summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/mips/cpu/mips32/cache.S90
-rw-r--r--arch/mips/cpu/mips32/cpu.c73
-rw-r--r--arch/mips/cpu/mips32/start.S2
-rw-r--r--arch/mips/include/asm/malta.h55
-rw-r--r--arch/mips/include/asm/mipsregs.h6
-rw-r--r--arch/mips/lib/bootm.c12
-rw-r--r--board/imgtec/malta/Makefile (renamed from board/qemu-malta/Makefile)3
-rw-r--r--board/imgtec/malta/flash-malta-boot.tcl40
-rw-r--r--board/imgtec/malta/lowlevel_init.S238
-rw-r--r--board/imgtec/malta/malta.c208
-rw-r--r--board/imgtec/malta/superio.c63
-rw-r--r--board/imgtec/malta/superio.h15
-rw-r--r--board/qemu-malta/lowlevel_init.S69
-rw-r--r--board/qemu-malta/qemu-malta.c47
-rw-r--r--boards.cfg4
-rw-r--r--doc/README.malta16
-rw-r--r--drivers/net/pcnet.c279
-rw-r--r--drivers/pci/Makefile1
-rw-r--r--drivers/pci/pci_msc01.c125
-rw-r--r--drivers/rtc/mc146818.c2
-rw-r--r--include/configs/malta.h (renamed from include/configs/qemu-malta.h)45
-rw-r--r--include/msc01.h135
-rw-r--r--include/pci.h6
-rw-r--r--include/pci_ids.h3
-rw-r--r--include/pci_msc01.h17
25 files changed, 1256 insertions, 298 deletions
diff --git a/arch/mips/cpu/mips32/cache.S b/arch/mips/cpu/mips32/cache.S
index 12f656c..22bd844 100644
--- a/arch/mips/cpu/mips32/cache.S
+++ b/arch/mips/cpu/mips32/cache.S
@@ -20,15 +20,6 @@
#define RA t9
-/*
- * 16kB is the maximum size of instruction and data caches on MIPS 4K,
- * 64kB is on 4KE, 24K, 5K, etc. Set bigger size for convenience.
- *
- * Note that the above size is the maximum size of primary cache. U-Boot
- * doesn't have L2 cache support for now.
- */
-#define MIPS_MAX_CACHE_SIZE 0x10000
-
#define INDEX_BASE CKSEG0
.macro cache_op op addr
@@ -126,12 +117,85 @@ LEAF(mips_init_dcache)
*/
NESTED(mips_cache_reset, 0, ra)
move RA, ra
- li t2, CONFIG_SYS_ICACHE_SIZE
- li t3, CONFIG_SYS_DCACHE_SIZE
+
+#if !defined(CONFIG_SYS_ICACHE_SIZE) || !defined(CONFIG_SYS_DCACHE_SIZE) || \
+ !defined(CONFIG_SYS_CACHELINE_SIZE)
+ /* read Config1 for use below */
+ mfc0 t5, CP0_CONFIG, 1
+#endif
+
+#ifdef CONFIG_SYS_CACHELINE_SIZE
+ li t7, CONFIG_SYS_CACHELINE_SIZE
li t8, CONFIG_SYS_CACHELINE_SIZE
+#else
+ /* Detect I-cache line size. */
+ srl t8, t5, MIPS_CONF1_IL_SHIFT
+ andi t8, t8, (MIPS_CONF1_IL >> MIPS_CONF1_IL_SHIFT)
+ beqz t8, 1f
+ li t6, 2
+ sllv t8, t6, t8
- li v0, MIPS_MAX_CACHE_SIZE
+1: /* Detect D-cache line size. */
+ srl t7, t5, MIPS_CONF1_DL_SHIFT
+ andi t7, t7, (MIPS_CONF1_DL >> MIPS_CONF1_DL_SHIFT)
+ beqz t7, 1f
+ li t6, 2
+ sllv t7, t6, t7
+1:
+#endif
+#ifdef CONFIG_SYS_ICACHE_SIZE
+ li t2, CONFIG_SYS_ICACHE_SIZE
+#else
+ /* Detect I-cache size. */
+ srl t6, t5, MIPS_CONF1_IS_SHIFT
+ andi t6, t6, (MIPS_CONF1_IS >> MIPS_CONF1_IS_SHIFT)
+ li t4, 32
+ xori t2, t6, 0x7
+ beqz t2, 1f
+ addi t6, t6, 1
+ sllv t4, t4, t6
+1: /* At this point t4 == I-cache sets. */
+ mul t2, t4, t8
+ srl t6, t5, MIPS_CONF1_IA_SHIFT
+ andi t6, t6, (MIPS_CONF1_IA >> MIPS_CONF1_IA_SHIFT)
+ addi t6, t6, 1
+ /* At this point t6 == I-cache ways. */
+ mul t2, t2, t6
+#endif
+
+#ifdef CONFIG_SYS_DCACHE_SIZE
+ li t3, CONFIG_SYS_DCACHE_SIZE
+#else
+ /* Detect D-cache size. */
+ srl t6, t5, MIPS_CONF1_DS_SHIFT
+ andi t6, t6, (MIPS_CONF1_DS >> MIPS_CONF1_DS_SHIFT)
+ li t4, 32
+ xori t3, t6, 0x7
+ beqz t3, 1f
+ addi t6, t6, 1
+ sllv t4, t4, t6
+1: /* At this point t4 == I-cache sets. */
+ mul t3, t4, t7
+ srl t6, t5, MIPS_CONF1_DA_SHIFT
+ andi t6, t6, (MIPS_CONF1_DA >> MIPS_CONF1_DA_SHIFT)
+ addi t6, t6, 1
+ /* At this point t6 == I-cache ways. */
+ mul t3, t3, t6
+#endif
+
+ /* Determine the largest L1 cache size */
+#if defined(CONFIG_SYS_ICACHE_SIZE) && defined(CONFIG_SYS_DCACHE_SIZE)
+#if CONFIG_SYS_ICACHE_SIZE > CONFIG_SYS_DCACHE_SIZE
+ li v0, CONFIG_SYS_ICACHE_SIZE
+#else
+ li v0, CONFIG_SYS_DCACHE_SIZE
+#endif
+#else
+ move v0, t2
+ sltu t1, t2, t3
+ movn v0, t3, t1
+#endif
/*
* Now clear that much memory starting from zero.
*/
@@ -163,7 +227,7 @@ NESTED(mips_cache_reset, 0, ra)
* then initialize D-cache.
*/
move a1, t3
- move a2, t8
+ move a2, t7
PTR_LA v1, mips_init_dcache
jalr v1
diff --git a/arch/mips/cpu/mips32/cpu.c b/arch/mips/cpu/mips32/cpu.c
index 28d5c45..278865b 100644
--- a/arch/mips/cpu/mips32/cpu.c
+++ b/arch/mips/cpu/mips32/cpu.c
@@ -34,28 +34,89 @@ int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
return 0;
}
+#ifdef CONFIG_SYS_CACHELINE_SIZE
+
+static inline unsigned long icache_line_size(void)
+{
+ return CONFIG_SYS_CACHELINE_SIZE;
+}
+
+static inline unsigned long dcache_line_size(void)
+{
+ return CONFIG_SYS_CACHELINE_SIZE;
+}
+
+#else /* !CONFIG_SYS_CACHELINE_SIZE */
+
+static inline unsigned long icache_line_size(void)
+{
+ unsigned long conf1, il;
+ conf1 = read_c0_config1();
+ il = (conf1 & MIPS_CONF1_IL) >> MIPS_CONF1_IL_SHIFT;
+ if (!il)
+ return 0;
+ return 2 << il;
+}
+
+static inline unsigned long dcache_line_size(void)
+{
+ unsigned long conf1, dl;
+ conf1 = read_c0_config1();
+ dl = (conf1 & MIPS_CONF1_DL) >> MIPS_CONF1_DL_SHIFT;
+ if (!dl)
+ return 0;
+ return 2 << dl;
+}
+
+#endif /* !CONFIG_SYS_CACHELINE_SIZE */
+
void flush_cache(ulong start_addr, ulong size)
{
- unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE;
- unsigned long addr = start_addr & ~(lsize - 1);
- unsigned long aend = (start_addr + size - 1) & ~(lsize - 1);
+ unsigned long ilsize = icache_line_size();
+ unsigned long dlsize = dcache_line_size();
+ unsigned long addr, aend;
/* aend will be miscalculated when size is zero, so we return here */
if (size == 0)
return;
+ addr = start_addr & ~(dlsize - 1);
+ aend = (start_addr + size - 1) & ~(dlsize - 1);
+
+ if (ilsize == dlsize) {
+ /* flush I-cache & D-cache simultaneously */
+ while (1) {
+ cache_op(HIT_WRITEBACK_INV_D, addr);
+ cache_op(HIT_INVALIDATE_I, addr);
+ if (addr == aend)
+ break;
+ addr += dlsize;
+ }
+ return;
+ }
+
+ /* flush D-cache */
while (1) {
cache_op(HIT_WRITEBACK_INV_D, addr);
+ if (addr == aend)
+ break;
+ addr += dlsize;
+ }
+
+ /* flush I-cache */
+ addr = start_addr & ~(ilsize - 1);
+ aend = (start_addr + size - 1) & ~(ilsize - 1);
+ while (1) {
cache_op(HIT_INVALIDATE_I, addr);
if (addr == aend)
break;
- addr += lsize;
+ addr += ilsize;
}
}
void flush_dcache_range(ulong start_addr, ulong stop)
{
- unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE;
+ unsigned long lsize = dcache_line_size();
unsigned long addr = start_addr & ~(lsize - 1);
unsigned long aend = (stop - 1) & ~(lsize - 1);
@@ -69,7 +130,7 @@ void flush_dcache_range(ulong start_addr, ulong stop)
void invalidate_dcache_range(ulong start_addr, ulong stop)
{
- unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE;
+ unsigned long lsize = dcache_line_size();
unsigned long addr = start_addr & ~(lsize - 1);
unsigned long aend = (stop - 1) & ~(lsize - 1);
diff --git a/arch/mips/cpu/mips32/start.S b/arch/mips/cpu/mips32/start.S
index 70ad198..68e59b5 100644
--- a/arch/mips/cpu/mips32/start.S
+++ b/arch/mips/cpu/mips32/start.S
@@ -51,7 +51,7 @@ _start:
*/
.word CONFIG_SYS_XWAY_EBU_BOOTCFG
.word 0x0
-#elif defined(CONFIG_QEMU_MALTA)
+#elif defined(CONFIG_MALTA)
/*
* Linux expects the Board ID here.
*/
diff --git a/arch/mips/include/asm/malta.h b/arch/mips/include/asm/malta.h
index d4d44a2..9b1100b 100644
--- a/arch/mips/include/asm/malta.h
+++ b/arch/mips/include/asm/malta.h
@@ -1,23 +1,60 @@
/*
* Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2013 Imagination Technologies
*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
+ * SPDX-License-Identifier: GPL-2.0
*/
#ifndef _MIPS_ASM_MALTA_H
#define _MIPS_ASM_MALTA_H
-#define MALTA_IO_PORT_BASE 0x18000000
+#define MALTA_GT_BASE 0x1be00000
+#define MALTA_GT_PCIIO_BASE 0x18000000
+#define MALTA_GT_UART0_BASE (MALTA_GT_PCIIO_BASE + 0x3f8)
-#define MALTA_UART_BASE (MALTA_IO_PORT_BASE + 0x3f8)
+#define MALTA_MSC01_BIU_BASE 0x1bc80000
+#define MALTA_MSC01_PCI_BASE 0x1bd00000
+#define MALTA_MSC01_PBC_BASE 0x1bd40000
+#define MALTA_MSC01_IP1_BASE 0x1bc00000
+#define MALTA_MSC01_IP1_SIZE 0x00400000
+#define MALTA_MSC01_IP2_BASE1 0x10000000
+#define MALTA_MSC01_IP2_SIZE1 0x08000000
+#define MALTA_MSC01_IP2_BASE2 0x18000000
+#define MALTA_MSC01_IP2_SIZE2 0x04000000
+#define MALTA_MSC01_IP3_BASE 0x1c000000
+#define MALTA_MSC01_IP3_SIZE 0x04000000
+#define MALTA_MSC01_PCIMEM_BASE 0x10000000
+#define MALTA_MSC01_PCIMEM_SIZE 0x10000000
+#define MALTA_MSC01_PCIMEM_MAP 0x10000000
+#define MALTA_MSC01_PCIIO_BASE 0x1b000000
+#define MALTA_MSC01_PCIIO_SIZE 0x00800000
+#define MALTA_MSC01_PCIIO_MAP 0x00000000
+#define MALTA_MSC01_UART0_BASE (MALTA_MSC01_PCIIO_BASE + 0x3f8)
-#define MALTA_GT_BASE 0x1be00000
+#define MALTA_ASCIIWORD 0x1f000410
+#define MALTA_ASCIIPOS0 0x1f000418
+#define MALTA_ASCIIPOS1 0x1f000420
+#define MALTA_ASCIIPOS2 0x1f000428
+#define MALTA_ASCIIPOS3 0x1f000430
+#define MALTA_ASCIIPOS4 0x1f000438
+#define MALTA_ASCIIPOS5 0x1f000440
+#define MALTA_ASCIIPOS6 0x1f000448
+#define MALTA_ASCIIPOS7 0x1f000450
-#define MALTA_RESET_BASE 0x1f000500
-#define GORESET 0x42
+#define MALTA_RESET_BASE 0x1f000500
+#define GORESET 0x42
-#define MALTA_FLASH_BASE 0x1fc00000
+#define MALTA_FLASH_BASE 0x1fc00000
+
+#define MALTA_REVISION 0x1fc00010
+#define MALTA_REVISION_CORID_SHF 10
+#define MALTA_REVISION_CORID_MSK (0x3f << MALTA_REVISION_CORID_SHF)
+#define MALTA_REVISION_CORID_CORE_LV 1
+#define MALTA_REVISION_CORID_CORE_FPGA6 14
+
+#define PCI_CFG_PIIX4_PIRQRCA 0x60
+#define PCI_CFG_PIIX4_PIRQRCB 0x61
+#define PCI_CFG_PIIX4_PIRQRCC 0x62
+#define PCI_CFG_PIIX4_PIRQRCD 0x63
#endif /* _MIPS_ASM_MALTA_H */
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index be7e5c6..3571e4f 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -494,11 +494,17 @@
#define MIPS_CONF1_PC (_ULCAST_(1) << 4)
#define MIPS_CONF1_MD (_ULCAST_(1) << 5)
#define MIPS_CONF1_C2 (_ULCAST_(1) << 6)
+#define MIPS_CONF1_DA_SHIFT 7
#define MIPS_CONF1_DA (_ULCAST_(7) << 7)
+#define MIPS_CONF1_DL_SHIFT 10
#define MIPS_CONF1_DL (_ULCAST_(7) << 10)
+#define MIPS_CONF1_DS_SHIFT 13
#define MIPS_CONF1_DS (_ULCAST_(7) << 13)
+#define MIPS_CONF1_IA_SHIFT 16
#define MIPS_CONF1_IA (_ULCAST_(7) << 16)
+#define MIPS_CONF1_IL_SHIFT 19
#define MIPS_CONF1_IL (_ULCAST_(7) << 19)
+#define MIPS_CONF1_IS_SHIFT 22
#define MIPS_CONF1_IS (_ULCAST_(7) << 22)
#define MIPS_CONF1_TLBS (_ULCAST_(63)<< 25)
diff --git a/arch/mips/lib/bootm.c b/arch/mips/lib/bootm.c
index 66340ea..1febf29 100644
--- a/arch/mips/lib/bootm.c
+++ b/arch/mips/lib/bootm.c
@@ -17,10 +17,10 @@ DECLARE_GLOBAL_DATA_PTR;
#define LINUX_MAX_ENVS 256
#define LINUX_MAX_ARGS 256
-#if defined(CONFIG_QEMU_MALTA)
-#define mips_boot_qemu_malta 1
+#if defined(CONFIG_MALTA)
+#define mips_boot_malta 1
#else
-#define mips_boot_qemu_malta 0
+#define mips_boot_malta 0
#endif
static int linux_argc;
@@ -139,7 +139,7 @@ static void linux_env_set(const char *env_name, const char *env_val)
strcpy(linux_env_p, env_name);
linux_env_p += strlen(env_name);
- if (mips_boot_qemu_malta) {
+ if (mips_boot_malta) {
linux_env_p++;
linux_env[++linux_env_idx] = linux_env_p;
} else {
@@ -196,7 +196,7 @@ static void boot_prep_linux(bootm_headers_t *images)
if (cp)
linux_env_set("eth1addr", cp);
- if (mips_boot_qemu_malta)
+ if (mips_boot_malta)
linux_env_set("modetty0", "38400n8r");
}
@@ -210,7 +210,7 @@ static void boot_jump_linux(bootm_headers_t *images)
bootstage_mark(BOOTSTAGE_ID_RUN_OS);
- if (mips_boot_qemu_malta)
+ if (mips_boot_malta)
linux_extra = gd->ram_size;
/* we assume that the kernel is in place */
diff --git a/board/qemu-malta/Makefile b/board/imgtec/malta/Makefile
index 5d727f6..19dd3a3 100644
--- a/board/qemu-malta/Makefile
+++ b/board/imgtec/malta/Makefile
@@ -5,5 +5,6 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y = qemu-malta.o
+obj-y = malta.o
obj-y += lowlevel_init.o
+obj-y += superio.o
diff --git a/board/imgtec/malta/flash-malta-boot.tcl b/board/imgtec/malta/flash-malta-boot.tcl
new file mode 100644
index 0000000..0eedf07
--- /dev/null
+++ b/board/imgtec/malta/flash-malta-boot.tcl
@@ -0,0 +1,40 @@
+#
+# Copyright (C) 2013 Imagination Technologies
+#
+# Programs a MIPS Malta boot flash with a flat binary image.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+proc flash-boot { binfile } {
+ puts "flash monitor binary $binfile"
+ config Coherent on
+ config CoherencyDuringLoad on
+
+ if {[endian]=="big"} {
+ puts "CPU in BE mode"
+ flash device sharp_16x32_be;
+ } else {
+ puts "CPU in LE mode"
+ flash device sharp_16x32;
+ }
+
+ flash clear all;
+ flash set 0xBE000000..0xBE0FFFFF
+ flash erase sector 0xbe000000;
+ flash erase sector 0xbe020000;
+ flash erase sector 0xbe040000;
+ flash erase sector 0xbe060000;
+ flash erase sector 0xbe080000;
+ flash erase sector 0xbe0a0000;
+ flash erase sector 0xbe0c0000;
+ flash erase sector 0xbe0e0000;
+ puts "finished erasing boot flash";
+
+ puts "programming flash, please be patient"
+ load bin 0xbe000000 $binfile size4
+
+ flash clear all
+ config CoherencyDuringLoad off
+ puts "finished programming boot flash";
+}
diff --git a/board/imgtec/malta/lowlevel_init.S b/board/imgtec/malta/lowlevel_init.S
new file mode 100644
index 0000000..ae09c27
--- /dev/null
+++ b/board/imgtec/malta/lowlevel_init.S
@@ -0,0 +1,238 @@
+/*
+ * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <config.h>
+#include <gt64120.h>
+#include <msc01.h>
+#include <pci.h>
+
+#include <asm/addrspace.h>
+#include <asm/regdef.h>
+#include <asm/malta.h>
+#include <asm/mipsregs.h>
+
+#ifdef CONFIG_SYS_BIG_ENDIAN
+#define CPU_TO_GT32(_x) ((_x))
+#else
+#define CPU_TO_GT32(_x) ( \
+ (((_x) & 0xff) << 24) | (((_x) & 0xff00) << 8) | \
+ (((_x) & 0xff0000) >> 8) | (((_x) & 0xff000000) >> 24))
+#endif
+
+ .text
+ .set noreorder
+ .set mips32
+
+ .globl lowlevel_init
+lowlevel_init:
+ /* disable any L2 cache for now */
+ sync
+ mfc0 t0, CP0_CONFIG, 2
+ ori t0, t0, 0x1 << 12
+ mtc0 t0, CP0_CONFIG, 2
+
+ /* detect the core card */
+ li t0, KSEG1ADDR(MALTA_REVISION)
+ lw t0, 0(t0)
+ srl t0, t0, MALTA_REVISION_CORID_SHF
+ andi t0, t0, (MALTA_REVISION_CORID_MSK >> \
+ MALTA_REVISION_CORID_SHF)
+
+ /* core cards using the gt64120 system controller */
+ li t1, MALTA_REVISION_CORID_CORE_LV
+ beq t0, t1, _gt64120
+
+ /* core cards using the MSC01 system controller */
+ li t1, MALTA_REVISION_CORID_CORE_FPGA6
+ beq t0, t1, _msc01
+ nop
+
+ /* unknown system controller */
+ b .
+ nop
+
+ /*
+ * Load BAR registers of GT64120 as done by YAMON
+ *
+ * based on a patch sent by Antony Pavlov <antonynpavlov@gmail.com>
+ * to the barebox mailing list.
+ * The subject of the original patch:
+ * 'MIPS: qemu-malta: add YAMON-style GT64120 memory map'
+ * URL:
+ * http://www.mail-archive.com/barebox@lists.infradead.org/msg06128.html
+ *
+ * based on write_bootloader() in qemu.git/hw/mips_malta.c
+ * see GT64120 manual and qemu.git/hw/gt64xxx.c for details
+ */
+_gt64120:
+ /* move GT64120 registers from 0x14000000 to 0x1be00000 */
+ li t1, KSEG1ADDR(GT_DEF_BASE)
+ li t0, CPU_TO_GT32(0xdf000000)
+ sw t0, GT_ISD_OFS(t1)
+
+ /* setup MEM-to-PCI0 mapping */
+ li t1, KSEG1ADDR(MALTA_GT_BASE)
+
+ /* setup PCI0 io window to 0x18000000-0x181fffff */
+ li t0, CPU_TO_GT32(0xc0000000)
+ sw t0, GT_PCI0IOLD_OFS(t1)
+ li t0, CPU_TO_GT32(0x40000000)
+ sw t0, GT_PCI0IOHD_OFS(t1)
+
+ /* setup PCI0 mem windows */
+ li t0, CPU_TO_GT32(0x80000000)
+ sw t0, GT_PCI0M0LD_OFS(t1)
+ li t0, CPU_TO_GT32(0x3f000000)
+ sw t0, GT_PCI0M0HD_OFS(t1)
+
+ li t0, CPU_TO_GT32(0xc1000000)
+ sw t0, GT_PCI0M1LD_OFS(t1)
+ li t0, CPU_TO_GT32(0x5e000000)
+ sw t0, GT_PCI0M1HD_OFS(t1)
+
+ jr ra
+ nop
+
+ /*
+ *
+ */
+_msc01:
+ /* setup peripheral bus controller clock divide */
+ li t0, KSEG1ADDR(MALTA_MSC01_PBC_BASE)
+ li t1, 0x1 << MSC01_PBC_CLKCFG_SHF
+ sw t1, MSC01_PBC_CLKCFG_OFS(t0)
+
+ /* tweak peripheral bus controller timings */
+ li t1, (0x1 << MSC01_PBC_CS0TIM_CDT_SHF) | \
+ (0x1 << MSC01_PBC_CS0TIM_CAT_SHF)
+ sw t1, MSC01_PBC_CS0TIM_OFS(t0)
+ li t1, (0x0 << MSC01_PBC_CS0RW_RDT_SHF) | \
+ (0x2 << MSC01_PBC_CS0RW_RAT_SHF) | \
+ (0x0 << MSC01_PBC_CS0RW_WDT_SHF) | \
+ (0x2 << MSC01_PBC_CS0RW_WAT_SHF)
+ sw t1, MSC01_PBC_CS0RW_OFS(t0)
+ lw t1, MSC01_PBC_CS0CFG_OFS(t0)
+ li t2, MSC01_PBC_CS0CFG_DTYP_MSK
+ and t1, t2
+ ori t1, (0x0 << MSC01_PBC_CS0CFG_ADM_SHF) | \
+ (0x3 << MSC01_PBC_CS0CFG_WSIDLE_SHF) | \
+ (0x10 << MSC01_PBC_CS0CFG_WS_SHF)
+ sw t1, MSC01_PBC_CS0CFG_OFS(t0)
+
+ /* setup basic address decode */
+ li t0, KSEG1ADDR(MALTA_MSC01_BIU_BASE)
+ li t1, 0x0
+ li t2, -CONFIG_SYS_MEM_SIZE
+ sw t1, MSC01_BIU_MCBAS1L_OFS(t0)
+ sw t2, MSC01_BIU_MCMSK1L_OFS(t0)
+ sw t1, MSC01_BIU_MCBAS2L_OFS(t0)
+ sw t2, MSC01_BIU_MCMSK2L_OFS(t0)
+
+ /* initialise IP1 - unused */
+ li t1, MALTA_MSC01_IP1_BASE
+ li t2, -MALTA_MSC01_IP1_SIZE
+ sw t1, MSC01_BIU_IP1BAS1L_OFS(t0)
+ sw t2, MSC01_BIU_IP1MSK1L_OFS(t0)
+ sw t1, MSC01_BIU_IP1BAS2L_OFS(t0)
+ sw t2, MSC01_BIU_IP1MSK2L_OFS(t0)
+
+ /* initialise IP2 - PCI */
+ li t1, MALTA_MSC01_IP2_BASE1
+ li t2, -MALTA_MSC01_IP2_SIZE1
+ sw t1, MSC01_BIU_IP2BAS1L_OFS(t0)
+ sw t2, MSC01_BIU_IP2MSK1L_OFS(t0)
+ li t1, MALTA_MSC01_IP2_BASE2
+ li t2, -MALTA_MSC01_IP2_SIZE2
+ sw t1, MSC01_BIU_IP2BAS2L_OFS(t0)
+ sw t2, MSC01_BIU_IP2MSK2L_OFS(t0)
+
+ /* initialise IP3 - peripheral bus controller */
+ li t1, MALTA_MSC01_IP3_BASE
+ li t2, -MALTA_MSC01_IP3_SIZE
+ sw t1, MSC01_BIU_IP3BAS1L_OFS(t0)
+ sw t2, MSC01_BIU_IP3MSK1L_OFS(t0)
+ sw t1, MSC01_BIU_IP3BAS2L_OFS(t0)
+ sw t2, MSC01_BIU_IP3MSK2L_OFS(t0)
+
+ /* setup PCI memory */
+ li t0, KSEG1ADDR(MALTA_MSC01_PCI_BASE)
+ li t1, MALTA_MSC01_PCIMEM_BASE
+ li t2, (-MALTA_MSC01_PCIMEM_SIZE) & MSC01_PCI_SC2PMMSKL_MSK_MSK
+ li t3, MALTA_MSC01_PCIMEM_MAP
+ sw t1, MSC01_PCI_SC2PMBASL_OFS(t0)
+ sw t2, MSC01_PCI_SC2PMMSKL_OFS(t0)
+ sw t3, MSC01_PCI_SC2PMMAPL_OFS(t0)
+
+ /* setup PCI I/O */
+ li t1, MALTA_MSC01_PCIIO_BASE
+ li t2, (-MALTA_MSC01_PCIIO_SIZE) & MSC01_PCI_SC2PIOMSKL_MSK_MSK
+ li t3, MALTA_MSC01_PCIIO_MAP
+ sw t1, MSC01_PCI_SC2PIOBASL_OFS(t0)
+ sw t2, MSC01_PCI_SC2PIOMSKL_OFS(t0)
+ sw t3, MSC01_PCI_SC2PIOMAPL_OFS(t0)
+
+ /* setup PCI_BAR0 memory window */
+ li t1, -CONFIG_SYS_MEM_SIZE
+ sw t1, MSC01_PCI_BAR0_OFS(t0)
+
+ /* setup PCI to SysCon/CPU translation */
+ sw t1, MSC01_PCI_P2SCMSKL_OFS(t0)
+ sw zero, MSC01_PCI_P2SCMAPL_OFS(t0)
+
+ /* setup PCI vendor & device IDs */
+ li t1, (PCI_VENDOR_ID_MIPS << MSC01_PCI_HEAD0_VENDORID_SHF) | \
+ (PCI_DEVICE_ID_MIPS_MSC01 << MSC01_PCI_HEAD0_DEVICEID_SHF)
+ sw t1, MSC01_PCI_HEAD0_OFS(t0)
+
+ /* setup PCI subsystem vendor & device IDs */
+ sw t1, MSC01_PCI_HEAD11_OFS(t0)
+
+ /* setup PCI class, revision */
+ li t1, (PCI_CLASS_BRIDGE_HOST << MSC01_PCI_HEAD2_CLASS_SHF) | \
+ (0x1 << MSC01_PCI_HEAD2_REV_SHF)
+ sw t1, MSC01_PCI_HEAD2_OFS(t0)
+
+ /* ensure a sane setup */
+ sw zero, MSC01_PCI_HEAD3_OFS(t0)
+ sw zero, MSC01_PCI_HEAD4_OFS(t0)
+ sw zero, MSC01_PCI_HEAD5_OFS(t0)
+ sw zero, MSC01_PCI_HEAD6_OFS(t0)
+ sw zero, MSC01_PCI_HEAD7_OFS(t0)
+ sw zero, MSC01_PCI_HEAD8_OFS(t0)
+ sw zero, MSC01_PCI_HEAD9_OFS(t0)
+ sw zero, MSC01_PCI_HEAD10_OFS(t0)
+ sw zero, MSC01_PCI_HEAD12_OFS(t0)
+ sw zero, MSC01_PCI_HEAD13_OFS(t0)
+ sw zero, MSC01_PCI_HEAD14_OFS(t0)
+ sw zero, MSC01_PCI_HEAD15_OFS(t0)
+
+ /* setup PCI command register */
+ li t1, (PCI_COMMAND_FAST_BACK | \
+ PCI_COMMAND_SERR | \
+ PCI_COMMAND_PARITY | \
+ PCI_COMMAND_MASTER | \
+ PCI_COMMAND_MEMORY)
+ sw t1, MSC01_PCI_HEAD1_OFS(t0)
+
+ /* setup PCI byte swapping */
+#ifdef CONFIG_SYS_BIG_ENDIAN
+ li t1, (0x1 << MSC01_PCI_SWAP_BAR0_BSWAP_SHF) | \
+ (0x1 << MSC01_PCI_SWAP_IO_BSWAP_SHF)
+ sw t1, MSC01_PCI_SWAP_OFS(t0)
+#else
+ sw zero, MSC01_PCI_SWAP_OFS(t0)
+#endif
+
+ /* enable PCI host configuration cycles */
+ lw t1, MSC01_PCI_CFG_OFS(t0)
+ li t2, MSC01_PCI_CFG_RA_MSK | \
+ MSC01_PCI_CFG_G_MSK | \
+ MSC01_PCI_CFG_EN_MSK
+ or t1, t1, t2
+ sw t1, MSC01_PCI_CFG_OFS(t0)
+
+ jr ra
+ nop
diff --git a/board/imgtec/malta/malta.c b/board/imgtec/malta/malta.c
new file mode 100644
index 0000000..a1a4c01
--- /dev/null
+++ b/board/imgtec/malta/malta.c
@@ -0,0 +1,208 @@
+/*
+ * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2013 Imagination Technologies
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <pci.h>
+#include <pci_gt64120.h>
+#include <pci_msc01.h>
+#include <rtc.h>
+#include <serial.h>
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/malta.h>
+
+#include "superio.h"
+
+enum core_card {
+ CORE_UNKNOWN,
+ CORE_LV,
+ CORE_FPGA6,
+};
+
+enum sys_con {
+ SYSCON_UNKNOWN,
+ SYSCON_GT64120,
+ SYSCON_MSC01,
+};
+
+static void malta_lcd_puts(const char *str)
+{
+ int i;
+ void *reg = (void *)CKSEG1ADDR(MALTA_ASCIIPOS0);
+
+ /* print up to 8 characters of the string */
+ for (i = 0; i < min(strlen(str), 8); i++) {
+ __raw_writel(str[i], reg);
+ reg += MALTA_ASCIIPOS1 - MALTA_ASCIIPOS0;
+ }
+
+ /* fill the rest of the display with spaces */
+ for (; i < 8; i++) {
+ __raw_writel(' ', reg);
+ reg += MALTA_ASCIIPOS1 - MALTA_ASCIIPOS0;
+ }
+}
+
+static enum core_card malta_core_card(void)
+{
+ u32 corid, rev;
+
+ rev = __raw_readl(CKSEG1ADDR(MALTA_REVISION));
+ corid = (rev & MALTA_REVISION_CORID_MSK) >> MALTA_REVISION_CORID_SHF;
+
+ switch (corid) {
+ case MALTA_REVISION_CORID_CORE_LV:
+ return CORE_LV;
+
+ case MALTA_REVISION_CORID_CORE_FPGA6:
+ return CORE_FPGA6;
+
+ default:
+ return CORE_UNKNOWN;
+ }
+}
+
+static enum sys_con malta_sys_con(void)
+{
+ switch (malta_core_card()) {
+ case CORE_LV:
+ return SYSCON_GT64120;
+
+ case CORE_FPGA6:
+ return SYSCON_MSC01;
+
+ default:
+ return SYSCON_UNKNOWN;
+ }
+}
+
+phys_size_t initdram(int board_type)
+{
+ return CONFIG_SYS_MEM_SIZE;
+}
+
+int checkboard(void)
+{
+ enum core_card core;
+
+ malta_lcd_puts("U-boot");
+ puts("Board: MIPS Malta");
+
+ core = malta_core_card();
+ switch (core) {
+ case CORE_LV:
+ puts(" CoreLV");
+ break;
+
+ case CORE_FPGA6:
+ puts(" CoreFPGA6");
+ break;
+
+ default:
+ puts(" CoreUnknown");
+ }
+
+ putc('\n');
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ return pci_eth_init(bis);
+}
+
+void _machine_restart(void)
+{
+ void __iomem *reset_base;
+
+ reset_base = (void __iomem *)CKSEG1ADDR(MALTA_RESET_BASE);
+ __raw_writel(GORESET, reset_base);
+}
+
+int board_early_init_f(void)
+{
+ void *io_base;
+
+ /* choose correct PCI I/O base */
+ switch (malta_sys_con()) {
+ case SYSCON_GT64120:
+ io_base = (void *)CKSEG1ADDR(MALTA_GT_PCIIO_BASE);
+ break;
+
+ case SYSCON_MSC01:
+ io_base = (void *)CKSEG1ADDR(MALTA_MSC01_PCIIO_BASE);
+ break;
+
+ default:
+ return -1;
+ }
+
+ /* setup FDC37M817 super I/O controller */
+ malta_superio_init(io_base);
+
+ return 0;
+}
+
+int misc_init_r(void)
+{
+ rtc_reset();
+
+ return 0;
+}
+
+struct serial_device *default_serial_console(void)
+{
+ switch (malta_sys_con()) {
+ case SYSCON_GT64120:
+ return &eserial1_device;
+
+ default:
+ case SYSCON_MSC01:
+ return &eserial2_device;
+ }
+}
+
+void pci_init_board(void)
+{
+ pci_dev_t bdf;
+
+ switch (malta_sys_con()) {
+ case SYSCON_GT64120:
+ set_io_port_base(CKSEG1ADDR(MALTA_GT_PCIIO_BASE));
+
+ gt64120_pci_init((void *)CKSEG1ADDR(MALTA_GT_BASE),
+ 0x00000000, 0x00000000, CONFIG_SYS_MEM_SIZE,
+ 0x10000000, 0x10000000, 128 * 1024 * 1024,
+ 0x00000000, 0x00000000, 0x20000);
+ break;
+
+ default:
+ case SYSCON_MSC01:
+ set_io_port_base(CKSEG1ADDR(MALTA_MSC01_PCIIO_BASE));
+
+ msc01_pci_init((void *)CKSEG1ADDR(MALTA_MSC01_PCI_BASE),
+ 0x00000000, 0x00000000, CONFIG_SYS_MEM_SIZE,
+ MALTA_MSC01_PCIMEM_MAP,
+ CKSEG1ADDR(MALTA_MSC01_PCIMEM_BASE),
+ MALTA_MSC01_PCIMEM_SIZE, MALTA_MSC01_PCIIO_MAP,
+ 0x00000000, MALTA_MSC01_PCIIO_SIZE);
+ break;
+ }
+
+ bdf = pci_find_device(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_82371AB_0, 0);
+ if (bdf == -1)
+ panic("Failed to find PIIX4 PCI bridge\n");
+
+ /* setup PCI interrupt routing */
+ pci_write_config_byte(bdf, PCI_CFG_PIIX4_PIRQRCA, 10);
+ pci_write_config_byte(bdf, PCI_CFG_PIIX4_PIRQRCB, 10);
+ pci_write_config_byte(bdf, PCI_CFG_PIIX4_PIRQRCC, 11);
+ pci_write_config_byte(bdf, PCI_CFG_PIIX4_PIRQRCD, 11);
+}
diff --git a/board/imgtec/malta/superio.c b/board/imgtec/malta/superio.c
new file mode 100644
index 0000000..eaa14df
--- /dev/null
+++ b/board/imgtec/malta/superio.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2013 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * Setup code for the FDC37M817 super I/O controller
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+#define SIO_CONF_PORT 0x3f0
+#define SIO_DATA_PORT 0x3f1
+
+enum sio_conf_key {
+ SIOCONF_DEVNUM = 0x07,
+ SIOCONF_ACTIVATE = 0x30,
+ SIOCONF_ENTER_SETUP = 0x55,
+ SIOCONF_BASE_HIGH = 0x60,
+ SIOCONF_BASE_LOW = 0x61,
+ SIOCONF_PRIMARY_INT = 0x70,
+ SIOCONF_EXIT_SETUP = 0xaa,
+ SIOCONF_MODE = 0xf0,
+};
+
+static struct {
+ u8 key;
+ u8 data;
+} sio_config[] = {
+ /* tty0 */
+ { SIOCONF_DEVNUM, 0x04 },
+ { SIOCONF_BASE_HIGH, 0x03 },
+ { SIOCONF_BASE_LOW, 0xf8 },
+ { SIOCONF_MODE, 0x02 },
+ { SIOCONF_PRIMARY_INT, 0x04 },
+ { SIOCONF_ACTIVATE, 0x01 },
+
+ /* tty1 */
+ { SIOCONF_DEVNUM, 0x05 },
+ { SIOCONF_BASE_HIGH, 0x02 },
+ { SIOCONF_BASE_LOW, 0xf8 },
+ { SIOCONF_MODE, 0x02 },
+ { SIOCONF_PRIMARY_INT, 0x03 },
+ { SIOCONF_ACTIVATE, 0x01 },
+};
+
+void malta_superio_init(void *io_base)
+{
+ unsigned i;
+
+ /* enter config state */
+ writeb(SIOCONF_ENTER_SETUP, io_base + SIO_CONF_PORT);
+
+ /* configure peripherals */
+ for (i = 0; i < ARRAY_SIZE(sio_config); i++) {
+ writeb(sio_config[i].key, io_base + SIO_CONF_PORT);
+ writeb(sio_config[i].data, io_base + SIO_DATA_PORT);
+ }
+
+ /* exit config state */
+ writeb(SIOCONF_EXIT_SETUP, io_base + SIO_CONF_PORT);
+}
diff --git a/board/imgtec/malta/superio.h b/board/imgtec/malta/superio.h
new file mode 100644
index 0000000..1450da5
--- /dev/null
+++ b/board/imgtec/malta/superio.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2013 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * Setup code for the FDC37M817 super I/O controller
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __BOARD_MALTA_SUPERIO_H__
+#define __BOARD_MALTA_SUPERIO_H__
+
+extern void malta_superio_init(void *io_base);
+
+#endif /* __BOARD_MALTA_SUPERIO_H__ */
diff --git a/board/qemu-malta/lowlevel_init.S b/board/qemu-malta/lowlevel_init.S
deleted file mode 100644
index fa0b6a7..0000000
--- a/board/qemu-malta/lowlevel_init.S
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
- *
- * SPDX-License-Identifier: GPL-2.0
- */
-
-#include <config.h>
-#include <gt64120.h>
-
-#include <asm/addrspace.h>
-#include <asm/regdef.h>
-#include <asm/malta.h>
-
-#ifdef CONFIG_SYS_BIG_ENDIAN
-#define CPU_TO_GT32(_x) ((_x))
-#else
-#define CPU_TO_GT32(_x) ( \
- (((_x) & 0xff) << 24) | (((_x) & 0xff00) << 8) | \
- (((_x) & 0xff0000) >> 8) | (((_x) & 0xff000000) >> 24))
-#endif
-
- .text
- .set noreorder
- .set mips32
-
- .globl lowlevel_init
-lowlevel_init:
-
- /*
- * Load BAR registers of GT64120 as done by YAMON
- *
- * based on a patch sent by Antony Pavlov <antonynpavlov@gmail.com>
- * to the barebox mailing list.
- * The subject of the original patch:
- * 'MIPS: qemu-malta: add YAMON-style GT64120 memory map'
- * URL:
- * http://www.mail-archive.com/barebox@lists.infradead.org/msg06128.html
- *
- * based on write_bootloader() in qemu.git/hw/mips_malta.c
- * see GT64120 manual and qemu.git/hw/gt64xxx.c for details
- */
-
- /* move GT64120 registers from 0x14000000 to 0x1be00000 */
- li t1, KSEG1ADDR(GT_DEF_BASE)
- li t0, CPU_TO_GT32(0xdf000000)
- sw t0, GT_ISD_OFS(t1)
-
- /* setup MEM-to-PCI0 mapping */
- li t1, KSEG1ADDR(MALTA_GT_BASE)
-
- /* setup PCI0 io window to 0x18000000-0x181fffff */
- li t0, CPU_TO_GT32(0xc0000000)
- sw t0, GT_PCI0IOLD_OFS(t1)
- li t0, CPU_TO_GT32(0x40000000)
- sw t0, GT_PCI0IOHD_OFS(t1)
-
- /* setup PCI0 mem windows */
- li t0, CPU_TO_GT32(0x80000000)
- sw t0, GT_PCI0M0LD_OFS(t1)
- li t0, CPU_TO_GT32(0x3f000000)
- sw t0, GT_PCI0M0HD_OFS(t1)
-
- li t0, CPU_TO_GT32(0xc1000000)
- sw t0, GT_PCI0M1LD_OFS(t1)
- li t0, CPU_TO_GT32(0x5e000000)
- sw t0, GT_PCI0M1HD_OFS(t1)
-
- jr ra
- nop
diff --git a/board/qemu-malta/qemu-malta.c b/board/qemu-malta/qemu-malta.c
deleted file mode 100644
index 7eddf1c..0000000
--- a/board/qemu-malta/qemu-malta.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
- *
- * SPDX-License-Identifier: GPL-2.0
- */
-
-#include <common.h>
-#include <netdev.h>
-
-#include <asm/addrspace.h>
-#include <asm/io.h>
-#include <asm/malta.h>
-#include <pci_gt64120.h>
-
-phys_size_t initdram(int board_type)
-{
- return CONFIG_SYS_MEM_SIZE;
-}
-
-int checkboard(void)
-{
- puts("Board: MIPS Malta CoreLV (Qemu)\n");
- return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
- return pci_eth_init(bis);
-}
-
-void _machine_restart(void)
-{
- void __iomem *reset_base;
-
- reset_base = (void __iomem *)CKSEG1ADDR(MALTA_RESET_BASE);
- __raw_writel(GORESET, reset_base);
-}
-
-void pci_init_board(void)
-{
- set_io_port_base(CKSEG1ADDR(MALTA_IO_PORT_BASE));
-
- gt64120_pci_init((void *)CKSEG1ADDR(MALTA_GT_BASE),
- 0x00000000, 0x00000000, CONFIG_SYS_MEM_SIZE,
- 0x10000000, 0x10000000, 128 * 1024 * 1024,
- 0x00000000, 0x00000000, 0x20000);
-}
diff --git a/boards.cfg b/boards.cfg
index ce5b686..7ee63ee 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -482,10 +482,10 @@ Active m68k mcf547x_8x - freescale m548xevb
Active m68k mcf547x_8x - freescale m548xevb M5485GFE M5485EVB:SYS_BUSCLK=100000000,SYS_BOOTSZ=4,SYS_DRAMSZ=64 TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Active m68k mcf547x_8x - freescale m548xevb M5485HFE M5485EVB:SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16,SYS_VIDEO TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Active microblaze microblaze - xilinx microblaze-generic microblaze-generic - Michal Simek <monstr@monstr.eu>
-Active mips mips32 - - qemu-malta qemu_malta qemu-malta:MIPS32,SYS_BIG_ENDIAN -
-Active mips mips32 - - qemu-malta qemu_maltael qemu-malta:MIPS32,SYS_LITTLE_ENDIAN -
Active mips mips32 - - qemu-mips qemu_mips qemu-mips:SYS_BIG_ENDIAN Vlad Lungu <vlad.lungu@windriver.com>
Active mips mips32 - - qemu-mips qemu_mipsel qemu-mips:SYS_LITTLE_ENDIAN -
+Active mips mips32 - imgtec malta malta malta:MIPS32,SYS_BIG_ENDIAN Paul Burton <paul.burton@imgtec.com>
+Active mips mips32 - imgtec malta maltael malta:MIPS32,SYS_LITTLE_ENDIAN Paul Burton <paul.burton@imgtec.com>
Active mips mips32 - micronas vct vct_platinum vct:VCT_PLATINUM -
Active mips mips32 - micronas vct vct_platinum_onenand vct:VCT_PLATINUM,VCT_ONENAND -
Active mips mips32 - micronas vct vct_platinum_onenand_small vct:VCT_PLATINUM,VCT_ONENAND,VCT_SMALL_IMAGE -
diff --git a/doc/README.malta b/doc/README.malta
new file mode 100644
index 0000000..a495d02
--- /dev/null
+++ b/doc/README.malta
@@ -0,0 +1,16 @@
+MIPS Malta board
+
+How to flash using a MIPS Navigator Probe:
+
+ - Ensure that your Malta has jumper JP1 fitted. Without this jumper you will
+ be unable to flash your Malta using a Navigator Probe.
+
+ - Connect Navigator Console to your probe and Malta as usual.
+
+ - Within Navigator Console run the following commands:
+
+ source /path/to/u-boot/board/malta/flash-malta-boot.tcl
+ reset
+ flash-boot /path/to/u-boot/u-boot.bin
+
+ - You should now be able to reboot your Malta to a U-boot shell.
diff --git a/drivers/net/pcnet.c b/drivers/net/pcnet.c
index 283cb48..5b248be 100644
--- a/drivers/net/pcnet.c
+++ b/drivers/net/pcnet.c
@@ -89,39 +89,39 @@ static pcnet_priv_t *lp;
#define PCNET_RESET 0x14
#define PCNET_BDP 0x16
-static u16 pcnet_read_csr (struct eth_device *dev, int index)
+static u16 pcnet_read_csr(struct eth_device *dev, int index)
{
- outw (index, dev->iobase + PCNET_RAP);
- return inw (dev->iobase + PCNET_RDP);
+ outw(index, dev->iobase + PCNET_RAP);
+ return inw(dev->iobase + PCNET_RDP);
}
-static void pcnet_write_csr (struct eth_device *dev, int index, u16 val)
+static void pcnet_write_csr(struct eth_device *dev, int index, u16 val)
{
- outw (index, dev->iobase + PCNET_RAP);
- outw (val, dev->iobase + PCNET_RDP);
+ outw(index, dev->iobase + PCNET_RAP);
+ outw(val, dev->iobase + PCNET_RDP);
}
-static u16 pcnet_read_bcr (struct eth_device *dev, int index)
+static u16 pcnet_read_bcr(struct eth_device *dev, int index)
{
- outw (index, dev->iobase + PCNET_RAP);
- return inw (dev->iobase + PCNET_BDP);
+ outw(index, dev->iobase + PCNET_RAP);
+ return inw(dev->iobase + PCNET_BDP);
}
-static void pcnet_write_bcr (struct eth_device *dev, int index, u16 val)
+static void pcnet_write_bcr(struct eth_device *dev, int index, u16 val)
{
- outw (index, dev->iobase + PCNET_RAP);
- outw (val, dev->iobase + PCNET_BDP);
+ outw(index, dev->iobase + PCNET_RAP);
+ outw(val, dev->iobase + PCNET_BDP);
}
-static void pcnet_reset (struct eth_device *dev)
+static void pcnet_reset(struct eth_device *dev)
{
- inw (dev->iobase + PCNET_RESET);
+ inw(dev->iobase + PCNET_RESET);
}
-static int pcnet_check (struct eth_device *dev)
+static int pcnet_check(struct eth_device *dev)
{
- outw (88, dev->iobase + PCNET_RAP);
- return (inw (dev->iobase + PCNET_RAP) == 88);
+ outw(88, dev->iobase + PCNET_RAP);
+ return inw(dev->iobase + PCNET_RAP) == 88;
}
static int pcnet_init (struct eth_device *dev, bd_t * bis);
@@ -139,63 +139,64 @@ static struct pci_device_id supported[] = {
};
-int pcnet_initialize (bd_t * bis)
+int pcnet_initialize(bd_t *bis)
{
pci_dev_t devbusfn;
struct eth_device *dev;
u16 command, status;
int dev_nr = 0;
- PCNET_DEBUG1 ("\npcnet_initialize...\n");
+ PCNET_DEBUG1("\npcnet_initialize...\n");
for (dev_nr = 0;; dev_nr++) {
/*
* Find the PCnet PCI device(s).
*/
- if ((devbusfn = pci_find_devices (supported, dev_nr)) < 0) {
+ devbusfn = pci_find_devices(supported, dev_nr);
+ if (devbusfn < 0)
break;
- }
/*
* Allocate and pre-fill the device structure.
*/
- dev = (struct eth_device *) malloc (sizeof *dev);
+ dev = (struct eth_device *)malloc(sizeof(*dev));
if (!dev) {
printf("pcnet: Can not allocate memory\n");
break;
}
memset(dev, 0, sizeof(*dev));
- dev->priv = (void *) devbusfn;
- sprintf (dev->name, "pcnet#%d", dev_nr);
+ dev->priv = (void *)devbusfn;
+ sprintf(dev->name, "pcnet#%d", dev_nr);
/*
* Setup the PCI device.
*/
- pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0,
- (unsigned int *) &dev->iobase);
- dev->iobase=pci_io_to_phys (devbusfn, dev->iobase);
+ pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0,
+ (unsigned int *)&dev->iobase);
+ dev->iobase = pci_io_to_phys(devbusfn, dev->iobase);
dev->iobase &= ~0xf;
- PCNET_DEBUG1 ("%s: devbusfn=0x%x iobase=0x%x: ",
- dev->name, devbusfn, dev->iobase);
+ PCNET_DEBUG1("%s: devbusfn=0x%x iobase=0x%x: ",
+ dev->name, devbusfn, dev->iobase);
command = PCI_COMMAND_IO | PCI_COMMAND_MASTER;
- pci_write_config_word (devbusfn, PCI_COMMAND, command);
- pci_read_config_word (devbusfn, PCI_COMMAND, &status);
+ pci_write_config_word(devbusfn, PCI_COMMAND, command);
+ pci_read_config_word(devbusfn, PCI_COMMAND, &status);
if ((status & command) != command) {
- printf ("%s: Couldn't enable IO access or Bus Mastering\n", dev->name);
- free (dev);
+ printf("%s: Couldn't enable IO access or Bus Mastering\n",
+ dev->name);
+ free(dev);
continue;
}
- pci_write_config_byte (devbusfn, PCI_LATENCY_TIMER, 0x40);
+ pci_write_config_byte(devbusfn, PCI_LATENCY_TIMER, 0x40);
/*
* Probe the PCnet chip.
*/
- if (pcnet_probe (dev, bis, dev_nr) < 0) {
- free (dev);
+ if (pcnet_probe(dev, bis, dev_nr) < 0) {
+ free(dev);
continue;
}
@@ -207,15 +208,15 @@ int pcnet_initialize (bd_t * bis)
dev->send = pcnet_send;
dev->recv = pcnet_recv;
- eth_register (dev);
+ eth_register(dev);
}
- udelay (10 * 1000);
+ udelay(10 * 1000);
return dev_nr;
}
-static int pcnet_probe (struct eth_device *dev, bd_t * bis, int dev_nr)
+static int pcnet_probe(struct eth_device *dev, bd_t *bis, int dev_nr)
{
int chip_version;
char *chipname;
@@ -225,17 +226,17 @@ static int pcnet_probe (struct eth_device *dev, bd_t * bis, int dev_nr)
#endif
/* Reset the PCnet controller */
- pcnet_reset (dev);
+ pcnet_reset(dev);
/* Check if register access is working */
- if (pcnet_read_csr (dev, 0) != 4 || !pcnet_check (dev)) {
- printf ("%s: CSR register access check failed\n", dev->name);
+ if (pcnet_read_csr(dev, 0) != 4 || !pcnet_check(dev)) {
+ printf("%s: CSR register access check failed\n", dev->name);
return -1;
}
/* Identify the chip */
chip_version =
- pcnet_read_csr (dev, 88) | (pcnet_read_csr (dev, 89) << 16);
+ pcnet_read_csr(dev, 88) | (pcnet_read_csr(dev, 89) << 16);
if ((chip_version & 0xfff) != 0x003)
return -1;
chip_version = (chip_version >> 12) & 0xffff;
@@ -254,12 +255,12 @@ static int pcnet_probe (struct eth_device *dev, bd_t * bis, int dev_nr)
break;
#endif
default:
- printf ("%s: PCnet version %#x not supported\n",
- dev->name, chip_version);
+ printf("%s: PCnet version %#x not supported\n",
+ dev->name, chip_version);
return -1;
}
- PCNET_DEBUG1 ("AMD %s\n", chipname);
+ PCNET_DEBUG1("AMD %s\n", chipname);
#ifdef PCNET_HAS_PROM
/*
@@ -270,7 +271,7 @@ static int pcnet_probe (struct eth_device *dev, bd_t * bis, int dev_nr)
for (i = 0; i < 3; i++) {
unsigned int val;
- val = pcnet_read_csr (dev, i + 12) & 0x0ffff;
+ val = pcnet_read_csr(dev, i + 12) & 0x0ffff;
/* There may be endianness issues here. */
dev->enetaddr[2 * i] = val & 0x0ff;
dev->enetaddr[2 * i + 1] = (val >> 8) & 0x0ff;
@@ -280,35 +281,50 @@ static int pcnet_probe (struct eth_device *dev, bd_t * bis, int dev_nr)
return 0;
}
-static int pcnet_init (struct eth_device *dev, bd_t * bis)
+static int pcnet_init(struct eth_device *dev, bd_t *bis)
{
int i, val;
u32 addr;
- PCNET_DEBUG1 ("%s: pcnet_init...\n", dev->name);
+ PCNET_DEBUG1("%s: pcnet_init...\n", dev->name);
/* Switch pcnet to 32bit mode */
- pcnet_write_bcr (dev, 20, 2);
+ pcnet_write_bcr(dev, 20, 2);
#ifdef CONFIG_PN62
/* Setup LED registers */
- val = pcnet_read_bcr (dev, 2) | 0x1000;
- pcnet_write_bcr (dev, 2, val); /* enable LEDPE */
- pcnet_write_bcr (dev, 4, 0x5080); /* 100MBit */
- pcnet_write_bcr (dev, 5, 0x40c0); /* LNKSE */
- pcnet_write_bcr (dev, 6, 0x4090); /* TX Activity */
- pcnet_write_bcr (dev, 7, 0x4084); /* RX Activity */
+ val = pcnet_read_bcr(dev, 2) | 0x1000;
+ pcnet_write_bcr(dev, 2, val); /* enable LEDPE */
+ pcnet_write_bcr(dev, 4, 0x5080); /* 100MBit */
+ pcnet_write_bcr(dev, 5, 0x40c0); /* LNKSE */
+ pcnet_write_bcr(dev, 6, 0x4090); /* TX Activity */
+ pcnet_write_bcr(dev, 7, 0x4084); /* RX Activity */
#endif
/* Set/reset autoselect bit */
- val = pcnet_read_bcr (dev, 2) & ~2;
+ val = pcnet_read_bcr(dev, 2) & ~2;
val |= 2;
- pcnet_write_bcr (dev, 2, val);
+ pcnet_write_bcr(dev, 2, val);
/* Enable auto negotiate, setup, disable fd */
- val = pcnet_read_bcr (dev, 32) & ~0x98;
+ val = pcnet_read_bcr(dev, 32) & ~0x98;
val |= 0x20;
- pcnet_write_bcr (dev, 32, val);
+ pcnet_write_bcr(dev, 32, val);
+
+ /*
+ * Enable NOUFLO on supported controllers, with the transmit
+ * start point set to the full packet. This will cause entire
+ * packets to be buffered by the ethernet controller before
+ * transmission, eliminating underflows which are common on
+ * slower devices. Controllers which do not support NOUFLO will
+ * simply be left with a larger transmit FIFO threshold.
+ */
+ val = pcnet_read_bcr(dev, 18);
+ val |= 1 << 11;
+ pcnet_write_bcr(dev, 18, val);
+ val = pcnet_read_csr(dev, 80);
+ val |= 0x3 << 10;
+ pcnet_write_csr(dev, 80, val);
/*
* We only maintain one structure because the drivers will never
@@ -316,12 +332,12 @@ static int pcnet_init (struct eth_device *dev, bd_t * bis)
* must be aligned on 16-byte boundaries.
*/
if (lp == NULL) {
- addr = (u32) malloc (sizeof (pcnet_priv_t) + 0x10);
+ addr = (u32)malloc(sizeof(pcnet_priv_t) + 0x10);
addr = (addr + 0xf) & ~0xf;
- lp = (pcnet_priv_t *) addr;
+ lp = (pcnet_priv_t *)addr;
}
- lp->init_block.mode = cpu_to_le16 (0x0000);
+ lp->init_block.mode = cpu_to_le16(0x0000);
lp->init_block.filter[0] = 0x00000000;
lp->init_block.filter[1] = 0x00000000;
@@ -330,9 +346,9 @@ static int pcnet_init (struct eth_device *dev, bd_t * bis)
*/
lp->cur_rx = 0;
for (i = 0; i < RX_RING_SIZE; i++) {
- lp->rx_ring[i].base = PCI_TO_MEM_LE (dev, lp->rx_buf[i]);
- lp->rx_ring[i].buf_length = cpu_to_le16 (-PKT_BUF_SZ);
- lp->rx_ring[i].status = cpu_to_le16 (0x8000);
+ lp->rx_ring[i].base = PCI_TO_MEM_LE(dev, lp->rx_buf[i]);
+ lp->rx_ring[i].buf_length = cpu_to_le16(-PKT_BUF_SZ);
+ lp->rx_ring[i].status = cpu_to_le16(0x8000);
PCNET_DEBUG1
("Rx%d: base=0x%x buf_length=0x%hx status=0x%hx\n", i,
lp->rx_ring[i].base, lp->rx_ring[i].buf_length,
@@ -352,48 +368,49 @@ static int pcnet_init (struct eth_device *dev, bd_t * bis)
/*
* Setup Init Block.
*/
- PCNET_DEBUG1 ("Init block at 0x%p: MAC", &lp->init_block);
+ PCNET_DEBUG1("Init block at 0x%p: MAC", &lp->init_block);
for (i = 0; i < 6; i++) {
lp->init_block.phys_addr[i] = dev->enetaddr[i];
- PCNET_DEBUG1 (" %02x", lp->init_block.phys_addr[i]);
+ PCNET_DEBUG1(" %02x", lp->init_block.phys_addr[i]);
}
- lp->init_block.tlen_rlen = cpu_to_le16 (TX_RING_LEN_BITS |
- RX_RING_LEN_BITS);
- lp->init_block.rx_ring = PCI_TO_MEM_LE (dev, lp->rx_ring);
- lp->init_block.tx_ring = PCI_TO_MEM_LE (dev, lp->tx_ring);
+ lp->init_block.tlen_rlen = cpu_to_le16(TX_RING_LEN_BITS |
+ RX_RING_LEN_BITS);
+ lp->init_block.rx_ring = PCI_TO_MEM_LE(dev, lp->rx_ring);
+ lp->init_block.tx_ring = PCI_TO_MEM_LE(dev, lp->tx_ring);
+ flush_dcache_range((unsigned long)lp, (unsigned long)&lp->rx_buf);
- PCNET_DEBUG1 ("\ntlen_rlen=0x%x rx_ring=0x%x tx_ring=0x%x\n",
- lp->init_block.tlen_rlen,
- lp->init_block.rx_ring, lp->init_block.tx_ring);
+ PCNET_DEBUG1("\ntlen_rlen=0x%x rx_ring=0x%x tx_ring=0x%x\n",
+ lp->init_block.tlen_rlen,
+ lp->init_block.rx_ring, lp->init_block.tx_ring);
/*
* Tell the controller where the Init Block is located.
*/
- addr = PCI_TO_MEM (dev, &lp->init_block);
- pcnet_write_csr (dev, 1, addr & 0xffff);
- pcnet_write_csr (dev, 2, (addr >> 16) & 0xffff);
+ addr = PCI_TO_MEM(dev, &lp->init_block);
+ pcnet_write_csr(dev, 1, addr & 0xffff);
+ pcnet_write_csr(dev, 2, (addr >> 16) & 0xffff);
- pcnet_write_csr (dev, 4, 0x0915);
- pcnet_write_csr (dev, 0, 0x0001); /* start */
+ pcnet_write_csr(dev, 4, 0x0915);
+ pcnet_write_csr(dev, 0, 0x0001); /* start */
/* Wait for Init Done bit */
for (i = 10000; i > 0; i--) {
- if (pcnet_read_csr (dev, 0) & 0x0100)
+ if (pcnet_read_csr(dev, 0) & 0x0100)
break;
- udelay (10);
+ udelay(10);
}
if (i <= 0) {
- printf ("%s: TIMEOUT: controller init failed\n", dev->name);
- pcnet_reset (dev);
+ printf("%s: TIMEOUT: controller init failed\n", dev->name);
+ pcnet_reset(dev);
return -1;
}
/*
* Finally start network controller operation.
*/
- pcnet_write_csr (dev, 0, 0x0002);
+ pcnet_write_csr(dev, 0, 0x0002);
return 0;
}
@@ -403,20 +420,25 @@ static int pcnet_send(struct eth_device *dev, void *packet, int pkt_len)
int i, status;
struct pcnet_tx_head *entry = &lp->tx_ring[lp->cur_tx];
- PCNET_DEBUG2 ("Tx%d: %d bytes from 0x%p ", lp->cur_tx, pkt_len,
- packet);
+ PCNET_DEBUG2("Tx%d: %d bytes from 0x%p ", lp->cur_tx, pkt_len,
+ packet);
+
+ flush_dcache_range((unsigned long)packet,
+ (unsigned long)packet + pkt_len);
/* Wait for completion by testing the OWN bit */
for (i = 1000; i > 0; i--) {
- status = le16_to_cpu (entry->status);
+ invalidate_dcache_range((unsigned long)entry,
+ (unsigned long)entry + sizeof(*entry));
+ status = le16_to_cpu(entry->status);
if ((status & 0x8000) == 0)
break;
- udelay (100);
- PCNET_DEBUG2 (".");
+ udelay(100);
+ PCNET_DEBUG2(".");
}
if (i <= 0) {
- printf ("%s: TIMEOUT: Tx%d failed (status = 0x%x)\n",
- dev->name, lp->cur_tx, status);
+ printf("%s: TIMEOUT: Tx%d failed (status = 0x%x)\n",
+ dev->name, lp->cur_tx, status);
pkt_len = 0;
goto failure;
}
@@ -426,19 +448,21 @@ static int pcnet_send(struct eth_device *dev, void *packet, int pkt_len)
* set the status with the "ownership" bits last.
*/
status = 0x8300;
- entry->length = le16_to_cpu (-pkt_len);
+ entry->length = cpu_to_le16(-pkt_len);
entry->misc = 0x00000000;
- entry->base = PCI_TO_MEM_LE (dev, packet);
- entry->status = le16_to_cpu (status);
+ entry->base = PCI_TO_MEM_LE(dev, packet);
+ entry->status = cpu_to_le16(status);
+ flush_dcache_range((unsigned long)entry,
+ (unsigned long)entry + sizeof(*entry));
/* Trigger an immediate send poll. */
- pcnet_write_csr (dev, 0, 0x0008);
+ pcnet_write_csr(dev, 0, 0x0008);
failure:
if (++lp->cur_tx >= TX_RING_SIZE)
lp->cur_tx = 0;
- PCNET_DEBUG2 ("done\n");
+ PCNET_DEBUG2("done\n");
return pkt_len;
}
@@ -450,43 +474,49 @@ static int pcnet_recv (struct eth_device *dev)
while (1) {
entry = &lp->rx_ring[lp->cur_rx];
+ invalidate_dcache_range((unsigned long)entry,
+ (unsigned long)entry + sizeof(*entry));
/*
* If we own the next entry, it's a new packet. Send it up.
*/
- if (((status = le16_to_cpu (entry->status)) & 0x8000) != 0) {
+ status = le16_to_cpu(entry->status);
+ if ((status & 0x8000) != 0)
break;
- }
status >>= 8;
if (status != 0x03) { /* There was an error. */
-
- printf ("%s: Rx%d", dev->name, lp->cur_rx);
- PCNET_DEBUG1 (" (status=0x%x)", status);
+ printf("%s: Rx%d", dev->name, lp->cur_rx);
+ PCNET_DEBUG1(" (status=0x%x)", status);
if (status & 0x20)
- printf (" Frame");
+ printf(" Frame");
if (status & 0x10)
- printf (" Overflow");
+ printf(" Overflow");
if (status & 0x08)
- printf (" CRC");
+ printf(" CRC");
if (status & 0x04)
- printf (" Fifo");
- printf (" Error\n");
- entry->status &= le16_to_cpu (0x03ff);
+ printf(" Fifo");
+ printf(" Error\n");
+ entry->status &= le16_to_cpu(0x03ff);
} else {
-
- pkt_len =
- (le32_to_cpu (entry->msg_length) & 0xfff) - 4;
+ pkt_len = (le32_to_cpu(entry->msg_length) & 0xfff) - 4;
if (pkt_len < 60) {
- printf ("%s: Rx%d: invalid packet length %d\n", dev->name, lp->cur_rx, pkt_len);
+ printf("%s: Rx%d: invalid packet length %d\n",
+ dev->name, lp->cur_rx, pkt_len);
} else {
- NetReceive (lp->rx_buf[lp->cur_rx], pkt_len);
- PCNET_DEBUG2 ("Rx%d: %d bytes from 0x%p\n",
- lp->cur_rx, pkt_len,
- lp->rx_buf[lp->cur_rx]);
+ invalidate_dcache_range(
+ (unsigned long)lp->rx_buf[lp->cur_rx],
+ (unsigned long)lp->rx_buf[lp->cur_rx] +
+ pkt_len);
+ NetReceive(lp->rx_buf[lp->cur_rx], pkt_len);
+ PCNET_DEBUG2("Rx%d: %d bytes from 0x%p\n",
+ lp->cur_rx, pkt_len,
+ lp->rx_buf[lp->cur_rx]);
}
}
- entry->status |= cpu_to_le16 (0x8000);
+ entry->status |= cpu_to_le16(0x8000);
+ flush_dcache_range((unsigned long)entry,
+ (unsigned long)entry + sizeof(*entry));
if (++lp->cur_rx >= RX_RING_SIZE)
lp->cur_rx = 0;
@@ -494,22 +524,21 @@ static int pcnet_recv (struct eth_device *dev)
return pkt_len;
}
-static void pcnet_halt (struct eth_device *dev)
+static void pcnet_halt(struct eth_device *dev)
{
int i;
- PCNET_DEBUG1 ("%s: pcnet_halt...\n", dev->name);
+ PCNET_DEBUG1("%s: pcnet_halt...\n", dev->name);
/* Reset the PCnet controller */
- pcnet_reset (dev);
+ pcnet_reset(dev);
/* Wait for Stop bit */
for (i = 1000; i > 0; i--) {
- if (pcnet_read_csr (dev, 0) & 0x4)
+ if (pcnet_read_csr(dev, 0) & 0x4)
break;
- udelay (10);
- }
- if (i <= 0) {
- printf ("%s: TIMEOUT: controller reset failed\n", dev->name);
+ udelay(10);
}
+ if (i <= 0)
+ printf("%s: TIMEOUT: controller reset failed\n", dev->name);
}
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 99d51a6..6182a59 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_FSL_PCI_INIT) += fsl_pci_init.o
obj-$(CONFIG_PCI) += pci.o pci_auto.o
obj-$(CONFIG_PCI_INDIRECT_BRIDGE) += pci_indirect.o
obj-$(CONFIG_PCI_GT64120) += pci_gt64120.o
+obj-$(CONFIG_PCI_MSC01) += pci_msc01.o
obj-$(CONFIG_FTPCI100) += pci_ftpci100.o
obj-$(CONFIG_IXP_PCI) += pci_ixp.o
obj-$(CONFIG_SH4_PCI) += pci_sh4.o
diff --git a/drivers/pci/pci_msc01.c b/drivers/pci/pci_msc01.c
new file mode 100644
index 0000000..284ffa0
--- /dev/null
+++ b/drivers/pci/pci_msc01.c
@@ -0,0 +1,125 @@
+/*
+ * Copyright (C) 2013 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <msc01.h>
+#include <pci.h>
+#include <pci_msc01.h>
+#include <asm/io.h>
+
+#define PCI_ACCESS_READ 0
+#define PCI_ACCESS_WRITE 1
+
+struct msc01_pci_controller {
+ struct pci_controller hose;
+ void *base;
+};
+
+static inline struct msc01_pci_controller *
+hose_to_msc01(struct pci_controller *hose)
+{
+ return container_of(hose, struct msc01_pci_controller, hose);
+}
+
+static int msc01_config_access(struct msc01_pci_controller *msc01,
+ unsigned char access_type, pci_dev_t bdf,
+ int where, u32 *data)
+{
+ const u32 aborts = MSC01_PCI_INTSTAT_MA_MSK | MSC01_PCI_INTSTAT_TA_MSK;
+ void *intstat = msc01->base + MSC01_PCI_INTSTAT_OFS;
+ void *cfgdata = msc01->base + MSC01_PCI_CFGDATA_OFS;
+ unsigned int bus = PCI_BUS(bdf);
+ unsigned int dev = PCI_DEV(bdf);
+ unsigned int devfn = PCI_DEV(bdf) << 3 | PCI_FUNC(bdf);
+
+ /* clear abort status */
+ __raw_writel(aborts, intstat);
+
+ /* setup address */
+ __raw_writel((bus << MSC01_PCI_CFGADDR_BNUM_SHF) |
+ (dev << MSC01_PCI_CFGADDR_DNUM_SHF) |
+ (devfn << MSC01_PCI_CFGADDR_FNUM_SHF) |
+ ((where / 4) << MSC01_PCI_CFGADDR_RNUM_SHF),
+ msc01->base + MSC01_PCI_CFGADDR_OFS);
+
+ /* perform access */
+ if (access_type == PCI_ACCESS_WRITE)
+ __raw_writel(*data, cfgdata);
+ else
+ *data = __raw_readl(cfgdata);
+
+ /* check for aborts */
+ if (__raw_readl(intstat) & aborts) {
+ /* clear abort status */
+ __raw_writel(aborts, intstat);
+ return -1;
+ }
+
+ return 0;
+}
+
+static int msc01_read_config_dword(struct pci_controller *hose, pci_dev_t dev,
+ int where, u32 *value)
+{
+ struct msc01_pci_controller *msc01 = hose_to_msc01(hose);
+
+ *value = 0xffffffff;
+ return msc01_config_access(msc01, PCI_ACCESS_READ, dev, where, value);
+}
+
+static int msc01_write_config_dword(struct pci_controller *hose, pci_dev_t dev,
+ int where, u32 value)
+{
+ struct msc01_pci_controller *gt = hose_to_msc01(hose);
+ u32 data = value;
+
+ return msc01_config_access(gt, PCI_ACCESS_WRITE, dev, where, &data);
+}
+
+void msc01_pci_init(void *base, unsigned long sys_bus, unsigned long sys_phys,
+ unsigned long sys_size, unsigned long mem_bus,
+ unsigned long mem_phys, unsigned long mem_size,
+ unsigned long io_bus, unsigned long io_phys,
+ unsigned long io_size)
+{
+ static struct msc01_pci_controller global_msc01;
+ struct msc01_pci_controller *msc01;
+ struct pci_controller *hose;
+
+ msc01 = &global_msc01;
+ msc01->base = base;
+
+ hose = &msc01->hose;
+
+ hose->first_busno = 0;
+ hose->last_busno = 0;
+
+ /* System memory space */
+ pci_set_region(&hose->regions[0], sys_bus, sys_phys, sys_size,
+ PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
+
+ /* PCI memory space */
+ pci_set_region(&hose->regions[1], mem_bus, mem_phys, mem_size,
+ PCI_REGION_MEM);
+
+ /* PCI I/O space */
+ pci_set_region(&hose->regions[2], io_bus, io_phys, io_size,
+ PCI_REGION_IO);
+
+ hose->region_count = 3;
+
+ pci_set_ops(hose,
+ pci_hose_read_config_byte_via_dword,
+ pci_hose_read_config_word_via_dword,
+ msc01_read_config_dword,
+ pci_hose_write_config_byte_via_dword,
+ pci_hose_write_config_word_via_dword,
+ msc01_write_config_dword);
+
+ pci_register_hose(hose);
+ hose->last_busno = pci_hose_scan(hose);
+}
diff --git a/drivers/rtc/mc146818.c b/drivers/rtc/mc146818.c
index 5f9d359..f7cf106 100644
--- a/drivers/rtc/mc146818.c
+++ b/drivers/rtc/mc146818.c
@@ -15,7 +15,7 @@
#include <command.h>
#include <rtc.h>
-#ifdef __I386__
+#if defined(__I386__) || defined(CONFIG_MALTA)
#include <asm/io.h>
#define in8(p) inb(p)
#define out8(p, v) outb(v, p)
diff --git a/include/configs/qemu-malta.h b/include/configs/malta.h
index 03514d1..4098e72 100644
--- a/include/configs/qemu-malta.h
+++ b/include/configs/malta.h
@@ -4,8 +4,8 @@
* SPDX-License-Identifier: GPL-2.0
*/
-#ifndef _QEMU_MALTA_CONFIG_H
-#define _QEMU_MALTA_CONFIG_H
+#ifndef _MALTA_CONFIG_H
+#define _MALTA_CONFIG_H
#include <asm/addrspace.h>
#include <asm/malta.h>
@@ -13,12 +13,21 @@
/*
* System configuration
*/
-#define CONFIG_QEMU_MALTA
+#define CONFIG_MALTA
+
+#define CONFIG_MEMSIZE_IN_BYTES
#define CONFIG_PCI
#define CONFIG_PCI_GT64120
+#define CONFIG_PCI_MSC01
#define CONFIG_PCI_PNP
#define CONFIG_PCNET
+#define CONFIG_PCNET_79C973
+#define PCNET_HAS_PROM
+
+#define CONFIG_MISC_INIT_R
+#define CONFIG_RTC_MC146818
+#define CONFIG_SYS_ISA_IO_BASE_ADDRESS 0
/*
* CPU Configuration
@@ -26,10 +35,6 @@
#define CONFIG_SYS_MHZ 250 /* arbitrary value */
#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
-#define CONFIG_SYS_DCACHE_SIZE 16384 /* arbitrary value */
-#define CONFIG_SYS_ICACHE_SIZE 16384 /* arbitrary value */
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* arbitrary value */
-
#define CONFIG_SWAP_IO_SPACE
/*
@@ -54,9 +59,9 @@
* Console configuration
*/
#if defined(CONFIG_SYS_LITTLE_ENDIAN)
-#define CONFIG_SYS_PROMPT "qemu-maltael # "
+#define CONFIG_SYS_PROMPT "maltael # "
#else
-#define CONFIG_SYS_PROMPT "qemu-malta # "
+#define CONFIG_SYS_PROMPT "malta # "
#endif
#define CONFIG_SYS_CBSIZE 256
@@ -76,16 +81,11 @@
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK 115200
-#define CONFIG_SYS_NS16550_COM1 CKSEG1ADDR(MALTA_UART_BASE)
+#define CONFIG_SYS_NS16550_COM1 CKSEG1ADDR(MALTA_GT_UART0_BASE)
+#define CONFIG_SYS_NS16550_COM2 CKSEG1ADDR(MALTA_MSC01_UART0_BASE)
#define CONFIG_CONS_INDEX 1
/*
- * Environment
- */
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_ENV_SIZE 0x10000
-
-/*
* Flash configuration
*/
#define CONFIG_SYS_FLASH_BASE (KSEG1 | MALTA_FLASH_BASE)
@@ -96,6 +96,15 @@
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
/*
+ * Environment
+ */
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE 0x20000
+#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_ADDR \
+ (CONFIG_SYS_FLASH_BASE + (4 << 20) - CONFIG_ENV_SIZE)
+
+/*
* Commands
*/
#include <config_cmd_default.h>
@@ -105,9 +114,11 @@
#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_NFS
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_SYS_LONGHELP /* verbose help, undef to save memory */
-#endif /* _QEMU_MALTA_CONFIG_H */
+#endif /* _MALTA_CONFIG_H */
diff --git a/include/msc01.h b/include/msc01.h
new file mode 100644
index 0000000..37cf963
--- /dev/null
+++ b/include/msc01.h
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) 2013 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __MSC01_H__
+#define __MSC01_H__
+
+/*
+ * Bus Interface Unit
+ */
+
+#define MSC01_BIU_IP1BAS1L_OFS 0x0208
+#define MSC01_BIU_IP1MSK1L_OFS 0x0218
+#define MSC01_BIU_IP1BAS2L_OFS 0x0248
+#define MSC01_BIU_IP1MSK2L_OFS 0x0258
+#define MSC01_BIU_IP2BAS1L_OFS 0x0288
+#define MSC01_BIU_IP2MSK1L_OFS 0x0298
+#define MSC01_BIU_IP2BAS2L_OFS 0x02c8
+#define MSC01_BIU_IP2MSK2L_OFS 0x02d8
+#define MSC01_BIU_IP3BAS1L_OFS 0x0308
+#define MSC01_BIU_IP3MSK1L_OFS 0x0318
+#define MSC01_BIU_IP3BAS2L_OFS 0x0348
+#define MSC01_BIU_IP3MSK2L_OFS 0x0358
+#define MSC01_BIU_MCBAS1L_OFS 0x0388
+#define MSC01_BIU_MCMSK1L_OFS 0x0398
+#define MSC01_BIU_MCBAS2L_OFS 0x03c8
+#define MSC01_BIU_MCMSK2L_OFS 0x03d8
+
+/*
+ * PCI Bridge
+ */
+
+#define MSC01_PCI_SC2PMBASL_OFS 0x0208
+#define MSC01_PCI_SC2PMMSKL_OFS 0x0218
+#define MSC01_PCI_SC2PMMAPL_OFS 0x0228
+#define MSC01_PCI_SC2PIOBASL_OFS 0x0248
+#define MSC01_PCI_SC2PIOMSKL_OFS 0x0258
+#define MSC01_PCI_SC2PIOMAPL_OFS 0x0268
+#define MSC01_PCI_P2SCMSKL_OFS 0x0308
+#define MSC01_PCI_P2SCMAPL_OFS 0x0318
+#define MSC01_PCI_INTSTAT_OFS 0x0608
+#define MSC01_PCI_CFGADDR_OFS 0x0610
+#define MSC01_PCI_CFGDATA_OFS 0x0618
+#define MSC01_PCI_HEAD0_OFS 0x2000
+#define MSC01_PCI_HEAD1_OFS 0x2008
+#define MSC01_PCI_HEAD2_OFS 0x2010
+#define MSC01_PCI_HEAD3_OFS 0x2018
+#define MSC01_PCI_HEAD4_OFS 0x2020
+#define MSC01_PCI_HEAD5_OFS 0x2028
+#define MSC01_PCI_HEAD6_OFS 0x2030
+#define MSC01_PCI_HEAD7_OFS 0x2038
+#define MSC01_PCI_HEAD8_OFS 0x2040
+#define MSC01_PCI_HEAD9_OFS 0x2048
+#define MSC01_PCI_HEAD10_OFS 0x2050
+#define MSC01_PCI_HEAD11_OFS 0x2058
+#define MSC01_PCI_HEAD12_OFS 0x2060
+#define MSC01_PCI_HEAD13_OFS 0x2068
+#define MSC01_PCI_HEAD14_OFS 0x2070
+#define MSC01_PCI_HEAD15_OFS 0x2078
+#define MSC01_PCI_BAR0_OFS 0x2220
+#define MSC01_PCI_CFG_OFS 0x2380
+#define MSC01_PCI_SWAP_OFS 0x2388
+
+#define MSC01_PCI_SC2PMMSKL_MSK_MSK 0xff000000
+#define MSC01_PCI_SC2PIOMSKL_MSK_MSK 0xff000000
+
+#define MSC01_PCI_INTSTAT_TA_SHF 6
+#define MSC01_PCI_INTSTAT_TA_MSK (0x1 << MSC01_PCI_INTSTAT_TA_SHF)
+#define MSC01_PCI_INTSTAT_MA_SHF 7
+#define MSC01_PCI_INTSTAT_MA_MSK (0x1 << MSC01_PCI_INTSTAT_MA_SHF)
+
+#define MSC01_PCI_CFGADDR_BNUM_SHF 16
+#define MSC01_PCI_CFGADDR_BNUM_MSK (0xff << MSC01_PCI_CFGADDR_BNUM_SHF)
+#define MSC01_PCI_CFGADDR_DNUM_SHF 11
+#define MSC01_PCI_CFGADDR_DNUM_MSK (0x1f << MSC01_PCI_CFGADDR_DNUM_SHF)
+#define MSC01_PCI_CFGADDR_FNUM_SHF 8
+#define MSC01_PCI_CFGADDR_FNUM_MSK (0x3 << MSC01_PCI_CFGADDR_FNUM_SHF)
+#define MSC01_PCI_CFGADDR_RNUM_SHF 2
+#define MSC01_PCI_CFGADDR_RNUM_MSK (0x3f << MSC01_PCI_CFGADDR_RNUM_SHF)
+
+#define MSC01_PCI_HEAD0_VENDORID_SHF 0
+#define MSC01_PCI_HEAD0_DEVICEID_SHF 16
+
+#define MSC01_PCI_HEAD2_REV_SHF 0
+#define MSC01_PCI_HEAD2_CLASS_SHF 16
+
+#define MSC01_PCI_CFG_EN_SHF 15
+#define MSC01_PCI_CFG_EN_MSK (0x1 << MSC01_PCI_CFG_EN_SHF)
+#define MSC01_PCI_CFG_G_SHF 16
+#define MSC01_PCI_CFG_G_MSK (0x1 << MSC01_PCI_CFG_G_SHF)
+#define MSC01_PCI_CFG_RA_SHF 17
+#define MSC01_PCI_CFG_RA_MSK (0x1 << MSC01_PCI_CFG_RA_SHF)
+
+#define MSC01_PCI_SWAP_BAR0_BSWAP_SHF 0
+#define MSC01_PCI_SWAP_IO_BSWAP_SHF 18
+
+/*
+ * Peripheral Bus Controller
+ */
+
+#define MSC01_PBC_CLKCFG_OFS 0x0100
+#define MSC01_PBC_CS0CFG_OFS 0x0400
+#define MSC01_PBC_CS0TIM_OFS 0x0500
+#define MSC01_PBC_CS0RW_OFS 0x0600
+
+#define MSC01_PBC_CLKCFG_SHF 0
+#define MSC01_PBC_CLKCFG_MSK (0x1f << MSC01_PBC_CLKCFG_SHF)
+
+#define MSC01_PBC_CS0CFG_WS_SHF 0
+#define MSC01_PBC_CS0CFG_WS_MSK (0x1f << MSC01_PBC_CS0CFG_WS_SHF)
+#define MSC01_PBC_CS0CFG_WSIDLE_SHF 8
+#define MSC01_PBC_CS0CFG_WSIDLE_MSK (0x1f << MSC01_PBC_CS0CFG_WSIDLE_SHF)
+#define MSC01_PBC_CS0CFG_DTYP_SHF 16
+#define MSC01_PBC_CS0CFG_DTYP_MSK (0x3 << MSC01_PBC_CS0CFG_DTYP_SHF)
+#define MSC01_PBC_CS0CFG_ADM_SHF 20
+#define MSC01_PBC_CS0CFG_ADM_MSK (0x1 << MSC01_PBC_CS0CFG_ADM_SHF)
+
+#define MSC01_PBC_CS0TIM_CAT_SHF 0
+#define MSC01_PBC_CS0TIM_CAT_MSK (0x1f << MSC01_PBC_CS0TIM_CAT_SHF)
+#define MSC01_PBC_CS0TIM_CDT_SHF 8
+#define MSC01_PBC_CS0TIM_CDT_MSK (0x1f << MSC01_PBC_CS0TIM_CDT_SHF)
+
+#define MSC01_PBC_CS0RW_WAT_SHF 0
+#define MSC01_PBC_CS0RW_WAT_MSK (0x1f << MSC01_PBC_CS0RW_WAT_SHF)
+#define MSC01_PBC_CS0RW_WDT_SHF 8
+#define MSC01_PBC_CS0RW_WDT_MSK (0x1f << MSC01_PBC_CS0RW_WDT_SHF)
+#define MSC01_PBC_CS0RW_RAT_SHF 16
+#define MSC01_PBC_CS0RW_RAT_MSK (0x1f << MSC01_PBC_CS0RW_RAT_SHF)
+#define MSC01_PBC_CS0RW_RDT_SHF 24
+#define MSC01_PBC_CS0RW_RDT_MSK (0x1f << MSC01_PBC_CS0RW_RDT_SHF)
+
+#endif /* __MSC01_H__ */
diff --git a/include/pci.h b/include/pci.h
index d462479..461f17c 100644
--- a/include/pci.h
+++ b/include/pci.h
@@ -417,6 +417,8 @@
#include <pci_ids.h>
+#ifndef __ASSEMBLY__
+
#ifdef CONFIG_SYS_PCI_64BIT
typedef u64 pci_addr_t;
typedef u64 pci_size_t;
@@ -667,4 +669,6 @@ extern void pci_mpc824x_init (struct pci_controller *hose);
#ifdef CONFIG_MPC85xx
extern void pci_mpc85xx_init (struct pci_controller *hose);
#endif
-#endif /* _PCI_H */
+
+#endif /* __ASSEMBLY__ */
+#endif /* _PCI_H */
diff --git a/include/pci_ids.h b/include/pci_ids.h
index 2c6dfd4..6bab677 100644
--- a/include/pci_ids.h
+++ b/include/pci_ids.h
@@ -2170,6 +2170,9 @@
#define PCI_DEVICE_ID_ENE_720 0x1421
#define PCI_DEVICE_ID_ENE_722 0x1422
+#define PCI_VENDOR_ID_MIPS 0x153f
+#define PCI_DEVICE_ID_MIPS_MSC01 0x0001
+
#define PCI_SUBVENDOR_ID_PERLE 0x155f
#define PCI_SUBDEVICE_ID_PCI_RAS4 0xf001
#define PCI_SUBDEVICE_ID_PCI_RAS8 0xf010
diff --git a/include/pci_msc01.h b/include/pci_msc01.h
new file mode 100644
index 0000000..54945a7
--- /dev/null
+++ b/include/pci_msc01.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2013 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __PCI_MSC01_H__
+#define __PCI_MSC01_H__
+
+extern void msc01_pci_init(void *base, unsigned long sys_bus,
+ unsigned long sys_phys, unsigned long sys_size,
+ unsigned long mem_bus, unsigned long mem_phys,
+ unsigned long mem_size, unsigned long io_bus,
+ unsigned long io_phys, unsigned long io_size);
+
+#endif /* __PCI_MSC01_H__ */