);
+ writel(temp, (*prcm)->cm_clksel_core);
debug("Core DPLL configured\n");
/* lock PER dpll */
- params = get_per_dpll_params();
- do_setup_dpll(&prcm->cm_clkmode_dpll_per,
+ params = get_per_dpll_params(*dplls_data);
+ do_setup_dpll((*prcm)->cm_clkmode_dpll_per,
params, DPLL_LOCK, "per");
debug("PER DPLL locked\n");
@@ -324,6 +418,9 @@ static void setup_dplls(void)
#ifdef CONFIG_USB_EHCI_OMAP
setup_usb_dpll();
#endif
+ params = get_ddr_dpll_params(*dplls_data);
+ do_setup_dpll((*prcm)->cm_clkmode_dpll_ddrphy,
+ params, DPLL_LOCK, "ddr");
}
#ifdef CONFIG_SYS_CLOCKS_ENABLE_ALL
@@ -333,14 +430,14 @@ static void setup_non_essential_dplls(void)
const struct dpll_params *params;
/* IVA */
- clrsetbits_le32(&prcm->cm_bypclk_dpll_iva,
+ clrsetbits_le32((*prcm)->cm_bypclk_dpll_iva,
CM_BYPCLK_DPLL_IVA_CLKSEL_MASK, DPLL_IVA_CLKSEL_CORE_X2_DIV_2);
- params = get_iva_dpll_params();
- do_setup_dpll(&prcm->cm_clkmode_dpll_iva, params, DPLL_LOCK, "iva");
+ params = get_iva_dpll_params(*dplls_data);
+ do_setup_dpll((*prcm)->cm_clkmode_dpll_iva, params, DPLL_LOCK, "iva");
/* Configure ABE dpll */
- params = get_abe_dpll_params();
+ params = get_abe_dpll_params(*dplls_data);
#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK;
#else
@@ -349,64 +446,65 @@ static void setup_non_essential_dplls(void)
* We need to enable some additional options to achieve
* 196.608MHz from 32768 Hz
*/
- setbits_le32(&prcm->cm_clkmode_dpll_abe,
+ setbits_le32((*prcm)->cm_clkmode_dpll_abe,
CM_CLKMODE_DPLL_DRIFTGUARD_EN_MASK|
CM_CLKMODE_DPLL_RELOCK_RAMP_EN_MASK|
CM_CLKMODE_DPLL_LPMODE_EN_MASK|
CM_CLKMODE_DPLL_REGM4XEN_MASK);
/* Spend 4 REFCLK cycles at each stage */
- clrsetbits_le32(&prcm->cm_clkmode_dpll_abe,
+ clrsetbits_le32((*prcm)->cm_clkmode_dpll_abe,
CM_CLKMODE_DPLL_RAMP_RATE_MASK,
1 << CM_CLKMODE_DPLL_RAMP_RATE_SHIFT);
#endif
/* Select the right reference clk */
- clrsetbits_le32(&prcm->cm_abe_pll_ref_clksel,
+ clrsetbits_le32((*prcm)->cm_abe_pll_ref_clksel,
CM_ABE_PLL_REF_CLKSEL_CLKSEL_MASK,
abe_ref_clk << CM_ABE_PLL_REF_CLKSEL_CLKSEL_SHIFT);
/* Lock the dpll */
- do_setup_dpll(&prcm->cm_clkmode_dpll_abe, params, DPLL_LOCK, "abe");
+ do_setup_dpll((*prcm)->cm_clkmode_dpll_abe, params, DPLL_LOCK, "abe");
}
#endif
-void do_scale_tps62361(int gpio, u32 reg, u32 volt_mv)
+u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic)
{
- u32 step;
- int ret = 0;
-
- /* See if we can first get the GPIO if needed */
- if (gpio >= 0)
- ret = gpio_request(gpio, "TPS62361_VSEL0_GPIO");
- if (ret < 0) {
- printf("%s: gpio %d request failed %d\n", __func__, gpio, ret);
- gpio = -1;
- }
-
- /* Pull the GPIO low to select SET0 register, while we program SET1 */
- if (gpio >= 0)
- gpio_direction_output(gpio, 0);
+ u32 offset_code;
- step = volt_mv - TPS62361_BASE_VOLT_MV;
- step /= 10;
+ volt_offset -= pmic->base_offset;
- debug("do_scale_tps62361: volt - %d step - 0x%x\n", volt_mv, step);
- if (omap_vc_bypass_send_value(TPS62361_I2C_SLAVE_ADDR, reg, step))
- puts("Scaling voltage failed for vdd_mpu from TPS\n");
+ offset_code = (volt_offset + pmic->step - 1) / pmic->step;
- /* Pull the GPIO high to select SET1 register */
- if (gpio >= 0)
- gpio_direction_output(gpio, 1);
+ /*
+ * Offset codes 1-6 all give the base voltage in Palmas
+ * Offset code 0 switches OFF the SMPS
+ */
+ return offset_code + pmic->start_code;
}
-void do_scale_vcore(u32 vcore_reg, u32 volt_mv)
+void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic)
{
u32 offset_code;
u32 offset = volt_mv;
+ int ret = 0;
+
+ /* See if we can first get the GPIO if needed */
+ if (pmic->gpio_en)
+ ret = gpio_request(pmic->gpio, "PMIC_GPIO");
+
+ if (ret < 0) {
+ printf("%s: gpio %d request failed %d\n", __func__,
+ pmic->gpio, ret);
+ return;
+ }
+
+ /* Pull the GPIO low to select SET0 register, while we program SET1 */
+ if (pmic->gpio_en)
+ gpio_direction_output(pmic->gpio, 0);
/* convert to uV for better accuracy in the calculations */
offset *= 1000;
- offset_code = get_offset_code(offset);
+ offset_code = get_offset_code(offset, pmic);
debug("do_scale_vcore: volt - %d offset_code - 0x%x\n", volt_mv,
offset_code);
@@ -414,16 +512,46 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv)
if (omap_vc_bypass_send_value(SMPS_I2C_SLAVE_ADDR,
vcore_reg, offset_code))
printf("Scaling voltage failed for 0x%x\n", vcore_reg);
+
+ if (pmic->gpio_en)
+ gpio_direction_output(pmic->gpio, 1);
+}
+
+/*
+ * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva
+ * We set the maximum voltages allowed here because Smart-Reflex is not
+ * enabled in bootloader. Voltage initialization in the kernel will set
+ * these to the nominal values after enabling Smart-Reflex
+ */
+void scale_vcores(struct vcores_data const *vcores)
+{
+ omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ);
+
+ do_scale_vcore(vcores->core.addr, vcores->core.value,
+ vcores->core.pmic);
+
+ do_scale_vcore(vcores->mpu.addr, vcores->mpu.value,
+ vcores->mpu.pmic);
+
+ do_scale_vcore(vcores->mm.addr, vcores->mm.value,
+ vcores->mm.pmic);
+
+ if (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3) {
+ /* Configure LDO SRAM "magic" bits */
+ writel(2, (*prcm)->prm_sldo_core_setup);
+ writel(2, (*prcm)->prm_sldo_mpu_setup);
+ writel(2, (*prcm)->prm_sldo_mm_setup);
+ }
}
-static inline void enable_clock_domain(u32 *const clkctrl_reg, u32 enable_mode)
+static inline void enable_clock_domain(u32 const clkctrl_reg, u32 enable_mode)
{
clrsetbits_le32(clkctrl_reg, CD_CLKCTRL_CLKTRCTRL_MASK,
enable_mode << CD_CLKCTRL_CLKTRCTRL_SHIFT);
- debug("Enable clock domain - %p\n", clkctrl_reg);
+ debug("Enable clock domain - %x\n", clkctrl_reg);
}
-static inline void wait_for_clk_enable(u32 *clkctrl_addr)
+static inline void wait_for_clk_enable(u32 clkctrl_addr)
{
u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_DISABLED;
u32 bound = LDELAY;
@@ -435,19 +563,19 @@ static inline void wait_for_clk_enable(u32 *clkctrl_addr)
idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >>
MODULE_CLKCTRL_IDLEST_SHIFT;
if (--bound == 0) {
- printf("Clock enable failed for 0x%p idlest 0x%x\n",
+ printf("Clock enable failed for 0x%x idlest 0x%x\n",
clkctrl_addr, clkctrl);
return;
}
}
}
-static inline void enable_clock_module(u32 *const clkctrl_addr, u32 enable_mode,
+static inline void enable_clock_module(u32 const clkctrl_addr, u32 enable_mode,
u32 wait_for_enable)
{
clrsetbits_le32(clkctrl_addr, MODULE_CLKCTRL_MODULEMODE_MASK,
enable_mode << MODULE_CLKCTRL_MODULEMODE_SHIFT);
- debug("Enable clock module - %p\n", clkctrl_addr);
+ debug("Enable clock module - %x\n", clkctrl_addr);
if (wait_for_enable)
wait_for_clk_enable(clkctrl_addr);
}
@@ -458,12 +586,12 @@ void freq_update_core(void)
const struct dpll_params *core_dpll_params;
u32 omap_rev = omap_revision();
- core_dpll_params = get_core_dpll_params();
+ core_dpll_params = get_core_dpll_params(*dplls_data);
/* Put EMIF clock domain in sw wakeup mode */
- enable_clock_domain(&prcm->cm_memif_clkstctrl,
+ enable_clock_domain((*prcm)->cm_memif_clkstctrl,
CD_CLKCTRL_CLKTRCTRL_SW_WKUP);
- wait_for_clk_enable(&prcm->cm_memif_emif_1_clkctrl);
- wait_for_clk_enable(&prcm->cm_memif_emif_2_clkctrl);
+ wait_for_clk_enable((*prcm)->cm_memif_emif_1_clkctrl);
+ wait_for_clk_enable((*prcm)->cm_memif_emif_2_clkctrl);
freq_config1 = SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK |
SHADOW_FREQ_CONFIG1_DLL_RESET_MASK;
@@ -475,9 +603,9 @@ void freq_update_core(void)
SHADOW_FREQ_CONFIG1_M2_DIV_SHIFT) &
SHADOW_FREQ_CONFIG1_M2_DIV_MASK;
- writel(freq_config1, &prcm->cm_shadow_freq_config1);
+ writel(freq_config1, (*prcm)->cm_shadow_freq_config1);
if (!wait_on_value(SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK, 0,
- &prcm->cm_shadow_freq_config1, LDELAY)) {
+ (u32 *) (*prcm)->cm_shadow_freq_config1, LDELAY)) {
puts("FREQ UPDATE procedure failed!!");
hang();
}
@@ -489,20 +617,20 @@ void freq_update_core(void)
*/
if (omap_rev != OMAP5430_ES1_0) {
/* Put EMIF clock domain back in hw auto mode */
- enable_clock_domain(&prcm->cm_memif_clkstctrl,
+ enable_clock_domain((*prcm)->cm_memif_clkstctrl,
CD_CLKCTRL_CLKTRCTRL_HW_AUTO);
- wait_for_clk_enable(&prcm->cm_memif_emif_1_clkctrl);
- wait_for_clk_enable(&prcm->cm_memif_emif_2_clkctrl);
+ wait_for_clk_enable((*prcm)->cm_memif_emif_1_clkctrl);
+ wait_for_clk_enable((*prcm)->cm_memif_emif_2_clkctrl);
}
}
-void bypass_dpll(u32 *const base)
+void bypass_dpll(u32 const base)
{
do_bypass_dpll(base);
wait_for_bypass(base);
}
-void lock_dpll(u32 *const base)
+void lock_dpll(u32 const base)
{
do_lock_dpll(base);
wait_for_lock(base);
@@ -511,39 +639,39 @@ void lock_dpll(u32 *const base)
void setup_clocks_for_console(void)
{
/* Do not add any spl_debug prints in this function */
- clrsetbits_le32(&prcm->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK,
+ clrsetbits_le32((*prcm)->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK,
CD_CLKCTRL_CLKTRCTRL_SW_WKUP <<
CD_CLKCTRL_CLKTRCTRL_SHIFT);
/* Enable all UARTs - console will be on one of them */
- clrsetbits_le32(&prcm->cm_l4per_uart1_clkctrl,
+ clrsetbits_le32((*prcm)->cm_l4per_uart1_clkctrl,
MODULE_CLKCTRL_MODULEMODE_MASK,
MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
MODULE_CLKCTRL_MODULEMODE_SHIFT);
- clrsetbits_le32(&prcm->cm_l4per_uart2_clkctrl,
+ clrsetbits_le32((*prcm)->cm_l4per_uart2_clkctrl,
MODULE_CLKCTRL_MODULEMODE_MASK,
MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
MODULE_CLKCTRL_MODULEMODE_SHIFT);
- clrsetbits_le32(&prcm->cm_l4per_uart3_clkctrl,
+ clrsetbits_le32((*prcm)->cm_l4per_uart3_clkctrl,
MODULE_CLKCTRL_MODULEMODE_MASK,
MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
MODULE_CLKCTRL_MODULEMODE_SHIFT);
- clrsetbits_le32(&prcm->cm_l4per_uart3_clkctrl,
+ clrsetbits_le32((*prcm)->cm_l4per_uart3_clkctrl,
MODULE_CLKCTRL_MODULEMODE_MASK,
MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
MODULE_CLKCTRL_MODULEMODE_SHIFT);
- clrsetbits_le32(&prcm->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK,
+ clrsetbits_le32((*prcm)->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK,
CD_CLKCTRL_CLKTRCTRL_HW_AUTO <<
CD_CLKCTRL_CLKTRCTRL_SHIFT);
}
-void do_enable_clocks(u32 *const *clk_domains,
- u32 *const *clk_modules_hw_auto,
- u32 *const *clk_modules_explicit_en,
+void do_enable_clocks(u32 const *clk_domains,
+ u32 const *clk_modules_hw_auto,
+ u32 const *clk_modules_explicit_en,
u8 wait_for_enable)
{
u32 i, max = 100;
@@ -582,7 +710,7 @@ void prcm_init(void)
case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR:
case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH:
enable_basic_clocks();
- scale_vcores();
+ scale_vcores(*omap_vcores);
setup_dplls();
#ifdef CONFIG_SYS_CLOCKS_ENABLE_ALL
setup_non_essential_dplls();
diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c
index 88253cf..9eb1279 100644
--- a/arch/arm/cpu/armv7/omap-common/emif-common.c
+++ b/arch/arm/cpu/armv7/omap-common/emif-common.c
@@ -66,6 +66,19 @@ inline u32 emif_num(u32 base)
return 0;
}
+/*
+ * Get SDRAM type connected to EMIF.
+ * Assuming similar SDRAM parts are connected to both EMIF's
+ * which is typically the case. So it is sufficient to get
+ * SDRAM type from EMIF1.
+ */
+u32 emif_sdram_type()
+{
+ struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE;
+
+ return (readl(&emif->emif_sdram_config) &
+ EMIF_REG_SDRAM_TYPE_MASK) >> EMIF_REG_SDRAM_TYPE_SHIFT;
+}
static inline u32 get_mr(u32 base, u32 cs, u32 mr_addr)
{
@@ -110,11 +123,13 @@ void emif_reset_phy(u32 base)
static void do_lpddr2_init(u32 base, u32 cs)
{
u32 mr_addr;
+ const struct lpddr2_mr_regs *mr_regs;
+ get_lpddr2_mr_regs(&mr_regs);
/* Wait till device auto initialization is complete */
while (get_mr(base, cs, LPDDR2_MR0) & LPDDR2_MR0_DAI_MASK)
;
- set_mr(base, cs, LPDDR2_MR10, MR10_ZQ_ZQINIT);
+ set_mr(base, cs, LPDDR2_MR10, mr_regs->mr10);
/*
* tZQINIT = 1 us
* Enough loops assuming a maximum of 2GHz
@@ -122,22 +137,18 @@ static void do_lpddr2_init(u32 base, u32 cs)
sdelay(2000);
- if (omap_revision() >= OMAP5430_ES1_0)
- set_mr(base, cs, LPDDR2_MR1, MR1_BL_8_BT_SEQ_WRAP_EN_NWR_8);
- else
- set_mr(base, cs, LPDDR2_MR1, MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3);
-
- set_mr(base, cs, LPDDR2_MR16, MR16_REF_FULL_ARRAY);
+ set_mr(base, cs, LPDDR2_MR1, mr_regs->mr1);
+ set_mr(base, cs, LPDDR2_MR16, mr_regs->mr16);
/*
* Enable refresh along with writing MR2
* Encoding of RL in MR2 is (RL - 2)
*/
mr_addr = LPDDR2_MR2 | EMIF_REG_REFRESH_EN_MASK;
- set_mr(base, cs, mr_addr, RL_FINAL - 2);
+ set_mr(base, cs, mr_addr, mr_regs->mr2);
- if (omap_revision() >= OMAP5430_ES1_0)
- set_mr(base, cs, LPDDR2_MR3, 0x1);
+ if (mr_regs->mr3 > 0)
+ set_mr(base, cs, LPDDR2_MR3, mr_regs->mr3);
}
static void lpddr2_init(u32 base, const struct emif_regs *regs)
@@ -255,9 +266,6 @@ static void ddr3_leveling(u32 base, const struct emif_regs *regs)
static void ddr3_init(u32 base, const struct emif_regs *regs)
{
struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
- u32 *ext_phy_ctrl_base = 0;
- u32 *emif_ext_phy_ctrl_base = 0;
- u32 i = 0;
/*
* Set SDRAM_CONFIG and PHY control registers to locked frequency
@@ -277,27 +285,7 @@ static void ddr3_init(u32 base, const struct emif_regs *regs)
writel(regs->ref_ctrl, &emif->emif_sdram_ref_ctrl);
writel(regs->read_idle_ctrl, &emif->emif_read_idlectrl);
- ext_phy_ctrl_base = (u32 *) &(regs->emif_ddr_ext_phy_ctrl_1);
- emif_ext_phy_ctrl_base = (u32 *) &(emif->emif_ddr_ext_phy_ctrl_1);
-
- /* Configure external phy control timing registers */
- for (i = 0; i < EMIF_EXT_PHY_CTRL_TIMING_REG; i++) {
- writel(*ext_phy_ctrl_base, emif_ext_phy_ctrl_base++);
- /* Update shadow registers */
- writel(*ext_phy_ctrl_base++, emif_ext_phy_ctrl_base++);
- }
-
- /*
- * external phy 6-24 registers do not change with
- * ddr frequency
- */
- for (i = 0; i < EMIF_EXT_PHY_CTRL_CONST_REG; i++) {
- writel(ddr3_ext_phy_ctrl_const_base[i],
- emif_ext_phy_ctrl_base++);
- /* Update shadow registers */
- writel(ddr3_ext_phy_ctrl_const_base[i],
- emif_ext_phy_ctrl_base++);
- }
+ do_ext_phy_settings(base, regs);
/* enable leveling */
writel(regs->emif_rd_wr_lvl_rmp_ctl, &emif->emif_rd_wr_lvl_rmp_ctl);
@@ -1079,7 +1067,7 @@ static void do_sdram_init(u32 base)
* OPP to another)
*/
if (!(in_sdram || warm_reset())) {
- if (omap_revision() != OMAP5432_ES1_0)
+ if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2)
lpddr2_init(base, regs);
else
ddr3_init(base, regs);
@@ -1096,9 +1084,6 @@ void emif_post_init_config(u32 base)
struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
u32 omap_rev = omap_revision();
- if (omap_rev == OMAP5430_ES1_0)
- return;
-
/* reset phy on ES2.0 */
if (omap_rev == OMAP4430_ES2_0)
emif_reset_phy(base);
@@ -1206,7 +1191,7 @@ void dmm_init(u32 base)
writel(lisa_map_regs->dmm_lisa_map_0,
&hw_lisa_map_regs->dmm_lisa_map_0);
- if (omap_revision() >= OMAP4460_ES1_0) {
+ if (lisa_map_regs->is_ma_present) {
hw_lisa_map_regs =
(struct dmm_lisa_map_regs *)MA_BASE;
@@ -1264,7 +1249,7 @@ void dmm_init(u32 base)
void sdram_init(void)
{
u32 in_sdram, size_prog, size_detect;
- u32 omap_rev = omap_revision();
+ u32 sdram_type = emif_sdram_type();
debug(">>sdram_init()\n");
@@ -1275,10 +1260,10 @@ void sdram_init(void)
debug("in_sdram = %d\n", in_sdram);
if (!(in_sdram || warm_reset())) {
- if (omap_rev != OMAP5432_ES1_0)
- bypass_dpll(&prcm->cm_clkmode_dpll_core);
+ if (sdram_type == EMIF_SDRAM_TYPE_LPDDR2)
+ bypass_dpll((*prcm)->cm_clkmode_dpll_core);
else
- writel(CM_DLL_CTRL_NO_OVERRIDE, &prcm->cm_dll_ctrl);
+ writel(CM_DLL_CTRL_NO_OVERRIDE, (*prcm)->cm_dll_ctrl);
}
if (!in_sdram)
@@ -1298,7 +1283,7 @@ void sdram_init(void)
}
/* for the shadow registers to take effect */
- if (omap_rev != OMAP5432_ES1_0)
+ if (sdram_type == EMIF_SDRAM_TYPE_LPDDR2)
freq_update_core();
/* Do some testing after the init */
diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
index 9ef10bd..05ff2e8 100644
--- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c
+++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
@@ -32,6 +32,8 @@
#include <asm/arch/sys_proto.h>
#include <asm/sizes.h>
#include <asm/emif.h>
+#include <asm/omap_common.h>
+#include <linux/compiler.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -79,12 +81,17 @@ u32 cortex_rev(void)
void omap_rev_string(void)
{
u32 omap_rev = omap_revision();
+ u32 soc_variant = (omap_rev & 0xF0000000) >> 28;
u32 omap_variant = (omap_rev & 0xFFFF0000) >> 16;
u32 major_rev = (omap_rev & 0x00000F00) >> 8;
u32 minor_rev = (omap_rev & 0x000000F0) >> 4;
- printf("OMAP%x ES%x.%x\n", omap_variant, major_rev,
- minor_rev);
+ if (soc_variant)
+ printf("OMAP");
+ else
+ printf("DRA");
+ printf("%x ES%x.%x\n", omap_variant, major_rev,
+ minor_rev);
}
#ifdef CONFIG_SPL_BUILD
@@ -99,6 +106,10 @@ void spl_display_print(void)
}
#endif
+void __weak srcomp_enable(void)
+{
+}
+
/*
* Routine: s_init
* Description: Does early system init of watchdog, muxing, andclocks
@@ -116,6 +127,8 @@ void spl_display_print(void)
void s_init(void)
{
init_omap_revision();
+ hw_data_init();
+
#ifdef CONFIG_SPL_BUILD
if (warm_reset() && (omap_revision() <= OMAP5430_ES1_0))
force_emif_self_refresh();
@@ -123,6 +136,7 @@ void s_init(void)
watchdog_init();
set_mux_conf_regs();
#ifdef CONFIG_SPL_BUILD
+ srcomp_enable();
setup_clocks_for_console();
gd = &gdata;
@@ -235,10 +249,7 @@ int checkboard(void)
*/
u32 get_device_type(void)
{
- struct omap_sys_ctrl_regs *ctrl =
- (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
-
- return (readl(&ctrl->control_status) &
+ return (readl((*ctrl)->control_status) &
(DEVICE_TYPE_MASK)) >> DEVICE_TYPE_SHIFT;
}
diff --git a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
index 40d64af..efae381 100644
--- a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
+++ b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
@@ -48,10 +48,6 @@ SECTIONS
. = ALIGN(4);
.data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
- .u_boot_list : {
- #include <u-boot.lst>
- }
-
. = ALIGN(4);
__image_copy_end = .;
_end = .;
diff --git a/arch/arm/cpu/armv7/omap-common/vc.c b/arch/arm/cpu/armv7/omap-common/vc.c
index a045b77..e6e5f78 100644
--- a/arch/arm/cpu/armv7/omap-common/vc.c
+++ b/arch/arm/cpu/armv7/omap-common/vc.c
@@ -81,13 +81,13 @@ void omap_vc_init(u16 speed_khz)
cycles_low -= 7;
val = (cycles_hi << PRM_VC_CFG_I2C_CLK_SCLH_SHIFT) |
(cycles_low << PRM_VC_CFG_I2C_CLK_SCLL_SHIFT);
- writel(val, &prcm->prm_vc_cfg_i2c_clk);
+ writel(val, (*prcm)->prm_vc_cfg_i2c_clk);
val = CONFIG_OMAP_VC_I2C_HS_MCODE <<
PRM_VC_CFG_I2C_MODE_HSMCODE_SHIFT;
/* No HS mode for now */
val &= ~PRM_VC_CFG_I2C_MODE_HSMODEEN_BIT;
- writel(val, &prcm->prm_vc_cfg_i2c_mode);
+ writel(val, (*prcm)->prm_vc_cfg_i2c_mode);
}
/**
@@ -113,14 +113,15 @@ int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data)
reg_val = sa << PRM_VC_VAL_BYPASS_SLAVEADDR_SHIFT |
reg_addr << PRM_VC_VAL_BYPASS_REGADDR_SHIFT |
reg_data << PRM_VC_VAL_BYPASS_DATA_SHIFT;
- writel(reg_val, &prcm->prm_vc_val_bypass);
+ writel(reg_val, (*prcm)->prm_vc_val_bypass);
/* Signal VC to send data */
- writel(reg_val | PRM_VC_VAL_BYPASS_VALID_BIT, &prcm->prm_vc_val_bypass);
+ writel(reg_val | PRM_VC_VAL_BYPASS_VALID_BIT,
+ (*prcm)->prm_vc_val_bypass);
/* Wait on VC to complete transmission */
do {
- reg_val = readl(&prcm->prm_vc_val_bypass) &
+ reg_val = readl((*prcm)->prm_vc_val_bypass) &
PRM_VC_VAL_BYPASS_VALID_BIT;
if (!reg_val)
break;
diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index 89c587e..c6d9a42 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -98,11 +98,11 @@ int board_mmc_init(bd_t *bis)
{
switch (spl_boot_device()) {
case BOOT_DEVICE_MMC1:
- omap_mmc_init(0, 0, 0);
+ omap_mmc_init(0, 0, 0, -1, -1);
break;
case BOOT_DEVICE_MMC2:
case BOOT_DEVICE_MMC2_2:
- omap_mmc_init(1, 0, 0);
+ omap_mmc_init(1, 0, 0, -1, -1);
break;
}
return 0;
@@ -110,7 +110,7 @@ int board_mmc_init(bd_t *bis)
void spl_board_init(void)
{
-#ifdef CONFIG_SPL_NAND_SUPPORT
+#if defined(CONFIG_SPL_NAND_SUPPORT) || defined(CONFIG_SPL_ONENAND_SUPPORT)
gpmc_init();
#endif
#ifdef CONFIG_SPL_I2C_SUPPORT
diff --git a/arch/arm/cpu/armv7/omap4/Makefile b/arch/arm/cpu/armv7/omap4/Makefile
index 83160a2..40808d1 100644
--- a/arch/arm/cpu/armv7/omap4/Makefile
+++ b/arch/arm/cpu/armv7/omap4/Makefile
@@ -27,8 +27,9 @@ LIB = $(obj)lib$(SOC).o
COBJS += sdram_elpida.o
COBJS += hwinit.o
-COBJS += clocks.o
COBJS += emif.o
+COBJS += prcm-regs.o
+COBJS += hw_data.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
diff --git a/arch/arm/cpu/armv7/omap4/clocks.c b/arch/arm/cpu/armv7/omap4/clocks.c
deleted file mode 100644
index 12c5803..0000000
--- a/arch/arm/cpu/armv7/omap4/clocks.c
+++ /dev/null
@@ -1,517 +0,0 @@
-/*
- *
- * Clock initialization for OMAP4
- *
- * (C) Copyright 2010
- * Texas Instruments, <www.ti.com>
- *
- * Aneesh V <aneesh@ti.com>
- *
- * Based on previous work by:
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- * Rajendra Nayak <rnayak@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-#include <asm/omap_common.h>
-#include <asm/gpio.h>
-#include <asm/arch/clocks.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/utils.h>
-#include <asm/omap_gpio.h>
-
-#ifndef CONFIG_SPL_BUILD
-/*
- * printing to console doesn't work unless
- * this code is executed from SPL
- */
-#define printf(fmt, args...)
-#define puts(s)
-#endif /* !CONFIG_SPL_BUILD */
-
-struct omap4_prcm_regs *const prcm = (struct omap4_prcm_regs *)0x4A004100;
-
-const u32 sys_clk_array[8] = {
- 12000000, /* 12 MHz */
- 13000000, /* 13 MHz */
- 16800000, /* 16.8 MHz */
- 19200000, /* 19.2 MHz */
- 26000000, /* 26 MHz */
- 27000000, /* 27 MHz */
- 38400000, /* 38.4 MHz */
-};
-
-/*
- * The M & N values in the following tables are created using the
- * following tool:
- * tools/omap/clocks_get_m_n.c
- * Please use this tool for creating the table for any new frequency.
- */
-
-/* dpll locked at 1400 MHz MPU clk at 700 MHz(OPP100) - DCC OFF */
-static const struct dpll_params mpu_dpll_params_1400mhz[NUM_SYS_CLKS] = {
- {175, 2, 1, -1, -1, -1, -1, -1}, /* 12 MHz */
- {700, 12, 1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {125, 2, 1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
- {401, 10, 1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
- {350, 12, 1, -1, -1, -1, -1, -1}, /* 26 MHz */
- {700, 26, 1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {638, 34, 1, -1, -1, -1, -1, -1} /* 38.4 MHz */
-};
-
-/* dpll locked at 1584 MHz - MPU clk at 792 MHz(OPP Turbo 4430) */
-static const struct dpll_params mpu_dpll_params_1600mhz[NUM_SYS_CLKS] = {
- {200, 2, 1, -1, -1, -1, -1, -1}, /* 12 MHz */
- {800, 12, 1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {619, 12, 1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
- {125, 2, 1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
- {400, 12, 1, -1, -1, -1, -1, -1}, /* 26 MHz */
- {800, 26, 1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {125, 5, 1, -1, -1, -1, -1, -1} /* 38.4 MHz */
-};
-
-/* dpll locked at 1200 MHz - MPU clk at 600 MHz */
-static const struct dpll_params mpu_dpll_params_1200mhz[NUM_SYS_CLKS] = {
- {50, 0, 1, -1, -1, -1, -1, -1}, /* 12 MHz */
- {600, 12, 1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {250, 6, 1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
- {125, 3, 1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
- {300, 12, 1, -1, -1, -1, -1, -1}, /* 26 MHz */
- {200, 8, 1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {125, 7, 1, -1, -1, -1, -1, -1} /* 38.4 MHz */
-};
-
-static const struct dpll_params core_dpll_params_1600mhz[NUM_SYS_CLKS] = {
- {200, 2, 1, 5, 8, 4, 6, 5}, /* 12 MHz */
- {800, 12, 1, 5, 8, 4, 6, 5}, /* 13 MHz */
- {619, 12, 1, 5, 8, 4, 6, 5}, /* 16.8 MHz */
- {125, 2, 1, 5, 8, 4, 6, 5}, /* 19.2 MHz */
- {400, 12, 1, 5, 8, 4, 6, 5}, /* 26 MHz */
- {800, 26, 1, 5, 8, 4, 6, 5}, /* 27 MHz */
- {125, 5, 1, 5, 8, 4, 6, 5} /* 38.4 MHz */
-};
-
-static const struct dpll_params core_dpll_params_es1_1524mhz[NUM_SYS_CLKS] = {
- {127, 1, 1, 5, 8, 4, 6, 5}, /* 12 MHz */
- {762, 12, 1, 5, 8, 4, 6, 5}, /* 13 MHz */
- {635, 13, 1, 5, 8, 4, 6, 5}, /* 16.8 MHz */
- {635, 15, 1, 5, 8, 4, 6, 5}, /* 19.2 MHz */
- {381, 12, 1, 5, 8, 4, 6, 5}, /* 26 MHz */
- {254, 8, 1, 5, 8, 4, 6, 5}, /* 27 MHz */
- {496, 24, 1, 5, 8, 4, 6, 5} /* 38.4 MHz */
-};
-
-static const struct dpll_params
- core_dpll_params_es2_1600mhz_ddr200mhz[NUM_SYS_CLKS] = {
- {200, 2, 2, 5, 8, 4, 6, 5}, /* 12 MHz */
- {800, 12, 2, 5, 8, 4, 6, 5}, /* 13 MHz */
- {619, 12, 2, 5, 8, 4, 6, 5}, /* 16.8 MHz */
- {125, 2, 2, 5, 8, 4, 6, 5}, /* 19.2 MHz */
- {400, 12, 2, 5, 8, 4, 6, 5}, /* 26 MHz */
- {800, 26, 2, 5, 8, 4, 6, 5}, /* 27 MHz */
- {125, 5, 2, 5, 8, 4, 6, 5} /* 38.4 MHz */
-};
-
-static const struct dpll_params per_dpll_params_1536mhz[NUM_SYS_CLKS] = {
- {64, 0, 8, 6, 12, 9, 4, 5}, /* 12 MHz */
- {768, 12, 8, 6, 12, 9, 4, 5}, /* 13 MHz */
- {320, 6, 8, 6, 12, 9, 4, 5}, /* 16.8 MHz */
- {40, 0, 8, 6, 12, 9, 4, 5}, /* 19.2 MHz */
- {384, 12, 8, 6, 12, 9, 4, 5}, /* 26 MHz */
- {256, 8, 8, 6, 12, 9, 4, 5}, /* 27 MHz */
- {20, 0, 8, 6, 12, 9, 4, 5} /* 38.4 MHz */
-};
-
-static const struct dpll_params iva_dpll_params_1862mhz[NUM_SYS_CLKS] = {
- {931, 11, -1, -1, 4, 7, -1, -1}, /* 12 MHz */
- {931, 12, -1, -1, 4, 7, -1, -1}, /* 13 MHz */
- {665, 11, -1, -1, 4, 7, -1, -1}, /* 16.8 MHz */
- {727, 14, -1, -1, 4, 7, -1, -1}, /* 19.2 MHz */
- {931, 25, -1, -1, 4, 7, -1, -1}, /* 26 MHz */
- {931, 26, -1, -1, 4, 7, -1, -1}, /* 27 MHz */
- {291, 11, -1, -1, 4, 7, -1, -1} /* 38.4 MHz */
-};
-
-/* ABE M & N values with sys_clk as source */
-static const struct dpll_params
- abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = {
- {49, 5, 1, 1, -1, -1, -1, -1}, /* 12 MHz */
- {68, 8, 1, 1, -1, -1, -1, -1}, /* 13 MHz */
- {35, 5, 1, 1, -1, -1, -1, -1}, /* 16.8 MHz */
- {46, 8, 1, 1, -1, -1, -1, -1}, /* 19.2 MHz */
- {34, 8, 1, 1, -1, -1, -1, -1}, /* 26 MHz */
- {29, 7, 1, 1, -1, -1, -1, -1}, /* 27 MHz */
- {64, 24, 1, 1, -1, -1, -1, -1} /* 38.4 MHz */
-};
-
-/* ABE M & N values with 32K clock as source */
-static const struct dpll_params abe_dpll_params_32k_196608khz = {
- 750, 0, 1, 1, -1, -1, -1, -1
-};
-
-static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = {
- {80, 0, 2, -1, -1, -1, -1, -1}, /* 12 MHz */
- {960, 12, 2, -1, -1, -1, -1, -1}, /* 13 MHz */
- {400, 6, 2, -1, -1, -1, -1, -1}, /* 16.8 MHz */
- {50, 0, 2, -1, -1, -1, -1, -1}, /* 19.2 MHz */
- {480, 12, 2, -1, -1, -1, -1, -1}, /* 26 MHz */
- {320, 8, 2, -1, -1, -1, -1, -1}, /* 27 MHz */
- {25, 0, 2, -1, -1, -1, -1, -1} /* 38.4 MHz */
-};
-
-void setup_post_dividers(u32 *const base, const struct dpll_params *params)
-{
- struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
-
- /* Setup post-dividers */
- if (params->m2 >= 0)
- writel(params->m2, &dpll_regs->cm_div_m2_dpll);
- if (params->m3 >= 0)
- writel(params->m3, &dpll_regs->cm_div_m3_dpll);
- if (params->m4 >= 0)
- writel(params->m4, &dpll_regs->cm_div_m4_dpll);
- if (params->m5 >= 0)
- writel(params->m5, &dpll_regs->cm_div_m5_dpll);
- if (params->m6 >= 0)
- writel(params->m6, &dpll_regs->cm_div_m6_dpll);
- if (params->m7 >= 0)
- writel(params->m7, &dpll_regs->cm_div_m7_dpll);
-}
-
-/*
- * Lock MPU dpll
- *
- * Resulting MPU frequencies:
- * 4430 ES1.0 : 600 MHz
- * 4430 ES2.x : 792 MHz (OPP Turbo)
- * 4460 : 920 MHz (OPP Turbo) - DCC disabled
- */
-const struct dpll_params *get_mpu_dpll_params(void)
-{
- u32 omap_rev, sysclk_ind;
-
- omap_rev = omap_revision();
- sysclk_ind = get_sys_clk_index();
-
- if (omap_rev == OMAP4430_ES1_0)
- return &mpu_dpll_params_1200mhz[sysclk_ind];
- else if (omap_rev < OMAP4460_ES1_0)
- return &mpu_dpll_params_1600mhz[sysclk_ind];
- else
- return &mpu_dpll_params_1400mhz[sysclk_ind];
-}
-
-const struct dpll_params *get_core_dpll_params(void)
-{
- u32 sysclk_ind = get_sys_clk_index();
-
- switch (omap_revision()) {
- case OMAP4430_ES1_0:
- return &core_dpll_params_es1_1524mhz[sysclk_ind];
- case OMAP4430_ES2_0:
- case OMAP4430_SILICON_ID_INVALID:
- /* safest */
- return &core_dpll_params_es2_1600mhz_ddr200mhz[sysclk_ind];
- default:
- return &core_dpll_params_1600mhz[sysclk_ind];
- }
-}
-
-
-const struct dpll_params *get_per_dpll_params(void)
-{
- u32 sysclk_ind = get_sys_clk_index();
- return &per_dpll_params_1536mhz[sysclk_ind];
-}
-
-const struct dpll_params *get_iva_dpll_params(void)
-{
- u32 sysclk_ind = get_sys_clk_index();
- return &iva_dpll_params_1862mhz[sysclk_ind];
-}
-
-const struct dpll_params *get_usb_dpll_params(void)
-{
- u32 sysclk_ind = get_sys_clk_index();
- return &usb_dpll_params_1920mhz[sysclk_ind];
-}
-
-const struct dpll_params *get_abe_dpll_params(void)
-{
-#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
- u32 sysclk_ind = get_sys_clk_index();
- return &abe_dpll_params_sysclk_196608khz[sysclk_ind];
-#else
- return &abe_dpll_params_32k_196608khz;
-#endif
-}
-
-/*
- * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva
- * We set the maximum voltages allowed here because Smart-Reflex is not
- * enabled in bootloader. Voltage initialization in the kernel will set
- * these to the nominal values after enabling Smart-Reflex
- */
-void scale_vcores(void)
-{
- u32 volt, omap_rev;
-
- omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ);
-
- omap_rev = omap_revision();
-
- /*
- * Scale Voltage rails:
- * 1. VDD_CORE
- * 3. VDD_MPU
- * 3. VDD_IVA
- */
- if (omap_rev < OMAP4460_ES1_0) {
- /*
- * OMAP4430:
- * VDD_CORE = TWL6030 VCORE3
- * VDD_MPU = TWL6030 VCORE1
- * VDD_IVA = TWL6030 VCORE2
- */
- volt = 1200;
- do_scale_vcore(SMPS_REG_ADDR_VCORE3, volt);
-
- /*
- * note on VDD_MPU:
- * Setting a high voltage for Nitro mode as smart reflex is not
- * enabled. We use the maximum possible value in the AVS range
- * because the next higher voltage in the discrete range
- * (code >= 0b111010) is way too high.
- */
- volt = 1325;
- do_scale_vcore(SMPS_REG_ADDR_VCORE1, volt);
- volt = 1200;
- do_scale_vcore(SMPS_REG_ADDR_VCORE2, volt);
-
- } else {
- /*
- * OMAP4460:
- * VDD_CORE = TWL6030 VCORE1
- * VDD_MPU = TPS62361
- * VDD_IVA = TWL6030 VCORE2
- */
- volt = 1200;
- do_scale_vcore(SMPS_REG_ADDR_VCORE1, volt);
- /* TPS62361 */
- volt = 1203;
- do_scale_tps62361(TPS62361_VSEL0_GPIO,
- TPS62361_REG_ADDR_SET1, volt);
- /* VCORE 2 - supplies vdd_iva */
- volt = 1200;
- do_scale_vcore(SMPS_REG_ADDR_VCORE2, volt);
- }
-}
-
-u32 get_offset_code(u32 offset)
-{
- u32 offset_code, step = 12660; /* 12.66 mV represented in uV */
-
- if (omap_revision() == OMAP4430_ES1_0)
- offset -= PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV;
- else
- offset -= PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV;
-
- offset_code = (offset + step - 1) / step;
-
- /* The code starts at 1 not 0 */
- return ++offset_code;
-}
-
-/*
- * Enable essential clock domains, modules and
- * do some additional special settings needed
- */
-void enable_basic_clocks(void)
-{
- u32 *const clk_domains_essential[] = {
- &prcm->cm_l4per_clkstctrl,
- &prcm->cm_l3init_clkstctrl,
- &prcm->cm_memif_clkstctrl,
- &prcm->cm_l4cfg_clkstctrl,
- 0
- };
-
- u32 *const clk_modules_hw_auto_essential[] = {
- &prcm->cm_l3_2_gpmc_clkctrl,
- &prcm->cm_memif_emif_1_clkctrl,
- &prcm->cm_memif_emif_2_clkctrl,
- &prcm->cm_l4cfg_l4_cfg_clkctrl,
- &prcm->cm_wkup_gpio1_clkctrl,
- &prcm->cm_l4per_gpio2_clkctrl,
- &prcm->cm_l4per_gpio3_clkctrl,
- &prcm->cm_l4per_gpio4_clkctrl,
- &prcm->cm_l4per_gpio5_clkctrl,
- &prcm->cm_l4per_gpio6_clkctrl,
- 0
- };
-
- u32 *const clk_modules_explicit_en_essential[] = {
- &prcm->cm_wkup_gptimer1_clkctrl,
- &prcm->cm_l3init_hsmmc1_clkctrl,
- &prcm->cm_l3init_hsmmc2_clkctrl,
- &prcm->cm_l4per_gptimer2_clkctrl,
- &prcm->cm_wkup_wdtimer2_clkctrl,
- &prcm->cm_l4per_uart3_clkctrl,
- 0
- };
-
- /* Enable optional additional functional clock for GPIO4 */
- setbits_le32(&prcm->cm_l4per_gpio4_clkctrl,
- GPIO4_CLKCTRL_OPTFCLKEN_MASK);
-
- /* Enable 96 MHz clock for MMC1 & MMC2 */
- setbits_le32(&prcm->cm_l3init_hsmmc1_clkctrl,
- HSMMC_CLKCTRL_CLKSEL_MASK);
- setbits_le32(&prcm->cm_l3init_hsmmc2_clkctrl,
- HSMMC_CLKCTRL_CLKSEL_MASK);
-
- /* Select 32KHz clock as the source of GPTIMER1 */
- setbits_le32(&prcm->cm_wkup_gptimer1_clkctrl,
- GPTIMER1_CLKCTRL_CLKSEL_MASK);
-
- /* Enable optional 48M functional clock for USB PHY */
- setbits_le32(&prcm->cm_l3init_usbphy_clkctrl,
- USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK);
-
- do_enable_clocks(clk_domains_essential,
- clk_modules_hw_auto_essential,
- clk_modules_explicit_en_essential,
- 1);
-}
-
-void enable_basic_uboot_clocks(void)
-{
- u32 *const clk_domains_essential[] = {
- 0
- };
-
- u32 *const clk_modules_hw_auto_essential[] = {
- &prcm->cm_l3init_hsusbotg_clkctrl,
- &prcm->cm_l3init_usbphy_clkctrl,
- &prcm->cm_l3init_usbphy_clkctrl,
- &prcm->cm_clksel_usb_60mhz,
- &prcm->cm_l3init_hsusbtll_clkctrl,
- 0
- };
-
- u32 *const clk_modules_explicit_en_essential[] = {
- &prcm->cm_l4per_mcspi1_clkctrl,
- &prcm->cm_l4per_i2c1_clkctrl,
- &prcm->cm_l4per_i2c2_clkctrl,
- &prcm->cm_l4per_i2c3_clkctrl,
- &prcm->cm_l4per_i2c4_clkctrl,
- &prcm->cm_l3init_hsusbhost_clkctrl,
- 0
- };
-
- do_enable_clocks(clk_domains_essential,
- clk_modules_hw_auto_essential,
- clk_modules_explicit_en_essential,
- 1);
-}
-
-/*
- * Enable non-essential clock domains, modules and
- * do some additional special settings needed
- */
-void enable_non_essential_clocks(void)
-{
- u32 *const clk_domains_non_essential[] = {
- &prcm->cm_mpu_m3_clkstctrl,
- &prcm->cm_ivahd_clkstctrl,
- &prcm->cm_dsp_clkstctrl,
- &prcm->cm_dss_clkstctrl,
- &prcm->cm_sgx_clkstctrl,
- &prcm->cm1_abe_clkstctrl,
- &prcm->cm_c2c_clkstctrl,
- &prcm->cm_cam_clkstctrl,
- &prcm->cm_dss_clkstctrl,
- &prcm->cm_sdma_clkstctrl,
- 0
- };
-
- u32 *const clk_modules_hw_auto_non_essential[] = {
- &prcm->cm_l3instr_l3_3_clkctrl,
- &prcm->cm_l3instr_l3_instr_clkctrl,
- &prcm->cm_l3instr_intrconn_wp1_clkctrl,
- &prcm->cm_l3init_hsi_clkctrl,
- 0
- };
-
- u32 *const clk_modules_explicit_en_non_essential[] = {
- &prcm->cm1_abe_aess_clkctrl,
- &prcm->cm1_abe_pdm_clkctrl,
- &prcm->cm1_abe_dmic_clkctrl,
- &prcm->cm1_abe_mcasp_clkctrl,
- &prcm->cm1_abe_mcbsp1_clkctrl,
- &prcm->cm1_abe_mcbsp2_clkctrl,
- &prcm->cm1_abe_mcbsp3_clkctrl,
- &prcm->cm1_abe_slimbus_clkctrl,
- &prcm->cm1_abe_timer5_clkctrl,
- &prcm->cm1_abe_timer6_clkctrl,
- &prcm->cm1_abe_timer7_clkctrl,
- &prcm->cm1_abe_timer8_clkctrl,
- &prcm->cm1_abe_wdt3_clkctrl,
- &prcm->cm_l4per_gptimer9_clkctrl,
- &prcm->cm_l4per_gptimer10_clkctrl,
- &prcm->cm_l4per_gptimer11_clkctrl,
- &prcm->cm_l4per_gptimer3_clkctrl,
- &prcm->cm_l4per_gptimer4_clkctrl,
- &prcm->cm_l4per_hdq1w_clkctrl,
- &prcm->cm_l4per_mcbsp4_clkctrl,
- &prcm->cm_l4per_mcspi2_clkctrl,
- &prcm->cm_l4per_mcspi3_clkctrl,
- &prcm->cm_l4per_mcspi4_clkctrl,
- &prcm->cm_l4per_mmcsd3_clkctrl,
- &prcm->cm_l4per_mmcsd4_clkctrl,
- &prcm->cm_l4per_mmcsd5_clkctrl,
- &prcm->cm_l4per_uart1_clkctrl,
- &prcm->cm_l4per_uart2_clkctrl,
- &prcm->cm_l4per_uart4_clkctrl,
- &prcm->cm_wkup_keyboard_clkctrl,
- &prcm->cm_wkup_wdtimer2_clkctrl,
- &prcm->cm_cam_iss_clkctrl,
- &prcm->cm_cam_fdif_clkctrl,
- &prcm->cm_dss_dss_clkctrl,
- &prcm->cm_sgx_sgx_clkctrl,
- 0
- };
-
- /* Enable optional functional clock for ISS */
- setbits_le32(&prcm->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK);
-
- /* Enable all optional functional clocks of DSS */
- setbits_le32(&prcm->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK);
-
- do_enable_clocks(clk_domains_non_essential,
- clk_modules_hw_auto_non_essential,
- clk_modules_explicit_en_non_essential,
- 0);
-
- /* Put camera module in no sleep mode */
- clrsetbits_le32(&prcm->cm_cam_clkstctrl, MODULE_CLKCTRL_MODULEMODE_MASK,
- CD_CLKCTRL_CLKTRCTRL_NO_SLEEP <<
- MODULE_CLKCTRL_MODULEMODE_SHIFT);
-}
diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c
new file mode 100644
index 0000000..7551b98
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap4/hw_data.c
@@ -0,0 +1,491 @@
+/*
+ *
+ * HW data initialization for OMAP4
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * Sricharan R <r.sricharan@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/omap_common.h>
+#include <asm/arch/clocks.h>
+#include <asm/omap_gpio.h>
+#include <asm/io.h>
+
+struct prcm_regs const **prcm =
+ (struct prcm_regs const **) OMAP_SRAM_SCRATCH_PRCM_PTR;
+struct dplls const **dplls_data =
+ (struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR;
+struct vcores_data const **omap_vcores =
+ (struct vcores_data const **) OMAP_SRAM_SCRATCH_VCORES_PTR;
+struct omap_sys_ctrl_regs const **ctrl =
+ (struct omap_sys_ctrl_regs const **)OMAP4_SRAM_SCRATCH_SYS_CTRL;
+
+/*
+ * The M & N values in the following tables are created using the
+ * following tool:
+ * tools/omap/clocks_get_m_n.c
+ * Please use this tool for creating the table for any new frequency.
+ */
+
+/*
+ * dpll locked at 1400 MHz MPU clk at 700 MHz(OPP100) - DCC OFF
+ * OMAP4460 OPP_NOM frequency
+ */
+static const struct dpll_params mpu_dpll_params_1400mhz[NUM_SYS_CLKS] = {
+ {175, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {700, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {125, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {401, 10, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {350, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {700, 26, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {638, 34, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
+};
+
+/*
+ * dpll locked at 1600 MHz - MPU clk at 800 MHz(OPP Turbo 4430)
+ * OMAP4430 OPP_TURBO frequency
+ */
+static const struct dpll_params mpu_dpll_params_1600mhz[NUM_SYS_CLKS] = {
+ {200, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {800, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {619, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {125, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {400, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {800, 26, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {125, 5, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
+};
+
+/*
+ * dpll locked at 1200 MHz - MPU clk at 600 MHz
+ * OMAP4430 OPP_NOM frequency
+ */
+static const struct dpll_params mpu_dpll_params_1200mhz[NUM_SYS_CLKS] = {
+ {50, 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {600, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {250, 6, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {125, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {300, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {200, 8, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {125, 7, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
+};
+
+/* OMAP4460 OPP_NOM frequency */
+static const struct dpll_params core_dpll_params_1600mhz[NUM_SYS_CLKS] = {
+ {200, 2, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 12 MHz */
+ {800, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 13 MHz */
+ {619, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 16.8 MHz */
+ {125, 2, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 19.2 MHz */
+ {400, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 26 MHz */
+ {800, 26, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 27 MHz */
+ {125, 5, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1} /* 38.4 MHz */
+};
+
+/* OMAP4430 ES1 OPP_NOM frequency */
+static const struct dpll_params core_dpll_params_es1_1524mhz[NUM_SYS_CLKS] = {
+ {127, 1, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 12 MHz */
+ {762, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 13 MHz */
+ {635, 13, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 16.8 MHz */
+ {635, 15, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 19.2 MHz */
+ {381, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 26 MHz */
+ {254, 8, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 27 MHz */
+ {496, 24, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1} /* 38.4 MHz */
+};
+
+/* OMAP4430 ES2.X OPP_NOM frequency */
+static const struct dpll_params
+ core_dpll_params_es2_1600mhz_ddr200mhz[NUM_SYS_CLKS] = {
+ {200, 2, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 12 MHz */
+ {800, 12, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 13 MHz */
+ {619, 12, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 16.8 MHz */
+ {125, 2, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 19.2 MHz */
+ {400, 12, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 26 MHz */
+ {800, 26, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 27 MHz */
+ {125, 5, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1} /* 38.4 MHz */
+};
+
+static const struct dpll_params per_dpll_params_1536mhz[NUM_SYS_CLKS] = {
+ {64, 0, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 12 MHz */
+ {768, 12, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 13 MHz */
+ {320, 6, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 16.8 MHz */
+ {40, 0, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 19.2 MHz */
+ {384, 12, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 26 MHz */
+ {256, 8, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 27 MHz */
+ {20, 0, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1} /* 38.4 MHz */
+};
+
+static const struct dpll_params iva_dpll_params_1862mhz[NUM_SYS_CLKS] = {
+ {931, 11, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {931, 12, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {665, 11, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {727, 14, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {931, 25, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {931, 26, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {291, 11, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
+};
+
+/* ABE M & N values with sys_clk as source */
+static const struct dpll_params
+ abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = {
+ {49, 5, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {68, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {35, 5, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {46, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {34, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {29, 7, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {64, 24, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
+};
+
+/* ABE M & N values with 32K clock as source */
+static const struct dpll_params abe_dpll_params_32k_196608khz = {
+ 750, 0, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1
+};
+
+static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = {
+ {80, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {960, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {400, 6, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {50, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {480, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {320, 8, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {25, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
+};
+
+struct dplls omap4430_dplls_es1 = {
+ .mpu = mpu_dpll_params_1200mhz,
+ .core = core_dpll_params_es1_1524mhz,
+ .per = per_dpll_params_1536mhz,
+ .iva = iva_dpll_params_1862mhz,
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+ .abe = abe_dpll_params_sysclk_196608khz,
+#else
+ .abe = &abe_dpll_params_32k_196608khz,
+#endif
+ .usb = usb_dpll_params_1920mhz,
+ .ddr = NULL
+};
+
+struct dplls omap4430_dplls = {
+ .mpu = mpu_dpll_params_1200mhz,
+ .core = core_dpll_params_1600mhz,
+ .per = per_dpll_params_1536mhz,
+ .iva = iva_dpll_params_1862mhz,
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+ .abe = abe_dpll_params_sysclk_196608khz,
+#else
+ .abe = &abe_dpll_params_32k_196608khz,
+#endif
+ .usb = usb_dpll_params_1920mhz,
+ .ddr = NULL
+};
+
+struct dplls omap4460_dplls = {
+ .mpu = mpu_dpll_params_1400mhz,
+ .core = core_dpll_params_1600mhz,
+ .per = per_dpll_params_1536mhz,
+ .iva = iva_dpll_params_1862mhz,
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+ .abe = abe_dpll_params_sysclk_196608khz,
+#else
+ .abe = &abe_dpll_params_32k_196608khz,
+#endif
+ .usb = usb_dpll_params_1920mhz,
+ .ddr = NULL
+};
+
+struct pmic_data twl6030_4430es1 = {
+ .base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV,
+ .step = 12660, /* 10 mV represented in uV */
+ /* The code starts at 1 not 0 */
+ .start_code = 1,
+};
+
+struct pmic_data twl6030 = {
+ .base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV,
+ .step = 12660, /* 10 mV represented in uV */
+ /* The code starts at 1 not 0 */
+ .start_code = 1,
+};
+
+struct pmic_data tps62361 = {
+ .base_offset = TPS62361_BASE_VOLT_MV,
+ .step = 10000, /* 10 mV represented in uV */
+ .start_code = 0,
+ .gpio = TPS62361_VSEL0_GPIO,
+ .gpio_en = 1
+};
+
+struct vcores_data omap4430_volts_es1 = {
+ .mpu.value = 1325,
+ .mpu.addr = SMPS_REG_ADDR_VCORE1,
+ .mpu.pmic = &twl6030_4430es1,
+
+ .core.value = 1200,
+ .core.addr = SMPS_REG_ADDR_VCORE3,
+ .core.pmic = &twl6030_4430es1,
+
+ .mm.value = 1200,
+ .mm.addr = SMPS_REG_ADDR_VCORE2,
+ .mm.pmic = &twl6030_4430es1,
+};
+
+struct vcores_data omap4430_volts = {
+ .mpu.value = 1325,
+ .mpu.addr = SMPS_REG_ADDR_VCORE1,
+ .mpu.pmic = &twl6030,
+
+ .core.value = 1200,
+ .core.addr = SMPS_REG_ADDR_VCORE3,
+ .core.pmic = &twl6030,
+
+ .mm.value = 1200,
+ .mm.addr = SMPS_REG_ADDR_VCORE2,
+ .mm.pmic = &twl6030,
+};
+
+struct vcores_data omap4460_volts = {
+ .mpu.value = 1203,
+ .mpu.addr = TPS62361_REG_ADDR_SET1,
+ .mpu.pmic = &tps62361,
+
+ .core.value = 1200,
+ .core.addr = SMPS_REG_ADDR_VCORE1,
+ .core.pmic = &tps62361,
+
+ .mm.value = 1200,
+ .mm.addr = SMPS_REG_ADDR_VCORE2,
+ .mm.pmic = &tps62361,
+};
+
+/*
+ * Enable essential clock domains, modules and
+ * do some additional special settings needed
+ */
+void enable_basic_clocks(void)
+{
+ u32 const clk_domains_essential[] = {
+ (*prcm)->cm_l4per_clkstctrl,
+ (*prcm)->cm_l3init_clkstctrl,
+ (*prcm)->cm_memif_clkstctrl,
+ (*prcm)->cm_l4cfg_clkstctrl,
+ 0
+ };
+
+ u32 const clk_modules_hw_auto_essential[] = {
+ (*prcm)->cm_l3_gpmc_clkctrl,
+ (*prcm)->cm_memif_emif_1_clkctrl,
+ (*prcm)->cm_memif_emif_2_clkctrl,
+ (*prcm)->cm_l4cfg_l4_cfg_clkctrl,
+ (*prcm)->cm_wkup_gpio1_clkctrl,
+ (*prcm)->cm_l4per_gpio2_clkctrl,
+ (*prcm)->cm_l4per_gpio3_clkctrl,
+ (*prcm)->cm_l4per_gpio4_clkctrl,
+ (*prcm)->cm_l4per_gpio5_clkctrl,
+ (*prcm)->cm_l4per_gpio6_clkctrl,
+ 0
+ };
+
+ u32 const clk_modules_explicit_en_essential[] = {
+ (*prcm)->cm_wkup_gptimer1_clkctrl,
+ (*prcm)->cm_l3init_hsmmc1_clkctrl,
+ (*prcm)->cm_l3init_hsmmc2_clkctrl,
+ (*prcm)->cm_l4per_gptimer2_clkctrl,
+ (*prcm)->cm_wkup_wdtimer2_clkctrl,
+ (*prcm)->cm_l4per_uart3_clkctrl,
+ 0
+ };
+
+ /* Enable optional additional functional clock for GPIO4 */
+ setbits_le32((*prcm)->cm_l4per_gpio4_clkctrl,
+ GPIO4_CLKCTRL_OPTFCLKEN_MASK);
+
+ /* Enable 96 MHz clock for MMC1 & MMC2 */
+ setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl,
+ HSMMC_CLKCTRL_CLKSEL_MASK);
+ setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl,
+ HSMMC_CLKCTRL_CLKSEL_MASK);
+
+ /* Select 32KHz clock as the source of GPTIMER1 */
+ setbits_le32((*prcm)->cm_wkup_gptimer1_clkctrl,
+ GPTIMER1_CLKCTRL_CLKSEL_MASK);
+
+ /* Enable optional 48M functional clock for USB PHY */
+ setbits_le32((*prcm)->cm_l3init_usbphy_clkctrl,
+ USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK);
+
+ do_enable_clocks(clk_domains_essential,
+ clk_modules_hw_auto_essential,
+ clk_modules_explicit_en_essential,
+ 1);
+}
+
+void enable_basic_uboot_clocks(void)
+{
+ u32 const clk_domains_essential[] = {
+ 0
+ };
+
+ u32 const clk_modules_hw_auto_essential[] = {
+ (*prcm)->cm_l3init_hsusbotg_clkctrl,
+ (*prcm)->cm_l3init_usbphy_clkctrl,
+ (*prcm)->cm_l3init_usbphy_clkctrl,
+ (*prcm)->cm_clksel_usb_60mhz,
+ (*prcm)->cm_l3init_hsusbtll_clkctrl,
+ 0
+ };
+
+ u32 const clk_modules_explicit_en_essential[] = {
+ (*prcm)->cm_l4per_mcspi1_clkctrl,
+ (*prcm)->cm_l4per_i2c1_clkctrl,
+ (*prcm)->cm_l4per_i2c2_clkctrl,
+ (*prcm)->cm_l4per_i2c3_clkctrl,
+ (*prcm)->cm_l4per_i2c4_clkctrl,
+ (*prcm)->cm_l3init_hsusbhost_clkctrl,
+ 0
+ };
+
+ do_enable_clocks(clk_domains_essential,
+ clk_modules_hw_auto_essential,
+ clk_modules_explicit_en_essential,
+ 1);
+}
+
+/*
+ * Enable non-essential clock domains, modules and
+ * do some additional special settings needed
+ */
+void enable_non_essential_clocks(void)
+{
+ u32 const clk_domains_non_essential[] = {
+ (*prcm)->cm_mpu_m3_clkstctrl,
+ (*prcm)->cm_ivahd_clkstctrl,
+ (*prcm)->cm_dsp_clkstctrl,
+ (*prcm)->cm_dss_clkstctrl,
+ (*prcm)->cm_sgx_clkstctrl,
+ (*prcm)->cm1_abe_clkstctrl,
+ (*prcm)->cm_c2c_clkstctrl,
+ (*prcm)->cm_cam_clkstctrl,
+ (*prcm)->cm_dss_clkstctrl,
+ (*prcm)->cm_sdma_clkstctrl,
+ 0
+ };
+
+ u32 const clk_modules_hw_auto_non_essential[] = {
+ (*prcm)->cm_l3instr_l3_3_clkctrl,
+ (*prcm)->cm_l3instr_l3_instr_clkctrl,
+ (*prcm)->cm_l3instr_intrconn_wp1_clkctrl,
+ (*prcm)->cm_l3init_hsi_clkctrl,
+ 0
+ };
+
+ u32 const clk_modules_explicit_en_non_essential[] = {
+ (*prcm)->cm1_abe_aess_clkctrl,
+ (*prcm)->cm1_abe_pdm_clkctrl,
+ (*prcm)->cm1_abe_dmic_clkctrl,
+ (*prcm)->cm1_abe_mcasp_clkctrl,
+ (*prcm)->cm1_abe_mcbsp1_clkctrl,
+ (*prcm)->cm1_abe_mcbsp2_clkctrl,
+ (*prcm)->cm1_abe_mcbsp3_clkctrl,
+ (*prcm)->cm1_abe_slimbus_clkctrl,
+ (*prcm)->cm1_abe_timer5_clkctrl,
+ (*prcm)->cm1_abe_timer6_clkctrl,
+ (*prcm)->cm1_abe_timer7_clkctrl,
+ (*prcm)->cm1_abe_timer8_clkctrl,
+ (*prcm)->cm1_abe_wdt3_clkctrl,
+ (*prcm)->cm_l4per_gptimer9_clkctrl,
+ (*prcm)->cm_l4per_gptimer10_clkctrl,
+ (*prcm)->cm_l4per_gptimer11_clkctrl,
+ (*prcm)->cm_l4per_gptimer3_clkctrl,
+ (*prcm)->cm_l4per_gptimer4_clkctrl,
+ (*prcm)->cm_l4per_hdq1w_clkctrl,
+ (*prcm)->cm_l4per_mcbsp4_clkctrl,
+ (*prcm)->cm_l4per_mcspi2_clkctrl,
+ (*prcm)->cm_l4per_mcspi3_clkctrl,
+ (*prcm)->cm_l4per_mcspi4_clkctrl,
+ (*prcm)->cm_l4per_mmcsd3_clkctrl,
+ (*prcm)->cm_l4per_mmcsd4_clkctrl,
+ (*prcm)->cm_l4per_mmcsd5_clkctrl,
+ (*prcm)->cm_l4per_uart1_clkctrl,
+ (*prcm)->cm_l4per_uart2_clkctrl,
+ (*prcm)->cm_l4per_uart4_clkctrl,
+ (*prcm)->cm_wkup_keyboard_clkctrl,
+ (*prcm)->cm_wkup_wdtimer2_clkctrl,
+ (*prcm)->cm_cam_iss_clkctrl,
+ (*prcm)->cm_cam_fdif_clkctrl,
+ (*prcm)->cm_dss_dss_clkctrl,
+ (*prcm)->cm_sgx_sgx_clkctrl,
+ 0
+ };
+
+ /* Enable optional functional clock for ISS */
+ setbits_le32((*prcm)->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK);
+
+ /* Enable all optional functional clocks of DSS */
+ setbits_le32((*prcm)->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK);
+
+ do_enable_clocks(clk_domains_non_essential,
+ clk_modules_hw_auto_non_essential,
+ clk_modules_explicit_en_non_essential,
+ 0);
+
+ /* Put camera module in no sleep mode */
+ clrsetbits_le32((*prcm)->cm_cam_clkstctrl,
+ MODULE_CLKCTRL_MODULEMODE_MASK,
+ CD_CLKCTRL_CLKTRCTRL_NO_SLEEP <<
+ MODULE_CLKCTRL_MODULEMODE_SHIFT);
+}
+
+void hw_data_init(void)
+{
+ u32 omap_rev = omap_revision();
+
+ (*prcm) = &omap4_prcm;
+
+ switch (omap_rev) {
+
+ case OMAP4430_ES1_0:
+ *dplls_data = &omap4430_dplls_es1;
+ *omap_vcores = &omap4430_volts_es1;
+ break;
+
+ case OMAP4430_ES2_0:
+ case OMAP4430_ES2_1:
+ case OMAP4430_ES2_2:
+ case OMAP4430_ES2_3:
+ *dplls_data = &omap4430_dplls;
+ *omap_vcores = &omap4430_volts;
+ break;
+
+ case OMAP4460_ES1_0:
+ case OMAP4460_ES1_1:
+ *dplls_data = &omap4460_dplls;
+ *omap_vcores = &omap4460_volts;
+ break;
+
+ default:
+ printf("\n INVALID OMAP REVISION ");
+ }
+
+ *ctrl = &omap4_ctrl;
+}
diff --git a/arch/arm/cpu/armv7/omap4/hwinit.c b/arch/arm/cpu/armv7/omap4/hwinit.c
index f4123aa..2db517b 100644
--- a/arch/arm/cpu/armv7/omap4/hwinit.c
+++ b/arch/arm/cpu/armv7/omap4/hwinit.c
@@ -57,10 +57,6 @@ const struct gpio_bank *const omap_gpio_bank = gpio_bank_44xx;
void do_io_settings(void)
{
u32 lpddr2io;
- struct control_lpddr2io_regs *lpddr2io_regs =
- (struct control_lpddr2io_regs *)LPDDR2_IO_REGS_BASE;
- struct omap_sys_ctrl_regs *const ctrl =
- (struct omap_sys_ctrl_regs *)SYSCTRL_GENERAL_CORE_BASE;
u32 omap4_rev = omap_revision();
@@ -72,20 +68,20 @@ void do_io_settings(void)
lpddr2io = CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN;
/* EMIF1 */
- writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_0);
- writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_1);
+ writel(lpddr2io, (*ctrl)->control_lpddr2io1_0);
+ writel(lpddr2io, (*ctrl)->control_lpddr2io1_1);
/* No pull for GR10 as per hw team's recommendation */
writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK,
- &lpddr2io_regs->control_lpddr2io1_2);
- writel(CONTROL_LPDDR2IO_3_VAL, &lpddr2io_regs->control_lpddr2io1_3);
+ (*ctrl)->control_lpddr2io1_2);
+ writel(CONTROL_LPDDR2IO_3_VAL, (*ctrl)->control_lpddr2io1_3);
/* EMIF2 */
- writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_0);
- writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_1);
+ writel(lpddr2io, (*ctrl)->control_lpddr2io2_0);
+ writel(lpddr2io, (*ctrl)->control_lpddr2io2_1);
/* No pull for GR10 as per hw team's recommendation */
writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK,
- &lpddr2io_regs->control_lpddr2io2_2);
- writel(CONTROL_LPDDR2IO_3_VAL, &lpddr2io_regs->control_lpddr2io2_3);
+ (*ctrl)->control_lpddr2io2_2);
+ writel(CONTROL_LPDDR2IO_3_VAL, (*ctrl)->control_lpddr2io2_3);
/*
* Some of these settings (TRIM values) come from eFuse and are
@@ -93,16 +89,16 @@ void do_io_settings(void)
* calibration of the device. Do the software over-ride only if
* the device is not correctly trimmed
*/
- if (!(readl(&ctrl->control_std_fuse_opp_bgap) & 0xFFFF)) {
+ if (!(readl((*ctrl)->control_std_fuse_opp_bgap) & 0xFFFF)) {
writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
- &ctrl->control_ldosram_iva_voltage_ctrl);
+ (*ctrl)->control_ldosram_iva_voltage_ctrl);
writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
- &ctrl->control_ldosram_mpu_voltage_ctrl);
+ (*ctrl)->control_ldosram_mpu_voltage_ctrl);
writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
- &ctrl->control_ldosram_core_voltage_ctrl);
+ (*ctrl)->control_ldosram_core_voltage_ctrl);
}
/*
@@ -110,11 +106,11 @@ void do_io_settings(void)
* i. unconditionally for all 4430
* ii. only if un-trimmed for 4460
*/
- if (!readl(&ctrl->control_efuse_1))
- writel(CONTROL_EFUSE_1_OVERRIDE, &ctrl->control_efuse_1);
+ if (!readl((*ctrl)->control_efuse_1))
+ writel(CONTROL_EFUSE_1_OVERRIDE, (*ctrl)->control_efuse_1);
- if ((omap4_rev < OMAP4460_ES1_0) || !readl(&ctrl->control_efuse_2))
- writel(CONTROL_EFUSE_2_OVERRIDE, &ctrl->control_efuse_2);
+ if ((omap4_rev < OMAP4460_ES1_0) || !readl((*ctrl)->control_efuse_2))
+ writel(CONTROL_EFUSE_2_OVERRIDE, (*ctrl)->control_efuse_2);
}
#endif /* CONFIG_SPL_BUILD */
diff --git a/arch/arm/cpu/armv7/omap4/prcm-regs.c b/arch/arm/cpu/armv7/omap4/prcm-regs.c
new file mode 100644
index 0000000..7225a30
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap4/prcm-regs.c
@@ -0,0 +1,315 @@
+/*
+ *
+ * HW regs data for OMAP4
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * Sricharan R <r.sricharan@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/omap_common.h>
+
+struct prcm_regs const omap4_prcm = {
+ /* cm1.ckgen */
+ .cm_clksel_core = 0x4a004100,
+ .cm_clksel_abe = 0x4a004108,
+ .cm_dll_ctrl = 0x4a004110,
+ .cm_clkmode_dpll_core = 0x4a004120,
+ .cm_idlest_dpll_core = 0x4a004124,
+ .cm_autoidle_dpll_core = 0x4a004128,
+ .cm_clksel_dpll_core = 0x4a00412c,
+ .cm_div_m2_dpll_core = 0x4a004130,
+ .cm_div_m3_dpll_core = 0x4a004134,
+ .cm_div_m4_dpll_core = 0x4a004138,
+ .cm_div_m5_dpll_core = 0x4a00413c,
+ .cm_div_m6_dpll_core = 0x4a004140,
+ .cm_div_m7_dpll_core = 0x4a004144,
+ .cm_ssc_deltamstep_dpll_core = 0x4a004148,
+ .cm_ssc_modfreqdiv_dpll_core = 0x4a00414c,
+ .cm_emu_override_dpll_core = 0x4a004150,
+ .cm_clkmode_dpll_mpu = 0x4a004160,
+ .cm_idlest_dpll_mpu = 0x4a004164,
+ .cm_autoidle_dpll_mpu = 0x4a004168,
+ .cm_clksel_dpll_mpu = 0x4a00416c,
+ .cm_div_m2_dpll_mpu = 0x4a004170,
+ .cm_ssc_deltamstep_dpll_mpu = 0x4a004188,
+ .cm_ssc_modfreqdiv_dpll_mpu = 0x4a00418c,
+ .cm_bypclk_dpll_mpu = 0x4a00419c,
+ .cm_clkmode_dpll_iva = 0x4a0041a0,
+ .cm_idlest_dpll_iva = 0x4a0041a4,
+ .cm_autoidle_dpll_iva = 0x4a0041a8,
+ .cm_clksel_dpll_iva = 0x4a0041ac,
+ .cm_div_m4_dpll_iva = 0x4a0041b8,
+ .cm_div_m5_dpll_iva = 0x4a0041bc,
+ .cm_ssc_deltamstep_dpll_iva = 0x4a0041c8,
+ .cm_ssc_modfreqdiv_dpll_iva = 0x4a0041cc,
+ .cm_bypclk_dpll_iva = 0x4a0041dc,
+ .cm_clkmode_dpll_abe = 0x4a0041e0,
+ .cm_idlest_dpll_abe = 0x4a0041e4,
+ .cm_autoidle_dpll_abe = 0x4a0041e8,
+ .cm_clksel_dpll_abe = 0x4a0041ec,
+ .cm_div_m2_dpll_abe = 0x4a0041f0,
+ .cm_div_m3_dpll_abe = 0x4a0041f4,
+ .cm_ssc_deltamstep_dpll_abe = 0x4a004208,
+ .cm_ssc_modfreqdiv_dpll_abe = 0x4a00420c,
+ .cm_clkmode_dpll_ddrphy = 0x4a004220,
+ .cm_idlest_dpll_ddrphy = 0x4a004224,
+ .cm_autoidle_dpll_ddrphy = 0x4a004228,
+ .cm_clksel_dpll_ddrphy = 0x4a00422c,
+ .cm_div_m2_dpll_ddrphy = 0x4a004230,
+ .cm_div_m4_dpll_ddrphy = 0x4a004238,
+ .cm_div_m5_dpll_ddrphy = 0x4a00423c,
+ .cm_div_m6_dpll_ddrphy = 0x4a004240,
+ .cm_ssc_deltamstep_dpll_ddrphy = 0x4a004248,
+ .cm_shadow_freq_config1 = 0x4a004260,
+ .cm_mpu_mpu_clkctrl = 0x4a004320,
+
+ /* cm1.dsp */
+ .cm_dsp_clkstctrl = 0x4a004400,
+ .cm_dsp_dsp_clkctrl = 0x4a004420,
+
+ /* cm1.abe */
+ .cm1_abe_clkstctrl = 0x4a004500,
+ .cm1_abe_l4abe_clkctrl = 0x4a004520,
+ .cm1_abe_aess_clkctrl = 0x4a004528,
+ .cm1_abe_pdm_clkctrl = 0x4a004530,
+ .cm1_abe_dmic_clkctrl = 0x4a004538,
+ .cm1_abe_mcasp_clkctrl = 0x4a004540,
+ .cm1_abe_mcbsp1_clkctrl = 0x4a004548,
+ .cm1_abe_mcbsp2_clkctrl = 0x4a004550,
+ .cm1_abe_mcbsp3_clkctrl = 0x4a004558,
+ .cm1_abe_slimbus_clkctrl = 0x4a004560,
+ .cm1_abe_timer5_clkctrl = 0x4a004568,
+ .cm1_abe_timer6_clkctrl = 0x4a004570,
+ .cm1_abe_timer7_clkctrl = 0x4a004578,
+ .cm1_abe_timer8_clkctrl = 0x4a004580,
+ .cm1_abe_wdt3_clkctrl = 0x4a004588,
+
+ /* cm2.ckgen */
+ .cm_clksel_mpu_m3_iss_root = 0x4a008100,
+ .cm_clksel_usb_60mhz = 0x4a008104,
+ .cm_scale_fclk = 0x4a008108,
+ .cm_core_dvfs_perf1 = 0x4a008110,
+ .cm_core_dvfs_perf2 = 0x4a008114,
+ .cm_core_dvfs_perf3 = 0x4a008118,
+ .cm_core_dvfs_perf4 = 0x4a00811c,
+ .cm_core_dvfs_current = 0x4a008124,
+ .cm_iva_dvfs_perf_tesla = 0x4a008128,
+ .cm_iva_dvfs_perf_ivahd = 0x4a00812c,
+ .cm_iva_dvfs_perf_abe = 0x4a008130,
+ .cm_iva_dvfs_current = 0x4a008138,
+ .cm_clkmode_dpll_per = 0x4a008140,
+ .cm_idlest_dpll_per = 0x4a008144,
+ .cm_autoidle_dpll_per = 0x4a008148,
+ .cm_clksel_dpll_per = 0x4a00814c,
+ .cm_div_m2_dpll_per = 0x4a008150,
+ .cm_div_m3_dpll_per = 0x4a008154,
+ .cm_div_m4_dpll_per = 0x4a008158,
+ .cm_div_m5_dpll_per = 0x4a00815c,
+ .cm_div_m6_dpll_per = 0x4a008160,
+ .cm_div_m7_dpll_per = 0x4a008164,
+ .cm_ssc_deltamstep_dpll_per = 0x4a008168,
+ .cm_ssc_modfreqdiv_dpll_per = 0x4a00816c,
+ .cm_emu_override_dpll_per = 0x4a008170,
+ .cm_clkmode_dpll_usb = 0x4a008180,
+ .cm_idlest_dpll_usb = 0x4a008184,
+ .cm_autoidle_dpll_usb = 0x4a008188,
+ .cm_clksel_dpll_usb = 0x4a00818c,
+ .cm_div_m2_dpll_usb = 0x4a008190,
+ .cm_ssc_deltamstep_dpll_usb = 0x4a0081a8,
+ .cm_ssc_modfreqdiv_dpll_usb = 0x4a0081ac,
+ .cm_clkdcoldo_dpll_usb = 0x4a0081b4,
+ .cm_clkmode_dpll_unipro = 0x4a0081c0,
+ .cm_idlest_dpll_unipro = 0x4a0081c4,
+ .cm_autoidle_dpll_unipro = 0x4a0081c8,
+ .cm_clksel_dpll_unipro = 0x4a0081cc,
+ .cm_div_m2_dpll_unipro = 0x4a0081d0,
+ .cm_ssc_deltamstep_dpll_unipro = 0x4a0081e8,
+ .cm_ssc_modfreqdiv_dpll_unipro = 0x4a0081ec,
+
+ /* cm2.core */
+ .cm_l3_1_clkstctrl = 0x4a008700,
+ .cm_l3_1_dynamicdep = 0x4a008708,
+ .cm_l3_1_l3_1_clkctrl = 0x4a008720,
+ .cm_l3_2_clkstctrl = 0x4a008800,
+ .cm_l3_2_dynamicdep = 0x4a008808,
+ .cm_l3_2_l3_2_clkctrl = 0x4a008820,
+ .cm_l3_gpmc_clkctrl = 0x4a008828,
+ .cm_l3_2_ocmc_ram_clkctrl = 0x4a008830,
+ .cm_mpu_m3_clkstctrl = 0x4a008900,
+ .cm_mpu_m3_staticdep = 0x4a008904,
+ .cm_mpu_m3_dynamicdep = 0x4a008908,
+ .cm_mpu_m3_mpu_m3_clkctrl = 0x4a008920,
+ .cm_sdma_clkstctrl = 0x4a008a00,
+ .cm_sdma_staticdep = 0x4a008a04,
+ .cm_sdma_dynamicdep = 0x4a008a08,
+ .cm_sdma_sdma_clkctrl = 0x4a008a20,
+ .cm_memif_clkstctrl = 0x4a008b00,
+ .cm_memif_dmm_clkctrl = 0x4a008b20,
+ .cm_memif_emif_fw_clkctrl = 0x4a008b28,
+ .cm_memif_emif_1_clkctrl = 0x4a008b30,
+ .cm_memif_emif_2_clkctrl = 0x4a008b38,
+ .cm_memif_dll_clkctrl = 0x4a008b40,
+ .cm_memif_emif_h1_clkctrl = 0x4a008b50,
+ .cm_memif_emif_h2_clkctrl = 0x4a008b58,
+ .cm_memif_dll_h_clkctrl = 0x4a008b60,
+ .cm_c2c_clkstctrl = 0x4a008c00,
+ .cm_c2c_staticdep = 0x4a008c04,
+ .cm_c2c_dynamicdep = 0x4a008c08,
+ .cm_c2c_sad2d_clkctrl = 0x4a008c20,
+ .cm_c2c_modem_icr_clkctrl = 0x4a008c28,
+ .cm_c2c_sad2d_fw_clkctrl = 0x4a008c30,
+ .cm_l4cfg_clkstctrl = 0x4a008d00,
+ .cm_l4cfg_dynamicdep = 0x4a008d08,
+ .cm_l4cfg_l4_cfg_clkctrl = 0x4a008d20,
+ .cm_l4cfg_hw_sem_clkctrl = 0x4a008d28,
+ .cm_l4cfg_mailbox_clkctrl = 0x4a008d30,
+ .cm_l4cfg_sar_rom_clkctrl = 0x4a008d38,
+ .cm_l3instr_clkstctrl = 0x4a008e00,
+ .cm_l3instr_l3_3_clkctrl = 0x4a008e20,
+ .cm_l3instr_l3_instr_clkctrl = 0x4a008e28,
+ .cm_l3instr_intrconn_wp1_clkct = 0x4a008e40,
+ .cm_ivahd_clkstctrl = 0x4a008f00,
+
+ /* cm2.ivahd */
+ .cm_ivahd_ivahd_clkctrl = 0x4a008f20,
+ .cm_ivahd_sl2_clkctrl = 0x4a008f28,
+
+ /* cm2.cam */
+ .cm_cam_clkstctrl = 0x4a009000,
+ .cm_cam_iss_clkctrl = 0x4a009020,
+ .cm_cam_fdif_clkctrl = 0x4a009028,
+
+ /* cm2.dss */
+ .cm_dss_clkstctrl = 0x4a009100,
+ .cm_dss_dss_clkctrl = 0x4a009120,
+
+ /* cm2.sgx */
+ .cm_sgx_clkstctrl = 0x4a009200,
+ .cm_sgx_sgx_clkctrl = 0x4a009220,
+
+ /* cm2.l3init */
+ .cm_l3init_clkstctrl = 0x4a009300,
+ .cm_l3init_hsmmc1_clkctrl = 0x4a009328,
+ .cm_l3init_hsmmc2_clkctrl = 0x4a009330,
+ .cm_l3init_hsi_clkctrl = 0x4a009338,
+ .cm_l3init_hsusbhost_clkctrl = 0x4a009358,
+ .cm_l3init_hsusbotg_clkctrl = 0x4a009360,
+ .cm_l3init_hsusbtll_clkctrl = 0x4a009368,
+ .cm_l3init_p1500_clkctrl = 0x4a009378,
+ .cm_l3init_fsusb_clkctrl = 0x4a0093d0,
+ .cm_l3init_usbphy_clkctrl = 0x4a0093e0,
+
+ /* cm2.l4per */
+ .cm_l4per_clkstctrl = 0x4a009400,
+ .cm_l4per_dynamicdep = 0x4a009408,
+ .cm_l4per_adc_clkctrl = 0x4a009420,
+ .cm_l4per_gptimer10_clkctrl = 0x4a009428,
+ .cm_l4per_gptimer11_clkctrl = 0x4a009430,
+ .cm_l4per_gptimer2_clkctrl = 0x4a009438,
+ .cm_l4per_gptimer3_clkctrl = 0x4a009440,
+ .cm_l4per_gptimer4_clkctrl = 0x4a009448,
+ .cm_l4per_gptimer9_clkctrl = 0x4a009450,
+ .cm_l4per_elm_clkctrl = 0x4a009458,
+ .cm_l4per_gpio2_clkctrl = 0x4a009460,
+ .cm_l4per_gpio3_clkctrl = 0x4a009468,
+ .cm_l4per_gpio4_clkctrl = 0x4a009470,
+ .cm_l4per_gpio5_clkctrl = 0x4a009478,
+ .cm_l4per_gpio6_clkctrl = 0x4a009480,
+ .cm_l4per_hdq1w_clkctrl = 0x4a009488,
+ .cm_l4per_hecc1_clkctrl = 0x4a009490,
+ .cm_l4per_hecc2_clkctrl = 0x4a009498,
+ .cm_l4per_i2c1_clkctrl = 0x4a0094a0,
+ .cm_l4per_i2c2_clkctrl = 0x4a0094a8,
+ .cm_l4per_i2c3_clkctrl = 0x4a0094b0,
+ .cm_l4per_i2c4_clkctrl = 0x4a0094b8,
+ .cm_l4per_l4per_clkctrl = 0x4a0094c0,
+ .cm_l4per_mcasp2_clkctrl = 0x4a0094d0,
+ .cm_l4per_mcasp3_clkctrl = 0x4a0094d8,
+ .cm_l4per_mcbsp4_clkctrl = 0x4a0094e0,
+ .cm_l4per_mgate_clkctrl = 0x4a0094e8,
+ .cm_l4per_mcspi1_clkctrl = 0x4a0094f0,
+ .cm_l4per_mcspi2_clkctrl = 0x4a0094f8,
+ .cm_l4per_mcspi3_clkctrl = 0x4a009500,
+ .cm_l4per_mcspi4_clkctrl = 0x4a009508,
+ .cm_l4per_mmcsd3_clkctrl = 0x4a009520,
+ .cm_l4per_mmcsd4_clkctrl = 0x4a009528,
+ .cm_l4per_msprohg_clkctrl = 0x4a009530,
+ .cm_l4per_slimbus2_clkctrl = 0x4a009538,
+ .cm_l4per_uart1_clkctrl = 0x4a009540,
+ .cm_l4per_uart2_clkctrl = 0x4a009548,
+ .cm_l4per_uart3_clkctrl = 0x4a009550,
+ .cm_l4per_uart4_clkctrl = 0x4a009558,
+ .cm_l4per_mmcsd5_clkctrl = 0x4a009560,
+ .cm_l4per_i2c5_clkctrl = 0x4a009568,
+ .cm_l4sec_clkstctrl = 0x4a009580,
+ .cm_l4sec_staticdep = 0x4a009584,
+ .cm_l4sec_dynamicdep = 0x4a009588,
+ .cm_l4sec_aes1_clkctrl = 0x4a0095a0,
+ .cm_l4sec_aes2_clkctrl = 0x4a0095a8,
+ .cm_l4sec_des3des_clkctrl = 0x4a0095b0,
+ .cm_l4sec_pkaeip29_clkctrl = 0x4a0095b8,
+ .cm_l4sec_rng_clkctrl = 0x4a0095c0,
+ .cm_l4sec_sha2md51_clkctrl = 0x4a0095c8,
+ .cm_l4sec_cryptodma_clkctrl = 0x4a0095d8,
+
+ /* l4 wkup regs */
+ .cm_abe_pll_ref_clksel = 0x4a30610c,
+ .cm_sys_clksel = 0x4a306110,
+ .cm_wkup_clkstctrl = 0x4a307800,
+ .cm_wkup_l4wkup_clkctrl = 0x4a307820,
+ .cm_wkup_wdtimer1_clkctrl = 0x4a307828,
+ .cm_wkup_wdtimer2_clkctrl = 0x4a307830,
+ .cm_wkup_gpio1_clkctrl = 0x4a307838,
+ .cm_wkup_gptimer1_clkctrl = 0x4a307840,
+ .cm_wkup_gptimer12_clkctrl = 0x4a307848,
+ .cm_wkup_synctimer_clkctrl = 0x4a307850,
+ .cm_wkup_usim_clkctrl = 0x4a307858,
+ .cm_wkup_sarram_clkctrl = 0x4a307860,
+ .cm_wkup_keyboard_clkctrl = 0x4a307878,
+ .cm_wkup_rtc_clkctrl = 0x4a307880,
+ .cm_wkup_bandgap_clkctrl = 0x4a307888,
+ .prm_vc_val_bypass = 0x4a307ba0,
+ .prm_vc_cfg_channel = 0x4a307ba4,
+ .prm_vc_cfg_i2c_mode = 0x4a307ba8,
+ .prm_vc_cfg_i2c_clk = 0x4a307bac,
+};
+
+struct omap_sys_ctrl_regs const omap4_ctrl = {
+ .control_id_code = 0x4A002204,
+ .control_std_fuse_opp_bgap = 0x4a002260,
+ .control_status = 0x4a0022c4,
+ .control_ldosram_iva_voltage_ctrl = 0x4A002320,
+ .control_ldosram_mpu_voltage_ctrl = 0x4A002324,
+ .control_ldosram_core_voltage_ctrl = 0x4A002328,
+ .control_pbiaslite = 0x4A100600,
+ .control_lpddr2io1_0 = 0x4A100638,
+ .control_lpddr2io1_1 = 0x4A10063C,
+ .control_lpddr2io1_2 = 0x4A100640,
+ .control_lpddr2io1_3 = 0x4A100644,
+ .control_lpddr2io2_0 = 0x4A100648,
+ .control_lpddr2io2_1 = 0x4A10064C,
+ .control_lpddr2io2_2 = 0x4A100650,
+ .control_lpddr2io2_3 = 0x4A100654,
+ .control_efuse_1 = 0x4A100700,
+ .control_efuse_2 = 0x4A100704,
+};
diff --git a/arch/arm/cpu/armv7/omap4/sdram_elpida.c b/arch/arm/cpu/armv7/omap4/sdram_elpida.c
index b9128fa..20fc552 100644
--- a/arch/arm/cpu/armv7/omap4/sdram_elpida.c
+++ b/arch/arm/cpu/armv7/omap4/sdram_elpida.c
@@ -90,21 +90,28 @@ const struct emif_regs emif_regs_elpida_400_mhz_2cs = {
.emif_ddr_phy_ctlr_1 = 0x049ff418
};
-/* Dummy registers for OMAP44xx */
-const u32 ddr3_ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG];
-
const struct dmm_lisa_map_regs lisa_map_2G_x_1_x_2 = {
.dmm_lisa_map_0 = 0xFF020100,
.dmm_lisa_map_1 = 0,
.dmm_lisa_map_2 = 0,
- .dmm_lisa_map_3 = 0x80540300
+ .dmm_lisa_map_3 = 0x80540300,
+ .is_ma_present = 0x0
};
const struct dmm_lisa_map_regs lisa_map_2G_x_2_x_2 = {
.dmm_lisa_map_0 = 0xFF020100,
.dmm_lisa_map_1 = 0,
.dmm_lisa_map_2 = 0,
- .dmm_lisa_map_3 = 0x80640300
+ .dmm_lisa_map_3 = 0x80640300,
+ .is_ma_present = 0x0
+};
+
+const struct dmm_lisa_map_regs ma_lisa_map_2G_x_2_x_2 = {
+ .dmm_lisa_map_0 = 0xFF020100,
+ .dmm_lisa_map_1 = 0,
+ .dmm_lisa_map_2 = 0,
+ .dmm_lisa_map_3 = 0x80640300,
+ .is_ma_present = 0x1
};
static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs)
@@ -129,8 +136,10 @@ static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs
if (omap_rev == OMAP4430_ES1_0)
*dmm_lisa_regs = &lisa_map_2G_x_1_x_2;
- else
+ else if (omap_rev < OMAP4460_ES1_0)
*dmm_lisa_regs = &lisa_map_2G_x_2_x_2;
+ else
+ *dmm_lisa_regs = &ma_lisa_map_2G_x_2_x_2;
}
void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
@@ -284,3 +293,16 @@ void emif_get_device_timings(u32 emif_nr,
__attribute__((weak, alias("emif_get_device_timings_sdp")));
#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */
+
+const struct lpddr2_mr_regs mr_regs = {
+ .mr1 = MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3,
+ .mr2 = 0x4,
+ .mr3 = -1,
+ .mr10 = MR10_ZQ_ZQINIT,
+ .mr16 = MR16_REF_FULL_ARRAY
+};
+
+void get_lpddr2_mr_regs(const struct lpddr2_mr_regs **regs)
+{
+ *regs = &mr_regs;
+}
diff --git a/arch/arm/cpu/armv7/omap5/Makefile b/arch/arm/cpu/armv7/omap5/Makefile
index 9b261c4..ce00e2c 100644
--- a/arch/arm/cpu/armv7/omap5/Makefile
+++ b/arch/arm/cpu/armv7/omap5/Makefile
@@ -26,9 +26,10 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).o
COBJS += hwinit.o
-COBJS += clocks.o
COBJS += emif.o
COBJS += sdram.o
+COBJS += prcm-regs.o
+COBJS += hw_data.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
diff --git a/arch/arm/cpu/armv7/omap5/clocks.c b/arch/arm/cpu/armv7/omap5/clocks.c
deleted file mode 100644
index eecfbad..0000000
--- a/arch/arm/cpu/armv7/omap5/clocks.c
+++ /dev/null
@@ -1,494 +0,0 @@
-/*
- *
- * Clock initialization for OMAP5
- *
- * (C) Copyright 2010
- * Texas Instruments, <www.ti.com>
- *
- * Aneesh V <aneesh@ti.com>
- * Sricharan R <r.sricharan@ti.com>
- *
- * Based on previous work by:
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- * Rajendra Nayak <rnayak@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-#include <asm/omap_common.h>
-#include <asm/arch/clocks.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/utils.h>
-#include <asm/omap_gpio.h>
-
-#ifndef CONFIG_SPL_BUILD
-/*
- * printing to console doesn't work unless
- * this code is executed from SPL
- */
-#define printf(fmt, args...)
-#define puts(s)
-#endif
-
-struct omap5_prcm_regs *const prcm = (struct omap5_prcm_regs *)0x4A004100;
-
-const u32 sys_clk_array[8] = {
- 12000000, /* 12 MHz */
- 0, /* NA */
- 16800000, /* 16.8 MHz */
- 19200000, /* 19.2 MHz */
- 26000000, /* 26 MHz */
- 0, /* NA */
- 38400000, /* 38.4 MHz */
-};
-
-static const struct dpll_params mpu_dpll_params_1_5ghz[NUM_SYS_CLKS] = {
- {125, 0, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {625, 6, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
- {625, 7, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
- {750, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {625, 15, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
-};
-
-static const struct dpll_params mpu_dpll_params_2ghz[NUM_SYS_CLKS] = {
- {500, 2, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {2024, 16, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
- {625, 5, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
- {1000, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {625, 11, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
-};
-
-static const struct dpll_params mpu_dpll_params_1100mhz[NUM_SYS_CLKS] = {
- {275, 2, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {1375, 20, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
- {1375, 23, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
- {550, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {1375, 47, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
-};
-
-static const struct dpll_params mpu_dpll_params_800mhz[NUM_SYS_CLKS] = {
- {200, 2, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {1000, 20, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
- {375, 8, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
- {400, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {375, 17, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
-};
-
-static const struct dpll_params mpu_dpll_params_400mhz[NUM_SYS_CLKS] = {
- {200, 2, 2, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {1000, 20, 2, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
- {375, 8, 2, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
- {400, 12, 2, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {375, 17, 2, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
-};
-
-static const struct dpll_params mpu_dpll_params_550mhz[NUM_SYS_CLKS] = {
- {275, 2, 2, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {1375, 20, 2, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
- {1375, 23, 2, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
- {550, 12, 2, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {1375, 47, 2, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
-};
-
-static const struct dpll_params
- core_dpll_params_2128mhz_ddr532[NUM_SYS_CLKS] = {
- {266, 2, 2, 5, 8, 4, 62, 5, 5, 7}, /* 12 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {570, 8, 2, 5, 8, 4, 62, 5, 5, 7}, /* 16.8 MHz */
- {665, 11, 2, 5, 8, 4, 62, 5, 5, 7}, /* 19.2 MHz */
- {532, 12, 2, 5, 8, 4, 62, 5, 5, 7}, /* 26 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {665, 23, 2, 5, 8, 4, 62, 5, 5, 7} /* 38.4 MHz */
-};
-
-static const struct dpll_params
- core_dpll_params_2128mhz_ddr266[NUM_SYS_CLKS] = {
- {266, 2, 4, 5, 8, 8, 62, 10, 10, 14}, /* 12 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {570, 8, 4, 5, 8, 8, 62, 10, 10, 14}, /* 16.8 MHz */
- {665, 11, 4, 5, 8, 8, 62, 10, 10, 14}, /* 19.2 MHz */
- {532, 12, 4, 8, 8, 8, 62, 10, 10, 14}, /* 26 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {665, 23, 4, 8, 8, 8, 62, 10, 10, 14} /* 38.4 MHz */
-};
-
-static const struct dpll_params per_dpll_params_768mhz[NUM_SYS_CLKS] = {
- {32, 0, 4, 3, 6, 4, -1, 2, -1, -1}, /* 12 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {160, 6, 4, 3, 6, 4, -1, 2, -1, -1}, /* 16.8 MHz */
- {20, 0, 4, 3, 6, 4, -1, 2, -1, -1}, /* 19.2 MHz */
- {192, 12, 4, 3, 6, 4, -1, 2, -1, -1}, /* 26 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {10, 0, 4, 3, 6, 4, -1, 2, -1, -1} /* 38.4 MHz */
-};
-
-static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = {
- {1165, 11, -1, -1, 5, 6, -1, -1, -1, -1}, /* 12 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {2011, 28, -1, -1, 5, 6, -1, -1, -1, -1}, /* 16.8 MHz */
- {1881, 30, -1, -1, 5, 6, -1, -1, -1, -1}, /* 19.2 MHz */
- {1165, 25, -1, -1, 5, 6, -1, -1, -1, -1}, /* 26 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {1972, 64, -1, -1, 5, 6, -1, -1, -1, -1} /* 38.4 MHz */
-};
-
-/* ABE M & N values with sys_clk as source */
-static const struct dpll_params
- abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = {
- {49, 5, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {35, 5, 1, 1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
- {46, 8, 1, 1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
- {34, 8, 1, 1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {64, 24, 1, 1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
-};
-
-/* ABE M & N values with 32K clock as source */
-static const struct dpll_params abe_dpll_params_32k_196608khz = {
- 750, 0, 1, 1, -1, -1, -1, -1, -1, -1
-};
-
-static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = {
- {400, 4, 2, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {400, 6, 2, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
- {400, 7, 2, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
- {480, 12, 2, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {400, 15, 2, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
-};
-
-void setup_post_dividers(u32 *const base, const struct dpll_params *params)
-{
- struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
-
- /* Setup post-dividers */
- if (params->m2 >= 0)
- writel(params->m2, &dpll_regs->cm_div_m2_dpll);
- if (params->m3 >= 0)
- writel(params->m3, &dpll_regs->cm_div_m3_dpll);
- if (params->h11 >= 0)
- writel(params->h11, &dpll_regs->cm_div_h11_dpll);
- if (params->h12 >= 0)
- writel(params->h12, &dpll_regs->cm_div_h12_dpll);
- if (params->h13 >= 0)
- writel(params->h13, &dpll_regs->cm_div_h13_dpll);
- if (params->h14 >= 0)
- writel(params->h14, &dpll_regs->cm_div_h14_dpll);
- if (params->h22 >= 0)
- writel(params->h22, &dpll_regs->cm_div_h22_dpll);
- if (params->h23 >= 0)
- writel(params->h23, &dpll_regs->cm_div_h23_dpll);
-}
-
-const struct dpll_params *get_mpu_dpll_params(void)
-{
- u32 sysclk_ind = get_sys_clk_index();
- return &mpu_dpll_params_800mhz[sysclk_ind];
-}
-
-const struct dpll_params *get_core_dpll_params(void)
-{
- u32 sysclk_ind = get_sys_clk_index();
-
- /* Configuring the DDR to be at 532mhz */
- return &core_dpll_params_2128mhz_ddr532[sysclk_ind];
-}
-
-const struct dpll_params *get_per_dpll_params(void)
-{
- u32 sysclk_ind = get_sys_clk_index();
- return &per_dpll_params_768mhz[sysclk_ind];
-}
-
-const struct dpll_params *get_iva_dpll_params(void)
-{
- u32 sysclk_ind = get_sys_clk_index();
- return &iva_dpll_params_2330mhz[sysclk_ind];
-}
-
-const struct dpll_params *get_usb_dpll_params(void)
-{
- u32 sysclk_ind = get_sys_clk_index();
- return &usb_dpll_params_1920mhz[sysclk_ind];
-}
-
-const struct dpll_params *get_abe_dpll_params(void)
-{
-#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
- u32 sysclk_ind = get_sys_clk_index();
- return &abe_dpll_params_sysclk_196608khz[sysclk_ind];
-#else
- return &abe_dpll_params_32k_196608khz;
-#endif
-}
-
-/*
- * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva
- * We set the maximum voltages allowed here because Smart-Reflex is not
- * enabled in bootloader. Voltage initialization in the kernel will set
- * these to the nominal values after enabling Smart-Reflex
- */
-void scale_vcores(void)
-{
- u32 volt_core, volt_mpu, volt_mm;
-
- omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ);
-
- /* Palmas settings */
- if (omap_revision() != OMAP5432_ES1_0) {
- volt_core = VDD_CORE;
- volt_mpu = VDD_MPU;
- volt_mm = VDD_MM;
- } else {
- volt_core = VDD_CORE_5432;
- volt_mpu = VDD_MPU_5432;
- volt_mm = VDD_MM_5432;
- }
-
- do_scale_vcore(SMPS_REG_ADDR_8_CORE, volt_core);
- do_scale_vcore(SMPS_REG_ADDR_12_MPU, volt_mpu);
- do_scale_vcore(SMPS_REG_ADDR_45_IVA, volt_mm);
-
- if (omap_revision() == OMAP5432_ES1_0) {
- /* Configure LDO SRAM "magic" bits */
- writel(2, &prcm->prm_sldo_core_setup);
- writel(2, &prcm->prm_sldo_mpu_setup);
- writel(2, &prcm->prm_sldo_mm_setup);
- }
-}
-
-u32 get_offset_code(u32 volt_offset)
-{
- u32 offset_code, step = 10000; /* 10 mV represented in uV */
-
- volt_offset -= PALMAS_SMPS_BASE_VOLT_UV;
-
- offset_code = (volt_offset + step - 1) / step;
-
- /*
- * Offset codes 1-6 all give the base voltage in Palmas
- * Offset code 0 switches OFF the SMPS
- */
- return offset_code + 6;
-}
-
-/*
- * Enable essential clock domains, modules and
- * do some additional special settings needed
- */
-void enable_basic_clocks(void)
-{
- u32 *const clk_domains_essential[] = {
- &prcm->cm_l4per_clkstctrl,
- &prcm->cm_l3init_clkstctrl,
- &prcm->cm_memif_clkstctrl,
- &prcm->cm_l4cfg_clkstctrl,
- 0
- };
-
- u32 *const clk_modules_hw_auto_essential[] = {
- &prcm->cm_l3_2_gpmc_clkctrl,
- &prcm->cm_memif_emif_1_clkctrl,
- &prcm->cm_memif_emif_2_clkctrl,
- &prcm->cm_l4cfg_l4_cfg_clkctrl,
- &prcm->cm_wkup_gpio1_clkctrl,
- &prcm->cm_l4per_gpio2_clkctrl,
- &prcm->cm_l4per_gpio3_clkctrl,
- &prcm->cm_l4per_gpio4_clkctrl,
- &prcm->cm_l4per_gpio5_clkctrl,
- &prcm->cm_l4per_gpio6_clkctrl,
- 0
- };
-
- u32 *const clk_modules_explicit_en_essential[] = {
- &prcm->cm_wkup_gptimer1_clkctrl,
- &prcm->cm_l3init_hsmmc1_clkctrl,
- &prcm->cm_l3init_hsmmc2_clkctrl,
- &prcm->cm_l4per_gptimer2_clkctrl,
- &prcm->cm_wkup_wdtimer2_clkctrl,
- &prcm->cm_l4per_uart3_clkctrl,
- &prcm->cm_l4per_i2c1_clkctrl,
- 0
- };
-
- /* Enable optional additional functional clock for GPIO4 */
- setbits_le32(&prcm->cm_l4per_gpio4_clkctrl,
- GPIO4_CLKCTRL_OPTFCLKEN_MASK);
-
- /* Enable 96 MHz clock for MMC1 & MMC2 */
- setbits_le32(&prcm->cm_l3init_hsmmc1_clkctrl,
- HSMMC_CLKCTRL_CLKSEL_MASK);
- setbits_le32(&prcm->cm_l3init_hsmmc2_clkctrl,
- HSMMC_CLKCTRL_CLKSEL_MASK);
-
- /* Set the correct clock dividers for mmc */
- setbits_le32(&prcm->cm_l3init_hsmmc1_clkctrl,
- HSMMC_CLKCTRL_CLKSEL_DIV_MASK);
- setbits_le32(&prcm->cm_l3init_hsmmc2_clkctrl,
- HSMMC_CLKCTRL_CLKSEL_DIV_MASK);
-
- /* Select 32KHz clock as the source of GPTIMER1 */
- setbits_le32(&prcm->cm_wkup_gptimer1_clkctrl,
- GPTIMER1_CLKCTRL_CLKSEL_MASK);
-
- do_enable_clocks(clk_domains_essential,
- clk_modules_hw_auto_essential,
- clk_modules_explicit_en_essential,
- 1);
-
- /* Select 384Mhz for GPU as its the POR for ES1.0 */
- setbits_le32(&prcm->cm_sgx_sgx_clkctrl,
- CLKSEL_GPU_HYD_GCLK_MASK);
- setbits_le32(&prcm->cm_sgx_sgx_clkctrl,
- CLKSEL_GPU_CORE_GCLK_MASK);
-
- /* Enable SCRM OPT clocks for PER and CORE dpll */
- setbits_le32(&prcm->cm_wkupaon_scrm_clkctrl,
- OPTFCLKEN_SCRM_PER_MASK);
- setbits_le32(&prcm->cm_wkupaon_scrm_clkctrl,
- OPTFCLKEN_SCRM_CORE_MASK);
-}
-
-void enable_basic_uboot_clocks(void)
-{
- u32 *const clk_domains_essential[] = {
- 0
- };
-
- u32 *const clk_modules_hw_auto_essential[] = {
- 0
- };
-
- u32 *const clk_modules_explicit_en_essential[] = {
- &prcm->cm_l4per_mcspi1_clkctrl,
- &prcm->cm_l4per_i2c2_clkctrl,
- &prcm->cm_l4per_i2c3_clkctrl,
- &prcm->cm_l4per_i2c4_clkctrl,
- &prcm->cm_l3init_hsusbtll_clkctrl,
- &prcm->cm_l3init_hsusbhost_clkctrl,
- &prcm->cm_l3init_fsusb_clkctrl,
- 0
- };
-
- do_enable_clocks(clk_domains_essential,
- clk_modules_hw_auto_essential,
- clk_modules_explicit_en_essential,
- 1);
-}
-
-/*
- * Enable non-essential clock domains, modules and
- * do some additional special settings needed
- */
-void enable_non_essential_clocks(void)
-{
- u32 *const clk_domains_non_essential[] = {
- &prcm->cm_mpu_m3_clkstctrl,
- &prcm->cm_ivahd_clkstctrl,
- &prcm->cm_dsp_clkstctrl,
- &prcm->cm_dss_clkstctrl,
- &prcm->cm_sgx_clkstctrl,
- &prcm->cm1_abe_clkstctrl,
- &prcm->cm_c2c_clkstctrl,
- &prcm->cm_cam_clkstctrl,
- &prcm->cm_dss_clkstctrl,
- &prcm->cm_sdma_clkstctrl,
- 0
- };
-
- u32 *const clk_modules_hw_auto_non_essential[] = {
- &prcm->cm_mpu_m3_mpu_m3_clkctrl,
- &prcm->cm_ivahd_ivahd_clkctrl,
- &prcm->cm_ivahd_sl2_clkctrl,
- &prcm->cm_dsp_dsp_clkctrl,
- &prcm->cm_l3instr_l3_3_clkctrl,
- &prcm->cm_l3instr_l3_instr_clkctrl,
- &prcm->cm_l3instr_intrconn_wp1_clkctrl,
- &prcm->cm_l3init_hsi_clkctrl,
- &prcm->cm_l4per_hdq1w_clkctrl,
- 0
- };
-
- u32 *const clk_modules_explicit_en_non_essential[] = {
- &prcm->cm1_abe_aess_clkctrl,
- &prcm->cm1_abe_pdm_clkctrl,
- &prcm->cm1_abe_dmic_clkctrl,
- &prcm->cm1_abe_mcasp_clkctrl,
- &prcm->cm1_abe_mcbsp1_clkctrl,
- &prcm->cm1_abe_mcbsp2_clkctrl,
- &prcm->cm1_abe_mcbsp3_clkctrl,
- &prcm->cm1_abe_slimbus_clkctrl,
- &prcm->cm1_abe_timer5_clkctrl,
- &prcm->cm1_abe_timer6_clkctrl,
- &prcm->cm1_abe_timer7_clkctrl,
- &prcm->cm1_abe_timer8_clkctrl,
- &prcm->cm1_abe_wdt3_clkctrl,
- &prcm->cm_l4per_gptimer9_clkctrl,
- &prcm->cm_l4per_gptimer10_clkctrl,
- &prcm->cm_l4per_gptimer11_clkctrl,
- &prcm->cm_l4per_gptimer3_clkctrl,
- &prcm->cm_l4per_gptimer4_clkctrl,
- &prcm->cm_l4per_mcspi2_clkctrl,
- &prcm->cm_l4per_mcspi3_clkctrl,
- &prcm->cm_l4per_mcspi4_clkctrl,
- &prcm->cm_l4per_mmcsd3_clkctrl,
- &prcm->cm_l4per_mmcsd4_clkctrl,
- &prcm->cm_l4per_mmcsd5_clkctrl,
- &prcm->cm_l4per_uart1_clkctrl,
- &prcm->cm_l4per_uart2_clkctrl,
- &prcm->cm_l4per_uart4_clkctrl,
- &prcm->cm_wkup_keyboard_clkctrl,
- &prcm->cm_wkup_wdtimer2_clkctrl,
- &prcm->cm_cam_iss_clkctrl,
- &prcm->cm_cam_fdif_clkctrl,
- &prcm->cm_dss_dss_clkctrl,
- &prcm->cm_sgx_sgx_clkctrl,
- 0
- };
-
- /* Enable optional functional clock for ISS */
- setbits_le32(&prcm->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK);
-
- /* Enable all optional functional clocks of DSS */
- setbits_le32(&prcm->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK);
-
- do_enable_clocks(clk_domains_non_essential,
- clk_modules_hw_auto_non_essential,
- clk_modules_explicit_en_non_essential,
- 0);
-
- /* Put camera module in no sleep mode */
- clrsetbits_le32(&prcm->cm_cam_clkstctrl, MODULE_CLKCTRL_MODULEMODE_MASK,
- CD_CLKCTRL_CLKTRCTRL_NO_SLEEP <<
- MODULE_CLKCTRL_MODULEMODE_SHIFT);
-}
diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
new file mode 100644
index 0000000..ced274e
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap5/hw_data.c
@@ -0,0 +1,596 @@
+/*
+ *
+ * HW data initialization for OMAP5
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * Sricharan R <r.sricharan@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/omap_common.h>
+#include <asm/arch/clocks.h>
+#include <asm/omap_gpio.h>
+#include <asm/io.h>
+#include <asm/emif.h>
+
+struct prcm_regs const **prcm =
+ (struct prcm_regs const **) OMAP_SRAM_SCRATCH_PRCM_PTR;
+struct dplls const **dplls_data =
+ (struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR;
+struct vcores_data const **omap_vcores =
+ (struct vcores_data const **) OMAP_SRAM_SCRATCH_VCORES_PTR;
+struct omap_sys_ctrl_regs const **ctrl =
+ (struct omap_sys_ctrl_regs const **)OMAP5_SRAM_SCRATCH_SYS_CTRL;
+
+/* OPP HIGH FREQUENCY for ES2.0 */
+static const struct dpll_params mpu_dpll_params_1_5ghz[NUM_SYS_CLKS] = {
+ {125, 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {625, 6, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {625, 7, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {750, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {625, 15, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
+};
+
+/* OPP NOM FREQUENCY for ES2.0, OPP HIGH for ES1.0 */
+static const struct dpll_params mpu_dpll_params_1100mhz[NUM_SYS_CLKS] = {
+ {275, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {1375, 20, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {1375, 23, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {550, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {1375, 47, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
+};
+
+/* OPP NOM FREQUENCY for ES1.0 */
+static const struct dpll_params mpu_dpll_params_800mhz[NUM_SYS_CLKS] = {
+ {200, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {1000, 20, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {375, 8, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {400, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {375, 17, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
+};
+
+/* OPP LOW FREQUENCY for ES1.0 */
+static const struct dpll_params mpu_dpll_params_400mhz[NUM_SYS_CLKS] = {
+ {200, 2, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {1000, 20, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {375, 8, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {400, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {375, 17, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
+};
+
+/* OPP LOW FREQUENCY for ES2.0 */
+static const struct dpll_params mpu_dpll_params_499mhz[NUM_SYS_CLKS] = {
+ {499, 11, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {297, 9, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {493, 18, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {499, 25, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {493, 37, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
+};
+
+static const struct dpll_params mpu_dpll_params_1ghz[NUM_SYS_CLKS] = {
+ {250, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {119, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {625, 11, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {500, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {625, 23, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */
+ {50, 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 20 MHz */
+};
+
+static const struct dpll_params
+ core_dpll_params_2128mhz_ddr532[NUM_SYS_CLKS] = {
+ {266, 2, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 12 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {443, 6, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 16.8 MHz */
+ {277, 4, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 19.2 MHz */
+ {368, 8, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 26 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {277, 9, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1} /* 38.4 MHz */
+};
+
+static const struct dpll_params
+ core_dpll_params_2128mhz_ddr532_es2[NUM_SYS_CLKS] = {
+ {266, 2, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 12 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {443, 6, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 16.8 MHz */
+ {277, 4, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 19.2 MHz */
+ {368, 8, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 26 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {277, 9, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6} /* 38.4 MHz */
+};
+
+static const struct dpll_params
+ core_dpll_params_2128mhz_ddr532_dra7xx[NUM_SYS_CLKS] = {
+ {266, 2, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 12 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {443, 6, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 16.8 MHz */
+ {277, 4, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 19.2 MHz */
+ {368, 8, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 26 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {277, 9, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 38.4 MHz */
+ {266, 4, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6} /* 20 MHz */
+};
+
+static const struct dpll_params
+ core_dpll_params_2128mhz_ddr266[NUM_SYS_CLKS] = {
+ {266, 2, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1}, /* 12 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {443, 6, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1}, /* 16.8 MHz */
+ {277, 4, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1}, /* 19.2 MHz */
+ {368, 8, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1}, /* 26 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {277, 9, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1} /* 38.4 MHz */
+};
+
+static const struct dpll_params
+ core_dpll_params_2128mhz_ddr266_es2[NUM_SYS_CLKS] = {
+ {266, 2, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12}, /* 12 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {443, 6, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12}, /* 16.8 MHz */
+ {277, 4, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12}, /* 19.2 MHz */
+ {368, 8, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12}, /* 26 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {277, 9, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12} /* 38.4 MHz */
+};
+
+static const struct dpll_params per_dpll_params_768mhz[NUM_SYS_CLKS] = {
+ {32, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 12 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {160, 6, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 16.8 MHz */
+ {20, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 19.2 MHz */
+ {192, 12, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 26 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {10, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1} /* 38.4 MHz */
+};
+
+static const struct dpll_params per_dpll_params_768mhz_es2[NUM_SYS_CLKS] = {
+ {32, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 12 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {160, 6, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 16.8 MHz */
+ {20, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 19.2 MHz */
+ {192, 12, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 26 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {10, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1} /* 38.4 MHz */
+};
+
+static const struct dpll_params per_dpll_params_768mhz_dra7xx[NUM_SYS_CLKS] = {
+ {32, 0, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 12 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {160, 6, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 16.8 MHz */
+ {20, 0, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 19.2 MHz */
+ {192, 12, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 26 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {10, 0, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 38.4 MHz */
+ {96, 4, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1} /* 20 MHz */
+};
+
+static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = {
+ {1165, 11, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {208, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {182, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {224, 4, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {91, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
+};
+
+/* ABE M & N values with sys_clk as source */
+static const struct dpll_params
+ abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = {
+ {49, 5, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {35, 5, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {46, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {34, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {64, 24, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
+};
+
+/* ABE M & N values with 32K clock as source */
+static const struct dpll_params abe_dpll_params_32k_196608khz = {
+ 750, 0, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1
+};
+
+static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = {
+ {400, 4, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {400, 6, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {400, 7, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {480, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {400, 15, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */
+ {48, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 20 MHz */
+};
+
+static const struct dpll_params ddr_dpll_params_1066mhz[NUM_SYS_CLKS] = {
+ {533, 11, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {222, 6, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {111, 3, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {41, 1, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {347, 24, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */
+ {533, 19, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1} /* 20 MHz */
+};
+
+struct dplls omap5_dplls_es1 = {
+ .mpu = mpu_dpll_params_800mhz,
+ .core = core_dpll_params_2128mhz_ddr532,
+ .per = per_dpll_params_768mhz,
+ .iva = iva_dpll_params_2330mhz,
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+ .abe = abe_dpll_params_sysclk_196608khz,
+#else
+ .abe = &abe_dpll_params_32k_196608khz,
+#endif
+ .usb = usb_dpll_params_1920mhz,
+ .ddr = NULL
+};
+
+struct dplls omap5_dplls_es2 = {
+ .mpu = mpu_dpll_params_1100mhz,
+ .core = core_dpll_params_2128mhz_ddr532_es2,
+ .per = per_dpll_params_768mhz_es2,
+ .iva = iva_dpll_params_2330mhz,
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+ .abe = abe_dpll_params_sysclk_196608khz,
+#else
+ .abe = &abe_dpll_params_32k_196608khz,
+#endif
+ .usb = usb_dpll_params_1920mhz,
+ .ddr = NULL
+};
+
+struct dplls dra7xx_dplls = {
+ .mpu = mpu_dpll_params_1ghz,
+ .core = core_dpll_params_2128mhz_ddr532_dra7xx,
+ .per = per_dpll_params_768mhz_dra7xx,
+ .usb = usb_dpll_params_1920mhz,
+ .ddr = ddr_dpll_params_1066mhz,
+};
+
+struct pmic_data palmas = {
+ .base_offset = PALMAS_SMPS_BASE_VOLT_UV,
+ .step = 10000, /* 10 mV represented in uV */
+ /*
+ * Offset codes 1-6 all give the base voltage in Palmas
+ * Offset code 0 switches OFF the SMPS
+ */
+ .start_code = 6,
+};
+
+struct vcores_data omap5430_volts = {
+ .mpu.value = VDD_MPU,
+ .mpu.addr = SMPS_REG_ADDR_12_MPU,
+ .mpu.pmic = &palmas,
+
+ .core.value = VDD_CORE,
+ .core.addr = SMPS_REG_ADDR_8_CORE,
+ .core.pmic = &palmas,
+
+ .mm.value = VDD_MM,
+ .mm.addr = SMPS_REG_ADDR_45_IVA,
+ .mm.pmic = &palmas,
+};
+
+struct vcores_data omap5430_volts_es2 = {
+ .mpu.value = VDD_MPU_ES2,
+ .mpu.addr = SMPS_REG_ADDR_12_MPU,
+ .mpu.pmic = &palmas,
+
+ .core.value = VDD_CORE_ES2,
+ .core.addr = SMPS_REG_ADDR_8_CORE,
+ .core.pmic = &palmas,
+
+ .mm.value = VDD_MM_ES2,
+ .mm.addr = SMPS_REG_ADDR_45_IVA,
+ .mm.pmic = &palmas,
+};
+
+/*
+ * Enable essential clock domains, modules and
+ * do some additional special settings needed
+ */
+void enable_basic_clocks(void)
+{
+ u32 const clk_domains_essential[] = {
+ (*prcm)->cm_l4per_clkstctrl,
+ (*prcm)->cm_l3init_clkstctrl,
+ (*prcm)->cm_memif_clkstctrl,
+ (*prcm)->cm_l4cfg_clkstctrl,
+ 0
+ };
+
+ u32 const clk_modules_hw_auto_essential[] = {
+ (*prcm)->cm_l3_gpmc_clkctrl,
+ (*prcm)->cm_memif_emif_1_clkctrl,
+ (*prcm)->cm_memif_emif_2_clkctrl,
+ (*prcm)->cm_l4cfg_l4_cfg_clkctrl,
+ (*prcm)->cm_wkup_gpio1_clkctrl,
+ (*prcm)->cm_l4per_gpio2_clkctrl,
+ (*prcm)->cm_l4per_gpio3_clkctrl,
+ (*prcm)->cm_l4per_gpio4_clkctrl,
+ (*prcm)->cm_l4per_gpio5_clkctrl,
+ (*prcm)->cm_l4per_gpio6_clkctrl,
+ 0
+ };
+
+ u32 const clk_modules_explicit_en_essential[] = {
+ (*prcm)->cm_wkup_gptimer1_clkctrl,
+ (*prcm)->cm_l3init_hsmmc1_clkctrl,
+ (*prcm)->cm_l3init_hsmmc2_clkctrl,
+ (*prcm)->cm_l4per_gptimer2_clkctrl,
+ (*prcm)->cm_wkup_wdtimer2_clkctrl,
+ (*prcm)->cm_l4per_uart3_clkctrl,
+ (*prcm)->cm_l4per_i2c1_clkctrl,
+ 0
+ };
+
+ /* Enable optional additional functional clock for GPIO4 */
+ setbits_le32((*prcm)->cm_l4per_gpio4_clkctrl,
+ GPIO4_CLKCTRL_OPTFCLKEN_MASK);
+
+ /* Enable 96 MHz clock for MMC1 & MMC2 */
+ setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl,
+ HSMMC_CLKCTRL_CLKSEL_MASK);
+ setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl,
+ HSMMC_CLKCTRL_CLKSEL_MASK);
+
+ /* Set the correct clock dividers for mmc */
+ setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl,
+ HSMMC_CLKCTRL_CLKSEL_DIV_MASK);
+ setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl,
+ HSMMC_CLKCTRL_CLKSEL_DIV_MASK);
+
+ /* Select 32KHz clock as the source of GPTIMER1 */
+ setbits_le32((*prcm)->cm_wkup_gptimer1_clkctrl,
+ GPTIMER1_CLKCTRL_CLKSEL_MASK);
+
+ do_enable_clocks(clk_domains_essential,
+ clk_modules_hw_auto_essential,
+ clk_modules_explicit_en_essential,
+ 1);
+
+ /* Select 384Mhz for GPU as its the POR for ES1.0 */
+ setbits_le32((*prcm)->cm_sgx_sgx_clkctrl,
+ CLKSEL_GPU_HYD_GCLK_MASK);
+ setbits_le32((*prcm)->cm_sgx_sgx_clkctrl,
+ CLKSEL_GPU_CORE_GCLK_MASK);
+
+ /* Enable SCRM OPT clocks for PER and CORE dpll */
+ setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl,
+ OPTFCLKEN_SCRM_PER_MASK);
+ setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl,
+ OPTFCLKEN_SCRM_CORE_MASK);
+}
+
+void enable_basic_uboot_clocks(void)
+{
+ u32 const clk_domains_essential[] = {
+ 0
+ };
+
+ u32 const clk_modules_hw_auto_essential[] = {
+ 0
+ };
+
+ u32 const clk_modules_explicit_en_essential[] = {
+ (*prcm)->cm_l4per_mcspi1_clkctrl,
+ (*prcm)->cm_l4per_i2c2_clkctrl,
+ (*prcm)->cm_l4per_i2c3_clkctrl,
+ (*prcm)->cm_l4per_i2c4_clkctrl,
+ (*prcm)->cm_l3init_hsusbtll_clkctrl,
+ (*prcm)->cm_l3init_hsusbhost_clkctrl,
+ (*prcm)->cm_l3init_fsusb_clkctrl,
+ 0
+ };
+
+ do_enable_clocks(clk_domains_essential,
+ clk_modules_hw_auto_essential,
+ clk_modules_explicit_en_essential,
+ 1);
+}
+
+/*
+ * Enable non-essential clock domains, modules and
+ * do some additional special settings needed
+ */
+void enable_non_essential_clocks(void)
+{
+ u32 const clk_domains_non_essential[] = {
+ (*prcm)->cm_mpu_m3_clkstctrl,
+ (*prcm)->cm_ivahd_clkstctrl,
+ (*prcm)->cm_dsp_clkstctrl,
+ (*prcm)->cm_dss_clkstctrl,
+ (*prcm)->cm_sgx_clkstctrl,
+ (*prcm)->cm1_abe_clkstctrl,
+ (*prcm)->cm_c2c_clkstctrl,
+ (*prcm)->cm_cam_clkstctrl,
+ (*prcm)->cm_dss_clkstctrl,
+ (*prcm)->cm_sdma_clkstctrl,
+ 0
+ };
+
+ u32 const clk_modules_hw_auto_non_essential[] = {
+ (*prcm)->cm_mpu_m3_mpu_m3_clkctrl,
+ (*prcm)->cm_ivahd_ivahd_clkctrl,
+ (*prcm)->cm_ivahd_sl2_clkctrl,
+ (*prcm)->cm_dsp_dsp_clkctrl,
+ (*prcm)->cm_l3instr_l3_3_clkctrl,
+ (*prcm)->cm_l3instr_l3_instr_clkctrl,
+ (*prcm)->cm_l3instr_intrconn_wp1_clkctrl,
+ (*prcm)->cm_l3init_hsi_clkctrl,
+ (*prcm)->cm_l4per_hdq1w_clkctrl,
+ 0
+ };
+
+ u32 const clk_modules_explicit_en_non_essential[] = {
+ (*prcm)->cm1_abe_aess_clkctrl,
+ (*prcm)->cm1_abe_pdm_clkctrl,
+ (*prcm)->cm1_abe_dmic_clkctrl,
+ (*prcm)->cm1_abe_mcasp_clkctrl,
+ (*prcm)->cm1_abe_mcbsp1_clkctrl,
+ (*prcm)->cm1_abe_mcbsp2_clkctrl,
+ (*prcm)->cm1_abe_mcbsp3_clkctrl,
+ (*prcm)->cm1_abe_slimbus_clkctrl,
+ (*prcm)->cm1_abe_timer5_clkctrl,
+ (*prcm)->cm1_abe_timer6_clkctrl,
+ (*prcm)->cm1_abe_timer7_clkctrl,
+ (*prcm)->cm1_abe_timer8_clkctrl,
+ (*prcm)->cm1_abe_wdt3_clkctrl,
+ (*prcm)->cm_l4per_gptimer9_clkctrl,
+ (*prcm)->cm_l4per_gptimer10_clkctrl,
+ (*prcm)->cm_l4per_gptimer11_clkctrl,
+ (*prcm)->cm_l4per_gptimer3_clkctrl,
+ (*prcm)->cm_l4per_gptimer4_clkctrl,
+ (*prcm)->cm_l4per_mcspi2_clkctrl,
+ (*prcm)->cm_l4per_mcspi3_clkctrl,
+ (*prcm)->cm_l4per_mcspi4_clkctrl,
+ (*prcm)->cm_l4per_mmcsd3_clkctrl,
+ (*prcm)->cm_l4per_mmcsd4_clkctrl,
+ (*prcm)->cm_l4per_mmcsd5_clkctrl,
+ (*prcm)->cm_l4per_uart1_clkctrl,
+ (*prcm)->cm_l4per_uart2_clkctrl,
+ (*prcm)->cm_l4per_uart4_clkctrl,
+ (*prcm)->cm_wkup_keyboard_clkctrl,
+ (*prcm)->cm_wkup_wdtimer2_clkctrl,
+ (*prcm)->cm_cam_iss_clkctrl,
+ (*prcm)->cm_cam_fdif_clkctrl,
+ (*prcm)->cm_dss_dss_clkctrl,
+ (*prcm)->cm_sgx_sgx_clkctrl,
+ 0
+ };
+
+ /* Enable optional functional clock for ISS */
+ setbits_le32((*prcm)->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK);
+
+ /* Enable all optional functional clocks of DSS */
+ setbits_le32((*prcm)->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK);
+
+ do_enable_clocks(clk_domains_non_essential,
+ clk_modules_hw_auto_non_essential,
+ clk_modules_explicit_en_non_essential,
+ 0);
+
+ /* Put camera module in no sleep mode */
+ clrsetbits_le32((*prcm)->cm_cam_clkstctrl,
+ MODULE_CLKCTRL_MODULEMODE_MASK,
+ CD_CLKCTRL_CLKTRCTRL_NO_SLEEP <<
+ MODULE_CLKCTRL_MODULEMODE_SHIFT);
+}
+
+const struct ctrl_ioregs ioregs_omap5430 = {
+ .ctrl_ddrch = DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
+ .ctrl_lpddr2ch = DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN,
+ .ctrl_ddrio_0 = DDR_IO_0_DDR2_DQ_INT_EN_ALL_DDR3_CA_DIS_ALL,
+ .ctrl_ddrio_1 = DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL,
+ .ctrl_ddrio_2 = DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL,
+};
+
+const struct ctrl_ioregs ioregs_omap5432_es1 = {
+ .ctrl_ddrch = DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
+ .ctrl_lpddr2ch = 0x0,
+ .ctrl_ddr3ch = DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL,
+ .ctrl_ddrio_0 = DDR_IO_0_VREF_CELLS_DDR3_VALUE,
+ .ctrl_ddrio_1 = DDR_IO_1_VREF_CELLS_DDR3_VALUE,
+ .ctrl_ddrio_2 = DDR_IO_2_VREF_CELLS_DDR3_VALUE,
+ .ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
+};
+
+const struct ctrl_ioregs ioregs_omap5432_es2 = {
+ .ctrl_ddrch = DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2,
+ .ctrl_lpddr2ch = 0x0,
+ .ctrl_ddr3ch = DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2,
+ .ctrl_ddrio_0 = DDR_IO_0_VREF_CELLS_DDR3_VALUE_ES2,
+ .ctrl_ddrio_1 = DDR_IO_1_VREF_CELLS_DDR3_VALUE_ES2,
+ .ctrl_ddrio_2 = DDR_IO_2_VREF_CELLS_DDR3_VALUE_ES2,
+ .ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
+};
+
+void hw_data_init(void)
+{
+ u32 omap_rev = omap_revision();
+
+ switch (omap_rev) {
+
+ case OMAP5430_ES1_0:
+ case OMAP5432_ES1_0:
+ *prcm = &omap5_es1_prcm;
+ *dplls_data = &omap5_dplls_es1;
+ *omap_vcores = &omap5430_volts;
+ *ctrl = &omap5_ctrl;
+ break;
+
+ case OMAP5430_ES2_0:
+ case OMAP5432_ES2_0:
+ *prcm = &omap5_es2_prcm;
+ *dplls_data = &omap5_dplls_es2;
+ *omap_vcores = &omap5430_volts_es2;
+ *ctrl = &omap5_ctrl;
+ break;
+
+ case DRA752_ES1_0:
+ *prcm = &dra7xx_prcm;
+ *dplls_data = &dra7xx_dplls;
+ *omap_vcores = &omap5430_volts_es2;
+ *ctrl = &dra7xx_ctrl;
+ break;
+
+ default:
+ printf("\n INVALID OMAP REVISION ");
+ }
+}
+
+void get_ioregs(const struct ctrl_ioregs **regs)
+{
+ u32 omap_rev = omap_revision();
+
+ switch (omap_rev) {
+ case OMAP5430_ES1_0:
+ case OMAP5430_ES2_0:
+ *regs = &ioregs_omap5430;
+ break;
+ case OMAP5432_ES1_0:
+ *regs = &ioregs_omap5432_es1;
+ break;
+ case OMAP5432_ES2_0:
+ case DRA752_ES1_0:
+ *regs = &ioregs_omap5432_es2;
+ break;
+
+ default:
+ printf("\n INVALID OMAP REVISION ");
+ }
+}
diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c
index d0c3ff7..2f4b247 100644
--- a/arch/arm/cpu/armv7/omap5/hwinit.c
+++ b/arch/arm/cpu/armv7/omap5/hwinit.c
@@ -32,6 +32,7 @@
#include <asm/armv7.h>
#include <asm/arch/cpu.h>
#include <asm/arch/sys_proto.h>
+#include <asm/arch/clocks.h>
#include <asm/sizes.h>
#include <asm/utils.h>
#include <asm/arch/gpio.h>
@@ -56,76 +57,58 @@ const struct gpio_bank *const omap_gpio_bank = gpio_bank_54xx;
/* LPDDR2 specific IO settings */
static void io_settings_lpddr2(void)
{
- struct omap_sys_ctrl_regs *ioregs_base =
- (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
-
- writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
- &(ioregs_base->control_ddrch1_0));
- writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
- &(ioregs_base->control_ddrch1_1));
- writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
- &(ioregs_base->control_ddrch2_0));
- writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
- &(ioregs_base->control_ddrch2_1));
- writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN,
- &(ioregs_base->control_lpddr2ch1_0));
- writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN,
- &(ioregs_base->control_lpddr2ch1_1));
- writel(DDR_IO_0_DDR2_DQ_INT_EN_ALL_DDR3_CA_DIS_ALL,
- &(ioregs_base->control_ddrio_0));
- writel(DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL,
- &(ioregs_base->control_ddrio_1));
- writel(DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL,
- &(ioregs_base->control_ddrio_2));
+ const struct ctrl_ioregs *ioregs;
+
+ get_ioregs(&ioregs);
+ writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_0);
+ writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_1);
+ writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_0);
+ writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_1);
+ writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_0);
+ writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_1);
+ writel(ioregs->ctrl_ddrio_0, (*ctrl)->control_ddrio_0);
+ writel(ioregs->ctrl_ddrio_1, (*ctrl)->control_ddrio_1);
+ writel(ioregs->ctrl_ddrio_2, (*ctrl)->control_ddrio_2);
}
/* DDR3 specific IO settings */
static void io_settings_ddr3(void)
{
u32 io_settings = 0;
- struct omap_sys_ctrl_regs *ioregs_base =
- (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
-
- writel(DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL,
- &(ioregs_base->control_ddr3ch1_0));
- writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
- &(ioregs_base->control_ddrch1_0));
- writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
- &(ioregs_base->control_ddrch1_1));
-
- writel(DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL,
- &(ioregs_base->control_ddr3ch2_0));
- writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
- &(ioregs_base->control_ddrch2_0));
- writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
- &(ioregs_base->control_ddrch2_1));
-
- writel(DDR_IO_0_VREF_CELLS_DDR3_VALUE,
- &(ioregs_base->control_ddrio_0));
- writel(DDR_IO_1_VREF_CELLS_DDR3_VALUE,
- &(ioregs_base->control_ddrio_1));
- writel(DDR_IO_2_VREF_CELLS_DDR3_VALUE,
- &(ioregs_base->control_ddrio_2));
+ const struct ctrl_ioregs *ioregs;
+
+ get_ioregs(&ioregs);
+ writel(ioregs->ctrl_ddr3ch, (*ctrl)->control_ddr3ch1_0);
+ writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_0);
+ writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_1);
+
+ writel(ioregs->ctrl_ddr3ch, (*ctrl)->control_ddr3ch2_0);
+ writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_0);
+ writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_1);
+
+ writel(ioregs->ctrl_ddrio_0, (*ctrl)->control_ddrio_0);
+ writel(ioregs->ctrl_ddrio_1, (*ctrl)->control_ddrio_1);
+ writel(ioregs->ctrl_ddrio_2, (*ctrl)->control_ddrio_2);
/* omap5432 does not use lpddr2 */
- writel(0x0, &(ioregs_base->control_lpddr2ch1_0));
- writel(0x0, &(ioregs_base->control_lpddr2ch1_1));
+ writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_0);
+ writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_1);
- writel(SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
- &(ioregs_base->control_emif1_sdram_config_ext));
- writel(SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
- &(ioregs_base->control_emif2_sdram_config_ext));
+ writel(ioregs->ctrl_emif_sdram_config_ext,
+ (*ctrl)->control_emif1_sdram_config_ext);
+ writel(ioregs->ctrl_emif_sdram_config_ext,
+ (*ctrl)->control_emif2_sdram_config_ext);
/* Disable DLL select */
- io_settings = (readl(&(ioregs_base->control_port_emif1_sdram_config))
+ io_settings = (readl((*ctrl)->control_port_emif1_sdram_config)
& 0xFFEFFFFF);
writel(io_settings,
- &(ioregs_base->control_port_emif1_sdram_config));
+ (*ctrl)->control_port_emif1_sdram_config);
- io_settings = (readl(&(ioregs_base->control_port_emif2_sdram_config))
+ io_settings = (readl((*ctrl)->control_port_emif2_sdram_config)
& 0xFFEFFFFF);
writel(io_settings,
- &(ioregs_base->control_port_emif2_sdram_config));
+ (*ctrl)->control_port_emif2_sdram_config);
}
/*
@@ -134,88 +117,198 @@ static void io_settings_ddr3(void)
void do_io_settings(void)
{
u32 io_settings = 0, mask = 0;
- struct omap_sys_ctrl_regs *ioregs_base =
- (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
/* Impedance settings EMMC, C2C 1,2, hsi2 */
mask = (ds_mask << 2) | (ds_mask << 8) |
(ds_mask << 16) | (ds_mask << 18);
- io_settings = readl(&(ioregs_base->control_smart1io_padconf_0)) &
+ io_settings = readl((*ctrl)->control_smart1io_padconf_0) &
(~mask);
io_settings |= (ds_60_ohm << 8) | (ds_45_ohm << 16) |
(ds_45_ohm << 18) | (ds_60_ohm << 2);
- writel(io_settings, &(ioregs_base->control_smart1io_padconf_0));
+ writel(io_settings, (*ctrl)->control_smart1io_padconf_0);
/* Impedance settings Mcspi2 */
mask = (ds_mask << 30);
- io_settings = readl(&(ioregs_base->control_smart1io_padconf_1)) &
+ io_settings = readl((*ctrl)->control_smart1io_padconf_1) &
(~mask);
io_settings |= (ds_60_ohm << 30);
- writel(io_settings, &(ioregs_base->control_smart1io_padconf_1));
+ writel(io_settings, (*ctrl)->control_smart1io_padconf_1);
/* Impedance settings C2C 3,4 */
mask = (ds_mask << 14) | (ds_mask << 16);
- io_settings = readl(&(ioregs_base->control_smart1io_padconf_2)) &
+ io_settings = readl((*ctrl)->control_smart1io_padconf_2) &
(~mask);
io_settings |= (ds_45_ohm << 14) | (ds_45_ohm << 16);
- writel(io_settings, &(ioregs_base->control_smart1io_padconf_2));
+ writel(io_settings, (*ctrl)->control_smart1io_padconf_2);
/* Slew rate settings EMMC, C2C 1,2 */
mask = (sc_mask << 8) | (sc_mask << 16) | (sc_mask << 18);
- io_settings = readl(&(ioregs_base->control_smart2io_padconf_0)) &
+ io_settings = readl((*ctrl)->control_smart2io_padconf_0) &
(~mask);
io_settings |= (sc_fast << 8) | (sc_na << 16) | (sc_na << 18);
- writel(io_settings, &(ioregs_base->control_smart2io_padconf_0));
+ writel(io_settings, (*ctrl)->control_smart2io_padconf_0);
/* Slew rate settings hsi2, Mcspi2 */
mask = (sc_mask << 24) | (sc_mask << 28);
- io_settings = readl(&(ioregs_base->control_smart2io_padconf_1)) &
+ io_settings = readl((*ctrl)->control_smart2io_padconf_1) &
(~mask);
io_settings |= (sc_fast << 28) | (sc_fast << 24);
- writel(io_settings, &(ioregs_base->control_smart2io_padconf_1));
+ writel(io_settings, (*ctrl)->control_smart2io_padconf_1);
/* Slew rate settings C2C 3,4 */
mask = (sc_mask << 16) | (sc_mask << 18);
- io_settings = readl(&(ioregs_base->control_smart2io_padconf_2)) &
+ io_settings = readl((*ctrl)->control_smart2io_padconf_2) &
(~mask);
io_settings |= (sc_na << 16) | (sc_na << 18);
- writel(io_settings, &(ioregs_base->control_smart2io_padconf_2));
+ writel(io_settings, (*ctrl)->control_smart2io_padconf_2);
/* impedance and slew rate settings for usb */
mask = (usb_i_mask << 29) | (usb_i_mask << 26) | (usb_i_mask << 23) |
(usb_i_mask << 20) | (usb_i_mask << 17) | (usb_i_mask << 14);
- io_settings = readl(&(ioregs_base->control_smart3io_padconf_1)) &
+ io_settings = readl((*ctrl)->control_smart3io_padconf_1) &
(~mask);
io_settings |= (ds_60_ohm << 29) | (ds_60_ohm << 26) |
(ds_60_ohm << 23) | (sc_fast << 20) |
(sc_fast << 17) | (sc_fast << 14);
- writel(io_settings, &(ioregs_base->control_smart3io_padconf_1));
+ writel(io_settings, (*ctrl)->control_smart3io_padconf_1);
- if (omap_revision() <= OMAP5430_ES1_0)
+ if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2)
io_settings_lpddr2();
else
io_settings_ddr3();
/* Efuse settings */
- writel(EFUSE_1, &(ioregs_base->control_efuse_1));
- writel(EFUSE_2, &(ioregs_base->control_efuse_2));
- writel(EFUSE_3, &(ioregs_base->control_efuse_3));
- writel(EFUSE_4, &(ioregs_base->control_efuse_4));
+ writel(EFUSE_1, (*ctrl)->control_efuse_1);
+ writel(EFUSE_2, (*ctrl)->control_efuse_2);
+ writel(EFUSE_3, (*ctrl)->control_efuse_3);
+ writel(EFUSE_4, (*ctrl)->control_efuse_4);
+}
+
+static const struct srcomp_params srcomp_parameters[NUM_SYS_CLKS] = {
+ {0x45, 0x1}, /* 12 MHz */
+ {-1, -1}, /* 13 MHz */
+ {0x63, 0x2}, /* 16.8 MHz */
+ {0x57, 0x2}, /* 19.2 MHz */
+ {0x20, 0x1}, /* 26 MHz */
+ {-1, -1}, /* 27 MHz */
+ {0x41, 0x3} /* 38.4 MHz */
+};
+
+void srcomp_enable(void)
+{
+ u32 srcomp_value, mul_factor, div_factor, clk_val, i;
+ u32 sysclk_ind = get_sys_clk_index();
+ u32 omap_rev = omap_revision();
+
+ mul_factor = srcomp_parameters[sysclk_ind].multiply_factor;
+ div_factor = srcomp_parameters[sysclk_ind].divide_factor;
+
+ for (i = 0; i < 4; i++) {
+ srcomp_value = readl((*ctrl)->control_srcomp_north_side + i*4);
+ srcomp_value &=
+ ~(MULTIPLY_FACTOR_XS_MASK | DIVIDE_FACTOR_XS_MASK);
+ srcomp_value |= (mul_factor << MULTIPLY_FACTOR_XS_SHIFT) |
+ (div_factor << DIVIDE_FACTOR_XS_SHIFT);
+ writel(srcomp_value, (*ctrl)->control_srcomp_north_side + i*4);
+ }
+
+ if ((omap_rev == OMAP5430_ES1_0) || (omap_rev == OMAP5432_ES1_0)) {
+ clk_val = readl((*prcm)->cm_coreaon_io_srcomp_clkctrl);
+ clk_val |= OPTFCLKEN_SRCOMP_FCLK_MASK;
+ writel(clk_val, (*prcm)->cm_coreaon_io_srcomp_clkctrl);
+
+ for (i = 0; i < 4; i++) {
+ srcomp_value =
+ readl((*ctrl)->control_srcomp_north_side + i*4);
+ srcomp_value &= ~PWRDWN_XS_MASK;
+ writel(srcomp_value,
+ (*ctrl)->control_srcomp_north_side + i*4);
+
+ while (((readl((*ctrl)->control_srcomp_north_side + i*4)
+ & SRCODE_READ_XS_MASK) >>
+ SRCODE_READ_XS_SHIFT) == 0)
+ ;
+
+ srcomp_value =
+ readl((*ctrl)->control_srcomp_north_side + i*4);
+ srcomp_value &= ~OVERRIDE_XS_MASK;
+ writel(srcomp_value,
+ (*ctrl)->control_srcomp_north_side + i*4);
+ }
+ } else {
+ srcomp_value = readl((*ctrl)->control_srcomp_east_side_wkup);
+ srcomp_value &= ~(MULTIPLY_FACTOR_XS_MASK |
+ DIVIDE_FACTOR_XS_MASK);
+ srcomp_value |= (mul_factor << MULTIPLY_FACTOR_XS_SHIFT) |
+ (div_factor << DIVIDE_FACTOR_XS_SHIFT);
+ writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup);
+
+ for (i = 0; i < 4; i++) {
+ srcomp_value =
+ readl((*ctrl)->control_srcomp_north_side + i*4);
+ srcomp_value |= SRCODE_OVERRIDE_SEL_XS_MASK;
+ writel(srcomp_value,
+ (*ctrl)->control_srcomp_north_side + i*4);
+
+ srcomp_value =
+ readl((*ctrl)->control_srcomp_north_side + i*4);
+ srcomp_value &= ~OVERRIDE_XS_MASK;
+ writel(srcomp_value,
+ (*ctrl)->control_srcomp_north_side + i*4);
+ }
+
+ srcomp_value =
+ readl((*ctrl)->control_srcomp_east_side_wkup);
+ srcomp_value |= SRCODE_OVERRIDE_SEL_XS_MASK;
+ writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup);
+
+ srcomp_value =
+ readl((*ctrl)->control_srcomp_east_side_wkup);
+ srcomp_value &= ~OVERRIDE_XS_MASK;
+ writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup);
+
+ clk_val = readl((*prcm)->cm_coreaon_io_srcomp_clkctrl);
+ clk_val |= OPTFCLKEN_SRCOMP_FCLK_MASK;
+ writel(clk_val, (*prcm)->cm_coreaon_io_srcomp_clkctrl);
+
+ clk_val = readl((*prcm)->cm_wkupaon_io_srcomp_clkctrl);
+ clk_val |= OPTFCLKEN_SRCOMP_FCLK_MASK;
+ writel(clk_val, (*prcm)->cm_wkupaon_io_srcomp_clkctrl);
+
+ for (i = 0; i < 4; i++) {
+ while (((readl((*ctrl)->control_srcomp_north_side + i*4)
+ & SRCODE_READ_XS_MASK) >>
+ SRCODE_READ_XS_SHIFT) == 0)
+ ;
+
+ srcomp_value =
+ readl((*ctrl)->control_srcomp_north_side + i*4);
+ srcomp_value &= ~SRCODE_OVERRIDE_SEL_XS_MASK;
+ writel(srcomp_value,
+ (*ctrl)->control_srcomp_north_side + i*4);
+ }
+
+ while (((readl((*ctrl)->control_srcomp_east_side_wkup) &
+ SRCODE_READ_XS_MASK) >> SRCODE_READ_XS_SHIFT) == 0)
+ ;
+
+ srcomp_value =
+ readl((*ctrl)->control_srcomp_east_side_wkup);
+ srcomp_value &= ~SRCODE_OVERRIDE_SEL_XS_MASK;
+ writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup);
+ }
}
#endif
void config_data_eye_leveling_samples(u32 emif_base)
{
- struct omap_sys_ctrl_regs *ioregs_base =
- (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
-
/*EMIF_SDRAM_CONFIG_EXT-Read data eye leveling no of samples =4*/
if (emif_base == EMIF1_BASE)
writel(SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
- &(ioregs_base->control_emif1_sdram_config_ext));
+ (*ctrl)->control_emif1_sdram_config_ext);
else if (emif_base == EMIF2_BASE)
writel(SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
- &(ioregs_base->control_emif2_sdram_config_ext));
+ (*ctrl)->control_emif2_sdram_config_ext);
}
void init_omap_revision(void)
@@ -227,17 +320,25 @@ void init_omap_revision(void)
*/
unsigned int rev = cortex_rev();
- switch (rev) {
- case MIDR_CORTEX_A15_R0P0:
- switch (readl(CONTROL_ID_CODE)) {
- case OMAP5430_CONTROL_ID_CODE_ES1_0:
- *omap_si_rev = OMAP5430_ES1_0;
- break;
- case OMAP5432_CONTROL_ID_CODE_ES1_0:
- default:
- *omap_si_rev = OMAP5432_ES1_0;
- break;
- }
+ switch (readl(CONTROL_ID_CODE)) {
+ case OMAP5430_CONTROL_ID_CODE_ES1_0:
+ *omap_si_rev = OMAP5430_ES1_0;
+ if (rev == MIDR_CORTEX_A15_R2P2)
+ *omap_si_rev = OMAP5430_ES2_0;
+ break;
+ case OMAP5432_CONTROL_ID_CODE_ES1_0:
+ *omap_si_rev = OMAP5432_ES1_0;
+ if (rev == MIDR_CORTEX_A15_R2P2)
+ *omap_si_rev = OMAP5432_ES2_0;
+ break;
+ case OMAP5430_CONTROL_ID_CODE_ES2_0:
+ *omap_si_rev = OMAP5430_ES2_0;
+ break;
+ case OMAP5432_CONTROL_ID_CODE_ES2_0:
+ *omap_si_rev = OMAP5432_ES2_0;
+ break;
+ case DRA752_CONTROL_ID_CODE_ES1_0:
+ *omap_si_rev = DRA752_ES1_0;
break;
default:
*omap_si_rev = OMAP5430_SILICON_ID_INVALID;
@@ -253,7 +354,12 @@ void reset_cpu(ulong ignored)
* So use cold reset in case instead.
*/
if (omap_rev == OMAP5430_ES1_0)
- writel(PRM_RSTCTRL_RESET << 0x1, PRM_RSTCTRL);
+ writel(PRM_RSTCTRL_RESET << 0x1, (*prcm)->prm_rstctrl);
else
- writel(PRM_RSTCTRL_RESET, PRM_RSTCTRL);
+ writel(PRM_RSTCTRL_RESET, (*prcm)->prm_rstctrl);
+}
+
+u32 warm_reset(void)
+{
+ return readl((*prcm)->prm_rstst) & PRM_RSTST_WARM_RESET_MASK;
}
diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c
new file mode 100644
index 0000000..b8a61fe
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c
@@ -0,0 +1,958 @@
+/*
+ *
+ * HW regs data for OMAP5 Soc
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * Sricharan R <r.sricharan@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/omap_common.h>
+
+struct prcm_regs const omap5_es1_prcm = {
+ /* cm1.ckgen */
+ .cm_clksel_core = 0x4a004100,
+ .cm_clksel_abe = 0x4a004108,
+ .cm_dll_ctrl = 0x4a004110,
+ .cm_clkmode_dpll_core = 0x4a004120,
+ .cm_idlest_dpll_core = 0x4a004124,
+ .cm_autoidle_dpll_core = 0x4a004128,
+ .cm_clksel_dpll_core = 0x4a00412c,
+ .cm_div_m2_dpll_core = 0x4a004130,
+ .cm_div_m3_dpll_core = 0x4a004134,
+ .cm_div_h11_dpll_core = 0x4a004138,
+ .cm_div_h12_dpll_core = 0x4a00413c,
+ .cm_div_h13_dpll_core = 0x4a004140,
+ .cm_div_h14_dpll_core = 0x4a004144,
+ .cm_ssc_deltamstep_dpll_core = 0x4a004148,
+ .cm_ssc_modfreqdiv_dpll_core = 0x4a00414c,
+ .cm_emu_override_dpll_core = 0x4a004150,
+ .cm_div_h22_dpllcore = 0x4a004154,
+ .cm_div_h23_dpll_core = 0x4a004158,
+ .cm_clkmode_dpll_mpu = 0x4a004160,
+ .cm_idlest_dpll_mpu = 0x4a004164,
+ .cm_autoidle_dpll_mpu = 0x4a004168,
+ .cm_clksel_dpll_mpu = 0x4a00416c,
+ .cm_div_m2_dpll_mpu = 0x4a004170,
+ .cm_ssc_deltamstep_dpll_mpu = 0x4a004188,
+ .cm_ssc_modfreqdiv_dpll_mpu = 0x4a00418c,
+ .cm_bypclk_dpll_mpu = 0x4a00419c,
+ .cm_clkmode_dpll_iva = 0x4a0041a0,
+ .cm_idlest_dpll_iva = 0x4a0041a4,
+ .cm_autoidle_dpll_iva = 0x4a0041a8,
+ .cm_clksel_dpll_iva = 0x4a0041ac,
+ .cm_div_h11_dpll_iva = 0x4a0041b8,
+ .cm_div_h12_dpll_iva = 0x4a0041bc,
+ .cm_ssc_deltamstep_dpll_iva = 0x4a0041c8,
+ .cm_ssc_modfreqdiv_dpll_iva = 0x4a0041cc,
+ .cm_bypclk_dpll_iva = 0x4a0041dc,
+ .cm_clkmode_dpll_abe = 0x4a0041e0,
+ .cm_idlest_dpll_abe = 0x4a0041e4,
+ .cm_autoidle_dpll_abe = 0x4a0041e8,
+ .cm_clksel_dpll_abe = 0x4a0041ec,
+ .cm_div_m2_dpll_abe = 0x4a0041f0,
+ .cm_div_m3_dpll_abe = 0x4a0041f4,
+ .cm_ssc_deltamstep_dpll_abe = 0x4a004208,
+ .cm_ssc_modfreqdiv_dpll_abe = 0x4a00420c,
+ .cm_clkmode_dpll_ddrphy = 0x4a004220,
+ .cm_idlest_dpll_ddrphy = 0x4a004224,
+ .cm_autoidle_dpll_ddrphy = 0x4a004228,
+ .cm_clksel_dpll_ddrphy = 0x4a00422c,
+ .cm_div_m2_dpll_ddrphy = 0x4a004230,
+ .cm_div_h11_dpll_ddrphy = 0x4a004238,
+ .cm_div_h12_dpll_ddrphy = 0x4a00423c,
+ .cm_div_h13_dpll_ddrphy = 0x4a004240,
+ .cm_ssc_deltamstep_dpll_ddrphy = 0x4a004248,
+ .cm_shadow_freq_config1 = 0x4a004260,
+ .cm_mpu_mpu_clkctrl = 0x4a004320,
+
+ /* cm1.dsp */
+ .cm_dsp_clkstctrl = 0x4a004400,
+ .cm_dsp_dsp_clkctrl = 0x4a004420,
+
+ /* cm1.abe */
+ .cm1_abe_clkstctrl = 0x4a004500,
+ .cm1_abe_l4abe_clkctrl = 0x4a004520,
+ .cm1_abe_aess_clkctrl = 0x4a004528,
+ .cm1_abe_pdm_clkctrl = 0x4a004530,
+ .cm1_abe_dmic_clkctrl = 0x4a004538,
+ .cm1_abe_mcasp_clkctrl = 0x4a004540,
+ .cm1_abe_mcbsp1_clkctrl = 0x4a004548,
+ .cm1_abe_mcbsp2_clkctrl = 0x4a004550,
+ .cm1_abe_mcbsp3_clkctrl = 0x4a004558,
+ .cm1_abe_slimbus_clkctrl = 0x4a004560,
+ .cm1_abe_timer5_clkctrl = 0x4a004568,
+ .cm1_abe_timer6_clkctrl = 0x4a004570,
+ .cm1_abe_timer7_clkctrl = 0x4a004578,
+ .cm1_abe_timer8_clkctrl = 0x4a004580,
+ .cm1_abe_wdt3_clkctrl = 0x4a004588,
+
+ /* cm2.ckgen */
+ .cm_clksel_mpu_m3_iss_root = 0x4a008100,
+ .cm_clksel_usb_60mhz = 0x4a008104,
+ .cm_scale_fclk = 0x4a008108,
+ .cm_core_dvfs_perf1 = 0x4a008110,
+ .cm_core_dvfs_perf2 = 0x4a008114,
+ .cm_core_dvfs_perf3 = 0x4a008118,
+ .cm_core_dvfs_perf4 = 0x4a00811c,
+ .cm_core_dvfs_current = 0x4a008124,
+ .cm_iva_dvfs_perf_tesla = 0x4a008128,
+ .cm_iva_dvfs_perf_ivahd = 0x4a00812c,
+ .cm_iva_dvfs_perf_abe = 0x4a008130,
+ .cm_iva_dvfs_current = 0x4a008138,
+ .cm_clkmode_dpll_per = 0x4a008140,
+ .cm_idlest_dpll_per = 0x4a008144,
+ .cm_autoidle_dpll_per = 0x4a008148,
+ .cm_clksel_dpll_per = 0x4a00814c,
+ .cm_div_m2_dpll_per = 0x4a008150,
+ .cm_div_m3_dpll_per = 0x4a008154,
+ .cm_div_h11_dpll_per = 0x4a008158,
+ .cm_div_h12_dpll_per = 0x4a00815c,
+ .cm_div_h14_dpll_per = 0x4a008164,
+ .cm_ssc_deltamstep_dpll_per = 0x4a008168,
+ .cm_ssc_modfreqdiv_dpll_per = 0x4a00816c,
+ .cm_emu_override_dpll_per = 0x4a008170,
+ .cm_clkmode_dpll_usb = 0x4a008180,
+ .cm_idlest_dpll_usb = 0x4a008184,
+ .cm_autoidle_dpll_usb = 0x4a008188,
+ .cm_clksel_dpll_usb = 0x4a00818c,
+ .cm_div_m2_dpll_usb = 0x4a008190,
+ .cm_ssc_deltamstep_dpll_usb = 0x4a0081a8,
+ .cm_ssc_modfreqdiv_dpll_usb = 0x4a0081ac,
+ .cm_clkdcoldo_dpll_usb = 0x4a0081b4,
+ .cm_clkmode_dpll_unipro = 0x4a0081c0,
+ .cm_idlest_dpll_unipro = 0x4a0081c4,
+ .cm_autoidle_dpll_unipro = 0x4a0081c8,
+ .cm_clksel_dpll_unipro = 0x4a0081cc,
+ .cm_div_m2_dpll_unipro = 0x4a0081d0,
+ .cm_ssc_deltamstep_dpll_unipro = 0x4a0081e8,
+ .cm_ssc_modfreqdiv_dpll_unipro = 0x4a0081ec,
+
+ /* cm2.core */
+ .cm_coreaon_bandgap_clkctrl = 0x4a008648,
+ .cm_coreaon_io_srcomp_clkctrl = 0x4a008650,
+ .cm_l3_1_clkstctrl = 0x4a008700,
+ .cm_l3_1_dynamicdep = 0x4a008708,
+ .cm_l3_1_l3_1_clkctrl = 0x4a008720,
+ .cm_l3_2_clkstctrl = 0x4a008800,
+ .cm_l3_2_dynamicdep = 0x4a008808,
+ .cm_l3_2_l3_2_clkctrl = 0x4a008820,
+ .cm_l3_gpmc_clkctrl = 0x4a008828,
+ .cm_l3_2_ocmc_ram_clkctrl = 0x4a008830,
+ .cm_mpu_m3_clkstctrl = 0x4a008900,
+ .cm_mpu_m3_staticdep = 0x4a008904,
+ .cm_mpu_m3_dynamicdep = 0x4a008908,
+ .cm_mpu_m3_mpu_m3_clkctrl = 0x4a008920,
+ .cm_sdma_clkstctrl = 0x4a008a00,
+ .cm_sdma_staticdep = 0x4a008a04,
+ .cm_sdma_dynamicdep = 0x4a008a08,
+ .cm_sdma_sdma_clkctrl = 0x4a008a20,
+ .cm_memif_clkstctrl = 0x4a008b00,
+ .cm_memif_dmm_clkctrl = 0x4a008b20,
+ .cm_memif_emif_fw_clkctrl = 0x4a008b28,
+ .cm_memif_emif_1_clkctrl = 0x4a008b30,
+ .cm_memif_emif_2_clkctrl = 0x4a008b38,
+ .cm_memif_dll_clkctrl = 0x4a008b40,
+ .cm_memif_emif_h1_clkctrl = 0x4a008b50,
+ .cm_memif_emif_h2_clkctrl = 0x4a008b58,
+ .cm_memif_dll_h_clkctrl = 0x4a008b60,
+ .cm_c2c_clkstctrl = 0x4a008c00,
+ .cm_c2c_staticdep = 0x4a008c04,
+ .cm_c2c_dynamicdep = 0x4a008c08,
+ .cm_c2c_sad2d_clkctrl = 0x4a008c20,
+ .cm_c2c_modem_icr_clkctrl = 0x4a008c28,
+ .cm_c2c_sad2d_fw_clkctrl = 0x4a008c30,
+ .cm_l4cfg_clkstctrl = 0x4a008d00,
+ .cm_l4cfg_dynamicdep = 0x4a008d08,
+ .cm_l4cfg_l4_cfg_clkctrl = 0x4a008d20,
+ .cm_l4cfg_hw_sem_clkctrl = 0x4a008d28,
+ .cm_l4cfg_mailbox_clkctrl = 0x4a008d30,
+ .cm_l4cfg_sar_rom_clkctrl = 0x4a008d38,
+ .cm_l3instr_clkstctrl = 0x4a008e00,
+ .cm_l3instr_l3_3_clkctrl = 0x4a008e20,
+ .cm_l3instr_l3_instr_clkctrl = 0x4a008e28,
+ .cm_l3instr_intrconn_wp1_clkctrl = 0x4a008e40,
+
+ /* cm2.ivahd */
+ .cm_ivahd_clkstctrl = 0x4a008f00,
+ .cm_ivahd_ivahd_clkctrl = 0x4a008f20,
+ .cm_ivahd_sl2_clkctrl = 0x4a008f28,
+
+ /* cm2.cam */
+ .cm_cam_clkstctrl = 0x4a009000,
+ .cm_cam_iss_clkctrl = 0x4a009020,
+ .cm_cam_fdif_clkctrl = 0x4a009028,
+
+ /* cm2.dss */
+ .cm_dss_clkstctrl = 0x4a009100,
+ .cm_dss_dss_clkctrl = 0x4a009120,
+
+ /* cm2.sgx */
+ .cm_sgx_clkstctrl = 0x4a009200,
+ .cm_sgx_sgx_clkctrl = 0x4a009220,
+
+ /* cm2.l3init */
+ .cm_l3init_clkstctrl = 0x4a009300,
+ .cm_l3init_hsmmc1_clkctrl = 0x4a009328,
+ .cm_l3init_hsmmc2_clkctrl = 0x4a009330,
+ .cm_l3init_hsi_clkctrl = 0x4a009338,
+ .cm_l3init_hsusbhost_clkctrl = 0x4a009358,
+ .cm_l3init_hsusbotg_clkctrl = 0x4a009360,
+ .cm_l3init_hsusbtll_clkctrl = 0x4a009368,
+ .cm_l3init_p1500_clkctrl = 0x4a009378,
+ .cm_l3init_fsusb_clkctrl = 0x4a0093d0,
+ .cm_l3init_ocp2scp1_clkctrl = 0x4a0093e0,
+
+ /* cm2.l4per */
+ .cm_l4per_clkstctrl = 0x4a009400,
+ .cm_l4per_dynamicdep = 0x4a009408,
+ .cm_l4per_adc_clkctrl = 0x4a009420,
+ .cm_l4per_gptimer10_clkctrl = 0x4a009428,
+ .cm_l4per_gptimer11_clkctrl = 0x4a009430,
+ .cm_l4per_gptimer2_clkctrl = 0x4a009438,
+ .cm_l4per_gptimer3_clkctrl = 0x4a009440,
+ .cm_l4per_gptimer4_clkctrl = 0x4a009448,
+ .cm_l4per_gptimer9_clkctrl = 0x4a009450,
+ .cm_l4per_elm_clkctrl = 0x4a009458,
+ .cm_l4per_gpio2_clkctrl = 0x4a009460,
+ .cm_l4per_gpio3_clkctrl = 0x4a009468,
+ .cm_l4per_gpio4_clkctrl = 0x4a009470,
+ .cm_l4per_gpio5_clkctrl = 0x4a009478,
+ .cm_l4per_gpio6_clkctrl = 0x4a009480,
+ .cm_l4per_hdq1w_clkctrl = 0x4a009488,
+ .cm_l4per_hecc1_clkctrl = 0x4a009490,
+ .cm_l4per_hecc2_clkctrl = 0x4a009498,
+ .cm_l4per_i2c1_clkctrl = 0x4a0094a0,
+ .cm_l4per_i2c2_clkctrl = 0x4a0094a8,
+ .cm_l4per_i2c3_clkctrl = 0x4a0094b0,
+ .cm_l4per_i2c4_clkctrl = 0x4a0094b8,
+ .cm_l4per_l4per_clkctrl = 0x4a0094c0,
+ .cm_l4per_mcasp2_clkctrl = 0x4a0094d0,
+ .cm_l4per_mcasp3_clkctrl = 0x4a0094d8,
+ .cm_l4per_mgate_clkctrl = 0x4a0094e8,
+ .cm_l4per_mcspi1_clkctrl = 0x4a0094f0,
+ .cm_l4per_mcspi2_clkctrl = 0x4a0094f8,
+ .cm_l4per_mcspi3_clkctrl = 0x4a009500,
+ .cm_l4per_mcspi4_clkctrl = 0x4a009508,
+ .cm_l4per_gpio7_clkctrl = 0x4a009510,
+ .cm_l4per_gpio8_clkctrl = 0x4a009518,
+ .cm_l4per_mmcsd3_clkctrl = 0x4a009520,
+ .cm_l4per_mmcsd4_clkctrl = 0x4a009528,
+ .cm_l4per_msprohg_clkctrl = 0x4a009530,
+ .cm_l4per_slimbus2_clkctrl = 0x4a009538,
+ .cm_l4per_uart1_clkctrl = 0x4a009540,
+ .cm_l4per_uart2_clkctrl = 0x4a009548,
+ .cm_l4per_uart3_clkctrl = 0x4a009550,
+ .cm_l4per_uart4_clkctrl = 0x4a009558,
+ .cm_l4per_mmcsd5_clkctrl = 0x4a009560,
+ .cm_l4per_i2c5_clkctrl = 0x4a009568,
+ .cm_l4per_uart5_clkctrl = 0x4a009570,
+ .cm_l4per_uart6_clkctrl = 0x4a009578,
+ .cm_l4sec_clkstctrl = 0x4a009580,
+ .cm_l4sec_staticdep = 0x4a009584,
+ .cm_l4sec_dynamicdep = 0x4a009588,
+ .cm_l4sec_aes1_clkctrl = 0x4a0095a0,
+ .cm_l4sec_aes2_clkctrl = 0x4a0095a8,
+ .cm_l4sec_des3des_clkctrl = 0x4a0095b0,
+ .cm_l4sec_pkaeip29_clkctrl = 0x4a0095b8,
+ .cm_l4sec_rng_clkctrl = 0x4a0095c0,
+ .cm_l4sec_sha2md51_clkctrl = 0x4a0095c8,
+ .cm_l4sec_cryptodma_clkctrl = 0x4a0095d8,
+
+ /* l4 wkup regs */
+ .cm_abe_pll_ref_clksel = 0x4ae0610c,
+ .cm_sys_clksel = 0x4ae06110,
+ .cm_wkup_clkstctrl = 0x4ae07800,
+ .cm_wkup_l4wkup_clkctrl = 0x4ae07820,
+ .cm_wkup_wdtimer1_clkctrl = 0x4ae07828,
+ .cm_wkup_wdtimer2_clkctrl = 0x4ae07830,
+ .cm_wkup_gpio1_clkctrl = 0x4ae07838,
+ .cm_wkup_gptimer1_clkctrl = 0x4ae07840,
+ .cm_wkup_gptimer12_clkctrl = 0x4ae07848,
+ .cm_wkup_synctimer_clkctrl = 0x4ae07850,
+ .cm_wkup_usim_clkctrl = 0x4ae07858,
+ .cm_wkup_sarram_clkctrl = 0x4ae07860,
+ .cm_wkup_keyboard_clkctrl = 0x4ae07878,
+ .cm_wkup_rtc_clkctrl = 0x4ae07880,
+ .cm_wkup_bandgap_clkctrl = 0x4ae07888,
+ .cm_wkupaon_scrm_clkctrl = 0x4ae07890,
+ .cm_wkupaon_io_srcomp_clkctrl = 0x4ae07898,
+ .prm_rstctrl = 0x4ae07b00,
+ .prm_rstst = 0x4ae07b04,
+ .prm_vc_val_bypass = 0x4ae07ba0,
+ .prm_vc_cfg_i2c_mode = 0x4ae07bb4,
+ .prm_vc_cfg_i2c_clk = 0x4ae07bb8,
+ .prm_sldo_core_setup = 0x4ae07bc4,
+ .prm_sldo_core_ctrl = 0x4ae07bc8,
+ .prm_sldo_mpu_setup = 0x4ae07bcc,
+ .prm_sldo_mpu_ctrl = 0x4ae07bd0,
+ .prm_sldo_mm_setup = 0x4ae07bd4,
+ .prm_sldo_mm_ctrl = 0x4ae07bd8,
+};
+
+struct omap_sys_ctrl_regs const omap5_ctrl = {
+ .control_status = 0x4A002134,
+ .control_paconf_global = 0x4A002DA0,
+ .control_paconf_mode = 0x4A002DA4,
+ .control_smart1io_padconf_0 = 0x4A002DA8,
+ .control_smart1io_padconf_1 = 0x4A002DAC,
+ .control_smart1io_padconf_2 = 0x4A002DB0,
+ .control_smart2io_padconf_0 = 0x4A002DB4,
+ .control_smart2io_padconf_1 = 0x4A002DB8,
+ .control_smart2io_padconf_2 = 0x4A002DBC,
+ .control_smart3io_padconf_0 = 0x4A002DC0,
+ .control_smart3io_padconf_1 = 0x4A002DC4,
+ .control_pbias = 0x4A002E00,
+ .control_i2c_0 = 0x4A002E04,
+ .control_camera_rx = 0x4A002E08,
+ .control_hdmi_tx_phy = 0x4A002E0C,
+ .control_uniportm = 0x4A002E10,
+ .control_dsiphy = 0x4A002E14,
+ .control_mcbsplp = 0x4A002E18,
+ .control_usb2phycore = 0x4A002E1C,
+ .control_hdmi_1 = 0x4A002E20,
+ .control_hsi = 0x4A002E24,
+ .control_ddr3ch1_0 = 0x4A002E30,
+ .control_ddr3ch2_0 = 0x4A002E34,
+ .control_ddrch1_0 = 0x4A002E38,
+ .control_ddrch1_1 = 0x4A002E3C,
+ .control_ddrch2_0 = 0x4A002E40,
+ .control_ddrch2_1 = 0x4A002E44,
+ .control_lpddr2ch1_0 = 0x4A002E48,
+ .control_lpddr2ch1_1 = 0x4A002E4C,
+ .control_ddrio_0 = 0x4A002E50,
+ .control_ddrio_1 = 0x4A002E54,
+ .control_ddrio_2 = 0x4A002E58,
+ .control_hyst_1 = 0x4A002E5C,
+ .control_usbb_hsic_control = 0x4A002E60,
+ .control_c2c = 0x4A002E64,
+ .control_core_control_spare_rw = 0x4A002E68,
+ .control_core_control_spare_r = 0x4A002E6C,
+ .control_core_control_spare_r_c0 = 0x4A002E70,
+ .control_srcomp_north_side = 0x4A002E74,
+ .control_srcomp_south_side = 0x4A002E78,
+ .control_srcomp_east_side = 0x4A002E7C,
+ .control_srcomp_west_side = 0x4A002E80,
+ .control_srcomp_code_latch = 0x4A002E84,
+ .control_port_emif1_sdram_config = 0x4AE0C110,
+ .control_port_emif1_lpddr2_nvm_config = 0x4AE0C114,
+ .control_port_emif2_sdram_config = 0x4AE0C118,
+ .control_emif1_sdram_config_ext = 0x4AE0C144,
+ .control_emif2_sdram_config_ext = 0x4AE0C148,
+ .control_smart1nopmio_padconf_0 = 0x4AE0CDA0,
+ .control_smart1nopmio_padconf_1 = 0x4AE0CDA4,
+ .control_padconf_mode = 0x4AE0CDA8,
+ .control_xtal_oscillator = 0x4AE0CDAC,
+ .control_i2c_2 = 0x4AE0CDB0,
+ .control_ckobuffer = 0x4AE0CDB4,
+ .control_wkup_control_spare_rw = 0x4AE0CDB8,
+ .control_wkup_control_spare_r = 0x4AE0CDBC,
+ .control_wkup_control_spare_r_c0 = 0x4AE0CDC0,
+ .control_srcomp_east_side_wkup = 0x4AE0CDC4,
+ .control_efuse_1 = 0x4AE0CDC8,
+ .control_efuse_2 = 0x4AE0CDCC,
+ .control_efuse_3 = 0x4AE0CDD0,
+ .control_efuse_4 = 0x4AE0CDD4,
+ .control_efuse_5 = 0x4AE0CDD8,
+ .control_efuse_6 = 0x4AE0CDDC,
+ .control_efuse_7 = 0x4AE0CDE0,
+ .control_efuse_8 = 0x4AE0CDE4,
+ .control_efuse_9 = 0x4AE0CDE8,
+ .control_efuse_10 = 0x4AE0CDEC,
+ .control_efuse_11 = 0x4AE0CDF0,
+ .control_efuse_12 = 0x4AE0CDF4,
+ .control_efuse_13 = 0x4AE0CDF8,
+};
+
+struct omap_sys_ctrl_regs const dra7xx_ctrl = {
+ .control_status = 0x4A002134,
+ .control_core_mmr_lock1 = 0x4A002540,
+ .control_core_mmr_lock2 = 0x4A002544,
+ .control_core_mmr_lock3 = 0x4A002548,
+ .control_core_mmr_lock4 = 0x4A00254C,
+ .control_core_mmr_lock5 = 0x4A002550,
+ .control_core_control_io1 = 0x4A002554,
+ .control_core_control_io2 = 0x4A002558,
+ .control_paconf_global = 0x4A002DA0,
+ .control_paconf_mode = 0x4A002DA4,
+ .control_smart1io_padconf_0 = 0x4A002DA8,
+ .control_smart1io_padconf_1 = 0x4A002DAC,
+ .control_smart1io_padconf_2 = 0x4A002DB0,
+ .control_smart2io_padconf_0 = 0x4A002DB4,
+ .control_smart2io_padconf_1 = 0x4A002DB8,
+ .control_smart2io_padconf_2 = 0x4A002DBC,
+ .control_smart3io_padconf_0 = 0x4A002DC0,
+ .control_smart3io_padconf_1 = 0x4A002DC4,
+ .control_pbias = 0x4A002E00,
+ .control_i2c_0 = 0x4A002E04,
+ .control_camera_rx = 0x4A002E08,
+ .control_hdmi_tx_phy = 0x4A002E0C,
+ .control_uniportm = 0x4A002E10,
+ .control_dsiphy = 0x4A002E14,
+ .control_mcbsplp = 0x4A002E18,
+ .control_usb2phycore = 0x4A002E1C,
+ .control_hdmi_1 = 0x4A002E20,
+ .control_hsi = 0x4A002E24,
+ .control_ddr3ch1_0 = 0x4A002E30,
+ .control_ddr3ch2_0 = 0x4A002E34,
+ .control_ddrch1_0 = 0x4A002E38,
+ .control_ddrch1_1 = 0x4A002E3C,
+ .control_ddrch2_0 = 0x4A002E40,
+ .control_ddrch2_1 = 0x4A002E44,
+ .control_lpddr2ch1_0 = 0x4A002E48,
+ .control_lpddr2ch1_1 = 0x4A002E4C,
+ .control_ddrio_0 = 0x4A002E50,
+ .control_ddrio_1 = 0x4A002E54,
+ .control_ddrio_2 = 0x4A002E58,
+ .control_hyst_1 = 0x4A002E5C,
+ .control_usbb_hsic_control = 0x4A002E60,
+ .control_c2c = 0x4A002E64,
+ .control_core_control_spare_rw = 0x4A002E68,
+ .control_core_control_spare_r = 0x4A002E6C,
+ .control_core_control_spare_r_c0 = 0x4A002E70,
+ .control_srcomp_north_side = 0x4A002E74,
+ .control_srcomp_south_side = 0x4A002E78,
+ .control_srcomp_east_side = 0x4A002E7C,
+ .control_srcomp_west_side = 0x4A002E80,
+ .control_srcomp_code_latch = 0x4A002E84,
+ .control_padconf_core_base = 0x4A003400,
+ .control_port_emif1_sdram_config = 0x4AE0C110,
+ .control_port_emif1_lpddr2_nvm_config = 0x4AE0C114,
+ .control_port_emif2_sdram_config = 0x4AE0C118,
+ .control_emif1_sdram_config_ext = 0x4AE0C144,
+ .control_emif2_sdram_config_ext = 0x4AE0C148,
+ .control_padconf_mode = 0x4AE0C5A0,
+ .control_xtal_oscillator = 0x4AE0C5A4,
+ .control_i2c_2 = 0x4AE0C5A8,
+ .control_ckobuffer = 0x4AE0C5AC,
+ .control_wkup_control_spare_rw = 0x4AE0C5B0,
+ .control_wkup_control_spare_r = 0x4AE0C5B4,
+ .control_wkup_control_spare_r_c0 = 0x4AE0C5B8,
+ .control_srcomp_east_side_wkup = 0x4AE0C5BC,
+ .control_efuse_1 = 0x4AE0C5C0,
+ .control_efuse_2 = 0x4AE0C5C4,
+ .control_efuse_3 = 0x4AE0C5C8,
+ .control_efuse_4 = 0x4AE0C5CC,
+ .control_efuse_13 = 0x4AE0C5F0,
+};
+
+struct prcm_regs const omap5_es2_prcm = {
+ /* cm1.ckgen */
+ .cm_clksel_core = 0x4a004100,
+ .cm_clksel_abe = 0x4a004108,
+ .cm_dll_ctrl = 0x4a004110,
+ .cm_clkmode_dpll_core = 0x4a004120,
+ .cm_idlest_dpll_core = 0x4a004124,
+ .cm_autoidle_dpll_core = 0x4a004128,
+ .cm_clksel_dpll_core = 0x4a00412c,
+ .cm_div_m2_dpll_core = 0x4a004130,
+ .cm_div_m3_dpll_core = 0x4a004134,
+ .cm_div_h11_dpll_core = 0x4a004138,
+ .cm_div_h12_dpll_core = 0x4a00413c,
+ .cm_div_h13_dpll_core = 0x4a004140,
+ .cm_div_h14_dpll_core = 0x4a004144,
+ .cm_ssc_deltamstep_dpll_core = 0x4a004148,
+ .cm_ssc_modfreqdiv_dpll_core = 0x4a00414c,
+ .cm_div_h21_dpll_core = 0x4a004150,
+ .cm_div_h22_dpllcore = 0x4a004154,
+ .cm_div_h23_dpll_core = 0x4a004158,
+ .cm_div_h24_dpll_core = 0x4a00415c,
+ .cm_clkmode_dpll_mpu = 0x4a004160,
+ .cm_idlest_dpll_mpu = 0x4a004164,
+ .cm_autoidle_dpll_mpu = 0x4a004168,
+ .cm_clksel_dpll_mpu = 0x4a00416c,
+ .cm_div_m2_dpll_mpu = 0x4a004170,
+ .cm_ssc_deltamstep_dpll_mpu = 0x4a004188,
+ .cm_ssc_modfreqdiv_dpll_mpu = 0x4a00418c,
+ .cm_bypclk_dpll_mpu = 0x4a00419c,
+ .cm_clkmode_dpll_iva = 0x4a0041a0,
+ .cm_idlest_dpll_iva = 0x4a0041a4,
+ .cm_autoidle_dpll_iva = 0x4a0041a8,
+ .cm_clksel_dpll_iva = 0x4a0041ac,
+ .cm_div_h11_dpll_iva = 0x4a0041b8,
+ .cm_div_h12_dpll_iva = 0x4a0041bc,
+ .cm_ssc_deltamstep_dpll_iva = 0x4a0041c8,
+ .cm_ssc_modfreqdiv_dpll_iva = 0x4a0041cc,
+ .cm_bypclk_dpll_iva = 0x4a0041dc,
+ .cm_clkmode_dpll_abe = 0x4a0041e0,
+ .cm_idlest_dpll_abe = 0x4a0041e4,
+ .cm_autoidle_dpll_abe = 0x4a0041e8,
+ .cm_clksel_dpll_abe = 0x4a0041ec,
+ .cm_div_m2_dpll_abe = 0x4a0041f0,
+ .cm_div_m3_dpll_abe = 0x4a0041f4,
+ .cm_ssc_deltamstep_dpll_abe = 0x4a004208,
+ .cm_ssc_modfreqdiv_dpll_abe = 0x4a00420c,
+ .cm_clkmode_dpll_ddrphy = 0x4a004220,
+ .cm_idlest_dpll_ddrphy = 0x4a004224,
+ .cm_autoidle_dpll_ddrphy = 0x4a004228,
+ .cm_clksel_dpll_ddrphy = 0x4a00422c,
+ .cm_div_m2_dpll_ddrphy = 0x4a004230,
+ .cm_div_h11_dpll_ddrphy = 0x4a004238,
+ .cm_div_h12_dpll_ddrphy = 0x4a00423c,
+ .cm_div_h13_dpll_ddrphy = 0x4a004240,
+ .cm_ssc_deltamstep_dpll_ddrphy = 0x4a004248,
+ .cm_shadow_freq_config1 = 0x4a004260,
+ .cm_mpu_mpu_clkctrl = 0x4a004320,
+
+ /* cm1.dsp */
+ .cm_dsp_clkstctrl = 0x4a004400,
+ .cm_dsp_dsp_clkctrl = 0x4a004420,
+
+ /* cm1.abe */
+ .cm1_abe_clkstctrl = 0x4a004500,
+ .cm1_abe_l4abe_clkctrl = 0x4a004520,
+ .cm1_abe_aess_clkctrl = 0x4a004528,
+ .cm1_abe_pdm_clkctrl = 0x4a004530,
+ .cm1_abe_dmic_clkctrl = 0x4a004538,
+ .cm1_abe_mcasp_clkctrl = 0x4a004540,
+ .cm1_abe_mcbsp1_clkctrl = 0x4a004548,
+ .cm1_abe_mcbsp2_clkctrl = 0x4a004550,
+ .cm1_abe_mcbsp3_clkctrl = 0x4a004558,
+ .cm1_abe_slimbus_clkctrl = 0x4a004560,
+ .cm1_abe_timer5_clkctrl = 0x4a004568,
+ .cm1_abe_timer6_clkctrl = 0x4a004570,
+ .cm1_abe_timer7_clkctrl = 0x4a004578,
+ .cm1_abe_timer8_clkctrl = 0x4a004580,
+ .cm1_abe_wdt3_clkctrl = 0x4a004588,
+
+
+
+ /* cm2.ckgen */
+ .cm_clksel_mpu_m3_iss_root = 0x4a008100,
+ .cm_clksel_usb_60mhz = 0x4a008104,
+ .cm_scale_fclk = 0x4a008108,
+ .cm_core_dvfs_perf1 = 0x4a008110,
+ .cm_core_dvfs_perf2 = 0x4a008114,
+ .cm_core_dvfs_perf3 = 0x4a008118,
+ .cm_core_dvfs_perf4 = 0x4a00811c,
+ .cm_core_dvfs_current = 0x4a008124,
+ .cm_iva_dvfs_perf_tesla = 0x4a008128,
+ .cm_iva_dvfs_perf_ivahd = 0x4a00812c,
+ .cm_iva_dvfs_perf_abe = 0x4a008130,
+ .cm_iva_dvfs_current = 0x4a008138,
+ .cm_clkmode_dpll_per = 0x4a008140,
+ .cm_idlest_dpll_per = 0x4a008144,
+ .cm_autoidle_dpll_per = 0x4a008148,
+ .cm_clksel_dpll_per = 0x4a00814c,
+ .cm_div_m2_dpll_per = 0x4a008150,
+ .cm_div_m3_dpll_per = 0x4a008154,
+ .cm_div_h11_dpll_per = 0x4a008158,
+ .cm_div_h12_dpll_per = 0x4a00815c,
+ .cm_div_h13_dpll_per = 0x4a008160,
+ .cm_div_h14_dpll_per = 0x4a008164,
+ .cm_ssc_deltamstep_dpll_per = 0x4a008168,
+ .cm_ssc_modfreqdiv_dpll_per = 0x4a00816c,
+ .cm_emu_override_dpll_per = 0x4a008170,
+ .cm_clkmode_dpll_usb = 0x4a008180,
+ .cm_idlest_dpll_usb = 0x4a008184,
+ .cm_autoidle_dpll_usb = 0x4a008188,
+ .cm_clksel_dpll_usb = 0x4a00818c,
+ .cm_div_m2_dpll_usb = 0x4a008190,
+ .cm_ssc_deltamstep_dpll_usb = 0x4a0081a8,
+ .cm_ssc_modfreqdiv_dpll_usb = 0x4a0081ac,
+ .cm_clkdcoldo_dpll_usb = 0x4a0081b4,
+ .cm_clkmode_dpll_unipro = 0x4a0081c0,
+ .cm_idlest_dpll_unipro = 0x4a0081c4,
+ .cm_autoidle_dpll_unipro = 0x4a0081c8,
+ .cm_clksel_dpll_unipro = 0x4a0081cc,
+ .cm_div_m2_dpll_unipro = 0x4a0081d0,
+ .cm_ssc_deltamstep_dpll_unipro = 0x4a0081e8,
+ .cm_ssc_modfreqdiv_dpll_unipro = 0x4a0081ec,
+ .cm_coreaon_bandgap_clkctrl = 0x4a008648,
+ .cm_coreaon_io_srcomp_clkctrl = 0x4a008650,
+
+ /* cm2.core */
+ .cm_l3_1_clkstctrl = 0x4a008700,
+ .cm_l3_1_dynamicdep = 0x4a008708,
+ .cm_l3_1_l3_1_clkctrl = 0x4a008720,
+ .cm_l3_2_clkstctrl = 0x4a008800,
+ .cm_l3_2_dynamicdep = 0x4a008808,
+ .cm_l3_2_l3_2_clkctrl = 0x4a008820,
+ .cm_l3_gpmc_clkctrl = 0x4a008828,
+ .cm_l3_2_ocmc_ram_clkctrl = 0x4a008830,
+ .cm_mpu_m3_clkstctrl = 0x4a008900,
+ .cm_mpu_m3_staticdep = 0x4a008904,
+ .cm_mpu_m3_dynamicdep = 0x4a008908,
+ .cm_mpu_m3_mpu_m3_clkctrl = 0x4a008920,
+ .cm_sdma_clkstctrl = 0x4a008a00,
+ .cm_sdma_staticdep = 0x4a008a04,
+ .cm_sdma_dynamicdep = 0x4a008a08,
+ .cm_sdma_sdma_clkctrl = 0x4a008a20,
+ .cm_memif_clkstctrl = 0x4a008b00,
+ .cm_memif_dmm_clkctrl = 0x4a008b20,
+ .cm_memif_emif_fw_clkctrl = 0x4a008b28,
+ .cm_memif_emif_1_clkctrl = 0x4a008b30,
+ .cm_memif_emif_2_clkctrl = 0x4a008b38,
+ .cm_memif_dll_clkctrl = 0x4a008b40,
+ .cm_memif_emif_h1_clkctrl = 0x4a008b50,
+ .cm_memif_emif_h2_clkctrl = 0x4a008b58,
+ .cm_memif_dll_h_clkctrl = 0x4a008b60,
+ .cm_c2c_clkstctrl = 0x4a008c00,
+ .cm_c2c_staticdep = 0x4a008c04,
+ .cm_c2c_dynamicdep = 0x4a008c08,
+ .cm_c2c_sad2d_clkctrl = 0x4a008c20,
+ .cm_c2c_modem_icr_clkctrl = 0x4a008c28,
+ .cm_c2c_sad2d_fw_clkctrl = 0x4a008c30,
+ .cm_l4cfg_clkstctrl = 0x4a008d00,
+ .cm_l4cfg_dynamicdep = 0x4a008d08,
+ .cm_l4cfg_l4_cfg_clkctrl = 0x4a008d20,
+ .cm_l4cfg_hw_sem_clkctrl = 0x4a008d28,
+ .cm_l4cfg_mailbox_clkctrl = 0x4a008d30,
+ .cm_l4cfg_sar_rom_clkctrl = 0x4a008d38,
+ .cm_l3instr_clkstctrl = 0x4a008e00,
+ .cm_l3instr_l3_3_clkctrl = 0x4a008e20,
+ .cm_l3instr_l3_instr_clkctrl = 0x4a008e28,
+ .cm_l3instr_intrconn_wp1_clkctrl = 0x4a008e40,
+ .cm_l4per_clkstctrl = 0x4a009000,
+ .cm_l4per_dynamicdep = 0x4a009008,
+ .cm_l4per_adc_clkctrl = 0x4a009020,
+ .cm_l4per_gptimer10_clkctrl = 0x4a009028,
+ .cm_l4per_gptimer11_clkctrl = 0x4a009030,
+ .cm_l4per_gptimer2_clkctrl = 0x4a009038,
+ .cm_l4per_gptimer3_clkctrl = 0x4a009040,
+ .cm_l4per_gptimer4_clkctrl = 0x4a009048,
+ .cm_l4per_gptimer9_clkctrl = 0x4a009050,
+ .cm_l4per_elm_clkctrl = 0x4a009058,
+ .cm_l4per_gpio2_clkctrl = 0x4a009060,
+ .cm_l4per_gpio3_clkctrl = 0x4a009068,
+ .cm_l4per_gpio4_clkctrl = 0x4a009070,
+ .cm_l4per_gpio5_clkctrl = 0x4a009078,
+ .cm_l4per_gpio6_clkctrl = 0x4a009080,
+ .cm_l4per_hdq1w_clkctrl = 0x4a009088,
+ .cm_l4per_hecc1_clkctrl = 0x4a009090,
+ .cm_l4per_hecc2_clkctrl = 0x4a009098,
+ .cm_l4per_i2c1_clkctrl = 0x4a0090a0,
+ .cm_l4per_i2c2_clkctrl = 0x4a0090a8,
+ .cm_l4per_i2c3_clkctrl = 0x4a0090b0,
+ .cm_l4per_i2c4_clkctrl = 0x4a0090b8,
+ .cm_l4per_l4per_clkctrl = 0x4a0090c0,
+ .cm_l4per_mcasp2_clkctrl = 0x4a0090d0,
+ .cm_l4per_mcasp3_clkctrl = 0x4a0090d8,
+ .cm_l4per_mgate_clkctrl = 0x4a0090e8,
+ .cm_l4per_mcspi1_clkctrl = 0x4a0090f0,
+ .cm_l4per_mcspi2_clkctrl = 0x4a0090f8,
+ .cm_l4per_mcspi3_clkctrl = 0x4a009100,
+ .cm_l4per_mcspi4_clkctrl = 0x4a009108,
+ .cm_l4per_gpio7_clkctrl = 0x4a009110,
+ .cm_l4per_gpio8_clkctrl = 0x4a009118,
+ .cm_l4per_mmcsd3_clkctrl = 0x4a009120,
+ .cm_l4per_mmcsd4_clkctrl = 0x4a009128,
+ .cm_l4per_msprohg_clkctrl = 0x4a009130,
+ .cm_l4per_slimbus2_clkctrl = 0x4a009138,
+ .cm_l4per_uart1_clkctrl = 0x4a009140,
+ .cm_l4per_uart2_clkctrl = 0x4a009148,
+ .cm_l4per_uart3_clkctrl = 0x4a009150,
+ .cm_l4per_uart4_clkctrl = 0x4a009158,
+ .cm_l4per_mmcsd5_clkctrl = 0x4a009160,
+ .cm_l4per_i2c5_clkctrl = 0x4a009168,
+ .cm_l4per_uart5_clkctrl = 0x4a009170,
+ .cm_l4per_uart6_clkctrl = 0x4a009178,
+ .cm_l4sec_clkstctrl = 0x4a009180,
+ .cm_l4sec_staticdep = 0x4a009184,
+ .cm_l4sec_dynamicdep = 0x4a009188,
+ .cm_l4sec_aes1_clkctrl = 0x4a0091a0,
+ .cm_l4sec_aes2_clkctrl = 0x4a0091a8,
+ .cm_l4sec_des3des_clkctrl = 0x4a0091b0,
+ .cm_l4sec_pkaeip29_clkctrl = 0x4a0091b8,
+ .cm_l4sec_rng_clkctrl = 0x4a0091c0,
+ .cm_l4sec_sha2md51_clkctrl = 0x4a0091c8,
+ .cm_l4sec_cryptodma_clkctrl = 0x4a0091d8,
+
+ /* cm2.ivahd */
+ .cm_ivahd_clkstctrl = 0x4a009200,
+ .cm_ivahd_ivahd_clkctrl = 0x4a009220,
+ .cm_ivahd_sl2_clkctrl = 0x4a009228,
+
+ /* cm2.cam */
+ .cm_cam_clkstctrl = 0x4a009300,
+ .cm_cam_iss_clkctrl = 0x4a009320,
+ .cm_cam_fdif_clkctrl = 0x4a009328,
+
+ /* cm2.dss */
+ .cm_dss_clkstctrl = 0x4a009400,
+ .cm_dss_dss_clkctrl = 0x4a009420,
+
+ /* cm2.sgx */
+ .cm_sgx_clkstctrl = 0x4a009500,
+ .cm_sgx_sgx_clkctrl = 0x4a009520,
+
+ /* cm2.l3init */
+ .cm_l3init_clkstctrl = 0x4a009600,
+
+ /* cm2.l3init */
+ .cm_l3init_hsmmc1_clkctrl = 0x4a009628,
+ .cm_l3init_hsmmc2_clkctrl = 0x4a009630,
+ .cm_l3init_hsi_clkctrl = 0x4a009638,
+ .cm_l3init_hsusbhost_clkctrl = 0x4a009658,
+ .cm_l3init_hsusbotg_clkctrl = 0x4a009660,
+ .cm_l3init_hsusbtll_clkctrl = 0x4a009668,
+ .cm_l3init_p1500_clkctrl = 0x4a009678,
+ .cm_l3init_fsusb_clkctrl = 0x4a0096d0,
+ .cm_l3init_ocp2scp1_clkctrl = 0x4a0096e0,
+
+ /* l4 wkup regs */
+ .cm_abe_pll_ref_clksel = 0x4ae0610c,
+ .cm_sys_clksel = 0x4ae06110,
+ .cm_wkup_clkstctrl = 0x4ae07900,
+ .cm_wkup_l4wkup_clkctrl = 0x4ae07920,
+ .cm_wkup_wdtimer1_clkctrl = 0x4ae07928,
+ .cm_wkup_wdtimer2_clkctrl = 0x4ae07930,
+ .cm_wkup_gpio1_clkctrl = 0x4ae07938,
+ .cm_wkup_gptimer1_clkctrl = 0x4ae07940,
+ .cm_wkup_gptimer12_clkctrl = 0x4ae07948,
+ .cm_wkup_synctimer_clkctrl = 0x4ae07950,
+ .cm_wkup_usim_clkctrl = 0x4ae07958,
+ .cm_wkup_sarram_clkctrl = 0x4ae07960,
+ .cm_wkup_keyboard_clkctrl = 0x4ae07978,
+ .cm_wkup_rtc_clkctrl = 0x4ae07980,
+ .cm_wkup_bandgap_clkctrl = 0x4ae07988,
+ .cm_wkupaon_scrm_clkctrl = 0x4ae07990,
+ .cm_wkupaon_io_srcomp_clkctrl = 0x4ae07998,
+ .prm_rstctrl = 0x4ae07c00,
+ .prm_rstst = 0x4ae07c04,
+ .prm_vc_val_bypass = 0x4ae07ca0,
+ .prm_vc_cfg_i2c_mode = 0x4ae07cb4,
+ .prm_vc_cfg_i2c_clk = 0x4ae07cb8,
+
+ .prm_sldo_core_setup = 0x4ae07cc4,
+ .prm_sldo_core_ctrl = 0x4ae07cc8,
+ .prm_sldo_mpu_setup = 0x4ae07ccc,
+ .prm_sldo_mpu_ctrl = 0x4ae07cd0,
+ .prm_sldo_mm_setup = 0x4ae07cd4,
+ .prm_sldo_mm_ctrl = 0x4ae07cd8,
+};
+
+struct prcm_regs const dra7xx_prcm = {
+ /* cm1.ckgen */
+ .cm_clksel_core = 0x4a005100,
+ .cm_clksel_abe = 0x4a005108,
+ .cm_dll_ctrl = 0x4a005110,
+ .cm_clkmode_dpll_core = 0x4a005120,
+ .cm_idlest_dpll_core = 0x4a005124,
+ .cm_autoidle_dpll_core = 0x4a005128,
+ .cm_clksel_dpll_core = 0x4a00512c,
+ .cm_div_m2_dpll_core = 0x4a005130,
+ .cm_div_m3_dpll_core = 0x4a005134,
+ .cm_div_h11_dpll_core = 0x4a005138,
+ .cm_div_h12_dpll_core = 0x4a00513c,
+ .cm_div_h13_dpll_core = 0x4a005140,
+ .cm_div_h14_dpll_core = 0x4a005144,
+ .cm_ssc_deltamstep_dpll_core = 0x4a005148,
+ .cm_ssc_modfreqdiv_dpll_core = 0x4a00514c,
+ .cm_div_h21_dpll_core = 0x4a005150,
+ .cm_div_h22_dpllcore = 0x4a005154,
+ .cm_div_h23_dpll_core = 0x4a005158,
+ .cm_div_h24_dpll_core = 0x4a00515c,
+ .cm_clkmode_dpll_mpu = 0x4a005160,
+ .cm_idlest_dpll_mpu = 0x4a005164,
+ .cm_autoidle_dpll_mpu = 0x4a005168,
+ .cm_clksel_dpll_mpu = 0x4a00516c,
+ .cm_div_m2_dpll_mpu = 0x4a005170,
+ .cm_ssc_deltamstep_dpll_mpu = 0x4a005188,
+ .cm_ssc_modfreqdiv_dpll_mpu = 0x4a00518c,
+ .cm_bypclk_dpll_mpu = 0x4a00519c,
+ .cm_clkmode_dpll_iva = 0x4a0051a0,
+ .cm_idlest_dpll_iva = 0x4a0051a4,
+ .cm_autoidle_dpll_iva = 0x4a0051a8,
+ .cm_clksel_dpll_iva = 0x4a0051ac,
+ .cm_ssc_deltamstep_dpll_iva = 0x4a0051c8,
+ .cm_ssc_modfreqdiv_dpll_iva = 0x4a0051cc,
+ .cm_bypclk_dpll_iva = 0x4a0051dc,
+ .cm_clkmode_dpll_abe = 0x4a0051e0,
+ .cm_idlest_dpll_abe = 0x4a0051e4,
+ .cm_autoidle_dpll_abe = 0x4a0051e8,
+ .cm_clksel_dpll_abe = 0x4a0051ec,
+ .cm_div_m2_dpll_abe = 0x4a0051f0,
+ .cm_div_m3_dpll_abe = 0x4a0051f4,
+ .cm_ssc_deltamstep_dpll_abe = 0x4a005208,
+ .cm_ssc_modfreqdiv_dpll_abe = 0x4a00520c,
+ .cm_clkmode_dpll_ddrphy = 0x4a005210,
+ .cm_idlest_dpll_ddrphy = 0x4a005214,
+ .cm_autoidle_dpll_ddrphy = 0x4a005218,
+ .cm_clksel_dpll_ddrphy = 0x4a00521c,
+ .cm_div_m2_dpll_ddrphy = 0x4a005220,
+ .cm_div_h11_dpll_ddrphy = 0x4a005228,
+ .cm_ssc_deltamstep_dpll_ddrphy = 0x4a00522c,
+ .cm_clkmode_dpll_dsp = 0x4a005234,
+ .cm_shadow_freq_config1 = 0x4a005260,
+
+ /* cm1.mpu */
+ .cm_mpu_mpu_clkctrl = 0x4a005320,
+
+ /* cm1.dsp */
+ .cm_dsp_clkstctrl = 0x4a005400,
+ .cm_dsp_dsp_clkctrl = 0x4a005420,
+
+ /* cm2.ckgen */
+ .cm_clksel_usb_60mhz = 0x4a008104,
+ .cm_clkmode_dpll_per = 0x4a008140,
+ .cm_idlest_dpll_per = 0x4a008144,
+ .cm_autoidle_dpll_per = 0x4a008148,
+ .cm_clksel_dpll_per = 0x4a00814c,
+ .cm_div_m2_dpll_per = 0x4a008150,
+ .cm_div_m3_dpll_per = 0x4a008154,
+ .cm_div_h11_dpll_per = 0x4a008158,
+ .cm_div_h12_dpll_per = 0x4a00815c,
+ .cm_div_h13_dpll_per = 0x4a008160,
+ .cm_div_h14_dpll_per = 0x4a008164,
+ .cm_ssc_deltamstep_dpll_per = 0x4a008168,
+ .cm_ssc_modfreqdiv_dpll_per = 0x4a00816c,
+ .cm_clkmode_dpll_usb = 0x4a008180,
+ .cm_idlest_dpll_usb = 0x4a008184,
+ .cm_autoidle_dpll_usb = 0x4a008188,
+ .cm_clksel_dpll_usb = 0x4a00818c,
+ .cm_div_m2_dpll_usb = 0x4a008190,
+ .cm_ssc_deltamstep_dpll_usb = 0x4a0081a8,
+ .cm_ssc_modfreqdiv_dpll_usb = 0x4a0081ac,
+ .cm_clkdcoldo_dpll_usb = 0x4a0081b4,
+ .cm_clkmode_dpll_pcie_ref = 0x4a008200,
+ .cm_clkmode_apll_pcie = 0x4a00821c,
+ .cm_idlest_apll_pcie = 0x4a008220,
+ .cm_div_m2_apll_pcie = 0x4a008224,
+ .cm_clkvcoldo_apll_pcie = 0x4a008228,
+
+ /* cm2.core */
+ .cm_l3_1_clkstctrl = 0x4a008700,
+ .cm_l3_1_dynamicdep = 0x4a008708,
+ .cm_l3_1_l3_1_clkctrl = 0x4a008720,
+ .cm_l3_gpmc_clkctrl = 0x4a008728,
+ .cm_mpu_m3_clkstctrl = 0x4a008900,
+ .cm_mpu_m3_staticdep = 0x4a008904,
+ .cm_mpu_m3_dynamicdep = 0x4a008908,
+ .cm_mpu_m3_mpu_m3_clkctrl = 0x4a008920,
+ .cm_sdma_clkstctrl = 0x4a008a00,
+ .cm_sdma_staticdep = 0x4a008a04,
+ .cm_sdma_dynamicdep = 0x4a008a08,
+ .cm_sdma_sdma_clkctrl = 0x4a008a20,
+ .cm_memif_clkstctrl = 0x4a008b00,
+ .cm_memif_dmm_clkctrl = 0x4a008b20,
+ .cm_memif_emif_fw_clkctrl = 0x4a008b28,
+ .cm_memif_emif_1_clkctrl = 0x4a008b30,
+ .cm_memif_emif_2_clkctrl = 0x4a008b38,
+ .cm_memif_dll_clkctrl = 0x4a008b40,
+ .cm_l4cfg_clkstctrl = 0x4a008d00,
+ .cm_l4cfg_dynamicdep = 0x4a008d08,
+ .cm_l4cfg_l4_cfg_clkctrl = 0x4a008d20,
+ .cm_l4cfg_hw_sem_clkctrl = 0x4a008d28,
+ .cm_l4cfg_mailbox_clkctrl = 0x4a008d30,
+ .cm_l4cfg_sar_rom_clkctrl = 0x4a008d38,
+ .cm_l3instr_clkstctrl = 0x4a008e00,
+ .cm_l3instr_l3_3_clkctrl = 0x4a008e20,
+ .cm_l3instr_l3_instr_clkctrl = 0x4a008e28,
+ .cm_l3instr_intrconn_wp1_clkctrl = 0x4a008e40,
+
+ /* cm2.ivahd */
+ .cm_ivahd_clkstctrl = 0x4a008f00,
+ .cm_ivahd_ivahd_clkctrl = 0x4a008f20,
+ .cm_ivahd_sl2_clkctrl = 0x4a008f28,
+
+ /* cm2.cam */
+ .cm_cam_clkstctrl = 0x4a009000,
+ .cm_cam_vip1_clkctrl = 0x4a009020,
+ .cm_cam_vip2_clkctrl = 0x4a009028,
+ .cm_cam_vip3_clkctrl = 0x4a009030,
+ .cm_cam_lvdsrx_clkctrl = 0x4a009038,
+ .cm_cam_csi1_clkctrl = 0x4a009040,
+ .cm_cam_csi2_clkctrl = 0x4a009048,
+
+ /* cm2.dss */
+ .cm_dss_clkstctrl = 0x4a009100,
+ .cm_dss_dss_clkctrl = 0x4a009120,
+
+ /* cm2.sgx */
+ .cm_sgx_clkstctrl = 0x4a009200,
+ .cm_sgx_sgx_clkctrl = 0x4a009220,
+
+ /* cm2.l3init */
+ .cm_l3init_clkstctrl = 0x4a009300,
+
+ /* cm2.l3init */
+ .cm_l3init_hsmmc1_clkctrl = 0x4a009328,
+ .cm_l3init_hsmmc2_clkctrl = 0x4a009330,
+ .cm_l3init_hsusbhost_clkctrl = 0x4a009340,
+ .cm_l3init_hsusbotg_clkctrl = 0x4a009348,
+ .cm_l3init_hsusbtll_clkctrl = 0x4a009350,
+ .cm_l3init_ocp2scp1_clkctrl = 0x4a0093e0,
+
+ /* cm2.l4per */
+ .cm_l4per_clkstctrl = 0x4a009700,
+ .cm_l4per_dynamicdep = 0x4a009708,
+ .cm_l4per_gptimer10_clkctrl = 0x4a009728,
+ .cm_l4per_gptimer11_clkctrl = 0x4a009730,
+ .cm_l4per_gptimer2_clkctrl = 0x4a009738,
+ .cm_l4per_gptimer3_clkctrl = 0x4a009740,
+ .cm_l4per_gptimer4_clkctrl = 0x4a009748,
+ .cm_l4per_gptimer9_clkctrl = 0x4a009750,
+ .cm_l4per_elm_clkctrl = 0x4a009758,
+ .cm_l4per_gpio2_clkctrl = 0x4a009760,
+ .cm_l4per_gpio3_clkctrl = 0x4a009768,
+ .cm_l4per_gpio4_clkctrl = 0x4a009770,
+ .cm_l4per_gpio5_clkctrl = 0x4a009778,
+ .cm_l4per_gpio6_clkctrl = 0x4a009780,
+ .cm_l4per_hdq1w_clkctrl = 0x4a009788,
+ .cm_l4per_i2c1_clkctrl = 0x4a0097a0,
+ .cm_l4per_i2c2_clkctrl = 0x4a0097a8,
+ .cm_l4per_i2c3_clkctrl = 0x4a0097b0,
+ .cm_l4per_i2c4_clkctrl = 0x4a0097b8,
+ .cm_l4per_l4per_clkctrl = 0x4a0097c0,
+ .cm_l4per_mcspi1_clkctrl = 0x4a0097f0,
+ .cm_l4per_mcspi2_clkctrl = 0x4a0097f8,
+ .cm_l4per_mcspi3_clkctrl = 0x4a009800,
+ .cm_l4per_mcspi4_clkctrl = 0x4a009808,
+ .cm_l4per_gpio7_clkctrl = 0x4a009810,
+ .cm_l4per_gpio8_clkctrl = 0x4a009818,
+ .cm_l4per_mmcsd3_clkctrl = 0x4a009820,
+ .cm_l4per_mmcsd4_clkctrl = 0x4a009828,
+ .cm_l4per_uart1_clkctrl = 0x4a009840,
+ .cm_l4per_uart2_clkctrl = 0x4a009848,
+ .cm_l4per_uart3_clkctrl = 0x4a009850,
+ .cm_l4per_uart4_clkctrl = 0x4a009858,
+ .cm_l4per_uart5_clkctrl = 0x4a009870,
+ .cm_l4sec_clkstctrl = 0x4a009880,
+ .cm_l4sec_staticdep = 0x4a009884,
+ .cm_l4sec_dynamicdep = 0x4a009888,
+ .cm_l4sec_aes1_clkctrl = 0x4a0098a0,
+ .cm_l4sec_aes2_clkctrl = 0x4a0098a8,
+ .cm_l4sec_des3des_clkctrl = 0x4a0098b0,
+ .cm_l4sec_rng_clkctrl = 0x4a0098c0,
+ .cm_l4sec_sha2md51_clkctrl = 0x4a0098c8,
+ .cm_l4sec_cryptodma_clkctrl = 0x4a0098d8,
+
+ /* l4 wkup regs */
+ .cm_abe_pll_ref_clksel = 0x4ae0610c,
+ .cm_sys_clksel = 0x4ae06110,
+ .cm_wkup_clkstctrl = 0x4ae07800,
+ .cm_wkup_l4wkup_clkctrl = 0x4ae07820,
+ .cm_wkup_wdtimer1_clkctrl = 0x4ae07828,
+ .cm_wkup_wdtimer2_clkctrl = 0x4ae07830,
+ .cm_wkup_gpio1_clkctrl = 0x4ae07838,
+ .cm_wkup_gptimer1_clkctrl = 0x4ae07840,
+ .cm_wkup_gptimer12_clkctrl = 0x4ae07848,
+ .cm_wkup_sarram_clkctrl = 0x4ae07860,
+ .cm_wkup_keyboard_clkctrl = 0x4ae07878,
+ .cm_wkupaon_scrm_clkctrl = 0x4ae07890,
+ .prm_rstctrl = 0x4ae07d00,
+ .prm_rstst = 0x4ae07d04,
+ .prm_vc_val_bypass = 0x4ae07da0,
+ .prm_vc_cfg_i2c_mode = 0x4ae07db4,
+ .prm_vc_cfg_i2c_clk = 0x4ae07db8,
+};
diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c
index 6ebdf5f..6b461e4 100644
--- a/arch/arm/cpu/armv7/omap5/sdram.c
+++ b/arch/arm/cpu/armv7/omap5/sdram.c
@@ -67,6 +67,25 @@ const struct emif_regs emif_regs_532_mhz_2cs = {
.emif_ddr_ext_phy_ctrl_5 = 0x04010040
};
+const struct emif_regs emif_regs_532_mhz_2cs_es2 = {
+ .sdram_config_init = 0x80800EBA,
+ .sdram_config = 0x808022BA,
+ .ref_ctrl = 0x0000081A,
+ .sdram_tim1 = 0x772F6873,
+ .sdram_tim2 = 0x304a129a,
+ .sdram_tim3 = 0x02f7e45f,
+ .read_idle_ctrl = 0x00050000,
+ .zq_config = 0x100b3215,
+ .temp_alert_config = 0x08000a05,
+ .emif_ddr_phy_ctlr_1_init = 0x0E30400d,
+ .emif_ddr_phy_ctlr_1 = 0x0E30400d,
+ .emif_ddr_ext_phy_ctrl_1 = 0x04020080,
+ .emif_ddr_ext_phy_ctrl_2 = 0x28C518A3,
+ .emif_ddr_ext_phy_ctrl_3 = 0x518A3146,
+ .emif_ddr_ext_phy_ctrl_4 = 0x0014628C,
+ .emif_ddr_ext_phy_ctrl_5 = 0xC330CC33,
+};
+
const struct emif_regs emif_regs_266_mhz_2cs = {
.sdram_config_init = 0x80800EBA,
.sdram_config = 0x808022BA,
@@ -109,13 +128,111 @@ const struct emif_regs emif_regs_ddr3_532_mhz_1cs = {
.emif_rd_wr_exec_thresh = 0x00000305
};
+const struct emif_regs emif_regs_ddr3_532_mhz_1cs_es2 = {
+ .sdram_config_init = 0x61851B32,
+ .sdram_config = 0x61851B32,
+ .ref_ctrl = 0x00001035,
+ .sdram_tim1 = 0xCCCF36B3,
+ .sdram_tim2 = 0x308F7FDA,
+ .sdram_tim3 = 0x027F88A8,
+ .read_idle_ctrl = 0x00050000,
+ .zq_config = 0x1007190B,
+ .temp_alert_config = 0x00000000,
+ .emif_ddr_phy_ctlr_1_init = 0x0030400A,
+ .emif_ddr_phy_ctlr_1 = 0x0034400A,
+ .emif_ddr_ext_phy_ctrl_1 = 0x04040100,
+ .emif_ddr_ext_phy_ctrl_2 = 0x00000000,
+ .emif_ddr_ext_phy_ctrl_3 = 0x00000000,
+ .emif_ddr_ext_phy_ctrl_4 = 0x00000000,
+ .emif_ddr_ext_phy_ctrl_5 = 0x4350D435,
+ .emif_rd_wr_lvl_rmp_win = 0x00000000,
+ .emif_rd_wr_lvl_rmp_ctl = 0x80000000,
+ .emif_rd_wr_lvl_ctl = 0x00000000,
+ .emif_rd_wr_exec_thresh = 0x40000305
+};
+
const struct dmm_lisa_map_regs lisa_map_4G_x_2_x_2 = {
.dmm_lisa_map_0 = 0x0,
.dmm_lisa_map_1 = 0x0,
.dmm_lisa_map_2 = 0x80740300,
- .dmm_lisa_map_3 = 0xFF020100
+ .dmm_lisa_map_3 = 0xFF020100,
+ .is_ma_present = 0x1
+};
+
+const struct dmm_lisa_map_regs lisa_map_512M_x_1 = {
+ .dmm_lisa_map_0 = 0x0,
+ .dmm_lisa_map_1 = 0x0,
+ .dmm_lisa_map_2 = 0x0,
+ .dmm_lisa_map_3 = 0x80500100,
+ .is_ma_present = 0x1
+};
+
+static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs)
+{
+ switch (omap_revision()) {
+ case OMAP5430_ES1_0:
+ *regs = &emif_regs_532_mhz_2cs;
+ break;
+ case OMAP5432_ES1_0:
+ *regs = &emif_regs_ddr3_532_mhz_1cs;
+ break;
+ case OMAP5430_ES2_0:
+ *regs = &emif_regs_532_mhz_2cs_es2;
+ break;
+ case OMAP5432_ES2_0:
+ case DRA752_ES1_0:
+ default:
+ *regs = &emif_regs_ddr3_532_mhz_1cs_es2;
+ }
+}
+
+void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
+ __attribute__((weak, alias("emif_get_reg_dump_sdp")));
+
+static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs
+ **dmm_lisa_regs)
+{
+ switch (omap_revision()) {
+ case OMAP5430_ES1_0:
+ case OMAP5430_ES2_0:
+ case OMAP5432_ES1_0:
+ case OMAP5432_ES2_0:
+ *dmm_lisa_regs = &lisa_map_4G_x_2_x_2;
+ break;
+ case DRA752_ES1_0:
+ default:
+ *dmm_lisa_regs = &lisa_map_512M_x_1;
+ }
+
+}
+
+void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
+ __attribute__((weak, alias("emif_get_dmm_regs_sdp")));
+#else
+
+static const struct lpddr2_device_details dev_4G_S4_details = {
+ .type = LPDDR2_TYPE_S4,
+ .density = LPDDR2_DENSITY_4Gb,
+ .io_width = LPDDR2_IO_WIDTH_32,
+ .manufacturer = LPDDR2_MANUFACTURER_SAMSUNG
};
+static void emif_get_device_details_sdp(u32 emif_nr,
+ struct lpddr2_device_details *cs0_device_details,
+ struct lpddr2_device_details *cs1_device_details)
+{
+ /* EMIF1 & EMIF2 have identical configuration */
+ *cs0_device_details = dev_4G_S4_details;
+ *cs1_device_details = dev_4G_S4_details;
+}
+
+void emif_get_device_details(u32 emif_nr,
+ struct lpddr2_device_details *cs0_device_details,
+ struct lpddr2_device_details *cs1_device_details)
+ __attribute__((weak, alias("emif_get_device_details_sdp")));
+
+#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */
+
const u32 ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG] = {
0x01004010,
0x00001004,
@@ -138,7 +255,7 @@ const u32 ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG] = {
0x00000077
};
-const u32 ddr3_ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG] = {
+const u32 ddr3_ext_phy_ctrl_const_base_es1[EMIF_EXT_PHY_CTRL_CONST_REG] = {
0x01004010,
0x00001004,
0x04010040,
@@ -160,54 +277,64 @@ const u32 ddr3_ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG] = {
0x00000057
};
-static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs)
-{
- if (omap_revision() == OMAP5432_ES1_0)
- *regs = &emif_regs_ddr3_532_mhz_1cs;
- else
- *regs = &emif_regs_532_mhz_2cs;
-}
-void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
- __attribute__((weak, alias("emif_get_reg_dump_sdp")));
-
-static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs
- **dmm_lisa_regs)
-{
- *dmm_lisa_regs = &lisa_map_4G_x_2_x_2;
-}
-
-void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
- __attribute__((weak, alias("emif_get_dmm_regs_sdp")));
-
-#else
+const u32 ddr3_ext_phy_ctrl_const_base_es2[EMIF_EXT_PHY_CTRL_CONST_REG] = {
+ 0x50D4350D,
+ 0x00000D43,
+ 0x04010040,
+ 0x01004010,
+ 0x00001004,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x80080080,
+ 0x00800800,
+ 0x08102040,
+ 0x00000002,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000057
+};
-static const struct lpddr2_device_details dev_4G_S4_details = {
- .type = LPDDR2_TYPE_S4,
- .density = LPDDR2_DENSITY_4Gb,
- .io_width = LPDDR2_IO_WIDTH_32,
- .manufacturer = LPDDR2_MANUFACTURER_SAMSUNG
+const struct lpddr2_mr_regs mr_regs = {
+ .mr1 = MR1_BL_8_BT_SEQ_WRAP_EN_NWR_8,
+ .mr2 = 0x6,
+ .mr3 = 0x1,
+ .mr10 = MR10_ZQ_ZQINIT,
+ .mr16 = MR16_REF_FULL_ARRAY
};
-static void emif_get_device_details_sdp(u32 emif_nr,
- struct lpddr2_device_details *cs0_device_details,
- struct lpddr2_device_details *cs1_device_details)
+static void emif_get_ext_phy_ctrl_const_regs(const u32 **regs)
{
- /* EMIF1 & EMIF2 have identical configuration */
- *cs0_device_details = dev_4G_S4_details;
- *cs1_device_details = dev_4G_S4_details;
-}
+ switch (omap_revision()) {
+ case OMAP5430_ES1_0:
+ case OMAP5430_ES2_0:
+ *regs = ext_phy_ctrl_const_base;
+ break;
+ case OMAP5432_ES1_0:
+ *regs = ddr3_ext_phy_ctrl_const_base_es1;
+ break;
+ case OMAP5432_ES2_0:
+ case DRA752_ES1_0:
+ default:
+ *regs = ddr3_ext_phy_ctrl_const_base_es2;
-void emif_get_device_details(u32 emif_nr,
- struct lpddr2_device_details *cs0_device_details,
- struct lpddr2_device_details *cs1_device_details)
- __attribute__((weak, alias("emif_get_device_details_sdp")));
+ }
+}
-#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */
+void get_lpddr2_mr_regs(const struct lpddr2_mr_regs **regs)
+{
+ *regs = &mr_regs;
+}
void do_ext_phy_settings(u32 base, const struct emif_regs *regs)
{
u32 *ext_phy_ctrl_base = 0;
u32 *emif_ext_phy_ctrl_base = 0;
+ const u32 *ext_phy_ctrl_const_regs;
u32 i = 0;
struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
@@ -226,12 +353,13 @@ void do_ext_phy_settings(u32 base, const struct emif_regs *regs)
* external phy 6-24 registers do not change with
* ddr frequency
*/
+ emif_get_ext_phy_ctrl_const_regs(&ext_phy_ctrl_const_regs);
for (i = 0; i < EMIF_EXT_PHY_CTRL_CONST_REG; i++) {
- writel(ext_phy_ctrl_const_base[i],
- emif_ext_phy_ctrl_base++);
+ writel(ext_phy_ctrl_const_regs[i],
+ emif_ext_phy_ctrl_base++);
/* Update shadow registers */
- writel(ext_phy_ctrl_const_base[i],
- emif_ext_phy_ctrl_base++);
+ writel(ext_phy_ctrl_const_regs[i],
+ emif_ext_phy_ctrl_base++);
}
}
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index 141206e..fa5fad1 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -309,6 +309,25 @@ ENTRY(cpu_init_cp15)
orr r0, r0, #0x00001000 @ set bit 12 (I) I-cache
#endif
mcr p15, 0, r0, c1, c0, 0
+
+#ifdef CONFIG_ARM_ERRATA_742230
+ mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register
+ orr r0, r0, #1 << 4 @ set bit #4
+ mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_743622
+ mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register
+ orr r0, r0, #1 << 6 @ set bit #6
+ mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_751472
+ mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register
+ orr r0, r0, #1 << 11 @ set bit #11
+ mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register
+#endif
+
mov pc, lr @ back to my caller
ENDPROC(cpu_init_cp15)
diff --git a/arch/arm/cpu/armv7/tegra20/Makefile b/arch/arm/cpu/armv7/tegra20/Makefile
index 54ed8c4..c8a8504 100644
--- a/arch/arm/cpu/armv7/tegra20/Makefile
+++ b/arch/arm/cpu/armv7/tegra20/Makefile
@@ -27,7 +27,6 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).o
-COBJS-$(CONFIG_USB_EHCI_TEGRA) += usb.o
COBJS-$(CONFIG_PWM_TEGRA) += pwm.o
COBJS-$(CONFIG_VIDEO_TEGRA) += display.o
diff --git a/arch/arm/cpu/armv7/tegra20/usb.c b/arch/arm/cpu/armv7/tegra20/usb.c
deleted file mode 100644
index 1bccf2b..0000000
--- a/arch/arm/cpu/armv7/tegra20/usb.c
+++ /dev/null
@@ -1,567 +0,0 @@
-/*
- * Copyright (c) 2011 The Chromium OS Authors.
- * (C) Copyright 2010,2011 NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm-generic/gpio.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/pinmux.h>
-#include <asm/arch/tegra.h>
-#include <asm/arch/usb.h>
-#include <usb/ulpi.h>
-#include <asm/arch-tegra/clk_rst.h>
-#include <asm/arch-tegra/sys_proto.h>
-#include <asm/arch-tegra/uart.h>
-#include <libfdt.h>
-#include <fdtdec.h>
-
-#ifdef CONFIG_USB_ULPI
- #ifndef CONFIG_USB_ULPI_VIEWPORT
- #error "To use CONFIG_USB_ULPI on Tegra Boards you have to also \
- define CONFIG_USB_ULPI_VIEWPORT"
- #endif
-#endif
-
-enum {
- USB_PORTS_MAX = 4, /* Maximum ports we allow */
-};
-
-/* Parameters we need for USB */
-enum {
- PARAM_DIVN, /* PLL FEEDBACK DIVIDer */
- PARAM_DIVM, /* PLL INPUT DIVIDER */
- PARAM_DIVP, /* POST DIVIDER (2^N) */
- PARAM_CPCON, /* BASE PLLC CHARGE Pump setup ctrl */
- PARAM_LFCON, /* BASE PLLC LOOP FILter setup ctrl */
- PARAM_ENABLE_DELAY_COUNT, /* PLL-U Enable Delay Count */
- PARAM_STABLE_COUNT, /* PLL-U STABLE count */
- PARAM_ACTIVE_DELAY_COUNT, /* PLL-U Active delay count */
- PARAM_XTAL_FREQ_COUNT, /* PLL-U XTAL frequency count */
- PARAM_DEBOUNCE_A_TIME, /* 10MS DELAY for BIAS_DEBOUNCE_A */
- PARAM_BIAS_TIME, /* 20US DELAY AFter bias cell op */
-
- PARAM_COUNT
-};
-
-/* Possible port types (dual role mode) */
-enum dr_mode {
- DR_MODE_NONE = 0,
- DR_MODE_HOST, /* supports host operation */
- DR_MODE_DEVICE, /* supports device operation */
- DR_MODE_OTG, /* supports both */
-};
-
-/* Information about a USB port */
-struct fdt_usb {
- struct usb_ctlr *reg; /* address of registers in physical memory */
- unsigned utmi:1; /* 1 if port has external tranceiver, else 0 */
- unsigned ulpi:1; /* 1 if port has external ULPI transceiver */
- unsigned enabled:1; /* 1 to enable, 0 to disable */
- unsigned has_legacy_mode:1; /* 1 if this port has legacy mode */
- enum dr_mode dr_mode; /* dual role mode */
- enum periph_id periph_id;/* peripheral id */
- struct fdt_gpio_state vbus_gpio; /* GPIO for vbus enable */
- struct fdt_gpio_state phy_reset_gpio; /* GPIO to reset ULPI phy */
-};
-
-static struct fdt_usb port[USB_PORTS_MAX]; /* List of valid USB ports */
-static unsigned port_count; /* Number of available ports */
-
-/*
- * This table has USB timing parameters for each Oscillator frequency we
- * support. There are four sets of values:
- *
- * 1. PLLU configuration information (reference clock is osc/clk_m and
- * PLLU-FOs are fixed at 12MHz/60MHz/480MHz).
- *
- * Reference frequency 13.0MHz 19.2MHz 12.0MHz 26.0MHz
- * ----------------------------------------------------------------------
- * DIVN 960 (0x3c0) 200 (0c8) 960 (3c0h) 960 (3c0)
- * DIVM 13 (0d) 4 (04) 12 (0c) 26 (1a)
- * Filter frequency (MHz) 1 4.8 6 2
- * CPCON 1100b 0011b 1100b 1100b
- * LFCON0 0 0 0 0
- *
- * 2. PLL CONFIGURATION & PARAMETERS for different clock generators:
- *
- * Reference frequency 13.0MHz 19.2MHz 12.0MHz 26.0MHz
- * ---------------------------------------------------------------------------
- * PLLU_ENABLE_DLY_COUNT 02 (0x02) 03 (03) 02 (02) 04 (04)
- * PLLU_STABLE_COUNT 51 (33) 75 (4B) 47 (2F) 102 (66)
- * PLL_ACTIVE_DLY_COUNT 05 (05) 06 (06) 04 (04) 09 (09)
- * XTAL_FREQ_COUNT 127 (7F) 187 (BB) 118 (76) 254 (FE)
- *
- * 3. Debounce values IdDig, Avalid, Bvalid, VbusValid, VbusWakeUp, and
- * SessEnd. Each of these signals have their own debouncer and for each of
- * those one out of two debouncing times can be chosen (BIAS_DEBOUNCE_A or
- * BIAS_DEBOUNCE_B).
- *
- * The values of DEBOUNCE_A and DEBOUNCE_B are calculated as follows:
- * 0xffff -> No debouncing at all
- * <n> ms = <n> *1000 / (1/19.2MHz) / 4
- *
- * So to program a 1 ms debounce for BIAS_DEBOUNCE_A, we have:
- * BIAS_DEBOUNCE_A[15:0] = 1000 * 19.2 / 4 = 4800 = 0x12c0
- *
- * We need to use only DebounceA for BOOTROM. We don't need the DebounceB
- * values, so we can keep those to default.
- *
- * 4. The 20 microsecond delay after bias cell operation.
- */
-static const unsigned usb_pll[CLOCK_OSC_FREQ_COUNT][PARAM_COUNT] = {
- /* DivN, DivM, DivP, CPCON, LFCON, Delays Debounce, Bias */
- { 0x3C0, 0x0D, 0x00, 0xC, 0, 0x02, 0x33, 0x05, 0x7F, 0x7EF4, 5 },
- { 0x0C8, 0x04, 0x00, 0x3, 0, 0x03, 0x4B, 0x06, 0xBB, 0xBB80, 7 },
- { 0x3C0, 0x0C, 0x00, 0xC, 0, 0x02, 0x2F, 0x04, 0x76, 0x7530, 5 },
- { 0x3C0, 0x1A, 0x00, 0xC, 0, 0x04, 0x66, 0x09, 0xFE, 0xFDE8, 9 }
-};
-
-/* UTMIP Idle Wait Delay */
-static const u8 utmip_idle_wait_delay = 17;
-
-/* UTMIP Elastic limit */
-static const u8 utmip_elastic_limit = 16;
-
-/* UTMIP High Speed Sync Start Delay */
-static const u8 utmip_hs_sync_start_delay = 9;
-
-/* Put the port into host mode */
-static void set_host_mode(struct fdt_usb *config)
-{
- /*
- * If we are an OTG port, check if remote host is driving VBus and
- * bail out in this case.
- */
- if (config->dr_mode == DR_MODE_OTG &&
- (readl(&config->reg->phy_vbus_sensors) & VBUS_VLD_STS))
- return;
-
- /*
- * If not driving, we set the GPIO to enable VBUS. We assume
- * that the pinmux is set up correctly for this.
- */
- if (fdt_gpio_isvalid(&config->vbus_gpio)) {
- fdtdec_setup_gpio(&config->vbus_gpio);
- gpio_direction_output(config->vbus_gpio.gpio,
- (config->vbus_gpio.flags & FDT_GPIO_ACTIVE_LOW) ?
- 0 : 1);
- debug("set_host_mode: GPIO %d %s\n", config->vbus_gpio.gpio,
- (config->vbus_gpio.flags & FDT_GPIO_ACTIVE_LOW) ?
- "low" : "high");
- }
-}
-
-void usbf_reset_controller(struct fdt_usb *config, struct usb_ctlr *usbctlr)
-{
- /* Reset the USB controller with 2us delay */
- reset_periph(config->periph_id, 2);
-
- /*
- * Set USB1_NO_LEGACY_MODE to 1, Registers are accessible under
- * base address
- */
- if (config->has_legacy_mode)
- setbits_le32(&usbctlr->usb1_legacy_ctrl, USB1_NO_LEGACY_MODE);
-
- /* Put UTMIP1/3 in reset */
- setbits_le32(&usbctlr->susp_ctrl, UTMIP_RESET);
-
- /* Enable the UTMIP PHY */
- if (config->utmi)
- setbits_le32(&usbctlr->susp_ctrl, UTMIP_PHY_ENB);
-
- /*
- * TODO: where do we take the USB1 out of reset? The old code would
- * take USB3 out of reset, but not USB1. This code doesn't do either.
- */
-}
-
-/* set up the UTMI USB controller with the parameters provided */
-static int init_utmi_usb_controller(struct fdt_usb *config,
- struct usb_ctlr *usbctlr, const u32 timing[])
-{
- u32 val;
- int loop_count;
-
- clock_enable(config->periph_id);
-
- /* Reset the usb controller */
- usbf_reset_controller(config, usbctlr);
-
- /* Stop crystal clock by setting UTMIP_PHY_XTAL_CLOCKEN low */
- clrbits_le32(&usbctlr->utmip_misc_cfg1, UTMIP_PHY_XTAL_CLOCKEN);
-
- /* Follow the crystal clock disable by >100ns delay */
- udelay(1);
-
- /*
- * To Use the A Session Valid for cable detection logic, VBUS_WAKEUP
- * mux must be switched to actually use a_sess_vld threshold.
- */
- if (fdt_gpio_isvalid(&config->vbus_gpio)) {
- clrsetbits_le32(&usbctlr->usb1_legacy_ctrl,
- VBUS_SENSE_CTL_MASK,
- VBUS_SENSE_CTL_A_SESS_VLD << VBUS_SENSE_CTL_SHIFT);
- }
-
- /*
- * PLL Delay CONFIGURATION settings. The following parameters control
- * the bring up of the plls.
- */
- val = readl(&usbctlr->utmip_misc_cfg1);
- clrsetbits_le32(&val, UTMIP_PLLU_STABLE_COUNT_MASK,
- timing[PARAM_STABLE_COUNT] << UTMIP_PLLU_STABLE_COUNT_SHIFT);
- clrsetbits_le32(&val, UTMIP_PLL_ACTIVE_DLY_COUNT_MASK,
- timing[PARAM_ACTIVE_DELAY_COUNT] <<
- UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT);
- writel(val, &usbctlr->utmip_misc_cfg1);
-
- /* Set PLL enable delay count and crystal frequency count */
- val = readl(&usbctlr->utmip_pll_cfg1);
- clrsetbits_le32(&val, UTMIP_PLLU_ENABLE_DLY_COUNT_MASK,
- timing[PARAM_ENABLE_DELAY_COUNT] <<
- UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT);
- clrsetbits_le32(&val, UTMIP_XTAL_FREQ_COUNT_MASK,
- timing[PARAM_XTAL_FREQ_COUNT] <<
- UTMIP_XTAL_FREQ_COUNT_SHIFT);
- writel(val, &usbctlr->utmip_pll_cfg1);
-
- /* Setting the tracking length time */
- clrsetbits_le32(&usbctlr->utmip_bias_cfg1,
- UTMIP_BIAS_PDTRK_COUNT_MASK,
- timing[PARAM_BIAS_TIME] << UTMIP_BIAS_PDTRK_COUNT_SHIFT);
-
- /* Program debounce time for VBUS to become valid */
- clrsetbits_le32(&usbctlr->utmip_debounce_cfg0,
- UTMIP_DEBOUNCE_CFG0_MASK,
- timing[PARAM_DEBOUNCE_A_TIME] << UTMIP_DEBOUNCE_CFG0_SHIFT);
-
- setbits_le32(&usbctlr->utmip_tx_cfg0, UTMIP_FS_PREAMBLE_J);
-
- /* Disable battery charge enabling bit */
- setbits_le32(&usbctlr->utmip_bat_chrg_cfg0, UTMIP_PD_CHRG);
-
- clrbits_le32(&usbctlr->utmip_xcvr_cfg0, UTMIP_XCVR_LSBIAS_SE);
- setbits_le32(&usbctlr->utmip_spare_cfg0, FUSE_SETUP_SEL);
-
- /*
- * Configure the UTMIP_IDLE_WAIT and UTMIP_ELASTIC_LIMIT
- * Setting these fields, together with default values of the
- * other fields, results in programming the registers below as
- * follows:
- * UTMIP_HSRX_CFG0 = 0x9168c000
- * UTMIP_HSRX_CFG1 = 0x13
- */
-
- /* Set PLL enable delay count and Crystal frequency count */
- val = readl(&usbctlr->utmip_hsrx_cfg0);
- clrsetbits_le32(&val, UTMIP_IDLE_WAIT_MASK,
- utmip_idle_wait_delay << UTMIP_IDLE_WAIT_SHIFT);
- clrsetbits_le32(&val, UTMIP_ELASTIC_LIMIT_MASK,
- utmip_elastic_limit << UTMIP_ELASTIC_LIMIT_SHIFT);
- writel(val, &usbctlr->utmip_hsrx_cfg0);
-
- /* Configure the UTMIP_HS_SYNC_START_DLY */
- clrsetbits_le32(&usbctlr->utmip_hsrx_cfg1,
- UTMIP_HS_SYNC_START_DLY_MASK,
- utmip_hs_sync_start_delay << UTMIP_HS_SYNC_START_DLY_SHIFT);
-
- /* Preceed the crystal clock disable by >100ns delay. */
- udelay(1);
-
- /* Resuscitate crystal clock by setting UTMIP_PHY_XTAL_CLOCKEN */
- setbits_le32(&usbctlr->utmip_misc_cfg1, UTMIP_PHY_XTAL_CLOCKEN);
-
- /* Finished the per-controller init. */
-
- /* De-assert UTMIP_RESET to bring out of reset. */
- clrbits_le32(&usbctlr->susp_ctrl, UTMIP_RESET);
-
- /* Wait for the phy clock to become valid in 100 ms */
- for (loop_count = 100000; loop_count != 0; loop_count--) {
- if (readl(&usbctlr->susp_ctrl) & USB_PHY_CLK_VALID)
- break;
- udelay(1);
- }
- if (!loop_count)
- return -1;
-
- /* Disable ICUSB FS/LS transceiver */
- clrbits_le32(&usbctlr->icusb_ctrl, IC_ENB1);
-
- /* Select UTMI parallel interface */
- clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK,
- PTS_UTMI << PTS_SHIFT);
- clrbits_le32(&usbctlr->port_sc1, STS);
-
- /* Deassert power down state */
- clrbits_le32(&usbctlr->utmip_xcvr_cfg0, UTMIP_FORCE_PD_POWERDOWN |
- UTMIP_FORCE_PD2_POWERDOWN | UTMIP_FORCE_PDZI_POWERDOWN);
- clrbits_le32(&usbctlr->utmip_xcvr_cfg1, UTMIP_FORCE_PDDISC_POWERDOWN |
- UTMIP_FORCE_PDCHRP_POWERDOWN | UTMIP_FORCE_PDDR_POWERDOWN);
-
- return 0;
-}
-
-#ifdef CONFIG_USB_ULPI
-/* if board file does not set a ULPI reference frequency we default to 24MHz */
-#ifndef CONFIG_ULPI_REF_CLK
-#define CONFIG_ULPI_REF_CLK 24000000
-#endif
-
-/* set up the ULPI USB controller with the parameters provided */
-static int init_ulpi_usb_controller(struct fdt_usb *config,
- struct usb_ctlr *usbctlr)
-{
- u32 val;
- int loop_count;
- struct ulpi_viewport ulpi_vp;
-
- /* set up ULPI reference clock on pllp_out4 */
- clock_enable(PERIPH_ID_DEV2_OUT);
- clock_set_pllout(CLOCK_ID_PERIPH, PLL_OUT4, CONFIG_ULPI_REF_CLK);
-
- /* reset ULPI phy */
- if (fdt_gpio_isvalid(&config->phy_reset_gpio)) {
- fdtdec_setup_gpio(&config->phy_reset_gpio);
- gpio_direction_output(config->phy_reset_gpio.gpio, 0);
- mdelay(5);
- gpio_set_value(config->phy_reset_gpio.gpio, 1);
- }
-
- /* Reset the usb controller */
- clock_enable(config->periph_id);
- usbf_reset_controller(config, usbctlr);
-
- /* enable pinmux bypass */
- setbits_le32(&usbctlr->ulpi_timing_ctrl_0,
- ULPI_CLKOUT_PINMUX_BYP | ULPI_OUTPUT_PINMUX_BYP);
-
- /* Select ULPI parallel interface */
- clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK, PTS_ULPI << PTS_SHIFT);
-
- /* enable ULPI transceiver */
- setbits_le32(&usbctlr->susp_ctrl, ULPI_PHY_ENB);
-
- /* configure ULPI transceiver timings */
- val = 0;
- writel(val, &usbctlr->ulpi_timing_ctrl_1);
-
- val |= ULPI_DATA_TRIMMER_SEL(4);
- val |= ULPI_STPDIRNXT_TRIMMER_SEL(4);
- val |= ULPI_DIR_TRIMMER_SEL(4);
- writel(val, &usbctlr->ulpi_timing_ctrl_1);
- udelay(10);
-
- val |= ULPI_DATA_TRIMMER_LOAD;
- val |= ULPI_STPDIRNXT_TRIMMER_LOAD;
- val |= ULPI_DIR_TRIMMER_LOAD;
- writel(val, &usbctlr->ulpi_timing_ctrl_1);
-
- /* set up phy for host operation with external vbus supply */
- ulpi_vp.port_num = 0;
- ulpi_vp.viewport_addr = (u32)&usbctlr->ulpi_viewport;
-
- if (ulpi_init(&ulpi_vp)) {
- printf("Tegra ULPI viewport init failed\n");
- return -1;
- }
-
- ulpi_set_vbus(&ulpi_vp, 1, 1);
- ulpi_set_vbus_indicator(&ulpi_vp, 1, 1, 0);
-
- /* enable wakeup events */
- setbits_le32(&usbctlr->port_sc1, WKCN | WKDS | WKOC);
-
- /* Enable and wait for the phy clock to become valid in 100 ms */
- setbits_le32(&usbctlr->susp_ctrl, USB_SUSP_CLR);
- for (loop_count = 100000; loop_count != 0; loop_count--) {
- if (readl(&usbctlr->susp_ctrl) & USB_PHY_CLK_VALID)
- break;
- udelay(1);
- }
- if (!loop_count)
- return -1;
- clrbits_le32(&usbctlr->susp_ctrl, USB_SUSP_CLR);
-
- return 0;
-}
-#else
-static int init_ulpi_usb_controller(struct fdt_usb *config,
- struct usb_ctlr *usbctlr)
-{
- printf("No code to set up ULPI controller, please enable"
- "CONFIG_USB_ULPI and CONFIG_USB_ULPI_VIEWPORT");
- return -1;
-}
-#endif
-
-static void config_clock(const u32 timing[])
-{
- clock_start_pll(CLOCK_ID_USB,
- timing[PARAM_DIVM], timing[PARAM_DIVN], timing[PARAM_DIVP],
- timing[PARAM_CPCON], timing[PARAM_LFCON]);
-}
-
-/**
- * Add a new USB port to the list of available ports.
- *
- * @param config USB port configuration
- * @return 0 if ok, -1 if error (too many ports)
- */
-static int add_port(struct fdt_usb *config, const u32 timing[])
-{
- struct usb_ctlr *usbctlr = config->reg;
-
- if (port_count == USB_PORTS_MAX) {
- printf("tegrausb: Cannot register more than %d ports\n",
- USB_PORTS_MAX);
- return -1;
- }
-
- if (config->utmi && init_utmi_usb_controller(config, usbctlr, timing)) {
- printf("tegrausb: Cannot init port\n");
- return -1;
- }
-
- if (config->ulpi && init_ulpi_usb_controller(config, usbctlr)) {
- printf("tegrausb: Cannot init port\n");
- return -1;
- }
-
- port[port_count++] = *config;
-
- return 0;
-}
-
-int tegrausb_start_port(int portnum, u32 *hccr, u32 *hcor)
-{
- struct usb_ctlr *usbctlr;
-
- if (portnum >= port_count)
- return -1;
- set_host_mode(&port[portnum]);
-
- usbctlr = port[portnum].reg;
- *hccr = (u32)&usbctlr->cap_length;
- *hcor = (u32)&usbctlr->usb_cmd;
- return 0;
-}
-
-int tegrausb_stop_port(int portnum)
-{
- struct usb_ctlr *usbctlr;
-
- usbctlr = port[portnum].reg;
-
- /* Stop controller */
- writel(0, &usbctlr->usb_cmd);
- udelay(1000);
-
- /* Initiate controller reset */
- writel(2, &usbctlr->usb_cmd);
- udelay(1000);
-
- return 0;
-}
-
-int fdt_decode_usb(const void *blob, int node, unsigned osc_frequency_mhz,
- struct fdt_usb *config)
-{
- const char *phy, *mode;
-
- config->reg = (struct usb_ctlr *)fdtdec_get_addr(blob, node, "reg");
- mode = fdt_getprop(blob, node, "dr_mode", NULL);
- if (mode) {
- if (0 == strcmp(mode, "host"))
- config->dr_mode = DR_MODE_HOST;
- else if (0 == strcmp(mode, "peripheral"))
- config->dr_mode = DR_MODE_DEVICE;
- else if (0 == strcmp(mode, "otg"))
- config->dr_mode = DR_MODE_OTG;
- else {
- debug("%s: Cannot decode dr_mode '%s'\n", __func__,
- mode);
- return -FDT_ERR_NOTFOUND;
- }
- } else {
- config->dr_mode = DR_MODE_HOST;
- }
-
- phy = fdt_getprop(blob, node, "phy_type", NULL);
- config->utmi = phy && 0 == strcmp("utmi", phy);
- config->ulpi = phy && 0 == strcmp("ulpi", phy);
- config->enabled = fdtdec_get_is_enabled(blob, node);
- config->has_legacy_mode = fdtdec_get_bool(blob, node,
- "nvidia,has-legacy-mode");
- config->periph_id = clock_decode_periph_id(blob, node);
- if (config->periph_id == PERIPH_ID_NONE) {
- debug("%s: Missing/invalid peripheral ID\n", __func__);
- return -FDT_ERR_NOTFOUND;
- }
- fdtdec_decode_gpio(blob, node, "nvidia,vbus-gpio", &config->vbus_gpio);
- fdtdec_decode_gpio(blob, node, "nvidia,phy-reset-gpio",
- &config->phy_reset_gpio);
- debug("enabled=%d, legacy_mode=%d, utmi=%d, ulpi=%d, periph_id=%d, "
- "vbus=%d, phy_reset=%d, dr_mode=%d\n",
- config->enabled, config->has_legacy_mode, config->utmi,
- config->ulpi, config->periph_id, config->vbus_gpio.gpio,
- config->phy_reset_gpio.gpio, config->dr_mode);
-
- return 0;
-}
-
-int board_usb_init(const void *blob)
-{
- struct fdt_usb config;
- unsigned osc_freq = clock_get_rate(CLOCK_ID_OSC);
- enum clock_osc_freq freq;
- int node_list[USB_PORTS_MAX];
- int node, count, i;
-
- /* Set up the USB clocks correctly based on our oscillator frequency */
- freq = clock_get_osc_freq();
- config_clock(usb_pll[freq]);
-
- /* count may return <0 on error */
- count = fdtdec_find_aliases_for_id(blob, "usb",
- COMPAT_NVIDIA_TEGRA20_USB, node_list, USB_PORTS_MAX);
- for (i = 0; i < count; i++) {
- debug("USB %d: ", i);
- node = node_list[i];
- if (!node)
- continue;
- if (fdt_decode_usb(blob, node, osc_freq, &config)) {
- debug("Cannot decode USB node %s\n",
- fdt_get_name(blob, node, NULL));
- return -1;
- }
-
- if (add_port(&config, usb_pll[freq]))
- return -1;
- set_host_mode(&config);
- }
-
- return 0;
-}
diff --git a/arch/arm/cpu/armv7/zynq/Makefile b/arch/arm/cpu/armv7/zynq/Makefile
index 499ace4..388085d 100644
--- a/arch/arm/cpu/armv7/zynq/Makefile
+++ b/arch/arm/cpu/armv7/zynq/Makefile
@@ -30,6 +30,7 @@ LIB = $(obj)lib$(SOC).o
COBJS-y := timer.o
COBJS-y += cpu.o
+COBJS-y += slcr.o
COBJS := $(COBJS-y)
diff --git a/arch/arm/cpu/armv7/zynq/cpu.c b/arch/arm/cpu/armv7/zynq/cpu.c
index ab615cc..e8f4c19 100644
--- a/arch/arm/cpu/armv7/zynq/cpu.c
+++ b/arch/arm/cpu/armv7/zynq/cpu.c
@@ -21,11 +21,37 @@
* MA 02111-1307 USA
*/
#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware.h>
-inline void lowlevel_init(void) {}
+void lowlevel_init(void)
+{
+ zynq_slcr_unlock();
+ /* remap DDR to zero, FILTERSTART */
+ writel(0, &scu_base->filter_start);
+
+ /* Device config APB, unlock the PCAP */
+ writel(0x757BDF0D, &devcfg_base->unlock);
+ writel(0xFFFFFFFF, &devcfg_base->rom_shadow);
+
+ /* OCM_CFG, Mask out the ROM, map ram into upper addresses */
+ writel(0x1F, &slcr_base->ocm_cfg);
+ /* FPGA_RST_CTRL, clear resets on AXI fabric ports */
+ writel(0x0, &slcr_base->fpga_rst_ctrl);
+ /* TZ_DDR_RAM, Set DDR trust zone non-secure */
+ writel(0xFFFFFFFF, &slcr_base->trust_zone);
+ /* Set urgent bits with register */
+ writel(0x0, &slcr_base->ddr_urgent_sel);
+ /* Urgent write, ports S2/S3 */
+ writel(0xC, &slcr_base->ddr_urgent);
+
+ zynq_slcr_lock();
+}
void reset_cpu(ulong addr)
{
+ zynq_slcr_cpu_reset();
while (1)
;
}
diff --git a/arch/arm/cpu/armv7/zynq/slcr.c b/arch/arm/cpu/armv7/zynq/slcr.c
new file mode 100644
index 0000000..788a8fd
--- /dev/null
+++ b/arch/arm/cpu/armv7/zynq/slcr.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2013 Xilinx Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <malloc.h>
+#include <asm/arch/hardware.h>
+
+#define SLCR_LOCK_MAGIC 0x767B
+#define SLCR_UNLOCK_MAGIC 0xDF0D
+
+static int slcr_lock = 1; /* 1 means locked, 0 means unlocked */
+
+void zynq_slcr_lock(void)
+{
+ if (!slcr_lock)
+ writel(SLCR_LOCK_MAGIC, &slcr_base->slcr_lock);
+}
+
+void zynq_slcr_unlock(void)
+{
+ if (slcr_lock)
+ writel(SLCR_UNLOCK_MAGIC, &slcr_base->slcr_unlock);
+}
+
+/* Reset the entire system */
+void zynq_slcr_cpu_reset(void)
+{
+ /*
+ * Unlock the SLCR then reset the system.
+ * Note that this seems to require raw i/o
+ * functions or there's a lockup?
+ */
+ zynq_slcr_unlock();
+
+ /*
+ * Clear 0x0F000000 bits of reboot status register to workaround
+ * the FSBL not loading the bitstream after soft-reboot
+ * This is a temporary solution until we know more.
+ */
+ clrbits_le32(&slcr_base->reboot_status, 0xF000000);
+
+ writel(1, &slcr_base->pss_rst_ctrl);
+}
diff --git a/arch/arm/cpu/ixp/u-boot.lds b/arch/arm/cpu/ixp/u-boot.lds
index 2c823e1..8345b55 100644
--- a/arch/arm/cpu/ixp/u-boot.lds
+++ b/arch/arm/cpu/ixp/u-boot.lds
@@ -49,7 +49,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = ALIGN(4);
@@ -67,11 +67,17 @@ SECTIONS
_end = .;
- .bss __rel_dyn_start (OVERLAY) : {
- __bss_start = .;
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ }
+
+ .bss __bss_start (OVERLAY) : {
*(.bss*)
. = ALIGN(4);
- __bss_end = .;
+ __bss_end = .;
+ }
+ .bss_end __bss_end (OVERLAY) : {
+ KEEP(*(__bss_end));
}
/DISCARD/ : { *(.dynstr*) }
diff --git a/arch/arm/cpu/tegra114-common/pinmux.c b/arch/arm/cpu/tegra114-common/pinmux.c
index 52b3ec4..4983a05 100644
--- a/arch/arm/cpu/tegra114-common/pinmux.c
+++ b/arch/arm/cpu/tegra114-common/pinmux.c
@@ -37,6 +37,20 @@ struct tegra_pingroup_desc {
#define PMUX_OD_SHIFT 6
#define PMUX_LOCK_SHIFT 7
#define PMUX_IO_RESET_SHIFT 8
+#define PMUX_RCV_SEL_SHIFT 9
+
+#define PGRP_HSM_SHIFT 2
+#define PGRP_SCHMT_SHIFT 3
+#define PGRP_LPMD_SHIFT 4
+#define PGRP_LPMD_MASK (3 << PGRP_LPMD_SHIFT)
+#define PGRP_DRVDN_SHIFT 12
+#define PGRP_DRVDN_MASK (0x7F << PGRP_DRVDN_SHIFT)
+#define PGRP_DRVUP_SHIFT 20
+#define PGRP_DRVUP_MASK (0x7F << PGRP_DRVUP_SHIFT)
+#define PGRP_SLWR_SHIFT 28
+#define PGRP_SLWR_MASK (3 << PGRP_SLWR_SHIFT)
+#define PGRP_SLWF_SHIFT 30
+#define PGRP_SLWF_MASK (3 << PGRP_SLWF_SHIFT)
/* Convenient macro for defining pin group properties */
#define PIN(pg_name, vdd, f0, f1, f2, f3, iod) \
@@ -58,6 +72,10 @@ struct tegra_pingroup_desc {
#define PINO(pg_name, vdd, f0, f1, f2, f3) \
PIN(pg_name, vdd, f0, f1, f2, f3, OUTPUT)
+/* A pin group number which is not used */
+#define PIN_RESERVED \
+ PIN(NONE, NONE, INVALID, INVALID, INVALID, INVALID, NONE)
+
const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = {
/* NAME VDD f0 f1 f2 f3 */
PINI(ULPI_DATA0, BB, SPI3, HSI, UARTA, ULPI),
@@ -84,71 +102,71 @@ const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = {
PINI(SDMMC1_DAT2, SDMMC1, SDMMC1, PWM0, SPI4, UARTA),
PINI(SDMMC1_DAT1, SDMMC1, SDMMC1, PWM1, SPI4, UARTA),
PINI(SDMMC1_DAT0, SDMMC1, SDMMC1, RSVD2, SPI4, UARTA),
- PINI(GPIO_PV2, BB, RSVD1, RSVD2, RSVD3, RSVD4),
- PINI(GPIO_PV3, BB, RSVD1, RSVD2, RSVD3, RSVD4),
+ PIN_RESERVED, /* Reserved by t114: 0x3060 - 0x3064 */
+ PIN_RESERVED,
PINI(CLK2_OUT, SDMMC1, EXTPERIPH2, RSVD2, RSVD3, RSVD4),
PINI(CLK2_REQ, SDMMC1, DAP, RSVD2, RSVD3, RSVD4),
- PINO(LCD_PWR1, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_PWR2, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_SDIN, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_SDOUT, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_WR_N, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_CS0_N, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_DC0, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_SCK, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_PWR0, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_PCLK, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_DE, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_HSYNC, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_VSYNC, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_D0, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_D1, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_D2, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_D3, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_D4, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_D5, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_D6, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_D7, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_D8, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_D9, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_D10, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_D11, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_D12, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_D13, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_D14, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_D15, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_D16, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_D17, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_D18, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_D19, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_D20, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_D21, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_D22, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_D23, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_CS1_N, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_M1, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINO(LCD_DC1, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PIN_RESERVED, /* Reserved by t114: 0x3070 - 0x310c */
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
PINI(HDMI_INT, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
PINI(DDC_SCL, LCD, I2C4, RSVD2, RSVD3, RSVD4),
PINI(DDC_SDA, LCD, I2C4, RSVD2, RSVD3, RSVD4),
- PINI(CRT_HSYNC, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINI(CRT_VSYNC, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
- PINI(VI_D0, VI, RSVD1, RSVD2, RSVD3, RSVD4),
- PINI(VI_D1, VI, RSVD1, RSVD2, RSVD3, RSVD4),
- PINI(VI_D2, VI, RSVD1, RSVD2, RSVD3, RSVD4),
- PINI(VI_D3, VI, RSVD1, RSVD2, RSVD3, RSVD4),
- PINI(VI_D4, VI, RSVD1, RSVD2, RSVD3, RSVD4),
- PINI(VI_D5, VI, RSVD1, RSVD2, RSVD3, RSVD4),
- PINI(VI_D6, VI, RSVD1, RSVD2, RSVD3, RSVD4),
- PINI(VI_D7, VI, RSVD1, RSVD2, RSVD3, RSVD4),
- PINI(VI_D8, VI, RSVD1, RSVD2, RSVD3, RSVD4),
- PINI(VI_D9, VI, RSVD1, RSVD2, RSVD3, RSVD4),
- PINI(VI_D10, VI, RSVD1, RSVD2, RSVD3, RSVD4),
- PINI(VI_D11, VI, RSVD1, RSVD2, RSVD3, RSVD4),
- PINI(VI_PCLK, VI, RSVD1, RSVD2, RSVD3, RSVD4),
- PINI(VI_MCLK, VI, RSVD1, RSVD3, RSVD3, RSVD4),
- PINI(VI_VSYNC, VI, RSVD1, RSVD2, RSVD3, RSVD4),
- PINI(VI_HSYNC, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PIN_RESERVED, /* Reserved by t114: 0x311c - 0x3160 */
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
PINI(UART2_RXD, UART, UARTB, SPDIF, UARTA, SPI4),
PINI(UART2_TXD, UART, UARTB, SPDIF, UARTA, SPI4),
PINI(UART2_RTS_N, UART, UARTA, UARTB, RSVD3, SPI4),
@@ -220,8 +238,8 @@ const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = {
PINI(SDMMC4_DAT5, SDMMC4, SDMMC4, SPI3, GMI, RSVD4),
PINI(SDMMC4_DAT6, SDMMC4, SDMMC4, SPI3, GMI, RSVD4),
PINI(SDMMC4_DAT7, SDMMC4, SDMMC4, RSVD2, GMI, RSVD4),
- PINI(SDMMC4_RST_N, SDMMC4, RSVD1, RSVD2, RSVD3, SDMMC4),
- PINI(CAM_MCLK, CAM, VI, VI_ALT1, VI_ALT2, RSVD4),
+ PIN_RESERVED, /* Reserved by t114: 0x3280 */
+ PINI(CAM_MCLK, CAM, VI, VI_ALT1, VI_ALT3, RSVD4),
PINI(GPIO_PCC1, CAM, I2S4, RSVD2, RSVD3, RSVD4),
PINI(GPIO_PBB0, CAM, I2S4, VI, VI_ALT1, VI_ALT3),
PINI(CAM_I2C_SCL, CAM, VGP1, I2C3, RSVD3, RSVD4),
@@ -246,11 +264,11 @@ const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = {
PINI(KB_ROW8, SYS, KBC, RSVD2, RSVD3, UARTA),
PINI(KB_ROW9, SYS, KBC, RSVD2, RSVD3, UARTA),
PINI(KB_ROW10, SYS, KBC, RSVD2, RSVD3, UARTA),
- PINI(KB_ROW11, SYS, RSVD1, RSVD2, RSVD3, RSVD4),
- PINI(KB_ROW12, SYS, RSVD1, RSVD2, RSVD3, RSVD4),
- PINI(KB_ROW13, SYS, RSVD1, RSVD2, RSVD3, RSVD4),
- PINI(KB_ROW14, SYS, RSVD1, RSVD2, RSVD3, RSVD4),
- PINI(KB_ROW15, SYS, RSVD1, RSVD2, RSVD3, RSVD4),
+ PIN_RESERVED, /* Reserved by t114: 0x32e8 - 0x32f8 */
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
PINI(KB_COL0, SYS, KBC, USB, SPI2, EMC_DLL),
PINI(KB_COL1, SYS, KBC, RSVD2, SPI2, EMC_DLL),
PINI(KB_COL2, SYS, KBC, RSVD2, SPI2, RSVD4),
@@ -278,36 +296,46 @@ const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = {
PINI(DAP2_DIN, AUDIO, I2S1, HDA, RSVD3, RSVD4),
PINI(DAP2_DOUT, AUDIO, I2S1, HDA, RSVD3, RSVD4),
PINI(DAP2_SCLK, AUDIO, I2S1, HDA, RSVD3, RSVD4),
- PINI(SPI2_MOSI, AUDIO, SPI6, CLDVFS, RSVD3, RSVD4),
- PINI(SPI2_MISO, AUDIO, SPI6, RSVD2, RSVD3, RSVD4),
- PINI(SPI2_CS0_N, AUDIO, SPI6, SPI1, RSVD3, RSVD4),
- PINI(SPI2_SCK, AUDIO, SPI6, CLDVFS, RSVD3, RSVD4),
- PINI(SPI1_MOSI, AUDIO, RSVD1, SPI1, SPI2, DAP2),
- PINI(SPI1_SCK, AUDIO, RSVD1, SPI1, SPI2, RSVD4),
- PINI(SPI1_CS0_N, AUDIO, SPI6, SPI1, SPI2, RSVD4),
- PINI(SPI1_MISO, AUDIO, RSVD1, SPI1, SPI2, RSVD4),
- PINI(SPI2_CS1_N, AUDIO, RSVD1, RSVD2, RSVD3, RSVD4),
- PINI(SPI2_CS2_N, AUDIO, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(DVFS_PWM, AUDIO, SPI6, CLDVFS, RSVD3, RSVD4),
+ PINI(GPIO_X1_AUD, AUDIO, SPI6, RSVD2, RSVD3, RSVD4),
+ PINI(GPIO_X3_AUD, AUDIO, SPI6, SPI1, RSVD3, RSVD4),
+ PINI(DVFS_CLK, AUDIO, SPI6, CLDVFS, RSVD3, RSVD4),
+ PINI(GPIO_X4_AUD, AUDIO, RSVD1, SPI1, SPI2, DAP2),
+ PINI(GPIO_X5_AUD, AUDIO, RSVD1, SPI1, SPI2, RSVD4),
+ PINI(GPIO_X6_AUD, AUDIO, SPI6, SPI1, SPI2, RSVD4),
+ PINI(GPIO_X7_AUD, AUDIO, RSVD1, SPI1, SPI2, RSVD4),
+ PIN_RESERVED, /* Reserved by t114: 0x3388 - 0x338c */
+ PIN_RESERVED,
PINI(SDMMC3_CLK, SDMMC3, SDMMC3, RSVD2, RSVD3, SPI3),
PINI(SDMMC3_CMD, SDMMC3, SDMMC3, PWM3, UARTA, SPI3),
PINI(SDMMC3_DAT0, SDMMC3, SDMMC3, RSVD2, RSVD3, SPI3),
PINI(SDMMC3_DAT1, SDMMC3, SDMMC3, PWM2, UARTA, SPI3),
PINI(SDMMC3_DAT2, SDMMC3, SDMMC3, PWM1, DISPA, SPI3),
PINI(SDMMC3_DAT3, SDMMC3, SDMMC3, PWM0, DISPB, SPI3),
- PINI(SDMMC3_DAT4, SDMMC3, RSVD1, RSVD2, RSVD3, RSVD4),
- PINI(SDMMC3_DAT5, SDMMC3, RSVD1, RSVD2, RSVD3, RSVD4),
- PINI(SDMMC3_DAT6, SDMMC3, RSVD1, RSVD2, RSVD3, RSVD4),
- PINI(SDMMC3_DAT7, SDMMC3, RSVD1, RSVD2, RSVD3, RSVD4),
+ PIN_RESERVED, /* Reserved by t114: 0x33a8 - 0x33dc */
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN_RESERVED,
PINI(HDMI_CEC, SYS, CEC, SDMMC3, RSVD3, SOC),
PINI(SDMMC1_WP_N, SDMMC1, SDMMC1, CLK12, SPI4, UARTA),
- PINI(SDMMC3_CD_N, SDMMC3, SDMMC3, OWR, RSVD3, RSVD4),
- PINI(SPI1_CS1_N, AUDIO, SPI6, RSVD2, SPI2, I2C1),
- PINI(SPI1_CS2_N, AUDIO, SPI6, SPI1, SPI2, I2C1),
- PINI(USB_VBUS_EN0, SYS, USB, RSVD2, RSVD3, RSVD4),
- PINI(USB_VBUS_EN1, SYS, USB, RSVD2, RSVD3, RSVD4),
+ PINI(SDMMC3_CD_N, SYS, SDMMC3, OWR, RSVD3, RSVD4),
+ PINI(GPIO_W2_AUD, AUDIO, SPI6, RSVD2, SPI2, I2C1),
+ PINI(GPIO_W3_AUD, AUDIO, SPI6, SPI1, SPI2, I2C1),
+ PINI(USB_VBUS_EN0, LCD, USB, RSVD2, RSVD3, RSVD4),
+ PINI(USB_VBUS_EN1, LCD, USB, RSVD2, RSVD3, RSVD4),
PINI(SDMMC3_CLK_LB_IN, SDMMC3, SDMMC3, RSVD2, RSVD3, RSVD4),
- PINO(SDMMC3_CLK_LB_OUT, SDMMC3, SDMMC3, RSVD2, RSVD3, RSVD4),
- PINO(NAND_GMI_CLK_LB, GMI, SDMMC2, NAND, GMI, RSVD4),
+ PINI(SDMMC3_CLK_LB_OUT, SDMMC3, SDMMC3, RSVD2, RSVD3, RSVD4),
+ PIN_RESERVED, /* Reserved by t114: 0x3404 */
PINO(RESET_OUT_N, SYS, RSVD1, RSVD2, RSVD3, RESET_OUT_N),
};
@@ -484,6 +512,30 @@ static int pinmux_set_ioreset(enum pmux_pingrp pin,
return 0;
}
+static int pinmux_set_rcv_sel(enum pmux_pingrp pin,
+ enum pmux_pin_rcv_sel rcv_sel)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *pin_rcv_sel = &pmt->pmt_ctl[pin];
+ u32 reg;
+
+ /* Error check on pin and rcv_sel */
+ assert(pmux_pingrp_isvalid(pin));
+ assert(pmux_pin_rcv_sel_isvalid(rcv_sel));
+
+ if (rcv_sel == PMUX_PIN_RCV_SEL_DEFAULT)
+ return 0;
+
+ reg = readl(pin_rcv_sel);
+ reg &= ~(0x1 << PMUX_RCV_SEL_SHIFT);
+ if (rcv_sel == PMUX_PIN_RCV_SEL_HIGH)
+ reg |= (0x1 << PMUX_RCV_SEL_SHIFT);
+ writel(reg, pin_rcv_sel);
+
+ return 0;
+}
+
void pinmux_config_pingroup(struct pingroup_config *config)
{
enum pmux_pingrp pin = config->pingroup;
@@ -495,6 +547,7 @@ void pinmux_config_pingroup(struct pingroup_config *config)
pinmux_set_lock(pin, config->lock);
pinmux_set_od(pin, config->od);
pinmux_set_ioreset(pin, config->ioreset);
+ pinmux_set_rcv_sel(pin, config->rcv_sel);
}
void pinmux_config_table(struct pingroup_config *config, int len)
@@ -504,3 +557,184 @@ void pinmux_config_table(struct pingroup_config *config, int len)
for (i = 0; i < len; i++)
pinmux_config_pingroup(&config[i]);
}
+
+static int padgrp_set_drvup_slwf(enum pdrive_pingrp pad, int slwf)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *pad_slwf = &pmt->pmt_drive[pad];
+ u32 reg;
+
+ /* Error check on pad and slwf */
+ assert(pmux_padgrp_isvalid(pad));
+ assert(pmux_pad_slw_isvalid(slwf));
+
+ /* NONE means unspecified/do not change/use POR value */
+ if (slwf == PGRP_SLWF_NONE)
+ return 0;
+
+ reg = readl(pad_slwf);
+ reg &= ~PGRP_SLWF_MASK;
+ reg |= (slwf << PGRP_SLWF_SHIFT);
+ writel(reg, pad_slwf);
+
+ return 0;
+}
+
+static int padgrp_set_drvdn_slwr(enum pdrive_pingrp pad, int slwr)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *pad_slwr = &pmt->pmt_drive[pad];
+ u32 reg;
+
+ /* Error check on pad and slwr */
+ assert(pmux_padgrp_isvalid(pad));
+ assert(pmux_pad_slw_isvalid(slwr));
+
+ /* NONE means unspecified/do not change/use POR value */
+ if (slwr == PGRP_SLWR_NONE)
+ return 0;
+
+ reg = readl(pad_slwr);
+ reg &= ~PGRP_SLWR_MASK;
+ reg |= (slwr << PGRP_SLWR_SHIFT);
+ writel(reg, pad_slwr);
+
+ return 0;
+}
+
+static int padgrp_set_drvup(enum pdrive_pingrp pad, int drvup)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *pad_drvup = &pmt->pmt_drive[pad];
+ u32 reg;
+
+ /* Error check on pad and drvup */
+ assert(pmux_padgrp_isvalid(pad));
+ assert(pmux_pad_drv_isvalid(drvup));
+
+ /* NONE means unspecified/do not change/use POR value */
+ if (drvup == PGRP_DRVUP_NONE)
+ return 0;
+
+ reg = readl(pad_drvup);
+ reg &= ~PGRP_DRVUP_MASK;
+ reg |= (drvup << PGRP_DRVUP_SHIFT);
+ writel(reg, pad_drvup);
+
+ return 0;
+}
+
+static int padgrp_set_drvdn(enum pdrive_pingrp pad, int drvdn)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *pad_drvdn = &pmt->pmt_drive[pad];
+ u32 reg;
+
+ /* Error check on pad and drvdn */
+ assert(pmux_padgrp_isvalid(pad));
+ assert(pmux_pad_drv_isvalid(drvdn));
+
+ /* NONE means unspecified/do not change/use POR value */
+ if (drvdn == PGRP_DRVDN_NONE)
+ return 0;
+
+ reg = readl(pad_drvdn);
+ reg &= ~PGRP_DRVDN_MASK;
+ reg |= (drvdn << PGRP_DRVDN_SHIFT);
+ writel(reg, pad_drvdn);
+
+ return 0;
+}
+
+static int padgrp_set_lpmd(enum pdrive_pingrp pad, enum pgrp_lpmd lpmd)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *pad_lpmd = &pmt->pmt_drive[pad];
+ u32 reg;
+
+ /* Error check pad and lpmd value */
+ assert(pmux_padgrp_isvalid(pad));
+ assert(pmux_pad_lpmd_isvalid(lpmd));
+
+ /* NONE means unspecified/do not change/use POR value */
+ if (lpmd == PGRP_LPMD_NONE)
+ return 0;
+
+ reg = readl(pad_lpmd);
+ reg &= ~PGRP_LPMD_MASK;
+ reg |= (lpmd << PGRP_LPMD_SHIFT);
+ writel(reg, pad_lpmd);
+
+ return 0;
+}
+
+static int padgrp_set_schmt(enum pdrive_pingrp pad, enum pgrp_schmt schmt)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *pad_schmt = &pmt->pmt_drive[pad];
+ u32 reg;
+
+ /* Error check pad */
+ assert(pmux_padgrp_isvalid(pad));
+
+ /* NONE means unspecified/do not change/use POR value */
+ if (schmt == PGRP_SCHMT_NONE)
+ return 0;
+
+ reg = readl(pad_schmt);
+ reg &= ~(1 << PGRP_SCHMT_SHIFT);
+ if (schmt == PGRP_SCHMT_ENABLE)
+ reg |= (0x1 << PGRP_SCHMT_SHIFT);
+ writel(reg, pad_schmt);
+
+ return 0;
+}
+static int padgrp_set_hsm(enum pdrive_pingrp pad, enum pgrp_hsm hsm)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *pad_hsm = &pmt->pmt_drive[pad];
+ u32 reg;
+
+ /* Error check pad */
+ assert(pmux_padgrp_isvalid(pad));
+
+ /* NONE means unspecified/do not change/use POR value */
+ if (hsm == PGRP_HSM_NONE)
+ return 0;
+
+ reg = readl(pad_hsm);
+ reg &= ~(1 << PGRP_HSM_SHIFT);
+ if (hsm == PGRP_HSM_ENABLE)
+ reg |= (0x1 << PGRP_HSM_SHIFT);
+ writel(reg, pad_hsm);
+
+ return 0;
+}
+
+void padctrl_config_pingroup(struct padctrl_config *config)
+{
+ enum pdrive_pingrp pad = config->padgrp;
+
+ padgrp_set_drvup_slwf(pad, config->slwf);
+ padgrp_set_drvdn_slwr(pad, config->slwr);
+ padgrp_set_drvup(pad, config->drvup);
+ padgrp_set_drvdn(pad, config->drvdn);
+ padgrp_set_lpmd(pad, config->lpmd);
+ padgrp_set_schmt(pad, config->schmt);
+ padgrp_set_hsm(pad, config->hsm);
+}
+
+void padgrp_config_table(struct padctrl_config *config, int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++)
+ padctrl_config_pingroup(&config[i]);
+}
diff --git a/arch/arm/cpu/tegra30-common/pinmux.c b/arch/arm/cpu/tegra30-common/pinmux.c
index 122665f..eecf058 100644
--- a/arch/arm/cpu/tegra30-common/pinmux.c
+++ b/arch/arm/cpu/tegra30-common/pinmux.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@@ -38,6 +38,19 @@ struct tegra_pingroup_desc {
#define PMUX_LOCK_SHIFT 7
#define PMUX_IO_RESET_SHIFT 8
+#define PGRP_HSM_SHIFT 2
+#define PGRP_SCHMT_SHIFT 3
+#define PGRP_LPMD_SHIFT 4
+#define PGRP_LPMD_MASK (3 << PGRP_LPMD_SHIFT)
+#define PGRP_DRVDN_SHIFT 12
+#define PGRP_DRVDN_MASK (0x7F << PGRP_DRVDN_SHIFT)
+#define PGRP_DRVUP_SHIFT 20
+#define PGRP_DRVUP_MASK (0x7F << PGRP_DRVUP_SHIFT)
+#define PGRP_SLWR_SHIFT 28
+#define PGRP_SLWR_MASK (3 << PGRP_SLWR_SHIFT)
+#define PGRP_SLWF_SHIFT 30
+#define PGRP_SLWF_MASK (3 << PGRP_SLWF_SHIFT)
+
/* Convenient macro for defining pin group properties */
#define PIN(pg_name, vdd, f0, f1, f2, f3, iod) \
{ \
@@ -504,3 +517,178 @@ void pinmux_config_table(struct pingroup_config *config, int len)
for (i = 0; i < len; i++)
pinmux_config_pingroup(&config[i]);
}
+
+static int padgrp_set_drvup_slwf(enum pdrive_pingrp pad,
+ int slwf)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *pad_slwf = &pmt->pmt_drive[pad];
+ u32 reg;
+
+ /* Error check on pad and slwf */
+ assert(pmux_padgrp_isvalid(pad));
+ assert(pmux_pad_slw_isvalid(slwf));
+
+ /* NONE means unspecified/do not change/use POR value */
+ if (slwf == PGRP_SLWF_NONE)
+ return 0;
+
+ reg = readl(pad_slwf);
+ reg &= ~PGRP_SLWF_MASK;
+ reg |= (slwf << PGRP_SLWF_SHIFT);
+ writel(reg, pad_slwf);
+
+ return 0;
+}
+
+static int padgrp_set_drvdn_slwr(enum pdrive_pingrp pad, int slwr)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *pad_slwr = &pmt->pmt_drive[pad];
+ u32 reg;
+
+ /* Error check on pad and slwr */
+ assert(pmux_padgrp_isvalid(pad));
+ assert(pmux_pad_slw_isvalid(slwr));
+
+ /* NONE means unspecified/do not change/use POR value */
+ if (slwr == PGRP_SLWR_NONE)
+ return 0;
+
+ reg = readl(pad_slwr);
+ reg &= ~PGRP_SLWR_MASK;
+ reg |= (slwr << PGRP_SLWR_SHIFT);
+ writel(reg, pad_slwr);
+
+ return 0;
+}
+
+static int padgrp_set_drvup(enum pdrive_pingrp pad, int drvup)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *pad_drvup = &pmt->pmt_drive[pad];
+ u32 reg;
+
+ /* Error check on pad and drvup */
+ assert(pmux_padgrp_isvalid(pad));
+ assert(pmux_pad_drv_isvalid(drvup));
+
+ /* NONE means unspecified/do not change/use POR value */
+ if (drvup == PGRP_DRVUP_NONE)
+ return 0;
+
+ reg = readl(pad_drvup);
+ reg &= ~PGRP_DRVUP_MASK;
+ reg |= (drvup << PGRP_DRVUP_SHIFT);
+ writel(reg, pad_drvup);
+
+ return 0;
+}
+
+static int padgrp_set_drvdn(enum pdrive_pingrp pad, int drvdn)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *pad_drvdn = &pmt->pmt_drive[pad];
+ u32 reg;
+
+ /* Error check on pad and drvdn */
+ assert(pmux_padgrp_isvalid(pad));
+ assert(pmux_pad_drv_isvalid(drvdn));
+
+ /* NONE means unspecified/do not change/use POR value */
+ if (drvdn == PGRP_DRVDN_NONE)
+ return 0;
+
+ reg = readl(pad_drvdn);
+ reg &= ~PGRP_DRVDN_MASK;
+ reg |= (drvdn << PGRP_DRVDN_SHIFT);
+ writel(reg, pad_drvdn);
+
+ return 0;
+}
+
+static int padgrp_set_lpmd(enum pdrive_pingrp pad, enum pgrp_lpmd lpmd)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *pad_lpmd = &pmt->pmt_drive[pad];
+ u32 reg;
+
+ /* Error check pad and lpmd value */
+ assert(pmux_padgrp_isvalid(pad));
+ assert(pmux_pad_lpmd_isvalid(lpmd));
+
+ /* NONE means unspecified/do not change/use POR value */
+ if (lpmd == PGRP_LPMD_NONE)
+ return 0;
+
+ reg = readl(pad_lpmd);
+ reg &= ~PGRP_LPMD_MASK;
+ reg |= (lpmd << PGRP_LPMD_SHIFT);
+ writel(reg, pad_lpmd);
+
+ return 0;
+}
+
+static int padgrp_set_schmt(enum pdrive_pingrp pad, enum pgrp_schmt schmt)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *pad_schmt = &pmt->pmt_drive[pad];
+ u32 reg;
+
+ /* Error check pad */
+ assert(pmux_padgrp_isvalid(pad));
+
+ reg = readl(pad_schmt);
+ reg &= ~(1 << PGRP_SCHMT_SHIFT);
+ if (schmt == PGRP_SCHMT_ENABLE)
+ reg |= (0x1 << PGRP_SCHMT_SHIFT);
+ writel(reg, pad_schmt);
+
+ return 0;
+}
+static int padgrp_set_hsm(enum pdrive_pingrp pad,
+ enum pgrp_hsm hsm)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *pad_hsm = &pmt->pmt_drive[pad];
+ u32 reg;
+
+ /* Error check pad */
+ assert(pmux_padgrp_isvalid(pad));
+
+ reg = readl(pad_hsm);
+ reg &= ~(1 << PGRP_HSM_SHIFT);
+ if (hsm == PGRP_HSM_ENABLE)
+ reg |= (0x1 << PGRP_HSM_SHIFT);
+ writel(reg, pad_hsm);
+
+ return 0;
+}
+
+void padctrl_config_pingroup(struct padctrl_config *config)
+{
+ enum pdrive_pingrp pad = config->padgrp;
+
+ padgrp_set_drvup_slwf(pad, config->slwf);
+ padgrp_set_drvdn_slwr(pad, config->slwr);
+ padgrp_set_drvup(pad, config->drvup);
+ padgrp_set_drvdn(pad, config->drvdn);
+ padgrp_set_lpmd(pad, config->lpmd);
+ padgrp_set_schmt(pad, config->schmt);
+ padgrp_set_hsm(pad, config->hsm);
+}
+
+void padgrp_config_table(struct padctrl_config *config, int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++)
+ padctrl_config_pingroup(&config[i]);
+}
diff --git a/arch/arm/cpu/u-boot-spl.lds b/arch/arm/cpu/u-boot-spl.lds
new file mode 100644
index 0000000..3c0d99ca
--- /dev/null
+++ b/arch/arm/cpu/u-boot-spl.lds
@@ -0,0 +1,93 @@
+/*
+ * Copyright (c) 2004-2008 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ __image_copy_start = .;
+ CPUDIR/start.o (.text*)
+ *(.text*)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+ . = ALIGN(4);
+ .data : {
+ *(.data*)
+ }
+
+ . = ALIGN(4);
+
+ . = .;
+
+ __image_copy_end = .;
+
+ .rel.dyn : {
+ __rel_dyn_start = .;
+ *(.rel*)
+ __rel_dyn_end = .;
+ }
+
+ .dynsym : {
+ __dynsym_start = .;
+ *(.dynsym)
+ }
+
+ _end = .;
+
+ /*
+ * Deprecated: this MMU section is used by pxa at present but
+ * should not be used by new boards/CPUs.
+ */
+ . = ALIGN(4096);
+ .mmutable : {
+ *(.mmutable)
+ }
+
+ .bss __rel_dyn_start (OVERLAY) : {
+ __bss_start = .;
+ *(.bss*)
+ . = ALIGN(4);
+ __bss_end = .;
+ }
+
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
+}
+
+#if defined(CONFIG_SPL_TEXT_BASE) && defined(CONFIG_SPL_MAX_SIZE)
+ASSERT(__bss_end < (CONFIG_SPL_TEXT_BASE + CONFIG_SPL_MAX_SIZE), "SPL image too big");
+#endif
diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds
index b337e7b..3a1083d 100644
--- a/arch/arm/cpu/u-boot.lds
+++ b/arch/arm/cpu/u-boot.lds
@@ -52,7 +52,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = ALIGN(4);
@@ -81,11 +81,18 @@ SECTIONS
*(.mmutable)
}
- .bss __rel_dyn_start (OVERLAY) : {
- __bss_start = .;
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ }
+
+ .bss __bss_start (OVERLAY) : {
*(.bss*)
. = ALIGN(4);
- __bss_end = .;
+ __bss_end = .;
+ }
+
+ .bss_end __bss_end (OVERLAY) : {
+ KEEP(*(__bss_end));
}
/DISCARD/ : { *(.dynstr*) }
diff --git a/arch/arm/dts/tegra114.dtsi b/arch/arm/dts/tegra114.dtsi
index d06cd12..701c0f9 100644
--- a/arch/arm/dts/tegra114.dtsi
+++ b/arch/arm/dts/tegra114.dtsi
@@ -1,5 +1,78 @@
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
/ {
compatible = "nvidia,tegra114";
+
+ tegra_car: clock {
+ compatible = "nvidia,tegra114-car";
+ reg = <0x60006000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ gpio: gpio {
+ compatible = "nvidia,tegra114-gpio", "nvidia,tegra30-gpio";
+ reg = <0x6000d000 0x1000>;
+ interrupts = <0 32 0x04
+ 0 33 0x04
+ 0 34 0x04
+ 0 35 0x04
+ 0 55 0x04
+ 0 87 0x04
+ 0 89 0x04
+ 0 125 0x04>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ i2c@7000c000 {
+ compatible = "nvidia,tegra114-i2c";
+ reg = <0x7000c000 0x100>;
+ interrupts = <0 38 0x04>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car 12>;
+ status = "disabled";
+ };
+
+ i2c@7000c400 {
+ compatible = "nvidia,tegra114-i2c";
+ reg = <0x7000c400 0x100>;
+ interrupts = <0 84 0x04>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car 54>;
+ status = "disabled";
+ };
+
+ i2c@7000c500 {
+ compatible = "nvidia,tegra114-i2c";
+ reg = <0x7000c500 0x100>;
+ interrupts = <0 92 0x04>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car 67>;
+ status = "disabled";
+ };
+
+ i2c@7000c700 {
+ compatible = "nvidia,tegra114-i2c";
+ reg = <0x7000c700 0x100>;
+ interrupts = <0 120 0x04>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car 103>;
+ status = "disabled";
+ };
+
+ i2c@7000d000 {
+ compatible = "nvidia,tegra114-i2c";
+ reg = <0x7000d000 0x100>;
+ interrupts = <0 53 0x04>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car 47>;
+ status = "disabled";
+ };
};
diff --git a/arch/arm/dts/tegra20.dtsi b/arch/arm/dts/tegra20.dtsi
index 9a89685..3805750 100644
--- a/arch/arm/dts/tegra20.dtsi
+++ b/arch/arm/dts/tegra20.dtsi
@@ -1,4 +1,4 @@
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
/ {
compatible = "nvidia,tegra20";
@@ -318,24 +318,32 @@
sdhci@c8000000 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000000 0x200>;
- interrupts = < 46 >;
+ interrupts = <0 14 0x04>;
+ clocks = <&tegra_car 14>;
+ status = "disabled";
};
sdhci@c8000200 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000200 0x200>;
- interrupts = < 47 >;
+ interrupts = <0 15 0x04>;
+ clocks = <&tegra_car 9>;
+ status = "disabled";
};
sdhci@c8000400 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000400 0x200>;
- interrupts = < 51 >;
+ interrupts = <0 19 0x04>;
+ clocks = <&tegra_car 69>;
+ status = "disabled";
};
sdhci@c8000600 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000600 0x200>;
- interrupts = < 63 >;
+ interrupts = <0 31 0x04>;
+ clocks = <&tegra_car 15>;
+ status = "disabled";
};
};
diff --git a/arch/arm/dts/tegra30.dtsi b/arch/arm/dts/tegra30.dtsi
index 7b8126f..ccf154f 100644
--- a/arch/arm/dts/tegra30.dtsi
+++ b/arch/arm/dts/tegra30.dtsi
@@ -1,10 +1,10 @@
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
/ {
compatible = "nvidia,tegra30";
- tegra_car: clock@60006000 {
- compatible = "nvidia,tegra30-car", "nvidia,tegra20-car";
+ tegra_car: clock {
+ compatible = "nvidia,tegra30-car";
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
};
@@ -44,51 +44,79 @@
0 141 0x04
0 142 0x04
0 143 0x04>;
+ clocks = <&tegra_car 34>;
+ };
+
+ gpio: gpio {
+ compatible = "nvidia,tegra30-gpio";
+ reg = <0x6000d000 0x1000>;
+ interrupts = <0 32 0x04
+ 0 33 0x04
+ 0 34 0x04
+ 0 35 0x04
+ 0 55 0x04
+ 0 87 0x04
+ 0 89 0x04
+ 0 125 0x04>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
};
i2c@7000c000 {
+ compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+ reg = <0x7000c000 0x100>;
+ interrupts = <0 38 0x04>;
#address-cells = <1>;
#size-cells = <0>;
- compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
- reg = <0x7000C000 0x100>;
- /* PERIPH_ID_I2C1, CLK_M */
- clocks = <&tegra_car 12>;
+ clocks = <&tegra_car 12>, <&tegra_car 182>;
+ clock-names = "div-clk", "fast-clk";
+ status = "disabled";
};
i2c@7000c400 {
+ compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+ reg = <0x7000c400 0x100>;
+ interrupts = <0 84 0x04>;
#address-cells = <1>;
#size-cells = <0>;
- compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
- reg = <0x7000C400 0x100>;
- /* PERIPH_ID_I2C2, CLK_M */
- clocks = <&tegra_car 54>;
+ clocks = <&tegra_car 54>, <&tegra_car 182>;
+ clock-names = "div-clk", "fast-clk";
+ status = "disabled";
};
i2c@7000c500 {
+ compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+ reg = <0x7000c500 0x100>;
+ interrupts = <0 92 0x04>;
#address-cells = <1>;
#size-cells = <0>;
- compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
- reg = <0x7000C500 0x100>;
- /* PERIPH_ID_I2C3, CLK_M */
- clocks = <&tegra_car 67>;
+ clocks = <&tegra_car 67>, <&tegra_car 182>;
+ clock-names = "div-clk", "fast-clk";
+ status = "disabled";
};
i2c@7000c700 {
+ compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+ reg = <0x7000c700 0x100>;
+ interrupts = <0 120 0x04>;
#address-cells = <1>;
#size-cells = <0>;
- compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
- reg = <0x7000C700 0x100>;
- /* PERIPH_ID_I2C4, CLK_M */
- clocks = <&tegra_car 103>;
+ clocks = <&tegra_car 103>, <&tegra_car 182>;
+ clock-names = "div-clk", "fast-clk";
+ status = "disabled";
};
i2c@7000d000 {
+ compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+ reg = <0x7000d000 0x100>;
+ interrupts = <0 53 0x04>;
#address-cells = <1>;
#size-cells = <0>;
- compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
- reg = <0x7000D000 0x100>;
- /* PERIPH_ID_I2C_DVC, CLK_M */
- clocks = <&tegra_car 47>;
+ clocks = <&tegra_car 47>, <&tegra_car 182>;
+ clock-names = "div-clk", "fast-clk";
+ status = "disabled";
};
spi@7000d400 {
@@ -98,9 +126,8 @@
nvidia,dma-request-selector = <&apbdma 15>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disabled";
- /* PERIPH_ID_SBC1, PLLP_OUT0 */
clocks = <&tegra_car 41>;
+ status = "disabled";
};
spi@7000d600 {
@@ -110,9 +137,8 @@
nvidia,dma-request-selector = <&apbdma 16>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disabled";
- /* PERIPH_ID_SBC2, PLLP_OUT0 */
clocks = <&tegra_car 44>;
+ status = "disabled";
};
spi@7000d800 {
@@ -122,9 +148,8 @@
nvidia,dma-request-selector = <&apbdma 17>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disabled";
- /* PERIPH_ID_SBC3, PLLP_OUT0 */
clocks = <&tegra_car 46>;
+ status = "disabled";
};
spi@7000da00 {
@@ -134,9 +159,8 @@
nvidia,dma-request-selector = <&apbdma 18>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disabled";
- /* PERIPH_ID_SBC4, PLLP_OUT0 */
clocks = <&tegra_car 68>;
+ status = "disabled";
};
spi@7000dc00 {
@@ -146,9 +170,8 @@
nvidia,dma-request-selector = <&apbdma 27>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disabled";
- /* PERIPH_ID_SBC5, PLLP_OUT0 */
clocks = <&tegra_car 104>;
+ status = "disabled";
};
spi@7000de00 {
@@ -158,8 +181,39 @@
nvidia,dma-request-selector = <&apbdma 28>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disabled";
- /* PERIPH_ID_SBC6, PLLP_OUT0 */
clocks = <&tegra_car 105>;
+ status = "disabled";
+ };
+
+ sdhci@78000000 {
+ compatible = "nvidia,tegra30-sdhci";
+ reg = <0x78000000 0x200>;
+ interrupts = <0 14 0x04>;
+ clocks = <&tegra_car 14>;
+ status = "disabled";
+ };
+
+ sdhci@78000200 {
+ compatible = "nvidia,tegra30-sdhci";
+ reg = <0x78000200 0x200>;
+ interrupts = <0 15 0x04>;
+ clocks = <&tegra_car 9>;
+ status = "disabled";
+ };
+
+ sdhci@78000400 {
+ compatible = "nvidia,tegra30-sdhci";
+ reg = <0x78000400 0x200>;
+ interrupts = <0 19 0x04>;
+ clocks = <&tegra_car 69>;
+ status = "disabled";
+ };
+
+ sdhci@78000600 {
+ compatible = "nvidia,tegra30-sdhci";
+ reg = <0x78000600 0x200>;
+ interrupts = <0 31 0x04>;
+ clocks = <&tegra_car 15>;
+ status = "disabled";
};
};
diff --git a/arch/arm/include/asm/arch-am33xx/mmc_host_def.h b/arch/arm/include/asm/arch-am33xx/mmc_host_def.h
index 1f597c0..33c9c83 100644
--- a/arch/arm/include/asm/arch-am33xx/mmc_host_def.h
+++ b/arch/arm/include/asm/arch-am33xx/mmc_host_def.h
@@ -16,148 +16,12 @@
#ifndef MMC_HOST_DEF_H
#define MMC_HOST_DEF_H
+#include <asm/omap_mmc.h>
+
/*
* OMAP HSMMC register definitions
*/
#define OMAP_HSMMC1_BASE 0x48060100
#define OMAP_HSMMC2_BASE 0x481D8100
-typedef struct hsmmc {
- unsigned char res1[0x10];
- unsigned int sysconfig; /* 0x10 */
- unsigned int sysstatus; /* 0x14 */
- unsigned char res2[0x14];
- unsigned int con; /* 0x2C */
- unsigned char res3[0xD4];
- unsigned int blk; /* 0x104 */
- unsigned int arg; /* 0x108 */
- unsigned int cmd; /* 0x10C */
- unsigned int rsp10; /* 0x110 */
- unsigned int rsp32; /* 0x114 */
- unsigned int rsp54; /* 0x118 */
- unsigned int rsp76; /* 0x11C */
- unsigned int data; /* 0x120 */
- unsigned int pstate; /* 0x124 */
- unsigned int hctl; /* 0x128 */
- unsigned int sysctl; /* 0x12C */
- unsigned int stat; /* 0x130 */
- unsigned int ie; /* 0x134 */
- unsigned char res4[0x8];
- unsigned int capa; /* 0x140 */
-} hsmmc_t;
-
-/*
- * OMAP HS MMC Bit definitions
- */
-#define MMC_SOFTRESET (0x1 << 1)
-#define RESETDONE (0x1 << 0)
-#define NOOPENDRAIN (0x0 << 0)
-#define OPENDRAIN (0x1 << 0)
-#define OD (0x1 << 0)
-#define INIT_NOINIT (0x0 << 1)
-#define INIT_INITSTREAM (0x1 << 1)
-#define HR_NOHOSTRESP (0x0 << 2)
-#define STR_BLOCK (0x0 << 3)
-#define MODE_FUNC (0x0 << 4)
-#define DW8_1_4BITMODE (0x0 << 5)
-#define MIT_CTO (0x0 << 6)
-#define CDP_ACTIVEHIGH (0x0 << 7)
-#define WPP_ACTIVEHIGH (0x0 << 8)
-#define RESERVED_MASK (0x3 << 9)
-#define CTPL_MMC_SD (0x0 << 11)
-#define BLEN_512BYTESLEN (0x200 << 0)
-#define NBLK_STPCNT (0x0 << 16)
-#define DE_DISABLE (0x0 << 0)
-#define BCE_DISABLE (0x0 << 1)
-#define BCE_ENABLE (0x1 << 1)
-#define ACEN_DISABLE (0x0 << 2)
-#define DDIR_OFFSET (4)
-#define DDIR_MASK (0x1 << 4)
-#define DDIR_WRITE (0x0 << 4)
-#define DDIR_READ (0x1 << 4)
-#define MSBS_SGLEBLK (0x0 << 5)
-#define MSBS_MULTIBLK (0x1 << 5)
-#define RSP_TYPE_OFFSET (16)
-#define RSP_TYPE_MASK (0x3 << 16)
-#define RSP_TYPE_NORSP (0x0 << 16)
-#define RSP_TYPE_LGHT136 (0x1 << 16)
-#define RSP_TYPE_LGHT48 (0x2 << 16)
-#define RSP_TYPE_LGHT48B (0x3 << 16)
-#define CCCE_NOCHECK (0x0 << 19)
-#define CCCE_CHECK (0x1 << 19)
-#define CICE_NOCHECK (0x0 << 20)
-#define CICE_CHECK (0x1 << 20)
-#define DP_OFFSET (21)
-#define DP_MASK (0x1 << 21)
-#define DP_NO_DATA (0x0 << 21)
-#define DP_DATA (0x1 << 21)
-#define CMD_TYPE_NORMAL (0x0 << 22)
-#define INDEX_OFFSET (24)
-#define INDEX_MASK (0x3f << 24)
-#define INDEX(i) (i << 24)
-#define DATI_MASK (0x1 << 1)
-#define CMDI_MASK (0x1 << 0)
-#define DTW_1_BITMODE (0x0 << 1)
-#define DTW_4_BITMODE (0x1 << 1)
-#define DTW_8_BITMODE (0x1 << 5) /* CON[DW8]*/
-#define SDBP_PWROFF (0x0 << 8)
-#define SDBP_PWRON (0x1 << 8)
-#define SDVS_1V8 (0x5 << 9)
-#define SDVS_3V0 (0x6 << 9)
-#define ICE_MASK (0x1 << 0)
-#define ICE_STOP (0x0 << 0)
-#define ICS_MASK (0x1 << 1)
-#define ICS_NOTREADY (0x0 << 1)
-#define ICE_OSCILLATE (0x1 << 0)
-#define CEN_MASK (0x1 << 2)
-#define CEN_DISABLE (0x0 << 2)
-#define CEN_ENABLE (0x1 << 2)
-#define CLKD_OFFSET (6)
-#define CLKD_MASK (0x3FF << 6)
-#define DTO_MASK (0xF << 16)
-#define DTO_15THDTO (0xE << 16)
-#define SOFTRESETALL (0x1 << 24)
-#define CC_MASK (0x1 << 0)
-#define TC_MASK (0x1 << 1)
-#define BWR_MASK (0x1 << 4)
-#define BRR_MASK (0x1 << 5)
-#define ERRI_MASK (0x1 << 15)
-#define IE_CC (0x01 << 0)
-#define IE_TC (0x01 << 1)
-#define IE_BWR (0x01 << 4)
-#define IE_BRR (0x01 << 5)
-#define IE_CTO (0x01 << 16)
-#define IE_CCRC (0x01 << 17)
-#define IE_CEB (0x01 << 18)
-#define IE_CIE (0x01 << 19)
-#define IE_DTO (0x01 << 20)
-#define IE_DCRC (0x01 << 21)
-#define IE_DEB (0x01 << 22)
-#define IE_CERR (0x01 << 28)
-#define IE_BADA (0x01 << 29)
-
-#define VS30_3V0SUP (1 << 25)
-#define VS18_1V8SUP (1 << 26)
-
-/* Driver definitions */
-#define MMCSD_SECTOR_SIZE 512
-#define MMC_CARD 0
-#define SD_CARD 1
-#define BYTE_MODE 0
-#define SECTOR_MODE 1
-#define CLK_INITSEQ 0
-#define CLK_400KHZ 1
-#define CLK_MISC 2
-
-#define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK)
-#define MMC_CMD0 (INDEX(0) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE)
-
-/* Clock Configurations and Macros */
-#define MMC_CLOCK_REFERENCE 96 /* MHz */
-
-#define mmc_reg_out(addr, mask, val)\
- writel((readl(addr) & (~(mask))) | ((val) & (mask)), (addr))
-
-int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max);
-
#endif /* MMC_HOST_DEF_H */
diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h
index 644ff35..e961ce0 100644
--- a/arch/arm/include/asm/arch-am33xx/spl.h
+++ b/arch/arm/include/asm/arch-am33xx/spl.h
@@ -29,6 +29,7 @@
#define BOOT_DEVICE_MMC2 9 /* eMMC or daughter card */
#define BOOT_DEVICE_SPI 11
#define BOOT_DEVICE_UART 65
+#define BOOT_DEVICE_USBETH 68
#define BOOT_DEVICE_CPGMAC 70
#define BOOT_DEVICE_MMC2_2 0xFF
#endif
diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h
index 588d8de..97ab60d 100644
--- a/arch/arm/include/asm/arch-am33xx/sys_proto.h
+++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h
@@ -35,5 +35,7 @@ void ddr_pll_config(unsigned int ddrpll_M);
void sdelay(unsigned long);
void gpmc_init(void);
+void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
+ u32 size);
void omap_nand_switch_ecc(int);
#endif
diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5.h b/arch/arm/include/asm/arch-at91/at91sam9x5.h
index de0f1b1..b7d1932 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9x5.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9x5.h
@@ -140,12 +140,6 @@
/*
* Cpu Name
*/
-#define CONFIG_SYS_AT91_G15_CPU_NAME "AT91SAM9G15"
-#define CONFIG_SYS_AT91_G25_CPU_NAME "AT91SAM9G25"
-#define CONFIG_SYS_AT91_G35_CPU_NAME "AT91SAM9G35"
-#define CONFIG_SYS_AT91_X25_CPU_NAME "AT91SAM9X25"
-#define CONFIG_SYS_AT91_X35_CPU_NAME "AT91SAM9X35"
-#define CONFIG_SYS_AT91_UNKNOWN_CPU "Unknown CPU type"
#define ATMEL_CPU_NAME get_cpu_name()
/*
diff --git a/arch/arm/include/asm/arch-davinci/gpio.h b/arch/arm/include/asm/arch-davinci/gpio.h
index 5206b12..06390c8 100644
--- a/arch/arm/include/asm/arch-davinci/gpio.h
+++ b/arch/arm/include/asm/arch-davinci/gpio.h
@@ -65,15 +65,16 @@ struct davinci_gpio_bank {
#define davinci_gpio_bank67 ((struct davinci_gpio *)DAVINCI_GPIO_BANK67)
#define davinci_gpio_bank8 ((struct davinci_gpio *)DAVINCI_GPIO_BANK8)
+#define gpio_status() gpio_info()
+#define GPIO_NAME_SIZE 20
#if defined(CONFIG_SOC_DM644X)
/* GPIO0 to GPIO53, omit the V3.3 volts one */
#define MAX_NUM_GPIOS 70
+#elif defined(CONFIG_SOC_DA8XX) && !defined(CONFIG_SOC_DA850)
+#define MAX_NUM_GPIOS 128
#else
#define MAX_NUM_GPIOS 144
#endif
-
-#define gpio_status() gpio_info()
-#define GPIO_NAME_SIZE 20
#define GPIO_BANK(gp) (davinci_gpio_bank01 + ((gp) >> 5))
#define GPIO_BIT(gp) ((gp) & 0x1F)
diff --git a/arch/arm/include/asm/arch-mx35/spl.h b/arch/arm/include/asm/arch-mx35/spl.h
index 91d11ae..3ca4c94 100644
--- a/arch/arm/include/asm/arch-mx35/spl.h
+++ b/arch/arm/include/asm/arch-mx35/spl.h
@@ -27,7 +27,7 @@
#define BOOT_DEVICE_XIP 1
#define BOOT_DEVICE_XIPWAIT 2
#define BOOT_DEVICE_NAND 3
-#define BOOT_DEVICE_ONE_NAND 4
+#define BOOT_DEVICE_ONENAND 4
#define BOOT_DEVICE_MMC1 5
#define BOOT_DEVICE_MMC2 6
#define BOOT_DEVICE_MMC2_2 7
diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h
index d670f30..7676457 100644
--- a/arch/arm/include/asm/arch-mx6/crm_regs.h
+++ b/arch/arm/include/asm/arch-mx6/crm_regs.h
@@ -20,6 +20,17 @@
#ifndef __ARCH_ARM_MACH_MX6_CCM_REGS_H__
#define __ARCH_ARM_MACH_MX6_CCM_REGS_H__
+#define CCM_CCGR0 0x020C4068
+#define CCM_CCGR1 0x020C406c
+#define CCM_CCGR2 0x020C4070
+#define CCM_CCGR3 0x020C4074
+#define CCM_CCGR4 0x020C4078
+#define CCM_CCGR5 0x020C407c
+#define CCM_CCGR6 0x020C4080
+
+#define PMU_MISC2 0x020C8170
+
+#ifndef __ASSEMBLY__
struct mxc_ccm_reg {
u32 ccr; /* 0x0000 */
u32 ccdr;
@@ -105,6 +116,7 @@ struct mxc_ccm_reg {
u32 analog_pfd_528_clr;
u32 analog_pfd_528_tog;
};
+#endif
/* Define the bits in register CCR */
#define MXC_CCM_CCR_RBC_EN (1 << 27)
diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
index 3eb0081..eaa7439 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -601,5 +601,13 @@ struct iomuxc_base_regs {
u32 daisy[104]; /* 0x7b0..94c */
};
+struct wdog_regs {
+ u16 wcr; /* Control */
+ u16 wsr; /* Service */
+ u16 wrsr; /* Reset Status */
+ u16 wicr; /* Interrupt Control */
+ u16 wmcr; /* Miscellaneous Control */
+};
+
#endif /* __ASSEMBLER__*/
#endif /* __ASM_ARCH_MX6_IMX_REGS_H__ */
diff --git a/arch/arm/include/asm/arch-mx6/iomux.h b/arch/arm/include/asm/arch-mx6/iomux.h
index d23abd7..d67f600 100644
--- a/arch/arm/include/asm/arch-mx6/iomux.h
+++ b/arch/arm/include/asm/arch-mx6/iomux.h
@@ -16,6 +16,11 @@
#ifndef __ASM_ARCH_IOMUX_H__
#define __ASM_ARCH_IOMUX_H__
+
+#define MX6_IOMUXC_GPR4 0x020e0010
+#define MX6_IOMUXC_GPR6 0x020e0018
+#define MX6_IOMUXC_GPR7 0x020e001c
+
/*
* IOMUXC_GPR13 bit fields
*/
diff --git a/arch/arm/include/asm/arch-mx6/mx6-ddr.h b/arch/arm/include/asm/arch-mx6/mx6-ddr.h
new file mode 100644
index 0000000..1fdc1d4
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx6/mx6-ddr.h
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2013 Boundary Devices Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef __ASM_ARCH_MX6_DDR_H__
+#define __ASM_ARCH_MX6_DDR_H__
+
+#ifdef CONFIG_MX6Q
+#include "mx6q-ddr.h"
+#else
+#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
+#include "mx6dl-ddr.h"
+#else
+#error "Please select cpu"
+#endif /* CONFIG_MX6DL or CONFIG_MX6S */
+#endif /* CONFIG_MX6Q */
+
+#define MX6_MMDC_P0_MDCTL 0x021b0000
+#define MX6_MMDC_P0_MDPDC 0x021b0004
+#define MX6_MMDC_P0_MDOTC 0x021b0008
+#define MX6_MMDC_P0_MDCFG0 0x021b000c
+#define MX6_MMDC_P0_MDCFG1 0x021b0010
+#define MX6_MMDC_P0_MDCFG2 0x021b0014
+#define MX6_MMDC_P0_MDMISC 0x021b0018
+#define MX6_MMDC_P0_MDSCR 0x021b001c
+#define MX6_MMDC_P0_MDREF 0x021b0020
+#define MX6_MMDC_P0_MDRWD 0x021b002c
+#define MX6_MMDC_P0_MDOR 0x021b0030
+#define MX6_MMDC_P0_MDASP 0x021b0040
+#define MX6_MMDC_P0_MAPSR 0x021b0404
+#define MX6_MMDC_P0_MPZQHWCTRL 0x021b0800
+#define MX6_MMDC_P0_MPWLDECTRL0 0x021b080c
+#define MX6_MMDC_P0_MPWLDECTRL1 0x021b0810
+#define MX6_MMDC_P0_MPODTCTRL 0x021b0818
+#define MX6_MMDC_P0_MPRDDQBY0DL 0x021b081c
+#define MX6_MMDC_P0_MPRDDQBY1DL 0x021b0820
+#define MX6_MMDC_P0_MPRDDQBY2DL 0x021b0824
+#define MX6_MMDC_P0_MPRDDQBY3DL 0x021b0828
+#define MX6_MMDC_P0_MPDGCTRL0 0x021b083c
+#define MX6_MMDC_P0_MPDGCTRL1 0x021b0840
+#define MX6_MMDC_P0_MPRDDLCTL 0x021b0848
+#define MX6_MMDC_P0_MPWRDLCTL 0x021b0850
+#define MX6_MMDC_P0_MPMUR0 0x021b08b8
+
+#define MX6_MMDC_P1_MDCTL 0x021b4000
+#define MX6_MMDC_P1_MDPDC 0x021b4004
+#define MX6_MMDC_P1_MDOTC 0x021b4008
+#define MX6_MMDC_P1_MDCFG0 0x021b400c
+#define MX6_MMDC_P1_MDCFG1 0x021b4010
+#define MX6_MMDC_P1_MDCFG2 0x021b4014
+#define MX6_MMDC_P1_MDMISC 0x021b4018
+#define MX6_MMDC_P1_MDSCR 0x021b401c
+#define MX6_MMDC_P1_MDREF 0x021b4020
+#define MX6_MMDC_P1_MDRWD 0x021b402c
+#define MX6_MMDC_P1_MDOR 0x021b4030
+#define MX6_MMDC_P1_MDASP 0x021b4040
+#define MX6_MMDC_P1_MAPSR 0x021b4404
+#define MX6_MMDC_P1_MPZQHWCTRL 0x021b4800
+#define MX6_MMDC_P1_MPWLDECTRL0 0x021b480c
+#define MX6_MMDC_P1_MPWLDECTRL1 0x021b4810
+#define MX6_MMDC_P1_MPODTCTRL 0x021b4818
+#define MX6_MMDC_P1_MPRDDQBY0DL 0x021b481c
+#define MX6_MMDC_P1_MPRDDQBY1DL 0x021b4820
+#define MX6_MMDC_P1_MPRDDQBY2DL 0x021b4824
+#define MX6_MMDC_P1_MPRDDQBY3DL 0x021b4828
+#define MX6_MMDC_P1_MPDGCTRL0 0x021b483c
+#define MX6_MMDC_P1_MPDGCTRL1 0x021b4840
+#define MX6_MMDC_P1_MPRDDLCTL 0x021b4848
+#define MX6_MMDC_P1_MPWRDLCTL 0x021b4850
+#define MX6_MMDC_P1_MPMUR0 0x021b48b8
+
+#endif /*__ASM_ARCH_MX6_DDR_H__ */
diff --git a/arch/arm/include/asm/arch-mx6/mx6-pins.h b/arch/arm/include/asm/arch-mx6/mx6-pins.h
new file mode 100644
index 0000000..63f4856
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx6/mx6-pins.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2013 Boundary Devices Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef __ASM_ARCH_MX6_PINS_H__
+#define __ASM_ARCH_MX6_PINS_H__
+
+#ifdef CONFIG_MX6Q
+#include "mx6q_pins.h"
+#else
+#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
+#include "mx6dl_pins.h"
+#else
+#error "Please select cpu"
+#endif /* CONFIG_MX6DL or CONFIG_MX6S */
+#endif /* CONFIG_MX6Q */
+
+#endif /*__ASM_ARCH_MX6_PINS_H__ */
diff --git a/arch/arm/include/asm/arch-mx6/mx6dl-ddr.h b/arch/arm/include/asm/arch-mx6/mx6dl-ddr.h
new file mode 100644
index 0000000..325da33
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx6/mx6dl-ddr.h
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) 2013 Boundary Devices Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef __ASM_ARCH_MX6DLS_DDR_H__
+#define __ASM_ARCH_MX6DLS_DDR_H__
+
+#ifndef CONFIG_MX6DL
+#ifndef CONFIG_MX6S
+#error "wrong CPU"
+#endif
+#endif
+
+#define MX6_IOM_DRAM_DQM0 0x020e0470
+#define MX6_IOM_DRAM_DQM1 0x020e0474
+#define MX6_IOM_DRAM_DQM2 0x020e0478
+#define MX6_IOM_DRAM_DQM3 0x020e047c
+#define MX6_IOM_DRAM_DQM4 0x020e0480
+#define MX6_IOM_DRAM_DQM5 0x020e0484
+#define MX6_IOM_DRAM_DQM6 0x020e0488
+#define MX6_IOM_DRAM_DQM7 0x020e048c
+
+#define MX6_IOM_DRAM_CAS 0x020e0464
+#define MX6_IOM_DRAM_RAS 0x020e0490
+#define MX6_IOM_DRAM_RESET 0x020e0494
+#define MX6_IOM_DRAM_SDCLK_0 0x020e04ac
+#define MX6_IOM_DRAM_SDCLK_1 0x020e04b0
+#define MX6_IOM_DRAM_SDBA2 0x020e04a0
+#define MX6_IOM_DRAM_SDCKE0 0x020e04a4
+#define MX6_IOM_DRAM_SDCKE1 0x020e04a8
+#define MX6_IOM_DRAM_SDODT0 0x020e04b4
+#define MX6_IOM_DRAM_SDODT1 0x020e04b8
+
+#define MX6_IOM_DRAM_SDQS0 0x020e04bc
+#define MX6_IOM_DRAM_SDQS1 0x020e04c0
+#define MX6_IOM_DRAM_SDQS2 0x020e04c4
+#define MX6_IOM_DRAM_SDQS3 0x020e04c8
+#define MX6_IOM_DRAM_SDQS4 0x020e04cc
+#define MX6_IOM_DRAM_SDQS5 0x020e04d0
+#define MX6_IOM_DRAM_SDQS6 0x020e04d4
+#define MX6_IOM_DRAM_SDQS7 0x020e04d8
+
+#define MX6_IOM_GRP_B0DS 0x020e0764
+#define MX6_IOM_GRP_B1DS 0x020e0770
+#define MX6_IOM_GRP_B2DS 0x020e0778
+#define MX6_IOM_GRP_B3DS 0x020e077c
+#define MX6_IOM_GRP_B4DS 0x020e0780
+#define MX6_IOM_GRP_B5DS 0x020e0784
+#define MX6_IOM_GRP_B6DS 0x020e078c
+#define MX6_IOM_GRP_B7DS 0x020e0748
+#define MX6_IOM_GRP_ADDDS 0x020e074c
+#define MX6_IOM_DDRMODE_CTL 0x020e0750
+#define MX6_IOM_GRP_DDRPKE 0x020e0754
+#define MX6_IOM_GRP_DDRMODE 0x020e0760
+#define MX6_IOM_GRP_CTLDS 0x020e076c
+#define MX6_IOM_GRP_DDR_TYPE 0x020e0774
+
+#endif /*__ASM_ARCH_MX6S_DDR_H__ */
diff --git a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
index 79e2c4f..9494e41 100644
--- a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
@@ -50,100 +50,103 @@
#define NO_MUX_I 0
#define NO_PAD_I 0
enum {
- MX6DL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK = IOMUX_PAD(0x03B0, 0x009C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6DL_PAD_DI0_PIN15__IPU1_DI0_PIN15 = IOMUX_PAD(0x03B4, 0x00A0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6DL_PAD_DI0_PIN2__IPU1_DI0_PIN2 = IOMUX_PAD(0x03B8, 0x00A4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6DL_PAD_DI0_PIN3__IPU1_DI0_PIN3 = IOMUX_PAD(0x03BC, 0x00A8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6DL_PAD_DI0_PIN4__GPIO_4_20 = IOMUX_PAD(0x03C0, 0x00AC, 5, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6DL_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0 = IOMUX_PAD(0x03C4, 0x00B0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6DL_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1 = IOMUX_PAD(0x03C8, 0x00B4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6DL_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10 = IOMUX_PAD(0x03CC, 0x00B8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6DL_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11 = IOMUX_PAD(0x03D0, 0x00BC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6DL_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12 = IOMUX_PAD(0x03D4, 0x00C0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6DL_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13 = IOMUX_PAD(0x03D8, 0x00C4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6DL_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14 = IOMUX_PAD(0x03DC, 0x00C8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6DL_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15 = IOMUX_PAD(0x03E0, 0x00CC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6DL_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16 = IOMUX_PAD(0x03E4, 0x00D0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6DL_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17 = IOMUX_PAD(0x03E8, 0x00D4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6DL_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18 = IOMUX_PAD(0x03EC, 0x00D8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6DL_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19 = IOMUX_PAD(0x03F0, 0x00DC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6DL_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2 = IOMUX_PAD(0x03F4, 0x00E0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6DL_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20 = IOMUX_PAD(0x03F8, 0x00E4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6DL_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21 = IOMUX_PAD(0x03FC, 0x00E8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6DL_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22 = IOMUX_PAD(0x0400, 0x00EC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6DL_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23 = IOMUX_PAD(0x0404, 0x00F0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6DL_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3 = IOMUX_PAD(0x0408, 0x00F4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6DL_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4 = IOMUX_PAD(0x040C, 0x00F8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6DL_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5 = IOMUX_PAD(0x0410, 0x00FC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6DL_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6 = IOMUX_PAD(0x0414, 0x0100, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6DL_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7 = IOMUX_PAD(0x0418, 0x0104, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6DL_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8 = IOMUX_PAD(0x041C, 0x0108, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6DL_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9 = IOMUX_PAD(0x0420, 0x010C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6DL_PAD_EIM_D16__ECSPI1_SCLK = IOMUX_PAD(0x0514, 0x0144, 1, 0x07D8, 2, 0),
- MX6DL_PAD_EIM_D17__ECSPI1_MISO = IOMUX_PAD(0x0518, 0x0148, 1, 0x07DC, 2, 0),
- MX6DL_PAD_EIM_D18__ECSPI1_MOSI = IOMUX_PAD(0x051C, 0x014C, 1, 0x07E0, 2, 0),
- MX6DL_PAD_EIM_D19__GPIO_3_19 = IOMUX_PAD(0x0520, 0x0150, 5, 0x0000, 0, 0),
- MX6DL_PAD_EIM_D21__GPIO_3_21 = IOMUX_PAD(0x0528, 0x0158, 5, 0x0000, 0, 0),
- MX6DL_PAD_EIM_D21__I2C1_SCL = IOMUX_PAD(0x0528, 0x0158, 6 | IOMUX_CONFIG_SION, 0x0868, 1, 0),
- MX6DL_PAD_EIM_D23__GPIO_3_23 = IOMUX_PAD(0x0530, 0x0160, 5, 0x0000, 0, 0),
- MX6DL_PAD_EIM_D26__UART2_TXD = IOMUX_PAD(0x053C, 0x016C, 4, 0x0000, 0, 0),
- MX6DL_PAD_EIM_D27__UART2_RXD = IOMUX_PAD(0x0540, 0x0170, 4, 0x0904, 1, 0),
- MX6DL_PAD_EIM_D28__I2C1_SDA = IOMUX_PAD(0x0544, 0x0174, 1 | IOMUX_CONFIG_SION, 0x086C, 1, 0),
- MX6DL_PAD_EIM_D28__GPIO_3_28 = IOMUX_PAD(0x0544, 0x0174, 5, 0x0000, 0, 0),
- MX6DL_PAD_ENET_MDC__ENET_MDC = IOMUX_PAD(0x05B8, 0x01E8, 1, 0x0000, 0, 0),
- MX6DL_PAD_ENET_MDIO__ENET_MDIO = IOMUX_PAD(0x05BC, 0x01EC, 1, 0x0810, 0, 0),
- MX6DL_PAD_ENET_REF_CLK__ENET_TX_CLK = IOMUX_PAD(0x05C0, 0x01F0, 1, 0x0000, 0, 0),
- MX6DL_PAD_ENET_RXD0__GPIO_1_27 = IOMUX_PAD(0x05C8, 0x01F8, 5, 0x0000, 0, 0),
- MX6DL_PAD_GPIO_16__GPIO_7_11 = IOMUX_PAD(0x05E4, 0x0214, 5, 0x0000, 0, 0),
- MX6DL_PAD_GPIO_16__I2C3_SDA = IOMUX_PAD(0x05E4, 0x0214, 6 | IOMUX_CONFIG_SION, 0x087C, 1, 0),
- MX6DL_PAD_GPIO_17__GPIO_7_12 = IOMUX_PAD(0x05E8, 0x0218, 5, 0x0000, 0, 0),
- MX6DL_PAD_GPIO_18__GPIO_7_13 = IOMUX_PAD(0x05EC, 0x021C, 5, 0x0000, 0, 0),
- MX6DL_PAD_GPIO_19__GPIO_4_5 = IOMUX_PAD(0x05F0, 0x0220, 5, 0x0000, 0, 0),
- MX6DL_PAD_GPIO_5__GPIO_1_5 = IOMUX_PAD(0x0600, 0x0230, 5, 0x0000, 0, 0),
- MX6DL_PAD_GPIO_5__I2C3_SCL = IOMUX_PAD(0x0600, 0x0230, 6 | IOMUX_CONFIG_SION, 0x0878, 2, 0),
- MX6DL_PAD_KEY_COL3__I2C2_SCL = IOMUX_PAD(0x0638, 0x0250, 4 | IOMUX_CONFIG_SION, 0x0870, 1, 0),
- MX6DL_PAD_KEY_COL3__GPIO_4_12 = IOMUX_PAD(0x0638, 0x0250, 5, 0x0000, 0, 0),
- MX6DL_PAD_KEY_ROW3__I2C2_SDA = IOMUX_PAD(0x064C, 0x0264, 4 | IOMUX_CONFIG_SION, 0x0874, 1, 0),
- MX6DL_PAD_KEY_ROW3__GPIO_4_13 = IOMUX_PAD(0x064C, 0x0264, 5, 0x0000, 0, 0),
- MX6DL_PAD_NANDF_D1__GPIO_2_1 = IOMUX_PAD(0x0670, 0x0288, 5, 0x0000, 0, 0),
- MX6DL_PAD_NANDF_D2__GPIO_2_2 = IOMUX_PAD(0x0674, 0x028C, 5, 0x0000, 0, 0),
- MX6DL_PAD_NANDF_D3__GPIO_2_3 = IOMUX_PAD(0x0678, 0x0290, 5, 0x0000, 0, 0),
- MX6DL_PAD_NANDF_D4__GPIO_2_4 = IOMUX_PAD(0x067C, 0x0294, 5, 0x0000, 0, 0),
- MX6DL_PAD_NANDF_D6__GPIO_2_6 = IOMUX_PAD(0x0684, 0x029C, 5, 0x0000, 0, 0),
- MX6DL_PAD_RGMII_RD0__ENET_RGMII_RD0 = IOMUX_PAD(0x0694, 0x02AC, 1, 0x0818, 1, 0),
- MX6DL_PAD_RGMII_RD0__GPIO_6_25 = IOMUX_PAD(0x0694, 0x02AC, 5, 0x0000, 0, 0),
- MX6DL_PAD_RGMII_RD1__ENET_RGMII_RD1 = IOMUX_PAD(0x0698, 0x02B0, 1, 0x081C, 1, 0),
- MX6DL_PAD_RGMII_RD1__GPIO_6_27 = IOMUX_PAD(0x0698, 0x02B0, 5, 0x0000, 0, 0),
- MX6DL_PAD_RGMII_RD2__ENET_RGMII_RD2 = IOMUX_PAD(0x069C, 0x02B4, 1, 0x0820, 1, 0),
- MX6DL_PAD_RGMII_RD2__GPIO_6_28 = IOMUX_PAD(0x069C, 0x02B4, 5, 0x0000, 0, 0),
- MX6DL_PAD_RGMII_RD3__ENET_RGMII_RD3 = IOMUX_PAD(0x06A0, 0x02B8, 1, 0x0824, 1, 0),
- MX6DL_PAD_RGMII_RD3__GPIO_6_29 = IOMUX_PAD(0x06A0, 0x02B8, 5, 0x0000, 0, 0),
- MX6DL_PAD_RGMII_RX_CTL__RGMII_RX_CTL = IOMUX_PAD(0x06A4, 0x02BC, 1, 0x0828, 1, 0),
- MX6DL_PAD_RGMII_RX_CTL__GPIO_6_24 = IOMUX_PAD(0x06A4, 0x02BC, 5, 0x0000, 0, 0),
- MX6DL_PAD_RGMII_RXC__ENET_RGMII_RXC = IOMUX_PAD(0x06A8, 0x02C0, 1, 0x0814, 1, 0),
- MX6DL_PAD_RGMII_RXC__GPIO_6_30 = IOMUX_PAD(0x06A8, 0x02C0, 5, 0x0000, 0, 0),
- MX6DL_PAD_RGMII_TD0__ENET_RGMII_TD0 = IOMUX_PAD(0x06AC, 0x02C4, 1, 0x0000, 0, 0),
- MX6DL_PAD_RGMII_TD1__ENET_RGMII_TD1 = IOMUX_PAD(0x06B0, 0x02C8, 1, 0x0000, 0, 0),
- MX6DL_PAD_RGMII_TD2__ENET_RGMII_TD2 = IOMUX_PAD(0x06B4, 0x02CC, 1, 0x0000, 0, 0),
- MX6DL_PAD_RGMII_TD3__ENET_RGMII_TD3 = IOMUX_PAD(0x06B8, 0x02D0, 1, 0x0000, 0, 0),
- MX6DL_PAD_RGMII_TX_CTL__RGMII_TX_CTL = IOMUX_PAD(0x06BC, 0x02D4, 1, 0x0000, 0, 0),
- MX6DL_PAD_RGMII_TXC__ENET_RGMII_TXC = IOMUX_PAD(0x06C0, 0x02D8, 1, 0x0000, 0, 0),
- MX6DL_PAD_SD1_CMD__GPIO_1_18 = IOMUX_PAD(0x06C8, 0x02E0, 5, 0x0000, 0, 0),
- MX6DL_PAD_SD1_DAT3__GPIO_1_21 = IOMUX_PAD(0x06D8, 0x02F0, 5, 0x0000, 0, 0),
- MX6DL_PAD_SD3_CLK__USDHC3_CLK = IOMUX_PAD(0x06F4, 0x030C, 0, 0x0934, 1, 0),
- MX6DL_PAD_SD3_CMD__USDHC3_CMD = IOMUX_PAD(0x06F8, 0x0310, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0),
- MX6DL_PAD_SD3_DAT0__USDHC3_DAT0 = IOMUX_PAD(0x06FC, 0x0314, 0, 0x0000, 0, 0),
- MX6DL_PAD_SD3_DAT1__USDHC3_DAT1 = IOMUX_PAD(0x0700, 0x0318, 0, 0x0000, 0, 0),
- MX6DL_PAD_SD3_DAT2__USDHC3_DAT2 = IOMUX_PAD(0x0704, 0x031C, 0, 0x0000, 0, 0),
- MX6DL_PAD_SD3_DAT3__USDHC3_DAT3 = IOMUX_PAD(0x0708, 0x0320, 0, 0x0000, 0, 0),
- MX6DL_PAD_SD3_DAT5__GPIO_7_0 = IOMUX_PAD(0x0710, 0x0328, 5, 0x0000, 0, 0),
- MX6DL_PAD_SD3_DAT6__UART1_RXD = IOMUX_PAD(0x0714, 0x032C, 1, 0x08FC, 2, 0),
- MX6DL_PAD_SD3_DAT7__UART1_TXD = IOMUX_PAD(0x0718, 0x0330, 1, 0x0000, 0, 0),
- MX6DL_PAD_SD4_CLK__USDHC4_CLK = IOMUX_PAD(0x0720, 0x0338, 0, 0x0938, 1, 0),
- MX6DL_PAD_SD4_CMD__USDHC4_CMD = IOMUX_PAD(0x0724, 0x033C, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0),
- MX6DL_PAD_SD4_DAT0__USDHC4_DAT0 = IOMUX_PAD(0x0728, 0x0340, 1, 0x0000, 0, 0),
- MX6DL_PAD_SD4_DAT1__USDHC4_DAT1 = IOMUX_PAD(0x072C, 0x0344, 1, 0x0000, 0, 0),
- MX6DL_PAD_SD4_DAT2__USDHC4_DAT2 = IOMUX_PAD(0x0730, 0x0348, 1, 0x0000, 0, 0),
- MX6DL_PAD_SD4_DAT3__USDHC4_DAT3 = IOMUX_PAD(0x0734, 0x034C, 1, 0x0000, 0, 0),
+ MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK = IOMUX_PAD(0x03B0, 0x009C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15 = IOMUX_PAD(0x03B4, 0x00A0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DI0_PIN2__IPU1_DI0_PIN2 = IOMUX_PAD(0x03B8, 0x00A4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DI0_PIN3__IPU1_DI0_PIN3 = IOMUX_PAD(0x03BC, 0x00A8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DI0_PIN4__GPIO_4_20 = IOMUX_PAD(0x03C0, 0x00AC, 5, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0 = IOMUX_PAD(0x03C4, 0x00B0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1 = IOMUX_PAD(0x03C8, 0x00B4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10 = IOMUX_PAD(0x03CC, 0x00B8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11 = IOMUX_PAD(0x03D0, 0x00BC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12 = IOMUX_PAD(0x03D4, 0x00C0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13 = IOMUX_PAD(0x03D8, 0x00C4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14 = IOMUX_PAD(0x03DC, 0x00C8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15 = IOMUX_PAD(0x03E0, 0x00CC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16 = IOMUX_PAD(0x03E4, 0x00D0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17 = IOMUX_PAD(0x03E8, 0x00D4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18 = IOMUX_PAD(0x03EC, 0x00D8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19 = IOMUX_PAD(0x03F0, 0x00DC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2 = IOMUX_PAD(0x03F4, 0x00E0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20 = IOMUX_PAD(0x03F8, 0x00E4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21 = IOMUX_PAD(0x03FC, 0x00E8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22 = IOMUX_PAD(0x0400, 0x00EC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23 = IOMUX_PAD(0x0404, 0x00F0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3 = IOMUX_PAD(0x0408, 0x00F4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4 = IOMUX_PAD(0x040C, 0x00F8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5 = IOMUX_PAD(0x0410, 0x00FC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6 = IOMUX_PAD(0x0414, 0x0100, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7 = IOMUX_PAD(0x0418, 0x0104, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8 = IOMUX_PAD(0x041C, 0x0108, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9 = IOMUX_PAD(0x0420, 0x010C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_EIM_D16__ECSPI1_SCLK = IOMUX_PAD(0x0514, 0x0144, 1, 0x07D8, 2, 0),
+ MX6_PAD_EIM_D17__ECSPI1_MISO = IOMUX_PAD(0x0518, 0x0148, 1, 0x07DC, 2, 0),
+ MX6_PAD_EIM_D18__ECSPI1_MOSI = IOMUX_PAD(0x051C, 0x014C, 1, 0x07E0, 2, 0),
+ MX6_PAD_EIM_D19__GPIO_3_19 = IOMUX_PAD(0x0520, 0x0150, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D21__GPIO_3_21 = IOMUX_PAD(0x0528, 0x0158, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D21__I2C1_SCL = IOMUX_PAD(0x0528, 0x0158, 6 | IOMUX_CONFIG_SION, 0x0868, 1, 0),
+ MX6_PAD_EIM_D23__GPIO_3_23 = IOMUX_PAD(0x0530, 0x0160, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D26__UART2_TXD = IOMUX_PAD(0x053C, 0x016C, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_D27__UART2_RXD = IOMUX_PAD(0x0540, 0x0170, 4, 0x0904, 1, 0),
+ MX6_PAD_EIM_D28__I2C1_SDA = IOMUX_PAD(0x0544, 0x0174, 1 | IOMUX_CONFIG_SION, 0x086C, 1, 0),
+ MX6_PAD_EIM_D28__GPIO_3_28 = IOMUX_PAD(0x0544, 0x0174, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET_MDC__ENET_MDC = IOMUX_PAD(0x05B8, 0x01E8, 1, 0x0000, 0, 0),
+ MX6_PAD_ENET_MDIO__ENET_MDIO = IOMUX_PAD(0x05BC, 0x01EC, 1, 0x0810, 0, 0),
+ MX6_PAD_ENET_REF_CLK__ENET_TX_CLK = IOMUX_PAD(0x05C0, 0x01F0, 1, 0x0000, 0, 0),
+ MX6_PAD_ENET_RXD0__GPIO_1_27 = IOMUX_PAD(0x05C8, 0x01F8, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO_16__GPIO_7_11 = IOMUX_PAD(0x05E4, 0x0214, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO_16__I2C3_SDA = IOMUX_PAD(0x05E4, 0x0214, 6 | IOMUX_CONFIG_SION, 0x087C, 1, 0),
+ MX6_PAD_GPIO_17__GPIO_7_12 = IOMUX_PAD(0x05E8, 0x0218, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO_18__GPIO_7_13 = IOMUX_PAD(0x05EC, 0x021C, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO_19__GPIO_4_5 = IOMUX_PAD(0x05F0, 0x0220, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO_5__GPIO_1_5 = IOMUX_PAD(0x0600, 0x0230, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO_5__I2C3_SCL = IOMUX_PAD(0x0600, 0x0230, 6 | IOMUX_CONFIG_SION, 0x0878, 2, 0),
+ MX6_PAD_KEY_COL3__I2C2_SCL = IOMUX_PAD(0x0638, 0x0250, 4 | IOMUX_CONFIG_SION, 0x0870, 1, 0),
+ MX6_PAD_KEY_COL3__GPIO_4_12 = IOMUX_PAD(0x0638, 0x0250, 5, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW3__I2C2_SDA = IOMUX_PAD(0x064C, 0x0264, 4 | IOMUX_CONFIG_SION, 0x0874, 1, 0),
+ MX6_PAD_KEY_ROW3__GPIO_4_13 = IOMUX_PAD(0x064C, 0x0264, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS1__GPIO_6_14 = IOMUX_PAD(0x0660, 0x0278, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS2__GPIO_6_15 = IOMUX_PAD(0x0664, 0x027C, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS3__GPIO_6_16 = IOMUX_PAD(0x0668, 0x0280, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D1__GPIO_2_1 = IOMUX_PAD(0x0670, 0x0288, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D2__GPIO_2_2 = IOMUX_PAD(0x0674, 0x028C, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D3__GPIO_2_3 = IOMUX_PAD(0x0678, 0x0290, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D4__GPIO_2_4 = IOMUX_PAD(0x067C, 0x0294, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D6__GPIO_2_6 = IOMUX_PAD(0x0684, 0x029C, 5, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RD0__ENET_RGMII_RD0 = IOMUX_PAD(0x0694, 0x02AC, 1, 0x0818, 1, 0),
+ MX6_PAD_RGMII_RD0__GPIO_6_25 = IOMUX_PAD(0x0694, 0x02AC, 5, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RD1__ENET_RGMII_RD1 = IOMUX_PAD(0x0698, 0x02B0, 1, 0x081C, 1, 0),
+ MX6_PAD_RGMII_RD1__GPIO_6_27 = IOMUX_PAD(0x0698, 0x02B0, 5, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RD2__ENET_RGMII_RD2 = IOMUX_PAD(0x069C, 0x02B4, 1, 0x0820, 1, 0),
+ MX6_PAD_RGMII_RD2__GPIO_6_28 = IOMUX_PAD(0x069C, 0x02B4, 5, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RD3__ENET_RGMII_RD3 = IOMUX_PAD(0x06A0, 0x02B8, 1, 0x0824, 1, 0),
+ MX6_PAD_RGMII_RD3__GPIO_6_29 = IOMUX_PAD(0x06A0, 0x02B8, 5, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL = IOMUX_PAD(0x06A4, 0x02BC, 1, 0x0828, 1, 0),
+ MX6_PAD_RGMII_RX_CTL__GPIO_6_24 = IOMUX_PAD(0x06A4, 0x02BC, 5, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RXC__ENET_RGMII_RXC = IOMUX_PAD(0x06A8, 0x02C0, 1, 0x0814, 1, 0),
+ MX6_PAD_RGMII_RXC__GPIO_6_30 = IOMUX_PAD(0x06A8, 0x02C0, 5, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD0__ENET_RGMII_TD0 = IOMUX_PAD(0x06AC, 0x02C4, 1, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD1__ENET_RGMII_TD1 = IOMUX_PAD(0x06B0, 0x02C8, 1, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD2__ENET_RGMII_TD2 = IOMUX_PAD(0x06B4, 0x02CC, 1, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD3__ENET_RGMII_TD3 = IOMUX_PAD(0x06B8, 0x02D0, 1, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL = IOMUX_PAD(0x06BC, 0x02D4, 1, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TXC__ENET_RGMII_TXC = IOMUX_PAD(0x06C0, 0x02D8, 1, 0x0000, 0, 0),
+ MX6_PAD_SD1_CMD__GPIO_1_18 = IOMUX_PAD(0x06C8, 0x02E0, 5, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT3__GPIO_1_21 = IOMUX_PAD(0x06D8, 0x02F0, 5, 0x0000, 0, 0),
+ MX6_PAD_SD3_CLK__USDHC3_CLK = IOMUX_PAD(0x06F4, 0x030C, 0, 0x0934, 1, 0),
+ MX6_PAD_SD3_CMD__USDHC3_CMD = IOMUX_PAD(0x06F8, 0x0310, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT0__USDHC3_DAT0 = IOMUX_PAD(0x06FC, 0x0314, 0, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT1__USDHC3_DAT1 = IOMUX_PAD(0x0700, 0x0318, 0, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT2__USDHC3_DAT2 = IOMUX_PAD(0x0704, 0x031C, 0, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT3__USDHC3_DAT3 = IOMUX_PAD(0x0708, 0x0320, 0, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT5__GPIO_7_0 = IOMUX_PAD(0x0710, 0x0328, 5, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT6__UART1_RXD = IOMUX_PAD(0x0714, 0x032C, 1, 0x08FC, 2, 0),
+ MX6_PAD_SD3_DAT7__UART1_TXD = IOMUX_PAD(0x0718, 0x0330, 1, 0x0000, 0, 0),
+ MX6_PAD_SD4_CLK__USDHC4_CLK = IOMUX_PAD(0x0720, 0x0338, 0, 0x0938, 1, 0),
+ MX6_PAD_SD4_CMD__USDHC4_CMD = IOMUX_PAD(0x0724, 0x033C, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT0__USDHC4_DAT0 = IOMUX_PAD(0x0728, 0x0340, 1, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT1__USDHC4_DAT1 = IOMUX_PAD(0x072C, 0x0344, 1, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT2__USDHC4_DAT2 = IOMUX_PAD(0x0730, 0x0348, 1, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT3__USDHC4_DAT3 = IOMUX_PAD(0x0734, 0x034C, 1, 0x0000, 0, 0),
};
#endif /* __ASM_ARCH_MX6_MX6DL_PINS_H__ */
diff --git a/arch/arm/include/asm/arch-mx6/mx6q-ddr.h b/arch/arm/include/asm/arch-mx6/mx6q-ddr.h
new file mode 100644
index 0000000..e51727c
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx6/mx6q-ddr.h
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2013 Boundary Devices Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef __ASM_ARCH_MX6Q_DDR_H__
+#define __ASM_ARCH_MX6Q_DDR_H__
+
+#ifndef CONFIG_MX6Q
+#error "wrong CPU"
+#endif
+
+#define MX6_IOM_DRAM_DQM0 0x020e05ac
+#define MX6_IOM_DRAM_DQM1 0x020e05b4
+#define MX6_IOM_DRAM_DQM2 0x020e0528
+#define MX6_IOM_DRAM_DQM3 0x020e0520
+#define MX6_IOM_DRAM_DQM4 0x020e0514
+#define MX6_IOM_DRAM_DQM5 0x020e0510
+#define MX6_IOM_DRAM_DQM6 0x020e05bc
+#define MX6_IOM_DRAM_DQM7 0x020e05c4
+
+#define MX6_IOM_DRAM_CAS 0x020e056c
+#define MX6_IOM_DRAM_RAS 0x020e0578
+#define MX6_IOM_DRAM_RESET 0x020e057c
+#define MX6_IOM_DRAM_SDCLK_0 0x020e0588
+#define MX6_IOM_DRAM_SDCLK_1 0x020e0594
+#define MX6_IOM_DRAM_SDBA2 0x020e058c
+#define MX6_IOM_DRAM_SDCKE0 0x020e0590
+#define MX6_IOM_DRAM_SDCKE1 0x020e0598
+#define MX6_IOM_DRAM_SDODT0 0x020e059c
+#define MX6_IOM_DRAM_SDODT1 0x020e05a0
+
+#define MX6_IOM_DRAM_SDQS0 0x020e05a8
+#define MX6_IOM_DRAM_SDQS1 0x020e05b0
+#define MX6_IOM_DRAM_SDQS2 0x020e0524
+#define MX6_IOM_DRAM_SDQS3 0x020e051c
+#define MX6_IOM_DRAM_SDQS4 0x020e0518
+#define MX6_IOM_DRAM_SDQS5 0x020e050c
+#define MX6_IOM_DRAM_SDQS6 0x020e05b8
+#define MX6_IOM_DRAM_SDQS7 0x020e05c0
+
+#define MX6_IOM_GRP_B0DS 0x020e0784
+#define MX6_IOM_GRP_B1DS 0x020e0788
+#define MX6_IOM_GRP_B2DS 0x020e0794
+#define MX6_IOM_GRP_B3DS 0x020e079c
+#define MX6_IOM_GRP_B4DS 0x020e07a0
+#define MX6_IOM_GRP_B5DS 0x020e07a4
+#define MX6_IOM_GRP_B6DS 0x020e07a8
+#define MX6_IOM_GRP_B7DS 0x020e0748
+#define MX6_IOM_GRP_ADDDS 0x020e074c
+#define MX6_IOM_DDRMODE_CTL 0x020e0750
+#define MX6_IOM_GRP_DDRPKE 0x020e0758
+#define MX6_IOM_GRP_DDRMODE 0x020e0774
+#define MX6_IOM_GRP_CTLDS 0x020e078c
+#define MX6_IOM_GRP_DDR_TYPE 0x020e0798
+
+#endif /*__ASM_ARCH_MX6Q_DDR_H__ */
diff --git a/arch/arm/include/asm/arch-mx6/mx6q_pins.h b/arch/arm/include/asm/arch-mx6/mx6q_pins.h
new file mode 100644
index 0000000..1c1c008
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx6/mx6q_pins.h
@@ -0,0 +1,1671 @@
+/*
+ * Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Auto Generate file, please don't edit it
+ *
+ */
+
+#ifndef __ASM_ARCH_MX6_MX6Q_PINS_H__
+#define __ASM_ARCH_MX6_MX6Q_PINS_H__
+
+#include <asm/imx-common/iomux-v3.h>
+
+/* Use to set PAD control */
+#define PAD_CTL_HYS (1 << 16)
+#define PAD_CTL_PUS_100K_DOWN (0 << 14)
+#define PAD_CTL_PUS_47K_UP (1 << 14)
+#define PAD_CTL_PUS_100K_UP (2 << 14)
+#define PAD_CTL_PUS_22K_UP (3 << 14)
+
+#define PAD_CTL_PUE (1 << 13)
+#define PAD_CTL_PKE (1 << 12)
+#define PAD_CTL_ODE (1 << 11)
+#define PAD_CTL_SPEED_LOW (1 << 6)
+#define PAD_CTL_SPEED_MED (2 << 6)
+#define PAD_CTL_SPEED_HIGH (3 << 6)
+#define PAD_CTL_DSE_DISABLE (0 << 3)
+#define PAD_CTL_DSE_240ohm (1 << 3)
+#define PAD_CTL_DSE_120ohm (2 << 3)
+#define PAD_CTL_DSE_80ohm (3 << 3)
+#define PAD_CTL_DSE_60ohm (4 << 3)
+#define PAD_CTL_DSE_48ohm (5 << 3)
+#define PAD_CTL_DSE_40ohm (6 << 3)
+#define PAD_CTL_DSE_34ohm (7 << 3)
+#define PAD_CTL_SRE_FAST (1 << 0)
+#define PAD_CTL_SRE_SLOW (0 << 0)
+
+#define NO_MUX_I 0
+#define NO_PAD_I 0
+
+enum {
+ MX6_PAD_SD2_DAT1__USDHC2_DAT1 = IOMUX_PAD(0x0360, 0x004C, 0, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT1__ECSPI5_SS0 = IOMUX_PAD(0x0360, 0x004C, 1, 0x0834, 0, 0),
+ MX6_PAD_SD2_DAT1__WEIM_WEIM_CS_2 = IOMUX_PAD(0x0360, 0x004C, 2, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS = IOMUX_PAD(0x0360, 0x004C, 3, 0x07C8, 0, 0),
+ MX6_PAD_SD2_DAT1__KPP_COL_7 = IOMUX_PAD(0x0360, 0x004C, 4, 0x08F0, 0, 0),
+ MX6_PAD_SD2_DAT1__GPIO_1_14 = IOMUX_PAD(0x0360, 0x004C, 5, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT1__CCM_WAIT = IOMUX_PAD(0x0360, 0x004C, 6, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT1__ANATOP_TESTO_0 = IOMUX_PAD(0x0360, 0x004C, 7, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT2__USDHC2_DAT2 = IOMUX_PAD(0x0364, 0x0050, 0, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT2__ECSPI5_SS1 = IOMUX_PAD(0x0364, 0x0050, 1, 0x0838, 0, 0),
+ MX6_PAD_SD2_DAT2__WEIM_WEIM_CS_3 = IOMUX_PAD(0x0364, 0x0050, 2, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT2__AUDMUX_AUD4_TXD = IOMUX_PAD(0x0364, 0x0050, 3, 0x07B8, 0, 0),
+ MX6_PAD_SD2_DAT2__KPP_ROW_6 = IOMUX_PAD(0x0364, 0x0050, 4, 0x08F8, 0, 0),
+ MX6_PAD_SD2_DAT2__GPIO_1_13 = IOMUX_PAD(0x0364, 0x0050, 5, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT2__CCM_STOP = IOMUX_PAD(0x0364, 0x0050, 6, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT2__ANATOP_TESTO_1 = IOMUX_PAD(0x0364, 0x0050, 7, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT0__USDHC2_DAT0 = IOMUX_PAD(0x0368, 0x0054, 0, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT0__ECSPI5_MISO = IOMUX_PAD(0x0368, 0x0054, 1, 0x082C, 0, 0),
+ MX6_PAD_SD2_DAT0__AUDMUX_AUD4_RXD = IOMUX_PAD(0x0368, 0x0054, 3, 0x07B4, 0, 0),
+ MX6_PAD_SD2_DAT0__KPP_ROW_7 = IOMUX_PAD(0x0368, 0x0054, 4, 0x08FC, 0, 0),
+ MX6_PAD_SD2_DAT0__GPIO_1_15 = IOMUX_PAD(0x0368, 0x0054, 5, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT0__DCIC2_DCIC_OUT = IOMUX_PAD(0x0368, 0x0054, 6, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT0__TESTO_2 = IOMUX_PAD(0x0368, 0x0054, 7, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TXC__USBOH3_H2_DATA = IOMUX_PAD(0x036C, 0x0058, 0, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TXC__ENET_RGMII_TXC = IOMUX_PAD(0x036C, 0x0058, 1, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TXC__SPDIF_SPDIF_EXTCLK = IOMUX_PAD(0x036C, 0x0058, 2, 0x0918, 0, 0),
+ MX6_PAD_RGMII_TXC__GPIO_6_19 = IOMUX_PAD(0x036C, 0x0058, 5, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TXC__MIPI_CORE_DPHY_IN_0 = IOMUX_PAD(0x036C, 0x0058, 6, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TXC__ANATOP_24M_OUT = IOMUX_PAD(0x036C, 0x0058, 7, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD0__MIPI_HSI_CRL_TX_RDY = IOMUX_PAD(0x0370, 0x005C, 0, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD0__ENET_RGMII_TD0 = IOMUX_PAD(0x0370, 0x005C, 1, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD0__GPIO_6_20 = IOMUX_PAD(0x0370, 0x005C, 5, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD0__MIPI_CORE_DPHY_IN_1 = IOMUX_PAD(0x0370, 0x005C, 6, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD1__MIPI_HSI_CRL_RX_FLG = IOMUX_PAD(0x0374, 0x0060, 0, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD1__ENET_RGMII_TD1 = IOMUX_PAD(0x0374, 0x0060, 1, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD1__GPIO_6_21 = IOMUX_PAD(0x0374, 0x0060, 5, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD1__MIPI_CORE_DPHY_IN_2 = IOMUX_PAD(0x0374, 0x0060, 6, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD1__CCM_PLL3_BYP = IOMUX_PAD(0x0374, 0x0060, 7, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD2__MIPI_HSI_CRL_RX_DTA = IOMUX_PAD(0x0378, 0x0064, 0, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD2__ENET_RGMII_TD2 = IOMUX_PAD(0x0378, 0x0064, 1, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD2__GPIO_6_22 = IOMUX_PAD(0x0378, 0x0064, 5, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD2__MIPI_CORE_DPHY_IN_3 = IOMUX_PAD(0x0378, 0x0064, 6, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD2__CCM_PLL2_BYP = IOMUX_PAD(0x0378, 0x0064, 7, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD3__MIPI_HSI_CRL_RX_WAK = IOMUX_PAD(0x037C, 0x0068, 0, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD3__ENET_RGMII_TD3 = IOMUX_PAD(0x037C, 0x0068, 1, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD3__GPIO_6_23 = IOMUX_PAD(0x037C, 0x0068, 5, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD3__MIPI_CORE_DPHY_IN_4 = IOMUX_PAD(0x037C, 0x0068, 6, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RX_CTL__USBOH3_H3_DATA = IOMUX_PAD(0x0380, 0x006C, 0, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL = IOMUX_PAD(0x0380, 0x006C, 1, 0x0858, 0, 0),
+ MX6_PAD_RGMII_RX_CTL__GPIO_6_24 = IOMUX_PAD(0x0380, 0x006C, 5, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RX_CTL__MIPI_DPHY_IN_5 = IOMUX_PAD(0x0380, 0x006C, 6, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RD0__MIPI_HSI_CRL_RX_RDY = IOMUX_PAD(0x0384, 0x0070, 0, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RD0__ENET_RGMII_RD0 = IOMUX_PAD(0x0384, 0x0070, 1, 0x0848, 0, 0),
+ MX6_PAD_RGMII_RD0__GPIO_6_25 = IOMUX_PAD(0x0384, 0x0070, 5, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RD0__MIPI_CORE_DPHY_IN_6 = IOMUX_PAD(0x0384, 0x0070, 6, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TX_CTL__USBOH3_H2_STROBE = IOMUX_PAD(0x0388, 0x0074, 0, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL = IOMUX_PAD(0x0388, 0x0074, 1, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TX_CTL__GPIO_6_26 = IOMUX_PAD(0x0388, 0x0074, 5, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TX_CTL__CORE_DPHY_IN_7 = IOMUX_PAD(0x0388, 0x0074, 6, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TX_CTL__ANATOP_REF_OUT = IOMUX_PAD(0x0388, 0x0074, 7, 0x083C, 0, 0),
+ MX6_PAD_RGMII_RD1__MIPI_HSI_CTRL_TX_FL = IOMUX_PAD(0x038C, 0x0078, 0, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RD1__ENET_RGMII_RD1 = IOMUX_PAD(0x038C, 0x0078, 1, 0x084C, 0, 0),
+ MX6_PAD_RGMII_RD1__GPIO_6_27 = IOMUX_PAD(0x038C, 0x0078, 5, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RD1__CORE_DPHY_TEST_IN_8 = IOMUX_PAD(0x038C, 0x0078, 6, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RD1__SJC_FAIL = IOMUX_PAD(0x038C, 0x0078, 7, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RD2__MIPI_HSI_CRL_TX_DTA = IOMUX_PAD(0x0390, 0x007C, 0, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RD2__ENET_RGMII_RD2 = IOMUX_PAD(0x0390, 0x007C, 1, 0x0850, 0, 0),
+ MX6_PAD_RGMII_RD2__GPIO_6_28 = IOMUX_PAD(0x0390, 0x007C, 5, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RD2__MIPI_CORE_DPHY_IN_9 = IOMUX_PAD(0x0390, 0x007C, 6, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RD3__MIPI_HSI_CRL_TX_WAK = IOMUX_PAD(0x0394, 0x0080, 0, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RD3__ENET_RGMII_RD3 = IOMUX_PAD(0x0394, 0x0080, 1, 0x0854, 0, 0),
+ MX6_PAD_RGMII_RD3__GPIO_6_29 = IOMUX_PAD(0x0394, 0x0080, 5, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RD3__MIPI_CORE_DPHY_IN10 = IOMUX_PAD(0x0394, 0x0080, 6, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RXC__USBOH3_H3_STROBE = IOMUX_PAD(0x0398, 0x0084, 0, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RXC__ENET_RGMII_RXC = IOMUX_PAD(0x0398, 0x0084, 1, 0x0844, 0, 0),
+ MX6_PAD_RGMII_RXC__GPIO_6_30 = IOMUX_PAD(0x0398, 0x0084, 5, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RXC__MIPI_CORE_DPHY_IN11 = IOMUX_PAD(0x0398, 0x0084, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_A25__WEIM_WEIM_A_25 = IOMUX_PAD(0x039C, 0x0088, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_A25__ECSPI4_SS1 = IOMUX_PAD(0x039C, 0x0088, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_A25__ECSPI2_RDY = IOMUX_PAD(0x039C, 0x0088, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_A25__IPU1_DI1_PIN12 = IOMUX_PAD(0x039C, 0x0088, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_A25__IPU1_DI0_D1_CS = IOMUX_PAD(0x039C, 0x0088, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_A25__GPIO_5_2 = IOMUX_PAD(0x039C, 0x0088, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_A25__HDMI_TX_CEC_LINE = IOMUX_PAD(0x039C, 0x0088, 6, 0x088C, 0, 0),
+ MX6_PAD_EIM_A25__PL301_PER1_HBURST_0 = IOMUX_PAD(0x039C, 0x0088, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB2__WEIM_WEIM_EB_2 = IOMUX_PAD(0x03A0, 0x008C, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB2__ECSPI1_SS0 = IOMUX_PAD(0x03A0, 0x008C, 1, 0x0800, 0, 0),
+ MX6_PAD_EIM_EB2__CCM_DI1_EXT_CLK = IOMUX_PAD(0x03A0, 0x008C, 2, 0x07EC, 0, 0),
+ MX6_PAD_EIM_EB2__IPU2_CSI1_D_19 = IOMUX_PAD(0x03A0, 0x008C, 3, 0x08D4, 0, 0),
+ MX6_PAD_EIM_EB2__HDMI_TX_DDC_SCL = IOMUX_PAD(0x03A0, 0x008C, 4, 0x0890, 0, 0),
+ MX6_PAD_EIM_EB2__GPIO_2_30 = IOMUX_PAD(0x03A0, 0x008C, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB2__I2C2_SCL = IOMUX_PAD(0x03A0, 0x008C, 22, 0x08A0, 0, 0),
+ MX6_PAD_EIM_EB2__SRC_BT_CFG_30 = IOMUX_PAD(0x03A0, 0x008C, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_D16__WEIM_WEIM_D_16 = IOMUX_PAD(0x03A4, 0x0090, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_D16__ECSPI1_SCLK = IOMUX_PAD(0x03A4, 0x0090, 1, 0x07F4, 0, 0),
+ MX6_PAD_EIM_D16__IPU1_DI0_PIN5 = IOMUX_PAD(0x03A4, 0x0090, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_D16__IPU2_CSI1_D_18 = IOMUX_PAD(0x03A4, 0x0090, 3, 0x08D0, 0, 0),
+ MX6_PAD_EIM_D16__HDMI_TX_DDC_SDA = IOMUX_PAD(0x03A4, 0x0090, 4, 0x0894, 0, 0),
+ MX6_PAD_EIM_D16__GPIO_3_16 = IOMUX_PAD(0x03A4, 0x0090, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D16__I2C2_SDA = IOMUX_PAD(0x03A4, 0x0090, 22, 0x08A4, 0, 0),
+ MX6_PAD_EIM_D17__WEIM_WEIM_D_17 = IOMUX_PAD(0x03A8, 0x0094, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_D17__ECSPI1_MISO = IOMUX_PAD(0x03A8, 0x0094, 1, 0x07F8, 0, 0),
+ MX6_PAD_EIM_D17__IPU1_DI0_PIN6 = IOMUX_PAD(0x03A8, 0x0094, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_D17__IPU2_CSI1_PIXCLK = IOMUX_PAD(0x03A8, 0x0094, 3, 0x08E0, 0, 0),
+ MX6_PAD_EIM_D17__DCIC1_DCIC_OUT = IOMUX_PAD(0x03A8, 0x0094, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_D17__GPIO_3_17 = IOMUX_PAD(0x03A8, 0x0094, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D17__I2C3_SCL = IOMUX_PAD(0x03A8, 0x0094, 22, 0x08A8, 0, 0),
+ MX6_PAD_EIM_D17__PL301_PER1_HBURST_1 = IOMUX_PAD(0x03A8, 0x0094, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_D18__WEIM_WEIM_D_18 = IOMUX_PAD(0x03AC, 0x0098, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_D18__ECSPI1_MOSI = IOMUX_PAD(0x03AC, 0x0098, 1, 0x07FC, 0, 0),
+ MX6_PAD_EIM_D18__IPU1_DI0_PIN7 = IOMUX_PAD(0x03AC, 0x0098, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_D18__IPU2_CSI1_D_17 = IOMUX_PAD(0x03AC, 0x0098, 3, 0x08CC, 0, 0),
+ MX6_PAD_EIM_D18__IPU1_DI1_D0_CS = IOMUX_PAD(0x03AC, 0x0098, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_D18__GPIO_3_18 = IOMUX_PAD(0x03AC, 0x0098, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D18__I2C3_SDA = IOMUX_PAD(0x03AC, 0x0098, 22, 0x08AC, 0, 0),
+ MX6_PAD_EIM_D18__PL301_PER1_HBURST_2 = IOMUX_PAD(0x03AC, 0x0098, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_D19__WEIM_WEIM_D_19 = IOMUX_PAD(0x03B0, 0x009C, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_D19__ECSPI1_SS1 = IOMUX_PAD(0x03B0, 0x009C, 1, 0x0804, 0, 0),
+ MX6_PAD_EIM_D19__IPU1_DI0_PIN8 = IOMUX_PAD(0x03B0, 0x009C, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_D19__IPU2_CSI1_D_16 = IOMUX_PAD(0x03B0, 0x009C, 3, 0x08C8, 0, 0),
+ MX6_PAD_EIM_D19__UART1_CTS = IOMUX_PAD(0x03B0, 0x009C, 4, 0x091C, 0, 0),
+ MX6_PAD_EIM_D19__GPIO_3_19 = IOMUX_PAD(0x03B0, 0x009C, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D19__EPIT1_EPITO = IOMUX_PAD(0x03B0, 0x009C, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_D19__PL301MX6QPER1_HRESP = IOMUX_PAD(0x03B0, 0x009C, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_D20__WEIM_WEIM_D_20 = IOMUX_PAD(0x03B4, 0x00A0, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_D20__ECSPI4_SS0 = IOMUX_PAD(0x03B4, 0x00A0, 1, 0x0824, 0, 0),
+ MX6_PAD_EIM_D20__IPU1_DI0_PIN16 = IOMUX_PAD(0x03B4, 0x00A0, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_D20__IPU2_CSI1_D_15 = IOMUX_PAD(0x03B4, 0x00A0, 3, 0x08C4, 0, 0),
+ MX6_PAD_EIM_D20__UART1_CTS = IOMUX_PAD(0x03B4, 0x00A0, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_D20__UART1_RTS = IOMUX_PAD(0x03B4, 0x00A0, 4, 0x091C, 1, 0),
+ MX6_PAD_EIM_D20__GPIO_3_20 = IOMUX_PAD(0x03B4, 0x00A0, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D20__EPIT2_EPITO = IOMUX_PAD(0x03B4, 0x00A0, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_D21__WEIM_WEIM_D_21 = IOMUX_PAD(0x03B8, 0x00A4, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_D21__ECSPI4_SCLK = IOMUX_PAD(0x03B8, 0x00A4, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_D21__IPU1_DI0_PIN17 = IOMUX_PAD(0x03B8, 0x00A4, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_D21__IPU2_CSI1_D_11 = IOMUX_PAD(0x03B8, 0x00A4, 3, 0x08B4, 0, 0),
+ MX6_PAD_EIM_D21__USBOH3_USBOTG_OC = IOMUX_PAD(0x03B8, 0x00A4, 4, 0x0944, 0, 0),
+ MX6_PAD_EIM_D21__GPIO_3_21 = IOMUX_PAD(0x03B8, 0x00A4, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D21__I2C1_SCL = IOMUX_PAD(0x03B8, 0x00A4, 22, 0x0898, 0, 0),
+ MX6_PAD_EIM_D21__SPDIF_IN1 = IOMUX_PAD(0x03B8, 0x00A4, 7, 0x0914, 0, 0),
+ MX6_PAD_EIM_D22__WEIM_WEIM_D_22 = IOMUX_PAD(0x03BC, 0x00A8, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_D22__ECSPI4_MISO = IOMUX_PAD(0x03BC, 0x00A8, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_D22__IPU1_DI0_PIN1 = IOMUX_PAD(0x03BC, 0x00A8, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_D22__IPU2_CSI1_D_10 = IOMUX_PAD(0x03BC, 0x00A8, 3, 0x08B0, 0, 0),
+ MX6_PAD_EIM_D22__USBOH3_USBOTG_PWR = IOMUX_PAD(0x03BC, 0x00A8, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_D22__GPIO_3_22 = IOMUX_PAD(0x03BC, 0x00A8, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D22__SPDIF_OUT1 = IOMUX_PAD(0x03BC, 0x00A8, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_D22__PL301MX6QPER1_HWRITE = IOMUX_PAD(0x03BC, 0x00A8, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_D23__WEIM_WEIM_D_23 = IOMUX_PAD(0x03C0, 0x00AC, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_D23__IPU1_DI0_D0_CS = IOMUX_PAD(0x03C0, 0x00AC, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_D23__UART3_CTS = IOMUX_PAD(0x03C0, 0x00AC, 2, 0x092C, 0, 0),
+ MX6_PAD_EIM_D23__UART1_DCD = IOMUX_PAD(0x03C0, 0x00AC, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_D23__IPU2_CSI1_DATA_EN = IOMUX_PAD(0x03C0, 0x00AC, 4, 0x08D8, 0, 0),
+ MX6_PAD_EIM_D23__GPIO_3_23 = IOMUX_PAD(0x03C0, 0x00AC, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D23__IPU1_DI1_PIN2 = IOMUX_PAD(0x03C0, 0x00AC, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_D23__IPU1_DI1_PIN14 = IOMUX_PAD(0x03C0, 0x00AC, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB3__WEIM_WEIM_EB_3 = IOMUX_PAD(0x03C4, 0x00B0, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB3__ECSPI4_RDY = IOMUX_PAD(0x03C4, 0x00B0, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB3__UART3_CTS = IOMUX_PAD(0x03C4, 0x00B0, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB3__UART3_RTS = IOMUX_PAD(0x03C4, 0x00B0, 2, 0x092C, 1, 0),
+ MX6_PAD_EIM_EB3__UART1_RI = IOMUX_PAD(0x03C4, 0x00B0, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB3__IPU2_CSI1_HSYNC = IOMUX_PAD(0x03C4, 0x00B0, 4, 0x08DC, 0, 0),
+ MX6_PAD_EIM_EB3__GPIO_2_31 = IOMUX_PAD(0x03C4, 0x00B0, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB3__IPU1_DI1_PIN3 = IOMUX_PAD(0x03C4, 0x00B0, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB3__SRC_BT_CFG_31 = IOMUX_PAD(0x03C4, 0x00B0, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_D24__WEIM_WEIM_D_24 = IOMUX_PAD(0x03C8, 0x00B4, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_D24__ECSPI4_SS2 = IOMUX_PAD(0x03C8, 0x00B4, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_D24__UART3_TXD = IOMUX_PAD(0x03C8, 0x00B4, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_D24__UART3_TXD_RXD = IOMUX_PAD(0x03C8, 0x00B4, 2, 0x0930, 0, 0),
+ MX6_PAD_EIM_D24__ECSPI1_SS2 = IOMUX_PAD(0x03C8, 0x00B4, 3, 0x0808, 0, 0),
+ MX6_PAD_EIM_D24__ECSPI2_SS2 = IOMUX_PAD(0x03C8, 0x00B4, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_D24__GPIO_3_24 = IOMUX_PAD(0x03C8, 0x00B4, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D24__AUDMUX_AUD5_RXFS = IOMUX_PAD(0x03C8, 0x00B4, 6, 0x07D8, 0, 0),
+ MX6_PAD_EIM_D24__UART1_DTR = IOMUX_PAD(0x03C8, 0x00B4, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_D25__WEIM_WEIM_D_25 = IOMUX_PAD(0x03CC, 0x00B8, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_D25__ECSPI4_SS3 = IOMUX_PAD(0x03CC, 0x00B8, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_D25__UART3_RXD = IOMUX_PAD(0x03CC, 0x00B8, 2, 0x0930, 1, 0),
+ MX6_PAD_EIM_D25__ECSPI1_SS3 = IOMUX_PAD(0x03CC, 0x00B8, 3, 0x080C, 0, 0),
+ MX6_PAD_EIM_D25__ECSPI2_SS3 = IOMUX_PAD(0x03CC, 0x00B8, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_D25__GPIO_3_25 = IOMUX_PAD(0x03CC, 0x00B8, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D25__AUDMUX_AUD5_RXC = IOMUX_PAD(0x03CC, 0x00B8, 6, 0x07D4, 0, 0),
+ MX6_PAD_EIM_D25__UART1_DSR = IOMUX_PAD(0x03CC, 0x00B8, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_D26__WEIM_WEIM_D_26 = IOMUX_PAD(0x03D0, 0x00BC, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_D26__IPU1_DI1_PIN11 = IOMUX_PAD(0x03D0, 0x00BC, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_D26__IPU1_CSI0_D_1 = IOMUX_PAD(0x03D0, 0x00BC, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_D26__IPU2_CSI1_D_14 = IOMUX_PAD(0x03D0, 0x00BC, 3, 0x08C0, 0, 0),
+ MX6_PAD_EIM_D26__UART2_TXD = IOMUX_PAD(0x03D0, 0x00BC, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_D26__UART2_TXD_RXD = IOMUX_PAD(0x03D0, 0x00BC, 4, 0x0928, 0, 0),
+ MX6_PAD_EIM_D26__GPIO_3_26 = IOMUX_PAD(0x03D0, 0x00BC, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D26__IPU1_SISG_2 = IOMUX_PAD(0x03D0, 0x00BC, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_D26__IPU1_DISP1_DAT_22 = IOMUX_PAD(0x03D0, 0x00BC, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_D27__WEIM_WEIM_D_27 = IOMUX_PAD(0x03D4, 0x00C0, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_D27__IPU1_DI1_PIN13 = IOMUX_PAD(0x03D4, 0x00C0, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_D27__IPU1_CSI0_D_0 = IOMUX_PAD(0x03D4, 0x00C0, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_D27__IPU2_CSI1_D_13 = IOMUX_PAD(0x03D4, 0x00C0, 3, 0x08BC, 0, 0),
+ MX6_PAD_EIM_D27__UART2_RXD = IOMUX_PAD(0x03D4, 0x00C0, 4, 0x0928, 1, 0),
+ MX6_PAD_EIM_D27__GPIO_3_27 = IOMUX_PAD(0x03D4, 0x00C0, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D27__IPU1_SISG_3 = IOMUX_PAD(0x03D4, 0x00C0, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_D27__IPU1_DISP1_DAT_23 = IOMUX_PAD(0x03D4, 0x00C0, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_D28__WEIM_WEIM_D_28 = IOMUX_PAD(0x03D8, 0x00C4, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_D28__I2C1_SDA = IOMUX_PAD(0x03D8, 0x00C4, 17, 0x089C, 0, 0),
+ MX6_PAD_EIM_D28__ECSPI4_MOSI = IOMUX_PAD(0x03D8, 0x00C4, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_D28__IPU2_CSI1_D_12 = IOMUX_PAD(0x03D8, 0x00C4, 3, 0x08B8, 0, 0),
+ MX6_PAD_EIM_D28__UART2_CTS = IOMUX_PAD(0x03D8, 0x00C4, 4, 0x0924, 0, 0),
+ MX6_PAD_EIM_D28__GPIO_3_28 = IOMUX_PAD(0x03D8, 0x00C4, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D28__IPU1_EXT_TRIG = IOMUX_PAD(0x03D8, 0x00C4, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_D28__IPU1_DI0_PIN13 = IOMUX_PAD(0x03D8, 0x00C4, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_D29__WEIM_WEIM_D_29 = IOMUX_PAD(0x03DC, 0x00C8, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_D29__IPU1_DI1_PIN15 = IOMUX_PAD(0x03DC, 0x00C8, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_D29__ECSPI4_SS0 = IOMUX_PAD(0x03DC, 0x00C8, 2, 0x0824, 1, 0),
+ MX6_PAD_EIM_D29__UART2_CTS = IOMUX_PAD(0x03DC, 0x00C8, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_D29__UART2_RTS = IOMUX_PAD(0x03DC, 0x00C8, 4, 0x0924, 1, 0),
+ MX6_PAD_EIM_D29__GPIO_3_29 = IOMUX_PAD(0x03DC, 0x00C8, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D29__IPU2_CSI1_VSYNC = IOMUX_PAD(0x03DC, 0x00C8, 6, 0x08E4, 0, 0),
+ MX6_PAD_EIM_D29__IPU1_DI0_PIN14 = IOMUX_PAD(0x03DC, 0x00C8, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_D30__WEIM_WEIM_D_30 = IOMUX_PAD(0x03E0, 0x00CC, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_D30__IPU1_DISP1_DAT_21 = IOMUX_PAD(0x03E0, 0x00CC, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_D30__IPU1_DI0_PIN11 = IOMUX_PAD(0x03E0, 0x00CC, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_D30__IPU1_CSI0_D_3 = IOMUX_PAD(0x03E0, 0x00CC, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_D30__UART3_CTS = IOMUX_PAD(0x03E0, 0x00CC, 4, 0x092C, 2, 0),
+ MX6_PAD_EIM_D30__GPIO_3_30 = IOMUX_PAD(0x03E0, 0x00CC, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D30__USBOH3_USBH1_OC = IOMUX_PAD(0x03E0, 0x00CC, 6, 0x0948, 0, 0),
+ MX6_PAD_EIM_D30__PL301MX6QPER1_HPROT_0 = IOMUX_PAD(0x03E0, 0x00CC, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_D31__WEIM_WEIM_D_31 = IOMUX_PAD(0x03E4, 0x00D0, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_D31__IPU1_DISP1_DAT_20 = IOMUX_PAD(0x03E4, 0x00D0, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_D31__IPU1_DI0_PIN12 = IOMUX_PAD(0x03E4, 0x00D0, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_D31__IPU1_CSI0_D_2 = IOMUX_PAD(0x03E4, 0x00D0, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_D31__UART3_CTS = IOMUX_PAD(0x03E4, 0x00D0, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_D31__UART3_RTS = IOMUX_PAD(0x03E4, 0x00D0, 4, 0x092C, 3, 0),
+ MX6_PAD_EIM_D31__GPIO_3_31 = IOMUX_PAD(0x03E4, 0x00D0, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D31__USBOH3_USBH1_PWR = IOMUX_PAD(0x03E4, 0x00D0, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_D31__PL301MX6QPER1_HPROT_1 = IOMUX_PAD(0x03E4, 0x00D0, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_A24__WEIM_WEIM_A_24 = IOMUX_PAD(0x03E8, 0x00D4, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_A24__IPU1_DISP1_DAT_19 = IOMUX_PAD(0x03E8, 0x00D4, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_A24__IPU2_CSI1_D_19 = IOMUX_PAD(0x03E8, 0x00D4, 2, 0x08D4, 1, 0),
+ MX6_PAD_EIM_A24__IPU2_SISG_2 = IOMUX_PAD(0x03E8, 0x00D4, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_A24__IPU1_SISG_2 = IOMUX_PAD(0x03E8, 0x00D4, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_A24__GPIO_5_4 = IOMUX_PAD(0x03E8, 0x00D4, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_A24__PL301MX6QPER1_HPROT_2 = IOMUX_PAD(0x03E8, 0x00D4, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_A24__SRC_BT_CFG_24 = IOMUX_PAD(0x03E8, 0x00D4, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_A23__WEIM_WEIM_A_23 = IOMUX_PAD(0x03EC, 0x00D8, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_A23__IPU1_DISP1_DAT_18 = IOMUX_PAD(0x03EC, 0x00D8, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_A23__IPU2_CSI1_D_18 = IOMUX_PAD(0x03EC, 0x00D8, 2, 0x08D0, 1, 0),
+ MX6_PAD_EIM_A23__IPU2_SISG_3 = IOMUX_PAD(0x03EC, 0x00D8, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_A23__IPU1_SISG_3 = IOMUX_PAD(0x03EC, 0x00D8, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_A23__GPIO_6_6 = IOMUX_PAD(0x03EC, 0x00D8, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_A23__PL301MX6QPER1_HPROT_3 = IOMUX_PAD(0x03EC, 0x00D8, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_A23__SRC_BT_CFG_23 = IOMUX_PAD(0x03EC, 0x00D8, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_A22__WEIM_WEIM_A_22 = IOMUX_PAD(0x03F0, 0x00DC, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_A22__IPU1_DISP1_DAT_17 = IOMUX_PAD(0x03F0, 0x00DC, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_A22__IPU2_CSI1_D_17 = IOMUX_PAD(0x03F0, 0x00DC, 2, 0x08CC, 1, 0),
+ MX6_PAD_EIM_A22__GPIO_2_16 = IOMUX_PAD(0x03F0, 0x00DC, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_A22__TPSMP_HDATA_0 = IOMUX_PAD(0x03F0, 0x00DC, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_A22__SRC_BT_CFG_22 = IOMUX_PAD(0x03F0, 0x00DC, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_A21__WEIM_WEIM_A_21 = IOMUX_PAD(0x03F4, 0x00E0, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_A21__IPU1_DISP1_DAT_16 = IOMUX_PAD(0x03F4, 0x00E0, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_A21__IPU2_CSI1_D_16 = IOMUX_PAD(0x03F4, 0x00E0, 2, 0x08C8, 1, 0),
+ MX6_PAD_EIM_A21__RESERVED_RESERVED = IOMUX_PAD(0x03F4, 0x00E0, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_A21__MIPI_CORE_DPHY_OUT_18 = IOMUX_PAD(0x03F4, 0x00E0, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_A21__GPIO_2_17 = IOMUX_PAD(0x03F4, 0x00E0, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_A21__TPSMP_HDATA_1 = IOMUX_PAD(0x03F4, 0x00E0, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_A21__SRC_BT_CFG_21 = IOMUX_PAD(0x03F4, 0x00E0, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_A20__WEIM_WEIM_A_20 = IOMUX_PAD(0x03F8, 0x00E4, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_A20__IPU1_DISP1_DAT_15 = IOMUX_PAD(0x03F8, 0x00E4, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_A20__IPU2_CSI1_D_15 = IOMUX_PAD(0x03F8, 0x00E4, 2, 0x08C4, 1, 0),
+ MX6_PAD_EIM_A20__RESERVED_RESERVED = IOMUX_PAD(0x03F8, 0x00E4, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_A20__MIPI_CORE_DPHY_OUT_19 = IOMUX_PAD(0x03F8, 0x00E4, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_A20__GPIO_2_18 = IOMUX_PAD(0x03F8, 0x00E4, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_A20__TPSMP_HDATA_2 = IOMUX_PAD(0x03F8, 0x00E4, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_A20__SRC_BT_CFG_20 = IOMUX_PAD(0x03F8, 0x00E4, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_A19__WEIM_WEIM_A_19 = IOMUX_PAD(0x03FC, 0x00E8, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_A19__IPU1_DISP1_DAT_14 = IOMUX_PAD(0x03FC, 0x00E8, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_A19__IPU2_CSI1_D_14 = IOMUX_PAD(0x03FC, 0x00E8, 2, 0x08C0, 1, 0),
+ MX6_PAD_EIM_A19__RESERVED_RESERVED = IOMUX_PAD(0x03FC, 0x00E8, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_A19__MIPI_CORE_DPHY_OUT_20 = IOMUX_PAD(0x03FC, 0x00E8, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_A19__GPIO_2_19 = IOMUX_PAD(0x03FC, 0x00E8, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_A19__TPSMP_HDATA_3 = IOMUX_PAD(0x03FC, 0x00E8, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_A19__SRC_BT_CFG_19 = IOMUX_PAD(0x03FC, 0x00E8, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_A18__WEIM_WEIM_A_18 = IOMUX_PAD(0x0400, 0x00EC, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_A18__IPU1_DISP1_DAT_13 = IOMUX_PAD(0x0400, 0x00EC, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_A18__IPU2_CSI1_D_13 = IOMUX_PAD(0x0400, 0x00EC, 2, 0x08BC, 1, 0),
+ MX6_PAD_EIM_A18__RESERVED_RESERVED = IOMUX_PAD(0x0400, 0x00EC, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_A18__MIPI_CORE_DPHY_OUT_21 = IOMUX_PAD(0x0400, 0x00EC, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_A18__GPIO_2_20 = IOMUX_PAD(0x0400, 0x00EC, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_A18__TPSMP_HDATA_4 = IOMUX_PAD(0x0400, 0x00EC, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_A18__SRC_BT_CFG_18 = IOMUX_PAD(0x0400, 0x00EC, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_A17__WEIM_WEIM_A_17 = IOMUX_PAD(0x0404, 0x00F0, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_A17__IPU1_DISP1_DAT_12 = IOMUX_PAD(0x0404, 0x00F0, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_A17__IPU2_CSI1_D_12 = IOMUX_PAD(0x0404, 0x00F0, 2, 0x08B8, 1, 0),
+ MX6_PAD_EIM_A17__RESERVED_RESERVED = IOMUX_PAD(0x0404, 0x00F0, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_A17__MIPI_CORE_DPHY_OUT_22 = IOMUX_PAD(0x0404, 0x00F0, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_A17__GPIO_2_21 = IOMUX_PAD(0x0404, 0x00F0, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_A17__TPSMP_HDATA_5 = IOMUX_PAD(0x0404, 0x00F0, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_A17__SRC_BT_CFG_17 = IOMUX_PAD(0x0404, 0x00F0, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_A16__WEIM_WEIM_A_16 = IOMUX_PAD(0x0408, 0x00F4, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_A16__IPU1_DI1_DISP_CLK = IOMUX_PAD(0x0408, 0x00F4, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_A16__IPU2_CSI1_PIXCLK = IOMUX_PAD(0x0408, 0x00F4, 2, 0x08E0, 1, 0),
+ MX6_PAD_EIM_A16__MIPI_CORE_DPHY_OUT_23 = IOMUX_PAD(0x0408, 0x00F4, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_A16__GPIO_2_22 = IOMUX_PAD(0x0408, 0x00F4, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_A16__TPSMP_HDATA_6 = IOMUX_PAD(0x0408, 0x00F4, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_A16__SRC_BT_CFG_16 = IOMUX_PAD(0x0408, 0x00F4, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_CS0__WEIM_WEIM_CS_0 = IOMUX_PAD(0x040C, 0x00F8, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_CS0__IPU1_DI1_PIN5 = IOMUX_PAD(0x040C, 0x00F8, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_CS0__ECSPI2_SCLK = IOMUX_PAD(0x040C, 0x00F8, 2, 0x0810, 0, 0),
+ MX6_PAD_EIM_CS0__MIPI_CORE_DPHY_OUT_24 = IOMUX_PAD(0x040C, 0x00F8, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_CS0__GPIO_2_23 = IOMUX_PAD(0x040C, 0x00F8, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_CS0__TPSMP_HDATA_7 = IOMUX_PAD(0x040C, 0x00F8, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_CS1__WEIM_WEIM_CS_1 = IOMUX_PAD(0x0410, 0x00FC, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_CS1__IPU1_DI1_PIN6 = IOMUX_PAD(0x0410, 0x00FC, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_CS1__ECSPI2_MOSI = IOMUX_PAD(0x0410, 0x00FC, 2, 0x0818, 0, 0),
+ MX6_PAD_EIM_CS1__MIPI_CORE_DPHY_OUT_25 = IOMUX_PAD(0x0410, 0x00FC, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_CS1__GPIO_2_24 = IOMUX_PAD(0x0410, 0x00FC, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_CS1__TPSMP_HDATA_8 = IOMUX_PAD(0x0410, 0x00FC, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_OE__WEIM_WEIM_OE = IOMUX_PAD(0x0414, 0x0100, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_OE__IPU1_DI1_PIN7 = IOMUX_PAD(0x0414, 0x0100, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_OE__ECSPI2_MISO = IOMUX_PAD(0x0414, 0x0100, 2, 0x0814, 0, 0),
+ MX6_PAD_EIM_OE__MIPI_CORE_DPHY_OUT_26 = IOMUX_PAD(0x0414, 0x0100, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_OE__GPIO_2_25 = IOMUX_PAD(0x0414, 0x0100, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_OE__TPSMP_HDATA_9 = IOMUX_PAD(0x0414, 0x0100, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_RW__WEIM_WEIM_RW = IOMUX_PAD(0x0418, 0x0104, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_RW__IPU1_DI1_PIN8 = IOMUX_PAD(0x0418, 0x0104, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_RW__ECSPI2_SS0 = IOMUX_PAD(0x0418, 0x0104, 2, 0x081C, 0, 0),
+ MX6_PAD_EIM_RW__MIPI_CORE_DPHY_OUT_27 = IOMUX_PAD(0x0418, 0x0104, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_RW__GPIO_2_26 = IOMUX_PAD(0x0418, 0x0104, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_RW__TPSMP_HDATA_10 = IOMUX_PAD(0x0418, 0x0104, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_RW__SRC_BT_CFG_29 = IOMUX_PAD(0x0418, 0x0104, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_LBA__WEIM_WEIM_LBA = IOMUX_PAD(0x041C, 0x0108, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_LBA__IPU1_DI1_PIN17 = IOMUX_PAD(0x041C, 0x0108, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_LBA__ECSPI2_SS1 = IOMUX_PAD(0x041C, 0x0108, 2, 0x0820, 0, 0),
+ MX6_PAD_EIM_LBA__GPIO_2_27 = IOMUX_PAD(0x041C, 0x0108, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_LBA__TPSMP_HDATA_11 = IOMUX_PAD(0x041C, 0x0108, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_LBA__SRC_BT_CFG_26 = IOMUX_PAD(0x041C, 0x0108, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB0__WEIM_WEIM_EB_0 = IOMUX_PAD(0x0420, 0x010C, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB0__IPU1_DISP1_DAT_11 = IOMUX_PAD(0x0420, 0x010C, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB0__IPU2_CSI1_D_11 = IOMUX_PAD(0x0420, 0x010C, 2, 0x08B4, 1, 0),
+ MX6_PAD_EIM_EB0__MIPI_CORE_DPHY_OUT_0 = IOMUX_PAD(0x0420, 0x010C, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB0__CCM_PMIC_RDY = IOMUX_PAD(0x0420, 0x010C, 4, 0x07F0, 0, 0),
+ MX6_PAD_EIM_EB0__GPIO_2_28 = IOMUX_PAD(0x0420, 0x010C, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB0__TPSMP_HDATA_12 = IOMUX_PAD(0x0420, 0x010C, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB0__SRC_BT_CFG_27 = IOMUX_PAD(0x0420, 0x010C, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB1__WEIM_WEIM_EB_1 = IOMUX_PAD(0x0424, 0x0110, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB1__IPU1_DISP1_DAT_10 = IOMUX_PAD(0x0424, 0x0110, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB1__IPU2_CSI1_D_10 = IOMUX_PAD(0x0424, 0x0110, 2, 0x08B0, 1, 0),
+ MX6_PAD_EIM_EB1__MIPI_CORE_DPHY__OUT_1 = IOMUX_PAD(0x0424, 0x0110, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB1__GPIO_2_29 = IOMUX_PAD(0x0424, 0x0110, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB1__TPSMP_HDATA_13 = IOMUX_PAD(0x0424, 0x0110, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB1__SRC_BT_CFG_28 = IOMUX_PAD(0x0424, 0x0110, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA0__WEIM_WEIM_DA_A_0 = IOMUX_PAD(0x0428, 0x0114, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA0__IPU1_DISP1_DAT_9 = IOMUX_PAD(0x0428, 0x0114, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA0__IPU2_CSI1_D_9 = IOMUX_PAD(0x0428, 0x0114, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA0__MIPI_CORE_DPHY__OUT_2 = IOMUX_PAD(0x0428, 0x0114, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA0__GPIO_3_0 = IOMUX_PAD(0x0428, 0x0114, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA0__TPSMP_HDATA_14 = IOMUX_PAD(0x0428, 0x0114, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA0__SRC_BT_CFG_0 = IOMUX_PAD(0x0428, 0x0114, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA1__WEIM_WEIM_DA_A_1 = IOMUX_PAD(0x042C, 0x0118, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA1__IPU1_DISP1_DAT_8 = IOMUX_PAD(0x042C, 0x0118, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA1__IPU2_CSI1_D_8 = IOMUX_PAD(0x042C, 0x0118, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA1__MIPI_CORE_DPHY_OUT_3 = IOMUX_PAD(0x042C, 0x0118, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA1__USBPHY1_TX_LS_MODE = IOMUX_PAD(0x042C, 0x0118, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA1__GPIO_3_1 = IOMUX_PAD(0x042C, 0x0118, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA1__TPSMP_HDATA_15 = IOMUX_PAD(0x042C, 0x0118, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA1__SRC_BT_CFG_1 = IOMUX_PAD(0x042C, 0x0118, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA2__WEIM_WEIM_DA_A_2 = IOMUX_PAD(0x0430, 0x011C, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA2__IPU1_DISP1_DAT_7 = IOMUX_PAD(0x0430, 0x011C, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA2__IPU2_CSI1_D_7 = IOMUX_PAD(0x0430, 0x011C, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA2__MIPI_CORE_DPHY_OUT_4 = IOMUX_PAD(0x0430, 0x011C, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA2__USBPHY1_TX_HS_MODE = IOMUX_PAD(0x0430, 0x011C, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA2__GPIO_3_2 = IOMUX_PAD(0x0430, 0x011C, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA2__TPSMP_HDATA_16 = IOMUX_PAD(0x0430, 0x011C, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA2__SRC_BT_CFG_2 = IOMUX_PAD(0x0430, 0x011C, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA3__WEIM_WEIM_DA_A_3 = IOMUX_PAD(0x0434, 0x0120, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA3__IPU1_DISP1_DAT_6 = IOMUX_PAD(0x0434, 0x0120, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA3__IPU2_CSI1_D_6 = IOMUX_PAD(0x0434, 0x0120, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA3__MIPI_CORE_DPHY_OUT_5 = IOMUX_PAD(0x0434, 0x0120, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA3__USBPHY1_TX_HIZ = IOMUX_PAD(0x0434, 0x0120, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA3__GPIO_3_3 = IOMUX_PAD(0x0434, 0x0120, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA3__TPSMP_HDATA_17 = IOMUX_PAD(0x0434, 0x0120, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA3__SRC_BT_CFG_3 = IOMUX_PAD(0x0434, 0x0120, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA4__WEIM_WEIM_DA_A_4 = IOMUX_PAD(0x0438, 0x0124, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA4__IPU1_DISP1_DAT_5 = IOMUX_PAD(0x0438, 0x0124, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA4__IPU2_CSI1_D_5 = IOMUX_PAD(0x0438, 0x0124, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA4__MIPI_CORE_DPHY_OUT_6 = IOMUX_PAD(0x0438, 0x0124, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA4__ANATOP_USBPHY1_TX_EN = IOMUX_PAD(0x0438, 0x0124, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA4__GPIO_3_4 = IOMUX_PAD(0x0438, 0x0124, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA4__TPSMP_HDATA_18 = IOMUX_PAD(0x0438, 0x0124, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA4__SRC_BT_CFG_4 = IOMUX_PAD(0x0438, 0x0124, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA5__WEIM_WEIM_DA_A_5 = IOMUX_PAD(0x043C, 0x0128, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA5__IPU1_DISP1_DAT_4 = IOMUX_PAD(0x043C, 0x0128, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA5__IPU2_CSI1_D_4 = IOMUX_PAD(0x043C, 0x0128, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA5__MIPI_CORE_DPHY_OUT_7 = IOMUX_PAD(0x043C, 0x0128, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA5__ANATOP_USBPHY1_TX_DP = IOMUX_PAD(0x043C, 0x0128, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA5__GPIO_3_5 = IOMUX_PAD(0x043C, 0x0128, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA5__TPSMP_HDATA_19 = IOMUX_PAD(0x043C, 0x0128, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA5__SRC_BT_CFG_5 = IOMUX_PAD(0x043C, 0x0128, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA6__WEIM_WEIM_DA_A_6 = IOMUX_PAD(0x0440, 0x012C, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA6__IPU1_DISP1_DAT_3 = IOMUX_PAD(0x0440, 0x012C, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA6__IPU2_CSI1_D_3 = IOMUX_PAD(0x0440, 0x012C, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA6__MIPI_CORE_DPHY_OUT_8 = IOMUX_PAD(0x0440, 0x012C, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA6__ANATOP_USBPHY1_TX_DN = IOMUX_PAD(0x0440, 0x012C, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA6__GPIO_3_6 = IOMUX_PAD(0x0440, 0x012C, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA6__TPSMP_HDATA_20 = IOMUX_PAD(0x0440, 0x012C, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA6__SRC_BT_CFG_6 = IOMUX_PAD(0x0440, 0x012C, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA7__WEIM_WEIM_DA_A_7 = IOMUX_PAD(0x0444, 0x0130, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA7__IPU1_DISP1_DAT_2 = IOMUX_PAD(0x0444, 0x0130, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA7__IPU2_CSI1_D_2 = IOMUX_PAD(0x0444, 0x0130, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA7__MIPI_CORE_DPHY_OUT_9 = IOMUX_PAD(0x0444, 0x0130, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA7__GPIO_3_7 = IOMUX_PAD(0x0444, 0x0130, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA7__TPSMP_HDATA_21 = IOMUX_PAD(0x0444, 0x0130, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA7__SRC_BT_CFG_7 = IOMUX_PAD(0x0444, 0x0130, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA8__WEIM_WEIM_DA_A_8 = IOMUX_PAD(0x0448, 0x0134, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA8__IPU1_DISP1_DAT_1 = IOMUX_PAD(0x0448, 0x0134, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA8__IPU2_CSI1_D_1 = IOMUX_PAD(0x0448, 0x0134, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA8__MIPI_CORE_DPHY_OUT_10 = IOMUX_PAD(0x0448, 0x0134, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA8__GPIO_3_8 = IOMUX_PAD(0x0448, 0x0134, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA8__TPSMP_HDATA_22 = IOMUX_PAD(0x0448, 0x0134, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA8__SRC_BT_CFG_8 = IOMUX_PAD(0x0448, 0x0134, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA9__WEIM_WEIM_DA_A_9 = IOMUX_PAD(0x044C, 0x0138, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA9__IPU1_DISP1_DAT_0 = IOMUX_PAD(0x044C, 0x0138, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA9__IPU2_CSI1_D_0 = IOMUX_PAD(0x044C, 0x0138, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA9__MIPI_CORE_DPHY_OUT_11 = IOMUX_PAD(0x044C, 0x0138, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA9__GPIO_3_9 = IOMUX_PAD(0x044C, 0x0138, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA9__TPSMP_HDATA_23 = IOMUX_PAD(0x044C, 0x0138, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA9__SRC_BT_CFG_9 = IOMUX_PAD(0x044C, 0x0138, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA10__WEIM_WEIM_DA_A_10 = IOMUX_PAD(0x0450, 0x013C, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA10__IPU1_DI1_PIN15 = IOMUX_PAD(0x0450, 0x013C, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA10__IPU2_CSI1_DATA_EN = IOMUX_PAD(0x0450, 0x013C, 2, 0x08D8, 1, 0),
+ MX6_PAD_EIM_DA10__MIPI_CORE_DPHY_OUT12 = IOMUX_PAD(0x0450, 0x013C, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA10__GPIO_3_10 = IOMUX_PAD(0x0450, 0x013C, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA10__TPSMP_HDATA_24 = IOMUX_PAD(0x0450, 0x013C, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA10__SRC_BT_CFG_10 = IOMUX_PAD(0x0450, 0x013C, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA11__WEIM_WEIM_DA_A_11 = IOMUX_PAD(0x0454, 0x0140, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA11__IPU1_DI1_PIN2 = IOMUX_PAD(0x0454, 0x0140, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA11__IPU2_CSI1_HSYNC = IOMUX_PAD(0x0454, 0x0140, 2, 0x08DC, 1, 0),
+ MX6_PAD_EIM_DA11__MIPI_CORE_DPHY_OUT13 = IOMUX_PAD(0x0454, 0x0140, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA11__SDMA_DBG_EVT_CHN_6 = IOMUX_PAD(0x0454, 0x0140, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA11__GPIO_3_11 = IOMUX_PAD(0x0454, 0x0140, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA11__TPSMP_HDATA_25 = IOMUX_PAD(0x0454, 0x0140, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA11__SRC_BT_CFG_11 = IOMUX_PAD(0x0454, 0x0140, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA12__WEIM_WEIM_DA_A_12 = IOMUX_PAD(0x0458, 0x0144, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA12__IPU1_DI1_PIN3 = IOMUX_PAD(0x0458, 0x0144, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA12__IPU2_CSI1_VSYNC = IOMUX_PAD(0x0458, 0x0144, 2, 0x08E4, 1, 0),
+ MX6_PAD_EIM_DA12__MIPI_CORE_DPHY_OUT14 = IOMUX_PAD(0x0458, 0x0144, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA12__SDMA_DEBUG_EVT_CHN_3 = IOMUX_PAD(0x0458, 0x0144, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA12__GPIO_3_12 = IOMUX_PAD(0x0458, 0x0144, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA12__TPSMP_HDATA_26 = IOMUX_PAD(0x0458, 0x0144, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA12__SRC_BT_CFG_12 = IOMUX_PAD(0x0458, 0x0144, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA13__WEIM_WEIM_DA_A_13 = IOMUX_PAD(0x045C, 0x0148, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA13__IPU1_DI1_D0_CS = IOMUX_PAD(0x045C, 0x0148, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA13__CCM_DI1_EXT_CLK = IOMUX_PAD(0x045C, 0x0148, 2, 0x07EC, 1, 0),
+ MX6_PAD_EIM_DA13__MIPI_CORE_DPHY_OUT15 = IOMUX_PAD(0x045C, 0x0148, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA13__SDMA_DEBUG_EVT_CHN_4 = IOMUX_PAD(0x045C, 0x0148, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA13__GPIO_3_13 = IOMUX_PAD(0x045C, 0x0148, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA13__TPSMP_HDATA_27 = IOMUX_PAD(0x045C, 0x0148, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA13__SRC_BT_CFG_13 = IOMUX_PAD(0x045C, 0x0148, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA14__WEIM_WEIM_DA_A_14 = IOMUX_PAD(0x0460, 0x014C, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA14__IPU1_DI1_D1_CS = IOMUX_PAD(0x0460, 0x014C, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA14__CCM_DI0_EXT_CLK = IOMUX_PAD(0x0460, 0x014C, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA14__MIPI_CORE_DPHY_OUT16 = IOMUX_PAD(0x0460, 0x014C, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA14__SDMA_DEBUG_EVT_CHN_5 = IOMUX_PAD(0x0460, 0x014C, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA14__GPIO_3_14 = IOMUX_PAD(0x0460, 0x014C, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA14__TPSMP_HDATA_28 = IOMUX_PAD(0x0460, 0x014C, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA14__SRC_BT_CFG_14 = IOMUX_PAD(0x0460, 0x014C, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA15__WEIM_WEIM_DA_A_15 = IOMUX_PAD(0x0464, 0x0150, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA15__IPU1_DI1_PIN1 = IOMUX_PAD(0x0464, 0x0150, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA15__IPU1_DI1_PIN4 = IOMUX_PAD(0x0464, 0x0150, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA15__MIPI_CORE_DPHY_OUT17 = IOMUX_PAD(0x0464, 0x0150, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA15__GPIO_3_15 = IOMUX_PAD(0x0464, 0x0150, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA15__TPSMP_HDATA_29 = IOMUX_PAD(0x0464, 0x0150, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA15__SRC_BT_CFG_15 = IOMUX_PAD(0x0464, 0x0150, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_WAIT__WEIM_WEIM_WAIT = IOMUX_PAD(0x0468, 0x0154, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_WAIT__WEIM_WEIM_DTACK_B = IOMUX_PAD(0x0468, 0x0154, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_WAIT__GPIO_5_0 = IOMUX_PAD(0x0468, 0x0154, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_WAIT__TPSMP_HDATA_30 = IOMUX_PAD(0x0468, 0x0154, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_WAIT__SRC_BT_CFG_25 = IOMUX_PAD(0x0468, 0x0154, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_BCLK__WEIM_WEIM_BCLK = IOMUX_PAD(0x046C, 0x0158, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_BCLK__IPU1_DI1_PIN16 = IOMUX_PAD(0x046C, 0x0158, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_BCLK__GPIO_6_31 = IOMUX_PAD(0x046C, 0x0158, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_BCLK__TPSMP_HDATA_31 = IOMUX_PAD(0x046C, 0x0158, 6, 0x0000, 0, 0),
+ MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 1, 0x0000, 0, 0),
+ MX6_PAD_DI0_DISP_CLK__MIPI_CR_DPY_OT28 = IOMUX_PAD(0x0470, 0x015C, 3, 0x0000, 0, 0),
+ MX6_PAD_DI0_DISP_CLK__SDMA_DBG_CR_STA0 = IOMUX_PAD(0x0470, 0x015C, 4, 0x0000, 0, 0),
+ MX6_PAD_DI0_DISP_CLK__GPIO_4_16 = IOMUX_PAD(0x0470, 0x015C, 5, 0x0000, 0, 0),
+ MX6_PAD_DI0_DISP_CLK__MMDC_DEBUG_0 = IOMUX_PAD(0x0470, 0x015C, 6, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15 = IOMUX_PAD(0x0474, 0x0160, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DI0_PIN15__IPU2_DI0_PIN15 = IOMUX_PAD(0x0474, 0x0160, 1, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN15__AUDMUX_AUD6_TXC = IOMUX_PAD(0x0474, 0x0160, 2, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN15__MIPI_CR_DPHY_OUT_29 = IOMUX_PAD(0x0474, 0x0160, 3, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN15__SDMA_DBG_CORE_STA_1 = IOMUX_PAD(0x0474, 0x0160, 4, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN15__GPIO_4_17 = IOMUX_PAD(0x0474, 0x0160, 5, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN15__MMDC_MMDC_DEBUG_1 = IOMUX_PAD(0x0474, 0x0160, 6, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN2__IPU1_DI0_PIN2 = IOMUX_PAD(0x0478, 0x0164, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DI0_PIN2__IPU2_DI0_PIN2 = IOMUX_PAD(0x0478, 0x0164, 1, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN2__AUDMUX_AUD6_TXD = IOMUX_PAD(0x0478, 0x0164, 2, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN2__MIPI_CR_DPHY_OUT_30 = IOMUX_PAD(0x0478, 0x0164, 3, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN2__SDMA_DBG_CORE_STA_2 = IOMUX_PAD(0x0478, 0x0164, 4, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN2__GPIO_4_18 = IOMUX_PAD(0x0478, 0x0164, 5, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN2__MMDC_DEBUG_2 = IOMUX_PAD(0x0478, 0x0164, 6, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN2__PL301_PER1_HADDR_9 = IOMUX_PAD(0x0478, 0x0164, 7, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN3__IPU1_DI0_PIN3 = IOMUX_PAD(0x047C, 0x0168, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DI0_PIN3__IPU2_DI0_PIN3 = IOMUX_PAD(0x047C, 0x0168, 1, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS = IOMUX_PAD(0x047C, 0x0168, 2, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN3__MIPI_CORE_DPHY_OUT31 = IOMUX_PAD(0x047C, 0x0168, 3, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN3__SDMA_DBG_CORE_STA_3 = IOMUX_PAD(0x047C, 0x0168, 4, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN3__GPIO_4_19 = IOMUX_PAD(0x047C, 0x0168, 5, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN3__MMDC_MMDC_DEBUG_3 = IOMUX_PAD(0x047C, 0x0168, 6, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN3__PL301_PER1_HADDR_10 = IOMUX_PAD(0x047C, 0x0168, 7, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN4__IPU1_DI0_PIN4 = IOMUX_PAD(0x0480, 0x016C, 0, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN4__IPU2_DI0_PIN4 = IOMUX_PAD(0x0480, 0x016C, 1, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN4__AUDMUX_AUD6_RXD = IOMUX_PAD(0x0480, 0x016C, 2, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN4__USDHC1_WP = IOMUX_PAD(0x0480, 0x016C, 3, 0x094C, 0, 0),
+ MX6_PAD_DI0_PIN4__SDMA_DEBUG_YIELD = IOMUX_PAD(0x0480, 0x016C, 4, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN4__GPIO_4_20 = IOMUX_PAD(0x0480, 0x016C, 5, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DI0_PIN4__MMDC_MMDC_DEBUG_4 = IOMUX_PAD(0x0480, 0x016C, 6, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN4__PL301_PER1_HADDR_11 = IOMUX_PAD(0x0480, 0x016C, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0 = IOMUX_PAD(0x0484, 0x0170, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT0__IPU2_DISP0_DAT_0 = IOMUX_PAD(0x0484, 0x0170, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT0__ECSPI3_SCLK = IOMUX_PAD(0x0484, 0x0170, 2, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT0__USDHC1_USDHC_DBG_0 = IOMUX_PAD(0x0484, 0x0170, 3, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT0__SDMA_DBG_CORE_RUN = IOMUX_PAD(0x0484, 0x0170, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT0__GPIO_4_21 = IOMUX_PAD(0x0484, 0x0170, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT0__MMDC_MMDC_DEBUG_5 = IOMUX_PAD(0x0484, 0x0170, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1 = IOMUX_PAD(0x0488, 0x0174, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT1__IPU2_DISP0_DAT_1 = IOMUX_PAD(0x0488, 0x0174, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT1__ECSPI3_MOSI = IOMUX_PAD(0x0488, 0x0174, 2, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT1__USDHC1_USDHC_DBG_1 = IOMUX_PAD(0x0488, 0x0174, 3, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT1__SDMA_DBG_EVT_CHNSL = IOMUX_PAD(0x0488, 0x0174, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT1__GPIO_4_22 = IOMUX_PAD(0x0488, 0x0174, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT1__MMDC_DEBUG_6 = IOMUX_PAD(0x0488, 0x0174, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT1__PL301_PER1_HADR_12 = IOMUX_PAD(0x0488, 0x0174, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2 = IOMUX_PAD(0x048C, 0x0178, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT2__IPU2_DISP0_DAT_2 = IOMUX_PAD(0x048C, 0x0178, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT2__ECSPI3_MISO = IOMUX_PAD(0x048C, 0x0178, 2, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT2__USDHC1_USDHC_DBG_2 = IOMUX_PAD(0x048C, 0x0178, 3, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT2__SDMA_DEBUG_MODE = IOMUX_PAD(0x048C, 0x0178, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT2__GPIO_4_23 = IOMUX_PAD(0x048C, 0x0178, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT2__MMDC_DEBUG_7 = IOMUX_PAD(0x048C, 0x0178, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT2__PL301_PER1_HADR_13 = IOMUX_PAD(0x048C, 0x0178, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3 = IOMUX_PAD(0x0490, 0x017C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT3__IPU2_DISP0_DAT_3 = IOMUX_PAD(0x0490, 0x017C, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT3__ECSPI3_SS0 = IOMUX_PAD(0x0490, 0x017C, 2, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT3__USDHC1_USDHC_DBG_3 = IOMUX_PAD(0x0490, 0x017C, 3, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT3__SDMA_DBG_BUS_ERROR = IOMUX_PAD(0x0490, 0x017C, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT3__GPIO_4_24 = IOMUX_PAD(0x0490, 0x017C, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT3__MMDC_MMDC_DBG_8 = IOMUX_PAD(0x0490, 0x017C, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT3__PL301_PER1_HADR_14 = IOMUX_PAD(0x0490, 0x017C, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4 = IOMUX_PAD(0x0494, 0x0180, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT4__IPU2_DISP0_DAT_4 = IOMUX_PAD(0x0494, 0x0180, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT4__ECSPI3_SS1 = IOMUX_PAD(0x0494, 0x0180, 2, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT4__USDHC1_USDHC_DBG_4 = IOMUX_PAD(0x0494, 0x0180, 3, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB = IOMUX_PAD(0x0494, 0x0180, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT4__GPIO_4_25 = IOMUX_PAD(0x0494, 0x0180, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT4__MMDC_MMDC_DEBUG_9 = IOMUX_PAD(0x0494, 0x0180, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT4__PL301_PER1_HADR_15 = IOMUX_PAD(0x0494, 0x0180, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5 = IOMUX_PAD(0x0498, 0x0184, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT5__IPU2_DISP0_DAT_5 = IOMUX_PAD(0x0498, 0x0184, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT5__ECSPI3_SS2 = IOMUX_PAD(0x0498, 0x0184, 2, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT5__AUDMUX_AUD6_RXFS = IOMUX_PAD(0x0498, 0x0184, 3, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT5__SDMA_DBG_MCH_DMBUS = IOMUX_PAD(0x0498, 0x0184, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT5__GPIO_4_26 = IOMUX_PAD(0x0498, 0x0184, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT5__MMDC_DEBUG_10 = IOMUX_PAD(0x0498, 0x0184, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT5__PL301_PER1_HADR_16 = IOMUX_PAD(0x0498, 0x0184, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6 = IOMUX_PAD(0x049C, 0x0188, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT6__IPU2_DISP0_DAT_6 = IOMUX_PAD(0x049C, 0x0188, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT6__ECSPI3_SS3 = IOMUX_PAD(0x049C, 0x0188, 2, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT6__AUDMUX_AUD6_RXC = IOMUX_PAD(0x049C, 0x0188, 3, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT6__SDMA_DBG_RTBUF_WRT = IOMUX_PAD(0x049C, 0x0188, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT6__GPIO_4_27 = IOMUX_PAD(0x049C, 0x0188, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT6__MMDC_DEBUG_11 = IOMUX_PAD(0x049C, 0x0188, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT6__PL301_PER1_HADR_17 = IOMUX_PAD(0x049C, 0x0188, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7 = IOMUX_PAD(0x04A0, 0x018C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT7__IPU2_DISP0_DAT_7 = IOMUX_PAD(0x04A0, 0x018C, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT7__ECSPI3_RDY = IOMUX_PAD(0x04A0, 0x018C, 2, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT7__USDHC1_USDHC_DBG_5 = IOMUX_PAD(0x04A0, 0x018C, 3, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT7__SDMA_DBG_EVT_CHN_0 = IOMUX_PAD(0x04A0, 0x018C, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT7__GPIO_4_28 = IOMUX_PAD(0x04A0, 0x018C, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT7__MMDC_DEBUG_12 = IOMUX_PAD(0x04A0, 0x018C, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT7__PL301_PER1_HADR_18 = IOMUX_PAD(0x04A0, 0x018C, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8 = IOMUX_PAD(0x04A4, 0x0190, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT8__IPU2_DISP0_DAT_8 = IOMUX_PAD(0x04A4, 0x0190, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT8__PWM1_PWMO = IOMUX_PAD(0x04A4, 0x0190, 2, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT8__WDOG1_WDOG_B = IOMUX_PAD(0x04A4, 0x0190, 3, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT8__SDMA_DBG_EVT_CHN_1 = IOMUX_PAD(0x04A4, 0x0190, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT8__GPIO_4_29 = IOMUX_PAD(0x04A4, 0x0190, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT8__MMDC_DEBUG_13 = IOMUX_PAD(0x04A4, 0x0190, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT8__PL301_PER1_HADR_19 = IOMUX_PAD(0x04A4, 0x0190, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9 = IOMUX_PAD(0x04A8, 0x0194, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT9__IPU2_DISP0_DAT_9 = IOMUX_PAD(0x04A8, 0x0194, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT9__PWM2_PWMO = IOMUX_PAD(0x04A8, 0x0194, 2, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT9__WDOG2_WDOG_B = IOMUX_PAD(0x04A8, 0x0194, 3, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT9__SDMA_DBG_EVT_CHN_2 = IOMUX_PAD(0x04A8, 0x0194, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT9__GPIO_4_30 = IOMUX_PAD(0x04A8, 0x0194, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT9__MMDC_DEBUG_14 = IOMUX_PAD(0x04A8, 0x0194, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT9__PL301_PER1_HADR_20 = IOMUX_PAD(0x04A8, 0x0194, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10 = IOMUX_PAD(0x04AC, 0x0198, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT10__IPU2_DISP0_DAT_10 = IOMUX_PAD(0x04AC, 0x0198, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT10__USDHC1_DBG_6 = IOMUX_PAD(0x04AC, 0x0198, 3, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT10__SDMA_DBG_EVT_CHN3 = IOMUX_PAD(0x04AC, 0x0198, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT10__GPIO_4_31 = IOMUX_PAD(0x04AC, 0x0198, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT10__MMDC_DEBUG_15 = IOMUX_PAD(0x04AC, 0x0198, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT10__PL301_PER1_HADR21 = IOMUX_PAD(0x04AC, 0x0198, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11 = IOMUX_PAD(0x04B0, 0x019C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT11__IPU2_DISP0_DAT_11 = IOMUX_PAD(0x04B0, 0x019C, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT11__USDHC1_USDHC_DBG7 = IOMUX_PAD(0x04B0, 0x019C, 3, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT11__SDMA_DBG_EVT_CHN4 = IOMUX_PAD(0x04B0, 0x019C, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT11__GPIO_5_5 = IOMUX_PAD(0x04B0, 0x019C, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT11__MMDC_DEBUG_16 = IOMUX_PAD(0x04B0, 0x019C, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT11__PL301_PER1_HADR22 = IOMUX_PAD(0x04B0, 0x019C, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12 = IOMUX_PAD(0x04B4, 0x01A0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT12__IPU2_DISP0_DAT_12 = IOMUX_PAD(0x04B4, 0x01A0, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT12__RESERVED_RESERVED = IOMUX_PAD(0x04B4, 0x01A0, 3, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT12__SDMA_DBG_EVT_CHN5 = IOMUX_PAD(0x04B4, 0x01A0, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT12__GPIO_5_6 = IOMUX_PAD(0x04B4, 0x01A0, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT12__MMDC_DEBUG_17 = IOMUX_PAD(0x04B4, 0x01A0, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT12__PL301_PER1_HADR23 = IOMUX_PAD(0x04B4, 0x01A0, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13 = IOMUX_PAD(0x04B8, 0x01A4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT13__IPU2_DISP0_DAT_13 = IOMUX_PAD(0x04B8, 0x01A4, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS = IOMUX_PAD(0x04B8, 0x01A4, 3, 0x07D8, 1, 0),
+ MX6_PAD_DISP0_DAT13__SDMA_DBG_EVT_CHN0 = IOMUX_PAD(0x04B8, 0x01A4, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT13__GPIO_5_7 = IOMUX_PAD(0x04B8, 0x01A4, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT13__MMDC_DEBUG_18 = IOMUX_PAD(0x04B8, 0x01A4, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT13__PL301_PER1_HADR24 = IOMUX_PAD(0x04B8, 0x01A4, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14 = IOMUX_PAD(0x04BC, 0x01A8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT14__IPU2_DISP0_DAT_14 = IOMUX_PAD(0x04BC, 0x01A8, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC = IOMUX_PAD(0x04BC, 0x01A8, 3, 0x07D4, 1, 0),
+ MX6_PAD_DISP0_DAT14__SDMA_DBG_EVT_CHN1 = IOMUX_PAD(0x04BC, 0x01A8, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT14__GPIO_5_8 = IOMUX_PAD(0x04BC, 0x01A8, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT14__MMDC_DEBUG_19 = IOMUX_PAD(0x04BC, 0x01A8, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15 = IOMUX_PAD(0x04C0, 0x01AC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT15__IPU2_DISP0_DAT_15 = IOMUX_PAD(0x04C0, 0x01AC, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT15__ECSPI1_SS1 = IOMUX_PAD(0x04C0, 0x01AC, 2, 0x0804, 1, 0),
+ MX6_PAD_DISP0_DAT15__ECSPI2_SS1 = IOMUX_PAD(0x04C0, 0x01AC, 3, 0x0820, 1, 0),
+ MX6_PAD_DISP0_DAT15__SDMA_DBG_EVT_CHN2 = IOMUX_PAD(0x04C0, 0x01AC, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT15__GPIO_5_9 = IOMUX_PAD(0x04C0, 0x01AC, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT15__MMDC_DEBUG_20 = IOMUX_PAD(0x04C0, 0x01AC, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT15__PL301_PER1_HADR25 = IOMUX_PAD(0x04C0, 0x01AC, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16 = IOMUX_PAD(0x04C4, 0x01B0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT16__IPU2_DISP0_DAT_16 = IOMUX_PAD(0x04C4, 0x01B0, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT16__ECSPI2_MOSI = IOMUX_PAD(0x04C4, 0x01B0, 2, 0x0818, 1, 0),
+ MX6_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC = IOMUX_PAD(0x04C4, 0x01B0, 3, 0x07DC, 0, 0),
+ MX6_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 = IOMUX_PAD(0x04C4, 0x01B0, 4, 0x090C, 0, 0),
+ MX6_PAD_DISP0_DAT16__GPIO_5_10 = IOMUX_PAD(0x04C4, 0x01B0, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT16__MMDC_DEBUG_21 = IOMUX_PAD(0x04C4, 0x01B0, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT16__PL301_PER1_HADR26 = IOMUX_PAD(0x04C4, 0x01B0, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17 = IOMUX_PAD(0x04C8, 0x01B4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT17__IPU2_DISP0_DAT_17 = IOMUX_PAD(0x04C8, 0x01B4, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT17__ECSPI2_MISO = IOMUX_PAD(0x04C8, 0x01B4, 2, 0x0814, 1, 0),
+ MX6_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD = IOMUX_PAD(0x04C8, 0x01B4, 3, 0x07D0, 0, 0),
+ MX6_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 = IOMUX_PAD(0x04C8, 0x01B4, 4, 0x0910, 0, 0),
+ MX6_PAD_DISP0_DAT17__GPIO_5_11 = IOMUX_PAD(0x04C8, 0x01B4, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT17__MMDC_DEBUG_22 = IOMUX_PAD(0x04C8, 0x01B4, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT17__PL301_PER1_HADR27 = IOMUX_PAD(0x04C8, 0x01B4, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18 = IOMUX_PAD(0x04CC, 0x01B8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT18__IPU2_DISP0_DAT_18 = IOMUX_PAD(0x04CC, 0x01B8, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT18__ECSPI2_SS0 = IOMUX_PAD(0x04CC, 0x01B8, 2, 0x081C, 1, 0),
+ MX6_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS = IOMUX_PAD(0x04CC, 0x01B8, 3, 0x07E0, 0, 0),
+ MX6_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS = IOMUX_PAD(0x04CC, 0x01B8, 4, 0x07C0, 0, 0),
+ MX6_PAD_DISP0_DAT18__GPIO_5_12 = IOMUX_PAD(0x04CC, 0x01B8, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT18__MMDC_DEBUG_23 = IOMUX_PAD(0x04CC, 0x01B8, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT18__WEIM_WEIM_CS_2 = IOMUX_PAD(0x04CC, 0x01B8, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19 = IOMUX_PAD(0x04D0, 0x01BC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT19__IPU2_DISP0_DAT_19 = IOMUX_PAD(0x04D0, 0x01BC, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT19__ECSPI2_SCLK = IOMUX_PAD(0x04D0, 0x01BC, 2, 0x0810, 1, 0),
+ MX6_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD = IOMUX_PAD(0x04D0, 0x01BC, 3, 0x07CC, 0, 0),
+ MX6_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC = IOMUX_PAD(0x04D0, 0x01BC, 4, 0x07BC, 0, 0),
+ MX6_PAD_DISP0_DAT19__GPIO_5_13 = IOMUX_PAD(0x04D0, 0x01BC, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT19__MMDC_DEBUG_24 = IOMUX_PAD(0x04D0, 0x01BC, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT19__WEIM_WEIM_CS_3 = IOMUX_PAD(0x04D0, 0x01BC, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20 = IOMUX_PAD(0x04D4, 0x01C0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT20__IPU2_DISP0_DAT_20 = IOMUX_PAD(0x04D4, 0x01C0, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT20__ECSPI1_SCLK = IOMUX_PAD(0x04D4, 0x01C0, 2, 0x07F4, 1, 0),
+ MX6_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC = IOMUX_PAD(0x04D4, 0x01C0, 3, 0x07C4, 0, 0),
+ MX6_PAD_DISP0_DAT20__SDMA_DBG_EVT_CHN7 = IOMUX_PAD(0x04D4, 0x01C0, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT20__GPIO_5_14 = IOMUX_PAD(0x04D4, 0x01C0, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT20__MMDC_DEBUG_25 = IOMUX_PAD(0x04D4, 0x01C0, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT20__PL301_PER1_HADR28 = IOMUX_PAD(0x04D4, 0x01C0, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21 = IOMUX_PAD(0x04D8, 0x01C4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT21__IPU2_DISP0_DAT_21 = IOMUX_PAD(0x04D8, 0x01C4, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT21__ECSPI1_MOSI = IOMUX_PAD(0x04D8, 0x01C4, 2, 0x07FC, 1, 0),
+ MX6_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD = IOMUX_PAD(0x04D8, 0x01C4, 3, 0x07B8, 1, 0),
+ MX6_PAD_DISP0_DAT21__SDMA_DBG_BUS_DEV0 = IOMUX_PAD(0x04D8, 0x01C4, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT21__GPIO_5_15 = IOMUX_PAD(0x04D8, 0x01C4, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT21__MMDC_DEBUG_26 = IOMUX_PAD(0x04D8, 0x01C4, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT21__PL301_PER1_HADR29 = IOMUX_PAD(0x04D8, 0x01C4, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22 = IOMUX_PAD(0x04DC, 0x01C8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT22__IPU2_DISP0_DAT_22 = IOMUX_PAD(0x04DC, 0x01C8, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT22__ECSPI1_MISO = IOMUX_PAD(0x04DC, 0x01C8, 2, 0x07F8, 1, 0),
+ MX6_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS = IOMUX_PAD(0x04DC, 0x01C8, 3, 0x07C8, 1, 0),
+ MX6_PAD_DISP0_DAT22__SDMA_DBG_BUS_DEV1 = IOMUX_PAD(0x04DC, 0x01C8, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT22__GPIO_5_16 = IOMUX_PAD(0x04DC, 0x01C8, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT22__MMDC_DEBUG_27 = IOMUX_PAD(0x04DC, 0x01C8, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT22__PL301_PER1_HADR30 = IOMUX_PAD(0x04DC, 0x01C8, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23 = IOMUX_PAD(0x04E0, 0x01CC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT23__IPU2_DISP0_DAT_23 = IOMUX_PAD(0x04E0, 0x01CC, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT23__ECSPI1_SS0 = IOMUX_PAD(0x04E0, 0x01CC, 2, 0x0800, 1, 0),
+ MX6_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD = IOMUX_PAD(0x04E0, 0x01CC, 3, 0x07B4, 1, 0),
+ MX6_PAD_DISP0_DAT23__SDMA_DBG_BUS_DEV2 = IOMUX_PAD(0x04E0, 0x01CC, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT23__GPIO_5_17 = IOMUX_PAD(0x04E0, 0x01CC, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT23__MMDC_DEBUG_28 = IOMUX_PAD(0x04E0, 0x01CC, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT23__PL301_PER1_HADR31 = IOMUX_PAD(0x04E0, 0x01CC, 7, 0x0000, 0, 0),
+ MX6_PAD_ENET_MDIO__RESERVED_RESERVED = IOMUX_PAD(0x04E4, 0x01D0, 0, 0x0000, 0, 0),
+ MX6_PAD_ENET_MDIO__ENET_MDIO = IOMUX_PAD(0x04E4, 0x01D0, 1, 0x0840, 0, 0),
+ MX6_PAD_ENET_MDIO__ESAI1_SCKR = IOMUX_PAD(0x04E4, 0x01D0, 2, 0x086C, 0, 0),
+ MX6_PAD_ENET_MDIO__SDMA_DEBUG_BUS_DEV3 = IOMUX_PAD(0x04E4, 0x01D0, 3, 0x0000, 0, 0),
+ MX6_PAD_ENET_MDIO__ENET_1588_EVT1_OUT = IOMUX_PAD(0x04E4, 0x01D0, 4, 0x0000, 0, 0),
+ MX6_PAD_ENET_MDIO__GPIO_1_22 = IOMUX_PAD(0x04E4, 0x01D0, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET_MDIO__SPDIF_PLOCK = IOMUX_PAD(0x04E4, 0x01D0, 6, 0x0000, 0, 0),
+ MX6_PAD_ENET_REF_CLK__RESERVED_RSRVED = IOMUX_PAD(0x04E8, 0x01D4, 0, 0x0000, 0, 0),
+ MX6_PAD_ENET_REF_CLK__ENET_TX_CLK = IOMUX_PAD(0x04E8, 0x01D4, 1, 0x0000, 0, 0),
+ MX6_PAD_ENET_REF_CLK__ESAI1_FSR = IOMUX_PAD(0x04E8, 0x01D4, 2, 0x085C, 0, 0),
+ MX6_PAD_ENET_REF_CLK__SDMA_DBGBUS_DEV4 = IOMUX_PAD(0x04E8, 0x01D4, 3, 0x0000, 0, 0),
+ MX6_PAD_ENET_REF_CLK__GPIO_1_23 = IOMUX_PAD(0x04E8, 0x01D4, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET_REF_CLK__SPDIF_SRCLK = IOMUX_PAD(0x04E8, 0x01D4, 6, 0x0000, 0, 0),
+ MX6_PAD_ENET_REF_CLK__USBPHY1_RX_SQH = IOMUX_PAD(0x04E8, 0x01D4, 7, 0x0000, 0, 0),
+ MX6_PAD_ENET_RX_ER__ENET_RX_ER = IOMUX_PAD(0x04EC, 0x01D8, 1, 0x0000, 0, 0),
+ MX6_PAD_ENET_RX_ER__ESAI1_HCKR = IOMUX_PAD(0x04EC, 0x01D8, 2, 0x0864, 0, 0),
+ MX6_PAD_ENET_RX_ER__SPDIF_IN1 = IOMUX_PAD(0x04EC, 0x01D8, 3, 0x0914, 1, 0),
+ MX6_PAD_ENET_RX_ER__ENET_1588_EVT2_OUT = IOMUX_PAD(0x04EC, 0x01D8, 4, 0x0000, 0, 0),
+ MX6_PAD_ENET_RX_ER__GPIO_1_24 = IOMUX_PAD(0x04EC, 0x01D8, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET_RX_ER__PHY_TDI = IOMUX_PAD(0x04EC, 0x01D8, 6, 0x0000, 0, 0),
+ MX6_PAD_ENET_RX_ER__USBPHY1_RX_HS_RXD = IOMUX_PAD(0x04EC, 0x01D8, 7, 0x0000, 0, 0),
+ MX6_PAD_ENET_CRS_DV__RESERVED_RSRVED = IOMUX_PAD(0x04F0, 0x01DC, 0, 0x0000, 0, 0),
+ MX6_PAD_ENET_CRS_DV__ENET_RX_EN = IOMUX_PAD(0x04F0, 0x01DC, 1, 0x0858, 1, 0),
+ MX6_PAD_ENET_CRS_DV__ESAI1_SCKT = IOMUX_PAD(0x04F0, 0x01DC, 2, 0x0870, 0, 0),
+ MX6_PAD_ENET_CRS_DV__SPDIF_EXTCLK = IOMUX_PAD(0x04F0, 0x01DC, 3, 0x0918, 1, 0),
+ MX6_PAD_ENET_CRS_DV__GPIO_1_25 = IOMUX_PAD(0x04F0, 0x01DC, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET_CRS_DV__PHY_TDO = IOMUX_PAD(0x04F0, 0x01DC, 6, 0x0000, 0, 0),
+ MX6_PAD_ENET_CRS_DV__USBPHY1_RX_FS_RXD = IOMUX_PAD(0x04F0, 0x01DC, 7, 0x0000, 0, 0),
+ MX6_PAD_ENET_RXD1__MLB_MLBSIG = IOMUX_PAD(0x04F4, 0x01E0, 0, 0x0908, 0, 0),
+ MX6_PAD_ENET_RXD1__ENET_RDATA_1 = IOMUX_PAD(0x04F4, 0x01E0, 1, 0x084C, 1, 0),
+ MX6_PAD_ENET_RXD1__ESAI1_FST = IOMUX_PAD(0x04F4, 0x01E0, 2, 0x0860, 0, 0),
+ MX6_PAD_ENET_RXD1__ENET_1588_EVT3_OUT = IOMUX_PAD(0x04F4, 0x01E0, 4, 0x0000, 0, 0),
+ MX6_PAD_ENET_RXD1__GPIO_1_26 = IOMUX_PAD(0x04F4, 0x01E0, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET_RXD1__PHY_TCK = IOMUX_PAD(0x04F4, 0x01E0, 6, 0x0000, 0, 0),
+ MX6_PAD_ENET_RXD1__USBPHY1_RX_DISCON = IOMUX_PAD(0x04F4, 0x01E0, 7, 0x0000, 0, 0),
+ MX6_PAD_ENET_RXD0__OSC32K_32K_OUT = IOMUX_PAD(0x04F8, 0x01E4, 0, 0x0000, 0, 0),
+ MX6_PAD_ENET_RXD0__ENET_RDATA_0 = IOMUX_PAD(0x04F8, 0x01E4, 1, 0x0848, 1, 0),
+ MX6_PAD_ENET_RXD0__ESAI1_HCKT = IOMUX_PAD(0x04F8, 0x01E4, 2, 0x0868, 0, 0),
+ MX6_PAD_ENET_RXD0__SPDIF_OUT1 = IOMUX_PAD(0x04F8, 0x01E4, 3, 0x0000, 0, 0),
+ MX6_PAD_ENET_RXD0__GPIO_1_27 = IOMUX_PAD(0x04F8, 0x01E4, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET_RXD0__PHY_TMS = IOMUX_PAD(0x04F8, 0x01E4, 6, 0x0000, 0, 0),
+ MX6_PAD_ENET_RXD0__USBPHY1_PLL_CK20DIV = IOMUX_PAD(0x04F8, 0x01E4, 7, 0x0000, 0, 0),
+ MX6_PAD_ENET_TX_EN__RESERVED_RSRVED = IOMUX_PAD(0x04FC, 0x01E8, 0, 0x0000, 0, 0),
+ MX6_PAD_ENET_TX_EN__ENET_TX_EN = IOMUX_PAD(0x04FC, 0x01E8, 1, 0x0000, 0, 0),
+ MX6_PAD_ENET_TX_EN__ESAI1_TX3_RX2 = IOMUX_PAD(0x04FC, 0x01E8, 2, 0x0880, 0, 0),
+ MX6_PAD_ENET_TX_EN__GPIO_1_28 = IOMUX_PAD(0x04FC, 0x01E8, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET_TX_EN__SATA_PHY_TDI = IOMUX_PAD(0x04FC, 0x01E8, 6, 0x0000, 0, 0),
+ MX6_PAD_ENET_TX_EN__USBPHY2_RX_SQH = IOMUX_PAD(0x04FC, 0x01E8, 7, 0x0000, 0, 0),
+ MX6_PAD_ENET_TXD1__MLB_MLBCLK = IOMUX_PAD(0x0500, 0x01EC, 0, 0x0900, 0, 0),
+ MX6_PAD_ENET_TXD1__ENET_TDATA_1 = IOMUX_PAD(0x0500, 0x01EC, 1, 0x0000, 0, 0),
+ MX6_PAD_ENET_TXD1__ESAI1_TX2_RX3 = IOMUX_PAD(0x0500, 0x01EC, 2, 0x087C, 0, 0),
+ MX6_PAD_ENET_TXD1__ENET_1588_EVENT0_IN = IOMUX_PAD(0x0500, 0x01EC, 4, 0x0000, 0, 0),
+ MX6_PAD_ENET_TXD1__GPIO_1_29 = IOMUX_PAD(0x0500, 0x01EC, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET_TXD1__SATA_PHY_TDO = IOMUX_PAD(0x0500, 0x01EC, 6, 0x0000, 0, 0),
+ MX6_PAD_ENET_TXD1__USBPHY2_RX_HS_RXD = IOMUX_PAD(0x0500, 0x01EC, 7, 0x0000, 0, 0),
+ MX6_PAD_ENET_TXD0__RESERVED_RSRVED = IOMUX_PAD(0x0504, 0x01F0, 0, 0x0000, 0, 0),
+ MX6_PAD_ENET_TXD0__ENET_TDATA_0 = IOMUX_PAD(0x0504, 0x01F0, 1, 0x0000, 0, 0),
+ MX6_PAD_ENET_TXD0__ESAI1_TX4_RX1 = IOMUX_PAD(0x0504, 0x01F0, 2, 0x0884, 0, 0),
+ MX6_PAD_ENET_TXD0__GPIO_1_30 = IOMUX_PAD(0x0504, 0x01F0, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET_TXD0__SATA_PHY_TCK = IOMUX_PAD(0x0504, 0x01F0, 6, 0x0000, 0, 0),
+ MX6_PAD_ENET_TXD0__USBPHY2_RX_FS_RXD = IOMUX_PAD(0x0504, 0x01F0, 7, 0x0000, 0, 0),
+ MX6_PAD_ENET_MDC__MLB_MLBDAT = IOMUX_PAD(0x0508, 0x01F4, 0, 0x0904, 0, 0),
+ MX6_PAD_ENET_MDC__ENET_MDC = IOMUX_PAD(0x0508, 0x01F4, 1, 0x0000, 0, 0),
+ MX6_PAD_ENET_MDC__ESAI1_TX5_RX0 = IOMUX_PAD(0x0508, 0x01F4, 2, 0x0888, 0, 0),
+ MX6_PAD_ENET_MDC__ENET_1588_EVENT1_IN = IOMUX_PAD(0x0508, 0x01F4, 4, 0x0000, 0, 0),
+ MX6_PAD_ENET_MDC__GPIO_1_31 = IOMUX_PAD(0x0508, 0x01F4, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET_MDC__SATA_PHY_TMS = IOMUX_PAD(0x0508, 0x01F4, 6, 0x0000, 0, 0),
+ MX6_PAD_ENET_MDC__USBPHY2_RX_DISCON = IOMUX_PAD(0x0508, 0x01F4, 7, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D40__MMDC_DRAM_D_40 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D41__MMDC_DRAM_D_41 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D42__MMDC_DRAM_D_42 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D43__MMDC_DRAM_D_43 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D44__MMDC_DRAM_D_44 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D45__MMDC_DRAM_D_45 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D46__MMDC_DRAM_D_46 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D47__MMDC_DRAM_D_47 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDQS5__MMDC_DRAM_SDQS_5 = IOMUX_PAD(0x050C, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_DQM5__MMDC_DRAM_DQM_5 = IOMUX_PAD(0x0510, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D32__MMDC_DRAM_D_32 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D33__MMDC_DRAM_D_33 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D34__MMDC_DRAM_D_34 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D35__MMDC_DRAM_D_35 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D36__MMDC_DRAM_D_36 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D37__MMDC_DRAM_D_37 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D38__MMDC_DRAM_D_38 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D39__MMDC_DRAM_D_39 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_DQM4__MMDC_DRAM_DQM_4 = IOMUX_PAD(0x0514, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDQS4__MMDC_DRAM_SDQS_4 = IOMUX_PAD(0x0518, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D24__MMDC_DRAM_D_24 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D25__MMDC_DRAM_D_25 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D26__MMDC_DRAM_D_26 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D27__MMDC_DRAM_D_27 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D28__MMDC_DRAM_D_28 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D29__MMDC_DRAM_D_29 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDQS3__MMDC_DRAM_SDQS_3 = IOMUX_PAD(0x051C, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D30__MMDC_DRAM_D_30 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D31__MMDC_DRAM_D_31 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_DQM3__MMDC_DRAM_DQM_3 = IOMUX_PAD(0x0520, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D16__MMDC_DRAM_D_16 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D17__MMDC_DRAM_D_17 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D18__MMDC_DRAM_D_18 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D19__MMDC_DRAM_D_19 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D20__MMDC_DRAM_D_20 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D21__MMDC_DRAM_D_21 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D22__MMDC_DRAM_D_22 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDQS2__MMDC_DRAM_SDQS_2 = IOMUX_PAD(0x0524, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D23__MMDC_DRAM_D_23 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_DQM2__MMDC_DRAM_DQM_2 = IOMUX_PAD(0x0528, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_A0__MMDC_DRAM_A_0 = IOMUX_PAD(0x052C, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_A1__MMDC_DRAM_A_1 = IOMUX_PAD(0x0530, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_A2__MMDC_DRAM_A_2 = IOMUX_PAD(0x0534, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_A3__MMDC_DRAM_A_3 = IOMUX_PAD(0x0538, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_A4__MMDC_DRAM_A_4 = IOMUX_PAD(0x053C, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_A5__MMDC_DRAM_A_5 = IOMUX_PAD(0x0540, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_A6__MMDC_DRAM_A_6 = IOMUX_PAD(0x0544, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_A7__MMDC_DRAM_A_7 = IOMUX_PAD(0x0548, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_A8__MMDC_DRAM_A_8 = IOMUX_PAD(0x054C, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_A9__MMDC_DRAM_A_9 = IOMUX_PAD(0x0550, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_A10__MMDC_DRAM_A_10 = IOMUX_PAD(0x0554, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_A11__MMDC_DRAM_A_11 = IOMUX_PAD(0x0558, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_A12__MMDC_DRAM_A_12 = IOMUX_PAD(0x055C, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_A13__MMDC_DRAM_A_13 = IOMUX_PAD(0x0560, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_A14__MMDC_DRAM_A_14 = IOMUX_PAD(0x0564, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_A15__MMDC_DRAM_A_15 = IOMUX_PAD(0x0568, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_CAS__MMDC_DRAM_CAS = IOMUX_PAD(0x056C, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_CS0__MMDC_DRAM_CS_0 = IOMUX_PAD(0x0570, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_CS1__MMDC_DRAM_CS_1 = IOMUX_PAD(0x0574, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_RAS__MMDC_DRAM_RAS = IOMUX_PAD(0x0578, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_RESET__MMDC_DRAM_RESET = IOMUX_PAD(0x057C, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDBA0__MMDC_DRAM_SDBA_0 = IOMUX_PAD(0x0580, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDBA1__MMDC_DRAM_SDBA_1 = IOMUX_PAD(0x0584, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDCLK_0__MMDC_DRAM_SDCLK0 = IOMUX_PAD(0x0588, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDBA2__MMDC_DRAM_SDBA_2 = IOMUX_PAD(0x058C, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDCKE0__MMDC_DRAM_SDCKE_0 = IOMUX_PAD(0x0590, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDCLK_1__MMDC_DRAM_SDCLK1 = IOMUX_PAD(0x0594, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDCKE1__MMDC_DRAM_SDCKE_1 = IOMUX_PAD(0x0598, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDODT0__MMDC_DRAM_ODT_0 = IOMUX_PAD(0x059C, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDODT1__MMDC_DRAM_ODT_1 = IOMUX_PAD(0x05A0, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDWE__MMDC_DRAM_SDWE = IOMUX_PAD(0x05A4, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D0__MMDC_DRAM_D_0 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D1__MMDC_DRAM_D_1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D2__MMDC_DRAM_D_2 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D3__MMDC_DRAM_D_3 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D4__MMDC_DRAM_D_4 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D5__MMDC_DRAM_D_5 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDQS0__MMDC_DRAM_SDQS_0 = IOMUX_PAD(0x05A8, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D6__MMDC_DRAM_D_6 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D7__MMDC_DRAM_D_7 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_DQM0__MMDC_DRAM_DQM_0 = IOMUX_PAD(0x05AC, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D8__MMDC_DRAM_D_8 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D9__MMDC_DRAM_D_9 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D10__MMDC_DRAM_D_10 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D11__MMDC_DRAM_D_11 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D12__MMDC_DRAM_D_12 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D13__MMDC_DRAM_D_13 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D14__MMDC_DRAM_D_14 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDQS1__MMDC_DRAM_SDQS_1 = IOMUX_PAD(0x05B0, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D15__MMDC_DRAM_D_15 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_DQM1__MMDC_DRAM_DQM_1 = IOMUX_PAD(0x05B4, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D48__MMDC_DRAM_D_48 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D49__MMDC_DRAM_D_49 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D50__MMDC_DRAM_D_50 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D51__MMDC_DRAM_D_51 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D52__MMDC_DRAM_D_52 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D53__MMDC_DRAM_D_53 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D54__MMDC_DRAM_D_54 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D55__MMDC_DRAM_D_55 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDQS6__MMDC_DRAM_SDQS_6 = IOMUX_PAD(0x05B8, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_DQM6__MMDC_DRAM_DQM_6 = IOMUX_PAD(0x05BC, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D56__MMDC_DRAM_D_56 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDQS7__MMDC_DRAM_SDQS_7 = IOMUX_PAD(0x05C0, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D57__MMDC_DRAM_D_57 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D58__MMDC_DRAM_D_58 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D59__MMDC_DRAM_D_59 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D60__MMDC_DRAM_D_60 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_DQM7__MMDC_DRAM_DQM_7 = IOMUX_PAD(0x05C4, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D61__MMDC_DRAM_D_61 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D62__MMDC_DRAM_D_62 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D63__MMDC_DRAM_D_63 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL0__ECSPI1_SCLK = IOMUX_PAD(0x05C8, 0x01F8, 0, 0x07F4, 2, 0),
+ MX6_PAD_KEY_COL0__ENET_RDATA_3 = IOMUX_PAD(0x05C8, 0x01F8, 1, 0x0854, 1, 0),
+ MX6_PAD_KEY_COL0__AUDMUX_AUD5_TXC = IOMUX_PAD(0x05C8, 0x01F8, 2, 0x07DC, 1, 0),
+ MX6_PAD_KEY_COL0__KPP_COL_0 = IOMUX_PAD(0x05C8, 0x01F8, 3, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL0__UART4_TXD = IOMUX_PAD(0x05C8, 0x01F8, 4, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL0__UART4_TXD_RXD = IOMUX_PAD(0x05C8, 0x01F8, 4, 0x0938, 0, 0),
+ MX6_PAD_KEY_COL0__GPIO_4_6 = IOMUX_PAD(0x05C8, 0x01F8, 5, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL0__DCIC1_DCIC_OUT = IOMUX_PAD(0x05C8, 0x01F8, 6, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL0__SRC_ANY_PU_RST = IOMUX_PAD(0x05C8, 0x01F8, 7, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW0__ECSPI1_MOSI = IOMUX_PAD(0x05CC, 0x01FC, 0, 0x07FC, 2, 0),
+ MX6_PAD_KEY_ROW0__ENET_TDATA_3 = IOMUX_PAD(0x05CC, 0x01FC, 1, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW0__AUDMUX_AUD5_TXD = IOMUX_PAD(0x05CC, 0x01FC, 2, 0x07D0, 1, 0),
+ MX6_PAD_KEY_ROW0__KPP_ROW_0 = IOMUX_PAD(0x05CC, 0x01FC, 3, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW0__UART4_RXD = IOMUX_PAD(0x05CC, 0x01FC, 4, 0x0938, 1, 0),
+ MX6_PAD_KEY_ROW0__GPIO_4_7 = IOMUX_PAD(0x05CC, 0x01FC, 5, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW0__DCIC2_DCIC_OUT = IOMUX_PAD(0x05CC, 0x01FC, 6, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW0__PL301_PER1_HADR_0 = IOMUX_PAD(0x05CC, 0x01FC, 7, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL1__ECSPI1_MISO = IOMUX_PAD(0x05D0, 0x0200, 0, 0x07F8, 2, 0),
+ MX6_PAD_KEY_COL1__ENET_MDIO = IOMUX_PAD(0x05D0, 0x0200, 1, 0x0840, 1, 0),
+ MX6_PAD_KEY_COL1__AUDMUX_AUD5_TXFS = IOMUX_PAD(0x05D0, 0x0200, 2, 0x07E0, 1, 0),
+ MX6_PAD_KEY_COL1__KPP_COL_1 = IOMUX_PAD(0x05D0, 0x0200, 3, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL1__UART5_TXD = IOMUX_PAD(0x05D0, 0x0200, 4, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL1__UART5_TXD_RXD = IOMUX_PAD(0x05D0, 0x0200, 4, 0x0940, 0, 0),
+ MX6_PAD_KEY_COL1__GPIO_4_8 = IOMUX_PAD(0x05D0, 0x0200, 5, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL1__USDHC1_VSELECT = IOMUX_PAD(0x05D0, 0x0200, 6, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL1__PL301MX_PER1_HADR_1 = IOMUX_PAD(0x05D0, 0x0200, 7, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW1__ECSPI1_SS0 = IOMUX_PAD(0x05D4, 0x0204, 0, 0x0800, 2, 0),
+ MX6_PAD_KEY_ROW1__ENET_COL = IOMUX_PAD(0x05D4, 0x0204, 1, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW1__AUDMUX_AUD5_RXD = IOMUX_PAD(0x05D4, 0x0204, 2, 0x07CC, 1, 0),
+ MX6_PAD_KEY_ROW1__KPP_ROW_1 = IOMUX_PAD(0x05D4, 0x0204, 3, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW1__UART5_RXD = IOMUX_PAD(0x05D4, 0x0204, 4, 0x0940, 1, 0),
+ MX6_PAD_KEY_ROW1__GPIO_4_9 = IOMUX_PAD(0x05D4, 0x0204, 5, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW1__USDHC2_VSELECT = IOMUX_PAD(0x05D4, 0x0204, 6, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW1__PL301_PER1_HADDR_2 = IOMUX_PAD(0x05D4, 0x0204, 7, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL2__ECSPI1_SS1 = IOMUX_PAD(0x05D8, 0x0208, 0, 0x0804, 2, 0),
+ MX6_PAD_KEY_COL2__ENET_RDATA_2 = IOMUX_PAD(0x05D8, 0x0208, 1, 0x0850, 1, 0),
+ MX6_PAD_KEY_COL2__CAN1_TXCAN = IOMUX_PAD(0x05D8, 0x0208, 2, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL2__KPP_COL_2 = IOMUX_PAD(0x05D8, 0x0208, 3, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL2__ENET_MDC = IOMUX_PAD(0x05D8, 0x0208, 4, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL2__GPIO_4_10 = IOMUX_PAD(0x05D8, 0x0208, 5, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL2__USBOH3_H1_PWRCTL_WKP = IOMUX_PAD(0x05D8, 0x0208, 6, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL2__PL301_PER1_HADDR_3 = IOMUX_PAD(0x05D8, 0x0208, 7, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW2__ECSPI1_SS2 = IOMUX_PAD(0x05DC, 0x020C, 0, 0x0808, 1, 0),
+ MX6_PAD_KEY_ROW2__ENET_TDATA_2 = IOMUX_PAD(0x05DC, 0x020C, 1, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW2__CAN1_RXCAN = IOMUX_PAD(0x05DC, 0x020C, 2, 0x07E4, 0, 0),
+ MX6_PAD_KEY_ROW2__KPP_ROW_2 = IOMUX_PAD(0x05DC, 0x020C, 3, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW2__USDHC2_VSELECT = IOMUX_PAD(0x05DC, 0x020C, 4, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW2__GPIO_4_11 = IOMUX_PAD(0x05DC, 0x020C, 5, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW2__HDMI_TX_CEC_LINE = IOMUX_PAD(0x05DC, 0x020C, 6, 0x088C, 1, 0),
+ MX6_PAD_KEY_ROW2__PL301_PER1_HADR_4 = IOMUX_PAD(0x05DC, 0x020C, 7, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL3__ECSPI1_SS3 = IOMUX_PAD(0x05E0, 0x0210, 0, 0x080C, 1, 0),
+ MX6_PAD_KEY_COL3__ENET_CRS = IOMUX_PAD(0x05E0, 0x0210, 1, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL3__HDMI_TX_DDC_SCL = IOMUX_PAD(0x05E0, 0x0210, 2, 0x0890, 1, 0),
+ MX6_PAD_KEY_COL3__KPP_COL_3 = IOMUX_PAD(0x05E0, 0x0210, 3, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL3__I2C2_SCL = IOMUX_PAD(0x05E0, 0x0210, 20, 0x08A0, 1, 0),
+ MX6_PAD_KEY_COL3__GPIO_4_12 = IOMUX_PAD(0x05E0, 0x0210, 5, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL3__SPDIF_IN1 = IOMUX_PAD(0x05E0, 0x0210, 6, 0x0914, 2, 0),
+ MX6_PAD_KEY_COL3__PL301_PER1_HADR_5 = IOMUX_PAD(0x05E0, 0x0210, 7, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW3__OSC32K_32K_OUT = IOMUX_PAD(0x05E4, 0x0214, 0, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW3__ASRC_ASRC_EXT_CLK = IOMUX_PAD(0x05E4, 0x0214, 1, 0x07B0, 0, 0),
+ MX6_PAD_KEY_ROW3__HDMI_TX_DDC_SDA = IOMUX_PAD(0x05E4, 0x0214, 2, 0x0894, 1, 0),
+ MX6_PAD_KEY_ROW3__KPP_ROW_3 = IOMUX_PAD(0x05E4, 0x0214, 3, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW3__I2C2_SDA = IOMUX_PAD(0x05E4, 0x0214, 20, 0x08A4, 1, 0),
+ MX6_PAD_KEY_ROW3__GPIO_4_13 = IOMUX_PAD(0x05E4, 0x0214, 5, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW3__USDHC1_VSELECT = IOMUX_PAD(0x05E4, 0x0214, 6, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW3__PL301_PER1_HADR_6 = IOMUX_PAD(0x05E4, 0x0214, 7, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL4__CAN2_TXCAN = IOMUX_PAD(0x05E8, 0x0218, 0, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL4__IPU1_SISG_4 = IOMUX_PAD(0x05E8, 0x0218, 1, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL4__USBOH3_USBOTG_OC = IOMUX_PAD(0x05E8, 0x0218, 2, 0x0944, 1, 0),
+ MX6_PAD_KEY_COL4__KPP_COL_4 = IOMUX_PAD(0x05E8, 0x0218, 3, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL4__UART5_CTS = IOMUX_PAD(0x05E8, 0x0218, 4, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL4__UART5_RTS = IOMUX_PAD(0x05E8, 0x0218, 4, 0x093C, 0, 0),
+ MX6_PAD_KEY_COL4__GPIO_4_14 = IOMUX_PAD(0x05E8, 0x0218, 5, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL4__MMDC_DEBUG_49 = IOMUX_PAD(0x05E8, 0x0218, 6, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL4__PL301_PER1_HADDR_7 = IOMUX_PAD(0x05E8, 0x0218, 7, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW4__CAN2_RXCAN = IOMUX_PAD(0x05EC, 0x021C, 0, 0x07E8, 0, 0),
+ MX6_PAD_KEY_ROW4__IPU1_SISG_5 = IOMUX_PAD(0x05EC, 0x021C, 1, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW4__USBOH3_USBOTG_PWR = IOMUX_PAD(0x05EC, 0x021C, 2, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW4__KPP_ROW_4 = IOMUX_PAD(0x05EC, 0x021C, 3, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW4__UART5_CTS = IOMUX_PAD(0x05EC, 0x021C, 4, 0x093C, 1, 0),
+ MX6_PAD_KEY_ROW4__GPIO_4_15 = IOMUX_PAD(0x05EC, 0x021C, 5, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW4__MMDC_DEBUG_50 = IOMUX_PAD(0x05EC, 0x021C, 6, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW4__PL301_PER1_HADR_8 = IOMUX_PAD(0x05EC, 0x021C, 7, 0x0000, 0, 0),
+ MX6_PAD_GPIO_0__CCM_CLKO = IOMUX_PAD(0x05F0, 0x0220, 0, 0x0000, 0, 0),
+ MX6_PAD_GPIO_0__KPP_COL_5 = IOMUX_PAD(0x05F0, 0x0220, 2, 0x08E8, 0, 0),
+ MX6_PAD_GPIO_0__ASRC_ASRC_EXT_CLK = IOMUX_PAD(0x05F0, 0x0220, 3, 0x07B0, 1, 0),
+ MX6_PAD_GPIO_0__EPIT1_EPITO = IOMUX_PAD(0x05F0, 0x0220, 4, 0x0000, 0, 0),
+ MX6_PAD_GPIO_0__GPIO_1_0 = IOMUX_PAD(0x05F0, 0x0220, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO_0__USBOH3_USBH1_PWR = IOMUX_PAD(0x05F0, 0x0220, 6, 0x0000, 0, 0),
+ MX6_PAD_GPIO_0__SNVS_HP_WRAP_SNVS_VIO5 = IOMUX_PAD(0x05F0, 0x0220, 7, 0x0000, 0, 0),
+ MX6_PAD_GPIO_1__ESAI1_SCKR = IOMUX_PAD(0x05F4, 0x0224, 0, 0x086C, 1, 0),
+ MX6_PAD_GPIO_1__WDOG2_WDOG_B = IOMUX_PAD(0x05F4, 0x0224, 1, 0x0000, 0, 0),
+ MX6_PAD_GPIO_1__KPP_ROW_5 = IOMUX_PAD(0x05F4, 0x0224, 2, 0x08F4, 0, 0),
+ MX6_PAD_GPIO_1__PWM2_PWMO = IOMUX_PAD(0x05F4, 0x0224, 4, 0x0000, 0, 0),
+ MX6_PAD_GPIO_1__GPIO_1_1 = IOMUX_PAD(0x05F4, 0x0224, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO_1__USDHC1_CD = IOMUX_PAD(0x05F4, 0x0224, 6, 0x0000, 0, 0),
+ MX6_PAD_GPIO_1__SRC_TESTER_ACK = IOMUX_PAD(0x05F4, 0x0224, 7, 0x0000, 0, 0),
+ MX6_PAD_GPIO_9__ESAI1_FSR = IOMUX_PAD(0x05F8, 0x0228, 0, 0x085C, 1, 0),
+ MX6_PAD_GPIO_9__WDOG1_WDOG_B = IOMUX_PAD(0x05F8, 0x0228, 1, 0x0000, 0, 0),
+ MX6_PAD_GPIO_9__KPP_COL_6 = IOMUX_PAD(0x05F8, 0x0228, 2, 0x08EC, 0, 0),
+ MX6_PAD_GPIO_9__CCM_REF_EN_B = IOMUX_PAD(0x05F8, 0x0228, 3, 0x0000, 0, 0),
+ MX6_PAD_GPIO_9__PWM1_PWMO = IOMUX_PAD(0x05F8, 0x0228, 4, 0x0000, 0, 0),
+ MX6_PAD_GPIO_9__GPIO_1_9 = IOMUX_PAD(0x05F8, 0x0228, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO_9__USDHC1_WP = IOMUX_PAD(0x05F8, 0x0228, 6, 0x094C, 1, 0),
+ MX6_PAD_GPIO_9__SRC_EARLY_RST = IOMUX_PAD(0x05F8, 0x0228, 7, 0x0000, 0, 0),
+ MX6_PAD_GPIO_3__ESAI1_HCKR = IOMUX_PAD(0x05FC, 0x022C, 0, 0x0864, 1, 0),
+ MX6_PAD_GPIO_3__OBSERVE_MUX_INT_OUT0 = IOMUX_PAD(0x05FC, 0x022C, 1, 0x0000, 0, 0),
+ MX6_PAD_GPIO_3__I2C3_SCL = IOMUX_PAD(0x05FC, 0x022C, 18, 0x08A8, 1, 0),
+ MX6_PAD_GPIO_3__ANATOP_24M_OUT = IOMUX_PAD(0x05FC, 0x022C, 3, 0x0000, 0, 0),
+ MX6_PAD_GPIO_3__CCM_CLKO2 = IOMUX_PAD(0x05FC, 0x022C, 4, 0x0000, 0, 0),
+ MX6_PAD_GPIO_3__GPIO_1_3 = IOMUX_PAD(0x05FC, 0x022C, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO_3__USBOH3_USBH1_OC = IOMUX_PAD(0x05FC, 0x022C, 6, 0x0948, 1, 0),
+ MX6_PAD_GPIO_3__MLB_MLBCLK = IOMUX_PAD(0x05FC, 0x022C, 7, 0x0900, 1, 0),
+ MX6_PAD_GPIO_6__ESAI1_SCKT = IOMUX_PAD(0x0600, 0x0230, 0, 0x0870, 1, 0),
+ MX6_PAD_GPIO_6__OBSERVE_MUX_INT_OUT1 = IOMUX_PAD(0x0600, 0x0230, 1, 0x0000, 0, 0),
+ MX6_PAD_GPIO_6__I2C3_SDA = IOMUX_PAD(0x0600, 0x0230, 18, 0x08AC, 1, 0),
+ MX6_PAD_GPIO_6__CCM_CCM_OUT_0 = IOMUX_PAD(0x0600, 0x0230, 3, 0x0000, 0, 0),
+ MX6_PAD_GPIO_6__CSU_CSU_INT_DEB = IOMUX_PAD(0x0600, 0x0230, 4, 0x0000, 0, 0),
+ MX6_PAD_GPIO_6__GPIO_1_6 = IOMUX_PAD(0x0600, 0x0230, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO_6__USDHC2_LCTL = IOMUX_PAD(0x0600, 0x0230, 6, 0x0000, 0, 0),
+ MX6_PAD_GPIO_6__MLB_MLBSIG = IOMUX_PAD(0x0600, 0x0230, 7, 0x0908, 1, 0),
+ MX6_PAD_GPIO_2__ESAI1_FST = IOMUX_PAD(0x0604, 0x0234, 0, 0x0860, 1, 0),
+ MX6_PAD_GPIO_2__OBSERVE_MUX_INT_OUT2 = IOMUX_PAD(0x0604, 0x0234, 1, 0x0000, 0, 0),
+ MX6_PAD_GPIO_2__KPP_ROW_6 = IOMUX_PAD(0x0604, 0x0234, 2, 0x08F8, 1, 0),
+ MX6_PAD_GPIO_2__CCM_CCM_OUT_1 = IOMUX_PAD(0x0604, 0x0234, 3, 0x0000, 0, 0),
+ MX6_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 = IOMUX_PAD(0x0604, 0x0234, 4, 0x0000, 0, 0),
+ MX6_PAD_GPIO_2__GPIO_1_2 = IOMUX_PAD(0x0604, 0x0234, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO_2__USDHC2_WP = IOMUX_PAD(0x0604, 0x0234, 6, 0x0000, 0, 0),
+ MX6_PAD_GPIO_2__MLB_MLBDAT = IOMUX_PAD(0x0604, 0x0234, 7, 0x0904, 1, 0),
+ MX6_PAD_GPIO_4__ESAI1_HCKT = IOMUX_PAD(0x0608, 0x0238, 0, 0x0868, 1, 0),
+ MX6_PAD_GPIO_4__OBSERVE_MUX_INT_OUT3 = IOMUX_PAD(0x0608, 0x0238, 1, 0x0000, 0, 0),
+ MX6_PAD_GPIO_4__KPP_COL_7 = IOMUX_PAD(0x0608, 0x0238, 2, 0x08F0, 1, 0),
+ MX6_PAD_GPIO_4__CCM_CCM_OUT_2 = IOMUX_PAD(0x0608, 0x0238, 3, 0x0000, 0, 0),
+ MX6_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 = IOMUX_PAD(0x0608, 0x0238, 4, 0x0000, 0, 0),
+ MX6_PAD_GPIO_4__GPIO_1_4 = IOMUX_PAD(0x0608, 0x0238, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO_4__USDHC2_CD = IOMUX_PAD(0x0608, 0x0238, 6, 0x0000, 0, 0),
+ MX6_PAD_GPIO_4__OCOTP_CRL_WRAR_FUSE_LA = IOMUX_PAD(0x0608, 0x0238, 7, 0x0000, 0, 0),
+ MX6_PAD_GPIO_5__ESAI1_TX2_RX3 = IOMUX_PAD(0x060C, 0x023C, 0, 0x087C, 1, 0),
+ MX6_PAD_GPIO_5__OBSERVE_MUX_INT_OUT4 = IOMUX_PAD(0x060C, 0x023C, 1, 0x0000, 0, 0),
+ MX6_PAD_GPIO_5__KPP_ROW_7 = IOMUX_PAD(0x060C, 0x023C, 2, 0x08FC, 1, 0),
+ MX6_PAD_GPIO_5__CCM_CLKO = IOMUX_PAD(0x060C, 0x023C, 3, 0x0000, 0, 0),
+ MX6_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 = IOMUX_PAD(0x060C, 0x023C, 4, 0x0000, 0, 0),
+ MX6_PAD_GPIO_5__GPIO_1_5 = IOMUX_PAD(0x060C, 0x023C, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO_5__I2C3_SCL = IOMUX_PAD(0x060C, 0x023C, 22, 0x08A8, 2, 0),
+ MX6_PAD_GPIO_5__CHEETAH_EVENTI = IOMUX_PAD(0x060C, 0x023C, 7, 0x0000, 0, 0),
+ MX6_PAD_GPIO_7__ESAI1_TX4_RX1 = IOMUX_PAD(0x0610, 0x0240, 0, 0x0884, 1, 0),
+ MX6_PAD_GPIO_7__ECSPI5_RDY = IOMUX_PAD(0x0610, 0x0240, 1, 0x0000, 0, 0),
+ MX6_PAD_GPIO_7__EPIT1_EPITO = IOMUX_PAD(0x0610, 0x0240, 2, 0x0000, 0, 0),
+ MX6_PAD_GPIO_7__CAN1_TXCAN = IOMUX_PAD(0x0610, 0x0240, 3, 0x0000, 0, 0),
+ MX6_PAD_GPIO_7__UART2_TXD = IOMUX_PAD(0x0610, 0x0240, 4, 0x0000, 0, 0),
+ MX6_PAD_GPIO_7__UART2_TXD_RXD = IOMUX_PAD(0x0610, 0x0240, 4, 0x0928, 2, 0),
+ MX6_PAD_GPIO_7__GPIO_1_7 = IOMUX_PAD(0x0610, 0x0240, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO_7__SPDIF_PLOCK = IOMUX_PAD(0x0610, 0x0240, 6, 0x0000, 0, 0),
+ MX6_PAD_GPIO_7__USBOH3_OTGUSB_HST_MODE = IOMUX_PAD(0x0610, 0x0240, 7, 0x0000, 0, 0),
+ MX6_PAD_GPIO_8__ESAI1_TX5_RX0 = IOMUX_PAD(0x0614, 0x0244, 0, 0x0888, 1, 0),
+ MX6_PAD_GPIO_8__ANATOP_ANATOP_32K_OUT = IOMUX_PAD(0x0614, 0x0244, 1, 0x0000, 0, 0),
+ MX6_PAD_GPIO_8__EPIT2_EPITO = IOMUX_PAD(0x0614, 0x0244, 2, 0x0000, 0, 0),
+ MX6_PAD_GPIO_8__CAN1_RXCAN = IOMUX_PAD(0x0614, 0x0244, 3, 0x07E4, 1, 0),
+ MX6_PAD_GPIO_8__UART2_RXD = IOMUX_PAD(0x0614, 0x0244, 4, 0x0928, 3, 0),
+ MX6_PAD_GPIO_8__GPIO_1_8 = IOMUX_PAD(0x0614, 0x0244, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO_8__SPDIF_SRCLK = IOMUX_PAD(0x0614, 0x0244, 6, 0x0000, 0, 0),
+ MX6_PAD_GPIO_8__USBOH3_OTG_PWRCTL_WAK = IOMUX_PAD(0x0614, 0x0244, 7, 0x0000, 0, 0),
+ MX6_PAD_GPIO_16__ESAI1_TX3_RX2 = IOMUX_PAD(0x0618, 0x0248, 0, 0x0880, 1, 0),
+ MX6_PAD_GPIO_16__ENET_1588_EVENT2_IN = IOMUX_PAD(0x0618, 0x0248, 1, 0x0000, 0, 0),
+ MX6_PAD_GPIO_16__ENET_ETHERNET_REF_OUT = IOMUX_PAD(0x0618, 0x0248, 2, 0x083C, 1, 0),
+ MX6_PAD_GPIO_16__USDHC1_LCTL = IOMUX_PAD(0x0618, 0x0248, 3, 0x0000, 0, 0),
+ MX6_PAD_GPIO_16__SPDIF_IN1 = IOMUX_PAD(0x0618, 0x0248, 4, 0x0914, 3, 0),
+ MX6_PAD_GPIO_16__GPIO_7_11 = IOMUX_PAD(0x0618, 0x0248, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO_16__I2C3_SDA = IOMUX_PAD(0x0618, 0x0248, 22, 0x08AC, 2, 0),
+ MX6_PAD_GPIO_16__SJC_DE_B = IOMUX_PAD(0x0618, 0x0248, 7, 0x0000, 0, 0),
+ MX6_PAD_GPIO_17__ESAI1_TX0 = IOMUX_PAD(0x061C, 0x024C, 0, 0x0874, 0, 0),
+ MX6_PAD_GPIO_17__ENET_1588_EVENT3_IN = IOMUX_PAD(0x061C, 0x024C, 1, 0x0000, 0, 0),
+ MX6_PAD_GPIO_17__CCM_PMIC_RDY = IOMUX_PAD(0x061C, 0x024C, 2, 0x07F0, 1, 0),
+ MX6_PAD_GPIO_17__SDMA_SDMA_EXT_EVENT_0 = IOMUX_PAD(0x061C, 0x024C, 3, 0x090C, 1, 0),
+ MX6_PAD_GPIO_17__SPDIF_OUT1 = IOMUX_PAD(0x061C, 0x024C, 4, 0x0000, 0, 0),
+ MX6_PAD_GPIO_17__GPIO_7_12 = IOMUX_PAD(0x061C, 0x024C, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO_17__SJC_JTAG_ACT = IOMUX_PAD(0x061C, 0x024C, 7, 0x0000, 0, 0),
+ MX6_PAD_GPIO_18__ESAI1_TX1 = IOMUX_PAD(0x0620, 0x0250, 0, 0x0878, 0, 0),
+ MX6_PAD_GPIO_18__ENET_RX_CLK = IOMUX_PAD(0x0620, 0x0250, 1, 0x0844, 1, 0),
+ MX6_PAD_GPIO_18__USDHC3_VSELECT = IOMUX_PAD(0x0620, 0x0250, 2, 0x0000, 0, 0),
+ MX6_PAD_GPIO_18__SDMA_SDMA_EXT_EVENT_1 = IOMUX_PAD(0x0620, 0x0250, 3, 0x0910, 1, 0),
+ MX6_PAD_GPIO_18__ASRC_ASRC_EXT_CLK = IOMUX_PAD(0x0620, 0x0250, 4, 0x07B0, 2, 0),
+ MX6_PAD_GPIO_18__GPIO_7_13 = IOMUX_PAD(0x0620, 0x0250, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO_18__SNVS_HP_WRA_SNVS_VIO5 = IOMUX_PAD(0x0620, 0x0250, 6, 0x0000, 0, 0),
+ MX6_PAD_GPIO_18__SRC_SYSTEM_RST = IOMUX_PAD(0x0620, 0x0250, 7, 0x0000, 0, 0),
+ MX6_PAD_GPIO_19__KPP_COL_5 = IOMUX_PAD(0x0624, 0x0254, 0, 0x08E8, 1, 0),
+ MX6_PAD_GPIO_19__ENET_1588_EVENT0_OUT = IOMUX_PAD(0x0624, 0x0254, 1, 0x0000, 0, 0),
+ MX6_PAD_GPIO_19__SPDIF_OUT1 = IOMUX_PAD(0x0624, 0x0254, 2, 0x0000, 0, 0),
+ MX6_PAD_GPIO_19__CCM_CLKO = IOMUX_PAD(0x0624, 0x0254, 3, 0x0000, 0, 0),
+ MX6_PAD_GPIO_19__ECSPI1_RDY = IOMUX_PAD(0x0624, 0x0254, 4, 0x0000, 0, 0),
+ MX6_PAD_GPIO_19__GPIO_4_5 = IOMUX_PAD(0x0624, 0x0254, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO_19__ENET_TX_ER = IOMUX_PAD(0x0624, 0x0254, 6, 0x0000, 0, 0),
+ MX6_PAD_GPIO_19__SRC_INT_BOOT = IOMUX_PAD(0x0624, 0x0254, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK = IOMUX_PAD(0x0628, 0x0258, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_PIXCLK__PCIE_CTRL_MUX_12 = IOMUX_PAD(0x0628, 0x0258, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 = IOMUX_PAD(0x0628, 0x0258, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_PIXCLK__GPIO_5_18 = IOMUX_PAD(0x0628, 0x0258, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_PIXCLK___MMDC_DEBUG_29 = IOMUX_PAD(0x0628, 0x0258, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_PIXCLK__CHEETAH_EVENTO = IOMUX_PAD(0x0628, 0x0258, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC = IOMUX_PAD(0x062C, 0x025C, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_MCLK__PCIE_CTRL_MUX_13 = IOMUX_PAD(0x062C, 0x025C, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI0_MCLK__CCM_CLKO = IOMUX_PAD(0x062C, 0x025C, 3, 0x0000, 0, 0),
+ MX6_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 = IOMUX_PAD(0x062C, 0x025C, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_MCLK__GPIO_5_19 = IOMUX_PAD(0x062C, 0x025C, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_MCLK__MMDC_MMDC_DEBUG_30 = IOMUX_PAD(0x062C, 0x025C, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_MCLK__CHEETAH_TRCTL = IOMUX_PAD(0x062C, 0x025C, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DATA_EN__IPU1_CSI0_DA_EN = IOMUX_PAD(0x0630, 0x0260, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DATA_EN__WEIM_WEIM_D_0 = IOMUX_PAD(0x0630, 0x0260, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DATA_EN__PCIE_CTRL_MUX_14 = IOMUX_PAD(0x0630, 0x0260, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 = IOMUX_PAD(0x0630, 0x0260, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DATA_EN__GPIO_5_20 = IOMUX_PAD(0x0630, 0x0260, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DATA_EN__MMDC_DEBUG_31 = IOMUX_PAD(0x0630, 0x0260, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DATA_EN__CHEETAH_TRCLK = IOMUX_PAD(0x0630, 0x0260, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC = IOMUX_PAD(0x0634, 0x0264, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_VSYNC__WEIM_WEIM_D_1 = IOMUX_PAD(0x0634, 0x0264, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_VSYNC__PCIE_CTRL_MUX_15 = IOMUX_PAD(0x0634, 0x0264, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 = IOMUX_PAD(0x0634, 0x0264, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_VSYNC__GPIO_5_21 = IOMUX_PAD(0x0634, 0x0264, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_VSYNC__MMDC_DEBUG_32 = IOMUX_PAD(0x0634, 0x0264, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_VSYNC__CHEETAH_TRACE_0 = IOMUX_PAD(0x0634, 0x0264, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT4__IPU1_CSI0_D_4 = IOMUX_PAD(0x0638, 0x0268, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT4__WEIM_WEIM_D_2 = IOMUX_PAD(0x0638, 0x0268, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT4__ECSPI1_SCLK = IOMUX_PAD(0x0638, 0x0268, 2, 0x07F4, 3, 0),
+ MX6_PAD_CSI0_DAT4__KPP_COL_5 = IOMUX_PAD(0x0638, 0x0268, 3, 0x08E8, 2, 0),
+ MX6_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC = IOMUX_PAD(0x0638, 0x0268, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT4__GPIO_5_22 = IOMUX_PAD(0x0638, 0x0268, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT4__MMDC_DEBUG_43 = IOMUX_PAD(0x0638, 0x0268, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT4__CHEETAH_TRACE_1 = IOMUX_PAD(0x0638, 0x0268, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT5__IPU1_CSI0_D_5 = IOMUX_PAD(0x063C, 0x026C, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT5__WEIM_WEIM_D_3 = IOMUX_PAD(0x063C, 0x026C, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT5__ECSPI1_MOSI = IOMUX_PAD(0x063C, 0x026C, 2, 0x07FC, 3, 0),
+ MX6_PAD_CSI0_DAT5__KPP_ROW_5 = IOMUX_PAD(0x063C, 0x026C, 3, 0x08F4, 1, 0),
+ MX6_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD = IOMUX_PAD(0x063C, 0x026C, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT5__GPIO_5_23 = IOMUX_PAD(0x063C, 0x026C, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT5__MMDC_MMDC_DEBUG_44 = IOMUX_PAD(0x063C, 0x026C, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT5__CHEETAH_TRACE_2 = IOMUX_PAD(0x063C, 0x026C, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT6__IPU1_CSI0_D_6 = IOMUX_PAD(0x0640, 0x0270, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT6__WEIM_WEIM_D_4 = IOMUX_PAD(0x0640, 0x0270, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT6__ECSPI1_MISO = IOMUX_PAD(0x0640, 0x0270, 2, 0x07F8, 3, 0),
+ MX6_PAD_CSI0_DAT6__KPP_COL_6 = IOMUX_PAD(0x0640, 0x0270, 3, 0x08EC, 1, 0),
+ MX6_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS = IOMUX_PAD(0x0640, 0x0270, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT6__GPIO_5_24 = IOMUX_PAD(0x0640, 0x0270, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT6__MMDC_MMDC_DEBUG_45 = IOMUX_PAD(0x0640, 0x0270, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT6__CHEETAH_TRACE_3 = IOMUX_PAD(0x0640, 0x0270, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT7__IPU1_CSI0_D_7 = IOMUX_PAD(0x0644, 0x0274, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT7__WEIM_WEIM_D_5 = IOMUX_PAD(0x0644, 0x0274, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT7__ECSPI1_SS0 = IOMUX_PAD(0x0644, 0x0274, 2, 0x0800, 3, 0),
+ MX6_PAD_CSI0_DAT7__KPP_ROW_6 = IOMUX_PAD(0x0644, 0x0274, 3, 0x08F8, 2, 0),
+ MX6_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD = IOMUX_PAD(0x0644, 0x0274, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT7__GPIO_5_25 = IOMUX_PAD(0x0644, 0x0274, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT7__MMDC_MMDC_DEBUG_46 = IOMUX_PAD(0x0644, 0x0274, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT7__CHEETAH_TRACE_4 = IOMUX_PAD(0x0644, 0x0274, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT8__IPU1_CSI0_D_8 = IOMUX_PAD(0x0648, 0x0278, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT8__WEIM_WEIM_D_6 = IOMUX_PAD(0x0648, 0x0278, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT8__ECSPI2_SCLK = IOMUX_PAD(0x0648, 0x0278, 2, 0x0810, 2, 0),
+ MX6_PAD_CSI0_DAT8__KPP_COL_7 = IOMUX_PAD(0x0648, 0x0278, 3, 0x08F0, 2, 0),
+ MX6_PAD_CSI0_DAT8__I2C1_SDA = IOMUX_PAD(0x0648, 0x0278, 20, 0x089C, 1, 0),
+ MX6_PAD_CSI0_DAT8__GPIO_5_26 = IOMUX_PAD(0x0648, 0x0278, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT8__MMDC_MMDC_DEBUG_47 = IOMUX_PAD(0x0648, 0x0278, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT8__CHEETAH_TRACE_5 = IOMUX_PAD(0x0648, 0x0278, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT9__IPU1_CSI0_D_9 = IOMUX_PAD(0x064C, 0x027C, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT9__WEIM_WEIM_D_7 = IOMUX_PAD(0x064C, 0x027C, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT9__ECSPI2_MOSI = IOMUX_PAD(0x064C, 0x027C, 2, 0x0818, 2, 0),
+ MX6_PAD_CSI0_DAT9__KPP_ROW_7 = IOMUX_PAD(0x064C, 0x027C, 3, 0x08FC, 2, 0),
+ MX6_PAD_CSI0_DAT9__I2C1_SCL = IOMUX_PAD(0x064C, 0x027C, 20, 0x0898, 1, 0),
+ MX6_PAD_CSI0_DAT9__GPIO_5_27 = IOMUX_PAD(0x064C, 0x027C, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT9__MMDC_MMDC_DEBUG_48 = IOMUX_PAD(0x064C, 0x027C, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT9__CHEETAH_TRACE_6 = IOMUX_PAD(0x064C, 0x027C, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT10__IPU1_CSI0_D_10 = IOMUX_PAD(0x0650, 0x0280, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC = IOMUX_PAD(0x0650, 0x0280, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT10__ECSPI2_MISO = IOMUX_PAD(0x0650, 0x0280, 2, 0x0814, 2, 0),
+ MX6_PAD_CSI0_DAT10__UART1_TXD = IOMUX_PAD(0x0650, 0x0280, 3, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT10__UART1_TXD_RXD = IOMUX_PAD(0x0650, 0x0280, 3, 0x0920, 0, 0),
+ MX6_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 = IOMUX_PAD(0x0650, 0x0280, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT10__GPIO_5_28 = IOMUX_PAD(0x0650, 0x0280, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT10__MMDC_MMDC_DEBUG_33 = IOMUX_PAD(0x0650, 0x0280, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT10__CHEETAH_TRACE_7 = IOMUX_PAD(0x0650, 0x0280, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT11__IPU1_CSI0_D_11 = IOMUX_PAD(0x0654, 0x0284, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS = IOMUX_PAD(0x0654, 0x0284, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT11__ECSPI2_SS0 = IOMUX_PAD(0x0654, 0x0284, 2, 0x081C, 2, 0),
+ MX6_PAD_CSI0_DAT11__UART1_RXD = IOMUX_PAD(0x0654, 0x0284, 3, 0x0920, 1, 0),
+ MX6_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 = IOMUX_PAD(0x0654, 0x0284, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT11__GPIO_5_29 = IOMUX_PAD(0x0654, 0x0284, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT11__MMDC_MMDC_DEBUG_34 = IOMUX_PAD(0x0654, 0x0284, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT11__CHEETAH_TRACE_8 = IOMUX_PAD(0x0654, 0x0284, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT12__IPU1_CSI0_D_12 = IOMUX_PAD(0x0658, 0x0288, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT12__WEIM_WEIM_D_8 = IOMUX_PAD(0x0658, 0x0288, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT12__PCIE_CTRL_MUX_16 = IOMUX_PAD(0x0658, 0x0288, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT12__UART4_TXD = IOMUX_PAD(0x0658, 0x0288, 3, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT12__UART4_TXD_RXD = IOMUX_PAD(0x0658, 0x0288, 3, 0x0938, 2, 0),
+ MX6_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 = IOMUX_PAD(0x0658, 0x0288, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT12__GPIO_5_30 = IOMUX_PAD(0x0658, 0x0288, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT12__MMDC_MMDC_DEBUG_35 = IOMUX_PAD(0x0658, 0x0288, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT12__CHEETAH_TRACE_9 = IOMUX_PAD(0x0658, 0x0288, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT13__IPU1_CSI0_D_13 = IOMUX_PAD(0x065C, 0x028C, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT13__WEIM_WEIM_D_9 = IOMUX_PAD(0x065C, 0x028C, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT13__PCIE_CTRL_MUX_17 = IOMUX_PAD(0x065C, 0x028C, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT13__UART4_RXD = IOMUX_PAD(0x065C, 0x028C, 3, 0x0938, 3, 0),
+ MX6_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 = IOMUX_PAD(0x065C, 0x028C, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT13__GPIO_5_31 = IOMUX_PAD(0x065C, 0x028C, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT13__MMDC_MMDC_DEBUG_36 = IOMUX_PAD(0x065C, 0x028C, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT13__CHEETAH_TRACE_10 = IOMUX_PAD(0x065C, 0x028C, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT14__IPU1_CSI0_D_14 = IOMUX_PAD(0x0660, 0x0290, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT14__WEIM_WEIM_D_10 = IOMUX_PAD(0x0660, 0x0290, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT14__PCIE_CTRL_MUX_18 = IOMUX_PAD(0x0660, 0x0290, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT14__UART5_TXD = IOMUX_PAD(0x0660, 0x0290, 3, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT14__UART5_TXD_RXD = IOMUX_PAD(0x0660, 0x0290, 3, 0x0940, 2, 0),
+ MX6_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 = IOMUX_PAD(0x0660, 0x0290, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT14__GPIO_6_0 = IOMUX_PAD(0x0660, 0x0290, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT14__MMDC_MMDC_DEBUG_37 = IOMUX_PAD(0x0660, 0x0290, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT14__CHEETAH_TRACE_11 = IOMUX_PAD(0x0660, 0x0290, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT15__IPU1_CSI0_D_15 = IOMUX_PAD(0x0664, 0x0294, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT15__WEIM_WEIM_D_11 = IOMUX_PAD(0x0664, 0x0294, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT15__PCIE_CTRL_MUX_19 = IOMUX_PAD(0x0664, 0x0294, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT15__UART5_RXD = IOMUX_PAD(0x0664, 0x0294, 3, 0x0940, 3, 0),
+ MX6_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 = IOMUX_PAD(0x0664, 0x0294, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT15__GPIO_6_1 = IOMUX_PAD(0x0664, 0x0294, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT15__MMDC_MMDC_DEBUG_38 = IOMUX_PAD(0x0664, 0x0294, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT15__CHEETAH_TRACE_12 = IOMUX_PAD(0x0664, 0x0294, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT16__IPU1_CSI0_D_16 = IOMUX_PAD(0x0668, 0x0298, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT16__WEIM_WEIM_D_12 = IOMUX_PAD(0x0668, 0x0298, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT16__PCIE_CTRL_MUX_20 = IOMUX_PAD(0x0668, 0x0298, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT16__UART4_CTS = IOMUX_PAD(0x0668, 0x0298, 3, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT16__UART4_RTS = IOMUX_PAD(0x0668, 0x0298, 3, 0x0934, 0, 0),
+ MX6_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 = IOMUX_PAD(0x0668, 0x0298, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT16__GPIO_6_2 = IOMUX_PAD(0x0668, 0x0298, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT16__MMDC_MMDC_DEBUG_39 = IOMUX_PAD(0x0668, 0x0298, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT16__CHEETAH_TRACE_13 = IOMUX_PAD(0x0668, 0x0298, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT17__IPU1_CSI0_D_17 = IOMUX_PAD(0x066C, 0x029C, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT17__WEIM_WEIM_D_13 = IOMUX_PAD(0x066C, 0x029C, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT17__PCIE_CTRL_MUX_21 = IOMUX_PAD(0x066C, 0x029C, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT17__UART4_CTS = IOMUX_PAD(0x066C, 0x029C, 3, 0x0934, 1, 0),
+ MX6_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 = IOMUX_PAD(0x066C, 0x029C, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT17__GPIO_6_3 = IOMUX_PAD(0x066C, 0x029C, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT17__MMDC_MMDC_DEBUG_40 = IOMUX_PAD(0x066C, 0x029C, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT17__CHEETAH_TRACE_14 = IOMUX_PAD(0x066C, 0x029C, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT18__IPU1_CSI0_D_18 = IOMUX_PAD(0x0670, 0x02A0, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT18__WEIM_WEIM_D_14 = IOMUX_PAD(0x0670, 0x02A0, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT18__PCIE_CTRL_MUX_22 = IOMUX_PAD(0x0670, 0x02A0, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT18__UART5_CTS = IOMUX_PAD(0x0670, 0x02A0, 3, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT18__UART5_RTS = IOMUX_PAD(0x0670, 0x02A0, 3, 0x093C, 2, 0),
+ MX6_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 = IOMUX_PAD(0x0670, 0x02A0, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT18__GPIO_6_4 = IOMUX_PAD(0x0670, 0x02A0, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT18__MMDC_MMDC_DEBUG_41 = IOMUX_PAD(0x0670, 0x02A0, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT18__CHEETAH_TRACE_15 = IOMUX_PAD(0x0670, 0x02A0, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT19__IPU1_CSI0_D_19 = IOMUX_PAD(0x0674, 0x02A4, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT19__WEIM_WEIM_D_15 = IOMUX_PAD(0x0674, 0x02A4, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT19__PCIE_CTRL_MUX_23 = IOMUX_PAD(0x0674, 0x02A4, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT19__UART5_CTS = IOMUX_PAD(0x0674, 0x02A4, 3, 0x093C, 3, 0),
+ MX6_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 = IOMUX_PAD(0x0674, 0x02A4, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT19__GPIO_6_5 = IOMUX_PAD(0x0674, 0x02A4, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT19__MMDC_MMDC_DEBUG_42 = IOMUX_PAD(0x0674, 0x02A4, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT19__ANATOP_TESTO_9 = IOMUX_PAD(0x0674, 0x02A4, 7, 0x0000, 0, 0),
+ MX6_PAD_JTAG_TMS__SJC_TMS = IOMUX_PAD(0x0678, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_JTAG_MOD__SJC_MOD = IOMUX_PAD(0x067C, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_JTAG_TRSTB__SJC_TRSTB = IOMUX_PAD(0x0680, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_JTAG_TDI__SJC_TDI = IOMUX_PAD(0x0684, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_JTAG_TCK__SJC_TCK = IOMUX_PAD(0x0688, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_JTAG_TDO__SJC_TDO = IOMUX_PAD(0x068C, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_TAMPER__SNVS_LP_WRAP_SNVS_TD1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_PMIC_ON_REQ__SNVS_LPWRAP_WKALM = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_PMIC_STBY_REQ__CCM_PMIC_STBYRQ = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_POR_B__SRC_POR_B = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_BOOT_MODE1__SRC_BOOT_MODE_1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_RESET_IN_B__SRC_RESET_B = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_BOOT_MODE0__SRC_BOOT_MODE_0 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_TEST_MODE__TCU_TEST_MODE = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT7__USDHC3_DAT7 = IOMUX_PAD(0x0690, 0x02A8, 0, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT7__UART1_TXD = IOMUX_PAD(0x0690, 0x02A8, 1, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT7__UART1_TXD_RXD = IOMUX_PAD(0x0690, 0x02A8, 1, 0x0920, 2, 0),
+ MX6_PAD_SD3_DAT7__PCIE_CTRL_MUX_24 = IOMUX_PAD(0x0690, 0x02A8, 2, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT7__USBOH3_UH3_DFD_OUT_0 = IOMUX_PAD(0x0690, 0x02A8, 3, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT7__USBOH3_UH2_DFD_OUT_0 = IOMUX_PAD(0x0690, 0x02A8, 4, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT7__GPIO_6_17 = IOMUX_PAD(0x0690, 0x02A8, 5, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT7__MIPI_CORE_DPHY_IN_12 = IOMUX_PAD(0x0690, 0x02A8, 6, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT7__USBPHY2_CLK20DIV = IOMUX_PAD(0x0690, 0x02A8, 7, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT6__USDHC3_DAT6 = IOMUX_PAD(0x0694, 0x02AC, 0, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT6__UART1_RXD = IOMUX_PAD(0x0694, 0x02AC, 1, 0x0920, 3, 0),
+ MX6_PAD_SD3_DAT6__PCIE_CTRL_MUX_25 = IOMUX_PAD(0x0694, 0x02AC, 2, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT6__USBOH3_UH3_DFD_OUT_1 = IOMUX_PAD(0x0694, 0x02AC, 3, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT6__USBOH3_UH2_DFD_OUT_1 = IOMUX_PAD(0x0694, 0x02AC, 4, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT6__GPIO_6_18 = IOMUX_PAD(0x0694, 0x02AC, 5, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT6__MIPI_CORE_DPHY_IN_13 = IOMUX_PAD(0x0694, 0x02AC, 6, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT6__ANATOP_TESTO_10 = IOMUX_PAD(0x0694, 0x02AC, 7, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT5__USDHC3_DAT5 = IOMUX_PAD(0x0698, 0x02B0, 0, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT5__UART2_TXD = IOMUX_PAD(0x0698, 0x02B0, 1, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT5__UART2_TXD_RXD = IOMUX_PAD(0x0698, 0x02B0, 1, 0x0928, 4, 0),
+ MX6_PAD_SD3_DAT5__PCIE_CTRL_MUX_26 = IOMUX_PAD(0x0698, 0x02B0, 2, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT5__USBOH3_UH3_DFD_OUT_2 = IOMUX_PAD(0x0698, 0x02B0, 3, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT5__USBOH3_UH2_DFD_OUT_2 = IOMUX_PAD(0x0698, 0x02B0, 4, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT5__GPIO_7_0 = IOMUX_PAD(0x0698, 0x02B0, 5, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT5__MIPI_CORE_DPHY_IN_14 = IOMUX_PAD(0x0698, 0x02B0, 6, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT5__ANATOP_TESTO_11 = IOMUX_PAD(0x0698, 0x02B0, 7, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT4__USDHC3_DAT4 = IOMUX_PAD(0x069C, 0x02B4, 0, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT4__UART2_RXD = IOMUX_PAD(0x069C, 0x02B4, 1, 0x0928, 5, 0),
+ MX6_PAD_SD3_DAT4__PCIE_CTRL_MUX_27 = IOMUX_PAD(0x069C, 0x02B4, 2, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT4__USBOH3_UH3_DFD_OUT_3 = IOMUX_PAD(0x069C, 0x02B4, 3, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT4__USBOH3_UH2_DFD_OUT_3 = IOMUX_PAD(0x069C, 0x02B4, 4, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT4__GPIO_7_1 = IOMUX_PAD(0x069C, 0x02B4, 5, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT4__MIPI_CORE_DPHY_IN_15 = IOMUX_PAD(0x069C, 0x02B4, 6, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT4__ANATOP_TESTO_12 = IOMUX_PAD(0x069C, 0x02B4, 7, 0x0000, 0, 0),
+ MX6_PAD_SD3_CMD__USDHC3_CMD = IOMUX_PAD(0x06A0, 0x02B8, 16, 0x0000, 0, 0),
+ MX6_PAD_SD3_CMD__UART2_CTS = IOMUX_PAD(0x06A0, 0x02B8, 1, 0x0924, 2, 0),
+ MX6_PAD_SD3_CMD__CAN1_TXCAN = IOMUX_PAD(0x06A0, 0x02B8, 2, 0x0000, 0, 0),
+ MX6_PAD_SD3_CMD__USBOH3_UH3_DFD_OUT_4 = IOMUX_PAD(0x06A0, 0x02B8, 3, 0x0000, 0, 0),
+ MX6_PAD_SD3_CMD__USBOH3_UH2_DFD_OUT_4 = IOMUX_PAD(0x06A0, 0x02B8, 4, 0x0000, 0, 0),
+ MX6_PAD_SD3_CMD__GPIO_7_2 = IOMUX_PAD(0x06A0, 0x02B8, 5, 0x0000, 0, 0),
+ MX6_PAD_SD3_CMD__MIPI_CORE_DPHY_IN_16 = IOMUX_PAD(0x06A0, 0x02B8, 6, 0x0000, 0, 0),
+ MX6_PAD_SD3_CMD__ANATOP_TESTO_13 = IOMUX_PAD(0x06A0, 0x02B8, 7, 0x0000, 0, 0),
+ MX6_PAD_SD3_CLK__USDHC3_CLK = IOMUX_PAD(0x06A4, 0x02BC, 0, 0x0000, 0, 0),
+ MX6_PAD_SD3_CLK__UART2_CTS = IOMUX_PAD(0x06A4, 0x02BC, 1, 0x0000, 0, 0),
+ MX6_PAD_SD3_CLK__UART2_RTS = IOMUX_PAD(0x06A4, 0x02BC, 1, 0x0924, 3, 0),
+ MX6_PAD_SD3_CLK__CAN1_RXCAN = IOMUX_PAD(0x06A4, 0x02BC, 2, 0x07E4, 2, 0),
+ MX6_PAD_SD3_CLK__USBOH3_UH3_DFD_OUT_5 = IOMUX_PAD(0x06A4, 0x02BC, 3, 0x0000, 0, 0),
+ MX6_PAD_SD3_CLK__USBOH3_UH2_DFD_OUT_5 = IOMUX_PAD(0x06A4, 0x02BC, 4, 0x0000, 0, 0),
+ MX6_PAD_SD3_CLK__GPIO_7_3 = IOMUX_PAD(0x06A4, 0x02BC, 5, 0x0000, 0, 0),
+ MX6_PAD_SD3_CLK__MIPI_CORE_DPHY_IN_17 = IOMUX_PAD(0x06A4, 0x02BC, 6, 0x0000, 0, 0),
+ MX6_PAD_SD3_CLK__ANATOP_TESTO_14 = IOMUX_PAD(0x06A4, 0x02BC, 7, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT0__USDHC3_DAT0 = IOMUX_PAD(0x06A8, 0x02C0, 0, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT0__UART1_CTS = IOMUX_PAD(0x06A8, 0x02C0, 1, 0x091C, 2, 0),
+ MX6_PAD_SD3_DAT0__CAN2_TXCAN = IOMUX_PAD(0x06A8, 0x02C0, 2, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT0__USBOH3_UH3_DFD_OUT_6 = IOMUX_PAD(0x06A8, 0x02C0, 3, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT0__USBOH3_UH2_DFD_OUT_6 = IOMUX_PAD(0x06A8, 0x02C0, 4, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT0__GPIO_7_4 = IOMUX_PAD(0x06A8, 0x02C0, 5, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT0__MIPI_CORE_DPHY_IN_18 = IOMUX_PAD(0x06A8, 0x02C0, 6, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT0__ANATOP_TESTO_15 = IOMUX_PAD(0x06A8, 0x02C0, 7, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT1__USDHC3_DAT1 = IOMUX_PAD(0x06AC, 0x02C4, 0, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT1__UART1_CTS = IOMUX_PAD(0x06AC, 0x02C4, 1, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT1__UART1_RTS = IOMUX_PAD(0x06AC, 0x02C4, 1, 0x091C, 3, 0),
+ MX6_PAD_SD3_DAT1__CAN2_RXCAN = IOMUX_PAD(0x06AC, 0x02C4, 2, 0x07E8, 1, 0),
+ MX6_PAD_SD3_DAT1__USBOH3_UH3_DFD_OUT_7 = IOMUX_PAD(0x06AC, 0x02C4, 3, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT1__USBOH3_UH2_DFD_OUT_7 = IOMUX_PAD(0x06AC, 0x02C4, 4, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT1__GPIO_7_5 = IOMUX_PAD(0x06AC, 0x02C4, 5, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT1__MIPI_CORE_DPHY_IN_19 = IOMUX_PAD(0x06AC, 0x02C4, 6, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT1__ANATOP_TESTI_0 = IOMUX_PAD(0x06AC, 0x02C4, 7, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT2__USDHC3_DAT2 = IOMUX_PAD(0x06B0, 0x02C8, 0, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT2__PCIE_CTRL_MUX_28 = IOMUX_PAD(0x06B0, 0x02C8, 2, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT2__USBOH3_UH3_DFD_OUT_8 = IOMUX_PAD(0x06B0, 0x02C8, 3, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT2__USBOH3_UH2_DFD_OUT_8 = IOMUX_PAD(0x06B0, 0x02C8, 4, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT2__GPIO_7_6 = IOMUX_PAD(0x06B0, 0x02C8, 5, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT2__MIPI_CORE_DPHY_IN_20 = IOMUX_PAD(0x06B0, 0x02C8, 6, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT2__ANATOP_TESTI_1 = IOMUX_PAD(0x06B0, 0x02C8, 7, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT3__USDHC3_DAT3 = IOMUX_PAD(0x06B4, 0x02CC, 0, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT3__UART3_CTS = IOMUX_PAD(0x06B4, 0x02CC, 1, 0x092C, 4, 0),
+ MX6_PAD_SD3_DAT3__PCIE_CTRL_MUX_29 = IOMUX_PAD(0x06B4, 0x02CC, 2, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT3__USBOH3_UH3_DFD_OUT_9 = IOMUX_PAD(0x06B4, 0x02CC, 3, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT3__USBOH3_UH2_DFD_OUT_9 = IOMUX_PAD(0x06B4, 0x02CC, 4, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT3__GPIO_7_7 = IOMUX_PAD(0x06B4, 0x02CC, 5, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT3__MIPI_CORE_DPHY_IN_21 = IOMUX_PAD(0x06B4, 0x02CC, 6, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT3__ANATOP_TESTI_2 = IOMUX_PAD(0x06B4, 0x02CC, 7, 0x0000, 0, 0),
+ MX6_PAD_SD3_RST__USDHC3_RST = IOMUX_PAD(0x06B8, 0x02D0, 0, 0x0000, 0, 0),
+ MX6_PAD_SD3_RST__UART3_CTS = IOMUX_PAD(0x06B8, 0x02D0, 1, 0x0000, 0, 0),
+ MX6_PAD_SD3_RST__UART3_RTS = IOMUX_PAD(0x06B8, 0x02D0, 1, 0x092C, 5, 0),
+ MX6_PAD_SD3_RST__PCIE_CTRL_MUX_30 = IOMUX_PAD(0x06B8, 0x02D0, 2, 0x0000, 0, 0),
+ MX6_PAD_SD3_RST__USBOH3_UH3_DFD_OUT_10 = IOMUX_PAD(0x06B8, 0x02D0, 3, 0x0000, 0, 0),
+ MX6_PAD_SD3_RST__USBOH3_UH2_DFD_OUT_10 = IOMUX_PAD(0x06B8, 0x02D0, 4, 0x0000, 0, 0),
+ MX6_PAD_SD3_RST__GPIO_7_8 = IOMUX_PAD(0x06B8, 0x02D0, 5, 0x0000, 0, 0),
+ MX6_PAD_SD3_RST__MIPI_CORE_DPHY_IN_22 = IOMUX_PAD(0x06B8, 0x02D0, 6, 0x0000, 0, 0),
+ MX6_PAD_SD3_RST__ANATOP_ANATOP_TESTI_3 = IOMUX_PAD(0x06B8, 0x02D0, 7, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CLE__RAWNAND_CLE = IOMUX_PAD(0x06BC, 0x02D4, 0, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CLE__IPU2_SISG_4 = IOMUX_PAD(0x06BC, 0x02D4, 1, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CLE__PCIE_CTRL_MUX_31 = IOMUX_PAD(0x06BC, 0x02D4, 2, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CLE__USBOH3_UH3_DFD_OT11 = IOMUX_PAD(0x06BC, 0x02D4, 3, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CLE__USBOH3_UH2_DFD_OT11 = IOMUX_PAD(0x06BC, 0x02D4, 4, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CLE__GPIO_6_7 = IOMUX_PAD(0x06BC, 0x02D4, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CLE__MIPI_CORE_DPHY_IN23 = IOMUX_PAD(0x06BC, 0x02D4, 6, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CLE__TPSMP_HTRANS_0 = IOMUX_PAD(0x06BC, 0x02D4, 7, 0x0000, 0, 0),
+ MX6_PAD_NANDF_ALE__RAWNAND_ALE = IOMUX_PAD(0x06C0, 0x02D8, 0, 0x0000, 0, 0),
+ MX6_PAD_NANDF_ALE__USDHC4_RST = IOMUX_PAD(0x06C0, 0x02D8, 1, 0x0000, 0, 0),
+ MX6_PAD_NANDF_ALE__PCIE_CTRL_MUX_0 = IOMUX_PAD(0x06C0, 0x02D8, 2, 0x0000, 0, 0),
+ MX6_PAD_NANDF_ALE__USBOH3_UH3_DFD_OT12 = IOMUX_PAD(0x06C0, 0x02D8, 3, 0x0000, 0, 0),
+ MX6_PAD_NANDF_ALE__USBOH3_UH2_DFD_OT12 = IOMUX_PAD(0x06C0, 0x02D8, 4, 0x0000, 0, 0),
+ MX6_PAD_NANDF_ALE__GPIO_6_8 = IOMUX_PAD(0x06C0, 0x02D8, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_ALE__MIPI_CR_DPHY_IN_24 = IOMUX_PAD(0x06C0, 0x02D8, 6, 0x0000, 0, 0),
+ MX6_PAD_NANDF_ALE__TPSMP_HTRANS_1 = IOMUX_PAD(0x06C0, 0x02D8, 7, 0x0000, 0, 0),
+ MX6_PAD_NANDF_WP_B__RAWNAND_RESETN = IOMUX_PAD(0x06C4, 0x02DC, 0, 0x0000, 0, 0),
+ MX6_PAD_NANDF_WP_B__IPU2_SISG_5 = IOMUX_PAD(0x06C4, 0x02DC, 1, 0x0000, 0, 0),
+ MX6_PAD_NANDF_WP_B__PCIE_CTRL__MUX_1 = IOMUX_PAD(0x06C4, 0x02DC, 2, 0x0000, 0, 0),
+ MX6_PAD_NANDF_WP_B__USBOH3_UH3_DFDOT13 = IOMUX_PAD(0x06C4, 0x02DC, 3, 0x0000, 0, 0),
+ MX6_PAD_NANDF_WP_B__USBOH3_UH2_DFDOT13 = IOMUX_PAD(0x06C4, 0x02DC, 4, 0x0000, 0, 0),
+ MX6_PAD_NANDF_WP_B__GPIO_6_9 = IOMUX_PAD(0x06C4, 0x02DC, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_WP_B__MIPI_CR_DPHY_OUT32 = IOMUX_PAD(0x06C4, 0x02DC, 6, 0x0000, 0, 0),
+ MX6_PAD_NANDF_WP_B__PL301_PER1_HSIZE_0 = IOMUX_PAD(0x06C4, 0x02DC, 7, 0x0000, 0, 0),
+ MX6_PAD_NANDF_RB0__RAWNAND_READY0 = IOMUX_PAD(0x06C8, 0x02E0, 0, 0x0000, 0, 0),
+ MX6_PAD_NANDF_RB0__IPU2_DI0_PIN1 = IOMUX_PAD(0x06C8, 0x02E0, 1, 0x0000, 0, 0),
+ MX6_PAD_NANDF_RB0__PCIE_CTRL_MUX_2 = IOMUX_PAD(0x06C8, 0x02E0, 2, 0x0000, 0, 0),
+ MX6_PAD_NANDF_RB0__USBOH3_UH3_DFD_OT14 = IOMUX_PAD(0x06C8, 0x02E0, 3, 0x0000, 0, 0),
+ MX6_PAD_NANDF_RB0__USBOH3_UH2_DFD_OT14 = IOMUX_PAD(0x06C8, 0x02E0, 4, 0x0000, 0, 0),
+ MX6_PAD_NANDF_RB0__GPIO_6_10 = IOMUX_PAD(0x06C8, 0x02E0, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_RB0__MIPI_CR_DPHY_OUT_33 = IOMUX_PAD(0x06C8, 0x02E0, 6, 0x0000, 0, 0),
+ MX6_PAD_NANDF_RB0__PL301_PER1_HSIZE_1 = IOMUX_PAD(0x06C8, 0x02E0, 7, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS0__RAWNAND_CE0N = IOMUX_PAD(0x06CC, 0x02E4, 0, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS0__USBOH3_UH3_DFD_OT15 = IOMUX_PAD(0x06CC, 0x02E4, 3, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS0__USBOH3_UH2_DFD_OT15 = IOMUX_PAD(0x06CC, 0x02E4, 4, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS0__GPIO_6_11 = IOMUX_PAD(0x06CC, 0x02E4, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS0__PL301_PER1_HSIZE_2 = IOMUX_PAD(0x06CC, 0x02E4, 7, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS1__RAWNAND_CE1N = IOMUX_PAD(0x06D0, 0x02E8, 0, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS1__USDHC4_VSELECT = IOMUX_PAD(0x06D0, 0x02E8, 1, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS1__USDHC3_VSELECT = IOMUX_PAD(0x06D0, 0x02E8, 2, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS1__PCIE_CTRL_MUX_3 = IOMUX_PAD(0x06D0, 0x02E8, 4, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS1__GPIO_6_14 = IOMUX_PAD(0x06D0, 0x02E8, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS1__PL301_PER1_HRDYOUT = IOMUX_PAD(0x06D0, 0x02E8, 7, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS2__RAWNAND_CE2N = IOMUX_PAD(0x06D4, 0x02EC, 0, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS2__IPU1_SISG_0 = IOMUX_PAD(0x06D4, 0x02EC, 1, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS2__ESAI1_TX0 = IOMUX_PAD(0x06D4, 0x02EC, 2, 0x0874, 1, 0),
+ MX6_PAD_NANDF_CS2__WEIM_WEIM_CRE = IOMUX_PAD(0x06D4, 0x02EC, 3, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS2__CCM_CLKO2 = IOMUX_PAD(0x06D4, 0x02EC, 4, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS2__GPIO_6_15 = IOMUX_PAD(0x06D4, 0x02EC, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS2__IPU2_SISG_0 = IOMUX_PAD(0x06D4, 0x02EC, 6, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS3__RAWNAND_CE3N = IOMUX_PAD(0x06D8, 0x02F0, 0, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS3__IPU1_SISG_1 = IOMUX_PAD(0x06D8, 0x02F0, 1, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS3__ESAI1_TX1 = IOMUX_PAD(0x06D8, 0x02F0, 2, 0x0878, 1, 0),
+ MX6_PAD_NANDF_CS3__WEIM_WEIM_A_26 = IOMUX_PAD(0x06D8, 0x02F0, 3, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS3__PCIE_CTRL_MUX_4 = IOMUX_PAD(0x06D8, 0x02F0, 4, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS3__GPIO_6_16 = IOMUX_PAD(0x06D8, 0x02F0, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS3__IPU2_SISG_1 = IOMUX_PAD(0x06D8, 0x02F0, 6, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS3__TPSMP_CLK = IOMUX_PAD(0x06D8, 0x02F0, 7, 0x0000, 0, 0),
+ MX6_PAD_SD4_CMD__USDHC4_CMD = IOMUX_PAD(0x06DC, 0x02F4, 16, 0x0000, 0, 0),
+ MX6_PAD_SD4_CMD__RAWNAND_RDN = IOMUX_PAD(0x06DC, 0x02F4, 1, 0x0000, 0, 0),
+ MX6_PAD_SD4_CMD__UART3_TXD = IOMUX_PAD(0x06DC, 0x02F4, 2, 0x0000, 0, 0),
+ MX6_PAD_SD4_CMD__UART3_TXD_RXD = IOMUX_PAD(0x06DC, 0x02F4, 2, 0x0930, 2, 0),
+ MX6_PAD_SD4_CMD__PCIE_CTRL_MUX_5 = IOMUX_PAD(0x06DC, 0x02F4, 4, 0x0000, 0, 0),
+ MX6_PAD_SD4_CMD__GPIO_7_9 = IOMUX_PAD(0x06DC, 0x02F4, 5, 0x0000, 0, 0),
+ MX6_PAD_SD4_CMD__TPSMP_HDATA_DIR = IOMUX_PAD(0x06DC, 0x02F4, 7, 0x0000, 0, 0),
+ MX6_PAD_SD4_CLK__USDHC4_CLK = IOMUX_PAD(0x06E0, 0x02F8, 0, 0x0000, 0, 0),
+ MX6_PAD_SD4_CLK__RAWNAND_WRN = IOMUX_PAD(0x06E0, 0x02F8, 1, 0x0000, 0, 0),
+ MX6_PAD_SD4_CLK__UART3_RXD = IOMUX_PAD(0x06E0, 0x02F8, 2, 0x0930, 3, 0),
+ MX6_PAD_SD4_CLK__PCIE_CTRL_MUX_6 = IOMUX_PAD(0x06E0, 0x02F8, 4, 0x0000, 0, 0),
+ MX6_PAD_SD4_CLK__GPIO_7_10 = IOMUX_PAD(0x06E0, 0x02F8, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D0__RAWNAND_D0 = IOMUX_PAD(0x06E4, 0x02FC, 0, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D0__USDHC1_DAT4 = IOMUX_PAD(0x06E4, 0x02FC, 1, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D0__GPU3D_GPU_DBG_OUT_0 = IOMUX_PAD(0x06E4, 0x02FC, 2, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D0__USBOH3_UH2_DFD_OUT16 = IOMUX_PAD(0x06E4, 0x02FC, 3, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D0__USBOH3_UH3_DFD_OUT16 = IOMUX_PAD(0x06E4, 0x02FC, 4, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D0__GPIO_2_0 = IOMUX_PAD(0x06E4, 0x02FC, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D0__IPU1_IPU_DIAG_BUS_0 = IOMUX_PAD(0x06E4, 0x02FC, 6, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D0__IPU2_IPU_DIAG_BUS_0 = IOMUX_PAD(0x06E4, 0x02FC, 7, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D1__RAWNAND_D1 = IOMUX_PAD(0x06E8, 0x0300, 0, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D1__USDHC1_DAT5 = IOMUX_PAD(0x06E8, 0x0300, 1, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D1__GPU3D_GPU_DEBUG_OUT1 = IOMUX_PAD(0x06E8, 0x0300, 2, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D1__USBOH3_UH2_DFD_OUT17 = IOMUX_PAD(0x06E8, 0x0300, 3, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D1__USBOH3_UH3_DFD_OUT17 = IOMUX_PAD(0x06E8, 0x0300, 4, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D1__GPIO_2_1 = IOMUX_PAD(0x06E8, 0x0300, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D1__IPU1_IPU_DIAG_BUS_1 = IOMUX_PAD(0x06E8, 0x0300, 6, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D1__IPU2_IPU_DIAG_BUS_1 = IOMUX_PAD(0x06E8, 0x0300, 7, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D2__RAWNAND_D2 = IOMUX_PAD(0x06EC, 0x0304, 0, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D2__USDHC1_DAT6 = IOMUX_PAD(0x06EC, 0x0304, 1, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D2__GPU3D_GPU_DBG_OUT_2 = IOMUX_PAD(0x06EC, 0x0304, 2, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D2__USBOH3_UH2_DFD_OUT18 = IOMUX_PAD(0x06EC, 0x0304, 3, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D2__USBOH3_UH3_DFD_OUT18 = IOMUX_PAD(0x06EC, 0x0304, 4, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D2__GPIO_2_2 = IOMUX_PAD(0x06EC, 0x0304, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D2__IPU1_IPU_DIAG_BUS_2 = IOMUX_PAD(0x06EC, 0x0304, 6, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D2__IPU2_IPU_DIAG_BUS_2 = IOMUX_PAD(0x06EC, 0x0304, 7, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D3__RAWNAND_D3 = IOMUX_PAD(0x06F0, 0x0308, 0, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D3__USDHC1_DAT7 = IOMUX_PAD(0x06F0, 0x0308, 1, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D3__GPU3D_GPU_DBG_OUT_3 = IOMUX_PAD(0x06F0, 0x0308, 2, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D3__USBOH3_UH2_DFD_OUT19 = IOMUX_PAD(0x06F0, 0x0308, 3, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D3__USBOH3_UH3_DFD_OUT19 = IOMUX_PAD(0x06F0, 0x0308, 4, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D3__GPIO_2_3 = IOMUX_PAD(0x06F0, 0x0308, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D3__IPU1_IPU_DIAG_BUS_3 = IOMUX_PAD(0x06F0, 0x0308, 6, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D3__IPU2_IPU_DIAG_BUS_3 = IOMUX_PAD(0x06F0, 0x0308, 7, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D4__RAWNAND_D4 = IOMUX_PAD(0x06F4, 0x030C, 0, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D4__USDHC2_DAT4 = IOMUX_PAD(0x06F4, 0x030C, 1, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D4__GPU3D_GPU_DBG_OUT_4 = IOMUX_PAD(0x06F4, 0x030C, 2, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D4__USBOH3_UH2_DFD_OUT20 = IOMUX_PAD(0x06F4, 0x030C, 3, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D4__USBOH3_UH3_DFD_OUT20 = IOMUX_PAD(0x06F4, 0x030C, 4, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D4__GPIO_2_4 = IOMUX_PAD(0x06F4, 0x030C, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D4__IPU1_IPU_DIAG_BUS_4 = IOMUX_PAD(0x06F4, 0x030C, 6, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D4__IPU2_IPU_DIAG_BUS_4 = IOMUX_PAD(0x06F4, 0x030C, 7, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D5__RAWNAND_D5 = IOMUX_PAD(0x06F8, 0x0310, 0, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D5__USDHC2_DAT5 = IOMUX_PAD(0x06F8, 0x0310, 1, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D5__GPU3D_GPU_DBG_OUT_5 = IOMUX_PAD(0x06F8, 0x0310, 2, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D5__USBOH3_UH2_DFD_OUT21 = IOMUX_PAD(0x06F8, 0x0310, 3, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D5__USBOH3_UH3_DFD_OUT21 = IOMUX_PAD(0x06F8, 0x0310, 4, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D5__GPIO_2_5 = IOMUX_PAD(0x06F8, 0x0310, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D5__IPU1_IPU_DIAG_BUS_5 = IOMUX_PAD(0x06F8, 0x0310, 6, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D5__IPU2_IPU_DIAG_BUS_5 = IOMUX_PAD(0x06F8, 0x0310, 7, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D6__RAWNAND_D6 = IOMUX_PAD(0x06FC, 0x0314, 0, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D6__USDHC2_DAT6 = IOMUX_PAD(0x06FC, 0x0314, 1, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D6__GPU3D_GPU_DBG_OUT_6 = IOMUX_PAD(0x06FC, 0x0314, 2, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D6__USBOH3_UH2_DFD_OUT22 = IOMUX_PAD(0x06FC, 0x0314, 3, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D6__USBOH3_UH3_DFD_OUT22 = IOMUX_PAD(0x06FC, 0x0314, 4, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D6__GPIO_2_6 = IOMUX_PAD(0x06FC, 0x0314, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D6__IPU1_IPU_DIAG_BUS_6 = IOMUX_PAD(0x06FC, 0x0314, 6, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D6__IPU2_IPU_DIAG_BUS_6 = IOMUX_PAD(0x06FC, 0x0314, 7, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D7__RAWNAND_D7 = IOMUX_PAD(0x0700, 0x0318, 0, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D7__USDHC2_DAT7 = IOMUX_PAD(0x0700, 0x0318, 1, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D7__GPU3D_GPU_DBG_OUT_7 = IOMUX_PAD(0x0700, 0x0318, 2, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D7__USBOH3_UH2_DFD_OUT23 = IOMUX_PAD(0x0700, 0x0318, 3, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D7__USBOH3_UH3_DFD_OUT23 = IOMUX_PAD(0x0700, 0x0318, 4, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D7__GPIO_2_7 = IOMUX_PAD(0x0700, 0x0318, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D7__IPU1_IPU_DIAG_BUS_7 = IOMUX_PAD(0x0700, 0x0318, 6, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D7__IPU2_IPU_DIAG_BUS_7 = IOMUX_PAD(0x0700, 0x0318, 7, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT0__RAWNAND_D8 = IOMUX_PAD(0x0704, 0x031C, 0, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT0__USDHC4_DAT0 = IOMUX_PAD(0x0704, 0x031C, 1, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT0__RAWNAND_DQS = IOMUX_PAD(0x0704, 0x031C, 2, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT0__USBOH3_UH2_DFD_OUT24 = IOMUX_PAD(0x0704, 0x031C, 3, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT0__USBOH3_UH3_DFD_OUT24 = IOMUX_PAD(0x0704, 0x031C, 4, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT0__GPIO_2_8 = IOMUX_PAD(0x0704, 0x031C, 5, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT0__IPU1_IPU_DIAG_BUS_8 = IOMUX_PAD(0x0704, 0x031C, 6, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT0__IPU2_IPU_DIAG_BUS_8 = IOMUX_PAD(0x0704, 0x031C, 7, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT1__RAWNAND_D9 = IOMUX_PAD(0x0708, 0x0320, 0, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT1__USDHC4_DAT1 = IOMUX_PAD(0x0708, 0x0320, 1, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT1__PWM3_PWMO = IOMUX_PAD(0x0708, 0x0320, 2, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT1__USBOH3_UH2_DFD_OUT25 = IOMUX_PAD(0x0708, 0x0320, 3, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT1__USBOH3_UH3_DFD_OUT25 = IOMUX_PAD(0x0708, 0x0320, 4, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT1__GPIO_2_9 = IOMUX_PAD(0x0708, 0x0320, 5, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT1__IPU1_IPU_DIAG_BUS_9 = IOMUX_PAD(0x0708, 0x0320, 6, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT1__IPU2_IPU_DIAG_BUS_9 = IOMUX_PAD(0x0708, 0x0320, 7, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT2__RAWNAND_D10 = IOMUX_PAD(0x070C, 0x0324, 0, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT2__USDHC4_DAT2 = IOMUX_PAD(0x070C, 0x0324, 1, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT2__PWM4_PWMO = IOMUX_PAD(0x070C, 0x0324, 2, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT2__USBOH3_UH2_DFD_OUT26 = IOMUX_PAD(0x070C, 0x0324, 3, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT2__USBOH3_UH3_DFD_OUT26 = IOMUX_PAD(0x070C, 0x0324, 4, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT2__GPIO_2_10 = IOMUX_PAD(0x070C, 0x0324, 5, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT2__IPU1_IPU_DIAG_BUS_10 = IOMUX_PAD(0x070C, 0x0324, 6, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT2__IPU2_IPU_DIAG_BUS_10 = IOMUX_PAD(0x070C, 0x0324, 7, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT3__RAWNAND_D11 = IOMUX_PAD(0x0710, 0x0328, 0, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT3__USDHC4_DAT3 = IOMUX_PAD(0x0710, 0x0328, 1, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT3__USBOH3_UH2_DFD_OUT27 = IOMUX_PAD(0x0710, 0x0328, 3, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT3__USBOH3_UH3_DFD_OUT27 = IOMUX_PAD(0x0710, 0x0328, 4, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT3__GPIO_2_11 = IOMUX_PAD(0x0710, 0x0328, 5, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT3__IPU1_IPU_DIAG_BUS_11 = IOMUX_PAD(0x0710, 0x0328, 6, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT3__IPU2_IPU_DIAG_BUS_11 = IOMUX_PAD(0x0710, 0x0328, 7, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT4__RAWNAND_D12 = IOMUX_PAD(0x0714, 0x032C, 0, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT4__USDHC4_DAT4 = IOMUX_PAD(0x0714, 0x032C, 1, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT4__UART2_RXD = IOMUX_PAD(0x0714, 0x032C, 2, 0x0928, 6, 0),
+ MX6_PAD_SD4_DAT4__USBOH3_UH2_DFD_OUT28 = IOMUX_PAD(0x0714, 0x032C, 3, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT4__USBOH3_UH3_DFD_OUT28 = IOMUX_PAD(0x0714, 0x032C, 4, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT4__GPIO_2_12 = IOMUX_PAD(0x0714, 0x032C, 5, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT4__IPU1_IPU_DIAG_BUS_12 = IOMUX_PAD(0x0714, 0x032C, 6, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT4__IPU2_IPU_DIAG_BUS_12 = IOMUX_PAD(0x0714, 0x032C, 7, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT5__RAWNAND_D13 = IOMUX_PAD(0x0718, 0x0330, 0, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT5__USDHC4_DAT5 = IOMUX_PAD(0x0718, 0x0330, 1, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT5__UART2_CTS = IOMUX_PAD(0x0718, 0x0330, 2, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT5__UART2_RTS = IOMUX_PAD(0x0718, 0x0330, 2, 0x0924, 4, 0),
+ MX6_PAD_SD4_DAT5__USBOH3_UH2_DFD_OUT29 = IOMUX_PAD(0x0718, 0x0330, 3, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT5__USBOH3_UH3_DFD_OUT29 = IOMUX_PAD(0x0718, 0x0330, 4, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT5__GPIO_2_13 = IOMUX_PAD(0x0718, 0x0330, 5, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT5__IPU1_IPU_DIAG_BUS_13 = IOMUX_PAD(0x0718, 0x0330, 6, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT5__IPU2_IPU_DIAG_BUS_13 = IOMUX_PAD(0x0718, 0x0330, 7, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT6__RAWNAND_D14 = IOMUX_PAD(0x071C, 0x0334, 0, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT6__USDHC4_DAT6 = IOMUX_PAD(0x071C, 0x0334, 1, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT6__UART2_CTS = IOMUX_PAD(0x071C, 0x0334, 2, 0x0924, 5, 0),
+ MX6_PAD_SD4_DAT6__USBOH3_UH2_DFD_OUT30 = IOMUX_PAD(0x071C, 0x0334, 3, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT6__USBOH3_UH3_DFD_OUT30 = IOMUX_PAD(0x071C, 0x0334, 4, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT6__GPIO_2_14 = IOMUX_PAD(0x071C, 0x0334, 5, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT6__IPU1_IPU_DIAG_BUS_14 = IOMUX_PAD(0x071C, 0x0334, 6, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT6__IPU2_IPU_DIAG_BUS_14 = IOMUX_PAD(0x071C, 0x0334, 7, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT7__RAWNAND_D15 = IOMUX_PAD(0x0720, 0x0338, 0, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT7__USDHC4_DAT7 = IOMUX_PAD(0x0720, 0x0338, 1, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT7__UART2_TXD = IOMUX_PAD(0x0720, 0x0338, 2, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT7__UART2_TXD_RXD = IOMUX_PAD(0x0720, 0x0338, 2, 0x0928, 7, 0),
+ MX6_PAD_SD4_DAT7__USBOH3_UH2_DFD_OUT31 = IOMUX_PAD(0x0720, 0x0338, 3, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT7__USBOH3_UH3_DFD_OUT31 = IOMUX_PAD(0x0720, 0x0338, 4, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT7__GPIO_2_15 = IOMUX_PAD(0x0720, 0x0338, 5, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT7__IPU1_IPU_DIAG_BUS_15 = IOMUX_PAD(0x0720, 0x0338, 6, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT7__IPU2_IPU_DIAG_BUS_15 = IOMUX_PAD(0x0720, 0x0338, 7, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT1__USDHC1_DAT1 = IOMUX_PAD(0x0724, 0x033C, 0, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT1__ECSPI5_SS0 = IOMUX_PAD(0x0724, 0x033C, 1, 0x0834, 1, 0),
+ MX6_PAD_SD1_DAT1__PWM3_PWMO = IOMUX_PAD(0x0724, 0x033C, 2, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT1__GPT_CAPIN2 = IOMUX_PAD(0x0724, 0x033C, 3, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT1__PCIE_CTRL_MUX_7 = IOMUX_PAD(0x0724, 0x033C, 4, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT1__GPIO_1_17 = IOMUX_PAD(0x0724, 0x033C, 5, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT1__HDMI_TX_OPHYDTB_0 = IOMUX_PAD(0x0724, 0x033C, 6, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT1__ANATOP_TESTO_8 = IOMUX_PAD(0x0724, 0x033C, 7, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT0__USDHC1_DAT0 = IOMUX_PAD(0x0728, 0x0340, 0, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT0__ECSPI5_MISO = IOMUX_PAD(0x0728, 0x0340, 1, 0x082C, 1, 0),
+ MX6_PAD_SD1_DAT0__CAAM_WRAP_RNG_OSCOBS = IOMUX_PAD(0x0728, 0x0340, 2, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT0__GPT_CAPIN1 = IOMUX_PAD(0x0728, 0x0340, 3, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT0__PCIE_CTRL_MUX_8 = IOMUX_PAD(0x0728, 0x0340, 4, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT0__GPIO_1_16 = IOMUX_PAD(0x0728, 0x0340, 5, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT0__HDMI_TX_OPHYDTB_1 = IOMUX_PAD(0x0728, 0x0340, 6, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT0__ANATOP_TESTO_7 = IOMUX_PAD(0x0728, 0x0340, 7, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT3__USDHC1_DAT3 = IOMUX_PAD(0x072C, 0x0344, 0, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT3__ECSPI5_SS2 = IOMUX_PAD(0x072C, 0x0344, 1, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT3__GPT_CMPOUT3 = IOMUX_PAD(0x072C, 0x0344, 2, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT3__PWM1_PWMO = IOMUX_PAD(0x072C, 0x0344, 3, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT3__WDOG2_WDOG_B = IOMUX_PAD(0x072C, 0x0344, 4, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT3__GPIO_1_21 = IOMUX_PAD(0x072C, 0x0344, 5, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT3__WDOG2_WDOG_RST_B_DEB = IOMUX_PAD(0x072C, 0x0344, 6, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT3__ANATOP_TESTO_6 = IOMUX_PAD(0x072C, 0x0344, 7, 0x0000, 0, 0),
+ MX6_PAD_SD1_CMD__USDHC1_CMD = IOMUX_PAD(0x0730, 0x0348, 16, 0x0000, 0, 0),
+ MX6_PAD_SD1_CMD__ECSPI5_MOSI = IOMUX_PAD(0x0730, 0x0348, 1, 0x0830, 0, 0),
+ MX6_PAD_SD1_CMD__PWM4_PWMO = IOMUX_PAD(0x0730, 0x0348, 2, 0x0000, 0, 0),
+ MX6_PAD_SD1_CMD__GPT_CMPOUT1 = IOMUX_PAD(0x0730, 0x0348, 3, 0x0000, 0, 0),
+ MX6_PAD_SD1_CMD__GPIO_1_18 = IOMUX_PAD(0x0730, 0x0348, 5, 0x0000, 0, 0),
+ MX6_PAD_SD1_CMD__ANATOP_TESTO_5 = IOMUX_PAD(0x0730, 0x0348, 7, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT2__USDHC1_DAT2 = IOMUX_PAD(0x0734, 0x034C, 0, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT2__ECSPI5_SS1 = IOMUX_PAD(0x0734, 0x034C, 1, 0x0838, 1, 0),
+ MX6_PAD_SD1_DAT2__GPT_CMPOUT2 = IOMUX_PAD(0x0734, 0x034C, 2, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT2__PWM2_PWMO = IOMUX_PAD(0x0734, 0x034C, 3, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT2__WDOG1_WDOG_B = IOMUX_PAD(0x0734, 0x034C, 4, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT2__GPIO_1_19 = IOMUX_PAD(0x0734, 0x034C, 5, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT2__WDOG1_WDOG_RST_B_DEB = IOMUX_PAD(0x0734, 0x034C, 6, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT2__ANATOP_TESTO_4 = IOMUX_PAD(0x0734, 0x034C, 7, 0x0000, 0, 0),
+ MX6_PAD_SD1_CLK__USDHC1_CLK = IOMUX_PAD(0x0738, 0x0350, 0, 0x0000, 0, 0),
+ MX6_PAD_SD1_CLK__ECSPI5_SCLK = IOMUX_PAD(0x0738, 0x0350, 1, 0x0828, 0, 0),
+ MX6_PAD_SD1_CLK__OSC32K_32K_OUT = IOMUX_PAD(0x0738, 0x0350, 2, 0x0000, 0, 0),
+ MX6_PAD_SD1_CLK__GPT_CLKIN = IOMUX_PAD(0x0738, 0x0350, 3, 0x0000, 0, 0),
+ MX6_PAD_SD1_CLK__GPIO_1_20 = IOMUX_PAD(0x0738, 0x0350, 5, 0x0000, 0, 0),
+ MX6_PAD_SD1_CLK__PHY_DTB_0 = IOMUX_PAD(0x0738, 0x0350, 6, 0x0000, 0, 0),
+ MX6_PAD_SD1_CLK__SATA_PHY_DTB_0 = IOMUX_PAD(0x0738, 0x0350, 7, 0x0000, 0, 0),
+ MX6_PAD_SD2_CLK__USDHC2_CLK = IOMUX_PAD(0x073C, 0x0354, 0, 0x0000, 0, 0),
+ MX6_PAD_SD2_CLK__ECSPI5_SCLK = IOMUX_PAD(0x073C, 0x0354, 1, 0x0828, 1, 0),
+ MX6_PAD_SD2_CLK__KPP_COL_5 = IOMUX_PAD(0x073C, 0x0354, 2, 0x08E8, 3, 0),
+ MX6_PAD_SD2_CLK__AUDMUX_AUD4_RXFS = IOMUX_PAD(0x073C, 0x0354, 3, 0x07C0, 1, 0),
+ MX6_PAD_SD2_CLK__PCIE_CTRL_MUX_9 = IOMUX_PAD(0x073C, 0x0354, 4, 0x0000, 0, 0),
+ MX6_PAD_SD2_CLK__GPIO_1_10 = IOMUX_PAD(0x073C, 0x0354, 5, 0x0000, 0, 0),
+ MX6_PAD_SD2_CLK__PHY_DTB_1 = IOMUX_PAD(0x073C, 0x0354, 6, 0x0000, 0, 0),
+ MX6_PAD_SD2_CLK__SATA_PHY_DTB_1 = IOMUX_PAD(0x073C, 0x0354, 7, 0x0000, 0, 0),
+ MX6_PAD_SD2_CMD__USDHC2_CMD = IOMUX_PAD(0x0740, 0x0358, 16, 0x0000, 0, 0),
+ MX6_PAD_SD2_CMD__ECSPI5_MOSI = IOMUX_PAD(0x0740, 0x0358, 1, 0x0830, 1, 0),
+ MX6_PAD_SD2_CMD__KPP_ROW_5 = IOMUX_PAD(0x0740, 0x0358, 2, 0x08F4, 2, 0),
+ MX6_PAD_SD2_CMD__AUDMUX_AUD4_RXC = IOMUX_PAD(0x0740, 0x0358, 3, 0x07BC, 1, 0),
+ MX6_PAD_SD2_CMD__PCIE_CTRL_MUX_10 = IOMUX_PAD(0x0740, 0x0358, 4, 0x0000, 0, 0),
+ MX6_PAD_SD2_CMD__GPIO_1_11 = IOMUX_PAD(0x0740, 0x0358, 5, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT3__USDHC2_DAT3 = IOMUX_PAD(0x0744, 0x035C, 0, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT3__ECSPI5_SS3 = IOMUX_PAD(0x0744, 0x035C, 1, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT3__KPP_COL_6 = IOMUX_PAD(0x0744, 0x035C, 2, 0x08EC, 2, 0),
+ MX6_PAD_SD2_DAT3__AUDMUX_AUD4_TXC = IOMUX_PAD(0x0744, 0x035C, 3, 0x07C4, 1, 0),
+ MX6_PAD_SD2_DAT3__PCIE_CTRL_MUX_11 = IOMUX_PAD(0x0744, 0x035C, 4, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT3__GPIO_1_12 = IOMUX_PAD(0x0744, 0x035C, 5, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT3__SJC_DONE = IOMUX_PAD(0x0744, 0x035C, 6, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT3__ANATOP_TESTO_3 = IOMUX_PAD(0x0744, 0x035C, 7, 0x0000, 0, 0),
+};
+
+#endif /* __ASM_ARCH_MX6_MX6Q_PINS_H__ */
diff --git a/arch/arm/include/asm/arch-mx6/mx6x_pins.h b/arch/arm/include/asm/arch-mx6/mx6x_pins.h
deleted file mode 100644
index 3ade8dc..0000000
--- a/arch/arm/include/asm/arch-mx6/mx6x_pins.h
+++ /dev/null
@@ -1,1671 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Auto Generate file, please don't edit it
- *
- */
-
-#ifndef __ASM_ARCH_MX6_MX6X_PINS_H__
-#define __ASM_ARCH_MX6_MX6X_PINS_H__
-
-#include <asm/imx-common/iomux-v3.h>
-
-/* Use to set PAD control */
-#define PAD_CTL_HYS (1 << 16)
-#define PAD_CTL_PUS_100K_DOWN (0 << 14)
-#define PAD_CTL_PUS_47K_UP (1 << 14)
-#define PAD_CTL_PUS_100K_UP (2 << 14)
-#define PAD_CTL_PUS_22K_UP (3 << 14)
-
-#define PAD_CTL_PUE (1 << 13)
-#define PAD_CTL_PKE (1 << 12)
-#define PAD_CTL_ODE (1 << 11)
-#define PAD_CTL_SPEED_LOW (1 << 6)
-#define PAD_CTL_SPEED_MED (2 << 6)
-#define PAD_CTL_SPEED_HIGH (3 << 6)
-#define PAD_CTL_DSE_DISABLE (0 << 3)
-#define PAD_CTL_DSE_240ohm (1 << 3)
-#define PAD_CTL_DSE_120ohm (2 << 3)
-#define PAD_CTL_DSE_80ohm (3 << 3)
-#define PAD_CTL_DSE_60ohm (4 << 3)
-#define PAD_CTL_DSE_48ohm (5 << 3)
-#define PAD_CTL_DSE_40ohm (6 << 3)
-#define PAD_CTL_DSE_34ohm (7 << 3)
-#define PAD_CTL_SRE_FAST (1 << 0)
-#define PAD_CTL_SRE_SLOW (0 << 0)
-
-#define NO_MUX_I 0
-#define NO_PAD_I 0
-
-enum {
- MX6Q_PAD_SD2_DAT1__USDHC2_DAT1 = IOMUX_PAD(0x0360, 0x004C, 0, 0x0000, 0, 0),
- MX6Q_PAD_SD2_DAT1__ECSPI5_SS0 = IOMUX_PAD(0x0360, 0x004C, 1, 0x0834, 0, 0),
- MX6Q_PAD_SD2_DAT1__WEIM_WEIM_CS_2 = IOMUX_PAD(0x0360, 0x004C, 2, 0x0000, 0, 0),
- MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS = IOMUX_PAD(0x0360, 0x004C, 3, 0x07C8, 0, 0),
- MX6Q_PAD_SD2_DAT1__KPP_COL_7 = IOMUX_PAD(0x0360, 0x004C, 4, 0x08F0, 0, 0),
- MX6Q_PAD_SD2_DAT1__GPIO_1_14 = IOMUX_PAD(0x0360, 0x004C, 5, 0x0000, 0, 0),
- MX6Q_PAD_SD2_DAT1__CCM_WAIT = IOMUX_PAD(0x0360, 0x004C, 6, 0x0000, 0, 0),
- MX6Q_PAD_SD2_DAT1__ANATOP_TESTO_0 = IOMUX_PAD(0x0360, 0x004C, 7, 0x0000, 0, 0),
- MX6Q_PAD_SD2_DAT2__USDHC2_DAT2 = IOMUX_PAD(0x0364, 0x0050, 0, 0x0000, 0, 0),
- MX6Q_PAD_SD2_DAT2__ECSPI5_SS1 = IOMUX_PAD(0x0364, 0x0050, 1, 0x0838, 0, 0),
- MX6Q_PAD_SD2_DAT2__WEIM_WEIM_CS_3 = IOMUX_PAD(0x0364, 0x0050, 2, 0x0000, 0, 0),
- MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD = IOMUX_PAD(0x0364, 0x0050, 3, 0x07B8, 0, 0),
- MX6Q_PAD_SD2_DAT2__KPP_ROW_6 = IOMUX_PAD(0x0364, 0x0050, 4, 0x08F8, 0, 0),
- MX6Q_PAD_SD2_DAT2__GPIO_1_13 = IOMUX_PAD(0x0364, 0x0050, 5, 0x0000, 0, 0),
- MX6Q_PAD_SD2_DAT2__CCM_STOP = IOMUX_PAD(0x0364, 0x0050, 6, 0x0000, 0, 0),
- MX6Q_PAD_SD2_DAT2__ANATOP_TESTO_1 = IOMUX_PAD(0x0364, 0x0050, 7, 0x0000, 0, 0),
- MX6Q_PAD_SD2_DAT0__USDHC2_DAT0 = IOMUX_PAD(0x0368, 0x0054, 0, 0x0000, 0, 0),
- MX6Q_PAD_SD2_DAT0__ECSPI5_MISO = IOMUX_PAD(0x0368, 0x0054, 1, 0x082C, 0, 0),
- MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD = IOMUX_PAD(0x0368, 0x0054, 3, 0x07B4, 0, 0),
- MX6Q_PAD_SD2_DAT0__KPP_ROW_7 = IOMUX_PAD(0x0368, 0x0054, 4, 0x08FC, 0, 0),
- MX6Q_PAD_SD2_DAT0__GPIO_1_15 = IOMUX_PAD(0x0368, 0x0054, 5, 0x0000, 0, 0),
- MX6Q_PAD_SD2_DAT0__DCIC2_DCIC_OUT = IOMUX_PAD(0x0368, 0x0054, 6, 0x0000, 0, 0),
- MX6Q_PAD_SD2_DAT0__TESTO_2 = IOMUX_PAD(0x0368, 0x0054, 7, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_TXC__USBOH3_H2_DATA = IOMUX_PAD(0x036C, 0x0058, 0, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC = IOMUX_PAD(0x036C, 0x0058, 1, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_TXC__SPDIF_SPDIF_EXTCLK = IOMUX_PAD(0x036C, 0x0058, 2, 0x0918, 0, 0),
- MX6Q_PAD_RGMII_TXC__GPIO_6_19 = IOMUX_PAD(0x036C, 0x0058, 5, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_TXC__MIPI_CORE_DPHY_IN_0 = IOMUX_PAD(0x036C, 0x0058, 6, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_TXC__ANATOP_24M_OUT = IOMUX_PAD(0x036C, 0x0058, 7, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_TD0__MIPI_HSI_CRL_TX_RDY = IOMUX_PAD(0x0370, 0x005C, 0, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 = IOMUX_PAD(0x0370, 0x005C, 1, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_TD0__GPIO_6_20 = IOMUX_PAD(0x0370, 0x005C, 5, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_TD0__MIPI_CORE_DPHY_IN_1 = IOMUX_PAD(0x0370, 0x005C, 6, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_TD1__MIPI_HSI_CRL_RX_FLG = IOMUX_PAD(0x0374, 0x0060, 0, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 = IOMUX_PAD(0x0374, 0x0060, 1, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_TD1__GPIO_6_21 = IOMUX_PAD(0x0374, 0x0060, 5, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_TD1__MIPI_CORE_DPHY_IN_2 = IOMUX_PAD(0x0374, 0x0060, 6, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_TD1__CCM_PLL3_BYP = IOMUX_PAD(0x0374, 0x0060, 7, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_TD2__MIPI_HSI_CRL_RX_DTA = IOMUX_PAD(0x0378, 0x0064, 0, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 = IOMUX_PAD(0x0378, 0x0064, 1, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_TD2__GPIO_6_22 = IOMUX_PAD(0x0378, 0x0064, 5, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_TD2__MIPI_CORE_DPHY_IN_3 = IOMUX_PAD(0x0378, 0x0064, 6, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_TD2__CCM_PLL2_BYP = IOMUX_PAD(0x0378, 0x0064, 7, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_TD3__MIPI_HSI_CRL_RX_WAK = IOMUX_PAD(0x037C, 0x0068, 0, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 = IOMUX_PAD(0x037C, 0x0068, 1, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_TD3__GPIO_6_23 = IOMUX_PAD(0x037C, 0x0068, 5, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_TD3__MIPI_CORE_DPHY_IN_4 = IOMUX_PAD(0x037C, 0x0068, 6, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_RX_CTL__USBOH3_H3_DATA = IOMUX_PAD(0x0380, 0x006C, 0, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL = IOMUX_PAD(0x0380, 0x006C, 1, 0x0858, 0, 0),
- MX6Q_PAD_RGMII_RX_CTL__GPIO_6_24 = IOMUX_PAD(0x0380, 0x006C, 5, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_RX_CTL__MIPI_DPHY_IN_5 = IOMUX_PAD(0x0380, 0x006C, 6, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_RD0__MIPI_HSI_CRL_RX_RDY = IOMUX_PAD(0x0384, 0x0070, 0, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 = IOMUX_PAD(0x0384, 0x0070, 1, 0x0848, 0, 0),
- MX6Q_PAD_RGMII_RD0__GPIO_6_25 = IOMUX_PAD(0x0384, 0x0070, 5, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_RD0__MIPI_CORE_DPHY_IN_6 = IOMUX_PAD(0x0384, 0x0070, 6, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_TX_CTL__USBOH3_H2_STROBE = IOMUX_PAD(0x0388, 0x0074, 0, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL = IOMUX_PAD(0x0388, 0x0074, 1, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_TX_CTL__GPIO_6_26 = IOMUX_PAD(0x0388, 0x0074, 5, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_TX_CTL__CORE_DPHY_IN_7 = IOMUX_PAD(0x0388, 0x0074, 6, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_TX_CTL__ANATOP_REF_OUT = IOMUX_PAD(0x0388, 0x0074, 7, 0x083C, 0, 0),
- MX6Q_PAD_RGMII_RD1__MIPI_HSI_CTRL_TX_FL = IOMUX_PAD(0x038C, 0x0078, 0, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 = IOMUX_PAD(0x038C, 0x0078, 1, 0x084C, 0, 0),
- MX6Q_PAD_RGMII_RD1__GPIO_6_27 = IOMUX_PAD(0x038C, 0x0078, 5, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_RD1__CORE_DPHY_TEST_IN_8 = IOMUX_PAD(0x038C, 0x0078, 6, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_RD1__SJC_FAIL = IOMUX_PAD(0x038C, 0x0078, 7, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_RD2__MIPI_HSI_CRL_TX_DTA = IOMUX_PAD(0x0390, 0x007C, 0, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 = IOMUX_PAD(0x0390, 0x007C, 1, 0x0850, 0, 0),
- MX6Q_PAD_RGMII_RD2__GPIO_6_28 = IOMUX_PAD(0x0390, 0x007C, 5, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_RD2__MIPI_CORE_DPHY_IN_9 = IOMUX_PAD(0x0390, 0x007C, 6, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_RD3__MIPI_HSI_CRL_TX_WAK = IOMUX_PAD(0x0394, 0x0080, 0, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 = IOMUX_PAD(0x0394, 0x0080, 1, 0x0854, 0, 0),
- MX6Q_PAD_RGMII_RD3__GPIO_6_29 = IOMUX_PAD(0x0394, 0x0080, 5, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_RD3__MIPI_CORE_DPHY_IN10 = IOMUX_PAD(0x0394, 0x0080, 6, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_RXC__USBOH3_H3_STROBE = IOMUX_PAD(0x0398, 0x0084, 0, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC = IOMUX_PAD(0x0398, 0x0084, 1, 0x0844, 0, 0),
- MX6Q_PAD_RGMII_RXC__GPIO_6_30 = IOMUX_PAD(0x0398, 0x0084, 5, 0x0000, 0, 0),
- MX6Q_PAD_RGMII_RXC__MIPI_CORE_DPHY_IN11 = IOMUX_PAD(0x0398, 0x0084, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A25__WEIM_WEIM_A_25 = IOMUX_PAD(0x039C, 0x0088, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A25__ECSPI4_SS1 = IOMUX_PAD(0x039C, 0x0088, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A25__ECSPI2_RDY = IOMUX_PAD(0x039C, 0x0088, 2, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A25__IPU1_DI1_PIN12 = IOMUX_PAD(0x039C, 0x0088, 3, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A25__IPU1_DI0_D1_CS = IOMUX_PAD(0x039C, 0x0088, 4, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A25__GPIO_5_2 = IOMUX_PAD(0x039C, 0x0088, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A25__HDMI_TX_CEC_LINE = IOMUX_PAD(0x039C, 0x0088, 6, 0x088C, 0, 0),
- MX6Q_PAD_EIM_A25__PL301_PER1_HBURST_0 = IOMUX_PAD(0x039C, 0x0088, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_EB2__WEIM_WEIM_EB_2 = IOMUX_PAD(0x03A0, 0x008C, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_EB2__ECSPI1_SS0 = IOMUX_PAD(0x03A0, 0x008C, 1, 0x0800, 0, 0),
- MX6Q_PAD_EIM_EB2__CCM_DI1_EXT_CLK = IOMUX_PAD(0x03A0, 0x008C, 2, 0x07EC, 0, 0),
- MX6Q_PAD_EIM_EB2__IPU2_CSI1_D_19 = IOMUX_PAD(0x03A0, 0x008C, 3, 0x08D4, 0, 0),
- MX6Q_PAD_EIM_EB2__HDMI_TX_DDC_SCL = IOMUX_PAD(0x03A0, 0x008C, 4, 0x0890, 0, 0),
- MX6Q_PAD_EIM_EB2__GPIO_2_30 = IOMUX_PAD(0x03A0, 0x008C, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_EB2__I2C2_SCL = IOMUX_PAD(0x03A0, 0x008C, 22, 0x08A0, 0, 0),
- MX6Q_PAD_EIM_EB2__SRC_BT_CFG_30 = IOMUX_PAD(0x03A0, 0x008C, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D16__WEIM_WEIM_D_16 = IOMUX_PAD(0x03A4, 0x0090, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D16__ECSPI1_SCLK = IOMUX_PAD(0x03A4, 0x0090, 1, 0x07F4, 0, 0),
- MX6Q_PAD_EIM_D16__IPU1_DI0_PIN5 = IOMUX_PAD(0x03A4, 0x0090, 2, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D16__IPU2_CSI1_D_18 = IOMUX_PAD(0x03A4, 0x0090, 3, 0x08D0, 0, 0),
- MX6Q_PAD_EIM_D16__HDMI_TX_DDC_SDA = IOMUX_PAD(0x03A4, 0x0090, 4, 0x0894, 0, 0),
- MX6Q_PAD_EIM_D16__GPIO_3_16 = IOMUX_PAD(0x03A4, 0x0090, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D16__I2C2_SDA = IOMUX_PAD(0x03A4, 0x0090, 22, 0x08A4, 0, 0),
- MX6Q_PAD_EIM_D17__WEIM_WEIM_D_17 = IOMUX_PAD(0x03A8, 0x0094, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D17__ECSPI1_MISO = IOMUX_PAD(0x03A8, 0x0094, 1, 0x07F8, 0, 0),
- MX6Q_PAD_EIM_D17__IPU1_DI0_PIN6 = IOMUX_PAD(0x03A8, 0x0094, 2, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D17__IPU2_CSI1_PIXCLK = IOMUX_PAD(0x03A8, 0x0094, 3, 0x08E0, 0, 0),
- MX6Q_PAD_EIM_D17__DCIC1_DCIC_OUT = IOMUX_PAD(0x03A8, 0x0094, 4, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D17__GPIO_3_17 = IOMUX_PAD(0x03A8, 0x0094, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D17__I2C3_SCL = IOMUX_PAD(0x03A8, 0x0094, 22, 0x08A8, 0, 0),
- MX6Q_PAD_EIM_D17__PL301_PER1_HBURST_1 = IOMUX_PAD(0x03A8, 0x0094, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D18__WEIM_WEIM_D_18 = IOMUX_PAD(0x03AC, 0x0098, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D18__ECSPI1_MOSI = IOMUX_PAD(0x03AC, 0x0098, 1, 0x07FC, 0, 0),
- MX6Q_PAD_EIM_D18__IPU1_DI0_PIN7 = IOMUX_PAD(0x03AC, 0x0098, 2, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D18__IPU2_CSI1_D_17 = IOMUX_PAD(0x03AC, 0x0098, 3, 0x08CC, 0, 0),
- MX6Q_PAD_EIM_D18__IPU1_DI1_D0_CS = IOMUX_PAD(0x03AC, 0x0098, 4, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D18__GPIO_3_18 = IOMUX_PAD(0x03AC, 0x0098, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D18__I2C3_SDA = IOMUX_PAD(0x03AC, 0x0098, 22, 0x08AC, 0, 0),
- MX6Q_PAD_EIM_D18__PL301_PER1_HBURST_2 = IOMUX_PAD(0x03AC, 0x0098, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D19__WEIM_WEIM_D_19 = IOMUX_PAD(0x03B0, 0x009C, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D19__ECSPI1_SS1 = IOMUX_PAD(0x03B0, 0x009C, 1, 0x0804, 0, 0),
- MX6Q_PAD_EIM_D19__IPU1_DI0_PIN8 = IOMUX_PAD(0x03B0, 0x009C, 2, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D19__IPU2_CSI1_D_16 = IOMUX_PAD(0x03B0, 0x009C, 3, 0x08C8, 0, 0),
- MX6Q_PAD_EIM_D19__UART1_CTS = IOMUX_PAD(0x03B0, 0x009C, 4, 0x091C, 0, 0),
- MX6Q_PAD_EIM_D19__GPIO_3_19 = IOMUX_PAD(0x03B0, 0x009C, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D19__EPIT1_EPITO = IOMUX_PAD(0x03B0, 0x009C, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D19__PL301MX6QPER1_HRESP = IOMUX_PAD(0x03B0, 0x009C, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D20__WEIM_WEIM_D_20 = IOMUX_PAD(0x03B4, 0x00A0, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D20__ECSPI4_SS0 = IOMUX_PAD(0x03B4, 0x00A0, 1, 0x0824, 0, 0),
- MX6Q_PAD_EIM_D20__IPU1_DI0_PIN16 = IOMUX_PAD(0x03B4, 0x00A0, 2, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D20__IPU2_CSI1_D_15 = IOMUX_PAD(0x03B4, 0x00A0, 3, 0x08C4, 0, 0),
- MX6Q_PAD_EIM_D20__UART1_CTS = IOMUX_PAD(0x03B4, 0x00A0, 4, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D20__UART1_RTS = IOMUX_PAD(0x03B4, 0x00A0, 4, 0x091C, 1, 0),
- MX6Q_PAD_EIM_D20__GPIO_3_20 = IOMUX_PAD(0x03B4, 0x00A0, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D20__EPIT2_EPITO = IOMUX_PAD(0x03B4, 0x00A0, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D21__WEIM_WEIM_D_21 = IOMUX_PAD(0x03B8, 0x00A4, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D21__ECSPI4_SCLK = IOMUX_PAD(0x03B8, 0x00A4, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D21__IPU1_DI0_PIN17 = IOMUX_PAD(0x03B8, 0x00A4, 2, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D21__IPU2_CSI1_D_11 = IOMUX_PAD(0x03B8, 0x00A4, 3, 0x08B4, 0, 0),
- MX6Q_PAD_EIM_D21__USBOH3_USBOTG_OC = IOMUX_PAD(0x03B8, 0x00A4, 4, 0x0944, 0, 0),
- MX6Q_PAD_EIM_D21__GPIO_3_21 = IOMUX_PAD(0x03B8, 0x00A4, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D21__I2C1_SCL = IOMUX_PAD(0x03B8, 0x00A4, 22, 0x0898, 0, 0),
- MX6Q_PAD_EIM_D21__SPDIF_IN1 = IOMUX_PAD(0x03B8, 0x00A4, 7, 0x0914, 0, 0),
- MX6Q_PAD_EIM_D22__WEIM_WEIM_D_22 = IOMUX_PAD(0x03BC, 0x00A8, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D22__ECSPI4_MISO = IOMUX_PAD(0x03BC, 0x00A8, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D22__IPU1_DI0_PIN1 = IOMUX_PAD(0x03BC, 0x00A8, 2, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D22__IPU2_CSI1_D_10 = IOMUX_PAD(0x03BC, 0x00A8, 3, 0x08B0, 0, 0),
- MX6Q_PAD_EIM_D22__USBOH3_USBOTG_PWR = IOMUX_PAD(0x03BC, 0x00A8, 4, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D22__GPIO_3_22 = IOMUX_PAD(0x03BC, 0x00A8, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D22__SPDIF_OUT1 = IOMUX_PAD(0x03BC, 0x00A8, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D22__PL301MX6QPER1_HWRITE = IOMUX_PAD(0x03BC, 0x00A8, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D23__WEIM_WEIM_D_23 = IOMUX_PAD(0x03C0, 0x00AC, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D23__IPU1_DI0_D0_CS = IOMUX_PAD(0x03C0, 0x00AC, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D23__UART3_CTS = IOMUX_PAD(0x03C0, 0x00AC, 2, 0x092C, 0, 0),
- MX6Q_PAD_EIM_D23__UART1_DCD = IOMUX_PAD(0x03C0, 0x00AC, 3, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D23__IPU2_CSI1_DATA_EN = IOMUX_PAD(0x03C0, 0x00AC, 4, 0x08D8, 0, 0),
- MX6Q_PAD_EIM_D23__GPIO_3_23 = IOMUX_PAD(0x03C0, 0x00AC, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D23__IPU1_DI1_PIN2 = IOMUX_PAD(0x03C0, 0x00AC, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D23__IPU1_DI1_PIN14 = IOMUX_PAD(0x03C0, 0x00AC, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_EB3__WEIM_WEIM_EB_3 = IOMUX_PAD(0x03C4, 0x00B0, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_EB3__ECSPI4_RDY = IOMUX_PAD(0x03C4, 0x00B0, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_EB3__UART3_CTS = IOMUX_PAD(0x03C4, 0x00B0, 2, 0x0000, 0, 0),
- MX6Q_PAD_EIM_EB3__UART3_RTS = IOMUX_PAD(0x03C4, 0x00B0, 2, 0x092C, 1, 0),
- MX6Q_PAD_EIM_EB3__UART1_RI = IOMUX_PAD(0x03C4, 0x00B0, 3, 0x0000, 0, 0),
- MX6Q_PAD_EIM_EB3__IPU2_CSI1_HSYNC = IOMUX_PAD(0x03C4, 0x00B0, 4, 0x08DC, 0, 0),
- MX6Q_PAD_EIM_EB3__GPIO_2_31 = IOMUX_PAD(0x03C4, 0x00B0, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_EB3__IPU1_DI1_PIN3 = IOMUX_PAD(0x03C4, 0x00B0, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_EB3__SRC_BT_CFG_31 = IOMUX_PAD(0x03C4, 0x00B0, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D24__WEIM_WEIM_D_24 = IOMUX_PAD(0x03C8, 0x00B4, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D24__ECSPI4_SS2 = IOMUX_PAD(0x03C8, 0x00B4, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D24__UART3_TXD = IOMUX_PAD(0x03C8, 0x00B4, 2, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D24__UART3_TXD_RXD = IOMUX_PAD(0x03C8, 0x00B4, 2, 0x0930, 0, 0),
- MX6Q_PAD_EIM_D24__ECSPI1_SS2 = IOMUX_PAD(0x03C8, 0x00B4, 3, 0x0808, 0, 0),
- MX6Q_PAD_EIM_D24__ECSPI2_SS2 = IOMUX_PAD(0x03C8, 0x00B4, 4, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D24__GPIO_3_24 = IOMUX_PAD(0x03C8, 0x00B4, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D24__AUDMUX_AUD5_RXFS = IOMUX_PAD(0x03C8, 0x00B4, 6, 0x07D8, 0, 0),
- MX6Q_PAD_EIM_D24__UART1_DTR = IOMUX_PAD(0x03C8, 0x00B4, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D25__WEIM_WEIM_D_25 = IOMUX_PAD(0x03CC, 0x00B8, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D25__ECSPI4_SS3 = IOMUX_PAD(0x03CC, 0x00B8, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D25__UART3_RXD = IOMUX_PAD(0x03CC, 0x00B8, 2, 0x0930, 1, 0),
- MX6Q_PAD_EIM_D25__ECSPI1_SS3 = IOMUX_PAD(0x03CC, 0x00B8, 3, 0x080C, 0, 0),
- MX6Q_PAD_EIM_D25__ECSPI2_SS3 = IOMUX_PAD(0x03CC, 0x00B8, 4, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D25__GPIO_3_25 = IOMUX_PAD(0x03CC, 0x00B8, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D25__AUDMUX_AUD5_RXC = IOMUX_PAD(0x03CC, 0x00B8, 6, 0x07D4, 0, 0),
- MX6Q_PAD_EIM_D25__UART1_DSR = IOMUX_PAD(0x03CC, 0x00B8, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D26__WEIM_WEIM_D_26 = IOMUX_PAD(0x03D0, 0x00BC, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D26__IPU1_DI1_PIN11 = IOMUX_PAD(0x03D0, 0x00BC, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D26__IPU1_CSI0_D_1 = IOMUX_PAD(0x03D0, 0x00BC, 2, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D26__IPU2_CSI1_D_14 = IOMUX_PAD(0x03D0, 0x00BC, 3, 0x08C0, 0, 0),
- MX6Q_PAD_EIM_D26__UART2_TXD = IOMUX_PAD(0x03D0, 0x00BC, 4, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D26__UART2_TXD_RXD = IOMUX_PAD(0x03D0, 0x00BC, 4, 0x0928, 0, 0),
- MX6Q_PAD_EIM_D26__GPIO_3_26 = IOMUX_PAD(0x03D0, 0x00BC, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D26__IPU1_SISG_2 = IOMUX_PAD(0x03D0, 0x00BC, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D26__IPU1_DISP1_DAT_22 = IOMUX_PAD(0x03D0, 0x00BC, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D27__WEIM_WEIM_D_27 = IOMUX_PAD(0x03D4, 0x00C0, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D27__IPU1_DI1_PIN13 = IOMUX_PAD(0x03D4, 0x00C0, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D27__IPU1_CSI0_D_0 = IOMUX_PAD(0x03D4, 0x00C0, 2, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D27__IPU2_CSI1_D_13 = IOMUX_PAD(0x03D4, 0x00C0, 3, 0x08BC, 0, 0),
- MX6Q_PAD_EIM_D27__UART2_RXD = IOMUX_PAD(0x03D4, 0x00C0, 4, 0x0928, 1, 0),
- MX6Q_PAD_EIM_D27__GPIO_3_27 = IOMUX_PAD(0x03D4, 0x00C0, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D27__IPU1_SISG_3 = IOMUX_PAD(0x03D4, 0x00C0, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D27__IPU1_DISP1_DAT_23 = IOMUX_PAD(0x03D4, 0x00C0, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D28__WEIM_WEIM_D_28 = IOMUX_PAD(0x03D8, 0x00C4, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D28__I2C1_SDA = IOMUX_PAD(0x03D8, 0x00C4, 17, 0x089C, 0, 0),
- MX6Q_PAD_EIM_D28__ECSPI4_MOSI = IOMUX_PAD(0x03D8, 0x00C4, 2, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D28__IPU2_CSI1_D_12 = IOMUX_PAD(0x03D8, 0x00C4, 3, 0x08B8, 0, 0),
- MX6Q_PAD_EIM_D28__UART2_CTS = IOMUX_PAD(0x03D8, 0x00C4, 4, 0x0924, 0, 0),
- MX6Q_PAD_EIM_D28__GPIO_3_28 = IOMUX_PAD(0x03D8, 0x00C4, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D28__IPU1_EXT_TRIG = IOMUX_PAD(0x03D8, 0x00C4, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D28__IPU1_DI0_PIN13 = IOMUX_PAD(0x03D8, 0x00C4, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D29__WEIM_WEIM_D_29 = IOMUX_PAD(0x03DC, 0x00C8, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D29__IPU1_DI1_PIN15 = IOMUX_PAD(0x03DC, 0x00C8, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D29__ECSPI4_SS0 = IOMUX_PAD(0x03DC, 0x00C8, 2, 0x0824, 1, 0),
- MX6Q_PAD_EIM_D29__UART2_CTS = IOMUX_PAD(0x03DC, 0x00C8, 4, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D29__UART2_RTS = IOMUX_PAD(0x03DC, 0x00C8, 4, 0x0924, 1, 0),
- MX6Q_PAD_EIM_D29__GPIO_3_29 = IOMUX_PAD(0x03DC, 0x00C8, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D29__IPU2_CSI1_VSYNC = IOMUX_PAD(0x03DC, 0x00C8, 6, 0x08E4, 0, 0),
- MX6Q_PAD_EIM_D29__IPU1_DI0_PIN14 = IOMUX_PAD(0x03DC, 0x00C8, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D30__WEIM_WEIM_D_30 = IOMUX_PAD(0x03E0, 0x00CC, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D30__IPU1_DISP1_DAT_21 = IOMUX_PAD(0x03E0, 0x00CC, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D30__IPU1_DI0_PIN11 = IOMUX_PAD(0x03E0, 0x00CC, 2, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D30__IPU1_CSI0_D_3 = IOMUX_PAD(0x03E0, 0x00CC, 3, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D30__UART3_CTS = IOMUX_PAD(0x03E0, 0x00CC, 4, 0x092C, 2, 0),
- MX6Q_PAD_EIM_D30__GPIO_3_30 = IOMUX_PAD(0x03E0, 0x00CC, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D30__USBOH3_USBH1_OC = IOMUX_PAD(0x03E0, 0x00CC, 6, 0x0948, 0, 0),
- MX6Q_PAD_EIM_D30__PL301MX6QPER1_HPROT_0 = IOMUX_PAD(0x03E0, 0x00CC, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D31__WEIM_WEIM_D_31 = IOMUX_PAD(0x03E4, 0x00D0, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D31__IPU1_DISP1_DAT_20 = IOMUX_PAD(0x03E4, 0x00D0, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D31__IPU1_DI0_PIN12 = IOMUX_PAD(0x03E4, 0x00D0, 2, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D31__IPU1_CSI0_D_2 = IOMUX_PAD(0x03E4, 0x00D0, 3, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D31__UART3_CTS = IOMUX_PAD(0x03E4, 0x00D0, 4, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D31__UART3_RTS = IOMUX_PAD(0x03E4, 0x00D0, 4, 0x092C, 3, 0),
- MX6Q_PAD_EIM_D31__GPIO_3_31 = IOMUX_PAD(0x03E4, 0x00D0, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D31__USBOH3_USBH1_PWR = IOMUX_PAD(0x03E4, 0x00D0, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_D31__PL301MX6QPER1_HPROT_1 = IOMUX_PAD(0x03E4, 0x00D0, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A24__WEIM_WEIM_A_24 = IOMUX_PAD(0x03E8, 0x00D4, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A24__IPU1_DISP1_DAT_19 = IOMUX_PAD(0x03E8, 0x00D4, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A24__IPU2_CSI1_D_19 = IOMUX_PAD(0x03E8, 0x00D4, 2, 0x08D4, 1, 0),
- MX6Q_PAD_EIM_A24__IPU2_SISG_2 = IOMUX_PAD(0x03E8, 0x00D4, 3, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A24__IPU1_SISG_2 = IOMUX_PAD(0x03E8, 0x00D4, 4, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A24__GPIO_5_4 = IOMUX_PAD(0x03E8, 0x00D4, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A24__PL301MX6QPER1_HPROT_2 = IOMUX_PAD(0x03E8, 0x00D4, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A24__SRC_BT_CFG_24 = IOMUX_PAD(0x03E8, 0x00D4, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A23__WEIM_WEIM_A_23 = IOMUX_PAD(0x03EC, 0x00D8, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A23__IPU1_DISP1_DAT_18 = IOMUX_PAD(0x03EC, 0x00D8, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A23__IPU2_CSI1_D_18 = IOMUX_PAD(0x03EC, 0x00D8, 2, 0x08D0, 1, 0),
- MX6Q_PAD_EIM_A23__IPU2_SISG_3 = IOMUX_PAD(0x03EC, 0x00D8, 3, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A23__IPU1_SISG_3 = IOMUX_PAD(0x03EC, 0x00D8, 4, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A23__GPIO_6_6 = IOMUX_PAD(0x03EC, 0x00D8, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A23__PL301MX6QPER1_HPROT_3 = IOMUX_PAD(0x03EC, 0x00D8, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A23__SRC_BT_CFG_23 = IOMUX_PAD(0x03EC, 0x00D8, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A22__WEIM_WEIM_A_22 = IOMUX_PAD(0x03F0, 0x00DC, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A22__IPU1_DISP1_DAT_17 = IOMUX_PAD(0x03F0, 0x00DC, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A22__IPU2_CSI1_D_17 = IOMUX_PAD(0x03F0, 0x00DC, 2, 0x08CC, 1, 0),
- MX6Q_PAD_EIM_A22__GPIO_2_16 = IOMUX_PAD(0x03F0, 0x00DC, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A22__TPSMP_HDATA_0 = IOMUX_PAD(0x03F0, 0x00DC, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A22__SRC_BT_CFG_22 = IOMUX_PAD(0x03F0, 0x00DC, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A21__WEIM_WEIM_A_21 = IOMUX_PAD(0x03F4, 0x00E0, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A21__IPU1_DISP1_DAT_16 = IOMUX_PAD(0x03F4, 0x00E0, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A21__IPU2_CSI1_D_16 = IOMUX_PAD(0x03F4, 0x00E0, 2, 0x08C8, 1, 0),
- MX6Q_PAD_EIM_A21__RESERVED_RESERVED = IOMUX_PAD(0x03F4, 0x00E0, 3, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A21__MIPI_CORE_DPHY_OUT_18 = IOMUX_PAD(0x03F4, 0x00E0, 4, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A21__GPIO_2_17 = IOMUX_PAD(0x03F4, 0x00E0, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A21__TPSMP_HDATA_1 = IOMUX_PAD(0x03F4, 0x00E0, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A21__SRC_BT_CFG_21 = IOMUX_PAD(0x03F4, 0x00E0, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A20__WEIM_WEIM_A_20 = IOMUX_PAD(0x03F8, 0x00E4, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A20__IPU1_DISP1_DAT_15 = IOMUX_PAD(0x03F8, 0x00E4, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A20__IPU2_CSI1_D_15 = IOMUX_PAD(0x03F8, 0x00E4, 2, 0x08C4, 1, 0),
- MX6Q_PAD_EIM_A20__RESERVED_RESERVED = IOMUX_PAD(0x03F8, 0x00E4, 3, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A20__MIPI_CORE_DPHY_OUT_19 = IOMUX_PAD(0x03F8, 0x00E4, 4, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A20__GPIO_2_18 = IOMUX_PAD(0x03F8, 0x00E4, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A20__TPSMP_HDATA_2 = IOMUX_PAD(0x03F8, 0x00E4, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A20__SRC_BT_CFG_20 = IOMUX_PAD(0x03F8, 0x00E4, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A19__WEIM_WEIM_A_19 = IOMUX_PAD(0x03FC, 0x00E8, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A19__IPU1_DISP1_DAT_14 = IOMUX_PAD(0x03FC, 0x00E8, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A19__IPU2_CSI1_D_14 = IOMUX_PAD(0x03FC, 0x00E8, 2, 0x08C0, 1, 0),
- MX6Q_PAD_EIM_A19__RESERVED_RESERVED = IOMUX_PAD(0x03FC, 0x00E8, 3, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A19__MIPI_CORE_DPHY_OUT_20 = IOMUX_PAD(0x03FC, 0x00E8, 4, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A19__GPIO_2_19 = IOMUX_PAD(0x03FC, 0x00E8, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A19__TPSMP_HDATA_3 = IOMUX_PAD(0x03FC, 0x00E8, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A19__SRC_BT_CFG_19 = IOMUX_PAD(0x03FC, 0x00E8, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A18__WEIM_WEIM_A_18 = IOMUX_PAD(0x0400, 0x00EC, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A18__IPU1_DISP1_DAT_13 = IOMUX_PAD(0x0400, 0x00EC, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A18__IPU2_CSI1_D_13 = IOMUX_PAD(0x0400, 0x00EC, 2, 0x08BC, 1, 0),
- MX6Q_PAD_EIM_A18__RESERVED_RESERVED = IOMUX_PAD(0x0400, 0x00EC, 3, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A18__MIPI_CORE_DPHY_OUT_21 = IOMUX_PAD(0x0400, 0x00EC, 4, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A18__GPIO_2_20 = IOMUX_PAD(0x0400, 0x00EC, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A18__TPSMP_HDATA_4 = IOMUX_PAD(0x0400, 0x00EC, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A18__SRC_BT_CFG_18 = IOMUX_PAD(0x0400, 0x00EC, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A17__WEIM_WEIM_A_17 = IOMUX_PAD(0x0404, 0x00F0, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A17__IPU1_DISP1_DAT_12 = IOMUX_PAD(0x0404, 0x00F0, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A17__IPU2_CSI1_D_12 = IOMUX_PAD(0x0404, 0x00F0, 2, 0x08B8, 1, 0),
- MX6Q_PAD_EIM_A17__RESERVED_RESERVED = IOMUX_PAD(0x0404, 0x00F0, 3, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A17__MIPI_CORE_DPHY_OUT_22 = IOMUX_PAD(0x0404, 0x00F0, 4, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A17__GPIO_2_21 = IOMUX_PAD(0x0404, 0x00F0, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A17__TPSMP_HDATA_5 = IOMUX_PAD(0x0404, 0x00F0, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A17__SRC_BT_CFG_17 = IOMUX_PAD(0x0404, 0x00F0, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A16__WEIM_WEIM_A_16 = IOMUX_PAD(0x0408, 0x00F4, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A16__IPU1_DI1_DISP_CLK = IOMUX_PAD(0x0408, 0x00F4, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A16__IPU2_CSI1_PIXCLK = IOMUX_PAD(0x0408, 0x00F4, 2, 0x08E0, 1, 0),
- MX6Q_PAD_EIM_A16__MIPI_CORE_DPHY_OUT_23 = IOMUX_PAD(0x0408, 0x00F4, 4, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A16__GPIO_2_22 = IOMUX_PAD(0x0408, 0x00F4, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A16__TPSMP_HDATA_6 = IOMUX_PAD(0x0408, 0x00F4, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_A16__SRC_BT_CFG_16 = IOMUX_PAD(0x0408, 0x00F4, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_CS0__WEIM_WEIM_CS_0 = IOMUX_PAD(0x040C, 0x00F8, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_CS0__IPU1_DI1_PIN5 = IOMUX_PAD(0x040C, 0x00F8, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_CS0__ECSPI2_SCLK = IOMUX_PAD(0x040C, 0x00F8, 2, 0x0810, 0, 0),
- MX6Q_PAD_EIM_CS0__MIPI_CORE_DPHY_OUT_24 = IOMUX_PAD(0x040C, 0x00F8, 4, 0x0000, 0, 0),
- MX6Q_PAD_EIM_CS0__GPIO_2_23 = IOMUX_PAD(0x040C, 0x00F8, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_CS0__TPSMP_HDATA_7 = IOMUX_PAD(0x040C, 0x00F8, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_CS1__WEIM_WEIM_CS_1 = IOMUX_PAD(0x0410, 0x00FC, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_CS1__IPU1_DI1_PIN6 = IOMUX_PAD(0x0410, 0x00FC, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_CS1__ECSPI2_MOSI = IOMUX_PAD(0x0410, 0x00FC, 2, 0x0818, 0, 0),
- MX6Q_PAD_EIM_CS1__MIPI_CORE_DPHY_OUT_25 = IOMUX_PAD(0x0410, 0x00FC, 4, 0x0000, 0, 0),
- MX6Q_PAD_EIM_CS1__GPIO_2_24 = IOMUX_PAD(0x0410, 0x00FC, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_CS1__TPSMP_HDATA_8 = IOMUX_PAD(0x0410, 0x00FC, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_OE__WEIM_WEIM_OE = IOMUX_PAD(0x0414, 0x0100, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_OE__IPU1_DI1_PIN7 = IOMUX_PAD(0x0414, 0x0100, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_OE__ECSPI2_MISO = IOMUX_PAD(0x0414, 0x0100, 2, 0x0814, 0, 0),
- MX6Q_PAD_EIM_OE__MIPI_CORE_DPHY_OUT_26 = IOMUX_PAD(0x0414, 0x0100, 4, 0x0000, 0, 0),
- MX6Q_PAD_EIM_OE__GPIO_2_25 = IOMUX_PAD(0x0414, 0x0100, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_OE__TPSMP_HDATA_9 = IOMUX_PAD(0x0414, 0x0100, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_RW__WEIM_WEIM_RW = IOMUX_PAD(0x0418, 0x0104, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_RW__IPU1_DI1_PIN8 = IOMUX_PAD(0x0418, 0x0104, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_RW__ECSPI2_SS0 = IOMUX_PAD(0x0418, 0x0104, 2, 0x081C, 0, 0),
- MX6Q_PAD_EIM_RW__MIPI_CORE_DPHY_OUT_27 = IOMUX_PAD(0x0418, 0x0104, 4, 0x0000, 0, 0),
- MX6Q_PAD_EIM_RW__GPIO_2_26 = IOMUX_PAD(0x0418, 0x0104, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_RW__TPSMP_HDATA_10 = IOMUX_PAD(0x0418, 0x0104, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_RW__SRC_BT_CFG_29 = IOMUX_PAD(0x0418, 0x0104, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_LBA__WEIM_WEIM_LBA = IOMUX_PAD(0x041C, 0x0108, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_LBA__IPU1_DI1_PIN17 = IOMUX_PAD(0x041C, 0x0108, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_LBA__ECSPI2_SS1 = IOMUX_PAD(0x041C, 0x0108, 2, 0x0820, 0, 0),
- MX6Q_PAD_EIM_LBA__GPIO_2_27 = IOMUX_PAD(0x041C, 0x0108, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_LBA__TPSMP_HDATA_11 = IOMUX_PAD(0x041C, 0x0108, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_LBA__SRC_BT_CFG_26 = IOMUX_PAD(0x041C, 0x0108, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_EB0__WEIM_WEIM_EB_0 = IOMUX_PAD(0x0420, 0x010C, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_EB0__IPU1_DISP1_DAT_11 = IOMUX_PAD(0x0420, 0x010C, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_EB0__IPU2_CSI1_D_11 = IOMUX_PAD(0x0420, 0x010C, 2, 0x08B4, 1, 0),
- MX6Q_PAD_EIM_EB0__MIPI_CORE_DPHY_OUT_0 = IOMUX_PAD(0x0420, 0x010C, 3, 0x0000, 0, 0),
- MX6Q_PAD_EIM_EB0__CCM_PMIC_RDY = IOMUX_PAD(0x0420, 0x010C, 4, 0x07F0, 0, 0),
- MX6Q_PAD_EIM_EB0__GPIO_2_28 = IOMUX_PAD(0x0420, 0x010C, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_EB0__TPSMP_HDATA_12 = IOMUX_PAD(0x0420, 0x010C, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_EB0__SRC_BT_CFG_27 = IOMUX_PAD(0x0420, 0x010C, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_EB1__WEIM_WEIM_EB_1 = IOMUX_PAD(0x0424, 0x0110, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_EB1__IPU1_DISP1_DAT_10 = IOMUX_PAD(0x0424, 0x0110, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_EB1__IPU2_CSI1_D_10 = IOMUX_PAD(0x0424, 0x0110, 2, 0x08B0, 1, 0),
- MX6Q_PAD_EIM_EB1__MIPI_CORE_DPHY__OUT_1 = IOMUX_PAD(0x0424, 0x0110, 3, 0x0000, 0, 0),
- MX6Q_PAD_EIM_EB1__GPIO_2_29 = IOMUX_PAD(0x0424, 0x0110, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_EB1__TPSMP_HDATA_13 = IOMUX_PAD(0x0424, 0x0110, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_EB1__SRC_BT_CFG_28 = IOMUX_PAD(0x0424, 0x0110, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA0__WEIM_WEIM_DA_A_0 = IOMUX_PAD(0x0428, 0x0114, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA0__IPU1_DISP1_DAT_9 = IOMUX_PAD(0x0428, 0x0114, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA0__IPU2_CSI1_D_9 = IOMUX_PAD(0x0428, 0x0114, 2, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA0__MIPI_CORE_DPHY__OUT_2 = IOMUX_PAD(0x0428, 0x0114, 3, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA0__GPIO_3_0 = IOMUX_PAD(0x0428, 0x0114, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA0__TPSMP_HDATA_14 = IOMUX_PAD(0x0428, 0x0114, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA0__SRC_BT_CFG_0 = IOMUX_PAD(0x0428, 0x0114, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA1__WEIM_WEIM_DA_A_1 = IOMUX_PAD(0x042C, 0x0118, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA1__IPU1_DISP1_DAT_8 = IOMUX_PAD(0x042C, 0x0118, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA1__IPU2_CSI1_D_8 = IOMUX_PAD(0x042C, 0x0118, 2, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA1__MIPI_CORE_DPHY_OUT_3 = IOMUX_PAD(0x042C, 0x0118, 3, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA1__USBPHY1_TX_LS_MODE = IOMUX_PAD(0x042C, 0x0118, 4, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA1__GPIO_3_1 = IOMUX_PAD(0x042C, 0x0118, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA1__TPSMP_HDATA_15 = IOMUX_PAD(0x042C, 0x0118, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA1__SRC_BT_CFG_1 = IOMUX_PAD(0x042C, 0x0118, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA2__WEIM_WEIM_DA_A_2 = IOMUX_PAD(0x0430, 0x011C, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA2__IPU1_DISP1_DAT_7 = IOMUX_PAD(0x0430, 0x011C, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA2__IPU2_CSI1_D_7 = IOMUX_PAD(0x0430, 0x011C, 2, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA2__MIPI_CORE_DPHY_OUT_4 = IOMUX_PAD(0x0430, 0x011C, 3, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA2__USBPHY1_TX_HS_MODE = IOMUX_PAD(0x0430, 0x011C, 4, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA2__GPIO_3_2 = IOMUX_PAD(0x0430, 0x011C, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA2__TPSMP_HDATA_16 = IOMUX_PAD(0x0430, 0x011C, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA2__SRC_BT_CFG_2 = IOMUX_PAD(0x0430, 0x011C, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA3__WEIM_WEIM_DA_A_3 = IOMUX_PAD(0x0434, 0x0120, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA3__IPU1_DISP1_DAT_6 = IOMUX_PAD(0x0434, 0x0120, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA3__IPU2_CSI1_D_6 = IOMUX_PAD(0x0434, 0x0120, 2, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA3__MIPI_CORE_DPHY_OUT_5 = IOMUX_PAD(0x0434, 0x0120, 3, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA3__USBPHY1_TX_HIZ = IOMUX_PAD(0x0434, 0x0120, 4, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA3__GPIO_3_3 = IOMUX_PAD(0x0434, 0x0120, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA3__TPSMP_HDATA_17 = IOMUX_PAD(0x0434, 0x0120, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA3__SRC_BT_CFG_3 = IOMUX_PAD(0x0434, 0x0120, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA4__WEIM_WEIM_DA_A_4 = IOMUX_PAD(0x0438, 0x0124, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA4__IPU1_DISP1_DAT_5 = IOMUX_PAD(0x0438, 0x0124, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA4__IPU2_CSI1_D_5 = IOMUX_PAD(0x0438, 0x0124, 2, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA4__MIPI_CORE_DPHY_OUT_6 = IOMUX_PAD(0x0438, 0x0124, 3, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA4__ANATOP_USBPHY1_TX_EN = IOMUX_PAD(0x0438, 0x0124, 4, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA4__GPIO_3_4 = IOMUX_PAD(0x0438, 0x0124, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA4__TPSMP_HDATA_18 = IOMUX_PAD(0x0438, 0x0124, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA4__SRC_BT_CFG_4 = IOMUX_PAD(0x0438, 0x0124, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA5__WEIM_WEIM_DA_A_5 = IOMUX_PAD(0x043C, 0x0128, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA5__IPU1_DISP1_DAT_4 = IOMUX_PAD(0x043C, 0x0128, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA5__IPU2_CSI1_D_4 = IOMUX_PAD(0x043C, 0x0128, 2, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA5__MIPI_CORE_DPHY_OUT_7 = IOMUX_PAD(0x043C, 0x0128, 3, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA5__ANATOP_USBPHY1_TX_DP = IOMUX_PAD(0x043C, 0x0128, 4, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA5__GPIO_3_5 = IOMUX_PAD(0x043C, 0x0128, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA5__TPSMP_HDATA_19 = IOMUX_PAD(0x043C, 0x0128, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA5__SRC_BT_CFG_5 = IOMUX_PAD(0x043C, 0x0128, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA6__WEIM_WEIM_DA_A_6 = IOMUX_PAD(0x0440, 0x012C, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA6__IPU1_DISP1_DAT_3 = IOMUX_PAD(0x0440, 0x012C, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA6__IPU2_CSI1_D_3 = IOMUX_PAD(0x0440, 0x012C, 2, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA6__MIPI_CORE_DPHY_OUT_8 = IOMUX_PAD(0x0440, 0x012C, 3, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA6__ANATOP_USBPHY1_TX_DN = IOMUX_PAD(0x0440, 0x012C, 4, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA6__GPIO_3_6 = IOMUX_PAD(0x0440, 0x012C, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA6__TPSMP_HDATA_20 = IOMUX_PAD(0x0440, 0x012C, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA6__SRC_BT_CFG_6 = IOMUX_PAD(0x0440, 0x012C, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA7__WEIM_WEIM_DA_A_7 = IOMUX_PAD(0x0444, 0x0130, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA7__IPU1_DISP1_DAT_2 = IOMUX_PAD(0x0444, 0x0130, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA7__IPU2_CSI1_D_2 = IOMUX_PAD(0x0444, 0x0130, 2, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA7__MIPI_CORE_DPHY_OUT_9 = IOMUX_PAD(0x0444, 0x0130, 3, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA7__GPIO_3_7 = IOMUX_PAD(0x0444, 0x0130, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA7__TPSMP_HDATA_21 = IOMUX_PAD(0x0444, 0x0130, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA7__SRC_BT_CFG_7 = IOMUX_PAD(0x0444, 0x0130, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA8__WEIM_WEIM_DA_A_8 = IOMUX_PAD(0x0448, 0x0134, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA8__IPU1_DISP1_DAT_1 = IOMUX_PAD(0x0448, 0x0134, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA8__IPU2_CSI1_D_1 = IOMUX_PAD(0x0448, 0x0134, 2, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA8__MIPI_CORE_DPHY_OUT_10 = IOMUX_PAD(0x0448, 0x0134, 3, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA8__GPIO_3_8 = IOMUX_PAD(0x0448, 0x0134, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA8__TPSMP_HDATA_22 = IOMUX_PAD(0x0448, 0x0134, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA8__SRC_BT_CFG_8 = IOMUX_PAD(0x0448, 0x0134, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA9__WEIM_WEIM_DA_A_9 = IOMUX_PAD(0x044C, 0x0138, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA9__IPU1_DISP1_DAT_0 = IOMUX_PAD(0x044C, 0x0138, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA9__IPU2_CSI1_D_0 = IOMUX_PAD(0x044C, 0x0138, 2, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA9__MIPI_CORE_DPHY_OUT_11 = IOMUX_PAD(0x044C, 0x0138, 3, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA9__GPIO_3_9 = IOMUX_PAD(0x044C, 0x0138, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA9__TPSMP_HDATA_23 = IOMUX_PAD(0x044C, 0x0138, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA9__SRC_BT_CFG_9 = IOMUX_PAD(0x044C, 0x0138, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA10__WEIM_WEIM_DA_A_10 = IOMUX_PAD(0x0450, 0x013C, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA10__IPU1_DI1_PIN15 = IOMUX_PAD(0x0450, 0x013C, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA10__IPU2_CSI1_DATA_EN = IOMUX_PAD(0x0450, 0x013C, 2, 0x08D8, 1, 0),
- MX6Q_PAD_EIM_DA10__MIPI_CORE_DPHY_OUT12 = IOMUX_PAD(0x0450, 0x013C, 3, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA10__GPIO_3_10 = IOMUX_PAD(0x0450, 0x013C, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA10__TPSMP_HDATA_24 = IOMUX_PAD(0x0450, 0x013C, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA10__SRC_BT_CFG_10 = IOMUX_PAD(0x0450, 0x013C, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA11__WEIM_WEIM_DA_A_11 = IOMUX_PAD(0x0454, 0x0140, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA11__IPU1_DI1_PIN2 = IOMUX_PAD(0x0454, 0x0140, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA11__IPU2_CSI1_HSYNC = IOMUX_PAD(0x0454, 0x0140, 2, 0x08DC, 1, 0),
- MX6Q_PAD_EIM_DA11__MIPI_CORE_DPHY_OUT13 = IOMUX_PAD(0x0454, 0x0140, 3, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA11__SDMA_DBG_EVT_CHN_6 = IOMUX_PAD(0x0454, 0x0140, 4, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA11__GPIO_3_11 = IOMUX_PAD(0x0454, 0x0140, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA11__TPSMP_HDATA_25 = IOMUX_PAD(0x0454, 0x0140, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA11__SRC_BT_CFG_11 = IOMUX_PAD(0x0454, 0x0140, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA12__WEIM_WEIM_DA_A_12 = IOMUX_PAD(0x0458, 0x0144, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA12__IPU1_DI1_PIN3 = IOMUX_PAD(0x0458, 0x0144, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA12__IPU2_CSI1_VSYNC = IOMUX_PAD(0x0458, 0x0144, 2, 0x08E4, 1, 0),
- MX6Q_PAD_EIM_DA12__MIPI_CORE_DPHY_OUT14 = IOMUX_PAD(0x0458, 0x0144, 3, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA12__SDMA_DEBUG_EVT_CHN_3 = IOMUX_PAD(0x0458, 0x0144, 4, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA12__GPIO_3_12 = IOMUX_PAD(0x0458, 0x0144, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA12__TPSMP_HDATA_26 = IOMUX_PAD(0x0458, 0x0144, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA12__SRC_BT_CFG_12 = IOMUX_PAD(0x0458, 0x0144, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA13__WEIM_WEIM_DA_A_13 = IOMUX_PAD(0x045C, 0x0148, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA13__IPU1_DI1_D0_CS = IOMUX_PAD(0x045C, 0x0148, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA13__CCM_DI1_EXT_CLK = IOMUX_PAD(0x045C, 0x0148, 2, 0x07EC, 1, 0),
- MX6Q_PAD_EIM_DA13__MIPI_CORE_DPHY_OUT15 = IOMUX_PAD(0x045C, 0x0148, 3, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA13__SDMA_DEBUG_EVT_CHN_4 = IOMUX_PAD(0x045C, 0x0148, 4, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA13__GPIO_3_13 = IOMUX_PAD(0x045C, 0x0148, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA13__TPSMP_HDATA_27 = IOMUX_PAD(0x045C, 0x0148, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA13__SRC_BT_CFG_13 = IOMUX_PAD(0x045C, 0x0148, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA14__WEIM_WEIM_DA_A_14 = IOMUX_PAD(0x0460, 0x014C, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA14__IPU1_DI1_D1_CS = IOMUX_PAD(0x0460, 0x014C, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA14__CCM_DI0_EXT_CLK = IOMUX_PAD(0x0460, 0x014C, 2, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA14__MIPI_CORE_DPHY_OUT16 = IOMUX_PAD(0x0460, 0x014C, 3, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA14__SDMA_DEBUG_EVT_CHN_5 = IOMUX_PAD(0x0460, 0x014C, 4, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA14__GPIO_3_14 = IOMUX_PAD(0x0460, 0x014C, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA14__TPSMP_HDATA_28 = IOMUX_PAD(0x0460, 0x014C, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA14__SRC_BT_CFG_14 = IOMUX_PAD(0x0460, 0x014C, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA15__WEIM_WEIM_DA_A_15 = IOMUX_PAD(0x0464, 0x0150, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA15__IPU1_DI1_PIN1 = IOMUX_PAD(0x0464, 0x0150, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA15__IPU1_DI1_PIN4 = IOMUX_PAD(0x0464, 0x0150, 2, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA15__MIPI_CORE_DPHY_OUT17 = IOMUX_PAD(0x0464, 0x0150, 3, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA15__GPIO_3_15 = IOMUX_PAD(0x0464, 0x0150, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA15__TPSMP_HDATA_29 = IOMUX_PAD(0x0464, 0x0150, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_DA15__SRC_BT_CFG_15 = IOMUX_PAD(0x0464, 0x0150, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_WAIT__WEIM_WEIM_WAIT = IOMUX_PAD(0x0468, 0x0154, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_WAIT__WEIM_WEIM_DTACK_B = IOMUX_PAD(0x0468, 0x0154, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_WAIT__GPIO_5_0 = IOMUX_PAD(0x0468, 0x0154, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_WAIT__TPSMP_HDATA_30 = IOMUX_PAD(0x0468, 0x0154, 6, 0x0000, 0, 0),
- MX6Q_PAD_EIM_WAIT__SRC_BT_CFG_25 = IOMUX_PAD(0x0468, 0x0154, 7, 0x0000, 0, 0),
- MX6Q_PAD_EIM_BCLK__WEIM_WEIM_BCLK = IOMUX_PAD(0x046C, 0x0158, 0, 0x0000, 0, 0),
- MX6Q_PAD_EIM_BCLK__IPU1_DI1_PIN16 = IOMUX_PAD(0x046C, 0x0158, 1, 0x0000, 0, 0),
- MX6Q_PAD_EIM_BCLK__GPIO_6_31 = IOMUX_PAD(0x046C, 0x0158, 5, 0x0000, 0, 0),
- MX6Q_PAD_EIM_BCLK__TPSMP_HDATA_31 = IOMUX_PAD(0x046C, 0x0158, 6, 0x0000, 0, 0),
- MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6Q_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 1, 0x0000, 0, 0),
- MX6Q_PAD_DI0_DISP_CLK__MIPI_CR_DPY_OT28 = IOMUX_PAD(0x0470, 0x015C, 3, 0x0000, 0, 0),
- MX6Q_PAD_DI0_DISP_CLK__SDMA_DBG_CR_STA0 = IOMUX_PAD(0x0470, 0x015C, 4, 0x0000, 0, 0),
- MX6Q_PAD_DI0_DISP_CLK__GPIO_4_16 = IOMUX_PAD(0x0470, 0x015C, 5, 0x0000, 0, 0),
- MX6Q_PAD_DI0_DISP_CLK__MMDC_DEBUG_0 = IOMUX_PAD(0x0470, 0x015C, 6, 0x0000, 0, 0),
- MX6Q_PAD_DI0_PIN15__IPU1_DI0_PIN15 = IOMUX_PAD(0x0474, 0x0160, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6Q_PAD_DI0_PIN15__IPU2_DI0_PIN15 = IOMUX_PAD(0x0474, 0x0160, 1, 0x0000, 0, 0),
- MX6Q_PAD_DI0_PIN15__AUDMUX_AUD6_TXC = IOMUX_PAD(0x0474, 0x0160, 2, 0x0000, 0, 0),
- MX6Q_PAD_DI0_PIN15__MIPI_CR_DPHY_OUT_29 = IOMUX_PAD(0x0474, 0x0160, 3, 0x0000, 0, 0),
- MX6Q_PAD_DI0_PIN15__SDMA_DBG_CORE_STA_1 = IOMUX_PAD(0x0474, 0x0160, 4, 0x0000, 0, 0),
- MX6Q_PAD_DI0_PIN15__GPIO_4_17 = IOMUX_PAD(0x0474, 0x0160, 5, 0x0000, 0, 0),
- MX6Q_PAD_DI0_PIN15__MMDC_MMDC_DEBUG_1 = IOMUX_PAD(0x0474, 0x0160, 6, 0x0000, 0, 0),
- MX6Q_PAD_DI0_PIN2__IPU1_DI0_PIN2 = IOMUX_PAD(0x0478, 0x0164, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6Q_PAD_DI0_PIN2__IPU2_DI0_PIN2 = IOMUX_PAD(0x0478, 0x0164, 1, 0x0000, 0, 0),
- MX6Q_PAD_DI0_PIN2__AUDMUX_AUD6_TXD = IOMUX_PAD(0x0478, 0x0164, 2, 0x0000, 0, 0),
- MX6Q_PAD_DI0_PIN2__MIPI_CR_DPHY_OUT_30 = IOMUX_PAD(0x0478, 0x0164, 3, 0x0000, 0, 0),
- MX6Q_PAD_DI0_PIN2__SDMA_DBG_CORE_STA_2 = IOMUX_PAD(0x0478, 0x0164, 4, 0x0000, 0, 0),
- MX6Q_PAD_DI0_PIN2__GPIO_4_18 = IOMUX_PAD(0x0478, 0x0164, 5, 0x0000, 0, 0),
- MX6Q_PAD_DI0_PIN2__MMDC_DEBUG_2 = IOMUX_PAD(0x0478, 0x0164, 6, 0x0000, 0, 0),
- MX6Q_PAD_DI0_PIN2__PL301_PER1_HADDR_9 = IOMUX_PAD(0x0478, 0x0164, 7, 0x0000, 0, 0),
- MX6Q_PAD_DI0_PIN3__IPU1_DI0_PIN3 = IOMUX_PAD(0x047C, 0x0168, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6Q_PAD_DI0_PIN3__IPU2_DI0_PIN3 = IOMUX_PAD(0x047C, 0x0168, 1, 0x0000, 0, 0),
- MX6Q_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS = IOMUX_PAD(0x047C, 0x0168, 2, 0x0000, 0, 0),
- MX6Q_PAD_DI0_PIN3__MIPI_CORE_DPHY_OUT31 = IOMUX_PAD(0x047C, 0x0168, 3, 0x0000, 0, 0),
- MX6Q_PAD_DI0_PIN3__SDMA_DBG_CORE_STA_3 = IOMUX_PAD(0x047C, 0x0168, 4, 0x0000, 0, 0),
- MX6Q_PAD_DI0_PIN3__GPIO_4_19 = IOMUX_PAD(0x047C, 0x0168, 5, 0x0000, 0, 0),
- MX6Q_PAD_DI0_PIN3__MMDC_MMDC_DEBUG_3 = IOMUX_PAD(0x047C, 0x0168, 6, 0x0000, 0, 0),
- MX6Q_PAD_DI0_PIN3__PL301_PER1_HADDR_10 = IOMUX_PAD(0x047C, 0x0168, 7, 0x0000, 0, 0),
- MX6Q_PAD_DI0_PIN4__IPU1_DI0_PIN4 = IOMUX_PAD(0x0480, 0x016C, 0, 0x0000, 0, 0),
- MX6Q_PAD_DI0_PIN4__IPU2_DI0_PIN4 = IOMUX_PAD(0x0480, 0x016C, 1, 0x0000, 0, 0),
- MX6Q_PAD_DI0_PIN4__AUDMUX_AUD6_RXD = IOMUX_PAD(0x0480, 0x016C, 2, 0x0000, 0, 0),
- MX6Q_PAD_DI0_PIN4__USDHC1_WP = IOMUX_PAD(0x0480, 0x016C, 3, 0x094C, 0, 0),
- MX6Q_PAD_DI0_PIN4__SDMA_DEBUG_YIELD = IOMUX_PAD(0x0480, 0x016C, 4, 0x0000, 0, 0),
- MX6Q_PAD_DI0_PIN4__GPIO_4_20 = IOMUX_PAD(0x0480, 0x016C, 5, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6Q_PAD_DI0_PIN4__MMDC_MMDC_DEBUG_4 = IOMUX_PAD(0x0480, 0x016C, 6, 0x0000, 0, 0),
- MX6Q_PAD_DI0_PIN4__PL301_PER1_HADDR_11 = IOMUX_PAD(0x0480, 0x016C, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0 = IOMUX_PAD(0x0484, 0x0170, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6Q_PAD_DISP0_DAT0__IPU2_DISP0_DAT_0 = IOMUX_PAD(0x0484, 0x0170, 1, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT0__ECSPI3_SCLK = IOMUX_PAD(0x0484, 0x0170, 2, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT0__USDHC1_USDHC_DBG_0 = IOMUX_PAD(0x0484, 0x0170, 3, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT0__SDMA_DBG_CORE_RUN = IOMUX_PAD(0x0484, 0x0170, 4, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT0__GPIO_4_21 = IOMUX_PAD(0x0484, 0x0170, 5, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT0__MMDC_MMDC_DEBUG_5 = IOMUX_PAD(0x0484, 0x0170, 6, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1 = IOMUX_PAD(0x0488, 0x0174, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6Q_PAD_DISP0_DAT1__IPU2_DISP0_DAT_1 = IOMUX_PAD(0x0488, 0x0174, 1, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT1__ECSPI3_MOSI = IOMUX_PAD(0x0488, 0x0174, 2, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT1__USDHC1_USDHC_DBG_1 = IOMUX_PAD(0x0488, 0x0174, 3, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT1__SDMA_DBG_EVT_CHNSL = IOMUX_PAD(0x0488, 0x0174, 4, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT1__GPIO_4_22 = IOMUX_PAD(0x0488, 0x0174, 5, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT1__MMDC_DEBUG_6 = IOMUX_PAD(0x0488, 0x0174, 6, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT1__PL301_PER1_HADR_12 = IOMUX_PAD(0x0488, 0x0174, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2 = IOMUX_PAD(0x048C, 0x0178, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6Q_PAD_DISP0_DAT2__IPU2_DISP0_DAT_2 = IOMUX_PAD(0x048C, 0x0178, 1, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT2__ECSPI3_MISO = IOMUX_PAD(0x048C, 0x0178, 2, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT2__USDHC1_USDHC_DBG_2 = IOMUX_PAD(0x048C, 0x0178, 3, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT2__SDMA_DEBUG_MODE = IOMUX_PAD(0x048C, 0x0178, 4, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT2__GPIO_4_23 = IOMUX_PAD(0x048C, 0x0178, 5, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT2__MMDC_DEBUG_7 = IOMUX_PAD(0x048C, 0x0178, 6, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT2__PL301_PER1_HADR_13 = IOMUX_PAD(0x048C, 0x0178, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3 = IOMUX_PAD(0x0490, 0x017C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6Q_PAD_DISP0_DAT3__IPU2_DISP0_DAT_3 = IOMUX_PAD(0x0490, 0x017C, 1, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT3__ECSPI3_SS0 = IOMUX_PAD(0x0490, 0x017C, 2, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT3__USDHC1_USDHC_DBG_3 = IOMUX_PAD(0x0490, 0x017C, 3, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT3__SDMA_DBG_BUS_ERROR = IOMUX_PAD(0x0490, 0x017C, 4, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT3__GPIO_4_24 = IOMUX_PAD(0x0490, 0x017C, 5, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT3__MMDC_MMDC_DBG_8 = IOMUX_PAD(0x0490, 0x017C, 6, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT3__PL301_PER1_HADR_14 = IOMUX_PAD(0x0490, 0x017C, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4 = IOMUX_PAD(0x0494, 0x0180, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6Q_PAD_DISP0_DAT4__IPU2_DISP0_DAT_4 = IOMUX_PAD(0x0494, 0x0180, 1, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT4__ECSPI3_SS1 = IOMUX_PAD(0x0494, 0x0180, 2, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT4__USDHC1_USDHC_DBG_4 = IOMUX_PAD(0x0494, 0x0180, 3, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB = IOMUX_PAD(0x0494, 0x0180, 4, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT4__GPIO_4_25 = IOMUX_PAD(0x0494, 0x0180, 5, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT4__MMDC_MMDC_DEBUG_9 = IOMUX_PAD(0x0494, 0x0180, 6, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT4__PL301_PER1_HADR_15 = IOMUX_PAD(0x0494, 0x0180, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5 = IOMUX_PAD(0x0498, 0x0184, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6Q_PAD_DISP0_DAT5__IPU2_DISP0_DAT_5 = IOMUX_PAD(0x0498, 0x0184, 1, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT5__ECSPI3_SS2 = IOMUX_PAD(0x0498, 0x0184, 2, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT5__AUDMUX_AUD6_RXFS = IOMUX_PAD(0x0498, 0x0184, 3, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT5__SDMA_DBG_MCH_DMBUS = IOMUX_PAD(0x0498, 0x0184, 4, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT5__GPIO_4_26 = IOMUX_PAD(0x0498, 0x0184, 5, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT5__MMDC_DEBUG_10 = IOMUX_PAD(0x0498, 0x0184, 6, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT5__PL301_PER1_HADR_16 = IOMUX_PAD(0x0498, 0x0184, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6 = IOMUX_PAD(0x049C, 0x0188, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6Q_PAD_DISP0_DAT6__IPU2_DISP0_DAT_6 = IOMUX_PAD(0x049C, 0x0188, 1, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT6__ECSPI3_SS3 = IOMUX_PAD(0x049C, 0x0188, 2, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT6__AUDMUX_AUD6_RXC = IOMUX_PAD(0x049C, 0x0188, 3, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT6__SDMA_DBG_RTBUF_WRT = IOMUX_PAD(0x049C, 0x0188, 4, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT6__GPIO_4_27 = IOMUX_PAD(0x049C, 0x0188, 5, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT6__MMDC_DEBUG_11 = IOMUX_PAD(0x049C, 0x0188, 6, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT6__PL301_PER1_HADR_17 = IOMUX_PAD(0x049C, 0x0188, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7 = IOMUX_PAD(0x04A0, 0x018C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6Q_PAD_DISP0_DAT7__IPU2_DISP0_DAT_7 = IOMUX_PAD(0x04A0, 0x018C, 1, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT7__ECSPI3_RDY = IOMUX_PAD(0x04A0, 0x018C, 2, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT7__USDHC1_USDHC_DBG_5 = IOMUX_PAD(0x04A0, 0x018C, 3, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT7__SDMA_DBG_EVT_CHN_0 = IOMUX_PAD(0x04A0, 0x018C, 4, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT7__GPIO_4_28 = IOMUX_PAD(0x04A0, 0x018C, 5, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT7__MMDC_DEBUG_12 = IOMUX_PAD(0x04A0, 0x018C, 6, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT7__PL301_PER1_HADR_18 = IOMUX_PAD(0x04A0, 0x018C, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8 = IOMUX_PAD(0x04A4, 0x0190, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6Q_PAD_DISP0_DAT8__IPU2_DISP0_DAT_8 = IOMUX_PAD(0x04A4, 0x0190, 1, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT8__PWM1_PWMO = IOMUX_PAD(0x04A4, 0x0190, 2, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT8__WDOG1_WDOG_B = IOMUX_PAD(0x04A4, 0x0190, 3, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT8__SDMA_DBG_EVT_CHN_1 = IOMUX_PAD(0x04A4, 0x0190, 4, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT8__GPIO_4_29 = IOMUX_PAD(0x04A4, 0x0190, 5, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT8__MMDC_DEBUG_13 = IOMUX_PAD(0x04A4, 0x0190, 6, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT8__PL301_PER1_HADR_19 = IOMUX_PAD(0x04A4, 0x0190, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9 = IOMUX_PAD(0x04A8, 0x0194, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6Q_PAD_DISP0_DAT9__IPU2_DISP0_DAT_9 = IOMUX_PAD(0x04A8, 0x0194, 1, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT9__PWM2_PWMO = IOMUX_PAD(0x04A8, 0x0194, 2, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT9__WDOG2_WDOG_B = IOMUX_PAD(0x04A8, 0x0194, 3, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT9__SDMA_DBG_EVT_CHN_2 = IOMUX_PAD(0x04A8, 0x0194, 4, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT9__GPIO_4_30 = IOMUX_PAD(0x04A8, 0x0194, 5, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT9__MMDC_DEBUG_14 = IOMUX_PAD(0x04A8, 0x0194, 6, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT9__PL301_PER1_HADR_20 = IOMUX_PAD(0x04A8, 0x0194, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10 = IOMUX_PAD(0x04AC, 0x0198, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6Q_PAD_DISP0_DAT10__IPU2_DISP0_DAT_10 = IOMUX_PAD(0x04AC, 0x0198, 1, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT10__USDHC1_DBG_6 = IOMUX_PAD(0x04AC, 0x0198, 3, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT10__SDMA_DBG_EVT_CHN3 = IOMUX_PAD(0x04AC, 0x0198, 4, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT10__GPIO_4_31 = IOMUX_PAD(0x04AC, 0x0198, 5, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT10__MMDC_DEBUG_15 = IOMUX_PAD(0x04AC, 0x0198, 6, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT10__PL301_PER1_HADR21 = IOMUX_PAD(0x04AC, 0x0198, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11 = IOMUX_PAD(0x04B0, 0x019C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6Q_PAD_DISP0_DAT11__IPU2_DISP0_DAT_11 = IOMUX_PAD(0x04B0, 0x019C, 1, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT11__USDHC1_USDHC_DBG7 = IOMUX_PAD(0x04B0, 0x019C, 3, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT11__SDMA_DBG_EVT_CHN4 = IOMUX_PAD(0x04B0, 0x019C, 4, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT11__GPIO_5_5 = IOMUX_PAD(0x04B0, 0x019C, 5, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT11__MMDC_DEBUG_16 = IOMUX_PAD(0x04B0, 0x019C, 6, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT11__PL301_PER1_HADR22 = IOMUX_PAD(0x04B0, 0x019C, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12 = IOMUX_PAD(0x04B4, 0x01A0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6Q_PAD_DISP0_DAT12__IPU2_DISP0_DAT_12 = IOMUX_PAD(0x04B4, 0x01A0, 1, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT12__RESERVED_RESERVED = IOMUX_PAD(0x04B4, 0x01A0, 3, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT12__SDMA_DBG_EVT_CHN5 = IOMUX_PAD(0x04B4, 0x01A0, 4, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT12__GPIO_5_6 = IOMUX_PAD(0x04B4, 0x01A0, 5, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT12__MMDC_DEBUG_17 = IOMUX_PAD(0x04B4, 0x01A0, 6, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT12__PL301_PER1_HADR23 = IOMUX_PAD(0x04B4, 0x01A0, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13 = IOMUX_PAD(0x04B8, 0x01A4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6Q_PAD_DISP0_DAT13__IPU2_DISP0_DAT_13 = IOMUX_PAD(0x04B8, 0x01A4, 1, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS = IOMUX_PAD(0x04B8, 0x01A4, 3, 0x07D8, 1, 0),
- MX6Q_PAD_DISP0_DAT13__SDMA_DBG_EVT_CHN0 = IOMUX_PAD(0x04B8, 0x01A4, 4, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT13__GPIO_5_7 = IOMUX_PAD(0x04B8, 0x01A4, 5, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT13__MMDC_DEBUG_18 = IOMUX_PAD(0x04B8, 0x01A4, 6, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT13__PL301_PER1_HADR24 = IOMUX_PAD(0x04B8, 0x01A4, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14 = IOMUX_PAD(0x04BC, 0x01A8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6Q_PAD_DISP0_DAT14__IPU2_DISP0_DAT_14 = IOMUX_PAD(0x04BC, 0x01A8, 1, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC = IOMUX_PAD(0x04BC, 0x01A8, 3, 0x07D4, 1, 0),
- MX6Q_PAD_DISP0_DAT14__SDMA_DBG_EVT_CHN1 = IOMUX_PAD(0x04BC, 0x01A8, 4, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT14__GPIO_5_8 = IOMUX_PAD(0x04BC, 0x01A8, 5, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT14__MMDC_DEBUG_19 = IOMUX_PAD(0x04BC, 0x01A8, 6, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15 = IOMUX_PAD(0x04C0, 0x01AC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6Q_PAD_DISP0_DAT15__IPU2_DISP0_DAT_15 = IOMUX_PAD(0x04C0, 0x01AC, 1, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT15__ECSPI1_SS1 = IOMUX_PAD(0x04C0, 0x01AC, 2, 0x0804, 1, 0),
- MX6Q_PAD_DISP0_DAT15__ECSPI2_SS1 = IOMUX_PAD(0x04C0, 0x01AC, 3, 0x0820, 1, 0),
- MX6Q_PAD_DISP0_DAT15__SDMA_DBG_EVT_CHN2 = IOMUX_PAD(0x04C0, 0x01AC, 4, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT15__GPIO_5_9 = IOMUX_PAD(0x04C0, 0x01AC, 5, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT15__MMDC_DEBUG_20 = IOMUX_PAD(0x04C0, 0x01AC, 6, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT15__PL301_PER1_HADR25 = IOMUX_PAD(0x04C0, 0x01AC, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16 = IOMUX_PAD(0x04C4, 0x01B0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6Q_PAD_DISP0_DAT16__IPU2_DISP0_DAT_16 = IOMUX_PAD(0x04C4, 0x01B0, 1, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT16__ECSPI2_MOSI = IOMUX_PAD(0x04C4, 0x01B0, 2, 0x0818, 1, 0),
- MX6Q_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC = IOMUX_PAD(0x04C4, 0x01B0, 3, 0x07DC, 0, 0),
- MX6Q_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 = IOMUX_PAD(0x04C4, 0x01B0, 4, 0x090C, 0, 0),
- MX6Q_PAD_DISP0_DAT16__GPIO_5_10 = IOMUX_PAD(0x04C4, 0x01B0, 5, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT16__MMDC_DEBUG_21 = IOMUX_PAD(0x04C4, 0x01B0, 6, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT16__PL301_PER1_HADR26 = IOMUX_PAD(0x04C4, 0x01B0, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17 = IOMUX_PAD(0x04C8, 0x01B4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6Q_PAD_DISP0_DAT17__IPU2_DISP0_DAT_17 = IOMUX_PAD(0x04C8, 0x01B4, 1, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT17__ECSPI2_MISO = IOMUX_PAD(0x04C8, 0x01B4, 2, 0x0814, 1, 0),
- MX6Q_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD = IOMUX_PAD(0x04C8, 0x01B4, 3, 0x07D0, 0, 0),
- MX6Q_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 = IOMUX_PAD(0x04C8, 0x01B4, 4, 0x0910, 0, 0),
- MX6Q_PAD_DISP0_DAT17__GPIO_5_11 = IOMUX_PAD(0x04C8, 0x01B4, 5, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT17__MMDC_DEBUG_22 = IOMUX_PAD(0x04C8, 0x01B4, 6, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT17__PL301_PER1_HADR27 = IOMUX_PAD(0x04C8, 0x01B4, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18 = IOMUX_PAD(0x04CC, 0x01B8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6Q_PAD_DISP0_DAT18__IPU2_DISP0_DAT_18 = IOMUX_PAD(0x04CC, 0x01B8, 1, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT18__ECSPI2_SS0 = IOMUX_PAD(0x04CC, 0x01B8, 2, 0x081C, 1, 0),
- MX6Q_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS = IOMUX_PAD(0x04CC, 0x01B8, 3, 0x07E0, 0, 0),
- MX6Q_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS = IOMUX_PAD(0x04CC, 0x01B8, 4, 0x07C0, 0, 0),
- MX6Q_PAD_DISP0_DAT18__GPIO_5_12 = IOMUX_PAD(0x04CC, 0x01B8, 5, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT18__MMDC_DEBUG_23 = IOMUX_PAD(0x04CC, 0x01B8, 6, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT18__WEIM_WEIM_CS_2 = IOMUX_PAD(0x04CC, 0x01B8, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19 = IOMUX_PAD(0x04D0, 0x01BC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6Q_PAD_DISP0_DAT19__IPU2_DISP0_DAT_19 = IOMUX_PAD(0x04D0, 0x01BC, 1, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT19__ECSPI2_SCLK = IOMUX_PAD(0x04D0, 0x01BC, 2, 0x0810, 1, 0),
- MX6Q_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD = IOMUX_PAD(0x04D0, 0x01BC, 3, 0x07CC, 0, 0),
- MX6Q_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC = IOMUX_PAD(0x04D0, 0x01BC, 4, 0x07BC, 0, 0),
- MX6Q_PAD_DISP0_DAT19__GPIO_5_13 = IOMUX_PAD(0x04D0, 0x01BC, 5, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT19__MMDC_DEBUG_24 = IOMUX_PAD(0x04D0, 0x01BC, 6, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT19__WEIM_WEIM_CS_3 = IOMUX_PAD(0x04D0, 0x01BC, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20 = IOMUX_PAD(0x04D4, 0x01C0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6Q_PAD_DISP0_DAT20__IPU2_DISP0_DAT_20 = IOMUX_PAD(0x04D4, 0x01C0, 1, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT20__ECSPI1_SCLK = IOMUX_PAD(0x04D4, 0x01C0, 2, 0x07F4, 1, 0),
- MX6Q_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC = IOMUX_PAD(0x04D4, 0x01C0, 3, 0x07C4, 0, 0),
- MX6Q_PAD_DISP0_DAT20__SDMA_DBG_EVT_CHN7 = IOMUX_PAD(0x04D4, 0x01C0, 4, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT20__GPIO_5_14 = IOMUX_PAD(0x04D4, 0x01C0, 5, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT20__MMDC_DEBUG_25 = IOMUX_PAD(0x04D4, 0x01C0, 6, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT20__PL301_PER1_HADR28 = IOMUX_PAD(0x04D4, 0x01C0, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21 = IOMUX_PAD(0x04D8, 0x01C4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6Q_PAD_DISP0_DAT21__IPU2_DISP0_DAT_21 = IOMUX_PAD(0x04D8, 0x01C4, 1, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT21__ECSPI1_MOSI = IOMUX_PAD(0x04D8, 0x01C4, 2, 0x07FC, 1, 0),
- MX6Q_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD = IOMUX_PAD(0x04D8, 0x01C4, 3, 0x07B8, 1, 0),
- MX6Q_PAD_DISP0_DAT21__SDMA_DBG_BUS_DEV0 = IOMUX_PAD(0x04D8, 0x01C4, 4, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT21__GPIO_5_15 = IOMUX_PAD(0x04D8, 0x01C4, 5, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT21__MMDC_DEBUG_26 = IOMUX_PAD(0x04D8, 0x01C4, 6, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT21__PL301_PER1_HADR29 = IOMUX_PAD(0x04D8, 0x01C4, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22 = IOMUX_PAD(0x04DC, 0x01C8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6Q_PAD_DISP0_DAT22__IPU2_DISP0_DAT_22 = IOMUX_PAD(0x04DC, 0x01C8, 1, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT22__ECSPI1_MISO = IOMUX_PAD(0x04DC, 0x01C8, 2, 0x07F8, 1, 0),
- MX6Q_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS = IOMUX_PAD(0x04DC, 0x01C8, 3, 0x07C8, 1, 0),
- MX6Q_PAD_DISP0_DAT22__SDMA_DBG_BUS_DEV1 = IOMUX_PAD(0x04DC, 0x01C8, 4, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT22__GPIO_5_16 = IOMUX_PAD(0x04DC, 0x01C8, 5, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT22__MMDC_DEBUG_27 = IOMUX_PAD(0x04DC, 0x01C8, 6, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT22__PL301_PER1_HADR30 = IOMUX_PAD(0x04DC, 0x01C8, 7, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23 = IOMUX_PAD(0x04E0, 0x01CC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6Q_PAD_DISP0_DAT23__IPU2_DISP0_DAT_23 = IOMUX_PAD(0x04E0, 0x01CC, 1, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT23__ECSPI1_SS0 = IOMUX_PAD(0x04E0, 0x01CC, 2, 0x0800, 1, 0),
- MX6Q_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD = IOMUX_PAD(0x04E0, 0x01CC, 3, 0x07B4, 1, 0),
- MX6Q_PAD_DISP0_DAT23__SDMA_DBG_BUS_DEV2 = IOMUX_PAD(0x04E0, 0x01CC, 4, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT23__GPIO_5_17 = IOMUX_PAD(0x04E0, 0x01CC, 5, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT23__MMDC_DEBUG_28 = IOMUX_PAD(0x04E0, 0x01CC, 6, 0x0000, 0, 0),
- MX6Q_PAD_DISP0_DAT23__PL301_PER1_HADR31 = IOMUX_PAD(0x04E0, 0x01CC, 7, 0x0000, 0, 0),
- MX6Q_PAD_ENET_MDIO__RESERVED_RESERVED = IOMUX_PAD(0x04E4, 0x01D0, 0, 0x0000, 0, 0),
- MX6Q_PAD_ENET_MDIO__ENET_MDIO = IOMUX_PAD(0x04E4, 0x01D0, 1, 0x0840, 0, 0),
- MX6Q_PAD_ENET_MDIO__ESAI1_SCKR = IOMUX_PAD(0x04E4, 0x01D0, 2, 0x086C, 0, 0),
- MX6Q_PAD_ENET_MDIO__SDMA_DEBUG_BUS_DEV3 = IOMUX_PAD(0x04E4, 0x01D0, 3, 0x0000, 0, 0),
- MX6Q_PAD_ENET_MDIO__ENET_1588_EVT1_OUT = IOMUX_PAD(0x04E4, 0x01D0, 4, 0x0000, 0, 0),
- MX6Q_PAD_ENET_MDIO__GPIO_1_22 = IOMUX_PAD(0x04E4, 0x01D0, 5, 0x0000, 0, 0),
- MX6Q_PAD_ENET_MDIO__SPDIF_PLOCK = IOMUX_PAD(0x04E4, 0x01D0, 6, 0x0000, 0, 0),
- MX6Q_PAD_ENET_REF_CLK__RESERVED_RSRVED = IOMUX_PAD(0x04E8, 0x01D4, 0, 0x0000, 0, 0),
- MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK = IOMUX_PAD(0x04E8, 0x01D4, 1, 0x0000, 0, 0),
- MX6Q_PAD_ENET_REF_CLK__ESAI1_FSR = IOMUX_PAD(0x04E8, 0x01D4, 2, 0x085C, 0, 0),
- MX6Q_PAD_ENET_REF_CLK__SDMA_DBGBUS_DEV4 = IOMUX_PAD(0x04E8, 0x01D4, 3, 0x0000, 0, 0),
- MX6Q_PAD_ENET_REF_CLK__GPIO_1_23 = IOMUX_PAD(0x04E8, 0x01D4, 5, 0x0000, 0, 0),
- MX6Q_PAD_ENET_REF_CLK__SPDIF_SRCLK = IOMUX_PAD(0x04E8, 0x01D4, 6, 0x0000, 0, 0),
- MX6Q_PAD_ENET_REF_CLK__USBPHY1_RX_SQH = IOMUX_PAD(0x04E8, 0x01D4, 7, 0x0000, 0, 0),
- MX6Q_PAD_ENET_RX_ER__ENET_RX_ER = IOMUX_PAD(0x04EC, 0x01D8, 1, 0x0000, 0, 0),
- MX6Q_PAD_ENET_RX_ER__ESAI1_HCKR = IOMUX_PAD(0x04EC, 0x01D8, 2, 0x0864, 0, 0),
- MX6Q_PAD_ENET_RX_ER__SPDIF_IN1 = IOMUX_PAD(0x04EC, 0x01D8, 3, 0x0914, 1, 0),
- MX6Q_PAD_ENET_RX_ER__ENET_1588_EVT2_OUT = IOMUX_PAD(0x04EC, 0x01D8, 4, 0x0000, 0, 0),
- MX6Q_PAD_ENET_RX_ER__GPIO_1_24 = IOMUX_PAD(0x04EC, 0x01D8, 5, 0x0000, 0, 0),
- MX6Q_PAD_ENET_RX_ER__PHY_TDI = IOMUX_PAD(0x04EC, 0x01D8, 6, 0x0000, 0, 0),
- MX6Q_PAD_ENET_RX_ER__USBPHY1_RX_HS_RXD = IOMUX_PAD(0x04EC, 0x01D8, 7, 0x0000, 0, 0),
- MX6Q_PAD_ENET_CRS_DV__RESERVED_RSRVED = IOMUX_PAD(0x04F0, 0x01DC, 0, 0x0000, 0, 0),
- MX6Q_PAD_ENET_CRS_DV__ENET_RX_EN = IOMUX_PAD(0x04F0, 0x01DC, 1, 0x0858, 1, 0),
- MX6Q_PAD_ENET_CRS_DV__ESAI1_SCKT = IOMUX_PAD(0x04F0, 0x01DC, 2, 0x0870, 0, 0),
- MX6Q_PAD_ENET_CRS_DV__SPDIF_EXTCLK = IOMUX_PAD(0x04F0, 0x01DC, 3, 0x0918, 1, 0),
- MX6Q_PAD_ENET_CRS_DV__GPIO_1_25 = IOMUX_PAD(0x04F0, 0x01DC, 5, 0x0000, 0, 0),
- MX6Q_PAD_ENET_CRS_DV__PHY_TDO = IOMUX_PAD(0x04F0, 0x01DC, 6, 0x0000, 0, 0),
- MX6Q_PAD_ENET_CRS_DV__USBPHY1_RX_FS_RXD = IOMUX_PAD(0x04F0, 0x01DC, 7, 0x0000, 0, 0),
- MX6Q_PAD_ENET_RXD1__MLB_MLBSIG = IOMUX_PAD(0x04F4, 0x01E0, 0, 0x0908, 0, 0),
- MX6Q_PAD_ENET_RXD1__ENET_RDATA_1 = IOMUX_PAD(0x04F4, 0x01E0, 1, 0x084C, 1, 0),
- MX6Q_PAD_ENET_RXD1__ESAI1_FST = IOMUX_PAD(0x04F4, 0x01E0, 2, 0x0860, 0, 0),
- MX6Q_PAD_ENET_RXD1__ENET_1588_EVT3_OUT = IOMUX_PAD(0x04F4, 0x01E0, 4, 0x0000, 0, 0),
- MX6Q_PAD_ENET_RXD1__GPIO_1_26 = IOMUX_PAD(0x04F4, 0x01E0, 5, 0x0000, 0, 0),
- MX6Q_PAD_ENET_RXD1__PHY_TCK = IOMUX_PAD(0x04F4, 0x01E0, 6, 0x0000, 0, 0),
- MX6Q_PAD_ENET_RXD1__USBPHY1_RX_DISCON = IOMUX_PAD(0x04F4, 0x01E0, 7, 0x0000, 0, 0),
- MX6Q_PAD_ENET_RXD0__OSC32K_32K_OUT = IOMUX_PAD(0x04F8, 0x01E4, 0, 0x0000, 0, 0),
- MX6Q_PAD_ENET_RXD0__ENET_RDATA_0 = IOMUX_PAD(0x04F8, 0x01E4, 1, 0x0848, 1, 0),
- MX6Q_PAD_ENET_RXD0__ESAI1_HCKT = IOMUX_PAD(0x04F8, 0x01E4, 2, 0x0868, 0, 0),
- MX6Q_PAD_ENET_RXD0__SPDIF_OUT1 = IOMUX_PAD(0x04F8, 0x01E4, 3, 0x0000, 0, 0),
- MX6Q_PAD_ENET_RXD0__GPIO_1_27 = IOMUX_PAD(0x04F8, 0x01E4, 5, 0x0000, 0, 0),
- MX6Q_PAD_ENET_RXD0__PHY_TMS = IOMUX_PAD(0x04F8, 0x01E4, 6, 0x0000, 0, 0),
- MX6Q_PAD_ENET_RXD0__USBPHY1_PLL_CK20DIV = IOMUX_PAD(0x04F8, 0x01E4, 7, 0x0000, 0, 0),
- MX6Q_PAD_ENET_TX_EN__RESERVED_RSRVED = IOMUX_PAD(0x04FC, 0x01E8, 0, 0x0000, 0, 0),
- MX6Q_PAD_ENET_TX_EN__ENET_TX_EN = IOMUX_PAD(0x04FC, 0x01E8, 1, 0x0000, 0, 0),
- MX6Q_PAD_ENET_TX_EN__ESAI1_TX3_RX2 = IOMUX_PAD(0x04FC, 0x01E8, 2, 0x0880, 0, 0),
- MX6Q_PAD_ENET_TX_EN__GPIO_1_28 = IOMUX_PAD(0x04FC, 0x01E8, 5, 0x0000, 0, 0),
- MX6Q_PAD_ENET_TX_EN__SATA_PHY_TDI = IOMUX_PAD(0x04FC, 0x01E8, 6, 0x0000, 0, 0),
- MX6Q_PAD_ENET_TX_EN__USBPHY2_RX_SQH = IOMUX_PAD(0x04FC, 0x01E8, 7, 0x0000, 0, 0),
- MX6Q_PAD_ENET_TXD1__MLB_MLBCLK = IOMUX_PAD(0x0500, 0x01EC, 0, 0x0900, 0, 0),
- MX6Q_PAD_ENET_TXD1__ENET_TDATA_1 = IOMUX_PAD(0x0500, 0x01EC, 1, 0x0000, 0, 0),
- MX6Q_PAD_ENET_TXD1__ESAI1_TX2_RX3 = IOMUX_PAD(0x0500, 0x01EC, 2, 0x087C, 0, 0),
- MX6Q_PAD_ENET_TXD1__ENET_1588_EVENT0_IN = IOMUX_PAD(0x0500, 0x01EC, 4, 0x0000, 0, 0),
- MX6Q_PAD_ENET_TXD1__GPIO_1_29 = IOMUX_PAD(0x0500, 0x01EC, 5, 0x0000, 0, 0),
- MX6Q_PAD_ENET_TXD1__SATA_PHY_TDO = IOMUX_PAD(0x0500, 0x01EC, 6, 0x0000, 0, 0),
- MX6Q_PAD_ENET_TXD1__USBPHY2_RX_HS_RXD = IOMUX_PAD(0x0500, 0x01EC, 7, 0x0000, 0, 0),
- MX6Q_PAD_ENET_TXD0__RESERVED_RSRVED = IOMUX_PAD(0x0504, 0x01F0, 0, 0x0000, 0, 0),
- MX6Q_PAD_ENET_TXD0__ENET_TDATA_0 = IOMUX_PAD(0x0504, 0x01F0, 1, 0x0000, 0, 0),
- MX6Q_PAD_ENET_TXD0__ESAI1_TX4_RX1 = IOMUX_PAD(0x0504, 0x01F0, 2, 0x0884, 0, 0),
- MX6Q_PAD_ENET_TXD0__GPIO_1_30 = IOMUX_PAD(0x0504, 0x01F0, 5, 0x0000, 0, 0),
- MX6Q_PAD_ENET_TXD0__SATA_PHY_TCK = IOMUX_PAD(0x0504, 0x01F0, 6, 0x0000, 0, 0),
- MX6Q_PAD_ENET_TXD0__USBPHY2_RX_FS_RXD = IOMUX_PAD(0x0504, 0x01F0, 7, 0x0000, 0, 0),
- MX6Q_PAD_ENET_MDC__MLB_MLBDAT = IOMUX_PAD(0x0508, 0x01F4, 0, 0x0904, 0, 0),
- MX6Q_PAD_ENET_MDC__ENET_MDC = IOMUX_PAD(0x0508, 0x01F4, 1, 0x0000, 0, 0),
- MX6Q_PAD_ENET_MDC__ESAI1_TX5_RX0 = IOMUX_PAD(0x0508, 0x01F4, 2, 0x0888, 0, 0),
- MX6Q_PAD_ENET_MDC__ENET_1588_EVENT1_IN = IOMUX_PAD(0x0508, 0x01F4, 4, 0x0000, 0, 0),
- MX6Q_PAD_ENET_MDC__GPIO_1_31 = IOMUX_PAD(0x0508, 0x01F4, 5, 0x0000, 0, 0),
- MX6Q_PAD_ENET_MDC__SATA_PHY_TMS = IOMUX_PAD(0x0508, 0x01F4, 6, 0x0000, 0, 0),
- MX6Q_PAD_ENET_MDC__USBPHY2_RX_DISCON = IOMUX_PAD(0x0508, 0x01F4, 7, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D40__MMDC_DRAM_D_40 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D41__MMDC_DRAM_D_41 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D42__MMDC_DRAM_D_42 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D43__MMDC_DRAM_D_43 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D44__MMDC_DRAM_D_44 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D45__MMDC_DRAM_D_45 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D46__MMDC_DRAM_D_46 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D47__MMDC_DRAM_D_47 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_SDQS5__MMDC_DRAM_SDQS_5 = IOMUX_PAD(0x050C, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_DQM5__MMDC_DRAM_DQM_5 = IOMUX_PAD(0x0510, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D32__MMDC_DRAM_D_32 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D33__MMDC_DRAM_D_33 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D34__MMDC_DRAM_D_34 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D35__MMDC_DRAM_D_35 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D36__MMDC_DRAM_D_36 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D37__MMDC_DRAM_D_37 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D38__MMDC_DRAM_D_38 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D39__MMDC_DRAM_D_39 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_DQM4__MMDC_DRAM_DQM_4 = IOMUX_PAD(0x0514, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_SDQS4__MMDC_DRAM_SDQS_4 = IOMUX_PAD(0x0518, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D24__MMDC_DRAM_D_24 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D25__MMDC_DRAM_D_25 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D26__MMDC_DRAM_D_26 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D27__MMDC_DRAM_D_27 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D28__MMDC_DRAM_D_28 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D29__MMDC_DRAM_D_29 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_SDQS3__MMDC_DRAM_SDQS_3 = IOMUX_PAD(0x051C, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D30__MMDC_DRAM_D_30 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D31__MMDC_DRAM_D_31 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_DQM3__MMDC_DRAM_DQM_3 = IOMUX_PAD(0x0520, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D16__MMDC_DRAM_D_16 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D17__MMDC_DRAM_D_17 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D18__MMDC_DRAM_D_18 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D19__MMDC_DRAM_D_19 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D20__MMDC_DRAM_D_20 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D21__MMDC_DRAM_D_21 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D22__MMDC_DRAM_D_22 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_SDQS2__MMDC_DRAM_SDQS_2 = IOMUX_PAD(0x0524, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D23__MMDC_DRAM_D_23 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_DQM2__MMDC_DRAM_DQM_2 = IOMUX_PAD(0x0528, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_A0__MMDC_DRAM_A_0 = IOMUX_PAD(0x052C, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_A1__MMDC_DRAM_A_1 = IOMUX_PAD(0x0530, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_A2__MMDC_DRAM_A_2 = IOMUX_PAD(0x0534, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_A3__MMDC_DRAM_A_3 = IOMUX_PAD(0x0538, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_A4__MMDC_DRAM_A_4 = IOMUX_PAD(0x053C, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_A5__MMDC_DRAM_A_5 = IOMUX_PAD(0x0540, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_A6__MMDC_DRAM_A_6 = IOMUX_PAD(0x0544, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_A7__MMDC_DRAM_A_7 = IOMUX_PAD(0x0548, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_A8__MMDC_DRAM_A_8 = IOMUX_PAD(0x054C, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_A9__MMDC_DRAM_A_9 = IOMUX_PAD(0x0550, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_A10__MMDC_DRAM_A_10 = IOMUX_PAD(0x0554, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_A11__MMDC_DRAM_A_11 = IOMUX_PAD(0x0558, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_A12__MMDC_DRAM_A_12 = IOMUX_PAD(0x055C, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_A13__MMDC_DRAM_A_13 = IOMUX_PAD(0x0560, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_A14__MMDC_DRAM_A_14 = IOMUX_PAD(0x0564, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_A15__MMDC_DRAM_A_15 = IOMUX_PAD(0x0568, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_CAS__MMDC_DRAM_CAS = IOMUX_PAD(0x056C, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_CS0__MMDC_DRAM_CS_0 = IOMUX_PAD(0x0570, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_CS1__MMDC_DRAM_CS_1 = IOMUX_PAD(0x0574, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_RAS__MMDC_DRAM_RAS = IOMUX_PAD(0x0578, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_RESET__MMDC_DRAM_RESET = IOMUX_PAD(0x057C, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_SDBA0__MMDC_DRAM_SDBA_0 = IOMUX_PAD(0x0580, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_SDBA1__MMDC_DRAM_SDBA_1 = IOMUX_PAD(0x0584, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_SDCLK_0__MMDC_DRAM_SDCLK0 = IOMUX_PAD(0x0588, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_SDBA2__MMDC_DRAM_SDBA_2 = IOMUX_PAD(0x058C, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_SDCKE0__MMDC_DRAM_SDCKE_0 = IOMUX_PAD(0x0590, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_SDCLK_1__MMDC_DRAM_SDCLK1 = IOMUX_PAD(0x0594, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_SDCKE1__MMDC_DRAM_SDCKE_1 = IOMUX_PAD(0x0598, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_SDODT0__MMDC_DRAM_ODT_0 = IOMUX_PAD(0x059C, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_SDODT1__MMDC_DRAM_ODT_1 = IOMUX_PAD(0x05A0, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_SDWE__MMDC_DRAM_SDWE = IOMUX_PAD(0x05A4, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D0__MMDC_DRAM_D_0 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D1__MMDC_DRAM_D_1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D2__MMDC_DRAM_D_2 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D3__MMDC_DRAM_D_3 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D4__MMDC_DRAM_D_4 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D5__MMDC_DRAM_D_5 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_SDQS0__MMDC_DRAM_SDQS_0 = IOMUX_PAD(0x05A8, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D6__MMDC_DRAM_D_6 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D7__MMDC_DRAM_D_7 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_DQM0__MMDC_DRAM_DQM_0 = IOMUX_PAD(0x05AC, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D8__MMDC_DRAM_D_8 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D9__MMDC_DRAM_D_9 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D10__MMDC_DRAM_D_10 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D11__MMDC_DRAM_D_11 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D12__MMDC_DRAM_D_12 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D13__MMDC_DRAM_D_13 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D14__MMDC_DRAM_D_14 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_SDQS1__MMDC_DRAM_SDQS_1 = IOMUX_PAD(0x05B0, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D15__MMDC_DRAM_D_15 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_DQM1__MMDC_DRAM_DQM_1 = IOMUX_PAD(0x05B4, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D48__MMDC_DRAM_D_48 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D49__MMDC_DRAM_D_49 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D50__MMDC_DRAM_D_50 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D51__MMDC_DRAM_D_51 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D52__MMDC_DRAM_D_52 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D53__MMDC_DRAM_D_53 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D54__MMDC_DRAM_D_54 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D55__MMDC_DRAM_D_55 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_SDQS6__MMDC_DRAM_SDQS_6 = IOMUX_PAD(0x05B8, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_DQM6__MMDC_DRAM_DQM_6 = IOMUX_PAD(0x05BC, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D56__MMDC_DRAM_D_56 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_SDQS7__MMDC_DRAM_SDQS_7 = IOMUX_PAD(0x05C0, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D57__MMDC_DRAM_D_57 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D58__MMDC_DRAM_D_58 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D59__MMDC_DRAM_D_59 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D60__MMDC_DRAM_D_60 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_DQM7__MMDC_DRAM_DQM_7 = IOMUX_PAD(0x05C4, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D61__MMDC_DRAM_D_61 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D62__MMDC_DRAM_D_62 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_DRAM_D63__MMDC_DRAM_D_63 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_KEY_COL0__ECSPI1_SCLK = IOMUX_PAD(0x05C8, 0x01F8, 0, 0x07F4, 2, 0),
- MX6Q_PAD_KEY_COL0__ENET_RDATA_3 = IOMUX_PAD(0x05C8, 0x01F8, 1, 0x0854, 1, 0),
- MX6Q_PAD_KEY_COL0__AUDMUX_AUD5_TXC = IOMUX_PAD(0x05C8, 0x01F8, 2, 0x07DC, 1, 0),
- MX6Q_PAD_KEY_COL0__KPP_COL_0 = IOMUX_PAD(0x05C8, 0x01F8, 3, 0x0000, 0, 0),
- MX6Q_PAD_KEY_COL0__UART4_TXD = IOMUX_PAD(0x05C8, 0x01F8, 4, 0x0000, 0, 0),
- MX6Q_PAD_KEY_COL0__UART4_TXD_RXD = IOMUX_PAD(0x05C8, 0x01F8, 4, 0x0938, 0, 0),
- MX6Q_PAD_KEY_COL0__GPIO_4_6 = IOMUX_PAD(0x05C8, 0x01F8, 5, 0x0000, 0, 0),
- MX6Q_PAD_KEY_COL0__DCIC1_DCIC_OUT = IOMUX_PAD(0x05C8, 0x01F8, 6, 0x0000, 0, 0),
- MX6Q_PAD_KEY_COL0__SRC_ANY_PU_RST = IOMUX_PAD(0x05C8, 0x01F8, 7, 0x0000, 0, 0),
- MX6Q_PAD_KEY_ROW0__ECSPI1_MOSI = IOMUX_PAD(0x05CC, 0x01FC, 0, 0x07FC, 2, 0),
- MX6Q_PAD_KEY_ROW0__ENET_TDATA_3 = IOMUX_PAD(0x05CC, 0x01FC, 1, 0x0000, 0, 0),
- MX6Q_PAD_KEY_ROW0__AUDMUX_AUD5_TXD = IOMUX_PAD(0x05CC, 0x01FC, 2, 0x07D0, 1, 0),
- MX6Q_PAD_KEY_ROW0__KPP_ROW_0 = IOMUX_PAD(0x05CC, 0x01FC, 3, 0x0000, 0, 0),
- MX6Q_PAD_KEY_ROW0__UART4_RXD = IOMUX_PAD(0x05CC, 0x01FC, 4, 0x0938, 1, 0),
- MX6Q_PAD_KEY_ROW0__GPIO_4_7 = IOMUX_PAD(0x05CC, 0x01FC, 5, 0x0000, 0, 0),
- MX6Q_PAD_KEY_ROW0__DCIC2_DCIC_OUT = IOMUX_PAD(0x05CC, 0x01FC, 6, 0x0000, 0, 0),
- MX6Q_PAD_KEY_ROW0__PL301_PER1_HADR_0 = IOMUX_PAD(0x05CC, 0x01FC, 7, 0x0000, 0, 0),
- MX6Q_PAD_KEY_COL1__ECSPI1_MISO = IOMUX_PAD(0x05D0, 0x0200, 0, 0x07F8, 2, 0),
- MX6Q_PAD_KEY_COL1__ENET_MDIO = IOMUX_PAD(0x05D0, 0x0200, 1, 0x0840, 1, 0),
- MX6Q_PAD_KEY_COL1__AUDMUX_AUD5_TXFS = IOMUX_PAD(0x05D0, 0x0200, 2, 0x07E0, 1, 0),
- MX6Q_PAD_KEY_COL1__KPP_COL_1 = IOMUX_PAD(0x05D0, 0x0200, 3, 0x0000, 0, 0),
- MX6Q_PAD_KEY_COL1__UART5_TXD = IOMUX_PAD(0x05D0, 0x0200, 4, 0x0000, 0, 0),
- MX6Q_PAD_KEY_COL1__UART5_TXD_RXD = IOMUX_PAD(0x05D0, 0x0200, 4, 0x0940, 0, 0),
- MX6Q_PAD_KEY_COL1__GPIO_4_8 = IOMUX_PAD(0x05D0, 0x0200, 5, 0x0000, 0, 0),
- MX6Q_PAD_KEY_COL1__USDHC1_VSELECT = IOMUX_PAD(0x05D0, 0x0200, 6, 0x0000, 0, 0),
- MX6Q_PAD_KEY_COL1__PL301MX_PER1_HADR_1 = IOMUX_PAD(0x05D0, 0x0200, 7, 0x0000, 0, 0),
- MX6Q_PAD_KEY_ROW1__ECSPI1_SS0 = IOMUX_PAD(0x05D4, 0x0204, 0, 0x0800, 2, 0),
- MX6Q_PAD_KEY_ROW1__ENET_COL = IOMUX_PAD(0x05D4, 0x0204, 1, 0x0000, 0, 0),
- MX6Q_PAD_KEY_ROW1__AUDMUX_AUD5_RXD = IOMUX_PAD(0x05D4, 0x0204, 2, 0x07CC, 1, 0),
- MX6Q_PAD_KEY_ROW1__KPP_ROW_1 = IOMUX_PAD(0x05D4, 0x0204, 3, 0x0000, 0, 0),
- MX6Q_PAD_KEY_ROW1__UART5_RXD = IOMUX_PAD(0x05D4, 0x0204, 4, 0x0940, 1, 0),
- MX6Q_PAD_KEY_ROW1__GPIO_4_9 = IOMUX_PAD(0x05D4, 0x0204, 5, 0x0000, 0, 0),
- MX6Q_PAD_KEY_ROW1__USDHC2_VSELECT = IOMUX_PAD(0x05D4, 0x0204, 6, 0x0000, 0, 0),
- MX6Q_PAD_KEY_ROW1__PL301_PER1_HADDR_2 = IOMUX_PAD(0x05D4, 0x0204, 7, 0x0000, 0, 0),
- MX6Q_PAD_KEY_COL2__ECSPI1_SS1 = IOMUX_PAD(0x05D8, 0x0208, 0, 0x0804, 2, 0),
- MX6Q_PAD_KEY_COL2__ENET_RDATA_2 = IOMUX_PAD(0x05D8, 0x0208, 1, 0x0850, 1, 0),
- MX6Q_PAD_KEY_COL2__CAN1_TXCAN = IOMUX_PAD(0x05D8, 0x0208, 2, 0x0000, 0, 0),
- MX6Q_PAD_KEY_COL2__KPP_COL_2 = IOMUX_PAD(0x05D8, 0x0208, 3, 0x0000, 0, 0),
- MX6Q_PAD_KEY_COL2__ENET_MDC = IOMUX_PAD(0x05D8, 0x0208, 4, 0x0000, 0, 0),
- MX6Q_PAD_KEY_COL2__GPIO_4_10 = IOMUX_PAD(0x05D8, 0x0208, 5, 0x0000, 0, 0),
- MX6Q_PAD_KEY_COL2__USBOH3_H1_PWRCTL_WKP = IOMUX_PAD(0x05D8, 0x0208, 6, 0x0000, 0, 0),
- MX6Q_PAD_KEY_COL2__PL301_PER1_HADDR_3 = IOMUX_PAD(0x05D8, 0x0208, 7, 0x0000, 0, 0),
- MX6Q_PAD_KEY_ROW2__ECSPI1_SS2 = IOMUX_PAD(0x05DC, 0x020C, 0, 0x0808, 1, 0),
- MX6Q_PAD_KEY_ROW2__ENET_TDATA_2 = IOMUX_PAD(0x05DC, 0x020C, 1, 0x0000, 0, 0),
- MX6Q_PAD_KEY_ROW2__CAN1_RXCAN = IOMUX_PAD(0x05DC, 0x020C, 2, 0x07E4, 0, 0),
- MX6Q_PAD_KEY_ROW2__KPP_ROW_2 = IOMUX_PAD(0x05DC, 0x020C, 3, 0x0000, 0, 0),
- MX6Q_PAD_KEY_ROW2__USDHC2_VSELECT = IOMUX_PAD(0x05DC, 0x020C, 4, 0x0000, 0, 0),
- MX6Q_PAD_KEY_ROW2__GPIO_4_11 = IOMUX_PAD(0x05DC, 0x020C, 5, 0x0000, 0, 0),
- MX6Q_PAD_KEY_ROW2__HDMI_TX_CEC_LINE = IOMUX_PAD(0x05DC, 0x020C, 6, 0x088C, 1, 0),
- MX6Q_PAD_KEY_ROW2__PL301_PER1_HADR_4 = IOMUX_PAD(0x05DC, 0x020C, 7, 0x0000, 0, 0),
- MX6Q_PAD_KEY_COL3__ECSPI1_SS3 = IOMUX_PAD(0x05E0, 0x0210, 0, 0x080C, 1, 0),
- MX6Q_PAD_KEY_COL3__ENET_CRS = IOMUX_PAD(0x05E0, 0x0210, 1, 0x0000, 0, 0),
- MX6Q_PAD_KEY_COL3__HDMI_TX_DDC_SCL = IOMUX_PAD(0x05E0, 0x0210, 2, 0x0890, 1, 0),
- MX6Q_PAD_KEY_COL3__KPP_COL_3 = IOMUX_PAD(0x05E0, 0x0210, 3, 0x0000, 0, 0),
- MX6Q_PAD_KEY_COL3__I2C2_SCL = IOMUX_PAD(0x05E0, 0x0210, 20, 0x08A0, 1, 0),
- MX6Q_PAD_KEY_COL3__GPIO_4_12 = IOMUX_PAD(0x05E0, 0x0210, 5, 0x0000, 0, 0),
- MX6Q_PAD_KEY_COL3__SPDIF_IN1 = IOMUX_PAD(0x05E0, 0x0210, 6, 0x0914, 2, 0),
- MX6Q_PAD_KEY_COL3__PL301_PER1_HADR_5 = IOMUX_PAD(0x05E0, 0x0210, 7, 0x0000, 0, 0),
- MX6Q_PAD_KEY_ROW3__OSC32K_32K_OUT = IOMUX_PAD(0x05E4, 0x0214, 0, 0x0000, 0, 0),
- MX6Q_PAD_KEY_ROW3__ASRC_ASRC_EXT_CLK = IOMUX_PAD(0x05E4, 0x0214, 1, 0x07B0, 0, 0),
- MX6Q_PAD_KEY_ROW3__HDMI_TX_DDC_SDA = IOMUX_PAD(0x05E4, 0x0214, 2, 0x0894, 1, 0),
- MX6Q_PAD_KEY_ROW3__KPP_ROW_3 = IOMUX_PAD(0x05E4, 0x0214, 3, 0x0000, 0, 0),
- MX6Q_PAD_KEY_ROW3__I2C2_SDA = IOMUX_PAD(0x05E4, 0x0214, 20, 0x08A4, 1, 0),
- MX6Q_PAD_KEY_ROW3__GPIO_4_13 = IOMUX_PAD(0x05E4, 0x0214, 5, 0x0000, 0, 0),
- MX6Q_PAD_KEY_ROW3__USDHC1_VSELECT = IOMUX_PAD(0x05E4, 0x0214, 6, 0x0000, 0, 0),
- MX6Q_PAD_KEY_ROW3__PL301_PER1_HADR_6 = IOMUX_PAD(0x05E4, 0x0214, 7, 0x0000, 0, 0),
- MX6Q_PAD_KEY_COL4__CAN2_TXCAN = IOMUX_PAD(0x05E8, 0x0218, 0, 0x0000, 0, 0),
- MX6Q_PAD_KEY_COL4__IPU1_SISG_4 = IOMUX_PAD(0x05E8, 0x0218, 1, 0x0000, 0, 0),
- MX6Q_PAD_KEY_COL4__USBOH3_USBOTG_OC = IOMUX_PAD(0x05E8, 0x0218, 2, 0x0944, 1, 0),
- MX6Q_PAD_KEY_COL4__KPP_COL_4 = IOMUX_PAD(0x05E8, 0x0218, 3, 0x0000, 0, 0),
- MX6Q_PAD_KEY_COL4__UART5_CTS = IOMUX_PAD(0x05E8, 0x0218, 4, 0x0000, 0, 0),
- MX6Q_PAD_KEY_COL4__UART5_RTS = IOMUX_PAD(0x05E8, 0x0218, 4, 0x093C, 0, 0),
- MX6Q_PAD_KEY_COL4__GPIO_4_14 = IOMUX_PAD(0x05E8, 0x0218, 5, 0x0000, 0, 0),
- MX6Q_PAD_KEY_COL4__MMDC_DEBUG_49 = IOMUX_PAD(0x05E8, 0x0218, 6, 0x0000, 0, 0),
- MX6Q_PAD_KEY_COL4__PL301_PER1_HADDR_7 = IOMUX_PAD(0x05E8, 0x0218, 7, 0x0000, 0, 0),
- MX6Q_PAD_KEY_ROW4__CAN2_RXCAN = IOMUX_PAD(0x05EC, 0x021C, 0, 0x07E8, 0, 0),
- MX6Q_PAD_KEY_ROW4__IPU1_SISG_5 = IOMUX_PAD(0x05EC, 0x021C, 1, 0x0000, 0, 0),
- MX6Q_PAD_KEY_ROW4__USBOH3_USBOTG_PWR = IOMUX_PAD(0x05EC, 0x021C, 2, 0x0000, 0, 0),
- MX6Q_PAD_KEY_ROW4__KPP_ROW_4 = IOMUX_PAD(0x05EC, 0x021C, 3, 0x0000, 0, 0),
- MX6Q_PAD_KEY_ROW4__UART5_CTS = IOMUX_PAD(0x05EC, 0x021C, 4, 0x093C, 1, 0),
- MX6Q_PAD_KEY_ROW4__GPIO_4_15 = IOMUX_PAD(0x05EC, 0x021C, 5, 0x0000, 0, 0),
- MX6Q_PAD_KEY_ROW4__MMDC_DEBUG_50 = IOMUX_PAD(0x05EC, 0x021C, 6, 0x0000, 0, 0),
- MX6Q_PAD_KEY_ROW4__PL301_PER1_HADR_8 = IOMUX_PAD(0x05EC, 0x021C, 7, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_0__CCM_CLKO = IOMUX_PAD(0x05F0, 0x0220, 0, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_0__KPP_COL_5 = IOMUX_PAD(0x05F0, 0x0220, 2, 0x08E8, 0, 0),
- MX6Q_PAD_GPIO_0__ASRC_ASRC_EXT_CLK = IOMUX_PAD(0x05F0, 0x0220, 3, 0x07B0, 1, 0),
- MX6Q_PAD_GPIO_0__EPIT1_EPITO = IOMUX_PAD(0x05F0, 0x0220, 4, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_0__GPIO_1_0 = IOMUX_PAD(0x05F0, 0x0220, 5, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_0__USBOH3_USBH1_PWR = IOMUX_PAD(0x05F0, 0x0220, 6, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_0__SNVS_HP_WRAP_SNVS_VIO5 = IOMUX_PAD(0x05F0, 0x0220, 7, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_1__ESAI1_SCKR = IOMUX_PAD(0x05F4, 0x0224, 0, 0x086C, 1, 0),
- MX6Q_PAD_GPIO_1__WDOG2_WDOG_B = IOMUX_PAD(0x05F4, 0x0224, 1, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_1__KPP_ROW_5 = IOMUX_PAD(0x05F4, 0x0224, 2, 0x08F4, 0, 0),
- MX6Q_PAD_GPIO_1__PWM2_PWMO = IOMUX_PAD(0x05F4, 0x0224, 4, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_1__GPIO_1_1 = IOMUX_PAD(0x05F4, 0x0224, 5, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_1__USDHC1_CD = IOMUX_PAD(0x05F4, 0x0224, 6, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_1__SRC_TESTER_ACK = IOMUX_PAD(0x05F4, 0x0224, 7, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_9__ESAI1_FSR = IOMUX_PAD(0x05F8, 0x0228, 0, 0x085C, 1, 0),
- MX6Q_PAD_GPIO_9__WDOG1_WDOG_B = IOMUX_PAD(0x05F8, 0x0228, 1, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_9__KPP_COL_6 = IOMUX_PAD(0x05F8, 0x0228, 2, 0x08EC, 0, 0),
- MX6Q_PAD_GPIO_9__CCM_REF_EN_B = IOMUX_PAD(0x05F8, 0x0228, 3, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_9__PWM1_PWMO = IOMUX_PAD(0x05F8, 0x0228, 4, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_9__GPIO_1_9 = IOMUX_PAD(0x05F8, 0x0228, 5, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_9__USDHC1_WP = IOMUX_PAD(0x05F8, 0x0228, 6, 0x094C, 1, 0),
- MX6Q_PAD_GPIO_9__SRC_EARLY_RST = IOMUX_PAD(0x05F8, 0x0228, 7, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_3__ESAI1_HCKR = IOMUX_PAD(0x05FC, 0x022C, 0, 0x0864, 1, 0),
- MX6Q_PAD_GPIO_3__OBSERVE_MUX_INT_OUT0 = IOMUX_PAD(0x05FC, 0x022C, 1, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_3__I2C3_SCL = IOMUX_PAD(0x05FC, 0x022C, 18, 0x08A8, 1, 0),
- MX6Q_PAD_GPIO_3__ANATOP_24M_OUT = IOMUX_PAD(0x05FC, 0x022C, 3, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_3__CCM_CLKO2 = IOMUX_PAD(0x05FC, 0x022C, 4, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_3__GPIO_1_3 = IOMUX_PAD(0x05FC, 0x022C, 5, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_3__USBOH3_USBH1_OC = IOMUX_PAD(0x05FC, 0x022C, 6, 0x0948, 1, 0),
- MX6Q_PAD_GPIO_3__MLB_MLBCLK = IOMUX_PAD(0x05FC, 0x022C, 7, 0x0900, 1, 0),
- MX6Q_PAD_GPIO_6__ESAI1_SCKT = IOMUX_PAD(0x0600, 0x0230, 0, 0x0870, 1, 0),
- MX6Q_PAD_GPIO_6__OBSERVE_MUX_INT_OUT1 = IOMUX_PAD(0x0600, 0x0230, 1, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_6__I2C3_SDA = IOMUX_PAD(0x0600, 0x0230, 18, 0x08AC, 1, 0),
- MX6Q_PAD_GPIO_6__CCM_CCM_OUT_0 = IOMUX_PAD(0x0600, 0x0230, 3, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_6__CSU_CSU_INT_DEB = IOMUX_PAD(0x0600, 0x0230, 4, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_6__GPIO_1_6 = IOMUX_PAD(0x0600, 0x0230, 5, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_6__USDHC2_LCTL = IOMUX_PAD(0x0600, 0x0230, 6, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_6__MLB_MLBSIG = IOMUX_PAD(0x0600, 0x0230, 7, 0x0908, 1, 0),
- MX6Q_PAD_GPIO_2__ESAI1_FST = IOMUX_PAD(0x0604, 0x0234, 0, 0x0860, 1, 0),
- MX6Q_PAD_GPIO_2__OBSERVE_MUX_INT_OUT2 = IOMUX_PAD(0x0604, 0x0234, 1, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_2__KPP_ROW_6 = IOMUX_PAD(0x0604, 0x0234, 2, 0x08F8, 1, 0),
- MX6Q_PAD_GPIO_2__CCM_CCM_OUT_1 = IOMUX_PAD(0x0604, 0x0234, 3, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 = IOMUX_PAD(0x0604, 0x0234, 4, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_2__GPIO_1_2 = IOMUX_PAD(0x0604, 0x0234, 5, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_2__USDHC2_WP = IOMUX_PAD(0x0604, 0x0234, 6, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_2__MLB_MLBDAT = IOMUX_PAD(0x0604, 0x0234, 7, 0x0904, 1, 0),
- MX6Q_PAD_GPIO_4__ESAI1_HCKT = IOMUX_PAD(0x0608, 0x0238, 0, 0x0868, 1, 0),
- MX6Q_PAD_GPIO_4__OBSERVE_MUX_INT_OUT3 = IOMUX_PAD(0x0608, 0x0238, 1, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_4__KPP_COL_7 = IOMUX_PAD(0x0608, 0x0238, 2, 0x08F0, 1, 0),
- MX6Q_PAD_GPIO_4__CCM_CCM_OUT_2 = IOMUX_PAD(0x0608, 0x0238, 3, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 = IOMUX_PAD(0x0608, 0x0238, 4, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_4__GPIO_1_4 = IOMUX_PAD(0x0608, 0x0238, 5, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_4__USDHC2_CD = IOMUX_PAD(0x0608, 0x0238, 6, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_4__OCOTP_CRL_WRAR_FUSE_LA = IOMUX_PAD(0x0608, 0x0238, 7, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_5__ESAI1_TX2_RX3 = IOMUX_PAD(0x060C, 0x023C, 0, 0x087C, 1, 0),
- MX6Q_PAD_GPIO_5__OBSERVE_MUX_INT_OUT4 = IOMUX_PAD(0x060C, 0x023C, 1, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_5__KPP_ROW_7 = IOMUX_PAD(0x060C, 0x023C, 2, 0x08FC, 1, 0),
- MX6Q_PAD_GPIO_5__CCM_CLKO = IOMUX_PAD(0x060C, 0x023C, 3, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 = IOMUX_PAD(0x060C, 0x023C, 4, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_5__GPIO_1_5 = IOMUX_PAD(0x060C, 0x023C, 5, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_5__I2C3_SCL = IOMUX_PAD(0x060C, 0x023C, 22, 0x08A8, 2, 0),
- MX6Q_PAD_GPIO_5__CHEETAH_EVENTI = IOMUX_PAD(0x060C, 0x023C, 7, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_7__ESAI1_TX4_RX1 = IOMUX_PAD(0x0610, 0x0240, 0, 0x0884, 1, 0),
- MX6Q_PAD_GPIO_7__ECSPI5_RDY = IOMUX_PAD(0x0610, 0x0240, 1, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_7__EPIT1_EPITO = IOMUX_PAD(0x0610, 0x0240, 2, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_7__CAN1_TXCAN = IOMUX_PAD(0x0610, 0x0240, 3, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_7__UART2_TXD = IOMUX_PAD(0x0610, 0x0240, 4, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_7__UART2_TXD_RXD = IOMUX_PAD(0x0610, 0x0240, 4, 0x0928, 2, 0),
- MX6Q_PAD_GPIO_7__GPIO_1_7 = IOMUX_PAD(0x0610, 0x0240, 5, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_7__SPDIF_PLOCK = IOMUX_PAD(0x0610, 0x0240, 6, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_7__USBOH3_OTGUSB_HST_MODE = IOMUX_PAD(0x0610, 0x0240, 7, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_8__ESAI1_TX5_RX0 = IOMUX_PAD(0x0614, 0x0244, 0, 0x0888, 1, 0),
- MX6Q_PAD_GPIO_8__ANATOP_ANATOP_32K_OUT = IOMUX_PAD(0x0614, 0x0244, 1, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_8__EPIT2_EPITO = IOMUX_PAD(0x0614, 0x0244, 2, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_8__CAN1_RXCAN = IOMUX_PAD(0x0614, 0x0244, 3, 0x07E4, 1, 0),
- MX6Q_PAD_GPIO_8__UART2_RXD = IOMUX_PAD(0x0614, 0x0244, 4, 0x0928, 3, 0),
- MX6Q_PAD_GPIO_8__GPIO_1_8 = IOMUX_PAD(0x0614, 0x0244, 5, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_8__SPDIF_SRCLK = IOMUX_PAD(0x0614, 0x0244, 6, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_8__USBOH3_OTG_PWRCTL_WAK = IOMUX_PAD(0x0614, 0x0244, 7, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_16__ESAI1_TX3_RX2 = IOMUX_PAD(0x0618, 0x0248, 0, 0x0880, 1, 0),
- MX6Q_PAD_GPIO_16__ENET_1588_EVENT2_IN = IOMUX_PAD(0x0618, 0x0248, 1, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_16__ENET_ETHERNET_REF_OUT = IOMUX_PAD(0x0618, 0x0248, 2, 0x083C, 1, 0),
- MX6Q_PAD_GPIO_16__USDHC1_LCTL = IOMUX_PAD(0x0618, 0x0248, 3, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_16__SPDIF_IN1 = IOMUX_PAD(0x0618, 0x0248, 4, 0x0914, 3, 0),
- MX6Q_PAD_GPIO_16__GPIO_7_11 = IOMUX_PAD(0x0618, 0x0248, 5, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_16__I2C3_SDA = IOMUX_PAD(0x0618, 0x0248, 22, 0x08AC, 2, 0),
- MX6Q_PAD_GPIO_16__SJC_DE_B = IOMUX_PAD(0x0618, 0x0248, 7, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_17__ESAI1_TX0 = IOMUX_PAD(0x061C, 0x024C, 0, 0x0874, 0, 0),
- MX6Q_PAD_GPIO_17__ENET_1588_EVENT3_IN = IOMUX_PAD(0x061C, 0x024C, 1, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_17__CCM_PMIC_RDY = IOMUX_PAD(0x061C, 0x024C, 2, 0x07F0, 1, 0),
- MX6Q_PAD_GPIO_17__SDMA_SDMA_EXT_EVENT_0 = IOMUX_PAD(0x061C, 0x024C, 3, 0x090C, 1, 0),
- MX6Q_PAD_GPIO_17__SPDIF_OUT1 = IOMUX_PAD(0x061C, 0x024C, 4, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_17__GPIO_7_12 = IOMUX_PAD(0x061C, 0x024C, 5, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_17__SJC_JTAG_ACT = IOMUX_PAD(0x061C, 0x024C, 7, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_18__ESAI1_TX1 = IOMUX_PAD(0x0620, 0x0250, 0, 0x0878, 0, 0),
- MX6Q_PAD_GPIO_18__ENET_RX_CLK = IOMUX_PAD(0x0620, 0x0250, 1, 0x0844, 1, 0),
- MX6Q_PAD_GPIO_18__USDHC3_VSELECT = IOMUX_PAD(0x0620, 0x0250, 2, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_18__SDMA_SDMA_EXT_EVENT_1 = IOMUX_PAD(0x0620, 0x0250, 3, 0x0910, 1, 0),
- MX6Q_PAD_GPIO_18__ASRC_ASRC_EXT_CLK = IOMUX_PAD(0x0620, 0x0250, 4, 0x07B0, 2, 0),
- MX6Q_PAD_GPIO_18__GPIO_7_13 = IOMUX_PAD(0x0620, 0x0250, 5, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_18__SNVS_HP_WRA_SNVS_VIO5 = IOMUX_PAD(0x0620, 0x0250, 6, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_18__SRC_SYSTEM_RST = IOMUX_PAD(0x0620, 0x0250, 7, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_19__KPP_COL_5 = IOMUX_PAD(0x0624, 0x0254, 0, 0x08E8, 1, 0),
- MX6Q_PAD_GPIO_19__ENET_1588_EVENT0_OUT = IOMUX_PAD(0x0624, 0x0254, 1, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_19__SPDIF_OUT1 = IOMUX_PAD(0x0624, 0x0254, 2, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_19__CCM_CLKO = IOMUX_PAD(0x0624, 0x0254, 3, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_19__ECSPI1_RDY = IOMUX_PAD(0x0624, 0x0254, 4, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_19__GPIO_4_5 = IOMUX_PAD(0x0624, 0x0254, 5, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_19__ENET_TX_ER = IOMUX_PAD(0x0624, 0x0254, 6, 0x0000, 0, 0),
- MX6Q_PAD_GPIO_19__SRC_INT_BOOT = IOMUX_PAD(0x0624, 0x0254, 7, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK = IOMUX_PAD(0x0628, 0x0258, 0, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_PIXCLK__PCIE_CTRL_MUX_12 = IOMUX_PAD(0x0628, 0x0258, 2, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 = IOMUX_PAD(0x0628, 0x0258, 4, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_PIXCLK__GPIO_5_18 = IOMUX_PAD(0x0628, 0x0258, 5, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_PIXCLK___MMDC_DEBUG_29 = IOMUX_PAD(0x0628, 0x0258, 6, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_PIXCLK__CHEETAH_EVENTO = IOMUX_PAD(0x0628, 0x0258, 7, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC = IOMUX_PAD(0x062C, 0x025C, 0, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_MCLK__PCIE_CTRL_MUX_13 = IOMUX_PAD(0x062C, 0x025C, 2, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_MCLK__CCM_CLKO = IOMUX_PAD(0x062C, 0x025C, 3, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 = IOMUX_PAD(0x062C, 0x025C, 4, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_MCLK__GPIO_5_19 = IOMUX_PAD(0x062C, 0x025C, 5, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_MCLK__MMDC_MMDC_DEBUG_30 = IOMUX_PAD(0x062C, 0x025C, 6, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_MCLK__CHEETAH_TRCTL = IOMUX_PAD(0x062C, 0x025C, 7, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DATA_EN__IPU1_CSI0_DA_EN = IOMUX_PAD(0x0630, 0x0260, 0, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DATA_EN__WEIM_WEIM_D_0 = IOMUX_PAD(0x0630, 0x0260, 1, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DATA_EN__PCIE_CTRL_MUX_14 = IOMUX_PAD(0x0630, 0x0260, 2, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 = IOMUX_PAD(0x0630, 0x0260, 4, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DATA_EN__GPIO_5_20 = IOMUX_PAD(0x0630, 0x0260, 5, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DATA_EN__MMDC_DEBUG_31 = IOMUX_PAD(0x0630, 0x0260, 6, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DATA_EN__CHEETAH_TRCLK = IOMUX_PAD(0x0630, 0x0260, 7, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC = IOMUX_PAD(0x0634, 0x0264, 0, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_VSYNC__WEIM_WEIM_D_1 = IOMUX_PAD(0x0634, 0x0264, 1, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_VSYNC__PCIE_CTRL_MUX_15 = IOMUX_PAD(0x0634, 0x0264, 2, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 = IOMUX_PAD(0x0634, 0x0264, 4, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_VSYNC__GPIO_5_21 = IOMUX_PAD(0x0634, 0x0264, 5, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_VSYNC__MMDC_DEBUG_32 = IOMUX_PAD(0x0634, 0x0264, 6, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_VSYNC__CHEETAH_TRACE_0 = IOMUX_PAD(0x0634, 0x0264, 7, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT4__IPU1_CSI0_D_4 = IOMUX_PAD(0x0638, 0x0268, 0, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT4__WEIM_WEIM_D_2 = IOMUX_PAD(0x0638, 0x0268, 1, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT4__ECSPI1_SCLK = IOMUX_PAD(0x0638, 0x0268, 2, 0x07F4, 3, 0),
- MX6Q_PAD_CSI0_DAT4__KPP_COL_5 = IOMUX_PAD(0x0638, 0x0268, 3, 0x08E8, 2, 0),
- MX6Q_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC = IOMUX_PAD(0x0638, 0x0268, 4, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT4__GPIO_5_22 = IOMUX_PAD(0x0638, 0x0268, 5, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT4__MMDC_DEBUG_43 = IOMUX_PAD(0x0638, 0x0268, 6, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT4__CHEETAH_TRACE_1 = IOMUX_PAD(0x0638, 0x0268, 7, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT5__IPU1_CSI0_D_5 = IOMUX_PAD(0x063C, 0x026C, 0, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT5__WEIM_WEIM_D_3 = IOMUX_PAD(0x063C, 0x026C, 1, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT5__ECSPI1_MOSI = IOMUX_PAD(0x063C, 0x026C, 2, 0x07FC, 3, 0),
- MX6Q_PAD_CSI0_DAT5__KPP_ROW_5 = IOMUX_PAD(0x063C, 0x026C, 3, 0x08F4, 1, 0),
- MX6Q_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD = IOMUX_PAD(0x063C, 0x026C, 4, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT5__GPIO_5_23 = IOMUX_PAD(0x063C, 0x026C, 5, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT5__MMDC_MMDC_DEBUG_44 = IOMUX_PAD(0x063C, 0x026C, 6, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT5__CHEETAH_TRACE_2 = IOMUX_PAD(0x063C, 0x026C, 7, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT6__IPU1_CSI0_D_6 = IOMUX_PAD(0x0640, 0x0270, 0, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT6__WEIM_WEIM_D_4 = IOMUX_PAD(0x0640, 0x0270, 1, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT6__ECSPI1_MISO = IOMUX_PAD(0x0640, 0x0270, 2, 0x07F8, 3, 0),
- MX6Q_PAD_CSI0_DAT6__KPP_COL_6 = IOMUX_PAD(0x0640, 0x0270, 3, 0x08EC, 1, 0),
- MX6Q_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS = IOMUX_PAD(0x0640, 0x0270, 4, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT6__GPIO_5_24 = IOMUX_PAD(0x0640, 0x0270, 5, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT6__MMDC_MMDC_DEBUG_45 = IOMUX_PAD(0x0640, 0x0270, 6, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT6__CHEETAH_TRACE_3 = IOMUX_PAD(0x0640, 0x0270, 7, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT7__IPU1_CSI0_D_7 = IOMUX_PAD(0x0644, 0x0274, 0, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT7__WEIM_WEIM_D_5 = IOMUX_PAD(0x0644, 0x0274, 1, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT7__ECSPI1_SS0 = IOMUX_PAD(0x0644, 0x0274, 2, 0x0800, 3, 0),
- MX6Q_PAD_CSI0_DAT7__KPP_ROW_6 = IOMUX_PAD(0x0644, 0x0274, 3, 0x08F8, 2, 0),
- MX6Q_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD = IOMUX_PAD(0x0644, 0x0274, 4, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT7__GPIO_5_25 = IOMUX_PAD(0x0644, 0x0274, 5, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT7__MMDC_MMDC_DEBUG_46 = IOMUX_PAD(0x0644, 0x0274, 6, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT7__CHEETAH_TRACE_4 = IOMUX_PAD(0x0644, 0x0274, 7, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT8__IPU1_CSI0_D_8 = IOMUX_PAD(0x0648, 0x0278, 0, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT8__WEIM_WEIM_D_6 = IOMUX_PAD(0x0648, 0x0278, 1, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT8__ECSPI2_SCLK = IOMUX_PAD(0x0648, 0x0278, 2, 0x0810, 2, 0),
- MX6Q_PAD_CSI0_DAT8__KPP_COL_7 = IOMUX_PAD(0x0648, 0x0278, 3, 0x08F0, 2, 0),
- MX6Q_PAD_CSI0_DAT8__I2C1_SDA = IOMUX_PAD(0x0648, 0x0278, 20, 0x089C, 1, 0),
- MX6Q_PAD_CSI0_DAT8__GPIO_5_26 = IOMUX_PAD(0x0648, 0x0278, 5, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT8__MMDC_MMDC_DEBUG_47 = IOMUX_PAD(0x0648, 0x0278, 6, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT8__CHEETAH_TRACE_5 = IOMUX_PAD(0x0648, 0x0278, 7, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT9__IPU1_CSI0_D_9 = IOMUX_PAD(0x064C, 0x027C, 0, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT9__WEIM_WEIM_D_7 = IOMUX_PAD(0x064C, 0x027C, 1, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT9__ECSPI2_MOSI = IOMUX_PAD(0x064C, 0x027C, 2, 0x0818, 2, 0),
- MX6Q_PAD_CSI0_DAT9__KPP_ROW_7 = IOMUX_PAD(0x064C, 0x027C, 3, 0x08FC, 2, 0),
- MX6Q_PAD_CSI0_DAT9__I2C1_SCL = IOMUX_PAD(0x064C, 0x027C, 20, 0x0898, 1, 0),
- MX6Q_PAD_CSI0_DAT9__GPIO_5_27 = IOMUX_PAD(0x064C, 0x027C, 5, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT9__MMDC_MMDC_DEBUG_48 = IOMUX_PAD(0x064C, 0x027C, 6, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT9__CHEETAH_TRACE_6 = IOMUX_PAD(0x064C, 0x027C, 7, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT10__IPU1_CSI0_D_10 = IOMUX_PAD(0x0650, 0x0280, 0, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC = IOMUX_PAD(0x0650, 0x0280, 1, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT10__ECSPI2_MISO = IOMUX_PAD(0x0650, 0x0280, 2, 0x0814, 2, 0),
- MX6Q_PAD_CSI0_DAT10__UART1_TXD = IOMUX_PAD(0x0650, 0x0280, 3, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT10__UART1_TXD_RXD = IOMUX_PAD(0x0650, 0x0280, 3, 0x0920, 0, 0),
- MX6Q_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 = IOMUX_PAD(0x0650, 0x0280, 4, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT10__GPIO_5_28 = IOMUX_PAD(0x0650, 0x0280, 5, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT10__MMDC_MMDC_DEBUG_33 = IOMUX_PAD(0x0650, 0x0280, 6, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT10__CHEETAH_TRACE_7 = IOMUX_PAD(0x0650, 0x0280, 7, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT11__IPU1_CSI0_D_11 = IOMUX_PAD(0x0654, 0x0284, 0, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS = IOMUX_PAD(0x0654, 0x0284, 1, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT11__ECSPI2_SS0 = IOMUX_PAD(0x0654, 0x0284, 2, 0x081C, 2, 0),
- MX6Q_PAD_CSI0_DAT11__UART1_RXD = IOMUX_PAD(0x0654, 0x0284, 3, 0x0920, 1, 0),
- MX6Q_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 = IOMUX_PAD(0x0654, 0x0284, 4, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT11__GPIO_5_29 = IOMUX_PAD(0x0654, 0x0284, 5, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT11__MMDC_MMDC_DEBUG_34 = IOMUX_PAD(0x0654, 0x0284, 6, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT11__CHEETAH_TRACE_8 = IOMUX_PAD(0x0654, 0x0284, 7, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT12__IPU1_CSI0_D_12 = IOMUX_PAD(0x0658, 0x0288, 0, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT12__WEIM_WEIM_D_8 = IOMUX_PAD(0x0658, 0x0288, 1, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT12__PCIE_CTRL_MUX_16 = IOMUX_PAD(0x0658, 0x0288, 2, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT12__UART4_TXD = IOMUX_PAD(0x0658, 0x0288, 3, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT12__UART4_TXD_RXD = IOMUX_PAD(0x0658, 0x0288, 3, 0x0938, 2, 0),
- MX6Q_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 = IOMUX_PAD(0x0658, 0x0288, 4, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT12__GPIO_5_30 = IOMUX_PAD(0x0658, 0x0288, 5, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT12__MMDC_MMDC_DEBUG_35 = IOMUX_PAD(0x0658, 0x0288, 6, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT12__CHEETAH_TRACE_9 = IOMUX_PAD(0x0658, 0x0288, 7, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT13__IPU1_CSI0_D_13 = IOMUX_PAD(0x065C, 0x028C, 0, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT13__WEIM_WEIM_D_9 = IOMUX_PAD(0x065C, 0x028C, 1, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT13__PCIE_CTRL_MUX_17 = IOMUX_PAD(0x065C, 0x028C, 2, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT13__UART4_RXD = IOMUX_PAD(0x065C, 0x028C, 3, 0x0938, 3, 0),
- MX6Q_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 = IOMUX_PAD(0x065C, 0x028C, 4, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT13__GPIO_5_31 = IOMUX_PAD(0x065C, 0x028C, 5, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT13__MMDC_MMDC_DEBUG_36 = IOMUX_PAD(0x065C, 0x028C, 6, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT13__CHEETAH_TRACE_10 = IOMUX_PAD(0x065C, 0x028C, 7, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT14__IPU1_CSI0_D_14 = IOMUX_PAD(0x0660, 0x0290, 0, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT14__WEIM_WEIM_D_10 = IOMUX_PAD(0x0660, 0x0290, 1, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT14__PCIE_CTRL_MUX_18 = IOMUX_PAD(0x0660, 0x0290, 2, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT14__UART5_TXD = IOMUX_PAD(0x0660, 0x0290, 3, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT14__UART5_TXD_RXD = IOMUX_PAD(0x0660, 0x0290, 3, 0x0940, 2, 0),
- MX6Q_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 = IOMUX_PAD(0x0660, 0x0290, 4, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT14__GPIO_6_0 = IOMUX_PAD(0x0660, 0x0290, 5, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT14__MMDC_MMDC_DEBUG_37 = IOMUX_PAD(0x0660, 0x0290, 6, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT14__CHEETAH_TRACE_11 = IOMUX_PAD(0x0660, 0x0290, 7, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT15__IPU1_CSI0_D_15 = IOMUX_PAD(0x0664, 0x0294, 0, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT15__WEIM_WEIM_D_11 = IOMUX_PAD(0x0664, 0x0294, 1, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT15__PCIE_CTRL_MUX_19 = IOMUX_PAD(0x0664, 0x0294, 2, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT15__UART5_RXD = IOMUX_PAD(0x0664, 0x0294, 3, 0x0940, 3, 0),
- MX6Q_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 = IOMUX_PAD(0x0664, 0x0294, 4, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT15__GPIO_6_1 = IOMUX_PAD(0x0664, 0x0294, 5, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT15__MMDC_MMDC_DEBUG_38 = IOMUX_PAD(0x0664, 0x0294, 6, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT15__CHEETAH_TRACE_12 = IOMUX_PAD(0x0664, 0x0294, 7, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT16__IPU1_CSI0_D_16 = IOMUX_PAD(0x0668, 0x0298, 0, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT16__WEIM_WEIM_D_12 = IOMUX_PAD(0x0668, 0x0298, 1, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT16__PCIE_CTRL_MUX_20 = IOMUX_PAD(0x0668, 0x0298, 2, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT16__UART4_CTS = IOMUX_PAD(0x0668, 0x0298, 3, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT16__UART4_RTS = IOMUX_PAD(0x0668, 0x0298, 3, 0x0934, 0, 0),
- MX6Q_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 = IOMUX_PAD(0x0668, 0x0298, 4, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT16__GPIO_6_2 = IOMUX_PAD(0x0668, 0x0298, 5, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT16__MMDC_MMDC_DEBUG_39 = IOMUX_PAD(0x0668, 0x0298, 6, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT16__CHEETAH_TRACE_13 = IOMUX_PAD(0x0668, 0x0298, 7, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT17__IPU1_CSI0_D_17 = IOMUX_PAD(0x066C, 0x029C, 0, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT17__WEIM_WEIM_D_13 = IOMUX_PAD(0x066C, 0x029C, 1, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT17__PCIE_CTRL_MUX_21 = IOMUX_PAD(0x066C, 0x029C, 2, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT17__UART4_CTS = IOMUX_PAD(0x066C, 0x029C, 3, 0x0934, 1, 0),
- MX6Q_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 = IOMUX_PAD(0x066C, 0x029C, 4, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT17__GPIO_6_3 = IOMUX_PAD(0x066C, 0x029C, 5, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT17__MMDC_MMDC_DEBUG_40 = IOMUX_PAD(0x066C, 0x029C, 6, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT17__CHEETAH_TRACE_14 = IOMUX_PAD(0x066C, 0x029C, 7, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT18__IPU1_CSI0_D_18 = IOMUX_PAD(0x0670, 0x02A0, 0, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT18__WEIM_WEIM_D_14 = IOMUX_PAD(0x0670, 0x02A0, 1, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT18__PCIE_CTRL_MUX_22 = IOMUX_PAD(0x0670, 0x02A0, 2, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT18__UART5_CTS = IOMUX_PAD(0x0670, 0x02A0, 3, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT18__UART5_RTS = IOMUX_PAD(0x0670, 0x02A0, 3, 0x093C, 2, 0),
- MX6Q_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 = IOMUX_PAD(0x0670, 0x02A0, 4, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT18__GPIO_6_4 = IOMUX_PAD(0x0670, 0x02A0, 5, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT18__MMDC_MMDC_DEBUG_41 = IOMUX_PAD(0x0670, 0x02A0, 6, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT18__CHEETAH_TRACE_15 = IOMUX_PAD(0x0670, 0x02A0, 7, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT19__IPU1_CSI0_D_19 = IOMUX_PAD(0x0674, 0x02A4, 0, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT19__WEIM_WEIM_D_15 = IOMUX_PAD(0x0674, 0x02A4, 1, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT19__PCIE_CTRL_MUX_23 = IOMUX_PAD(0x0674, 0x02A4, 2, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT19__UART5_CTS = IOMUX_PAD(0x0674, 0x02A4, 3, 0x093C, 3, 0),
- MX6Q_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 = IOMUX_PAD(0x0674, 0x02A4, 4, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT19__GPIO_6_5 = IOMUX_PAD(0x0674, 0x02A4, 5, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT19__MMDC_MMDC_DEBUG_42 = IOMUX_PAD(0x0674, 0x02A4, 6, 0x0000, 0, 0),
- MX6Q_PAD_CSI0_DAT19__ANATOP_TESTO_9 = IOMUX_PAD(0x0674, 0x02A4, 7, 0x0000, 0, 0),
- MX6Q_PAD_JTAG_TMS__SJC_TMS = IOMUX_PAD(0x0678, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_JTAG_MOD__SJC_MOD = IOMUX_PAD(0x067C, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_JTAG_TRSTB__SJC_TRSTB = IOMUX_PAD(0x0680, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_JTAG_TDI__SJC_TDI = IOMUX_PAD(0x0684, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_JTAG_TCK__SJC_TCK = IOMUX_PAD(0x0688, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_JTAG_TDO__SJC_TDO = IOMUX_PAD(0x068C, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_TAMPER__SNVS_LP_WRAP_SNVS_TD1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_PMIC_ON_REQ__SNVS_LPWRAP_WKALM = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_PMIC_STBY_REQ__CCM_PMIC_STBYRQ = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_POR_B__SRC_POR_B = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_BOOT_MODE1__SRC_BOOT_MODE_1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_RESET_IN_B__SRC_RESET_B = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_BOOT_MODE0__SRC_BOOT_MODE_0 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_TEST_MODE__TCU_TEST_MODE = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 = IOMUX_PAD(0x0690, 0x02A8, 0, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT7__UART1_TXD = IOMUX_PAD(0x0690, 0x02A8, 1, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT7__UART1_TXD_RXD = IOMUX_PAD(0x0690, 0x02A8, 1, 0x0920, 2, 0),
- MX6Q_PAD_SD3_DAT7__PCIE_CTRL_MUX_24 = IOMUX_PAD(0x0690, 0x02A8, 2, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT7__USBOH3_UH3_DFD_OUT_0 = IOMUX_PAD(0x0690, 0x02A8, 3, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT7__USBOH3_UH2_DFD_OUT_0 = IOMUX_PAD(0x0690, 0x02A8, 4, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT7__GPIO_6_17 = IOMUX_PAD(0x0690, 0x02A8, 5, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT7__MIPI_CORE_DPHY_IN_12 = IOMUX_PAD(0x0690, 0x02A8, 6, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT7__USBPHY2_CLK20DIV = IOMUX_PAD(0x0690, 0x02A8, 7, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 = IOMUX_PAD(0x0694, 0x02AC, 0, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT6__UART1_RXD = IOMUX_PAD(0x0694, 0x02AC, 1, 0x0920, 3, 0),
- MX6Q_PAD_SD3_DAT6__PCIE_CTRL_MUX_25 = IOMUX_PAD(0x0694, 0x02AC, 2, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT6__USBOH3_UH3_DFD_OUT_1 = IOMUX_PAD(0x0694, 0x02AC, 3, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT6__USBOH3_UH2_DFD_OUT_1 = IOMUX_PAD(0x0694, 0x02AC, 4, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT6__GPIO_6_18 = IOMUX_PAD(0x0694, 0x02AC, 5, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT6__MIPI_CORE_DPHY_IN_13 = IOMUX_PAD(0x0694, 0x02AC, 6, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT6__ANATOP_TESTO_10 = IOMUX_PAD(0x0694, 0x02AC, 7, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 = IOMUX_PAD(0x0698, 0x02B0, 0, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT5__UART2_TXD = IOMUX_PAD(0x0698, 0x02B0, 1, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT5__UART2_TXD_RXD = IOMUX_PAD(0x0698, 0x02B0, 1, 0x0928, 4, 0),
- MX6Q_PAD_SD3_DAT5__PCIE_CTRL_MUX_26 = IOMUX_PAD(0x0698, 0x02B0, 2, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT5__USBOH3_UH3_DFD_OUT_2 = IOMUX_PAD(0x0698, 0x02B0, 3, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT5__USBOH3_UH2_DFD_OUT_2 = IOMUX_PAD(0x0698, 0x02B0, 4, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT5__GPIO_7_0 = IOMUX_PAD(0x0698, 0x02B0, 5, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT5__MIPI_CORE_DPHY_IN_14 = IOMUX_PAD(0x0698, 0x02B0, 6, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT5__ANATOP_TESTO_11 = IOMUX_PAD(0x0698, 0x02B0, 7, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 = IOMUX_PAD(0x069C, 0x02B4, 0, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT4__UART2_RXD = IOMUX_PAD(0x069C, 0x02B4, 1, 0x0928, 5, 0),
- MX6Q_PAD_SD3_DAT4__PCIE_CTRL_MUX_27 = IOMUX_PAD(0x069C, 0x02B4, 2, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT4__USBOH3_UH3_DFD_OUT_3 = IOMUX_PAD(0x069C, 0x02B4, 3, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT4__USBOH3_UH2_DFD_OUT_3 = IOMUX_PAD(0x069C, 0x02B4, 4, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT4__GPIO_7_1 = IOMUX_PAD(0x069C, 0x02B4, 5, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT4__MIPI_CORE_DPHY_IN_15 = IOMUX_PAD(0x069C, 0x02B4, 6, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT4__ANATOP_TESTO_12 = IOMUX_PAD(0x069C, 0x02B4, 7, 0x0000, 0, 0),
- MX6Q_PAD_SD3_CMD__USDHC3_CMD = IOMUX_PAD(0x06A0, 0x02B8, 16, 0x0000, 0, 0),
- MX6Q_PAD_SD3_CMD__UART2_CTS = IOMUX_PAD(0x06A0, 0x02B8, 1, 0x0924, 2, 0),
- MX6Q_PAD_SD3_CMD__CAN1_TXCAN = IOMUX_PAD(0x06A0, 0x02B8, 2, 0x0000, 0, 0),
- MX6Q_PAD_SD3_CMD__USBOH3_UH3_DFD_OUT_4 = IOMUX_PAD(0x06A0, 0x02B8, 3, 0x0000, 0, 0),
- MX6Q_PAD_SD3_CMD__USBOH3_UH2_DFD_OUT_4 = IOMUX_PAD(0x06A0, 0x02B8, 4, 0x0000, 0, 0),
- MX6Q_PAD_SD3_CMD__GPIO_7_2 = IOMUX_PAD(0x06A0, 0x02B8, 5, 0x0000, 0, 0),
- MX6Q_PAD_SD3_CMD__MIPI_CORE_DPHY_IN_16 = IOMUX_PAD(0x06A0, 0x02B8, 6, 0x0000, 0, 0),
- MX6Q_PAD_SD3_CMD__ANATOP_TESTO_13 = IOMUX_PAD(0x06A0, 0x02B8, 7, 0x0000, 0, 0),
- MX6Q_PAD_SD3_CLK__USDHC3_CLK = IOMUX_PAD(0x06A4, 0x02BC, 0, 0x0000, 0, 0),
- MX6Q_PAD_SD3_CLK__UART2_CTS = IOMUX_PAD(0x06A4, 0x02BC, 1, 0x0000, 0, 0),
- MX6Q_PAD_SD3_CLK__UART2_RTS = IOMUX_PAD(0x06A4, 0x02BC, 1, 0x0924, 3, 0),
- MX6Q_PAD_SD3_CLK__CAN1_RXCAN = IOMUX_PAD(0x06A4, 0x02BC, 2, 0x07E4, 2, 0),
- MX6Q_PAD_SD3_CLK__USBOH3_UH3_DFD_OUT_5 = IOMUX_PAD(0x06A4, 0x02BC, 3, 0x0000, 0, 0),
- MX6Q_PAD_SD3_CLK__USBOH3_UH2_DFD_OUT_5 = IOMUX_PAD(0x06A4, 0x02BC, 4, 0x0000, 0, 0),
- MX6Q_PAD_SD3_CLK__GPIO_7_3 = IOMUX_PAD(0x06A4, 0x02BC, 5, 0x0000, 0, 0),
- MX6Q_PAD_SD3_CLK__MIPI_CORE_DPHY_IN_17 = IOMUX_PAD(0x06A4, 0x02BC, 6, 0x0000, 0, 0),
- MX6Q_PAD_SD3_CLK__ANATOP_TESTO_14 = IOMUX_PAD(0x06A4, 0x02BC, 7, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 = IOMUX_PAD(0x06A8, 0x02C0, 0, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT0__UART1_CTS = IOMUX_PAD(0x06A8, 0x02C0, 1, 0x091C, 2, 0),
- MX6Q_PAD_SD3_DAT0__CAN2_TXCAN = IOMUX_PAD(0x06A8, 0x02C0, 2, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT0__USBOH3_UH3_DFD_OUT_6 = IOMUX_PAD(0x06A8, 0x02C0, 3, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT0__USBOH3_UH2_DFD_OUT_6 = IOMUX_PAD(0x06A8, 0x02C0, 4, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT0__GPIO_7_4 = IOMUX_PAD(0x06A8, 0x02C0, 5, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT0__MIPI_CORE_DPHY_IN_18 = IOMUX_PAD(0x06A8, 0x02C0, 6, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT0__ANATOP_TESTO_15 = IOMUX_PAD(0x06A8, 0x02C0, 7, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 = IOMUX_PAD(0x06AC, 0x02C4, 0, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT1__UART1_CTS = IOMUX_PAD(0x06AC, 0x02C4, 1, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT1__UART1_RTS = IOMUX_PAD(0x06AC, 0x02C4, 1, 0x091C, 3, 0),
- MX6Q_PAD_SD3_DAT1__CAN2_RXCAN = IOMUX_PAD(0x06AC, 0x02C4, 2, 0x07E8, 1, 0),
- MX6Q_PAD_SD3_DAT1__USBOH3_UH3_DFD_OUT_7 = IOMUX_PAD(0x06AC, 0x02C4, 3, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT1__USBOH3_UH2_DFD_OUT_7 = IOMUX_PAD(0x06AC, 0x02C4, 4, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT1__GPIO_7_5 = IOMUX_PAD(0x06AC, 0x02C4, 5, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT1__MIPI_CORE_DPHY_IN_19 = IOMUX_PAD(0x06AC, 0x02C4, 6, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT1__ANATOP_TESTI_0 = IOMUX_PAD(0x06AC, 0x02C4, 7, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 = IOMUX_PAD(0x06B0, 0x02C8, 0, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT2__PCIE_CTRL_MUX_28 = IOMUX_PAD(0x06B0, 0x02C8, 2, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT2__USBOH3_UH3_DFD_OUT_8 = IOMUX_PAD(0x06B0, 0x02C8, 3, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT2__USBOH3_UH2_DFD_OUT_8 = IOMUX_PAD(0x06B0, 0x02C8, 4, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT2__GPIO_7_6 = IOMUX_PAD(0x06B0, 0x02C8, 5, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT2__MIPI_CORE_DPHY_IN_20 = IOMUX_PAD(0x06B0, 0x02C8, 6, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT2__ANATOP_TESTI_1 = IOMUX_PAD(0x06B0, 0x02C8, 7, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 = IOMUX_PAD(0x06B4, 0x02CC, 0, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT3__UART3_CTS = IOMUX_PAD(0x06B4, 0x02CC, 1, 0x092C, 4, 0),
- MX6Q_PAD_SD3_DAT3__PCIE_CTRL_MUX_29 = IOMUX_PAD(0x06B4, 0x02CC, 2, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT3__USBOH3_UH3_DFD_OUT_9 = IOMUX_PAD(0x06B4, 0x02CC, 3, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT3__USBOH3_UH2_DFD_OUT_9 = IOMUX_PAD(0x06B4, 0x02CC, 4, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT3__GPIO_7_7 = IOMUX_PAD(0x06B4, 0x02CC, 5, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT3__MIPI_CORE_DPHY_IN_21 = IOMUX_PAD(0x06B4, 0x02CC, 6, 0x0000, 0, 0),
- MX6Q_PAD_SD3_DAT3__ANATOP_TESTI_2 = IOMUX_PAD(0x06B4, 0x02CC, 7, 0x0000, 0, 0),
- MX6Q_PAD_SD3_RST__USDHC3_RST = IOMUX_PAD(0x06B8, 0x02D0, 0, 0x0000, 0, 0),
- MX6Q_PAD_SD3_RST__UART3_CTS = IOMUX_PAD(0x06B8, 0x02D0, 1, 0x0000, 0, 0),
- MX6Q_PAD_SD3_RST__UART3_RTS = IOMUX_PAD(0x06B8, 0x02D0, 1, 0x092C, 5, 0),
- MX6Q_PAD_SD3_RST__PCIE_CTRL_MUX_30 = IOMUX_PAD(0x06B8, 0x02D0, 2, 0x0000, 0, 0),
- MX6Q_PAD_SD3_RST__USBOH3_UH3_DFD_OUT_10 = IOMUX_PAD(0x06B8, 0x02D0, 3, 0x0000, 0, 0),
- MX6Q_PAD_SD3_RST__USBOH3_UH2_DFD_OUT_10 = IOMUX_PAD(0x06B8, 0x02D0, 4, 0x0000, 0, 0),
- MX6Q_PAD_SD3_RST__GPIO_7_8 = IOMUX_PAD(0x06B8, 0x02D0, 5, 0x0000, 0, 0),
- MX6Q_PAD_SD3_RST__MIPI_CORE_DPHY_IN_22 = IOMUX_PAD(0x06B8, 0x02D0, 6, 0x0000, 0, 0),
- MX6Q_PAD_SD3_RST__ANATOP_ANATOP_TESTI_3 = IOMUX_PAD(0x06B8, 0x02D0, 7, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_CLE__RAWNAND_CLE = IOMUX_PAD(0x06BC, 0x02D4, 0, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_CLE__IPU2_SISG_4 = IOMUX_PAD(0x06BC, 0x02D4, 1, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_CLE__PCIE_CTRL_MUX_31 = IOMUX_PAD(0x06BC, 0x02D4, 2, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_CLE__USBOH3_UH3_DFD_OT11 = IOMUX_PAD(0x06BC, 0x02D4, 3, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_CLE__USBOH3_UH2_DFD_OT11 = IOMUX_PAD(0x06BC, 0x02D4, 4, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_CLE__GPIO_6_7 = IOMUX_PAD(0x06BC, 0x02D4, 5, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_CLE__MIPI_CORE_DPHY_IN23 = IOMUX_PAD(0x06BC, 0x02D4, 6, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_CLE__TPSMP_HTRANS_0 = IOMUX_PAD(0x06BC, 0x02D4, 7, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_ALE__RAWNAND_ALE = IOMUX_PAD(0x06C0, 0x02D8, 0, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_ALE__USDHC4_RST = IOMUX_PAD(0x06C0, 0x02D8, 1, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_ALE__PCIE_CTRL_MUX_0 = IOMUX_PAD(0x06C0, 0x02D8, 2, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_ALE__USBOH3_UH3_DFD_OT12 = IOMUX_PAD(0x06C0, 0x02D8, 3, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_ALE__USBOH3_UH2_DFD_OT12 = IOMUX_PAD(0x06C0, 0x02D8, 4, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_ALE__GPIO_6_8 = IOMUX_PAD(0x06C0, 0x02D8, 5, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_ALE__MIPI_CR_DPHY_IN_24 = IOMUX_PAD(0x06C0, 0x02D8, 6, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_ALE__TPSMP_HTRANS_1 = IOMUX_PAD(0x06C0, 0x02D8, 7, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN = IOMUX_PAD(0x06C4, 0x02DC, 0, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_WP_B__IPU2_SISG_5 = IOMUX_PAD(0x06C4, 0x02DC, 1, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_WP_B__PCIE_CTRL__MUX_1 = IOMUX_PAD(0x06C4, 0x02DC, 2, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_WP_B__USBOH3_UH3_DFDOT13 = IOMUX_PAD(0x06C4, 0x02DC, 3, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_WP_B__USBOH3_UH2_DFDOT13 = IOMUX_PAD(0x06C4, 0x02DC, 4, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_WP_B__GPIO_6_9 = IOMUX_PAD(0x06C4, 0x02DC, 5, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_WP_B__MIPI_CR_DPHY_OUT32 = IOMUX_PAD(0x06C4, 0x02DC, 6, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_WP_B__PL301_PER1_HSIZE_0 = IOMUX_PAD(0x06C4, 0x02DC, 7, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 = IOMUX_PAD(0x06C8, 0x02E0, 0, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_RB0__IPU2_DI0_PIN1 = IOMUX_PAD(0x06C8, 0x02E0, 1, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_RB0__PCIE_CTRL_MUX_2 = IOMUX_PAD(0x06C8, 0x02E0, 2, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_RB0__USBOH3_UH3_DFD_OT14 = IOMUX_PAD(0x06C8, 0x02E0, 3, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_RB0__USBOH3_UH2_DFD_OT14 = IOMUX_PAD(0x06C8, 0x02E0, 4, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_RB0__GPIO_6_10 = IOMUX_PAD(0x06C8, 0x02E0, 5, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_RB0__MIPI_CR_DPHY_OUT_33 = IOMUX_PAD(0x06C8, 0x02E0, 6, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_RB0__PL301_PER1_HSIZE_1 = IOMUX_PAD(0x06C8, 0x02E0, 7, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N = IOMUX_PAD(0x06CC, 0x02E4, 0, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_CS0__USBOH3_UH3_DFD_OT15 = IOMUX_PAD(0x06CC, 0x02E4, 3, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_CS0__USBOH3_UH2_DFD_OT15 = IOMUX_PAD(0x06CC, 0x02E4, 4, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_CS0__GPIO_6_11 = IOMUX_PAD(0x06CC, 0x02E4, 5, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_CS0__PL301_PER1_HSIZE_2 = IOMUX_PAD(0x06CC, 0x02E4, 7, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N = IOMUX_PAD(0x06D0, 0x02E8, 0, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_CS1__USDHC4_VSELECT = IOMUX_PAD(0x06D0, 0x02E8, 1, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_CS1__USDHC3_VSELECT = IOMUX_PAD(0x06D0, 0x02E8, 2, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_CS1__PCIE_CTRL_MUX_3 = IOMUX_PAD(0x06D0, 0x02E8, 4, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_CS1__GPIO_6_14 = IOMUX_PAD(0x06D0, 0x02E8, 5, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_CS1__PL301_PER1_HRDYOUT = IOMUX_PAD(0x06D0, 0x02E8, 7, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N = IOMUX_PAD(0x06D4, 0x02EC, 0, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_CS2__IPU1_SISG_0 = IOMUX_PAD(0x06D4, 0x02EC, 1, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_CS2__ESAI1_TX0 = IOMUX_PAD(0x06D4, 0x02EC, 2, 0x0874, 1, 0),
- MX6Q_PAD_NANDF_CS2__WEIM_WEIM_CRE = IOMUX_PAD(0x06D4, 0x02EC, 3, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_CS2__CCM_CLKO2 = IOMUX_PAD(0x06D4, 0x02EC, 4, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_CS2__GPIO_6_15 = IOMUX_PAD(0x06D4, 0x02EC, 5, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_CS2__IPU2_SISG_0 = IOMUX_PAD(0x06D4, 0x02EC, 6, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N = IOMUX_PAD(0x06D8, 0x02F0, 0, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_CS3__IPU1_SISG_1 = IOMUX_PAD(0x06D8, 0x02F0, 1, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_CS3__ESAI1_TX1 = IOMUX_PAD(0x06D8, 0x02F0, 2, 0x0878, 1, 0),
- MX6Q_PAD_NANDF_CS3__WEIM_WEIM_A_26 = IOMUX_PAD(0x06D8, 0x02F0, 3, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_CS3__PCIE_CTRL_MUX_4 = IOMUX_PAD(0x06D8, 0x02F0, 4, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_CS3__GPIO_6_16 = IOMUX_PAD(0x06D8, 0x02F0, 5, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_CS3__IPU2_SISG_1 = IOMUX_PAD(0x06D8, 0x02F0, 6, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_CS3__TPSMP_CLK = IOMUX_PAD(0x06D8, 0x02F0, 7, 0x0000, 0, 0),
- MX6Q_PAD_SD4_CMD__USDHC4_CMD = IOMUX_PAD(0x06DC, 0x02F4, 16, 0x0000, 0, 0),
- MX6Q_PAD_SD4_CMD__RAWNAND_RDN = IOMUX_PAD(0x06DC, 0x02F4, 1, 0x0000, 0, 0),
- MX6Q_PAD_SD4_CMD__UART3_TXD = IOMUX_PAD(0x06DC, 0x02F4, 2, 0x0000, 0, 0),
- MX6Q_PAD_SD4_CMD__UART3_TXD_RXD = IOMUX_PAD(0x06DC, 0x02F4, 2, 0x0930, 2, 0),
- MX6Q_PAD_SD4_CMD__PCIE_CTRL_MUX_5 = IOMUX_PAD(0x06DC, 0x02F4, 4, 0x0000, 0, 0),
- MX6Q_PAD_SD4_CMD__GPIO_7_9 = IOMUX_PAD(0x06DC, 0x02F4, 5, 0x0000, 0, 0),
- MX6Q_PAD_SD4_CMD__TPSMP_HDATA_DIR = IOMUX_PAD(0x06DC, 0x02F4, 7, 0x0000, 0, 0),
- MX6Q_PAD_SD4_CLK__USDHC4_CLK = IOMUX_PAD(0x06E0, 0x02F8, 0, 0x0000, 0, 0),
- MX6Q_PAD_SD4_CLK__RAWNAND_WRN = IOMUX_PAD(0x06E0, 0x02F8, 1, 0x0000, 0, 0),
- MX6Q_PAD_SD4_CLK__UART3_RXD = IOMUX_PAD(0x06E0, 0x02F8, 2, 0x0930, 3, 0),
- MX6Q_PAD_SD4_CLK__PCIE_CTRL_MUX_6 = IOMUX_PAD(0x06E0, 0x02F8, 4, 0x0000, 0, 0),
- MX6Q_PAD_SD4_CLK__GPIO_7_10 = IOMUX_PAD(0x06E0, 0x02F8, 5, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D0__RAWNAND_D0 = IOMUX_PAD(0x06E4, 0x02FC, 0, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D0__USDHC1_DAT4 = IOMUX_PAD(0x06E4, 0x02FC, 1, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D0__GPU3D_GPU_DBG_OUT_0 = IOMUX_PAD(0x06E4, 0x02FC, 2, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D0__USBOH3_UH2_DFD_OUT16 = IOMUX_PAD(0x06E4, 0x02FC, 3, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D0__USBOH3_UH3_DFD_OUT16 = IOMUX_PAD(0x06E4, 0x02FC, 4, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D0__GPIO_2_0 = IOMUX_PAD(0x06E4, 0x02FC, 5, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D0__IPU1_IPU_DIAG_BUS_0 = IOMUX_PAD(0x06E4, 0x02FC, 6, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D0__IPU2_IPU_DIAG_BUS_0 = IOMUX_PAD(0x06E4, 0x02FC, 7, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D1__RAWNAND_D1 = IOMUX_PAD(0x06E8, 0x0300, 0, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D1__USDHC1_DAT5 = IOMUX_PAD(0x06E8, 0x0300, 1, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D1__GPU3D_GPU_DEBUG_OUT1 = IOMUX_PAD(0x06E8, 0x0300, 2, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D1__USBOH3_UH2_DFD_OUT17 = IOMUX_PAD(0x06E8, 0x0300, 3, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D1__USBOH3_UH3_DFD_OUT17 = IOMUX_PAD(0x06E8, 0x0300, 4, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D1__GPIO_2_1 = IOMUX_PAD(0x06E8, 0x0300, 5, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D1__IPU1_IPU_DIAG_BUS_1 = IOMUX_PAD(0x06E8, 0x0300, 6, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D1__IPU2_IPU_DIAG_BUS_1 = IOMUX_PAD(0x06E8, 0x0300, 7, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D2__RAWNAND_D2 = IOMUX_PAD(0x06EC, 0x0304, 0, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D2__USDHC1_DAT6 = IOMUX_PAD(0x06EC, 0x0304, 1, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D2__GPU3D_GPU_DBG_OUT_2 = IOMUX_PAD(0x06EC, 0x0304, 2, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D2__USBOH3_UH2_DFD_OUT18 = IOMUX_PAD(0x06EC, 0x0304, 3, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D2__USBOH3_UH3_DFD_OUT18 = IOMUX_PAD(0x06EC, 0x0304, 4, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D2__GPIO_2_2 = IOMUX_PAD(0x06EC, 0x0304, 5, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D2__IPU1_IPU_DIAG_BUS_2 = IOMUX_PAD(0x06EC, 0x0304, 6, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D2__IPU2_IPU_DIAG_BUS_2 = IOMUX_PAD(0x06EC, 0x0304, 7, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D3__RAWNAND_D3 = IOMUX_PAD(0x06F0, 0x0308, 0, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D3__USDHC1_DAT7 = IOMUX_PAD(0x06F0, 0x0308, 1, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D3__GPU3D_GPU_DBG_OUT_3 = IOMUX_PAD(0x06F0, 0x0308, 2, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D3__USBOH3_UH2_DFD_OUT19 = IOMUX_PAD(0x06F0, 0x0308, 3, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D3__USBOH3_UH3_DFD_OUT19 = IOMUX_PAD(0x06F0, 0x0308, 4, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D3__GPIO_2_3 = IOMUX_PAD(0x06F0, 0x0308, 5, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D3__IPU1_IPU_DIAG_BUS_3 = IOMUX_PAD(0x06F0, 0x0308, 6, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D3__IPU2_IPU_DIAG_BUS_3 = IOMUX_PAD(0x06F0, 0x0308, 7, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D4__RAWNAND_D4 = IOMUX_PAD(0x06F4, 0x030C, 0, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D4__USDHC2_DAT4 = IOMUX_PAD(0x06F4, 0x030C, 1, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D4__GPU3D_GPU_DBG_OUT_4 = IOMUX_PAD(0x06F4, 0x030C, 2, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D4__USBOH3_UH2_DFD_OUT20 = IOMUX_PAD(0x06F4, 0x030C, 3, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D4__USBOH3_UH3_DFD_OUT20 = IOMUX_PAD(0x06F4, 0x030C, 4, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D4__GPIO_2_4 = IOMUX_PAD(0x06F4, 0x030C, 5, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D4__IPU1_IPU_DIAG_BUS_4 = IOMUX_PAD(0x06F4, 0x030C, 6, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D4__IPU2_IPU_DIAG_BUS_4 = IOMUX_PAD(0x06F4, 0x030C, 7, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D5__RAWNAND_D5 = IOMUX_PAD(0x06F8, 0x0310, 0, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D5__USDHC2_DAT5 = IOMUX_PAD(0x06F8, 0x0310, 1, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D5__GPU3D_GPU_DBG_OUT_5 = IOMUX_PAD(0x06F8, 0x0310, 2, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D5__USBOH3_UH2_DFD_OUT21 = IOMUX_PAD(0x06F8, 0x0310, 3, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D5__USBOH3_UH3_DFD_OUT21 = IOMUX_PAD(0x06F8, 0x0310, 4, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D5__GPIO_2_5 = IOMUX_PAD(0x06F8, 0x0310, 5, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D5__IPU1_IPU_DIAG_BUS_5 = IOMUX_PAD(0x06F8, 0x0310, 6, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D5__IPU2_IPU_DIAG_BUS_5 = IOMUX_PAD(0x06F8, 0x0310, 7, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D6__RAWNAND_D6 = IOMUX_PAD(0x06FC, 0x0314, 0, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D6__USDHC2_DAT6 = IOMUX_PAD(0x06FC, 0x0314, 1, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D6__GPU3D_GPU_DBG_OUT_6 = IOMUX_PAD(0x06FC, 0x0314, 2, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D6__USBOH3_UH2_DFD_OUT22 = IOMUX_PAD(0x06FC, 0x0314, 3, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D6__USBOH3_UH3_DFD_OUT22 = IOMUX_PAD(0x06FC, 0x0314, 4, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D6__GPIO_2_6 = IOMUX_PAD(0x06FC, 0x0314, 5, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D6__IPU1_IPU_DIAG_BUS_6 = IOMUX_PAD(0x06FC, 0x0314, 6, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D6__IPU2_IPU_DIAG_BUS_6 = IOMUX_PAD(0x06FC, 0x0314, 7, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D7__RAWNAND_D7 = IOMUX_PAD(0x0700, 0x0318, 0, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D7__USDHC2_DAT7 = IOMUX_PAD(0x0700, 0x0318, 1, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D7__GPU3D_GPU_DBG_OUT_7 = IOMUX_PAD(0x0700, 0x0318, 2, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D7__USBOH3_UH2_DFD_OUT23 = IOMUX_PAD(0x0700, 0x0318, 3, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D7__USBOH3_UH3_DFD_OUT23 = IOMUX_PAD(0x0700, 0x0318, 4, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D7__GPIO_2_7 = IOMUX_PAD(0x0700, 0x0318, 5, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D7__IPU1_IPU_DIAG_BUS_7 = IOMUX_PAD(0x0700, 0x0318, 6, 0x0000, 0, 0),
- MX6Q_PAD_NANDF_D7__IPU2_IPU_DIAG_BUS_7 = IOMUX_PAD(0x0700, 0x0318, 7, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT0__RAWNAND_D8 = IOMUX_PAD(0x0704, 0x031C, 0, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 = IOMUX_PAD(0x0704, 0x031C, 1, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT0__RAWNAND_DQS = IOMUX_PAD(0x0704, 0x031C, 2, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT0__USBOH3_UH2_DFD_OUT24 = IOMUX_PAD(0x0704, 0x031C, 3, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT0__USBOH3_UH3_DFD_OUT24 = IOMUX_PAD(0x0704, 0x031C, 4, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT0__GPIO_2_8 = IOMUX_PAD(0x0704, 0x031C, 5, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT0__IPU1_IPU_DIAG_BUS_8 = IOMUX_PAD(0x0704, 0x031C, 6, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT0__IPU2_IPU_DIAG_BUS_8 = IOMUX_PAD(0x0704, 0x031C, 7, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT1__RAWNAND_D9 = IOMUX_PAD(0x0708, 0x0320, 0, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 = IOMUX_PAD(0x0708, 0x0320, 1, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT1__PWM3_PWMO = IOMUX_PAD(0x0708, 0x0320, 2, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT1__USBOH3_UH2_DFD_OUT25 = IOMUX_PAD(0x0708, 0x0320, 3, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT1__USBOH3_UH3_DFD_OUT25 = IOMUX_PAD(0x0708, 0x0320, 4, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT1__GPIO_2_9 = IOMUX_PAD(0x0708, 0x0320, 5, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT1__IPU1_IPU_DIAG_BUS_9 = IOMUX_PAD(0x0708, 0x0320, 6, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT1__IPU2_IPU_DIAG_BUS_9 = IOMUX_PAD(0x0708, 0x0320, 7, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT2__RAWNAND_D10 = IOMUX_PAD(0x070C, 0x0324, 0, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 = IOMUX_PAD(0x070C, 0x0324, 1, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT2__PWM4_PWMO = IOMUX_PAD(0x070C, 0x0324, 2, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT2__USBOH3_UH2_DFD_OUT26 = IOMUX_PAD(0x070C, 0x0324, 3, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT2__USBOH3_UH3_DFD_OUT26 = IOMUX_PAD(0x070C, 0x0324, 4, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT2__GPIO_2_10 = IOMUX_PAD(0x070C, 0x0324, 5, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT2__IPU1_IPU_DIAG_BUS_10 = IOMUX_PAD(0x070C, 0x0324, 6, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT2__IPU2_IPU_DIAG_BUS_10 = IOMUX_PAD(0x070C, 0x0324, 7, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT3__RAWNAND_D11 = IOMUX_PAD(0x0710, 0x0328, 0, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 = IOMUX_PAD(0x0710, 0x0328, 1, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT3__USBOH3_UH2_DFD_OUT27 = IOMUX_PAD(0x0710, 0x0328, 3, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT3__USBOH3_UH3_DFD_OUT27 = IOMUX_PAD(0x0710, 0x0328, 4, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT3__GPIO_2_11 = IOMUX_PAD(0x0710, 0x0328, 5, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT3__IPU1_IPU_DIAG_BUS_11 = IOMUX_PAD(0x0710, 0x0328, 6, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT3__IPU2_IPU_DIAG_BUS_11 = IOMUX_PAD(0x0710, 0x0328, 7, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT4__RAWNAND_D12 = IOMUX_PAD(0x0714, 0x032C, 0, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 = IOMUX_PAD(0x0714, 0x032C, 1, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT4__UART2_RXD = IOMUX_PAD(0x0714, 0x032C, 2, 0x0928, 6, 0),
- MX6Q_PAD_SD4_DAT4__USBOH3_UH2_DFD_OUT28 = IOMUX_PAD(0x0714, 0x032C, 3, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT4__USBOH3_UH3_DFD_OUT28 = IOMUX_PAD(0x0714, 0x032C, 4, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT4__GPIO_2_12 = IOMUX_PAD(0x0714, 0x032C, 5, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT4__IPU1_IPU_DIAG_BUS_12 = IOMUX_PAD(0x0714, 0x032C, 6, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT4__IPU2_IPU_DIAG_BUS_12 = IOMUX_PAD(0x0714, 0x032C, 7, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT5__RAWNAND_D13 = IOMUX_PAD(0x0718, 0x0330, 0, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 = IOMUX_PAD(0x0718, 0x0330, 1, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT5__UART2_CTS = IOMUX_PAD(0x0718, 0x0330, 2, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT5__UART2_RTS = IOMUX_PAD(0x0718, 0x0330, 2, 0x0924, 4, 0),
- MX6Q_PAD_SD4_DAT5__USBOH3_UH2_DFD_OUT29 = IOMUX_PAD(0x0718, 0x0330, 3, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT5__USBOH3_UH3_DFD_OUT29 = IOMUX_PAD(0x0718, 0x0330, 4, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT5__GPIO_2_13 = IOMUX_PAD(0x0718, 0x0330, 5, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT5__IPU1_IPU_DIAG_BUS_13 = IOMUX_PAD(0x0718, 0x0330, 6, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT5__IPU2_IPU_DIAG_BUS_13 = IOMUX_PAD(0x0718, 0x0330, 7, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT6__RAWNAND_D14 = IOMUX_PAD(0x071C, 0x0334, 0, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 = IOMUX_PAD(0x071C, 0x0334, 1, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT6__UART2_CTS = IOMUX_PAD(0x071C, 0x0334, 2, 0x0924, 5, 0),
- MX6Q_PAD_SD4_DAT6__USBOH3_UH2_DFD_OUT30 = IOMUX_PAD(0x071C, 0x0334, 3, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT6__USBOH3_UH3_DFD_OUT30 = IOMUX_PAD(0x071C, 0x0334, 4, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT6__GPIO_2_14 = IOMUX_PAD(0x071C, 0x0334, 5, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT6__IPU1_IPU_DIAG_BUS_14 = IOMUX_PAD(0x071C, 0x0334, 6, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT6__IPU2_IPU_DIAG_BUS_14 = IOMUX_PAD(0x071C, 0x0334, 7, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT7__RAWNAND_D15 = IOMUX_PAD(0x0720, 0x0338, 0, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 = IOMUX_PAD(0x0720, 0x0338, 1, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT7__UART2_TXD = IOMUX_PAD(0x0720, 0x0338, 2, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT7__UART2_TXD_RXD = IOMUX_PAD(0x0720, 0x0338, 2, 0x0928, 7, 0),
- MX6Q_PAD_SD4_DAT7__USBOH3_UH2_DFD_OUT31 = IOMUX_PAD(0x0720, 0x0338, 3, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT7__USBOH3_UH3_DFD_OUT31 = IOMUX_PAD(0x0720, 0x0338, 4, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT7__GPIO_2_15 = IOMUX_PAD(0x0720, 0x0338, 5, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT7__IPU1_IPU_DIAG_BUS_15 = IOMUX_PAD(0x0720, 0x0338, 6, 0x0000, 0, 0),
- MX6Q_PAD_SD4_DAT7__IPU2_IPU_DIAG_BUS_15 = IOMUX_PAD(0x0720, 0x0338, 7, 0x0000, 0, 0),
- MX6Q_PAD_SD1_DAT1__USDHC1_DAT1 = IOMUX_PAD(0x0724, 0x033C, 0, 0x0000, 0, 0),
- MX6Q_PAD_SD1_DAT1__ECSPI5_SS0 = IOMUX_PAD(0x0724, 0x033C, 1, 0x0834, 1, 0),
- MX6Q_PAD_SD1_DAT1__PWM3_PWMO = IOMUX_PAD(0x0724, 0x033C, 2, 0x0000, 0, 0),
- MX6Q_PAD_SD1_DAT1__GPT_CAPIN2 = IOMUX_PAD(0x0724, 0x033C, 3, 0x0000, 0, 0),
- MX6Q_PAD_SD1_DAT1__PCIE_CTRL_MUX_7 = IOMUX_PAD(0x0724, 0x033C, 4, 0x0000, 0, 0),
- MX6Q_PAD_SD1_DAT1__GPIO_1_17 = IOMUX_PAD(0x0724, 0x033C, 5, 0x0000, 0, 0),
- MX6Q_PAD_SD1_DAT1__HDMI_TX_OPHYDTB_0 = IOMUX_PAD(0x0724, 0x033C, 6, 0x0000, 0, 0),
- MX6Q_PAD_SD1_DAT1__ANATOP_TESTO_8 = IOMUX_PAD(0x0724, 0x033C, 7, 0x0000, 0, 0),
- MX6Q_PAD_SD1_DAT0__USDHC1_DAT0 = IOMUX_PAD(0x0728, 0x0340, 0, 0x0000, 0, 0),
- MX6Q_PAD_SD1_DAT0__ECSPI5_MISO = IOMUX_PAD(0x0728, 0x0340, 1, 0x082C, 1, 0),
- MX6Q_PAD_SD1_DAT0__CAAM_WRAP_RNG_OSCOBS = IOMUX_PAD(0x0728, 0x0340, 2, 0x0000, 0, 0),
- MX6Q_PAD_SD1_DAT0__GPT_CAPIN1 = IOMUX_PAD(0x0728, 0x0340, 3, 0x0000, 0, 0),
- MX6Q_PAD_SD1_DAT0__PCIE_CTRL_MUX_8 = IOMUX_PAD(0x0728, 0x0340, 4, 0x0000, 0, 0),
- MX6Q_PAD_SD1_DAT0__GPIO_1_16 = IOMUX_PAD(0x0728, 0x0340, 5, 0x0000, 0, 0),
- MX6Q_PAD_SD1_DAT0__HDMI_TX_OPHYDTB_1 = IOMUX_PAD(0x0728, 0x0340, 6, 0x0000, 0, 0),
- MX6Q_PAD_SD1_DAT0__ANATOP_TESTO_7 = IOMUX_PAD(0x0728, 0x0340, 7, 0x0000, 0, 0),
- MX6Q_PAD_SD1_DAT3__USDHC1_DAT3 = IOMUX_PAD(0x072C, 0x0344, 0, 0x0000, 0, 0),
- MX6Q_PAD_SD1_DAT3__ECSPI5_SS2 = IOMUX_PAD(0x072C, 0x0344, 1, 0x0000, 0, 0),
- MX6Q_PAD_SD1_DAT3__GPT_CMPOUT3 = IOMUX_PAD(0x072C, 0x0344, 2, 0x0000, 0, 0),
- MX6Q_PAD_SD1_DAT3__PWM1_PWMO = IOMUX_PAD(0x072C, 0x0344, 3, 0x0000, 0, 0),
- MX6Q_PAD_SD1_DAT3__WDOG2_WDOG_B = IOMUX_PAD(0x072C, 0x0344, 4, 0x0000, 0, 0),
- MX6Q_PAD_SD1_DAT3__GPIO_1_21 = IOMUX_PAD(0x072C, 0x0344, 5, 0x0000, 0, 0),
- MX6Q_PAD_SD1_DAT3__WDOG2_WDOG_RST_B_DEB = IOMUX_PAD(0x072C, 0x0344, 6, 0x0000, 0, 0),
- MX6Q_PAD_SD1_DAT3__ANATOP_TESTO_6 = IOMUX_PAD(0x072C, 0x0344, 7, 0x0000, 0, 0),
- MX6Q_PAD_SD1_CMD__USDHC1_CMD = IOMUX_PAD(0x0730, 0x0348, 16, 0x0000, 0, 0),
- MX6Q_PAD_SD1_CMD__ECSPI5_MOSI = IOMUX_PAD(0x0730, 0x0348, 1, 0x0830, 0, 0),
- MX6Q_PAD_SD1_CMD__PWM4_PWMO = IOMUX_PAD(0x0730, 0x0348, 2, 0x0000, 0, 0),
- MX6Q_PAD_SD1_CMD__GPT_CMPOUT1 = IOMUX_PAD(0x0730, 0x0348, 3, 0x0000, 0, 0),
- MX6Q_PAD_SD1_CMD__GPIO_1_18 = IOMUX_PAD(0x0730, 0x0348, 5, 0x0000, 0, 0),
- MX6Q_PAD_SD1_CMD__ANATOP_TESTO_5 = IOMUX_PAD(0x0730, 0x0348, 7, 0x0000, 0, 0),
- MX6Q_PAD_SD1_DAT2__USDHC1_DAT2 = IOMUX_PAD(0x0734, 0x034C, 0, 0x0000, 0, 0),
- MX6Q_PAD_SD1_DAT2__ECSPI5_SS1 = IOMUX_PAD(0x0734, 0x034C, 1, 0x0838, 1, 0),
- MX6Q_PAD_SD1_DAT2__GPT_CMPOUT2 = IOMUX_PAD(0x0734, 0x034C, 2, 0x0000, 0, 0),
- MX6Q_PAD_SD1_DAT2__PWM2_PWMO = IOMUX_PAD(0x0734, 0x034C, 3, 0x0000, 0, 0),
- MX6Q_PAD_SD1_DAT2__WDOG1_WDOG_B = IOMUX_PAD(0x0734, 0x034C, 4, 0x0000, 0, 0),
- MX6Q_PAD_SD1_DAT2__GPIO_1_19 = IOMUX_PAD(0x0734, 0x034C, 5, 0x0000, 0, 0),
- MX6Q_PAD_SD1_DAT2__WDOG1_WDOG_RST_B_DEB = IOMUX_PAD(0x0734, 0x034C, 6, 0x0000, 0, 0),
- MX6Q_PAD_SD1_DAT2__ANATOP_TESTO_4 = IOMUX_PAD(0x0734, 0x034C, 7, 0x0000, 0, 0),
- MX6Q_PAD_SD1_CLK__USDHC1_CLK = IOMUX_PAD(0x0738, 0x0350, 0, 0x0000, 0, 0),
- MX6Q_PAD_SD1_CLK__ECSPI5_SCLK = IOMUX_PAD(0x0738, 0x0350, 1, 0x0828, 0, 0),
- MX6Q_PAD_SD1_CLK__OSC32K_32K_OUT = IOMUX_PAD(0x0738, 0x0350, 2, 0x0000, 0, 0),
- MX6Q_PAD_SD1_CLK__GPT_CLKIN = IOMUX_PAD(0x0738, 0x0350, 3, 0x0000, 0, 0),
- MX6Q_PAD_SD1_CLK__GPIO_1_20 = IOMUX_PAD(0x0738, 0x0350, 5, 0x0000, 0, 0),
- MX6Q_PAD_SD1_CLK__PHY_DTB_0 = IOMUX_PAD(0x0738, 0x0350, 6, 0x0000, 0, 0),
- MX6Q_PAD_SD1_CLK__SATA_PHY_DTB_0 = IOMUX_PAD(0x0738, 0x0350, 7, 0x0000, 0, 0),
- MX6Q_PAD_SD2_CLK__USDHC2_CLK = IOMUX_PAD(0x073C, 0x0354, 0, 0x0000, 0, 0),
- MX6Q_PAD_SD2_CLK__ECSPI5_SCLK = IOMUX_PAD(0x073C, 0x0354, 1, 0x0828, 1, 0),
- MX6Q_PAD_SD2_CLK__KPP_COL_5 = IOMUX_PAD(0x073C, 0x0354, 2, 0x08E8, 3, 0),
- MX6Q_PAD_SD2_CLK__AUDMUX_AUD4_RXFS = IOMUX_PAD(0x073C, 0x0354, 3, 0x07C0, 1, 0),
- MX6Q_PAD_SD2_CLK__PCIE_CTRL_MUX_9 = IOMUX_PAD(0x073C, 0x0354, 4, 0x0000, 0, 0),
- MX6Q_PAD_SD2_CLK__GPIO_1_10 = IOMUX_PAD(0x073C, 0x0354, 5, 0x0000, 0, 0),
- MX6Q_PAD_SD2_CLK__PHY_DTB_1 = IOMUX_PAD(0x073C, 0x0354, 6, 0x0000, 0, 0),
- MX6Q_PAD_SD2_CLK__SATA_PHY_DTB_1 = IOMUX_PAD(0x073C, 0x0354, 7, 0x0000, 0, 0),
- MX6Q_PAD_SD2_CMD__USDHC2_CMD = IOMUX_PAD(0x0740, 0x0358, 16, 0x0000, 0, 0),
- MX6Q_PAD_SD2_CMD__ECSPI5_MOSI = IOMUX_PAD(0x0740, 0x0358, 1, 0x0830, 1, 0),
- MX6Q_PAD_SD2_CMD__KPP_ROW_5 = IOMUX_PAD(0x0740, 0x0358, 2, 0x08F4, 2, 0),
- MX6Q_PAD_SD2_CMD__AUDMUX_AUD4_RXC = IOMUX_PAD(0x0740, 0x0358, 3, 0x07BC, 1, 0),
- MX6Q_PAD_SD2_CMD__PCIE_CTRL_MUX_10 = IOMUX_PAD(0x0740, 0x0358, 4, 0x0000, 0, 0),
- MX6Q_PAD_SD2_CMD__GPIO_1_11 = IOMUX_PAD(0x0740, 0x0358, 5, 0x0000, 0, 0),
- MX6Q_PAD_SD2_DAT3__USDHC2_DAT3 = IOMUX_PAD(0x0744, 0x035C, 0, 0x0000, 0, 0),
- MX6Q_PAD_SD2_DAT3__ECSPI5_SS3 = IOMUX_PAD(0x0744, 0x035C, 1, 0x0000, 0, 0),
- MX6Q_PAD_SD2_DAT3__KPP_COL_6 = IOMUX_PAD(0x0744, 0x035C, 2, 0x08EC, 2, 0),
- MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC = IOMUX_PAD(0x0744, 0x035C, 3, 0x07C4, 1, 0),
- MX6Q_PAD_SD2_DAT3__PCIE_CTRL_MUX_11 = IOMUX_PAD(0x0744, 0x035C, 4, 0x0000, 0, 0),
- MX6Q_PAD_SD2_DAT3__GPIO_1_12 = IOMUX_PAD(0x0744, 0x035C, 5, 0x0000, 0, 0),
- MX6Q_PAD_SD2_DAT3__SJC_DONE = IOMUX_PAD(0x0744, 0x035C, 6, 0x0000, 0, 0),
- MX6Q_PAD_SD2_DAT3__ANATOP_TESTO_3 = IOMUX_PAD(0x0744, 0x035C, 7, 0x0000, 0, 0),
-};
-
-#endif /* __ASM_ARCH_MX6_MX6X_PINS_H__ */
diff --git a/arch/arm/include/asm/arch-mx6/mxc_hdmi.h b/arch/arm/include/asm/arch-mx6/mxc_hdmi.h
index 02a413f..9dccb3f 100644
--- a/arch/arm/include/asm/arch-mx6/mxc_hdmi.h
+++ b/arch/arm/include/asm/arch-mx6/mxc_hdmi.h
@@ -24,542 +24,553 @@
/*
* Hdmi controller registers
*/
-
-/* Identification Registers */
-#define HDMI_DESIGN_ID 0x0000
-#define HDMI_REVISION_ID 0x0001
-#define HDMI_PRODUCT_ID0 0x0002
-#define HDMI_PRODUCT_ID1 0x0003
-#define HDMI_CONFIG0_ID 0x0004
-#define HDMI_CONFIG1_ID 0x0005
-#define HDMI_CONFIG2_ID 0x0006
-#define HDMI_CONFIG3_ID 0x0007
-
-/* Interrupt Registers */
-#define HDMI_IH_FC_STAT0 0x0100
-#define HDMI_IH_FC_STAT1 0x0101
-#define HDMI_IH_FC_STAT2 0x0102
-#define HDMI_IH_AS_STAT0 0x0103
-#define HDMI_IH_PHY_STAT0 0x0104
-#define HDMI_IH_I2CM_STAT0 0x0105
-#define HDMI_IH_CEC_STAT0 0x0106
-#define HDMI_IH_VP_STAT0 0x0107
-#define HDMI_IH_I2CMPHY_STAT0 0x0108
-#define HDMI_IH_AHBDMAAUD_STAT0 0x0109
-
-#define HDMI_IH_MUTE_FC_STAT0 0x0180
-#define HDMI_IH_MUTE_FC_STAT1 0x0181
-#define HDMI_IH_MUTE_FC_STAT2 0x0182
-#define HDMI_IH_MUTE_AS_STAT0 0x0183
-#define HDMI_IH_MUTE_PHY_STAT0 0x0184
-#define HDMI_IH_MUTE_I2CM_STAT0 0x0185
-#define HDMI_IH_MUTE_CEC_STAT0 0x0186
-#define HDMI_IH_MUTE_VP_STAT0 0x0187
-#define HDMI_IH_MUTE_I2CMPHY_STAT0 0x0188
-#define HDMI_IH_MUTE_AHBDMAAUD_STAT0 0x0189
-#define HDMI_IH_MUTE 0x01FF
-
-/* Video Sample Registers */
-#define HDMI_TX_INVID0 0x0200
-#define HDMI_TX_INSTUFFING 0x0201
-#define HDMI_TX_GYDATA0 0x0202
-#define HDMI_TX_GYDATA1 0x0203
-#define HDMI_TX_RCRDATA0 0x0204
-#define HDMI_TX_RCRDATA1 0x0205
-#define HDMI_TX_BCBDATA0 0x0206
-#define HDMI_TX_BCBDATA1 0x0207
-
-/* Video Packetizer Registers */
-#define HDMI_VP_STATUS 0x0800
-#define HDMI_VP_PR_CD 0x0801
-#define HDMI_VP_STUFF 0x0802
-#define HDMI_VP_REMAP 0x0803
-#define HDMI_VP_CONF 0x0804
-#define HDMI_VP_STAT 0x0805
-#define HDMI_VP_INT 0x0806
-#define HDMI_VP_MASK 0x0807
-#define HDMI_VP_POL 0x0808
-
-/* Frame Composer Registers */
-#define HDMI_FC_INVIDCONF 0x1000
-#define HDMI_FC_INHACTV0 0x1001
-#define HDMI_FC_INHACTV1 0x1002
-#define HDMI_FC_INHBLANK0 0x1003
-#define HDMI_FC_INHBLANK1 0x1004
-#define HDMI_FC_INVACTV0 0x1005
-#define HDMI_FC_INVACTV1 0x1006
-#define HDMI_FC_INVBLANK 0x1007
-#define HDMI_FC_HSYNCINDELAY0 0x1008
-#define HDMI_FC_HSYNCINDELAY1 0x1009
-#define HDMI_FC_HSYNCINWIDTH0 0x100A
-#define HDMI_FC_HSYNCINWIDTH1 0x100B
-#define HDMI_FC_VSYNCINDELAY 0x100C
-#define HDMI_FC_VSYNCINWIDTH 0x100D
-#define HDMI_FC_INFREQ0 0x100E
-#define HDMI_FC_INFREQ1 0x100F
-#define HDMI_FC_INFREQ2 0x1010
-#define HDMI_FC_CTRLDUR 0x1011
-#define HDMI_FC_EXCTRLDUR 0x1012
-#define HDMI_FC_EXCTRLSPAC 0x1013
-#define HDMI_FC_CH0PREAM 0x1014
-#define HDMI_FC_CH1PREAM 0x1015
-#define HDMI_FC_CH2PREAM 0x1016
-#define HDMI_FC_AVICONF3 0x1017
-#define HDMI_FC_GCP 0x1018
-#define HDMI_FC_AVICONF0 0x1019
-#define HDMI_FC_AVICONF1 0x101A
-#define HDMI_FC_AVICONF2 0x101B
-#define HDMI_FC_AVIVID 0x101C
-#define HDMI_FC_AVIETB0 0x101D
-#define HDMI_FC_AVIETB1 0x101E
-#define HDMI_FC_AVISBB0 0x101F
-#define HDMI_FC_AVISBB1 0x1020
-#define HDMI_FC_AVIELB0 0x1021
-#define HDMI_FC_AVIELB1 0x1022
-#define HDMI_FC_AVISRB0 0x1023
-#define HDMI_FC_AVISRB1 0x1024
-#define HDMI_FC_AUDICONF0 0x1025
-#define HDMI_FC_AUDICONF1 0x1026
-#define HDMI_FC_AUDICONF2 0x1027
-#define HDMI_FC_AUDICONF3 0x1028
-#define HDMI_FC_VSDIEEEID0 0x1029
-#define HDMI_FC_VSDSIZE 0x102A
-#define HDMI_FC_VSDIEEEID1 0x1030
-#define HDMI_FC_VSDIEEEID2 0x1031
-#define HDMI_FC_VSDPAYLOAD0 0x1032
-#define HDMI_FC_VSDPAYLOAD1 0x1033
-#define HDMI_FC_VSDPAYLOAD2 0x1034
-#define HDMI_FC_VSDPAYLOAD3 0x1035
-#define HDMI_FC_VSDPAYLOAD4 0x1036
-#define HDMI_FC_VSDPAYLOAD5 0x1037
-#define HDMI_FC_VSDPAYLOAD6 0x1038
-#define HDMI_FC_VSDPAYLOAD7 0x1039
-#define HDMI_FC_VSDPAYLOAD8 0x103A
-#define HDMI_FC_VSDPAYLOAD9 0x103B
-#define HDMI_FC_VSDPAYLOAD10 0x103C
-#define HDMI_FC_VSDPAYLOAD11 0x103D
-#define HDMI_FC_VSDPAYLOAD12 0x103E
-#define HDMI_FC_VSDPAYLOAD13 0x103F
-#define HDMI_FC_VSDPAYLOAD14 0x1040
-#define HDMI_FC_VSDPAYLOAD15 0x1041
-#define HDMI_FC_VSDPAYLOAD16 0x1042
-#define HDMI_FC_VSDPAYLOAD17 0x1043
-#define HDMI_FC_VSDPAYLOAD18 0x1044
-#define HDMI_FC_VSDPAYLOAD19 0x1045
-#define HDMI_FC_VSDPAYLOAD20 0x1046
-#define HDMI_FC_VSDPAYLOAD21 0x1047
-#define HDMI_FC_VSDPAYLOAD22 0x1048
-#define HDMI_FC_VSDPAYLOAD23 0x1049
-#define HDMI_FC_SPDVENDORNAME0 0x104A
-#define HDMI_FC_SPDVENDORNAME1 0x104B
-#define HDMI_FC_SPDVENDORNAME2 0x104C
-#define HDMI_FC_SPDVENDORNAME3 0x104D
-#define HDMI_FC_SPDVENDORNAME4 0x104E
-#define HDMI_FC_SPDVENDORNAME5 0x104F
-#define HDMI_FC_SPDVENDORNAME6 0x1050
-#define HDMI_FC_SPDVENDORNAME7 0x1051
-#define HDMI_FC_SDPPRODUCTNAME0 0x1052
-#define HDMI_FC_SDPPRODUCTNAME1 0x1053
-#define HDMI_FC_SDPPRODUCTNAME2 0x1054
-#define HDMI_FC_SDPPRODUCTNAME3 0x1055
-#define HDMI_FC_SDPPRODUCTNAME4 0x1056
-#define HDMI_FC_SDPPRODUCTNAME5 0x1057
-#define HDMI_FC_SDPPRODUCTNAME6 0x1058
-#define HDMI_FC_SDPPRODUCTNAME7 0x1059
-#define HDMI_FC_SDPPRODUCTNAME8 0x105A
-#define HDMI_FC_SDPPRODUCTNAME9 0x105B
-#define HDMI_FC_SDPPRODUCTNAME10 0x105C
-#define HDMI_FC_SDPPRODUCTNAME11 0x105D
-#define HDMI_FC_SDPPRODUCTNAME12 0x105E
-#define HDMI_FC_SDPPRODUCTNAME13 0x105F
-#define HDMI_FC_SDPPRODUCTNAME14 0x1060
-#define HDMI_FC_SPDPRODUCTNAME15 0x1061
-#define HDMI_FC_SPDDEVICEINF 0x1062
-#define HDMI_FC_AUDSCONF 0x1063
-#define HDMI_FC_AUDSSTAT 0x1064
-#define HDMI_FC_DATACH0FILL 0x1070
-#define HDMI_FC_DATACH1FILL 0x1071
-#define HDMI_FC_DATACH2FILL 0x1072
-#define HDMI_FC_CTRLQHIGH 0x1073
-#define HDMI_FC_CTRLQLOW 0x1074
-#define HDMI_FC_ACP0 0x1075
-#define HDMI_FC_ACP28 0x1076
-#define HDMI_FC_ACP27 0x1077
-#define HDMI_FC_ACP26 0x1078
-#define HDMI_FC_ACP25 0x1079
-#define HDMI_FC_ACP24 0x107A
-#define HDMI_FC_ACP23 0x107B
-#define HDMI_FC_ACP22 0x107C
-#define HDMI_FC_ACP21 0x107D
-#define HDMI_FC_ACP20 0x107E
-#define HDMI_FC_ACP19 0x107F
-#define HDMI_FC_ACP18 0x1080
-#define HDMI_FC_ACP17 0x1081
-#define HDMI_FC_ACP16 0x1082
-#define HDMI_FC_ACP15 0x1083
-#define HDMI_FC_ACP14 0x1084
-#define HDMI_FC_ACP13 0x1085
-#define HDMI_FC_ACP12 0x1086
-#define HDMI_FC_ACP11 0x1087
-#define HDMI_FC_ACP10 0x1088
-#define HDMI_FC_ACP9 0x1089
-#define HDMI_FC_ACP8 0x108A
-#define HDMI_FC_ACP7 0x108B
-#define HDMI_FC_ACP6 0x108C
-#define HDMI_FC_ACP5 0x108D
-#define HDMI_FC_ACP4 0x108E
-#define HDMI_FC_ACP3 0x108F
-#define HDMI_FC_ACP2 0x1090
-#define HDMI_FC_ACP1 0x1091
-#define HDMI_FC_ISCR1_0 0x1092
-#define HDMI_FC_ISCR1_16 0x1093
-#define HDMI_FC_ISCR1_15 0x1094
-#define HDMI_FC_ISCR1_14 0x1095
-#define HDMI_FC_ISCR1_13 0x1096
-#define HDMI_FC_ISCR1_12 0x1097
-#define HDMI_FC_ISCR1_11 0x1098
-#define HDMI_FC_ISCR1_10 0x1099
-#define HDMI_FC_ISCR1_9 0x109A
-#define HDMI_FC_ISCR1_8 0x109B
-#define HDMI_FC_ISCR1_7 0x109C
-#define HDMI_FC_ISCR1_6 0x109D
-#define HDMI_FC_ISCR1_5 0x109E
-#define HDMI_FC_ISCR1_4 0x109F
-#define HDMI_FC_ISCR1_3 0x10A0
-#define HDMI_FC_ISCR1_2 0x10A1
-#define HDMI_FC_ISCR1_1 0x10A2
-#define HDMI_FC_ISCR2_15 0x10A3
-#define HDMI_FC_ISCR2_14 0x10A4
-#define HDMI_FC_ISCR2_13 0x10A5
-#define HDMI_FC_ISCR2_12 0x10A6
-#define HDMI_FC_ISCR2_11 0x10A7
-#define HDMI_FC_ISCR2_10 0x10A8
-#define HDMI_FC_ISCR2_9 0x10A9
-#define HDMI_FC_ISCR2_8 0x10AA
-#define HDMI_FC_ISCR2_7 0x10AB
-#define HDMI_FC_ISCR2_6 0x10AC
-#define HDMI_FC_ISCR2_5 0x10AD
-#define HDMI_FC_ISCR2_4 0x10AE
-#define HDMI_FC_ISCR2_3 0x10AF
-#define HDMI_FC_ISCR2_2 0x10B0
-#define HDMI_FC_ISCR2_1 0x10B1
-#define HDMI_FC_ISCR2_0 0x10B2
-#define HDMI_FC_DATAUTO0 0x10B3
-#define HDMI_FC_DATAUTO1 0x10B4
-#define HDMI_FC_DATAUTO2 0x10B5
-#define HDMI_FC_DATMAN 0x10B6
-#define HDMI_FC_DATAUTO3 0x10B7
-#define HDMI_FC_RDRB0 0x10B8
-#define HDMI_FC_RDRB1 0x10B9
-#define HDMI_FC_RDRB2 0x10BA
-#define HDMI_FC_RDRB3 0x10BB
-#define HDMI_FC_RDRB4 0x10BC
-#define HDMI_FC_RDRB5 0x10BD
-#define HDMI_FC_RDRB6 0x10BE
-#define HDMI_FC_RDRB7 0x10BF
-#define HDMI_FC_STAT0 0x10D0
-#define HDMI_FC_INT0 0x10D1
-#define HDMI_FC_MASK0 0x10D2
-#define HDMI_FC_POL0 0x10D3
-#define HDMI_FC_STAT1 0x10D4
-#define HDMI_FC_INT1 0x10D5
-#define HDMI_FC_MASK1 0x10D6
-#define HDMI_FC_POL1 0x10D7
-#define HDMI_FC_STAT2 0x10D8
-#define HDMI_FC_INT2 0x10D9
-#define HDMI_FC_MASK2 0x10DA
-#define HDMI_FC_POL2 0x10DB
-#define HDMI_FC_PRCONF 0x10E0
-
-#define HDMI_FC_GMD_STAT 0x1100
-#define HDMI_FC_GMD_EN 0x1101
-#define HDMI_FC_GMD_UP 0x1102
-#define HDMI_FC_GMD_CONF 0x1103
-#define HDMI_FC_GMD_HB 0x1104
-#define HDMI_FC_GMD_PB0 0x1105
-#define HDMI_FC_GMD_PB1 0x1106
-#define HDMI_FC_GMD_PB2 0x1107
-#define HDMI_FC_GMD_PB3 0x1108
-#define HDMI_FC_GMD_PB4 0x1109
-#define HDMI_FC_GMD_PB5 0x110A
-#define HDMI_FC_GMD_PB6 0x110B
-#define HDMI_FC_GMD_PB7 0x110C
-#define HDMI_FC_GMD_PB8 0x110D
-#define HDMI_FC_GMD_PB9 0x110E
-#define HDMI_FC_GMD_PB10 0x110F
-#define HDMI_FC_GMD_PB11 0x1110
-#define HDMI_FC_GMD_PB12 0x1111
-#define HDMI_FC_GMD_PB13 0x1112
-#define HDMI_FC_GMD_PB14 0x1113
-#define HDMI_FC_GMD_PB15 0x1114
-#define HDMI_FC_GMD_PB16 0x1115
-#define HDMI_FC_GMD_PB17 0x1116
-#define HDMI_FC_GMD_PB18 0x1117
-#define HDMI_FC_GMD_PB19 0x1118
-#define HDMI_FC_GMD_PB20 0x1119
-#define HDMI_FC_GMD_PB21 0x111A
-#define HDMI_FC_GMD_PB22 0x111B
-#define HDMI_FC_GMD_PB23 0x111C
-#define HDMI_FC_GMD_PB24 0x111D
-#define HDMI_FC_GMD_PB25 0x111E
-#define HDMI_FC_GMD_PB26 0x111F
-#define HDMI_FC_GMD_PB27 0x1120
-
-#define HDMI_FC_DBGFORCE 0x1200
-#define HDMI_FC_DBGAUD0CH0 0x1201
-#define HDMI_FC_DBGAUD1CH0 0x1202
-#define HDMI_FC_DBGAUD2CH0 0x1203
-#define HDMI_FC_DBGAUD0CH1 0x1204
-#define HDMI_FC_DBGAUD1CH1 0x1205
-#define HDMI_FC_DBGAUD2CH1 0x1206
-#define HDMI_FC_DBGAUD0CH2 0x1207
-#define HDMI_FC_DBGAUD1CH2 0x1208
-#define HDMI_FC_DBGAUD2CH2 0x1209
-#define HDMI_FC_DBGAUD0CH3 0x120A
-#define HDMI_FC_DBGAUD1CH3 0x120B
-#define HDMI_FC_DBGAUD2CH3 0x120C
-#define HDMI_FC_DBGAUD0CH4 0x120D
-#define HDMI_FC_DBGAUD1CH4 0x120E
-#define HDMI_FC_DBGAUD2CH4 0x120F
-#define HDMI_FC_DBGAUD0CH5 0x1210
-#define HDMI_FC_DBGAUD1CH5 0x1211
-#define HDMI_FC_DBGAUD2CH5 0x1212
-#define HDMI_FC_DBGAUD0CH6 0x1213
-#define HDMI_FC_DBGAUD1CH6 0x1214
-#define HDMI_FC_DBGAUD2CH6 0x1215
-#define HDMI_FC_DBGAUD0CH7 0x1216
-#define HDMI_FC_DBGAUD1CH7 0x1217
-#define HDMI_FC_DBGAUD2CH7 0x1218
-#define HDMI_FC_DBGTMDS0 0x1219
-#define HDMI_FC_DBGTMDS1 0x121A
-#define HDMI_FC_DBGTMDS2 0x121B
-
-/* HDMI Source PHY Registers */
-#define HDMI_PHY_CONF0 0x3000
-#define HDMI_PHY_TST0 0x3001
-#define HDMI_PHY_TST1 0x3002
-#define HDMI_PHY_TST2 0x3003
-#define HDMI_PHY_STAT0 0x3004
-#define HDMI_PHY_INT0 0x3005
-#define HDMI_PHY_MASK0 0x3006
-#define HDMI_PHY_POL0 0x3007
-
-/* HDMI Master PHY Registers */
-#define HDMI_PHY_I2CM_SLAVE_ADDR 0x3020
-#define HDMI_PHY_I2CM_ADDRESS_ADDR 0x3021
-#define HDMI_PHY_I2CM_DATAO_1_ADDR 0x3022
-#define HDMI_PHY_I2CM_DATAO_0_ADDR 0x3023
-#define HDMI_PHY_I2CM_DATAI_1_ADDR 0x3024
-#define HDMI_PHY_I2CM_DATAI_0_ADDR 0x3025
-#define HDMI_PHY_I2CM_OPERATION_ADDR 0x3026
-#define HDMI_PHY_I2CM_INT_ADDR 0x3027
-#define HDMI_PHY_I2CM_CTLINT_ADDR 0x3028
-#define HDMI_PHY_I2CM_DIV_ADDR 0x3029
-#define HDMI_PHY_I2CM_SOFTRSTZ_ADDR 0x302a
-#define HDMI_PHY_I2CM_SS_SCL_HCNT_1_ADDR 0x302b
-#define HDMI_PHY_I2CM_SS_SCL_HCNT_0_ADDR 0x302c
-#define HDMI_PHY_I2CM_SS_SCL_LCNT_1_ADDR 0x302d
-#define HDMI_PHY_I2CM_SS_SCL_LCNT_0_ADDR 0x302e
-#define HDMI_PHY_I2CM_FS_SCL_HCNT_1_ADDR 0x302f
-#define HDMI_PHY_I2CM_FS_SCL_HCNT_0_ADDR 0x3030
-#define HDMI_PHY_I2CM_FS_SCL_LCNT_1_ADDR 0x3031
-#define HDMI_PHY_I2CM_FS_SCL_LCNT_0_ADDR 0x3032
-
-/* Audio Sampler Registers */
-#define HDMI_AUD_CONF0 0x3100
-#define HDMI_AUD_CONF1 0x3101
-#define HDMI_AUD_INT 0x3102
-#define HDMI_AUD_CONF2 0x3103
-#define HDMI_AUD_N1 0x3200
-#define HDMI_AUD_N2 0x3201
-#define HDMI_AUD_N3 0x3202
-#define HDMI_AUD_CTS1 0x3203
-#define HDMI_AUD_CTS2 0x3204
-#define HDMI_AUD_CTS3 0x3205
-#define HDMI_AUD_INPUTCLKFS 0x3206
-#define HDMI_AUD_SPDIFINT 0x3302
-#define HDMI_AUD_CONF0_HBR 0x3400
-#define HDMI_AUD_HBR_STATUS 0x3401
-#define HDMI_AUD_HBR_INT 0x3402
-#define HDMI_AUD_HBR_POL 0x3403
-#define HDMI_AUD_HBR_MASK 0x3404
-
-/* Generic Parallel Audio Interface Registers */
-/* Not used as GPAUD interface is not enabled in hw */
-#define HDMI_GP_CONF0 0x3500
-#define HDMI_GP_CONF1 0x3501
-#define HDMI_GP_CONF2 0x3502
-#define HDMI_GP_STAT 0x3503
-#define HDMI_GP_INT 0x3504
-#define HDMI_GP_MASK 0x3505
-#define HDMI_GP_POL 0x3506
-
-/* Audio DMA Registers */
-#define HDMI_AHB_DMA_CONF0 0x3600
-#define HDMI_AHB_DMA_START 0x3601
-#define HDMI_AHB_DMA_STOP 0x3602
-#define HDMI_AHB_DMA_THRSLD 0x3603
-#define HDMI_AHB_DMA_STRADDR0 0x3604
-#define HDMI_AHB_DMA_STRADDR1 0x3605
-#define HDMI_AHB_DMA_STRADDR2 0x3606
-#define HDMI_AHB_DMA_STRADDR3 0x3607
-#define HDMI_AHB_DMA_STPADDR0 0x3608
-#define HDMI_AHB_DMA_STPADDR1 0x3609
-#define HDMI_AHB_DMA_STPADDR2 0x360a
-#define HDMI_AHB_DMA_STPADDR3 0x360b
-#define HDMI_AHB_DMA_BSTADDR0 0x360c
-#define HDMI_AHB_DMA_BSTADDR1 0x360d
-#define HDMI_AHB_DMA_BSTADDR2 0x360e
-#define HDMI_AHB_DMA_BSTADDR3 0x360f
-#define HDMI_AHB_DMA_MBLENGTH0 0x3610
-#define HDMI_AHB_DMA_MBLENGTH1 0x3611
-#define HDMI_AHB_DMA_STAT 0x3612
-#define HDMI_AHB_DMA_INT 0x3613
-#define HDMI_AHB_DMA_MASK 0x3614
-#define HDMI_AHB_DMA_POL 0x3615
-#define HDMI_AHB_DMA_CONF1 0x3616
-#define HDMI_AHB_DMA_BUFFSTAT 0x3617
-#define HDMI_AHB_DMA_BUFFINT 0x3618
-#define HDMI_AHB_DMA_BUFFMASK 0x3619
-#define HDMI_AHB_DMA_BUFFPOL 0x361a
-
-/* Main Controller Registers */
-#define HDMI_MC_SFRDIV 0x4000
-#define HDMI_MC_CLKDIS 0x4001
-#define HDMI_MC_SWRSTZ 0x4002
-#define HDMI_MC_OPCTRL 0x4003
-#define HDMI_MC_FLOWCTRL 0x4004
-#define HDMI_MC_PHYRSTZ 0x4005
-#define HDMI_MC_LOCKONCLOCK 0x4006
-#define HDMI_MC_HEACPHY_RST 0x4007
-
-/* Color Space Converter Registers */
-#define HDMI_CSC_CFG 0x4100
-#define HDMI_CSC_SCALE 0x4101
-#define HDMI_CSC_COEF_A1_MSB 0x4102
-#define HDMI_CSC_COEF_A1_LSB 0x4103
-#define HDMI_CSC_COEF_A2_MSB 0x4104
-#define HDMI_CSC_COEF_A2_LSB 0x4105
-#define HDMI_CSC_COEF_A3_MSB 0x4106
-#define HDMI_CSC_COEF_A3_LSB 0x4107
-#define HDMI_CSC_COEF_A4_MSB 0x4108
-#define HDMI_CSC_COEF_A4_LSB 0x4109
-#define HDMI_CSC_COEF_B1_MSB 0x410A
-#define HDMI_CSC_COEF_B1_LSB 0x410B
-#define HDMI_CSC_COEF_B2_MSB 0x410C
-#define HDMI_CSC_COEF_B2_LSB 0x410D
-#define HDMI_CSC_COEF_B3_MSB 0x410E
-#define HDMI_CSC_COEF_B3_LSB 0x410F
-#define HDMI_CSC_COEF_B4_MSB 0x4110
-#define HDMI_CSC_COEF_B4_LSB 0x4111
-#define HDMI_CSC_COEF_C1_MSB 0x4112
-#define HDMI_CSC_COEF_C1_LSB 0x4113
-#define HDMI_CSC_COEF_C2_MSB 0x4114
-#define HDMI_CSC_COEF_C2_LSB 0x4115
-#define HDMI_CSC_COEF_C3_MSB 0x4116
-#define HDMI_CSC_COEF_C3_LSB 0x4117
-#define HDMI_CSC_COEF_C4_MSB 0x4118
-#define HDMI_CSC_COEF_C4_LSB 0x4119
-
-/* HDCP Encryption Engine Registers */
-#define HDMI_A_HDCPCFG0 0x5000
-#define HDMI_A_HDCPCFG1 0x5001
-#define HDMI_A_HDCPOBS0 0x5002
-#define HDMI_A_HDCPOBS1 0x5003
-#define HDMI_A_HDCPOBS2 0x5004
-#define HDMI_A_HDCPOBS3 0x5005
-#define HDMI_A_APIINTCLR 0x5006
-#define HDMI_A_APIINTSTAT 0x5007
-#define HDMI_A_APIINTMSK 0x5008
-#define HDMI_A_VIDPOLCFG 0x5009
-#define HDMI_A_OESSWCFG 0x500A
-#define HDMI_A_TIMER1SETUP0 0x500B
-#define HDMI_A_TIMER1SETUP1 0x500C
-#define HDMI_A_TIMER2SETUP0 0x500D
-#define HDMI_A_TIMER2SETUP1 0x500E
-#define HDMI_A_100MSCFG 0x500F
-#define HDMI_A_2SCFG0 0x5010
-#define HDMI_A_2SCFG1 0x5011
-#define HDMI_A_5SCFG0 0x5012
-#define HDMI_A_5SCFG1 0x5013
-#define HDMI_A_SRMVERLSB 0x5014
-#define HDMI_A_SRMVERMSB 0x5015
-#define HDMI_A_SRMCTRL 0x5016
-#define HDMI_A_SFRSETUP 0x5017
-#define HDMI_A_I2CHSETUP 0x5018
-#define HDMI_A_INTSETUP 0x5019
-#define HDMI_A_PRESETUP 0x501A
-#define HDMI_A_SRM_BASE 0x5020
-
-/* CEC Engine Registers */
-#define HDMI_CEC_CTRL 0x7D00
-#define HDMI_CEC_STAT 0x7D01
-#define HDMI_CEC_MASK 0x7D02
-#define HDMI_CEC_POLARITY 0x7D03
-#define HDMI_CEC_INT 0x7D04
-#define HDMI_CEC_ADDR_L 0x7D05
-#define HDMI_CEC_ADDR_H 0x7D06
-#define HDMI_CEC_TX_CNT 0x7D07
-#define HDMI_CEC_RX_CNT 0x7D08
-#define HDMI_CEC_TX_DATA0 0x7D10
-#define HDMI_CEC_TX_DATA1 0x7D11
-#define HDMI_CEC_TX_DATA2 0x7D12
-#define HDMI_CEC_TX_DATA3 0x7D13
-#define HDMI_CEC_TX_DATA4 0x7D14
-#define HDMI_CEC_TX_DATA5 0x7D15
-#define HDMI_CEC_TX_DATA6 0x7D16
-#define HDMI_CEC_TX_DATA7 0x7D17
-#define HDMI_CEC_TX_DATA8 0x7D18
-#define HDMI_CEC_TX_DATA9 0x7D19
-#define HDMI_CEC_TX_DATA10 0x7D1a
-#define HDMI_CEC_TX_DATA11 0x7D1b
-#define HDMI_CEC_TX_DATA12 0x7D1c
-#define HDMI_CEC_TX_DATA13 0x7D1d
-#define HDMI_CEC_TX_DATA14 0x7D1e
-#define HDMI_CEC_TX_DATA15 0x7D1f
-#define HDMI_CEC_RX_DATA0 0x7D20
-#define HDMI_CEC_RX_DATA1 0x7D21
-#define HDMI_CEC_RX_DATA2 0x7D22
-#define HDMI_CEC_RX_DATA3 0x7D23
-#define HDMI_CEC_RX_DATA4 0x7D24
-#define HDMI_CEC_RX_DATA5 0x7D25
-#define HDMI_CEC_RX_DATA6 0x7D26
-#define HDMI_CEC_RX_DATA7 0x7D27
-#define HDMI_CEC_RX_DATA8 0x7D28
-#define HDMI_CEC_RX_DATA9 0x7D29
-#define HDMI_CEC_RX_DATA10 0x7D2a
-#define HDMI_CEC_RX_DATA11 0x7D2b
-#define HDMI_CEC_RX_DATA12 0x7D2c
-#define HDMI_CEC_RX_DATA13 0x7D2d
-#define HDMI_CEC_RX_DATA14 0x7D2e
-#define HDMI_CEC_RX_DATA15 0x7D2f
-#define HDMI_CEC_LOCK 0x7D30
-#define HDMI_CEC_WKUPCTRL 0x7D31
-
-/* I2C Master Registers (E-DDC) */
-#define HDMI_I2CM_SLAVE 0x7E00
-#define HDMI_I2CMESS 0x7E01
-#define HDMI_I2CM_DATAO 0x7E02
-#define HDMI_I2CM_DATAI 0x7E03
-#define HDMI_I2CM_OPERATION 0x7E04
-#define HDMI_I2CM_INT 0x7E05
-#define HDMI_I2CM_CTLINT 0x7E06
-#define HDMI_I2CM_DIV 0x7E07
-#define HDMI_I2CM_SEGADDR 0x7E08
-#define HDMI_I2CM_SOFTRSTZ 0x7E09
-#define HDMI_I2CM_SEGPTR 0x7E0A
-#define HDMI_I2CM_SS_SCL_HCNT_1_ADDR 0x7E0B
-#define HDMI_I2CM_SS_SCL_HCNT_0_ADDR 0x7E0C
-#define HDMI_I2CM_SS_SCL_LCNT_1_ADDR 0x7E0D
-#define HDMI_I2CM_SS_SCL_LCNT_0_ADDR 0x7E0E
-#define HDMI_I2CM_FS_SCL_HCNT_1_ADDR 0x7E0F
-#define HDMI_I2CM_FS_SCL_HCNT_0_ADDR 0x7E10
-#define HDMI_I2CM_FS_SCL_LCNT_1_ADDR 0x7E11
-#define HDMI_I2CM_FS_SCL_LCNT_0_ADDR 0x7E12
-
-/* Random Number Generator Registers (RNG) */
-#define HDMI_RNG_BASE 0x8000
-
+struct hdmi_regs {
+ /*Identification Registers */
+ u8 design_id; /* 0x000 */
+ u8 revision_id; /* 0x001 */
+ u8 product_id0; /* 0x002 */
+ u8 product_id1; /* 0x003 */
+ u8 config0_id; /* 0x004 */
+ u8 config1_id; /* 0x005 */
+ u8 config2_id; /* 0x006 */
+ u8 config3_id; /* 0x007 */
+ u8 reserved1[0xf8];
+ /* Interrupt Registers */
+ u8 ih_fc_stat0; /* 0x100 */
+ u8 ih_fc_stat1; /* 0x101 */
+ u8 ih_fc_stat2; /* 0x102 */
+ u8 ih_as_stat0; /* 0x103 */
+ u8 ih_phy_stat0; /* 0x104 */
+ u8 ih_i2cm_stat0; /* 0x105 */
+ u8 ih_cec_stat0; /* 0x106 */
+ u8 ih_vp_stat0; /* 0x107 */
+ u8 ih_i2cmphy_stat0; /* 0x108 */
+ u8 ih_ahbdmaaud_stat0; /* 0x109 */
+ u8 reserved2[0x76];
+ u8 ih_mute_fc_stat0; /* 0x180 */
+ u8 ih_mute_fc_stat1; /* 0x181 */
+ u8 ih_mute_fc_stat2; /* 0x182 */
+ u8 ih_mute_as_stat0; /* 0x183 */
+ u8 ih_mute_phy_stat0; /* 0x184 */
+ u8 ih_mute_i2cm_stat0; /* 0x185 */
+ u8 ih_mute_cec_stat0; /* 0x186 */
+ u8 ih_mute_vp_stat0; /* 0x187 */
+ u8 ih_mute_i2cmphy_stat0; /* 0x188 */
+ u8 ih_mute_ahbdmaaud_stat0; /* 0x189 */
+ u8 reserved3[0x75];
+ u8 ih_mute; /* 0x1ff */
+ /* Video Sample Registers */
+ u8 tx_invid0; /* 0x200 */
+ u8 tx_instuffing; /* 0x201 */
+ u8 tx_gydata0; /* 0x202 */
+ u8 tx_gydata1; /* 0x203 */
+ u8 tx_rcrdata0; /* 0x204 */
+ u8 tx_rcrdata1; /* 0x205 */
+ u8 tx_bcbdata0; /* 0x206 */
+ u8 tx_bcbdata1; /* 0x207 */
+ u8 reserved4[0x5f8];
+ /* Video Packetizer Registers */
+ u8 vp_status; /* 0x800 */
+ u8 vp_pr_cd; /* 0x801 */
+ u8 vp_stuff; /* 0x802 */
+ u8 vp_remap; /* 0x803 */
+ u8 vp_conf; /* 0x804 */
+ u8 vp_stat; /* 0x805 */
+ u8 vp_int; /* 0x806 */
+ u8 vp_mask; /* 0x807 */
+ u8 vp_pol; /* 0x808 */
+ u8 reserved5[0x7f7];
+ /* Frame Composer Registers */
+ u8 fc_invidconf; /* 0x1000 */
+ u8 fc_inhactv0; /* 0x1001 */
+ u8 fc_inhactv1; /* 0x1002 */
+ u8 fc_inhblank0; /* 0x1003 */
+ u8 fc_inhblank1; /* 0x1004 */
+ u8 fc_invactv0; /* 0x1005 */
+ u8 fc_invactv1; /* 0x1006 */
+ u8 fc_invblank; /* 0x1007 */
+ u8 fc_hsyncindelay0; /* 0x1008 */
+ u8 fc_hsyncindelay1; /* 0x1009 */
+ u8 fc_hsyncinwidth0; /* 0x100a */
+ u8 fc_hsyncinwidth1; /* 0x100b */
+ u8 fc_vsyncindelay; /* 0x100c */
+ u8 fc_vsyncinwidth; /* 0x100d */
+ u8 fc_infreq0; /* 0x100e */
+ u8 fc_infreq1; /* 0x100f */
+ u8 fc_infreq2; /* 0x1010 */
+ u8 fc_ctrldur; /* 0x1011 */
+ u8 fc_exctrldur; /* 0x1012 */
+ u8 fc_exctrlspac; /* 0x1013 */
+ u8 fc_ch0pream; /* 0x1014 */
+ u8 fc_ch1pream; /* 0x1015 */
+ u8 fc_ch2pream; /* 0x1016 */
+ u8 fc_aviconf3; /* 0x1017 */
+ u8 fc_gcp; /* 0x1018 */
+ u8 fc_aviconf0; /* 0x1019 */
+ u8 fc_aviconf1; /* 0x101a */
+ u8 fc_aviconf2; /* 0x101b */
+ u8 fc_avivid; /* 0x101c */
+ u8 fc_avietb0; /* 0x101d */
+ u8 fc_avietb1; /* 0x101e */
+ u8 fc_avisbb0; /* 0x101f */
+ u8 fc_avisbb1; /* 0x1020 */
+ u8 fc_avielb0; /* 0x1021 */
+ u8 fc_avielb1; /* 0x1022 */
+ u8 fc_avisrb0; /* 0x1023 */
+ u8 fc_avisrb1; /* 0x1024 */
+ u8 fc_audiconf0; /* 0x1025 */
+ u8 fc_audiconf1; /* 0x1026 */
+ u8 fc_audiconf2; /* 0x1027 */
+ u8 fc_audiconf3; /* 0x1028 */
+ u8 fc_vsdieeeid0; /* 0x1029 */
+ u8 fc_vsdsize; /* 0x102a */
+ u8 reserved6[5];
+ u8 fc_vsdieeeid1; /* 0x1030 */
+ u8 fc_vsdieeeid2; /* 0x1031 */
+ u8 fc_vsdpayload0; /* 0x1032 */
+ u8 fc_vsdpayload1; /* 0x1033 */
+ u8 fc_vsdpayload2; /* 0x1034 */
+ u8 fc_vsdpayload3; /* 0x1035 */
+ u8 fc_vsdpayload4; /* 0x1036 */
+ u8 fc_vsdpayload5; /* 0x1037 */
+ u8 fc_vsdpayload6; /* 0x1038 */
+ u8 fc_vsdpayload7; /* 0x1039 */
+ u8 fc_vsdpayload8; /* 0x103a */
+ u8 fc_vsdpayload9; /* 0x103b */
+ u8 fc_vsdpayload10; /* 0x103c */
+ u8 fc_vsdpayload11; /* 0x103d */
+ u8 fc_vsdpayload12; /* 0x103e */
+ u8 fc_vsdpayload13; /* 0x103f */
+ u8 fc_vsdpayload14; /* 0x1040 */
+ u8 fc_vsdpayload15; /* 0x1041 */
+ u8 fc_vsdpayload16; /* 0x1042 */
+ u8 fc_vsdpayload17; /* 0x1043 */
+ u8 fc_vsdpayload18; /* 0x1044 */
+ u8 fc_vsdpayload19; /* 0x1045 */
+ u8 fc_vsdpayload20; /* 0x1046 */
+ u8 fc_vsdpayload21; /* 0x1047 */
+ u8 fc_vsdpayload22; /* 0x1048 */
+ u8 fc_vsdpayload23; /* 0x1049 */
+ u8 fc_spdvendorname0; /* 0x104a */
+ u8 fc_spdvendorname1; /* 0x104b */
+ u8 fc_spdvendorname2; /* 0x104c */
+ u8 fc_spdvendorname3; /* 0x104d */
+ u8 fc_spdvendorname4; /* 0x104e */
+ u8 fc_spdvendorname5; /* 0x104f */
+ u8 fc_spdvendorname6; /* 0x1050 */
+ u8 fc_spdvendorname7; /* 0x1051 */
+ u8 fc_sdpproductname0; /* 0x1052 */
+ u8 fc_sdpproductname1; /* 0x1053 */
+ u8 fc_sdpproductname2; /* 0x1054 */
+ u8 fc_sdpproductname3; /* 0x1055 */
+ u8 fc_sdpproductname4; /* 0x1056 */
+ u8 fc_sdpproductname5; /* 0x1057 */
+ u8 fc_sdpproductname6; /* 0x1058 */
+ u8 fc_sdpproductname7; /* 0x1059 */
+ u8 fc_sdpproductname8; /* 0x105a */
+ u8 fc_sdpproductname9; /* 0x105b */
+ u8 fc_sdpproductname10; /* 0x105c */
+ u8 fc_sdpproductname11; /* 0x105d */
+ u8 fc_sdpproductname12; /* 0x105e */
+ u8 fc_sdpproductname13; /* 0x105f */
+ u8 fc_sdpproductname14; /* 0x1060 */
+ u8 fc_spdproductname15; /* 0x1061 */
+ u8 fc_spddeviceinf; /* 0x1062 */
+ u8 fc_audsconf; /* 0x1063 */
+ u8 fc_audsstat; /* 0x1064 */
+ u8 reserved7[0xb];
+ u8 fc_datach0fill; /* 0x1070 */
+ u8 fc_datach1fill; /* 0x1071 */
+ u8 fc_datach2fill; /* 0x1072 */
+ u8 fc_ctrlqhigh; /* 0x1073 */
+ u8 fc_ctrlqlow; /* 0x1074 */
+ u8 fc_acp0; /* 0x1075 */
+ u8 fc_acp28; /* 0x1076 */
+ u8 fc_acp27; /* 0x1077 */
+ u8 fc_acp26; /* 0x1078 */
+ u8 fc_acp25; /* 0x1079 */
+ u8 fc_acp24; /* 0x107a */
+ u8 fc_acp23; /* 0x107b */
+ u8 fc_acp22; /* 0x107c */
+ u8 fc_acp21; /* 0x107d */
+ u8 fc_acp20; /* 0x107e */
+ u8 fc_acp19; /* 0x107f */
+ u8 fc_acp18; /* 0x1080 */
+ u8 fc_acp17; /* 0x1081 */
+ u8 fc_acp16; /* 0x1082 */
+ u8 fc_acp15; /* 0x1083 */
+ u8 fc_acp14; /* 0x1084 */
+ u8 fc_acp13; /* 0x1085 */
+ u8 fc_acp12; /* 0x1086 */
+ u8 fc_acp11; /* 0x1087 */
+ u8 fc_acp10; /* 0x1088 */
+ u8 fc_acp9; /* 0x1089 */
+ u8 fc_acp8; /* 0x108a */
+ u8 fc_acp7; /* 0x108b */
+ u8 fc_acp6; /* 0x108c */
+ u8 fc_acp5; /* 0x108d */
+ u8 fc_acp4; /* 0x108e */
+ u8 fc_acp3; /* 0x108f */
+ u8 fc_acp2; /* 0x1090 */
+ u8 fc_acp1; /* 0x1091 */
+ u8 fc_iscr1_0; /* 0x1092 */
+ u8 fc_iscr1_16; /* 0x1093 */
+ u8 fc_iscr1_15; /* 0x1094 */
+ u8 fc_iscr1_14; /* 0x1095 */
+ u8 fc_iscr1_13; /* 0x1096 */
+ u8 fc_iscr1_12; /* 0x1097 */
+ u8 fc_iscr1_11; /* 0x1098 */
+ u8 fc_iscr1_10; /* 0x1099 */
+ u8 fc_iscr1_9; /* 0x109a */
+ u8 fc_iscr1_8; /* 0x109b */
+ u8 fc_iscr1_7; /* 0x109c */
+ u8 fc_iscr1_6; /* 0x109d */
+ u8 fc_iscr1_5; /* 0x109e */
+ u8 fc_iscr1_4; /* 0x109f */
+ u8 fc_iscr1_3; /* 0x10a0 */
+ u8 fc_iscr1_2; /* 0x10a1 */
+ u8 fc_iscr1_1; /* 0x10a2 */
+ u8 fc_iscr2_15; /* 0x10a3 */
+ u8 fc_iscr2_14; /* 0x10a4 */
+ u8 fc_iscr2_13; /* 0x10a5 */
+ u8 fc_iscr2_12; /* 0x10a6 */
+ u8 fc_iscr2_11; /* 0x10a7 */
+ u8 fc_iscr2_10; /* 0x10a8 */
+ u8 fc_iscr2_9; /* 0x10a9 */
+ u8 fc_iscr2_8; /* 0x10aa */
+ u8 fc_iscr2_7; /* 0x10ab */
+ u8 fc_iscr2_6; /* 0x10ac */
+ u8 fc_iscr2_5; /* 0x10ad */
+ u8 fc_iscr2_4; /* 0x10ae */
+ u8 fc_iscr2_3; /* 0x10af */
+ u8 fc_iscr2_2; /* 0x10b0 */
+ u8 fc_iscr2_1; /* 0x10b1 */
+ u8 fc_iscr2_0; /* 0x10b2 */
+ u8 fc_datauto0; /* 0x10b3 */
+ u8 fc_datauto1; /* 0x10b4 */
+ u8 fc_datauto2; /* 0x10b5 */
+ u8 fc_datman; /* 0x10b6 */
+ u8 fc_datauto3; /* 0x10b7 */
+ u8 fc_rdrb0; /* 0x10b8 */
+ u8 fc_rdrb1; /* 0x10b9 */
+ u8 fc_rdrb2; /* 0x10ba */
+ u8 fc_rdrb3; /* 0x10bb */
+ u8 fc_rdrb4; /* 0x10bc */
+ u8 fc_rdrb5; /* 0x10bd */
+ u8 fc_rdrb6; /* 0x10be */
+ u8 fc_rdrb7; /* 0x10bf */
+ u8 reserved8[0x10];
+ u8 fc_stat0; /* 0x10d0 */
+ u8 fc_int0; /* 0x10d1 */
+ u8 fc_mask0; /* 0x10d2 */
+ u8 fc_pol0; /* 0x10d3 */
+ u8 fc_stat1; /* 0x10d4 */
+ u8 fc_int1; /* 0x10d5 */
+ u8 fc_mask1; /* 0x10d6 */
+ u8 fc_pol1; /* 0x10d7 */
+ u8 fc_stat2; /* 0x10d8 */
+ u8 fc_int2; /* 0x10d9 */
+ u8 fc_mask2; /* 0x10da */
+ u8 fc_pol2; /* 0x10db */
+ u8 reserved9[0x4];
+ u8 fc_prconf; /* 0x10e0 */
+ u8 reserved10[0x1f];
+ u8 fc_gmd_stat; /* 0x1100 */
+ u8 fc_gmd_en; /* 0x1101 */
+ u8 fc_gmd_up; /* 0x1102 */
+ u8 fc_gmd_conf; /* 0x1103 */
+ u8 fc_gmd_hb; /* 0x1104 */
+ u8 fc_gmd_pb0; /* 0x1105 */
+ u8 fc_gmd_pb1; /* 0x1106 */
+ u8 fc_gmd_pb2; /* 0x1107 */
+ u8 fc_gmd_pb3; /* 0x1108 */
+ u8 fc_gmd_pb4; /* 0x1109 */
+ u8 fc_gmd_pb5; /* 0x110a */
+ u8 fc_gmd_pb6; /* 0x110b */
+ u8 fc_gmd_pb7; /* 0x110c */
+ u8 fc_gmd_pb8; /* 0x110d */
+ u8 fc_gmd_pb9; /* 0x110e */
+ u8 fc_gmd_pb10; /* 0x110f */
+ u8 fc_gmd_pb11; /* 0x1110 */
+ u8 fc_gmd_pb12; /* 0x1111 */
+ u8 fc_gmd_pb13; /* 0x1112 */
+ u8 fc_gmd_pb14; /* 0x1113 */
+ u8 fc_gmd_pb15; /* 0x1114 */
+ u8 fc_gmd_pb16; /* 0x1115 */
+ u8 fc_gmd_pb17; /* 0x1116 */
+ u8 fc_gmd_pb18; /* 0x1117 */
+ u8 fc_gmd_pb19; /* 0x1118 */
+ u8 fc_gmd_pb20; /* 0x1119 */
+ u8 fc_gmd_pb21; /* 0x111a */
+ u8 fc_gmd_pb22; /* 0x111b */
+ u8 fc_gmd_pb23; /* 0x111c */
+ u8 fc_gmd_pb24; /* 0x111d */
+ u8 fc_gmd_pb25; /* 0x111e */
+ u8 fc_gmd_pb26; /* 0x111f */
+ u8 fc_gmd_pb27; /* 0x1120 */
+ u8 reserved11[0xdf];
+ u8 fc_dbgforce; /* 0x1200 */
+ u8 fc_dbgaud0ch0; /* 0x1201 */
+ u8 fc_dbgaud1ch0; /* 0x1202 */
+ u8 fc_dbgaud2ch0; /* 0x1203 */
+ u8 fc_dbgaud0ch1; /* 0x1204 */
+ u8 fc_dbgaud1ch1; /* 0x1205 */
+ u8 fc_dbgaud2ch1; /* 0x1206 */
+ u8 fc_dbgaud0ch2; /* 0x1207 */
+ u8 fc_dbgaud1ch2; /* 0x1208 */
+ u8 fc_dbgaud2ch2; /* 0x1209 */
+ u8 fc_dbgaud0ch3; /* 0x120a */
+ u8 fc_dbgaud1ch3; /* 0x120b */
+ u8 fc_dbgaud2ch3; /* 0x120c */
+ u8 fc_dbgaud0ch4; /* 0x120d */
+ u8 fc_dbgaud1ch4; /* 0x120e */
+ u8 fc_dbgaud2ch4; /* 0x120f */
+ u8 fc_dbgaud0ch5; /* 0x1210 */
+ u8 fc_dbgaud1ch5; /* 0x1211 */
+ u8 fc_dbgaud2ch5; /* 0x1212 */
+ u8 fc_dbgaud0ch6; /* 0x1213 */
+ u8 fc_dbgaud1ch6; /* 0x1214 */
+ u8 fc_dbgaud2ch6; /* 0x1215 */
+ u8 fc_dbgaud0ch7; /* 0x1216 */
+ u8 fc_dbgaud1ch7; /* 0x1217 */
+ u8 fc_dbgaud2ch7; /* 0x1218 */
+ u8 fc_dbgtmds0; /* 0x1219 */
+ u8 fc_dbgtmds1; /* 0x121a */
+ u8 fc_dbgtmds2; /* 0x121b */
+ u8 reserved12[0x1de4];
+ /* Hdmi Source Phy Registers */
+ u8 phy_conf0; /* 0x3000 */
+ u8 phy_tst0; /* 0x3001 */
+ u8 phy_tst1; /* 0x3002 */
+ u8 phy_tst2; /* 0x3003 */
+ u8 phy_stat0; /* 0x3004 */
+ u8 phy_int0; /* 0x3005 */
+ u8 phy_mask0; /* 0x3006 */
+ u8 phy_pol0; /* 0x3007 */
+ u8 reserved13[0x18];
+ /* Hdmi Master Phy Registers */
+ u8 phy_i2cm_slave_addr; /* 0x3020 */
+ u8 phy_i2cm_address_addr; /* 0x3021 */
+ u8 phy_i2cm_datao_1_addr; /* 0x3022 */
+ u8 phy_i2cm_datao_0_addr; /* 0x3023 */
+ u8 phy_i2cm_datai_1_addr; /* 0x3024 */
+ u8 phy_i2cm_datai_0_addr; /* 0x3025 */
+ u8 phy_i2cm_operation_addr; /* 0x3026 */
+ u8 phy_i2cm_int_addr; /* 0x3027 */
+ u8 phy_i2cm_ctlint_addr; /* 0x3028 */
+ u8 phy_i2cm_div_addr; /* 0x3029 */
+ u8 phy_i2cm_softrstz_addr; /* 0x302a */
+ u8 phy_i2cm_ss_scl_hcnt_1_addr; /* 0x302b */
+ u8 phy_i2cm_ss_scl_hcnt_0_addr; /* 0x302c */
+ u8 phy_i2cm_ss_scl_lcnt_1_addr; /* 0x302d */
+ u8 phy_i2cm_ss_scl_lcnt_0_addr; /* 0x302e */
+ u8 phy_i2cm_fs_scl_hcnt_1_addr; /* 0x302f */
+ u8 phy_i2cm_fs_scl_hcnt_0_addr; /* 0x3030 */
+ u8 phy_i2cm_fs_scl_lcnt_1_addr; /* 0x3031 */
+ u8 phy_i2cm_fs_scl_lcnt_0_addr; /* 0x3032 */
+ u8 reserved14[0xcd];
+ /* Audio Sampler Registers */
+ u8 aud_conf0; /* 0x3100 */
+ u8 aud_conf1; /* 0x3101 */
+ u8 aud_int; /* 0x3102 */
+ u8 aud_conf2; /* 0x3103 */
+ u8 reserved15[0xfc];
+ u8 aud_n1; /* 0x3200 */
+ u8 aud_n2; /* 0x3201 */
+ u8 aud_n3; /* 0x3202 */
+ u8 aud_cts1; /* 0x3203 */
+ u8 aud_cts2; /* 0x3204 */
+ u8 aud_cts3; /* 0x3205 */
+ u8 aud_inputclkfs; /* 0x3206 */
+ u8 reserved16[0xfb];
+ u8 aud_spdifint; /* 0x3302 */
+ u8 reserved17[0xfd];
+ u8 aud_conf0_hbr; /* 0x3400 */
+ u8 aud_hbr_status; /* 0x3401 */
+ u8 aud_hbr_int; /* 0x3402 */
+ u8 aud_hbr_pol; /* 0x3403 */
+ u8 aud_hbr_mask; /* 0x3404 */
+ u8 reserved18[0xfb];
+ /*
+ * Generic Parallel Audio Interface Registers
+ * Not used as GPAUD interface is not enabled in hw
+ */
+ u8 gp_conf0; /* 0x3500 */
+ u8 gp_conf1; /* 0x3501 */
+ u8 gp_conf2; /* 0x3502 */
+ u8 gp_stat; /* 0x3503 */
+ u8 gp_int; /* 0x3504 */
+ u8 gp_mask; /* 0x3505 */
+ u8 gp_pol; /* 0x3506 */
+ u8 reserved19[0xf9];
+ /* Audio DMA Registers */
+ u8 ahb_dma_conf0; /* 0x3600 */
+ u8 ahb_dma_start; /* 0x3601 */
+ u8 ahb_dma_stop; /* 0x3602 */
+ u8 ahb_dma_thrsld; /* 0x3603 */
+ u8 ahb_dma_straddr0; /* 0x3604 */
+ u8 ahb_dma_straddr1; /* 0x3605 */
+ u8 ahb_dma_straddr2; /* 0x3606 */
+ u8 ahb_dma_straddr3; /* 0x3607 */
+ u8 ahb_dma_stpaddr0; /* 0x3608 */
+ u8 ahb_dma_stpaddr1; /* 0x3609 */
+ u8 ahb_dma_stpaddr2; /* 0x360a */
+ u8 ahb_dma_stpaddr3; /* 0x360b */
+ u8 ahb_dma_bstaddr0; /* 0x360c */
+ u8 ahb_dma_bstaddr1; /* 0x360d */
+ u8 ahb_dma_bstaddr2; /* 0x360e */
+ u8 ahb_dma_bstaddr3; /* 0x360f */
+ u8 ahb_dma_mblength0; /* 0x3610 */
+ u8 ahb_dma_mblength1; /* 0x3611 */
+ u8 ahb_dma_stat; /* 0x3612 */
+ u8 ahb_dma_int; /* 0x3613 */
+ u8 ahb_dma_mask; /* 0x3614 */
+ u8 ahb_dma_pol; /* 0x3615 */
+ u8 ahb_dma_conf1; /* 0x3616 */
+ u8 ahb_dma_buffstat; /* 0x3617 */
+ u8 ahb_dma_buffint; /* 0x3618 */
+ u8 ahb_dma_buffmask; /* 0x3619 */
+ u8 ahb_dma_buffpol; /* 0x361a */
+ u8 reserved20[0x9e5];
+ /* Main Controller Registers */
+ u8 mc_sfrdiv; /* 0x4000 */
+ u8 mc_clkdis; /* 0x4001 */
+ u8 mc_swrstz; /* 0x4002 */
+ u8 mc_opctrl; /* 0x4003 */
+ u8 mc_flowctrl; /* 0x4004 */
+ u8 mc_phyrstz; /* 0x4005 */
+ u8 mc_lockonclock; /* 0x4006 */
+ u8 mc_heacphy_rst; /* 0x4007 */
+ u8 reserved21[0xf8];
+ /* Colorspace Converter Registers */
+ u8 csc_cfg; /* 0x4100 */
+ u8 csc_scale; /* 0x4101 */
+ u8 csc_coef_a1_msb; /* 0x4102 */
+ u8 csc_coef_a1_lsb; /* 0x4103 */
+ u8 csc_coef_a2_msb; /* 0x4104 */
+ u8 csc_coef_a2_lsb; /* 0x4105 */
+ u8 csc_coef_a3_msb; /* 0x4106 */
+ u8 csc_coef_a3_lsb; /* 0x4107 */
+ u8 csc_coef_a4_msb; /* 0x4108 */
+ u8 csc_coef_a4_lsb; /* 0x4109 */
+ u8 csc_coef_b1_msb; /* 0x410a */
+ u8 csc_coef_b1_lsb; /* 0x410b */
+ u8 csc_coef_b2_msb; /* 0x410c */
+ u8 csc_coef_b2_lsb; /* 0x410d */
+ u8 csc_coef_b3_msb; /* 0x410e */
+ u8 csc_coef_b3_lsb; /* 0x410f */
+ u8 csc_coef_b4_msb; /* 0x4110 */
+ u8 csc_coef_b4_lsb; /* 0x4111 */
+ u8 csc_coef_c1_msb; /* 0x4112 */
+ u8 csc_coef_c1_lsb; /* 0x4113 */
+ u8 csc_coef_c2_msb; /* 0x4114 */
+ u8 csc_coef_c2_lsb; /* 0x4115 */
+ u8 csc_coef_c3_msb; /* 0x4116 */
+ u8 csc_coef_c3_lsb; /* 0x4117 */
+ u8 csc_coef_c4_msb; /* 0x4118 */
+ u8 csc_coef_c4_lsb; /* 0x4119 */
+ u8 reserved22[0xee6];
+ /* HDCP Encryption Engine Registers */
+ u8 a_hdcpcfg0; /* 0x5000 */
+ u8 a_hdcpcfg1; /* 0x5001 */
+ u8 a_hdcpobs0; /* 0x5002 */
+ u8 a_hdcpobs1; /* 0x5003 */
+ u8 a_hdcpobs2; /* 0x5004 */
+ u8 a_hdcpobs3; /* 0x5005 */
+ u8 a_apiintclr; /* 0x5006 */
+ u8 a_apiintstat; /* 0x5007 */
+ u8 a_apiintmsk; /* 0x5008 */
+ u8 a_vidpolcfg; /* 0x5009 */
+ u8 a_oesswcfg; /* 0x500a */
+ u8 a_timer1setup0; /* 0x500b */
+ u8 a_timer1setup1; /* 0x500c */
+ u8 a_timer2setup0; /* 0x500d */
+ u8 a_timer2setup1; /* 0x500e */
+ u8 a_100mscfg; /* 0x500f */
+ u8 a_2scfg0; /* 0x5010 */
+ u8 a_2scfg1; /* 0x5011 */
+ u8 a_5scfg0; /* 0x5012 */
+ u8 a_5scfg1; /* 0x5013 */
+ u8 a_srmverlsb; /* 0x5014 */
+ u8 a_srmvermsb; /* 0x5015 */
+ u8 a_srmctrl; /* 0x5016 */
+ u8 a_sfrsetup; /* 0x5017 */
+ u8 a_i2chsetup; /* 0x5018 */
+ u8 a_intsetup; /* 0x5019 */
+ u8 a_presetup; /* 0x501a */
+ u8 reserved23[0x5];
+ u8 a_srm_base; /* 0x5020 */
+ u8 reserved24[0x2cdf];
+ /* CEC Engine Registers */
+ u8 cec_ctrl; /* 0x7d00 */
+ u8 cec_stat; /* 0x7d01 */
+ u8 cec_mask; /* 0x7d02 */
+ u8 cec_polarity; /* 0x7d03 */
+ u8 cec_int; /* 0x7d04 */
+ u8 cec_addr_l; /* 0x7d05 */
+ u8 cec_addr_h; /* 0x7d06 */
+ u8 cec_tx_cnt; /* 0x7d07 */
+ u8 cec_rx_cnt; /* 0x7d08 */
+ u8 reserved25[0x7];
+ u8 cec_tx_data0; /* 0x7d10 */
+ u8 cec_tx_data1; /* 0x7d11 */
+ u8 cec_tx_data2; /* 0x7d12 */
+ u8 cec_tx_data3; /* 0x7d13 */
+ u8 cec_tx_data4; /* 0x7d14 */
+ u8 cec_tx_data5; /* 0x7d15 */
+ u8 cec_tx_data6; /* 0x7d16 */
+ u8 cec_tx_data7; /* 0x7d17 */
+ u8 cec_tx_data8; /* 0x7d18 */
+ u8 cec_tx_data9; /* 0x7d19 */
+ u8 cec_tx_data10; /* 0x7d1a */
+ u8 cec_tx_data11; /* 0x7d1b */
+ u8 cec_tx_data12; /* 0x7d1c */
+ u8 cec_tx_data13; /* 0x7d1d */
+ u8 cec_tx_data14; /* 0x7d1e */
+ u8 cec_tx_data15; /* 0x7d1f */
+ u8 cec_rx_data0; /* 0x7d20 */
+ u8 cec_rx_data1; /* 0x7d21 */
+ u8 cec_rx_data2; /* 0x7d22 */
+ u8 cec_rx_data3; /* 0x7d23 */
+ u8 cec_rx_data4; /* 0x7d24 */
+ u8 cec_rx_data5; /* 0x7d25 */
+ u8 cec_rx_data6; /* 0x7d26 */
+ u8 cec_rx_data7; /* 0x7d27 */
+ u8 cec_rx_data8; /* 0x7d28 */
+ u8 cec_rx_data9; /* 0x7d29 */
+ u8 cec_rx_data10; /* 0x7d2a */
+ u8 cec_rx_data11; /* 0x7d2b */
+ u8 cec_rx_data12; /* 0x7d2c */
+ u8 cec_rx_data13; /* 0x7d2d */
+ u8 cec_rx_data14; /* 0x7d2e */
+ u8 cec_rx_data15; /* 0x7d2f */
+ u8 cec_lock; /* 0x7d30 */
+ u8 cec_wkupctrl; /* 0x7d31 */
+ u8 reserved26[0xce];
+ /* I2C Master Registers (E-DDC) */
+ u8 i2cm_slave; /* 0x7e00 */
+ u8 i2cmess; /* 0x7e01 */
+ u8 i2cm_datao; /* 0x7e02 */
+ u8 i2cm_datai; /* 0x7e03 */
+ u8 i2cm_operation; /* 0x7e04 */
+ u8 i2cm_int; /* 0x7e05 */
+ u8 i2cm_ctlint; /* 0x7e06 */
+ u8 i2cm_div; /* 0x7e07 */
+ u8 i2cm_segaddr; /* 0x7e08 */
+ u8 i2cm_softrstz; /* 0x7e09 */
+ u8 i2cm_segptr; /* 0x7e0a */
+ u8 i2cm_ss_scl_hcnt_1_addr; /* 0x7e0b */
+ u8 i2cm_ss_scl_hcnt_0_addr; /* 0x7e0c */
+ u8 i2cm_ss_scl_lcnt_1_addr; /* 0x7e0d */
+ u8 i2cm_ss_scl_lcnt_0_addr; /* 0x7e0e */
+ u8 i2cm_fs_scl_hcnt_1_addr; /* 0x7e0f */
+ u8 i2cm_fs_scl_hcnt_0_addr; /* 0x7e10 */
+ u8 i2cm_fs_scl_lcnt_1_addr; /* 0x7e11 */
+ u8 i2cm_fs_scl_lcnt_0_addr; /* 0x7e12 */
+ u8 reserved27[0x1ed];
+ /* Random Number Generator Registers (RNG) */
+ u8 rng_base; /* 0x8000 */
+};
/*
* Register field definitions
diff --git a/arch/arm/include/asm/arch-mxs/dma.h b/arch/arm/include/asm/arch-mxs/dma.h
index a0a0ea5..1ac8696 100644
--- a/arch/arm/include/asm/arch-mxs/dma.h
+++ b/arch/arm/include/asm/arch-mxs/dma.h
@@ -40,6 +40,19 @@
/*
* MXS DMA channels
*/
+#if defined(CONFIG_MX23)
+enum {
+ MXS_DMA_CHANNEL_AHB_APBH_LCDIF = 0,
+ MXS_DMA_CHANNEL_AHB_APBH_SSP0,
+ MXS_DMA_CHANNEL_AHB_APBH_SSP1,
+ MXS_DMA_CHANNEL_AHB_APBH_RESERVED0,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI0,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI1,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI2,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI3,
+ MXS_MAX_DMA_CHANNELS,
+};
+#elif defined(CONFIG_MX28)
enum {
MXS_DMA_CHANNEL_AHB_APBH_SSP0 = 0,
MXS_DMA_CHANNEL_AHB_APBH_SSP1,
@@ -53,9 +66,13 @@ enum {
MXS_DMA_CHANNEL_AHB_APBH_GPMI5,
MXS_DMA_CHANNEL_AHB_APBH_GPMI6,
MXS_DMA_CHANNEL_AHB_APBH_GPMI7,
- MXS_DMA_CHANNEL_AHB_APBH_SSP,
+ MXS_DMA_CHANNEL_AHB_APBH_HSADC,
+ MXS_DMA_CHANNEL_AHB_APBH_LCDIF,
+ MXS_DMA_CHANNEL_AHB_APBH_RESERVED0,
+ MXS_DMA_CHANNEL_AHB_APBH_RESERVED1,
MXS_MAX_DMA_CHANNELS,
};
+#endif
/*
* MXS DMA hardware command.
diff --git a/arch/arm/include/asm/arch-mxs/imx-regs.h b/arch/arm/include/asm/arch-mxs/imx-regs.h
index 05eb63c..8f67497 100644
--- a/arch/arm/include/asm/arch-mxs/imx-regs.h
+++ b/arch/arm/include/asm/arch-mxs/imx-regs.h
@@ -36,6 +36,8 @@
#include <asm/arch/regs-rtc.h>
#include <asm/arch/regs-ssp.h>
#include <asm/arch/regs-timrot.h>
+#include <asm/arch/regs-usb.h>
+#include <asm/arch/regs-usbphy.h>
#ifdef CONFIG_MX23
#include <asm/arch/regs-clkctrl-mx23.h>
diff --git a/arch/arm/include/asm/arch-mxs/iomux.h b/arch/arm/include/asm/arch-mxs/iomux.h
index 7abdf58..4288715 100644
--- a/arch/arm/include/asm/arch-mxs/iomux.h
+++ b/arch/arm/include/asm/arch-mxs/iomux.h
@@ -21,6 +21,10 @@
#ifndef __MACH_MXS_IOMUX_H__
#define __MACH_MXS_IOMUX_H__
+#ifndef __ASSEMBLY__
+
+#include <asm/types.h>
+
/*
* IOMUX/PAD Bit field definitions
*
@@ -165,4 +169,5 @@ int mxs_iomux_setup_pad(iomux_cfg_t pad);
*/
int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count);
+#endif /* __ASSEMBLY__ */
#endif /* __MACH_MXS_IOMUX_H__*/
diff --git a/arch/arm/include/asm/arch-mxs/regs-ssp.h b/arch/arm/include/asm/arch-mxs/regs-ssp.h
index 9b30f56..5920f9b 100644
--- a/arch/arm/include/asm/arch-mxs/regs-ssp.h
+++ b/arch/arm/include/asm/arch-mxs/regs-ssp.h
@@ -74,6 +74,32 @@ struct mxs_ssp_regs {
};
#endif
+static inline int mxs_ssp_bus_id_valid(int bus)
+{
+#if defined(CONFIG_MX23)
+ const unsigned int mxs_ssp_chan_count = 2;
+#elif defined(CONFIG_MX28)
+ const unsigned int mxs_ssp_chan_count = 4;
+#endif
+
+ if (bus >= mxs_ssp_chan_count)
+ return 0;
+
+ if (bus < 0)
+ return 0;
+
+ return 1;
+}
+
+static inline int mxs_ssp_clock_by_bus(unsigned int clock)
+{
+#if defined(CONFIG_MX23)
+ return 0;
+#elif defined(CONFIG_MX28)
+ return clock;
+#endif
+}
+
static inline struct mxs_ssp_regs *mxs_ssp_regs_by_bus(unsigned int port)
{
switch (port) {
diff --git a/arch/arm/include/asm/arch-mxs/regs-timrot.h b/arch/arm/include/asm/arch-mxs/regs-timrot.h
index 529a3bc..f8537f1 100644
--- a/arch/arm/include/asm/arch-mxs/regs-timrot.h
+++ b/arch/arm/include/asm/arch-mxs/regs-timrot.h
@@ -31,6 +31,16 @@
struct mxs_timrot_regs {
mxs_reg_32(hw_timrot_rotctrl)
mxs_reg_32(hw_timrot_rotcount)
+#if defined(CONFIG_MX23)
+ mxs_reg_32(hw_timrot_timctrl0)
+ mxs_reg_32(hw_timrot_timcount0)
+ mxs_reg_32(hw_timrot_timctrl1)
+ mxs_reg_32(hw_timrot_timcount1)
+ mxs_reg_32(hw_timrot_timctrl2)
+ mxs_reg_32(hw_timrot_timcount2)
+ mxs_reg_32(hw_timrot_timctrl3)
+ mxs_reg_32(hw_timrot_timcount3)
+#elif defined(CONFIG_MX28)
mxs_reg_32(hw_timrot_timctrl0)
mxs_reg_32(hw_timrot_running_count0)
mxs_reg_32(hw_timrot_fixed_count0)
@@ -47,6 +57,7 @@ struct mxs_timrot_regs {
mxs_reg_32(hw_timrot_running_count3)
mxs_reg_32(hw_timrot_fixed_count3)
mxs_reg_32(hw_timrot_match_count3)
+#endif
mxs_reg_32(hw_timrot_version)
};
#endif
@@ -71,7 +82,11 @@ struct mxs_timrot_regs {
#define TIMROT_ROTCTRL_OVERSAMPLE_1X (0x3 << 10)
#define TIMROT_ROTCTRL_POLARITY_B (1 << 9)
#define TIMROT_ROTCTRL_POLARITY_A (1 << 8)
+#if defined(CONFIG_MX23)
+#define TIMROT_ROTCTRL_SELECT_B_MASK (0x7 << 4)
+#elif defined(CONFIG_MX28)
#define TIMROT_ROTCTRL_SELECT_B_MASK (0xf << 4)
+#endif
#define TIMROT_ROTCTRL_SELECT_B_OFFSET 4
#define TIMROT_ROTCTRL_SELECT_B_NEVER_TICK (0x0 << 4)
#define TIMROT_ROTCTRL_SELECT_B_PWM0 (0x1 << 4)
@@ -79,12 +94,21 @@ struct mxs_timrot_regs {
#define TIMROT_ROTCTRL_SELECT_B_PWM2 (0x3 << 4)
#define TIMROT_ROTCTRL_SELECT_B_PWM3 (0x4 << 4)
#define TIMROT_ROTCTRL_SELECT_B_PWM4 (0x5 << 4)
+#if defined(CONFIG_MX23)
+#define TIMROT_ROTCTRL_SELECT_B_ROTARYA (0x6 << 4)
+#define TIMROT_ROTCTRL_SELECT_B_ROTARYB (0x7 << 4)
+#elif defined(CONFIG_MX28)
#define TIMROT_ROTCTRL_SELECT_B_PWM5 (0x6 << 4)
#define TIMROT_ROTCTRL_SELECT_B_PWM6 (0x7 << 4)
#define TIMROT_ROTCTRL_SELECT_B_PWM7 (0x8 << 4)
#define TIMROT_ROTCTRL_SELECT_B_ROTARYA (0x9 << 4)
#define TIMROT_ROTCTRL_SELECT_B_ROTARYB (0xa << 4)
+#endif
+#if defined(CONFIG_MX23)
+#define TIMROT_ROTCTRL_SELECT_A_MASK 0x7
+#elif defined(CONFIG_MX28)
#define TIMROT_ROTCTRL_SELECT_A_MASK 0xf
+#endif
#define TIMROT_ROTCTRL_SELECT_A_OFFSET 0
#define TIMROT_ROTCTRL_SELECT_A_NEVER_TICK 0x0
#define TIMROT_ROTCTRL_SELECT_A_PWM0 0x1
@@ -92,18 +116,25 @@ struct mxs_timrot_regs {
#define TIMROT_ROTCTRL_SELECT_A_PWM2 0x3
#define TIMROT_ROTCTRL_SELECT_A_PWM3 0x4
#define TIMROT_ROTCTRL_SELECT_A_PWM4 0x5
+#if defined(CONFIG_MX23)
+#define TIMROT_ROTCTRL_SELECT_A_ROTARYA 0x6
+#define TIMROT_ROTCTRL_SELECT_A_ROTARYB 0x7
+#elif defined(CONFIG_MX28)
#define TIMROT_ROTCTRL_SELECT_A_PWM5 0x6
#define TIMROT_ROTCTRL_SELECT_A_PWM6 0x7
#define TIMROT_ROTCTRL_SELECT_A_PWM7 0x8
#define TIMROT_ROTCTRL_SELECT_A_ROTARYA 0x9
#define TIMROT_ROTCTRL_SELECT_A_ROTARYB 0xa
+#endif
#define TIMROT_ROTCOUNT_UPDOWN_MASK 0xffff
#define TIMROT_ROTCOUNT_UPDOWN_OFFSET 0
#define TIMROT_TIMCTRLn_IRQ (1 << 15)
#define TIMROT_TIMCTRLn_IRQ_EN (1 << 14)
+#if defined(CONFIG_MX28)
#define TIMROT_TIMCTRLn_MATCH_MODE (1 << 11)
+#endif
#define TIMROT_TIMCTRLn_POLARITY (1 << 8)
#define TIMROT_TIMCTRLn_UPDATE (1 << 7)
#define TIMROT_TIMCTRLn_RELOAD (1 << 6)
@@ -121,6 +152,15 @@ struct mxs_timrot_regs {
#define TIMROT_TIMCTRLn_SELECT_PWM2 0x3
#define TIMROT_TIMCTRLn_SELECT_PWM3 0x4
#define TIMROT_TIMCTRLn_SELECT_PWM4 0x5
+#if defined(CONFIG_MX23)
+#define TIMROT_TIMCTRLn_SELECT_ROTARYA 0x6
+#define TIMROT_TIMCTRLn_SELECT_ROTARYB 0x7
+#define TIMROT_TIMCTRLn_SELECT_32KHZ_XTAL 0x8
+#define TIMROT_TIMCTRLn_SELECT_8KHZ_XTAL 0x9
+#define TIMROT_TIMCTRLn_SELECT_4KHZ_XTAL 0xa
+#define TIMROT_TIMCTRLn_SELECT_1KHZ_XTAL 0xb
+#define TIMROT_TIMCTRLn_SELECT_TICK_ALWAYS 0xc
+#elif defined(CONFIG_MX28)
#define TIMROT_TIMCTRLn_SELECT_PWM5 0x6
#define TIMROT_TIMCTRLn_SELECT_PWM6 0x7
#define TIMROT_TIMCTRLn_SELECT_PWM7 0x8
@@ -131,15 +171,28 @@ struct mxs_timrot_regs {
#define TIMROT_TIMCTRLn_SELECT_4KHZ_XTAL 0xd
#define TIMROT_TIMCTRLn_SELECT_1KHZ_XTAL 0xe
#define TIMROT_TIMCTRLn_SELECT_TICK_ALWAYS 0xf
+#endif
+#if defined(CONFIG_MX23)
+#define TIMROT_RUNNING_COUNTn_RUNNING_COUNT_MASK (0xffff << 16)
+#define TIMROT_RUNNING_COUNTn_RUNNING_COUNT_OFFSET 16
+#elif defined(CONFIG_MX28)
#define TIMROT_RUNNING_COUNTn_RUNNING_COUNT_MASK 0xffffffff
#define TIMROT_RUNNING_COUNTn_RUNNING_COUNT_OFFSET 0
+#endif
+#if defined(CONFIG_MX23)
+#define TIMROT_FIXED_COUNTn_FIXED_COUNT_MASK 0xffff
+#define TIMROT_FIXED_COUNTn_FIXED_COUNT_OFFSET 0
+#elif defined(CONFIG_MX28)
#define TIMROT_FIXED_COUNTn_FIXED_COUNT_MASK 0xffffffff
#define TIMROT_FIXED_COUNTn_FIXED_COUNT_OFFSET 0
+#endif
+#if defined(CONFIG_MX28)
#define TIMROT_MATCH_COUNTn_MATCH_COUNT_MASK 0xffffffff
#define TIMROT_MATCH_COUNTn_MATCH_COUNT_OFFSET 0
+#endif
#define TIMROT_TIMCTRL3_TEST_SIGNAL_MASK (0xf << 16)
#define TIMROT_TIMCTRL3_TEST_SIGNAL_OFFSET 16
@@ -149,6 +202,15 @@ struct mxs_timrot_regs {
#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM2 (0x3 << 16)
#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM3 (0x4 << 16)
#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM4 (0x5 << 16)
+#if defined(CONFIG_MX23)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_ROTARYA (0x6 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_ROTARYB (0x7 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_32KHZ_XTAL (0x8 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_8KHZ_XTAL (0x9 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_4KHZ_XTAL (0xa << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_1KHZ_XTAL (0xb << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_TICK_ALWAYS (0xc << 16)
+#elif defined(CONFIG_MX28)
#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM5 (0x6 << 16)
#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM6 (0x7 << 16)
#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM7 (0x8 << 16)
@@ -159,7 +221,46 @@ struct mxs_timrot_regs {
#define TIMROT_TIMCTRL3_TEST_SIGNAL_4KHZ_XTAL (0xd << 16)
#define TIMROT_TIMCTRL3_TEST_SIGNAL_1KHZ_XTAL (0xe << 16)
#define TIMROT_TIMCTRL3_TEST_SIGNAL_TICK_ALWAYS (0xf << 16)
+#endif
+#if defined(CONFIG_MX23)
+#define TIMROT_TIMCTRL3_IRQ (1 << 15)
+#define TIMROT_TIMCTRL3_IRQ_EN (1 << 14)
+#define TIMROT_TIMCTRL3_DUTU_VALID (1 << 10)
+#endif
#define TIMROT_TIMCTRL3_DUTY_CYCLE (1 << 9)
+#if defined(CONFIG_MX23)
+#define TIMROT_TIMCTRL3_POLARITY_MASK (0x1 << 8)
+#define TIMROT_TIMCTRL3_POLARITY_OFFSET 8
+#define TIMROT_TIMCTRL3_POLARITY_POSITIVE (0x0 << 8)
+#define TIMROT_TIMCTRL3_POLARITY_NEGATIVE (0x1 << 8)
+#define TIMROT_TIMCTRL3_UPDATE (1 << 7)
+#define TIMROT_TIMCTRL3_RELOAD (1 << 6)
+#define TIMROT_TIMCTRL3_PRESCALE_MASK (0x3 << 4)
+#define TIMROT_TIMCTRL3_PRESCALE_OFFSET 4
+#define TIMROT_TIMCTRL3_PRESCALE_DIV_BY_1 (0x0 << 4)
+#define TIMROT_TIMCTRL3_PRESCALE_DIV_BY_2 (0x1 << 4)
+#define TIMROT_TIMCTRL3_PRESCALE_DIV_BY_4 (0x2 << 4)
+#define TIMROT_TIMCTRL3_PRESCALE_DIV_BY_8 (0x3 << 4)
+#define TIMROT_TIMCTRL3_SELECT_MASK 0xf
+#define TIMROT_TIMCTRL3_SELECT_OFFSET 0
+#define TIMROT_TIMCTRL3_SELECT_NEVER_TICK 0x0
+#define TIMROT_TIMCTRL3_SELECT_PWM0 0x1
+#define TIMROT_TIMCTRL3_SELECT_PWM1 0x2
+#define TIMROT_TIMCTRL3_SELECT_PWM2 0x3
+#define TIMROT_TIMCTRL3_SELECT_PWM3 0x4
+#define TIMROT_TIMCTRL3_SELECT_PWM4 0x5
+#define TIMROT_TIMCTRL3_SELECT_ROTARYA 0x6
+#define TIMROT_TIMCTRL3_SELECT_ROTARYB 0x7
+#define TIMROT_TIMCTRL3_SELECT_32KHZ_XTAL 0x8
+#define TIMROT_TIMCTRL3_SELECT_8KHZ_XTAL 0x9
+#define TIMROT_TIMCTRL3_SELECT_4KHZ_XTAL 0xa
+#define TIMROT_TIMCTRL3_SELECT_1KHZ_XTAL 0xb
+#define TIMROT_TIMCTRL3_SELECT_TICK_ALWAYS 0xc
+#define TIMROT_TIMCOUNT3_LOW_RUNNING_COUNT_MASK (0xffff << 16)
+#define TIMROT_TIMCOUNT3_LOW_RUNNING_COUNT_OFFSET 16
+#define TIMROT_TIMCOUNT3_HIGH_FIXED_COUNT_MASK 0xffff
+#define TIMROT_TIMCOUNT3_HIGH_FIXED_COUNT_OFFSET 0
+#endif
#define TIMROT_VERSION_MAJOR_MASK (0xff << 24)
#define TIMROT_VERSION_MAJOR_OFFSET 24
diff --git a/arch/arm/include/asm/arch-omap3/dss.h b/arch/arm/include/asm/arch-omap3/dss.h
index ffaffbb..ae0babf 100644
--- a/arch/arm/include/asm/arch-omap3/dss.h
+++ b/arch/arm/include/asm/arch-omap3/dss.h
@@ -167,6 +167,36 @@ struct venc_regs {
#define VENC_OUT_SEL (1 << 6)
#define DIG_LPP_SHIFT 16
+/* LCD display type */
+#define PASSIVE_DISPLAY 0
+#define ACTIVE_DISPLAY 1
+
+/* TFTDATALINES */
+#define LCD_INTERFACE_12_BIT 0
+#define LCD_INTERFACE_16_BIT 1
+#define LCD_INTERFACE_18_BIT 2
+#define LCD_INTERFACE_24_BIT 3
+
+/* Polarity */
+#define DSS_IVS (1 << 12)
+#define DSS_IHS (1 << 13)
+#define DSS_IPC (1 << 14)
+#define DSS_IEO (1 << 15)
+
+/* GFX format */
+#define GFXFORMAT_BITMAP1 (0x0 << 1)
+#define GFXFORMAT_BITMAP2 (0x1 << 1)
+#define GFXFORMAT_BITMAP4 (0x2 << 1)
+#define GFXFORMAT_BITMAP8 (0x3 << 1)
+#define GFXFORMAT_RGB12 (0x4 << 1)
+#define GFXFORMAT_ARGB16 (0x5 << 1)
+#define GFXFORMAT_RGB16 (0x6 << 1)
+#define GFXFORMAT_RGB24_UNPACKED (0x8 << 1)
+#define GFXFORMAT_RGB24_PACKED (0x9 << 1)
+#define GFXFORMAT_ARGB32 (0xC << 1)
+#define GFXFORMAT_RGBA32 (0xD << 1)
+#define GFXFORMAT_RGBx32 (0xE << 1)
+
/* Panel Configuration */
struct panel_config {
u32 timing_h;
@@ -178,6 +208,7 @@ struct panel_config {
u32 data_lines;
u32 load_mode;
u32 panel_color;
+ u32 gfx_format;
void *frame_buffer;
};
diff --git a/arch/arm/include/asm/arch-omap3/mmc_host_def.h b/arch/arm/include/asm/arch-omap3/mmc_host_def.h
index 3ce1f07..0ba621a 100644
--- a/arch/arm/include/asm/arch-omap3/mmc_host_def.h
+++ b/arch/arm/include/asm/arch-omap3/mmc_host_def.h
@@ -25,6 +25,8 @@
#ifndef MMC_HOST_DEF_H
#define MMC_HOST_DEF_H
+#include <asm/omap_mmc.h>
+
/* T2 Register definitions */
#define T2_BASE 0x48002000
@@ -59,142 +61,5 @@ typedef struct t2 {
#define OMAP_HSMMC2_BASE 0x480B4000
#define OMAP_HSMMC3_BASE 0x480AD000
-struct hsmmc {
- unsigned char res1[0x10];
- unsigned int sysconfig; /* 0x10 */
- unsigned int sysstatus; /* 0x14 */
- unsigned char res2[0x14];
- unsigned int con; /* 0x2C */
- unsigned char res3[0xD4];
- unsigned int blk; /* 0x104 */
- unsigned int arg; /* 0x108 */
- unsigned int cmd; /* 0x10C */
- unsigned int rsp10; /* 0x110 */
- unsigned int rsp32; /* 0x114 */
- unsigned int rsp54; /* 0x118 */
- unsigned int rsp76; /* 0x11C */
- unsigned int data; /* 0x120 */
- unsigned int pstate; /* 0x124 */
- unsigned int hctl; /* 0x128 */
- unsigned int sysctl; /* 0x12C */
- unsigned int stat; /* 0x130 */
- unsigned int ie; /* 0x134 */
- unsigned char res4[0x8];
- unsigned int capa; /* 0x140 */
-};
-
-/*
- * OMAP HS MMC Bit definitions
- */
-#define MMC_SOFTRESET (0x1 << 1)
-#define RESETDONE (0x1 << 0)
-#define NOOPENDRAIN (0x0 << 0)
-#define OPENDRAIN (0x1 << 0)
-#define OD (0x1 << 0)
-#define INIT_NOINIT (0x0 << 1)
-#define INIT_INITSTREAM (0x1 << 1)
-#define HR_NOHOSTRESP (0x0 << 2)
-#define STR_BLOCK (0x0 << 3)
-#define MODE_FUNC (0x0 << 4)
-#define DW8_1_4BITMODE (0x0 << 5)
-#define MIT_CTO (0x0 << 6)
-#define CDP_ACTIVEHIGH (0x0 << 7)
-#define WPP_ACTIVEHIGH (0x0 << 8)
-#define RESERVED_MASK (0x3 << 9)
-#define CTPL_MMC_SD (0x0 << 11)
-#define BLEN_512BYTESLEN (0x200 << 0)
-#define NBLK_STPCNT (0x0 << 16)
-#define DE_DISABLE (0x0 << 0)
-#define BCE_DISABLE (0x0 << 1)
-#define BCE_ENABLE (0x1 << 1)
-#define ACEN_DISABLE (0x0 << 2)
-#define DDIR_OFFSET (4)
-#define DDIR_MASK (0x1 << 4)
-#define DDIR_WRITE (0x0 << 4)
-#define DDIR_READ (0x1 << 4)
-#define MSBS_SGLEBLK (0x0 << 5)
-#define MSBS_MULTIBLK (0x1 << 5)
-#define RSP_TYPE_OFFSET (16)
-#define RSP_TYPE_MASK (0x3 << 16)
-#define RSP_TYPE_NORSP (0x0 << 16)
-#define RSP_TYPE_LGHT136 (0x1 << 16)
-#define RSP_TYPE_LGHT48 (0x2 << 16)
-#define RSP_TYPE_LGHT48B (0x3 << 16)
-#define CCCE_NOCHECK (0x0 << 19)
-#define CCCE_CHECK (0x1 << 19)
-#define CICE_NOCHECK (0x0 << 20)
-#define CICE_CHECK (0x1 << 20)
-#define DP_OFFSET (21)
-#define DP_MASK (0x1 << 21)
-#define DP_NO_DATA (0x0 << 21)
-#define DP_DATA (0x1 << 21)
-#define CMD_TYPE_NORMAL (0x0 << 22)
-#define INDEX_OFFSET (24)
-#define INDEX_MASK (0x3f << 24)
-#define INDEX(i) (i << 24)
-#define DATI_MASK (0x1 << 1)
-#define CMDI_MASK (0x1 << 0)
-#define DTW_1_BITMODE (0x0 << 1)
-#define DTW_4_BITMODE (0x1 << 1)
-#define DTW_8_BITMODE (0x1 << 5) /* CON[DW8]*/
-#define SDBP_PWROFF (0x0 << 8)
-#define SDBP_PWRON (0x1 << 8)
-#define SDVS_1V8 (0x5 << 9)
-#define SDVS_3V0 (0x6 << 9)
-#define ICE_MASK (0x1 << 0)
-#define ICE_STOP (0x0 << 0)
-#define ICS_MASK (0x1 << 1)
-#define ICS_NOTREADY (0x0 << 1)
-#define ICE_OSCILLATE (0x1 << 0)
-#define CEN_MASK (0x1 << 2)
-#define CEN_DISABLE (0x0 << 2)
-#define CEN_ENABLE (0x1 << 2)
-#define CLKD_OFFSET (6)
-#define CLKD_MASK (0x3FF << 6)
-#define DTO_MASK (0xF << 16)
-#define DTO_15THDTO (0xE << 16)
-#define SOFTRESETALL (0x1 << 24)
-#define CC_MASK (0x1 << 0)
-#define TC_MASK (0x1 << 1)
-#define BWR_MASK (0x1 << 4)
-#define BRR_MASK (0x1 << 5)
-#define ERRI_MASK (0x1 << 15)
-#define IE_CC (0x01 << 0)
-#define IE_TC (0x01 << 1)
-#define IE_BWR (0x01 << 4)
-#define IE_BRR (0x01 << 5)
-#define IE_CTO (0x01 << 16)
-#define IE_CCRC (0x01 << 17)
-#define IE_CEB (0x01 << 18)
-#define IE_CIE (0x01 << 19)
-#define IE_DTO (0x01 << 20)
-#define IE_DCRC (0x01 << 21)
-#define IE_DEB (0x01 << 22)
-#define IE_CERR (0x01 << 28)
-#define IE_BADA (0x01 << 29)
-
-#define VS30_3V0SUP (1 << 25)
-#define VS18_1V8SUP (1 << 26)
-
-/* Driver definitions */
-#define MMCSD_SECTOR_SIZE 512
-#define MMC_CARD 0
-#define SD_CARD 1
-#define BYTE_MODE 0
-#define SECTOR_MODE 1
-#define CLK_INITSEQ 0
-#define CLK_400KHZ 1
-#define CLK_MISC 2
-
-#define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK)
-#define MMC_CMD0 (INDEX(0) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE)
-
-/* Clock Configurations and Macros */
-#define MMC_CLOCK_REFERENCE 96 /* MHz */
-
-#define mmc_reg_out(addr, mask, val)\
- writel((readl(addr) & (~(mask))) | ((val) & (mask)), (addr))
-
-int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max);
#endif /* MMC_HOST_DEF_H */
diff --git a/arch/arm/include/asm/arch-omap3/spl.h b/arch/arm/include/asm/arch-omap3/spl.h
index 404e16a..dec4dac 100644
--- a/arch/arm/include/asm/arch-omap3/spl.h
+++ b/arch/arm/include/asm/arch-omap3/spl.h
@@ -26,7 +26,7 @@
#define BOOT_DEVICE_NONE 0
#define BOOT_DEVICE_XIP 1
#define BOOT_DEVICE_NAND 2
-#define BOOT_DEVICE_ONE_NAND 3
+#define BOOT_DEVICE_ONENAND 3
#define BOOT_DEVICE_MMC2 5 /*emmc*/
#define BOOT_DEVICE_MMC1 6
#define BOOT_DEVICE_XIPWAIT 7
diff --git a/arch/arm/include/asm/arch-omap4/clocks.h b/arch/arm/include/asm/arch-omap4/clocks.h
index be20fc0..ed7a1c8 100644
--- a/arch/arm/include/asm/arch-omap4/clocks.h
+++ b/arch/arm/include/asm/arch-omap4/clocks.h
@@ -25,6 +25,7 @@
#ifndef _CLOCKS_OMAP4_H_
#define _CLOCKS_OMAP4_H_
#include <common.h>
+#include <asm/omap_common.h>
/*
* Assuming a maximum of 1.5 GHz ARM speed and a minimum of 2 cycles per
@@ -38,479 +39,6 @@
#define CM_CLKMODE_DPLL_MPU 0x4A004160
#define CM_CLKSEL_CORE 0x4A004100
-struct omap4_prcm_regs {
- /* cm1.ckgen */
- u32 cm_clksel_core;
- u32 pad001[1];
- u32 cm_clksel_abe;
- u32 pad002[1];
- u32 cm_dll_ctrl;
- u32 pad003[3];
- u32 cm_clkmode_dpll_core;
- u32 cm_idlest_dpll_core;
- u32 cm_autoidle_dpll_core;
- u32 cm_clksel_dpll_core;
- u32 cm_div_m2_dpll_core;
- u32 cm_div_m3_dpll_core;
- u32 cm_div_m4_dpll_core;
- u32 cm_div_m5_dpll_core;
- u32 cm_div_m6_dpll_core;
- u32 cm_div_m7_dpll_core;
- u32 cm_ssc_deltamstep_dpll_core;
- u32 cm_ssc_modfreqdiv_dpll_core;
- u32 cm_emu_override_dpll_core;
- u32 pad004[3];
- u32 cm_clkmode_dpll_mpu;
- u32 cm_idlest_dpll_mpu;
- u32 cm_autoidle_dpll_mpu;
- u32 cm_clksel_dpll_mpu;
- u32 cm_div_m2_dpll_mpu;
- u32 pad005[5];
- u32 cm_ssc_deltamstep_dpll_mpu;
- u32 cm_ssc_modfreqdiv_dpll_mpu;
- u32 pad006[3];
- u32 cm_bypclk_dpll_mpu;
- u32 cm_clkmode_dpll_iva;
- u32 cm_idlest_dpll_iva;
- u32 cm_autoidle_dpll_iva;
- u32 cm_clksel_dpll_iva;
- u32 pad007[2];
- u32 cm_div_m4_dpll_iva;
- u32 cm_div_m5_dpll_iva;
- u32 pad008[2];
- u32 cm_ssc_deltamstep_dpll_iva;
- u32 cm_ssc_modfreqdiv_dpll_iva;
- u32 pad009[3];
- u32 cm_bypclk_dpll_iva;
- u32 cm_clkmode_dpll_abe;
- u32 cm_idlest_dpll_abe;
- u32 cm_autoidle_dpll_abe;
- u32 cm_clksel_dpll_abe;
- u32 cm_div_m2_dpll_abe;
- u32 cm_div_m3_dpll_abe;
- u32 pad010[4];
- u32 cm_ssc_deltamstep_dpll_abe;
- u32 cm_ssc_modfreqdiv_dpll_abe;
- u32 pad011[4];
- u32 cm_clkmode_dpll_ddrphy;
- u32 cm_idlest_dpll_ddrphy;
- u32 cm_autoidle_dpll_ddrphy;
- u32 cm_clksel_dpll_ddrphy;
- u32 cm_div_m2_dpll_ddrphy;
- u32 pad012[1];
- u32 cm_div_m4_dpll_ddrphy;
- u32 cm_div_m5_dpll_ddrphy;
- u32 cm_div_m6_dpll_ddrphy;
- u32 pad013[1];
- u32 cm_ssc_deltamstep_dpll_ddrphy;
- u32 pad014[5];
- u32 cm_shadow_freq_config1;
- u32 pad0141[47];
- u32 cm_mpu_mpu_clkctrl;
-
- /* cm1.dsp */
- u32 pad015[55];
- u32 cm_dsp_clkstctrl;
- u32 pad016[7];
- u32 cm_dsp_dsp_clkctrl;
-
- /* cm1.abe */
- u32 pad017[55];
- u32 cm1_abe_clkstctrl;
- u32 pad018[7];
- u32 cm1_abe_l4abe_clkctrl;
- u32 pad019[1];
- u32 cm1_abe_aess_clkctrl;
- u32 pad020[1];
- u32 cm1_abe_pdm_clkctrl;
- u32 pad021[1];
- u32 cm1_abe_dmic_clkctrl;
- u32 pad022[1];
- u32 cm1_abe_mcasp_clkctrl;
- u32 pad023[1];
- u32 cm1_abe_mcbsp1_clkctrl;
- u32 pad024[1];
- u32 cm1_abe_mcbsp2_clkctrl;
- u32 pad025[1];
- u32 cm1_abe_mcbsp3_clkctrl;
- u32 pad026[1];
- u32 cm1_abe_slimbus_clkctrl;
- u32 pad027[1];
- u32 cm1_abe_timer5_clkctrl;
- u32 pad028[1];
- u32 cm1_abe_timer6_clkctrl;
- u32 pad029[1];
- u32 cm1_abe_timer7_clkctrl;
- u32 pad030[1];
- u32 cm1_abe_timer8_clkctrl;
- u32 pad031[1];
- u32 cm1_abe_wdt3_clkctrl;
-
- /* cm2.ckgen */
- u32 pad032[3805];
- u32 cm_clksel_mpu_m3_iss_root;
- u32 cm_clksel_usb_60mhz;
- u32 cm_scale_fclk;
- u32 pad033[1];
- u32 cm_core_dvfs_perf1;
- u32 cm_core_dvfs_perf2;
- u32 cm_core_dvfs_perf3;
- u32 cm_core_dvfs_perf4;
- u32 pad034[1];
- u32 cm_core_dvfs_current;
- u32 cm_iva_dvfs_perf_tesla;
- u32 cm_iva_dvfs_perf_ivahd;
- u32 cm_iva_dvfs_perf_abe;
- u32 pad035[1];
- u32 cm_iva_dvfs_current;
- u32 pad036[1];
- u32 cm_clkmode_dpll_per;
- u32 cm_idlest_dpll_per;
- u32 cm_autoidle_dpll_per;
- u32 cm_clksel_dpll_per;
- u32 cm_div_m2_dpll_per;
- u32 cm_div_m3_dpll_per;
- u32 cm_div_m4_dpll_per;
- u32 cm_div_m5_dpll_per;
- u32 cm_div_m6_dpll_per;
- u32 cm_div_m7_dpll_per;
- u32 cm_ssc_deltamstep_dpll_per;
- u32 cm_ssc_modfreqdiv_dpll_per;
- u32 cm_emu_override_dpll_per;
- u32 pad037[3];
- u32 cm_clkmode_dpll_usb;
- u32 cm_idlest_dpll_usb;
- u32 cm_autoidle_dpll_usb;
- u32 cm_clksel_dpll_usb;
- u32 cm_div_m2_dpll_usb;
- u32 pad038[5];
- u32 cm_ssc_deltamstep_dpll_usb;
- u32 cm_ssc_modfreqdiv_dpll_usb;
- u32 pad039[1];
- u32 cm_clkdcoldo_dpll_usb;
- u32 pad040[2];
- u32 cm_clkmode_dpll_unipro;
- u32 cm_idlest_dpll_unipro;
- u32 cm_autoidle_dpll_unipro;
- u32 cm_clksel_dpll_unipro;
- u32 cm_div_m2_dpll_unipro;
- u32 pad041[5];
- u32 cm_ssc_deltamstep_dpll_unipro;
- u32 cm_ssc_modfreqdiv_dpll_unipro;
-
- /* cm2.core */
- u32 pad0411[324];
- u32 cm_l3_1_clkstctrl;
- u32 pad042[1];
- u32 cm_l3_1_dynamicdep;
- u32 pad043[5];
- u32 cm_l3_1_l3_1_clkctrl;
- u32 pad044[55];
- u32 cm_l3_2_clkstctrl;
- u32 pad045[1];
- u32 cm_l3_2_dynamicdep;
- u32 pad046[5];
- u32 cm_l3_2_l3_2_clkctrl;
- u32 pad047[1];
- u32 cm_l3_2_gpmc_clkctrl;
- u32 pad048[1];
- u32 cm_l3_2_ocmc_ram_clkctrl;
- u32 pad049[51];
- u32 cm_mpu_m3_clkstctrl;
- u32 cm_mpu_m3_staticdep;
- u32 cm_mpu_m3_dynamicdep;
- u32 pad050[5];
- u32 cm_mpu_m3_mpu_m3_clkctrl;
- u32 pad051[55];
- u32 cm_sdma_clkstctrl;
- u32 cm_sdma_staticdep;
- u32 cm_sdma_dynamicdep;
- u32 pad052[5];
- u32 cm_sdma_sdma_clkctrl;
- u32 pad053[55];
- u32 cm_memif_clkstctrl;
- u32 pad054[7];
- u32 cm_memif_dmm_clkctrl;
- u32 pad055[1];
- u32 cm_memif_emif_fw_clkctrl;
- u32 pad056[1];
- u32 cm_memif_emif_1_clkctrl;
- u32 pad057[1];
- u32 cm_memif_emif_2_clkctrl;
- u32 pad058[1];
- u32 cm_memif_dll_clkctrl;
- u32 pad059[3];
- u32 cm_memif_emif_h1_clkctrl;
- u32 pad060[1];
- u32 cm_memif_emif_h2_clkctrl;
- u32 pad061[1];
- u32 cm_memif_dll_h_clkctrl;
- u32 pad062[39];
- u32 cm_c2c_clkstctrl;
- u32 cm_c2c_staticdep;
- u32 cm_c2c_dynamicdep;
- u32 pad063[5];
- u32 cm_c2c_sad2d_clkctrl;
- u32 pad064[1];
- u32 cm_c2c_modem_icr_clkctrl;
- u32 pad065[1];
- u32 cm_c2c_sad2d_fw_clkctrl;
- u32 pad066[51];
- u32 cm_l4cfg_clkstctrl;
- u32 pad067[1];
- u32 cm_l4cfg_dynamicdep;
- u32 pad068[5];
- u32 cm_l4cfg_l4_cfg_clkctrl;
- u32 pad069[1];
- u32 cm_l4cfg_hw_sem_clkctrl;
- u32 pad070[1];
- u32 cm_l4cfg_mailbox_clkctrl;
- u32 pad071[1];
- u32 cm_l4cfg_sar_rom_clkctrl;
- u32 pad072[49];
- u32 cm_l3instr_clkstctrl;
- u32 pad073[7];
- u32 cm_l3instr_l3_3_clkctrl;
- u32 pad074[1];
- u32 cm_l3instr_l3_instr_clkctrl;
- u32 pad075[5];
- u32 cm_l3instr_intrconn_wp1_clkctrl;
-
-
- /* cm2.ivahd */
- u32 pad076[47];
- u32 cm_ivahd_clkstctrl;
- u32 pad077[7];
- u32 cm_ivahd_ivahd_clkctrl;
- u32 pad078[1];
- u32 cm_ivahd_sl2_clkctrl;
-
- /* cm2.cam */
- u32 pad079[53];
- u32 cm_cam_clkstctrl;
- u32 pad080[7];
- u32 cm_cam_iss_clkctrl;
- u32 pad081[1];
- u32 cm_cam_fdif_clkctrl;
-
- /* cm2.dss */
- u32 pad082[53];
- u32 cm_dss_clkstctrl;
- u32 pad083[7];
- u32 cm_dss_dss_clkctrl;
-
- /* cm2.sgx */
- u32 pad084[55];
- u32 cm_sgx_clkstctrl;
- u32 pad085[7];
- u32 cm_sgx_sgx_clkctrl;
-
- /* cm2.l3init */
- u32 pad086[55];
- u32 cm_l3init_clkstctrl;
-
- /* cm2.l3init */
- u32 pad087[9];
- u32 cm_l3init_hsmmc1_clkctrl;
- u32 pad088[1];
- u32 cm_l3init_hsmmc2_clkctrl;
- u32 pad089[1];
- u32 cm_l3init_hsi_clkctrl;
- u32 pad090[7];
- u32 cm_l3init_hsusbhost_clkctrl;
- u32 pad091[1];
- u32 cm_l3init_hsusbotg_clkctrl;
- u32 pad092[1];
- u32 cm_l3init_hsusbtll_clkctrl;
- u32 pad093[3];
- u32 cm_l3init_p1500_clkctrl;
- u32 pad094[21];
- u32 cm_l3init_fsusb_clkctrl;
- u32 pad095[3];
- u32 cm_l3init_usbphy_clkctrl;
-
- /* cm2.l4per */
- u32 pad096[7];
- u32 cm_l4per_clkstctrl;
- u32 pad097[1];
- u32 cm_l4per_dynamicdep;
- u32 pad098[5];
- u32 cm_l4per_adc_clkctrl;
- u32 pad100[1];
- u32 cm_l4per_gptimer10_clkctrl;
- u32 pad101[1];
- u32 cm_l4per_gptimer11_clkctrl;
- u32 pad102[1];
- u32 cm_l4per_gptimer2_clkctrl;
- u32 pad103[1];
- u32 cm_l4per_gptimer3_clkctrl;
- u32 pad104[1];
- u32 cm_l4per_gptimer4_clkctrl;
- u32 pad105[1];
- u32 cm_l4per_gptimer9_clkctrl;
- u32 pad106[1];
- u32 cm_l4per_elm_clkctrl;
- u32 pad107[1];
- u32 cm_l4per_gpio2_clkctrl;
- u32 pad108[1];
- u32 cm_l4per_gpio3_clkctrl;
- u32 pad109[1];
- u32 cm_l4per_gpio4_clkctrl;
- u32 pad110[1];
- u32 cm_l4per_gpio5_clkctrl;
- u32 pad111[1];
- u32 cm_l4per_gpio6_clkctrl;
- u32 pad112[1];
- u32 cm_l4per_hdq1w_clkctrl;
- u32 pad113[1];
- u32 cm_l4per_hecc1_clkctrl;
- u32 pad114[1];
- u32 cm_l4per_hecc2_clkctrl;
- u32 pad115[1];
- u32 cm_l4per_i2c1_clkctrl;
- u32 pad116[1];
- u32 cm_l4per_i2c2_clkctrl;
- u32 pad117[1];
- u32 cm_l4per_i2c3_clkctrl;
- u32 pad118[1];
- u32 cm_l4per_i2c4_clkctrl;
- u32 pad119[1];
- u32 cm_l4per_l4per_clkctrl;
- u32 pad1191[3];
- u32 cm_l4per_mcasp2_clkctrl;
- u32 pad120[1];
- u32 cm_l4per_mcasp3_clkctrl;
- u32 pad121[1];
- u32 cm_l4per_mcbsp4_clkctrl;
- u32 pad122[1];
- u32 cm_l4per_mgate_clkctrl;
- u32 pad123[1];
- u32 cm_l4per_mcspi1_clkctrl;
- u32 pad124[1];
- u32 cm_l4per_mcspi2_clkctrl;
- u32 pad125[1];
- u32 cm_l4per_mcspi3_clkctrl;
- u32 pad126[1];
- u32 cm_l4per_mcspi4_clkctrl;
- u32 pad127[5];
- u32 cm_l4per_mmcsd3_clkctrl;
- u32 pad128[1];
- u32 cm_l4per_mmcsd4_clkctrl;
- u32 pad129[1];
- u32 cm_l4per_msprohg_clkctrl;
- u32 pad130[1];
- u32 cm_l4per_slimbus2_clkctrl;
- u32 pad131[1];
- u32 cm_l4per_uart1_clkctrl;
- u32 pad132[1];
- u32 cm_l4per_uart2_clkctrl;
- u32 pad133[1];
- u32 cm_l4per_uart3_clkctrl;
- u32 pad134[1];
- u32 cm_l4per_uart4_clkctrl;
- u32 pad135[1];
- u32 cm_l4per_mmcsd5_clkctrl;
- u32 pad136[1];
- u32 cm_l4per_i2c5_clkctrl;
- u32 pad137[5];
- u32 cm_l4sec_clkstctrl;
- u32 cm_l4sec_staticdep;
- u32 cm_l4sec_dynamicdep;
- u32 pad138[5];
- u32 cm_l4sec_aes1_clkctrl;
- u32 pad139[1];
- u32 cm_l4sec_aes2_clkctrl;
- u32 pad140[1];
- u32 cm_l4sec_des3des_clkctrl;
- u32 pad141[1];
- u32 cm_l4sec_pkaeip29_clkctrl;
- u32 pad142[1];
- u32 cm_l4sec_rng_clkctrl;
- u32 pad143[1];
- u32 cm_l4sec_sha2md51_clkctrl;
- u32 pad144[3];
- u32 cm_l4sec_cryptodma_clkctrl;
- u32 pad145[776841];
-
- /* l4 wkup regs */
- u32 pad201[6211];
- u32 cm_abe_pll_ref_clksel;
- u32 cm_sys_clksel;
- u32 pad202[1467];
- u32 cm_wkup_clkstctrl;
- u32 pad203[7];
- u32 cm_wkup_l4wkup_clkctrl;
- u32 pad204;
- u32 cm_wkup_wdtimer1_clkctrl;
- u32 pad205;
- u32 cm_wkup_wdtimer2_clkctrl;
- u32 pad206;
- u32 cm_wkup_gpio1_clkctrl;
- u32 pad207;
- u32 cm_wkup_gptimer1_clkctrl;
- u32 pad208;
- u32 cm_wkup_gptimer12_clkctrl;
- u32 pad209;
- u32 cm_wkup_synctimer_clkctrl;
- u32 pad210;
- u32 cm_wkup_usim_clkctrl;
- u32 pad211;
- u32 cm_wkup_sarram_clkctrl;
- u32 pad212[5];
- u32 cm_wkup_keyboard_clkctrl;
- u32 pad213;
- u32 cm_wkup_rtc_clkctrl;
- u32 pad214;
- u32 cm_wkup_bandgap_clkctrl;
- u32 pad215[197];
- u32 prm_vc_val_bypass;
- u32 prm_vc_cfg_channel;
- u32 prm_vc_cfg_i2c_mode;
- u32 prm_vc_cfg_i2c_clk;
-
-};
-
-struct omap4_scrm_regs {
- u32 revision; /* 0x0000 */
- u32 pad00[63];
- u32 clksetuptime; /* 0x0100 */
- u32 pmicsetuptime; /* 0x0104 */
- u32 pad01[2];
- u32 altclksrc; /* 0x0110 */
- u32 pad02[2];
- u32 c2cclkm; /* 0x011c */
- u32 pad03[56];
- u32 extclkreq; /* 0x0200 */
- u32 accclkreq; /* 0x0204 */
- u32 pwrreq; /* 0x0208 */
- u32 pad04[1];
- u32 auxclkreq0; /* 0x0210 */
- u32 auxclkreq1; /* 0x0214 */
- u32 auxclkreq2; /* 0x0218 */
- u32 auxclkreq3; /* 0x021c */
- u32 auxclkreq4; /* 0x0220 */
- u32 auxclkreq5; /* 0x0224 */
- u32 pad05[3];
- u32 c2cclkreq; /* 0x0234 */
- u32 pad06[54];
- u32 auxclk0; /* 0x0310 */
- u32 auxclk1; /* 0x0314 */
- u32 auxclk2; /* 0x0318 */
- u32 auxclk3; /* 0x031c */
- u32 auxclk4; /* 0x0320 */
- u32 auxclk5; /* 0x0324 */
- u32 pad07[54];
- u32 rsttime_reg; /* 0x0400 */
- u32 pad08[6];
- u32 c2crstctrl; /* 0x041c */
- u32 extpwronrstctrl; /* 0x0420 */
- u32 pad09[59];
- u32 extwarmrstst_reg; /* 0x0510 */
- u32 apewarmrstst_reg; /* 0x0514 */
- u32 pad10[1];
- u32 c2cwarmrstst_reg; /* 0x051C */
-};
-
/* DPLL register offsets */
#define CM_CLKMODE_DPLL 0
#define CM_IDLEST_DPLL 0x4
@@ -714,54 +242,44 @@ struct omap4_scrm_regs {
#define DPLL_NO_LOCK 0
#define DPLL_LOCK 1
-#define NUM_SYS_CLKS 7
-
-struct dpll_regs {
- u32 cm_clkmode_dpll;
- u32 cm_idlest_dpll;
- u32 cm_autoidle_dpll;
- u32 cm_clksel_dpll;
- u32 cm_div_m2_dpll;
- u32 cm_div_m3_dpll;
- u32 cm_div_m4_dpll;
- u32 cm_div_m5_dpll;
- u32 cm_div_m6_dpll;
- u32 cm_div_m7_dpll;
-};
-
-/* DPLL parameter table */
-struct dpll_params {
- u32 m;
- u32 n;
- s8 m2;
- s8 m3;
- s8 m4;
- s8 m5;
- s8 m6;
- s8 m7;
+struct omap4_scrm_regs {
+ u32 revision; /* 0x0000 */
+ u32 pad00[63];
+ u32 clksetuptime; /* 0x0100 */
+ u32 pmicsetuptime; /* 0x0104 */
+ u32 pad01[2];
+ u32 altclksrc; /* 0x0110 */
+ u32 pad02[2];
+ u32 c2cclkm; /* 0x011c */
+ u32 pad03[56];
+ u32 extclkreq; /* 0x0200 */
+ u32 accclkreq; /* 0x0204 */
+ u32 pwrreq; /* 0x0208 */
+ u32 pad04[1];
+ u32 auxclkreq0; /* 0x0210 */
+ u32 auxclkreq1; /* 0x0214 */
+ u32 auxclkreq2; /* 0x0218 */
+ u32 auxclkreq3; /* 0x021c */
+ u32 auxclkreq4; /* 0x0220 */
+ u32 auxclkreq5; /* 0x0224 */
+ u32 pad05[3];
+ u32 c2cclkreq; /* 0x0234 */
+ u32 pad06[54];
+ u32 auxclk0; /* 0x0310 */
+ u32 auxclk1; /* 0x0314 */
+ u32 auxclk2; /* 0x0318 */
+ u32 auxclk3; /* 0x031c */
+ u32 auxclk4; /* 0x0320 */
+ u32 auxclk5; /* 0x0324 */
+ u32 pad07[54];
+ u32 rsttime_reg; /* 0x0400 */
+ u32 pad08[6];
+ u32 c2crstctrl; /* 0x041c */
+ u32 extpwronrstctrl; /* 0x0420 */
+ u32 pad09[59];
+ u32 extwarmrstst_reg; /* 0x0510 */
+ u32 apewarmrstst_reg; /* 0x0514 */
+ u32 pad10[1];
+ u32 c2cwarmrstst_reg; /* 0x051C */
};
-
-extern struct omap4_prcm_regs *const prcm;
-extern const u32 sys_clk_array[8];
-
-void scale_vcores(void);
-void do_scale_tps62361(int gpio, u32 reg, u32 volt_mv);
-u32 get_offset_code(u32 offset);
-u32 omap_ddr_clk(void);
-void do_scale_vcore(u32 vcore_reg, u32 volt_mv);
-void setup_post_dividers(u32 *const base, const struct dpll_params *params);
-u32 get_sys_clk_index(void);
-void enable_basic_clocks(void);
-void enable_basic_uboot_clocks(void);
-void enable_non_essential_clocks(void);
-void do_enable_clocks(u32 *const *clk_domains,
- u32 *const *clk_modules_hw_auto,
- u32 *const *clk_modules_explicit_en,
- u8 wait_for_enable);
-const struct dpll_params *get_mpu_dpll_params(void);
-const struct dpll_params *get_core_dpll_params(void);
-const struct dpll_params *get_per_dpll_params(void);
-const struct dpll_params *get_iva_dpll_params(void);
-const struct dpll_params *get_usb_dpll_params(void);
-const struct dpll_params *get_abe_dpll_params(void);
#endif /* _CLOCKS_OMAP4_H_ */
diff --git a/arch/arm/include/asm/arch-omap4/mmc_host_def.h b/arch/arm/include/asm/arch-omap4/mmc_host_def.h
index 2114046..9c8ccb6 100644
--- a/arch/arm/include/asm/arch-omap4/mmc_host_def.h
+++ b/arch/arm/include/asm/arch-omap4/mmc_host_def.h
@@ -25,6 +25,8 @@
#ifndef MMC_HOST_DEF_H
#define MMC_HOST_DEF_H
+#include <asm/omap_mmc.h>
+
/*
* OMAP HSMMC register definitions
*/
@@ -33,142 +35,4 @@
#define OMAP_HSMMC2_BASE 0x480B4100
#define OMAP_HSMMC3_BASE 0x480AD100
-struct hsmmc {
- unsigned char res1[0x10];
- unsigned int sysconfig; /* 0x10 */
- unsigned int sysstatus; /* 0x14 */
- unsigned char res2[0x14];
- unsigned int con; /* 0x2C */
- unsigned char res3[0xD4];
- unsigned int blk; /* 0x104 */
- unsigned int arg; /* 0x108 */
- unsigned int cmd; /* 0x10C */
- unsigned int rsp10; /* 0x110 */
- unsigned int rsp32; /* 0x114 */
- unsigned int rsp54; /* 0x118 */
- unsigned int rsp76; /* 0x11C */
- unsigned int data; /* 0x120 */
- unsigned int pstate; /* 0x124 */
- unsigned int hctl; /* 0x128 */
- unsigned int sysctl; /* 0x12C */
- unsigned int stat; /* 0x130 */
- unsigned int ie; /* 0x134 */
- unsigned char res4[0x8];
- unsigned int capa; /* 0x140 */
-};
-
-/*
- * OMAP HS MMC Bit definitions
- */
-#define MMC_SOFTRESET (0x1 << 1)
-#define RESETDONE (0x1 << 0)
-#define NOOPENDRAIN (0x0 << 0)
-#define OPENDRAIN (0x1 << 0)
-#define OD (0x1 << 0)
-#define INIT_NOINIT (0x0 << 1)
-#define INIT_INITSTREAM (0x1 << 1)
-#define HR_NOHOSTRESP (0x0 << 2)
-#define STR_BLOCK (0x0 << 3)
-#define MODE_FUNC (0x0 << 4)
-#define DW8_1_4BITMODE (0x0 << 5)
-#define MIT_CTO (0x0 << 6)
-#define CDP_ACTIVEHIGH (0x0 << 7)
-#define WPP_ACTIVEHIGH (0x0 << 8)
-#define RESERVED_MASK (0x3 << 9)
-#define CTPL_MMC_SD (0x0 << 11)
-#define BLEN_512BYTESLEN (0x200 << 0)
-#define NBLK_STPCNT (0x0 << 16)
-#define DE_DISABLE (0x0 << 0)
-#define BCE_DISABLE (0x0 << 1)
-#define BCE_ENABLE (0x1 << 1)
-#define ACEN_DISABLE (0x0 << 2)
-#define DDIR_OFFSET (4)
-#define DDIR_MASK (0x1 << 4)
-#define DDIR_WRITE (0x0 << 4)
-#define DDIR_READ (0x1 << 4)
-#define MSBS_SGLEBLK (0x0 << 5)
-#define MSBS_MULTIBLK (0x1 << 5)
-#define RSP_TYPE_OFFSET (16)
-#define RSP_TYPE_MASK (0x3 << 16)
-#define RSP_TYPE_NORSP (0x0 << 16)
-#define RSP_TYPE_LGHT136 (0x1 << 16)
-#define RSP_TYPE_LGHT48 (0x2 << 16)
-#define RSP_TYPE_LGHT48B (0x3 << 16)
-#define CCCE_NOCHECK (0x0 << 19)
-#define CCCE_CHECK (0x1 << 19)
-#define CICE_NOCHECK (0x0 << 20)
-#define CICE_CHECK (0x1 << 20)
-#define DP_OFFSET (21)
-#define DP_MASK (0x1 << 21)
-#define DP_NO_DATA (0x0 << 21)
-#define DP_DATA (0x1 << 21)
-#define CMD_TYPE_NORMAL (0x0 << 22)
-#define INDEX_OFFSET (24)
-#define INDEX_MASK (0x3f << 24)
-#define INDEX(i) (i << 24)
-#define DATI_MASK (0x1 << 1)
-#define CMDI_MASK (0x1 << 0)
-#define DTW_1_BITMODE (0x0 << 1)
-#define DTW_4_BITMODE (0x1 << 1)
-#define DTW_8_BITMODE (0x1 << 5) /* CON[DW8]*/
-#define SDBP_PWROFF (0x0 << 8)
-#define SDBP_PWRON (0x1 << 8)
-#define SDVS_1V8 (0x5 << 9)
-#define SDVS_3V0 (0x6 << 9)
-#define ICE_MASK (0x1 << 0)
-#define ICE_STOP (0x0 << 0)
-#define ICS_MASK (0x1 << 1)
-#define ICS_NOTREADY (0x0 << 1)
-#define ICE_OSCILLATE (0x1 << 0)
-#define CEN_MASK (0x1 << 2)
-#define CEN_DISABLE (0x0 << 2)
-#define CEN_ENABLE (0x1 << 2)
-#define CLKD_OFFSET (6)
-#define CLKD_MASK (0x3FF << 6)
-#define DTO_MASK (0xF << 16)
-#define DTO_15THDTO (0xE << 16)
-#define SOFTRESETALL (0x1 << 24)
-#define CC_MASK (0x1 << 0)
-#define TC_MASK (0x1 << 1)
-#define BWR_MASK (0x1 << 4)
-#define BRR_MASK (0x1 << 5)
-#define ERRI_MASK (0x1 << 15)
-#define IE_CC (0x01 << 0)
-#define IE_TC (0x01 << 1)
-#define IE_BWR (0x01 << 4)
-#define IE_BRR (0x01 << 5)
-#define IE_CTO (0x01 << 16)
-#define IE_CCRC (0x01 << 17)
-#define IE_CEB (0x01 << 18)
-#define IE_CIE (0x01 << 19)
-#define IE_DTO (0x01 << 20)
-#define IE_DCRC (0x01 << 21)
-#define IE_DEB (0x01 << 22)
-#define IE_CERR (0x01 << 28)
-#define IE_BADA (0x01 << 29)
-
-#define VS30_3V0SUP (1 << 25)
-#define VS18_1V8SUP (1 << 26)
-
-/* Driver definitions */
-#define MMCSD_SECTOR_SIZE 512
-#define MMC_CARD 0
-#define SD_CARD 1
-#define BYTE_MODE 0
-#define SECTOR_MODE 1
-#define CLK_INITSEQ 0
-#define CLK_400KHZ 1
-#define CLK_MISC 2
-
-#define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK)
-#define MMC_CMD0 (INDEX(0) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE)
-
-/* Clock Configurations and Macros */
-#define MMC_CLOCK_REFERENCE 96 /* MHz */
-
-#define mmc_reg_out(addr, mask, val)\
- writel((readl(addr) & (~(mask))) | ((val) & (mask)), (addr))
-
-int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max);
-
#endif /* MMC_HOST_DEF_H */
diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h
index d4b5076..5f321fe 100644
--- a/arch/arm/include/asm/arch-omap4/omap.h
+++ b/arch/arm/include/asm/arch-omap4/omap.h
@@ -132,34 +132,6 @@ struct s32ktimer {
#define DEVICE_TYPE_MASK (0x7 << DEVICE_TYPE_SHIFT)
#define DEVICE_GP 0x3
-struct omap_sys_ctrl_regs {
- unsigned int pad1[129];
- unsigned int control_id_code; /* 0x4A002204 */
- unsigned int pad11[22];
- unsigned int control_std_fuse_opp_bgap; /* 0x4a002260 */
- unsigned int pad2[24]; /* 0x4a002264 */
- unsigned int control_status; /* 0x4a0022c4 */
- unsigned int pad3[22]; /* 0x4a0022c8 */
- unsigned int control_ldosram_iva_voltage_ctrl; /* 0x4A002320 */
- unsigned int control_ldosram_mpu_voltage_ctrl; /* 0x4A002324 */
- unsigned int control_ldosram_core_voltage_ctrl; /* 0x4A002328 */
- unsigned int pad4[260277];
- unsigned int control_pbiaslite; /* 0x4A100600 */
- unsigned int pad5[63];
- unsigned int control_efuse_1; /* 0x4A100700 */
- unsigned int control_efuse_2; /* 0x4A100704 */
-};
-
-struct control_lpddr2io_regs {
- unsigned int control_lpddr2io1_0;
- unsigned int control_lpddr2io1_1;
- unsigned int control_lpddr2io1_2;
- unsigned int control_lpddr2io1_3;
- unsigned int control_lpddr2io2_0;
- unsigned int control_lpddr2io2_1;
- unsigned int control_lpddr2io2_2;
- unsigned int control_lpddr2io2_3;
-};
#endif /* __ASSEMBLY__ */
/*
@@ -178,7 +150,11 @@ struct control_lpddr2io_regs {
#define OMAP4_SRAM_SCRATCH_EMIF_SIZE (SRAM_SCRATCH_SPACE_ADDR + 0x4)
#define OMAP4_SRAM_SCRATCH_EMIF_T_NUM (SRAM_SCRATCH_SPACE_ADDR + 0xC)
#define OMAP4_SRAM_SCRATCH_EMIF_T_DEN (SRAM_SCRATCH_SPACE_ADDR + 0x10)
-#define OMAP4_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x14)
+#define OMAP_SRAM_SCRATCH_PRCM_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x14)
+#define OMAP_SRAM_SCRATCH_DPLLS_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x18)
+#define OMAP_SRAM_SCRATCH_VCORES_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x1C)
+#define OMAP4_SRAM_SCRATCH_SYS_CTRL (SRAM_SCRATCH_SPACE_ADDR + 0x20)
+#define OMAP4_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x24)
/* ROM code defines */
/* Boot device */
diff --git a/arch/arm/include/asm/arch-omap4/spl.h b/arch/arm/include/asm/arch-omap4/spl.h
index cec84dc..4e094f9 100644
--- a/arch/arm/include/asm/arch-omap4/spl.h
+++ b/arch/arm/include/asm/arch-omap4/spl.h
@@ -27,7 +27,7 @@
#define BOOT_DEVICE_XIP 1
#define BOOT_DEVICE_XIPWAIT 2
#define BOOT_DEVICE_NAND 3
-#define BOOT_DEVICE_ONE_NAND 4
+#define BOOT_DEVICE_ONENAND 4
#define BOOT_DEVICE_MMC1 5
#define BOOT_DEVICE_MMC2 6
#define BOOT_DEVICE_MMC2_2 0xFF
diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h
index b48f81d..d5f1868 100644
--- a/arch/arm/include/asm/arch-omap4/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap4/sys_proto.h
@@ -44,7 +44,7 @@ void sdelay(unsigned long);
void set_pl310_ctrl_reg(u32 val);
void setup_clocks_for_console(void);
void prcm_init(void);
-void bypass_dpll(u32 *const base);
+void bypass_dpll(u32 const base);
void freq_update_core(void);
u32 get_sys_clk_freq(void);
u32 omap4_ddr_clk(void);
diff --git a/arch/arm/include/asm/arch-omap5/clocks.h b/arch/arm/include/asm/arch-omap5/clocks.h
index 5f1a7aa..cfde374 100644
--- a/arch/arm/include/asm/arch-omap5/clocks.h
+++ b/arch/arm/include/asm/arch-omap5/clocks.h
@@ -26,6 +26,7 @@
#ifndef _CLOCKS_OMAP5_H_
#define _CLOCKS_OMAP5_H_
#include <common.h>
+#include <asm/omap_common.h>
/*
* Assuming a maximum of 1.5 GHz ARM speed and a minimum of 2 cycles per
@@ -39,456 +40,6 @@
#define CM_CLKMODE_DPLL_MPU (OMAP54XX_L4_CORE_BASE + 0x4160)
#define CM_CLKSEL_CORE (OMAP54XX_L4_CORE_BASE + 0x4100)
-struct omap5_prcm_regs {
- /* cm1.ckgen */
- u32 cm_clksel_core; /* 4a004100 */
- u32 pad001[1]; /* 4a004104 */
- u32 cm_clksel_abe; /* 4a004108 */
- u32 pad002[1]; /* 4a00410c */
- u32 cm_dll_ctrl; /* 4a004110 */
- u32 pad003[3]; /* 4a004114 */
- u32 cm_clkmode_dpll_core; /* 4a004120 */
- u32 cm_idlest_dpll_core; /* 4a004124 */
- u32 cm_autoidle_dpll_core; /* 4a004128 */
- u32 cm_clksel_dpll_core; /* 4a00412c */
- u32 cm_div_m2_dpll_core; /* 4a004130 */
- u32 cm_div_m3_dpll_core; /* 4a004134 */
- u32 cm_div_h11_dpll_core; /* 4a004138 */
- u32 cm_div_h12_dpll_core; /* 4a00413c */
- u32 cm_div_h13_dpll_core; /* 4a004140 */
- u32 cm_div_h14_dpll_core; /* 4a004144 */
- u32 cm_ssc_deltamstep_dpll_core; /* 4a004148 */
- u32 cm_ssc_modfreqdiv_dpll_core; /* 4a00414c */
- u32 cm_emu_override_dpll_core; /* 4a004150 */
-
- u32 cm_div_h22_dpllcore; /* 4a004154 */
- u32 cm_div_h23_dpll_core; /* 4a004158 */
- u32 pad0041[1]; /* 4a00415c */
- u32 cm_clkmode_dpll_mpu; /* 4a004160 */
- u32 cm_idlest_dpll_mpu; /* 4a004164 */
- u32 cm_autoidle_dpll_mpu; /* 4a004168 */
- u32 cm_clksel_dpll_mpu; /* 4a00416c */
- u32 cm_div_m2_dpll_mpu; /* 4a004170 */
- u32 pad005[5]; /* 4a004174 */
- u32 cm_ssc_deltamstep_dpll_mpu; /* 4a004188 */
- u32 cm_ssc_modfreqdiv_dpll_mpu; /* 4a00418c */
- u32 pad006[3]; /* 4a004190 */
- u32 cm_bypclk_dpll_mpu; /* 4a00419c */
- u32 cm_clkmode_dpll_iva; /* 4a0041a0 */
- u32 cm_idlest_dpll_iva; /* 4a0041a4 */
- u32 cm_autoidle_dpll_iva; /* 4a0041a8 */
- u32 cm_clksel_dpll_iva; /* 4a0041ac */
- u32 pad007[2]; /* 4a0041b0 */
- u32 cm_div_h11_dpll_iva; /* 4a0041b8 */
- u32 cm_div_h12_dpll_iva; /* 4a0041bc */
- u32 pad008[2]; /* 4a0041c0 */
- u32 cm_ssc_deltamstep_dpll_iva; /* 4a0041c8 */
- u32 cm_ssc_modfreqdiv_dpll_iva; /* 4a0041cc */
- u32 pad009[3]; /* 4a0041d0 */
- u32 cm_bypclk_dpll_iva; /* 4a0041dc */
- u32 cm_clkmode_dpll_abe; /* 4a0041e0 */
- u32 cm_idlest_dpll_abe; /* 4a0041e4 */
- u32 cm_autoidle_dpll_abe; /* 4a0041e8 */
- u32 cm_clksel_dpll_abe; /* 4a0041ec */
- u32 cm_div_m2_dpll_abe; /* 4a0041f0 */
- u32 cm_div_m3_dpll_abe; /* 4a0041f4 */
- u32 pad010[4]; /* 4a0041f8 */
- u32 cm_ssc_deltamstep_dpll_abe; /* 4a004208 */
- u32 cm_ssc_modfreqdiv_dpll_abe; /* 4a00420c */
- u32 pad011[4]; /* 4a004210 */
- u32 cm_clkmode_dpll_ddrphy; /* 4a004220 */
- u32 cm_idlest_dpll_ddrphy; /* 4a004224 */
- u32 cm_autoidle_dpll_ddrphy; /* 4a004228 */
- u32 cm_clksel_dpll_ddrphy; /* 4a00422c */
- u32 cm_div_m2_dpll_ddrphy; /* 4a004230 */
- u32 pad012[1]; /* 4a004234 */
- u32 cm_div_h11_dpll_ddrphy; /* 4a004238 */
- u32 cm_div_h12_dpll_ddrphy; /* 4a00423c */
- u32 cm_div_h13_dpll_ddrphy; /* 4a004240 */
- u32 pad013[1]; /* 4a004244 */
- u32 cm_ssc_deltamstep_dpll_ddrphy; /* 4a004248 */
- u32 pad014[5]; /* 4a00424c */
- u32 cm_shadow_freq_config1; /* 4a004260 */
- u32 pad0141[47]; /* 4a004264 */
- u32 cm_mpu_mpu_clkctrl; /* 4a004320 */
-
-
- /* cm1.dsp */
- u32 pad015[55]; /* 4a004324 */
- u32 cm_dsp_clkstctrl; /* 4a004400 */
- u32 pad016[7]; /* 4a004404 */
- u32 cm_dsp_dsp_clkctrl; /* 4a004420 */
-
- /* cm1.abe */
- u32 pad017[55]; /* 4a004424 */
- u32 cm1_abe_clkstctrl; /* 4a004500 */
- u32 pad018[7]; /* 4a004504 */
- u32 cm1_abe_l4abe_clkctrl; /* 4a004520 */
- u32 pad019[1]; /* 4a004524 */
- u32 cm1_abe_aess_clkctrl; /* 4a004528 */
- u32 pad020[1]; /* 4a00452c */
- u32 cm1_abe_pdm_clkctrl; /* 4a004530 */
- u32 pad021[1]; /* 4a004534 */
- u32 cm1_abe_dmic_clkctrl; /* 4a004538 */
- u32 pad022[1]; /* 4a00453c */
- u32 cm1_abe_mcasp_clkctrl; /* 4a004540 */
- u32 pad023[1]; /* 4a004544 */
- u32 cm1_abe_mcbsp1_clkctrl; /* 4a004548 */
- u32 pad024[1]; /* 4a00454c */
- u32 cm1_abe_mcbsp2_clkctrl; /* 4a004550 */
- u32 pad025[1]; /* 4a004554 */
- u32 cm1_abe_mcbsp3_clkctrl; /* 4a004558 */
- u32 pad026[1]; /* 4a00455c */
- u32 cm1_abe_slimbus_clkctrl; /* 4a004560 */
- u32 pad027[1]; /* 4a004564 */
- u32 cm1_abe_timer5_clkctrl; /* 4a004568 */
- u32 pad028[1]; /* 4a00456c */
- u32 cm1_abe_timer6_clkctrl; /* 4a004570 */
- u32 pad029[1]; /* 4a004574 */
- u32 cm1_abe_timer7_clkctrl; /* 4a004578 */
- u32 pad030[1]; /* 4a00457c */
- u32 cm1_abe_timer8_clkctrl; /* 4a004580 */
- u32 pad031[1]; /* 4a004584 */
- u32 cm1_abe_wdt3_clkctrl; /* 4a004588 */
-
- /* cm2.ckgen */
- u32 pad032[3805]; /* 4a00458c */
- u32 cm_clksel_mpu_m3_iss_root; /* 4a008100 */
- u32 cm_clksel_usb_60mhz; /* 4a008104 */
- u32 cm_scale_fclk; /* 4a008108 */
- u32 pad033[1]; /* 4a00810c */
- u32 cm_core_dvfs_perf1; /* 4a008110 */
- u32 cm_core_dvfs_perf2; /* 4a008114 */
- u32 cm_core_dvfs_perf3; /* 4a008118 */
- u32 cm_core_dvfs_perf4; /* 4a00811c */
- u32 pad034[1]; /* 4a008120 */
- u32 cm_core_dvfs_current; /* 4a008124 */
- u32 cm_iva_dvfs_perf_tesla; /* 4a008128 */
- u32 cm_iva_dvfs_perf_ivahd; /* 4a00812c */
- u32 cm_iva_dvfs_perf_abe; /* 4a008130 */
- u32 pad035[1]; /* 4a008134 */
- u32 cm_iva_dvfs_current; /* 4a008138 */
- u32 pad036[1]; /* 4a00813c */
- u32 cm_clkmode_dpll_per; /* 4a008140 */
- u32 cm_idlest_dpll_per; /* 4a008144 */
- u32 cm_autoidle_dpll_per; /* 4a008148 */
- u32 cm_clksel_dpll_per; /* 4a00814c */
- u32 cm_div_m2_dpll_per; /* 4a008150 */
- u32 cm_div_m3_dpll_per; /* 4a008154 */
- u32 cm_div_h11_dpll_per; /* 4a008158 */
- u32 cm_div_h12_dpll_per; /* 4a00815c */
- u32 pad0361[1]; /* 4a008160 */
- u32 cm_div_h14_dpll_per; /* 4a008164 */
- u32 cm_ssc_deltamstep_dpll_per; /* 4a008168 */
- u32 cm_ssc_modfreqdiv_dpll_per; /* 4a00816c */
- u32 cm_emu_override_dpll_per; /* 4a008170 */
- u32 pad037[3]; /* 4a008174 */
- u32 cm_clkmode_dpll_usb; /* 4a008180 */
- u32 cm_idlest_dpll_usb; /* 4a008184 */
- u32 cm_autoidle_dpll_usb; /* 4a008188 */
- u32 cm_clksel_dpll_usb; /* 4a00818c */
- u32 cm_div_m2_dpll_usb; /* 4a008190 */
- u32 pad038[5]; /* 4a008194 */
- u32 cm_ssc_deltamstep_dpll_usb; /* 4a0081a8 */
- u32 cm_ssc_modfreqdiv_dpll_usb; /* 4a0081ac */
- u32 pad039[1]; /* 4a0081b0 */
- u32 cm_clkdcoldo_dpll_usb; /* 4a0081b4 */
- u32 pad040[2]; /* 4a0081b8 */
- u32 cm_clkmode_dpll_unipro; /* 4a0081c0 */
- u32 cm_idlest_dpll_unipro; /* 4a0081c4 */
- u32 cm_autoidle_dpll_unipro; /* 4a0081c8 */
- u32 cm_clksel_dpll_unipro; /* 4a0081cc */
- u32 cm_div_m2_dpll_unipro; /* 4a0081d0 */
- u32 pad041[5]; /* 4a0081d4 */
- u32 cm_ssc_deltamstep_dpll_unipro; /* 4a0081e8 */
- u32 cm_ssc_modfreqdiv_dpll_unipro; /* 4a0081ec */
-
- /* cm2.core */
- u32 pad0411[324]; /* 4a0081f0 */
- u32 cm_l3_1_clkstctrl; /* 4a008700 */
- u32 pad042[1]; /* 4a008704 */
- u32 cm_l3_1_dynamicdep; /* 4a008708 */
- u32 pad043[5]; /* 4a00870c */
- u32 cm_l3_1_l3_1_clkctrl; /* 4a008720 */
- u32 pad044[55]; /* 4a008724 */
- u32 cm_l3_2_clkstctrl; /* 4a008800 */
- u32 pad045[1]; /* 4a008804 */
- u32 cm_l3_2_dynamicdep; /* 4a008808 */
- u32 pad046[5]; /* 4a00880c */
- u32 cm_l3_2_l3_2_clkctrl; /* 4a008820 */
- u32 pad047[1]; /* 4a008824 */
- u32 cm_l3_2_gpmc_clkctrl; /* 4a008828 */
- u32 pad048[1]; /* 4a00882c */
- u32 cm_l3_2_ocmc_ram_clkctrl; /* 4a008830 */
- u32 pad049[51]; /* 4a008834 */
- u32 cm_mpu_m3_clkstctrl; /* 4a008900 */
- u32 cm_mpu_m3_staticdep; /* 4a008904 */
- u32 cm_mpu_m3_dynamicdep; /* 4a008908 */
- u32 pad050[5]; /* 4a00890c */
- u32 cm_mpu_m3_mpu_m3_clkctrl; /* 4a008920 */
- u32 pad051[55]; /* 4a008924 */
- u32 cm_sdma_clkstctrl; /* 4a008a00 */
- u32 cm_sdma_staticdep; /* 4a008a04 */
- u32 cm_sdma_dynamicdep; /* 4a008a08 */
- u32 pad052[5]; /* 4a008a0c */
- u32 cm_sdma_sdma_clkctrl; /* 4a008a20 */
- u32 pad053[55]; /* 4a008a24 */
- u32 cm_memif_clkstctrl; /* 4a008b00 */
- u32 pad054[7]; /* 4a008b04 */
- u32 cm_memif_dmm_clkctrl; /* 4a008b20 */
- u32 pad055[1]; /* 4a008b24 */
- u32 cm_memif_emif_fw_clkctrl; /* 4a008b28 */
- u32 pad056[1]; /* 4a008b2c */
- u32 cm_memif_emif_1_clkctrl; /* 4a008b30 */
- u32 pad057[1]; /* 4a008b34 */
- u32 cm_memif_emif_2_clkctrl; /* 4a008b38 */
- u32 pad058[1]; /* 4a008b3c */
- u32 cm_memif_dll_clkctrl; /* 4a008b40 */
- u32 pad059[3]; /* 4a008b44 */
- u32 cm_memif_emif_h1_clkctrl; /* 4a008b50 */
- u32 pad060[1]; /* 4a008b54 */
- u32 cm_memif_emif_h2_clkctrl; /* 4a008b58 */
- u32 pad061[1]; /* 4a008b5c */
- u32 cm_memif_dll_h_clkctrl; /* 4a008b60 */
- u32 pad062[39]; /* 4a008b64 */
- u32 cm_c2c_clkstctrl; /* 4a008c00 */
- u32 cm_c2c_staticdep; /* 4a008c04 */
- u32 cm_c2c_dynamicdep; /* 4a008c08 */
- u32 pad063[5]; /* 4a008c0c */
- u32 cm_c2c_sad2d_clkctrl; /* 4a008c20 */
- u32 pad064[1]; /* 4a008c24 */
- u32 cm_c2c_modem_icr_clkctrl; /* 4a008c28 */
- u32 pad065[1]; /* 4a008c2c */
- u32 cm_c2c_sad2d_fw_clkctrl; /* 4a008c30 */
- u32 pad066[51]; /* 4a008c34 */
- u32 cm_l4cfg_clkstctrl; /* 4a008d00 */
- u32 pad067[1]; /* 4a008d04 */
- u32 cm_l4cfg_dynamicdep; /* 4a008d08 */
- u32 pad068[5]; /* 4a008d0c */
- u32 cm_l4cfg_l4_cfg_clkctrl; /* 4a008d20 */
- u32 pad069[1]; /* 4a008d24 */
- u32 cm_l4cfg_hw_sem_clkctrl; /* 4a008d28 */
- u32 pad070[1]; /* 4a008d2c */
- u32 cm_l4cfg_mailbox_clkctrl; /* 4a008d30 */
- u32 pad071[1]; /* 4a008d34 */
- u32 cm_l4cfg_sar_rom_clkctrl; /* 4a008d38 */
- u32 pad072[49]; /* 4a008d3c */
- u32 cm_l3instr_clkstctrl; /* 4a008e00 */
- u32 pad073[7]; /* 4a008e04 */
- u32 cm_l3instr_l3_3_clkctrl; /* 4a008e20 */
- u32 pad074[1]; /* 4a008e24 */
- u32 cm_l3instr_l3_instr_clkctrl; /* 4a008e28 */
- u32 pad075[5]; /* 4a008e2c */
- u32 cm_l3instr_intrconn_wp1_clkctrl; /* 4a008e40 */
-
-
- /* cm2.ivahd */
- u32 pad076[47]; /* 4a008e44 */
- u32 cm_ivahd_clkstctrl; /* 4a008f00 */
- u32 pad077[7]; /* 4a008f04 */
- u32 cm_ivahd_ivahd_clkctrl; /* 4a008f20 */
- u32 pad078[1]; /* 4a008f24 */
- u32 cm_ivahd_sl2_clkctrl; /* 4a008f28 */
-
- /* cm2.cam */
- u32 pad079[53]; /* 4a008f2c */
- u32 cm_cam_clkstctrl; /* 4a009000 */
- u32 pad080[7]; /* 4a009004 */
- u32 cm_cam_iss_clkctrl; /* 4a009020 */
- u32 pad081[1]; /* 4a009024 */
- u32 cm_cam_fdif_clkctrl; /* 4a009028 */
-
- /* cm2.dss */
- u32 pad082[53]; /* 4a00902c */
- u32 cm_dss_clkstctrl; /* 4a009100 */
- u32 pad083[7]; /* 4a009104 */
- u32 cm_dss_dss_clkctrl; /* 4a009120 */
-
- /* cm2.sgx */
- u32 pad084[55]; /* 4a009124 */
- u32 cm_sgx_clkstctrl; /* 4a009200 */
- u32 pad085[7]; /* 4a009204 */
- u32 cm_sgx_sgx_clkctrl; /* 4a009220 */
-
- /* cm2.l3init */
- u32 pad086[55]; /* 4a009224 */
- u32 cm_l3init_clkstctrl; /* 4a009300 */
-
- /* cm2.l3init */
- u32 pad087[9]; /* 4a009304 */
- u32 cm_l3init_hsmmc1_clkctrl; /* 4a009328 */
- u32 pad088[1]; /* 4a00932c */
- u32 cm_l3init_hsmmc2_clkctrl; /* 4a009330 */
- u32 pad089[1]; /* 4a009334 */
- u32 cm_l3init_hsi_clkctrl; /* 4a009338 */
- u32 pad090[7]; /* 4a00933c */
- u32 cm_l3init_hsusbhost_clkctrl; /* 4a009358 */
- u32 pad091[1]; /* 4a00935c */
- u32 cm_l3init_hsusbotg_clkctrl; /* 4a009360 */
- u32 pad092[1]; /* 4a009364 */
- u32 cm_l3init_hsusbtll_clkctrl; /* 4a009368 */
- u32 pad093[3]; /* 4a00936c */
- u32 cm_l3init_p1500_clkctrl; /* 4a009378 */
- u32 pad094[21]; /* 4a00937c */
- u32 cm_l3init_fsusb_clkctrl; /* 4a0093d0 */
- u32 pad095[3]; /* 4a0093d4 */
- u32 cm_l3init_ocp2scp1_clkctrl;
-
- /* cm2.l4per */
- u32 pad096[7]; /* 4a0093e4 */
- u32 cm_l4per_clkstctrl; /* 4a009400 */
- u32 pad097[1]; /* 4a009404 */
- u32 cm_l4per_dynamicdep; /* 4a009408 */
- u32 pad098[5]; /* 4a00940c */
- u32 cm_l4per_adc_clkctrl; /* 4a009420 */
- u32 pad100[1]; /* 4a009424 */
- u32 cm_l4per_gptimer10_clkctrl; /* 4a009428 */
- u32 pad101[1]; /* 4a00942c */
- u32 cm_l4per_gptimer11_clkctrl; /* 4a009430 */
- u32 pad102[1]; /* 4a009434 */
- u32 cm_l4per_gptimer2_clkctrl; /* 4a009438 */
- u32 pad103[1]; /* 4a00943c */
- u32 cm_l4per_gptimer3_clkctrl; /* 4a009440 */
- u32 pad104[1]; /* 4a009444 */
- u32 cm_l4per_gptimer4_clkctrl; /* 4a009448 */
- u32 pad105[1]; /* 4a00944c */
- u32 cm_l4per_gptimer9_clkctrl; /* 4a009450 */
- u32 pad106[1]; /* 4a009454 */
- u32 cm_l4per_elm_clkctrl; /* 4a009458 */
- u32 pad107[1]; /* 4a00945c */
- u32 cm_l4per_gpio2_clkctrl; /* 4a009460 */
- u32 pad108[1]; /* 4a009464 */
- u32 cm_l4per_gpio3_clkctrl; /* 4a009468 */
- u32 pad109[1]; /* 4a00946c */
- u32 cm_l4per_gpio4_clkctrl; /* 4a009470 */
- u32 pad110[1]; /* 4a009474 */
- u32 cm_l4per_gpio5_clkctrl; /* 4a009478 */
- u32 pad111[1]; /* 4a00947c */
- u32 cm_l4per_gpio6_clkctrl; /* 4a009480 */
- u32 pad112[1]; /* 4a009484 */
- u32 cm_l4per_hdq1w_clkctrl; /* 4a009488 */
- u32 pad113[1]; /* 4a00948c */
- u32 cm_l4per_hecc1_clkctrl; /* 4a009490 */
- u32 pad114[1]; /* 4a009494 */
- u32 cm_l4per_hecc2_clkctrl; /* 4a009498 */
- u32 pad115[1]; /* 4a00949c */
- u32 cm_l4per_i2c1_clkctrl; /* 4a0094a0 */
- u32 pad116[1]; /* 4a0094a4 */
- u32 cm_l4per_i2c2_clkctrl; /* 4a0094a8 */
- u32 pad117[1]; /* 4a0094ac */
- u32 cm_l4per_i2c3_clkctrl; /* 4a0094b0 */
- u32 pad118[1]; /* 4a0094b4 */
- u32 cm_l4per_i2c4_clkctrl; /* 4a0094b8 */
- u32 pad119[1]; /* 4a0094bc */
- u32 cm_l4per_l4per_clkctrl; /* 4a0094c0 */
- u32 pad1191[3]; /* 4a0094c4 */
- u32 cm_l4per_mcasp2_clkctrl; /* 4a0094d0 */
- u32 pad120[1]; /* 4a0094d4 */
- u32 cm_l4per_mcasp3_clkctrl; /* 4a0094d8 */
- u32 pad121[3]; /* 4a0094dc */
- u32 cm_l4per_mgate_clkctrl; /* 4a0094e8 */
- u32 pad123[1]; /* 4a0094ec */
- u32 cm_l4per_mcspi1_clkctrl; /* 4a0094f0 */
- u32 pad124[1]; /* 4a0094f4 */
- u32 cm_l4per_mcspi2_clkctrl; /* 4a0094f8 */
- u32 pad125[1]; /* 4a0094fc */
- u32 cm_l4per_mcspi3_clkctrl; /* 4a009500 */
- u32 pad126[1]; /* 4a009504 */
- u32 cm_l4per_mcspi4_clkctrl; /* 4a009508 */
- u32 pad127[1]; /* 4a00950c */
- u32 cm_l4per_gpio7_clkctrl; /* 4a009510 */
- u32 pad1271[1]; /* 4a009514 */
- u32 cm_l4per_gpio8_clkctrl; /* 4a009518 */
- u32 pad1272[1]; /* 4a00951c */
- u32 cm_l4per_mmcsd3_clkctrl; /* 4a009520 */
- u32 pad128[1]; /* 4a009524 */
- u32 cm_l4per_mmcsd4_clkctrl; /* 4a009528 */
- u32 pad129[1]; /* 4a00952c */
- u32 cm_l4per_msprohg_clkctrl; /* 4a009530 */
- u32 pad130[1]; /* 4a009534 */
- u32 cm_l4per_slimbus2_clkctrl; /* 4a009538 */
- u32 pad131[1]; /* 4a00953c */
- u32 cm_l4per_uart1_clkctrl; /* 4a009540 */
- u32 pad132[1]; /* 4a009544 */
- u32 cm_l4per_uart2_clkctrl; /* 4a009548 */
- u32 pad133[1]; /* 4a00954c */
- u32 cm_l4per_uart3_clkctrl; /* 4a009550 */
- u32 pad134[1]; /* 4a009554 */
- u32 cm_l4per_uart4_clkctrl; /* 4a009558 */
- u32 pad135[1]; /* 4a00955c */
- u32 cm_l4per_mmcsd5_clkctrl; /* 4a009560 */
- u32 pad136[1]; /* 4a009564 */
- u32 cm_l4per_i2c5_clkctrl; /* 4a009568 */
- u32 pad1371[1]; /* 4a00956c */
- u32 cm_l4per_uart5_clkctrl; /* 4a009570 */
- u32 pad1372[1]; /* 4a009574 */
- u32 cm_l4per_uart6_clkctrl; /* 4a009578 */
- u32 pad1374[1]; /* 4a00957c */
- u32 cm_l4sec_clkstctrl; /* 4a009580 */
- u32 cm_l4sec_staticdep; /* 4a009584 */
- u32 cm_l4sec_dynamicdep; /* 4a009588 */
- u32 pad138[5]; /* 4a00958c */
- u32 cm_l4sec_aes1_clkctrl; /* 4a0095a0 */
- u32 pad139[1]; /* 4a0095a4 */
- u32 cm_l4sec_aes2_clkctrl; /* 4a0095a8 */
- u32 pad140[1]; /* 4a0095ac */
- u32 cm_l4sec_des3des_clkctrl; /* 4a0095b0 */
- u32 pad141[1]; /* 4a0095b4 */
- u32 cm_l4sec_pkaeip29_clkctrl; /* 4a0095b8 */
- u32 pad142[1]; /* 4a0095bc */
- u32 cm_l4sec_rng_clkctrl; /* 4a0095c0 */
- u32 pad143[1]; /* 4a0095c4 */
- u32 cm_l4sec_sha2md51_clkctrl; /* 4a0095c8 */
- u32 pad144[3]; /* 4a0095cc */
- u32 cm_l4sec_cryptodma_clkctrl; /* 4a0095d8 */
- u32 pad145[3660425]; /* 4a0095dc */
-
- /* l4 wkup regs */
- u32 pad201[6211]; /* 4ae00000 */
- u32 cm_abe_pll_ref_clksel; /* 4ae0610c */
- u32 cm_sys_clksel; /* 4ae06110 */
- u32 pad202[1467]; /* 4ae06114 */
- u32 cm_wkup_clkstctrl; /* 4ae07800 */
- u32 pad203[7]; /* 4ae07804 */
- u32 cm_wkup_l4wkup_clkctrl; /* 4ae07820 */
- u32 pad204; /* 4ae07824 */
- u32 cm_wkup_wdtimer1_clkctrl; /* 4ae07828 */
- u32 pad205; /* 4ae0782c */
- u32 cm_wkup_wdtimer2_clkctrl; /* 4ae07830 */
- u32 pad206; /* 4ae07834 */
- u32 cm_wkup_gpio1_clkctrl; /* 4ae07838 */
- u32 pad207; /* 4ae0783c */
- u32 cm_wkup_gptimer1_clkctrl; /* 4ae07840 */
- u32 pad208; /* 4ae07844 */
- u32 cm_wkup_gptimer12_clkctrl; /* 4ae07848 */
- u32 pad209; /* 4ae0784c */
- u32 cm_wkup_synctimer_clkctrl; /* 4ae07850 */
- u32 pad210; /* 4ae07854 */
- u32 cm_wkup_usim_clkctrl; /* 4ae07858 */
- u32 pad211; /* 4ae0785c */
- u32 cm_wkup_sarram_clkctrl; /* 4ae07860 */
- u32 pad212[5]; /* 4ae07864 */
- u32 cm_wkup_keyboard_clkctrl; /* 4ae07878 */
- u32 pad213; /* 4ae0787c */
- u32 cm_wkup_rtc_clkctrl; /* 4ae07880 */
- u32 pad214; /* 4ae07884 */
- u32 cm_wkup_bandgap_clkctrl; /* 4ae07888 */
- u32 pad215[1]; /* 4ae0788c */
- u32 cm_wkupaon_scrm_clkctrl; /* 4ae07890 */
- u32 pad216[195];
- u32 prm_vc_val_bypass; /* 4ae07ba0 */
- u32 pad217[4];
- u32 prm_vc_cfg_i2c_mode; /* 4ae07bb4 */
- u32 prm_vc_cfg_i2c_clk; /* 4ae07bb8 */
- u32 pad218[2];
- u32 prm_sldo_core_setup; /* 4ae07bc4 */
- u32 prm_sldo_core_ctrl; /* 4ae07bc8 */
- u32 prm_sldo_mpu_setup; /* 4ae07bcc */
- u32 prm_sldo_mpu_ctrl; /* 4ae07bd0 */
- u32 prm_sldo_mm_setup; /* 4ae07bd4 */
- u32 prm_sldo_mm_ctrl; /* 4ae07bd8 */
-};
-
/* DPLL register offsets */
#define CM_CLKMODE_DPLL 0
#define CM_IDLEST_DPLL 0x4
@@ -625,9 +176,9 @@ struct omap5_prcm_regs {
/* CM_MPU_MPU_CLKCTRL */
#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_SHIFT 24
-#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK (1 << 24)
-#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_SHIFT 25
-#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK (1 << 25)
+#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK (3 << 24)
+#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_SHIFT 26
+#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK (1 << 26)
/* CM_WKUPAON_SCRM_CLKCTRL */
#define OPTFCLKEN_SCRM_PER_SHIFT 9
@@ -635,6 +186,10 @@ struct omap5_prcm_regs {
#define OPTFCLKEN_SCRM_CORE_SHIFT 8
#define OPTFCLKEN_SCRM_CORE_MASK (1 << 8)
+/* CM_COREAON_IO_SRCOMP_CLKCTRL */
+#define OPTFCLKEN_SRCOMP_FCLK_SHIFT 8
+#define OPTFCLKEN_SRCOMP_FCLK_MASK (1 << 8)
+
/* Clock frequencies */
#define OMAP_SYS_CLK_FREQ_38_4_MHZ 38400000
#define OMAP_SYS_CLK_IND_38_4_MHZ 6
@@ -650,12 +205,25 @@ struct omap5_prcm_regs {
#define SMPS_REG_ADDR_8_CORE 0x37
/* PALMAS VOLTAGE SETTINGS in mv for OPP_NOMINAL */
-#define VDD_MPU 1000
-#define VDD_MM 1000
+/* ES1.0 settings */
+#define VDD_MPU 1040
+#define VDD_MM 1040
#define VDD_CORE 1040
-#define VDD_MPU_5432 1150
-#define VDD_MM_5432 1150
-#define VDD_CORE_5432 1150
+
+#define VDD_MPU_LOW 890
+#define VDD_MM_LOW 890
+#define VDD_CORE_LOW 890
+
+/* ES2.0 settings */
+#define VDD_MPU_ES2 1060
+#define VDD_MM_ES2 1025
+#define VDD_CORE_ES2 1040
+
+#define VDD_MPU_ES2_HIGH 1250
+#define VDD_MM_ES2_OD 1120
+
+#define VDD_MPU_ES2_LOW 880
+#define VDD_MM_ES2_LOW 880
/* Standard offset is 0.5v expressed in uv */
#define PALMAS_SMPS_BASE_VOLT_UV 500000
@@ -683,59 +251,4 @@ struct omap5_prcm_regs {
#define DPLL_NO_LOCK 0
#define DPLL_LOCK 1
-#define NUM_SYS_CLKS 7
-
-struct dpll_regs {
- u32 cm_clkmode_dpll;
- u32 cm_idlest_dpll;
- u32 cm_autoidle_dpll;
- u32 cm_clksel_dpll;
- u32 cm_div_m2_dpll;
- u32 cm_div_m3_dpll;
- u32 cm_div_h11_dpll;
- u32 cm_div_h12_dpll;
- u32 cm_div_h13_dpll;
- u32 cm_div_h14_dpll;
- u32 reserved[3];
- u32 cm_div_h22_dpll;
- u32 cm_div_h23_dpll;
-};
-
-/* DPLL parameter table */
-struct dpll_params {
- u32 m;
- u32 n;
- s8 m2;
- s8 m3;
- s8 h11;
- s8 h12;
- s8 h13;
- s8 h14;
- s8 h22;
- s8 h23;
-};
-
-extern struct omap5_prcm_regs *const prcm;
-extern const u32 sys_clk_array[8];
-
-void scale_vcores(void);
-void do_scale_tps62361(int gpio, u32 reg, u32 volt_mv);
-u32 get_offset_code(u32 offset);
-u32 omap_ddr_clk(void);
-void do_scale_vcore(u32 vcore_reg, u32 volt_mv);
-void setup_post_dividers(u32 *const base, const struct dpll_params *params);
-u32 get_sys_clk_index(void);
-void enable_basic_clocks(void);
-void enable_non_essential_clocks(void);
-void enable_basic_uboot_clocks(void);
-void do_enable_clocks(u32 *const *clk_domains,
- u32 *const *clk_modules_hw_auto,
- u32 *const *clk_modules_explicit_en,
- u8 wait_for_enable);
-const struct dpll_params *get_mpu_dpll_params(void);
-const struct dpll_params *get_core_dpll_params(void);
-const struct dpll_params *get_per_dpll_params(void);
-const struct dpll_params *get_iva_dpll_params(void);
-const struct dpll_params *get_usb_dpll_params(void);
-const struct dpll_params *get_abe_dpll_params(void);
#endif /* _CLOCKS_OMAP5_H_ */
diff --git a/arch/arm/include/asm/arch-omap5/mmc_host_def.h b/arch/arm/include/asm/arch-omap5/mmc_host_def.h
index 2114046..9c8ccb6 100644
--- a/arch/arm/include/asm/arch-omap5/mmc_host_def.h
+++ b/arch/arm/include/asm/arch-omap5/mmc_host_def.h
@@ -25,6 +25,8 @@
#ifndef MMC_HOST_DEF_H
#define MMC_HOST_DEF_H
+#include <asm/omap_mmc.h>
+
/*
* OMAP HSMMC register definitions
*/
@@ -33,142 +35,4 @@
#define OMAP_HSMMC2_BASE 0x480B4100
#define OMAP_HSMMC3_BASE 0x480AD100
-struct hsmmc {
- unsigned char res1[0x10];
- unsigned int sysconfig; /* 0x10 */
- unsigned int sysstatus; /* 0x14 */
- unsigned char res2[0x14];
- unsigned int con; /* 0x2C */
- unsigned char res3[0xD4];
- unsigned int blk; /* 0x104 */
- unsigned int arg; /* 0x108 */
- unsigned int cmd; /* 0x10C */
- unsigned int rsp10; /* 0x110 */
- unsigned int rsp32; /* 0x114 */
- unsigned int rsp54; /* 0x118 */
- unsigned int rsp76; /* 0x11C */
- unsigned int data; /* 0x120 */
- unsigned int pstate; /* 0x124 */
- unsigned int hctl; /* 0x128 */
- unsigned int sysctl; /* 0x12C */
- unsigned int stat; /* 0x130 */
- unsigned int ie; /* 0x134 */
- unsigned char res4[0x8];
- unsigned int capa; /* 0x140 */
-};
-
-/*
- * OMAP HS MMC Bit definitions
- */
-#define MMC_SOFTRESET (0x1 << 1)
-#define RESETDONE (0x1 << 0)
-#define NOOPENDRAIN (0x0 << 0)
-#define OPENDRAIN (0x1 << 0)
-#define OD (0x1 << 0)
-#define INIT_NOINIT (0x0 << 1)
-#define INIT_INITSTREAM (0x1 << 1)
-#define HR_NOHOSTRESP (0x0 << 2)
-#define STR_BLOCK (0x0 << 3)
-#define MODE_FUNC (0x0 << 4)
-#define DW8_1_4BITMODE (0x0 << 5)
-#define MIT_CTO (0x0 << 6)
-#define CDP_ACTIVEHIGH (0x0 << 7)
-#define WPP_ACTIVEHIGH (0x0 << 8)
-#define RESERVED_MASK (0x3 << 9)
-#define CTPL_MMC_SD (0x0 << 11)
-#define BLEN_512BYTESLEN (0x200 << 0)
-#define NBLK_STPCNT (0x0 << 16)
-#define DE_DISABLE (0x0 << 0)
-#define BCE_DISABLE (0x0 << 1)
-#define BCE_ENABLE (0x1 << 1)
-#define ACEN_DISABLE (0x0 << 2)
-#define DDIR_OFFSET (4)
-#define DDIR_MASK (0x1 << 4)
-#define DDIR_WRITE (0x0 << 4)
-#define DDIR_READ (0x1 << 4)
-#define MSBS_SGLEBLK (0x0 << 5)
-#define MSBS_MULTIBLK (0x1 << 5)
-#define RSP_TYPE_OFFSET (16)
-#define RSP_TYPE_MASK (0x3 << 16)
-#define RSP_TYPE_NORSP (0x0 << 16)
-#define RSP_TYPE_LGHT136 (0x1 << 16)
-#define RSP_TYPE_LGHT48 (0x2 << 16)
-#define RSP_TYPE_LGHT48B (0x3 << 16)
-#define CCCE_NOCHECK (0x0 << 19)
-#define CCCE_CHECK (0x1 << 19)
-#define CICE_NOCHECK (0x0 << 20)
-#define CICE_CHECK (0x1 << 20)
-#define DP_OFFSET (21)
-#define DP_MASK (0x1 << 21)
-#define DP_NO_DATA (0x0 << 21)
-#define DP_DATA (0x1 << 21)
-#define CMD_TYPE_NORMAL (0x0 << 22)
-#define INDEX_OFFSET (24)
-#define INDEX_MASK (0x3f << 24)
-#define INDEX(i) (i << 24)
-#define DATI_MASK (0x1 << 1)
-#define CMDI_MASK (0x1 << 0)
-#define DTW_1_BITMODE (0x0 << 1)
-#define DTW_4_BITMODE (0x1 << 1)
-#define DTW_8_BITMODE (0x1 << 5) /* CON[DW8]*/
-#define SDBP_PWROFF (0x0 << 8)
-#define SDBP_PWRON (0x1 << 8)
-#define SDVS_1V8 (0x5 << 9)
-#define SDVS_3V0 (0x6 << 9)
-#define ICE_MASK (0x1 << 0)
-#define ICE_STOP (0x0 << 0)
-#define ICS_MASK (0x1 << 1)
-#define ICS_NOTREADY (0x0 << 1)
-#define ICE_OSCILLATE (0x1 << 0)
-#define CEN_MASK (0x1 << 2)
-#define CEN_DISABLE (0x0 << 2)
-#define CEN_ENABLE (0x1 << 2)
-#define CLKD_OFFSET (6)
-#define CLKD_MASK (0x3FF << 6)
-#define DTO_MASK (0xF << 16)
-#define DTO_15THDTO (0xE << 16)
-#define SOFTRESETALL (0x1 << 24)
-#define CC_MASK (0x1 << 0)
-#define TC_MASK (0x1 << 1)
-#define BWR_MASK (0x1 << 4)
-#define BRR_MASK (0x1 << 5)
-#define ERRI_MASK (0x1 << 15)
-#define IE_CC (0x01 << 0)
-#define IE_TC (0x01 << 1)
-#define IE_BWR (0x01 << 4)
-#define IE_BRR (0x01 << 5)
-#define IE_CTO (0x01 << 16)
-#define IE_CCRC (0x01 << 17)
-#define IE_CEB (0x01 << 18)
-#define IE_CIE (0x01 << 19)
-#define IE_DTO (0x01 << 20)
-#define IE_DCRC (0x01 << 21)
-#define IE_DEB (0x01 << 22)
-#define IE_CERR (0x01 << 28)
-#define IE_BADA (0x01 << 29)
-
-#define VS30_3V0SUP (1 << 25)
-#define VS18_1V8SUP (1 << 26)
-
-/* Driver definitions */
-#define MMCSD_SECTOR_SIZE 512
-#define MMC_CARD 0
-#define SD_CARD 1
-#define BYTE_MODE 0
-#define SECTOR_MODE 1
-#define CLK_INITSEQ 0
-#define CLK_400KHZ 1
-#define CLK_MISC 2
-
-#define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK)
-#define MMC_CMD0 (INDEX(0) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE)
-
-/* Clock Configurations and Macros */
-#define MMC_CLOCK_REFERENCE 96 /* MHz */
-
-#define mmc_reg_out(addr, mask, val)\
- writel((readl(addr) & (~(mask))) | ((val) & (mask)), (addr))
-
-int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max);
-
#endif /* MMC_HOST_DEF_H */
diff --git a/arch/arm/include/asm/arch-omap5/mux_dra7xx.h b/arch/arm/include/asm/arch-omap5/mux_dra7xx.h
new file mode 100644
index 0000000..55e9de6
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap5/mux_dra7xx.h
@@ -0,0 +1,344 @@
+/*
+ * (C) Copyright 2013
+ * Texas Instruments Incorporated
+ *
+ * Nishant Kamat <nskamat@ti.com>
+ * Lokesh Vutla <lokeshvutla@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _MUX_DRA7XX_H_
+#define _MUX_DRA7XX_H_
+
+#include <asm/types.h>
+
+#define IEN (1 << 18)
+#define IDIS (0 << 18)
+
+#define PTU (3 << 16)
+#define PTD (1 << 16)
+#define PEN (1 << 16)
+#define PDIS (0 << 16)
+
+#define WKEN (1 << 24)
+#define WKDIS (0 << 24)
+
+#define M0 0
+#define M1 1
+#define M2 2
+#define M3 3
+#define M4 4
+#define M5 5
+#define M6 6
+#define M7 7
+#define M8 8
+#define M9 9
+#define M10 10
+#define M11 11
+#define M12 12
+#define M13 13
+#define M14 14
+#define M15 15
+
+#define SAFE_MODE M15
+
+#define GPMC_AD0 0x000
+#define GPMC_AD1 0x004
+#define GPMC_AD2 0x008
+#define GPMC_AD3 0x00C
+#define GPMC_AD4 0x010
+#define GPMC_AD5 0x014
+#define GPMC_AD6 0x018
+#define GPMC_AD7 0x01C
+#define GPMC_AD8 0x020
+#define GPMC_AD9 0x024
+#define GPMC_AD10 0x028
+#define GPMC_AD11 0x02C
+#define GPMC_AD12 0x030
+#define GPMC_AD13 0x034
+#define GPMC_AD14 0x038
+#define GPMC_AD15 0x03C
+#define GPMC_A0 0x040
+#define GPMC_A1 0x044
+#define GPMC_A2 0x048
+#define GPMC_A3 0x04C
+#define GPMC_A4 0x050
+#define GPMC_A5 0x054
+#define GPMC_A6 0x058
+#define GPMC_A7 0x05C
+#define GPMC_A8 0x060
+#define GPMC_A9 0x064
+#define GPMC_A10 0x068
+#define GPMC_A11 0x06C
+#define GPMC_A12 0x070
+#define GPMC_A13 0x074
+#define GPMC_A14 0x078
+#define GPMC_A15 0x07C
+#define GPMC_A16 0x080
+#define GPMC_A17 0x084
+#define GPMC_A18 0x088
+#define GPMC_A19 0x08C
+#define GPMC_A20 0x090
+#define GPMC_A21 0x094
+#define GPMC_A22 0x098
+#define GPMC_A23 0x09C
+#define GPMC_A24 0x0A0
+#define GPMC_A25 0x0A4
+#define GPMC_A26 0x0A8
+#define GPMC_A27 0x0AC
+#define GPMC_CS1 0x0B0
+#define GPMC_CS0 0x0B4
+#define GPMC_CS2 0x0B8
+#define GPMC_CS3 0x0BC
+#define GPMC_CLK 0x0C0
+#define GPMC_ADVN_ALE 0x0C4
+#define GPMC_OEN_REN 0x0C8
+#define GPMC_WEN 0x0CC
+#define GPMC_BEN0 0x0D0
+#define GPMC_BEN1 0x0D4
+#define GPMC_WAIT0 0x0D8
+#define VIN1A_CLK0 0x0DC
+#define VIN1B_CLK1 0x0E0
+#define VIN1A_DE0 0x0E4
+#define VIN1A_FLD0 0x0E8
+#define VIN1A_HSYNC0 0x0EC
+#define VIN1A_VSYNC0 0x0F0
+#define VIN1A_D0 0x0F4
+#define VIN1A_D1 0x0F8
+#define VIN1A_D2 0x0FC
+#define VIN1A_D3 0x100
+#define VIN1A_D4 0x104
+#define VIN1A_D5 0x108
+#define VIN1A_D6 0x10C
+#define VIN1A_D7 0x110
+#define VIN1A_D8 0x114
+#define VIN1A_D9 0x118
+#define VIN1A_D10 0x11C
+#define VIN1A_D11 0x120
+#define VIN1A_D12 0x124
+#define VIN1A_D13 0x128
+#define VIN1A_D14 0x12C
+#define VIN1A_D15 0x130
+#define VIN1A_D16 0x134
+#define VIN1A_D17 0x138
+#define VIN1A_D18 0x13C
+#define VIN1A_D19 0x140
+#define VIN1A_D20 0x144
+#define VIN1A_D21 0x148
+#define VIN1A_D22 0x14C
+#define VIN1A_D23 0x150
+#define VIN2A_CLK0 0x154
+#define VIN2A_DE0 0x158
+#define VIN2A_FLD0 0x15C
+#define VIN2A_HSYNC0 0x160
+#define VIN2A_VSYNC0 0x164
+#define VIN2A_D0 0x168
+#define VIN2A_D1 0x16C
+#define VIN2A_D2 0x170
+#define VIN2A_D3 0x174
+#define VIN2A_D4 0x178
+#define VIN2A_D5 0x17C
+#define VIN2A_D6 0x180
+#define VIN2A_D7 0x184
+#define VIN2A_D8 0x188
+#define VIN2A_D9 0x18C
+#define VIN2A_D10 0x190
+#define VIN2A_D11 0x194
+#define VIN2A_D12 0x198
+#define VIN2A_D13 0x19C
+#define VIN2A_D14 0x1A0
+#define VIN2A_D15 0x1A4
+#define VIN2A_D16 0x1A8
+#define VIN2A_D17 0x1AC
+#define VIN2A_D18 0x1B0
+#define VIN2A_D19 0x1B4
+#define VIN2A_D20 0x1B8
+#define VIN2A_D21 0x1BC
+#define VIN2A_D22 0x1C0
+#define VIN2A_D23 0x1C4
+#define VOUT1_CLK 0x1C8
+#define VOUT1_DE 0x1CC
+#define VOUT1_FLD 0x1D0
+#define VOUT1_HSYNC 0x1D4
+#define VOUT1_VSYNC 0x1D8
+#define VOUT1_D0 0x1DC
+#define VOUT1_D1 0x1E0
+#define VOUT1_D2 0x1E4
+#define VOUT1_D3 0x1E8
+#define VOUT1_D4 0x1EC
+#define VOUT1_D5 0x1F0
+#define VOUT1_D6 0x1F4
+#define VOUT1_D7 0x1F8
+#define VOUT1_D8 0x1FC
+#define VOUT1_D9 0x200
+#define VOUT1_D10 0x204
+#define VOUT1_D11 0x208
+#define VOUT1_D12 0x20C
+#define VOUT1_D13 0x210
+#define VOUT1_D14 0x214
+#define VOUT1_D15 0x218
+#define VOUT1_D16 0x21C
+#define VOUT1_D17 0x220
+#define VOUT1_D18 0x224
+#define VOUT1_D19 0x228
+#define VOUT1_D20 0x22C
+#define VOUT1_D21 0x230
+#define VOUT1_D22 0x234
+#define VOUT1_D23 0x238
+#define MDIO_MCLK 0x23C
+#define MDIO_D 0x240
+#define RMII_MHZ_50_CLK 0x244
+#define UART3_RXD 0x248
+#define UART3_TXD 0x24C
+#define RGMII0_TXC 0x250
+#define RGMII0_TXCTL 0x254
+#define RGMII0_TXD3 0x258
+#define RGMII0_TXD2 0x25C
+#define RGMII0_TXD1 0x260
+#define RGMII0_TXD0 0x264
+#define RGMII0_RXC 0x268
+#define RGMII0_RXCTL 0x26C
+#define RGMII0_RXD3 0x270
+#define RGMII0_RXD2 0x274
+#define RGMII0_RXD1 0x278
+#define RGMII0_RXD0 0x27C
+#define USB1_DRVVBUS 0x280
+#define USB2_DRVVBUS 0x284
+#define GPIO6_14 0x288
+#define GPIO6_15 0x28C
+#define GPIO6_16 0x290
+#define XREF_CLK0 0x294
+#define XREF_CLK1 0x298
+#define XREF_CLK2 0x29C
+#define XREF_CLK3 0x2A0
+#define MCASP1_ACLKX 0x2A4
+#define MCASP1_FSX 0x2A8
+#define MCASP1_ACLKR 0x2AC
+#define MCASP1_FSR 0x2B0
+#define MCASP1_AXR0 0x2B4
+#define MCASP1_AXR1 0x2B8
+#define MCASP1_AXR2 0x2BC
+#define MCASP1_AXR3 0x2C0
+#define MCASP1_AXR4 0x2C4
+#define MCASP1_AXR5 0x2C8
+#define MCASP1_AXR6 0x2CC
+#define MCASP1_AXR7 0x2D0
+#define MCASP1_AXR8 0x2D4
+#define MCASP1_AXR9 0x2D8
+#define MCASP1_AXR10 0x2DC
+#define MCASP1_AXR11 0x2E0
+#define MCASP1_AXR12 0x2E4
+#define MCASP1_AXR13 0x2E8
+#define MCASP1_AXR14 0x2EC
+#define MCASP1_AXR15 0x2F0
+#define MCASP2_ACLKX 0x2F4
+#define MCASP2_FSX 0x2F8
+#define MCASP2_ACLKR 0x2FC
+#define MCASP2_FSR 0x300
+#define MCASP2_AXR0 0x304
+#define MCASP2_AXR1 0x308
+#define MCASP2_AXR2 0x30C
+#define MCASP2_AXR3 0x310
+#define MCASP2_AXR4 0x314
+#define MCASP2_AXR5 0x318
+#define MCASP2_AXR6 0x31C
+#define MCASP2_AXR7 0x320
+#define MCASP3_ACLKX 0x324
+#define MCASP3_FSX 0x328
+#define MCASP3_AXR0 0x32C
+#define MCASP3_AXR1 0x330
+#define MCASP4_ACLKX 0x334
+#define MCASP4_FSX 0x338
+#define MCASP4_AXR0 0x33C
+#define MCASP4_AXR1 0x340
+#define MCASP5_ACLKX 0x344
+#define MCASP5_FSX 0x348
+#define MCASP5_AXR0 0x34C
+#define MCASP5_AXR1 0x350
+#define MMC1_CLK 0x354
+#define MMC1_CMD 0x358
+#define MMC1_DAT0 0x35C
+#define MMC1_DAT1 0x360
+#define MMC1_DAT2 0x364
+#define MMC1_DAT3 0x368
+#define MMC1_SDCD 0x36C
+#define MMC1_SDWP 0x370
+#define GPIO6_10 0x374
+#define GPIO6_11 0x378
+#define MMC3_CLK 0x37C
+#define MMC3_CMD 0x380
+#define MMC3_DAT0 0x384
+#define MMC3_DAT1 0x388
+#define MMC3_DAT2 0x38C
+#define MMC3_DAT3 0x390
+#define MMC3_DAT4 0x394
+#define MMC3_DAT5 0x398
+#define MMC3_DAT6 0x39C
+#define MMC3_DAT7 0x3A0
+#define SPI1_SCLK 0x3A4
+#define SPI1_D1 0x3A8
+#define SPI1_D0 0x3AC
+#define SPI1_CS0 0x3B0
+#define SPI1_CS1 0x3B4
+#define SPI1_CS2 0x3B8
+#define SPI1_CS3 0x3BC
+#define SPI2_SCLK 0x3C0
+#define SPI2_D1 0x3C4
+#define SPI2_D0 0x3C8
+#define SPI2_CS0 0x3CC
+#define DCAN1_TX 0x3D0
+#define DCAN1_RX 0x3D4
+#define DCAN2_TX 0x3D8
+#define DCAN2_RX 0x3DC
+#define UART1_RXD 0x3E0
+#define UART1_TXD 0x3E4
+#define UART1_CTSN 0x3E8
+#define UART1_RTSN 0x3EC
+#define UART2_RXD 0x3F0
+#define UART2_TXD 0x3F4
+#define UART2_CTSN 0x3F8
+#define UART2_RTSN 0x3FC
+#define I2C1_SDA 0x400
+#define I2C1_SCL 0x404
+#define I2C2_SDA 0x408
+#define I2C2_SCL 0x40C
+#define I2C3_SDA 0x410
+#define I2C3_SCL 0x414
+#define WAKEUP0 0x418
+#define WAKEUP1 0x41C
+#define WAKEUP2 0x420
+#define WAKEUP3 0x424
+#define ON_OFF 0x428
+#define RTC_PORZ 0x42C
+#define TMS 0x430
+#define TDI 0x434
+#define TDO 0x438
+#define TCLK 0x43C
+#define TRSTN 0x440
+#define RTCK 0x444
+#define EMU0 0x448
+#define EMU1 0x44C
+#define EMU2 0x450
+#define EMU3 0x454
+#define EMU4 0x458
+#define RESETN 0x45C
+#define NMIN 0x460
+#define RSTOUTN 0x464
+
+#endif /* _MUX_DRA7XX_H_ */
diff --git a/arch/arm/include/asm/arch-omap5/mux_omap5.h b/arch/arm/include/asm/arch-omap5/mux_omap5.h
index 4a6ed8b..34b0dbd 100644
--- a/arch/arm/include/asm/arch-omap5/mux_omap5.h
+++ b/arch/arm/include/asm/arch-omap5/mux_omap5.h
@@ -28,14 +28,6 @@
#include <asm/types.h>
-struct pad_conf_entry {
-
- u16 offset;
-
- u16 val;
-
-};
-
#ifdef CONFIG_OFF_PADCONF
#define OFF_PD (1 << 12)
#define OFF_PU (3 << 12)
diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h
index 9dce49a..b632635 100644
--- a/arch/arm/include/asm/arch-omap5/omap.h
+++ b/arch/arm/include/asm/arch-omap5/omap.h
@@ -57,7 +57,10 @@
/* To be verified */
#define OMAP5430_CONTROL_ID_CODE_ES1_0 0x0B94202F
+#define OMAP5430_CONTROL_ID_CODE_ES2_0 0x1B94202F
#define OMAP5432_CONTROL_ID_CODE_ES1_0 0x0B99802F
+#define OMAP5432_CONTROL_ID_CODE_ES2_0 0x1B99802F
+#define DRA752_CONTROL_ID_CODE_ES1_0 0x0B99002F
/* STD_FUSE_PROD_ID_1 */
#define STD_FUSE_PROD_ID_1 (CTRL_BASE + 0x218)
@@ -131,87 +134,6 @@ struct s32ktimer {
#define DEVICE_TYPE_MASK (0x7 << DEVICE_TYPE_SHIFT)
#define DEVICE_GP 0x3
-struct omap_sys_ctrl_regs {
- u32 pad0[77]; /* 0x4A002000 */
- u32 control_status; /* 0x4A002134 */
- u32 pad1[794]; /* 0x4A002138 */
- u32 control_paconf_global; /* 0x4A002DA0 */
- u32 control_paconf_mode; /* 0x4A002DA4 */
- u32 control_smart1io_padconf_0; /* 0x4A002DA8 */
- u32 control_smart1io_padconf_1; /* 0x4A002DAC */
- u32 control_smart1io_padconf_2; /* 0x4A002DB0 */
- u32 control_smart2io_padconf_0; /* 0x4A002DB4 */
- u32 control_smart2io_padconf_1; /* 0x4A002DB8 */
- u32 control_smart2io_padconf_2; /* 0x4A002DBC */
- u32 control_smart3io_padconf_0; /* 0x4A002DC0 */
- u32 control_smart3io_padconf_1; /* 0x4A002DC4 */
- u32 pad2[14];
- u32 control_pbias; /* 0x4A002E00 */
- u32 control_i2c_0; /* 0x4A002E04 */
- u32 control_camera_rx; /* 0x4A002E08 */
- u32 control_hdmi_tx_phy; /* 0x4A002E0C */
- u32 control_uniportm; /* 0x4A002E10 */
- u32 control_dsiphy; /* 0x4A002E14 */
- u32 control_mcbsplp; /* 0x4A002E18 */
- u32 control_usb2phycore; /* 0x4A002E1C */
- u32 control_hdmi_1; /*0x4A002E20*/
- u32 control_hsi; /*0x4A002E24*/
- u32 pad3[2];
- u32 control_ddr3ch1_0; /*0x4A002E30*/
- u32 control_ddr3ch2_0; /*0x4A002E34*/
- u32 control_ddrch1_0; /*0x4A002E38*/
- u32 control_ddrch1_1; /*0x4A002E3C*/
- u32 control_ddrch2_0; /*0x4A002E40*/
- u32 control_ddrch2_1; /*0x4A002E44*/
- u32 control_lpddr2ch1_0; /*0x4A002E48*/
- u32 control_lpddr2ch1_1; /*0x4A002E4C*/
- u32 control_ddrio_0; /*0x4A002E50*/
- u32 control_ddrio_1; /*0x4A002E54*/
- u32 control_ddrio_2; /*0x4A002E58*/
- u32 control_hyst_1; /*0x4A002E5C*/
- u32 control_usbb_hsic_control; /*0x4A002E60*/
- u32 control_c2c; /*0x4A002E64*/
- u32 control_core_control_spare_rw; /*0x4A002E68*/
- u32 control_core_control_spare_r; /*0x4A002E6C*/
- u32 control_core_control_spare_r_c0; /*0x4A002E70*/
- u32 control_srcomp_north_side; /*0x4A002E74*/
- u32 control_srcomp_south_side; /*0x4A002E78*/
- u32 control_srcomp_east_side; /*0x4A002E7C*/
- u32 control_srcomp_west_side; /*0x4A002E80*/
- u32 control_srcomp_code_latch; /*0x4A002E84*/
- u32 pad4[3679394];
- u32 control_port_emif1_sdram_config; /*0x4AE0C110*/
- u32 control_port_emif1_lpddr2_nvm_config; /*0x4AE0C114*/
- u32 control_port_emif2_sdram_config; /*0x4AE0C118*/
- u32 pad5[10];
- u32 control_emif1_sdram_config_ext; /* 0x4AE0C144 */
- u32 control_emif2_sdram_config_ext; /* 0x4AE0C148 */
- u32 pad6[789];
- u32 control_smart1nopmio_padconf_0; /* 0x4AE0CDA0 */
- u32 control_smart1nopmio_padconf_1; /* 0x4AE0CDA4 */
- u32 control_padconf_mode; /* 0x4AE0CDA8 */
- u32 control_xtal_oscillator; /* 0x4AE0CDAC */
- u32 control_i2c_2; /* 0x4AE0CDB0 */
- u32 control_ckobuffer; /* 0x4AE0CDB4 */
- u32 control_wkup_control_spare_rw; /* 0x4AE0CDB8 */
- u32 control_wkup_control_spare_r; /* 0x4AE0CDBC */
- u32 control_wkup_control_spare_r_c0; /* 0x4AE0CDC0 */
- u32 control_srcomp_east_side_wkup; /* 0x4AE0CDC4 */
- u32 control_efuse_1; /* 0x4AE0CDC8 */
- u32 control_efuse_2; /* 0x4AE0CDCC */
- u32 control_efuse_3; /* 0x4AE0CDD0 */
- u32 control_efuse_4; /* 0x4AE0CDD4 */
- u32 control_efuse_5; /* 0x4AE0CDD8 */
- u32 control_efuse_6; /* 0x4AE0CDDC */
- u32 control_efuse_7; /* 0x4AE0CDE0 */
- u32 control_efuse_8; /* 0x4AE0CDE4 */
- u32 control_efuse_9; /* 0x4AE0CDE8 */
- u32 control_efuse_10; /* 0x4AE0CDEC */
- u32 control_efuse_11; /* 0x4AE0CDF0 */
- u32 control_efuse_12; /* 0x4AE0CDF4 */
- u32 control_efuse_13; /* 0x4AE0CDF8 */
-};
-
/* Output impedance control */
#define ds_120_ohm 0x0
#define ds_60_ohm 0x1
@@ -247,6 +169,12 @@ struct omap_sys_ctrl_regs {
#define DDR_IO_1_VREF_CELLS_DDR3_VALUE 0xBC6318DC
#define DDR_IO_2_VREF_CELLS_DDR3_VALUE 0x0
+#define DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2 0x7C7C7C7C
+#define DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2 0x64656465
+#define DDR_IO_0_VREF_CELLS_DDR3_VALUE_ES2 0xBAE8C631
+#define DDR_IO_1_VREF_CELLS_DDR3_VALUE_ES2 0xB46318D8
+#define DDR_IO_2_VREF_CELLS_DDR3_VALUE_ES2 0x84210000
+
#define EFUSE_1 0x45145100
#define EFUSE_2 0x45145100
#define EFUSE_3 0x45145100
@@ -271,7 +199,11 @@ struct omap_sys_ctrl_regs {
#define OMAP5_SRAM_SCRATCH_EMIF_SIZE (SRAM_SCRATCH_SPACE_ADDR + 0x4)
#define OMAP5_SRAM_SCRATCH_EMIF_T_NUM (SRAM_SCRATCH_SPACE_ADDR + 0xC)
#define OMAP5_SRAM_SCRATCH_EMIF_T_DEN (SRAM_SCRATCH_SPACE_ADDR + 0x10)
-#define OMAP5_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x14)
+#define OMAP_SRAM_SCRATCH_PRCM_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x14)
+#define OMAP_SRAM_SCRATCH_DPLLS_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x18)
+#define OMAP_SRAM_SCRATCH_VCORES_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x1C)
+#define OMAP5_SRAM_SCRATCH_SYS_CTRL (SRAM_SCRATCH_SPACE_ADDR + 0x20)
+#define OMAP5_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x24)
/* Silicon revisions */
#define OMAP4430_SILICON_ID_INVALID 0xFFFFFFFF
@@ -298,7 +230,26 @@ struct omap_sys_ctrl_regs {
#define CH_FLAGS_CHFLASH (0x1 << 2)
#define CH_FLAGS_CHMMCSD (0x1 << 3)
+/* CONTROL_SRCOMP_XXX_SIDE */
+#define OVERRIDE_XS_SHIFT 30
+#define OVERRIDE_XS_MASK (1 << 30)
+#define SRCODE_READ_XS_SHIFT 12
+#define SRCODE_READ_XS_MASK (0xff << 12)
+#define PWRDWN_XS_SHIFT 11
+#define PWRDWN_XS_MASK (1 << 11)
+#define DIVIDE_FACTOR_XS_SHIFT 4
+#define DIVIDE_FACTOR_XS_MASK (0x7f << 4)
+#define MULTIPLY_FACTOR_XS_SHIFT 1
+#define MULTIPLY_FACTOR_XS_MASK (0x7 << 1)
+#define SRCODE_OVERRIDE_SEL_XS_SHIFT 0
+#define SRCODE_OVERRIDE_SEL_XS_MASK (1 << 0)
+
#ifndef __ASSEMBLY__
+struct srcomp_params {
+ s8 divide_factor;
+ s8 multiply_factor;
+};
+
struct omap_boot_parameters {
char *boot_message;
unsigned int mem_boot_descriptor;
@@ -306,5 +257,15 @@ struct omap_boot_parameters {
unsigned char reset_reason;
unsigned char ch_flags;
};
+
+struct ctrl_ioregs {
+ u32 ctrl_ddrch;
+ u32 ctrl_lpddr2ch;
+ u32 ctrl_ddr3ch;
+ u32 ctrl_ddrio_0;
+ u32 ctrl_ddrio_1;
+ u32 ctrl_ddrio_2;
+ u32 ctrl_emif_sdram_config_ext;
+};
#endif /* __ASSEMBLY__ */
#endif
diff --git a/arch/arm/include/asm/arch-omap5/spl.h b/arch/arm/include/asm/arch-omap5/spl.h
index d125c61..323cd63 100644
--- a/arch/arm/include/asm/arch-omap5/spl.h
+++ b/arch/arm/include/asm/arch-omap5/spl.h
@@ -27,7 +27,7 @@
#define BOOT_DEVICE_XIP 1
#define BOOT_DEVICE_XIPWAIT 2
#define BOOT_DEVICE_NAND 3
-#define BOOT_DEVICE_ONE_NAND 4
+#define BOOT_DEVICE_ONENAND 4
#define BOOT_DEVICE_MMC1 5
#define BOOT_DEVICE_MMC2 6
#define BOOT_DEVICE_MMC2_2 7
diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h
index 72e9df7..e66ab44 100644
--- a/arch/arm/include/asm/arch-omap5/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap5/sys_proto.h
@@ -25,9 +25,13 @@
#include <asm/io.h>
#include <asm/arch/clocks.h>
#include <asm/omap_common.h>
-#include <asm/arch/mux_omap5.h>
#include <asm/arch/clocks.h>
+struct pad_conf_entry {
+ u32 offset;
+ u32 val;
+};
+
struct omap_sysinfo {
char *board_string;
};
@@ -44,7 +48,7 @@ u32 wait_on_value(u32, u32, void *, u32);
void sdelay(unsigned long);
void setup_clocks_for_console(void);
void prcm_init(void);
-void bypass_dpll(u32 *const base);
+void bypass_dpll(u32 const base);
void freq_update_core(void);
u32 get_sys_clk_freq(void);
u32 omap5_ddr_clk(void);
@@ -58,6 +62,8 @@ void omap_vc_init(u16 speed_khz);
int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data);
u32 warm_reset(void);
void force_emif_self_refresh(void);
+void get_ioregs(const struct ctrl_ioregs **regs);
+void srcomp_enable(void);
/*
* This is used to verify if the configuration header
diff --git a/arch/arm/include/asm/arch-tegra/mmc.h b/arch/arm/include/asm/arch-tegra/mmc.h
index 5c95047..71ad407 100644
--- a/arch/arm/include/asm/arch-tegra/mmc.h
+++ b/arch/arm/include/asm/arch-tegra/mmc.h
@@ -22,6 +22,6 @@
#ifndef _TEGRA_MMC_H_
#define _TEGRA_MMC_H_
-int tegra_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio);
+void tegra_mmc_init(void);
#endif /* _TEGRA_MMC_H_ */
diff --git a/arch/arm/include/asm/arch-tegra/tegra_i2c.h b/arch/arm/include/asm/arch-tegra/tegra_i2c.h
index 2650744..853e59b 100644
--- a/arch/arm/include/asm/arch-tegra/tegra_i2c.h
+++ b/arch/arm/include/asm/arch-tegra/tegra_i2c.h
@@ -105,6 +105,7 @@ struct i2c_ctlr {
u32 sl_delay_count; /* 3C: I2C_I2C_SL_DELAY_COUNT */
u32 reserved_2[4]; /* 40: */
struct i2c_control control; /* 50 ~ 68 */
+ u32 clk_div; /* 6C: I2C_I2C_CLOCK_DIVISOR */
};
/* bit fields definitions for IO Packet Header 1 format */
@@ -154,6 +155,11 @@ struct i2c_ctlr {
#define I2C_INT_ARBITRATION_LOST_SHIFT 2
#define I2C_INT_ARBITRATION_LOST_MASK (1 << I2C_INT_ARBITRATION_LOST_SHIFT)
+/* I2C_CLK_DIVISOR_REGISTER */
+#define CLK_DIV_STD_FAST_MODE 0x19
+#define CLK_DIV_HS_MODE 1
+#define CLK_MULT_STD_FAST_MODE 8
+
/**
* Returns the bus number of the DVC controller
*
diff --git a/arch/arm/include/asm/arch-tegra/tegra_mmc.h b/arch/arm/include/asm/arch-tegra/tegra_mmc.h
index dd746ca..2a3f830 100644
--- a/arch/arm/include/asm/arch-tegra/tegra_mmc.h
+++ b/arch/arm/include/asm/arch-tegra/tegra_mmc.h
@@ -22,10 +22,9 @@
#ifndef __TEGRA_MMC_H_
#define __TEGRA_MMC_H_
-#define TEGRA_SDMMC1_BASE 0xC8000000
-#define TEGRA_SDMMC2_BASE 0xC8000200
-#define TEGRA_SDMMC3_BASE 0xC8000400
-#define TEGRA_SDMMC4_BASE 0xC8000600
+#include <fdtdec.h>
+
+#define MAX_HOSTS 4 /* Max number of 'hosts'/controllers */
#ifndef __ASSEMBLY__
struct tegra_mmc {
@@ -62,12 +61,30 @@ struct tegra_mmc {
unsigned char admaerr; /* offset 54h */
unsigned char res4[3]; /* RESERVED, offset 55h-57h */
unsigned long admaaddr; /* offset 58h-5Fh */
- unsigned char res5[0x9c]; /* RESERVED, offset 60h-FBh */
+ unsigned char res5[0xa0]; /* RESERVED, offset 60h-FBh */
unsigned short slotintstatus; /* offset FCh */
unsigned short hcver; /* HOST Version */
- unsigned char res6[0x100]; /* RESERVED, offset 100h-1FFh */
+ unsigned int venclkctl; /* _VENDOR_CLOCK_CNTRL_0, 100h */
+ unsigned int venspictl; /* _VENDOR_SPI_CNTRL_0, 104h */
+ unsigned int venspiintsts; /* _VENDOR_SPI_INT_STATUS_0, 108h */
+ unsigned int venceatactl; /* _VENDOR_CEATA_CNTRL_0, 10Ch */
+ unsigned int venbootctl; /* _VENDOR_BOOT_CNTRL_0, 110h */
+ unsigned int venbootacktout; /* _VENDOR_BOOT_ACK_TIMEOUT, 114h */
+ unsigned int venbootdattout; /* _VENDOR_BOOT_DAT_TIMEOUT, 118h */
+ unsigned int vendebouncecnt; /* _VENDOR_DEBOUNCE_COUNT_0, 11Ch */
+ unsigned int venmiscctl; /* _VENDOR_MISC_CNTRL_0, 120h */
+ unsigned int res6[47]; /* 0x124 ~ 0x1DC */
+ unsigned int sdmemcmppadctl; /* _SDMEMCOMPPADCTRL_0, 1E0h */
+ unsigned int autocalcfg; /* _AUTO_CAL_CONFIG_0, 1E4h */
+ unsigned int autocalintval; /* _AUTO_CAL_INTERVAL_0, 1E8h */
+ unsigned int autocalsts; /* _AUTO_CAL_STATUS_0, 1ECh */
};
+#define TEGRA_MMC_PWRCTL_SD_BUS_POWER (1 << 0)
+#define TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V1_8 (5 << 1)
+#define TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V3_0 (6 << 1)
+#define TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V3_3 (7 << 1)
+
#define TEGRA_MMC_HOSTCTL_DMASEL_MASK (3 << 3)
#define TEGRA_MMC_HOSTCTL_DMASEL_SDMA (0 << 3)
#define TEGRA_MMC_HOSTCTL_DMASEL_ADMA2_32BIT (2 << 3)
@@ -117,15 +134,26 @@ struct tegra_mmc {
#define TEGRA_MMC_NORINTSIGEN_XFER_COMPLETE (1 << 1)
+/* SDMMC1/3 settings from section 24.6 of T30 TRM */
+#define MEMCOMP_PADCTRL_VREF 7
+#define AUTO_CAL_ENABLED (1 << 29)
+#define AUTO_CAL_PD_OFFSET (0x70 << 8)
+#define AUTO_CAL_PU_OFFSET (0x62 << 0)
+
struct mmc_host {
struct tegra_mmc *reg;
+ int id; /* device id/number, 0-3 */
+ int enabled; /* 1 to enable, 0 to disable */
+ int width; /* Bus Width, 1, 4 or 8 */
+ enum periph_id mmc_id; /* Peripheral ID: PERIPH_ID_... */
+ struct fdt_gpio_state cd_gpio; /* Change Detect GPIO */
+ struct fdt_gpio_state pwr_gpio; /* Power GPIO */
+ struct fdt_gpio_state wp_gpio; /* Write Protect GPIO */
unsigned int version; /* SDHCI spec. version */
unsigned int clock; /* Current clock (MHz) */
- unsigned int base; /* Base address, SDMMC1/2/3/4 */
- enum periph_id mmc_id; /* Peripheral ID: PERIPH_ID_... */
- int pwr_gpio; /* Power GPIO */
- int cd_gpio; /* Change Detect GPIO */
};
+void pad_init_mmc(struct mmc_host *host);
+
#endif /* __ASSEMBLY__ */
#endif /* __TEGRA_MMC_H_ */
diff --git a/arch/arm/include/asm/arch-tegra20/usb.h b/arch/arm/include/asm/arch-tegra/usb.h
index fdbd127..ef6c089 100644
--- a/arch/arm/include/asm/arch-tegra20/usb.h
+++ b/arch/arm/include/asm/arch-tegra/usb.h
@@ -243,29 +243,7 @@ struct usb_ctlr {
#define VBUS_VLD_STS (1 << 26)
-/* Change the USB host port into host mode */
-void usb_set_host_mode(void);
-
/* Setup USB on the board */
int board_usb_init(const void *blob);
-/**
- * Start up the given port number (ports are numbered from 0 on each board).
- * This returns values for the appropriate hccr and hcor addresses to use for
- * USB EHCI operations.
- *
- * @param portnum port number to start
- * @param hccr returns start address of EHCI HCCR registers
- * @param hcor returns start address of EHCI HCOR registers
- * @return 0 if ok, -1 on error (generally invalid port number)
- */
-int tegrausb_start_port(int portnum, u32 *hccr, u32 *hcor);
-
-/**
- * Stop the current port
- *
- * @return 0 if ok, -1 if no port was active
- */
-int tegrausb_stop_port(int portnum);
-
#endif /* _TEGRA_USB_H_ */
diff --git a/arch/arm/include/asm/arch-tegra114/gp_padctrl.h b/arch/arm/include/asm/arch-tegra114/gp_padctrl.h
index c538bdd..1ef1a14 100644
--- a/arch/arm/include/asm/arch-tegra114/gp_padctrl.h
+++ b/arch/arm/include/asm/arch-tegra114/gp_padctrl.h
@@ -27,7 +27,7 @@ struct apb_misc_gp_ctlr {
u32 emu_revid; /* 0x60: APB_MISC_GP_EMU_REVID */
u32 xactor_scratch; /* 0x64: APB_MISC_GP_XACTOR_SCRATCH */
u32 aocfg1; /* 0x68: APB_MISC_GP_AOCFG1PADCTRL */
- u32 aocfg2; /* 0x6c: APB_MISC_GP_AOCFG2PADCTRL */
+ u32 aocfg2; /* 0x6C: APB_MISC_GP_AOCFG2PADCTRL */
u32 atcfg1; /* 0x70: APB_MISC_GP_ATCFG1PADCTRL */
u32 atcfg2; /* 0x74: APB_MISC_GP_ATCFG2PADCTRL */
u32 atcfg3; /* 0x78: APB_MISC_GP_ATCFG3PADCTRL */
@@ -35,25 +35,43 @@ struct apb_misc_gp_ctlr {
u32 atcfg5; /* 0x80: APB_MISC_GP_ATCFG5PADCTRL */
u32 cdev1cfg; /* 0x84: APB_MISC_GP_CDEV1CFGPADCTRL */
u32 cdev2cfg; /* 0x88: APB_MISC_GP_CDEV2CFGPADCTRL */
- u32 csuscfg; /* 0x8C: APB_MISC_GP_CSUSCFGPADCTRL */
+ u32 reserved1; /* 0x8C: */
u32 dap1cfg; /* 0x90: APB_MISC_GP_DAP1CFGPADCTRL */
u32 dap2cfg; /* 0x94: APB_MISC_GP_DAP2CFGPADCTRL */
u32 dap3cfg; /* 0x98: APB_MISC_GP_DAP3CFGPADCTRL */
u32 dap4cfg; /* 0x9C: APB_MISC_GP_DAP4CFGPADCTRL */
u32 dbgcfg; /* 0xA0: APB_MISC_GP_DBGCFGPADCTRL */
- u32 lcdcfg1; /* 0xA4: APB_MISC_GP_LCDCFG1PADCTRL */
- u32 lcdcfg2; /* 0xA8: APB_MISC_GP_LCDCFG2PADCTRL */
- u32 sdio2cfg; /* 0xAC: APB_MISC_GP_SDIO2CFGPADCTRL */
+ u32 reserved2[3]; /* 0xA4 - 0xAC: */
u32 sdio3cfg; /* 0xB0: APB_MISC_GP_SDIO3CFGPADCTRL */
u32 spicfg; /* 0xB4: APB_MISC_GP_SPICFGPADCTRL */
u32 uaacfg; /* 0xB8: APB_MISC_GP_UAACFGPADCTRL */
u32 uabcfg; /* 0xBC: APB_MISC_GP_UABCFGPADCTRL */
u32 uart2cfg; /* 0xC0: APB_MISC_GP_UART2CFGPADCTRL */
u32 uart3cfg; /* 0xC4: APB_MISC_GP_UART3CFGPADCTRL */
- u32 vicfg1; /* 0xC8: APB_MISC_GP_VICFG1PADCTRL */
- u32 vivttgen; /* 0xCC: APB_MISC_GP_VIVTTGENPADCTRL */
- u32 reserved1[7]; /* 0xD0-0xE8: */
+ u32 reserved3[9]; /* 0xC8-0xE8: */
u32 sdio1cfg; /* 0xEC: APB_MISC_GP_SDIO1CFGPADCTRL */
+ u32 reserved4[3]; /* 0xF0-0xF8: */
+ u32 ddccfg; /* 0xFC: APB_MISC_GP_DDCCFGPADCTRL */
+ u32 gmacfg; /* 0x100: APB_MISC_GP_GMACFGPADCTRL */
+ u32 reserved5[3]; /* 0x104-0x10C: */
+ u32 gmecfg; /* 0x110: APB_MISC_GP_GMECFGPADCTRL */
+ u32 gmfcfg; /* 0x114: APB_MISC_GP_GMFCFGPADCTRL */
+ u32 gmgcfg; /* 0x118: APB_MISC_GP_GMGCFGPADCTRL */
+ u32 gmhcfg; /* 0x11C: APB_MISC_GP_GMHCFGPADCTRL */
+ u32 owrcfg; /* 0x120: APB_MISC_GP_OWRCFGPADCTRL */
+ u32 uadcfg; /* 0x124: APB_MISC_GP_UADCFGPADCTRL */
+ u32 reserved6; /* 0x128: */
+ u32 dev3cfg; /* 0x12C: APB_MISC_GP_DEV3CFGPADCTRL */
+ u32 reserved7[2]; /* 0x130 - 0x134: */
+ u32 ceccfg; /* 0x138: APB_MISC_GP_CECCFGPADCTRL */
+ u32 reserved8[22]; /* 0x13C - 0x190: */
+ u32 atcfg6; /* 0x194: APB_MISC_GP_ATCFG6PADCTRL */
+ u32 dap5cfg; /* 0x198: APB_MISC_GP_DAP5CFGPADCTRL */
+ u32 vbuscfg; /* 0x19C: APB_MISC_GP_USBVBUSENCFGPADCTRL */
+ u32 aocfg3; /* 0x1A0: APB_MISC_GP_AOCFG3PADCTRL */
+ u32 hvccfg0; /* 0x1A4: APB_MISC_GP_HVCCFG0PADCTRL */
+ u32 sdio4cfg; /* 0x1A8: APB_MISC_GP_SDIO4CFGPADCTRL */
+ u32 aocfg0; /* 0x1AC: APB_MISC_GP_AOCFG0PADCTRL */
};
#endif /* _TEGRA114_GP_PADCTRL_H_ */
diff --git a/arch/arm/include/asm/arch-tegra114/pinmux.h b/arch/arm/include/asm/arch-tegra114/pinmux.h
index fd22930..9c22c08 100644
--- a/arch/arm/include/asm/arch-tegra114/pinmux.h
+++ b/arch/arm/include/asm/arch-tegra114/pinmux.h
@@ -50,72 +50,12 @@ enum pmux_pingrp {
PINGRP_SDMMC1_DAT2,
PINGRP_SDMMC1_DAT1,
PINGRP_SDMMC1_DAT0,
- PINGRP_GPIO_PV2,
- PINGRP_GPIO_PV3,
- PINGRP_CLK2_OUT,
+ PINGRP_CLK2_OUT = PINGRP_SDMMC1_DAT0 + 3,
PINGRP_CLK2_REQ,
- PINGRP_LCD_PWR1,
- PINGRP_LCD_PWR2,
- PINGRP_LCD_SDIN,
- PINGRP_LCD_SDOUT,
- PINGRP_LCD_WR_N,
- PINGRP_LCD_CS0_N,
- PINGRP_LCD_DC0,
- PINGRP_LCD_SCK,
- PINGRP_LCD_PWR0,
- PINGRP_LCD_PCLK,
- PINGRP_LCD_DE,
- PINGRP_LCD_HSYNC,
- PINGRP_LCD_VSYNC,
- PINGRP_LCD_D0,
- PINGRP_LCD_D1,
- PINGRP_LCD_D2,
- PINGRP_LCD_D3,
- PINGRP_LCD_D4,
- PINGRP_LCD_D5,
- PINGRP_LCD_D6,
- PINGRP_LCD_D7,
- PINGRP_LCD_D8,
- PINGRP_LCD_D9,
- PINGRP_LCD_D10,
- PINGRP_LCD_D11,
- PINGRP_LCD_D12,
- PINGRP_LCD_D13,
- PINGRP_LCD_D14,
- PINGRP_LCD_D15,
- PINGRP_LCD_D16,
- PINGRP_LCD_D17,
- PINGRP_LCD_D18,
- PINGRP_LCD_D19,
- PINGRP_LCD_D20,
- PINGRP_LCD_D21,
- PINGRP_LCD_D22,
- PINGRP_LCD_D23,
- PINGRP_LCD_CS1_N,
- PINGRP_LCD_M1,
- PINGRP_LCD_DC1,
- PINGRP_HDMI_INT,
+ PINGRP_HDMI_INT = PINGRP_CLK2_REQ + 41,
PINGRP_DDC_SCL,
PINGRP_DDC_SDA,
- PINGRP_CRT_HSYNC,
- PINGRP_CRT_VSYNC,
- PINGRP_VI_D0,
- PINGRP_VI_D1,
- PINGRP_VI_D2,
- PINGRP_VI_D3,
- PINGRP_VI_D4,
- PINGRP_VI_D5,
- PINGRP_VI_D6,
- PINGRP_VI_D7,
- PINGRP_VI_D8,
- PINGRP_VI_D9,
- PINGRP_VI_D10,
- PINGRP_VI_D11,
- PINGRP_VI_PCLK,
- PINGRP_VI_MCLK,
- PINGRP_VI_VSYNC,
- PINGRP_VI_HSYNC,
- PINGRP_UART2_RXD,
+ PINGRP_UART2_RXD = PINGRP_DDC_SDA + 19,
PINGRP_UART2_TXD,
PINGRP_UART2_RTS_N,
PINGRP_UART2_CTS_N,
@@ -186,8 +126,7 @@ enum pmux_pingrp {
PINGRP_SDMMC4_DAT5,
PINGRP_SDMMC4_DAT6,
PINGRP_SDMMC4_DAT7,
- PINGRP_SDMMC4_RST_N,
- PINGRP_CAM_MCLK,
+ PINGRP_CAM_MCLK = PINGRP_SDMMC4_DAT7 + 2,
PINGRP_GPIO_PCC1,
PINGRP_GPIO_PBB0,
PINGRP_CAM_I2C_SCL,
@@ -212,12 +151,7 @@ enum pmux_pingrp {
PINGRP_KB_ROW8,
PINGRP_KB_ROW9,
PINGRP_KB_ROW10,
- PINGRP_KB_ROW11,
- PINGRP_KB_ROW12,
- PINGRP_KB_ROW13,
- PINGRP_KB_ROW14,
- PINGRP_KB_ROW15,
- PINGRP_KB_COL0,
+ PINGRP_KB_COL0 = PINGRP_KB_ROW10 + 6,
PINGRP_KB_COL1,
PINGRP_KB_COL2,
PINGRP_KB_COL3,
@@ -244,47 +178,30 @@ enum pmux_pingrp {
PINGRP_DAP2_DIN,
PINGRP_DAP2_DOUT,
PINGRP_DAP2_SCLK,
- PINGRP_SPI2_MOSI,
- PINGRP_SPI2_MISO,
- PINGRP_SPI2_CS0_N,
- PINGRP_SPI2_SCK,
- PINGRP_SPI1_MOSI,
- PINGRP_SPI1_SCK,
- PINGRP_SPI1_CS0_N,
- PINGRP_SPI1_MISO,
- PINGRP_SPI2_CS1_N,
- PINGRP_SPI2_CS2_N,
- PINGRP_SDMMC3_CLK,
+ PINGRP_DVFS_PWM,
+ PINGRP_GPIO_X1_AUD,
+ PINGRP_GPIO_X3_AUD,
+ PINGRP_DVFS_CLK,
+ PINGRP_GPIO_X4_AUD,
+ PINGRP_GPIO_X5_AUD,
+ PINGRP_GPIO_X6_AUD,
+ PINGRP_GPIO_X7_AUD,
+ PINGRP_SDMMC3_CLK = PINGRP_GPIO_X7_AUD + 3,
PINGRP_SDMMC3_CMD,
PINGRP_SDMMC3_DAT0,
PINGRP_SDMMC3_DAT1,
PINGRP_SDMMC3_DAT2,
PINGRP_SDMMC3_DAT3,
- PINGRP_SDMMC3_DAT4,
- PINGRP_SDMMC3_DAT5,
- PINGRP_SDMMC3_DAT6,
- PINGRP_SDMMC3_DAT7,
- PINGRP_PEX_L0_PRSNT_N,
- PINGRP_PEX_L0_RST_N,
- PINGRP_PEX_L0_CLKREQ_N,
- PINGRP_PEX_WAKE_N,
- PINGRP_PEX_L1_PRSNT_N,
- PINGRP_PEX_L1_RST_N,
- PINGRP_PEX_L1_CLKREQ_N,
- PINGRP_PEX_L2_PRSNT_N,
- PINGRP_PEX_L2_RST_N,
- PINGRP_PEX_L2_CLKREQ_N,
- PINGRP_HDMI_CEC, /* offset 0x33e0 */
+ PINGRP_HDMI_CEC = PINGRP_SDMMC3_DAT3 + 15, /* offset 0x33e0 */
PINGRP_SDMMC1_WP_N,
PINGRP_SDMMC3_CD_N,
- PINGRP_SPI1_CS1_N,
- PINGRP_SPI1_CS2_N,
- PINGRP_USB_VBUS_EN0, /* offset 0x33f4 */
+ PINGRP_GPIO_W2_AUD,
+ PINGRP_GPIO_W3_AUD,
+ PINGRP_USB_VBUS_EN0, /* offset 0x33f4 */
PINGRP_USB_VBUS_EN1,
PINGRP_SDMMC3_CLK_LB_IN,
PINGRP_SDMMC3_CLK_LB_OUT,
- PINGRP_NAND_GMI_CLK_LB,
- PINGRP_RESET_OUT_N,
+ PINGRP_RESET_OUT_N = PINGRP_SDMMC3_CLK_LB_OUT + 2,
PINGRP_COUNT,
};
@@ -298,41 +215,35 @@ enum pdrive_pingrp {
PDRIVE_PINGROUP_AT5,
PDRIVE_PINGROUP_CDEV1,
PDRIVE_PINGROUP_CDEV2,
- PDRIVE_PINGROUP_CSUS,
- PDRIVE_PINGROUP_DAP1,
+ PDRIVE_PINGROUP_DAP1 = 10, /* offset 0x890 */
PDRIVE_PINGROUP_DAP2,
PDRIVE_PINGROUP_DAP3,
PDRIVE_PINGROUP_DAP4,
PDRIVE_PINGROUP_DBG,
- PDRIVE_PINGROUP_LCD1,
- PDRIVE_PINGROUP_LCD2,
- PDRIVE_PINGROUP_SDIO2,
- PDRIVE_PINGROUP_SDIO3,
+ PDRIVE_PINGROUP_SDIO3 = 18, /* offset 0x8B0 */
PDRIVE_PINGROUP_SPI,
PDRIVE_PINGROUP_UAA,
PDRIVE_PINGROUP_UAB,
PDRIVE_PINGROUP_UART2,
PDRIVE_PINGROUP_UART3,
- PDRIVE_PINGROUP_VI1 = 24, /* offset 0x8c8 */
- PDRIVE_PINGROUP_SDIO1 = 33, /* offset 0x8ec */
- PDRIVE_PINGROUP_CRT = 36, /* offset 0x8f8 */
- PDRIVE_PINGROUP_DDC,
+ PDRIVE_PINGROUP_SDIO1 = 33, /* offset 0x8EC */
+ PDRIVE_PINGROUP_DDC = 37, /* offset 0x8FC */
PDRIVE_PINGROUP_GMA,
- PDRIVE_PINGROUP_GMB,
- PDRIVE_PINGROUP_GMC,
- PDRIVE_PINGROUP_GMD,
- PDRIVE_PINGROUP_GME,
+ PDRIVE_PINGROUP_GME = 42, /* offset 0x910 */
PDRIVE_PINGROUP_GMF,
PDRIVE_PINGROUP_GMG,
PDRIVE_PINGROUP_GMH,
PDRIVE_PINGROUP_OWR,
PDRIVE_PINGROUP_UAD,
- PDRIVE_PINGROUP_GPV,
PDRIVE_PINGROUP_DEV3 = 49, /* offset 0x92c */
PDRIVE_PINGROUP_CEC = 52, /* offset 0x938 */
- PDRIVE_PINGROUP_AT6,
+ PDRIVE_PINGROUP_AT6 = 75, /* offset 0x994 */
PDRIVE_PINGROUP_DAP5,
PDRIVE_PINGROUP_VBUS,
+ PDRIVE_PINGROUP_AO3,
+ PDRIVE_PINGROUP_HVC,
+ PDRIVE_PINGROUP_SDIO4,
+ PDRIVE_PINGROUP_AO0,
PDRIVE_PINGROUP_COUNT,
};
@@ -401,6 +312,7 @@ enum pmux_func {
PMUX_FUNC_VI,
PMUX_FUNC_VI_SENSOR_CLK,
PMUX_FUNC_XIO,
+ /* End of Tegra2 MUX selectors */
PMUX_FUNC_BLINK,
PMUX_FUNC_CEC,
PMUX_FUNC_CLK12,
@@ -444,7 +356,7 @@ enum pmux_func {
PMUX_FUNC_VGP4,
PMUX_FUNC_VGP5,
PMUX_FUNC_VGP6,
-
+ /* End of Tegra3 MUX selectors */
PMUX_FUNC_USB,
PMUX_FUNC_SOC,
PMUX_FUNC_CPU,
@@ -453,10 +365,12 @@ enum pmux_func {
PMUX_FUNC_PMI,
PMUX_FUNC_CLDVFS,
PMUX_FUNC_RESET_OUT_N,
+ /* End of Tegra114 MUX selectors */
PMUX_FUNC_SAFE,
PMUX_FUNC_MAX,
+ PMUX_FUNC_INVALID = 0x4000,
PMUX_FUNC_RSVD1 = 0x8000,
PMUX_FUNC_RSVD2 = 0x8001,
PMUX_FUNC_RSVD3 = 0x8002,
@@ -492,6 +406,7 @@ enum pmux_tristate {
enum pmux_pin_io {
PMUX_PIN_OUTPUT = 0,
PMUX_PIN_INPUT = 1,
+ PMUX_PIN_NONE,
};
/* return 1 if a pin_io_is in range */
#define pmux_pin_io_isvalid(io) (((io) >= PMUX_PIN_OUTPUT) && \
@@ -525,6 +440,16 @@ enum pmux_pin_ioreset {
(((ioreset) >= PMUX_PIN_IO_RESET_DEFAULT) && \
((ioreset) <= PMUX_PIN_IO_RESET_ENABLE))
+enum pmux_pin_rcv_sel {
+ PMUX_PIN_RCV_SEL_DEFAULT = 0,
+ PMUX_PIN_RCV_SEL_NORMAL,
+ PMUX_PIN_RCV_SEL_HIGH,
+};
+/* return 1 if a pin_rcv_sel_is in range */
+#define pmux_pin_rcv_sel_isvalid(rcv_sel) \
+ (((rcv_sel) >= PMUX_PIN_RCV_SEL_DEFAULT) && \
+ ((rcv_sel) <= PMUX_PIN_RCV_SEL_HIGH))
+
/* Available power domains used by pin groups */
enum pmux_vddio {
PMUX_VDDIO_BB = 0,
@@ -546,10 +471,73 @@ enum pmux_vddio {
PMUX_VDDIO_NONE
};
-/* T114 pin drive group and pin mux registers */
-#define PDRIVE_PINGROUP_OFFSET (0x868 >> 2)
-#define PMUX_OFFSET ((0x3000 >> 2) - PDRIVE_PINGROUP_OFFSET - \
- PDRIVE_PINGROUP_COUNT)
+#define PGRP_SLWF_NONE -1
+#define PGRP_SLWF_MAX 3
+#define PGRP_SLWR_NONE PGRP_SLWF_NONE
+#define PGRP_SLWR_MAX PGRP_SLWF_MAX
+
+#define PGRP_DRVUP_NONE -1
+#define PGRP_DRVUP_MAX 127
+#define PGRP_DRVDN_NONE PGRP_DRVUP_NONE
+#define PGRP_DRVDN_MAX PGRP_DRVUP_MAX
+
+#define PGRP_SCHMT_NONE -1
+#define PGRP_HSM_NONE PGRP_SCHMT_NONE
+
+/* return 1 if a padgrp is in range */
+#define pmux_padgrp_isvalid(pd) (((pd) >= 0) && ((pd) < PDRIVE_PINGROUP_COUNT))
+
+/* return 1 if a slew-rate rising/falling edge value is in range */
+#define pmux_pad_slw_isvalid(slw) (((slw) == PGRP_SLWF_NONE) || \
+ (((slw) >= 0) && ((slw) <= PGRP_SLWF_MAX)))
+
+/* return 1 if a driver output pull-up/down strength code value is in range */
+#define pmux_pad_drv_isvalid(drv) (((drv) == PGRP_DRVUP_NONE) || \
+ (((drv) >= 0) && ((drv) <= PGRP_DRVUP_MAX)))
+
+/* return 1 if a low-power mode value is in range */
+#define pmux_pad_lpmd_isvalid(lpm) (((lpm) == PGRP_LPMD_NONE) || \
+ (((lpm) >= 0) && ((lpm) <= PGRP_LPMD_X)))
+
+/* Defines a pin group cfg's low-power mode select */
+enum pgrp_lpmd {
+ PGRP_LPMD_X8 = 0,
+ PGRP_LPMD_X4,
+ PGRP_LPMD_X2,
+ PGRP_LPMD_X,
+ PGRP_LPMD_NONE = -1,
+};
+
+/* Defines whether a pin group cfg's schmidt is enabled or not */
+enum pgrp_schmt {
+ PGRP_SCHMT_DISABLE = 0,
+ PGRP_SCHMT_ENABLE = 1,
+};
+
+/* Defines whether a pin group cfg's high-speed mode is enabled or not */
+enum pgrp_hsm {
+ PGRP_HSM_DISABLE = 0,
+ PGRP_HSM_ENABLE = 1,
+};
+
+/*
+ * This defines the configuration for a pin group's pad control config
+ */
+struct padctrl_config {
+ enum pdrive_pingrp padgrp; /* pin group PDRIVE_PINGRP_x */
+ int slwf; /* falling edge slew */
+ int slwr; /* rising edge slew */
+ int drvup; /* pull-up drive strength */
+ int drvdn; /* pull-down drive strength */
+ enum pgrp_lpmd lpmd; /* low-power mode selection */
+ enum pgrp_schmt schmt; /* schmidt enable */
+ enum pgrp_hsm hsm; /* high-speed mode enable */
+};
+
+/* t114 pin drive group and pin mux registers */
+#define PDRIVE_PINGROUP_OFFSET (0x868 >> 2)
+#define PMUX_OFFSET ((0x3000 >> 2) - PDRIVE_PINGROUP_OFFSET - \
+ PDRIVE_PINGROUP_COUNT)
struct pmux_tri_ctlr {
uint pmt_reserved0; /* ABP_MISC_PP_ reserved offset 00 */
uint pmt_reserved1; /* ABP_MISC_PP_ reserved offset 04 */
@@ -581,6 +569,8 @@ struct pingroup_config {
enum pmux_pin_lock lock; /* lock enable/disable PMUX_PIN... */
enum pmux_pin_od od; /* open-drain or push-pull driver */
enum pmux_pin_ioreset ioreset; /* input/output reset PMUX_PIN... */
+ enum pmux_pin_rcv_sel rcv_sel; /* select between High and Normal */
+ /* VIL/VIH receivers */
};
/* Set a pin group to tristate */
@@ -615,4 +605,12 @@ void pinmux_config_table(struct pingroup_config *config, int len);
/* Set a group of pins from a table */
void pinmux_init(void);
-#endif /* _TEGRA114_PINMUX_H_ */
+/**
+ * Set the GP pad configs
+ *
+ * @param config List of config items
+ * @param len Number of config items in list
+ */
+void padgrp_config_table(struct padctrl_config *config, int len);
+
+#endif /* _TEGRA114_PINMUX_H_ */
diff --git a/arch/arm/include/asm/arch-tegra20/tegra.h b/arch/arm/include/asm/arch-tegra20/tegra.h
index e1de044..ad5c01d 100644
--- a/arch/arm/include/asm/arch-tegra20/tegra.h
+++ b/arch/arm/include/asm/arch-tegra20/tegra.h
@@ -29,7 +29,6 @@
#include <asm/arch-tegra/tegra.h>
#define TEGRA_USB1_BASE 0xC5000000
-#define TEGRA_USB3_BASE 0xC5008000
#define BCT_ODMDATA_OFFSET 4068 /* 12 bytes from end of BCT */
diff --git a/arch/arm/include/asm/arch-tegra30/gp_padctrl.h b/arch/arm/include/asm/arch-tegra30/gp_padctrl.h
index 9b383d0..23d184f 100644
--- a/arch/arm/include/asm/arch-tegra30/gp_padctrl.h
+++ b/arch/arm/include/asm/arch-tegra30/gp_padctrl.h
@@ -56,4 +56,10 @@ struct apb_misc_gp_ctlr {
u32 sdio1cfg; /* 0xEC: APB_MISC_GP_SDIO1CFGPADCTRL */
};
+/* SDMMC1/3 settings from section 24.6 of T30 TRM */
+#define SDIOCFG_DRVUP_SLWF 1
+#define SDIOCFG_DRVDN_SLWR 1
+#define SDIOCFG_DRVUP 0x2E
+#define SDIOCFG_DRVDN 0x2A
+
#endif /* _TEGRA30_GP_PADCTRL_H_ */
diff --git a/arch/arm/include/asm/arch-tegra30/pinmux.h b/arch/arm/include/asm/arch-tegra30/pinmux.h
index 341951b..a9e1b46 100644
--- a/arch/arm/include/asm/arch-tegra30/pinmux.h
+++ b/arch/arm/include/asm/arch-tegra30/pinmux.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@@ -531,6 +531,63 @@ enum pmux_vddio {
PMUX_VDDIO_NONE
};
+#define PGRP_SLWF_NONE -1
+#define PGRP_SLWF_MAX 3
+#define PGRP_SLWR_NONE PGRP_SLWF_NONE
+#define PGRP_SLWR_MAX PGRP_SLWF_MAX
+
+#define PGRP_DRVUP_NONE -1
+#define PGRP_DRVUP_MAX 127
+#define PGRP_DRVDN_NONE PGRP_DRVUP_NONE
+#define PGRP_DRVDN_MAX PGRP_DRVUP_MAX
+
+/* return 1 if a padgrp is in range */
+#define pmux_padgrp_isvalid(pd) (((pd) >= 0) && ((pd) < PDRIVE_PINGROUP_COUNT))
+
+/* return 1 if a slew-rate rising/falling edge value is in range */
+#define pmux_pad_slw_isvalid(slw) (((slw) >= 0) && ((slw) <= PGRP_SLWF_MAX))
+
+/* return 1 if a driver output pull-up/down strength code value is in range */
+#define pmux_pad_drv_isvalid(drv) (((drv) >= 0) && ((drv) <= PGRP_DRVUP_MAX))
+
+/* return 1 if a low-power mode value is in range */
+#define pmux_pad_lpmd_isvalid(lpm) (((lpm) >= 0) && ((lpm) <= PGRP_LPMD_X))
+
+/* Defines a pin group cfg's low-power mode select */
+enum pgrp_lpmd {
+ PGRP_LPMD_X8 = 0,
+ PGRP_LPMD_X4,
+ PGRP_LPMD_X2,
+ PGRP_LPMD_X,
+ PGRP_LPMD_NONE = -1,
+};
+
+/* Defines whether a pin group cfg's schmidt is enabled or not */
+enum pgrp_schmt {
+ PGRP_SCHMT_DISABLE = 0,
+ PGRP_SCHMT_ENABLE = 1,
+};
+
+/* Defines whether a pin group cfg's high-speed mode is enabled or not */
+enum pgrp_hsm {
+ PGRP_HSM_DISABLE = 0,
+ PGRP_HSM_ENABLE = 1,
+};
+
+/*
+ * This defines the configuration for a pin group's pad control config
+ */
+struct padctrl_config {
+ enum pdrive_pingrp padgrp; /* pin group PDRIVE_PINGRP_x */
+ int slwf; /* falling edge slew */
+ int slwr; /* rising edge slew */
+ int drvup; /* pull-up drive strength */
+ int drvdn; /* pull-down drive strength */
+ enum pgrp_lpmd lpmd; /* low-power mode selection */
+ enum pgrp_schmt schmt; /* schmidt enable */
+ enum pgrp_hsm hsm; /* high-speed mode enable */
+};
+
/* t30 pin drive group and pin mux registers */
#define PDRIVE_PINGROUP_OFFSET (0x868 >> 2)
#define PMUX_OFFSET ((0x3000 >> 2) - PDRIVE_PINGROUP_OFFSET - \
@@ -600,4 +657,12 @@ void pinmux_config_table(struct pingroup_config *config, int len);
/* Set a group of pins from a table */
void pinmux_init(void);
+/**
+ * Set the GP pad configs
+ *
+ * @param config List of config items
+ * @param len Number of config items in list
+ */
+void padgrp_config_table(struct padctrl_config *config, int len);
+
#endif /* _TEGRA30_PINMUX_H_ */
diff --git a/arch/arm/include/asm/arch-tegra30/tegra.h b/arch/arm/include/asm/arch-tegra30/tegra.h
index decf564..c02c5d8 100644
--- a/arch/arm/include/asm/arch-tegra30/tegra.h
+++ b/arch/arm/include/asm/arch-tegra30/tegra.h
@@ -21,6 +21,8 @@
#include <asm/arch-tegra/tegra.h>
+#define TEGRA_USB1_BASE 0x7D000000
+
#define BCT_ODMDATA_OFFSET 6116 /* 12 bytes from end of BCT */
#define MAX_NUM_CPU 4
diff --git a/arch/arm/include/asm/arch-zynq/hardware.h b/arch/arm/include/asm/arch-zynq/hardware.h
new file mode 100644
index 0000000..d0c69da
--- /dev/null
+++ b/arch/arm/include/asm/arch-zynq/hardware.h
@@ -0,0 +1,85 @@
+/*
+ * Copyright (c) 2013 Xilinx Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_ARCH_HARDWARE_H
+#define _ASM_ARCH_HARDWARE_H
+
+#define XPSS_SYS_CTRL_BASEADDR 0xF8000000
+#define XPSS_DEV_CFG_APB_BASEADDR 0xF8007000
+#define XPSS_SCU_BASEADDR 0xF8F00000
+
+/* Reflect slcr offsets */
+struct slcr_regs {
+ u32 scl; /* 0x0 */
+ u32 slcr_lock; /* 0x4 */
+ u32 slcr_unlock; /* 0x8 */
+ u32 reserved1[125];
+ u32 pss_rst_ctrl; /* 0x200 */
+ u32 reserved2[15];
+ u32 fpga_rst_ctrl; /* 0x240 */
+ u32 reserved3[5];
+ u32 reboot_status; /* 0x258 */
+ u32 boot_mode; /* 0x25c */
+ u32 reserved4[116];
+ u32 trust_zone; /* 0x430 */ /* FIXME */
+ u32 reserved5[115];
+ u32 ddr_urgent; /* 0x600 */
+ u32 reserved6[6];
+ u32 ddr_urgent_sel; /* 0x61c */
+ u32 reserved7[188];
+ u32 ocm_cfg; /* 0x910 */
+};
+
+#define slcr_base ((struct slcr_regs *) XPSS_SYS_CTRL_BASEADDR)
+
+struct devcfg_regs {
+ u32 ctrl; /* 0x0 */
+ u32 lock; /* 0x4 */
+ u32 cfg; /* 0x8 */
+ u32 int_sts; /* 0xc */
+ u32 int_mask; /* 0x10 */
+ u32 status; /* 0x14 */
+ u32 dma_src_addr; /* 0x18 */
+ u32 dma_dst_addr; /* 0x1c */
+ u32 dma_src_len; /* 0x20 */
+ u32 dma_dst_len; /* 0x24 */
+ u32 rom_shadow; /* 0x28 */
+ u32 reserved1[2];
+ u32 unlock; /* 0x34 */
+ u32 reserved2[18];
+ u32 mctrl; /* 0x80 */
+ u32 reserved3;
+ u32 write_count; /* 0x88 */
+ u32 read_count; /* 0x8c */
+};
+
+#define devcfg_base ((struct devcfg_regs *) XPSS_DEV_CFG_APB_BASEADDR)
+
+struct scu_regs {
+ u32 reserved1[16];
+ u32 filter_start; /* 0x40 */
+ u32 filter_end; /* 0x44 */
+};
+
+#define scu_base ((struct scu_regs *) XPSS_SCU_BASEADDR)
+
+#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/cpu/armv7/mx6/lowlevel_init.S b/arch/arm/include/asm/arch-zynq/sys_proto.h
index 7b60ca7..e788900 100644
--- a/arch/arm/cpu/armv7/mx6/lowlevel_init.S
+++ b/arch/arm/include/asm/arch-zynq/sys_proto.h
@@ -1,5 +1,8 @@
/*
- * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ * Copyright (c) 2013 Xilinx Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -8,7 +11,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -16,20 +19,12 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
-.section ".text.init", "x"
-#include <linux/linkage.h>
+#ifndef _SYS_PROTO_H_
+#define _SYS_PROTO_H_
-.macro init_arm_errata
- /* ARM erratum ID #743622 */
- mrc p15, 0, r10, c15, c0, 1 /* read diagnostic register */
- orr r10, r10, #1 << 6 /* set bit #6 */
- /* ARM erratum ID #751472 */
- orr r10, r10, #1 << 11 /* set bit #11 */
- mcr p15, 0, r10, c15, c0, 1 /* write diagnostic register */
-.endm
+extern void zynq_slcr_lock(void);
+extern void zynq_slcr_unlock(void);
+extern void zynq_slcr_cpu_reset(void);
-ENTRY(lowlevel_init)
- init_arm_errata
- mov pc, lr
-ENDPROC(lowlevel_init)
+#endif /* _SYS_PROTO_H_ */
diff --git a/arch/arm/include/asm/armv7.h b/arch/arm/include/asm/armv7.h
index ad9a875..a73630b 100644
--- a/arch/arm/include/asm/armv7.h
+++ b/arch/arm/include/asm/armv7.h
@@ -33,6 +33,7 @@
/* Cortex-A15 revisions */
#define MIDR_CORTEX_A15_R0P0 0x410FC0F0
+#define MIDR_CORTEX_A15_R2P2 0x412FC0F2
/* CCSIDR */
#define CCSIDR_LINE_SIZE_OFFSET 0
diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h
index ed251ec..c5d1e6c 100644
--- a/arch/arm/include/asm/emif.h
+++ b/arch/arm/include/asm/emif.h
@@ -519,6 +519,7 @@
#define SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES 0x0000C1A7
#define SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES 0x000001A7
+#define SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES_ES2 0x0000C1C7
/* DMM */
#define DMM_BASE 0x4E000040
@@ -696,11 +697,9 @@ struct dmm_lisa_map_regs {
u32 dmm_lisa_map_1;
u32 dmm_lisa_map_2;
u32 dmm_lisa_map_3;
+ u8 is_ma_present;
};
-extern const u32 ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG];
-extern const u32 ddr3_ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG];
-
#define CS0 0
#define CS1 1
/* The maximum frequency at which the LPDDR2 interface can operate in Hz*/
@@ -1027,6 +1026,11 @@ extern const u32 ddr3_ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG];
#define MR8_IO_WIDTH_SHIFT 0x6
#define MR8_IO_WIDTH_MASK (0x3 << 0x6)
+/* SDRAM TYPE */
+#define EMIF_SDRAM_TYPE_DDR2 0x2
+#define EMIF_SDRAM_TYPE_DDR3 0x3
+#define EMIF_SDRAM_TYPE_LPDDR2 0x4
+
struct lpddr2_addressing {
u8 num_banks;
u8 t_REFI_us_x10;
@@ -1129,6 +1133,14 @@ struct emif_regs {
u32 emif_rd_wr_exec_thresh;
};
+struct lpddr2_mr_regs {
+ s8 mr1;
+ s8 mr2;
+ s8 mr3;
+ s8 mr10;
+ s8 mr16;
+};
+
/* assert macros */
#if defined(DEBUG)
#define emif_assert(c) ({ if (!(c)) for (;;); })
@@ -1148,6 +1160,7 @@ void emif_get_device_timings(u32 emif_nr,
#endif
void do_ext_phy_settings(u32 base, const struct emif_regs *regs);
+void get_lpddr2_mr_regs(const struct lpddr2_mr_regs **regs);
#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
extern u32 *const T_num;
@@ -1156,4 +1169,5 @@ extern u32 *const emif_sizes;
#endif
void config_data_eye_leveling_samples(u32 emif_base);
+u32 emif_sdram_type(void);
#endif
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 2a40b89..091ddb5 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -25,6 +25,524 @@
#ifndef _OMAP_COMMON_H_
#define _OMAP_COMMON_H_
+#include <common.h>
+
+#define NUM_SYS_CLKS 8
+
+struct prcm_regs {
+ /* cm1.ckgen */
+ u32 cm_clksel_core;
+ u32 cm_clksel_abe;
+ u32 cm_dll_ctrl;
+ u32 cm_clkmode_dpll_core;
+ u32 cm_idlest_dpll_core;
+ u32 cm_autoidle_dpll_core;
+ u32 cm_clksel_dpll_core;
+ u32 cm_div_m2_dpll_core;
+ u32 cm_div_m3_dpll_core;
+ u32 cm_div_h11_dpll_core;
+ u32 cm_div_h12_dpll_core;
+ u32 cm_div_h13_dpll_core;
+ u32 cm_div_h14_dpll_core;
+ u32 cm_div_h21_dpll_core;
+ u32 cm_div_h24_dpll_core;
+ u32 cm_ssc_deltamstep_dpll_core;
+ u32 cm_ssc_modfreqdiv_dpll_core;
+ u32 cm_emu_override_dpll_core;
+ u32 cm_div_h22_dpllcore;
+ u32 cm_div_h23_dpll_core;
+ u32 cm_clkmode_dpll_mpu;
+ u32 cm_idlest_dpll_mpu;
+ u32 cm_autoidle_dpll_mpu;
+ u32 cm_clksel_dpll_mpu;
+ u32 cm_div_m2_dpll_mpu;
+ u32 cm_ssc_deltamstep_dpll_mpu;
+ u32 cm_ssc_modfreqdiv_dpll_mpu;
+ u32 cm_bypclk_dpll_mpu;
+ u32 cm_clkmode_dpll_iva;
+ u32 cm_idlest_dpll_iva;
+ u32 cm_autoidle_dpll_iva;
+ u32 cm_clksel_dpll_iva;
+ u32 cm_div_h11_dpll_iva;
+ u32 cm_div_h12_dpll_iva;
+ u32 cm_ssc_deltamstep_dpll_iva;
+ u32 cm_ssc_modfreqdiv_dpll_iva;
+ u32 cm_bypclk_dpll_iva;
+ u32 cm_clkmode_dpll_abe;
+ u32 cm_idlest_dpll_abe;
+ u32 cm_autoidle_dpll_abe;
+ u32 cm_clksel_dpll_abe;
+ u32 cm_div_m2_dpll_abe;
+ u32 cm_div_m3_dpll_abe;
+ u32 cm_ssc_deltamstep_dpll_abe;
+ u32 cm_ssc_modfreqdiv_dpll_abe;
+ u32 cm_clkmode_dpll_ddrphy;
+ u32 cm_idlest_dpll_ddrphy;
+ u32 cm_autoidle_dpll_ddrphy;
+ u32 cm_clksel_dpll_ddrphy;
+ u32 cm_div_m2_dpll_ddrphy;
+ u32 cm_div_h11_dpll_ddrphy;
+ u32 cm_div_h12_dpll_ddrphy;
+ u32 cm_div_h13_dpll_ddrphy;
+ u32 cm_ssc_deltamstep_dpll_ddrphy;
+ u32 cm_clkmode_dpll_dsp;
+ u32 cm_shadow_freq_config1;
+ u32 cm_mpu_mpu_clkctrl;
+
+ /* cm1.dsp */
+ u32 cm_dsp_clkstctrl;
+ u32 cm_dsp_dsp_clkctrl;
+
+ /* cm1.abe */
+ u32 cm1_abe_clkstctrl;
+ u32 cm1_abe_l4abe_clkctrl;
+ u32 cm1_abe_aess_clkctrl;
+ u32 cm1_abe_pdm_clkctrl;
+ u32 cm1_abe_dmic_clkctrl;
+ u32 cm1_abe_mcasp_clkctrl;
+ u32 cm1_abe_mcbsp1_clkctrl;
+ u32 cm1_abe_mcbsp2_clkctrl;
+ u32 cm1_abe_mcbsp3_clkctrl;
+ u32 cm1_abe_slimbus_clkctrl;
+ u32 cm1_abe_timer5_clkctrl;
+ u32 cm1_abe_timer6_clkctrl;
+ u32 cm1_abe_timer7_clkctrl;
+ u32 cm1_abe_timer8_clkctrl;
+ u32 cm1_abe_wdt3_clkctrl;
+
+ /* cm2.ckgen */
+ u32 cm_clksel_mpu_m3_iss_root;
+ u32 cm_clksel_usb_60mhz;
+ u32 cm_scale_fclk;
+ u32 cm_core_dvfs_perf1;
+ u32 cm_core_dvfs_perf2;
+ u32 cm_core_dvfs_perf3;
+ u32 cm_core_dvfs_perf4;
+ u32 cm_core_dvfs_current;
+ u32 cm_iva_dvfs_perf_tesla;
+ u32 cm_iva_dvfs_perf_ivahd;
+ u32 cm_iva_dvfs_perf_abe;
+ u32 cm_iva_dvfs_current;
+ u32 cm_clkmode_dpll_per;
+ u32 cm_idlest_dpll_per;
+ u32 cm_autoidle_dpll_per;
+ u32 cm_clksel_dpll_per;
+ u32 cm_div_m2_dpll_per;
+ u32 cm_div_m3_dpll_per;
+ u32 cm_div_h11_dpll_per;
+ u32 cm_div_h12_dpll_per;
+ u32 cm_div_h13_dpll_per;
+ u32 cm_div_h14_dpll_per;
+ u32 cm_ssc_deltamstep_dpll_per;
+ u32 cm_ssc_modfreqdiv_dpll_per;
+ u32 cm_emu_override_dpll_per;
+ u32 cm_clkmode_dpll_usb;
+ u32 cm_idlest_dpll_usb;
+ u32 cm_autoidle_dpll_usb;
+ u32 cm_clksel_dpll_usb;
+ u32 cm_div_m2_dpll_usb;
+ u32 cm_ssc_deltamstep_dpll_usb;
+ u32 cm_ssc_modfreqdiv_dpll_usb;
+ u32 cm_clkdcoldo_dpll_usb;
+ u32 cm_clkmode_dpll_pcie_ref;
+ u32 cm_clkmode_apll_pcie;
+ u32 cm_idlest_apll_pcie;
+ u32 cm_div_m2_apll_pcie;
+ u32 cm_clkvcoldo_apll_pcie;
+ u32 cm_clkmode_dpll_unipro;
+ u32 cm_idlest_dpll_unipro;
+ u32 cm_autoidle_dpll_unipro;
+ u32 cm_clksel_dpll_unipro;
+ u32 cm_div_m2_dpll_unipro;
+ u32 cm_ssc_deltamstep_dpll_unipro;
+ u32 cm_ssc_modfreqdiv_dpll_unipro;
+
+ /* cm2.core */
+ u32 cm_coreaon_bandgap_clkctrl;
+ u32 cm_coreaon_io_srcomp_clkctrl;
+ u32 cm_l3_1_clkstctrl;
+ u32 cm_l3_1_dynamicdep;
+ u32 cm_l3_1_l3_1_clkctrl;
+ u32 cm_l3_2_clkstctrl;
+ u32 cm_l3_2_dynamicdep;
+ u32 cm_l3_2_l3_2_clkctrl;
+ u32 cm_l3_gpmc_clkctrl;
+ u32 cm_l3_2_ocmc_ram_clkctrl;
+ u32 cm_mpu_m3_clkstctrl;
+ u32 cm_mpu_m3_staticdep;
+ u32 cm_mpu_m3_dynamicdep;
+ u32 cm_mpu_m3_mpu_m3_clkctrl;
+ u32 cm_sdma_clkstctrl;
+ u32 cm_sdma_staticdep;
+ u32 cm_sdma_dynamicdep;
+ u32 cm_sdma_sdma_clkctrl;
+ u32 cm_memif_clkstctrl;
+ u32 cm_memif_dmm_clkctrl;
+ u32 cm_memif_emif_fw_clkctrl;
+ u32 cm_memif_emif_1_clkctrl;
+ u32 cm_memif_emif_2_clkctrl;
+ u32 cm_memif_dll_clkctrl;
+ u32 cm_memif_emif_h1_clkctrl;
+ u32 cm_memif_emif_h2_clkctrl;
+ u32 cm_memif_dll_h_clkctrl;
+ u32 cm_c2c_clkstctrl;
+ u32 cm_c2c_staticdep;
+ u32 cm_c2c_dynamicdep;
+ u32 cm_c2c_sad2d_clkctrl;
+ u32 cm_c2c_modem_icr_clkctrl;
+ u32 cm_c2c_sad2d_fw_clkctrl;
+ u32 cm_l4cfg_clkstctrl;
+ u32 cm_l4cfg_dynamicdep;
+ u32 cm_l4cfg_l4_cfg_clkctrl;
+ u32 cm_l4cfg_hw_sem_clkctrl;
+ u32 cm_l4cfg_mailbox_clkctrl;
+ u32 cm_l4cfg_sar_rom_clkctrl;
+ u32 cm_l3instr_clkstctrl;
+ u32 cm_l3instr_l3_3_clkctrl;
+ u32 cm_l3instr_l3_instr_clkctrl;
+ u32 cm_l3instr_intrconn_wp1_clkctrl;
+
+ /* cm2.ivahd */
+ u32 cm_ivahd_clkstctrl;
+ u32 cm_ivahd_ivahd_clkctrl;
+ u32 cm_ivahd_sl2_clkctrl;
+
+ /* cm2.cam */
+ u32 cm_cam_clkstctrl;
+ u32 cm_cam_iss_clkctrl;
+ u32 cm_cam_fdif_clkctrl;
+ u32 cm_cam_vip1_clkctrl;
+ u32 cm_cam_vip2_clkctrl;
+ u32 cm_cam_vip3_clkctrl;
+ u32 cm_cam_lvdsrx_clkctrl;
+ u32 cm_cam_csi1_clkctrl;
+ u32 cm_cam_csi2_clkctrl;
+
+ /* cm2.dss */
+ u32 cm_dss_clkstctrl;
+ u32 cm_dss_dss_clkctrl;
+
+ /* cm2.sgx */
+ u32 cm_sgx_clkstctrl;
+ u32 cm_sgx_sgx_clkctrl;
+
+ /* cm2.l3init */
+ u32 cm_l3init_clkstctrl;
+
+ /* cm2.l3init */
+ u32 cm_l3init_hsmmc1_clkctrl;
+ u32 cm_l3init_hsmmc2_clkctrl;
+ u32 cm_l3init_hsi_clkctrl;
+ u32 cm_l3init_hsusbhost_clkctrl;
+ u32 cm_l3init_hsusbotg_clkctrl;
+ u32 cm_l3init_hsusbtll_clkctrl;
+ u32 cm_l3init_p1500_clkctrl;
+ u32 cm_l3init_fsusb_clkctrl;
+ u32 cm_l3init_ocp2scp1_clkctrl;
+
+ /* cm2.l4per */
+ u32 cm_l4per_clkstctrl;
+ u32 cm_l4per_dynamicdep;
+ u32 cm_l4per_adc_clkctrl;
+ u32 cm_l4per_gptimer10_clkctrl;
+ u32 cm_l4per_gptimer11_clkctrl;
+ u32 cm_l4per_gptimer2_clkctrl;
+ u32 cm_l4per_gptimer3_clkctrl;
+ u32 cm_l4per_gptimer4_clkctrl;
+ u32 cm_l4per_gptimer9_clkctrl;
+ u32 cm_l4per_elm_clkctrl;
+ u32 cm_l4per_gpio2_clkctrl;
+ u32 cm_l4per_gpio3_clkctrl;
+ u32 cm_l4per_gpio4_clkctrl;
+ u32 cm_l4per_gpio5_clkctrl;
+ u32 cm_l4per_gpio6_clkctrl;
+ u32 cm_l4per_hdq1w_clkctrl;
+ u32 cm_l4per_hecc1_clkctrl;
+ u32 cm_l4per_hecc2_clkctrl;
+ u32 cm_l4per_i2c1_clkctrl;
+ u32 cm_l4per_i2c2_clkctrl;
+ u32 cm_l4per_i2c3_clkctrl;
+ u32 cm_l4per_i2c4_clkctrl;
+ u32 cm_l4per_l4per_clkctrl;
+ u32 cm_l4per_mcasp2_clkctrl;
+ u32 cm_l4per_mcasp3_clkctrl;
+ u32 cm_l4per_mgate_clkctrl;
+ u32 cm_l4per_mcspi1_clkctrl;
+ u32 cm_l4per_mcspi2_clkctrl;
+ u32 cm_l4per_mcspi3_clkctrl;
+ u32 cm_l4per_mcspi4_clkctrl;
+ u32 cm_l4per_gpio7_clkctrl;
+ u32 cm_l4per_gpio8_clkctrl;
+ u32 cm_l4per_mmcsd3_clkctrl;
+ u32 cm_l4per_mmcsd4_clkctrl;
+ u32 cm_l4per_msprohg_clkctrl;
+ u32 cm_l4per_slimbus2_clkctrl;
+ u32 cm_l4per_uart1_clkctrl;
+ u32 cm_l4per_uart2_clkctrl;
+ u32 cm_l4per_uart3_clkctrl;
+ u32 cm_l4per_uart4_clkctrl;
+ u32 cm_l4per_mmcsd5_clkctrl;
+ u32 cm_l4per_i2c5_clkctrl;
+ u32 cm_l4per_uart5_clkctrl;
+ u32 cm_l4per_uart6_clkctrl;
+ u32 cm_l4sec_clkstctrl;
+ u32 cm_l4sec_staticdep;
+ u32 cm_l4sec_dynamicdep;
+ u32 cm_l4sec_aes1_clkctrl;
+ u32 cm_l4sec_aes2_clkctrl;
+ u32 cm_l4sec_des3des_clkctrl;
+ u32 cm_l4sec_pkaeip29_clkctrl;
+ u32 cm_l4sec_rng_clkctrl;
+ u32 cm_l4sec_sha2md51_clkctrl;
+ u32 cm_l4sec_cryptodma_clkctrl;
+
+ /* l4 wkup regs */
+ u32 cm_abe_pll_ref_clksel;
+ u32 cm_sys_clksel;
+ u32 cm_wkup_clkstctrl;
+ u32 cm_wkup_l4wkup_clkctrl;
+ u32 cm_wkup_wdtimer1_clkctrl;
+ u32 cm_wkup_wdtimer2_clkctrl;
+ u32 cm_wkup_gpio1_clkctrl;
+ u32 cm_wkup_gptimer1_clkctrl;
+ u32 cm_wkup_gptimer12_clkctrl;
+ u32 cm_wkup_synctimer_clkctrl;
+ u32 cm_wkup_usim_clkctrl;
+ u32 cm_wkup_sarram_clkctrl;
+ u32 cm_wkup_keyboard_clkctrl;
+ u32 cm_wkup_rtc_clkctrl;
+ u32 cm_wkup_bandgap_clkctrl;
+ u32 cm_wkupaon_scrm_clkctrl;
+ u32 cm_wkupaon_io_srcomp_clkctrl;
+ u32 prm_rstctrl;
+ u32 prm_rstst;
+ u32 prm_vc_val_bypass;
+ u32 prm_vc_cfg_i2c_mode;
+ u32 prm_vc_cfg_i2c_clk;
+ u32 prm_sldo_core_setup;
+ u32 prm_sldo_core_ctrl;
+ u32 prm_sldo_mpu_setup;
+ u32 prm_sldo_mpu_ctrl;
+ u32 prm_sldo_mm_setup;
+ u32 prm_sldo_mm_ctrl;
+
+ u32 cm_div_m4_dpll_core;
+ u32 cm_div_m5_dpll_core;
+ u32 cm_div_m6_dpll_core;
+ u32 cm_div_m7_dpll_core;
+ u32 cm_div_m4_dpll_iva;
+ u32 cm_div_m5_dpll_iva;
+ u32 cm_div_m4_dpll_ddrphy;
+ u32 cm_div_m5_dpll_ddrphy;
+ u32 cm_div_m6_dpll_ddrphy;
+ u32 cm_div_m4_dpll_per;
+ u32 cm_div_m5_dpll_per;
+ u32 cm_div_m6_dpll_per;
+ u32 cm_div_m7_dpll_per;
+ u32 cm_l3instr_intrconn_wp1_clkct;
+ u32 cm_l3init_usbphy_clkctrl;
+ u32 cm_l4per_mcbsp4_clkctrl;
+ u32 prm_vc_cfg_channel;
+};
+
+struct omap_sys_ctrl_regs {
+ u32 control_status;
+ u32 control_core_mmr_lock1;
+ u32 control_core_mmr_lock2;
+ u32 control_core_mmr_lock3;
+ u32 control_core_mmr_lock4;
+ u32 control_core_mmr_lock5;
+ u32 control_core_control_io1;
+ u32 control_core_control_io2;
+ u32 control_id_code;
+ u32 control_std_fuse_opp_bgap;
+ u32 control_ldosram_iva_voltage_ctrl;
+ u32 control_ldosram_mpu_voltage_ctrl;
+ u32 control_ldosram_core_voltage_ctrl;
+ u32 control_padconf_core_base;
+ u32 control_paconf_global;
+ u32 control_paconf_mode;
+ u32 control_smart1io_padconf_0;
+ u32 control_smart1io_padconf_1;
+ u32 control_smart1io_padconf_2;
+ u32 control_smart2io_padconf_0;
+ u32 control_smart2io_padconf_1;
+ u32 control_smart2io_padconf_2;
+ u32 control_smart3io_padconf_0;
+ u32 control_smart3io_padconf_1;
+ u32 control_pbias;
+ u32 control_i2c_0;
+ u32 control_camera_rx;
+ u32 control_hdmi_tx_phy;
+ u32 control_uniportm;
+ u32 control_dsiphy;
+ u32 control_mcbsplp;
+ u32 control_usb2phycore;
+ u32 control_hdmi_1;
+ u32 control_hsi;
+ u32 control_ddr3ch1_0;
+ u32 control_ddr3ch2_0;
+ u32 control_ddrch1_0;
+ u32 control_ddrch1_1;
+ u32 control_ddrch2_0;
+ u32 control_ddrch2_1;
+ u32 control_lpddr2ch1_0;
+ u32 control_lpddr2ch1_1;
+ u32 control_ddrio_0;
+ u32 control_ddrio_1;
+ u32 control_ddrio_2;
+ u32 control_lpddr2io1_0;
+ u32 control_lpddr2io1_1;
+ u32 control_lpddr2io1_2;
+ u32 control_lpddr2io1_3;
+ u32 control_lpddr2io2_0;
+ u32 control_lpddr2io2_1;
+ u32 control_lpddr2io2_2;
+ u32 control_lpddr2io2_3;
+ u32 control_hyst_1;
+ u32 control_usbb_hsic_control;
+ u32 control_c2c;
+ u32 control_core_control_spare_rw;
+ u32 control_core_control_spare_r;
+ u32 control_core_control_spare_r_c0;
+ u32 control_srcomp_north_side;
+ u32 control_srcomp_south_side;
+ u32 control_srcomp_east_side;
+ u32 control_srcomp_west_side;
+ u32 control_srcomp_code_latch;
+ u32 control_pbiaslite;
+ u32 control_port_emif1_sdram_config;
+ u32 control_port_emif1_lpddr2_nvm_config;
+ u32 control_port_emif2_sdram_config;
+ u32 control_emif1_sdram_config_ext;
+ u32 control_emif2_sdram_config_ext;
+ u32 control_smart1nopmio_padconf_0;
+ u32 control_smart1nopmio_padconf_1;
+ u32 control_padconf_mode;
+ u32 control_xtal_oscillator;
+ u32 control_i2c_2;
+ u32 control_ckobuffer;
+ u32 control_wkup_control_spare_rw;
+ u32 control_wkup_control_spare_r;
+ u32 control_wkup_control_spare_r_c0;
+ u32 control_srcomp_east_side_wkup;
+ u32 control_efuse_1;
+ u32 control_efuse_2;
+ u32 control_efuse_3;
+ u32 control_efuse_4;
+ u32 control_efuse_5;
+ u32 control_efuse_6;
+ u32 control_efuse_7;
+ u32 control_efuse_8;
+ u32 control_efuse_9;
+ u32 control_efuse_10;
+ u32 control_efuse_11;
+ u32 control_efuse_12;
+ u32 control_efuse_13;
+ u32 control_padconf_wkup_base;
+};
+
+struct dpll_params {
+ u32 m;
+ u32 n;
+ s8 m2;
+ s8 m3;
+ s8 m4_h11;
+ s8 m5_h12;
+ s8 m6_h13;
+ s8 m7_h14;
+ s8 h21;
+ s8 h22;
+ s8 h23;
+ s8 h24;
+};
+
+struct dpll_regs {
+ u32 cm_clkmode_dpll;
+ u32 cm_idlest_dpll;
+ u32 cm_autoidle_dpll;
+ u32 cm_clksel_dpll;
+ u32 cm_div_m2_dpll;
+ u32 cm_div_m3_dpll;
+ u32 cm_div_m4_h11_dpll;
+ u32 cm_div_m5_h12_dpll;
+ u32 cm_div_m6_h13_dpll;
+ u32 cm_div_m7_h14_dpll;
+ u32 reserved[2];
+ u32 cm_div_h21_dpll;
+ u32 cm_div_h22_dpll;
+ u32 cm_div_h23_dpll;
+ u32 cm_div_h24_dpll;
+};
+
+struct dplls {
+ const struct dpll_params *mpu;
+ const struct dpll_params *core;
+ const struct dpll_params *per;
+ const struct dpll_params *abe;
+ const struct dpll_params *iva;
+ const struct dpll_params *usb;
+ const struct dpll_params *ddr;
+};
+
+struct pmic_data {
+ u32 base_offset;
+ u32 step;
+ u32 start_code;
+ unsigned gpio;
+ int gpio_en;
+};
+
+struct volts {
+ u32 value;
+ u32 addr;
+ struct pmic_data *pmic;
+};
+
+struct vcores_data {
+ struct volts mpu;
+ struct volts core;
+ struct volts mm;
+};
+
+extern struct prcm_regs const **prcm;
+extern struct prcm_regs const omap5_es1_prcm;
+extern struct prcm_regs const omap5_es2_prcm;
+extern struct prcm_regs const omap4_prcm;
+extern struct prcm_regs const dra7xx_prcm;
+extern struct dplls const **dplls_data;
+extern struct vcores_data const **omap_vcores;
+extern const u32 sys_clk_array[8];
+extern struct omap_sys_ctrl_regs const **ctrl;
+extern struct omap_sys_ctrl_regs const omap4_ctrl;
+extern struct omap_sys_ctrl_regs const omap5_ctrl;
+extern struct omap_sys_ctrl_regs const dra7xx_ctrl;
+
+void hw_data_init(void);
+
+const struct dpll_params *get_mpu_dpll_params(struct dplls const *);
+const struct dpll_params *get_core_dpll_params(struct dplls const *);
+const struct dpll_params *get_per_dpll_params(struct dplls const *);
+const struct dpll_params *get_iva_dpll_params(struct dplls const *);
+const struct dpll_params *get_usb_dpll_params(struct dplls const *);
+const struct dpll_params *get_abe_dpll_params(struct dplls const *);
+
+void do_enable_clocks(u32 const *clk_domains,
+ u32 const *clk_modules_hw_auto,
+ u32 const *clk_modules_explicit_en,
+ u8 wait_for_enable);
+
+void setup_post_dividers(u32 const base,
+ const struct dpll_params *params);
+u32 omap_ddr_clk(void);
+u32 get_sys_clk_index(void);
+void enable_basic_clocks(void);
+void enable_basic_uboot_clocks(void);
+void enable_non_essential_clocks(void);
+void scale_vcores(struct vcores_data const *);
+u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic);
+void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic);
+
/* Max value for DPLL multiplier M */
#define OMAP_DPLL_MAX_N 127
@@ -60,4 +578,9 @@ static inline u32 omap_revision(void)
#define OMAP5430_SILICON_ID_INVALID 0
#define OMAP5430_ES1_0 0x54300100
#define OMAP5432_ES1_0 0x54320100
+#define OMAP5430_ES2_0 0x54300200
+#define OMAP5432_ES2_0 0x54320200
+
+/* DRA7XX */
+#define DRA752_ES1_0 0x07520100
#endif /* _OMAP_COMMON_H_ */
diff --git a/arch/arm/include/asm/omap_mmc.h b/arch/arm/include/asm/omap_mmc.h
new file mode 100644
index 0000000..617e22f
--- /dev/null
+++ b/arch/arm/include/asm/omap_mmc.h
@@ -0,0 +1,168 @@
+/*
+ * (C) Copyright 2008
+ * Texas Instruments, <www.ti.com>
+ * Syed Mohammed Khasim <khasim@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation's version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef OMAP_MMC_H_
+#define OMAP_MMC_H_
+
+struct hsmmc {
+ unsigned char res1[0x10];
+ unsigned int sysconfig; /* 0x10 */
+ unsigned int sysstatus; /* 0x14 */
+ unsigned char res2[0x14];
+ unsigned int con; /* 0x2C */
+ unsigned char res3[0xD4];
+ unsigned int blk; /* 0x104 */
+ unsigned int arg; /* 0x108 */
+ unsigned int cmd; /* 0x10C */
+ unsigned int rsp10; /* 0x110 */
+ unsigned int rsp32; /* 0x114 */
+ unsigned int rsp54; /* 0x118 */
+ unsigned int rsp76; /* 0x11C */
+ unsigned int data; /* 0x120 */
+ unsigned int pstate; /* 0x124 */
+ unsigned int hctl; /* 0x128 */
+ unsigned int sysctl; /* 0x12C */
+ unsigned int stat; /* 0x130 */
+ unsigned int ie; /* 0x134 */
+ unsigned char res4[0x8];
+ unsigned int capa; /* 0x140 */
+};
+
+/*
+ * OMAP HS MMC Bit definitions
+ */
+#define MMC_SOFTRESET (0x1 << 1)
+#define RESETDONE (0x1 << 0)
+#define NOOPENDRAIN (0x0 << 0)
+#define OPENDRAIN (0x1 << 0)
+#define OD (0x1 << 0)
+#define INIT_NOINIT (0x0 << 1)
+#define INIT_INITSTREAM (0x1 << 1)
+#define HR_NOHOSTRESP (0x0 << 2)
+#define STR_BLOCK (0x0 << 3)
+#define MODE_FUNC (0x0 << 4)
+#define DW8_1_4BITMODE (0x0 << 5)
+#define MIT_CTO (0x0 << 6)
+#define CDP_ACTIVEHIGH (0x0 << 7)
+#define WPP_ACTIVEHIGH (0x0 << 8)
+#define RESERVED_MASK (0x3 << 9)
+#define CTPL_MMC_SD (0x0 << 11)
+#define BLEN_512BYTESLEN (0x200 << 0)
+#define NBLK_STPCNT (0x0 << 16)
+#define DE_DISABLE (0x0 << 0)
+#define BCE_DISABLE (0x0 << 1)
+#define BCE_ENABLE (0x1 << 1)
+#define ACEN_DISABLE (0x0 << 2)
+#define DDIR_OFFSET (4)
+#define DDIR_MASK (0x1 << 4)
+#define DDIR_WRITE (0x0 << 4)
+#define DDIR_READ (0x1 << 4)
+#define MSBS_SGLEBLK (0x0 << 5)
+#define MSBS_MULTIBLK (0x1 << 5)
+#define RSP_TYPE_OFFSET (16)
+#define RSP_TYPE_MASK (0x3 << 16)
+#define RSP_TYPE_NORSP (0x0 << 16)
+#define RSP_TYPE_LGHT136 (0x1 << 16)
+#define RSP_TYPE_LGHT48 (0x2 << 16)
+#define RSP_TYPE_LGHT48B (0x3 << 16)
+#define CCCE_NOCHECK (0x0 << 19)
+#define CCCE_CHECK (0x1 << 19)
+#define CICE_NOCHECK (0x0 << 20)
+#define CICE_CHECK (0x1 << 20)
+#define DP_OFFSET (21)
+#define DP_MASK (0x1 << 21)
+#define DP_NO_DATA (0x0 << 21)
+#define DP_DATA (0x1 << 21)
+#define CMD_TYPE_NORMAL (0x0 << 22)
+#define INDEX_OFFSET (24)
+#define INDEX_MASK (0x3f << 24)
+#define INDEX(i) (i << 24)
+#define DATI_MASK (0x1 << 1)
+#define CMDI_MASK (0x1 << 0)
+#define DTW_1_BITMODE (0x0 << 1)
+#define DTW_4_BITMODE (0x1 << 1)
+#define DTW_8_BITMODE (0x1 << 5) /* CON[DW8]*/
+#define SDBP_PWROFF (0x0 << 8)
+#define SDBP_PWRON (0x1 << 8)
+#define SDVS_1V8 (0x5 << 9)
+#define SDVS_3V0 (0x6 << 9)
+#define ICE_MASK (0x1 << 0)
+#define ICE_STOP (0x0 << 0)
+#define ICS_MASK (0x1 << 1)
+#define ICS_NOTREADY (0x0 << 1)
+#define ICE_OSCILLATE (0x1 << 0)
+#define CEN_MASK (0x1 << 2)
+#define CEN_DISABLE (0x0 << 2)
+#define CEN_ENABLE (0x1 << 2)
+#define CLKD_OFFSET (6)
+#define CLKD_MASK (0x3FF << 6)
+#define DTO_MASK (0xF << 16)
+#define DTO_15THDTO (0xE << 16)
+#define SOFTRESETALL (0x1 << 24)
+#define CC_MASK (0x1 << 0)
+#define TC_MASK (0x1 << 1)
+#define BWR_MASK (0x1 << 4)
+#define BRR_MASK (0x1 << 5)
+#define ERRI_MASK (0x1 << 15)
+#define IE_CC (0x01 << 0)
+#define IE_TC (0x01 << 1)
+#define IE_BWR (0x01 << 4)
+#define IE_BRR (0x01 << 5)
+#define IE_CTO (0x01 << 16)
+#define IE_CCRC (0x01 << 17)
+#define IE_CEB (0x01 << 18)
+#define IE_CIE (0x01 << 19)
+#define IE_DTO (0x01 << 20)
+#define IE_DCRC (0x01 << 21)
+#define IE_DEB (0x01 << 22)
+#define IE_CERR (0x01 << 28)
+#define IE_BADA (0x01 << 29)
+
+#define VS30_3V0SUP (1 << 25)
+#define VS18_1V8SUP (1 << 26)
+
+/* Driver definitions */
+#define MMCSD_SECTOR_SIZE 512
+#define MMC_CARD 0
+#define SD_CARD 1
+#define BYTE_MODE 0
+#define SECTOR_MODE 1
+#define CLK_INITSEQ 0
+#define CLK_400KHZ 1
+#define CLK_MISC 2
+
+#define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK)
+#define MMC_CMD0 (INDEX(0) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE)
+
+/* Clock Configurations and Macros */
+#define MMC_CLOCK_REFERENCE 96 /* MHz */
+
+#define mmc_reg_out(addr, mask, val)\
+ writel((readl(addr) & (~(mask))) | ((val) & (mask)), (addr))
+
+int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio,
+ int wp_gpio);
+
+
+#endif /* OMAP_MMC_H_ */
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 24c7e7a..6ae161a 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -42,6 +42,7 @@ ifndef CONFIG_SPL_BUILD
ifndef CONFIG_SYS_GENERIC_BOARD
COBJS-y += board.o
endif
+COBJS-y += bss.o
COBJS-y += bootm.o
COBJS-$(CONFIG_SYS_L2_PL310) += cache-pl310.o
diff --git a/arch/arm/lib/bss.c b/arch/arm/lib/bss.c
new file mode 100644
index 0000000..99eda59
--- /dev/null
+++ b/arch/arm/lib/bss.c
@@ -0,0 +1,39 @@
+/*
+ * Copyright 2013 Albert ARIBAUD <albert.u.boot@aribaud.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/**
+ * These two symbols are declared in a C file so that the linker
+ * uses R_ARM_RELATIVE relocation, rather than the R_ARM_ABS32 one
+ * it would use if the symbols were defined in the linker file.
+ * Using only R_ARM_RELATIVE relocation ensures that references to
+ * the symbols are correct after as well as before relocation.
+ *
+ * We need a 0-byte-size type for these symbols, and the compiler
+ * does not allow defining objects of C type 'void'. Using an empty
+ * struct is allowed by the compiler, but causes gcc versions 4.4 and
+ * below to complain about aliasing. Therefore we use the next best
+ * thing: zero-sized arrays, which are both 0-byte-size and exempt from
+ * aliasing warnings.
+ */
+
+char __bss_start[0] __attribute__((used, section(".__bss_start")));
+char __bss_end[0] __attribute__((used, section(".__bss_end")));
diff --git a/arch/avr32/cpu/u-boot.lds b/arch/avr32/cpu/u-boot.lds
index d096424..4e4a436 100644
--- a/arch/avr32/cpu/u-boot.lds
+++ b/arch/avr32/cpu/u-boot.lds
@@ -50,7 +50,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = ALIGN(4);
diff --git a/arch/blackfin/cpu/u-boot.lds b/arch/blackfin/cpu/u-boot.lds
index 58db838..77f48c1 100644
--- a/arch/blackfin/cpu/u-boot.lds
+++ b/arch/blackfin/cpu/u-boot.lds
@@ -114,7 +114,7 @@ SECTIONS
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
} >ram_data
.text_l1 :
diff --git a/arch/microblaze/cpu/u-boot.lds b/arch/microblaze/cpu/u-boot.lds
index fe3d97d..1ae4184 100644
--- a/arch/microblaze/cpu/u-boot.lds
+++ b/arch/microblaze/cpu/u-boot.lds
@@ -54,7 +54,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
.bss ALIGN(0x4):
diff --git a/arch/mips/cpu/u-boot.lds b/arch/mips/cpu/u-boot.lds
index 10513ab..ca18d46 100644
--- a/arch/mips/cpu/u-boot.lds
+++ b/arch/mips/cpu/u-boot.lds
@@ -64,7 +64,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = ALIGN(4);
diff --git a/arch/nds32/cpu/n1213/u-boot.lds b/arch/nds32/cpu/n1213/u-boot.lds
index c64d3b7..e9fbcd3 100644
--- a/arch/nds32/cpu/n1213/u-boot.lds
+++ b/arch/nds32/cpu/n1213/u-boot.lds
@@ -55,7 +55,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = ALIGN(4);
diff --git a/arch/nios2/cpu/u-boot.lds b/arch/nios2/cpu/u-boot.lds
index 90a7795..4c45336 100644
--- a/arch/nios2/cpu/u-boot.lds
+++ b/arch/nios2/cpu/u-boot.lds
@@ -48,7 +48,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
/* INIT DATA sections - "Small" data (see the gcc -G option)
diff --git a/arch/powerpc/cpu/74xx_7xx/u-boot.lds b/arch/powerpc/cpu/74xx_7xx/u-boot.lds
index ce03db0..40b89ab 100644
--- a/arch/powerpc/cpu/74xx_7xx/u-boot.lds
+++ b/arch/powerpc/cpu/74xx_7xx/u-boot.lds
@@ -65,7 +65,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/arch/powerpc/cpu/mpc512x/u-boot.lds b/arch/powerpc/cpu/mpc512x/u-boot.lds
index 66ff02f..0d86979 100644
--- a/arch/powerpc/cpu/mpc512x/u-boot.lds
+++ b/arch/powerpc/cpu/mpc512x/u-boot.lds
@@ -60,7 +60,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/arch/powerpc/cpu/mpc5xx/u-boot.lds b/arch/powerpc/cpu/mpc5xx/u-boot.lds
index 0001e58..8385a29 100644
--- a/arch/powerpc/cpu/mpc5xx/u-boot.lds
+++ b/arch/powerpc/cpu/mpc5xx/u-boot.lds
@@ -68,7 +68,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds b/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds
index bc59fad..590952f 100644
--- a/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds
+++ b/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds
@@ -68,7 +68,7 @@ SECTIONS
. = .;
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/arch/powerpc/cpu/mpc5xxx/u-boot.lds b/arch/powerpc/cpu/mpc5xxx/u-boot.lds
index d179dbc..06ece78 100644
--- a/arch/powerpc/cpu/mpc5xxx/u-boot.lds
+++ b/arch/powerpc/cpu/mpc5xxx/u-boot.lds
@@ -63,7 +63,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/arch/powerpc/cpu/mpc8220/u-boot.lds b/arch/powerpc/cpu/mpc8220/u-boot.lds
index ec98f0f..dc63d20 100644
--- a/arch/powerpc/cpu/mpc8220/u-boot.lds
+++ b/arch/powerpc/cpu/mpc8220/u-boot.lds
@@ -62,7 +62,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/arch/powerpc/cpu/mpc824x/u-boot.lds b/arch/powerpc/cpu/mpc824x/u-boot.lds
index 74e2a23..4590fab 100644
--- a/arch/powerpc/cpu/mpc824x/u-boot.lds
+++ b/arch/powerpc/cpu/mpc824x/u-boot.lds
@@ -63,7 +63,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/arch/powerpc/cpu/mpc8260/u-boot.lds b/arch/powerpc/cpu/mpc8260/u-boot.lds
index ce28dba..eb1c611 100644
--- a/arch/powerpc/cpu/mpc8260/u-boot.lds
+++ b/arch/powerpc/cpu/mpc8260/u-boot.lds
@@ -62,7 +62,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/arch/powerpc/cpu/mpc83xx/u-boot.lds b/arch/powerpc/cpu/mpc83xx/u-boot.lds
index 22e92e9..a9d8598 100644
--- a/arch/powerpc/cpu/mpc83xx/u-boot.lds
+++ b/arch/powerpc/cpu/mpc83xx/u-boot.lds
@@ -61,7 +61,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds b/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds
index 8a44a36..65106f5 100644
--- a/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds
+++ b/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds
@@ -72,7 +72,7 @@ SECTIONS
. = .;
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds
index 15c73c1..80cd980 100644
--- a/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds
+++ b/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds
@@ -54,7 +54,7 @@ SECTIONS
_edata = .;
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = ALIGN(8);
diff --git a/arch/powerpc/cpu/mpc85xx/u-boot.lds b/arch/powerpc/cpu/mpc85xx/u-boot.lds
index d2bf7b7..0503dce 100644
--- a/arch/powerpc/cpu/mpc85xx/u-boot.lds
+++ b/arch/powerpc/cpu/mpc85xx/u-boot.lds
@@ -80,7 +80,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/arch/powerpc/cpu/mpc86xx/u-boot.lds b/arch/powerpc/cpu/mpc86xx/u-boot.lds
index 65386b8..7e357ba 100644
--- a/arch/powerpc/cpu/mpc86xx/u-boot.lds
+++ b/arch/powerpc/cpu/mpc86xx/u-boot.lds
@@ -67,7 +67,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/arch/powerpc/cpu/ppc4xx/u-boot.lds b/arch/powerpc/cpu/ppc4xx/u-boot.lds
index 8c6beb0..06010d6 100644
--- a/arch/powerpc/cpu/ppc4xx/u-boot.lds
+++ b/arch/powerpc/cpu/ppc4xx/u-boot.lds
@@ -81,7 +81,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/arch/sandbox/cpu/u-boot.lds b/arch/sandbox/cpu/u-boot.lds
index 1b781eb..94c26f1 100644
--- a/arch/sandbox/cpu/u-boot.lds
+++ b/arch/sandbox/cpu/u-boot.lds
@@ -27,7 +27,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
__u_boot_sandbox_option_start = .;
diff --git a/arch/sh/cpu/sh2/u-boot.lds b/arch/sh/cpu/sh2/u-boot.lds
index 20cb459..3cd5699 100644
--- a/arch/sh/cpu/sh2/u-boot.lds
+++ b/arch/sh/cpu/sh2/u-boot.lds
@@ -74,7 +74,7 @@ SECTIONS
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
PROVIDE (reloc_dst_end = .);
diff --git a/arch/sh/cpu/sh3/u-boot.lds b/arch/sh/cpu/sh3/u-boot.lds
index b5f60f2..654c52c 100644
--- a/arch/sh/cpu/sh3/u-boot.lds
+++ b/arch/sh/cpu/sh3/u-boot.lds
@@ -80,7 +80,7 @@ SECTIONS
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
PROVIDE (reloc_dst_end = .);
diff --git a/arch/sh/cpu/sh4/u-boot.lds b/arch/sh/cpu/sh4/u-boot.lds
index 5721c18..11d7ffa 100644
--- a/arch/sh/cpu/sh4/u-boot.lds
+++ b/arch/sh/cpu/sh4/u-boot.lds
@@ -77,7 +77,7 @@ SECTIONS
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
PROVIDE (reloc_dst_end = .);
diff --git a/arch/x86/cpu/u-boot.lds b/arch/x86/cpu/u-boot.lds
index 69e6ea6..2d6911a 100644
--- a/arch/x86/cpu/u-boot.lds
+++ b/arch/x86/cpu/u-boot.lds
@@ -36,7 +36,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = ALIGN(4);
diff --git a/board/BuS/eb_cpu5282/u-boot.lds b/board/BuS/eb_cpu5282/u-boot.lds
index 7c1695a..c72043d 100644
--- a/board/BuS/eb_cpu5282/u-boot.lds
+++ b/board/BuS/eb_cpu5282/u-boot.lds
@@ -68,7 +68,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/LEOX/elpt860/u-boot.lds b/board/LEOX/elpt860/u-boot.lds
index ee2c705..2b76e92 100644
--- a/board/LEOX/elpt860/u-boot.lds
+++ b/board/LEOX/elpt860/u-boot.lds
@@ -89,7 +89,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/RPXClassic/u-boot.lds b/board/RPXClassic/u-boot.lds
index a507d73..3334a44 100644
--- a/board/RPXClassic/u-boot.lds
+++ b/board/RPXClassic/u-boot.lds
@@ -69,7 +69,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/RPXClassic/u-boot.lds.debug b/board/RPXClassic/u-boot.lds.debug
index dc8c4e9..e88bd97 100644
--- a/board/RPXClassic/u-boot.lds.debug
+++ b/board/RPXClassic/u-boot.lds.debug
@@ -109,7 +109,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/RPXlite/u-boot.lds b/board/RPXlite/u-boot.lds
index a507d73..3334a44 100644
--- a/board/RPXlite/u-boot.lds
+++ b/board/RPXlite/u-boot.lds
@@ -69,7 +69,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/RPXlite/u-boot.lds.debug b/board/RPXlite/u-boot.lds.debug
index dc8c4e9..e88bd97 100644
--- a/board/RPXlite/u-boot.lds.debug
+++ b/board/RPXlite/u-boot.lds.debug
@@ -109,7 +109,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/RPXlite_dw/u-boot.lds b/board/RPXlite_dw/u-boot.lds
index a507d73..3334a44 100644
--- a/board/RPXlite_dw/u-boot.lds
+++ b/board/RPXlite_dw/u-boot.lds
@@ -69,7 +69,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/RPXlite_dw/u-boot.lds.debug b/board/RPXlite_dw/u-boot.lds.debug
index b43a1e4..88c410c 100644
--- a/board/RPXlite_dw/u-boot.lds.debug
+++ b/board/RPXlite_dw/u-boot.lds.debug
@@ -109,7 +109,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/RRvision/u-boot.lds b/board/RRvision/u-boot.lds
index 646931a..84bb763 100644
--- a/board/RRvision/u-boot.lds
+++ b/board/RRvision/u-boot.lds
@@ -74,7 +74,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/actux1/u-boot.lds b/board/actux1/u-boot.lds
index a0d217b..c76728a 100644
--- a/board/actux1/u-boot.lds
+++ b/board/actux1/u-boot.lds
@@ -41,15 +41,15 @@ SECTIONS
*(.text*)
}
- . = ALIGN (4);
+ . = ALIGN(4);
.rodata : {
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- . = ALIGN (4);
+ . = ALIGN(4);
.data : {
*(.data*)
}
- . = ALIGN (4);
+ . = ALIGN(4);
.got : {
*(.got)
}
@@ -57,7 +57,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = ALIGN (4);
@@ -72,13 +72,21 @@ SECTIONS
*(.dynsym)
}
- .bss __rel_dyn_start (OVERLAY) : {
- __bss_start = .;
+ _end = .;
+
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ }
+
+ .bss __bss_start (OVERLAY) : {
*(.bss*)
. = ALIGN(4);
- _end = .;
+ __bss_end = .;
}
- __bss_end =.;
+ .bss_end __bss_end (OVERLAY) : {
+ KEEP(*(__bss_end));
+ }
+
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
/DISCARD/ : { *(.plt*) }
diff --git a/board/actux2/u-boot.lds b/board/actux2/u-boot.lds
index da2b4e2..984f70e 100644
--- a/board/actux2/u-boot.lds
+++ b/board/actux2/u-boot.lds
@@ -41,15 +41,15 @@ SECTIONS
*(.text*)
}
- . = ALIGN (4);
+ . = ALIGN(4);
.rodata : {
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- . = ALIGN (4);
+ . = ALIGN(4);
.data : {
*(.data*)
}
- . = ALIGN (4);
+ . = ALIGN(4);
.got : {
*(.got)
}
@@ -57,7 +57,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = ALIGN (4);
@@ -72,13 +72,21 @@ SECTIONS
*(.dynsym)
}
- .bss __rel_dyn_start (OVERLAY) : {
- __bss_start = .;
+ _end = .;
+
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ }
+
+ .bss __bss_start (OVERLAY) : {
*(.bss*)
. = ALIGN(4);
- _end = .;
+ __bss_end = .;
}
- __bss_end =.;
+ .bss_end __bss_end (OVERLAY) : {
+ KEEP(*(__bss_end));
+ }
+
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
/DISCARD/ : { *(.plt*) }
diff --git a/board/actux3/u-boot.lds b/board/actux3/u-boot.lds
index f922033..fc48cf0 100644
--- a/board/actux3/u-boot.lds
+++ b/board/actux3/u-boot.lds
@@ -57,7 +57,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = ALIGN (4);
@@ -72,13 +72,21 @@ SECTIONS
*(.dynsym)
}
- .bss __rel_dyn_start (OVERLAY) : {
- __bss_start = .;
+ _end = .;
+
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ }
+
+ .bss __bss_start (OVERLAY) : {
*(.bss*)
. = ALIGN(4);
- _end = .;
+ __bss_end = .;
}
- __bss_end =.;
+ .bss_end __bss_end (OVERLAY) : {
+ KEEP(*(__bss_end));
+ }
+
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
/DISCARD/ : { *(.plt*) }
diff --git a/board/adder/u-boot.lds b/board/adder/u-boot.lds
index 2f10e7c..def2f1f 100644
--- a/board/adder/u-boot.lds
+++ b/board/adder/u-boot.lds
@@ -65,7 +65,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/ait/cam_enc_4xx/u-boot-spl.lds b/board/ait/cam_enc_4xx/u-boot-spl.lds
index d6b66d4..dd9d52d 100644
--- a/board/ait/cam_enc_4xx/u-boot-spl.lds
+++ b/board/ait/cam_enc_4xx/u-boot-spl.lds
@@ -48,10 +48,6 @@ SECTIONS
. = ALIGN(4);
.data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
. = ALIGN(4);
- .u_boot_list : {
- #include <u-boot.lst>
- } >.sram
- . = ALIGN(4);
.rel.dyn : {
__rel_dyn_start = .;
*(.rel*)
diff --git a/board/altera/nios2-generic/u-boot.lds b/board/altera/nios2-generic/u-boot.lds
index bf7600a..f309598 100644
--- a/board/altera/nios2-generic/u-boot.lds
+++ b/board/altera/nios2-generic/u-boot.lds
@@ -49,7 +49,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
/* INIT DATA sections - "Small" data (see the gcc -G option)
diff --git a/board/amcc/acadia/u-boot-nand.lds b/board/amcc/acadia/u-boot-nand.lds
index 3bdad34..e9f026f 100644
--- a/board/amcc/acadia/u-boot-nand.lds
+++ b/board/amcc/acadia/u-boot-nand.lds
@@ -74,7 +74,7 @@ SECTIONS
. = .;
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/amcc/bamboo/u-boot-nand.lds b/board/amcc/bamboo/u-boot-nand.lds
index 1f9a4ae..209f484 100644
--- a/board/amcc/bamboo/u-boot-nand.lds
+++ b/board/amcc/bamboo/u-boot-nand.lds
@@ -75,7 +75,7 @@ SECTIONS
. = .;
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/amcc/canyonlands/u-boot-nand.lds b/board/amcc/canyonlands/u-boot-nand.lds
index 0396c9f..3d61613 100644
--- a/board/amcc/canyonlands/u-boot-nand.lds
+++ b/board/amcc/canyonlands/u-boot-nand.lds
@@ -75,7 +75,7 @@ SECTIONS
. = .;
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/amcc/kilauea/u-boot-nand.lds b/board/amcc/kilauea/u-boot-nand.lds
index 3bdad34..e9f026f 100644
--- a/board/amcc/kilauea/u-boot-nand.lds
+++ b/board/amcc/kilauea/u-boot-nand.lds
@@ -74,7 +74,7 @@ SECTIONS
. = .;
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/amcc/sequoia/u-boot-nand.lds b/board/amcc/sequoia/u-boot-nand.lds
index 9a2a232..2ea3944 100644
--- a/board/amcc/sequoia/u-boot-nand.lds
+++ b/board/amcc/sequoia/u-boot-nand.lds
@@ -75,7 +75,7 @@ SECTIONS
. = .;
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/amcc/sequoia/u-boot-ram.lds b/board/amcc/sequoia/u-boot-ram.lds
index e853da8..1b537f6 100644
--- a/board/amcc/sequoia/u-boot-ram.lds
+++ b/board/amcc/sequoia/u-boot-ram.lds
@@ -66,7 +66,7 @@ SECTIONS
. = .;
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/astro/mcf5373l/u-boot.lds b/board/astro/mcf5373l/u-boot.lds
index 11aa092..264e43f 100644
--- a/board/astro/mcf5373l/u-boot.lds
+++ b/board/astro/mcf5373l/u-boot.lds
@@ -72,7 +72,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c
index 2555672..3aa394a 100644
--- a/board/atmel/at91sam9260ek/at91sam9260ek.c
+++ b/board/atmel/at91sam9260ek/at91sam9260ek.c
@@ -157,13 +157,18 @@ int board_early_init_f(void)
int board_init(void)
{
+#ifdef CONFIG_AT91SAM9G20EK_2MMC
+ /* arch number of AT91SAM9G20EK_2MMC-Board */
+ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK_2MMC;
+#else
#ifdef CONFIG_AT91SAM9G20EK
- /* arch number of AT91SAM9260EK-Board */
+ /* arch number of AT91SAM9G20EK-Board */
gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK;
#else
/* arch number of AT91SAM9260EK-Board */
gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9260EK;
#endif
+#endif
/* adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
diff --git a/board/avionic-design/common/tamonten.c b/board/avionic-design/common/tamonten.c
index e6a932e..ea95e43 100644
--- a/board/avionic-design/common/tamonten.c
+++ b/board/avionic-design/common/tamonten.c
@@ -33,13 +33,8 @@
#include <asm/arch/tegra.h>
#include <asm/arch-tegra/board.h>
#include <asm/arch-tegra/clk_rst.h>
-#include <asm/arch-tegra/mmc.h>
#include <asm/arch-tegra/sys_proto.h>
#include <asm/arch-tegra/uart.h>
-#ifdef CONFIG_TEGRA_MMC
-#include <mmc.h>
-#endif
-
#ifdef CONFIG_BOARD_EARLY_INIT_F
void gpio_early_init(void)
@@ -54,7 +49,7 @@ void gpio_early_init(void)
* Routine: pin_mux_mmc
* Description: setup the pin muxes/tristate values for the SDMMC(s)
*/
-static void pin_mux_mmc(void)
+void pin_mux_mmc(void)
{
funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT);
/* for write-protect GPIO PI6 */
@@ -62,16 +57,4 @@ static void pin_mux_mmc(void)
/* for CD GPIO PH2 */
pinmux_tristate_disable(PINGRP_ATD);
}
-
-/* this is a weak define that we are overriding */
-int board_mmc_init(bd_t *bd)
-{
- /* Enable muxes, etc. for SDMMC controllers */
- pin_mux_mmc();
-
- /* init dev 0, SD slot, with 4-bit bus */
- tegra_mmc_init(0, 4, GPIO_PI6, GPIO_PH2);
-
- return 0;
-}
#endif
diff --git a/board/avionic-design/dts/tegra20-medcom-wide.dts b/board/avionic-design/dts/tegra20-medcom-wide.dts
index e46afbe..a9a07f9 100644
--- a/board/avionic-design/dts/tegra20-medcom-wide.dts
+++ b/board/avionic-design/dts/tegra20-medcom-wide.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ ARCH_CPU_DTS
+#include "tegra20-tamonten.dtsi"
/ {
model = "Avionic Design Medcom-Wide";
@@ -8,6 +8,7 @@
aliases {
usb0 = "/usb@c5008000";
+ sdhci0 = "/sdhci@c8000600";
};
memory {
diff --git a/board/avionic-design/dts/tegra20-plutux.dts b/board/avionic-design/dts/tegra20-plutux.dts
index 3e6cce0..20016f2 100644
--- a/board/avionic-design/dts/tegra20-plutux.dts
+++ b/board/avionic-design/dts/tegra20-plutux.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ ARCH_CPU_DTS
+#include "tegra20-tamonten.dtsi"
/ {
model = "Avionic Design Plutux";
@@ -8,6 +8,7 @@
aliases {
usb0 = "/usb@c5008000";
+ sdhci0 = "/sdhci@c8000600";
};
memory {
diff --git a/board/avionic-design/dts/tegra20-tamonten.dtsi b/board/avionic-design/dts/tegra20-tamonten.dtsi
new file mode 100644
index 0000000..86c7bab
--- /dev/null
+++ b/board/avionic-design/dts/tegra20-tamonten.dtsi
@@ -0,0 +1,489 @@
+#include "tegra20.dtsi"
+
+/ {
+ model = "Avionic Design Tamonten SOM";
+ compatible = "ad,tamonten", "nvidia,tegra20";
+
+ memory {
+ reg = <0x00000000 0x20000000>;
+ };
+
+ host1x {
+ hdmi {
+ vdd-supply = <&hdmi_vdd_reg>;
+ pll-supply = <&hdmi_pll_reg>;
+
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+ };
+ };
+
+ pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ ata {
+ nvidia,pins = "ata";
+ nvidia,function = "ide";
+ };
+ atb {
+ nvidia,pins = "atb", "gma", "gme";
+ nvidia,function = "sdio4";
+ };
+ atc {
+ nvidia,pins = "atc";
+ nvidia,function = "nand";
+ };
+ atd {
+ nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu",
+ "spia", "spib", "spic";
+ nvidia,function = "gmi";
+ };
+ cdev1 {
+ nvidia,pins = "cdev1";
+ nvidia,function = "plla_out";
+ };
+ cdev2 {
+ nvidia,pins = "cdev2";
+ nvidia,function = "pllp_out4";
+ };
+ crtp {
+ nvidia,pins = "crtp";
+ nvidia,function = "crt";
+ };
+ csus {
+ nvidia,pins = "csus";
+ nvidia,function = "vi_sensor_clk";
+ };
+ dap1 {
+ nvidia,pins = "dap1";
+ nvidia,function = "dap1";
+ };
+ dap2 {
+ nvidia,pins = "dap2";
+ nvidia,function = "dap2";
+ };
+ dap3 {
+ nvidia,pins = "dap3";
+ nvidia,function = "dap3";
+ };
+ dap4 {
+ nvidia,pins = "dap4";
+ nvidia,function = "dap4";
+ };
+ dta {
+ nvidia,pins = "dta", "dtd";
+ nvidia,function = "sdio2";
+ };
+ dtb {
+ nvidia,pins = "dtb", "dtc", "dte";
+ nvidia,function = "rsvd1";
+ };
+ dtf {
+ nvidia,pins = "dtf";
+ nvidia,function = "i2c3";
+ };
+ gmc {
+ nvidia,pins = "gmc";
+ nvidia,function = "uartd";
+ };
+ gpu7 {
+ nvidia,pins = "gpu7";
+ nvidia,function = "rtck";
+ };
+ gpv {
+ nvidia,pins = "gpv", "slxa", "slxk";
+ nvidia,function = "pcie";
+ };
+ hdint {
+ nvidia,pins = "hdint";
+ nvidia,function = "hdmi";
+ };
+ i2cp {
+ nvidia,pins = "i2cp";
+ nvidia,function = "i2cp";
+ };
+ irrx {
+ nvidia,pins = "irrx", "irtx";
+ nvidia,function = "uarta";
+ };
+ kbca {
+ nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+ "kbce", "kbcf";
+ nvidia,function = "kbc";
+ };
+ lcsn {
+ nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
+ "ld3", "ld4", "ld5", "ld6", "ld7",
+ "ld8", "ld9", "ld10", "ld11", "ld12",
+ "ld13", "ld14", "ld15", "ld16", "ld17",
+ "ldc", "ldi", "lhp0", "lhp1", "lhp2",
+ "lhs", "lm0", "lm1", "lpp", "lpw0",
+ "lpw1", "lpw2", "lsc0", "lsc1", "lsck",
+ "lsda", "lsdi", "lspi", "lvp0", "lvp1",
+ "lvs";
+ nvidia,function = "displaya";
+ };
+ owc {
+ nvidia,pins = "owc", "spdi", "spdo", "uac";
+ nvidia,function = "rsvd2";
+ };
+ pmc {
+ nvidia,pins = "pmc";
+ nvidia,function = "pwr_on";
+ };
+ rm {
+ nvidia,pins = "rm";
+ nvidia,function = "i2c1";
+ };
+ sdb {
+ nvidia,pins = "sdb", "sdc", "sdd";
+ nvidia,function = "pwm";
+ };
+ sdio1 {
+ nvidia,pins = "sdio1";
+ nvidia,function = "sdio1";
+ };
+ slxc {
+ nvidia,pins = "slxc", "slxd";
+ nvidia,function = "spdif";
+ };
+ spid {
+ nvidia,pins = "spid", "spie", "spif";
+ nvidia,function = "spi1";
+ };
+ spig {
+ nvidia,pins = "spig", "spih";
+ nvidia,function = "spi2_alt";
+ };
+ uaa {
+ nvidia,pins = "uaa", "uab", "uda";
+ nvidia,function = "ulpi";
+ };
+ uad {
+ nvidia,pins = "uad";
+ nvidia,function = "irda";
+ };
+ uca {
+ nvidia,pins = "uca", "ucb";
+ nvidia,function = "uartc";
+ };
+ conf_ata {
+ nvidia,pins = "ata", "atb", "atc", "atd", "ate",
+ "cdev1", "cdev2", "dap1", "dtb", "gma",
+ "gmb", "gmc", "gmd", "gme", "gpu7",
+ "gpv", "i2cp", "pta", "rm", "slxa",
+ "slxk", "spia", "spib", "uac";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+ conf_ck32 {
+ nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+ "pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+ nvidia,pull = <0>;
+ };
+ conf_csus {
+ nvidia,pins = "csus", "spid", "spif";
+ nvidia,pull = <1>;
+ nvidia,tristate = <1>;
+ };
+ conf_crtp {
+ nvidia,pins = "crtp", "dap2", "dap3", "dap4",
+ "dtc", "dte", "dtf", "gpu", "sdio1",
+ "slxc", "slxd", "spdi", "spdo", "spig",
+ "uda";
+ nvidia,pull = <0>;
+ nvidia,tristate = <1>;
+ };
+ conf_ddc {
+ nvidia,pins = "ddc", "dta", "dtd", "kbca",
+ "kbcb", "kbcc", "kbcd", "kbce", "kbcf",
+ "sdc";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ };
+ conf_hdint {
+ nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+ "lpw1", "lsc1", "lsck", "lsda", "lsdi",
+ "lvp0", "owc", "sdb";
+ nvidia,tristate = <1>;
+ };
+ conf_irrx {
+ nvidia,pins = "irrx", "irtx", "sdd", "spic",
+ "spie", "spih", "uaa", "uab", "uad",
+ "uca", "ucb";
+ nvidia,pull = <2>;
+ nvidia,tristate = <1>;
+ };
+ conf_lc {
+ nvidia,pins = "lc", "ls";
+ nvidia,pull = <2>;
+ };
+ conf_ld0 {
+ nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+ "ld5", "ld6", "ld7", "ld8", "ld9",
+ "ld10", "ld11", "ld12", "ld13", "ld14",
+ "ld15", "ld16", "ld17", "ldi", "lhp0",
+ "lhp1", "lhp2", "lhs", "lm0", "lpp",
+ "lpw0", "lpw2", "lsc0", "lspi", "lvp1",
+ "lvs", "pmc";
+ nvidia,tristate = <0>;
+ };
+ conf_ld17_0 {
+ nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+ "ld23_22";
+ nvidia,pull = <1>;
+ };
+ };
+
+ state_i2cmux_ddc: pinmux_i2cmux_ddc {
+ ddc {
+ nvidia,pins = "ddc";
+ nvidia,function = "i2c2";
+ };
+ pta {
+ nvidia,pins = "pta";
+ nvidia,function = "rsvd4";
+ };
+ };
+
+ state_i2cmux_pta: pinmux_i2cmux_pta {
+ ddc {
+ nvidia,pins = "ddc";
+ nvidia,function = "rsvd4";
+ };
+ pta {
+ nvidia,pins = "pta";
+ nvidia,function = "i2c2";
+ };
+ };
+
+ state_i2cmux_idle: pinmux_i2cmux_idle {
+ ddc {
+ nvidia,pins = "ddc";
+ nvidia,function = "rsvd4";
+ };
+ pta {
+ nvidia,pins = "pta";
+ nvidia,function = "rsvd4";
+ };
+ };
+ };
+
+ i2s@70002800 {
+ status = "okay";
+ };
+
+ serial@70006300 {
+ status = "okay";
+ };
+
+ i2c@7000c000 {
+ clock-frequency = <400000>;
+ status = "okay";
+ };
+
+ i2c@7000c400 {
+ clock-frequency = <100000>;
+ status = "okay";
+ };
+
+ i2cmux {
+ compatible = "i2c-mux-pinctrl";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c-parent = <&{/i2c@7000c400}>;
+
+ pinctrl-names = "ddc", "pta", "idle";
+ pinctrl-0 = <&state_i2cmux_ddc>;
+ pinctrl-1 = <&state_i2cmux_pta>;
+ pinctrl-2 = <&state_i2cmux_idle>;
+
+ hdmi_ddc: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ i2c@7000d000 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ pmic: tps6586x@34 {
+ compatible = "ti,tps6586x";
+ reg = <0x34>;
+ interrupts = <0 86 0x4>;
+
+ ti,system-power-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ sys-supply = <&vdd_5v0_reg>;
+ vin-sm0-supply = <&sys_reg>;
+ vin-sm1-supply = <&sys_reg>;
+ vin-sm2-supply = <&sys_reg>;
+ vinldo01-supply = <&sm2_reg>;
+ vinldo23-supply = <&sm2_reg>;
+ vinldo4-supply = <&sm2_reg>;
+ vinldo678-supply = <&sm2_reg>;
+ vinldo9-supply = <&sm2_reg>;
+
+ regulators {
+ sys_reg: sys {
+ regulator-name = "vdd_sys";
+ regulator-always-on;
+ };
+
+ sm0 {
+ regulator-name = "vdd_sys_sm0,vdd_core";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ sm1 {
+ regulator-name = "vdd_sys_sm1,vdd_cpu";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ sm2_reg: sm2 {
+ regulator-name = "vdd_sys_sm2,vin_ldo*";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+ };
+
+ ldo0 {
+ regulator-name = "vdd_ldo0,vddio_pex_clk";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo1 {
+ regulator-name = "vdd_ldo1,avdd_pll*";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ ldo2 {
+ regulator-name = "vdd_ldo2,vdd_rtc";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo3 {
+ regulator-name = "vdd_ldo3,avdd_usb*";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo4 {
+ regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo5 {
+ regulator-name = "vdd_ldo5,vcore_mmc";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ ldo6 {
+ regulator-name = "vdd_ldo6,avdd_vdac";
+ /*
+ * According to the Tegra 2 Automotive
+ * DataSheet, a typical value for this
+ * would be 2.8V, but the PMIC only
+ * supports 2.85V.
+ */
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ hdmi_vdd_reg: ldo7 {
+ regulator-name = "vdd_ldo7,avdd_hdmi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ hdmi_pll_reg: ldo8 {
+ regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo9 {
+ regulator-name = "vdd_ldo9,vdd_ddr_rx,avdd_cam";
+ /*
+ * According to the Tegra 2 Automotive
+ * DataSheet, a typical value for this
+ * would be 2.8V, but the PMIC only
+ * supports 2.85V.
+ */
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ ldo_rtc {
+ regulator-name = "vdd_rtc_out";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ temperature-sensor@4c {
+ compatible = "onnn,nct1008";
+ reg = <0x4c>;
+ };
+ };
+
+ pmc {
+ nvidia,invert-interrupt;
+ };
+
+ usb@c5008000 {
+ status = "okay";
+ };
+
+ sdhci@c8000600 {
+ cd-gpios = <&gpio 58 1>; /* gpio PH2 */
+ wp-gpios = <&gpio 59 0>; /* gpio PH3 */
+ bus-width = <4>;
+ status = "okay";
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_5v0_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "vdd_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+ };
+};
diff --git a/board/avionic-design/dts/tegra20-tec.dts b/board/avionic-design/dts/tegra20-tec.dts
index bf3ff1d..1d7cf89 100644
--- a/board/avionic-design/dts/tegra20-tec.dts
+++ b/board/avionic-design/dts/tegra20-tec.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ ARCH_CPU_DTS
+#include "tegra20-tamonten.dtsi"
/ {
model = "Avionic Design Tamonten Evaluation Carrier";
@@ -8,6 +8,7 @@
aliases {
usb0 = "/usb@c5008000";
+ sdhci0 = "/sdhci@c8000600";
};
memory {
diff --git a/board/boundary/nitrogen6x/1066mhz_4x128mx16.cfg b/board/boundary/nitrogen6x/1066mhz_4x128mx16.cfg
new file mode 100644
index 0000000..16a37d0
--- /dev/null
+++ b/board/boundary/nitrogen6x/1066mhz_4x128mx16.cfg
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not write to the Free Software
+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+ * MA 02110-1301 USA
+ *
+ */
+DATA 4, MX6_MMDC_P0_MDPDC, 0x00020036
+DATA 4, MX6_MMDC_P0_MDCFG0, 0x555A7974
+DATA 4, MX6_MMDC_P0_MDCFG1, 0xDB538F64
+DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB
+DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2
+DATA 4, MX6_MMDC_P0_MDOR, 0x005A1023
+DATA 4, MX6_MMDC_P0_MDOTC, 0x09444040
+DATA 4, MX6_MMDC_P0_MDPDC, 0x00025576
+DATA 4, MX6_MMDC_P0_MDASP, 0x00000027
+DATA 4, MX6_MMDC_P0_MDCTL, 0x831A0000
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04088032
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00428031
+DATA 4, MX6_MMDC_P0_MDSCR, 0x19308030
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040
+DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P0_MDREF, 0x00005800
+DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227
+DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227
+DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x42720306
+DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x026F0266
+DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x4273030A
+DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x02740240
+DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x45393B3E
+DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x403A3747
+DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x40434541
+DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x473E4A3B
+DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x0011000E
+DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x000E001B
+DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x00190015
+DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x00070018
+DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000
+DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006
diff --git a/board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg b/board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg
new file mode 100644
index 0000000..0607703
--- /dev/null
+++ b/board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not write to the Free Software
+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+ * MA 02110-1301 USA
+ *
+ */
+DATA 4, MX6_MMDC_P0_MDPDC, 0x00020036
+DATA 4, MX6_MMDC_P0_MDCFG0, 0x898E7974
+DATA 4, MX6_MMDC_P0_MDCFG1, 0xDB538F64
+DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB
+DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2
+DATA 4, MX6_MMDC_P0_MDOR, 0x008E1023
+DATA 4, MX6_MMDC_P0_MDOTC, 0x09444040
+DATA 4, MX6_MMDC_P0_MDPDC, 0x00025576
+DATA 4, MX6_MMDC_P0_MDASP, 0x00000047
+DATA 4, MX6_MMDC_P0_MDCTL, 0x841A0000
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04088032
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00428031
+DATA 4, MX6_MMDC_P0_MDSCR, 0x19308030
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040
+DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P0_MDREF, 0x00007800
+DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227
+DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227
+DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x43040319
+DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x03040279
+DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x43040321
+DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x03030251
+DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x4d434248
+DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x42413c4d
+DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x34424543
+DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x49324933
+DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x001a0017
+DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x001F001F
+DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x00170027
+DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x000a001f
+DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000
+DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006
diff --git a/board/boundary/nitrogen6x/6x_bootscript.txt b/board/boundary/nitrogen6x/6x_bootscript.txt
new file mode 100644
index 0000000..061b3a4
--- /dev/null
+++ b/board/boundary/nitrogen6x/6x_bootscript.txt
@@ -0,0 +1,63 @@
+setenv bootargs enable_wait_mode=off
+setenv nextcon 0;
+
+if hdmidet ; then
+ setenv bootargs $bootargs video=mxcfb${nextcon}:dev=hdmi,1280x720M@60,if=RGB24
+ setenv fbmem "fbmem=28M";
+ setexpr nextcon $nextcon + 1
+else
+ echo "------ no HDMI monitor";
+fi
+
+i2c dev 2
+if i2c probe 0x04 ; then
+ setenv bootargs $bootargs video=mxcfb${nextcon}:dev=ldb,LDB-XGA,if=RGB666
+ if test "0" -eq $nextcon; then
+ setenv fbmem "fbmem=10M";
+ else
+ setenv fbmem ${fbmem},10M
+ fi
+ setexpr nextcon $nextcon + 1
+else
+ echo "------ no Freescale display";
+fi
+
+if i2c probe 0x38 ; then
+ setenv bootargs $bootargs video=mxcfb${nextcon}:dev=ldb,1024x600M@60,if=RGB666
+ if test "0" -eq $nextcon; then
+ setenv fbmem "fbmem=10M";
+ else
+ setenv fbmem ${fbmem},10M
+ fi
+ setexpr nextcon $nextcon + 1
+else
+ echo "------ no 1024x600 display";
+fi
+
+if i2c probe 0x48 ; then
+ setenv bootargs $bootargs video=mxcfb${nextcon}:dev=lcd,CLAA-WVGA,if=RGB666
+ if test "0" -eq $nextcon; then
+ setenv fbmem "fbmem=10M";
+ else
+ setenv fbmem ${fbmem},10M
+ fi
+ setexpr nextcon $nextcon + 1
+else
+ echo "------ no 800x480 display";
+fi
+
+while test "3" -ne $nextcon ; do
+ setenv bootargs $bootargs video=mxcfb${nextcon}:off ;
+ setexpr nextcon $nextcon + 1 ;
+done
+
+setenv bootargs $bootargs $fbmem
+setenv bootargs "$bootargs console=ttymxc1,115200 vmalloc=400M consoleblank=0 rootwait"
+
+if test "sata" = "${dtype}" ; then
+ setenv bootargs "$bootargs root=/dev/sda1" ;
+else
+ setenv "bootargs $bootargs root=/dev/mmcblk0p1" ;
+fi
+${fs}load ${dtype} ${disk}:1 10800000 /boot/uImage && bootm 10800000 ;
+echo "Error loading kernel image"
diff --git a/board/boundary/nitrogen6x/6x_bootscript_android.txt b/board/boundary/nitrogen6x/6x_bootscript_android.txt
new file mode 100644
index 0000000..0982cf8
--- /dev/null
+++ b/board/boundary/nitrogen6x/6x_bootscript_android.txt
@@ -0,0 +1,64 @@
+${dtype} dev ${disk}
+
+setenv bootargs enable_wait_mode=off
+setenv nextcon 0;
+setenv bootargs $bootargs console=ttymxc1,115200 vmalloc=400M consoleblank=0 ;
+
+i2c dev 2
+
+if i2c probe 0x04 ; then
+ setenv bootargs $bootargs video=mxcfb${nextcon}:dev=ldb,LDB-XGA,if=RGB666
+ if test "0" -eq $nextcon; then
+ setenv fbcon "fbcon=10M";
+ else
+ setenv fbcon ${fbcon},10M
+ fi
+ setexpr nextcon $nextcon + 1
+else
+ echo "------ no Freescale display";
+fi
+
+if i2c probe 0x38 ; then
+ setenv bootargs $bootargs video=mxcfb${nextcon}:dev=ldb,1024x600M@60,if=RGB666
+ if test "0" -eq $nextcon; then
+ setenv fbcon "fbcon=10M";
+ else
+ setenv fbcon ${fbcon},10M
+ fi
+ setexpr nextcon $nextcon + 1
+else
+ echo "------ no 1024x600 display";
+fi
+
+if i2c probe 0x48 ; then
+ setenv bootargs $bootargs video=mxcfb${nextcon}:dev=lcd,CLAA-WVGA,if=RGB666 tsdev=tsc2004 calibration
+ if test "0" -eq $nextcon; then
+ setenv fbcon "fbcon=10M";
+ else
+ setenv fbcon ${fbcon},10M
+ fi
+ setexpr nextcon $nextcon + 1
+else
+ echo "------ no 800x480 display";
+fi
+
+if hdmidet ; then
+ setenv bootargs $bootargs video=mxcfb${nextcon}:dev=hdmi,1280x720M@60,if=RGB24
+ if test "0" -eq $nextcon; then
+ setenv fbcon "fbcon=28M";
+ else
+ setenv fbcon ${fbcon},28M
+ fi
+ setexpr nextcon $nextcon + 1
+else
+ echo "------ no HDMI monitor";
+fi
+
+while test "3" -ne $nextcon ; do
+ setenv bootargs $bootargs video=mxcfb${nextcon}:off ;
+ setexpr nextcon $nextcon + 1 ;
+done
+
+setenv bootargs $bootargs fbcon=$fbcon
+${fs}load ${dtype} ${disk}:1 10800000 uImage && ${fs}load ${dtype} ${disk}:1 12800000 uramdisk.img && bootm 10800000 12800000
+echo "Error loading kernel image"
diff --git a/board/boundary/nitrogen6x/6x_bootscript_android_recovery.txt b/board/boundary/nitrogen6x/6x_bootscript_android_recovery.txt
new file mode 100644
index 0000000..0982cf8
--- /dev/null
+++ b/board/boundary/nitrogen6x/6x_bootscript_android_recovery.txt
@@ -0,0 +1,64 @@
+${dtype} dev ${disk}
+
+setenv bootargs enable_wait_mode=off
+setenv nextcon 0;
+setenv bootargs $bootargs console=ttymxc1,115200 vmalloc=400M consoleblank=0 ;
+
+i2c dev 2
+
+if i2c probe 0x04 ; then
+ setenv bootargs $bootargs video=mxcfb${nextcon}:dev=ldb,LDB-XGA,if=RGB666
+ if test "0" -eq $nextcon; then
+ setenv fbcon "fbcon=10M";
+ else
+ setenv fbcon ${fbcon},10M
+ fi
+ setexpr nextcon $nextcon + 1
+else
+ echo "------ no Freescale display";
+fi
+
+if i2c probe 0x38 ; then
+ setenv bootargs $bootargs video=mxcfb${nextcon}:dev=ldb,1024x600M@60,if=RGB666
+ if test "0" -eq $nextcon; then
+ setenv fbcon "fbcon=10M";
+ else
+ setenv fbcon ${fbcon},10M
+ fi
+ setexpr nextcon $nextcon + 1
+else
+ echo "------ no 1024x600 display";
+fi
+
+if i2c probe 0x48 ; then
+ setenv bootargs $bootargs video=mxcfb${nextcon}:dev=lcd,CLAA-WVGA,if=RGB666 tsdev=tsc2004 calibration
+ if test "0" -eq $nextcon; then
+ setenv fbcon "fbcon=10M";
+ else
+ setenv fbcon ${fbcon},10M
+ fi
+ setexpr nextcon $nextcon + 1
+else
+ echo "------ no 800x480 display";
+fi
+
+if hdmidet ; then
+ setenv bootargs $bootargs video=mxcfb${nextcon}:dev=hdmi,1280x720M@60,if=RGB24
+ if test "0" -eq $nextcon; then
+ setenv fbcon "fbcon=28M";
+ else
+ setenv fbcon ${fbcon},28M
+ fi
+ setexpr nextcon $nextcon + 1
+else
+ echo "------ no HDMI monitor";
+fi
+
+while test "3" -ne $nextcon ; do
+ setenv bootargs $bootargs video=mxcfb${nextcon}:off ;
+ setexpr nextcon $nextcon + 1 ;
+done
+
+setenv bootargs $bootargs fbcon=$fbcon
+${fs}load ${dtype} ${disk}:1 10800000 uImage && ${fs}load ${dtype} ${disk}:1 12800000 uramdisk.img && bootm 10800000 12800000
+echo "Error loading kernel image"
diff --git a/board/boundary/nitrogen6x/6x_upgrade.txt b/board/boundary/nitrogen6x/6x_upgrade.txt
new file mode 100644
index 0000000..0d8e8e5
--- /dev/null
+++ b/board/boundary/nitrogen6x/6x_upgrade.txt
@@ -0,0 +1,45 @@
+setenv stdout serial,vga
+echo "check U-Boot" ;
+setenv offset 0x400
+if ${fs}load ${dtype} ${disk}:1 12000000 u-boot.imx || ${fs}load ${dtype} ${disk}:1 12000000 u-boot.nopadding ; then
+ echo "read $filesize bytes from SD card" ;
+ if sf probe || sf probe || \
+ sf probe 1 27000000 || sf probe 1 27000000 ; then
+ echo "probed SPI ROM" ;
+ if sf read 0x12400000 $offset $filesize ; then
+ if cmp.b 0x12000000 0x12400000 $filesize ; then
+ echo "------- U-Boot versions match" ;
+ else
+ echo "Need U-Boot upgrade" ;
+ echo "Program in 5 seconds" ;
+ for n in 5 4 3 2 1 ; do
+ echo $n ;
+ sleep 1 ;
+ done
+ echo "erasing" ;
+ sf erase 0 0x50000 ;
+ # two steps to prevent bricking
+ echo "programming" ;
+ sf write 0x12000000 $offset $filesize ;
+ echo "verifying" ;
+ if sf read 0x12400000 $offset $filesize ; then
+ if cmp.b 0x12000000 0x12400000 $filesize ; then
+ while echo "---- U-Boot upgraded. reset" ; do
+ sleep 120
+ done
+ else
+ echo "Read verification error" ;
+ fi
+ else
+ echo "Error re-reading EEPROM" ;
+ fi
+ fi
+ else
+ echo "Error reading boot loader from EEPROM" ;
+ fi
+ else
+ echo "Error initializing EEPROM" ;
+ fi ;
+else
+ echo "No U-Boot image found on SD card" ;
+fi
diff --git a/board/boundary/nitrogen6x/800mhz_2x128mx16.cfg b/board/boundary/nitrogen6x/800mhz_2x128mx16.cfg
new file mode 100644
index 0000000..de33e65
--- /dev/null
+++ b/board/boundary/nitrogen6x/800mhz_2x128mx16.cfg
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not write to the Free Software
+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+ * MA 02110-1301 USA
+ *
+ */
+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002D
+DATA 4, MX6_MMDC_P0_MDCFG0, 0x40435323
+DATA 4, MX6_MMDC_P0_MDCFG1, 0xB66E8D63
+DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB
+DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2
+DATA 4, MX6_MMDC_P0_MDOR, 0x00431023
+DATA 4, MX6_MMDC_P0_MDOTC, 0x00333030
+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556D
+DATA 4, MX6_MMDC_P0_MDASP, 0x00000017
+DATA 4, MX6_MMDC_P0_MDCTL, 0x83190000
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008032
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031
+DATA 4, MX6_MMDC_P0_MDSCR, 0x13208030
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040
+DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P0_MDREF, 0x00005800
+DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227
+DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227
+DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x42350231
+DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x42350231
+DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x021A0218
+DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x021A0218
+DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x4B4B4E49
+DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x4B4B4E49
+DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x3F3F3035
+DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x3F3F3035
+DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x0040003C
+DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x0032003E
+DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x0040003C
+DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x0032003E
+DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000
+DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006
diff --git a/board/boundary/nitrogen6x/800mhz_2x256mx16.cfg b/board/boundary/nitrogen6x/800mhz_2x256mx16.cfg
new file mode 100644
index 0000000..19707cf
--- /dev/null
+++ b/board/boundary/nitrogen6x/800mhz_2x256mx16.cfg
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not write to the Free Software
+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+ * MA 02110-1301 USA
+ *
+ */
+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002D
+DATA 4, MX6_MMDC_P0_MDCFG0, 0x696C5323
+DATA 4, MX6_MMDC_P0_MDCFG1, 0xB66E8D63
+DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB
+DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2
+DATA 4, MX6_MMDC_P0_MDOR, 0x006C1023
+DATA 4, MX6_MMDC_P0_MDOTC, 0x00333030
+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556D
+DATA 4, MX6_MMDC_P0_MDASP, 0x00000027
+DATA 4, MX6_MMDC_P0_MDCTL, 0x84190000
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008032
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031
+DATA 4, MX6_MMDC_P0_MDSCR, 0x13208030
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040
+DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P0_MDREF, 0x00007800
+DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227
+DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227
+DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x42350231
+DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x021A0218
+DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x42350231
+DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x021A0218
+DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x4B4B4E49
+DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x4B4B4E49
+DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x3F3F3035
+DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x3F3F3035
+DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x0040003C
+DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x0032003E
+DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x0040003C
+DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x0032003E
+DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000
+DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006
diff --git a/board/boundary/nitrogen6x/800mhz_4x128mx16.cfg b/board/boundary/nitrogen6x/800mhz_4x128mx16.cfg
new file mode 100644
index 0000000..dd6a423
--- /dev/null
+++ b/board/boundary/nitrogen6x/800mhz_4x128mx16.cfg
@@ -0,0 +1,57 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not write to the Free Software
+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+ * MA 02110-1301 USA
+ */
+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002D
+DATA 4, MX6_MMDC_P0_MDCFG0, 0x40435323
+DATA 4, MX6_MMDC_P0_MDCFG1, 0xB66E8D63
+DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB
+DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2
+DATA 4, MX6_MMDC_P0_MDOR, 0x00431023
+DATA 4, MX6_MMDC_P0_MDOTC, 0x00333030
+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556D
+DATA 4, MX6_MMDC_P0_MDASP, 0x00000027
+DATA 4, MX6_MMDC_P0_MDCTL, 0x831A0000
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008032
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031
+DATA 4, MX6_MMDC_P0_MDSCR, 0x13208030
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040
+DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P0_MDREF, 0x00005800
+DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227
+DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227
+DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x420F020F
+DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x01760175
+DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x41640171
+DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x015E0160
+DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x45464B4A
+DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x49484A46
+DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x40402E32
+DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x3A3A3231
+DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x003A003A
+DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x0030002F
+DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x002F0038
+DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x00270039
+DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000
+DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006
diff --git a/board/boundary/nitrogen6x/800mhz_4x256mx16.cfg b/board/boundary/nitrogen6x/800mhz_4x256mx16.cfg
new file mode 100644
index 0000000..d5d06e2
--- /dev/null
+++ b/board/boundary/nitrogen6x/800mhz_4x256mx16.cfg
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not write to the Free Software
+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+ * MA 02110-1301 USA
+ *
+ */
+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002D
+DATA 4, MX6_MMDC_P0_MDCFG0, 0x696C5323
+DATA 4, MX6_MMDC_P0_MDCFG1, 0xB66E8D63
+DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB
+DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2
+DATA 4, MX6_MMDC_P0_MDOR, 0x006C1023
+DATA 4, MX6_MMDC_P0_MDOTC, 0x00333030
+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556D
+DATA 4, MX6_MMDC_P0_MDASP, 0x00000047
+DATA 4, MX6_MMDC_P0_MDCTL, 0x841A0000
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008032
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031
+DATA 4, MX6_MMDC_P0_MDSCR, 0x13208030
+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040
+DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003
+DATA 4, MX6_MMDC_P0_MDREF, 0x00007800
+DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227
+DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227
+DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x42350231
+DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x021A0218
+DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x42350231
+DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x021A0218
+DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x4B4B4E49
+DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x4B4B4E49
+DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x3F3F3035
+DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x3F3F3035
+DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x0040003C
+DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x0032003E
+DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x0040003C
+DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x0032003E
+DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000
+DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006
diff --git a/board/boundary/nitrogen6x/Makefile b/board/boundary/nitrogen6x/Makefile
new file mode 100644
index 0000000..fe1e5e0
--- /dev/null
+++ b/board/boundary/nitrogen6x/Makefile
@@ -0,0 +1,41 @@
+#
+# Copyright (C) 2012-2013, Guennadi Liakhovetski <lg@denx.de>
+# (C) Copyright 2012-2013 Freescale Semiconductor, Inc.
+# Copyright (C) 2013, Boundary Devices <info@boundarydevices.com>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := nitrogen6x.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/boundary/nitrogen6x/README b/board/boundary/nitrogen6x/README
new file mode 100644
index 0000000..5049093
--- /dev/null
+++ b/board/boundary/nitrogen6x/README
@@ -0,0 +1,92 @@
+U-Boot for the Boundary Devices Nitrogen6X and
+Freescale i.MX6Q SabreLite boards
+
+This file contains information for the port of
+U-Boot to the Boundary Devices Nitrogen6X and
+Freescale i.MX6Q SabreLite boards.
+
+1. Boot source, boot from SPI NOR
+---------------------------------
+The configuration in this directory supports both the
+Nitrogen6X and Freescale SabreLite board, but in a
+different fashion from Freescale's implementation in
+board/freescale/mx6qsabrelite.
+
+In particular, this image supports booting from SPI NOR
+and saving the environment to SPI NOR.
+
+It does not support 'boot from SD' at offset 0x400
+except through the 'bmode' command.
+ http://lists.denx.de/pipermail/u-boot/2012-August/131151.html
+
+2. Boots using 6x_bootscript on SATA or SD card
+-----------------------------------------------
+The default bootcmd for these boards is configured
+to look for and source a boot script named '6x_bootscript'
+in the root of the first partition of the following
+devices:
+
+ sata 0
+ mmc 0
+ mmc 1
+
+They're searched in the order listed above, trying both the
+ext2 and fat filesystems.
+
+2. Maintaining the SPI NOR
+--------------------------
+A couple of convenience commands
+
+ clearenv - clear environment to factory default
+ upgradeu - look and source a boot script named
+ '6x_upgrade' to upgrade the U-Boot version
+ in SPI NOR. The search is the same as for
+ 6x_bootscript described above.
+
+3. Display support
+------------------
+U-Boot support for the following displays is configured by
+default:
+
+ HDMI - 1024 x 768 for maximum compatibility
+ Hannstar-XGA - 1024 x 768 LVDS (Freescale part number MCIMX-LVDS1)
+ wsvga-lvds - 1024 x 600 LVDS (Boundary p/n Nit6X_1024x600)
+ wvga-rgb - 800 x 480 RGB (Boundary p/n Nit6X_800x480)
+
+Since the ipuv3_fb display driver currently supports only a single display,
+this code auto-detects panel by probing the HDMI Phy for Hot Plug Detect
+or the I2C touch controller of the LVDS and RGB displays in the priority
+listed above.
+
+Setting 'panel' environment variable to one of the names above will
+override auto-detection and force activation of the specified panel.
+
+4. Building
+------------
+
+To build U-Boot for one of the Nitrogen6x or SabreLite board:
+
+ make nitrogen6x_config
+ make u-boot.imx
+
+Note that 'nitrogen6x' is a placeholder. The complete list of supported
+board configurations is shown in tha MAINTAINERS file:
+ nitrogen6q i.MX6Q/6D 1GB
+ nitrogen6dl i.MX6DL 1GB
+ nitrogen6s i.MX6S 512MB
+ nitrogen6q2g i.MX6Q/6D 2GB
+ nitrogen6dl2g i.MX6DL 2GB
+ nitrogen6s1g i.MX6S 1GB
+
+The -6q variants support either the i.MX6Quad or i.MX6Dual processors
+and are configured for a 64-bit memory bus at 1066 MHz.
+
+The -6dl variants also use a 64-bit memory bus, operated at 800MHz.
+
+The -6s variants use a 32-bit memory bus at 800MHz.
+
+If you place the u-boot.imx into a single-partition SD card
+along with a binary version of the boot script 6x_upgrade.txt,
+you can program it using 'upgradeu':
+
+ U-Boot> run upgradeu
diff --git a/board/boundary/nitrogen6x/clocks.cfg b/board/boundary/nitrogen6x/clocks.cfg
new file mode 100644
index 0000000..e7d1f86
--- /dev/null
+++ b/board/boundary/nitrogen6x/clocks.cfg
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not write to the Free Software
+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+ * MA 02110-1301 USA
+ *
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+ */
+
+/* set the default clock gate to save power */
+DATA 4, CCM_CCGR0, 0x00C03F3F
+DATA 4, CCM_CCGR1, 0x0030FC03
+DATA 4, CCM_CCGR2, 0x0FFFC000
+DATA 4, CCM_CCGR3, 0x3FF00000
+DATA 4, CCM_CCGR4, 0x00FFF300
+DATA 4, CCM_CCGR5, 0x0F0000C3
+DATA 4, CCM_CCGR6, 0x000003FF
+
+/* enable AXI cache for VDOA/VPU/IPU */
+DATA 4, MX6_IOMUXC_GPR4, 0xF00000CF
+/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
+DATA 4, MX6_IOMUXC_GPR6, 0x007F007F
+DATA 4, MX6_IOMUXC_GPR7, 0x007F007F
diff --git a/board/boundary/nitrogen6x/ddr-setup.cfg b/board/boundary/nitrogen6x/ddr-setup.cfg
new file mode 100644
index 0000000..c315812
--- /dev/null
+++ b/board/boundary/nitrogen6x/ddr-setup.cfg
@@ -0,0 +1,112 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not write to the Free Software
+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+ * MA 02110-1301 USA
+ *
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+ */
+
+/*
+ * DDR3 settings
+ * MX6Q ddr is limited to 1066 Mhz currently 1056 MHz(528 MHz clock),
+ * memory bus width: 64 bits x16/x32/x64
+ * MX6DL ddr is limited to 800 MHz(400 MHz clock)
+ * memory bus width: 64 bits x16/x32/x64
+ * MX6SOLO ddr is limited to 800 MHz(400 MHz clock)
+ * memory bus width: 32 bits x16/x32
+ */
+DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000030
+DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000030
+
+DATA 4, MX6_IOM_GRP_B0DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B1DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B2DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B3DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B4DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B5DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B6DS, 0x00000030
+DATA 4, MX6_IOM_GRP_B7DS, 0x00000030
+DATA 4, MX6_IOM_GRP_ADDDS, 0x00000030
+/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
+DATA 4, MX6_IOM_GRP_CTLDS, 0x00000030
+
+DATA 4, MX6_IOM_DRAM_DQM0, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM1, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM2, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM3, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM4, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM5, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM6, 0x00020030
+DATA 4, MX6_IOM_DRAM_DQM7, 0x00020030
+
+DATA 4, MX6_IOM_DRAM_CAS, 0x00020030
+DATA 4, MX6_IOM_DRAM_RAS, 0x00020030
+DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00020030
+DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00020030
+
+DATA 4, MX6_IOM_DRAM_RESET, 0x000e0030
+DATA 4, MX6_IOM_DRAM_SDCKE0, 0x00003000
+DATA 4, MX6_IOM_DRAM_SDCKE1, 0x00003000
+
+DATA 4, MX6_IOM_DRAM_SDODT0, 0x00003030
+DATA 4, MX6_IOM_DRAM_SDODT1, 0x00003030
+
+/* (differential input) */
+DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000
+/* (differential input) */
+DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000
+/* disable ddr pullups */
+DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000
+DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000
+/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
+DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000
+
+/* Read data DQ Byte0-3 delay */
+DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333
+DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333
+DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333
+DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333
+DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333
+DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333
+DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333
+DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333
+
+/*
+ * MDMISC mirroring interleaved (row/bank/col)
+ */
+DATA 4, MX6_MMDC_P0_MDMISC, 0x00081740
+
+/*
+ * MDSCR con_req
+ */
+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000
diff --git a/board/boundary/nitrogen6x/nitrogen6dl.cfg b/board/boundary/nitrogen6x/nitrogen6dl.cfg
new file mode 100644
index 0000000..d6da96c
--- /dev/null
+++ b/board/boundary/nitrogen6x/nitrogen6dl.cfg
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not write to the Free Software
+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+ * MA 02110-1301 USA
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+/* image version */
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+BOOT_FROM sd
+
+#define __ASSEMBLY__
+#include <config.h>
+#include "asm/arch/mx6-ddr.h"
+#include "asm/arch/iomux.h"
+#include "asm/arch/crm_regs.h"
+
+#include "ddr-setup.cfg"
+#include "800mhz_4x128mx16.cfg"
+#include "clocks.cfg"
diff --git a/board/boundary/nitrogen6x/nitrogen6dl2g.cfg b/board/boundary/nitrogen6x/nitrogen6dl2g.cfg
new file mode 100644
index 0000000..0b1c35c
--- /dev/null
+++ b/board/boundary/nitrogen6x/nitrogen6dl2g.cfg
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not write to the Free Software
+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+ * MA 02110-1301 USA
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+/* image version */
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+BOOT_FROM sd
+
+#define __ASSEMBLY__
+#include <config.h>
+#include "asm/arch/mx6-ddr.h"
+#include "asm/arch/iomux.h"
+#include "asm/arch/crm_regs.h"
+
+#include "ddr-setup.cfg"
+#include "800mhz_4x256mx16.cfg"
+#include "clocks.cfg"
diff --git a/board/boundary/nitrogen6x/nitrogen6q.cfg b/board/boundary/nitrogen6x/nitrogen6q.cfg
new file mode 100644
index 0000000..680a853
--- /dev/null
+++ b/board/boundary/nitrogen6x/nitrogen6q.cfg
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not write to the Free Software
+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+ * MA 02110-1301 USA
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+/* image version */
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+BOOT_FROM sd
+
+#define __ASSEMBLY__
+#include <config.h>
+#include "asm/arch/mx6-ddr.h"
+#include "asm/arch/iomux.h"
+#include "asm/arch/crm_regs.h"
+
+#include "ddr-setup.cfg"
+#include "1066mhz_4x128mx16.cfg"
+#include "clocks.cfg"
diff --git a/board/boundary/nitrogen6x/nitrogen6q2g.cfg b/board/boundary/nitrogen6x/nitrogen6q2g.cfg
new file mode 100644
index 0000000..f57ab0e
--- /dev/null
+++ b/board/boundary/nitrogen6x/nitrogen6q2g.cfg
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not write to the Free Software
+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+ * MA 02110-1301 USA
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+/* image version */
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+BOOT_FROM sd
+
+#define __ASSEMBLY__
+#include <config.h>
+#include "asm/arch/mx6-ddr.h"
+#include "asm/arch/iomux.h"
+#include "asm/arch/crm_regs.h"
+
+#include "ddr-setup.cfg"
+#include "1066mhz_4x256mx16.cfg"
+#include "clocks.cfg"
diff --git a/board/boundary/nitrogen6x/nitrogen6s.cfg b/board/boundary/nitrogen6x/nitrogen6s.cfg
new file mode 100644
index 0000000..b5af5cc
--- /dev/null
+++ b/board/boundary/nitrogen6x/nitrogen6s.cfg
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not write to the Free Software
+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+ * MA 02110-1301 USA
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+/* image version */
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+BOOT_FROM sd
+
+#define __ASSEMBLY__
+#include <config.h>
+#include "asm/arch/mx6-ddr.h"
+#include "asm/arch/iomux.h"
+#include "asm/arch/crm_regs.h"
+
+#include "ddr-setup.cfg"
+#include "800mhz_2x128mx16.cfg"
+#include "clocks.cfg"
diff --git a/board/boundary/nitrogen6x/nitrogen6s1g.cfg b/board/boundary/nitrogen6x/nitrogen6s1g.cfg
new file mode 100644
index 0000000..5aeefc8
--- /dev/null
+++ b/board/boundary/nitrogen6x/nitrogen6s1g.cfg
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not write to the Free Software
+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+ * MA 02110-1301 USA
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+/* image version */
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+BOOT_FROM sd
+
+#define __ASSEMBLY__
+#include <config.h>
+#include "asm/arch/mx6-ddr.h"
+#include "asm/arch/iomux.h"
+#include "asm/arch/crm_regs.h"
+
+#include "ddr-setup.cfg"
+#include "800mhz_2x256mx16.cfg"
+#include "clocks.cfg"
diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c
new file mode 100644
index 0000000..229c237
--- /dev/null
+++ b/board/boundary/nitrogen6x/nitrogen6x.c
@@ -0,0 +1,895 @@
+/*
+ * Copyright (C) 2010-2013 Freescale Semiconductor, Inc.
+ * Copyright (C) 2013, Boundary Devices <info@boundarydevices.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/sys_proto.h>
+#include <malloc.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/errno.h>
+#include <asm/gpio.h>
+#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/mxc_i2c.h>
+#include <asm/imx-common/boot_mode.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+#include <micrel.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <linux/fb.h>
+#include <ipu_pixfmt.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/mxc_hdmi.h>
+#include <i2c.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
+ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+#define ENET_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
+
+#define SPI_PAD_CTRL (PAD_CTL_HYS | \
+ PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
+
+#define BUTTON_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
+
+#define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
+ PAD_CTL_ODE | PAD_CTL_SRE_FAST)
+
+#define WEAK_PULLUP (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
+ PAD_CTL_SRE_SLOW)
+
+#define WEAK_PULLDOWN (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
+ PAD_CTL_SRE_SLOW)
+
+#define OUTPUT_40OHM (PAD_CTL_SPEED_MED|PAD_CTL_DSE_40ohm)
+
+int dram_init(void)
+{
+ gd->ram_size = ((ulong)CONFIG_DDR_MB * 1024 * 1024);
+
+ return 0;
+}
+
+iomux_v3_cfg_t const uart1_pads[] = {
+ MX6_PAD_SD3_DAT6__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_SD3_DAT7__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+iomux_v3_cfg_t const uart2_pads[] = {
+ MX6_PAD_EIM_D26__UART2_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_EIM_D27__UART2_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
+
+/* I2C1, SGTL5000 */
+struct i2c_pads_info i2c_pad_info0 = {
+ .scl = {
+ .i2c_mode = MX6_PAD_EIM_D21__I2C1_SCL | PC,
+ .gpio_mode = MX6_PAD_EIM_D21__GPIO_3_21 | PC,
+ .gp = IMX_GPIO_NR(3, 21)
+ },
+ .sda = {
+ .i2c_mode = MX6_PAD_EIM_D28__I2C1_SDA | PC,
+ .gpio_mode = MX6_PAD_EIM_D28__GPIO_3_28 | PC,
+ .gp = IMX_GPIO_NR(3, 28)
+ }
+};
+
+/* I2C2 Camera, MIPI */
+struct i2c_pads_info i2c_pad_info1 = {
+ .scl = {
+ .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | PC,
+ .gpio_mode = MX6_PAD_KEY_COL3__GPIO_4_12 | PC,
+ .gp = IMX_GPIO_NR(4, 12)
+ },
+ .sda = {
+ .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | PC,
+ .gpio_mode = MX6_PAD_KEY_ROW3__GPIO_4_13 | PC,
+ .gp = IMX_GPIO_NR(4, 13)
+ }
+};
+
+/* I2C3, J15 - RGB connector */
+struct i2c_pads_info i2c_pad_info2 = {
+ .scl = {
+ .i2c_mode = MX6_PAD_GPIO_5__I2C3_SCL | PC,
+ .gpio_mode = MX6_PAD_GPIO_5__GPIO_1_5 | PC,
+ .gp = IMX_GPIO_NR(1, 5)
+ },
+ .sda = {
+ .i2c_mode = MX6_PAD_GPIO_16__I2C3_SDA | PC,
+ .gpio_mode = MX6_PAD_GPIO_16__GPIO_7_11 | PC,
+ .gp = IMX_GPIO_NR(7, 11)
+ }
+};
+
+iomux_v3_cfg_t const usdhc3_pads[] = {
+ MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT5__GPIO_7_0 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
+};
+
+iomux_v3_cfg_t const usdhc4_pads[] = {
+ MX6_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT1__USDHC4_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT2__USDHC4_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT3__USDHC4_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NANDF_D6__GPIO_2_6 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
+};
+
+iomux_v3_cfg_t const enet_pads1[] = {
+ MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ /* pin 35 - 1 (PHY_AD2) on reset */
+ MX6_PAD_RGMII_RXC__GPIO_6_30 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* pin 32 - 1 - (MODE0) all */
+ MX6_PAD_RGMII_RD0__GPIO_6_25 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* pin 31 - 1 - (MODE1) all */
+ MX6_PAD_RGMII_RD1__GPIO_6_27 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* pin 28 - 1 - (MODE2) all */
+ MX6_PAD_RGMII_RD2__GPIO_6_28 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* pin 27 - 1 - (MODE3) all */
+ MX6_PAD_RGMII_RD3__GPIO_6_29 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* pin 33 - 1 - (CLK125_EN) 125Mhz clockout enabled */
+ MX6_PAD_RGMII_RX_CTL__GPIO_6_24 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* pin 42 PHY nRST */
+ MX6_PAD_EIM_D23__GPIO_3_23 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_ENET_RXD0__GPIO_1_27 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+iomux_v3_cfg_t const enet_pads2[] = {
+ MX6_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD2__ENET_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD3__ENET_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
+};
+
+/* wl1271 pads on nitrogen6x */
+iomux_v3_cfg_t const wl12xx_pads[] = {
+ (MX6_PAD_NANDF_CS1__GPIO_6_14 & ~MUX_PAD_CTRL_MASK)
+ | MUX_PAD_CTRL(WEAK_PULLDOWN),
+ (MX6_PAD_NANDF_CS2__GPIO_6_15 & ~MUX_PAD_CTRL_MASK)
+ | MUX_PAD_CTRL(OUTPUT_40OHM),
+ (MX6_PAD_NANDF_CS3__GPIO_6_16 & ~MUX_PAD_CTRL_MASK)
+ | MUX_PAD_CTRL(OUTPUT_40OHM),
+};
+#define WL12XX_WL_IRQ_GP IMX_GPIO_NR(6, 14)
+#define WL12XX_WL_ENABLE_GP IMX_GPIO_NR(6, 15)
+#define WL12XX_BT_ENABLE_GP IMX_GPIO_NR(6, 16)
+
+/* Button assignments for J14 */
+static iomux_v3_cfg_t const button_pads[] = {
+ /* Menu */
+ MX6_PAD_NANDF_D1__GPIO_2_1 | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
+ /* Back */
+ MX6_PAD_NANDF_D2__GPIO_2_2 | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
+ /* Labelled Search (mapped to Power under Android) */
+ MX6_PAD_NANDF_D3__GPIO_2_3 | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
+ /* Home */
+ MX6_PAD_NANDF_D4__GPIO_2_4 | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
+ /* Volume Down */
+ MX6_PAD_GPIO_19__GPIO_4_5 | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
+ /* Volume Up */
+ MX6_PAD_GPIO_18__GPIO_7_13 | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
+};
+
+static void setup_iomux_enet(void)
+{
+ gpio_direction_output(IMX_GPIO_NR(3, 23), 0); /* SABRE Lite PHY rst */
+ gpio_direction_output(IMX_GPIO_NR(1, 27), 0); /* Nitrogen6X PHY rst */
+ gpio_direction_output(IMX_GPIO_NR(6, 30), 1);
+ gpio_direction_output(IMX_GPIO_NR(6, 25), 1);
+ gpio_direction_output(IMX_GPIO_NR(6, 27), 1);
+ gpio_direction_output(IMX_GPIO_NR(6, 28), 1);
+ gpio_direction_output(IMX_GPIO_NR(6, 29), 1);
+ imx_iomux_v3_setup_multiple_pads(enet_pads1, ARRAY_SIZE(enet_pads1));
+ gpio_direction_output(IMX_GPIO_NR(6, 24), 1);
+
+ /* Need delay 10ms according to KSZ9021 spec */
+ udelay(1000 * 10);
+ gpio_set_value(IMX_GPIO_NR(3, 23), 1); /* SABRE Lite PHY reset */
+ gpio_set_value(IMX_GPIO_NR(1, 27), 1); /* Nitrogen6X PHY reset */
+
+ imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2));
+}
+
+iomux_v3_cfg_t const usb_pads[] = {
+ MX6_PAD_GPIO_17__GPIO_7_12 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+static void setup_iomux_uart(void)
+{
+ imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
+ imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
+}
+
+#ifdef CONFIG_USB_EHCI_MX6
+int board_ehci_hcd_init(int port)
+{
+ imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads));
+
+ /* Reset USB hub */
+ gpio_direction_output(IMX_GPIO_NR(7, 12), 0);
+ mdelay(2);
+ gpio_set_value(IMX_GPIO_NR(7, 12), 1);
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_FSL_ESDHC
+struct fsl_esdhc_cfg usdhc_cfg[2] = {
+ {USDHC3_BASE_ADDR},
+ {USDHC4_BASE_ADDR},
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ int ret;
+
+ if (cfg->esdhc_base == USDHC3_BASE_ADDR) {
+ gpio_direction_input(IMX_GPIO_NR(7, 0));
+ ret = !gpio_get_value(IMX_GPIO_NR(7, 0));
+ } else {
+ gpio_direction_input(IMX_GPIO_NR(2, 6));
+ ret = !gpio_get_value(IMX_GPIO_NR(2, 6));
+ }
+
+ return ret;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ s32 status = 0;
+ u32 index = 0;
+
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+ usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
+
+ for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) {
+ switch (index) {
+ case 0:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+ break;
+ case 1:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
+ break;
+ default:
+ printf("Warning: you configured more USDHC controllers"
+ "(%d) then supported by the board (%d)\n",
+ index + 1, CONFIG_SYS_FSL_USDHC_NUM);
+ return status;
+ }
+
+ status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
+ }
+
+ return status;
+}
+#endif
+
+u32 get_board_rev(void)
+{
+ return 0x63000;
+}
+
+#ifdef CONFIG_MXC_SPI
+iomux_v3_cfg_t const ecspi1_pads[] = {
+ /* SS1 */
+ MX6_PAD_EIM_D19__GPIO_3_19 | MUX_PAD_CTRL(SPI_PAD_CTRL),
+ MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
+ MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
+ MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
+};
+
+void setup_spi(void)
+{
+ gpio_direction_output(CONFIG_SF_DEFAULT_CS, 1);
+ imx_iomux_v3_setup_multiple_pads(ecspi1_pads,
+ ARRAY_SIZE(ecspi1_pads));
+}
+#endif
+
+int board_phy_config(struct phy_device *phydev)
+{
+ /* min rx data delay */
+ ksz9021_phy_extended_write(phydev,
+ MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, 0x0);
+ /* min tx data delay */
+ ksz9021_phy_extended_write(phydev,
+ MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, 0x0);
+ /* max rx/tx clock delay, min rx/tx control */
+ ksz9021_phy_extended_write(phydev,
+ MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, 0xf0f0);
+ if (phydev->drv->config)
+ phydev->drv->config(phydev);
+
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ uint32_t base = IMX_FEC_BASE;
+ struct mii_dev *bus = NULL;
+ struct phy_device *phydev = NULL;
+ int ret;
+
+ setup_iomux_enet();
+
+#ifdef CONFIG_FEC_MXC
+ bus = fec_get_miibus(base, -1);
+ if (!bus)
+ return 0;
+ /* scan phy 4,5,6,7 */
+ phydev = phy_find_by_mask(bus, (0xf << 4), PHY_INTERFACE_MODE_RGMII);
+ if (!phydev) {
+ free(bus);
+ return 0;
+ }
+ printf("using phy at %d\n", phydev->addr);
+ ret = fec_probe(bis, -1, base, bus, phydev);
+ if (ret) {
+ printf("FEC MXC: %s:failed\n", __func__);
+ free(phydev);
+ free(bus);
+ }
+#endif
+ return 0;
+}
+
+static void setup_buttons(void)
+{
+ imx_iomux_v3_setup_multiple_pads(button_pads,
+ ARRAY_SIZE(button_pads));
+}
+
+#ifdef CONFIG_CMD_SATA
+
+int setup_sata(void)
+{
+ struct iomuxc_base_regs *const iomuxc_regs
+ = (struct iomuxc_base_regs *) IOMUXC_BASE_ADDR;
+ int ret = enable_sata_clock();
+ if (ret)
+ return ret;
+
+ clrsetbits_le32(&iomuxc_regs->gpr[13],
+ IOMUXC_GPR13_SATA_MASK,
+ IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P0DB
+ |IOMUXC_GPR13_SATA_PHY_7_SATA2M
+ |IOMUXC_GPR13_SATA_SPEED_3G
+ |(3<<IOMUXC_GPR13_SATA_PHY_6_SHIFT)
+ |IOMUXC_GPR13_SATA_SATA_PHY_5_SS_DISABLED
+ |IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_9_16
+ |IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P00_DB
+ |IOMUXC_GPR13_SATA_PHY_2_TX_1P104V
+ |IOMUXC_GPR13_SATA_PHY_1_SLOW);
+
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_VIDEO_IPUV3)
+
+static iomux_v3_cfg_t const backlight_pads[] = {
+ /* Backlight on RGB connector: J15 */
+ MX6_PAD_SD1_DAT3__GPIO_1_21 | MUX_PAD_CTRL(NO_PAD_CTRL),
+#define RGB_BACKLIGHT_GP IMX_GPIO_NR(1, 21)
+
+ /* Backlight on LVDS connector: J6 */
+ MX6_PAD_SD1_CMD__GPIO_1_18 | MUX_PAD_CTRL(NO_PAD_CTRL),
+#define LVDS_BACKLIGHT_GP IMX_GPIO_NR(1, 18)
+};
+
+static iomux_v3_cfg_t const rgb_pads[] = {
+ MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK,
+ MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15,
+ MX6_PAD_DI0_PIN2__IPU1_DI0_PIN2,
+ MX6_PAD_DI0_PIN3__IPU1_DI0_PIN3,
+ MX6_PAD_DI0_PIN4__GPIO_4_20,
+ MX6_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0,
+ MX6_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1,
+ MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2,
+ MX6_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3,
+ MX6_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4,
+ MX6_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5,
+ MX6_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6,
+ MX6_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7,
+ MX6_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8,
+ MX6_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9,
+ MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10,
+ MX6_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11,
+ MX6_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12,
+ MX6_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13,
+ MX6_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14,
+ MX6_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15,
+ MX6_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16,
+ MX6_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17,
+ MX6_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18,
+ MX6_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19,
+ MX6_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20,
+ MX6_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21,
+ MX6_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22,
+ MX6_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23,
+};
+
+struct display_info_t {
+ int bus;
+ int addr;
+ int pixfmt;
+ int (*detect)(struct display_info_t const *dev);
+ void (*enable)(struct display_info_t const *dev);
+ struct fb_videomode mode;
+};
+
+
+static int detect_hdmi(struct display_info_t const *dev)
+{
+ struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
+ return readb(&hdmi->phy_stat0) & HDMI_PHY_HPD;
+}
+
+static void enable_hdmi(struct display_info_t const *dev)
+{
+ struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
+ u8 reg;
+ printf("%s: setup HDMI monitor\n", __func__);
+ reg = readb(&hdmi->phy_conf0);
+ reg |= HDMI_PHY_CONF0_PDZ_MASK;
+ writeb(reg, &hdmi->phy_conf0);
+
+ udelay(3000);
+ reg |= HDMI_PHY_CONF0_ENTMDS_MASK;
+ writeb(reg, &hdmi->phy_conf0);
+ udelay(3000);
+ reg |= HDMI_PHY_CONF0_GEN2_TXPWRON_MASK;
+ writeb(reg, &hdmi->phy_conf0);
+ writeb(HDMI_MC_PHYRSTZ_ASSERT, &hdmi->mc_phyrstz);
+}
+
+static int detect_i2c(struct display_info_t const *dev)
+{
+ return ((0 == i2c_set_bus_num(dev->bus))
+ &&
+ (0 == i2c_probe(dev->addr)));
+}
+
+static void enable_lvds(struct display_info_t const *dev)
+{
+ struct iomuxc *iomux = (struct iomuxc *)
+ IOMUXC_BASE_ADDR;
+ u32 reg = readl(&iomux->gpr[2]);
+ reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT;
+ writel(reg, &iomux->gpr[2]);
+ gpio_direction_output(LVDS_BACKLIGHT_GP, 1);
+}
+
+static void enable_rgb(struct display_info_t const *dev)
+{
+ imx_iomux_v3_setup_multiple_pads(
+ rgb_pads,
+ ARRAY_SIZE(rgb_pads));
+ gpio_direction_output(RGB_BACKLIGHT_GP, 1);
+}
+
+static struct display_info_t const displays[] = {{
+ .bus = -1,
+ .addr = 0,
+ .pixfmt = IPU_PIX_FMT_RGB24,
+ .detect = detect_hdmi,
+ .enable = enable_hdmi,
+ .mode = {
+ .name = "HDMI",
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 15385,
+ .left_margin = 220,
+ .right_margin = 40,
+ .upper_margin = 21,
+ .lower_margin = 7,
+ .hsync_len = 60,
+ .vsync_len = 10,
+ .sync = FB_SYNC_EXT,
+ .vmode = FB_VMODE_NONINTERLACED
+} }, {
+ .bus = 2,
+ .addr = 0x4,
+ .pixfmt = IPU_PIX_FMT_LVDS666,
+ .detect = detect_i2c,
+ .enable = enable_lvds,
+ .mode = {
+ .name = "Hannstar-XGA",
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 15385,
+ .left_margin = 220,
+ .right_margin = 40,
+ .upper_margin = 21,
+ .lower_margin = 7,
+ .hsync_len = 60,
+ .vsync_len = 10,
+ .sync = FB_SYNC_EXT,
+ .vmode = FB_VMODE_NONINTERLACED
+} }, {
+ .bus = 2,
+ .addr = 0x38,
+ .pixfmt = IPU_PIX_FMT_LVDS666,
+ .detect = detect_i2c,
+ .enable = enable_lvds,
+ .mode = {
+ .name = "wsvga-lvds",
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 600,
+ .pixclock = 15385,
+ .left_margin = 220,
+ .right_margin = 40,
+ .upper_margin = 21,
+ .lower_margin = 7,
+ .hsync_len = 60,
+ .vsync_len = 10,
+ .sync = FB_SYNC_EXT,
+ .vmode = FB_VMODE_NONINTERLACED
+} }, {
+ .bus = 2,
+ .addr = 0x48,
+ .pixfmt = IPU_PIX_FMT_RGB666,
+ .detect = detect_i2c,
+ .enable = enable_rgb,
+ .mode = {
+ .name = "wvga-rgb",
+ .refresh = 57,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = 37037,
+ .left_margin = 40,
+ .right_margin = 60,
+ .upper_margin = 10,
+ .lower_margin = 10,
+ .hsync_len = 20,
+ .vsync_len = 10,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED
+} } };
+
+int board_video_skip(void)
+{
+ int i;
+ int ret;
+ char const *panel = getenv("panel");
+ if (!panel) {
+ for (i = 0; i < ARRAY_SIZE(displays); i++) {
+ struct display_info_t const *dev = displays+i;
+ if (dev->detect(dev)) {
+ panel = dev->mode.name;
+ printf("auto-detected panel %s\n", panel);
+ break;
+ }
+ }
+ if (!panel) {
+ panel = displays[0].mode.name;
+ printf("No panel detected: default to %s\n", panel);
+ }
+ } else {
+ for (i = 0; i < ARRAY_SIZE(displays); i++) {
+ if (!strcmp(panel, displays[i].mode.name))
+ break;
+ }
+ }
+ if (i < ARRAY_SIZE(displays)) {
+ ret = ipuv3_fb_init(&displays[i].mode, 0,
+ displays[i].pixfmt);
+ if (!ret) {
+ displays[i].enable(displays+i);
+ printf("Display: %s (%ux%u)\n",
+ displays[i].mode.name,
+ displays[i].mode.xres,
+ displays[i].mode.yres);
+ } else
+ printf("LCD %s cannot be configured: %d\n",
+ displays[i].mode.name, ret);
+ } else {
+ printf("unsupported panel %s\n", panel);
+ ret = -EINVAL;
+ }
+ return (0 != ret);
+}
+
+static void setup_display(void)
+{
+ struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+ struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
+ struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
+ struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
+
+ int reg;
+
+ /* Turn on LDB0,IPU,IPU DI0 clocks */
+ reg = __raw_readl(&mxc_ccm->CCGR3);
+ reg |= MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET
+ |MXC_CCM_CCGR3_LDB_DI0_MASK;
+ writel(reg, &mxc_ccm->CCGR3);
+
+ /* Turn on HDMI PHY clock */
+ reg = __raw_readl(&mxc_ccm->CCGR2);
+ reg |= MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_MASK
+ |MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_MASK;
+ writel(reg, &mxc_ccm->CCGR2);
+
+ /* clear HDMI PHY reset */
+ writeb(HDMI_MC_PHYRSTZ_DEASSERT, &hdmi->mc_phyrstz);
+
+ /* set PFD1_FRAC to 0x13 == 455 MHz (480*18)/0x13 */
+ writel(ANATOP_PFD_480_PFD1_FRAC_MASK, &anatop->pfd_480_clr);
+ writel(0x13<<ANATOP_PFD_480_PFD1_FRAC_SHIFT, &anatop->pfd_480_set);
+
+ /* set LDB0, LDB1 clk select to 011/011 */
+ reg = readl(&mxc_ccm->cs2cdr);
+ reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
+ |MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
+ reg |= (3<<MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)
+ |(3<<MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
+ writel(reg, &mxc_ccm->cs2cdr);
+
+ reg = readl(&mxc_ccm->cscmr2);
+ reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV;
+ writel(reg, &mxc_ccm->cscmr2);
+
+ reg = readl(&mxc_ccm->chsccdr);
+ reg &= ~(MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_MASK
+ |MXC_CCM_CHSCCDR_IPU1_DI0_PODF_MASK
+ |MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK);
+ reg |= (CHSCCDR_CLK_SEL_LDB_DI0
+ <<MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET)
+ |(CHSCCDR_PODF_DIVIDE_BY_3
+ <<MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET)
+ |(CHSCCDR_IPU_PRE_CLK_540M_PFD
+ <<MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_OFFSET);
+ writel(reg, &mxc_ccm->chsccdr);
+
+ reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
+ |IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH
+ |IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW
+ |IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG
+ |IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT
+ |IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
+ |IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT
+ |IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED
+ |IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
+ writel(reg, &iomux->gpr[2]);
+
+ reg = readl(&iomux->gpr[3]);
+ reg = (reg & ~IOMUXC_GPR3_LVDS0_MUX_CTL_MASK)
+ | (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
+ <<IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
+ writel(reg, &iomux->gpr[3]);
+
+ /* backlights off until needed */
+ imx_iomux_v3_setup_multiple_pads(backlight_pads,
+ ARRAY_SIZE(backlight_pads));
+ gpio_direction_input(LVDS_BACKLIGHT_GP);
+ gpio_direction_input(RGB_BACKLIGHT_GP);
+}
+#endif
+
+int board_early_init_f(void)
+{
+ setup_iomux_uart();
+
+ /* Disable wl1271 For Nitrogen6w */
+ gpio_direction_input(WL12XX_WL_IRQ_GP);
+ gpio_direction_output(WL12XX_WL_ENABLE_GP, 0);
+ gpio_direction_output(WL12XX_BT_ENABLE_GP, 0);
+
+ imx_iomux_v3_setup_multiple_pads(wl12xx_pads, ARRAY_SIZE(wl12xx_pads));
+ setup_buttons();
+
+#if defined(CONFIG_VIDEO_IPUV3)
+ setup_display();
+#endif
+ return 0;
+}
+
+/*
+ * Do not overwrite the console
+ * Use always serial for U-Boot console
+ */
+int overwrite_console(void)
+{
+ return 1;
+}
+
+int board_init(void)
+{
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+#ifdef CONFIG_MXC_SPI
+ setup_spi();
+#endif
+ setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0);
+ setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
+ setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
+
+#ifdef CONFIG_CMD_SATA
+ setup_sata();
+#endif
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ if (gpio_get_value(WL12XX_WL_IRQ_GP))
+ puts("Board: Nitrogen6X\n");
+ else
+ puts("Board: SABRE Lite\n");
+
+ return 0;
+}
+
+struct button_key {
+ char const *name;
+ unsigned gpnum;
+ char ident;
+};
+
+static struct button_key const buttons[] = {
+ {"back", IMX_GPIO_NR(2, 2), 'B'},
+ {"home", IMX_GPIO_NR(2, 4), 'H'},
+ {"menu", IMX_GPIO_NR(2, 1), 'M'},
+ {"search", IMX_GPIO_NR(2, 3), 'S'},
+ {"volup", IMX_GPIO_NR(7, 13), 'V'},
+ {"voldown", IMX_GPIO_NR(4, 5), 'v'},
+};
+
+/*
+ * generate a null-terminated string containing the buttons pressed
+ * returns number of keys pressed
+ */
+static int read_keys(char *buf)
+{
+ int i, numpressed = 0;
+ for (i = 0; i < ARRAY_SIZE(buttons); i++) {
+ if (!gpio_get_value(buttons[i].gpnum))
+ buf[numpressed++] = buttons[i].ident;
+ }
+ buf[numpressed] = '\0';
+ return numpressed;
+}
+
+static int do_kbd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ char envvalue[ARRAY_SIZE(buttons)+1];
+ int numpressed = read_keys(envvalue);
+ setenv("keybd", envvalue);
+ return numpressed == 0;
+}
+
+U_BOOT_CMD(
+ kbd, 1, 1, do_kbd,
+ "Tests for keypresses, sets 'keybd' environment variable",
+ "Returns 0 (true) to shell if key is pressed."
+);
+
+#ifdef CONFIG_PREBOOT
+static char const kbd_magic_prefix[] = "key_magic";
+static char const kbd_command_prefix[] = "key_cmd";
+
+static void preboot_keys(void)
+{
+ int numpressed;
+ char keypress[ARRAY_SIZE(buttons)+1];
+ numpressed = read_keys(keypress);
+ if (numpressed) {
+ char *kbd_magic_keys = getenv("magic_keys");
+ char *suffix;
+ /*
+ * loop over all magic keys
+ */
+ for (suffix = kbd_magic_keys; *suffix; ++suffix) {
+ char *keys;
+ char magic[sizeof(kbd_magic_prefix) + 1];
+ sprintf(magic, "%s%c", kbd_magic_prefix, *suffix);
+ keys = getenv(magic);
+ if (keys) {
+ if (!strcmp(keys, keypress))
+ break;
+ }
+ }
+ if (*suffix) {
+ char cmd_name[sizeof(kbd_command_prefix) + 1];
+ char *cmd;
+ sprintf(cmd_name, "%s%c", kbd_command_prefix, *suffix);
+ cmd = getenv(cmd_name);
+ if (cmd) {
+ setenv("preboot", cmd);
+ return;
+ }
+ }
+ }
+}
+#endif
+
+#ifdef CONFIG_CMD_BMODE
+static const struct boot_mode board_boot_modes[] = {
+ /* 4 bit bus width */
+ {"mmc0", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
+ {"mmc1", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)},
+ {NULL, 0},
+};
+#endif
+
+int misc_init_r(void)
+{
+#ifdef CONFIG_PREBOOT
+ preboot_keys();
+#endif
+
+#ifdef CONFIG_CMD_BMODE
+ add_board_boot_modes(board_boot_modes);
+#endif
+ return 0;
+}
diff --git a/board/cm_t35/Makefile b/board/cm_t35/Makefile
index 894fa09..bde56e6 100644
--- a/board/cm_t35/Makefile
+++ b/board/cm_t35/Makefile
@@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += eeprom.o
+COBJS-$(CONFIG_LCD) += display.o
COBJS := cm_t35.o leds.o $(COBJS-y)
diff --git a/board/cm_t35/cm_t35.c b/board/cm_t35/cm_t35.c
index edbb941..e0e8235 100644
--- a/board/cm_t35/cm_t35.c
+++ b/board/cm_t35/cm_t35.c
@@ -33,6 +33,7 @@
#include <net.h>
#include <i2c.h>
#include <usb.h>
+#include <mmc.h>
#include <twl4030.h>
#include <linux/compiler.h>
@@ -216,6 +217,9 @@ static void cm_t3x_set_common_muxconf(void)
/* SB-T35 Ethernet */
MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0)); /*GPMC_nCS4*/
+ /* DVI enable */
+ MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | DIS | M4));/*GPMC_nCS3*/
+
/* CM-T3x Ethernet */
MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M0)); /*GPMC_nCS5*/
MUX_VAL(CP(GPMC_CLK), (IEN | PTD | DIS | M4)); /*GPIO_59*/
@@ -377,9 +381,19 @@ void set_muxconf_regs(void)
}
#ifdef CONFIG_GENERIC_MMC
+int board_mmc_getcd(struct mmc *mmc)
+{
+ u8 val;
+
+ if (twl4030_i2c_read_u8(TWL4030_CHIP_GPIO, &val, TWL4030_BASEADD_GPIO))
+ return -1;
+
+ return !(val & 1);
+}
+
int board_mmc_init(bd_t *bis)
{
- return omap_mmc_init(0, 0, 0);
+ return omap_mmc_init(0, 0, 0, -1, 59);
}
#endif
diff --git a/board/cm_t35/display.c b/board/cm_t35/display.c
new file mode 100644
index 0000000..2f78bad
--- /dev/null
+++ b/board/cm_t35/display.c
@@ -0,0 +1,428 @@
+/*
+ * (C) Copyright 2012 CompuLab, Ltd. <www.compulab.co.il>
+ *
+ * Authors: Nikita Kiryanov <nikita@compulab.co.il>
+ *
+ * Parsing code based on linux/drivers/video/pxafb.c
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+#include <common.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <stdio_dev.h>
+#include <asm/arch/dss.h>
+#include <lcd.h>
+#include <asm/arch-omap3/dss.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+enum display_type {
+ NONE,
+ DVI,
+ DVI_CUSTOM,
+};
+
+#define CMAP_ADDR 0x80100000
+
+/*
+ * The frame buffer is allocated before we have the chance to parse user input.
+ * To make sure enough memory is allocated for all resolutions, we define
+ * vl_{col | row} to the maximal resolution supported by OMAP3.
+ */
+vidinfo_t panel_info = {
+ .vl_col = 1400,
+ .vl_row = 1050,
+ .vl_bpix = LCD_BPP,
+ .cmap = (ushort *)CMAP_ADDR,
+};
+
+static struct panel_config panel_cfg;
+static enum display_type lcd_def;
+
+/*
+ * A note on DVI presets;
+ * U-Boot can convert 8 bit BMP data to 16 bit BMP data, and OMAP DSS can
+ * convert 16 bit data into 24 bit data. Thus, GFXFORMAT_RGB16 allows us to
+ * support two BMP types with one setting.
+ */
+static const struct panel_config preset_dvi_640X480 = {
+ .lcd_size = PANEL_LCD_SIZE(640, 480),
+ .timing_h = DSS_HBP(48) | DSS_HFP(16) | DSS_HSW(96),
+ .timing_v = DSS_VBP(33) | DSS_VFP(10) | DSS_VSW(2),
+ .divisor = 12 | (1 << 16),
+ .data_lines = LCD_INTERFACE_24_BIT,
+ .panel_type = ACTIVE_DISPLAY,
+ .load_mode = 2,
+ .gfx_format = GFXFORMAT_RGB16,
+};
+
+static const struct panel_config preset_dvi_800X600 = {
+ .lcd_size = PANEL_LCD_SIZE(800, 600),
+ .timing_h = DSS_HBP(88) | DSS_HFP(40) | DSS_HSW(128),
+ .timing_v = DSS_VBP(23) | DSS_VFP(1) | DSS_VSW(4),
+ .divisor = 8 | (1 << 16),
+ .data_lines = LCD_INTERFACE_24_BIT,
+ .panel_type = ACTIVE_DISPLAY,
+ .load_mode = 2,
+ .gfx_format = GFXFORMAT_RGB16,
+};
+
+static const struct panel_config preset_dvi_1024X768 = {
+ .lcd_size = PANEL_LCD_SIZE(1024, 768),
+ .timing_h = DSS_HBP(160) | DSS_HFP(24) | DSS_HSW(136),
+ .timing_v = DSS_VBP(29) | DSS_VFP(3) | DSS_VSW(6),
+ .divisor = 5 | (1 << 16),
+ .data_lines = LCD_INTERFACE_24_BIT,
+ .panel_type = ACTIVE_DISPLAY,
+ .load_mode = 2,
+ .gfx_format = GFXFORMAT_RGB16,
+};
+
+static const struct panel_config preset_dvi_1152X864 = {
+ .lcd_size = PANEL_LCD_SIZE(1152, 864),
+ .timing_h = DSS_HBP(256) | DSS_HFP(64) | DSS_HSW(128),
+ .timing_v = DSS_VBP(32) | DSS_VFP(1) | DSS_VSW(3),
+ .divisor = 3 | (1 << 16),
+ .data_lines = LCD_INTERFACE_24_BIT,
+ .panel_type = ACTIVE_DISPLAY,
+ .load_mode = 2,
+ .gfx_format = GFXFORMAT_RGB16,
+};
+
+static const struct panel_config preset_dvi_1280X960 = {
+ .lcd_size = PANEL_LCD_SIZE(1280, 960),
+ .timing_h = DSS_HBP(312) | DSS_HFP(96) | DSS_HSW(112),
+ .timing_v = DSS_VBP(36) | DSS_VFP(1) | DSS_VSW(3),
+ .divisor = 3 | (1 << 16),
+ .data_lines = LCD_INTERFACE_24_BIT,
+ .panel_type = ACTIVE_DISPLAY,
+ .load_mode = 2,
+ .gfx_format = GFXFORMAT_RGB16,
+};
+
+static const struct panel_config preset_dvi_1280X1024 = {
+ .lcd_size = PANEL_LCD_SIZE(1280, 1024),
+ .timing_h = DSS_HBP(248) | DSS_HFP(48) | DSS_HSW(112),
+ .timing_v = DSS_VBP(38) | DSS_VFP(1) | DSS_VSW(3),
+ .divisor = 3 | (1 << 16),
+ .data_lines = LCD_INTERFACE_24_BIT,
+ .panel_type = ACTIVE_DISPLAY,
+ .load_mode = 2,
+ .gfx_format = GFXFORMAT_RGB16,
+};
+
+/*
+ * set_resolution_params()
+ *
+ * Due to usage of multiple display related APIs resolution data is located in
+ * more than one place. This function updates them all.
+ */
+static void set_resolution_params(int x, int y)
+{
+ panel_cfg.lcd_size = PANEL_LCD_SIZE(x, y);
+ panel_info.vl_col = x;
+ panel_info.vl_row = y;
+ lcd_line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8;
+}
+
+static void set_preset(const struct panel_config preset, int x_res, int y_res)
+{
+ panel_cfg = preset;
+ set_resolution_params(x_res, y_res);
+}
+
+static enum display_type set_dvi_preset(const struct panel_config preset,
+ int x_res, int y_res)
+{
+ set_preset(preset, x_res, y_res);
+ return DVI;
+}
+
+/*
+ * parse_mode() - parse the mode parameter of custom lcd settings
+ *
+ * @mode: <res_x>x<res_y>
+ *
+ * Returns -1 on error, 0 on success.
+ */
+static int parse_mode(const char *mode)
+{
+ unsigned int modelen = strlen(mode);
+ int res_specified = 0;
+ unsigned int xres = 0, yres = 0;
+ int yres_specified = 0;
+ int i;
+
+ for (i = modelen - 1; i >= 0; i--) {
+ switch (mode[i]) {
+ case 'x':
+ if (!yres_specified) {
+ yres = simple_strtoul(&mode[i + 1], NULL, 0);
+ yres_specified = 1;
+ } else {
+ goto done_parsing;
+ }
+
+ break;
+ case '0' ... '9':
+ break;
+ default:
+ goto done_parsing;
+ }
+ }
+
+ if (i < 0 && yres_specified) {
+ xres = simple_strtoul(mode, NULL, 0);
+ res_specified = 1;
+ }
+
+done_parsing:
+ if (res_specified) {
+ set_resolution_params(xres, yres);
+ } else {
+ printf("LCD: invalid mode: %s\n", mode);
+ return -1;
+ }
+
+ return 0;
+}
+
+#define PIXEL_CLK_NUMERATOR (26 * 432 / 39)
+/*
+ * parse_pixclock() - Parse the pixclock parameter of custom lcd settings
+ *
+ * @pixclock: the desired pixel clock
+ *
+ * Returns -1 on error, 0 on success.
+ *
+ * Handling the pixel_clock:
+ *
+ * Pixel clock is defined in the OMAP35x TRM as follows:
+ * pixel_clock =
+ * (SYS_CLK * 2 * PRCM.CM_CLKSEL2_PLL[18:8]) /
+ * (DSS.DISPC_DIVISOR[23:16] * DSS.DISPC_DIVISOR[6:0] *
+ * PRCM.CM_CLKSEL_DSS[4:0] * (PRCM.CM_CLKSEL2_PLL[6:0] + 1))
+ *
+ * In practice, this means that in order to set the
+ * divisor for the desired pixel clock one needs to
+ * solve the following equation:
+ *
+ * 26 * 432 / (39 * <pixel_clock>) = DSS.DISPC_DIVISOR[6:0]
+ *
+ * NOTE: the explicit equation above is reduced. Do not
+ * try to infer anything from these numbers.
+ */
+static int parse_pixclock(char *pixclock)
+{
+ int divisor, pixclock_val;
+ char *pixclk_start = pixclock;
+
+ pixclock_val = simple_strtoul(pixclock, &pixclock, 10);
+ divisor = DIV_ROUND_UP(PIXEL_CLK_NUMERATOR, pixclock_val);
+ /* 0 and 1 are illegal values for PCD */
+ if (divisor <= 1)
+ divisor = 2;
+
+ panel_cfg.divisor = divisor | (1 << 16);
+ if (pixclock[0] != '\0') {
+ printf("LCD: invalid value for pixclock:%s\n", pixclk_start);
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * parse_setting() - parse a single setting of custom lcd parameters
+ *
+ * @setting: The custom lcd setting <name>:<value>
+ *
+ * Returns -1 on failure, 0 on success.
+ */
+static int parse_setting(char *setting)
+{
+ int num_val;
+ char *setting_start = setting;
+
+ if (!strncmp(setting, "mode:", 5)) {
+ return parse_mode(setting + 5);
+ } else if (!strncmp(setting, "pixclock:", 9)) {
+ return parse_pixclock(setting + 9);
+ } else if (!strncmp(setting, "left:", 5)) {
+ num_val = simple_strtoul(setting + 5, &setting, 0);
+ panel_cfg.timing_h |= DSS_HBP(num_val);
+ } else if (!strncmp(setting, "right:", 6)) {
+ num_val = simple_strtoul(setting + 6, &setting, 0);
+ panel_cfg.timing_h |= DSS_HFP(num_val);
+ } else if (!strncmp(setting, "upper:", 6)) {
+ num_val = simple_strtoul(setting + 6, &setting, 0);
+ panel_cfg.timing_v |= DSS_VBP(num_val);
+ } else if (!strncmp(setting, "lower:", 6)) {
+ num_val = simple_strtoul(setting + 6, &setting, 0);
+ panel_cfg.timing_v |= DSS_VFP(num_val);
+ } else if (!strncmp(setting, "hsynclen:", 9)) {
+ num_val = simple_strtoul(setting + 9, &setting, 0);
+ panel_cfg.timing_h |= DSS_HSW(num_val);
+ } else if (!strncmp(setting, "vsynclen:", 9)) {
+ num_val = simple_strtoul(setting + 9, &setting, 0);
+ panel_cfg.timing_v |= DSS_VSW(num_val);
+ } else if (!strncmp(setting, "hsync:", 6)) {
+ if (simple_strtoul(setting + 6, &setting, 0) == 0)
+ panel_cfg.pol_freq |= DSS_IHS;
+ else
+ panel_cfg.pol_freq &= ~DSS_IHS;
+ } else if (!strncmp(setting, "vsync:", 6)) {
+ if (simple_strtoul(setting + 6, &setting, 0) == 0)
+ panel_cfg.pol_freq |= DSS_IVS;
+ else
+ panel_cfg.pol_freq &= ~DSS_IVS;
+ } else if (!strncmp(setting, "outputen:", 9)) {
+ if (simple_strtoul(setting + 9, &setting, 0) == 0)
+ panel_cfg.pol_freq |= DSS_IEO;
+ else
+ panel_cfg.pol_freq &= ~DSS_IEO;
+ } else if (!strncmp(setting, "pixclockpol:", 12)) {
+ if (simple_strtoul(setting + 12, &setting, 0) == 0)
+ panel_cfg.pol_freq |= DSS_IPC;
+ else
+ panel_cfg.pol_freq &= ~DSS_IPC;
+ } else if (!strncmp(setting, "active", 6)) {
+ panel_cfg.panel_type = ACTIVE_DISPLAY;
+ return 0; /* Avoid sanity check below */
+ } else if (!strncmp(setting, "passive", 7)) {
+ panel_cfg.panel_type = PASSIVE_DISPLAY;
+ return 0; /* Avoid sanity check below */
+ } else if (!strncmp(setting, "display:", 8)) {
+ if (!strncmp(setting + 8, "dvi", 3)) {
+ lcd_def = DVI_CUSTOM;
+ return 0; /* Avoid sanity check below */
+ }
+ } else {
+ printf("LCD: unknown option %s\n", setting_start);
+ return -1;
+ }
+
+ if (setting[0] != '\0') {
+ printf("LCD: invalid value for %s\n", setting_start);
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * env_parse_customlcd() - parse custom lcd params from an environment variable.
+ *
+ * @custom_lcd_params: The environment variable containing the lcd params.
+ *
+ * Returns -1 on failure, 0 on success.
+ */
+static int parse_customlcd(char *custom_lcd_params)
+{
+ char params_cpy[160];
+ char *setting;
+
+ strncpy(params_cpy, custom_lcd_params, 160);
+ setting = strtok(params_cpy, ",");
+ while (setting) {
+ if (parse_setting(setting) < 0)
+ return -1;
+
+ setting = strtok(NULL, ",");
+ }
+
+ /* Currently we don't support changing this via custom lcd params */
+ panel_cfg.data_lines = LCD_INTERFACE_24_BIT;
+ panel_cfg.gfx_format = GFXFORMAT_RGB16; /* See dvi predefines note */
+
+ return 0;
+}
+
+/*
+ * env_parse_displaytype() - parse display type.
+ *
+ * Parses the environment variable "displaytype", which contains the
+ * name of the display type or preset, in which case it applies its
+ * configurations.
+ *
+ * Returns the type of display that was specified.
+ */
+static enum display_type env_parse_displaytype(char *displaytype)
+{
+ if (!strncmp(displaytype, "dvi640x480", 10))
+ return set_dvi_preset(preset_dvi_640X480, 640, 480);
+ else if (!strncmp(displaytype, "dvi800x600", 10))
+ return set_dvi_preset(preset_dvi_800X600, 800, 600);
+ else if (!strncmp(displaytype, "dvi1024x768", 11))
+ return set_dvi_preset(preset_dvi_1024X768, 1024, 768);
+ else if (!strncmp(displaytype, "dvi1152x864", 11))
+ return set_dvi_preset(preset_dvi_1152X864, 1152, 864);
+ else if (!strncmp(displaytype, "dvi1280x960", 11))
+ return set_dvi_preset(preset_dvi_1280X960, 1280, 960);
+ else if (!strncmp(displaytype, "dvi1280x1024", 12))
+ return set_dvi_preset(preset_dvi_1280X1024, 1280, 1024);
+
+ return NONE;
+}
+
+int lcd_line_length;
+int lcd_color_fg;
+int lcd_color_bg;
+void *lcd_base;
+short console_col;
+short console_row;
+void *lcd_console_address;
+
+void lcd_ctrl_init(void *lcdbase)
+{
+ struct prcm *prcm = (struct prcm *)PRCM_BASE;
+ char *custom_lcd;
+ char *displaytype = getenv("displaytype");
+
+ if (displaytype == NULL)
+ return;
+
+ lcd_def = env_parse_displaytype(displaytype);
+ /* If we did not recognize the preset, check if it's an env variable */
+ if (lcd_def == NONE) {
+ custom_lcd = getenv(displaytype);
+ if (custom_lcd == NULL || parse_customlcd(custom_lcd) < 0)
+ return;
+ }
+
+ panel_cfg.frame_buffer = lcdbase;
+ omap3_dss_panel_config(&panel_cfg);
+ /*
+ * Pixel clock is defined with many divisions and only few
+ * multiplications of the system clock. Since DSS FCLK divisor is set
+ * to 16 by default, we need to set it to a smaller value, like 3
+ * (chosen via trial and error).
+ */
+ clrsetbits_le32(&prcm->clksel_dss, 0xF, 3);
+}
+
+void lcd_enable(void)
+{
+ if (lcd_def == DVI || lcd_def == DVI_CUSTOM) {
+ gpio_direction_output(54, 0); /* Turn on DVI */
+ omap3_dss_enable();
+ }
+}
+
+void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue) {}
diff --git a/board/cobra5272/u-boot.lds b/board/cobra5272/u-boot.lds
index 47378fd..809a705 100644
--- a/board/cobra5272/u-boot.lds
+++ b/board/cobra5272/u-boot.lds
@@ -71,7 +71,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/cogent/u-boot.lds b/board/cogent/u-boot.lds
index 1cc482f..1f006d7 100644
--- a/board/cogent/u-boot.lds
+++ b/board/cogent/u-boot.lds
@@ -73,7 +73,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/cogent/u-boot.lds.debug b/board/cogent/u-boot.lds.debug
index dc8c4e9..e88bd97 100644
--- a/board/cogent/u-boot.lds.debug
+++ b/board/cogent/u-boot.lds.debug
@@ -109,7 +109,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/comelit/dig297/dig297.c b/board/comelit/dig297/dig297.c
index c6c1071..2dca275 100644
--- a/board/comelit/dig297/dig297.c
+++ b/board/comelit/dig297/dig297.c
@@ -147,8 +147,7 @@ void set_muxconf_regs(void)
#ifdef CONFIG_GENERIC_MMC
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0, 0, 0);
- return 0;
+ return omap_mmc_init(0, 0, 0, -1, -1);
}
#endif
diff --git a/board/compal/dts/tegra20-paz00.dts b/board/compal/dts/tegra20-paz00.dts
index 31b064d..780203c 100644
--- a/board/compal/dts/tegra20-paz00.dts
+++ b/board/compal/dts/tegra20-paz00.dts
@@ -1,13 +1,15 @@
/dts-v1/;
-/include/ ARCH_CPU_DTS
+#include "tegra20.dtsi"
/ {
- model = "Toshiba AC100 / Dynabook AZ";
- compatible = "compal,paz00", "nvidia,tegra20";
+ model = "Toshiba AC100 / Dynabook AZ";
+ compatible = "compal,paz00", "nvidia,tegra20";
aliases {
usb0 = "/usb@c5008000";
+ sdhci0 = "/sdhci@c8000600";
+ sdhci1 = "/sdhci@c8000000";
};
memory {
@@ -53,6 +55,19 @@
status = "disabled";
};
+ sdhci@c8000000 {
+ status = "okay";
+ cd-gpios = <&gpio 173 1>; /* gpio PV5 */
+ wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+ power-gpios = <&gpio 169 0>; /* gpio PV1 */
+ bus-width = <4>;
+ };
+
+ sdhci@c8000600 {
+ status = "okay";
+ bus-width = <8>;
+ };
+
lcd_panel: panel {
/* PAZ00 has 1024x600 */
clock = <54030000>;
diff --git a/board/compal/paz00/paz00.c b/board/compal/paz00/paz00.c
index 1447f47..d6e5c37 100644
--- a/board/compal/paz00/paz00.c
+++ b/board/compal/paz00/paz00.c
@@ -18,19 +18,14 @@
#include <asm/io.h>
#include <asm/arch/tegra.h>
#include <asm/arch/pinmux.h>
-#include <asm/arch-tegra/mmc.h>
#include <asm/gpio.h>
-#ifdef CONFIG_TEGRA_MMC
-#include <mmc.h>
-#endif
-
#ifdef CONFIG_TEGRA_MMC
/*
* Routine: pin_mux_mmc
* Description: setup the pin muxes/tristate values for the SDMMC(s)
*/
-static void pin_mux_mmc(void)
+void pin_mux_mmc(void)
{
/* SDMMC4: config 3, x8 on 2nd set of pins */
pinmux_set_func(PINGRP_ATB, PMUX_FUNC_SDIO4);
@@ -51,25 +46,6 @@ static void pin_mux_mmc(void)
/* For CD GPIO PV5 */
pinmux_tristate_disable(PINGRP_GPV);
}
-
-/* this is a weak define that we are overriding */
-int board_mmc_init(bd_t *bd)
-{
- debug("board_mmc_init called\n");
-
- /* Enable muxes, etc. for SDMMC controllers */
- pin_mux_mmc();
-
- debug("board_mmc_init: init eMMC\n");
- /* init dev 0, eMMC chip, with 8-bit bus */
- tegra_mmc_init(0, 8, -1, -1);
-
- debug("board_mmc_init: init SD slot\n");
- /* init dev 3, SD slot, with 4-bit bus */
- tegra_mmc_init(3, 4, GPIO_PV1, GPIO_PV5);
-
- return 0;
-}
#endif
#ifdef CONFIG_LCD
diff --git a/board/compulab/dts/tegra20-trimslice.dts b/board/compulab/dts/tegra20-trimslice.dts
index 7aeed67..ee31476 100644
--- a/board/compulab/dts/tegra20-trimslice.dts
+++ b/board/compulab/dts/tegra20-trimslice.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ ARCH_CPU_DTS
+#include "tegra20.dtsi"
/ {
model = "Compulab TrimSlice board";
@@ -9,6 +9,8 @@
aliases {
usb0 = "/usb@c5008000";
usb1 = "/usb@c5000000";
+ sdhci0 = "/sdhci@c8000600";
+ sdhci1 = "/sdhci@c8000000";
};
memory {
@@ -47,4 +49,16 @@
usb@c5004000 {
status = "disabled";
};
+
+ sdhci@c8000000 {
+ status = "okay";
+ bus-width = <4>;
+ };
+
+ sdhci@c8000600 {
+ status = "okay";
+ cd-gpios = <&gpio 121 1>; /* gpio PP1 */
+ wp-gpios = <&gpio 122 0>; /* gpio PP2 */
+ bus-width = <4>;
+ };
};
diff --git a/board/compulab/trimslice/trimslice.c b/board/compulab/trimslice/trimslice.c
index 8f4dd09..8401100 100644
--- a/board/compulab/trimslice/trimslice.c
+++ b/board/compulab/trimslice/trimslice.c
@@ -27,12 +27,8 @@
#include <asm/arch/clock.h>
#include <asm/arch/funcmux.h>
#include <asm/arch/pinmux.h>
-#include <asm/arch-tegra/mmc.h>
#include <asm/gpio.h>
#include <i2c.h>
-#ifdef CONFIG_TEGRA_MMC
-#include <mmc.h>
-#endif
void pin_mux_usb(void)
{
@@ -52,7 +48,7 @@ void pin_mux_spi(void)
* Routine: pin_mux_mmc
* Description: setup the pin muxes/tristate values for the SDMMC(s)
*/
-static void pin_mux_mmc(void)
+void pin_mux_mmc(void)
{
funcmux_select(PERIPH_ID_SDMMC1, FUNCMUX_SDMMC1_SDIO1_4BIT);
funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_4_BIT);
@@ -60,20 +56,3 @@ static void pin_mux_mmc(void)
/* For CD GPIO PP1 */
pinmux_tristate_disable(PINGRP_DAP3);
}
-
-/* this is a weak define that we are overriding */
-int board_mmc_init(bd_t *bd)
-{
- debug("board_mmc_init called\n");
-
- /* Enable muxes, etc. for SDMMC controllers */
- pin_mux_mmc();
-
- /* init dev 0 (SDMMC4), (micro-SD slot) with 4-bit bus */
- tegra_mmc_init(0, 4, -1, GPIO_PP1);
-
- /* init dev 3 (SDMMC1), (SD slot) with 4-bit bus */
- tegra_mmc_init(3, 4, -1, -1);
-
- return 0;
-}
diff --git a/board/corscience/tricorder/tricorder.c b/board/corscience/tricorder/tricorder.c
index 56fe495..5c02eaf 100644
--- a/board/corscience/tricorder/tricorder.c
+++ b/board/corscience/tricorder/tricorder.c
@@ -80,7 +80,7 @@ void set_muxconf_regs(void)
#if defined(CONFIG_GENERIC_MMC) && !(defined(CONFIG_SPL_BUILD))
int board_mmc_init(bd_t *bis)
{
- return omap_mmc_init(0, 0, 0);
+ return omap_mmc_init(0, 0, 0, -1, -1);
}
#endif
diff --git a/board/cray/L1/u-boot.lds.debug b/board/cray/L1/u-boot.lds.debug
index d7a2e56..99cbed4 100644
--- a/board/cray/L1/u-boot.lds.debug
+++ b/board/cray/L1/u-boot.lds.debug
@@ -109,7 +109,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/dave/PPChameleonEVB/u-boot.lds b/board/dave/PPChameleonEVB/u-boot.lds
index 512fe1a..663100e 100644
--- a/board/dave/PPChameleonEVB/u-boot.lds
+++ b/board/dave/PPChameleonEVB/u-boot.lds
@@ -77,7 +77,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/davinci/da8xxevm/u-boot-spl-da850evm.lds b/board/davinci/da8xxevm/u-boot-spl-da850evm.lds
index 6d287f1..bc34fb5 100644
--- a/board/davinci/da8xxevm/u-boot-spl-da850evm.lds
+++ b/board/davinci/da8xxevm/u-boot-spl-da850evm.lds
@@ -49,11 +49,6 @@ SECTIONS
.data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
. = ALIGN(4);
- .u_boot_list : {
- #include <u-boot.lst>
- } >.sram
-
- . = ALIGN(4);
.rel.dyn : {
__rel_dyn_start = .;
*(.rel*)
diff --git a/board/davinci/da8xxevm/u-boot-spl-hawk.lds b/board/davinci/da8xxevm/u-boot-spl-hawk.lds
index e3a07cc..2557830 100644
--- a/board/davinci/da8xxevm/u-boot-spl-hawk.lds
+++ b/board/davinci/da8xxevm/u-boot-spl-hawk.lds
@@ -58,11 +58,6 @@ SECTIONS
}
. = ALIGN(4);
- .u_boot_list : {
- #include <u-boot.lst>
- }
-
- . = ALIGN(4);
__rel_dyn_start = .;
__rel_dyn_end = .;
__dynsym_start = .;
diff --git a/board/denx/m28evk/m28evk.c b/board/denx/m28evk/m28evk.c
index d93efaf..aff7c1f 100644
--- a/board/denx/m28evk/m28evk.c
+++ b/board/denx/m28evk/m28evk.c
@@ -57,6 +57,10 @@ int board_early_init_f(void)
mxs_iomux_setup_pad(MX28_PAD_AUART3_TX__GPIO_3_13 |
MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP);
gpio_direction_output(MX28_PAD_AUART3_TX__GPIO_3_13, 0);
+
+ mxs_iomux_setup_pad(MX28_PAD_AUART3_RX__GPIO_3_12 |
+ MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP);
+ gpio_direction_output(MX28_PAD_AUART3_RX__GPIO_3_12, 0);
#endif
return 0;
diff --git a/board/dvlhost/u-boot.lds b/board/dvlhost/u-boot.lds
index ed91003..b13d3e1 100644
--- a/board/dvlhost/u-boot.lds
+++ b/board/dvlhost/u-boot.lds
@@ -57,7 +57,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = ALIGN (4);
@@ -72,13 +72,21 @@ SECTIONS
*(.dynsym)
}
- .bss __rel_dyn_start (OVERLAY) : {
- __bss_start = .;
+ _end = .;
+
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ }
+
+ .bss __bss_start (OVERLAY) : {
*(.bss*)
. = ALIGN(4);
- _end = .;
+ __bss_end = .;
}
- __bss_end =.;
+ .bss_end __bss_end (OVERLAY) : {
+ KEEP(*(__bss_end));
+ }
+
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
/DISCARD/ : { *(.plt*) }
diff --git a/board/eltec/mhpc/u-boot.lds b/board/eltec/mhpc/u-boot.lds
index 3c1c05a..a1481c8 100644
--- a/board/eltec/mhpc/u-boot.lds
+++ b/board/eltec/mhpc/u-boot.lds
@@ -69,7 +69,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/eltec/mhpc/u-boot.lds.debug b/board/eltec/mhpc/u-boot.lds.debug
index 92796e6..614bbb2 100644
--- a/board/eltec/mhpc/u-boot.lds.debug
+++ b/board/eltec/mhpc/u-boot.lds.debug
@@ -109,7 +109,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/emk/top860/u-boot.lds b/board/emk/top860/u-boot.lds
index 155fa76..e3f7d80 100644
--- a/board/emk/top860/u-boot.lds
+++ b/board/emk/top860/u-boot.lds
@@ -70,7 +70,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/ep88x/u-boot.lds b/board/ep88x/u-boot.lds
index 7baaad8..c00b3c3 100644
--- a/board/ep88x/u-boot.lds
+++ b/board/ep88x/u-boot.lds
@@ -65,7 +65,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/esd/dasa_sim/u-boot.lds b/board/esd/dasa_sim/u-boot.lds
index cb94a51..4297b8b 100644
--- a/board/esd/dasa_sim/u-boot.lds
+++ b/board/esd/dasa_sim/u-boot.lds
@@ -76,7 +76,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/esd/pmc440/u-boot-nand.lds b/board/esd/pmc440/u-boot-nand.lds
index 101b893..6a5cef6 100644
--- a/board/esd/pmc440/u-boot-nand.lds
+++ b/board/esd/pmc440/u-boot-nand.lds
@@ -104,7 +104,7 @@ SECTIONS
. = .;
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/esd/tasreg/u-boot.lds b/board/esd/tasreg/u-boot.lds
index fd77fa9..a4d9da7 100644
--- a/board/esd/tasreg/u-boot.lds
+++ b/board/esd/tasreg/u-boot.lds
@@ -68,7 +68,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/esteem192e/u-boot.lds b/board/esteem192e/u-boot.lds
index 7ffdc17..642f1c9 100644
--- a/board/esteem192e/u-boot.lds
+++ b/board/esteem192e/u-boot.lds
@@ -77,7 +77,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/evb64260/u-boot.lds b/board/evb64260/u-boot.lds
index 4b956f8..44c61eb 100644
--- a/board/evb64260/u-boot.lds
+++ b/board/evb64260/u-boot.lds
@@ -73,7 +73,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/fads/u-boot.lds b/board/fads/u-boot.lds
index 1cb191c..0e2206c 100644
--- a/board/fads/u-boot.lds
+++ b/board/fads/u-boot.lds
@@ -71,7 +71,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/flagadm/u-boot.lds b/board/flagadm/u-boot.lds
index 3c1c05a..a1481c8 100644
--- a/board/flagadm/u-boot.lds
+++ b/board/flagadm/u-boot.lds
@@ -69,7 +69,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/flagadm/u-boot.lds.debug b/board/flagadm/u-boot.lds.debug
index 92796e6..614bbb2 100644
--- a/board/flagadm/u-boot.lds.debug
+++ b/board/flagadm/u-boot.lds.debug
@@ -109,7 +109,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
index c86cd40..f4cae5e 100644
--- a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
+++ b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
@@ -109,12 +109,12 @@ DATA 4 0x021b4828 0x33333333
DATA 4 0x021b0018 0x00081740
DATA 4 0x021b001c 0x00008000
-DATA 4 0x021b000c 0x555A7975
-DATA 4 0x021b0010 0xFF538E64
+DATA 4 0x021b000c 0x555A7974
+DATA 4 0x021b0010 0xDB538F64
DATA 4 0x021b0014 0x01FF00DB
DATA 4 0x021b002c 0x000026D2
-DATA 4 0x021b0030 0x005B0E21
+DATA 4 0x021b0030 0x005A1023
DATA 4 0x021b0008 0x09444040
DATA 4 0x021b0004 0x00025576
DATA 4 0x021b0040 0x00000027
@@ -126,8 +126,8 @@ DATA 4 0x021b001c 0x00008033
DATA 4 0x021b001c 0x0000803B
DATA 4 0x021b001c 0x00428031
DATA 4 0x021b001c 0x00428039
-DATA 4 0x021b001c 0x09408030
-DATA 4 0x021b001c 0x09408038
+DATA 4 0x021b001c 0x19308030
+DATA 4 0x021b001c 0x19308038
DATA 4 0x021b001c 0x04008040
DATA 4 0x021b001c 0x04008048
diff --git a/board/freescale/m5208evbe/u-boot.lds b/board/freescale/m5208evbe/u-boot.lds
index da4b4f2..6f80e41 100644
--- a/board/freescale/m5208evbe/u-boot.lds
+++ b/board/freescale/m5208evbe/u-boot.lds
@@ -72,7 +72,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/freescale/m52277evb/u-boot.lds b/board/freescale/m52277evb/u-boot.lds
index e3f8847..9db171e 100644
--- a/board/freescale/m52277evb/u-boot.lds
+++ b/board/freescale/m52277evb/u-boot.lds
@@ -71,7 +71,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/freescale/m5235evb/u-boot.lds b/board/freescale/m5235evb/u-boot.lds
index c324b64..f11d483 100644
--- a/board/freescale/m5235evb/u-boot.lds
+++ b/board/freescale/m5235evb/u-boot.lds
@@ -71,7 +71,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/freescale/m5249evb/u-boot.lds b/board/freescale/m5249evb/u-boot.lds
index 47378fd..809a705 100644
--- a/board/freescale/m5249evb/u-boot.lds
+++ b/board/freescale/m5249evb/u-boot.lds
@@ -71,7 +71,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/freescale/m5253demo/u-boot.lds b/board/freescale/m5253demo/u-boot.lds
index d14a2af..9de8885 100644
--- a/board/freescale/m5253demo/u-boot.lds
+++ b/board/freescale/m5253demo/u-boot.lds
@@ -72,7 +72,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/freescale/m5253evbe/u-boot.lds b/board/freescale/m5253evbe/u-boot.lds
index 47378fd..809a705 100644
--- a/board/freescale/m5253evbe/u-boot.lds
+++ b/board/freescale/m5253evbe/u-boot.lds
@@ -71,7 +71,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/freescale/m5271evb/u-boot.lds b/board/freescale/m5271evb/u-boot.lds
index c7574c9..82b67d5 100644
--- a/board/freescale/m5271evb/u-boot.lds
+++ b/board/freescale/m5271evb/u-boot.lds
@@ -71,7 +71,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/freescale/m5272c3/u-boot.lds b/board/freescale/m5272c3/u-boot.lds
index 47378fd..809a705 100644
--- a/board/freescale/m5272c3/u-boot.lds
+++ b/board/freescale/m5272c3/u-boot.lds
@@ -71,7 +71,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/freescale/m5275evb/u-boot.lds b/board/freescale/m5275evb/u-boot.lds
index 7f3b73d..fda4cf4 100644
--- a/board/freescale/m5275evb/u-boot.lds
+++ b/board/freescale/m5275evb/u-boot.lds
@@ -71,7 +71,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/freescale/m5282evb/u-boot.lds b/board/freescale/m5282evb/u-boot.lds
index 35d669c..cdfd0e4 100644
--- a/board/freescale/m5282evb/u-boot.lds
+++ b/board/freescale/m5282evb/u-boot.lds
@@ -71,7 +71,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/freescale/m53017evb/u-boot.lds b/board/freescale/m53017evb/u-boot.lds
index 1a6f0cd..c40c565 100644
--- a/board/freescale/m53017evb/u-boot.lds
+++ b/board/freescale/m53017evb/u-boot.lds
@@ -74,7 +74,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/freescale/m5329evb/u-boot.lds b/board/freescale/m5329evb/u-boot.lds
index f5cc586..f803e4a 100644
--- a/board/freescale/m5329evb/u-boot.lds
+++ b/board/freescale/m5329evb/u-boot.lds
@@ -72,7 +72,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/freescale/m5373evb/u-boot.lds b/board/freescale/m5373evb/u-boot.lds
index 11aa092..264e43f 100644
--- a/board/freescale/m5373evb/u-boot.lds
+++ b/board/freescale/m5373evb/u-boot.lds
@@ -72,7 +72,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/freescale/m54418twr/u-boot.lds b/board/freescale/m54418twr/u-boot.lds
index 5ae7fce..3247dbf 100644
--- a/board/freescale/m54418twr/u-boot.lds
+++ b/board/freescale/m54418twr/u-boot.lds
@@ -69,7 +69,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/freescale/m54451evb/u-boot.lds b/board/freescale/m54451evb/u-boot.lds
index 2bd4a73..fd1289e 100644
--- a/board/freescale/m54451evb/u-boot.lds
+++ b/board/freescale/m54451evb/u-boot.lds
@@ -69,7 +69,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/freescale/m54455evb/u-boot.lds b/board/freescale/m54455evb/u-boot.lds
index 5ae7fce..3247dbf 100644
--- a/board/freescale/m54455evb/u-boot.lds
+++ b/board/freescale/m54455evb/u-boot.lds
@@ -69,7 +69,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/freescale/m547xevb/u-boot.lds b/board/freescale/m547xevb/u-boot.lds
index 5e987bb..bbe36f0 100644
--- a/board/freescale/m547xevb/u-boot.lds
+++ b/board/freescale/m547xevb/u-boot.lds
@@ -69,7 +69,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/freescale/m548xevb/u-boot.lds b/board/freescale/m548xevb/u-boot.lds
index 27340ee..9315927 100644
--- a/board/freescale/m548xevb/u-boot.lds
+++ b/board/freescale/m548xevb/u-boot.lds
@@ -69,7 +69,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/freescale/mx23evk/spl_boot.c b/board/freescale/mx23evk/spl_boot.c
index 6007433..b6f4e7e 100644
--- a/board/freescale/mx23evk/spl_boot.c
+++ b/board/freescale/mx23evk/spl_boot.c
@@ -98,6 +98,16 @@ const iomux_cfg_t iomux_setup[] = {
(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
};
+#define HW_DRAM_CTL14 (0x38 >> 2)
+#define CS_MAP 0x3
+#define INTAREF 0x2
+#define HW_DRAM_CTL14_CONFIG (INTAREF << 8 | CS_MAP)
+
+void mxs_adjust_memory_params(uint32_t *dram_vals)
+{
+ dram_vals[HW_DRAM_CTL14] = HW_DRAM_CTL14_CONFIG;
+}
+
void board_init_ll(void)
{
mxs_common_spl_init(iomux_setup, ARRAY_SIZE(iomux_setup));
diff --git a/board/freescale/mx31ads/u-boot.lds b/board/freescale/mx31ads/u-boot.lds
index 4d1858b..264c4e8 100644
--- a/board/freescale/mx31ads/u-boot.lds
+++ b/board/freescale/mx31ads/u-boot.lds
@@ -60,7 +60,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = ALIGN(4);
@@ -80,11 +80,17 @@ SECTIONS
_end = .;
- .bss __rel_dyn_start (OVERLAY) : {
- __bss_start = .;
- *(.bss)
+ .bss_start __rel_dyn_start (OVERLAY) : {
+ KEEP(*(.__bss_start));
+ }
+
+ .bss __bss_start (OVERLAY) : {
+ *(.bss*)
. = ALIGN(4);
- __bss_end = .;
+ __bss_end = .;
+ }
+ .bss_end __bss_end (OVERLAY) : {
+ KEEP(*(__bss_end));
}
/DISCARD/ : { *(.bss*) }
diff --git a/board/freescale/mx6qarm2/mx6qarm2.c b/board/freescale/mx6qarm2/mx6qarm2.c
index ee20d4f..ff7f5e8 100644
--- a/board/freescale/mx6qarm2/mx6qarm2.c
+++ b/board/freescale/mx6qarm2/mx6qarm2.c
@@ -23,7 +23,7 @@
#include <common.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
-#include <asm/arch/mx6x_pins.h>
+#include <asm/arch/mx6q_pins.h>
#include <asm/arch/clock.h>
#include <asm/errno.h>
#include <asm/gpio.h>
@@ -55,53 +55,53 @@ int dram_init(void)
}
iomux_v3_cfg_t const uart4_pads[] = {
- MX6Q_PAD_KEY_COL0__UART4_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
- MX6Q_PAD_KEY_ROW0__UART4_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_KEY_COL0__UART4_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_KEY_ROW0__UART4_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
};
iomux_v3_cfg_t const usdhc3_pads[] = {
- MX6Q_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_NANDF_CS0__GPIO_6_11 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
+ MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT4__USDHC3_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT5__USDHC3_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT6__USDHC3_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT7__USDHC3_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NANDF_CS0__GPIO_6_11 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
};
iomux_v3_cfg_t const usdhc4_pads[] = {
- MX6Q_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT1__USDHC4_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT2__USDHC4_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT3__USDHC4_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT4__USDHC4_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT5__USDHC4_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT6__USDHC4_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT7__USDHC4_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
};
iomux_v3_cfg_t const enet_pads[] = {
- MX6Q_PAD_KEY_COL1__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_KEY_COL2__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_KEY_COL1__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_KEY_COL2__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD2__ENET_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD3__ENET_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
};
diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
index 9e3700e..91cc007 100644
--- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c
+++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
@@ -22,7 +22,7 @@
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/iomux.h>
-#include <asm/arch/mx6x_pins.h>
+#include <asm/arch/mx6q_pins.h>
#include <asm/errno.h>
#include <asm/gpio.h>
#include <asm/imx-common/iomux-v3.h>
@@ -54,26 +54,26 @@ int dram_init(void)
}
iomux_v3_cfg_t const uart4_pads[] = {
- MX6Q_PAD_KEY_COL0__UART4_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
- MX6Q_PAD_KEY_ROW0__UART4_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_KEY_COL0__UART4_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_KEY_ROW0__UART4_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
};
iomux_v3_cfg_t const enet_pads[] = {
- MX6Q_PAD_KEY_COL1__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_KEY_COL2__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_KEY_COL1__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_KEY_COL2__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD2__ENET_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD3__ENET_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
};
static void setup_iomux_enet(void)
@@ -82,18 +82,18 @@ static void setup_iomux_enet(void)
}
iomux_v3_cfg_t const usdhc3_pads[] = {
- MX6Q_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_GPIO_18__USDHC3_VSELECT | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_NANDF_CS2__GPIO_6_15 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT4__USDHC3_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT5__USDHC3_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT6__USDHC3_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT7__USDHC3_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_GPIO_18__USDHC3_VSELECT | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NANDF_CS2__GPIO_6_15 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
static void setup_iomux_uart(void)
diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
index f010d0c..5b69a6d 100644
--- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
+++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
@@ -25,7 +25,7 @@
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/iomux.h>
-#include <asm/arch/mx6x_pins.h>
+#include <asm/arch/mx6q_pins.h>
#include <asm/errno.h>
#include <asm/gpio.h>
#include <asm/imx-common/iomux-v3.h>
@@ -46,12 +46,12 @@
DECLARE_GLOBAL_DATA_PTR;
#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
- PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+ PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
+ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
#define ENET_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
@@ -72,19 +72,19 @@ DECLARE_GLOBAL_DATA_PTR;
int dram_init(void)
{
- gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
+ gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
- return 0;
+ return 0;
}
iomux_v3_cfg_t const uart1_pads[] = {
- MX6Q_PAD_SD3_DAT6__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
- MX6Q_PAD_SD3_DAT7__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_SD3_DAT6__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_SD3_DAT7__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
};
iomux_v3_cfg_t const uart2_pads[] = {
- MX6Q_PAD_EIM_D26__UART2_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
- MX6Q_PAD_EIM_D27__UART2_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_EIM_D26__UART2_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_EIM_D27__UART2_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
};
#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
@@ -92,13 +92,13 @@ iomux_v3_cfg_t const uart2_pads[] = {
/* I2C1, SGTL5000 */
struct i2c_pads_info i2c_pad_info0 = {
.scl = {
- .i2c_mode = MX6Q_PAD_EIM_D21__I2C1_SCL | PC,
- .gpio_mode = MX6Q_PAD_EIM_D21__GPIO_3_21 | PC,
+ .i2c_mode = MX6_PAD_EIM_D21__I2C1_SCL | PC,
+ .gpio_mode = MX6_PAD_EIM_D21__GPIO_3_21 | PC,
.gp = IMX_GPIO_NR(3, 21)
},
.sda = {
- .i2c_mode = MX6Q_PAD_EIM_D28__I2C1_SDA | PC,
- .gpio_mode = MX6Q_PAD_EIM_D28__GPIO_3_28 | PC,
+ .i2c_mode = MX6_PAD_EIM_D28__I2C1_SDA | PC,
+ .gpio_mode = MX6_PAD_EIM_D28__GPIO_3_28 | PC,
.gp = IMX_GPIO_NR(3, 28)
}
};
@@ -106,13 +106,13 @@ struct i2c_pads_info i2c_pad_info0 = {
/* I2C2 Camera, MIPI */
struct i2c_pads_info i2c_pad_info1 = {
.scl = {
- .i2c_mode = MX6Q_PAD_KEY_COL3__I2C2_SCL | PC,
- .gpio_mode = MX6Q_PAD_KEY_COL3__GPIO_4_12 | PC,
+ .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | PC,
+ .gpio_mode = MX6_PAD_KEY_COL3__GPIO_4_12 | PC,
.gp = IMX_GPIO_NR(4, 12)
},
.sda = {
- .i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | PC,
- .gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO_4_13 | PC,
+ .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | PC,
+ .gpio_mode = MX6_PAD_KEY_ROW3__GPIO_4_13 | PC,
.gp = IMX_GPIO_NR(4, 13)
}
};
@@ -120,86 +120,86 @@ struct i2c_pads_info i2c_pad_info1 = {
/* I2C3, J15 - RGB connector */
struct i2c_pads_info i2c_pad_info2 = {
.scl = {
- .i2c_mode = MX6Q_PAD_GPIO_5__I2C3_SCL | PC,
- .gpio_mode = MX6Q_PAD_GPIO_5__GPIO_1_5 | PC,
+ .i2c_mode = MX6_PAD_GPIO_5__I2C3_SCL | PC,
+ .gpio_mode = MX6_PAD_GPIO_5__GPIO_1_5 | PC,
.gp = IMX_GPIO_NR(1, 5)
},
.sda = {
- .i2c_mode = MX6Q_PAD_GPIO_16__I2C3_SDA | PC,
- .gpio_mode = MX6Q_PAD_GPIO_16__GPIO_7_11 | PC,
+ .i2c_mode = MX6_PAD_GPIO_16__I2C3_SDA | PC,
+ .gpio_mode = MX6_PAD_GPIO_16__GPIO_7_11 | PC,
.gp = IMX_GPIO_NR(7, 11)
}
};
iomux_v3_cfg_t const usdhc3_pads[] = {
- MX6Q_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD3_DAT5__GPIO_7_0 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
+ MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT5__GPIO_7_0 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
};
iomux_v3_cfg_t const usdhc4_pads[] = {
- MX6Q_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_NANDF_D6__GPIO_2_6 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
+ MX6_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT1__USDHC4_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT2__USDHC4_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT3__USDHC4_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NANDF_D6__GPIO_2_6 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
};
iomux_v3_cfg_t const enet_pads1[] = {
- MX6Q_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
/* pin 35 - 1 (PHY_AD2) on reset */
- MX6Q_PAD_RGMII_RXC__GPIO_6_30 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_RGMII_RXC__GPIO_6_30 | MUX_PAD_CTRL(NO_PAD_CTRL),
/* pin 32 - 1 - (MODE0) all */
- MX6Q_PAD_RGMII_RD0__GPIO_6_25 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_RGMII_RD0__GPIO_6_25 | MUX_PAD_CTRL(NO_PAD_CTRL),
/* pin 31 - 1 - (MODE1) all */
- MX6Q_PAD_RGMII_RD1__GPIO_6_27 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_RGMII_RD1__GPIO_6_27 | MUX_PAD_CTRL(NO_PAD_CTRL),
/* pin 28 - 1 - (MODE2) all */
- MX6Q_PAD_RGMII_RD2__GPIO_6_28 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_RGMII_RD2__GPIO_6_28 | MUX_PAD_CTRL(NO_PAD_CTRL),
/* pin 27 - 1 - (MODE3) all */
- MX6Q_PAD_RGMII_RD3__GPIO_6_29 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_RGMII_RD3__GPIO_6_29 | MUX_PAD_CTRL(NO_PAD_CTRL),
/* pin 33 - 1 - (CLK125_EN) 125Mhz clockout enabled */
- MX6Q_PAD_RGMII_RX_CTL__GPIO_6_24 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_RGMII_RX_CTL__GPIO_6_24 | MUX_PAD_CTRL(NO_PAD_CTRL),
/* pin 42 PHY nRST */
- MX6Q_PAD_EIM_D23__GPIO_3_23 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_EIM_D23__GPIO_3_23 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
iomux_v3_cfg_t const enet_pads2[] = {
- MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD2__ENET_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD3__ENET_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
};
/* Button assignments for J14 */
static iomux_v3_cfg_t const button_pads[] = {
/* Menu */
- MX6Q_PAD_NANDF_D1__GPIO_2_1 | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
+ MX6_PAD_NANDF_D1__GPIO_2_1 | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
/* Back */
- MX6Q_PAD_NANDF_D2__GPIO_2_2 | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
+ MX6_PAD_NANDF_D2__GPIO_2_2 | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
/* Labelled Search (mapped to Power under Android) */
- MX6Q_PAD_NANDF_D3__GPIO_2_3 | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
+ MX6_PAD_NANDF_D3__GPIO_2_3 | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
/* Home */
- MX6Q_PAD_NANDF_D4__GPIO_2_4 | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
+ MX6_PAD_NANDF_D4__GPIO_2_4 | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
/* Volume Down */
- MX6Q_PAD_GPIO_19__GPIO_4_5 | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
+ MX6_PAD_GPIO_19__GPIO_4_5 | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
/* Volume Up */
- MX6Q_PAD_GPIO_18__GPIO_7_13 | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
+ MX6_PAD_GPIO_18__GPIO_7_13 | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
};
static void setup_iomux_enet(void)
@@ -221,13 +221,13 @@ static void setup_iomux_enet(void)
}
iomux_v3_cfg_t const usb_pads[] = {
- MX6Q_PAD_GPIO_17__GPIO_7_12 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_GPIO_17__GPIO_7_12 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
static void setup_iomux_uart(void)
{
imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
- imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
+ imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
}
#ifdef CONFIG_USB_EHCI_MX6
@@ -246,55 +246,55 @@ int board_ehci_hcd_init(int port)
#ifdef CONFIG_FSL_ESDHC
struct fsl_esdhc_cfg usdhc_cfg[2] = {
- {USDHC3_BASE_ADDR},
- {USDHC4_BASE_ADDR},
+ {USDHC3_BASE_ADDR},
+ {USDHC4_BASE_ADDR},
};
int board_mmc_getcd(struct mmc *mmc)
{
- struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
- int ret;
+ struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ int ret;
- if (cfg->esdhc_base == USDHC3_BASE_ADDR) {
+ if (cfg->esdhc_base == USDHC3_BASE_ADDR) {
gpio_direction_input(IMX_GPIO_NR(7, 0));
ret = !gpio_get_value(IMX_GPIO_NR(7, 0));
- } else {
+ } else {
gpio_direction_input(IMX_GPIO_NR(2, 6));
ret = !gpio_get_value(IMX_GPIO_NR(2, 6));
- }
+ }
- return ret;
+ return ret;
}
int board_mmc_init(bd_t *bis)
{
- s32 status = 0;
- u32 index = 0;
+ s32 status = 0;
+ u32 index = 0;
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
- for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) {
- switch (index) {
- case 0:
- imx_iomux_v3_setup_multiple_pads(
- usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
- break;
- case 1:
- imx_iomux_v3_setup_multiple_pads(
- usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
+ for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) {
+ switch (index) {
+ case 0:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+ break;
+ case 1:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
break;
default:
- printf("Warning: you configured more USDHC controllers"
+ printf("Warning: you configured more USDHC controllers"
"(%d) then supported by the board (%d)\n",
index + 1, CONFIG_SYS_FSL_USDHC_NUM);
- return status;
- }
+ return status;
+ }
- status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
- }
+ status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
+ }
- return status;
+ return status;
}
#endif
@@ -306,10 +306,10 @@ u32 get_board_rev(void)
#ifdef CONFIG_MXC_SPI
iomux_v3_cfg_t const ecspi1_pads[] = {
/* SS1 */
- MX6Q_PAD_EIM_D19__GPIO_3_19 | MUX_PAD_CTRL(SPI_PAD_CTRL),
- MX6Q_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
- MX6Q_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
- MX6Q_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
+ MX6_PAD_EIM_D19__GPIO_3_19 | MUX_PAD_CTRL(SPI_PAD_CTRL),
+ MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
+ MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
+ MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
};
void setup_spi(void)
@@ -403,44 +403,44 @@ int setup_sata(void)
static iomux_v3_cfg_t const backlight_pads[] = {
/* Backlight on RGB connector: J15 */
- MX6Q_PAD_SD1_DAT3__GPIO_1_21 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_SD1_DAT3__GPIO_1_21 | MUX_PAD_CTRL(NO_PAD_CTRL),
#define RGB_BACKLIGHT_GP IMX_GPIO_NR(1, 21)
/* Backlight on LVDS connector: J6 */
- MX6Q_PAD_SD1_CMD__GPIO_1_18 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_SD1_CMD__GPIO_1_18 | MUX_PAD_CTRL(NO_PAD_CTRL),
#define LVDS_BACKLIGHT_GP IMX_GPIO_NR(1, 18)
};
static iomux_v3_cfg_t const rgb_pads[] = {
- MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK,
- MX6Q_PAD_DI0_PIN15__IPU1_DI0_PIN15,
- MX6Q_PAD_DI0_PIN2__IPU1_DI0_PIN2,
- MX6Q_PAD_DI0_PIN3__IPU1_DI0_PIN3,
- MX6Q_PAD_DI0_PIN4__GPIO_4_20,
- MX6Q_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0,
- MX6Q_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1,
- MX6Q_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2,
- MX6Q_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3,
- MX6Q_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4,
- MX6Q_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5,
- MX6Q_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6,
- MX6Q_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7,
- MX6Q_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8,
- MX6Q_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9,
- MX6Q_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10,
- MX6Q_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11,
- MX6Q_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12,
- MX6Q_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13,
- MX6Q_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14,
- MX6Q_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15,
- MX6Q_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16,
- MX6Q_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17,
- MX6Q_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18,
- MX6Q_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19,
- MX6Q_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20,
- MX6Q_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21,
- MX6Q_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22,
- MX6Q_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23,
+ MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK,
+ MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15,
+ MX6_PAD_DI0_PIN2__IPU1_DI0_PIN2,
+ MX6_PAD_DI0_PIN3__IPU1_DI0_PIN3,
+ MX6_PAD_DI0_PIN4__GPIO_4_20,
+ MX6_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0,
+ MX6_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1,
+ MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2,
+ MX6_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3,
+ MX6_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4,
+ MX6_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5,
+ MX6_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6,
+ MX6_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7,
+ MX6_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8,
+ MX6_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9,
+ MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10,
+ MX6_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11,
+ MX6_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12,
+ MX6_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13,
+ MX6_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14,
+ MX6_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15,
+ MX6_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16,
+ MX6_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17,
+ MX6_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18,
+ MX6_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19,
+ MX6_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20,
+ MX6_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21,
+ MX6_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22,
+ MX6_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23,
};
struct display_info_t {
@@ -455,32 +455,26 @@ struct display_info_t {
static int detect_hdmi(struct display_info_t const *dev)
{
- return __raw_readb(HDMI_ARB_BASE_ADDR+HDMI_PHY_STAT0) & HDMI_PHY_HPD;
+ struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
+ return readb(&hdmi->phy_stat0) & HDMI_PHY_HPD;
}
static void enable_hdmi(struct display_info_t const *dev)
{
+ struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
u8 reg;
printf("%s: setup HDMI monitor\n", __func__);
- reg = __raw_readb(
- HDMI_ARB_BASE_ADDR
- +HDMI_PHY_CONF0);
+ reg = readb(&hdmi->phy_conf0);
reg |= HDMI_PHY_CONF0_PDZ_MASK;
- __raw_writeb(reg,
- HDMI_ARB_BASE_ADDR
- +HDMI_PHY_CONF0);
+ writeb(reg, &hdmi->phy_conf0);
+
udelay(3000);
reg |= HDMI_PHY_CONF0_ENTMDS_MASK;
- __raw_writeb(reg,
- HDMI_ARB_BASE_ADDR
- +HDMI_PHY_CONF0);
+ writeb(reg, &hdmi->phy_conf0);
udelay(3000);
reg |= HDMI_PHY_CONF0_GEN2_TXPWRON_MASK;
- __raw_writeb(reg,
- HDMI_ARB_BASE_ADDR
- +HDMI_PHY_CONF0);
- __raw_writeb(HDMI_MC_PHYRSTZ_ASSERT,
- HDMI_ARB_BASE_ADDR+HDMI_MC_PHYRSTZ);
+ writeb(reg, &hdmi->phy_conf0);
+ writeb(HDMI_MC_PHYRSTZ_ASSERT, &hdmi->mc_phyrstz);
}
static int detect_i2c(struct display_info_t const *dev)
@@ -638,6 +632,7 @@ static void setup_display(void)
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
+ struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
int reg;
@@ -654,8 +649,7 @@ static void setup_display(void)
writel(reg, &mxc_ccm->CCGR2);
/* clear HDMI PHY reset */
- __raw_writeb(HDMI_MC_PHYRSTZ_DEASSERT,
- HDMI_ARB_BASE_ADDR+HDMI_MC_PHYRSTZ);
+ writeb(HDMI_MC_PHYRSTZ_DEASSERT, &hdmi->mc_phyrstz);
/* set PFD1_FRAC to 0x13 == 455 MHz (480*18)/0x13 */
writel(ANATOP_PFD_480_PFD1_FRAC_MASK, &anatop->pfd_480_clr);
@@ -732,8 +726,8 @@ int overwrite_console(void)
int board_init(void)
{
- /* address of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
#ifdef CONFIG_MXC_SPI
setup_spi();
@@ -746,14 +740,14 @@ int board_init(void)
setup_sata();
#endif
- return 0;
+ return 0;
}
int checkboard(void)
{
- puts("Board: MX6Q-Sabre Lite\n");
+ puts("Board: MX6Q-Sabre Lite\n");
- return 0;
+ return 0;
}
struct button_key {
diff --git a/board/freescale/mx6qsabresd/mx6qsabresd.c b/board/freescale/mx6qsabresd/mx6qsabresd.c
index 65c4a1a..2b3926a 100644
--- a/board/freescale/mx6qsabresd/mx6qsabresd.c
+++ b/board/freescale/mx6qsabresd/mx6qsabresd.c
@@ -22,7 +22,7 @@
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/iomux.h>
-#include <asm/arch/mx6x_pins.h>
+#include <asm/arch/mx6q_pins.h>
#include <asm/errno.h>
#include <asm/gpio.h>
#include <asm/imx-common/iomux-v3.h>
@@ -52,28 +52,28 @@ int dram_init(void)
}
iomux_v3_cfg_t const uart1_pads[] = {
- MX6Q_PAD_CSI0_DAT10__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
- MX6Q_PAD_CSI0_DAT11__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_CSI0_DAT10__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_CSI0_DAT11__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
};
iomux_v3_cfg_t const enet_pads[] = {
- MX6Q_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD2__ENET_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD3__ENET_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
/* AR8031 PHY Reset */
- MX6Q_PAD_ENET_CRS_DV__GPIO_1_25 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_ENET_CRS_DV__GPIO_1_25 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
static void setup_iomux_enet(void)
@@ -87,44 +87,44 @@ static void setup_iomux_enet(void)
}
iomux_v3_cfg_t const usdhc2_pads[] = {
- MX6Q_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD2_DAT0__USDHC2_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD2_DAT1__USDHC2_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD2_DAT2__USDHC2_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD2_DAT3__USDHC2_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_NANDF_D4__USDHC2_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_NANDF_D5__USDHC2_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_NANDF_D6__USDHC2_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_NANDF_D7__USDHC2_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_NANDF_D2__GPIO_2_2 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
+ MX6_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DAT0__USDHC2_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DAT1__USDHC2_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DAT2__USDHC2_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DAT3__USDHC2_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NANDF_D4__USDHC2_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NANDF_D5__USDHC2_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NANDF_D6__USDHC2_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NANDF_D7__USDHC2_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NANDF_D2__GPIO_2_2 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
};
iomux_v3_cfg_t const usdhc3_pads[] = {
- MX6Q_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_NANDF_D0__GPIO_2_0 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
+ MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT4__USDHC3_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT5__USDHC3_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT6__USDHC3_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT7__USDHC3_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NANDF_D0__GPIO_2_0 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
};
iomux_v3_cfg_t const usdhc4_pads[] = {
- MX6Q_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT1__USDHC4_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT2__USDHC4_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT3__USDHC4_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT4__USDHC4_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT5__USDHC4_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT6__USDHC4_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT7__USDHC4_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
};
static void setup_iomux_uart(void)
diff --git a/board/gaisler/gr_cpci_ax2000/u-boot.lds b/board/gaisler/gr_cpci_ax2000/u-boot.lds
index 70ebf4d..60039cc 100644
--- a/board/gaisler/gr_cpci_ax2000/u-boot.lds
+++ b/board/gaisler/gr_cpci_ax2000/u-boot.lds
@@ -88,7 +88,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
.data :
diff --git a/board/gaisler/gr_ep2s60/u-boot.lds b/board/gaisler/gr_ep2s60/u-boot.lds
index 429b579..ec73f73 100644
--- a/board/gaisler/gr_ep2s60/u-boot.lds
+++ b/board/gaisler/gr_ep2s60/u-boot.lds
@@ -88,7 +88,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
.data :
diff --git a/board/gaisler/gr_xc3s_1500/u-boot.lds b/board/gaisler/gr_xc3s_1500/u-boot.lds
index 7052129..18dfb81 100644
--- a/board/gaisler/gr_xc3s_1500/u-boot.lds
+++ b/board/gaisler/gr_xc3s_1500/u-boot.lds
@@ -88,7 +88,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
.data :
diff --git a/board/gaisler/grsim/u-boot.lds b/board/gaisler/grsim/u-boot.lds
index c608284..8de272e 100644
--- a/board/gaisler/grsim/u-boot.lds
+++ b/board/gaisler/grsim/u-boot.lds
@@ -87,7 +87,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
.data :
diff --git a/board/gaisler/grsim_leon2/u-boot.lds b/board/gaisler/grsim_leon2/u-boot.lds
index eafb4f0..e57f734 100644
--- a/board/gaisler/grsim_leon2/u-boot.lds
+++ b/board/gaisler/grsim_leon2/u-boot.lds
@@ -87,7 +87,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
.data :
diff --git a/board/gen860t/u-boot-flashenv.lds b/board/gen860t/u-boot-flashenv.lds
index f5c757e..30138dd 100644
--- a/board/gen860t/u-boot-flashenv.lds
+++ b/board/gen860t/u-boot-flashenv.lds
@@ -73,7 +73,7 @@ SECTIONS
. = .;
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/gen860t/u-boot.lds b/board/gen860t/u-boot.lds
index d2649a8..08fb4aa 100644
--- a/board/gen860t/u-boot.lds
+++ b/board/gen860t/u-boot.lds
@@ -74,7 +74,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/genietv/u-boot.lds b/board/genietv/u-boot.lds
index 15575e4..b351a68 100644
--- a/board/genietv/u-boot.lds
+++ b/board/genietv/u-boot.lds
@@ -83,7 +83,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/genietv/u-boot.lds.debug b/board/genietv/u-boot.lds.debug
index e1cf249..a3aeb60 100644
--- a/board/genietv/u-boot.lds.debug
+++ b/board/genietv/u-boot.lds.debug
@@ -110,7 +110,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/hermes/u-boot.lds b/board/hermes/u-boot.lds
index d2a2f22..8e58963 100644
--- a/board/hermes/u-boot.lds
+++ b/board/hermes/u-boot.lds
@@ -75,7 +75,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/hermes/u-boot.lds.debug b/board/hermes/u-boot.lds.debug
index e84cc79..4383c49 100644
--- a/board/hermes/u-boot.lds.debug
+++ b/board/hermes/u-boot.lds.debug
@@ -109,7 +109,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/htkw/mcx/mcx.c b/board/htkw/mcx/mcx.c
index 9fe6408..923461a 100644
--- a/board/htkw/mcx/mcx.c
+++ b/board/htkw/mcx/mcx.c
@@ -114,7 +114,7 @@ void set_muxconf_regs(void)
#if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
- return omap_mmc_init(0, 0, 0);
+ return omap_mmc_init(0, 0, 0, -1, -1);
}
#endif
@@ -130,6 +130,7 @@ static struct panel_config lcd_cfg = {
.load_mode = 0x02, /* Frame Mode */
.panel_color = 0,
.lcd_size = PANEL_LCD_SIZE(800, 480),
+ .gfx_format = GFXFORMAT_RGB24_UNPACKED,
};
int board_video_init(void)
diff --git a/board/hymod/u-boot.lds b/board/hymod/u-boot.lds
index c9f0f37..5d1c2ad 100644
--- a/board/hymod/u-boot.lds
+++ b/board/hymod/u-boot.lds
@@ -113,7 +113,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/hymod/u-boot.lds.debug b/board/hymod/u-boot.lds.debug
index dc8c4e9..e88bd97 100644
--- a/board/hymod/u-boot.lds.debug
+++ b/board/hymod/u-boot.lds.debug
@@ -109,7 +109,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/icu862/u-boot.lds b/board/icu862/u-boot.lds
index 9ff187c..6e4939b 100644
--- a/board/icu862/u-boot.lds
+++ b/board/icu862/u-boot.lds
@@ -69,7 +69,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/icu862/u-boot.lds.debug b/board/icu862/u-boot.lds.debug
index 3e075a8..9995288 100644
--- a/board/icu862/u-boot.lds.debug
+++ b/board/icu862/u-boot.lds.debug
@@ -110,7 +110,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/idmr/u-boot.lds b/board/idmr/u-boot.lds
index fd77fa9..5b8d3b3 100644
--- a/board/idmr/u-boot.lds
+++ b/board/idmr/u-boot.lds
@@ -68,7 +68,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/ip860/u-boot.lds b/board/ip860/u-boot.lds
index a507d73..3334a44 100644
--- a/board/ip860/u-boot.lds
+++ b/board/ip860/u-boot.lds
@@ -69,7 +69,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/ip860/u-boot.lds.debug b/board/ip860/u-boot.lds.debug
index e47aff0..0b34177 100644
--- a/board/ip860/u-boot.lds.debug
+++ b/board/ip860/u-boot.lds.debug
@@ -110,7 +110,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c
index 49fcf34..2bac916 100644
--- a/board/isee/igep00x0/igep00x0.c
+++ b/board/isee/igep00x0/igep00x0.c
@@ -150,8 +150,7 @@ static inline void setup_net_chip(void) {}
#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0, 0, 0);
- return 0;
+ return omap_mmc_init(0, 0, 0, -1, -1);
}
#endif
diff --git a/board/isee/igep00x0/igep00x0.h b/board/isee/igep00x0/igep00x0.h
index ea1e9ac..5ef22ae 100644
--- a/board/isee/igep00x0/igep00x0.h
+++ b/board/isee/igep00x0/igep00x0.h
@@ -34,10 +34,13 @@
const omap3_sysinfo sysinfo = {
DDR_STACKED,
#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
- "OMAP3 IGEP v2 board",
+ "IGEPv2",
#endif
#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
- "OMAP3 IGEP COM Module",
+ "IGEP COM MODULE/ELECTRON",
+#endif
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032)
+ "IGEP COM PROTON",
#endif
#if defined(CONFIG_ENV_IS_IN_ONENAND)
"ONENAND",
diff --git a/board/ivm/u-boot.lds b/board/ivm/u-boot.lds
index 838c07b..1b43dbe 100644
--- a/board/ivm/u-boot.lds
+++ b/board/ivm/u-boot.lds
@@ -69,7 +69,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/ivm/u-boot.lds.debug b/board/ivm/u-boot.lds.debug
index 53a19b2..bae9fb2 100644
--- a/board/ivm/u-boot.lds.debug
+++ b/board/ivm/u-boot.lds.debug
@@ -110,7 +110,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/korat/u-boot-F7FC.lds b/board/korat/u-boot-F7FC.lds
index 90d2135..52c929c 100644
--- a/board/korat/u-boot-F7FC.lds
+++ b/board/korat/u-boot-F7FC.lds
@@ -110,7 +110,7 @@ SECTIONS
. = .;
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/kup/kup4k/u-boot.lds b/board/kup/kup4k/u-boot.lds
index a507d73..3334a44 100644
--- a/board/kup/kup4k/u-boot.lds
+++ b/board/kup/kup4k/u-boot.lds
@@ -69,7 +69,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/kup/kup4k/u-boot.lds.debug b/board/kup/kup4k/u-boot.lds.debug
index b43a1e4..88c410c 100644
--- a/board/kup/kup4k/u-boot.lds.debug
+++ b/board/kup/kup4k/u-boot.lds.debug
@@ -109,7 +109,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/kup/kup4x/u-boot.lds b/board/kup/kup4x/u-boot.lds
index a507d73..3334a44 100644
--- a/board/kup/kup4x/u-boot.lds
+++ b/board/kup/kup4x/u-boot.lds
@@ -69,7 +69,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/kup/kup4x/u-boot.lds.debug b/board/kup/kup4x/u-boot.lds.debug
index b43a1e4..88c410c 100644
--- a/board/kup/kup4x/u-boot.lds.debug
+++ b/board/kup/kup4x/u-boot.lds.debug
@@ -109,7 +109,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/logicpd/am3517evm/am3517evm.c b/board/logicpd/am3517evm/am3517evm.c
index 0b3721e..65e1b78 100644
--- a/board/logicpd/am3517evm/am3517evm.c
+++ b/board/logicpd/am3517evm/am3517evm.c
@@ -135,8 +135,7 @@ void set_muxconf_regs(void)
#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0, 0, 0);
- return 0;
+ return omap_mmc_init(0, 0, 0, -1, -1);
}
#endif
diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c
index 12bcfcb..6e83aa2 100644
--- a/board/logicpd/omap3som/omap3logic.c
+++ b/board/logicpd/omap3som/omap3logic.c
@@ -140,7 +140,7 @@ int board_init(void)
#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
- return omap_mmc_init(0, 0, 0);
+ return omap_mmc_init(0, 0, 0, -1, -1);
}
#endif
diff --git a/board/logicpd/zoom1/zoom1.c b/board/logicpd/zoom1/zoom1.c
index 90b6b0f..c79a261 100644
--- a/board/logicpd/zoom1/zoom1.c
+++ b/board/logicpd/zoom1/zoom1.c
@@ -92,8 +92,7 @@ void set_muxconf_regs(void)
#ifdef CONFIG_GENERIC_MMC
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0, 0, 0);
- return 0;
+ return omap_mmc_init(0, 0, 0, -1, -1);
}
#endif
diff --git a/board/logicpd/zoom2/zoom2.c b/board/logicpd/zoom2/zoom2.c
index 8e18019..ad6ae36 100644
--- a/board/logicpd/zoom2/zoom2.c
+++ b/board/logicpd/zoom2/zoom2.c
@@ -183,8 +183,7 @@ void set_muxconf_regs (void)
#ifdef CONFIG_GENERIC_MMC
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0, 0, 0);
- return 0;
+ return omap_mmc_init(0, 0, 0, -1, -1);
}
#endif
diff --git a/board/lwmon/u-boot.lds b/board/lwmon/u-boot.lds
index 279605b..ce11a91 100644
--- a/board/lwmon/u-boot.lds
+++ b/board/lwmon/u-boot.lds
@@ -69,7 +69,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/lwmon/u-boot.lds.debug b/board/lwmon/u-boot.lds.debug
index 0a3e646..1d1b76a 100644
--- a/board/lwmon/u-boot.lds.debug
+++ b/board/lwmon/u-boot.lds.debug
@@ -110,7 +110,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/manroland/uc100/u-boot.lds b/board/manroland/uc100/u-boot.lds
index ac6af1a..d1bb127 100644
--- a/board/manroland/uc100/u-boot.lds
+++ b/board/manroland/uc100/u-boot.lds
@@ -72,7 +72,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/matrix_vision/mvblx/fpga.c b/board/matrix_vision/mvblx/fpga.c
index dacc138..3fcf968 100644
--- a/board/matrix_vision/mvblx/fpga.c
+++ b/board/matrix_vision/mvblx/fpga.c
@@ -31,6 +31,7 @@
#include <ACEX1K.h>
#include <command.h>
#include <asm/gpio.h>
+#include <linux/byteorder/generic.h>
#include "fpga.h"
#ifdef FPGA_DEBUG
@@ -209,9 +210,20 @@ int fpga_wr_fn(const void *buf, size_t len, int flush, int cookie)
{
unsigned char *data = (unsigned char *) buf;
int i;
+ int headerlen = len - cyclone2.size;
+
+ if (headerlen < 0)
+ return FPGA_FAIL;
+ else if (headerlen == sizeof(uint32_t)) {
+ const unsigned int fpgavers_len = 11; /* '0x' + 8 hex digits + \0 */
+ char fpgavers_str[fpgavers_len];
+ snprintf(fpgavers_str, fpgavers_len, "0x%08x",
+ be32_to_cpup((uint32_t*)data));
+ setenv("fpgavers", fpgavers_str);
+ }
fpga_debug("fpga_wr: buf %p / size %d\n", buf, len);
- for (i = 0; i < len; i++)
+ for (i = headerlen; i < len; i++)
_write_fpga(data[i]);
fpga_debug("-%s\n", __func__);
diff --git a/board/matrix_vision/mvblx/mvblx.c b/board/matrix_vision/mvblx/mvblx.c
index f68f312..49af384 100644
--- a/board/matrix_vision/mvblx/mvblx.c
+++ b/board/matrix_vision/mvblx/mvblx.c
@@ -106,8 +106,8 @@ void set_muxconf_regs(void)
#ifdef CONFIG_GENERIC_MMC
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0, 0, 0);
- omap_mmc_init(1, 0, 0);
+ omap_mmc_init(0, 0, 0, -1, -1);
+ omap_mmc_init(1, 0, 0, -1, -1);
return 0;
}
#endif
diff --git a/board/matrix_vision/mvblx/sys_eeprom.c b/board/matrix_vision/mvblx/sys_eeprom.c
index 945a36d..15269c6 100644
--- a/board/matrix_vision/mvblx/sys_eeprom.c
+++ b/board/matrix_vision/mvblx/sys_eeprom.c
@@ -326,10 +326,28 @@ int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
return 0;
}
+static inline int is_portrait(void)
+{
+ int i;
+ unsigned int orient_index = 0; /* idx of char which determines orientation */
+
+ for (i = sizeof(e.id)/sizeof(*e.id) - 1; i>=0; i--) {
+ if (e.id[i] == '-') {
+ orient_index = i+1;
+ break;
+ }
+ }
+
+ return (orient_index &&
+ (e.id[orient_index] >= '5') && (e.id[orient_index] <= '8'));
+}
+
int mac_read_from_eeprom(void)
{
u32 crc, crc_offset = offsetof(struct eeprom, crc);
u32 *crcp; /* Pointer to the CRC in the data read from the EEPROM */
+#define FILENAME_LANDSCAPE "mvBlueLynx_X.rbf"
+#define FILENAME_PORTRAIT "mvBlueLynx_X_sensor_cd.rbf"
if (read_eeprom()) {
printf("EEPROM Read failed.\n");
@@ -374,6 +392,12 @@ int mac_read_from_eeprom(void)
setenv("serial#", serial_num);
}
+ /* decide which fpga file to load depending on orientation */
+ if (is_portrait())
+ setenv("fpgafilename", FILENAME_PORTRAIT);
+ else
+ setenv("fpgafilename", FILENAME_LANDSCAPE);
+
/* TODO should I calculate CRC here? */
return 0;
}
diff --git a/board/matrix_vision/mvsmr/u-boot.lds b/board/matrix_vision/mvsmr/u-boot.lds
index 4c464d1..3225c0b 100644
--- a/board/matrix_vision/mvsmr/u-boot.lds
+++ b/board/matrix_vision/mvsmr/u-boot.lds
@@ -77,7 +77,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/mbx8xx/u-boot.lds b/board/mbx8xx/u-boot.lds
index a507d73..3334a44 100644
--- a/board/mbx8xx/u-boot.lds
+++ b/board/mbx8xx/u-boot.lds
@@ -69,7 +69,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/mbx8xx/u-boot.lds.debug b/board/mbx8xx/u-boot.lds.debug
index 4155b60..063f2cc 100644
--- a/board/mbx8xx/u-boot.lds.debug
+++ b/board/mbx8xx/u-boot.lds.debug
@@ -110,7 +110,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/mousse/u-boot.lds b/board/mousse/u-boot.lds
index 0bcf2ee..17ff94e 100644
--- a/board/mousse/u-boot.lds
+++ b/board/mousse/u-boot.lds
@@ -63,7 +63,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/mpl/pip405/u-boot.lds.debug b/board/mpl/pip405/u-boot.lds.debug
index d7a2e56..99cbed4 100644
--- a/board/mpl/pip405/u-boot.lds.debug
+++ b/board/mpl/pip405/u-boot.lds.debug
@@ -109,7 +109,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/mvblue/u-boot.lds b/board/mvblue/u-boot.lds
index cb4a07c..adbb5f9 100644
--- a/board/mvblue/u-boot.lds
+++ b/board/mvblue/u-boot.lds
@@ -73,7 +73,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/netphone/u-boot.lds b/board/netphone/u-boot.lds
index e63a8c9..03891e9 100644
--- a/board/netphone/u-boot.lds
+++ b/board/netphone/u-boot.lds
@@ -69,7 +69,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/netphone/u-boot.lds.debug b/board/netphone/u-boot.lds.debug
index 900da64..e1fe052 100644
--- a/board/netphone/u-boot.lds.debug
+++ b/board/netphone/u-boot.lds.debug
@@ -109,7 +109,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/netta/u-boot.lds b/board/netta/u-boot.lds
index e63a8c9..03891e9 100644
--- a/board/netta/u-boot.lds
+++ b/board/netta/u-boot.lds
@@ -69,7 +69,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/netta/u-boot.lds.debug b/board/netta/u-boot.lds.debug
index 900da64..e1fe052 100644
--- a/board/netta/u-boot.lds.debug
+++ b/board/netta/u-boot.lds.debug
@@ -109,7 +109,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/netta2/u-boot.lds b/board/netta2/u-boot.lds
index e63a8c9..03891e9 100644
--- a/board/netta2/u-boot.lds
+++ b/board/netta2/u-boot.lds
@@ -69,7 +69,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/netta2/u-boot.lds.debug b/board/netta2/u-boot.lds.debug
index 900da64..e1fe052 100644
--- a/board/netta2/u-boot.lds.debug
+++ b/board/netta2/u-boot.lds.debug
@@ -109,7 +109,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/netvia/u-boot.lds b/board/netvia/u-boot.lds
index e63a8c9..03891e9 100644
--- a/board/netvia/u-boot.lds
+++ b/board/netvia/u-boot.lds
@@ -69,7 +69,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/netvia/u-boot.lds.debug b/board/netvia/u-boot.lds.debug
index 6cbf4dc..3243fc0 100644
--- a/board/netvia/u-boot.lds.debug
+++ b/board/netvia/u-boot.lds.debug
@@ -109,7 +109,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/nokia/rx51/rx51.c b/board/nokia/rx51/rx51.c
index b2fe1c5..48eb65f 100644
--- a/board/nokia/rx51/rx51.c
+++ b/board/nokia/rx51/rx51.c
@@ -671,7 +671,7 @@ int rx51_kp_getc(void)
*/
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0, 0, 0);
- omap_mmc_init(1, 0, 0);
+ omap_mmc_init(0, 0, 0, -1, -1);
+ omap_mmc_init(1, 0, 0, -1, -1);
return 0;
}
diff --git a/board/ns9750dev/config.mk b/board/ns9750dev/config.mk
deleted file mode 100644
index e5d8702..0000000
--- a/board/ns9750dev/config.mk
+++ /dev/null
@@ -1,16 +0,0 @@
-#######################################################################
-#
-# Copyright (C) 2004 by FS Forth-Systeme GmbH.
-# Markus Pietrek <mpietrek@fsforth.de>
-#
-# @TODO
-# Linux-Kernel is expected to be at 0000'8000, entry 0000'8000
-# optionally with a ramdisk at 0080'0000
-#
-# we load ourself to 0078'0000
-#
-# download area is 0060'0000
-#
-
-
-CONFIG_SYS_TEXT_BASE = 0x00780000
diff --git a/board/ns9750dev/flash.c b/board/ns9750dev/flash.c
deleted file mode 100644
index 185bc2d..0000000
--- a/board/ns9750dev/flash.c
+++ /dev/null
@@ -1,474 +0,0 @@
-/*
- * (C) Copyright 2001
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <linux/byteorder/swab.h>
-
-#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 256 KB sectors (x2) */
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/* Board support for 1 or 2 flash devices */
-#undef FLASH_PORT_WIDTH32
-#define FLASH_PORT_WIDTH16
-
-#ifdef FLASH_PORT_WIDTH16
-#define FLASH_PORT_WIDTH ushort
-#define FLASH_PORT_WIDTHV vu_short
-#define SWAP(x) __swab16(x)
-#else
-#define FLASH_PORT_WIDTH ulong
-#define FLASH_PORT_WIDTHV vu_long
-#define SWAP(x) __swab32(x)
-#endif
-
-#define FPW FLASH_PORT_WIDTH
-#define FPWV FLASH_PORT_WIDTHV
-
-#define mb() __asm__ __volatile__ ("" : : : "memory")
-
-
-/* Flash Organization Structure */
-typedef struct OrgDef {
- unsigned int sector_number;
- unsigned int sector_size;
-} OrgDef;
-
-
-/* Flash Organizations */
-OrgDef OrgIntel_28F256L18T[] = {
- {4, 32 * 1024}, /* 4 * 32kBytes sectors */
- {255, 128 * 1024}, /* 255 * 128kBytes sectors */
-};
-
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-unsigned long flash_init (void);
-static ulong flash_get_size (FPW * addr, flash_info_t * info);
-static int write_data (flash_info_t * info, ulong dest, FPW data);
-static void flash_get_offsets (ulong base, flash_info_t * info);
-void inline spin_wheel (void);
-void flash_print_info (flash_info_t * info);
-void flash_unprotect_sectors (FPWV * addr);
-int flash_erase (flash_info_t * info, int s_first, int s_last);
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- int i;
- ulong size = 0;
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- switch (i) {
- case 0:
- flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
- flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
- break;
- default:
- panic ("configured too many flash banks!\n");
- break;
- }
- size += flash_info[i].size;
- }
-
- /* Protect monitor and environment sectors
- */
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]);
-
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t * info)
-{
- int i;
- OrgDef *pOrgDef;
-
- pOrgDef = OrgIntel_28F256L18T;
- if (info->flash_id == FLASH_UNKNOWN) {
- return;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
- for (i = 0; i < info->sector_count; i++) {
- if (i > 255) {
- info->start[i] = base + (i * 0x8000);
- info->protect[i] = 0;
- } else {
- info->start[i] = base +
- (i * PHYS_FLASH_SECT_SIZE);
- info->protect[i] = 0;
- }
- }
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_INTEL:
- printf ("INTEL ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_28F256L18T:
- printf ("FLASH 28F256L18T\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i], info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
- return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (FPW * addr, flash_info_t * info)
-{
- volatile FPW value;
-
- /* Write auto select command: read Manufacturer ID */
- addr[0x5555] = (FPW) 0x00AA00AA;
- addr[0x2AAA] = (FPW) 0x00550055;
- addr[0x5555] = (FPW) 0x00900090;
-
- mb ();
- value = addr[0];
-
- switch (value) {
-
- case (FPW) INTEL_MANUFACT:
- info->flash_id = FLASH_MAN_INTEL;
- break;
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
- return (0); /* no or unknown flash */
- }
-
- mb ();
- value = addr[1]; /* device ID */
- switch (value) {
-
- case (FPW) (INTEL_ID_28F256L18T):
- info->flash_id += FLASH_28F256L18T;
- info->sector_count = 259;
- info->size = 0x02000000;
- break; /* => 32 MB */
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- break;
- }
-
- if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
- printf ("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
- info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- }
-
- addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
-
- return (info->size);
-}
-
-
-/* unprotects a sector for write and erase
- * on some intel parts, this unprotects the entire chip, but it
- * wont hurt to call this additional times per sector...
- */
-void flash_unprotect_sectors (FPWV * addr)
-{
-#define PD_FINTEL_WSMS_READY_MASK 0x0080
-
- *addr = (FPW) 0x00500050; /* clear status register */
-
- /* this sends the clear lock bit command */
- *addr = (FPW) 0x00600060;
- *addr = (FPW) 0x00D000D0;
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- int flag, prot, sect;
- ulong type, start;
- int rcode = 0;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- type = (info->flash_id & FLASH_VENDMASK);
- if ((type != FLASH_MAN_INTEL)) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- FPWV *addr = (FPWV *) (info->start[sect]);
- FPW status;
-
- printf ("Erasing sector %2d ... ", sect);
-
- flash_unprotect_sectors (addr);
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- *addr = (FPW) 0x00500050;/* clear status register */
- *addr = (FPW) 0x00200020;/* erase setup */
- *addr = (FPW) 0x00D000D0;/* erase confirm */
-
- while (((status =
- *addr) & (FPW) 0x00800080) !=
- (FPW) 0x00800080) {
- if (get_timer(start) >
- CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- /* suspend erase */
- *addr = (FPW) 0x00B000B0;
- /* reset to read mode */
- *addr = (FPW) 0x00FF00FF;
- rcode = 1;
- break;
- }
- }
-
- /* clear status register cmd. */
- *addr = (FPW) 0x00500050;
- *addr = (FPW) 0x00FF00FF;/* resest to read mode */
- printf (" done\n");
- }
- }
- return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp;
- FPW data;
- int count, i, l, rc, port_width;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- return 4;
- }
-/* get lower word aligned address */
-#ifdef FLASH_PORT_WIDTH16
- wp = (addr & ~1);
- port_width = 2;
-#else
- wp = (addr & ~3);
- port_width = 4;
-#endif
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
- for (; i < port_width && cnt > 0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < port_width; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- if ((rc = write_data (info, wp, SWAP (data))) != 0) {
- return (rc);
- }
- wp += port_width;
- }
-
- /*
- * handle word aligned part
- */
- count = 0;
- while (cnt >= port_width) {
- data = 0;
- for (i = 0; i < port_width; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_data (info, wp, SWAP (data))) != 0) {
- return (rc);
- }
- wp += port_width;
- cnt -= port_width;
- if (count++ > 0x800) {
- spin_wheel ();
- count = 0;
- }
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i < port_width; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- return (write_data (info, wp, SWAP (data)));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word or halfword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data (flash_info_t * info, ulong dest, FPW data)
-{
- FPWV *addr = (FPWV *) dest;
- ulong status;
- int flag;
- ulong start;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*addr & data) != data) {
- printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
- return (2);
- }
- flash_unprotect_sectors (addr);
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
- *addr = (FPW) 0x00400040; /* write setup */
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- /* wait while polling the status register */
- while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- *addr = (FPW) 0x00FF00FF; /* restore read mode */
- return (1);
- }
- }
- *addr = (FPW) 0x00FF00FF; /* restore read mode */
- return (0);
-}
-
-void inline spin_wheel (void)
-{
- static int p = 0;
- static char w[] = "\\/-";
-
- printf ("\010%c", w[p]);
- (++p == 3) ? (p = 0) : 0;
-}
diff --git a/board/ns9750dev/led.c b/board/ns9750dev/led.c
deleted file mode 100644
index b85c869..0000000
--- a/board/ns9750dev/led.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/***********************************************************************
- *
- * Copyright (C) 2004 by FS Forth-Systeme GmbH.
- * All rights reserved.
- *
- * $Id: led.c,v 1.1 2004/02/16 10:37:20 mpietrek Exp $
- * @Author: Markus Pietrek
- * @Descr: Defines helper functions for toggeling LEDs
- * @Usage:
- * @References: [1]
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- ***********************************************************************/
-
-#ifdef CONFIG_STATUS_LED
-
-#include <ns9750_bbus.h>
-
-static inline void __led_init( led_id_t mask, int state )
-{
- XXXX;
-}
-
-static inline void __led_toggle( led_id_t mask )
-{
-}
-
-static inline void __led_set( led_id_t mask, int state )
-{
-}
-
-#endif /* CONFIG_STATUS_LED */
diff --git a/board/ns9750dev/lowlevel_init.S b/board/ns9750dev/lowlevel_init.S
deleted file mode 100644
index ba5ff81..0000000
--- a/board/ns9750dev/lowlevel_init.S
+++ /dev/null
@@ -1,298 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * Modified for the NS9750 DevBoard by
- * (C) Copyright 2004 by FS Forth-Systeme GmbH.
- * Markus Pietrek <mpietrek@fsforth.de>
- * @References: [1] NS9750 Hardware Reference/December 2003
- * [2] ns9750_a.cmd from MAJIC configuration
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-#if defined(CONFIG_NS9750DEV)
-# ifndef CONFIG_SKIP_LOWLEVEL_INIT
-# include <./ns9750_sys.h>
-# include <./ns9750_mem.h>
-# endif
-#endif
-
-/***********************************************************************
- * @Function: write_register_block
- * @Return: nothing
- * @Descr: Copies the register block of register_offset:register value to
- * the registers at base r0. The block is assumed to start in RAM at r1
- * and end at r2. The linked RAM base address of U-Boot is assumed to be
- * in r5 while the ROM base address we are running from is r6
- * Uses r3 and r4 as tempory registers
- ***********************************************************************/
-
-.macro write_register_block
- @@ map the addresses to high memory
- sub r1, r1, r5
- add r1, r1, r6
- sub r2, r2, r5
- add r2, r2, r6
-
- @@ copy all
-1:
- @@ Write register/value pair starting at [r1] to register base r0
- ldr r3, [r1], #4
- ldr r4, [r1], #4
- str r4, [r0,r3]
- cmp r1, r2
- blt 1b
-.endm
-
-_TEXT_BASE:
- .word CONFIG_SYS_TEXT_BASE @ sdram load addr from config.mk
-_PHYS_FLASH:
- .word PHYS_FLASH_1 @ real flash address (without mirroring)
-_CAS_LATENCY:
- .word 0x00022000 @ for CAS2 latency
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-.globl lowlevel_init
-lowlevel_init:
-
- /* U-Boot may be linked to RAM at 0x780000. But this code will run in
- flash from 0x0. But in order to enable RAM we have to disable the
- mirror bit, therefore we have to jump to our real flash address
- beginning at PHYS_FLASH_1 (CS4 Base). Therefore,
- _run_at_real_flash_address may be 0x500003b0 while be linked to
- 0x7803b0. So we must modify our linked addresses */
-
- @@ branch to high memory address, away from 0x0
- ldr r5, _TEXT_BASE
- ldr r6, _PHYS_FLASH
- ldr r0, =_run_at_real_flash_address
- sub r0, r0, r5
- add r0, r0, r6
- mov pc, r0
- nop @ for pipelining
-
-_run_at_real_flash_address:
- @@ now we are running > PHYS_FLASH_1, safe to enable memory controller
-
- @@ Write Memory Configuration Registers
-
- ldr r0, _NS9750_MEM_MODULE_BASE
- ldr r1, =_MEM_CONFIG_START
- ldr r2, =_MEM_CONFIG_END
-
- write_register_block
-
- @@ Give SDRAM some time to settle
- @@ @TODO. According to [2] it should be 2 AHB cycles. Check
-
- ldr r1, =0x50
-_sdram_settle:
- subs r1, r1, #1
- bne _sdram_settle
-
-_enable_mappings:
- @@ Enable SDRAM Mode
-
- ldr r1, =_MEM_MODE_START
- ldr r2, =_MEM_MODE_END
-
- write_register_block
-
- ldr r3, _CAS_LATENCY @ perform one read from SDRAM
- ldr r3, [r3]
-
- @@ Enable SDRAM and memory mappings
-
- ldr r1, =_MEM_ENABLE_START
- ldr r2, =_MEM_ENABLE_END
-
- write_register_block
-
- @@ Activate AHB monitor
-
- ldr r0, =NS9750_SYS_MODULE_BASE
- ldr r1, =_AHB_MONITOR_START
- ldr r2, =_AHB_MONITOR_END
-
- write_register_block
-_relocate_lr:
- /* lr and ip (from cpu_init_crit) are still based on 0x0, relocate it to
- PHYS_FLASH. */
- mov r1, ip
- add r1, r1, r6
- mov ip, r1
-
- mov r1, lr
- add r1, r1, r6
- mov lr, r1
-
- @@ back to arch calling code
- mov pc, lr
-
- .ltorg
-
-_NS9750_MEM_MODULE_BASE:
- .word NS9750_MEM_MODULE_BASE
-
-_MEM_CONFIG_START:
- /* Table of 2 32bit entries. First word is register address offset
- relative to NS9750_MEM_MODULE_BASE, second one is value. They are
- written in order of appearance */
-
- @@ Register values taken from [2]
- .word NS9750_MEM_CTRL
- .word NS9750_MEM_CTRL_E
-
- .word NS9750_MEM_DYN_REFRESH
- .word (0x6 & NS9750_MEM_DYN_REFRESH_MA)
-
- .word NS9750_MEM_DYN_READ_CFG
- .word (0x1 & NS9750_MEM_DYN_READ_CFG_MA)
-
- .word NS9750_MEM_DYN_TRP
- .word (0x1 & NS9750_MEM_DYN_TRP_MA)
-
- .word NS9750_MEM_DYN_TRAS
- .word (0x4 & NS9750_MEM_DYN_TRAS_MA)
-
- .word NS9750_MEM_DYN_TAPR
- .word (0x1 & NS9750_MEM_DYN_TRAS_MA)
-
- .word NS9750_MEM_DYN_TDAL
- .word (0x5 & NS9750_MEM_DYN_TDAL_MA)
-
- .word NS9750_MEM_DYN_TWR
- .word (0x1 & NS9750_MEM_DYN_TWR_MA)
-
- .word NS9750_MEM_DYN_TRC
- .word (0x6 & NS9750_MEM_DYN_TRC_MA)
-
- .word NS9750_MEM_DYN_TRFC
- .word (0x6 & NS9750_MEM_DYN_TRFC_MA)
-
- .word NS9750_MEM_DYN_TRRD
- .word (0x1 & NS9750_MEM_DYN_TRRD_MA)
-
- .word NS9750_MEM_DYN_TMRD
- .word (0x1 & NS9750_MEM_DYN_TMRD_MA)
-
- @@ CS 4
- .word NS9750_MEM_DYN_CFG(0)
- .word (NS9750_MEM_DYN_CFG_AM | \
- (0x280 & NS9750_MEM_DYN_CFG_AM_MA))
-
- .word NS9750_MEM_DYN_RAS_CAS(0)
- .word ((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \
- (0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA))
-
- @@ CS 5
- .word NS9750_MEM_DYN_CFG(1)
- .word (NS9750_MEM_DYN_CFG_AM | \
- (0x280 & NS9750_MEM_DYN_CFG_AM_MA))
-
- .word NS9750_MEM_DYN_RAS_CAS(1)
- .word ((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \
- (0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA))
-
- @@ CS 6
- .word NS9750_MEM_DYN_CFG(2)
- .word (NS9750_MEM_DYN_CFG_AM | \
- (0x280 & NS9750_MEM_DYN_CFG_AM_MA))
-
- .word NS9750_MEM_DYN_RAS_CAS(2)
- .word ((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \
- (0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA))
-
- @@ CS 7
- .word NS9750_MEM_DYN_CFG(3)
- .word (NS9750_MEM_DYN_CFG_AM | \
- (0x280 & NS9750_MEM_DYN_CFG_AM_MA))
-
- .word NS9750_MEM_DYN_RAS_CAS(3)
- .word ((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \
- (0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA))
-
- .word NS9750_MEM_DYN_CTRL
- .word (NS9750_MEM_DYN_CTRL_I_PALL | \
- NS9750_MEM_DYN_CTRL_SR | \
- NS9750_MEM_DYN_CTRL_CE )
-
- .word NS9750_MEM_DYN_REFRESH
- .word (0x1 & NS9750_MEM_DYN_REFRESH_MA)
- @@ No further register settings after refresh
-_MEM_CONFIG_END:
-
-_MEM_MODE_START:
- .word NS9750_MEM_DYN_REFRESH
- .word (0x30 & NS9750_MEM_DYN_REFRESH_MA)
-
- .word NS9750_MEM_DYN_CTRL
- .word (NS9750_MEM_DYN_CTRL_I_MODE | \
- NS9750_MEM_DYN_CTRL_SR | \
- NS9750_MEM_DYN_CTRL_CE )
-_MEM_MODE_END:
-
-_MEM_ENABLE_START:
- .word NS9750_MEM_DYN_CTRL
- .word (NS9750_MEM_DYN_CTRL_I_NORMAL | \
- NS9750_MEM_DYN_CTRL_SR | \
- NS9750_MEM_DYN_CTRL_CE )
-
- @@ CS 4
- .word NS9750_MEM_DYN_CFG(0)
- .word (NS9750_MEM_DYN_CFG_BDMC | \
- NS9750_MEM_DYN_CFG_AM | \
- (0x280 & NS9750_MEM_DYN_CFG_AM_MA))
-
- @@ CS 5
- .word NS9750_MEM_DYN_CFG(1)
- .word (NS9750_MEM_DYN_CFG_BDMC | \
- NS9750_MEM_DYN_CFG_AM | \
- (0x280 & NS9750_MEM_DYN_CFG_AM_MA))
-
- @@ CS 6
- .word NS9750_MEM_DYN_CFG(2)
- .word (NS9750_MEM_DYN_CFG_BDMC | \
- NS9750_MEM_DYN_CFG_AM | \
- (0x280 & NS9750_MEM_DYN_CFG_AM_MA))
-
- @@ CS 7
- .word NS9750_MEM_DYN_CFG(3)
- .word (NS9750_MEM_DYN_CFG_BDMC | \
- NS9750_MEM_DYN_CFG_AM | \
- (0x280 & NS9750_MEM_DYN_CFG_AM_MA))
-_MEM_ENABLE_END:
-
-_AHB_MONITOR_START:
- .word NS9750_SYS_AHB_TIMEOUT
- .word 0x01000100 @ @TODO not calculated yet
-
- .word NS9750_SYS_AHB_MON
- .word (NS9750_SYS_AHB_MON_BMTC_GEN_IRQ | \
- NS9750_SYS_AHB_MON_BATC_GEN_IRQ)
-_AHB_MONITOR_END:
-
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
diff --git a/board/ns9750dev/ns9750dev.c b/board/ns9750dev/ns9750dev.c
deleted file mode 100644
index fc46244..0000000
--- a/board/ns9750dev/ns9750dev.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * Copyright (C) 2004 by FS Forth-Systeme GmbH.
- * All rights reserved.
- * Markus Pietrek <mpietrek@fsforth.de>
- * derived from omap1610innovator.c
- * @References: [1] NS9750 Hardware Reference/December 2003
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#if defined(CONFIG_NS9750DEV)
-# include <./configs/ns9750dev.h>
-# include <./ns9750_bbus.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void flash__init( void );
-void ether__init( void );
-
-static inline void delay( unsigned long loops )
-{
- __asm__ volatile ("1:\n"
- "subs %0, %1, #1\n"
- "bne 1b":"=r" (loops):"0" (loops));
-}
-
-
-/***********************************************************************
- * @Function: board_init
- * @Return: 0
- * @Descr: Enables BBUS modules and other devices
- ***********************************************************************/
-
-int board_init( void )
-{
- /* Active BBUS modules */
- *get_bbus_reg_addr( NS9750_BBUS_MASTER_RESET ) = 0;
-
-#warning Please register your machine at http://www.arm.linux.org.uk/developer/machines/?action=new
- /* arch number of OMAP 1510-Board */
- /* to be changed for OMAP 1610 Board */
- gd->bd->bi_arch_number = 234;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x10000100;
-
-
-/* this speeds up your boot a quite a bit. However to make it
- * work, you need make sure your kernel startup flush bug is fixed.
- * ... rkw ...
- */
- icache_enable();
-
- flash__init();
- ether__init();
- return 0;
-}
-
-
-int misc_init_r (void)
-{
- /* currently empty */
- return (0);
-}
-
-/******************************
- Routine:
- Description:
-******************************/
-void flash__init (void)
-{
-}
-/*************************************************************
- Routine:ether__init
- Description: take the Ethernet controller out of reset and wait
- for the EEPROM load to complete.
-*************************************************************/
-void ether__init (void)
-{
-}
-
-/******************************
- Routine:
- Description:
-******************************/
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-#if CONFIG_NR_DRAM_BANKS > 1
- gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
- gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
-#endif
- return 0;
-}
diff --git a/board/nvidia/cardhu/cardhu.c b/board/nvidia/cardhu/cardhu.c
index df4cb6b..3544b41 100644
--- a/board/nvidia/cardhu/cardhu.c
+++ b/board/nvidia/cardhu/cardhu.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2010-2012
+ * (C) Copyright 2010-2013
* NVIDIA Corporation <www.nvidia.com>
*
* See file CREDITS for list of people who contributed to this
@@ -23,7 +23,12 @@
#include <common.h>
#include <asm/arch/pinmux.h>
+#include <asm/arch/gp_padctrl.h>
#include "pinmux-config-cardhu.h"
+#include <i2c.h>
+
+#define PMU_I2C_ADDRESS 0x2D
+#define MAX_I2C_RETRY 3
/*
* Routine: pinmux_init
@@ -36,4 +41,54 @@ void pinmux_init(void)
pinmux_config_table(unused_pins_lowpower,
ARRAY_SIZE(unused_pins_lowpower));
+
+ /* Initialize any non-default pad configs (APB_MISC_GP regs) */
+ padgrp_config_table(cardhu_padctrl, ARRAY_SIZE(cardhu_padctrl));
+}
+
+#if defined(CONFIG_TEGRA_MMC)
+/*
+ * Do I2C/PMU writes to bring up SD card bus power
+ *
+ */
+void board_sdmmc_voltage_init(void)
+{
+ uchar reg, data_buffer[1];
+ int i;
+
+ i2c_set_bus_num(0); /* PMU is on bus 0 */
+
+ /* TPS659110: LDO5_REG = 3.3v, ACTIVE to SDMMC1 */
+ data_buffer[0] = 0x65;
+ reg = 0x32;
+
+ for (i = 0; i < MAX_I2C_RETRY; ++i) {
+ if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1))
+ udelay(100);
+ }
+
+ /* TPS659110: GPIO7_REG = PDEN, output a 1 to EN_3V3_SYS */
+ data_buffer[0] = 0x09;
+ reg = 0x67;
+
+ for (i = 0; i < MAX_I2C_RETRY; ++i) {
+ if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1))
+ udelay(100);
+ }
+}
+
+/*
+ * Routine: pin_mux_mmc
+ * Description: setup the MMC muxes, power rails, etc.
+ */
+void pin_mux_mmc(void)
+{
+ /*
+ * NOTE: We don't do mmc-specific pin muxes here.
+ * They were done globally in pinmux_init().
+ */
+
+ /* Bring up the SDIO1 power rail */
+ board_sdmmc_voltage_init();
}
+#endif /* MMC */
diff --git a/board/nvidia/cardhu/cardhu.c.mmc b/board/nvidia/cardhu/cardhu.c.mmc
deleted file mode 100644
index 9e83b6f..0000000
--- a/board/nvidia/cardhu/cardhu.c.mmc
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * (C) Copyright 2010-2012
- * NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/pinmux.h>
-#include "pinmux-config-cardhu.h"
-
-#include <asm/arch/clock.h>
-#include <asm/arch/gp_padctrl.h>
-#include <asm/arch/pmu.h>
-#include <asm/arch/sdmmc.h>
-#include <asm/arch-tegra/mmc.h>
-#include <asm/arch-tegra/tegra_mmc.h>
-#include <mmc.h>
-#include <i2c.h>
-
-/*
- * Routine: pinmux_init
- * Description: Do individual peripheral pinmux configs
- */
-void pinmux_init(void)
-{
- pinmux_config_table(tegra3_pinmux_common,
- ARRAY_SIZE(tegra3_pinmux_common));
-
- pinmux_config_table(unused_pins_lowpower,
- ARRAY_SIZE(unused_pins_lowpower));
-}
-
-#if defined(CONFIG_MMC)
-/*
- * Routine: pin_mux_mmc
- * Description: setup the pin muxes/tristate values for the SDMMC(s)
- */
-static void pin_mux_mmc(void)
-{
-}
-
-/* Do I2C/PMU writes to bring up SD card bus power */
-static void board_sdmmc_voltage_init(void)
-{
- uchar reg, data_buffer[1];
- int i;
-
- i2c_set_bus_num(0); /* PMU is on bus 0 */
-
- data_buffer[0] = 0x65;
- reg = 0x32;
-
- for (i = 0; i < MAX_I2C_RETRY; ++i) {
- if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1))
- udelay(100);
- }
-
- data_buffer[0] = 0x09;
- reg = 0x67;
-
- for (i = 0; i < MAX_I2C_RETRY; ++i) {
- if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1))
- udelay(100);
- }
-}
-
-static void pad_init_mmc(struct tegra_mmc *reg)
-{
- struct apb_misc_gp_ctlr *const gpc =
- (struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE;
- struct sdmmc_ctlr *const sdmmc = (struct sdmmc_ctlr *)reg;
- u32 val, offset = (unsigned int)reg;
- u32 padcfg, padmask;
-
- debug("%s: sdmmc address = %08x\n", __func__, (unsigned int)sdmmc);
-
- /* Set the pad drive strength for SDMMC1 or 3 only */
- if (offset != TEGRA_SDMMC1_BASE && offset != TEGRA_SDMMC3_BASE) {
- debug("%s: settings are only valid for SDMMC1/SDMMC3!\n",
- __func__);
- return;
- }
-
- /* Set pads as per T30 TRM, section 24.6.1.2 */
- padcfg = (GP_SDIOCFG_DRVUP_SLWF | GP_SDIOCFG_DRVDN_SLWR | \
- GP_SDIOCFG_DRVUP | GP_SDIOCFG_DRVDN);
- padmask = 0x00000FFF;
- if (offset == TEGRA_SDMMC1_BASE) {
- val = readl(&gpc->sdio1cfg);
- val &= padmask;
- val |= padcfg;
- writel(val, &gpc->sdio1cfg);
- } else { /* SDMMC3 */
- val = readl(&gpc->sdio3cfg);
- val &= padmask;
- val |= padcfg;
- writel(val, &gpc->sdio3cfg);
- }
-
- val = readl(&sdmmc->sdmmc_sdmemcomp_pad_ctrl);
- val &= 0xFFFFFFF0;
- val |= MEMCOMP_PADCTRL_VREF;
- writel(val, &sdmmc->sdmmc_sdmemcomp_pad_ctrl);
-
- val = readl(&sdmmc->sdmmc_auto_cal_config);
- val &= 0xFFFF0000;
- val |= AUTO_CAL_PU_OFFSET | AUTO_CAL_PD_OFFSET | AUTO_CAL_ENABLED;
- writel(val, &sdmmc->sdmmc_auto_cal_config);
-}
-
-/* this is a weak define that we are overriding */
-int board_mmc_init(bd_t *bd)
-{
- debug("board_mmc_init called\n");
-
- /* Turn on SD-card bus power */
- board_sdmmc_voltage_init();
-
- /* Set up the SDMMC pads as per the TRM */
- pad_init_mmc((struct tegra_mmc *)TEGRA_SDMMC1_BASE);
-
- /* Enable muxes, etc. for SDMMC controllers */
- pin_mux_mmc();
-
- /* init dev 0 (SDMMC4), ("HSMMC") with 8-bit bus */
- tegra_mmc_init(0, 8, -1, -1);
-
- /* init dev 1 (SDMMC0), ("SDIO") with 8-bit bus */
- tegra_mmc_init(1, 8, -1, -1);
-
- return 0;
-}
-#endif /* MMC */
diff --git a/board/nvidia/cardhu/pinmux-config-cardhu.h b/board/nvidia/cardhu/pinmux-config-cardhu.h
index 8428bba..51d2b94 100644
--- a/board/nvidia/cardhu/pinmux-config-cardhu.h
+++ b/board/nvidia/cardhu/pinmux-config-cardhu.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@@ -53,6 +53,18 @@
.ioreset = PMUX_PIN_IO_RESET_##_ioreset \
}
+#define DEFAULT_PADCFG(_padgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \
+ { \
+ .padgrp = PDRIVE_PINGROUP_##_padgrp, \
+ .slwf = _slwf, \
+ .slwr = _slwr, \
+ .drvup = _drvup, \
+ .drvdn = _drvdn, \
+ .lpmd = PGRP_LPMD_##_lpmd, \
+ .schmt = PGRP_SCHMT_##_schmt, \
+ .hsm = PGRP_HSM_##_hsm, \
+ }
+
static struct pingroup_config tegra3_pinmux_common[] = {
/* SDMMC1 pinmux */
DEFAULT_PINMUX(SDMMC1_CLK, SDMMC1, NORMAL, NORMAL, INPUT),
@@ -326,4 +338,9 @@ static struct pingroup_config unused_pins_lowpower[] = {
DEFAULT_PINMUX(GMI_DQS, NAND, NORMAL, TRISTATE, OUTPUT),
};
-#endif /* _PINMUX_CONFIG_CARDHU_H_ */
+static struct padctrl_config cardhu_padctrl[] = {
+ /* (_padgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) */
+ DEFAULT_PADCFG(SDIO1, SDIOCFG_DRVUP_SLWF, SDIOCFG_DRVDN_SLWR, \
+ SDIOCFG_DRVUP, SDIOCFG_DRVDN, NONE, DISABLE, DISABLE),
+};
+#endif /* _PINMUX_CONFIG_CARDHU_H_ */
diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c
index d1d8a29..7d9f361 100644
--- a/board/nvidia/common/board.c
+++ b/board/nvidia/common/board.c
@@ -46,7 +46,11 @@
#include <asm/arch/emc.h>
#endif
#ifdef CONFIG_USB_EHCI_TEGRA
-#include <asm/arch/usb.h>
+#include <asm/arch-tegra/usb.h>
+#endif
+#ifdef CONFIG_TEGRA_MMC
+#include <asm/arch-tegra/tegra_mmc.h>
+#include <asm/arch-tegra/mmc.h>
#endif
#include <i2c.h>
#include <spi.h>
@@ -221,3 +225,53 @@ int board_late_init(void)
#endif
return 0;
}
+
+#if defined(CONFIG_TEGRA_MMC)
+void __pin_mux_mmc(void)
+{
+}
+
+void pin_mux_mmc(void) __attribute__((weak, alias("__pin_mux_mmc")));
+
+/* this is a weak define that we are overriding */
+int board_mmc_init(bd_t *bd)
+{
+ debug("%s called\n", __func__);
+
+ /* Enable muxes, etc. for SDMMC controllers */
+ pin_mux_mmc();
+
+ debug("%s: init MMC\n", __func__);
+ tegra_mmc_init();
+
+ return 0;
+}
+
+void pad_init_mmc(struct mmc_host *host)
+{
+#if defined(CONFIG_TEGRA30)
+ enum periph_id id = host->mmc_id;
+ u32 val;
+
+ debug("%s: sdmmc address = %08x, id = %d\n", __func__,
+ (unsigned int)host->reg, id);
+
+ /* Set the pad drive strength for SDMMC1 or 3 only */
+ if (id != PERIPH_ID_SDMMC1 && id != PERIPH_ID_SDMMC3) {
+ debug("%s: settings are only valid for SDMMC1/SDMMC3!\n",
+ __func__);
+ return;
+ }
+
+ val = readl(&host->reg->sdmemcmppadctl);
+ val &= 0xFFFFFFF0;
+ val |= MEMCOMP_PADCTRL_VREF;
+ writel(val, &host->reg->sdmemcmppadctl);
+
+ val = readl(&host->reg->autocalcfg);
+ val &= 0xFFFF0000;
+ val |= AUTO_CAL_PU_OFFSET | AUTO_CAL_PD_OFFSET | AUTO_CAL_ENABLED;
+ writel(val, &host->reg->autocalcfg);
+#endif /* T30 */
+}
+#endif /* MMC */
diff --git a/board/nvidia/dalmore/dalmore.c b/board/nvidia/dalmore/dalmore.c
index aca3c7d..2020a5f 100644
--- a/board/nvidia/dalmore/dalmore.c
+++ b/board/nvidia/dalmore/dalmore.c
@@ -24,6 +24,9 @@
*/
void pinmux_init(void)
{
+ pinmux_config_table(tegra114_pinmux_set_nontristate,
+ ARRAY_SIZE(tegra114_pinmux_set_nontristate));
+
pinmux_config_table(tegra114_pinmux_common,
ARRAY_SIZE(tegra114_pinmux_common));
diff --git a/board/nvidia/dalmore/pinmux-config-dalmore.h b/board/nvidia/dalmore/pinmux-config-dalmore.h
index 3dd47da..3ef6f4e 100644
--- a/board/nvidia/dalmore/pinmux-config-dalmore.h
+++ b/board/nvidia/dalmore/pinmux-config-dalmore.h
@@ -17,7 +17,7 @@
#ifndef _PINMUX_CONFIG_DALMORE_H_
#define _PINMUX_CONFIG_DALMORE_H_
-#define DEFAULT_PINMUX(_pingroup, _mux, _pull, _tri, _io) \
+#define DEFAULT_PINMUX(_pingroup, _mux, _pull, _tri, _io) \
{ \
.pingroup = PINGRP_##_pingroup, \
.func = PMUX_FUNC_##_mux, \
@@ -41,7 +41,19 @@
.ioreset = PMUX_PIN_IO_RESET_DEFAULT, \
}
-#define LV_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _ioreset) \
+#define DDC_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _rcv_sel) \
+ { \
+ .pingroup = PINGRP_##_pingroup, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_##_lock, \
+ .rcv_sel = PMUX_PIN_RCV_SEL_##_rcv_sel, \
+ .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \
+ }
+
+#define VI_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _ioreset) \
{ \
.pingroup = PINGRP_##_pingroup, \
.func = PMUX_FUNC_##_mux, \
@@ -50,200 +62,303 @@
.io = PMUX_PIN_##_io, \
.lock = PMUX_PIN_LOCK_##_lock, \
.od = PMUX_PIN_OD_DEFAULT, \
- .ioreset = PMUX_PIN_IO_RESET_##_ioreset \
+ .ioreset = PMUX_PIN_IO_RESET_##_ioreset \
+ }
+
+#define CEC_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _od) \
+ { \
+ .pingroup = PINGRP_##_pingroup, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_##_lock, \
+ .od = PMUX_PIN_OD_##_od, \
+ .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \
+ }
+
+#define USB_PINMUX CEC_PINMUX
+
+#define DEFAULT_PADCFG(_padgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \
+ { \
+ .padgrp = PDRIVE_PINGROUP_##_padgrp, \
+ .slwf = _slwf, \
+ .slwr = _slwr, \
+ .drvup = _drvup, \
+ .drvdn = _drvdn, \
+ .lpmd = PGRP_LPMD_##_lpmd, \
+ .schmt = PGRP_SCHMT_##_schmt, \
+ .hsm = PGRP_HSM_##_hsm, \
}
static struct pingroup_config tegra114_pinmux_common[] = {
+ /* EXTPERIPH1 pinmux */
+ DEFAULT_PINMUX(CLK1_OUT, EXTPERIPH1, NORMAL, NORMAL, OUTPUT),
+
+ /* I2S0 pinmux */
+ DEFAULT_PINMUX(DAP1_DIN, I2S0, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(DAP1_DOUT, I2S0, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP1_FS, I2S0, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP1_SCLK, I2S0, NORMAL, NORMAL, INPUT),
+
+ /* I2S1 pinmux */
+ DEFAULT_PINMUX(DAP2_DIN, I2S1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(DAP2_DOUT, I2S1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP2_FS, I2S1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP2_SCLK, I2S1, NORMAL, NORMAL, INPUT),
+
+ /* I2S3 pinmux */
+ DEFAULT_PINMUX(DAP4_DIN, I2S3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_DOUT, I2S3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_FS, I2S3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_SCLK, I2S3, NORMAL, NORMAL, INPUT),
+
+ /* CLDVFS pinmux */
+ DEFAULT_PINMUX(DVFS_PWM, CLDVFS, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(DVFS_CLK, CLDVFS, NORMAL, NORMAL, OUTPUT),
+
+ /* ULPI pinmux */
+ DEFAULT_PINMUX(ULPI_CLK, ULPI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA0, ULPI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA1, ULPI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA2, ULPI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA3, ULPI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA4, ULPI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA5, ULPI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA6, ULPI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA7, ULPI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DIR, ULPI, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(ULPI_NXT, ULPI, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(ULPI_STP, ULPI, NORMAL, NORMAL, OUTPUT),
+
+ /* I2C3 pinmux */
+ I2C_PINMUX(CAM_I2C_SCL, I2C3, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
+ I2C_PINMUX(CAM_I2C_SDA, I2C3, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
+
+ /* VI pinmux */
+ VI_PINMUX(CAM_MCLK, VI_ALT3, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+
+ /* VI_ALT1 pinmux */
+ VI_PINMUX(GPIO_PBB0, VI_ALT3, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+
+ /* VGP4 pinmux */
+ VI_PINMUX(GPIO_PBB4, VGP4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+
+ /* I2C2 pinmux */
+ I2C_PINMUX(GEN2_I2C_SCL, I2C2, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
+ I2C_PINMUX(GEN2_I2C_SDA, I2C2, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
+
+ /* UARTD pinmux */
+ DEFAULT_PINMUX(GMI_A16, UARTD, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_A17, UARTD, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_A18, UARTD, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_A19, UARTD, NORMAL, NORMAL, OUTPUT),
+
+ /* SPI4 pinmux */
+ DEFAULT_PINMUX(GMI_AD5, SPI4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD6, SPI4, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD7, SPI4, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD12, RSVD1, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_CS6_N, SPI4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_WR_N, SPI4, NORMAL, NORMAL, INPUT),
+
+ /* PWM1 pinmux */
+ DEFAULT_PINMUX(GMI_AD9, PWM1, NORMAL, NORMAL, OUTPUT),
+
+ /* SOC pinmux */
+ DEFAULT_PINMUX(GMI_CS1_N, SOC, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_OE_N, SOC, NORMAL, TRISTATE, INPUT),
+
+ /* EXTPERIPH2 pinmux */
+ DEFAULT_PINMUX(CLK2_OUT, EXTPERIPH2, NORMAL, NORMAL, OUTPUT),
+
/* SDMMC1 pinmux */
- DEFAULT_PINMUX(SDMMC1_CLK, SDMMC1, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC1_CMD, SDMMC1, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC1_DAT3, SDMMC1, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC1_DAT2, SDMMC1, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC1_DAT1, SDMMC1, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC1_DAT0, SDMMC1, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC1_WP_N, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_CLK, SDMMC1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_CMD, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT0, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT1, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT2, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT3, SDMMC1, UP, NORMAL, INPUT),
/* SDMMC3 pinmux */
- DEFAULT_PINMUX(SDMMC3_CLK, SDMMC3, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC3_CLK_LB_IN, SDMMC3, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC3_CLK_LB_OUT, SDMMC3, NORMAL, NORMAL, OUTPUT),
-
- DEFAULT_PINMUX(SDMMC3_CMD, SDMMC3, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC3_DAT0, SDMMC3, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC3_DAT1, SDMMC3, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC3_DAT2, SDMMC3, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC3_DAT3, SDMMC3, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC3_CD_N, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_CLK, SDMMC3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_CMD, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT0, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT1, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT2, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT3, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_CLK_LB_IN, SDMMC3, UP, TRISTATE, INPUT),
+ DEFAULT_PINMUX(SDMMC3_CLK_LB_OUT, SDMMC3, DOWN, NORMAL, INPUT),
/* SDMMC4 pinmux */
- LV_PINMUX(SDMMC4_CLK, SDMMC4, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
- LV_PINMUX(SDMMC4_CMD, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
- LV_PINMUX(SDMMC4_DAT0, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
- LV_PINMUX(SDMMC4_DAT1, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
- LV_PINMUX(SDMMC4_DAT2, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
- LV_PINMUX(SDMMC4_DAT3, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
- LV_PINMUX(SDMMC4_DAT4, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
- LV_PINMUX(SDMMC4_DAT5, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
- LV_PINMUX(SDMMC4_DAT6, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
- LV_PINMUX(SDMMC4_DAT7, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
- LV_PINMUX(SDMMC4_RST_N, RSVD1, DOWN, NORMAL, INPUT, DISABLE, DISABLE),
+ DEFAULT_PINMUX(SDMMC4_CLK, SDMMC4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC4_CMD, SDMMC4, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC4_DAT0, SDMMC4, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC4_DAT1, SDMMC4, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC4_DAT2, SDMMC4, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC4_DAT3, SDMMC4, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC4_DAT4, SDMMC4, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC4_DAT5, SDMMC4, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC4_DAT6, SDMMC4, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC4_DAT7, SDMMC4, UP, NORMAL, INPUT),
+
+ /* BLINK pinmux */
+ DEFAULT_PINMUX(CLK_32K_OUT, BLINK, NORMAL, NORMAL, OUTPUT),
+
+ /* KBC pinmux */
+ DEFAULT_PINMUX(KB_COL0, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL1, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL2, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW0, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW1, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW2, KBC, UP, NORMAL, INPUT),
+
+ /*Audio Codec*/
+ DEFAULT_PINMUX(DAP3_DIN, RSVD1, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(DAP3_SCLK, RSVD1, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GPIO_PV0, RSVD1, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(KB_ROW7, RSVD1, UP, NORMAL, INPUT),
+
+ /* UARTA pinmux */
+ DEFAULT_PINMUX(KB_ROW10, UARTA, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_ROW9, UARTA, NORMAL, NORMAL, OUTPUT),
+
+ /* I2CPWR pinmux (I2C5) */
+ I2C_PINMUX(PWR_I2C_SCL, I2CPWR, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
+ I2C_PINMUX(PWR_I2C_SDA, I2CPWR, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
+
+ /* SYSCLK pinmux */
+ DEFAULT_PINMUX(SYS_CLK_REQ, SYSCLK, NORMAL, NORMAL, OUTPUT),
+
+ /* RTCK pinmux */
+ DEFAULT_PINMUX(JTAG_RTCK, RTCK, NORMAL, NORMAL, INPUT),
+
+ /* CLK pinmux */
+ DEFAULT_PINMUX(CLK_32K_IN, CLK, NORMAL, TRISTATE, INPUT),
+
+ /* PWRON pinmux */
+ DEFAULT_PINMUX(CORE_PWR_REQ, PWRON, NORMAL, NORMAL, OUTPUT),
+
+ /* CPU pinmux */
+ DEFAULT_PINMUX(CPU_PWR_REQ, CPU, NORMAL, NORMAL, OUTPUT),
+
+ /* PMI pinmux */
+ DEFAULT_PINMUX(PWR_INT_N, PMI, NORMAL, TRISTATE, INPUT),
+
+ /* RESET_OUT_N pinmux */
+ DEFAULT_PINMUX(RESET_OUT_N, RESET_OUT_N, NORMAL, NORMAL, OUTPUT),
+
+ /* EXTPERIPH3 pinmux */
+ DEFAULT_PINMUX(CLK3_OUT, EXTPERIPH3, NORMAL, NORMAL, OUTPUT),
/* I2C1 pinmux */
- I2C_PINMUX(GEN1_I2C_SCL, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
- I2C_PINMUX(GEN1_I2C_SDA, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(GEN1_I2C_SCL, I2C1, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
+ I2C_PINMUX(GEN1_I2C_SDA, I2C1, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
- /* I2C2 pinmux */
- I2C_PINMUX(GEN2_I2C_SCL, I2C2, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
- I2C_PINMUX(GEN2_I2C_SDA, I2C2, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ /* UARTB pinmux */
+ DEFAULT_PINMUX(UART2_CTS_N, UARTB, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(UART2_RTS_N, UARTB, NORMAL, NORMAL, OUTPUT),
- /* I2C3 pinmux */
- I2C_PINMUX(CAM_I2C_SCL, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
- I2C_PINMUX(CAM_I2C_SDA, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ /* IRDA pinmux */
+ DEFAULT_PINMUX(UART2_RXD, UARTB, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(UART2_TXD, UARTB, NORMAL, NORMAL, OUTPUT),
+
+ /* UARTC pinmux */
+ DEFAULT_PINMUX(UART3_CTS_N, UARTC, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(UART3_RTS_N, UARTC, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(UART3_RXD, UARTC, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(UART3_TXD, UARTC, NORMAL, NORMAL, OUTPUT),
+
+ /* OWR pinmux */
+ DEFAULT_PINMUX(OWR, OWR, NORMAL, NORMAL, INPUT),
+
+ /* CEC pinmux */
+ CEC_PINMUX(HDMI_CEC, CEC, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
/* I2C4 pinmux */
- I2C_PINMUX(DDC_SCL, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
- I2C_PINMUX(DDC_SDA, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
-
- /* Power I2C pinmux */
- I2C_PINMUX(PWR_I2C_SCL, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
- I2C_PINMUX(PWR_I2C_SDA, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
-
- DEFAULT_PINMUX(ULPI_DATA0, UARTA, NORMAL, NORMAL, OUTPUT),
- DEFAULT_PINMUX(ULPI_DATA1, UARTA, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(ULPI_DATA2, UARTA, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(ULPI_DATA3, UARTA, NORMAL, NORMAL, INPUT),
-
- DEFAULT_PINMUX(ULPI_DATA4, UARTA, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(ULPI_DATA5, UARTA, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(ULPI_DATA6, UARTA, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(ULPI_DATA7, UARTA, NORMAL, NORMAL, OUTPUT),
- DEFAULT_PINMUX(ULPI_CLK, UARTD, NORMAL, NORMAL, OUTPUT),
- DEFAULT_PINMUX(ULPI_DIR, UARTD, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(ULPI_NXT, UARTD, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(ULPI_STP, UARTD, NORMAL, NORMAL, OUTPUT),
- DEFAULT_PINMUX(DAP3_FS, I2S2, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(DAP3_DIN, I2S2, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(DAP3_DOUT, I2S2, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(DAP3_SCLK, I2S2, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(CLK2_OUT, EXTPERIPH2, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(CLK2_REQ, DAP, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(UART2_RXD, UARTB, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(UART2_TXD, UARTB, NORMAL, NORMAL, OUTPUT),
- DEFAULT_PINMUX(UART2_RTS_N, UARTB, NORMAL, NORMAL, OUTPUT),
- DEFAULT_PINMUX(UART2_CTS_N, UARTB, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(UART3_TXD, UARTC, NORMAL, NORMAL, OUTPUT),
- DEFAULT_PINMUX(UART3_RXD, UARTC, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(UART3_CTS_N, UARTC, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(UART3_RTS_N, UARTC, NORMAL, NORMAL, OUTPUT),
- DEFAULT_PINMUX(GPIO_PU0, RSVD1, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(GPIO_PU1, RSVD1, NORMAL, NORMAL, OUTPUT),
- DEFAULT_PINMUX(GPIO_PU2, RSVD1, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(GPIO_PU3, RSVD1, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(GPIO_PU4, PWM1, NORMAL, NORMAL, OUTPUT),
- DEFAULT_PINMUX(GPIO_PU5, PWM2, NORMAL, NORMAL, OUTPUT),
- DEFAULT_PINMUX(GPIO_PU6, RSVD1, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(DAP4_FS, I2S3, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(DAP4_DIN, I2S3, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(DAP4_DOUT, I2S3, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(DAP4_SCLK, I2S3, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(CLK3_OUT, EXTPERIPH3, NORMAL, NORMAL, OUTPUT),
- DEFAULT_PINMUX(CLK3_REQ, DEV3, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(GMI_WP_N, GMI, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(GMI_CS2_N, RSVD1, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(GMI_AD8, PWM0, NORMAL, NORMAL, OUTPUT),
- DEFAULT_PINMUX(GMI_AD10, NAND, NORMAL, NORMAL, OUTPUT),
- DEFAULT_PINMUX(GMI_A16, UARTD, NORMAL, NORMAL, OUTPUT),
- DEFAULT_PINMUX(GMI_A17, UARTD, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(GMI_A18, UARTD, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(GMI_A19, UARTD, NORMAL, NORMAL, OUTPUT),
- DEFAULT_PINMUX(CAM_MCLK, VI_ALT2, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(GPIO_PCC1, RSVD1, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(GPIO_PBB0, RSVD1, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(GPIO_PBB3, VGP3, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(GPIO_PBB5, VGP5, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(GPIO_PBB6, VGP6, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(GPIO_PBB7, I2S4, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(GPIO_PCC2, I2S4, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(JTAG_RTCK, RTCK, NORMAL, NORMAL, OUTPUT),
-
- /* KBC keys */
- DEFAULT_PINMUX(KB_ROW0, KBC, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(KB_ROW1, KBC, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(KB_ROW2, KBC, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(KB_ROW3, KBC, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(KB_ROW4, KBC, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(KB_ROW5, KBC, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(KB_ROW6, KBC, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(KB_ROW7, KBC, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(KB_ROW8, KBC, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(KB_ROW9, KBC, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(KB_ROW10, KBC, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(KB_COL0, KBC, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(KB_COL1, KBC, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(KB_COL2, KBC, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(KB_COL3, KBC, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(KB_COL4, KBC, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(KB_COL5, KBC, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(KB_COL6, KBC, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(KB_COL7, KBC, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(GPIO_PV0, RSVD1, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(GPIO_PV1, RSVD1, UP, NORMAL, INPUT),
-
- DEFAULT_PINMUX(CLK_32K_OUT, BLINK, NORMAL, NORMAL, OUTPUT),
- DEFAULT_PINMUX(SYS_CLK_REQ, SYSCLK, NORMAL, NORMAL, OUTPUT),
- DEFAULT_PINMUX(OWR, OWR, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(DAP1_FS, I2S0, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(DAP1_DIN, I2S0, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(DAP1_DOUT, I2S0, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(DAP1_SCLK, I2S0, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(CLK1_REQ, DAP, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(CLK1_OUT, EXTPERIPH1, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(SPDIF_IN, SPDIF, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(SPDIF_OUT, SPDIF, NORMAL, NORMAL, OUTPUT),
- DEFAULT_PINMUX(DAP2_FS, I2S1, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(DAP2_DIN, I2S1, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(DAP2_DOUT, I2S1, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(DAP2_SCLK, I2S1, NORMAL, NORMAL, INPUT),
-
- DEFAULT_PINMUX(SPI1_MOSI, SPI1, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(SPI1_SCK, SPI1, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(SPI1_CS0_N, SPI1, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(SPI1_CS1_N, SPI1, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(SPI1_CS2_N, SPI1, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(SPI1_MISO, SPI1, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(HDMI_CEC, CEC, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(HDMI_INT, RSVD1, NORMAL, TRISTATE, INPUT),
-
- /* GPIOs */
- /* SDMMC1 CD gpio */
- DEFAULT_PINMUX(GMI_IORDY, RSVD1, UP, NORMAL, INPUT),
-
- /* Touch RESET */
- DEFAULT_PINMUX(GMI_AD14, NAND, NORMAL, NORMAL, OUTPUT),
-
- /* Power rails GPIO */
- DEFAULT_PINMUX(SPI2_SCK, GMI, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(GPIO_PBB4, VGP4, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(KB_ROW8, KBC, UP, NORMAL, INPUT),
+ DDC_PINMUX(DDC_SCL, I2C4, NORMAL, NORMAL, INPUT, DEFAULT, HIGH),
+ DDC_PINMUX(DDC_SDA, I2C4, NORMAL, NORMAL, INPUT, DEFAULT, HIGH),
+
+ /* USB pinmux */
+ USB_PINMUX(USB_VBUS_EN0, USB, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE),
+
+ /* nct */
+ DEFAULT_PINMUX(GPIO_X6_AUD, SPI6, UP, TRISTATE, INPUT),
};
static struct pingroup_config unused_pins_lowpower[] = {
- DEFAULT_PINMUX(GMI_CS0_N, NAND, UP, TRISTATE, OUTPUT),
- DEFAULT_PINMUX(GMI_CS3_N, NAND, UP, TRISTATE, OUTPUT),
- DEFAULT_PINMUX(GMI_CS4_N, NAND, UP, TRISTATE, OUTPUT),
- DEFAULT_PINMUX(GMI_CS7_N, NAND, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(GMI_AD0, NAND, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(GMI_AD1, NAND, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(GMI_AD2, NAND, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(GMI_AD3, NAND, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(GMI_AD4, NAND, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(GMI_AD5, NAND, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(GMI_AD6, NAND, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(GMI_AD7, NAND, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(GMI_AD9, PWM1, NORMAL, TRISTATE, OUTPUT),
- DEFAULT_PINMUX(GMI_AD11, NAND, NORMAL, TRISTATE, OUTPUT),
- DEFAULT_PINMUX(GMI_AD13, NAND, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(GMI_WR_N, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(CLK1_REQ, RSVD3, DOWN, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(USB_VBUS_EN1, RSVD3, DOWN, TRISTATE, OUTPUT),
};
-#endif /* _PINMUX_CONFIG_DALMORE_H_ */
+/* Initially setting all used GPIO's to non-TRISTATE */
+static struct pingroup_config tegra114_pinmux_set_nontristate[] = {
+ DEFAULT_PINMUX(GPIO_X4_AUD, RSVD1, DOWN, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GPIO_X5_AUD, RSVD1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_X6_AUD, RSVD3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_X7_AUD, RSVD1, DOWN, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GPIO_W2_AUD, RSVD1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_W3_AUD, SPI6, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_X1_AUD, RSVD3, DOWN, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_X3_AUD, RSVD3, UP, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(DAP3_FS, I2S2, DOWN, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(DAP3_DIN, I2S2, DOWN, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(DAP3_DOUT, I2S2, DOWN, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(DAP3_SCLK, I2S2, DOWN, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GPIO_PV0, RSVD3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PV1, RSVD1, NORMAL, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(GPIO_PBB3, RSVD3, DOWN, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GPIO_PBB5, RSVD3, DOWN, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GPIO_PBB6, RSVD3, DOWN, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GPIO_PBB7, RSVD3, DOWN, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GPIO_PCC1, RSVD3, DOWN, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PCC2, RSVD3, DOWN, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(GMI_AD0, GMI, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD1, GMI, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD10, GMI, DOWN, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD11, GMI, DOWN, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD12, GMI, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD13, GMI, DOWN, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD2, GMI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD3, GMI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD8, GMI, DOWN, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_ADV_N, GMI, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_CLK, GMI, DOWN, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_CS0_N, GMI, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_CS2_N, GMI, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_CS3_N, GMI, UP, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_CS4_N, GMI, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_CS7_N, GMI, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_DQS, GMI, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_IORDY, GMI, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_WP_N, GMI, UP, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(SDMMC1_WP_N, SPI4, UP, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(CLK2_REQ, RSVD3, NORMAL, NORMAL, OUTPUT),
+
+ DEFAULT_PINMUX(KB_COL3, KBC, UP, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(KB_COL4, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL5, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL6, KBC, UP, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(KB_COL7, KBC, UP, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(KB_ROW3, KBC, DOWN, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW4, KBC, DOWN, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW6, KBC, DOWN, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW8, KBC, UP, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(CLK3_REQ, RSVD3, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GPIO_PU4, RSVD3, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GPIO_PU5, RSVD3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GPIO_PU6, RSVD3, NORMAL, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(HDMI_INT, RSVD1, DOWN, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(GMI_AD9, PWM1, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(SPDIF_IN, USB, NORMAL, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(SDMMC3_CD_N, SDMMC3, UP, NORMAL, INPUT),
+};
+#endif /* PINMUX_CONFIG_COMMON_H */
diff --git a/board/nvidia/dts/tegra114-dalmore.dts b/board/nvidia/dts/tegra114-dalmore.dts
index 7315577..30cf1fb 100644
--- a/board/nvidia/dts/tegra114-dalmore.dts
+++ b/board/nvidia/dts/tegra114-dalmore.dts
@@ -1,13 +1,46 @@
/dts-v1/;
-/include/ ARCH_CPU_DTS
+#include "tegra114.dtsi"
/ {
model = "NVIDIA Dalmore";
compatible = "nvidia,dalmore", "nvidia,tegra114";
+ aliases {
+ i2c0 = "/i2c@7000d000";
+ i2c1 = "/i2c@7000c000";
+ i2c2 = "/i2c@7000c400";
+ i2c3 = "/i2c@7000c500";
+ i2c4 = "/i2c@7000c700";
+ };
+
memory {
device_type = "memory";
reg = <0x80000000 0x80000000>;
};
+
+ i2c@7000c000 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ i2c@7000c400 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ i2c@7000c500 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ i2c@7000c700 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ i2c@7000d000 {
+ status = "okay";
+ clock-frequency = <400000>;
+ };
};
diff --git a/board/nvidia/dts/tegra20-harmony.dts b/board/nvidia/dts/tegra20-harmony.dts
index aeda3a1..7934e4a 100644
--- a/board/nvidia/dts/tegra20-harmony.dts
+++ b/board/nvidia/dts/tegra20-harmony.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ ARCH_CPU_DTS
+#include "tegra20.dtsi"
/ {
model = "NVIDIA Tegra20 Harmony evaluation board";
@@ -9,6 +9,8 @@
aliases {
usb0 = "/usb@c5008000";
usb1 = "/usb@c5004000";
+ sdhci0 = "/sdhci@c8000600";
+ sdhci1 = "/sdhci@c8000200";
};
memory {
@@ -52,4 +54,20 @@
usb@c5004000 {
nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
};
+
+ sdhci@c8000200 {
+ status = "okay";
+ cd-gpios = <&gpio 69 1>; /* gpio PI5 */
+ wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+ power-gpios = <&gpio 155 0>; /* gpio PT3 */
+ bus-width = <4>;
+ };
+
+ sdhci@c8000600 {
+ status = "okay";
+ cd-gpios = <&gpio 58 1>; /* gpio PH2 */
+ wp-gpios = <&gpio 59 0>; /* gpio PH3 */
+ power-gpios = <&gpio 70 0>; /* gpio PI6 */
+ bus-width = <8>;
+ };
};
diff --git a/board/nvidia/dts/tegra20-seaboard.dts b/board/nvidia/dts/tegra20-seaboard.dts
index 527a296..c0e2e1e 100644
--- a/board/nvidia/dts/tegra20-seaboard.dts
+++ b/board/nvidia/dts/tegra20-seaboard.dts
@@ -1,7 +1,6 @@
/dts-v1/;
-/memreserve/ 0x1c000000 0x04000000;
-/include/ ARCH_CPU_DTS
+#include "tegra20.dtsi"
/ {
model = "NVIDIA Seaboard";
@@ -12,14 +11,15 @@
};
aliases {
- /* This defines the order of our USB ports */
+ /* This defines the order of our ports */
usb0 = "/usb@c5008000";
usb1 = "/usb@c5000000";
-
i2c0 = "/i2c@7000d000";
i2c1 = "/i2c@7000c000";
i2c2 = "/i2c@7000c400";
i2c3 = "/i2c@7000c500";
+ sdhci0 = "/sdhci@c8000600";
+ sdhci1 = "/sdhci@c8000400";
};
memory {
@@ -156,13 +156,16 @@
};
sdhci@c8000400 {
- cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ status = "okay";
+ cd-gpios = <&gpio 69 1>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
+ bus-width = <4>;
};
sdhci@c8000600 {
- support-8bit;
+ status = "okay";
+ bus-width = <8>;
};
lcd_panel: panel {
diff --git a/board/nvidia/dts/tegra20-ventana.dts b/board/nvidia/dts/tegra20-ventana.dts
index 3e5e39d..e1a3d1e 100644
--- a/board/nvidia/dts/tegra20-ventana.dts
+++ b/board/nvidia/dts/tegra20-ventana.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ ARCH_CPU_DTS
+#include "tegra20.dtsi"
/ {
model = "NVIDIA Tegra20 Ventana evaluation board";
@@ -8,6 +8,8 @@
aliases {
usb0 = "/usb@c5008000";
+ sdhci0 = "/sdhci@c8000600";
+ sdhci1 = "/sdhci@c8000400";
};
memory {
@@ -41,4 +43,17 @@
usb@c5004000 {
status = "disabled";
};
+
+ sdhci@c8000400 {
+ status = "okay";
+ cd-gpios = <&gpio 69 1>; /* gpio PI5 */
+ wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+ power-gpios = <&gpio 70 0>; /* gpio PI6 */
+ bus-width = <4>;
+ };
+
+ sdhci@c8000600 {
+ status = "okay";
+ bus-width = <8>;
+ };
};
diff --git a/board/nvidia/dts/tegra20-whistler.dts b/board/nvidia/dts/tegra20-whistler.dts
index 4579557..eb92264 100644
--- a/board/nvidia/dts/tegra20-whistler.dts
+++ b/board/nvidia/dts/tegra20-whistler.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ ARCH_CPU_DTS
+#include "tegra20.dtsi"
/ {
model = "NVIDIA Tegra20 Whistler evaluation board";
@@ -9,6 +9,8 @@
aliases {
i2c0 = "/i2c@7000d000";
usb0 = "/usb@c5008000";
+ sdhci0 = "/sdhci@c8000600";
+ sdhci1 = "/sdhci@c8000400";
};
memory {
@@ -57,4 +59,15 @@
usb@c5004000 {
status = "disabled";
};
+
+ sdhci@c8000400 {
+ status = "okay";
+ wp-gpios = <&gpio 173 0>; /* gpio PV5 */
+ bus-width = <8>;
+ };
+
+ sdhci@c8000600 {
+ status = "okay";
+ bus-width = <8>;
+ };
};
diff --git a/board/nvidia/dts/tegra30-cardhu.dts b/board/nvidia/dts/tegra30-cardhu.dts
index f9f80c5..4d22b48 100644
--- a/board/nvidia/dts/tegra30-cardhu.dts
+++ b/board/nvidia/dts/tegra30-cardhu.dts
@@ -1,7 +1,6 @@
/dts-v1/;
-/memreserve/ 0x1c000000 0x04000000;
-/include/ ARCH_CPU_DTS
+#include "tegra30.dtsi"
/ {
model = "NVIDIA Cardhu";
@@ -13,6 +12,8 @@
i2c2 = "/i2c@7000c400";
i2c3 = "/i2c@7000c500";
i2c4 = "/i2c@7000c700";
+ sdhci0 = "/sdhci@78000600";
+ sdhci1 = "/sdhci@78000000";
};
memory {
@@ -21,22 +22,27 @@
};
i2c@7000c000 {
+ status = "okay";
clock-frequency = <100000>;
};
i2c@7000c400 {
+ status = "okay";
clock-frequency = <100000>;
};
i2c@7000c500 {
+ status = "okay";
clock-frequency = <100000>;
};
i2c@7000c700 {
+ status = "okay";
clock-frequency = <100000>;
};
i2c@7000d000 {
+ status = "okay";
clock-frequency = <100000>;
};
@@ -44,4 +50,17 @@
status = "okay";
spi-max-frequency = <25000000>;
};
+
+ sdhci@78000000 {
+ status = "okay";
+ cd-gpios = <&gpio 69 1>; /* gpio PI5 */
+ wp-gpios = <&gpio 155 0>; /* gpio PT3 */
+ power-gpios = <&gpio 31 0>; /* gpio PD7 */
+ bus-width = <4>;
+ };
+
+ sdhci@78000600 {
+ status = "okay";
+ bus-width = <8>;
+ };
};
diff --git a/board/nvidia/harmony/harmony.c b/board/nvidia/harmony/harmony.c
index 93430ed..3122441 100644
--- a/board/nvidia/harmony/harmony.c
+++ b/board/nvidia/harmony/harmony.c
@@ -27,19 +27,14 @@
#include <asm/arch/funcmux.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/tegra.h>
-#include <asm/arch-tegra/mmc.h>
#include <asm/gpio.h>
-#ifdef CONFIG_TEGRA_MMC
-#include <mmc.h>
-#endif
-
#ifdef CONFIG_TEGRA_MMC
/*
* Routine: pin_mux_mmc
* Description: setup the pin muxes/tristate values for the SDMMC(s)
*/
-static void pin_mux_mmc(void)
+void pin_mux_mmc(void)
{
funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT);
funcmux_select(PERIPH_ID_SDMMC2, FUNCMUX_SDMMC2_DTA_DTD_8BIT);
@@ -54,25 +49,6 @@ static void pin_mux_mmc(void)
/* For CD GPIO PI5 */
pinmux_tristate_disable(PINGRP_ATC);
}
-
-/* this is a weak define that we are overriding */
-int board_mmc_init(bd_t *bd)
-{
- debug("board_mmc_init called\n");
-
- /* Enable muxes, etc. for SDMMC controllers */
- pin_mux_mmc();
-
- debug("board_mmc_init: init SD slot J26\n");
- /* init dev 0, SD slot J26, with 8-bit bus */
- tegra_mmc_init(0, 8, GPIO_PI6, GPIO_PH2);
-
- debug("board_mmc_init: init SD slot J5\n");
- /* init dev 2, SD slot J5, with 4-bit bus */
- tegra_mmc_init(2, 4, GPIO_PT3, GPIO_PI5);
-
- return 0;
-}
#endif
void pin_mux_usb(void)
diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c
index 3e33da0..e581fdd 100644
--- a/board/nvidia/seaboard/seaboard.c
+++ b/board/nvidia/seaboard/seaboard.c
@@ -28,11 +28,7 @@
#include <asm/arch/funcmux.h>
#include <asm/arch/gpio.h>
#include <asm/arch/pinmux.h>
-#include <asm/arch-tegra/mmc.h>
#include <asm/gpio.h>
-#ifdef CONFIG_TEGRA_MMC
-#include <mmc.h>
-#endif
/* TODO: Remove this code when the SPI switch is working */
#if !defined(CONFIG_SPI_UART_SWITCH) && (CONFIG_MACH_TYPE != MACH_TYPE_VENTANA)
@@ -51,7 +47,7 @@ void gpio_early_init_uart(void)
* Routine: pin_mux_mmc
* Description: setup the pin muxes/tristate values for the SDMMC(s)
*/
-static void pin_mux_mmc(void)
+void pin_mux_mmc(void)
{
funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT);
funcmux_select(PERIPH_ID_SDMMC3, FUNCMUX_SDMMC3_SDB_4BIT);
@@ -61,25 +57,6 @@ static void pin_mux_mmc(void)
/* For CD GPIO PI5 */
pinmux_tristate_disable(PINGRP_ATC);
}
-
-/* this is a weak define that we are overriding */
-int board_mmc_init(bd_t *bd)
-{
- debug("board_mmc_init called\n");
-
- /* Enable muxes, etc. for SDMMC controllers */
- pin_mux_mmc();
-
- debug("board_mmc_init: init eMMC\n");
- /* init dev 0, eMMC chip, with 8-bit bus */
- tegra_mmc_init(0, 8, -1, -1);
-
- debug("board_mmc_init: init SD slot\n");
- /* init dev 1, SD slot, with 4-bit bus */
- tegra_mmc_init(1, 4, GPIO_PI6, GPIO_PI5);
-
- return 0;
-}
#endif
void pin_mux_usb(void)
diff --git a/board/nvidia/whistler/whistler.c b/board/nvidia/whistler/whistler.c
index 592cd6b..f18aa27 100644
--- a/board/nvidia/whistler/whistler.c
+++ b/board/nvidia/whistler/whistler.c
@@ -27,32 +27,19 @@
#include <asm/arch/clock.h>
#include <asm/arch/funcmux.h>
#include <asm/arch/pinmux.h>
-#include <asm/arch-tegra/mmc.h>
#include <asm/gpio.h>
#include <i2c.h>
-#ifdef CONFIG_TEGRA_MMC
-#include <mmc.h>
-#endif
-
+#ifdef CONFIG_TEGRA_MMC
/*
* Routine: pin_mux_mmc
* Description: setup the pin muxes/tristate values for the SDMMC(s)
*/
-static void pin_mux_mmc(void)
-{
- funcmux_select(PERIPH_ID_SDMMC3, FUNCMUX_SDMMC3_SDB_SLXA_8BIT);
- funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATC_ATD_8BIT);
-}
-
-/* this is a weak define that we are overriding */
-int board_mmc_init(bd_t *bd)
+void pin_mux_mmc(void)
{
uchar val;
int ret;
- debug("board_mmc_init called\n");
-
/* Turn on MAX8907B LDO12 to 2.8V for J40 power */
ret = i2c_set_bus_num(0);
if (ret)
@@ -70,17 +57,10 @@ int board_mmc_init(bd_t *bd)
if (ret)
printf("i2c_write 0 0x3c 0x44 failed: %d\n", ret);
- /* Enable muxes, etc. for SDMMC controllers */
- pin_mux_mmc();
-
- /* init dev 0 (SDMMC4), (J29 "HSMMC") with 8-bit bus */
- tegra_mmc_init(0, 8, -1, -1);
-
- /* init dev 1 (SDMMC3), (J40 "SDIO3") with 8-bit bus */
- tegra_mmc_init(1, 8, -1, -1);
-
- return 0;
+ funcmux_select(PERIPH_ID_SDMMC3, FUNCMUX_SDMMC3_SDB_SLXA_8BIT);
+ funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATC_ATD_8BIT);
}
+#endif
/* this is a weak define that we are overriding */
void pin_mux_usb(void)
diff --git a/board/nx823/u-boot.lds b/board/nx823/u-boot.lds
index 3c1c05a..a1481c8 100644
--- a/board/nx823/u-boot.lds
+++ b/board/nx823/u-boot.lds
@@ -69,7 +69,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/nx823/u-boot.lds.debug b/board/nx823/u-boot.lds.debug
index 92796e6..614bbb2 100644
--- a/board/nx823/u-boot.lds.debug
+++ b/board/nx823/u-boot.lds.debug
@@ -109,7 +109,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/olimex/mx23_olinuxino/mx23_olinuxino.c b/board/olimex/mx23_olinuxino/mx23_olinuxino.c
index 6a6053b..9ed7718 100644
--- a/board/olimex/mx23_olinuxino/mx23_olinuxino.c
+++ b/board/olimex/mx23_olinuxino/mx23_olinuxino.c
@@ -23,11 +23,15 @@
*/
#include <common.h>
+#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/arch/iomux-mx23.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
+#ifdef CONFIG_STATUS_LED
+#include <status_led.h>
+#endif
DECLARE_GLOBAL_DATA_PTR;
@@ -42,6 +46,11 @@ int board_early_init_f(void)
/* SSP0 clock at 96MHz */
mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
+#ifdef CONFIG_CMD_USB
+ /* Enable LAN9512 */
+ gpio_direction_output(MX23_PAD_GPMI_ALE__GPIO_0_17, 1);
+#endif
+
return 0;
}
@@ -67,5 +76,9 @@ int board_init(void)
/* Adress of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
+ status_led_set(STATUS_LED_BOOT, STATUS_LED_STATE);
+#endif
+
return 0;
}
diff --git a/board/olimex/mx23_olinuxino/spl_boot.c b/board/olimex/mx23_olinuxino/spl_boot.c
index 7def8bc..a96c293 100644
--- a/board/olimex/mx23_olinuxino/spl_boot.c
+++ b/board/olimex/mx23_olinuxino/spl_boot.c
@@ -84,6 +84,10 @@ const iomux_cfg_t iomux_setup[] = {
MX23_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI,
MX23_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI,
+ /* Green LED */
+ MX23_PAD_SSP1_DETECT__GPIO_2_1 |
+ (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL),
+
/* MMC 0 */
MX23_PAD_SSP1_CMD__SSP1_CMD | MUX_CONFIG_SSP,
MX23_PAD_SSP1_DATA0__SSP1_DATA0 | MUX_CONFIG_SSP,
@@ -91,6 +95,10 @@ const iomux_cfg_t iomux_setup[] = {
MX23_PAD_SSP1_DATA2__SSP1_DATA2 | MUX_CONFIG_SSP,
MX23_PAD_SSP1_DATA3__SSP1_DATA3 | MUX_CONFIG_SSP,
MX23_PAD_SSP1_SCK__SSP1_SCK | MUX_CONFIG_SSP,
+
+ /* Ethernet */
+ MX23_PAD_GPMI_ALE__GPIO_0_17 |
+ (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL),
};
void board_init_ll(void)
diff --git a/board/openrisc/openrisc-generic/u-boot.lds b/board/openrisc/openrisc-generic/u-boot.lds
index 4cffacb..9024f30 100644
--- a/board/openrisc/openrisc-generic/u-boot.lds
+++ b/board/openrisc/openrisc-generic/u-boot.lds
@@ -29,7 +29,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
.rodata : {
diff --git a/board/overo/overo.c b/board/overo/overo.c
index fdf46a2..8690450 100644
--- a/board/overo/overo.c
+++ b/board/overo/overo.c
@@ -392,7 +392,6 @@ int board_eth_init(bd_t *bis)
#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0, 0, 0);
- return 0;
+ return omap_mmc_init(0, 0, 0, -1, -1);
}
#endif
diff --git a/board/pandora/pandora.c b/board/pandora/pandora.c
index 3a62e9d..9ff5dd7 100644
--- a/board/pandora/pandora.c
+++ b/board/pandora/pandora.c
@@ -139,7 +139,6 @@ void set_muxconf_regs(void)
#ifdef CONFIG_GENERIC_MMC
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0, 0, 0);
- return 0;
+ return omap_mmc_init(0, 0, 0, -1, -1);
}
#endif
diff --git a/board/phytec/pcm051/mux.c b/board/phytec/pcm051/mux.c
index 4d3a1d5..6e9c3d2 100644
--- a/board/phytec/pcm051/mux.c
+++ b/board/phytec/pcm051/mux.c
@@ -35,7 +35,6 @@ static struct module_pin_mux mmc0_pin_mux[] = {
{OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */
{OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */
{OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */
- {OFFSET(mcasp0_aclkr), (MODE(4) | RXACTIVE)}, /* MMC0_WP */
{OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)}, /* MMC0_CD */
{-1},
};
diff --git a/board/quantum/u-boot.lds b/board/quantum/u-boot.lds
index a507d73..3334a44 100644
--- a/board/quantum/u-boot.lds
+++ b/board/quantum/u-boot.lds
@@ -69,7 +69,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/r360mpi/u-boot.lds b/board/r360mpi/u-boot.lds
index 404eda0..ef3a17f 100644
--- a/board/r360mpi/u-boot.lds
+++ b/board/r360mpi/u-boot.lds
@@ -71,7 +71,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/rbc823/u-boot.lds b/board/rbc823/u-boot.lds
index bb3b9de..b354409 100644
--- a/board/rbc823/u-boot.lds
+++ b/board/rbc823/u-boot.lds
@@ -80,7 +80,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = .;
diff --git a/board/renesas/sh7752evb/u-boot.lds b/board/renesas/sh7752evb/u-boot.lds
index d568312..276f525 100644
--- a/board/renesas/sh7752evb/u-boot.lds
+++ b/board/renesas/sh7752evb/u-boot.lds
@@ -78,7 +78,7 @@ SECTIONS
PROVIDE (_egot = .);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
PROVIDE (reloc_dst_end = .);
diff --git a/board/renesas/sh7757lcr/u-boot.lds b/board/renesas/sh7757lcr/u-boot.lds
index 49d6500..5882427 100644
--- a/board/renesas/sh7757lcr/u-boot.lds
+++ b/board/renesas/sh7757lcr/u-boot.lds
@@ -79,7 +79,7 @@ SECTIONS
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
PROVIDE (reloc_dst_end = .);
diff --git a/board/rsdproto/u-boot.lds b/board/rsdproto/u-boot.lds
index ec8cddd..240b936 100644
--- a/board/rsdproto/u-boot.lds
+++ b/board/rsdproto/u-boot.lds
@@ -100,7 +100,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/samsung/smdk5250/smdk5250-uboot-spl.lds b/board/samsung/smdk5250/smdk5250-uboot-spl.lds
index 48ad60c..4c8baaa 100644
--- a/board/samsung/smdk5250/smdk5250-uboot-spl.lds
+++ b/board/samsung/smdk5250/smdk5250-uboot-spl.lds
@@ -49,7 +49,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
} >.sram
. = ALIGN(4);
diff --git a/board/samsung/smdk6400/u-boot-nand.lds b/board/samsung/smdk6400/u-boot-nand.lds
index 3bf2ae1..64c650d 100644
--- a/board/samsung/smdk6400/u-boot-nand.lds
+++ b/board/samsung/smdk6400/u-boot-nand.lds
@@ -50,7 +50,7 @@ SECTIONS
. = align(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
. = align(4);
diff --git a/board/sandburst/karef/u-boot.lds.debug b/board/sandburst/karef/u-boot.lds.debug
index 7a0757f..6b99f13 100644
--- a/board/sandburst/karef/u-boot.lds.debug
+++ b/board/sandburst/karef/u-boot.lds.debug
@@ -118,7 +118,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/sandburst/metrobox/u-boot.lds.debug b/board/sandburst/metrobox/u-boot.lds.debug
index 07bd6fe..0b4192e 100644
--- a/board/sandburst/metrobox/u-boot.lds.debug
+++ b/board/sandburst/metrobox/u-boot.lds.debug
@@ -118,7 +118,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/sandpoint/u-boot.lds b/board/sandpoint/u-boot.lds
index 65c1dbd..95e13c4 100644
--- a/board/sandpoint/u-boot.lds
+++ b/board/sandpoint/u-boot.lds
@@ -71,7 +71,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/sixnet/u-boot.lds b/board/sixnet/u-boot.lds
index ce3026f..66c5fba 100644
--- a/board/sixnet/u-boot.lds
+++ b/board/sixnet/u-boot.lds
@@ -69,7 +69,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/snmc/qs850/u-boot.lds b/board/snmc/qs850/u-boot.lds
index 749980f..285e897 100644
--- a/board/snmc/qs850/u-boot.lds
+++ b/board/snmc/qs850/u-boot.lds
@@ -72,7 +72,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/snmc/qs860t/u-boot.lds b/board/snmc/qs860t/u-boot.lds
index a507d73..3334a44 100644
--- a/board/snmc/qs860t/u-boot.lds
+++ b/board/snmc/qs860t/u-boot.lds
@@ -69,7 +69,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/spc1920/u-boot.lds b/board/spc1920/u-boot.lds
index a507d73..3334a44 100644
--- a/board/spc1920/u-boot.lds
+++ b/board/spc1920/u-boot.lds
@@ -69,7 +69,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/spd8xx/u-boot.lds b/board/spd8xx/u-boot.lds
index 905c91d..58f2565 100644
--- a/board/spd8xx/u-boot.lds
+++ b/board/spd8xx/u-boot.lds
@@ -78,7 +78,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/spd8xx/u-boot.lds.debug b/board/spd8xx/u-boot.lds.debug
index 4155b60..063f2cc 100644
--- a/board/spd8xx/u-boot.lds.debug
+++ b/board/spd8xx/u-boot.lds.debug
@@ -110,7 +110,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/stx/stxxtc/u-boot.lds b/board/stx/stxxtc/u-boot.lds
index e63a8c9..03891e9 100644
--- a/board/stx/stxxtc/u-boot.lds
+++ b/board/stx/stxxtc/u-boot.lds
@@ -69,7 +69,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/stx/stxxtc/u-boot.lds.debug b/board/stx/stxxtc/u-boot.lds.debug
index 900da64..e1fe052 100644
--- a/board/stx/stxxtc/u-boot.lds.debug
+++ b/board/stx/stxxtc/u-boot.lds.debug
@@ -109,7 +109,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/svm_sc8xx/u-boot.lds b/board/svm_sc8xx/u-boot.lds
index 5d3d8f2..99b8bfa 100644
--- a/board/svm_sc8xx/u-boot.lds
+++ b/board/svm_sc8xx/u-boot.lds
@@ -86,7 +86,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/technexion/twister/twister.c b/board/technexion/twister/twister.c
index fa0ace0..a28c704 100644
--- a/board/technexion/twister/twister.c
+++ b/board/technexion/twister/twister.c
@@ -147,7 +147,7 @@ int board_eth_init(bd_t *bis)
!defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
- return omap_mmc_init(0, 0, 0);
+ return omap_mmc_init(0, 0, 0, -1, -1);
}
#endif
diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c
index c516c75..d576786 100644
--- a/board/teejet/mt_ventoux/mt_ventoux.c
+++ b/board/teejet/mt_ventoux/mt_ventoux.c
@@ -81,6 +81,7 @@ static struct panel_config lcd_cfg[] = {
.data_lines = 0x03, /* 24 Bit RGB */
.load_mode = 0x02, /* Frame Mode */
.panel_color = 0,
+ .gfx_format = GFXFORMAT_RGB24_UNPACKED,
},
{
.timing_h = PANEL_TIMING_H(20, 192, 4),
@@ -91,6 +92,7 @@ static struct panel_config lcd_cfg[] = {
.data_lines = 0x03, /* 24 Bit RGB */
.load_mode = 0x02, /* Frame Mode */
.panel_color = 0,
+ .gfx_format = GFXFORMAT_RGB24_UNPACKED,
}
};
#endif
@@ -304,7 +306,7 @@ int board_eth_init(bd_t *bis)
!defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
- return omap_mmc_init(0, 0, 0);
+ return omap_mmc_init(0, 0, 0, -1, -1);
}
#endif
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index 48e6896..f4b972b 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -73,7 +73,7 @@ static inline int board_is_idk(void)
return !strncmp(header.config, "SKU#02", 6);
}
-static int board_is_gp_evm(void)
+static int __maybe_unused board_is_gp_evm(void)
{
return !strncmp("A33515BB", header.name, 8);
}
@@ -389,7 +389,8 @@ int board_late_init(void)
}
#endif
-#ifdef CONFIG_DRIVER_TI_CPSW
+#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
+ (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
static void cpsw_control(int enabled)
{
/* VTP can be added here */
@@ -434,26 +435,26 @@ static struct cpsw_platform_data cpsw_data = {
int board_eth_init(bd_t *bis)
{
int rv, n = 0;
-#ifdef CONFIG_DRIVER_TI_CPSW
uint8_t mac_addr[6];
uint32_t mac_hi, mac_lo;
- if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
- printf("<ethaddr> not set. Reading from E-fuse\n");
- /* try reading mac address from efuse */
- mac_lo = readl(&cdev->macid0l);
- mac_hi = readl(&cdev->macid0h);
- mac_addr[0] = mac_hi & 0xFF;
- mac_addr[1] = (mac_hi & 0xFF00) >> 8;
- mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
- mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
- mac_addr[4] = mac_lo & 0xFF;
- mac_addr[5] = (mac_lo & 0xFF00) >> 8;
+ /* try reading mac address from efuse */
+ mac_lo = readl(&cdev->macid0l);
+ mac_hi = readl(&cdev->macid0h);
+ mac_addr[0] = mac_hi & 0xFF;
+ mac_addr[1] = (mac_hi & 0xFF00) >> 8;
+ mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
+ mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
+ mac_addr[4] = mac_lo & 0xFF;
+ mac_addr[5] = (mac_lo & 0xFF00) >> 8;
+
+#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
+ (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
+ if (!getenv("ethaddr")) {
+ printf("<ethaddr> not set. Validating first E-fuse MAC\n");
if (is_valid_ether_addr(mac_addr))
eth_setenv_enetaddr("ethaddr", mac_addr);
- else
- goto try_usbether;
}
if (board_is_bone() || board_is_bone_lt() || board_is_idk()) {
@@ -494,8 +495,11 @@ int board_eth_init(bd_t *bis)
AR8051_RGMII_TX_CLK_DLY);
}
#endif
-try_usbether:
-#if defined(CONFIG_USB_ETHER) && !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_USB_ETHER) && \
+ (!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_USBETH_SUPPORT))
+ if (is_valid_ether_addr(mac_addr))
+ eth_setenv_enetaddr("usbnet_devaddr", mac_addr);
+
rv = usb_eth_initialize(bis);
if (rv < 0)
printf("Error %d registering USB_ETHER\n", rv);
diff --git a/board/ti/am3517crane/am3517crane.c b/board/ti/am3517crane/am3517crane.c
index 888398d..0b94245 100644
--- a/board/ti/am3517crane/am3517crane.c
+++ b/board/ti/am3517crane/am3517crane.c
@@ -78,7 +78,6 @@ void set_muxconf_regs(void)
#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0, 0, 0);
- return 0;
+ return omap_mmc_init(0, 0, 0, -1, -1);
}
#endif
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index b829a79..3d9b6dd 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -72,6 +72,7 @@
#define BBTOYS_LCD 0x03000B00
#define BCT_BRETTL3 0x01000F00
#define BCT_BRETTL4 0x02000F00
+#define LSR_COM6L_ADPT 0x01001300
#define BEAGLE_NO_EEPROM 0xffffffff
DECLARE_GLOBAL_DATA_PTR;
@@ -227,6 +228,14 @@ static unsigned int get_expansion_id(void)
i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config,
sizeof(expansion_config));
+ /* retry reading configuration data with 16bit addressing */
+ if ((expansion_config.device_vendor == 0xFFFFFF00) ||
+ (expansion_config.device_vendor == 0xFFFFFFFF)) {
+ printf("EEPROM is blank or 8bit addressing failed: retrying with 16bit:\n");
+ i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 2, (u8 *)&expansion_config,
+ sizeof(expansion_config));
+ }
+
i2c_set_bus_num(TWL4030_I2C_BUS);
return expansion_config.device_vendor;
@@ -454,6 +463,11 @@ int misc_init_r(void)
case BCT_BRETTL4:
printf("Recognized bct electronic GmbH brettl4 board\n");
break;
+ case LSR_COM6L_ADPT:
+ printf("Recognized LSR COM6L Adapter Board\n");
+ MUX_BBTOYS_WIFI()
+ setenv("buddy", "lsr-com6l-adpt");
+ break;
case BEAGLE_NO_EEPROM:
printf("No EEPROM on expansion board\n");
setenv("buddy", "none");
@@ -518,8 +532,7 @@ void set_muxconf_regs(void)
#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0, 0, 0);
- return 0;
+ return omap_mmc_init(0, 0, 0, -1, -1);
}
#endif
diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h
index c0a94a9..6d71bbc 100644
--- a/board/ti/beagle/beagle.h
+++ b/board/ti/beagle/beagle.h
@@ -544,7 +544,8 @@ static const struct panel_config dvid_cfg = {
.panel_type = 0x01, /* TFT */
.data_lines = 0x03, /* 24 Bit RGB */
.load_mode = 0x02, /* Frame Mode */
- .panel_color = DVI_BEAGLE_ORANGE_COL /* ORANGE */
+ .panel_color = DVI_BEAGLE_ORANGE_COL, /* ORANGE */
+ .gfx_format = GFXFORMAT_RGB24_UNPACKED,
};
static const struct panel_config dvid_cfg_xm = {
@@ -556,6 +557,7 @@ static const struct panel_config dvid_cfg_xm = {
.panel_type = 0x01, /* TFT */
.data_lines = 0x03, /* 24 Bit RGB */
.load_mode = 0x02, /* Frame Mode */
- .panel_color = DVI_BEAGLE_ORANGE_COL /* ORANGE */
+ .panel_color = DVI_BEAGLE_ORANGE_COL, /* ORANGE */
+ .gfx_format = GFXFORMAT_RGB24_UNPACKED,
};
#endif
diff --git a/board/ns9750dev/Makefile b/board/ti/dra7xx/Makefile
index 0d082c5..db6da5b 100644
--- a/board/ns9750dev/Makefile
+++ b/board/ti/dra7xx/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# (C) Copyright 2013
+# Texas Instruments, <www.ti.com>
#
# See file CREDITS for list of people who contributed to this
# project.
@@ -12,7 +12,7 @@
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
@@ -25,15 +25,19 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
-COBJS := ns9750dev.o flash.o led.o
-SOBJS := lowlevel_init.o
+COBJS := evm.o
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+clean:
+ rm -f $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
#########################################################################
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
new file mode 100644
index 0000000..7bbb549
--- /dev/null
+++ b/board/ti/dra7xx/evm.c
@@ -0,0 +1,103 @@
+/*
+ * (C) Copyright 2013
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * Lokesh Vutla <lokeshvutla@ti.com>
+ *
+ * Based on previous work by:
+ * Aneesh V <aneesh@ti.com>
+ * Steve Sakoman <steve@sakoman.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <twl6035.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mmc_host_def.h>
+
+#include "mux_data.h"
+
+#ifdef CONFIG_USB_EHCI
+#include <usb.h>
+#include <asm/arch/ehci.h>
+#include <asm/ehci-omap.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+const struct omap_sysinfo sysinfo = {
+ "Board: DRA7xx\n"
+};
+
+/**
+ * @brief board_init
+ *
+ * @return 0
+ */
+int board_init(void)
+{
+ gpmc_init();
+ gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */
+
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ return 0;
+}
+
+/**
+ * @brief misc_init_r - Configure EVM board specific configurations
+ * such as power configurations, ethernet initialization as phase2 of
+ * boot sequence
+ *
+ * @return 0
+ */
+int misc_init_r(void)
+{
+ return 0;
+}
+
+static void do_set_mux32(u32 base,
+ struct pad_conf_entry const *array, int size)
+{
+ int i;
+ struct pad_conf_entry *pad = (struct pad_conf_entry *)array;
+
+ for (i = 0; i < size; i++, pad++)
+ writel(pad->val, base + pad->offset);
+}
+
+void set_muxconf_regs_essential(void)
+{
+ do_set_mux32((*ctrl)->control_padconf_core_base,
+ core_padconf_array_essential,
+ sizeof(core_padconf_array_essential) /
+ sizeof(struct pad_conf_entry));
+}
+
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
+int board_mmc_init(bd_t *bis)
+{
+ omap_mmc_init(0, 0, 0, -1, -1);
+ omap_mmc_init(1, 0, 0, -1, -1);
+ return 0;
+}
+#endif
diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h
new file mode 100644
index 0000000..04c95fd
--- /dev/null
+++ b/board/ti/dra7xx/mux_data.h
@@ -0,0 +1,47 @@
+/*
+ * (C) Copyright 2013
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * Sricharan R <r.sricharan@ti.com>
+ * Nishant Kamat <nskamat@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _MUX_DATA_DRA7XX_H_
+#define _MUX_DATA_DRA7XX_H_
+
+#include <asm/arch/mux_dra7xx.h>
+
+const struct pad_conf_entry core_padconf_array_essential[] = {
+ {MMC1_CLK, (PTU | IEN | M0)}, /* MMC1_CLK */
+ {MMC1_CMD, (PTU | IEN | M0)}, /* MMC1_CMD */
+ {MMC1_DAT0, (PTU | IEN | M0)}, /* MMC1_DAT0 */
+ {MMC1_DAT1, (PTU | IEN | M0)}, /* MMC1_DAT1 */
+ {MMC1_DAT2, (PTU | IEN | M0)}, /* MMC1_DAT2 */
+ {MMC1_DAT3, (PTU | IEN | M0)}, /* MMC1_DAT3 */
+ {MMC1_SDCD, (PTU | IEN | M0)}, /* MMC1_SDCD */
+ {MMC1_SDWP, (PTU | IEN | M0)}, /* MMC1_SDWP */
+ {UART1_RXD, (PTU | IEN | M0)}, /* UART1_RXD */
+ {UART1_TXD, (M0)}, /* UART1_TXD */
+ {UART1_CTSN, (PTU | IEN | M0)}, /* UART1_CTSN */
+ {UART1_RTSN, (M0)}, /* UART1_RTSN */
+ {I2C1_SDA, (PTU | IEN | M0)}, /* I2C1_SDA */
+ {I2C1_SCL, (PTU | IEN | M0)}, /* I2C1_SCL */
+};
+#endif /* _MUX_DATA_DRA7XX_H_ */
diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c
index 8a3aa0c..3c2dcab 100644
--- a/board/ti/evm/evm.c
+++ b/board/ti/evm/evm.c
@@ -277,7 +277,6 @@ int board_eth_init(bd_t *bis)
#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0, 0, 0);
- return 0;
+ return omap_mmc_init(0, 0, 0, -1, -1);
}
#endif
diff --git a/board/ti/omap5_evm/evm.c b/board/ti/omap5_evm/evm.c
index c8dfdf8..55337c0 100644
--- a/board/ti/omap5_evm/evm.c
+++ b/board/ti/omap5_evm/evm.c
@@ -94,8 +94,8 @@ void set_muxconf_regs_non_essential(void)
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0, 0, 0);
- omap_mmc_init(1, 0, 0);
+ omap_mmc_init(0, 0, 0, -1, -1);
+ omap_mmc_init(1, 0, 0, -1, -1);
return 0;
}
#endif
diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c
index 4feef78..cab0598 100644
--- a/board/ti/panda/panda.c
+++ b/board/ti/panda/panda.c
@@ -179,8 +179,7 @@ void set_muxconf_regs_non_essential(void)
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0, 0, 0);
- return 0;
+ return omap_mmc_init(0, 0, 0, -1, -1);
}
#endif
diff --git a/board/ti/sdp3430/sdp.c b/board/ti/sdp3430/sdp.c
index 9a1c012..052efc5 100644
--- a/board/ti/sdp3430/sdp.c
+++ b/board/ti/sdp3430/sdp.c
@@ -209,7 +209,6 @@ void set_muxconf_regs(void)
#ifdef CONFIG_GENERIC_MMC
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0, 0, 0);
- return 0;
+ return omap_mmc_init(0, 0, 0, -1, -1);
}
#endif
diff --git a/board/ti/sdp4430/sdp.c b/board/ti/sdp4430/sdp.c
index 982c771..4c1a4f7 100644
--- a/board/ti/sdp4430/sdp.c
+++ b/board/ti/sdp4430/sdp.c
@@ -108,8 +108,8 @@ void set_muxconf_regs_non_essential(void)
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0, 0, 0);
- omap_mmc_init(1, 0, 0);
+ omap_mmc_init(0, 0, 0, -1, -1);
+ omap_mmc_init(1, 0, 0, -1, -1);
return 0;
}
#endif
diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c
index b88d978..ebff59e 100644
--- a/board/timll/devkit8000/devkit8000.c
+++ b/board/timll/devkit8000/devkit8000.c
@@ -136,8 +136,7 @@ void set_muxconf_regs(void)
#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0, 0, 0);
- return 0;
+ return omap_mmc_init(0, 0, 0, -1, -1);
}
#endif
diff --git a/board/toradex/colibri_t20_iris/colibri_t20_iris.c b/board/toradex/colibri_t20_iris/colibri_t20_iris.c
index e40a986..aa76f65 100644
--- a/board/toradex/colibri_t20_iris/colibri_t20_iris.c
+++ b/board/toradex/colibri_t20_iris/colibri_t20_iris.c
@@ -19,7 +19,6 @@
#include <asm/arch/funcmux.h>
#include <asm/arch/pinmux.h>
#include <asm/arch-tegra/board.h>
-#include <asm/arch-tegra/mmc.h>
#include "../colibri_t20-common/colibri_t20-common.h"
@@ -34,13 +33,13 @@ void pin_mux_usb(void)
#endif
#ifdef CONFIG_TEGRA_MMC
-int board_mmc_init(bd_t *bd)
+/*
+ * Routine: pin_mux_mmc
+ * Description: setup the pin muxes/tristate values for the SDMMC(s)
+ */
+void pin_mux_mmc(void)
{
funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_4_BIT);
pinmux_tristate_disable(PINGRP_GMB);
-
- tegra_mmc_init(0, 4, -1, GPIO_PC7);
-
- return 0;
}
#endif
diff --git a/board/toradex/dts/tegra20-colibri_t20_iris.dts b/board/toradex/dts/tegra20-colibri_t20_iris.dts
index c29b43a..c0e54af 100644
--- a/board/toradex/dts/tegra20-colibri_t20_iris.dts
+++ b/board/toradex/dts/tegra20-colibri_t20_iris.dts
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ ARCH_CPU_DTS
+#include "tegra20.dtsi"
/ {
model = "Toradex Colibri T20";
@@ -10,6 +10,7 @@
usb0 = "/usb@c5008000";
usb1 = "/usb@c5000000";
usb2 = "/usb@c5004000";
+ sdhci0 = "/sdhci@c8000600";
};
usb@c5000000 {
@@ -35,4 +36,10 @@
compatible = "nand-flash";
};
};
+
+ sdhci@c8000600 {
+ status = "okay";
+ cd-gpios = <&gpio 23 1>; /* gpio PC7 */
+ bus-width = <4>;
+ };
};
diff --git a/board/tqc/tqm8xx/u-boot.lds b/board/tqc/tqm8xx/u-boot.lds
index bcc618c..fbf321d 100644
--- a/board/tqc/tqm8xx/u-boot.lds
+++ b/board/tqc/tqm8xx/u-boot.lds
@@ -82,7 +82,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/v37/u-boot.lds b/board/v37/u-boot.lds
index cdd73fa..f25a01b 100644
--- a/board/v37/u-boot.lds
+++ b/board/v37/u-boot.lds
@@ -69,7 +69,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/vpac270/u-boot-spl.lds b/board/vpac270/u-boot-spl.lds
index 5d66c13..dc437d1 100644
--- a/board/vpac270/u-boot-spl.lds
+++ b/board/vpac270/u-boot-spl.lds
@@ -57,10 +57,6 @@ SECTIONS
*(.data)
}
- .u_boot_list : {
- #include <u-boot.lst>
- }
-
. = ALIGN(4);
.rel.dyn : {
diff --git a/board/w7o/u-boot.lds.debug b/board/w7o/u-boot.lds.debug
index 2ce5a9a..18b7752 100644
--- a/board/w7o/u-boot.lds.debug
+++ b/board/w7o/u-boot.lds.debug
@@ -109,7 +109,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/board/xes/xpedite1000/u-boot.lds.debug b/board/xes/xpedite1000/u-boot.lds.debug
index c4e5706..c02581d 100644
--- a/board/xes/xpedite1000/u-boot.lds.debug
+++ b/board/xes/xpedite1000/u-boot.lds.debug
@@ -114,7 +114,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/boards.cfg b/boards.cfg
index 2b408f5..ee68fdd 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -95,6 +95,7 @@ at91sam9g10ek_nandflash arm arm926ejs at91sam9261ek atmel
at91sam9g20ek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_DATAFLASH_CS0
at91sam9g20ek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_DATAFLASH_CS1
at91sam9g20ek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_NANDFLASH
+at91sam9g20ek_2mmc_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,AT91SAM9G20EK_2MMC,SYS_USE_NANDFLASH
at91sam9m10g45ek_nandflash arm arm926ejs at91sam9m10g45ek atmel at91 at91sam9m10g45ek:AT91SAM9M10G45,SYS_USE_NANDFLASH
at91sam9rlek_dataflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_DATAFLASH
at91sam9rlek_nandflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_NANDFLASH
@@ -233,11 +234,13 @@ integratorap_cm946es arm arm946es integrator armltd
integratorcp_cm946es arm arm946es integrator armltd - integratorcp:CM946ES
ca9x4_ct_vxp arm armv7 vexpress armltd
am335x_evm arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1
+am335x_evm_spiboot arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1,SPI_BOOT
am335x_evm_uart1 arm armv7 am335x ti am33xx am335x_evm:SERIAL2,CONS_INDEX=2
am335x_evm_uart2 arm armv7 am335x ti am33xx am335x_evm:SERIAL3,CONS_INDEX=3
am335x_evm_uart3 arm armv7 am335x ti am33xx am335x_evm:SERIAL4,CONS_INDEX=4
am335x_evm_uart4 arm armv7 am335x ti am33xx am335x_evm:SERIAL5,CONS_INDEX=5
am335x_evm_uart5 arm armv7 am335x ti am33xx am335x_evm:SERIAL6,CONS_INDEX=6
+am335x_evm_usbspl arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1,SPL_USBETH_SUPPORT
pcm051 arm armv7 pcm051 phytec am33xx pcm051
highbank arm armv7 highbank - highbank
mx51_efikamx arm armv7 mx51_efikamx genesi mx5 mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg
@@ -254,6 +257,12 @@ mx6qsabreauto arm armv7 mx6qsabreauto freesca
mx6qsabrelite arm armv7 mx6qsabrelite freescale mx6 mx6qsabrelite:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
mx6qsabresd arm armv7 mx6qsabresd freescale mx6 mx6qsabresd:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
eco5pk arm armv7 eco5pk 8dtech omap3
+nitrogen6dl arm armv7 nitrogen6x boundary mx6 nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL,DDR_MB=1024
+nitrogen6dl2g arm armv7 nitrogen6x boundary mx6 nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl2g.cfg,MX6DL,DDR_MB=2048
+nitrogen6q arm armv7 nitrogen6x boundary mx6 nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024
+nitrogen6q2g arm armv7 nitrogen6x boundary mx6 nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q2g.cfg,MX6Q,DDR_MB=2048
+nitrogen6s arm armv7 nitrogen6x boundary mx6 nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s.cfg,MX6S,DDR_MB=512
+nitrogen6s1g arm armv7 nitrogen6x boundary mx6 nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024
cm_t35 arm armv7 cm_t35 - omap3
omap3_overo arm armv7 overo - omap3
omap3_pandora arm armv7 pandora - omap3
@@ -262,6 +271,7 @@ igep0020 arm armv7 igep00x0 isee
igep0020_nand arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND
igep0030 arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND
igep0030_nand arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND
+igep0032 arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0032,BOOT_ONENAND
am3517_evm arm armv7 am3517evm logicpd omap3
mt_ventoux arm armv7 mt_ventoux teejet omap3
omap3_zoom1 arm armv7 zoom1 logicpd omap3
@@ -282,6 +292,7 @@ nokia_rx51 arm armv7 rx51 nokia
omap4_panda arm armv7 panda ti omap4
omap4_sdp4430 arm armv7 sdp4430 ti omap4
omap5_evm arm armv7 omap5_evm ti omap5
+dra7xx_evm arm armv7 dra7xx ti omap5
s5p_goni arm armv7 goni samsung s5pc1xx
smdkc100 arm armv7 smdkc100 samsung s5pc1xx
origen arm armv7 origen samsung exynos
@@ -301,6 +312,7 @@ snowball arm armv7 snowball st-e
kzm9g arm armv7 kzm9g kmc rmobile
armadillo-800eva arm armv7 armadillo-800eva atmark-techno rmobile
zynq arm armv7 zynq xilinx zynq
+zynq_dcc arm armv7 zynq xilinx zynq zynq:ZYNQ_DCC
socfpga_cyclone5 arm armv7 socfpga_cyclone5 altera socfpga
actux1_4_16 arm ixp actux1 - - actux1:FLASH2X2
actux1_4_32 arm ixp actux1 - - actux1:FLASH2X2,RAM_32MB
diff --git a/common/cmd_help.c b/common/cmd_help.c
index f832a96..d9bdc4d 100644
--- a/common/cmd_help.c
+++ b/common/cmd_help.c
@@ -41,7 +41,7 @@ U_BOOT_CMD(
);
/* This does not use the U_BOOT_CMD macro as ? can't be used in symbol names */
-ll_entry_declare(cmd_tbl_t, question_mark, cmd, cmd) = {
+ll_entry_declare(cmd_tbl_t, question_mark, cmd) = {
"?", CONFIG_SYS_MAXARGS, 1, do_help,
"alias for 'help'",
#ifdef CONFIG_SYS_LONGHELP
diff --git a/common/cmd_led.c b/common/cmd_led.c
index c725f95..84f79fa 100644
--- a/common/cmd_led.c
+++ b/common/cmd_led.c
@@ -110,13 +110,15 @@ int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
if (led_commands[i].on)
led_commands[i].on();
else
- __led_set(led_commands[i].mask, STATUS_LED_ON);
+ __led_set(led_commands[i].mask,
+ STATUS_LED_ON);
break;
case LED_OFF:
if (led_commands[i].off)
led_commands[i].off();
else
- __led_set(led_commands[i].mask, STATUS_LED_OFF);
+ __led_set(led_commands[i].mask,
+ STATUS_LED_OFF);
break;
case LED_TOGGLE:
if (led_commands[i].toggle)
diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c
index 7dacd51..8c53a10 100644
--- a/common/cmd_mmc.c
+++ b/common/cmd_mmc.c
@@ -282,6 +282,13 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
mmc_init(mmc);
+ if ((state == MMC_WRITE || state == MMC_ERASE)) {
+ if (mmc_getwp(mmc) == 1) {
+ printf("Error: card is write protected!\n");
+ return 1;
+ }
+ }
+
switch (state) {
case MMC_READ:
n = mmc->block_dev.block_read(curr_device, blk,
diff --git a/common/cmd_sata.c b/common/cmd_sata.c
index b401bd1..8d57285 100644
--- a/common/cmd_sata.c
+++ b/common/cmd_sata.c
@@ -196,7 +196,7 @@ static int do_sata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
U_BOOT_CMD(
sata, 5, 1, do_sata,
"SATA sub system",
- "sata init - init SATA sub system\n"
+ "init - init SATA sub system\n"
"sata info - show available SATA devices\n"
"sata device [dev] - show or set current device\n"
"sata part [dev] - print partition table\n"
diff --git a/common/lcd.c b/common/lcd.c
index 66d4f94..590bbb9 100644
--- a/common/lcd.c
+++ b/common/lcd.c
@@ -33,6 +33,8 @@
#include <common.h>
#include <command.h>
#include <stdarg.h>
+#include <search.h>
+#include <env_callback.h>
#include <linux/types.h>
#include <stdio_dev.h>
#if defined(CONFIG_POST)
@@ -1034,6 +1036,18 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
}
#endif
+#ifdef CONFIG_SPLASH_SCREEN_PREPARE
+static inline int splash_screen_prepare(void)
+{
+ return board_splash_screen_prepare();
+}
+#else
+static inline int splash_screen_prepare(void)
+{
+ return 0;
+}
+#endif
+
static void *lcd_logo(void)
{
#ifdef CONFIG_SPLASH_SCREEN
@@ -1045,6 +1059,9 @@ static void *lcd_logo(void)
int x = 0, y = 0;
do_splash = 0;
+ if (splash_screen_prepare())
+ return (void *)gd->fb_base;
+
addr = simple_strtoul (s, NULL, 16);
#ifdef CONFIG_SPLASH_SCREEN_ALIGN
s = getenv("splashpos");
@@ -1084,6 +1101,30 @@ static void *lcd_logo(void)
#endif /* CONFIG_LCD_LOGO && !CONFIG_LCD_INFO_BELOW_LOGO */
}
+#ifdef CONFIG_SPLASHIMAGE_GUARD
+static int on_splashimage(const char *name, const char *value, enum env_op op,
+ int flags)
+{
+ ulong addr;
+ int aligned;
+
+ if (op == env_op_delete)
+ return 0;
+
+ addr = simple_strtoul(value, NULL, 16);
+ /* See README.displaying-bmps */
+ aligned = (addr % 4 == 2);
+ if (!aligned) {
+ printf("Invalid splashimage value. Value must be 16 bit aligned, but not 32 bit aligned\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+U_BOOT_ENV_CALLBACK(splashimage, on_splashimage);
+#endif
+
void lcd_position_cursor(unsigned col, unsigned row)
{
console_col = min(col, CONSOLE_COLS - 1);
diff --git a/common/spl/Makefile b/common/spl/Makefile
index 5698a23..da2afc1 100644
--- a/common/spl/Makefile
+++ b/common/spl/Makefile
@@ -18,6 +18,7 @@ COBJS-$(CONFIG_SPL_FRAMEWORK) += spl.o
COBJS-$(CONFIG_SPL_NOR_SUPPORT) += spl_nor.o
COBJS-$(CONFIG_SPL_YMODEM_SUPPORT) += spl_ymodem.o
COBJS-$(CONFIG_SPL_NAND_SUPPORT) += spl_nand.o
+COBJS-$(CONFIG_SPL_ONENAND_SUPPORT) += spl_onenand.o
COBJS-$(CONFIG_SPL_NET_SUPPORT) += spl_net.o
endif
diff --git a/common/spl/spl.c b/common/spl/spl.c
index ff9ba7b..6715e0d 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -197,6 +197,11 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
spl_nand_load_image();
break;
#endif
+#ifdef CONFIG_SPL_ONENAND_SUPPORT
+ case BOOT_DEVICE_ONENAND:
+ spl_onenand_load_image();
+ break;
+#endif
#ifdef CONFIG_SPL_NOR_SUPPORT
case BOOT_DEVICE_NOR:
spl_nor_load_image();
@@ -221,6 +226,11 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
#endif
break;
#endif
+#ifdef CONFIG_SPL_USBETH_SUPPORT
+ case BOOT_DEVICE_USBETH:
+ spl_net_load_image("usb_ether");
+ break;
+#endif
default:
debug("SPL: Un-supported Boot Device\n");
hang();
diff --git a/common/spl/spl_onenand.c b/common/spl/spl_onenand.c
new file mode 100644
index 0000000..4349303
--- /dev/null
+++ b/common/spl/spl_onenand.c
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2013
+ * ISEE 2007 SL - Enric Balletbo i Serra <eballetbo@iseebcn.com>
+ *
+ * Based on common/spl/spl_nand.c
+ * Copyright (C) 2011
+ * Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <config.h>
+#include <spl.h>
+#include <asm/io.h>
+#include <onenand_uboot.h>
+
+void spl_onenand_load_image(void)
+{
+ struct image_header *header;
+
+ debug("spl: onenand\n");
+
+ /*use CONFIG_SYS_TEXT_BASE as temporary storage area */
+ header = (struct image_header *)(CONFIG_SYS_TEXT_BASE);
+ /* Load u-boot */
+ onenand_spl_load_image(CONFIG_SYS_ONENAND_U_BOOT_OFFS,
+ CONFIG_SYS_ONENAND_PAGE_SIZE, (void *)header);
+ spl_parse_image_header(header);
+ onenand_spl_load_image(CONFIG_SYS_ONENAND_U_BOOT_OFFS,
+ spl_image.size, (void *)spl_image.load_addr);
+}
diff --git a/config.mk b/config.mk
index 9886415..4e6a19b 100644
--- a/config.mk
+++ b/config.mk
@@ -23,8 +23,6 @@
#########################################################################
-include $(TOPDIR)/helper.mk
-
ifeq ($(CURDIR),$(SRCTREE))
dir :=
else
diff --git a/disk/part.c b/disk/part.c
index 58a4563..d73625c 100644
--- a/disk/part.c
+++ b/disk/part.c
@@ -35,16 +35,6 @@
#define PRINTF(fmt,args...)
#endif
-/* Rather than repeat this expression each time, add a define for it */
-#if (defined(CONFIG_CMD_IDE) || \
- defined(CONFIG_CMD_SATA) || \
- defined(CONFIG_CMD_SCSI) || \
- defined(CONFIG_CMD_USB) || \
- defined(CONFIG_MMC) || \
- defined(CONFIG_SYSTEMACE) )
-#define HAVE_BLOCK_DEVICE
-#endif
-
struct block_drvr {
char *name;
block_dev_desc_t* (*get_dev)(int dev);
diff --git a/disk/part_amiga.c b/disk/part_amiga.c
index dc7d462..0e6d82d 100644
--- a/disk/part_amiga.c
+++ b/disk/part_amiga.c
@@ -26,11 +26,7 @@
#include <ide.h>
#include "part_amiga.h"
-#if defined(CONFIG_CMD_IDE) || \
- defined(CONFIG_CMD_SCSI) || \
- defined(CONFIG_CMD_USB) || \
- defined(CONFIG_MMC) || \
- defined(CONFIG_SYSTEMACE)
+#ifdef HAVE_BLOCK_DEVICE
#undef AMIGA_DEBUG
diff --git a/disk/part_dos.c b/disk/part_dos.c
index 3fe901b..37087a6 100644
--- a/disk/part_dos.c
+++ b/disk/part_dos.c
@@ -35,12 +35,7 @@
#include <ide.h>
#include "part_dos.h"
-#if defined(CONFIG_CMD_IDE) || \
- defined(CONFIG_CMD_SATA) || \
- defined(CONFIG_CMD_SCSI) || \
- defined(CONFIG_CMD_USB) || \
- defined(CONFIG_MMC) || \
- defined(CONFIG_SYSTEMACE)
+#ifdef HAVE_BLOCK_DEVICE
/* Convert char[4] in little endian format to the host format integer
*/
diff --git a/disk/part_efi.c b/disk/part_efi.c
index 7665017..b3fd0e9 100644
--- a/disk/part_efi.c
+++ b/disk/part_efi.c
@@ -39,13 +39,7 @@
DECLARE_GLOBAL_DATA_PTR;
-#if defined(CONFIG_CMD_IDE) || \
- defined(CONFIG_CMD_SATA) || \
- defined(CONFIG_CMD_SCSI) || \
- defined(CONFIG_CMD_USB) || \
- defined(CONFIG_MMC) || \
- defined(CONFIG_SYSTEMACE)
-
+#ifdef HAVE_BLOCK_DEVICE
/**
* efi_crc32() - EFI version of crc32 function
* @buf: buffer to calculate crc32 of
diff --git a/disk/part_iso.c b/disk/part_iso.c
index 4401790..49639af 100644
--- a/disk/part_iso.c
+++ b/disk/part_iso.c
@@ -25,12 +25,7 @@
#include <command.h>
#include "part_iso.h"
-#if defined(CONFIG_CMD_IDE) || \
- defined(CONFIG_CMD_SCSI) || \
- defined(CONFIG_CMD_SATA) || \
- defined(CONFIG_CMD_USB) || \
- defined(CONFIG_MMC) || \
- defined(CONFIG_SYSTEMACE)
+#ifdef HAVE_BLOCK_DEVICE
/* #define ISO_PART_DEBUG */
diff --git a/disk/part_mac.c b/disk/part_mac.c
index cb443ac..74dc12f 100644
--- a/disk/part_mac.c
+++ b/disk/part_mac.c
@@ -34,12 +34,7 @@
#include <ide.h>
#include "part_mac.h"
-#if defined(CONFIG_CMD_IDE) || \
- defined(CONFIG_CMD_SCSI) || \
- defined(CONFIG_CMD_SATA) || \
- defined(CONFIG_CMD_USB) || \
- defined(CONFIG_MMC) || \
- defined(CONFIG_SYSTEMACE)
+#ifdef HAVE_BLOCK_DEVICE
/* stdlib.h causes some compatibility problems; should fixe these! -- wd */
#ifndef __ldiv_t_defined
diff --git a/doc/README.commands b/doc/README.commands
index 923418b..9eb3671 100644
--- a/doc/README.commands
+++ b/doc/README.commands
@@ -15,24 +15,22 @@ help: Long description. This is a string
**** Behind the scene ******
-The structure created is named with a special prefix (__u_boot_list_cmd_)
-and placed by the linker in a special section.
+The structure created is named with a special prefix and placed by
+the linker in a special section using the linker lists mechanism
+(see include/linker_lists.h)
This makes it possible for the final link to extract all commands
compiled into any object code and construct a static array so the
-command can be found in an array starting at _u_boot_list_cmd__start.
+command array can be iterated over using the linker lists macros.
-To ensure that the linker does not discard these symbols when linking
-full U-Boot we generate a list of all the commands we have built (based
-on the sections mentioned above) and use that to force the linker to
-first enter the symbol as undefined in the output object so that there
-is then a need for the symbol to be kept (this is the UNDEF_SYM logic in
-the Makefile).
+The linker lists feature ensures that the linker does not discard
+these symbols when linking full U-Boot even though they are not
+referenced in the source code as such.
If a new board is defined do not forget to define the command section
by writing in u-boot.lds ($(TOPDIR)/board/boardname/u-boot.lds) these
3 lines:
.u_boot_list : {
- #include "u-boot.lst";
+ KEEP(*(SORT(.u_boot_list*)));
}
diff --git a/doc/README.displaying-bmps b/doc/README.displaying-bmps
new file mode 100644
index 0000000..3311541
--- /dev/null
+++ b/doc/README.displaying-bmps
@@ -0,0 +1,27 @@
+If you are experiencing hangups/data-aborts when trying to display a BMP image,
+the following might be relevant to your situation...
+
+Some architectures cannot handle unaligned memory accesses, and an attempt to
+perform one will lead to a data abort. On such architectures it is necessary to
+make sure all data is properly aligned, and in many situations simply choosing
+a 32 bit aligned address is enough to ensure proper alignment. This is not
+always the case when dealing with data that has an internal layout such as a
+BMP image:
+
+BMP images have a header that starts with 2 byte-size fields followed by mostly
+32 bit fields. The packed struct that represents this header can be seen below:
+
+typedef struct bmp_header {
+ /* Header */
+ char signature[2];
+ __u32 file_size;
+ __u32 reserved;
+ __u32 data_offset;
+ ... etc
+} __attribute__ ((packed)) bmp_header_t;
+
+When placed in an aligned address such as 0x80a00000, char signature offsets
+the __u32 fields into unaligned addresses (in our example 0x80a00002,
+0x80a00006, and so on...). When these fields are accessed by U-Boot, a 32 bit
+access is generated at a non-32-bit-aligned address, causing a data abort.
+The proper alignment for BMP images is therefore: 32-bit-aligned-address + 2.
diff --git a/doc/README.ns9750dev b/doc/README.ns9750dev
deleted file mode 100644
index 2991440..0000000
--- a/doc/README.ns9750dev
+++ /dev/null
@@ -1,36 +0,0 @@
-U-Boot Port to the NS9750 DevKit from NetSilicon
-
-1 Overview
-2 Board Configuration
-3 Installation
-
-
-1 Overview
-----------
-
-This port supports these NS9750 features.
-
-o one UART
-
-2 Board Configuration
----------------------
-
-Switches:
-SW10: 4
-SW11: 6,7
-SW16: 6,7,8
-SW17-SW20: 1
-SW4: 3, 6
-SW 1: 1
-SW2: 4
-SW3: 3
-SW8: 3 (rotated by 180 degree!!!!)
-
-Serial Console is Port B (bottom right port)
-
-3 Installation
---------------
-
-Have fun,
---
-Markus Pietrek <mpietrek@fsforth.de>
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 7d73ea0..189b883 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -9,85 +9,86 @@ maintain a list of such former fellows, so archeologists can check
easily if here is something they might want to dig for...
-Board Arch CPU removed Commit last known maintainer/contact
-=============================================================================
-AMX860 powerpc mpc860 - - Wolfgang Denk <wd@denx.de>
-c2mon powerpc mpc855 - - Wolfgang Denk <wd@denx.de>
-ETX094 powerpc mpc850 - - Wolfgang Denk <wd@denx.de>
-IAD210 powerpc mpc860 - - -
-LANTEC powerpc mpc850 - - Wolfgang Denk <wd@denx.de>
-SCM powerpc mpc8260 - - Wolfgang Grandegger <wg@denx.de>
-SX1 arm arm925t - -
-TQM85xx powerpc MPC85xx d923a5d5 2012-10-04 Stefan Roese <sr@denx.de>
-apollon arm omap24xx 535c74f 2012-09-18 Kyungmin Park <kyungmin.park@samsung.com>
-tb0229 mips mips32 3f3110d 2011-12-12
-rmu powerpc MPC850 fb82fd7 2011-12-07 Wolfgang Denk <wd@denx.de>
-OXC powerpc MPC8240 309a292 2011-12-07
-BAB7xx powerpc MPC740/MPC750 c53043b 2011-12-07 Frank Gottschling <fgottschling@eltec.de>
-xm250 arm pxa c746cdd 2011-25-11
-pleb2 arm pxa b185a1c 2011-25-11
-cradle arm pxa 4e24f8a 2011-25-11 Kyle Harris <kharris@nexus-tech.net>
-cerf250 arm pxa a3f1241 2011-25-11 Prakash Kumar <prakash@embedx.com>
-mpq101 powerpc mpc85xx e877fab 2011-10-23 Alex Dubov <oakad@yahoo.com>
-ixdpg425 arm ixp 0ca8eb7 2011-09-22 Stefan Roese <sr@denx.de>
-ixdp425 arm ixp 0ca8eb7 2011-09-22 Kyle Harris <kharris@nexus-tech.net>
-zylonite arm pxa b66521a 2011-09-05
-shannon arm sa1100 5df092d 2011-09-05 Rolf Offermanns <rof@sysgo.de>
-modnet50 arm arm720t 9c62815 2011-09-05 Thomas Elste <info@elste.org>
-lpc2292sodimm arm arm720t d1a067a 2011-09-05
-lart arm sa1100 3d57573 2011-09-05 Alex Züpke <azu@sysgo.de>
-impa7 arm arm720t c1f8750 2011-09-05 Marius Gröger <mag@sysgo.de>
-gcplus arm sa1100 2c650e2 2011-09-05 George G. Davis <gdavis@mvista.com>
-evb4510 arm arm720t 26e670e 2011-09-05 Curt Brune <curt@cucy.com>
-ep7312 arm arm720t c8f63b4 2011-09-05 Marius Gröger <mag@sysgo.de>
-dnp1110 arm sa1100 fc5e5ce 2011-09-05 Alex Züpke <azu@sysgo.de>
-SMN42 arm arm720t 6aac646 2011-09-05
-at91rm9200dk arm arm920t 1c85752 2011-07-17
-m501sk arm arm920t b1a2bd4 2011-07-17
-kb9202 arm arm920t 5bd3814 2011-07-17
-csb637 arm arm920t d14af08 2011-07-17
-cmc_pu2 arm arm920t 37a9b4d 2011-07-17
-at91cap9adk arm arm926ejs b550834 2011-07-17 Stelian Pop <stelian@popies.net>
-voiceblue arm arm925t 1b793a4 2011-07-17
-smdk2400 arm arm920t ad218a8 2011-07-17 Gary Jennejohn <garyj@denx.de>
-sbc2410x arm arm920t 1f7f0ed 2011-07-17
-netstar arm arm925t 6ea2405 2011-07-17
-mx1fs2 arm arm920t 6962419 2011-07-17
-lpd7a404 arm lh7a40x 957731e 2011-07-17
-edb9301 arm arm920t 716f7ad 2011-07-17
-edb9302 arm arm920t 716f7ad 2011-07-17
-edb9302a arm arm920t 716f7ad 2011-07-17
-edb9307 arm arm920t 716f7ad 2011-07-17
-edb9307a arm arm920t 716f7ad 2011-07-17
-edb9312 arm arm920t 716f7ad 2011-07-17
-edb9315 arm arm920t 716f7ad 2011-07-17
-edb9315a arm arm920t 716f7ad 2011-07-17
-B2 arm s3c44b0 5dcf536 2011-07-16 Andrea Scian <andrea.scian@dave-tech.it>
-armadillo arm arm720t be28857 2011-07-16 Rowel Atienza <rowel@diwalabs.com>
-assabet arm sa1100 c91e90d 2011-07-16 George G. Davis <gdavis@mvista.com>
-trab arm S3C2400 566e5cf 2011-05-01 Gary Jennejohn <garyj@denx.de>
-xsengine ARM PXA2xx 4262a7c 2010-10-20
-wepep250 ARM PXA2xx 7369478 2010-10-20 Peter Figuli <peposh@etc.sk>
-delta ARM PXA2xx 75e2035 2010-10-20
-mp2usb ARM AT91RM2900 ee986e2 2011-01-25 Eric Bénard <eric@eukrea.com>
-barco powerpc MPC8245 afaa27b 2010-11-23 Marc Leeman <marc.leeman@barco.com>
-ERIC powerpc 405GP d9ba451 2010-11-21 Swen Anderson <sand@peppercon.de>
-VoVPN-GW_100MHz powerpc MPC8260 26fe3d2 2010-10-24 Juergen Selent <j.selent@elmeg.de>
-NC650 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de>
-CP850 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de>
-logodl ARM PXA2xx 059e778 2010-10-18 August Hoeraendl <august.hoerandl@gmx.at>
-CCM powerpc MPC860 dff07e1 2010-10-06 Wolfgang Grandegger <wg@denx.de>
-PCU_E powerpc MPC860T 544d97e 2010-10-06 Wolfgang Denk <wd@denx.de>
-spieval powerpc MPC5200 69434e4 2010-09-19
-smmaco4 powerpc MPC5200 9ddc3af 2010-09-19
-HMI10 powerpc MPC823 77efe35 2010-09-19 Wolfgang Denk <wd@denx.de>
-GTH powerpc MPC860 0fe247b 2010-07-17 Thomas Lange <thomas@corelatus.se>
-AmigaOneG3SE 953b7e6 2010-06-23
-suzaku microblaze 4f18060 2009-10-03 Yasushi Shoji <yashi@atmark-techno.com>
-XUPV2P microblaze 8fab49e 2008-12-10 Michal Simek <monstr@monstr.eu>
-MVS1 powerpc MPC823 306620b 2008-08-26 Andre Schwarz <andre.schwarz@matrix-vision.de>
-adsvix ARM PXA27x 7610db1 2008-07-30 Adrian Filipi <adrian.filipi@eurotech.com>
-R5200 ColdFire 48ead7a 2008-03-31 Zachary P. Landau <zachary.landau@labxtechnologies.com>
-CPCI440 powerpc 440GP b568fd2 2007-12-27 Matthias Fuchs <matthias.fuchs@esd-electronics.com>
-PCIPPC2 powerpc MPC740/MPC750 - - Wolfgang Denk <wd@denx.de>
+Board Arch CPU Commit Removed Last known maintainer/contact
+=================================================================================================
+ns9750dev arm arm926ejs - - Markus Pietrek <mpietrek@fsforth.de>
+AMX860 powerpc mpc860 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de>
+c2mon powerpc mpc855 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de>
+ETX094 powerpc mpc850 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de>
+IAD210 powerpc mpc860 1b0757e 2012-10-28 -
+LANTEC powerpc mpc850 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de>
+SCM powerpc mpc8260 1b0757e 2012-10-28 Wolfgang Grandegger <wg@denx.de>
+SX1 arm arm925t 53c4154 2012-10-26
+TQM85xx powerpc MPC85xx d923a5d 2012-10-04 Stefan Roese <sr@denx.de>
+apollon arm omap24xx 535c74f 2012-09-18 Kyungmin Park <kyungmin.park@samsung.com>
+tb0229 mips mips32 3f3110d 2011-12-12
+rmu powerpc MPC850 fb82fd7 2011-12-07 Wolfgang Denk <wd@denx.de>
+OXC powerpc MPC8240 309a292 2011-12-07
+BAB7xx powerpc MPC740/MPC750 c53043b 2011-12-07 Frank Gottschling <fgottschling@eltec.de>
+xm250 arm pxa c746cdd 2011-25-11
+pleb2 arm pxa b185a1c 2011-25-11
+cradle arm pxa 4e24f8a 2011-25-11 Kyle Harris <kharris@nexus-tech.net>
+cerf250 arm pxa a3f1241 2011-25-11 Prakash Kumar <prakash@embedx.com>
+mpq101 powerpc mpc85xx e877fab 2011-10-23 Alex Dubov <oakad@yahoo.com>
+ixdpg425 arm ixp 0ca8eb7 2011-09-22 Stefan Roese <sr@denx.de>
+ixdp425 arm ixp 0ca8eb7 2011-09-22 Kyle Harris <kharris@nexus-tech.net>
+zylonite arm pxa b66521a 2011-09-05
+shannon arm sa1100 5df092d 2011-09-05 Rolf Offermanns <rof@sysgo.de>
+modnet50 arm arm720t 9c62815 2011-09-05 Thomas Elste <info@elste.org>
+lpc2292sodimm arm arm720t d1a067a 2011-09-05
+lart arm sa1100 3d57573 2011-09-05 Alex Züpke <azu@sysgo.de>
+impa7 arm arm720t c1f8750 2011-09-05 Marius Gröger <mag@sysgo.de>
+gcplus arm sa1100 2c650e2 2011-09-05 George G. Davis <gdavis@mvista.com>
+evb4510 arm arm720t 26e670e 2011-09-05 Curt Brune <curt@cucy.com>
+ep7312 arm arm720t c8f63b4 2011-09-05 Marius Gröger <mag@sysgo.de>
+dnp1110 arm sa1100 fc5e5ce 2011-09-05 Alex Züpke <azu@sysgo.de>
+SMN42 arm arm720t 6aac646 2011-09-05
+at91rm9200dk arm arm920t 1c85752 2011-07-17
+m501sk arm arm920t b1a2bd4 2011-07-17
+kb9202 arm arm920t 5bd3814 2011-07-17
+csb637 arm arm920t d14af08 2011-07-17
+cmc_pu2 arm arm920t 37a9b4d 2011-07-17
+at91cap9adk arm arm926ejs b550834 2011-07-17 Stelian Pop <stelian@popies.net>
+voiceblue arm arm925t 1b793a4 2011-07-17
+smdk2400 arm arm920t ad218a8 2011-07-17 Gary Jennejohn <garyj@denx.de>
+sbc2410x arm arm920t 1f7f0ed 2011-07-17
+netstar arm arm925t 6ea2405 2011-07-17
+mx1fs2 arm arm920t 6962419 2011-07-17
+lpd7a404 arm lh7a40x 957731e 2011-07-17
+edb9301 arm arm920t 716f7ad 2011-07-17
+edb9302 arm arm920t 716f7ad 2011-07-17
+edb9302a arm arm920t 716f7ad 2011-07-17
+edb9307 arm arm920t 716f7ad 2011-07-17
+edb9307a arm arm920t 716f7ad 2011-07-17
+edb9312 arm arm920t 716f7ad 2011-07-17
+edb9315 arm arm920t 716f7ad 2011-07-17
+edb9315a arm arm920t 716f7ad 2011-07-17
+B2 arm s3c44b0 5dcf536 2011-07-16 Andrea Scian <andrea.scian@dave-tech.it>
+armadillo arm arm720t be28857 2011-07-16 Rowel Atienza <rowel@diwalabs.com>
+assabet arm sa1100 c91e90d 2011-07-16 George G. Davis <gdavis@mvista.com>
+trab arm S3C2400 566e5cf 2011-05-01 Gary Jennejohn <garyj@denx.de>
+xsengine ARM PXA2xx 4262a7c 2010-10-20
+wepep250 ARM PXA2xx 7369478 2010-10-20 Peter Figuli <peposh@etc.sk>
+delta ARM PXA2xx 75e2035 2010-10-20
+mp2usb ARM AT91RM2900 ee986e2 2011-01-25 Eric Bénard <eric@eukrea.com>
+barco powerpc MPC8245 afaa27b 2010-11-23 Marc Leeman <marc.leeman@barco.com>
+ERIC powerpc 405GP d9ba451 2010-11-21 Swen Anderson <sand@peppercon.de>
+VoVPN-GW_100MHz powerpc MPC8260 26fe3d2 2010-10-24 Juergen Selent <j.selent@elmeg.de>
+NC650 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de>
+CP850 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de>
+logodl ARM PXA2xx 059e778 2010-10-18 August Hoeraendl <august.hoerandl@gmx.at>
+CCM powerpc MPC860 dff07e1 2010-10-06 Wolfgang Grandegger <wg@denx.de>
+PCU_E powerpc MPC860T 544d97e 2010-10-06 Wolfgang Denk <wd@denx.de>
+spieval powerpc MPC5200 69434e4 2010-09-19
+smmaco4 powerpc MPC5200 9ddc3af 2010-09-19
+HMI10 powerpc MPC823 77efe35 2010-09-19 Wolfgang Denk <wd@denx.de>
+GTH powerpc MPC860 0fe247b 2010-07-17 Thomas Lange <thomas@corelatus.se>
+AmigaOneG3SE powerpc 74xx_7xx 953b7e6 2010-06-23
+suzaku microblaze - 4f18060 2009-10-03 Yasushi Shoji <yashi@atmark-techno.com>
+XUPV2P microblaze - 8fab49e 2008-12-10 Michal Simek <monstr@monstr.eu>
+MVS1 powerpc MPC823 306620b 2008-08-26 Andre Schwarz <andre.schwarz@matrix-vision.de>
+adsvix ARM PXA27x 7610db1 2008-07-30 Adrian Filipi <adrian.filipi@eurotech.com>
+R5200 ColdFire - 48ead7a 2008-03-31 Zachary P. Landau <zachary.landau@labxtechnologies.com>
+CPCI440 powerpc 440GP b568fd2 2007-12-27 Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+PCIPPC2 powerpc MPC740/MPC750 7c9e89b 2013-02-07 Wolfgang Denk <wd@denx.de>
PCIPPC6 powerpc MPC740/MPC750 - - Wolfgang Denk <wd@denx.de>
diff --git a/doc/SPL/README.am335x-network b/doc/SPL/README.am335x-network
new file mode 100644
index 0000000..e5a198f
--- /dev/null
+++ b/doc/SPL/README.am335x-network
@@ -0,0 +1,92 @@
+USING AM335x NETBOOT FEATURE
+
+ Some boards (like TI AM335x based ones) have quite big on-chip RAM and
+have support for booting via network in ROM. The following describes
+how to setup network booting and then optionally use this support to flash
+NAND and bricked (empty) board with only a network cable.
+
+ I. Building the required images
+ 1. You have to enable generic SPL configuration options (see
+docs/README.SPL) as well as CONFIG_SPL_NET_SUPPORT,
+CONFIG_ETH_SUPPORT, CONFIG_SPL_LIBGENERIC_SUPPORT and
+CONFIG_SPL_LIBCOMMON_SUPPORT in your board configuration file to build
+SPL with support for booting over the network. Also you have to enable
+the driver for the NIC used and CONFIG_SPL_BOARD_INIT option if your
+board needs some board-specific initialization (TI AM335x EVM does).
+If you want SPL to use some Vendor Class Identifier (VCI) you can set
+one with CONFIG_SPL_NET_VCI_STRING option. am335x_evm configuration
+comes with support for network booting preconfigured.
+ 2. Define CONFIG_BOOTCOMMAND for your board to load and run debrick
+script after boot:
+#define CONFIG_BOOTCOMMAND \
+ "setenv autoload no; " \
+ "bootp; " \
+ "if tftp 80000000 debrick.scr; then " \
+ "source 80000000; " \
+ "fi"
+(Or create additional board configuration with such option).
+ 3. Build U-Boot as usual
+ $ make <your_board_name>
+ You will need u-boot.img and spl/u-boot.bin images to perform
+network boot. Copy them to u-boot-restore.img and
+u-boot-spl-restore.bin respectively to distinguish this version
+(with automatic restore running) from the main one.
+
+ II. Host configuration.
+ 1. Setup DHCP server (recommended server is ISC DHCPd).
+ - Install DHCP server and setup it to listen on the interface you
+chose to connect to the board (usually configured in
+/etc/default/dhcpd or /etc/default/isc-dhcp-server). Make sure there
+are no other active DHCP servers in the same network segment.
+ - Edit your dhcpd.conf and subnet declaration matching the address
+on the interface. Specify the range of assigned addresses and bootfile
+to use. IMPORTANT! Both RBL and SPL use the image filename provided
+in the BOOTP reply but obviously they need different images (RBL needs
+raw SPL image -- u-boot-spl-restore.bin while SPL needs main U-Boot
+image -- u-boot-restore.img). So you have to configure DHCP server to
+provide different image filenames to RBL and SPL (and possibly another
+one to main U-Boot). This can be done by checking Vendor Class
+Identifier (VCI) set by BOOTP client (RBL sets VCI to "DM814x ROM v1.0"
+and you can set VCI used by SPL with CONFIG_SPL_NET_VCI_STRING option,
+see above).
+ - If you plan to use TFTP server on another machine you have to set
+server-name option to point to it.
+ - Here is sample configuration for ISC DHCPd, assuming the interface
+used to connect to the board is eth0, and it has address 192.168.8.1:
+
+subnet 192.168.8.0 netmask 255.255.255.0 {
+ range dynamic-bootp 192.168.8.100 192.168.8.199;
+
+ if substring (option vendor-class-identifier, 0, 10) = "DM814x ROM" {
+ filename "u-boot-spl-restore.bin";
+ } elsif substring (option vendor-class-identifier, 0, 17) = "AM335x U-Boot SPL" {
+ filename "u-boot-restore.img";
+ } else {
+ filename "uImage";
+ }
+}
+
+ 2. Setup TFTP server.
+ Install TFTP server and put image files to it's root directory
+(likely /tftpboot or /var/lib/tftpboot or /srv/tftp). You will need
+u-boot.img and spl/u-boot-spl-bin files from U-Boot build directory.
+
+ III. Reflashing (debricking) the board.
+ 1. Write debrick script. You will need to write a script that will
+be executed after network boot to perform actual rescue actions. You
+can use usual U-Boot commands from this script: tftp to load additional
+files, nand erase/nand write to erase/write the NAND flash.
+
+ 2. Create script image from your script. From U-Boot build directory:
+
+$ ./tools/mkimage -A arm -O U-Boot -C none -T script -d <your script> debrick.scr
+
+This will create debrick.scr file with your script inside.
+
+ 3. Copy debrick.scr to TFTP root directory. You also need to copy
+there all the files your script tries to load via TFTP. Example script
+loads u-boot.img and MLO. You have to create these files doing regular
+(not restore_flash) build and copy them to tftpboot directory.
+
+ 4. Boot the board from the network, U-Boot will load debrick script
+and run it after boot.
diff --git a/doc/driver-model/UDM-serial.txt b/doc/driver-model/UDM-serial.txt
index c6a8ab0..ef71fea 100644
--- a/doc/driver-model/UDM-serial.txt
+++ b/doc/driver-model/UDM-serial.txt
@@ -86,7 +86,7 @@ III) Analysis of in-tree drivers
7) ns9750_serial.c
------------------
- No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
+ Unmaintained port. Code got removed.
8) opencores_yanu.c
-------------------
diff --git a/drivers/gpio/da8xx_gpio.c b/drivers/gpio/da8xx_gpio.c
index ed6a118..76648d2 100644
--- a/drivers/gpio/da8xx_gpio.c
+++ b/drivers/gpio/da8xx_gpio.c
@@ -34,6 +34,138 @@ static struct gpio_registry {
#if defined(CONFIG_SOC_DA8XX)
#define pinmux(x) (&davinci_syscfg_regs->pinmux[x])
+#if defined(CONFIG_SOC_DA8XX) && !defined(CONFIG_SOC_DA850)
+static const struct pinmux_config gpio_pinmux[] = {
+ { pinmux(13), 8, 6 }, /* GP0[0] */
+ { pinmux(13), 8, 7 },
+ { pinmux(14), 8, 0 },
+ { pinmux(14), 8, 1 },
+ { pinmux(14), 8, 2 },
+ { pinmux(14), 8, 3 },
+ { pinmux(14), 8, 4 },
+ { pinmux(14), 8, 5 },
+ { pinmux(14), 8, 6 },
+ { pinmux(14), 8, 7 },
+ { pinmux(15), 8, 0 },
+ { pinmux(15), 8, 1 },
+ { pinmux(15), 8, 2 },
+ { pinmux(15), 8, 3 },
+ { pinmux(15), 8, 4 },
+ { pinmux(15), 8, 5 },
+ { pinmux(15), 8, 6 }, /* GP1[0] */
+ { pinmux(15), 8, 7 },
+ { pinmux(16), 8, 0 },
+ { pinmux(16), 8, 1 },
+ { pinmux(16), 8, 2 },
+ { pinmux(16), 8, 3 },
+ { pinmux(16), 8, 4 },
+ { pinmux(16), 8, 5 },
+ { pinmux(16), 8, 6 },
+ { pinmux(16), 8, 7 },
+ { pinmux(17), 8, 0 },
+ { pinmux(17), 8, 1 },
+ { pinmux(17), 8, 2 },
+ { pinmux(17), 8, 3 },
+ { pinmux(17), 8, 4 },
+ { pinmux(17), 8, 5 },
+ { pinmux(17), 8, 6 }, /* GP2[0] */
+ { pinmux(17), 8, 7 },
+ { pinmux(18), 8, 0 },
+ { pinmux(18), 8, 1 },
+ { pinmux(18), 8, 2 },
+ { pinmux(18), 8, 3 },
+ { pinmux(18), 8, 4 },
+ { pinmux(18), 8, 5 },
+ { pinmux(18), 8, 6 },
+ { pinmux(18), 8, 7 },
+ { pinmux(19), 8, 0 },
+ { pinmux(9), 8, 2 },
+ { pinmux(9), 8, 3 },
+ { pinmux(9), 8, 4 },
+ { pinmux(9), 8, 5 },
+ { pinmux(9), 8, 6 },
+ { pinmux(10), 8, 1 }, /* GP3[0] */
+ { pinmux(10), 8, 2 },
+ { pinmux(10), 8, 3 },
+ { pinmux(10), 8, 4 },
+ { pinmux(10), 8, 5 },
+ { pinmux(10), 8, 6 },
+ { pinmux(10), 8, 7 },
+ { pinmux(11), 8, 0 },
+ { pinmux(11), 8, 1 },
+ { pinmux(11), 8, 2 },
+ { pinmux(11), 8, 3 },
+ { pinmux(11), 8, 4 },
+ { pinmux(9), 8, 7 },
+ { pinmux(2), 8, 6 },
+ { pinmux(11), 8, 5 },
+ { pinmux(11), 8, 6 },
+ { pinmux(12), 8, 4 }, /* GP4[0] */
+ { pinmux(12), 8, 5 },
+ { pinmux(12), 8, 6 },
+ { pinmux(12), 8, 7 },
+ { pinmux(13), 8, 0 },
+ { pinmux(13), 8, 1 },
+ { pinmux(13), 8, 2 },
+ { pinmux(13), 8, 3 },
+ { pinmux(13), 8, 4 },
+ { pinmux(13), 8, 5 },
+ { pinmux(11), 8, 7 },
+ { pinmux(12), 8, 0 },
+ { pinmux(12), 8, 1 },
+ { pinmux(12), 8, 2 },
+ { pinmux(12), 8, 3 },
+ { pinmux(9), 8, 1 },
+ { pinmux(7), 8, 3 }, /* GP5[0] */
+ { pinmux(7), 8, 4 },
+ { pinmux(7), 8, 5 },
+ { pinmux(7), 8, 6 },
+ { pinmux(7), 8, 7 },
+ { pinmux(8), 8, 0 },
+ { pinmux(8), 8, 1 },
+ { pinmux(8), 8, 2 },
+ { pinmux(8), 8, 3 },
+ { pinmux(8), 8, 4 },
+ { pinmux(8), 8, 5 },
+ { pinmux(8), 8, 6 },
+ { pinmux(8), 8, 7 },
+ { pinmux(9), 8, 0 },
+ { pinmux(7), 8, 1 },
+ { pinmux(7), 8, 2 },
+ { pinmux(5), 8, 1 }, /* GP6[0] */
+ { pinmux(5), 8, 2 },
+ { pinmux(5), 8, 3 },
+ { pinmux(5), 8, 4 },
+ { pinmux(5), 8, 5 },
+ { pinmux(5), 8, 6 },
+ { pinmux(5), 8, 7 },
+ { pinmux(6), 8, 0 },
+ { pinmux(6), 8, 1 },
+ { pinmux(6), 8, 2 },
+ { pinmux(6), 8, 3 },
+ { pinmux(6), 8, 4 },
+ { pinmux(6), 8, 5 },
+ { pinmux(6), 8, 6 },
+ { pinmux(6), 8, 7 },
+ { pinmux(7), 8, 0 },
+ { pinmux(1), 8, 0 }, /* GP7[0] */
+ { pinmux(1), 8, 1 },
+ { pinmux(1), 8, 2 },
+ { pinmux(1), 8, 3 },
+ { pinmux(1), 8, 4 },
+ { pinmux(1), 8, 5 },
+ { pinmux(1), 8, 6 },
+ { pinmux(1), 8, 7 },
+ { pinmux(2), 8, 0 },
+ { pinmux(2), 8, 1 },
+ { pinmux(2), 8, 2 },
+ { pinmux(2), 8, 3 },
+ { pinmux(2), 8, 4 },
+ { pinmux(2), 8, 5 },
+ { pinmux(0), 1, 0 },
+ { pinmux(0), 1, 1 },
+};
+#else /* CONFIG_SOC_DA8XX && CONFIG_SOC_DA850 */
static const struct pinmux_config gpio_pinmux[] = {
{ pinmux(1), 8, 7 }, /* GP0[0] */
{ pinmux(1), 8, 6 },
@@ -180,9 +312,10 @@ static const struct pinmux_config gpio_pinmux[] = {
{ pinmux(18), 8, 3 },
{ pinmux(18), 8, 2 },
};
-#else
+#endif /* CONFIG_SOC_DA8XX && !CONFIG_SOC_DA850 */
+#else /* !CONFIG_SOC_DA8XX */
#define davinci_configure_pin_mux(a, b)
-#endif
+#endif /* CONFIG_SOC_DA8XX */
int gpio_request(unsigned gpio, const char *label)
{
diff --git a/drivers/i2c/tegra_i2c.c b/drivers/i2c/tegra_i2c.c
index efc77fa..ca71cd3 100644
--- a/drivers/i2c/tegra_i2c.c
+++ b/drivers/i2c/tegra_i2c.c
@@ -46,6 +46,7 @@ struct i2c_bus {
struct i2c_control *control;
struct i2c_ctlr *regs;
int is_dvc; /* DVC type, rather than I2C */
+ int is_scs; /* single clock source (T114+) */
int inited; /* bus is inited */
};
@@ -88,7 +89,28 @@ static void i2c_init_controller(struct i2c_bus *i2c_bus)
* 16 to get the right frequency.
*/
clock_start_periph_pll(i2c_bus->periph_id, CLOCK_ID_PERIPH,
- i2c_bus->speed * 2 * 8);
+ i2c_bus->speed * 2 * 8);
+
+ if (i2c_bus->is_scs) {
+ /*
+ * T114 I2C went to a single clock source for standard/fast and
+ * HS clock speeds. The new clock rate setting calculation is:
+ * SCL = CLK_SOURCE.I2C /
+ * (CLK_MULT_STD_FAST_MODE * (I2C_CLK_DIV_STD_FAST_MODE+1) *
+ * I2C FREQUENCY DIVISOR) as per the T114 TRM (sec 30.3.1).
+ *
+ * NOTE: We do this here, after the initial clock/pll start,
+ * because if we read the clk_div reg before the controller
+ * is running, we hang, and we need it for the new calc.
+ */
+ int clk_div_stdfst_mode = readl(&i2c_bus->regs->clk_div) >> 16;
+ debug("%s: CLK_DIV_STD_FAST_MODE setting = %d\n", __func__,
+ clk_div_stdfst_mode);
+
+ clock_start_periph_pll(i2c_bus->periph_id, CLOCK_ID_PERIPH,
+ CLK_MULT_STD_FAST_MODE * (clk_div_stdfst_mode + 1) *
+ i2c_bus->speed * 2);
+ }
/* Reset I2C controller. */
i2c_reset_controller(i2c_bus);
@@ -352,10 +374,11 @@ static int i2c_get_config(const void *blob, int node, struct i2c_bus *i2c_bus)
* @param node_list list of nodes to process (any <=0 are ignored)
* @param count number of nodes to process
* @param is_dvc 1 if these are DVC ports, 0 if standard I2C
+ * @param is_scs 1 if this HW uses a single clock source (T114+)
* @return 0 if ok, -1 on error
*/
static int process_nodes(const void *blob, int node_list[], int count,
- int is_dvc)
+ int is_dvc, int is_scs)
{
struct i2c_bus *i2c_bus;
int i;
@@ -375,6 +398,8 @@ static int process_nodes(const void *blob, int node_list[], int count,
return -1;
}
+ i2c_bus->is_scs = is_scs;
+
i2c_bus->is_dvc = is_dvc;
if (is_dvc) {
i2c_bus->control =
@@ -403,18 +428,25 @@ void i2c_init_board(void)
const void *blob = gd->fdt_blob;
int count;
- /* First get the normal i2c ports */
+ /* First check for newer (T114+) I2C ports */
+ count = fdtdec_find_aliases_for_id(blob, "i2c",
+ COMPAT_NVIDIA_TEGRA114_I2C, node_list,
+ TEGRA_I2C_NUM_CONTROLLERS);
+ if (process_nodes(blob, node_list, count, 0, 1))
+ return;
+
+ /* Now get the older (T20/T30) normal I2C ports */
count = fdtdec_find_aliases_for_id(blob, "i2c",
COMPAT_NVIDIA_TEGRA20_I2C, node_list,
TEGRA_I2C_NUM_CONTROLLERS);
- if (process_nodes(blob, node_list, count, 0))
+ if (process_nodes(blob, node_list, count, 0, 0))
return;
/* Now look for dvc ports */
count = fdtdec_add_aliases_for_id(blob, "i2c",
COMPAT_NVIDIA_TEGRA20_DVC, node_list,
TEGRA_I2C_NUM_CONTROLLERS);
- if (process_nodes(blob, node_list, count, 1))
+ if (process_nodes(blob, node_list, count, 1, 0))
return;
}
diff --git a/drivers/mmc/arm_pl180_mmci.c b/drivers/mmc/arm_pl180_mmci.c
index af1380a..ab2e81e 100644
--- a/drivers/mmc/arm_pl180_mmci.c
+++ b/drivers/mmc/arm_pl180_mmci.c
@@ -377,6 +377,7 @@ int arm_pl180_mmci_init(struct pl180_mmc_host *host)
dev->set_ios = host_set_ios;
dev->init = mmc_host_reset;
dev->getcd = NULL;
+ dev->getwp = NULL;
dev->host_caps = host->caps;
dev->voltages = host->voltages;
dev->f_min = host->clock_min;
diff --git a/drivers/mmc/bfin_sdh.c b/drivers/mmc/bfin_sdh.c
index 0f98b96..2631174 100644
--- a/drivers/mmc/bfin_sdh.c
+++ b/drivers/mmc/bfin_sdh.c
@@ -287,6 +287,7 @@ int bfin_mmc_init(bd_t *bis)
mmc->set_ios = bfin_sdh_set_ios;
mmc->init = bfin_sdh_init;
mmc->getcd = NULL;
+ mmc->getwp = NULL;
mmc->host_caps = MMC_MODE_4BIT;
mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
diff --git a/drivers/mmc/davinci_mmc.c b/drivers/mmc/davinci_mmc.c
index ee8f261..e2379e3 100644
--- a/drivers/mmc/davinci_mmc.c
+++ b/drivers/mmc/davinci_mmc.c
@@ -388,6 +388,7 @@ int davinci_mmc_init(bd_t *bis, struct davinci_mmc *host)
mmc->set_ios = dmmc_set_ios;
mmc->init = dmmc_init;
mmc->getcd = NULL;
+ mmc->getwp = NULL;
mmc->f_min = 200000;
mmc->f_max = 25000000;
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index b90f3e7..54b5363 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -552,6 +552,7 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
mmc->set_ios = esdhc_set_ios;
mmc->init = esdhc_init;
mmc->getcd = esdhc_getcd;
+ mmc->getwp = NULL;
voltage_caps = 0;
caps = regs->hostcapblt;
diff --git a/drivers/mmc/ftsdc010_esdhc.c b/drivers/mmc/ftsdc010_esdhc.c
index f1702fe..42f0e0c 100644
--- a/drivers/mmc/ftsdc010_esdhc.c
+++ b/drivers/mmc/ftsdc010_esdhc.c
@@ -666,6 +666,7 @@ int ftsdc010_mmc_init(int dev_index)
mmc->set_ios = ftsdc010_set_ios;
mmc->init = ftsdc010_core_init;
mmc->getcd = NULL;
+ mmc->getwp = NULL;
mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
diff --git a/drivers/mmc/gen_atmel_mci.c b/drivers/mmc/gen_atmel_mci.c
index 67b2dbe..70a9f91 100644
--- a/drivers/mmc/gen_atmel_mci.c
+++ b/drivers/mmc/gen_atmel_mci.c
@@ -349,6 +349,7 @@ int atmel_mci_init(void *regs)
mmc->set_ios = mci_set_ios;
mmc->init = mci_init;
mmc->getcd = NULL;
+ mmc->getwp = NULL;
/* need to be able to pass these in on a board by board basis */
mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 72e8ce6..7b5fdd9 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -40,6 +40,23 @@
static struct list_head mmc_devices;
static int cur_dev_num = -1;
+int __weak board_mmc_getwp(struct mmc *mmc)
+{
+ return -1;
+}
+
+int mmc_getwp(struct mmc *mmc)
+{
+ int wp;
+
+ wp = board_mmc_getwp(mmc);
+
+ if ((wp < 0) && mmc->getwp)
+ wp = mmc->getwp(mmc);
+
+ return wp;
+}
+
int __board_mmc_getcd(struct mmc *mmc) {
return -1;
}
diff --git a/drivers/mmc/mmc_spi.c b/drivers/mmc/mmc_spi.c
index 11ba532..fe6a5a1 100644
--- a/drivers/mmc/mmc_spi.c
+++ b/drivers/mmc/mmc_spi.c
@@ -273,6 +273,7 @@ struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode)
mmc->set_ios = mmc_spi_set_ios;
mmc->init = mmc_spi_init_p;
mmc->getcd = NULL;
+ mmc->getwp = NULL;
mmc->host_caps = MMC_MODE_SPI;
mmc->voltages = MMC_SPI_VOLTAGE;
diff --git a/drivers/mmc/mxcmmc.c b/drivers/mmc/mxcmmc.c
index d58c18b..4f99617 100644
--- a/drivers/mmc/mxcmmc.c
+++ b/drivers/mmc/mxcmmc.c
@@ -499,6 +499,7 @@ static int mxcmci_initialize(bd_t *bis)
mmc->set_ios = mxcmci_set_ios;
mmc->init = mxcmci_init;
mmc->getcd = NULL;
+ mmc->getwp = NULL;
mmc->host_caps = MMC_MODE_4BIT;
host->base = (struct mxcmci_regs *)CONFIG_MXC_MCI_REGS_BASE;
diff --git a/drivers/mmc/mxsmmc.c b/drivers/mmc/mxsmmc.c
index a72f66c..a89660f 100644
--- a/drivers/mmc/mxsmmc.c
+++ b/drivers/mmc/mxsmmc.c
@@ -53,12 +53,6 @@ struct mxsmmc_priv {
struct mxs_dma_desc *desc;
};
-#if defined(CONFIG_MX23)
-static const unsigned int mxsmmc_id_offset = 1;
-#elif defined(CONFIG_MX28)
-static const unsigned int mxsmmc_id_offset = 0;
-#endif
-
#define MXSMMC_MAX_TIMEOUT 10000
#define MXSMMC_SMALL_TRANSFER 512
@@ -137,7 +131,7 @@ static int mxsmmc_send_cmd_dma(struct mxsmmc_priv *priv, struct mmc_data *data)
priv->desc->cmd.data |= MXS_DMA_DESC_IRQ | MXS_DMA_DESC_DEC_SEM |
(data_count << MXS_DMA_DESC_BYTES_OFFSET);
- dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + priv->id + mxsmmc_id_offset;
+ dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + priv->id;
mxs_dma_desc_append(dmach, priv->desc);
if (mxs_dma_go(dmach)) {
bounce_buffer_stop(&bbstate);
@@ -390,15 +384,9 @@ int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int), int (*cd)(int))
struct mmc *mmc = NULL;
struct mxsmmc_priv *priv = NULL;
int ret;
-#if defined(CONFIG_MX23)
- const unsigned int mxsmmc_max_id = 2;
- const unsigned int mxsmmc_clk_id = 0;
-#elif defined(CONFIG_MX28)
- const unsigned int mxsmmc_max_id = 4;
- const unsigned int mxsmmc_clk_id = id;
-#endif
+ const unsigned int mxsmmc_clk_id = mxs_ssp_clock_by_bus(id);
- if (id >= mxsmmc_max_id)
+ if (!mxs_ssp_bus_id_valid(id))
return -ENODEV;
mmc = malloc(sizeof(struct mmc));
@@ -418,7 +406,7 @@ int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int), int (*cd)(int))
return -ENOMEM;
}
- ret = mxs_dma_init_channel(id + mxsmmc_id_offset);
+ ret = mxs_dma_init_channel(MXS_DMA_CHANNEL_AHB_APBH_SSP0 + id);
if (ret)
return ret;
@@ -432,6 +420,7 @@ int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int), int (*cd)(int))
mmc->set_ios = mxsmmc_set_ios;
mmc->init = mxsmmc_init;
mmc->getcd = NULL;
+ mmc->getwp = NULL;
mmc->priv = priv;
mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c
index afd9b30..67cfcc2 100644
--- a/drivers/mmc/omap_hsmmc.c
+++ b/drivers/mmc/omap_hsmmc.c
@@ -30,6 +30,7 @@
#include <twl4030.h>
#include <twl6030.h>
#include <twl6035.h>
+#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/sys_proto.h>
@@ -38,30 +39,71 @@
#define SYSCTL_SRC (1 << 25)
#define SYSCTL_SRD (1 << 26)
+struct omap_hsmmc_data {
+ struct hsmmc *base_addr;
+ int cd_gpio;
+ int wp_gpio;
+};
+
/* If we fail after 1 second wait, something is really bad */
#define MAX_RETRY_MS 1000
static int mmc_read_data(struct hsmmc *mmc_base, char *buf, unsigned int size);
static int mmc_write_data(struct hsmmc *mmc_base, const char *buf,
unsigned int siz);
-static struct mmc hsmmc_dev[2];
+static struct mmc hsmmc_dev[3];
+static struct omap_hsmmc_data hsmmc_dev_data[3];
+
+#if (defined(CONFIG_OMAP_GPIO) && !defined(CONFIG_SPL_BUILD)) || \
+ (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_GPIO_SUPPORT))
+static int omap_mmc_setup_gpio_in(int gpio, const char *label)
+{
+ if (!gpio_is_valid(gpio))
+ return -1;
+
+ if (gpio_request(gpio, label) < 0)
+ return -1;
+
+ if (gpio_direction_input(gpio) < 0)
+ return -1;
+
+ return gpio;
+}
+
+static int omap_mmc_getcd(struct mmc *mmc)
+{
+ int cd_gpio = ((struct omap_hsmmc_data *)mmc->priv)->cd_gpio;
+ return gpio_get_value(cd_gpio);
+}
+
+static int omap_mmc_getwp(struct mmc *mmc)
+{
+ int wp_gpio = ((struct omap_hsmmc_data *)mmc->priv)->wp_gpio;
+ return gpio_get_value(wp_gpio);
+}
+#else
+static inline int omap_mmc_setup_gpio_in(int gpio, const char *label)
+{
+ return -1;
+}
+
+#define omap_mmc_getcd NULL
+#define omap_mmc_getwp NULL
+#endif
#if defined(CONFIG_OMAP44XX) && defined(CONFIG_TWL6030_POWER)
static void omap4_vmmc_pbias_config(struct mmc *mmc)
{
u32 value = 0;
- struct omap_sys_ctrl_regs *const ctrl =
- (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
-
- value = readl(&ctrl->control_pbiaslite);
+ value = readl((*ctrl)->control_pbiaslite);
value &= ~(MMC1_PBIASLITE_PWRDNZ | MMC1_PWRDNZ);
- writel(value, &ctrl->control_pbiaslite);
+ writel(value, (*ctrl)->control_pbiaslite);
/* set VMMC to 3V */
twl6030_power_mmc_init();
- value = readl(&ctrl->control_pbiaslite);
+ value = readl((*ctrl)->control_pbiaslite);
value |= MMC1_PBIASLITE_VMODE | MMC1_PBIASLITE_PWRDNZ | MMC1_PWRDNZ;
- writel(value, &ctrl->control_pbiaslite);
+ writel(value, (*ctrl)->control_pbiaslite);
}
#endif
@@ -69,26 +111,24 @@ static void omap4_vmmc_pbias_config(struct mmc *mmc)
static void omap5_pbias_config(struct mmc *mmc)
{
u32 value = 0;
- struct omap_sys_ctrl_regs *const ctrl =
- (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
- value = readl(&ctrl->control_pbias);
+ value = readl((*ctrl)->control_pbias);
value &= ~(SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ);
value |= SDCARD_BIAS_HIZ_MODE;
- writel(value, &ctrl->control_pbias);
+ writel(value, (*ctrl)->control_pbias);
twl6035_mmc1_poweron_ldo();
- value = readl(&ctrl->control_pbias);
+ value = readl((*ctrl)->control_pbias);
value &= ~SDCARD_BIAS_HIZ_MODE;
value |= SDCARD_PBIASLITE_VMODE | SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ;
- writel(value, &ctrl->control_pbias);
+ writel(value, (*ctrl)->control_pbias);
- value = readl(&ctrl->control_pbias);
+ value = readl((*ctrl)->control_pbias);
if (value & (1 << 23)) {
value &= ~(SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ);
value |= SDCARD_BIAS_HIZ_MODE;
- writel(value, &ctrl->control_pbias);
+ writel(value, (*ctrl)->control_pbias);
}
}
#endif
@@ -177,11 +217,12 @@ void mmc_init_stream(struct hsmmc *mmc_base)
static int mmc_init_setup(struct mmc *mmc)
{
- struct hsmmc *mmc_base = (struct hsmmc *)mmc->priv;
+ struct hsmmc *mmc_base;
unsigned int reg_val;
unsigned int dsor;
ulong start;
+ mmc_base = ((struct omap_hsmmc_data *)mmc->priv)->base_addr;
mmc_board_init(mmc);
writel(readl(&mmc_base->sysconfig) | MMC_SOFTRESET,
@@ -262,10 +303,11 @@ static void mmc_reset_controller_fsm(struct hsmmc *mmc_base, u32 bit)
static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
struct mmc_data *data)
{
- struct hsmmc *mmc_base = (struct hsmmc *)mmc->priv;
+ struct hsmmc *mmc_base;
unsigned int flags, mmc_stat;
ulong start;
+ mmc_base = ((struct omap_hsmmc_data *)mmc->priv)->base_addr;
start = get_timer(0);
while ((readl(&mmc_base->pstate) & (DATI_MASK | CMDI_MASK)) != 0) {
if (get_timer(0) - start > MAX_RETRY_MS) {
@@ -489,10 +531,11 @@ static int mmc_write_data(struct hsmmc *mmc_base, const char *buf,
static void mmc_set_ios(struct mmc *mmc)
{
- struct hsmmc *mmc_base = (struct hsmmc *)mmc->priv;
+ struct hsmmc *mmc_base;
unsigned int dsor = 0;
ulong start;
+ mmc_base = ((struct omap_hsmmc_data *)mmc->priv)->base_addr;
/* configue bus width */
switch (mmc->bus_width) {
case 8:
@@ -540,36 +583,40 @@ static void mmc_set_ios(struct mmc *mmc)
writel(readl(&mmc_base->sysctl) | CEN_ENABLE, &mmc_base->sysctl);
}
-int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max)
+int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio,
+ int wp_gpio)
{
- struct mmc *mmc;
-
- mmc = &hsmmc_dev[dev_index];
+ struct mmc *mmc = &hsmmc_dev[dev_index];
+ struct omap_hsmmc_data *priv_data = &hsmmc_dev_data[dev_index];
sprintf(mmc->name, "OMAP SD/MMC");
mmc->send_cmd = mmc_send_cmd;
mmc->set_ios = mmc_set_ios;
mmc->init = mmc_init_setup;
- mmc->getcd = NULL;
+ mmc->getcd = omap_mmc_getcd;
+ mmc->getwp = omap_mmc_getwp;
+ mmc->priv = priv_data;
switch (dev_index) {
case 0:
- mmc->priv = (struct hsmmc *)OMAP_HSMMC1_BASE;
+ priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC1_BASE;
break;
#ifdef OMAP_HSMMC2_BASE
case 1:
- mmc->priv = (struct hsmmc *)OMAP_HSMMC2_BASE;
+ priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC2_BASE;
break;
#endif
#ifdef OMAP_HSMMC3_BASE
case 2:
- mmc->priv = (struct hsmmc *)OMAP_HSMMC3_BASE;
+ priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC3_BASE;
break;
#endif
default:
- mmc->priv = (struct hsmmc *)OMAP_HSMMC1_BASE;
+ priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC1_BASE;
return 1;
}
+ priv_data->cd_gpio = omap_mmc_setup_gpio_in(cd_gpio, "mmc_cd");
+ priv_data->wp_gpio = omap_mmc_setup_gpio_in(wp_gpio, "mmc_wp");
mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
mmc->host_caps = (MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS |
MMC_MODE_HC) & ~host_caps_mask;
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index b9cbe34..daca0ea 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -438,6 +438,7 @@ int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk)
mmc->set_ios = sdhci_set_ios;
mmc->init = sdhci_init;
mmc->getcd = NULL;
+ mmc->getwp = NULL;
caps = sdhci_readl(host, SDHCI_CAPABILITIES);
#ifdef CONFIG_MMC_SDMA
diff --git a/drivers/mmc/sh_mmcif.c b/drivers/mmc/sh_mmcif.c
index 4588568..011d4f3 100644
--- a/drivers/mmc/sh_mmcif.c
+++ b/drivers/mmc/sh_mmcif.c
@@ -599,6 +599,7 @@ int mmcif_mmc_init(void)
mmc->set_ios = sh_mmcif_set_ios;
mmc->init = sh_mmcif_init;
mmc->getcd = NULL;
+ mmc->getwp = NULL;
host->regs = (struct sh_mmcif_regs *)CONFIG_SH_MMCIF_ADDR;
host->clk = CONFIG_SH_MMCIF_CLK;
mmc->priv = host;
diff --git a/drivers/mmc/tegra_mmc.c b/drivers/mmc/tegra_mmc.c
index d749ab0..e86bc68 100644
--- a/drivers/mmc/tegra_mmc.c
+++ b/drivers/mmc/tegra_mmc.c
@@ -2,7 +2,7 @@
* (C) Copyright 2009 SAMSUNG Electronics
* Minkyu Kang <mk7.kang@samsung.com>
* Jaehoon Chung <jh80.chung@samsung.com>
- * Portions Copyright 2011-2012 NVIDIA Corporation
+ * Portions Copyright 2011-2013 NVIDIA Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -28,43 +28,45 @@
#include <asm/arch-tegra/tegra_mmc.h>
#include <mmc.h>
-/* support 4 mmc hosts */
-struct mmc mmc_dev[4];
-struct mmc_host mmc_host[4];
+DECLARE_GLOBAL_DATA_PTR;
+struct mmc mmc_dev[MAX_HOSTS];
+struct mmc_host mmc_host[MAX_HOSTS];
-/**
- * Get the host address and peripheral ID for a device. Devices are numbered
- * from 0 to 3.
- *
- * @param host Structure to fill in (base, reg, mmc_id)
- * @param dev_index Device index (0-3)
- */
-static void tegra_get_setup(struct mmc_host *host, int dev_index)
+#ifndef CONFIG_OF_CONTROL
+#error "Please enable device tree support to use this driver"
+#endif
+
+static void mmc_set_power(struct mmc_host *host, unsigned short power)
{
- debug("tegra_get_setup: dev_index = %d\n", dev_index);
-
- switch (dev_index) {
- case 1:
- host->base = TEGRA_SDMMC3_BASE;
- host->mmc_id = PERIPH_ID_SDMMC3;
- break;
- case 2:
- host->base = TEGRA_SDMMC2_BASE;
- host->mmc_id = PERIPH_ID_SDMMC2;
- break;
- case 3:
- host->base = TEGRA_SDMMC1_BASE;
- host->mmc_id = PERIPH_ID_SDMMC1;
- break;
- case 0:
- default:
- host->base = TEGRA_SDMMC4_BASE;
- host->mmc_id = PERIPH_ID_SDMMC4;
- break;
+ u8 pwr = 0;
+ debug("%s: power = %x\n", __func__, power);
+
+ if (power != (unsigned short)-1) {
+ switch (1 << power) {
+ case MMC_VDD_165_195:
+ pwr = TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V1_8;
+ break;
+ case MMC_VDD_29_30:
+ case MMC_VDD_30_31:
+ pwr = TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V3_0;
+ break;
+ case MMC_VDD_32_33:
+ case MMC_VDD_33_34:
+ pwr = TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V3_3;
+ break;
+ }
}
+ debug("%s: pwr = %X\n", __func__, pwr);
- host->reg = (struct tegra_mmc *)host->base;
+ /* Set the bus voltage first (if any) */
+ writeb(pwr, &host->reg->pwrcon);
+ if (pwr == 0)
+ return;
+
+ /* Now enable bus power */
+ pwr |= TEGRA_MMC_PWRCTL_SD_BUS_POWER;
+ writeb(pwr, &host->reg->pwrcon);
}
static void mmc_prepare_data(struct mmc_host *host, struct mmc_data *data,
@@ -363,8 +365,7 @@ static void mmc_change_clock(struct mmc_host *host, uint clock)
debug(" mmc_change_clock called\n");
/*
- * Change Tegra SDMMCx clock divisor here. Source is 216MHz,
- * PLLP_OUT0
+ * Change Tegra SDMMCx clock divisor here. Source is PLLP_OUT0
*/
if (clock == 0)
goto out;
@@ -439,7 +440,7 @@ static void mmc_set_ios(struct mmc *mmc)
debug("mmc_set_ios: hostctl = %08X\n", ctrl);
}
-static void mmc_reset(struct mmc_host *host)
+static void mmc_reset(struct mmc_host *host, struct mmc *mmc)
{
unsigned int timeout;
debug(" mmc_reset called\n");
@@ -465,6 +466,14 @@ static void mmc_reset(struct mmc_host *host)
timeout--;
udelay(1000);
}
+
+ /* Set SD bus voltage & enable bus power */
+ mmc_set_power(host, fls(mmc->voltages) - 1);
+ debug("%s: power control = %02X, host control = %02X\n", __func__,
+ readb(&host->reg->pwrcon), readb(&host->reg->hostctl));
+
+ /* Make sure SDIO pads are set up */
+ pad_init_mmc(host);
}
static int mmc_core_init(struct mmc *mmc)
@@ -473,7 +482,7 @@ static int mmc_core_init(struct mmc *mmc)
unsigned int mask;
debug(" mmc_core_init called\n");
- mmc_reset(host);
+ mmc_reset(host, mmc);
host->version = readw(&host->reg->hcver);
debug("host version = %x\n", host->version);
@@ -518,41 +527,43 @@ int tegra_mmc_getcd(struct mmc *mmc)
debug("tegra_mmc_getcd called\n");
- if (host->cd_gpio >= 0)
- return !gpio_get_value(host->cd_gpio);
+ if (fdt_gpio_isvalid(&host->cd_gpio))
+ return fdtdec_get_gpio(&host->cd_gpio);
return 1;
}
-int tegra_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio)
+static int do_mmc_init(int dev_index)
{
struct mmc_host *host;
char gpusage[12]; /* "SD/MMCn PWR" or "SD/MMCn CD" */
struct mmc *mmc;
- debug(" tegra_mmc_init: index %d, bus width %d "
- "pwr_gpio %d cd_gpio %d\n",
- dev_index, bus_width, pwr_gpio, cd_gpio);
-
+ /* DT should have been read & host config filled in */
host = &mmc_host[dev_index];
+ if (!host->enabled)
+ return -1;
- host->clock = 0;
- host->pwr_gpio = pwr_gpio;
- host->cd_gpio = cd_gpio;
- tegra_get_setup(host, dev_index);
+ debug(" do_mmc_init: index %d, bus width %d "
+ "pwr_gpio %d cd_gpio %d\n",
+ dev_index, host->width,
+ host->pwr_gpio.gpio, host->cd_gpio.gpio);
+ host->clock = 0;
clock_start_periph_pll(host->mmc_id, CLOCK_ID_PERIPH, 20000000);
- if (host->pwr_gpio >= 0) {
+ if (fdt_gpio_isvalid(&host->pwr_gpio)) {
sprintf(gpusage, "SD/MMC%d PWR", dev_index);
- gpio_request(host->pwr_gpio, gpusage);
- gpio_direction_output(host->pwr_gpio, 1);
+ gpio_request(host->pwr_gpio.gpio, gpusage);
+ gpio_direction_output(host->pwr_gpio.gpio, 1);
+ debug(" Power GPIO name = %s\n", host->pwr_gpio.name);
}
- if (host->cd_gpio >= 0) {
+ if (fdt_gpio_isvalid(&host->cd_gpio)) {
sprintf(gpusage, "SD/MMC%d CD", dev_index);
- gpio_request(host->cd_gpio, gpusage);
- gpio_direction_input(host->cd_gpio);
+ gpio_request(host->cd_gpio.gpio, gpusage);
+ gpio_direction_input(host->cd_gpio.gpio);
+ debug(" CD GPIO name = %s\n", host->cd_gpio.name);
}
mmc = &mmc_dev[dev_index];
@@ -563,12 +574,13 @@ int tegra_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio)
mmc->set_ios = mmc_set_ios;
mmc->init = mmc_core_init;
mmc->getcd = tegra_mmc_getcd;
+ mmc->getwp = NULL;
mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
mmc->host_caps = 0;
- if (bus_width == 8)
+ if (host->width == 8)
mmc->host_caps |= MMC_MODE_8BIT;
- if (bus_width >= 4)
+ if (host->width >= 4)
mmc->host_caps |= MMC_MODE_4BIT;
mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_HC;
@@ -577,8 +589,6 @@ int tegra_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio)
* low-speed SDIO card frequency (actually 400KHz)
* max freq is highest HS eMMC clock as per the SD/MMC spec
* (actually 52MHz)
- * Both of these are the closest equivalents w/216MHz source
- * clock and Tegra SDMMC divisors.
*/
mmc->f_min = 375000;
mmc->f_max = 48000000;
@@ -587,3 +597,104 @@ int tegra_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio)
return 0;
}
+
+/**
+ * Get the host address and peripheral ID for a node.
+ *
+ * @param blob fdt blob
+ * @param node Device index (0-3)
+ * @param host Structure to fill in (reg, width, mmc_id)
+ */
+static int mmc_get_config(const void *blob, int node, struct mmc_host *host)
+{
+ debug("%s: node = %d\n", __func__, node);
+
+ host->enabled = fdtdec_get_is_enabled(blob, node);
+
+ host->reg = (struct tegra_mmc *)fdtdec_get_addr(blob, node, "reg");
+ if ((fdt_addr_t)host->reg == FDT_ADDR_T_NONE) {
+ debug("%s: no sdmmc base reg info found\n", __func__);
+ return -FDT_ERR_NOTFOUND;
+ }
+
+ host->mmc_id = clock_decode_periph_id(blob, node);
+ if (host->mmc_id == PERIPH_ID_NONE) {
+ debug("%s: could not decode periph id\n", __func__);
+ return -FDT_ERR_NOTFOUND;
+ }
+
+ /*
+ * NOTE: mmc->bus_width is determined by mmc.c dynamically.
+ * TBD: Override it with this value?
+ */
+ host->width = fdtdec_get_int(blob, node, "bus-width", 0);
+ if (!host->width)
+ debug("%s: no sdmmc width found\n", __func__);
+
+ /* These GPIOs are optional */
+ fdtdec_decode_gpio(blob, node, "cd-gpios", &host->cd_gpio);
+ fdtdec_decode_gpio(blob, node, "wp-gpios", &host->wp_gpio);
+ fdtdec_decode_gpio(blob, node, "power-gpios", &host->pwr_gpio);
+
+ debug("%s: found controller at %p, width = %d, periph_id = %d\n",
+ __func__, host->reg, host->width, host->mmc_id);
+ return 0;
+}
+
+/*
+ * Process a list of nodes, adding them to our list of SDMMC ports.
+ *
+ * @param blob fdt blob
+ * @param node_list list of nodes to process (any <=0 are ignored)
+ * @param count number of nodes to process
+ * @return 0 if ok, -1 on error
+ */
+static int process_nodes(const void *blob, int node_list[], int count)
+{
+ struct mmc_host *host;
+ int i, node;
+
+ debug("%s: count = %d\n", __func__, count);
+
+ /* build mmc_host[] for each controller */
+ for (i = 0; i < count; i++) {
+ node = node_list[i];
+ if (node <= 0)
+ continue;
+
+ host = &mmc_host[i];
+ host->id = i;
+
+ if (mmc_get_config(blob, node, host)) {
+ printf("%s: failed to decode dev %d\n", __func__, i);
+ return -1;
+ }
+ do_mmc_init(i);
+ }
+ return 0;
+}
+
+void tegra_mmc_init(void)
+{
+ int node_list[MAX_HOSTS], count;
+ const void *blob = gd->fdt_blob;
+ debug("%s entry\n", __func__);
+
+ /* See if any Tegra30 MMC controllers are present */
+ count = fdtdec_find_aliases_for_id(blob, "sdhci",
+ COMPAT_NVIDIA_TEGRA30_SDMMC, node_list, MAX_HOSTS);
+ debug("%s: count of T30 sdhci nodes is %d\n", __func__, count);
+ if (process_nodes(blob, node_list, count)) {
+ printf("%s: Error processing T30 mmc node(s)!\n", __func__);
+ return;
+ }
+
+ /* Now look for any Tegra20 MMC controllers */
+ count = fdtdec_find_aliases_for_id(blob, "sdhci",
+ COMPAT_NVIDIA_TEGRA20_SDMMC, node_list, MAX_HOSTS);
+ debug("%s: count of T20 sdhci nodes is %d\n", __func__, count);
+ if (process_nodes(blob, node_list, count)) {
+ printf("%s: Error processing T20 mmc node(s)!\n", __func__);
+ return;
+ }
+}
diff --git a/drivers/mtd/onenand/onenand_spl.c b/drivers/mtd/onenand/onenand_spl.c
index 50eaa71..4bec2c2 100644
--- a/drivers/mtd/onenand/onenand_spl.c
+++ b/drivers/mtd/onenand/onenand_spl.c
@@ -112,7 +112,7 @@ static int onenand_spl_read_page(uint32_t block, uint32_t page, uint32_t *buf,
void onenand_spl_load_image(uint32_t offs, uint32_t size, void *dst)
{
uint32_t *addr = (uint32_t *)dst;
- uint32_t total_pages;
+ uint32_t to_page;
uint32_t block;
uint32_t page, rpage;
enum onenand_spl_pagesize pagesize;
@@ -125,22 +125,20 @@ void onenand_spl_load_image(uint32_t offs, uint32_t size, void *dst)
* pulling further unwanted functions into the SPL.
*/
if (pagesize == 2048) {
- total_pages = DIV_ROUND_UP(size, 2048);
page = offs / 2048;
+ to_page = page + DIV_ROUND_UP(size, 2048);
} else {
- total_pages = DIV_ROUND_UP(size, 4096);
page = offs / 4096;
+ to_page = page + DIV_ROUND_UP(size, 4096);
}
- for (; page <= total_pages; page++) {
+ for (; page <= to_page; page++) {
block = page / ONENAND_PAGES_PER_BLOCK;
rpage = page & (ONENAND_PAGES_PER_BLOCK - 1);
ret = onenand_spl_read_page(block, rpage, addr, pagesize);
- if (ret) {
- total_pages += ONENAND_PAGES_PER_BLOCK;
+ if (ret)
page += ONENAND_PAGES_PER_BLOCK - 1;
- } else {
+ else
addr += pagesize / 4;
- }
}
}
diff --git a/drivers/net/cpsw.c b/drivers/net/cpsw.c
index db04795..93f8417 100644
--- a/drivers/net/cpsw.c
+++ b/drivers/net/cpsw.c
@@ -227,6 +227,9 @@ struct cpsw_priv {
struct cpsw_slave *slaves;
struct phy_device *phydev;
struct mii_dev *bus;
+
+ u32 mdio_link;
+ u32 phy_mask;
};
static inline int cpsw_ale_get_field(u32 *ale_entry, u32 start, u32 bits)
@@ -598,10 +601,21 @@ static int cpsw_update_link(struct cpsw_priv *priv)
for_each_slave(slave, priv)
cpsw_slave_update_link(slave, priv, &link);
-
+ priv->mdio_link = readl(&mdio_regs->link);
return link;
}
+static int cpsw_check_link(struct cpsw_priv *priv)
+{
+ u32 link = 0;
+
+ link = __raw_readl(&mdio_regs->link) & priv->phy_mask;
+ if ((link) && (link == priv->mdio_link))
+ return 1;
+
+ return cpsw_update_link(priv);
+}
+
static inline u32 cpsw_get_slave_port(struct cpsw_priv *priv, u32 slave_num)
{
if (priv->host_port == 0)
@@ -631,6 +645,8 @@ static void cpsw_slave_init(struct cpsw_slave *slave, struct cpsw_priv *priv)
cpsw_ale_port_state(priv, slave_port, ALE_PORT_STATE_FORWARD);
cpsw_ale_add_mcast(priv, NetBcastAddr, 1 << slave_port);
+
+ priv->phy_mask |= 1 << slave->data->phy_id;
}
static struct cpdma_desc *cpdma_desc_alloc(struct cpsw_priv *priv)
@@ -862,7 +878,7 @@ static int cpsw_send(struct eth_device *dev, void *packet, int length)
int len;
int timeout = CPDMA_TIMEOUT;
- if (!cpsw_update_link(priv))
+ if (!cpsw_check_link(priv))
return -EIO;
flush_dcache_range((unsigned long)packet,
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 5e8b648..de3f471 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -33,7 +33,6 @@ COBJS-$(CONFIG_ARM_DCC) += arm_dcc.o
COBJS-$(CONFIG_ATMEL_USART) += atmel_usart.o
COBJS-$(CONFIG_LPC32XX_HSUART) += lpc32xx_hsuart.o
COBJS-$(CONFIG_MCFUART) += mcfuart.o
-COBJS-$(CONFIG_NS9750_UART) += ns9750_serial.o
COBJS-$(CONFIG_OPENCORES_YANU) += opencores_yanu.o
COBJS-$(CONFIG_SYS_NS16550) += ns16550.o
COBJS-$(CONFIG_S3C64XX) += s3c64xx.o
diff --git a/drivers/serial/ns9750_serial.c b/drivers/serial/ns9750_serial.c
deleted file mode 100644
index 85fc68a..0000000
--- a/drivers/serial/ns9750_serial.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/***********************************************************************
- *
- * Copyright (C) 2004 by FS Forth-Systeme GmbH.
- * All rights reserved.
- *
- * $Id: ns9750_serial.c,v 1.1 2004/02/16 10:37:20 mpietrek Exp $
- * @Author: Markus Pietrek
- * @Descr: Serial driver for the NS9750. Only one UART is supported yet.
- * @References: [1] NS9750 Hardware Reference/December 2003
- * @TODO: Implement Character GAP Timer when chip is fixed for PLL bypass
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- ***********************************************************************/
-
-#include <common.h>
-
-#include "ns9750_bbus.h" /* for GPIOs */
-#include "ns9750_ser.h" /* for serial configuration */
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if !defined(CONFIG_CONS_INDEX)
-#error "No console index specified."
-#endif
-
-#define CONSOLE CONFIG_CONS_INDEX
-
-static unsigned int calcBitrateRegister( void );
-static unsigned int calcRxCharGapRegister( void );
-
-static char cCharsAvailable; /* Numbers of chars in unCharCache */
-static unsigned int unCharCache; /* unCharCache is only valid if
- * cCharsAvailable > 0 */
-
-/***********************************************************************
- * @Function: serial_init
- * @Return: 0
- * @Descr: configures GPIOs and UART. Requires BBUS Master Reset turned off
- ***********************************************************************/
-
-static int ns9750_serial_init(void)
-{
- unsigned int aunGPIOTxD[] = { 0, 8, 40, 44 };
- unsigned int aunGPIORxD[] = { 1, 9, 41, 45 };
-
- cCharsAvailable = 0;
-
- /* configure TxD and RxD pins for their special function */
- set_gpio_cfg_reg_val( aunGPIOTxD[ CONSOLE ],
- NS9750_GPIO_CFG_FUNC_0 | NS9750_GPIO_CFG_OUTPUT );
- set_gpio_cfg_reg_val( aunGPIORxD[ CONSOLE ],
- NS9750_GPIO_CFG_FUNC_0 | NS9750_GPIO_CFG_INPUT );
-
- /* configure serial engine */
- *get_ser_reg_addr_channel( NS9750_SER_CTRL_A, CONSOLE ) =
- NS9750_SER_CTRL_A_CE |
- NS9750_SER_CTRL_A_STOP |
- NS9750_SER_CTRL_A_WLS_8;
-
- serial_setbrg();
-
- *get_ser_reg_addr_channel( NS9750_SER_CTRL_B, CONSOLE ) =
- NS9750_SER_CTRL_B_RCGT;
-
- return 0;
-}
-
-/***********************************************************************
- * @Function: serial_putc
- * @Return: n/a
- * @Descr: writes one character to the FIFO. Blocks until FIFO is not full
- ***********************************************************************/
-
-static void ns9750_serial_putc(const char c)
-{
- if (c == '\n')
- serial_putc( '\r' );
-
- while (!(*get_ser_reg_addr_channel( NS9750_SER_STAT_A, CONSOLE) &
- NS9750_SER_STAT_A_TRDY ) ) {
- /* do nothing, wait for characters in FIFO sent */
- }
-
- *(volatile char*) get_ser_reg_addr_channel( NS9750_SER_FIFO,
- CONSOLE) = c;
-}
-
-/***********************************************************************
- * @Function: serial_getc
- * @Return: the character read
- * @Descr: performs only 8bit accesses to the FIFO. No error handling
- ***********************************************************************/
-
-static int ns9750_serial_getc(void)
-{
- int i;
-
- while (!serial_tstc() ) {
- /* do nothing, wait for incoming characters */
- }
-
- /* at least one character in unCharCache */
- i = (int) (unCharCache & 0xff);
-
- unCharCache >>= 8;
- cCharsAvailable--;
-
- return i;
-}
-
-/***********************************************************************
- * @Function: serial_tstc
- * @Return: 0 if no input available, otherwise != 0
- * @Descr: checks for incoming FIFO not empty. Stores the incoming chars in
- * unCharCache and the numbers of characters in cCharsAvailable
- ***********************************************************************/
-
-static int ns9750_serial_tstc(void)
-{
- unsigned int unRegCache;
-
- if ( cCharsAvailable )
- return 1;
-
- unRegCache = *get_ser_reg_addr_channel( NS9750_SER_STAT_A,CONSOLE );
- if( unRegCache & NS9750_SER_STAT_A_RBC ) {
- *get_ser_reg_addr_channel( NS9750_SER_STAT_A, CONSOLE ) =
- NS9750_SER_STAT_A_RBC;
- unRegCache = *get_ser_reg_addr_channel( NS9750_SER_STAT_A,
- CONSOLE );
- }
-
- if ( unRegCache & NS9750_SER_STAT_A_RRDY ) {
- cCharsAvailable = (unRegCache & NS9750_SER_STAT_A_RXFDB_MA)>>20;
- if ( !cCharsAvailable )
- cCharsAvailable = 4;
-
- unCharCache = *get_ser_reg_addr_channel( NS9750_SER_FIFO,
- CONSOLE );
- return 1;
- }
-
- /* no chars available */
- return 0;
-}
-
-static void ns9750_serial_setbrg(void)
-{
- *get_ser_reg_addr_channel( NS9750_SER_BITRATE, CONSOLE ) =
- calcBitrateRegister();
- *get_ser_reg_addr_channel( NS9750_SER_RX_CHAR_TIMER, CONSOLE ) =
- calcRxCharGapRegister();
-}
-
-/***********************************************************************
- * @Function: calcBitrateRegister
- * @Return: value for the serial bitrate register
- * @Descr: register value depends on clock frequency and baudrate
- ***********************************************************************/
-
-static unsigned int calcBitrateRegister( void )
-{
- return ( NS9750_SER_BITRATE_EBIT |
- NS9750_SER_BITRATE_CLKMUX_BCLK |
- NS9750_SER_BITRATE_TMODE |
- NS9750_SER_BITRATE_TCDR_16 |
- NS9750_SER_BITRATE_RCDR_16 |
- ( ( ( ( CONFIG_SYS_CLK_FREQ / 8 ) / /* BBUS clock,[1] Fig. 38 */
- ( gd->baudrate * 16 ) ) - 1 ) &
- NS9750_SER_BITRATE_N_MA ) );
-}
-
-/***********************************************************************
- * @Function: calcRxCharGapRegister
- * @Return: value for the character gap timer register
- * @Descr: register value depends on clock frequency and baudrate. Currently 0
- * is used as there is a bug with the gap timer in PLL bypass mode.
- ***********************************************************************/
-
-static unsigned int calcRxCharGapRegister( void )
-{
- return NS9750_SER_RX_CHAR_TIMER_TRUN;
-}
-
-static struct serial_device ns9750_serial_drv = {
- .name = "ns9750_serial",
- .start = ns9750_serial_init,
- .stop = NULL,
- .setbrg = ns9750_serial_setbrg,
- .putc = ns9750_serial_putc,
- .puts = default_serial_puts,
- .getc = ns9750_serial_getc,
- .tstc = ns9750_serial_tstc,
-};
-
-void ns9750_serial_initialize(void)
-{
- serial_register(&ns9750_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
- return &ns9750_serial_drv;
-}
diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c
index 1f8955a..7922bf0 100644
--- a/drivers/serial/serial.c
+++ b/drivers/serial/serial.c
@@ -164,7 +164,6 @@ serial_initfunc(altera_serial_initialize);
serial_initfunc(atmel_serial_initialize);
serial_initfunc(lpc32xx_serial_initialize);
serial_initfunc(mcf_serial_initialize);
-serial_initfunc(ns9750_serial_initialize);
serial_initfunc(oc_serial_initialize);
serial_initfunc(s3c64xx_serial_initialize);
serial_initfunc(sandbox_serial_initialize);
@@ -259,7 +258,6 @@ void serial_initialize(void)
atmel_serial_initialize();
lpc32xx_serial_initialize();
mcf_serial_initialize();
- ns9750_serial_initialize();
oc_serial_initialize();
s3c64xx_serial_initialize();
sandbox_serial_initialize();
diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c
index bb865b7..ffa3c1d 100644
--- a/drivers/spi/mxs_spi.c
+++ b/drivers/spi/mxs_spi.c
@@ -40,17 +40,6 @@
#define MXSSSP_SMALL_TRANSFER 512
-/*
- * CONFIG_MXS_SPI_DMA_ENABLE: Experimental mixed PIO/DMA support for MXS SPI
- * host. Use with utmost caution!
- *
- * Enabling this is not yet recommended since this
- * still doesn't support transfers to/from unaligned
- * addresses. Therefore this driver will not work
- * for example with saving environment. This is
- * caused by DMA alignment constraints on MXS.
- */
-
struct mxs_spi_slave {
struct spi_slave slave;
uint32_t max_khz;
@@ -70,7 +59,7 @@ void spi_init(void)
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
{
/* MXS SPI: 4 ports and 3 chip selects maximum */
- if (bus > 3 || cs > 2)
+ if (!mxs_ssp_bus_id_valid(bus) || cs > 2)
return 0;
else
return 1;
@@ -92,7 +81,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
if (!mxs_slave)
return NULL;
- if (mxs_dma_init_channel(bus))
+ if (mxs_dma_init_channel(MXS_DMA_CHANNEL_AHB_APBH_SSP0 + bus))
goto err_init;
mxs_slave->slave.bus = bus;
@@ -168,7 +157,12 @@ static int mxs_spi_xfer_pio(struct mxs_spi_slave *slave,
while (length--) {
/* We transfer 1 byte */
+#if defined(CONFIG_MX23)
+ writel(SSP_CTRL0_XFER_COUNT_MASK, &ssp_regs->hw_ssp_ctrl0_clr);
+ writel(1, &ssp_regs->hw_ssp_ctrl0_set);
+#elif defined(CONFIG_MX28)
writel(1, &ssp_regs->hw_ssp_xfer_size);
+#endif
if ((flags & SPI_XFER_END) && !length)
mxs_spi_end_xfer(ssp_regs);
@@ -226,6 +220,12 @@ static int mxs_spi_xfer_dma(struct mxs_spi_slave *slave,
int tl;
int ret = 0;
+#if defined(CONFIG_MX23)
+ const int mxs_spi_pio_words = 1;
+#elif defined(CONFIG_MX28)
+ const int mxs_spi_pio_words = 4;
+#endif
+
ALLOC_CACHE_ALIGN_BUFFER(struct mxs_dma_desc, desc, desc_count);
memset(desc, 0, sizeof(struct mxs_dma_desc) * desc_count);
@@ -281,7 +281,7 @@ static int mxs_spi_xfer_dma(struct mxs_spi_slave *slave,
dp->cmd.data |=
((tl & 0xffff) << MXS_DMA_DESC_BYTES_OFFSET) |
- (4 << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
+ (mxs_spi_pio_words << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
MXS_DMA_DESC_HALT_ON_TERMINATE |
MXS_DMA_DESC_TERMINATE_FLUSH;
@@ -298,15 +298,19 @@ static int mxs_spi_xfer_dma(struct mxs_spi_slave *slave,
}
/*
- * Write CTRL0, CMD0, CMD1, XFER_SIZE registers. It is
+ * Write CTRL0, CMD0, CMD1 and XFER_SIZE registers in
+ * case of MX28, write only CTRL0 in case of MX23 due
+ * to the difference in register layout. It is utterly
* essential that the XFER_SIZE register is written on
* a per-descriptor basis with the same size as is the
* descriptor!
*/
dp->cmd.pio_words[0] = ctrl0;
+#ifdef CONFIG_MX28
dp->cmd.pio_words[1] = 0;
dp->cmd.pio_words[2] = 0;
dp->cmd.pio_words[3] = tl;
+#endif
mxs_dma_desc_append(dmach, dp);
@@ -332,12 +336,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
char dummy;
int write = 0;
char *data = NULL;
-
-#ifdef CONFIG_MXS_SPI_DMA_ENABLE
int dma = 1;
-#else
- int dma = 0;
-#endif
if (bitlen == 0) {
if (flags & SPI_XFER_END) {
diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
index 1b20e41..c1ae3d9 100644
--- a/drivers/usb/host/ehci-mx6.c
+++ b/drivers/usb/host/ehci-mx6.c
@@ -21,7 +21,6 @@
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
-#include <asm/arch/mx6x_pins.h>
#include <asm/imx-common/iomux-v3.h>
#include "ehci.h"
diff --git a/drivers/usb/host/ehci-mxs.c b/drivers/usb/host/ehci-mxs.c
index 5062af5..f320d3e 100644
--- a/drivers/usb/host/ehci-mxs.c
+++ b/drivers/usb/host/ehci-mxs.c
@@ -21,91 +21,107 @@
#include <common.h>
#include <asm/io.h>
-#include <asm/arch/regs-common.h>
-#include <asm/arch/regs-base.h>
-#include <asm/arch/regs-clkctrl-mx28.h>
-#include <asm/arch/regs-usb.h>
-#include <asm/arch/regs-usbphy.h>
+#include <asm/arch/imx-regs.h>
+#include <errno.h>
#include "ehci.h"
-#if (CONFIG_EHCI_MXS_PORT != 0) && (CONFIG_EHCI_MXS_PORT != 1)
-#error "MXS EHCI: Invalid port selected!"
-#endif
-
-#ifndef CONFIG_EHCI_MXS_PORT
-#error "MXS EHCI: Please define correct port using CONFIG_EHCI_MXS_PORT!"
-#endif
+/* This DIGCTL register ungates clock to USB */
+#define HW_DIGCTL_CTRL 0x8001c000
+#define HW_DIGCTL_CTRL_USB0_CLKGATE (1 << 2)
+#define HW_DIGCTL_CTRL_USB1_CLKGATE (1 << 16)
-static struct ehci_mxs {
- struct mxs_usb_regs *usb_regs;
+struct ehci_mxs_port {
+ uint32_t usb_regs;
struct mxs_usbphy_regs *phy_regs;
-} ehci_mxs;
-int mxs_ehci_get_port(struct ehci_mxs *mxs_usb, int port)
+ struct mxs_register_32 *pll;
+ uint32_t pll_en_bits;
+ uint32_t pll_dis_bits;
+ uint32_t gate_bits;
+};
+
+static const struct ehci_mxs_port mxs_port[] = {
+#ifdef CONFIG_EHCI_MXS_PORT0
+ {
+ MXS_USBCTRL0_BASE,
+ (struct mxs_usbphy_regs *)MXS_USBPHY0_BASE,
+ (struct mxs_register_32 *)(MXS_CLKCTRL_BASE +
+ offsetof(struct mxs_clkctrl_regs,
+ hw_clkctrl_pll0ctrl0_reg)),
+ CLKCTRL_PLL0CTRL0_EN_USB_CLKS | CLKCTRL_PLL0CTRL0_POWER,
+ CLKCTRL_PLL0CTRL0_EN_USB_CLKS,
+ HW_DIGCTL_CTRL_USB0_CLKGATE,
+ },
+#endif
+#ifdef CONFIG_EHCI_MXS_PORT1
+ {
+ MXS_USBCTRL1_BASE,
+ (struct mxs_usbphy_regs *)MXS_USBPHY1_BASE,
+ (struct mxs_register_32 *)(MXS_CLKCTRL_BASE +
+ offsetof(struct mxs_clkctrl_regs,
+ hw_clkctrl_pll1ctrl0_reg)),
+ CLKCTRL_PLL1CTRL0_EN_USB_CLKS | CLKCTRL_PLL1CTRL0_POWER,
+ CLKCTRL_PLL1CTRL0_EN_USB_CLKS,
+ HW_DIGCTL_CTRL_USB1_CLKGATE,
+ },
+#endif
+};
+
+static int ehci_mxs_toggle_clock(const struct ehci_mxs_port *port, int enable)
{
- uint32_t usb_base, phy_base;
- switch (port) {
- case 0:
- usb_base = MXS_USBCTRL0_BASE;
- phy_base = MXS_USBPHY0_BASE;
- break;
- case 1:
- usb_base = MXS_USBCTRL1_BASE;
- phy_base = MXS_USBPHY1_BASE;
- break;
- default:
- printf("CONFIG_EHCI_MXS_PORT (port = %d)\n", port);
- return -1;
+ struct mxs_register_32 *digctl_ctrl =
+ (struct mxs_register_32 *)HW_DIGCTL_CTRL;
+ int pll_offset, dig_offset;
+
+ if (enable) {
+ pll_offset = offsetof(struct mxs_register_32, reg_set);
+ dig_offset = offsetof(struct mxs_register_32, reg_clr);
+ writel(port->gate_bits, (u32)&digctl_ctrl->reg + dig_offset);
+ writel(port->pll_en_bits, (u32)port->pll + pll_offset);
+ } else {
+ pll_offset = offsetof(struct mxs_register_32, reg_clr);
+ dig_offset = offsetof(struct mxs_register_32, reg_set);
+ writel(port->pll_dis_bits, (u32)port->pll + pll_offset);
+ writel(port->gate_bits, (u32)&digctl_ctrl->reg + dig_offset);
}
- mxs_usb->usb_regs = (struct mxs_usb_regs *)usb_base;
- mxs_usb->phy_regs = (struct mxs_usbphy_regs *)phy_base;
return 0;
}
-/* This DIGCTL register ungates clock to USB */
-#define HW_DIGCTL_CTRL 0x8001c000
-#define HW_DIGCTL_CTRL_USB0_CLKGATE (1 << 2)
-#define HW_DIGCTL_CTRL_USB1_CLKGATE (1 << 16)
-
int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
{
int ret;
uint32_t usb_base, cap_base;
- struct mxs_register_32 *digctl_ctrl =
- (struct mxs_register_32 *)HW_DIGCTL_CTRL;
- struct mxs_clkctrl_regs *clkctrl_regs =
- (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
+ const struct ehci_mxs_port *port;
- ret = mxs_ehci_get_port(&ehci_mxs, CONFIG_EHCI_MXS_PORT);
- if (ret)
- return ret;
+ if ((index < 0) || (index >= ARRAY_SIZE(mxs_port))) {
+ printf("Invalid port index (index = %d)!\n", index);
+ return -EINVAL;
+ }
+
+ port = &mxs_port[index];
/* Reset the PHY block */
- writel(USBPHY_CTRL_SFTRST, &ehci_mxs.phy_regs->hw_usbphy_ctrl_set);
+ writel(USBPHY_CTRL_SFTRST, &port->phy_regs->hw_usbphy_ctrl_set);
udelay(10);
writel(USBPHY_CTRL_SFTRST | USBPHY_CTRL_CLKGATE,
- &ehci_mxs.phy_regs->hw_usbphy_ctrl_clr);
+ &port->phy_regs->hw_usbphy_ctrl_clr);
/* Enable USB clock */
- writel(CLKCTRL_PLL0CTRL0_EN_USB_CLKS | CLKCTRL_PLL0CTRL0_POWER,
- &clkctrl_regs->hw_clkctrl_pll0ctrl0_set);
- writel(CLKCTRL_PLL1CTRL0_EN_USB_CLKS | CLKCTRL_PLL1CTRL0_POWER,
- &clkctrl_regs->hw_clkctrl_pll1ctrl0_set);
-
- writel(HW_DIGCTL_CTRL_USB0_CLKGATE | HW_DIGCTL_CTRL_USB1_CLKGATE,
- &digctl_ctrl->reg_clr);
+ ret = ehci_mxs_toggle_clock(port, 1);
+ if (ret)
+ return ret;
/* Start USB PHY */
- writel(0, &ehci_mxs.phy_regs->hw_usbphy_pwd);
+ writel(0, &port->phy_regs->hw_usbphy_pwd);
/* Enable UTMI+ Level 2 and Level 3 compatibility */
writel(USBPHY_CTRL_ENUTMILEVEL3 | USBPHY_CTRL_ENUTMILEVEL2 | 1,
- &ehci_mxs.phy_regs->hw_usbphy_ctrl_set);
+ &port->phy_regs->hw_usbphy_ctrl_set);
- usb_base = ((uint32_t)ehci_mxs.usb_regs) + 0x100;
+ usb_base = port->usb_regs + 0x100;
*hccr = (struct ehci_hccr *)usb_base;
cap_base = ehci_readl(&(*hccr)->cr_capbase);
@@ -118,19 +134,19 @@ int ehci_hcd_stop(int index)
{
int ret;
uint32_t usb_base, cap_base, tmp;
- struct mxs_register_32 *digctl_ctrl =
- (struct mxs_register_32 *)HW_DIGCTL_CTRL;
- struct mxs_clkctrl_regs *clkctrl_regs =
- (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
struct ehci_hccr *hccr;
struct ehci_hcor *hcor;
+ const struct ehci_mxs_port *port;
- ret = mxs_ehci_get_port(&ehci_mxs, CONFIG_EHCI_MXS_PORT);
- if (ret)
- return ret;
+ if ((index < 0) || (index >= ARRAY_SIZE(mxs_port))) {
+ printf("Invalid port index (index = %d)!\n", index);
+ return -EINVAL;
+ }
+
+ port = &mxs_port[index];
/* Stop the USB port */
- usb_base = ((uint32_t)ehci_mxs.usb_regs) + 0x100;
+ usb_base = port->usb_regs + 0x100;
hccr = (struct ehci_hccr *)usb_base;
cap_base = ehci_readl(&hccr->cr_capbase);
hcor = (struct ehci_hcor *)(usb_base + HC_LENGTH(cap_base));
@@ -144,17 +160,10 @@ int ehci_hcd_stop(int index)
USBPHY_PWD_RXPWD1PT1 | USBPHY_PWD_RXPWDENV |
USBPHY_PWD_TXPWDV2I | USBPHY_PWD_TXPWDIBIAS |
USBPHY_PWD_TXPWDFS;
- writel(tmp, &ehci_mxs.phy_regs->hw_usbphy_pwd);
+ writel(tmp, &port->phy_regs->hw_usbphy_pwd);
/* Disable USB clock */
- writel(CLKCTRL_PLL0CTRL0_EN_USB_CLKS,
- &clkctrl_regs->hw_clkctrl_pll0ctrl0_clr);
- writel(CLKCTRL_PLL1CTRL0_EN_USB_CLKS,
- &clkctrl_regs->hw_clkctrl_pll1ctrl0_clr);
+ ret = ehci_mxs_toggle_clock(port, 0);
- /* Gate off the USB clock */
- writel(HW_DIGCTL_CTRL_USB0_CLKGATE | HW_DIGCTL_CTRL_USB1_CLKGATE,
- &digctl_ctrl->reg_set);
-
- return 0;
+ return ret;
}
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index a1c43f8..554145a 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -1,5 +1,7 @@
/*
+ * Copyright (c) 2011 The Chromium OS Authors.
* Copyright (c) 2009-2012 NVIDIA Corporation
+ * Copyright (c) 2013 Lucas Stach
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -21,12 +23,128 @@
*/
#include <common.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm-generic/gpio.h>
+#include <asm/arch/clock.h>
+#include <asm/arch-tegra/usb.h>
#include <usb.h>
+#include <usb/ulpi.h>
+#include <libfdt.h>
+#include <fdtdec.h>
#include "ehci.h"
-#include <asm/errno.h>
-#include <asm/arch/usb.h>
+#ifdef CONFIG_USB_ULPI
+ #ifndef CONFIG_USB_ULPI_VIEWPORT
+ #error "To use CONFIG_USB_ULPI on Tegra Boards you have to also \
+ define CONFIG_USB_ULPI_VIEWPORT"
+ #endif
+#endif
+
+enum {
+ USB_PORTS_MAX = 3, /* Maximum ports we allow */
+};
+
+/* Parameters we need for USB */
+enum {
+ PARAM_DIVN, /* PLL FEEDBACK DIVIDer */
+ PARAM_DIVM, /* PLL INPUT DIVIDER */
+ PARAM_DIVP, /* POST DIVIDER (2^N) */
+ PARAM_CPCON, /* BASE PLLC CHARGE Pump setup ctrl */
+ PARAM_LFCON, /* BASE PLLC LOOP FILter setup ctrl */
+ PARAM_ENABLE_DELAY_COUNT, /* PLL-U Enable Delay Count */
+ PARAM_STABLE_COUNT, /* PLL-U STABLE count */
+ PARAM_ACTIVE_DELAY_COUNT, /* PLL-U Active delay count */
+ PARAM_XTAL_FREQ_COUNT, /* PLL-U XTAL frequency count */
+ PARAM_DEBOUNCE_A_TIME, /* 10MS DELAY for BIAS_DEBOUNCE_A */
+ PARAM_BIAS_TIME, /* 20US DELAY AFter bias cell op */
+
+ PARAM_COUNT
+};
+
+/* Possible port types (dual role mode) */
+enum dr_mode {
+ DR_MODE_NONE = 0,
+ DR_MODE_HOST, /* supports host operation */
+ DR_MODE_DEVICE, /* supports device operation */
+ DR_MODE_OTG, /* supports both */
+};
+
+/* Information about a USB port */
+struct fdt_usb {
+ struct usb_ctlr *reg; /* address of registers in physical memory */
+ unsigned utmi:1; /* 1 if port has external tranceiver, else 0 */
+ unsigned ulpi:1; /* 1 if port has external ULPI transceiver */
+ unsigned enabled:1; /* 1 to enable, 0 to disable */
+ unsigned has_legacy_mode:1; /* 1 if this port has legacy mode */
+ unsigned initialized:1; /* has this port already been initialized? */
+ enum dr_mode dr_mode; /* dual role mode */
+ enum periph_id periph_id;/* peripheral id */
+ struct fdt_gpio_state vbus_gpio; /* GPIO for vbus enable */
+ struct fdt_gpio_state phy_reset_gpio; /* GPIO to reset ULPI phy */
+};
+
+static struct fdt_usb port[USB_PORTS_MAX]; /* List of valid USB ports */
+static unsigned port_count; /* Number of available ports */
+
+/*
+ * This table has USB timing parameters for each Oscillator frequency we
+ * support. There are four sets of values:
+ *
+ * 1. PLLU configuration information (reference clock is osc/clk_m and
+ * PLLU-FOs are fixed at 12MHz/60MHz/480MHz).
+ *
+ * Reference frequency 13.0MHz 19.2MHz 12.0MHz 26.0MHz
+ * ----------------------------------------------------------------------
+ * DIVN 960 (0x3c0) 200 (0c8) 960 (3c0h) 960 (3c0)
+ * DIVM 13 (0d) 4 (04) 12 (0c) 26 (1a)
+ * Filter frequency (MHz) 1 4.8 6 2
+ * CPCON 1100b 0011b 1100b 1100b
+ * LFCON0 0 0 0 0
+ *
+ * 2. PLL CONFIGURATION & PARAMETERS for different clock generators:
+ *
+ * Reference frequency 13.0MHz 19.2MHz 12.0MHz 26.0MHz
+ * ---------------------------------------------------------------------------
+ * PLLU_ENABLE_DLY_COUNT 02 (0x02) 03 (03) 02 (02) 04 (04)
+ * PLLU_STABLE_COUNT 51 (33) 75 (4B) 47 (2F) 102 (66)
+ * PLL_ACTIVE_DLY_COUNT 05 (05) 06 (06) 04 (04) 09 (09)
+ * XTAL_FREQ_COUNT 127 (7F) 187 (BB) 118 (76) 254 (FE)
+ *
+ * 3. Debounce values IdDig, Avalid, Bvalid, VbusValid, VbusWakeUp, and
+ * SessEnd. Each of these signals have their own debouncer and for each of
+ * those one out of two debouncing times can be chosen (BIAS_DEBOUNCE_A or
+ * BIAS_DEBOUNCE_B).
+ *
+ * The values of DEBOUNCE_A and DEBOUNCE_B are calculated as follows:
+ * 0xffff -> No debouncing at all
+ * <n> ms = <n> *1000 / (1/19.2MHz) / 4
+ *
+ * So to program a 1 ms debounce for BIAS_DEBOUNCE_A, we have:
+ * BIAS_DEBOUNCE_A[15:0] = 1000 * 19.2 / 4 = 4800 = 0x12c0
+ *
+ * We need to use only DebounceA for BOOTROM. We don't need the DebounceB
+ * values, so we can keep those to default.
+ *
+ * 4. The 20 microsecond delay after bias cell operation.
+ */
+static const unsigned usb_pll[CLOCK_OSC_FREQ_COUNT][PARAM_COUNT] = {
+ /* DivN, DivM, DivP, CPCON, LFCON, Delays Debounce, Bias */
+ { 0x3C0, 0x0D, 0x00, 0xC, 0, 0x02, 0x33, 0x05, 0x7F, 0x7EF4, 5 },
+ { 0x0C8, 0x04, 0x00, 0x3, 0, 0x03, 0x4B, 0x06, 0xBB, 0xBB80, 7 },
+ { 0x3C0, 0x0C, 0x00, 0xC, 0, 0x02, 0x2F, 0x04, 0x76, 0x7530, 5 },
+ { 0x3C0, 0x1A, 0x00, 0xC, 0, 0x04, 0x66, 0x09, 0xFE, 0xFDE8, 9 }
+};
+
+/* UTMIP Idle Wait Delay */
+static const u8 utmip_idle_wait_delay = 17;
+
+/* UTMIP Elastic limit */
+static const u8 utmip_elastic_limit = 16;
+
+/* UTMIP High Speed Sync Start Delay */
+static const u8 utmip_hs_sync_start_delay = 9;
/*
* A known hardware issue where Connect Status Change bit of PORTSC register
@@ -45,32 +163,428 @@ void ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg)
*reg |= EHCI_PS_CSC;
}
-/*
- * Create the appropriate control structures to manage
- * a new EHCI host controller.
- */
-int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+/* Put the port into host mode */
+static void set_host_mode(struct fdt_usb *config)
+{
+ /*
+ * If we are an OTG port, check if remote host is driving VBus and
+ * bail out in this case.
+ */
+ if (config->dr_mode == DR_MODE_OTG &&
+ (readl(&config->reg->phy_vbus_sensors) & VBUS_VLD_STS))
+ return;
+
+ /*
+ * If not driving, we set the GPIO to enable VBUS. We assume
+ * that the pinmux is set up correctly for this.
+ */
+ if (fdt_gpio_isvalid(&config->vbus_gpio)) {
+ fdtdec_setup_gpio(&config->vbus_gpio);
+ gpio_direction_output(config->vbus_gpio.gpio,
+ (config->vbus_gpio.flags & FDT_GPIO_ACTIVE_LOW) ?
+ 0 : 1);
+ debug("set_host_mode: GPIO %d %s\n", config->vbus_gpio.gpio,
+ (config->vbus_gpio.flags & FDT_GPIO_ACTIVE_LOW) ?
+ "low" : "high");
+ }
+}
+
+void usbf_reset_controller(struct fdt_usb *config, struct usb_ctlr *usbctlr)
+{
+ /* Reset the USB controller with 2us delay */
+ reset_periph(config->periph_id, 2);
+
+ /*
+ * Set USB1_NO_LEGACY_MODE to 1, Registers are accessible under
+ * base address
+ */
+ if (config->has_legacy_mode)
+ setbits_le32(&usbctlr->usb1_legacy_ctrl, USB1_NO_LEGACY_MODE);
+
+ /* Put UTMIP1/3 in reset */
+ setbits_le32(&usbctlr->susp_ctrl, UTMIP_RESET);
+
+ /* Enable the UTMIP PHY */
+ if (config->utmi)
+ setbits_le32(&usbctlr->susp_ctrl, UTMIP_PHY_ENB);
+}
+
+/* set up the UTMI USB controller with the parameters provided */
+static int init_utmi_usb_controller(struct fdt_usb *config)
{
- u32 our_hccr, our_hcor;
+ u32 val;
+ int loop_count;
+ const unsigned *timing;
+ struct usb_ctlr *usbctlr = config->reg;
+
+ clock_enable(config->periph_id);
+
+ /* Reset the usb controller */
+ usbf_reset_controller(config, usbctlr);
+
+ /* Stop crystal clock by setting UTMIP_PHY_XTAL_CLOCKEN low */
+ clrbits_le32(&usbctlr->utmip_misc_cfg1, UTMIP_PHY_XTAL_CLOCKEN);
+
+ /* Follow the crystal clock disable by >100ns delay */
+ udelay(1);
+
+ /*
+ * To Use the A Session Valid for cable detection logic, VBUS_WAKEUP
+ * mux must be switched to actually use a_sess_vld threshold.
+ */
+ if (fdt_gpio_isvalid(&config->vbus_gpio)) {
+ clrsetbits_le32(&usbctlr->usb1_legacy_ctrl,
+ VBUS_SENSE_CTL_MASK,
+ VBUS_SENSE_CTL_A_SESS_VLD << VBUS_SENSE_CTL_SHIFT);
+ }
+
+ /*
+ * PLL Delay CONFIGURATION settings. The following parameters control
+ * the bring up of the plls.
+ */
+ timing = usb_pll[clock_get_osc_freq()];
+
+ val = readl(&usbctlr->utmip_misc_cfg1);
+ clrsetbits_le32(&val, UTMIP_PLLU_STABLE_COUNT_MASK,
+ timing[PARAM_STABLE_COUNT] << UTMIP_PLLU_STABLE_COUNT_SHIFT);
+ clrsetbits_le32(&val, UTMIP_PLL_ACTIVE_DLY_COUNT_MASK,
+ timing[PARAM_ACTIVE_DELAY_COUNT] <<
+ UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT);
+ writel(val, &usbctlr->utmip_misc_cfg1);
+
+ /* Set PLL enable delay count and crystal frequency count */
+ val = readl(&usbctlr->utmip_pll_cfg1);
+ clrsetbits_le32(&val, UTMIP_PLLU_ENABLE_DLY_COUNT_MASK,
+ timing[PARAM_ENABLE_DELAY_COUNT] <<
+ UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT);
+ clrsetbits_le32(&val, UTMIP_XTAL_FREQ_COUNT_MASK,
+ timing[PARAM_XTAL_FREQ_COUNT] <<
+ UTMIP_XTAL_FREQ_COUNT_SHIFT);
+ writel(val, &usbctlr->utmip_pll_cfg1);
+
+ /* Setting the tracking length time */
+ clrsetbits_le32(&usbctlr->utmip_bias_cfg1,
+ UTMIP_BIAS_PDTRK_COUNT_MASK,
+ timing[PARAM_BIAS_TIME] << UTMIP_BIAS_PDTRK_COUNT_SHIFT);
+
+ /* Program debounce time for VBUS to become valid */
+ clrsetbits_le32(&usbctlr->utmip_debounce_cfg0,
+ UTMIP_DEBOUNCE_CFG0_MASK,
+ timing[PARAM_DEBOUNCE_A_TIME] << UTMIP_DEBOUNCE_CFG0_SHIFT);
+
+ setbits_le32(&usbctlr->utmip_tx_cfg0, UTMIP_FS_PREAMBLE_J);
+
+ /* Disable battery charge enabling bit */
+ setbits_le32(&usbctlr->utmip_bat_chrg_cfg0, UTMIP_PD_CHRG);
+
+ clrbits_le32(&usbctlr->utmip_xcvr_cfg0, UTMIP_XCVR_LSBIAS_SE);
+ setbits_le32(&usbctlr->utmip_spare_cfg0, FUSE_SETUP_SEL);
/*
- * Select the first port, as we don't have a way of selecting others
- * yet
+ * Configure the UTMIP_IDLE_WAIT and UTMIP_ELASTIC_LIMIT
+ * Setting these fields, together with default values of the
+ * other fields, results in programming the registers below as
+ * follows:
+ * UTMIP_HSRX_CFG0 = 0x9168c000
+ * UTMIP_HSRX_CFG1 = 0x13
*/
- if (tegrausb_start_port(index, &our_hccr, &our_hcor))
+
+ /* Set PLL enable delay count and Crystal frequency count */
+ val = readl(&usbctlr->utmip_hsrx_cfg0);
+ clrsetbits_le32(&val, UTMIP_IDLE_WAIT_MASK,
+ utmip_idle_wait_delay << UTMIP_IDLE_WAIT_SHIFT);
+ clrsetbits_le32(&val, UTMIP_ELASTIC_LIMIT_MASK,
+ utmip_elastic_limit << UTMIP_ELASTIC_LIMIT_SHIFT);
+ writel(val, &usbctlr->utmip_hsrx_cfg0);
+
+ /* Configure the UTMIP_HS_SYNC_START_DLY */
+ clrsetbits_le32(&usbctlr->utmip_hsrx_cfg1,
+ UTMIP_HS_SYNC_START_DLY_MASK,
+ utmip_hs_sync_start_delay << UTMIP_HS_SYNC_START_DLY_SHIFT);
+
+ /* Preceed the crystal clock disable by >100ns delay. */
+ udelay(1);
+
+ /* Resuscitate crystal clock by setting UTMIP_PHY_XTAL_CLOCKEN */
+ setbits_le32(&usbctlr->utmip_misc_cfg1, UTMIP_PHY_XTAL_CLOCKEN);
+
+ /* Finished the per-controller init. */
+
+ /* De-assert UTMIP_RESET to bring out of reset. */
+ clrbits_le32(&usbctlr->susp_ctrl, UTMIP_RESET);
+
+ /* Wait for the phy clock to become valid in 100 ms */
+ for (loop_count = 100000; loop_count != 0; loop_count--) {
+ if (readl(&usbctlr->susp_ctrl) & USB_PHY_CLK_VALID)
+ break;
+ udelay(1);
+ }
+ if (!loop_count)
+ return -1;
+
+ /* Disable ICUSB FS/LS transceiver */
+ clrbits_le32(&usbctlr->icusb_ctrl, IC_ENB1);
+
+ /* Select UTMI parallel interface */
+ clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK,
+ PTS_UTMI << PTS_SHIFT);
+ clrbits_le32(&usbctlr->port_sc1, STS);
+
+ /* Deassert power down state */
+ clrbits_le32(&usbctlr->utmip_xcvr_cfg0, UTMIP_FORCE_PD_POWERDOWN |
+ UTMIP_FORCE_PD2_POWERDOWN | UTMIP_FORCE_PDZI_POWERDOWN);
+ clrbits_le32(&usbctlr->utmip_xcvr_cfg1, UTMIP_FORCE_PDDISC_POWERDOWN |
+ UTMIP_FORCE_PDCHRP_POWERDOWN | UTMIP_FORCE_PDDR_POWERDOWN);
+
+ return 0;
+}
+
+#ifdef CONFIG_USB_ULPI
+/* if board file does not set a ULPI reference frequency we default to 24MHz */
+#ifndef CONFIG_ULPI_REF_CLK
+#define CONFIG_ULPI_REF_CLK 24000000
+#endif
+
+/* set up the ULPI USB controller with the parameters provided */
+static int init_ulpi_usb_controller(struct fdt_usb *config)
+{
+ u32 val;
+ int loop_count;
+ struct ulpi_viewport ulpi_vp;
+ struct usb_ctlr *usbctlr = config->reg;
+
+ /* set up ULPI reference clock on pllp_out4 */
+ clock_enable(PERIPH_ID_DEV2_OUT);
+ clock_set_pllout(CLOCK_ID_PERIPH, PLL_OUT4, CONFIG_ULPI_REF_CLK);
+
+ /* reset ULPI phy */
+ if (fdt_gpio_isvalid(&config->phy_reset_gpio)) {
+ fdtdec_setup_gpio(&config->phy_reset_gpio);
+ gpio_direction_output(config->phy_reset_gpio.gpio, 0);
+ mdelay(5);
+ gpio_set_value(config->phy_reset_gpio.gpio, 1);
+ }
+
+ /* Reset the usb controller */
+ clock_enable(config->periph_id);
+ usbf_reset_controller(config, usbctlr);
+
+ /* enable pinmux bypass */
+ setbits_le32(&usbctlr->ulpi_timing_ctrl_0,
+ ULPI_CLKOUT_PINMUX_BYP | ULPI_OUTPUT_PINMUX_BYP);
+
+ /* Select ULPI parallel interface */
+ clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK, PTS_ULPI << PTS_SHIFT);
+
+ /* enable ULPI transceiver */
+ setbits_le32(&usbctlr->susp_ctrl, ULPI_PHY_ENB);
+
+ /* configure ULPI transceiver timings */
+ val = 0;
+ writel(val, &usbctlr->ulpi_timing_ctrl_1);
+
+ val |= ULPI_DATA_TRIMMER_SEL(4);
+ val |= ULPI_STPDIRNXT_TRIMMER_SEL(4);
+ val |= ULPI_DIR_TRIMMER_SEL(4);
+ writel(val, &usbctlr->ulpi_timing_ctrl_1);
+ udelay(10);
+
+ val |= ULPI_DATA_TRIMMER_LOAD;
+ val |= ULPI_STPDIRNXT_TRIMMER_LOAD;
+ val |= ULPI_DIR_TRIMMER_LOAD;
+ writel(val, &usbctlr->ulpi_timing_ctrl_1);
+
+ /* set up phy for host operation with external vbus supply */
+ ulpi_vp.port_num = 0;
+ ulpi_vp.viewport_addr = (u32)&usbctlr->ulpi_viewport;
+
+ if (ulpi_init(&ulpi_vp)) {
+ printf("Tegra ULPI viewport init failed\n");
+ return -1;
+ }
+
+ ulpi_set_vbus(&ulpi_vp, 1, 1);
+ ulpi_set_vbus_indicator(&ulpi_vp, 1, 1, 0);
+
+ /* enable wakeup events */
+ setbits_le32(&usbctlr->port_sc1, WKCN | WKDS | WKOC);
+
+ /* Enable and wait for the phy clock to become valid in 100 ms */
+ setbits_le32(&usbctlr->susp_ctrl, USB_SUSP_CLR);
+ for (loop_count = 100000; loop_count != 0; loop_count--) {
+ if (readl(&usbctlr->susp_ctrl) & USB_PHY_CLK_VALID)
+ break;
+ udelay(1);
+ }
+ if (!loop_count)
+ return -1;
+ clrbits_le32(&usbctlr->susp_ctrl, USB_SUSP_CLR);
+
+ return 0;
+}
+#else
+static int init_ulpi_usb_controller(struct fdt_usb *config)
+{
+ printf("No code to set up ULPI controller, please enable"
+ "CONFIG_USB_ULPI and CONFIG_USB_ULPI_VIEWPORT");
+ return -1;
+}
+#endif
+
+static void config_clock(const u32 timing[])
+{
+ clock_start_pll(CLOCK_ID_USB,
+ timing[PARAM_DIVM], timing[PARAM_DIVN], timing[PARAM_DIVP],
+ timing[PARAM_CPCON], timing[PARAM_LFCON]);
+}
+
+int fdt_decode_usb(const void *blob, int node, struct fdt_usb *config)
+{
+ const char *phy, *mode;
+
+ config->reg = (struct usb_ctlr *)fdtdec_get_addr(blob, node, "reg");
+ mode = fdt_getprop(blob, node, "dr_mode", NULL);
+ if (mode) {
+ if (0 == strcmp(mode, "host"))
+ config->dr_mode = DR_MODE_HOST;
+ else if (0 == strcmp(mode, "peripheral"))
+ config->dr_mode = DR_MODE_DEVICE;
+ else if (0 == strcmp(mode, "otg"))
+ config->dr_mode = DR_MODE_OTG;
+ else {
+ debug("%s: Cannot decode dr_mode '%s'\n", __func__,
+ mode);
+ return -FDT_ERR_NOTFOUND;
+ }
+ } else {
+ config->dr_mode = DR_MODE_HOST;
+ }
+
+ phy = fdt_getprop(blob, node, "phy_type", NULL);
+ config->utmi = phy && 0 == strcmp("utmi", phy);
+ config->ulpi = phy && 0 == strcmp("ulpi", phy);
+ config->enabled = fdtdec_get_is_enabled(blob, node);
+ config->has_legacy_mode = fdtdec_get_bool(blob, node,
+ "nvidia,has-legacy-mode");
+ config->periph_id = clock_decode_periph_id(blob, node);
+ if (config->periph_id == PERIPH_ID_NONE) {
+ debug("%s: Missing/invalid peripheral ID\n", __func__);
+ return -FDT_ERR_NOTFOUND;
+ }
+ fdtdec_decode_gpio(blob, node, "nvidia,vbus-gpio", &config->vbus_gpio);
+ fdtdec_decode_gpio(blob, node, "nvidia,phy-reset-gpio",
+ &config->phy_reset_gpio);
+ debug("enabled=%d, legacy_mode=%d, utmi=%d, ulpi=%d, periph_id=%d, "
+ "vbus=%d, phy_reset=%d, dr_mode=%d\n",
+ config->enabled, config->has_legacy_mode, config->utmi,
+ config->ulpi, config->periph_id, config->vbus_gpio.gpio,
+ config->phy_reset_gpio.gpio, config->dr_mode);
+
+ return 0;
+}
+
+int board_usb_init(const void *blob)
+{
+ struct fdt_usb config;
+ enum clock_osc_freq freq;
+ int node_list[USB_PORTS_MAX];
+ int node, count, i;
+
+ /* Set up the USB clocks correctly based on our oscillator frequency */
+ freq = clock_get_osc_freq();
+ config_clock(usb_pll[freq]);
+
+ /* count may return <0 on error */
+ count = fdtdec_find_aliases_for_id(blob, "usb",
+ COMPAT_NVIDIA_TEGRA20_USB, node_list, USB_PORTS_MAX);
+ for (i = 0; i < count; i++) {
+ if (port_count == USB_PORTS_MAX) {
+ printf("tegrausb: Cannot register more than %d ports\n",
+ USB_PORTS_MAX);
+ return -1;
+ }
+
+ debug("USB %d: ", i);
+ node = node_list[i];
+ if (!node)
+ continue;
+ if (fdt_decode_usb(blob, node, &config)) {
+ debug("Cannot decode USB node %s\n",
+ fdt_get_name(blob, node, NULL));
+ return -1;
+ }
+ config.initialized = 0;
+
+ /* add new USB port to the list of available ports */
+ port[port_count++] = config;
+ }
+
+ return 0;
+}
+
+/**
+ * Start up the given port number (ports are numbered from 0 on each board).
+ * This returns values for the appropriate hccr and hcor addresses to use for
+ * USB EHCI operations.
+ *
+ * @param index port number to start
+ * @param hccr returns start address of EHCI HCCR registers
+ * @param hcor returns start address of EHCI HCOR registers
+ * @return 0 if ok, -1 on error (generally invalid port number)
+ */
+int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+{
+ struct fdt_usb *config;
+ struct usb_ctlr *usbctlr;
+
+ if (index >= port_count)
return -1;
- *hccr = (struct ehci_hccr *)our_hccr;
- *hcor = (struct ehci_hcor *)our_hcor;
+ config = &port[index];
+
+ /* skip init, if the port is already initialized */
+ if (config->initialized)
+ goto success;
+
+ if (config->utmi && init_utmi_usb_controller(config)) {
+ printf("tegrausb: Cannot init port %d\n", index);
+ return -1;
+ }
+
+ if (config->ulpi && init_ulpi_usb_controller(config)) {
+ printf("tegrausb: Cannot init port %d\n", index);
+ return -1;
+ }
+ set_host_mode(config);
+
+ config->initialized = 1;
+
+success:
+ usbctlr = config->reg;
+ *hccr = (struct ehci_hccr *)&usbctlr->cap_length;
+ *hcor = (struct ehci_hcor *)&usbctlr->usb_cmd;
return 0;
}
/*
- * Destroy the appropriate control structures corresponding
- * the the EHCI host controller.
+ * Bring down the specified USB controller
*/
int ehci_hcd_stop(int index)
{
- return tegrausb_stop_port(index);
+ struct usb_ctlr *usbctlr;
+
+ usbctlr = port[index].reg;
+
+ /* Stop controller */
+ writel(0, &usbctlr->usb_cmd);
+ udelay(1000);
+
+ /* Initiate controller reset */
+ writel(2, &usbctlr->usb_cmd);
+ udelay(1000);
+
+ port[index].initialized = 0;
+
+ return 0;
}
diff --git a/drivers/video/omap3_dss.c b/drivers/video/omap3_dss.c
index b1424bf..6efba12 100644
--- a/drivers/video/omap3_dss.c
+++ b/drivers/video/omap3_dss.c
@@ -121,7 +121,7 @@ void omap3_dss_panel_config(const struct panel_config *panel_cfg)
if (!panel_cfg->frame_buffer)
return;
- writel(8 << GFX_FORMAT_SHIFT | GFX_ENABLE, &dispc->gfx_attributes);
+ writel(panel_cfg->gfx_format | GFX_ENABLE, &dispc->gfx_attributes);
writel(1, &dispc->gfx_row_inc);
writel(1, &dispc->gfx_pixel_inc);
writel(panel_cfg->lcd_size, &dispc->gfx_size);
diff --git a/dts/Makefile b/dts/Makefile
index 922c78c..6f36153 100644
--- a/dts/Makefile
+++ b/dts/Makefile
@@ -38,7 +38,8 @@ Please define CONFIG_ARCH_DEVICE_TREE))
# We preprocess the device tree file provide a useful define
DTS_CPPFLAGS := -x assembler-with-cpp \
-DARCH_CPU_DTS=\"$(SRCTREE)/arch/$(ARCH)/dts/$(CONFIG_ARCH_DEVICE_TREE).dtsi\" \
- -DBOARD_DTS=\"$(SRCTREE)/board/$(VENDOR)/$(BOARD)/dts/$(DEVICE_TREE).dts\"
+ -DBOARD_DTS=\"$(SRCTREE)/board/$(VENDOR)/$(BOARD)/dts/$(DEVICE_TREE).dts\" \
+ -I$(SRCTREE)/board/$(VENDOR)/dts -I$(SRCTREE)/arch/$(ARCH)/dts
all: $(obj).depend $(LIB)
diff --git a/helper.mk b/helper.mk
deleted file mode 100644
index 79a1da0..0000000
--- a/helper.mk
+++ /dev/null
@@ -1,64 +0,0 @@
-#
-# Copyright (C) 2012 Marek Vasut <marex@denx.de>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-#########################################################################
-
-##
-# make_u_boot_list - Generate contents of u_boot_list section
-# 1: The name of the resulting file (usually u-boot.lst)
-# 2: Files to analyze for possible u_boot_list entries
-#
-# This function generates the contents of the u_boot_list section,
-# including all the border symbols for it's subsections. The operation
-# of this function is as follows, numbering goes per lines:
-#
-# 1) Dump the ELF header sections from all files supplied via $(2)
-# 2) Filter out all other stuff that does not belong into .u_boot_list
-# section.
-# 3) Fix up the lines so that the resulting output is is in format
-# ".u_boot_list.*".
-# 4) Remove the last .something$, since that only contains the name
-# of the variable to be put into a subsection. This name is irelevant
-# for generation of border symbols, thus of no interest, remove it.
-# 5) Take each line and for every dot "." in that line, print the whole
-# line until that dot "." . This is important so that we have all
-# parent border symbols generated as well.
-# 6) Load every line and firstly append "\a" at the end and print the
-# line. Next, append "@" at the end and print the line. Finally,
-# append "~" at the end of line. This will make sense in conjunction
-# with 6) and 7).
-# 7) Sort the lines. It is imperative to use LC_COLLATE=C here because
-# with this, the "\a" symbol is first and "~" symbol is last. Any
-# other symbols fall inbetween. Symbols like "@", which marks the
-# end of current line (representing current section) and ".", which
-# means the line continues and thus represents subsection.
-# 8) With such ordering, all lines ending with "\a" will float at the
-# begining of all lines with the same prefix. Thus it is easy to
-# replace "\a" with __start and make it the __start border symbol.
-# Very similarly for "~", which will be always at the bottom and so
-# can be replaced by "__end" and made into the __end border symbol.
-# Finally, every line ending with "@" symbol will be transformed
-# into " *(SORT(${line}*)); " format, which in the linker parlance
-# will allow it to trap all symbols relevant to the subsection.
-#
-define make_u_boot_list
-$(1): $(2)
- $(OBJDUMP) -h $(2) | \
- sed -n -e '/.*\.u_boot_list[^ ]\+/ ! {d;n}' \
- -e 's/.*\(\.u_boot_list[^ ]\+\).*$$$$/\1/' \
- -e 's/\.[^\.]\+$$$$//' \
- -e ':s /^.\+$$$$/ { p;s/^\(.*\)\.[^\.]*$$$$/\1/;b s }' | \
- sed -n -e 'h;s/$$$$/\a/p;g;s/$$$$/@/p;g;s/$$$$/~/p;' | \
- LC_COLLATE=C sort -u | \
- sed -n -e '/\a$$$$/ { s/\./_/g;s/\a$$$$/__start = .;/p; }'\
- -e '/~$$$$/ { s/\./_/g;s/~$$$$/__end = .;/p; }'\
- -e '/@$$$$/ { s/\(.*\)@$$$$/*(SORT(\1.*));/p }' > $(1)
-endef
diff --git a/include/command.h b/include/command.h
index 3785eb9..65692fd 100644
--- a/include/command.h
+++ b/include/command.h
@@ -175,7 +175,7 @@ int cmd_process(int flag, int argc, char * const argv[],
_usage, _help, NULL)
#define U_BOOT_CMD_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, _help, _comp) \
- ll_entry_declare(cmd_tbl_t, _name, cmd, cmd) = \
+ ll_entry_declare(cmd_tbl_t, _name, cmd) = \
U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd, \
_usage, _help, _comp);
diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h
index bfb9680..9298d0e 100644
--- a/include/config_fallbacks.h
+++ b/include/config_fallbacks.h
@@ -26,4 +26,15 @@
#define CONFIG_EXT4_WRITE
#endif
+/* Rather than repeat this expression each time, add a define for it */
+#if defined(CONFIG_CMD_IDE) || \
+ defined(CONFIG_CMD_SATA) || \
+ defined(CONFIG_CMD_SCSI) || \
+ defined(CONFIG_CMD_USB) || \
+ defined(CONFIG_CMD_PART) || \
+ defined(CONFIG_MMC) || \
+ defined(CONFIG_SYSTEMACE)
+#define HAVE_BLOCK_DEVICE
+#endif
+
#endif /* __CONFIG_FALLBACKS_H */
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 33ee2c4..9eada95 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -35,6 +35,7 @@
#define CONFIG_MACH_TYPE MACH_TYPE_TIAM335EVM
#define CONFIG_OF_LIBFDT
+#define CONFIG_CMD_BOOTZ
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
@@ -49,6 +50,7 @@
#define CONFIG_BOOTDELAY 1
#define CONFIG_ENV_VARS_UBOOT_CONFIG
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+#ifndef CONFIG_SPL_BUILD
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x80200000\0" \
"fdtaddr=0x80F80000\0" \
@@ -61,12 +63,38 @@
"mmcdev=0\0" \
"mmcroot=/dev/mmcblk0p2 ro\0" \
"mmcrootfstype=ext4 rootwait\0" \
+ "nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \
+ "nandrootfstype=ubifs rootwait=1\0" \
+ "nandsrcaddr=0x280000\0" \
+ "nandimgsize=0x500000\0" \
+ "rootpath=/export/rootfs\0" \
+ "nfsopts=nolock\0" \
+ "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
+ "::off\0" \
"ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \
"ramrootfstype=ext2\0" \
"mmcargs=setenv bootargs console=${console} " \
"${optargs} " \
"root=${mmcroot} " \
"rootfstype=${mmcrootfstype}\0" \
+ "nandargs=setenv bootargs console=${console} " \
+ "${optargs} " \
+ "root=${nandroot} " \
+ "rootfstype=${nandrootfstype}\0" \
+ "spiroot=/dev/mtdblock4 rw\0" \
+ "spirootfstype=jffs2\0" \
+ "spisrcaddr=0xe0000\0" \
+ "spiimgsize=0x362000\0" \
+ "spibusno=0\0" \
+ "spiargs=setenv bootargs console=${console} " \
+ "${optargs} " \
+ "root=${spiroot} " \
+ "rootfstype=${spirootfstype}\0" \
+ "netargs=setenv bootargs console=${console} " \
+ "${optargs} " \
+ "root=/dev/nfs " \
+ "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
+ "ip=dhcp\0" \
"bootenv=uEnv.txt\0" \
"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
"importbootenv=echo Importing environment from mmc ...; " \
@@ -81,6 +109,21 @@
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
"bootm ${loadaddr}\0" \
+ "nandboot=echo Booting from nand ...; " \
+ "run nandargs; " \
+ "nand read ${loadaddr} ${nandsrcaddr} ${nandimgsize}; " \
+ "bootm ${loadaddr}\0" \
+ "spiboot=echo Booting from spi ...; " \
+ "run spiargs; " \
+ "sf probe ${spibusno}:0; " \
+ "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
+ "bootm ${loadaddr}\0" \
+ "netboot=echo Booting from network ...; " \
+ "setenv autoload no; " \
+ "dhcp; " \
+ "tftp ${loadaddr} ${bootfile}; " \
+ "run netargs; " \
+ "bootm ${loadaddr}\0" \
"ramboot=echo Booting from ramdisk ...; " \
"run ramargs; " \
"bootm ${loadaddr}\0" \
@@ -92,6 +135,8 @@
"if test $board_name = A335X_SK; then " \
"setenv fdtfile am335x-evmsk.dtb; fi\0" \
+#endif
+
#define CONFIG_BOOTCOMMAND \
"mmc dev ${mmcdev}; if mmc rescan; then " \
"echo SD/MMC found on device ${mmcdev};" \
@@ -106,6 +151,8 @@
"if run loaduimage; then " \
"run mmcboot;" \
"fi;" \
+ "else " \
+ "run nandboot;" \
"fi;" \
/* Clock Defines */
@@ -237,9 +284,9 @@
#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SPL_SPI_BUS 0
#define CONFIG_SPL_SPI_CS 0
-#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
-#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x80000
+#define CONFIG_SPL_MUSB_NEW_SUPPORT
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_NAND_AM33XX_BCH
@@ -312,8 +359,38 @@
#ifdef CONFIG_MUSB_GADGET
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_RNDIS
+#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
#endif /* CONFIG_MUSB_GADGET */
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
+/* disable host part of MUSB in SPL */
+#undef CONFIG_MUSB_HOST
+/*
+ * Disable CPSW SPL support so we fit within the 101KiB limit.
+ */
+#undef CONFIG_SPL_ETH_SUPPORT
+#endif
+
+/*
+ * Default to using SPI for environment, etc. We have multiple copies
+ * of SPL as the ROM will check these locations.
+ * 0x0 - 0x20000 : First copy of SPL
+ * 0x20000 - 0x40000 : Second copy of SPL
+ * 0x40000 - 0x60000 : Third copy of SPL
+ * 0x60000 - 0x80000 : Fourth copy of SPL
+ * 0x80000 - 0xDF000 : U-Boot
+ * 0xDF000 - 0xE0000 : U-Boot Environment
+ * 0xE0000 - 0x442000 : Linux Kernel
+ * 0x442000 - 0x800000 : Userland
+ */
+#if defined(CONFIG_SPI_BOOT)
+# undef CONFIG_ENV_IS_NOWHERE
+# define CONFIG_ENV_IS_IN_SPI_FLASH
+# define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
+# define CONFIG_ENV_OFFSET (892 << 10) /* 892 KiB in */
+# define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */
+#endif /* SPI support */
+
/* Unsupported features */
#undef CONFIG_USE_IRQ
@@ -346,10 +423,12 @@
/* CS0 */
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND
devices */
+#if !defined(CONFIG_SPI_BOOT)
#undef CONFIG_ENV_IS_NOWHERE
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */
#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
#endif
+#endif
#endif /* ! __CONFIG_AM335X_EVM_H */
diff --git a/include/configs/apx4devkit.h b/include/configs/apx4devkit.h
index ab4efa4..3242133 100644
--- a/include/configs/apx4devkit.h
+++ b/include/configs/apx4devkit.h
@@ -182,7 +182,8 @@
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MXS
-#define CONFIG_EHCI_MXS_PORT 1
+#define CONFIG_EHCI_MXS_PORT1
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#define CONFIG_EHCI_IS_TDI
#define CONFIG_USB_STORAGE
#endif
diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h
index bf20065..7352113 100644
--- a/include/configs/at91rm9200ek.h
+++ b/include/configs/at91rm9200ek.h
@@ -75,6 +75,9 @@
#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_OF_LIBFDT
+
/*
* Memory Configuration
*/
diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
index f921fac..ebcc69a 100644
--- a/include/configs/at91sam9260ek.h
+++ b/include/configs/at91sam9260ek.h
@@ -62,6 +62,9 @@
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_OF_LIBFDT
+
/* general purpose I/O */
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
#define CONFIG_AT91_GPIO
@@ -126,6 +129,7 @@
#endif
/* DataFlash */
+#ifndef CONFIG_AT91SAM9G20EK_2MMC
#define CONFIG_ATMEL_DATAFLASH_SPI
#define CONFIG_HAS_DATAFLASH 1
#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
@@ -133,6 +137,7 @@
#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */
#define AT91_SPI_CLK 15000000
+#endif
#ifdef CONFIG_AT91SAM9G20EK
#define DATAFLASH_TCSS (0x22 << 16)
@@ -210,16 +215,16 @@
/* bootstrap + u-boot + env + linux in nandflash */
#define CONFIG_ENV_IS_IN_NAND 1
-#define CONFIG_ENV_OFFSET 0x60000
-#define CONFIG_ENV_OFFSET_REDUND 0x80000
+#define CONFIG_ENV_OFFSET 0xc0000
+#define CONFIG_ENV_OFFSET_REDUND 0x100000
#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
-#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm"
-#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
- "root=/dev/mtdblock5 " \
- "mtdparts=atmel_nand:128k(bootstrap)ro," \
- "256k(uboot)ro,128k(env1)ro," \
- "128k(env2)ro,2M(linux),-(root) " \
- "rw rootfstype=jffs2"
+#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm"
+#define CONFIG_BOOTARGS \
+ "console=ttyS0,115200 earlyprintk " \
+ "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
+ "256k(env),256k(env_redundant),256k(spare)," \
+ "512k(dtb),6M(kernel)ro,-(rootfs) " \
+ "root=/dev/mtdblock7 rw rootfstype=jffs2"
#endif
diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
index 611e3e2..cabff9a 100644
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@@ -212,17 +212,16 @@
/* bootstrap + u-boot + env + linux in nandflash */
#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET 0x60000
-#define CONFIG_ENV_OFFSET_REDUND 0x80000
+#define CONFIG_ENV_OFFSET 0xc0000
+#define CONFIG_ENV_OFFSET_REDUND 0x100000
#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
-#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm"
-#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
- "root=/dev/mtdblock5 " \
- "mtdparts=atmel_nand:128k(bootstrap)ro," \
- "256k(uboot)ro,128k(env1)ro," \
- "128k(env2)ro,2M(linux),-(root) " \
- "rw rootfstype=jffs2"
-
+#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm"
+#define CONFIG_BOOTARGS \
+ "console=ttyS0,115200 earlyprintk " \
+ "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
+ "256k(env),256k(env_redundant),256k(spare)," \
+ "512k(dtb),6M(kernel)ro,-(rootfs) " \
+ "root=/dev/mtdblock7 rw rootfstype=jffs2"
#endif
#define CONFIG_SYS_PROMPT "U-Boot> "
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index 3503822..1ab9c30 100644
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -62,6 +62,9 @@
#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_OF_LIBFDT
+
/*
* Hardware drivers
*/
@@ -324,15 +327,16 @@
/* bootstrap + u-boot + env + linux in nandflash */
#define CONFIG_ENV_IS_IN_NAND 1
-#define CONFIG_ENV_OFFSET 0x60000
-#define CONFIG_ENV_OFFSET_REDUND 0x80000
+#define CONFIG_ENV_OFFSET 0xc0000
+#define CONFIG_ENV_OFFSET_REDUND 0x100000
#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
-#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm"
-#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
- "root=/dev/mtdblock5 " \
- "mtdparts=atmel_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \
- "rw rootfstype=jffs2"
-
+#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm"
+#define CONFIG_BOOTARGS \
+ "console=ttyS0,115200 earlyprintk " \
+ "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
+ "256k(env),256k(env_redundant),256k(spare)," \
+ "512k(dtb),6M(kernel)ro,-(rootfs) " \
+ "root=/dev/mtdblock7 rw rootfstype=jffs2"
#endif
#define CONFIG_SYS_PROMPT "U-Boot> "
diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index e988d81..07e1c9f 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -47,6 +47,7 @@
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_CMD_BOOTZ
#define CONFIG_OF_LIBFDT
/* general purpose I/O */
@@ -149,19 +150,19 @@
/* bootstrap + u-boot + env in nandflash */
#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET 0x60000
-#define CONFIG_ENV_OFFSET_REDUND 0x80000
+#define CONFIG_ENV_OFFSET 0xc0000
+#define CONFIG_ENV_OFFSET_REDUND 0x100000
#define CONFIG_ENV_SIZE 0x20000
-#define CONFIG_BOOTCOMMAND "nand read 0x70000000 0x100000 0x200000;" \
+#define CONFIG_BOOTCOMMAND \
+ "nand read 0x70000000 0x200000 0x300000;" \
"bootm 0x70000000"
#define CONFIG_BOOTARGS \
"console=ttyS0,115200 earlyprintk " \
- "root=/dev/mtdblock5 " \
- "mtdparts=atmel_nand:128k(bootstrap)ro," \
- "256k(uboot)ro,128k(env1)ro,128k(env2)ro," \
- "2M@1M(linux),-(root) " \
- "rw rootfstype=jffs2"
+ "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
+ "256k(env),256k(env_redundant),256k(spare)," \
+ "512k(dtb),6M(kernel)ro,-(rootfs) " \
+ "root=/dev/mtdblock7 rw rootfstype=jffs2"
#define CONFIG_BAUDRATE 115200
diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
index 8178b32..aa359b1 100644
--- a/include/configs/at91sam9rlek.h
+++ b/include/configs/at91sam9rlek.h
@@ -48,6 +48,9 @@
#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_OF_LIBFDT
+
#define CONFIG_ATMEL_LEGACY
#define CONFIG_AT91_GPIO 1
#define CONFIG_AT91_GPIO_PULLUP 1
diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index 6fac5ac..ee6e3fc 100644
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -42,6 +42,7 @@
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_CMD_BOOTZ
#define CONFIG_OF_LIBFDT
/* general purpose I/O */
@@ -231,11 +232,12 @@
"root=/dev/mmcblk0p2 " \
"rw rootfstype=ext4 rootwait"
#else
-#define CONFIG_BOOTARGS "mem=128M console=ttyS0,115200 " \
- "mtdparts=atmel_nand:" \
- "8M(bootstrap/uboot/kernel)ro,-(rootfs) " \
- "root=/dev/mtdblock1 rw " \
- "rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"
+#define CONFIG_BOOTARGS \
+ "console=ttyS0,115200 earlyprintk " \
+ "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
+ "256k(env),256k(env_redundant),256k(spare)," \
+ "512k(dtb),6M(kernel)ro,-(rootfs) " \
+ "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw"
#endif
#define CONFIG_BAUDRATE 115200
diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h
index 1616b39..55dc83d 100644
--- a/include/configs/cardhu.h
+++ b/include/configs/cardhu.h
@@ -47,7 +47,17 @@
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_CMD_I2C
-#define CONFIG_ENV_IS_NOWHERE
+/* SD/MMC */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_TEGRA_MMC
+#define CONFIG_CMD_MMC
+
+/* Environment in eMMC, at the end of 2nd "boot sector" */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET ((512 * 1024) - CONFIG_ENV_SIZE)
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_SYS_MMC_ENV_PART 2
/* SPI */
#define CONFIG_TEGRA_SLINK
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 943b658..8d79ffd 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -331,9 +331,18 @@
#define STATUS_LED_BOOT STATUS_LED_BIT
#define GREEN_LED_GPIO 186 /* CM-T35 Green LED is GPIO186 */
+#define CONFIG_SPLASHIMAGE_GUARD
+
/* GPIO banks */
#ifdef CONFIG_STATUS_LED
#define CONFIG_OMAP3_GPIO_6 /* GPIO186 is in GPIO bank 6 */
#endif
+/* Display Configuration */
+#define CONFIG_OMAP3_GPIO_2
+#define CONFIG_VIDEO_OMAP3
+#define LCD_BPP LCD_COLOR16
+
+#define CONFIG_LCD
+
#endif /* __CONFIG_H */
diff --git a/include/configs/colibri_t20_iris.h b/include/configs/colibri_t20_iris.h
index 0e5f281..856c860 100644
--- a/include/configs/colibri_t20_iris.h
+++ b/include/configs/colibri_t20_iris.h
@@ -40,12 +40,6 @@
#define CONFIG_TEGRA_MMC
#define CONFIG_CMD_MMC
-/* File system support */
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-
/* USB host support */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_TEGRA
diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h
index ce32c80..b1a6e34 100644
--- a/include/configs/dalmore.h
+++ b/include/configs/dalmore.h
@@ -41,6 +41,15 @@
#define CONFIG_MACH_TYPE MACH_TYPE_DALMORE
#define CONFIG_BOARD_EARLY_INIT_F
+
+/* I2C */
+#define CONFIG_TEGRA_I2C
+#define CONFIG_SYS_I2C_INIT_BOARD
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_MAX_I2C_BUS TEGRA_I2C_NUM_CONTROLLERS
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_CMD_I2C
+
#define CONFIG_ENV_IS_NOWHERE
#define MACH_TYPE_DALMORE 4304 /* not yet in mach-types.h */
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
new file mode 100644
index 0000000..10a4939
--- /dev/null
+++ b/include/configs/dra7xx_evm.h
@@ -0,0 +1,36 @@
+/*
+ * (C) Copyright 2013
+ * Texas Instruments Incorporated.
+ * Lokesh Vutla <lokeshvutla@ti.com>
+ *
+ * Configuration settings for the TI DRA7XX board.
+ * See omap5_common.h for omap5 common settings.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_DRA7XX_EVM_H
+#define __CONFIG_DRA7XX_EVM_H
+
+#include <configs/omap5_common.h>
+
+#define CONFIG_DRA7XX /* in a TI DRA7XX core */
+#define CONFIG_SYS_PROMPT "DRA752 EVM # "
+
+#endif /* __CONFIG_DRA7XX_EVM_H */
diff --git a/include/configs/ea20.h b/include/configs/ea20.h
index a8c08e8..90fc7c5 100644
--- a/include/configs/ea20.h
+++ b/include/configs/ea20.h
@@ -42,6 +42,7 @@
#define CONFIG_MACH_DAVINCI_DA850_EVM
#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */
+#define CONFIG_SOC_DA850 /* TI DA850 SoC */
#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID)
#define CONFIG_SYS_OSCIN_FREQ 24000000
#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
diff --git a/include/configs/harmony.h b/include/configs/harmony.h
index 8d1fd47..0c73f86 100644
--- a/include/configs/harmony.h
+++ b/include/configs/harmony.h
@@ -56,14 +56,6 @@
#define CONFIG_TEGRA_MMC
#define CONFIG_CMD_MMC
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
-#define CONFIG_FS_EXT4
-#define CONFIG_FS_FAT
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_FS_GENERIC
-
/* NAND support */
#define CONFIG_CMD_NAND
#define CONFIG_TEGRA_NAND
diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h
index 0e7f924..559e375 100644
--- a/include/configs/igep00x0.h
+++ b/include/configs/igep00x0.h
@@ -36,6 +36,7 @@
#include <asm/arch/cpu.h>
#include <asm/arch/omap3.h>
+#include <asm/mach-types.h>
/*
* Display CPU and Board information
@@ -86,7 +87,10 @@
#define CONFIG_DOS_PARTITION 1
/* define to enable boot progress via leds */
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
+ (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
#define CONFIG_SHOW_BOOT_PROGRESS
+#endif
/* USB */
#define CONFIG_MUSB_UDC 1
@@ -118,7 +122,8 @@
#ifdef CONFIG_BOOT_NAND
#define CONFIG_CMD_NAND
#endif
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
+ (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032)
#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
#endif
#define CONFIG_CMD_DHCP
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index 1b51fe2..f2725cc 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -233,7 +233,9 @@
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MXS
-#define CONFIG_EHCI_MXS_PORT 1
+#define CONFIG_EHCI_MXS_PORT0
+#define CONFIG_EHCI_MXS_PORT1
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_IS_TDI
#define CONFIG_USB_STORAGE
#endif
@@ -244,7 +246,6 @@
#ifdef CONFIG_CMD_SPI
#define CONFIG_HARD_SPI
#define CONFIG_MXS_SPI
-#define CONFIG_MXS_SPI_DMA_ENABLE
#define CONFIG_SPI_HALF_DUPLEX
#define CONFIG_DEFAULT_SPI_BUS 2
#define CONFIG_DEFAULT_SPI_CS 0
diff --git a/include/configs/medcom-wide.h b/include/configs/medcom-wide.h
index bae4ba0..57a50d7 100644
--- a/include/configs/medcom-wide.h
+++ b/include/configs/medcom-wide.h
@@ -66,11 +66,6 @@
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-
#define CONFIG_FIT
#define CONFIG_BOOTCOMMAND \
diff --git a/include/configs/mx23_olinuxino.h b/include/configs/mx23_olinuxino.h
index 7983c5d..03893d7 100644
--- a/include/configs/mx23_olinuxino.h
+++ b/include/configs/mx23_olinuxino.h
@@ -19,6 +19,8 @@
#ifndef __MX23_OLINUXINO_CONFIG_H__
#define __MX23_OLINUXINO_CONFIG_H__
+#include <asm/arch/iomux-mx23.h>
+
/*
* SoC configurations
*/
@@ -53,10 +55,14 @@
#define CONFIG_DOS_PARTITION
#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_CMD_GPIO
+#define CONFIG_CMD_LED
#define CONFIG_CMD_MMC
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_USB
/*
* Memory configurations
@@ -112,6 +118,17 @@
#define CONFIG_BAUDRATE 115200 /* Default baud rate */
/*
+ * Status LED
+ */
+#define CONFIG_STATUS_LED
+#define CONFIG_GPIO_LED
+#define CONFIG_BOARD_SPECIFIC_LED
+#define STATUS_LED_BOOT 0
+#define STATUS_LED_BIT MX23_PAD_SSP1_DETECT__GPIO_2_1
+#define STATUS_LED_STATE STATUS_LED_ON
+#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
+
+/*
* MMC Driver
*/
#ifdef CONFIG_CMD_MMC
@@ -126,6 +143,22 @@
*/
#define CONFIG_APBH_DMA
+/* USB */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MXS
+#define CONFIG_EHCI_MXS_PORT0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_STORAGE
+#endif
+
+/* Ethernet */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+#endif
+
/*
* Boot Linux
*/
@@ -167,6 +200,7 @@
"fdt_file=imx23-olinuxino.dtb\0" \
"fdt_addr=0x41000000\0" \
"boot_fdt=try\0" \
+ "ip_dyn=yes\0" \
"mmcdev=0\0" \
"mmcpart=2\0" \
"mmcroot=/dev/mmcblk0p3 rw rootwait\0" \
@@ -192,6 +226,31 @@
"fi; " \
"else " \
"bootm; " \
+ "fi;\0" \
+ "netargs=setenv bootargs console=${console_mainline},${baudrate} " \
+ "root=/dev/nfs " \
+ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+ "netboot=echo Booting from net ...; " \
+ "usb start; " \
+ "run netargs; " \
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+ "else " \
+ "setenv get_cmd tftp; " \
+ "fi; " \
+ "${get_cmd} ${uimage}; " \
+ "if test ${boot_fdt} = yes; then " \
+ "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+ "bootm ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootm; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi;" \
+ "fi; " \
+ "else " \
+ "bootm; " \
"fi;\0"
#define CONFIG_BOOTCOMMAND \
@@ -201,10 +260,9 @@
"else " \
"if run loaduimage; then " \
"run mmcboot; " \
- "else " \
- "echo ERR: Fail to boot from MMC; " \
+ "else run netboot; " \
"fi; " \
"fi; " \
- "else exit; fi"
+ "else run netboot; fi"
#endif /* __MX23_OLINUXINO_CONFIG_H__ */
diff --git a/include/configs/mx23evk.h b/include/configs/mx23evk.h
index c44a8b8..e5a15a4 100644
--- a/include/configs/mx23evk.h
+++ b/include/configs/mx23evk.h
@@ -33,8 +33,6 @@
#define CONFIG_MACH_TYPE MACH_TYPE_MX23EVK
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_SYS_ICACHE_OFF
-#define CONFIG_SYS_DCACHE_OFF
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_ARCH_MISC_INIT
@@ -60,6 +58,7 @@
#define CONFIG_CMD_FAT
#define CONFIG_CMD_GPIO
#define CONFIG_CMD_MMC
+#define CONFIG_CMD_USB
#define CONFIG_CMD_BOOTZ
/* Memory configurations */
@@ -112,7 +111,6 @@
#define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE }
#define CONFIG_CONS_INDEX 0
#define CONFIG_BAUDRATE 115200 /* Default baud rate */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/* DMA */
#define CONFIG_APBH_DMA
@@ -125,6 +123,16 @@
#define CONFIG_MXS_MMC
#endif
+/* USB */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MXS
+#define CONFIG_EHCI_MXS_PORT0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_STORAGE
+#endif
+
/* Boot Linux */
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h
index 71447d9..0d918a1 100644
--- a/include/configs/mx28evk.h
+++ b/include/configs/mx28evk.h
@@ -181,7 +181,8 @@
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MXS
-#define CONFIG_EHCI_MXS_PORT 1
+#define CONFIG_EHCI_MXS_PORT1
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#define CONFIG_EHCI_IS_TDI
#define CONFIG_USB_STORAGE
#define CONFIG_USB_HOST_ETHER
@@ -202,7 +203,6 @@
#ifdef CONFIG_CMD_SPI
#define CONFIG_HARD_SPI
#define CONFIG_MXS_SPI
-#define CONFIG_MXS_SPI_DMA_ENABLE
#define CONFIG_SPI_HALF_DUPLEX
#define CONFIG_DEFAULT_SPI_BUS 2
#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0
diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h
new file mode 100644
index 0000000..b333937
--- /dev/null
+++ b/include/configs/mx6_common.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __MX6_COMMON_H
+#define __MX6_COMMON_H
+
+#define CONFIG_ARM_ERRATA_743622
+#define CONFIG_ARM_ERRATA_751472
+
+#endif
diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h
index 138e460..bd52cde 100644
--- a/include/configs/mx6qarm2.h
+++ b/include/configs/mx6qarm2.h
@@ -24,6 +24,9 @@
#define CONFIG_MX6
#define CONFIG_MX6Q
+
+#include "mx6_common.h"
+
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
diff --git a/include/configs/mx6qsabre_common.h b/include/configs/mx6qsabre_common.h
index d76357c..9eda9ed 100644
--- a/include/configs/mx6qsabre_common.h
+++ b/include/configs/mx6qsabre_common.h
@@ -19,6 +19,9 @@
#define CONFIG_MX6
#define CONFIG_MX6Q
+
+#include "mx6_common.h"
+
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
@@ -171,6 +174,7 @@
#define CONFIG_SYS_MEMTEST_START 0x10000000
#define CONFIG_SYS_MEMTEST_END 0x10010000
+#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_SYS_HZ 1000
diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
index 752f098..5dc8255 100644
--- a/include/configs/mx6qsabrelite.h
+++ b/include/configs/mx6qsabrelite.h
@@ -24,6 +24,9 @@
#define CONFIG_MX6
#define CONFIG_MX6Q
+
+#include "mx6_common.h"
+
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
@@ -241,6 +244,7 @@
#define CONFIG_SYS_MEMTEST_START 0x10000000
#define CONFIG_SYS_MEMTEST_END 0x10010000
+#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_SYS_HZ 1000
diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
new file mode 100644
index 0000000..93e7fe4
--- /dev/null
+++ b/include/configs/nitrogen6x.h
@@ -0,0 +1,285 @@
+/*
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the Boundary Devices Nitrogen6X
+ * and Freescale i.MX6Q Sabre Lite boards.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_MX6
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define CONFIG_MACH_TYPE 3769
+
+#include <asm/arch/imx-regs.h>
+#include <asm/imx-common/gpio.h>
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_MISC_INIT_R
+#define CONFIG_MXC_GPIO
+
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE UART2_BASE
+
+#define CONFIG_CMD_SF
+#ifdef CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_SST
+#define CONFIG_MXC_SPI
+#define CONFIG_SF_DEFAULT_BUS 0
+#define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(3, 19)<<8))
+#define CONFIG_SF_DEFAULT_SPEED 25000000
+#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
+#endif
+
+/* I2C Configs */
+#define CONFIG_CMD_I2C
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_MXC
+#define CONFIG_SYS_I2C_SPEED 100000
+
+/* OCOTP Configs */
+#define CONFIG_CMD_IMXOTP
+#ifdef CONFIG_CMD_IMXOTP
+#define CONFIG_IMX_OTP
+#define IMX_OTP_BASE OCOTP_BASE_ADDR
+#define IMX_OTP_ADDR_MAX 0x7F
+#define IMX_OTP_DATA_ERROR_VAL 0xBADABADA
+#define IMX_OTPWRITE_ENABLED
+#endif
+
+/* MMC Configs */
+#define CONFIG_FSL_ESDHC
+#define CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+#define CONFIG_SYS_FSL_USDHC_NUM 2
+
+#define CONFIG_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_BOUNCE_BUFFER
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+
+#ifdef CONFIG_MX6Q
+#define CONFIG_CMD_SATA
+#endif
+
+/*
+ * SATA Configs
+ */
+#ifdef CONFIG_CMD_SATA
+#define CONFIG_DWC_AHSATA
+#define CONFIG_SYS_SATA_MAX_DEVICE 1
+#define CONFIG_DWC_AHSATA_PORT_ID 0
+#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
+#define CONFIG_LBA48
+#define CONFIG_LIBATA
+#endif
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define IMX_FEC_BASE ENET_BASE_ADDR
+#define CONFIG_FEC_XCV_TYPE RGMII
+#define CONFIG_ETHPRIME "FEC"
+#define CONFIG_FEC_MXC_PHYADDR 6
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MICREL
+#define CONFIG_PHY_MICREL_KSZ9021
+
+/* USB Configs */
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_FAT
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX6
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_USB_ETHER_SMSC95XX
+#define CONFIG_MXC_USB_PORT 1
+#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS 0
+
+/* Miscellaneous commands */
+#define CONFIG_CMD_BMODE
+#define CONFIG_CMD_SETEXPR
+
+/* Framebuffer and LCD */
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_IPUV3
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_IPUV3_CLK 260000000
+#define CONFIG_CMD_HDMIDETECT
+#define CONFIG_CONSOLE_MUX
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+
+/* Command definition */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_BOOTDELAY 1
+
+#define CONFIG_PREBOOT ""
+
+#define CONFIG_LOADADDR 0x12000000
+#define CONFIG_SYS_TEXT_BASE 0x17800000
+
+#ifdef CONFIG_CMD_SATA
+#define CONFIG_DRIVE_SATA "sata "
+#else
+#define CONFIG_DRIVE_SATA
+#endif
+
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_DRIVE_MMC "mmc "
+#else
+#define CONFIG_DRIVE_MMC
+#endif
+
+#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "console=ttymxc1\0" \
+ "clearenv=if sf probe || sf probe || sf probe 1 ; then " \
+ "sf erase 0xc0000 0x2000 && " \
+ "echo restored environment to factory default ; fi\0" \
+ "bootcmd=for dtype in " CONFIG_DRIVE_TYPES \
+ "; do " \
+ "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
+ "for fs in fat ext2 ; do " \
+ "${fs}load " \
+ "${dtype} ${disk}:1 " \
+ "10008000 " \
+ "/6x_bootscript" \
+ "&& source 10008000 ; " \
+ "done ; " \
+ "done ; " \
+ "done; " \
+ "setenv stdout serial,vga ; " \
+ "echo ; echo 6x_bootscript not found ; " \
+ "echo ; echo serial console at 115200, 8N1 ; echo ; " \
+ "echo details at http://boundarydevices.com/6q_bootscript ; " \
+ "setenv stdout serial\0" \
+ "upgradeu=for dtype in " CONFIG_DRIVE_TYPES \
+ "; do " \
+ "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
+ "for fs in fat ext2 ; do " \
+ "${fs}load ${dtype} ${disk}:1 10008000 " \
+ "/6x_upgrade " \
+ "&& source 10008000 ; " \
+ "done ; " \
+ "done ; " \
+ "done\0" \
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT "U-Boot > "
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE 1024
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_MEMTEST_START 0x10000000
+#define CONFIG_SYS_MEMTEST_END 0x10010000
+#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_CMDLINE_EDITING
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ENV_SIZE (8 * 1024)
+
+/* #define CONFIG_ENV_IS_IN_MMC */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+
+#if defined(CONFIG_ENV_IS_IN_MMC)
+#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
+#define CONFIG_ENV_OFFSET (768 * 1024)
+#define CONFIG_ENV_SECT_SIZE (8 * 1024)
+#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
+#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
+#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
+#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
+#endif
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_CMD_BOOTZ
+
+#define CONFIG_SYS_DCACHE_OFF
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+#define CONFIG_CMD_CACHE
+#endif
+
+#define CONFIG_CMD_BMP
+
+#define CONFIG_CMD_TIME
+#define CONFIG_SYS_ALT_MEMTEST
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/ns9750dev.h b/include/configs/ns9750dev.h
deleted file mode 100644
index 3f49c6f..0000000
--- a/include/configs/ns9750dev.h
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * Copyright (C) 2004 by FS Forth-Systeme GmbH.
- * All rights reserved.
- * Markus Pietrek <mpietrek@fsforth.de>
- *
- * Configuation settings for the NetSilicon NS9750 DevBoard
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
-#define CONFIG_NS9750 1 /* in an NetSilicon NS9750 SoC */
-#define CONFIG_NS9750DEV 1 /* on an NetSilicon NS9750 DevBoard */
-
-/* input clock of PLL */
-#define CONFIG_SYS_CLK_FREQ 324403200 /* Don't use PLL. SW11-4 off */
-
-#define CPU_CLK_FREQ (CONFIG_SYS_CLK_FREQ/2)
-#define AHB_CLK_FREQ (CONFIG_SYS_CLK_FREQ/4)
-#define BBUS_CLK_FREQ (CONFIG_SYS_CLK_FREQ/8)
-
-/*@TODO #define CONFIG_STATUS_LED*/
-#define CONFIG_USE_IRQ
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_NS9750_UART 1 /* use on-chip UART */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_CONS_INDEX 1 /* Port B */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 38400
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_CONSOLE
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_PING
-
-
-#define CONFIG_BOOTDELAY 3
-/*#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600" */
-
-#define CONFIG_ETHADDR 00:04:f3:ff:ff:fb /*@TODO unset */
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 192.168.42.30
-#define CONFIG_SERVERIP 192.168.42.1
-
-/*#define CONFIG_BOOTFILE "elinos-lart" */
-/*#define CONFIG_BOOTCOMMAND "tftp; bootm" */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "NS9750DEV # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00780000 /* 7,5 MB in DRAM */ /* @TODO */
-
-#define CONFIG_SYS_LOAD_ADDR 0x00600000 /* default load address */ /* @TODO */
-
-#define CONFIG_SYS_HZ (CPU_CLK_FREQ/64)
-
-#define NS9750_ETH_PHY_ADDRESS (0x0000)
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-/* TODO */
-#define CONFIG_NR_DRAM_BANKS 2 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x00800000 /* 8 MB */
-#define PHYS_SDRAM_2 0x10000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_2_SIZE 0x00800000 /* 8 MB */
-
-#define PHYS_FLASH_1 0x50000000 /* Flash Bank #1 */
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-/* @TODO*/
-#define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */
-#if 0
-#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */
-#endif
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#ifdef CONFIG_AMD_LV800
-#define PHYS_FLASH_SIZE 0x00100000 /* 1MB */
-#define CONFIG_SYS_MAX_FLASH_SECT (19) /* max number of sectors on one chip */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x0F0000) /* addr of environment */
-#endif
-#ifdef CONFIG_AMD_LV400
-#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */
-#define CONFIG_SYS_MAX_FLASH_SECT (11) /* max number of sectors on one chip */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x070000) /* addr of environment */
-#endif
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-/* @TODO */
-/*#define CONFIG_ENV_IS_IN_FLASH 1*/
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */
-
-#ifdef CONFIG_STATUS_LED
-
-extern void __led_init(led_id_t mask, int state);
-extern void __led_toggle(led_id_t mask);
-extern void __led_set(led_id_t mask, int state);
-
-#endif /* CONFIG_STATUS_LED */
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 59255c4..48ce4c0 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -53,7 +53,8 @@
#define CONFIG_MISC_INIT_R
-#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_LIBFDT
+#define CONFIG_CMD_BOOTZ
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h
index 07de565..376a3d0 100644
--- a/include/configs/omap3_mvblx.h
+++ b/include/configs/omap3_mvblx.h
@@ -90,9 +90,9 @@
/*
* select serial console configuration
*/
-#define CONFIG_CONS_INDEX 3
-#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
-#define CONFIG_SERIAL3 3 /* UART3 */
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1
+#define CONFIG_SERIAL1 1 /* UART1 */
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
@@ -102,6 +102,10 @@
#define CONFIG_OMAP_HSMMC 1
#define CONFIG_DOS_PARTITION 1
+/* silent console by default */
+#define CONFIG_SYS_DEVICE_NULLDEV 1
+#define CONFIG_SILENT_CONSOLE 1
+
/* USB */
#define CONFIG_MUSB_UDC 1
#define CONFIG_USB_OMAP3 1
@@ -152,19 +156,23 @@
/* Environment information */
#undef CONFIG_ENV_OVERWRITE /* disallow overwriting serial# and ethaddr */
-#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTDELAY 0
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_STOP_STR "S"
#define CONFIG_EXTRA_ENV_SETTINGS \
+ "silent=true\0" \
"loadaddr=0x82000000\0" \
"usbtty=cdc_acm\0" \
- "console=ttyO2,115200n8\0" \
+ "console=ttyO0,115200n8\0" \
"mpurate=600\0" \
"vram=12M\0" \
"dvimode=1024x768-24@60\0" \
"defaultdisplay=dvi\0" \
- "fpgafilename=mvbluelynx_x.rbf\0" \
- "loadfpga=if fatload mmc ${mmcdev} ${loadaddr} ${fpgafilename}; then " \
- "fpga load 0 ${loadaddr} ${filesize}; " \
+ "loadfpga=if ext2load mmc ${mmcdev}:2 ${loadaddr} "\
+ "/lib/firmware/mvblx/${fpgafilename}; then " \
+ "fpga load 0 ${loadaddr} ${filesize}; " \
"fi;\0" \
"mmcdev=0\0" \
"mmcroot=/dev/mmcblk0p2 rw\0" \
@@ -177,6 +185,7 @@
"omapdss.def_disp=${defaultdisplay} " \
"root=${mmcroot} " \
"rootfstype=${mmcrootfstype} " \
+ "mvfw.fpgavers=${fpgavers} " \
"${cmdline_suffix}\0" \
"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
"importbootenv=echo Importing environment from mmc ...; " \
diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
index 180cb24..6ae6a0f 100644
--- a/include/configs/omap4_common.h
+++ b/include/configs/omap4_common.h
@@ -52,7 +52,7 @@
#define CONFIG_MISC_INIT_R
#define CONFIG_OF_LIBFDT 1
-
+#define CONFIG_CMD_BOOTZ
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
diff --git a/include/configs/omap5_common.h b/include/configs/omap5_common.h
new file mode 100644
index 0000000..af97564
--- /dev/null
+++ b/include/configs/omap5_common.h
@@ -0,0 +1,262 @@
+/*
+ * (C) Copyright 2013
+ * Texas Instruments Incorporated.
+ * Sricharan R <r.sricharan@ti.com>
+ *
+ * Derived from OMAP4 done by:
+ * Aneesh V <aneesh@ti.com>
+ *
+ * TI OMAP5 AND DRA7XX common configuration settings
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_OMAP5_COMMON_H
+#define __CONFIG_OMAP5_COMMON_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_OMAP /* in a TI OMAP core */
+#define CONFIG_OMAP54XX /* which is a 54XX */
+#define CONFIG_OMAP_GPIO
+
+/* Get CPU defs */
+#include <asm/arch/cpu.h>
+#include <asm/arch/omap.h>
+
+/* Display CPU and Board Info */
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Clock Defines */
+#define V_OSCK 19200000 /* Clock output from T2 */
+#define V_SCLK V_OSCK
+
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_CMD_BOOTZ
+
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+
+/*
+ * Size of malloc() pool
+ * Total Size Environment - 128k
+ * Malloc - add 256k
+ */
+#define CONFIG_ENV_SIZE (128 << 10)
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (256 << 10))
+/* Vector Base */
+#define CONFIG_SYS_CA9_VECTOR_BASE SRAM_ROM_VECT_BASE
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * serial port - NS16550 compatible
+ */
+#define V_NS16550_CLK 48000000
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
+#define CONFIG_CONS_INDEX 3
+#define CONFIG_SYS_NS16550_COM3 UART3_BASE
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
+ 115200}
+/* I2C */
+#define CONFIG_HARD_I2C
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C_SLAVE 1
+#define CONFIG_DRIVER_OMAP34XX_I2C
+#define CONFIG_I2C_MULTI_BUS
+
+
+/* MMC */
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_OMAP_HSMMC
+#define CONFIG_DOS_PARTITION
+
+/* MMC ENV related defines */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */
+#define CONFIG_ENV_OFFSET 0xE0000
+#define CONFIG_CMD_SAVEENV
+
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+/* Flash */
+#define CONFIG_SYS_NO_FLASH
+
+/* Cache */
+#define CONFIG_SYS_CACHELINE_SIZE 64
+#define CONFIG_SYS_CACHELINE_SHIFT 6
+
+/* commands to include */
+#include <config_cmd_default.h>
+
+/* Enabled commands */
+#define CONFIG_CMD_EXT2 /* EXT2 Support */
+#define CONFIG_CMD_FAT /* FAT support */
+#define CONFIG_CMD_I2C /* I2C serial bus support */
+#define CONFIG_CMD_MMC /* MMC support */
+#define CONFIG_CMD_SAVEENV
+
+/* Disabled commands */
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
+#undef CONFIG_CMD_IMLS /* List all found images */
+
+/*
+ * Environment setup
+ */
+
+#define CONFIG_BOOTDELAY 3
+
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "loadaddr=0x82000000\0" \
+ "console=ttyO2,115200n8\0" \
+ "usbtty=cdc_acm\0" \
+ "vram=16M\0" \
+ "mmcdev=0\0" \
+ "mmcroot=/dev/mmcblk0p2 rw\0" \
+ "mmcrootfstype=ext3 rootwait\0" \
+ "mmcargs=setenv bootargs console=${console} " \
+ "vram=${vram} " \
+ "root=${mmcroot} " \
+ "rootfstype=${mmcrootfstype}\0" \
+ "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+ "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
+ "source ${loadaddr}\0" \
+ "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
+ "mmcboot=echo Booting from mmc${mmcdev} ...; " \
+ "run mmcargs; " \
+ "bootm ${loadaddr}\0" \
+
+#define CONFIG_BOOTCOMMAND \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loaduimage; then " \
+ "run mmcboot; " \
+ "fi; " \
+ "fi; " \
+ "fi"
+
+#define CONFIG_AUTO_COMPLETE 1
+
+/*
+ * Miscellaneous configurable options
+ */
+
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_CBSIZE 256
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
+
+/*
+ * memtest setup
+ */
+#define CONFIG_SYS_MEMTEST_START 0x80000000
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (32 << 20))
+
+/* Default load address */
+#define CONFIG_SYS_LOAD_ADDR 0x80000000
+
+/* Use General purpose timer 1 */
+#define CONFIG_SYS_TIMERBASE GPT2_BASE
+#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ 1000
+
+/*
+ * SDRAM Memory Map
+ * Even though we use two CS all the memory
+ * is mapped to one contiguous block
+ */
+#define CONFIG_NR_DRAM_BANKS 1
+
+#define CONFIG_SYS_SDRAM_BASE 0x80000000
+#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
+ GENERATED_GBL_DATA_SIZE)
+
+#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+
+/* Defines for SDRAM init */
+#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
+#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
+#endif
+
+/* Defines for SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE 0x40300350
+#define CONFIG_SPL_MAX_SIZE 0x19000 /* 100K */
+#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
+#define CONFIG_SPL_DISPLAY_PRINT
+
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+
+/*
+ * 64 bytes before this address should be set aside for u-boot.img's
+ * header. That is 80E7FFC0--0x80E80000 should not be used for any
+ * other needs.
+ */
+#define CONFIG_SYS_TEXT_BASE 0x80E80000
+
+/*
+ * BSS and malloc area 64MB into memory to allow enough
+ * space for the kernel at the beginning of memory
+ */
+#define CONFIG_SPL_BSS_START_ADDR 0x84000000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */
+#define CONFIG_SYS_SPL_MALLOC_START 0x84100000
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */
+#define CONFIG_SPL_GPIO_SUPPORT
+
+#endif /* __CONFIG_OMAP5_COMMON_H */
diff --git a/include/configs/omap5_evm.h b/include/configs/omap5_evm.h
index 623da77..22a8e13 100644
--- a/include/configs/omap5_evm.h
+++ b/include/configs/omap5_evm.h
@@ -1,12 +1,10 @@
/*
- * (C) Copyright 2010
+ * (C) Copyright 2013
* Texas Instruments Incorporated.
* Sricharan R <r.sricharan@ti.com>
*
- * Derived from OMAP4 done by:
- * Aneesh V <aneesh@ti.com>
- *
* Configuration settings for the TI EVM5430 board.
+ * See omap5_common.h for omap5 common settings.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -27,242 +25,16 @@
* MA 02111-1307 USA
*/
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_ARMV7 /* This is an ARM V7 CPU core */
-#define CONFIG_OMAP /* in a TI OMAP core */
-#define CONFIG_OMAP54XX /* which is a 54XX */
-#define CONFIG_OMAP5430 /* which is in a 5430 */
-#define CONFIG_5430EVM /* working with EVM */
-#define CONFIG_OMAP_GPIO
-
-/* Get CPU defs */
-#include <asm/arch/cpu.h>
-#include <asm/arch/omap.h>
-
-/* Display CPU and Board Info */
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
-/* Clock Defines */
-#define V_OSCK 19200000 /* Clock output from T2 */
-#define V_SCLK V_OSCK
-
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_OF_LIBFDT
-
-#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-/*
- * Size of malloc() pool
- * Total Size Environment - 128k
- * Malloc - add 256k
- */
-#define CONFIG_ENV_SIZE (128 << 10)
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (256 << 10))
-/* Vector Base */
-#define CONFIG_SYS_CA9_VECTOR_BASE SRAM_ROM_VECT_BASE
-
-/*
- * Hardware drivers
- */
-
-/*
- * serial port - NS16550 compatible
- */
-#define V_NS16550_CLK 48000000
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
-#define CONFIG_CONS_INDEX 3
-#define CONFIG_SYS_NS16550_COM3 UART3_BASE
+#ifndef __CONFIG_OMAP5_EVM_H
+#define __CONFIG_OMAP5_EVM_H
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
- 115200}
-/* I2C */
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP34XX_I2C
-#define CONFIG_I2C_MULTI_BUS
+#include <configs/omap5_common.h>
/* TWL6035 */
#ifndef CONFIG_SPL_BUILD
#define CONFIG_TWL6035_POWER
#endif
-/* MMC */
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MMC
-#define CONFIG_OMAP_HSMMC
-#define CONFIG_DOS_PARTITION
-
-/* MMC ENV related defines */
-#define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */
-#define CONFIG_ENV_OFFSET 0xE0000
-#define CONFIG_CMD_SAVEENV
-
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-
-/* Flash */
-#define CONFIG_SYS_NO_FLASH
-
-/* Cache */
-#define CONFIG_SYS_CACHELINE_SIZE 64
-#define CONFIG_SYS_CACHELINE_SHIFT 6
-
-/* commands to include */
-#include <config_cmd_default.h>
-
-/* Enabled commands */
-#define CONFIG_CMD_EXT2 /* EXT2 Support */
-#define CONFIG_CMD_FAT /* FAT support */
-#define CONFIG_CMD_I2C /* I2C serial bus support */
-#define CONFIG_CMD_MMC /* MMC support */
-#define CONFIG_CMD_SAVEENV
-
-/* Disabled commands */
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
-#undef CONFIG_CMD_IMLS /* List all found images */
-
-/*
- * Environment setup
- */
-
-#define CONFIG_BOOTDELAY 3
-
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "loadaddr=0x82000000\0" \
- "console=ttyO2,115200n8\0" \
- "usbtty=cdc_acm\0" \
- "vram=16M\0" \
- "mmcdev=0\0" \
- "mmcroot=/dev/mmcblk0p2 rw\0" \
- "mmcrootfstype=ext3 rootwait\0" \
- "mmcargs=setenv bootargs console=${console} " \
- "vram=${vram} " \
- "root=${mmcroot} " \
- "rootfstype=${mmcrootfstype}\0" \
- "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
- "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
- "source ${loadaddr}\0" \
- "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
- "mmcboot=echo Booting from mmc${mmcdev} ...; " \
- "run mmcargs; " \
- "bootm ${loadaddr}\0" \
-
-#define CONFIG_BOOTCOMMAND \
- "mmc dev ${mmcdev}; if mmc rescan; then " \
- "if run loadbootscript; then " \
- "run bootscript; " \
- "else " \
- "if run loaduimage; then " \
- "run mmcboot; " \
- "fi; " \
- "fi; " \
- "fi"
-
-#define CONFIG_AUTO_COMPLETE 1
-
-/*
- * Miscellaneous configurable options
- */
-
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
#define CONFIG_SYS_PROMPT "OMAP5430 EVM # "
-#define CONFIG_SYS_CBSIZE 256
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
-
-/*
- * memtest setup
- */
-#define CONFIG_SYS_MEMTEST_START 0x80000000
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (32 << 20))
-
-/* Default load address */
-#define CONFIG_SYS_LOAD_ADDR 0x80000000
-
-/* Use General purpose timer 1 */
-#define CONFIG_SYS_TIMERBASE GPT2_BASE
-#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ 1000
-
-/*
- * SDRAM Memory Map
- * Even though we use two CS all the memory
- * is mapped to one contiguous block
- */
-#define CONFIG_NR_DRAM_BANKS 1
-
-#define CONFIG_SYS_SDRAM_BASE 0x80000000
-#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
- GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-
-/* Defines for SDRAM init */
-#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
-#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
-#endif
-
-/* Defines for SPL */
-#define CONFIG_SPL
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_TEXT_BASE 0x40300350
-#define CONFIG_SPL_MAX_SIZE 0x19000 /* 100K */
-#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
-#define CONFIG_SPL_DISPLAY_PRINT
-
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
-
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
-
-/*
- * 64 bytes before this address should be set aside for u-boot.img's
- * header. That is 80E7FFC0--0x80E80000 should not be used for any
- * other needs.
- */
-#define CONFIG_SYS_TEXT_BASE 0x80E80000
-
-/*
- * BSS and malloc area 64MB into memory to allow enough
- * space for the kernel at the beginning of memory
- */
-#define CONFIG_SPL_BSS_START_ADDR 0x84000000
-#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */
-#define CONFIG_SYS_SPL_MALLOC_START 0x84100000
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */
-#endif /* __CONFIG_H */
+#endif /* __CONFIG_OMAP5_EVM_H */
diff --git a/include/configs/paz00.h b/include/configs/paz00.h
index 2edb4aa..eac1ef9 100644
--- a/include/configs/paz00.h
+++ b/include/configs/paz00.h
@@ -44,14 +44,6 @@
#define CONFIG_TEGRA_MMC
#define CONFIG_CMD_MMC
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
-#define CONFIG_FS_EXT4
-#define CONFIG_FS_FAT
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_FS_GENERIC
-
/* Environment in eMMC, at the end of 2nd "boot sector" */
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET ((1024 * 1024) - CONFIG_ENV_SIZE)
diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h
index aa90ba9..63ab123 100644
--- a/include/configs/pcm051.h
+++ b/include/configs/pcm051.h
@@ -234,7 +234,7 @@
#define CONFIG_SPL_SPI_CS 0
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
/*
* 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
diff --git a/include/configs/plutux.h b/include/configs/plutux.h
index deee237..4cfe88a 100644
--- a/include/configs/plutux.h
+++ b/include/configs/plutux.h
@@ -65,11 +65,6 @@
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-
#define CONFIG_FIT
#define CONFIG_BOOTCOMMAND \
diff --git a/include/configs/sc_sps_1.h b/include/configs/sc_sps_1.h
index decf8d9..349497f 100644
--- a/include/configs/sc_sps_1.h
+++ b/include/configs/sc_sps_1.h
@@ -170,7 +170,8 @@
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MXS
-#define CONFIG_EHCI_MXS_PORT 0
+#define CONFIG_EHCI_MXS_PORT0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#define CONFIG_EHCI_IS_TDI
#define CONFIG_USB_STORAGE
#endif
diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h
index de0c777..f66173e 100644
--- a/include/configs/seaboard.h
+++ b/include/configs/seaboard.h
@@ -70,14 +70,6 @@
#define CONFIG_TEGRA_MMC
#define CONFIG_CMD_MMC
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
-#define CONFIG_FS_EXT4
-#define CONFIG_FS_FAT
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_FS_GENERIC
-
/* Environment in eMMC, at the end of 2nd "boot sector" */
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET ((512 * 1024) - CONFIG_ENV_SIZE)
diff --git a/include/configs/tec.h b/include/configs/tec.h
index caeb9cd..f90f5c7 100644
--- a/include/configs/tec.h
+++ b/include/configs/tec.h
@@ -73,11 +73,6 @@
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-
#define CONFIG_FIT
#define CONFIG_BOOTCOMMAND \
diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h
index 88acccf..036ded0 100644
--- a/include/configs/tegra-common.h
+++ b/include/configs/tegra-common.h
@@ -21,8 +21,8 @@
* MA 02111-1307 USA
*/
-#ifndef __TEGRA_COMMON_H
-#define __TEGRA_COMMON_H
+#ifndef _TEGRA_COMMON_H_
+#define _TEGRA_COMMON_H_
#include <asm/sizes.h>
#include <linux/stringify.h>
@@ -56,10 +56,8 @@
#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MB */
/*
- * PllX Configuration
+ * NS16550 Configuration
*/
-#define CONFIG_SYS_CPU_OSC_FREQUENCY 1000000 /* Set CPU clock to 1GHz */
-
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
@@ -90,6 +88,18 @@
#define CONFIG_COMMAND_HISTORY
#define CONFIG_AUTO_COMPLETE
+/* turn on commonly used storage-related commands */
+
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_FS_EXT4
+#define CONFIG_FS_FAT
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_FS_GENERIC
+#define CONFIG_CMD_PART
+
#define CONFIG_SYS_NO_FLASH
#define CONFIG_CONSOLE_MUX
@@ -158,5 +168,7 @@
#define CONFIG_SPL_GPIO_SUPPORT
#define CONFIG_SYS_GENERIC_BOARD
+/* Misc utility code */
+#define CONFIG_BOUNCE_BUFFER
#endif /* _TEGRA_COMMON_H_ */
diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h
index 0033530..c2986d8 100644
--- a/include/configs/tegra114-common.h
+++ b/include/configs/tegra114-common.h
@@ -76,4 +76,7 @@
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra114/u-boot-spl.lds"
+/* Total I2C ports on Tegra114 */
+#define TEGRA_I2C_NUM_CONTROLLERS 5
+
#endif /* _TEGRA114_COMMON_H_ */
diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h
index 33e5f52..e464e06 100644
--- a/include/configs/tegra20-common.h
+++ b/include/configs/tegra20-common.h
@@ -26,6 +26,12 @@
#include "tegra-common.h"
/*
+ * Errata configuration
+ */
+#define CONFIG_ARM_ERRATA_742230
+#define CONFIG_ARM_ERRATA_751472
+
+/*
* NS16550 Configuration
*/
#define V_NS16550_CLK 216000000 /* 216MHz (pllp_out0) */
@@ -108,13 +114,7 @@
/* Total I2C ports on Tegra20 */
#define TEGRA_I2C_NUM_CONTROLLERS 4
-#define CONFIG_PARTITION_UUIDS
-#define CONFIG_CMD_PART
-
#define CONFIG_SYS_NAND_SELF_INIT
#define CONFIG_SYS_NAND_ONFI_DETECTION
-/* Misc utility code */
-#define CONFIG_BOUNCE_BUFFER
-
#endif /* _TEGRA20_COMMON_H_ */
diff --git a/include/configs/tegra30-common.h b/include/configs/tegra30-common.h
index 04517e1..f6c07c6 100644
--- a/include/configs/tegra30-common.h
+++ b/include/configs/tegra30-common.h
@@ -26,6 +26,12 @@
#include "tegra-common.h"
/*
+ * Errata configuration
+ */
+#define CONFIG_ARM_ERRATA_743622
+#define CONFIG_ARM_ERRATA_751472
+
+/*
* NS16550 Configuration
*/
#define V_NS16550_CLK 408000000 /* 408MHz (pllp_out0) */
diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h
index 334d3a3..0644f7a 100644
--- a/include/configs/trimslice.h
+++ b/include/configs/trimslice.h
@@ -67,14 +67,6 @@
#define CONFIG_TEGRA_MMC
#define CONFIG_CMD_MMC
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
-#define CONFIG_FS_EXT4
-#define CONFIG_FS_FAT
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_FS_GENERIC
-
/* Environment in SPI */
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SPI_MAX_HZ 48000000
diff --git a/include/configs/ventana.h b/include/configs/ventana.h
index b55ebc9..5755f11 100644
--- a/include/configs/ventana.h
+++ b/include/configs/ventana.h
@@ -50,14 +50,6 @@
#define CONFIG_TEGRA_MMC
#define CONFIG_CMD_MMC
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
-#define CONFIG_FS_EXT4
-#define CONFIG_FS_FAT
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_FS_GENERIC
-
/* Environment in eMMC, at the end of 2nd "boot sector" */
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET ((1024 * 1024) - CONFIG_ENV_SIZE)
diff --git a/include/configs/whistler.h b/include/configs/whistler.h
index 1e554d8..9542c7e 100644
--- a/include/configs/whistler.h
+++ b/include/configs/whistler.h
@@ -59,14 +59,6 @@
#define CONFIG_TEGRA_MMC
#define CONFIG_CMD_MMC
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
-#define CONFIG_FS_EXT4
-#define CONFIG_FS_FAT
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_FS_GENERIC
-
/*
* Environment in eMMC, at the end of 2nd "boot sector". Note: This assumes
* the user plugged the standard 8MB MoviNAND card into J29/HSMMC/POP. If
diff --git a/include/configs/zynq.h b/include/configs/zynq.h
index 18fd76f..2989e72 100644
--- a/include/configs/zynq.h
+++ b/include/configs/zynq.h
@@ -58,6 +58,11 @@
#define CONFIG_ZYNQ_GEM
#define CONFIG_ZYNQ_GEM_BASEADDR0 0xE000B000
+#if defined(CONFIG_ZYNQ_DCC)
+# define CONFIG_ARM_DCC
+# define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */
+#endif
+
#define CONFIG_BOOTP_SERVERIP
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
diff --git a/include/env_callback.h b/include/env_callback.h
index c583120..e89b6da 100644
--- a/include/env_callback.h
+++ b/include/env_callback.h
@@ -41,6 +41,12 @@
#define SILENT_CALLBACK
#endif
+#ifdef CONFIG_SPLASHIMAGE_GUARD
+#define SPLASHIMAGE_CALLBACK "splashimage:splashimage,"
+#else
+#define SPLASHIMAGE_CALLBACK
+#endif
+
/*
* This list of callback bindings is static, but may be overridden by defining
* a new association in the ".callbacks" environment variable.
@@ -51,6 +57,7 @@
"bootfile:bootfile," \
"loadaddr:loadaddr," \
SILENT_CALLBACK \
+ SPLASHIMAGE_CALLBACK \
"stdin:console,stdout:console,stderr:console," \
CONFIG_ENV_CALLBACK_LIST_STATIC
@@ -76,7 +83,7 @@ void env_callback_init(ENTRY *var_entry);
}
#else
#define U_BOOT_ENV_CALLBACK(name, callback) \
- ll_entry_declare(struct env_clbk_tbl, name, env_clbk, env_clbk) = \
+ ll_entry_declare(struct env_clbk_tbl, name, env_clbk) = \
{#name, callback}
#endif
diff --git a/include/fdtdec.h b/include/fdtdec.h
index 77f244f..2189483 100644
--- a/include/fdtdec.h
+++ b/include/fdtdec.h
@@ -62,6 +62,7 @@ struct fdt_memory {
enum fdt_compat_id {
COMPAT_UNKNOWN,
COMPAT_NVIDIA_TEGRA20_USB, /* Tegra20 USB port */
+ COMPAT_NVIDIA_TEGRA114_I2C, /* Tegra114 I2C w/single clock source */
COMPAT_NVIDIA_TEGRA20_I2C, /* Tegra20 i2c */
COMPAT_NVIDIA_TEGRA20_DVC, /* Tegra20 dvc (really just i2c) */
COMPAT_NVIDIA_TEGRA20_EMC, /* Tegra20 memory controller */
@@ -70,6 +71,8 @@ enum fdt_compat_id {
COMPAT_NVIDIA_TEGRA20_NAND, /* Tegra2 NAND controller */
COMPAT_NVIDIA_TEGRA20_PWM, /* Tegra 2 PWM controller */
COMPAT_NVIDIA_TEGRA20_DC, /* Tegra 2 Display controller */
+ COMPAT_NVIDIA_TEGRA30_SDMMC, /* Tegra30 SDMMC controller */
+ COMPAT_NVIDIA_TEGRA20_SDMMC, /* Tegra20 SDMMC controller */
COMPAT_NVIDIA_TEGRA20_SFLASH, /* Tegra 2 SPI flash controller */
COMPAT_NVIDIA_TEGRA20_SLINK, /* Tegra 2 SPI SLINK controller */
COMPAT_SMSC_LAN9215, /* SMSC 10/100 Ethernet LAN9215 */
diff --git a/include/lcd.h b/include/lcd.h
index c24164a..4ac4ddd 100644
--- a/include/lcd.h
+++ b/include/lcd.h
@@ -47,6 +47,7 @@ extern struct vidinfo panel_info;
extern void lcd_ctrl_init (void *lcdbase);
extern void lcd_enable (void);
+extern int board_splash_screen_prepare(void);
/* setcolreg used in 8bpp/16bpp; initcolregs used in monochrome */
extern void lcd_setcolreg (ushort regno,
diff --git a/include/linker_lists.h b/include/linker_lists.h
index 0b405d7..6c28bf9 100644
--- a/include/linker_lists.h
+++ b/include/linker_lists.h
@@ -13,6 +13,96 @@
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*/
+
+/*
+ * There is no use in including this from ASM files, but that happens
+ * anyway, e.g. PPC kgdb.S includes command.h which incluse us.
+ * So just don't define anything when included from ASM.
+ */
+
+#if !defined(__ASSEMBLY__)
+
+/**
+ * A linker list is constructed by grouping together linker input
+ * sections, each containning one entry of the list. Each input section
+ * contains a constant initialized variable which holds the entry's
+ * content. Linker list input sections are constructed from the list
+ * and entry names, plus a prefix which allows grouping all lists
+ * together. Assuming _list and _entry are the list and entry names,
+ * then the corresponding input section name is
+ *
+ * _u_boot_list + _2_ + @_list + _2_ + @_entry
+ *
+ * and the C variable name is
+ *
+ * .u_boot_list_ + 2_ + @_list + _2_ + @_entry
+ *
+ * This ensures uniqueness for both input section and C variable name.
+ *
+ * Note that the names differ only in the first character, "." for the
+ * setion and "_" for the variable, so that the linker cannot confuse
+ * section and symbol names. From now on, both names will be referred
+ * to as
+ *
+ * %u_boot_list_ + 2_ + @_list + _2_ + @_entry
+ *
+ * Entry variables need never be referred to directly.
+ *
+ * The naming scheme for input sections allows grouping all linker lists
+ * into a single linker output section and grouping all entries for a
+ * single list.
+ *
+ * Note the two '_2_' constant components in the names: their presence
+ * allows putting a start and end symbols around a list, by mapping
+ * these symbols to sections names with components "1" (before) and
+ * "3" (after) instead of "2" (within).
+ * Start and end symbols for a list can generally be defined as
+ *
+ * %u_boot_list_2_ + @_list + _1_...
+ * %u_boot_list_2_ + @_list + _3_...
+ *
+ * Start and end symbols for the whole of the linker lists area can be
+ * defined as
+ *
+ * %u_boot_list_1_...
+ * %u_boot_list_3_...
+ *
+ * Here is an example of the sorted sections which result from a list
+ * "array" made up of three entries : "first", "second" and "third",
+ * iterated at least once.
+ *
+ * .u_boot_list_2_array_1
+ * .u_boot_list_2_array_2_first
+ * .u_boot_list_2_array_2_second
+ * .u_boot_list_2_array_2_third
+ * .u_boot_list_2_array_3
+ *
+ * If lists must be divided into sublists (e.g. for iterating only on
+ * part of a list), one can simply give the list a name of the form
+ * 'outer_2_inner', where 'outer' is the global list name and 'inner'
+ * is the sub-list name. Iterators for the whole list should use the
+ * global list name ("outer"); iterators for only a sub-list should use
+ * the full sub-list name ("outer_2_inner").
+ *
+ * Here is an example of the sections generated from a global list
+ * named "drivers", two sub-lists named "i2c" and "pci", and iterators
+ * defined for the whole list and each sub-list:
+ *
+ * %u_boot_list_2_drivers_1
+ * %u_boot_list_2_drivers_2_i2c_1
+ * %u_boot_list_2_drivers_2_i2c_2_first
+ * %u_boot_list_2_drivers_2_i2c_2_first
+ * %u_boot_list_2_drivers_2_i2c_2_second
+ * %u_boot_list_2_drivers_2_i2c_2_third
+ * %u_boot_list_2_drivers_2_i2c_3
+ * %u_boot_list_2_drivers_2_pci_1
+ * %u_boot_list_2_drivers_2_pci_2_first
+ * %u_boot_list_2_drivers_2_pci_2_second
+ * %u_boot_list_2_drivers_2_pci_2_third
+ * %u_boot_list_2_drivers_2_pci_3
+ * %u_boot_list_2_drivers_3
+ */
+
#ifndef __LINKER_LISTS_H__
#define __LINKER_LISTS_H__
@@ -20,43 +110,28 @@
* ll_entry_declare() - Declare linker-generated array entry
* @_type: Data type of the entry
* @_name: Name of the entry
- * @_section_u: Subsection of u_boot_list in which this entry is placed
- * (with underscores instead of dots, for name concatenation)
- * @_section_d: Subsection of u_boot_list in which this entry is placed
- * (with dots, for section concatenation)
+ * @_list: name of the list. Should contain only characters allowed
+ * in a C variable name!
*
* This macro declares a variable that is placed into a linker-generated
* array. This is a basic building block for more advanced use of linker-
* generated arrays. The user is expected to build their own macro wrapper
* around this one.
*
- * A variable declared using this macro must be compile-time initialized
- * and is as such placed into subsection of special section, .u_boot_list.
- * The subsection is specified by the _section_[u,d] parameter, see below.
- * The base name of the variable is _name, yet the actual variable is
- * declared as concatenation of
- *
- * %_u_boot_list_ + @_section_u + _ + @_name
- *
- * which ensures name uniqueness. This variable shall never be refered
- * directly though.
+ * A variable declared using this macro must be compile-time initialized.
*
* Special precaution must be made when using this macro:
- * 1) The _type must not contain the "static" keyword, otherwise the entry
- * is not generated.
*
- * 2) The @_section_u and @_section_d variables must match, the only difference
- * is that in @_section_u is every dot "." character present in @_section_d
- * replaced by a single underscore "_" character in @_section_u. The actual
- * purpose of these parameters is to select proper subsection in the global
- * .u_boot_list section.
+ * 1) The _type must not contain the "static" keyword, otherwise the
+ * entry is generated and can be iterated but is listed in the map
+ * file and cannot be retrieved by name.
*
- * 3) In case a section is declared that contains some array elements AND a
- * subsection of this section is declared and contains some elements, it is
- * imperative that the elements are of the same type.
+ * 2) In case a section is declared that contains some array elements AND
+ * a subsection of this section is declared and contains some elements,
+ * it is imperative that the elements are of the same type.
*
* 4) In case an outer section is declared that contains some array elements
- * AND am inner subsection of this section is declared and contains some
+ * AND an inner subsection of this section is declared and contains some
* elements, then when traversing the outer section, even the elements of
* the inner sections are present in the array.
*
@@ -66,39 +141,71 @@
* .y = 4,
* };
*/
-#define ll_entry_declare(_type, _name, _section_u, _section_d) \
- _type _u_boot_list_##_section_u##_##_name __attribute__(( \
- unused, aligned(4), \
- section(".u_boot_list."#_section_d"."#_name)))
+#define ll_entry_declare(_type, _name, _list) \
+ _type _u_boot_list_2_##_list##_2_##_name __aligned(4) \
+ __attribute__((unused, \
+ section(".u_boot_list_2_"#_list"_2_"#_name)))
+
+/**
+ * We need a 0-byte-size type for iterator symbols, and the compiler
+ * does not allow defining objects of C type 'void'. Using an empty
+ * struct is allowed by the compiler, but causes gcc versions 4.4 and
+ * below to complain about aliasing. Therefore we use the next best
+ * thing: zero-sized arrays, which are both 0-byte-size and exempt from
+ * aliasing warnings.
+ */
/**
* ll_entry_start() - Point to first entry of linker-generated array
* @_type: Data type of the entry
- * @_section_u: Subsection of u_boot_list in which this entry is placed
- * (with underscores instead of dots)
+ * @_list: Name of the list in which this entry is placed
*
* This function returns (_type *) pointer to the very first entry of a
* linker-generated array placed into subsection of .u_boot_list section
- * specified by _section_u argument.
+ * specified by _list argument.
+ *
+ * Since this macro defines an array start symbol, its leftmost index
+ * must be 2 and its rightmost index must be 1.
*
* Example:
* struct my_sub_cmd *msc = ll_entry_start(struct my_sub_cmd, cmd_sub);
*/
-#define ll_entry_start(_type, _section_u) \
- ({ \
- extern _type _u_boot_list_##_section_u##__start; \
- _type *_ll_result = &_u_boot_list_##_section_u##__start;\
- _ll_result; \
- })
+#define ll_entry_start(_type, _list) \
+({ \
+ static char start[0] __aligned(4) __attribute__((unused, \
+ section(".u_boot_list_2_"#_list"_1"))); \
+ (_type *)&start; \
+})
/**
- * ll_entry_count() - Return the number of elements in linker-generated array
+ * ll_entry_end() - Point after last entry of linker-generated array
* @_type: Data type of the entry
- * @_section_u: Subsection of u_boot_list in which this entry is placed
+ * @_list: Name of the list in which this entry is placed
* (with underscores instead of dots)
*
+ * This function returns (_type *) pointer after the very last entry of
+ * a linker-generated array placed into subsection of .u_boot_list
+ * section specified by _list argument.
+ *
+ * Since this macro defines an array end symbol, its leftmost index
+ * must be 2 and its rightmost index must be 3.
+ *
+ * Example:
+ * struct my_sub_cmd *msc = ll_entry_end(struct my_sub_cmd, cmd_sub);
+ */
+#define ll_entry_end(_type, _list) \
+({ \
+ static char end[0] __aligned(4) __attribute__((unused, \
+ section(".u_boot_list_2_"#_list"_3"))); \
+ (_type *)&end; \
+})
+/**
+ * ll_entry_count() - Return the number of elements in linker-generated array
+ * @_type: Data type of the entry
+ * @_list: Name of the list of which the number of elements is computed
+ *
* This function returns the number of elements of a linker-generated array
- * placed into subsection of .u_boot_list section specified by _section_u
+ * placed into subsection of .u_boot_list section specified by _list
* argument. The result is of an unsigned int type.
*
* Example:
@@ -108,23 +215,19 @@
* for (i = 0; i < count; i++, msc++)
* printf("Entry %i, x=%i y=%i\n", i, msc->x, msc->y);
*/
-#define ll_entry_count(_type, _section_u) \
+#define ll_entry_count(_type, _list) \
({ \
- extern _type _u_boot_list_##_section_u##__start; \
- extern _type _u_boot_list_##_section_u##__end; \
- unsigned int _ll_result = \
- &_u_boot_list_##_section_u##__end - \
- &_u_boot_list_##_section_u##__start; \
+ _type *start = ll_entry_start(_type, _list); \
+ _type *end = ll_entry_end(_type, _list); \
+ unsigned int _ll_result = end - start; \
_ll_result; \
})
-
/**
* ll_entry_get() - Retrieve entry from linker-generated array by name
* @_type: Data type of the entry
* @_name: Name of the entry
- * @_section_u: Subsection of u_boot_list in which this entry is placed
- * (with underscores instead of dots)
+ * @_list: Name of the list in which this entry is placed
*
* This function returns a pointer to a particular entry in LG-array
* identified by the subsection of u_boot_list where the entry resides
@@ -138,11 +241,54 @@
* ...
* struct my_sub_cmd *c = ll_entry_get(struct my_sub_cmd, my_sub_cmd, cmd_sub);
*/
-#define ll_entry_get(_type, _name, _section_u) \
+#define ll_entry_get(_type, _name, _list) \
({ \
- extern _type _u_boot_list_##_section_u##_##_name; \
- _type *_ll_result = &_u_boot_list_##_section_u##_##_name;\
+ extern _type _u_boot_list_2_##_list##_2_##_name; \
+ _type *_ll_result = \
+ &_u_boot_list_2_##_list##_2_##_name; \
_ll_result; \
})
+/**
+ * ll_start() - Point to first entry of first linker-generated array
+ * @_type: Data type of the entry
+ *
+ * This function returns (_type *) pointer to the very first entry of
+ * the very first linker-generated array.
+ *
+ * Since this macro defines the start of the linker-generated arrays,
+ * its leftmost index must be 1.
+ *
+ * Example:
+ * struct my_sub_cmd *msc = ll_start(struct my_sub_cmd);
+ */
+#define ll_start(_type) \
+({ \
+ static char start[0] __aligned(4) __attribute__((unused, \
+ section(".u_boot_list_1"))); \
+ (_type *)&start; \
+})
+
+/**
+ * ll_entry_end() - Point after last entry of last linker-generated array
+ * @_type: Data type of the entry
+ *
+ * This function returns (_type *) pointer after the very last entry of
+ * the very last linker-generated array.
+ *
+ * Since this macro defines the end of the linker-generated arrays,
+ * its leftmost index must be 3.
+ *
+ * Example:
+ * struct my_sub_cmd *msc = ll_end(struct my_sub_cmd);
+ */
+#define ll_end(_type) \
+({ \
+ static char end[0] __aligned(4) __attribute__((unused, \
+ section(".u_boot_list_3"))); \
+ (_type *)&end; \
+})
+
+#endif /* __ASSEMBLY__ */
+
#endif /* __LINKER_LISTS_H__ */
diff --git a/include/mmc.h b/include/mmc.h
index a13e2bd..de6d497 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -259,6 +259,7 @@ struct mmc {
void (*set_ios)(struct mmc *mmc);
int (*init)(struct mmc *mmc);
int (*getcd)(struct mmc *mmc);
+ int (*getwp)(struct mmc *mmc);
uint b_max;
};
@@ -274,6 +275,7 @@ int get_mmc_num(void);
int board_mmc_getcd(struct mmc *mmc);
int mmc_switch_part(int dev_num, unsigned int part_num);
int mmc_getcd(struct mmc *mmc);
+int mmc_getwp(struct mmc *mmc);
void spl_mmc_load(void) __noreturn;
#ifdef CONFIG_GENERIC_MMC
diff --git a/include/ns9750_bbus.h b/include/ns9750_bbus.h
deleted file mode 100644
index 9485338..0000000
--- a/include/ns9750_bbus.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/***********************************************************************
- *
- * Copyright (C) 2004 by FS Forth-Systeme GmbH.
- * All rights reserved.
- *
- * $Id: ns9750_bbus.h,v 1.1 2004/02/16 10:37:20 mpietrek Exp $
- * @Author: Markus Pietrek
- * @Descr: Definitions for BBus usage
- * @References: [1] NS9750 Hardware Reference Manual/December 2003 Chap. 10
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- *
- ***********************************************************************/
-
-#ifndef FS_NS9750_BBUS_H
-#define FS_NS9750_BBUS_H
-
-#define NS9750_BBUS_MODULE_BASE (0x90600000)
-
-#define get_bbus_reg_addr(c) \
- ((volatile unsigned int *)(NS9750_BBUS_MODULE_BASE+(unsigned int) (c)))
-
-/* We have support for 50 GPIO pins */
-
-#define get_gpio_cfg_reg_addr(pin) \
- get_bbus_reg_addr( NS9750_BBUS_GPIO_CFG_BASE + (((pin) >> 3) * 4) )
-
-/* To Read/Modify/Write a pin configuration register, use it like
- set_gpio_cfg_reg_val( 12, NS9750_GPIO_CFG_FUNC_GPIO|NS9750_GPIO_CFG_OUTPUT );
- They should be wrapped by cli()/sti() */
-#define set_gpio_cfg_reg_val(pin,cfg) \
- *get_gpio_cfg_reg_addr(pin)=(*get_gpio_cfg_reg_addr((pin)) & \
- ~NS9750_GPIO_CFG_MASK((pin))) |\
- NS9750_GPIO_CFG_VAL((pin),(cfg));
-
-#define NS9750_GPIO_CFG_MASK(pin) (NS9750_GPIO_CFG_VAL(pin, \
- NS9750_GPIO_CFG_MA))
-#define NS9750_GPIO_CFG_VAL(pin,cfg) ((cfg) << (((pin) % 8) * 4))
-
-#define NS9750_GPIO_CFG_MA (0x0F)
-#define NS9750_GPIO_CFG_INPUT (0x00)
-#define NS9750_GPIO_CFG_OUTPUT (0x08)
-#define NS9750_GPIO_CFG_FUNC_GPIO (0x03)
-#define NS9750_GPIO_CFG_FUNC_2 (0x02)
-#define NS9750_GPIO_CFG_FUNC_1 (0x01)
-#define NS9750_GPIO_CFG_FUNC_0 (0x00)
-
-/* the register addresses */
-
-#define NS9750_BBUS_MASTER_RESET (0x00)
-#define NS9750_BBUS_GPIO_CFG_BASE (0x10)
-#define NS9750_BBUS_GPIO_CTRL_BASE (0x30)
-#define NS9750_BBUS_GPIO_STAT_BASE (0x40)
-#define NS9750_BBUS_MONITOR (0x50)
-#define NS9750_BBUS_DMA_INT_STAT (0x60)
-#define NS9750_BBUS_DMA_INT_ENABLE (0x64)
-#define NS9750_BBUS_USB_CFG (0x70)
-#define NS9750_BBUS_ENDIAN_CFG (0x80)
-#define NS9750_BBUS_ARM_WAKE_UP (0x90)
-
-/* register bit fields */
-
-#define NS9750_BBUS_MASTER_RESET_UTIL (0x00000100)
-#define NS9750_BBUS_MASTER_RESET_I2C (0x00000080)
-#define NS9750_BBUS_MASTER_RESET_1284 (0x00000040)
-#define NS9750_BBUS_MASTER_RESET_SER4 (0x00000020)
-#define NS9750_BBUS_MASTER_RESET_SER3 (0x00000010)
-#define NS9750_BBUS_MASTER_RESET_SER2 (0x00000008)
-#define NS9750_BBUS_MASTER_RESET_SER1 (0x00000004)
-#define NS9750_BBUS_MASTER_RESET_USB (0x00000002)
-#define NS9750_BBUS_MASTER_RESET_DMA (0x00000001)
-
-/* BS9750_BBUS_DMA_INT_BINT* are valid for *DMA_INT_STAT and *DMA_INT_ENABLE */
-
-#define NS9750_BBUS_DMA_INT_BINT16 (0x00010000)
-#define NS9750_BBUS_DMA_INT_BINT15 (0x00008000)
-#define NS9750_BBUS_DMA_INT_BINT14 (0x00004000)
-#define NS9750_BBUS_DMA_INT_BINT13 (0x00002000)
-#define NS9750_BBUS_DMA_INT_BINT12 (0x00001000)
-#define NS9750_BBUS_DMA_INT_BINT11 (0x00000800)
-#define NS9750_BBUS_DMA_INT_BINT10 (0x00000400)
-#define NS9750_BBUS_DMA_INT_BINT9 (0x00000200)
-#define NS9750_BBUS_DMA_INT_BINT8 (0x00000100)
-#define NS9750_BBUS_DMA_INT_BINT7 (0x00000080)
-#define NS9750_BBUS_DMA_INT_BINT6 (0x00000040)
-#define NS9750_BBUS_DMA_INT_BINT5 (0x00000020)
-#define NS9750_BBUS_DMA_INT_BINT4 (0x00000010)
-#define NS9750_BBUS_DMA_INT_BINT3 (0x00000008)
-#define NS9750_BBUS_DMA_INT_BINT2 (0x00000004)
-#define NS9750_BBUS_DMA_INT_BINT1 (0x00000002)
-#define NS9750_BBUS_DMA_INT_BINT0 (0x00000001)
-
-#define NS9750_BBUS_USB_CFG_OUTEN (0x00000008)
-#define NS9750_BBUS_USB_CFG_SPEED (0x00000004)
-#define NS9750_BBUS_USB_CFG_CFG_MA (0x00000003)
-#define NS9750_BBUS_USB_CFG_CFG_HOST_SOFT (0x00000003)
-#define NS9750_BBUS_USB_CFG_CFG_DEVICE (0x00000002)
-#define NS9750_BBUS_USB_CFG_CFG_HOST (0x00000001)
-#define NS9750_BBUS_USB_CFG_CFG_DIS (0x00000000)
-
-#define NS9750_BBUS_ENDIAN_CFG_AHBM (0x00001000)
-#define NS9750_BBUS_ENDIAN_CFG_I2C (0x00000080)
-#define NS9750_BBUS_ENDIAN_CFG_IEEE1284 (0x00000040)
-#define NS9750_BBUS_ENDIAN_CFG_SER4 (0x00000020)
-#define NS9750_BBUS_ENDIAN_CFG_SER3 (0x00000010)
-#define NS9750_BBUS_ENDIAN_CFG_SER2 (0x00000008)
-#define NS9750_BBUS_ENDIAN_CFG_SER1 (0x00000004)
-#define NS9750_BBUS_ENDIAN_CFG_USB (0x00000002)
-#define NS9750_BBUS_ENDIAN_CFG_DMA (0x00000001)
-
-#endif /* FS_NS9750_BBUS_H */
diff --git a/include/ns9750_mem.h b/include/ns9750_mem.h
deleted file mode 100644
index 666e412..0000000
--- a/include/ns9750_mem.h
+++ /dev/null
@@ -1,172 +0,0 @@
-/***********************************************************************
- *
- * Copyright (C) 2004 by FS Forth-Systeme GmbH.
- * All rights reserved.
- *
- * $Id: ns9750_mem.h,v 1.1 2004/02/16 10:37:20 mpietrek Exp $
- * @Author: Markus Pietrek
- * @Descr: Definitions for Memory Control Module
- * @References: [1] NS9750 Hardware Reference Manual/December 2003 Chap. 5
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- ***********************************************************************/
-
-#ifndef FS_NS9750_MEM_H
-#define FS_NS9750_SYS_H
-
-#define NS9750_MEM_MODULE_BASE (0xA0700000)
-
-#define get_mem_reg_addr(c) \
- ((volatile unsigned int *)(NS9750_MEM_MODULE_BASE+(unsigned int) (c)))
-
-/* the register addresses */
-
-#define NS9750_MEM_CTRL (0x0000)
-#define NS9750_MEM_STATUS (0x0004)
-#define NS9750_MEM_CFG (0x0008)
-#define NS9750_MEM_DYN_CTRL (0x0020)
-#define NS9750_MEM_DYN_REFRESH (0x0024)
-#define NS9750_MEM_DYN_READ_CFG (0x0028)
-#define NS9750_MEM_DYN_TRP (0x0030)
-#define NS9750_MEM_DYN_TRAS (0x0034)
-#define NS9750_MEM_DYN_TSREX (0x0038)
-#define NS9750_MEM_DYN_TAPR (0x003C)
-#define NS9750_MEM_DYN_TDAL (0x0040)
-#define NS9750_MEM_DYN_TWR (0x0044)
-#define NS9750_MEM_DYN_TRC (0x0048)
-#define NS9750_MEM_DYN_TRFC (0x004C)
-#define NS9750_MEM_DYN_TXSR (0x0050)
-#define NS9750_MEM_DYN_TRRD (0x0054)
-#define NS9750_MEM_DYN_TMRD (0x0058)
-#define NS9750_MEM_STAT_EXT_WAIT (0x0080)
-#define NS9750_MEM_DYN_CFG_BASE (0x0100)
-#define NS9750_MEM_DYN_RAS_CAS_BASE (0x0104)
-#define NS9750_MEM_STAT_CFG_BASE (0x0200)
-#define NS9750_MEM_STAT_WAIT_WEN_BASE (0x0204)
-#define NS9750_MEM_STAT_WAIT_OEN_BASE (0x0208)
-#define NS9750_MEM_STAT_WAIT_RD_BASE (0x020C)
-#define NS9750_MEM_STAT_WAIT_PAGE_BASE (0x0210)
-#define NS9750_MEM_STAT_WAIR_WR_BASE (0x0214)
-#define NS9750_MEM_STAT_WAIT_TURN_BASE (0x0218)
-
-/* the vectored register addresses */
-
-#define NS9750_MEM_DYN_CFG(c) (NS9750_MEM_DYN_CFG_BASE + (c)*0x20)
-#define NS9750_MEM_DYN_RAS_CAS(c) (NS9750_MEM_DYN_RAS_CAS_BASE + (c)*0x20)
-#define NS9750_MEM_STAT_CFG(c) (NS9750_MEM_STAT_CFG_BASE + (c)*0x20)
-#define NS9750_MEM_STAT_WAIT_WEN(c) (NS9750_MEM_STAT_WAIT_WEN_BASE+(c)*0x20)
-#define NS9750_MEM_STAT_WAIT_OEN(c) (NS9750_MEM_STAT_WAIT_OEN_BASE+(c)*0x20)
-#define NS9750_MEM_STAT_RD(c) (NS9750_MEM_STAT_WAIT_RD_BASE+(c)*0x20)
-#define NS9750_MEM_STAT_PAGE(c) (NS9750_MEM_STAT_WAIT_PAGE_BASE+(c)*0x20)
-#define NS9750_MEM_STAT_WR(c) (NS9750_MEM_STAT_WAIT_WR_BASE+(c)*0x20)
-#define NS9750_MEM_STAT_TURN(c) (NS9750_MEM_STAT_WAIT_TURN_BASE+(c)*0x20)
-
-/* register bit fields */
-
-#define NS9750_MEM_CTRL_L (0x00000004)
-#define NS9750_MEM_CTRL_M (0x00000002)
-#define NS9750_MEM_CTRL_E (0x00000001)
-
-#define NS9750_MEM_STAT_SA (0x00000004)
-#define NS9750_MEM_STAT_S (0x00000002)
-#define NS9750_MEM_STAT_B (0x00000001)
-
-#define NS9750_MEM_CFG_CLK (0x00000010)
-#define NS9750_MEM_CFG_N (0x00000001)
-
-#define NS9750_MEM_DYN_CTRL_NRP (0x00004000)
-#define NS9750_MEM_DYN_CTRL_DP (0x00002000)
-#define NS9750_MEM_DYN_CTRL_I_MA (0x00000180)
-#define NS9750_MEM_DYN_CTRL_I_NORMAL (0x00000000)
-#define NS9750_MEM_DYN_CTRL_I_MODE (0x00000080)
-#define NS9750_MEM_DYN_CTRL_I_PALL (0x00000100)
-#define NS9750_MEM_DYN_CTRL_I_NOP (0x00000180)
-#define NS9750_MEM_DYN_CTRL_SR (0x00000002)
-#define NS9750_MEM_DYN_CTRL_CE (0x00000001)
-
-
-#define NS9750_MEM_DYN_REFRESH_MA (0x000007FF)
-
-#define NS9750_MEM_DYN_READ_CFG_MA (0x00000003)
-#define NS9750_MEM_DYN_READ_CFG_DELAY0 (0x00000001)
-#define NS9750_MEM_DYN_READ_CFG_DELAY1 (0x00000002)
-#define NS9750_MEM_DYN_READ_CFG_DELAY2 (0x00000003)
-
-#define NS9750_MEM_DYN_TRP_MA (0x0000000F)
-
-#define NS9750_MEM_DYN_TRAS_MA (0x0000000F)
-
-#define NS9750_MEM_DYN_TSREX_MA (0x0000000F)
-
-#define NS9750_MEM_DYN_TAPR_MA (0x0000000F)
-
-#define NS9750_MEM_DYN_TDAL_MA (0x0000000F)
-
-#define NS9750_MEM_DYN_TWR_MA (0x0000000F)
-
-#define NS9750_MEM_DYN_TRC_MA (0x0000001F)
-
-#define NS9750_MEM_DYN_TRFC_MA (0x0000001F)
-
-#define NS9750_MEM_DYN_TXSR_MA (0x0000001F)
-
-#define NS9750_MEM_DYN_TRRD_MA (0x0000000F)
-
-#define NS9750_MEM_DYN_TMRD_MA (0x0000000F)
-
-#define NS9750_MEM_STAT_EXTW_WAIT_MA (0x0000003F)
-
-#define NS9750_MEM_DYN_CFG_P (0x00100000)
-#define NS9750_MEM_DYN_CFG_BDMC (0x00080000)
-#define NS9750_MEM_DYN_CFG_AM (0x00004000)
-#define NS9750_MEM_DYN_CFG_AM_MA (0x00001F80)
-#define NS9750_MEM_DYN_CFG_MD (0x00000018)
-
-#define NS9750_MEM_DYN_RAS_CAS_CAS_MA (0x00000300)
-#define NS9750_MEM_DYN_RAS_CAS_CAS_1 (0x00000100)
-#define NS9750_MEM_DYN_RAS_CAS_CAS_2 (0x00000200)
-#define NS9750_MEM_DYN_RAS_CAS_CAS_3 (0x00000300)
-#define NS9750_MEM_DYN_RAS_CAS_RAS_MA (0x00000003)
-#define NS9750_MEM_DYN_RAS_CAS_RAS_1 (0x00000001)
-#define NS9750_MEM_DYN_RAS_CAS_RAS_2 (0x00000002)
-#define NS9750_MEM_DYN_RAS_CAS_RAS_3 (0x00000003)
-
-#define NS9750_MEM_STAT_CFG_PSMC (0x00100000)
-#define NS9750_MEM_STAT_CFG_BSMC (0x00080000)
-#define NS9750_MEM_STAT_CFG_EW (0x00000100)
-#define NS9750_MEM_STAT_CFG_PB (0x00000080)
-#define NS9750_MEM_STAT_CFG_PC (0x00000040)
-#define NS9750_MEM_STAT_CFG_PM (0x00000008)
-#define NS9750_MEM_STAT_CFG_MW_MA (0x00000003)
-#define NS9750_MEM_STAT_CFG_MW_8 (0x00000000)
-#define NS9750_MEM_STAT_CFG_MW_16 (0x00000001)
-#define NS9750_MEM_STAT_CFG_MW_32 (0x00000002)
-
-#define NS9750_MEM_STAT_WAIT_WEN_MA (0x0000000F)
-
-#define NS9750_MEM_STAT_WAIT_OEN_MA (0x0000000F)
-
-#define NS9750_MEM_STAT_WAIT_RD_MA (0x0000001F)
-
-#define NS9750_MEM_STAT_WAIT_PAGE_MA (0x0000001F)
-
-#define NS9750_MEM_STAT_WAIT_WR_MA (0x0000001F)
-
-#define NS9750_MEM_STAT_WAIT_TURN_MA (0x0000000F)
-
-
-#endif /* FS_NS9750_MEM_H */
diff --git a/include/ns9750_ser.h b/include/ns9750_ser.h
deleted file mode 100644
index b5c297e..0000000
--- a/include/ns9750_ser.h
+++ /dev/null
@@ -1,202 +0,0 @@
-/***********************************************************************
- *
- * Copyright (C) 2004 by FS Forth-Systeme GmbH.
- * All rights reserved.
- *
- * $Id: ns9750_ser.h,v 1.1 2004/02/16 10:37:20 mpietrek Exp $
- * @Author: Markus Pietrek
- * @References: [1] NS9750 Hardware Reference, December 2003
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- ***********************************************************************/
-
-#ifndef FS_NS9750_SER_H
-#define FS_NS9750_SER_H
-
-#define NS9750_SER_MODULE_BASE (0x90200000)
-
-#define get_ser_reg_addr(c) \
- ((volatile unsigned int *)(NS9750_SER_MODULE_BASE+(unsigned int) (c)))
-
-#define get_ser_reg_addr_channel(reg,chan) \
- get_ser_reg_addr((reg)+(((chan)<2)?0:0x00100000)+(((chan)&1)?0x40:0))
-
-/* the register addresses */
-
-#define NS9750_SER_CTRL_A (0x00)
-#define NS9750_SER_CTRL_B (0x04)
-#define NS9750_SER_STAT_A (0x08)
-#define NS9750_SER_BITRATE (0x0C)
-#define NS9750_SER_FIFO (0x10)
-#define NS9750_SER_RX_BUF_TIMER (0x14)
-#define NS9750_SER_RX_CHAR_TIMER (0x18)
-#define NS9750_SER_RX_MATCH (0x1C)
-#define NS9750_SER_RX_MATCH_MASK (0x20)
-#define NS9750_SER_FLOW_CTRL (0x34)
-#define NS9750_SER_FLOW_CTRL_FORCE (0x38)
-
-/* register bit fields */
-
-/* control A register */
-
-#define NS9750_SER_CTRL_A_CE (0x80000000)
-#define NS9750_SER_CTRL_A_BRK (0x40000000)
-#define NS9750_SER_CTRL_A_STICKP (0x20000000)
-#define NS9750_SER_CTRL_A_EPS (0x10000000)
-#define NS9750_SER_CTRL_A_PE (0x08000000)
-#define NS9750_SER_CTRL_A_STOP (0x04000000)
-#define NS9750_SER_CTRL_A_WLS_MA (0x03000000)
-#define NS9750_SER_CTRL_A_WLS_5 (0x00000000)
-#define NS9750_SER_CTRL_A_WLS_6 (0x01000000)
-#define NS9750_SER_CTRL_A_WLS_7 (0x02000000)
-#define NS9750_SER_CTRL_A_WLS_8 (0x03000000)
-#define NS9750_SER_CTRL_A_CTSTX (0x00800000)
-#define NS9750_SER_CTRL_A_RTSRX (0x00400000)
-#define NS9750_SER_CTRL_A_RL (0x00200000)
-#define NS9750_SER_CTRL_A_LL (0x00100000)
-#define NS9750_SER_CTRL_A_RES (0x000CF000)
-#define NS9750_SER_CTRL_A_DTR (0x00020000)
-#define NS9750_SER_CTRL_A_RTS (0x00010000)
-#define NS9750_SER_CTRL_A_RIE_MA (0x00000E00)
-#define NS9750_SER_CTRL_A_ERXDMA (0x00000100)
-#define NS9750_SER_CTRL_A_RIC_MA (0x000000E0)
-#define NS9750_SER_CTRL_A_TIC_MA (0x0000001E)
-#define NS9750_SER_CTRL_A_ETXDMA (0x00000001)
-
-/* control B register */
-
-#define NS9750_SER_CTRL_B_RDM1 (0x80000000)
-#define NS9750_SER_CTRL_B_RDM2 (0x40000000)
-#define NS9750_SER_CTRL_B_RDM3 (0x20000000)
-#define NS9750_SER_CTRL_B_RDM4 (0x10000000)
-#define NS9750_SER_CTRL_B_RBGT (0x08000000)
-#define NS9750_SER_CTRL_B_RCGT (0x04000000)
-#define NS9750_SER_CTRL_B_MODE_MA (0x00300000)
-#define NS9750_SER_CTRL_B_MODE_UART (0x00000000)
-#define NS9750_SER_CTRL_B_MODE_HDLC (0x00100000)
-#define NS9750_SER_CTRL_B_MODE_SPI_M (0x00200000)
-#define NS9750_SER_CTRL_B_MODE_SPI_S (0x00300000)
-#define NS9750_SER_CTRL_B_BITORDR (0x00080000)
-#define NS9750_SER_CTRL_B_RES (0x0007703F)
-#define NS9750_SER_CTRL_B_RTSTX (0x00008000)
-#define NS9750_SER_CTRL_B_ENDEC_MA (0x00000FC0)
-
-/* status A register */
-
-#define NS9750_SER_STAT_A_MATCH1 (0x80000000)
-#define NS9750_SER_STAT_A_MATCH2 (0x40000000)
-#define NS9750_SER_STAT_A_MATCH3 (0x20000000)
-#define NS9750_SER_STAT_A_MATCH4 (0x10000000)
-#define NS9750_SER_STAT_A_BGAP (0x08000000)
-#define NS9750_SER_STAT_A_CGAP (0x04000000)
-#define NS9750_SER_STAT_A_RXFDB_MA (0x00300000)
-#define NS9750_SER_STAT_A_RXFDB_FULL (0x00000000)
-#define NS9750_SER_STAT_A_RXFDB_1 (0x00100000)
-#define NS9750_SER_STAT_A_RXFDB_2 (0x00200000)
-#define NS9750_SER_STAT_A_RXFDB_3 (0x00300000)
-#define NS9750_SER_STAT_A_DCD (0x00080000)
-#define NS9750_SER_STAT_A_RI (0x00040000)
-#define NS9750_SER_STAT_A_DSR (0x00020000)
-#define NS9750_SER_STAT_A_CTS (0x00010000)
-#define NS9750_SER_STAT_A_RBRK (0x00008000)
-#define NS9750_SER_STAT_A_RFE (0x00004000)
-#define NS9750_SER_STAT_A_RPE (0x00002000)
-#define NS9750_SER_STAT_A_ROVER (0x00001000)
-#define NS9750_SER_STAT_A_RRDY (0x00000800)
-#define NS9750_SER_STAT_A_RHALF (0x00000400)
-#define NS9750_SER_STAT_A_RBC (0x00000200)
-#define NS9750_SER_STAT_A_RFULL (0x00000100)
-#define NS9750_SER_STAT_A_DCDI (0x00000080)
-#define NS9750_SER_STAT_A_RII (0x00000040)
-#define NS9750_SER_STAT_A_DSRI (0x00000020)
-#define NS9750_SER_STAT_A_CTSI (0x00000010)
-#define NS9750_SER_STAT_A_TRDY (0x00000008)
-#define NS9750_SER_STAT_A_THALF (0x00000004)
-#define NS9750_SER_STAT_A_TBC (0x00000002)
-#define NS9750_SER_STAT_A_TEMPTY (0x00000001)
-
-#define NS9750_SER_STAT_A_RX_COND_ERR ( NS9750_SER_STAT_A_RFE | \
- NS9750_SER_STAT_A_ROVER | \
- NS9750_SER_STAT_A_RPE )
-#define NS9750_SER_STAT_A_RX_COND_ALL ( NS9750_SER_STAT_A_RX_COND_ERR | \
- NS9750_SER_STAT_A_RBRK | \
- NS9750_SER_STAT_A_RRDY | \
- NS9750_SER_STAT_A_RHALF | \
- NS9750_SER_STAT_A_RBC | \
- NS9750_SER_STAT_A_DCDI | \
- NS9750_SER_STAT_A_RII | \
- NS9750_SER_STAT_A_DSRI | \
- NS9750_SER_STAT_A_CTSI )
-#define NS9750_SER_STAT_A_TX_COND_ALL ( NS9750_SER_STAT_A_TRDY | \
- NS9750_SER_STAT_A_THALF | \
- NS9750_SER_STAT_A_TBC | \
- NS9750_SER_STAT_A_TEMPTY )
-/* bit rate register */
-
-#define NS9750_SER_BITRATE_EBIT (0x80000000)
-#define NS9750_SER_BITRATE_TMODE (0x40000000)
-#define NS9750_SER_BITRATE_RXSRC (0x20000000)
-#define NS9750_SER_BITRATE_TXSRC (0x10000000)
-#define NS9750_SER_BITRATE_RXEXT (0x08000000)
-#define NS9750_SER_BITRATE_TXEXT (0x04000000)
-#define NS9750_SER_BITRATE_CLKMUX_MA (0x03000000)
-#define NS9750_SER_BITRATE_CLKMUX_XTAL (0x00000000)
-#define NS9750_SER_BITRATE_CLKMUX_BCLK (0x01000000)
-#define NS9750_SER_BITRATE_CLKMUX_OUT1 (0x02000000)
-#define NS9750_SER_BITRATE_CLKMUX_OUT2 (0x03000000)
-#define NS9750_SER_BITRATE_TXCINV (0x00800000)
-#define NS9750_SER_BITRATE_RXCINV (0x00400000)
-#define NS9750_SER_BITRATE_TCDR_MA (0x00180000)
-#define NS9750_SER_BITRATE_TCDR_1 (0x00000000)
-#define NS9750_SER_BITRATE_TCDR_8 (0x00080000)
-#define NS9750_SER_BITRATE_TCDR_16 (0x00100000)
-#define NS9750_SER_BITRATE_TCDR_32 (0x00180000)
-#define NS9750_SER_BITRATE_RCDR_MA (0x00070000)
-#define NS9750_SER_BITRATE_RCDR_1 (0x00000000)
-#define NS9750_SER_BITRATE_RCDR_8 (0x00020000)
-#define NS9750_SER_BITRATE_RCDR_16 (0x00040000)
-#define NS9750_SER_BITRATE_RCDR_32 (0x00060000)
-#define NS9750_SER_BITRATE_TICS (0x00010000)
-#define NS9750_SER_BITRATE_RICS (0x00008000)
-#define NS9750_SER_BITRATE_N_MA (0x00007FFF)
-
-/* receive buffer gap timer */
-
-#define NS9750_SER_RX_BUF_TIMER_TRUN (0x80000000) /* UART and SPI */
-#define NS9750_SER_RX_BUF_TIMER_BT_MA (0x0000FFFF) /* UART and SPI */
-#define NS9750_SER_RX_BUF_TIMER_MAXLEN_MA (0x0000FFFF) /* HDLC only */
-
-/* receive character gap timer */
-
-#define NS9750_SER_RX_CHAR_TIMER_TRUN (0x80000000)
-#define NS9750_SER_RX_CHAR_TIMER_CT_MA (0x000FFFFF)
-
-/* receive match */
-
-#define NS9750_SER_RX_MATCH_RDMB1_MA (0xFF000000)
-#define NS9750_SER_RX_MATCH_RDMB2_MA (0x00FF0000)
-#define NS9750_SER_RX_MATCH_RDMB3_MA (0x0000FF00)
-#define NS9750_SER_RX_MATCH_RDMB4_MA (0x000000FF)
-
-/* receive match mask */
-
-#define NS9750_SER_RX_MATCH_MASK_RDMB1_MA (0xFF000000)
-#define NS9750_SER_RX_MATCH_MASK_RDMB2_MA (0x00FF0000)
-#define NS9750_SER_RX_MATCH_MASK_RDMB3_MA (0x0000FF00)
-#define NS9750_SER_RX_MATCH_MASK_RDMB4_MA (0x000000FF)
-
-#endif /* FS_NS9750_SER_H */
diff --git a/include/ns9750_sys.h b/include/ns9750_sys.h
deleted file mode 100644
index f1dc2b2..0000000
--- a/include/ns9750_sys.h
+++ /dev/null
@@ -1,215 +0,0 @@
-/***********************************************************************
- *
- * Copyright (C) 2004 by FS Forth-Systeme GmbH.
- * All rights reserved.
- *
- * $Id: ns9750_sys.h,v 1.1 2004/02/16 10:37:20 mpietrek Exp $
- * @Author: Markus Pietrek
- * @Descr: Definitions for SYS Control Module
- * @References: [1] NS9750 Hardware Reference Manual/December 2003 Chap. 4
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- ***********************************************************************/
-
-#ifndef FS_NS9750_SYS_H
-#define FS_NS9750_SYS_H
-
-#define NS9750_SYS_MODULE_BASE (0xA0900000)
-
-#define get_sys_reg_addr(c) \
- ((volatile unsigned int *)(NS9750_SYS_MODULE_BASE+(unsigned int) (c)))
-
-/* the register addresses */
-
-#define NS9750_SYS_AHB_GEN (0x0000)
-#define NS9750_SYS_BRC_BASE (0x0004)
-#define NS9750_SYS_AHB_TIMEOUT (0x0014)
-#define NS9750_SYS_AHB_ERROR1 (0x0018)
-#define NS9750_SYS_AHB_ERROR2 (0x001C)
-#define NS9750_SYS_AHB_MON (0x0020)
-#define NS9750_SYS_TIMER_COUNT_BASE (0x0044)
-#define NS9750_SYS_TIMER_READ_BASE (0x0084)
-#define NS9750_SYS_INT_VEC_ADR_BASE (0x00C4)
-#define NS9750_SYS_INT_CFG_BASE (0x0144)
-#define NS9750_SYS_ISRADDR (0x0164)
-#define NS9750_SYS_INT_STAT_ACTIVE (0x0168)
-#define NS9750_SYS_INT_STAT_RAW (0x016C)
-#define NS9750_SYS_TIMER_INT_STAT (0x0170)
-#define NS9750_SYS_SW_WDOG_CFG (0x0174)
-#define NS9750_SYS_SW_WDOG_TIMER (0x0178)
-#define NS9750_SYS_CLOCK (0x017C)
-#define NS9750_SYS_RESET (0x0180)
-#define NS9750_SYS_MISC (0x0184)
-#define NS9750_SYS_PLL (0x0188)
-#define NS9750_SYS_ACT_INT_STAT (0x018C)
-#define NS9750_SYS_TIMER_CTRL_BASE (0x0190)
-#define NS9750_SYS_CS_DYN_BASE_BASE (0x01D0)
-#define NS9750_SYS_CS_DYN_MASK_BASE (0x01D4)
-#define NS9750_SYS_CS_STATIC_BASE_BASE (0x01F0)
-#define NS9750_SYS_CS_STATIC_MASK_BASE (0x01F4)
-#define NS9750_SYS_GEN_ID (0x0210)
-#define NS9750_SYS_EXT_INT_CTRL_BASE (0x0214)
-
-/* the vectored register addresses */
-
-#define NS9750_SYS_TIMER_COUNT(c) (NS9750_SYS_TIMER_COUNT_BASE + (c))
-#define NS9750_SYS_TIMER_READ(c) (NS9750_SYS_TIMER_READ_BASE + (c))
-#define NS9750_SYS_INT_VEC_ADR(c) (NS9750_SYS_INT_VEC_ADR_BASE + (c))
-#define NS9750_SYS_TIMER_CTRL(c) (NS9750_SYS_TIMER_CTRL_BASE + (c))
-/* CS_DYN start with 4 */
-#define NS9750_SYS_CS_DYN_BASE(c) (NS9750_SYS_CS_DYN_BASE_BASE + ((c)-4)*2)
-#define NS9750_SYS_CS_DYN_MASK(c) (NS9750_SYS_CS_DYN_MASK_BASE + ((c)-4)*2)
-/* CS_STATIC start with 0 */
-#define NS9750_SYS_CS_STATIC_BASE(c) (NS9750_SYS_CS_STATIC_BASE_BASE + (c)*2)
-#define NS9750_SYS_CS_STATIC_MASK(c) (NS9750_SYS_CS_STATIC_MASK_BASE + (c)*2)
-#define NS9750_SYS_EXT_INT_CTRL(c) (NS9750_SYS_EXT_INT_CTRL + (c))
-
-/* register bit fields */
-
-#define NS9750_SYS_AHB_GEN_EXMAM (0x00000001)
-
-/* need to be n*8bit to BRC channel */
-#define NS9750_SYS_BRC_CEB (0x00000080)
-#define NS9750_SYS_BRC_BRF_MA (0x00000030)
-#define NS9750_SYS_BRC_BRF_100 (0x00000000)
-#define NS9750_SYS_BRC_BRF_75 (0x00000010)
-#define NS9750_SYS_BRC_BRF_50 (0x00000020)
-#define NS9750_SYS_BRC_BRF_25 (0x00000030)
-
-#define NS9750_SYS_AHB_TIMEOUT_BAT_MA (0xFFFF0000)
-#define NS9750_SYS_AHB_TIMEOUT_BMT_MA (0x0000FFFF)
-
-#define NS9750_SYS_AHB_ERROR2_ABL (0x00040000)
-#define NS9750_SYS_AHB_ERROR2_AER (0x00020000)
-#define NS9750_SYS_AHB_ERROR2_ABM (0x00010000)
-#define NS9750_SYS_AHB_ERROR2_ABA (0x00008000)
-#define NS9750_SYS_AHB_ERROR2_HWRT (0x00004000)
-#define NS9750_SYS_AHB_ERROR2_HMID_MA (0x00003C00)
-#define NS9750_SYS_AHB_ERROR2_HTPC_MA (0x000003C0)
-#define NS9750_SYS_AHB_ERROR2_HSZ_MA (0x00000038)
-#define NS9750_SYS_AHB_ERROR2_RR_MA (0x00000007)
-
-#define NS9750_SYS_AHB_MON_EIC (0x00800000)
-#define NS9750_SYS_AHB_MON_MBII (0x00400000)
-#define NS9750_SYS_AHB_MON_MBL_MA (0x003FFFC0)
-#define NS9750_SYS_AHB_MON_MBLDC (0x00000020)
-#define NS9750_SYS_AHB_MON_SERDC (0x00000010)
-#define NS9750_SYS_AHB_MON_BMTC_MA (0x0000000C)
-#define NS9750_SYS_AHB_MON_BMTC_RECORD (0x00000000)
-#define NS9750_SYS_AHB_MON_BMTC_GEN_IRQ (0x00000004)
-#define NS9750_SYS_AHB_MON_BMTC_GEN_RES (0x00000008)
-#define NS9750_SYS_AHB_MON_BATC_MA (0x00000003)
-#define NS9750_SYS_AHB_MON_BATC_RECORD (0x00000000)
-#define NS9750_SYS_AHB_MON_BATC_GEN_IRQ (0x00000001)
-#define NS9750_SYS_AHB_MON_BATC_GEN_RES (0x00000002)
-
-/* need to be n*8bit to Int Level */
-
-#define NS9750_SYS_INT_CFG_IE (0x00000080)
-#define NS9750_SYS_INT_CFG_IT (0x00000020)
-#define NS9750_SYS_INT_CFG_IAD_MA (0x0000001F)
-
-#define NS9750_SYS_TIMER_INT_STAT_MA (0x0000FFFF)
-
-#define NS9750_SYS_SW_WDOG_CFG_SWWE (0x00000080)
-#define NS9750_SYS_SW_WDOG_CFG_SWWI (0x00000020)
-#define NS9750_SYS_SW_WDOG_CFG_SWWIC (0x00000010)
-#define NS9750_SYS_SW_WDOG_CFG_SWTCS_MA (0x00000007)
-#define NS9750_SYS_SW_WDOG_CFG_SWTCS_2 (0x00000000)
-#define NS9750_SYS_SW_WDOG_CFG_SWTCS_4 (0x00000001)
-#define NS9750_SYS_SW_WDOG_CFG_SWTCS_8 (0x00000002)
-#define NS9750_SYS_SW_WDOG_CFG_SWTCS_16 (0x00000003)
-#define NS9750_SYS_SW_WDOG_CFG_SWTCS_32 (0x00000004)
-#define NS9750_SYS_SW_WDOG_CFG_SWTCS_64 (0x00000005)
-
-#define NS9750_SYS_CLOCK_LPCS_MA (0x00000380)
-#define NS9750_SYS_CLOCK_LPCS_1 (0x00000000)
-#define NS9750_SYS_CLOCK_LPCS_2 (0x00000080)
-#define NS9750_SYS_CLOCK_LPCS_4 (0x00000100)
-#define NS9750_SYS_CLOCK_LPCS_8 (0x00000180)
-#define NS9750_SYS_CLOCK_LPCS_EXT (0x00000200)
-#define NS9750_SYS_CLOCK_BBC (0x00000040)
-#define NS9750_SYS_CLOCK_LCC (0x00000020)
-#define NS9750_SYS_CLOCK_MCC (0x00000010)
-#define NS9750_SYS_CLOCK_PARBC (0x00000008)
-#define NS9750_SYS_CLOCK_PC (0x00000004)
-#define NS9750_SYS_CLOCK_MACC (0x00000001)
-
-#define NS9750_SYS_RESET_SR (0x80000000)
-#define NS9750_SYS_RESET_I2CW (0x00100000)
-#define NS9750_SYS_RESET_CSE (0x00080000)
-#define NS9750_SYS_RESET_SMWE (0x00040000)
-#define NS9750_SYS_RESET_EWE (0x00020000)
-#define NS9750_SYS_RESET_PI3WE (0x00010000)
-#define NS9750_SYS_RESET_BBT (0x00000040)
-#define NS9750_SYS_RESET_LCDC (0x00000020)
-#define NS9750_SYS_RESET_MEMC (0x00000010)
-#define NS9750_SYS_RESET_PCIAR (0x00000008)
-#define NS9750_SYS_RESET_PCIM (0x00000004)
-#define NS9750_SYS_RESET_MACM (0x00000001)
-
-#define NS9750_SYS_MISC_REV_MA (0xFF000000)
-#define NS9750_SYS_MISC_PCIA (0x00002000)
-#define NS9750_SYS_MISC_VDIS (0x00001000)
-#define NS9750_SYS_MISC_BMM (0x00000800)
-#define NS9750_SYS_MISC_CS1DB (0x00000400)
-#define NS9750_SYS_MISC_CS1DW_MA (0x00000300)
-#define NS9750_SYS_MISC_MCCM (0x00000080)
-#define NS9750_SYS_MISC_PMSS (0x00000040)
-#define NS9750_SYS_MISC_CS1P (0x00000020)
-#define NS9750_SYS_MISC_ENDM (0x00000008)
-#define NS9750_SYS_MISC_MBAR (0x00000004)
-#define NS9750_SYS_MISC_IRAM0 (0x00000001)
-
-#define NS9750_SYS_PLL_PLLBS (0x02000000)
-#define NS9750_SYS_PLL_PLLFS_MA (0x01800000)
-#define NS9750_SYS_PLL_PLLIS_MA (0x00600000)
-#define NS9750_SYS_PLL_PLLND_MA (0x001F0000)
-#define NS9750_SYS_PLL_PLLSW (0x00008000)
-#define NS9750_SYS_PLL_PLLBSSW (0x00000200)
-#define NS9750_SYS_PLL_FSEL_MA (0x00000180)
-#define NS9750_SYS_PLL_CPCC_MA (0x00000060)
-#define NS9750_SYS_PLL_NDSW_MA (0x0000001F)
-
-#define NS9750_SYS_ACT_INT_STAT_MA (0x0000FFFF)
-
-#define NS9750_SYS_TIMER_CTRL_TEN (0x00008000)
-#define NS9750_SYS_TIMER_CTRL_INTC (0x00000200)
-#define NS9750_SYS_TIMER_CTRL_TLCS_MA (0x000001C0)
-#define NS9750_SYS_TIMER_CTRL_TLCS_1 (0x00000000)
-#define NS9750_SYS_TIMER_CTRL_TLCS_2 (0x00000040)
-#define NS9750_SYS_TIMER_CTRL_TLCS_4 (0x00000080)
-#define NS9750_SYS_TIMER_CTRL_TLCS_8 (0x000000C0)
-#define NS9750_SYS_TIMER_CTRL_TLCS_16 (0x00000100)
-#define NS9750_SYS_TIMER_CTRL_TLCS_32 (0x00000140)
-#define NS9750_SYS_TIMER_CTRL_TLCS_64 (0x00000180)
-#define NS9750_SYS_TIMER_CTRL_TLCS_EXT (0x000001C0)
-#define NS9750_SYS_TIMER_CTRL_TM_MA (0x00000030)
-#define NS9750_SYS_TIMER_CTRL_TM_INT (0x00000000)
-#define NS9750_SYS_TIMER_CTRL_TM_LOW (0x00000010)
-#define NS9750_SYS_TIMER_CTRL_TM_HIGH (0x00000020)
-#define NS9750_SYS_TIMER_CTRL_INTS (0x00000008)
-#define NS9750_SYS_TIMER_CTRL_UDS (0x00000004)
-#define NS9750_SYS_TIMER_CTRL_TSZ (0x00000002)
-#define NS9750_SYS_TIMER_CTRL_REN (0x00000001)
-
-#define NS9750_SYS_EXT_INT_CTRL_STS (0x00000008)
-#define NS9750_SYS_EXT_INT_CTRL_CLR (0x00000004)
-#define NS9750_SYS_EXT_INT_CTRL_PLTY (0x00000002)
-#define NS9750_SYS_EXT_INT_CTRL_LVEDG (0x00000001)
-
-#endif /* FS_NS9750_SYS_H */
diff --git a/include/spl.h b/include/spl.h
index b02f36f..b40be80 100644
--- a/include/spl.h
+++ b/include/spl.h
@@ -59,6 +59,9 @@ void spl_display_print(void);
/* NAND SPL functions */
void spl_nand_load_image(void);
+/* OneNAND SPL functions */
+void spl_onenand_load_image(void);
+
/* NOR SPL functions */
void spl_nor_load_image(void);
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index 3ae348d..43f29f5 100644
--- a/lib/fdtdec.c
+++ b/lib/fdtdec.c
@@ -37,6 +37,7 @@ DECLARE_GLOBAL_DATA_PTR;
static const char * const compat_names[COMPAT_COUNT] = {
COMPAT(UNKNOWN, "<none>"),
COMPAT(NVIDIA_TEGRA20_USB, "nvidia,tegra20-ehci"),
+ COMPAT(NVIDIA_TEGRA114_I2C, "nvidia,tegra114-i2c"),
COMPAT(NVIDIA_TEGRA20_I2C, "nvidia,tegra20-i2c"),
COMPAT(NVIDIA_TEGRA20_DVC, "nvidia,tegra20-i2c-dvc"),
COMPAT(NVIDIA_TEGRA20_EMC, "nvidia,tegra20-emc"),
@@ -45,6 +46,8 @@ static const char * const compat_names[COMPAT_COUNT] = {
COMPAT(NVIDIA_TEGRA20_NAND, "nvidia,tegra20-nand"),
COMPAT(NVIDIA_TEGRA20_PWM, "nvidia,tegra20-pwm"),
COMPAT(NVIDIA_TEGRA20_DC, "nvidia,tegra20-dc"),
+ COMPAT(NVIDIA_TEGRA30_SDMMC, "nvidia,tegra30-sdhci"),
+ COMPAT(NVIDIA_TEGRA20_SDMMC, "nvidia,tegra20-sdhci"),
COMPAT(NVIDIA_TEGRA20_SFLASH, "nvidia,tegra20-sflash"),
COMPAT(NVIDIA_TEGRA20_SLINK, "nvidia,tegra20-slink"),
COMPAT(SMSC_LAN9215, "smsc,lan9215"),
diff --git a/nand_spl/board/freescale/mpc8536ds/Makefile b/nand_spl/board/freescale/mpc8536ds/Makefile
index 9c77826..3a2a2d4 100644
--- a/nand_spl/board/freescale/mpc8536ds/Makefile
+++ b/nand_spl/board/freescale/mpc8536ds/Makefile
@@ -32,7 +32,6 @@ include $(TOPDIR)/config.mk
nandobj := $(OBJTREE)/nand_spl/
LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
-LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \
$(LDFLAGS) $(LDFLAGS_FINAL)
AFLAGS += -DCONFIG_NAND_SPL
@@ -62,11 +61,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds
-Map $(nandobj)u-boot-spl.map \
-o $(nandobj)u-boot-spl
-# The following line expands into whole rule which generates $(LSTSCRIPT),
-# the file containing u-boots LG-array linker section. This is included into
-# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
-$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
-$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT)
+$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \
-ansi -D__ASSEMBLY__ -P - <$< >$@
diff --git a/nand_spl/board/freescale/mpc8569mds/Makefile b/nand_spl/board/freescale/mpc8569mds/Makefile
index 9c77826..3a2a2d4 100644
--- a/nand_spl/board/freescale/mpc8569mds/Makefile
+++ b/nand_spl/board/freescale/mpc8569mds/Makefile
@@ -32,7 +32,6 @@ include $(TOPDIR)/config.mk
nandobj := $(OBJTREE)/nand_spl/
LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
-LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \
$(LDFLAGS) $(LDFLAGS_FINAL)
AFLAGS += -DCONFIG_NAND_SPL
@@ -62,11 +61,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds
-Map $(nandobj)u-boot-spl.map \
-o $(nandobj)u-boot-spl
-# The following line expands into whole rule which generates $(LSTSCRIPT),
-# the file containing u-boots LG-array linker section. This is included into
-# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
-$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
-$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT)
+$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \
-ansi -D__ASSEMBLY__ -P - <$< >$@
diff --git a/nand_spl/board/freescale/mpc8572ds/Makefile b/nand_spl/board/freescale/mpc8572ds/Makefile
index 9c77826..3a2a2d4 100644
--- a/nand_spl/board/freescale/mpc8572ds/Makefile
+++ b/nand_spl/board/freescale/mpc8572ds/Makefile
@@ -32,7 +32,6 @@ include $(TOPDIR)/config.mk
nandobj := $(OBJTREE)/nand_spl/
LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
-LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \
$(LDFLAGS) $(LDFLAGS_FINAL)
AFLAGS += -DCONFIG_NAND_SPL
@@ -62,11 +61,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds
-Map $(nandobj)u-boot-spl.map \
-o $(nandobj)u-boot-spl
-# The following line expands into whole rule which generates $(LSTSCRIPT),
-# the file containing u-boots LG-array linker section. This is included into
-# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
-$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
-$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT)
+$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \
-ansi -D__ASSEMBLY__ -P - <$< >$@
diff --git a/nand_spl/board/freescale/mx31pdk/Makefile b/nand_spl/board/freescale/mx31pdk/Makefile
index fd0dfc1..3d57059 100644
--- a/nand_spl/board/freescale/mx31pdk/Makefile
+++ b/nand_spl/board/freescale/mx31pdk/Makefile
@@ -6,7 +6,6 @@ include $(TOPDIR)/config.mk
nandobj := $(OBJTREE)/nand_spl/
LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
-LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \
$(LDFLAGS_FINAL)
AFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL
@@ -38,11 +37,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds
-Map $(nandobj)u-boot-spl.map \
-o $@
-# The following line expands into whole rule which generates $(LSTSCRIPT),
-# the file containing u-boots LG-array linker section. This is included into
-# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
-$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
-$(nandobj)u-boot.lds: $(LDSCRIPT) $(LSTSCRIPT)
+$(nandobj)u-boot.lds: $(LDSCRIPT)
$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \
-ansi -D__ASSEMBLY__ -P - <$< >$@
diff --git a/nand_spl/board/freescale/mx31pdk/u-boot.lds b/nand_spl/board/freescale/mx31pdk/u-boot.lds
index eaccd55..5f2b5e2 100644
--- a/nand_spl/board/freescale/mx31pdk/u-boot.lds
+++ b/nand_spl/board/freescale/mx31pdk/u-boot.lds
@@ -49,7 +49,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ *(SORT(.u_boot_list*));
}
. = ALIGN(4);
diff --git a/nand_spl/board/freescale/p1010rdb/Makefile b/nand_spl/board/freescale/p1010rdb/Makefile
index c3495ec..f7bdf92 100644
--- a/nand_spl/board/freescale/p1010rdb/Makefile
+++ b/nand_spl/board/freescale/p1010rdb/Makefile
@@ -32,7 +32,6 @@ include $(TOPDIR)/config.mk
nandobj := $(OBJTREE)/nand_spl/
LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
-LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) $(LDFLAGS) \
$(LDFLAGS_FINAL)
AFLAGS += -DCONFIG_NAND_SPL
@@ -62,11 +61,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds
-Map $(nandobj)u-boot-spl.map \
-o $(nandobj)u-boot-spl
-# The following line expands into whole rule which generates $(LSTSCRIPT),
-# the file containing u-boots LG-array linker section. This is included into
-# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
-$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
-$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT)
+$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)board/$(BOARDDIR) \
-ansi -D__ASSEMBLY__ -P - <$< >$@
diff --git a/nand_spl/board/freescale/p1023rds/Makefile b/nand_spl/board/freescale/p1023rds/Makefile
index 9b2c0d7..fb7d561 100644
--- a/nand_spl/board/freescale/p1023rds/Makefile
+++ b/nand_spl/board/freescale/p1023rds/Makefile
@@ -27,7 +27,6 @@ include $(TOPDIR)/config.mk
nandobj := $(OBJTREE)/nand_spl/
LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
-LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \
$(LDFLAGS) $(LDFLAGS_FINAL)
AFLAGS += -DCONFIG_NAND_SPL
@@ -57,11 +56,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds
-Map $(nandobj)u-boot-spl.map \
-o $(nandobj)u-boot-spl
-# The following line expands into whole rule which generates $(LSTSCRIPT),
-# the file containing u-boots LG-array linker section. This is included into
-# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
-$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
-$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT)
+$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \
-ansi -D__ASSEMBLY__ -P - <$< >$@
diff --git a/nand_spl/board/freescale/p1_p2_rdb/Makefile b/nand_spl/board/freescale/p1_p2_rdb/Makefile
index 9c77826..3a2a2d4 100644
--- a/nand_spl/board/freescale/p1_p2_rdb/Makefile
+++ b/nand_spl/board/freescale/p1_p2_rdb/Makefile
@@ -32,7 +32,6 @@ include $(TOPDIR)/config.mk
nandobj := $(OBJTREE)/nand_spl/
LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
-LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \
$(LDFLAGS) $(LDFLAGS_FINAL)
AFLAGS += -DCONFIG_NAND_SPL
@@ -62,11 +61,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds
-Map $(nandobj)u-boot-spl.map \
-o $(nandobj)u-boot-spl
-# The following line expands into whole rule which generates $(LSTSCRIPT),
-# the file containing u-boots LG-array linker section. This is included into
-# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
-$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
-$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT)
+$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \
-ansi -D__ASSEMBLY__ -P - <$< >$@
diff --git a/nand_spl/board/karo/tx25/Makefile b/nand_spl/board/karo/tx25/Makefile
index 82489d2..9f9c589 100644
--- a/nand_spl/board/karo/tx25/Makefile
+++ b/nand_spl/board/karo/tx25/Makefile
@@ -27,7 +27,6 @@ include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
nandobj := $(OBJTREE)/nand_spl/
LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
-LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \
$(LDFLAGS_FINAL)
AFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL
@@ -59,11 +58,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds
-Map $(nandobj)u-boot-spl.map \
-o $@
-# The following line expands into whole rule which generates $(LSTSCRIPT),
-# the file containing u-boots LG-array linker section. This is included into
-# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
-$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
-$(nandobj)u-boot.lds: $(LDSCRIPT) $(LSTSCRIPT)
+$(nandobj)u-boot.lds: $(LDSCRIPT)
$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \
-ansi -D__ASSEMBLY__ -P - <$< >$@
diff --git a/nand_spl/board/karo/tx25/u-boot.lds b/nand_spl/board/karo/tx25/u-boot.lds
index e047edb..4d1aac3 100644
--- a/nand_spl/board/karo/tx25/u-boot.lds
+++ b/nand_spl/board/karo/tx25/u-boot.lds
@@ -49,7 +49,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ *(SORT(.u_boot_list*));
}
. = ALIGN(4);
diff --git a/nand_spl/board/samsung/smdk6400/u-boot.lds b/nand_spl/board/samsung/smdk6400/u-boot.lds
index ae2bc4b..b6c573b 100644
--- a/nand_spl/board/samsung/smdk6400/u-boot.lds
+++ b/nand_spl/board/samsung/smdk6400/u-boot.lds
@@ -53,7 +53,7 @@ SECTIONS
. = ALIGN(4);
.u_boot_list : {
- #include <u-boot.lst>
+ *(SORT(.u_boot_list*));
}
. = ALIGN(4);
diff --git a/spl/.gitignore b/spl/.gitignore
index 8cf487e..7c88147 100644
--- a/spl/.gitignore
+++ b/spl/.gitignore
@@ -2,4 +2,3 @@ u-boot-spl
u-boot-spl.bin
u-boot-spl.lds
u-boot-spl.map
-u-boot.lst
diff --git a/spl/Makefile b/spl/Makefile
index 101d478..14095c8 100644
--- a/spl/Makefile
+++ b/spl/Makefile
@@ -81,6 +81,8 @@ LIBS-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/memory.o
LIBS-$(CONFIG_SPL_NET_SUPPORT) += net/libnet.o
LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/libnet.o
LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/phy/libphy.o
+LIBS-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += drivers/usb/musb-new/libusb_musb-new.o
+LIBS-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/libusb_gadget.o
ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
@@ -117,7 +119,7 @@ ifeq ($(wildcard $(LDSCRIPT)),)
LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot-spl.lds
endif
ifeq ($(wildcard $(LDSCRIPT)),)
- LDSCRIPT := $(TOPDIR)/arch/$(ARCH)/cpu/u-boot.lds
+ LDSCRIPT := $(TOPDIR)/arch/$(ARCH)/cpu/u-boot-spl.lds
endif
ifeq ($(wildcard $(LDSCRIPT)),)
$(error could not find linker script)
@@ -175,11 +177,7 @@ $(START): depend
$(LIBS): depend
$(MAKE) -C $(SRCTREE)$(dir $(subst $(SPLTREE),,$@))
-# The following line expands into whole rule which generates u-boot.lst,
-# the file containing u-boots LG-array linker section. This is included into
-# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
-$(eval $(call make_u_boot_list, $(obj)u-boot.lst, $(LIBS)))
-$(obj)u-boot-spl.lds: $(LDSCRIPT) $(obj)u-boot.lst depend
+$(obj)u-boot-spl.lds: $(LDSCRIPT) depend
$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj). -ansi -D__ASSEMBLY__ -P - < $< > $@
depend: $(obj).depend