summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/usb/gadget/config.c2
-rw-r--r--drivers/usb/gadget/epautoconf.c73
-rw-r--r--drivers/usb/gadget/ether.c513
-rw-r--r--drivers/usb/gadget/gadget_chips.h51
-rw-r--r--drivers/usb/gadget/usbstring.c48
-rw-r--r--include/linux/usb/cdc.h16
-rw-r--r--include/linux/usb/ch9.h4
-rw-r--r--include/linux/usb/gadget.h120
8 files changed, 420 insertions, 407 deletions
diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c
index 84c90f0..cf22629 100644
--- a/drivers/usb/gadget/config.c
+++ b/drivers/usb/gadget/config.c
@@ -101,7 +101,7 @@ int usb_gadget_config_buf(
*cp = *config;
/* then interface/endpoint/class/vendor/... */
- len = usb_descriptor_fillbuf(USB_DT_CONFIG_SIZE + (u8*)buf,
+ len = usb_descriptor_fillbuf(USB_DT_CONFIG_SIZE + (u8 *)buf,
length - USB_DT_CONFIG_SIZE, desc);
if (len < 0)
return len;
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index e11cc20..7cf3c67 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -32,7 +32,7 @@
/* we must assign addresses for configurable endpoints (like net2280) */
static unsigned epnum;
-// #define MANY_ENDPOINTS
+/* #define MANY_ENDPOINTS */
#ifdef MANY_ENDPOINTS
/* more than 15 configurable endpoints */
static unsigned in_epnum;
@@ -55,8 +55,7 @@ static unsigned in_epnum;
* NOTE: each endpoint is unidirectional, as specified by its USB
* descriptor; and isn't specific to a configuration or altsetting.
*/
-static int
-ep_matches (
+static int ep_matches(
struct usb_gadget *gadget,
struct usb_ep *ep,
struct usb_endpoint_descriptor *desc
@@ -83,37 +82,37 @@ ep_matches (
* direction-restriction: "in", "out".
*/
if ('-' != ep->name[2]) {
- tmp = strrchr (ep->name, '-');
+ tmp = strrchr(ep->name, '-');
if (tmp) {
switch (type) {
case USB_ENDPOINT_XFER_INT:
/* bulk endpoints handle interrupt transfers,
* except the toggle-quirky iso-synch kind
*/
- if ('s' == tmp[2]) // == "-iso"
+ if ('s' == tmp[2]) /* == "-iso" */
return 0;
/* for now, avoid PXA "interrupt-in";
* it's documented as never using DATA1.
*/
- if (gadget_is_pxa (gadget)
- && 'i' == tmp [1])
+ if (gadget_is_pxa(gadget)
+ && 'i' == tmp[1])
return 0;
break;
case USB_ENDPOINT_XFER_BULK:
- if ('b' != tmp[1]) // != "-bulk"
+ if ('b' != tmp[1]) /* != "-bulk" */
return 0;
break;
case USB_ENDPOINT_XFER_ISOC:
- if ('s' != tmp[2]) // != "-iso"
+ if ('s' != tmp[2]) /* != "-iso" */
return 0;
}
} else {
- tmp = ep->name + strlen (ep->name);
+ tmp = ep->name + strlen(ep->name);
}
/* direction-restriction: "..in-..", "out-.." */
tmp--;
- if (!isdigit (*tmp)) {
+ if (!isdigit(*tmp)) {
if (desc->bEndpointAddress & USB_DIR_IN) {
if ('n' != *tmp)
return 0;
@@ -155,8 +154,8 @@ ep_matches (
/* MATCH!! */
/* report address */
- if (isdigit (ep->name [2])) {
- u8 num = simple_strtoul (&ep->name [2], NULL, 10);
+ if (isdigit(ep->name[2])) {
+ u8 num = simple_strtoul(&ep->name[2], NULL, 10);
desc->bEndpointAddress |= num;
#ifdef MANY_ENDPOINTS
} else if (desc->bEndpointAddress & USB_DIR_IN) {
@@ -183,12 +182,12 @@ ep_matches (
}
static struct usb_ep *
-find_ep (struct usb_gadget *gadget, const char *name)
+find_ep(struct usb_gadget *gadget, const char *name)
{
struct usb_ep *ep;
- list_for_each_entry (ep, &gadget->ep_list, ep_list) {
- if (0 == strcmp (ep->name, name))
+ list_for_each_entry(ep, &gadget->ep_list, ep_list) {
+ if (0 == strcmp(ep->name, name))
return ep;
}
return NULL;
@@ -224,7 +223,7 @@ find_ep (struct usb_gadget *gadget, const char *name)
*
* On failure, this returns a null endpoint descriptor.
*/
-struct usb_ep * usb_ep_autoconfig (
+struct usb_ep *usb_ep_autoconfig(
struct usb_gadget *gadget,
struct usb_endpoint_descriptor *desc
)
@@ -237,44 +236,44 @@ struct usb_ep * usb_ep_autoconfig (
/* First, apply chip-specific "best usage" knowledge.
* This might make a good usb_gadget_ops hook ...
*/
- if (gadget_is_net2280 (gadget) && type == USB_ENDPOINT_XFER_INT) {
+ if (gadget_is_net2280(gadget) && type == USB_ENDPOINT_XFER_INT) {
/* ep-e, ep-f are PIO with only 64 byte fifos */
- ep = find_ep (gadget, "ep-e");
- if (ep && ep_matches (gadget, ep, desc))
+ ep = find_ep(gadget, "ep-e");
+ if (ep && ep_matches(gadget, ep, desc))
return ep;
- ep = find_ep (gadget, "ep-f");
- if (ep && ep_matches (gadget, ep, desc))
+ ep = find_ep(gadget, "ep-f");
+ if (ep && ep_matches(gadget, ep, desc))
return ep;
- } else if (gadget_is_goku (gadget)) {
+ } else if (gadget_is_goku(gadget)) {
if (USB_ENDPOINT_XFER_INT == type) {
/* single buffering is enough */
- ep = find_ep (gadget, "ep3-bulk");
- if (ep && ep_matches (gadget, ep, desc))
+ ep = find_ep(gadget, "ep3-bulk");
+ if (ep && ep_matches(gadget, ep, desc))
return ep;
} else if (USB_ENDPOINT_XFER_BULK == type
&& (USB_DIR_IN & desc->bEndpointAddress)) {
/* DMA may be available */
- ep = find_ep (gadget, "ep2-bulk");
- if (ep && ep_matches (gadget, ep, desc))
+ ep = find_ep(gadget, "ep2-bulk");
+ if (ep && ep_matches(gadget, ep, desc))
return ep;
}
- } else if (gadget_is_sh (gadget) && USB_ENDPOINT_XFER_INT == type) {
+ } else if (gadget_is_sh(gadget) && USB_ENDPOINT_XFER_INT == type) {
/* single buffering is enough; maybe 8 byte fifo is too */
- ep = find_ep (gadget, "ep3in-bulk");
- if (ep && ep_matches (gadget, ep, desc))
+ ep = find_ep(gadget, "ep3in-bulk");
+ if (ep && ep_matches(gadget, ep, desc))
return ep;
- } else if (gadget_is_mq11xx (gadget) && USB_ENDPOINT_XFER_INT == type) {
- ep = find_ep (gadget, "ep1-bulk");
- if (ep && ep_matches (gadget, ep, desc))
+ } else if (gadget_is_mq11xx(gadget) && USB_ENDPOINT_XFER_INT == type) {
+ ep = find_ep(gadget, "ep1-bulk");
+ if (ep && ep_matches(gadget, ep, desc))
return ep;
}
/* Second, look at endpoints until an unclaimed one looks usable */
- list_for_each_entry (ep, &gadget->ep_list, ep_list) {
- if (ep_matches (gadget, ep, desc))
+ list_for_each_entry(ep, &gadget->ep_list, ep_list) {
+ if (ep_matches(gadget, ep, desc))
return ep;
}
@@ -291,11 +290,11 @@ struct usb_ep * usb_ep_autoconfig (
* state such as ep->driver_data and the record of assigned endpoints
* used by usb_ep_autoconfig().
*/
-void usb_ep_autoconfig_reset (struct usb_gadget *gadget)
+void usb_ep_autoconfig_reset(struct usb_gadget *gadget)
{
struct usb_ep *ep;
- list_for_each_entry (ep, &gadget->ep_list, ep_list) {
+ list_for_each_entry(ep, &gadget->ep_list, ep_list) {
ep->driver_data = NULL;
}
#ifdef MANY_ENDPOINTS
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 2965299..bc6480c 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -89,8 +89,8 @@ unsigned packet_received, packet_sent;
/* Based on linux 2.6.27 version */
#define DRIVER_VERSION "May Day 2005"
-static const char shortname [] = "ether";
-static const char driver_desc [] = DRIVER_DESC;
+static const char shortname[] = "ether";
+static const char driver_desc[] = DRIVER_DESC;
#define RX_EXTRA 20 /* guard against rx overflows */
@@ -114,7 +114,7 @@ static inline int is_cdc(struct eth_dev *dev)
{
#if !defined(DEV_CONFIG_SUBSET)
return 1; /* only cdc possible */
-#elif !defined (DEV_CONFIG_CDC)
+#elif !defined(DEV_CONFIG_CDC)
return 0; /* only subset possible */
#else
return dev->cdc; /* depends on what hardware we found */
@@ -122,7 +122,7 @@ static inline int is_cdc(struct eth_dev *dev)
}
#define subset_active(dev) (!is_cdc(dev))
-#define cdc_active(dev) ( is_cdc(dev))
+#define cdc_active(dev) (is_cdc(dev))
#define DEFAULT_QLEN 2 /* double buffering by default */
@@ -180,15 +180,16 @@ struct eth_dev {
unsigned zlp:1;
unsigned cdc:1;
unsigned suspended:1;
- unsigned network_started:1;
+ unsigned network_started:1;
u16 cdc_filter;
unsigned long todo;
- int mtu;
+ int mtu;
#define WORK_RX_MEMORY 0
- u8 host_mac [ETH_ALEN];
+ u8 host_mac[ETH_ALEN];
};
-/* This version autoconfigures as much as possible at run-time.
+/*
+ * This version autoconfigures as much as possible at run-time.
*
* It also ASSUMES a self-powered device, without remote wakeup,
* although remote wakeup support would make sense.
@@ -196,17 +197,20 @@ struct eth_dev {
/*-------------------------------------------------------------------------*/
-/* DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
+/*
+ * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
* Instead: allocate your own, using normal USB-IF procedures.
*/
-/* Thanks to NetChip Technologies for donating this product ID.
+/*
+ * Thanks to NetChip Technologies for donating this product ID.
* It's for devices with only CDC Ethernet configurations.
*/
#define CDC_VENDOR_NUM 0x0525 /* NetChip */
#define CDC_PRODUCT_NUM 0xa4a1 /* Linux-USB Ethernet Gadget */
-/* For hardware that can't talk CDC, we use the same vendor ID that
+/*
+ * For hardware that can't talk CDC, we use the same vendor ID that
* ARM Linux has used for ethernet-over-usb, both with sa1100 and
* with pxa250. We're protocol-compatible, if the host-side drivers
* use the endpoint descriptors. bcdDevice (version) is nonzero, so
@@ -220,7 +224,8 @@ struct eth_dev {
#define SIMPLE_VENDOR_NUM 0x049f
#define SIMPLE_PRODUCT_NUM 0x505a
-/* Some systems will want different product identifers published in the
+/*
+ * Some systems will want different product identifers published in the
* device descriptor, either numbers or strings or both. These string
* parameters are in UTF-8 (superset of ASCII's 7 bit characters).
*/
@@ -238,7 +243,8 @@ static char host_addr[18];
/*-------------------------------------------------------------------------*/
-/* USB DRIVER HOOKUP (to the hardware driver, below us), mostly
+/*
+ * USB DRIVER HOOKUP (to the hardware driver, below us), mostly
* ep0 implementation: descriptors, config management, setup().
* also optional class-specific notification interrupt transfer.
*/
@@ -276,14 +282,14 @@ device_desc = {
.bLength = sizeof device_desc,
.bDescriptorType = USB_DT_DEVICE,
- .bcdUSB = __constant_cpu_to_le16 (0x0200),
+ .bcdUSB = __constant_cpu_to_le16(0x0200),
.bDeviceClass = USB_CLASS_COMM,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
- .idVendor = __constant_cpu_to_le16 (CDC_VENDOR_NUM),
- .idProduct = __constant_cpu_to_le16 (CDC_PRODUCT_NUM),
+ .idVendor = __constant_cpu_to_le16(CDC_VENDOR_NUM),
+ .idProduct = __constant_cpu_to_le16(CDC_PRODUCT_NUM),
.iManufacturer = STRING_MANUFACTURER,
.iProduct = STRING_PRODUCT,
.bNumConfigurations = 1,
@@ -338,7 +344,7 @@ static const struct usb_cdc_header_desc header_desc = {
.bDescriptorType = USB_DT_CS_INTERFACE,
.bDescriptorSubType = USB_CDC_HEADER_TYPE,
- .bcdCDC = __constant_cpu_to_le16 (0x0110),
+ .bcdCDC = __constant_cpu_to_le16(0x0110),
};
#if defined(DEV_CONFIG_CDC)
@@ -356,7 +362,8 @@ static const struct usb_cdc_union_desc union_desc = {
#ifndef DEV_CONFIG_CDC
-/* "SAFE" loosely follows CDC WMC MDLM, violating the spec in various
+/*
+ * "SAFE" loosely follows CDC WMC MDLM, violating the spec in various
* ways: data endpoints live in the control interface, there's no data
* interface, and it's not used to talk to a cell phone radio.
*/
@@ -373,7 +380,8 @@ static const struct usb_cdc_mdlm_desc mdlm_desc = {
},
};
-/* since "usb_cdc_mdlm_detail_desc" is a variable length structure, we
+/*
+ * since "usb_cdc_mdlm_detail_desc" is a variable length structure, we
* can't really use its struct. All we do here is say that we're using
* the submode of "SAFE" which directly matches the CDC Subset.
*/
@@ -389,24 +397,23 @@ static const u8 mdlm_detail_desc[] = {
#endif
-
static const struct usb_cdc_ether_desc ether_desc = {
- .bLength = sizeof (ether_desc),
+ .bLength = sizeof(ether_desc),
.bDescriptorType = USB_DT_CS_INTERFACE,
.bDescriptorSubType = USB_CDC_ETHERNET_TYPE,
/* this descriptor actually adds value, surprise! */
.iMACAddress = STRING_ETHADDR,
- .bmEthernetStatistics = __constant_cpu_to_le32 (0), /* no statistics */
- .wMaxSegmentSize = __constant_cpu_to_le16 (ETH_FRAME_LEN),
- .wNumberMCFilters = __constant_cpu_to_le16 (0),
+ .bmEthernetStatistics = __constant_cpu_to_le32(0), /* no statistics */
+ .wMaxSegmentSize = __constant_cpu_to_le16(ETH_FRAME_LEN),
+ .wNumberMCFilters = __constant_cpu_to_le16(0),
.bNumberPowerFilters = 0,
};
-
#if defined(DEV_CONFIG_CDC)
-/* include the status endpoint if we can, even where it's optional.
+/*
+ * include the status endpoint if we can, even where it's optional.
* use wMaxPacketSize big enough to fit CDC_NOTIFY_SPEED_CHANGE in one
* packet, to simplify cancellation; and a big transfer interval, to
* waste less bandwidth.
@@ -427,7 +434,7 @@ fs_status_desc = {
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_INT,
- .wMaxPacketSize = __constant_cpu_to_le16 (STATUS_BYTECOUNT),
+ .wMaxPacketSize = __constant_cpu_to_le16(STATUS_BYTECOUNT),
.bInterval = 1 << LOG2_STATUS_INTERVAL_MSEC,
};
#endif
@@ -493,7 +500,6 @@ subset_data_intf = {
#endif /* SUBSET */
-
static struct usb_endpoint_descriptor
fs_source_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
@@ -512,7 +518,7 @@ fs_sink_desc = {
.bmAttributes = USB_ENDPOINT_XFER_BULK,
};
-static const struct usb_descriptor_header *fs_eth_function [11] = {
+static const struct usb_descriptor_header *fs_eth_function[11] = {
(struct usb_descriptor_header *) &otg_descriptor,
#ifdef DEV_CONFIG_CDC
/* "cdc" mode descriptors */
@@ -560,7 +566,7 @@ hs_status_desc = {
.bDescriptorType = USB_DT_ENDPOINT,
.bmAttributes = USB_ENDPOINT_XFER_INT,
- .wMaxPacketSize = __constant_cpu_to_le16 (STATUS_BYTECOUNT),
+ .wMaxPacketSize = __constant_cpu_to_le16(STATUS_BYTECOUNT),
.bInterval = LOG2_STATUS_INTERVAL_MSEC + 4,
};
#endif /* DEV_CONFIG_CDC */
@@ -571,7 +577,7 @@ hs_source_desc = {
.bDescriptorType = USB_DT_ENDPOINT,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
- .wMaxPacketSize = __constant_cpu_to_le16 (512),
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
};
static struct usb_endpoint_descriptor
@@ -580,7 +586,7 @@ hs_sink_desc = {
.bDescriptorType = USB_DT_ENDPOINT,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
- .wMaxPacketSize = __constant_cpu_to_le16 (512),
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
};
static struct usb_qualifier_descriptor
@@ -588,13 +594,13 @@ dev_qualifier = {
.bLength = sizeof dev_qualifier,
.bDescriptorType = USB_DT_DEVICE_QUALIFIER,
- .bcdUSB = __constant_cpu_to_le16 (0x0200),
+ .bcdUSB = __constant_cpu_to_le16(0x0200),
.bDeviceClass = USB_CLASS_COMM,
.bNumConfigurations = 1,
};
-static const struct usb_descriptor_header *hs_eth_function [11] = {
+static const struct usb_descriptor_header *hs_eth_function[11] = {
(struct usb_descriptor_header *) &otg_descriptor,
#ifdef DEV_CONFIG_CDC
/* "cdc" mode descriptors */
@@ -640,20 +646,19 @@ ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *hs,
return fs;
}
-
/*-------------------------------------------------------------------------*/
/* descriptors that are built on-demand */
-static char manufacturer [50];
-static char product_desc [40] = DRIVER_DESC;
-static char serial_number [20];
+static char manufacturer[50];
+static char product_desc[40] = DRIVER_DESC;
+static char serial_number[20];
/* address that the host will use ... usually assigned at random */
-static char ethaddr [2 * ETH_ALEN + 1];
+static char ethaddr[2 * ETH_ALEN + 1];
/* static strings, in UTF-8 */
-static struct usb_string strings [] = {
+static struct usb_string strings[] = {
{ STRING_MANUFACTURER, manufacturer, },
{ STRING_PRODUCT, product_desc, },
{ STRING_SERIALNUMBER, serial_number, },
@@ -674,13 +679,11 @@ static struct usb_gadget_strings stringtab = {
.strings = strings,
};
-
/*============================================================================*/
static u8 control_req[USB_BUFSIZ];
static u8 status_req[STATUS_BYTECOUNT] __attribute__ ((aligned(4)));
-
/**
* strlcpy - Copy a %NUL terminated string into a sized buffer
* @dest: Where to copy the string to
@@ -704,7 +707,6 @@ size_t strlcpy(char *dest, const char *src, size_t size)
return ret;
}
-
/*============================================================================*/
/*
@@ -730,13 +732,13 @@ config_buf(struct usb_gadget *g, u8 *buf, u8 type, unsigned index, int is_otg)
return -EINVAL;
config = &eth_config;
- function = which_fn (eth);
+ function = which_fn(eth);
/* for now, don't advertise srp-only devices */
if (!is_otg)
function++;
- len = usb_gadget_config_buf (config, buf, USB_BUFSIZ, function);
+ len = usb_gadget_config_buf(config, buf, USB_BUFSIZ, function);
if (len < 0)
return len;
((struct usb_config_descriptor *) buf)->bDescriptorType = type;
@@ -745,10 +747,10 @@ config_buf(struct usb_gadget *g, u8 *buf, u8 type, unsigned index, int is_otg)
/*-------------------------------------------------------------------------*/
-static int alloc_requests (struct eth_dev *dev, unsigned n, gfp_t gfp_flags);
+static int alloc_requests(struct eth_dev *dev, unsigned n, gfp_t gfp_flags);
static int
-set_ether_config (struct eth_dev *dev, gfp_t gfp_flags)
+set_ether_config(struct eth_dev *dev, gfp_t gfp_flags)
{
int result = 0;
struct usb_gadget *gadget = dev->gadget;
@@ -756,11 +758,11 @@ set_ether_config (struct eth_dev *dev, gfp_t gfp_flags)
#if defined(DEV_CONFIG_CDC)
/* status endpoint used for (optionally) CDC */
if (!subset_active(dev) && dev->status_ep) {
- dev->status = ep_desc (gadget, &hs_status_desc,
+ dev->status = ep_desc(gadget, &hs_status_desc,
&fs_status_desc);
dev->status_ep->driver_data = dev;
- result = usb_ep_enable (dev->status_ep, dev->status);
+ result = usb_ep_enable(dev->status_ep, dev->status);
if (result != 0) {
debug("enable %s --> %d\n",
dev->status_ep->name, result);
@@ -775,19 +777,20 @@ set_ether_config (struct eth_dev *dev, gfp_t gfp_flags)
dev->out = ep_desc(gadget, &hs_sink_desc, &fs_sink_desc);
dev->out_ep->driver_data = dev;
- /* With CDC, the host isn't allowed to use these two data
+ /*
+ * With CDC, the host isn't allowed to use these two data
* endpoints in the default altsetting for the interface.
* so we don't activate them yet. Reset from SET_INTERFACE.
*/
if (!cdc_active(dev)) {
- result = usb_ep_enable (dev->in_ep, dev->in);
+ result = usb_ep_enable(dev->in_ep, dev->in);
if (result != 0) {
debug("enable %s --> %d\n",
dev->in_ep->name, result);
goto done;
}
- result = usb_ep_enable (dev->out_ep, dev->out);
+ result = usb_ep_enable(dev->out_ep, dev->out);
if (result != 0) {
debug("enable %s --> %d\n",
dev->out_ep->name, result);
@@ -797,15 +800,15 @@ set_ether_config (struct eth_dev *dev, gfp_t gfp_flags)
done:
if (result == 0)
- result = alloc_requests (dev, qlen (gadget), gfp_flags);
+ result = alloc_requests(dev, qlen(gadget), gfp_flags);
/* on error, disable any endpoints */
if (result < 0) {
if (!subset_active(dev) && dev->status_ep)
- (void) usb_ep_disable (dev->status_ep);
+ (void) usb_ep_disable(dev->status_ep);
dev->status = NULL;
- (void) usb_ep_disable (dev->in_ep);
- (void) usb_ep_disable (dev->out_ep);
+ (void) usb_ep_disable(dev->in_ep);
+ (void) usb_ep_disable(dev->out_ep);
dev->in = NULL;
dev->out = NULL;
}
@@ -814,59 +817,61 @@ done:
return result;
}
-
-static void eth_reset_config (struct eth_dev *dev)
+static void eth_reset_config(struct eth_dev *dev)
{
if (dev->config == 0)
return;
debug("%s\n", __func__);
- /* disable endpoints, forcing (synchronous) completion of
+ /*
+ * disable endpoints, forcing (synchronous) completion of
* pending i/o. then free the requests.
*/
if (dev->in) {
- usb_ep_disable (dev->in_ep);
+ usb_ep_disable(dev->in_ep);
if (dev->tx_req) {
- usb_ep_free_request (dev->in_ep, dev->tx_req);
- dev->tx_req=NULL;
+ usb_ep_free_request(dev->in_ep, dev->tx_req);
+ dev->tx_req = NULL;
}
}
if (dev->out) {
- usb_ep_disable (dev->out_ep);
+ usb_ep_disable(dev->out_ep);
if (dev->rx_req) {
- usb_ep_free_request (dev->out_ep, dev->rx_req);
- dev->rx_req=NULL;
+ usb_ep_free_request(dev->out_ep, dev->rx_req);
+ dev->rx_req = NULL;
}
}
- if (dev->status) {
- usb_ep_disable (dev->status_ep);
- }
+ if (dev->status)
+ usb_ep_disable(dev->status_ep);
+
dev->cdc_filter = 0;
dev->config = 0;
}
-/* change our operational config. must agree with the code
+/*
+ * change our operational config. must agree with the code
* that returns config descriptors, and altsetting code.
*/
-static int eth_set_config (struct eth_dev *dev, unsigned number, gfp_t gfp_flags)
+static int eth_set_config(struct eth_dev *dev, unsigned number,
+ gfp_t gfp_flags)
{
int result = 0;
struct usb_gadget *gadget = dev->gadget;
- if (gadget_is_sa1100 (gadget)
+ if (gadget_is_sa1100(gadget)
&& dev->config
&& dev->tx_qlen != 0) {
/* tx fifo is full, but we can't clear it...*/
error("can't change configurations");
return -ESPIPE;
}
- eth_reset_config (dev);
+ eth_reset_config(dev);
switch (number) {
case DEV_CONFIG_VALUE:
- result = set_ether_config (dev, gfp_flags);
+ result = set_ether_config(dev, gfp_flags);
break;
default:
result = -EINVAL;
@@ -877,7 +882,7 @@ static int eth_set_config (struct eth_dev *dev, unsigned number, gfp_t gfp_flags
if (result) {
if (number)
- eth_reset_config (dev);
+ eth_reset_config(dev);
usb_gadget_vbus_draw(dev->gadget,
gadget_is_otg(dev->gadget) ? 8 : 100);
} else {
@@ -888,17 +893,20 @@ static int eth_set_config (struct eth_dev *dev, unsigned number, gfp_t gfp_flags
usb_gadget_vbus_draw(dev->gadget, power);
switch (gadget->speed) {
- case USB_SPEED_FULL: speed = "full"; break;
+ case USB_SPEED_FULL:
+ speed = "full"; break;
#ifdef CONFIG_USB_GADGET_DUALSPEED
- case USB_SPEED_HIGH: speed = "high"; break;
+ case USB_SPEED_HIGH:
+ speed = "high"; break;
#endif
- default: speed = "?"; break;
+ default:
+ speed = "?"; break;
}
dev->config = number;
printf("%s speed config #%d: %d mA, %s, using %s\n",
speed, number, power, driver_desc,
- (cdc_active(dev)? "CDC Ethernet"
+ (cdc_active(dev) ? "CDC Ethernet"
: "CDC Ethernet Subset"));
}
return result;
@@ -908,13 +916,14 @@ static int eth_set_config (struct eth_dev *dev, unsigned number, gfp_t gfp_flags
#ifdef DEV_CONFIG_CDC
-/* The interrupt endpoint is used in CDC networking models (Ethernet, ATM)
+/*
+ * The interrupt endpoint is used in CDC networking models (Ethernet, ATM)
* only to notify the host about link status changes (which we support) or
* report completion of some encapsulated command. Since
* we want this CDC Ethernet code to be vendor-neutral, we don't use that
* command mechanism; and only one status request is ever queued.
*/
-static void eth_status_complete (struct usb_ep *ep, struct usb_request *req)
+static void eth_status_complete(struct usb_ep *ep, struct usb_request *req)
{
struct usb_cdc_notification *event = req->buf;
int value = req->status;
@@ -927,38 +936,38 @@ static void eth_status_complete (struct usb_ep *ep, struct usb_request *req)
event->bmRequestType = 0xA1;
event->bNotificationType = USB_CDC_NOTIFY_SPEED_CHANGE;
- event->wValue = __constant_cpu_to_le16 (0);
- event->wIndex = __constant_cpu_to_le16 (1);
- event->wLength = __constant_cpu_to_le16 (8);
+ event->wValue = __constant_cpu_to_le16(0);
+ event->wIndex = __constant_cpu_to_le16(1);
+ event->wLength = __constant_cpu_to_le16(8);
/* SPEED_CHANGE data is up/down speeds in bits/sec */
- data [0] = data [1] = cpu_to_le32 (BITRATE (dev->gadget));
+ data[0] = data[1] = cpu_to_le32(BITRATE(dev->gadget));
req->length = STATUS_BYTECOUNT;
- value = usb_ep_queue (ep, req, GFP_ATOMIC);
+ value = usb_ep_queue(ep, req, GFP_ATOMIC);
debug("send SPEED_CHANGE --> %d\n", value);
if (value == 0)
return;
} else if (value != -ECONNRESET) {
debug("event %02x --> %d\n",
event->bNotificationType, value);
- if (event->bNotificationType==
- USB_CDC_NOTIFY_SPEED_CHANGE)
- {
- l_ethdev.network_started=1;
+ if (event->bNotificationType ==
+ USB_CDC_NOTIFY_SPEED_CHANGE) {
+ l_ethdev.network_started = 1;
printf("USB network up!\n");
}
}
req->context = NULL;
}
-static void issue_start_status (struct eth_dev *dev)
+static void issue_start_status(struct eth_dev *dev)
{
struct usb_request *req = dev->stat_req;
struct usb_cdc_notification *event;
int value;
- /* flush old status
+ /*
+ * flush old status
*
* FIXME ugly idiom, maybe we'd be better with just
* a "cancel the whole queue" primitive since any
@@ -967,24 +976,25 @@ static void issue_start_status (struct eth_dev *dev)
*
* FIXME iff req->context != null just dequeue it
*/
- usb_ep_disable (dev->status_ep);
- usb_ep_enable (dev->status_ep, dev->status);
+ usb_ep_disable(dev->status_ep);
+ usb_ep_enable(dev->status_ep, dev->status);
- /* 3.8.1 says to issue first NETWORK_CONNECTION, then
+ /*
+ * 3.8.1 says to issue first NETWORK_CONNECTION, then
* a SPEED_CHANGE. could be useful in some configs.
*/
event = req->buf;
event->bmRequestType = 0xA1;
event->bNotificationType = USB_CDC_NOTIFY_NETWORK_CONNECTION;
- event->wValue = __constant_cpu_to_le16 (1); /* connected */
- event->wIndex = __constant_cpu_to_le16 (1);
+ event->wValue = __constant_cpu_to_le16(1); /* connected */
+ event->wIndex = __constant_cpu_to_le16(1);
event->wLength = 0;
req->length = sizeof *event;
req->complete = eth_status_complete;
req->context = dev;
- value = usb_ep_queue (dev->status_ep, req, GFP_ATOMIC);
+ value = usb_ep_queue(dev->status_ep, req, GFP_ATOMIC);
if (value < 0)
debug("status buf queue --> %d\n", value);
}
@@ -993,7 +1003,7 @@ static void issue_start_status (struct eth_dev *dev)
/*-------------------------------------------------------------------------*/
-static void eth_setup_complete (struct usb_ep *ep, struct usb_request *req)
+static void eth_setup_complete(struct usb_ep *ep, struct usb_request *req)
{
if (req->status || req->actual != req->length)
debug("setup complete --> %d, %d/%d\n",
@@ -1010,16 +1020,17 @@ static void eth_setup_complete (struct usb_ep *ep, struct usb_request *req)
* - class-specific control requests
*/
static int
-eth_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
+eth_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
{
- struct eth_dev *dev = get_gadget_data (gadget);
+ struct eth_dev *dev = get_gadget_data(gadget);
struct usb_request *req = dev->req;
int value = -EOPNOTSUPP;
u16 wIndex = le16_to_cpu(ctrl->wIndex);
u16 wValue = le16_to_cpu(ctrl->wValue);
u16 wLength = le16_to_cpu(ctrl->wLength);
- /* descriptors just go into the pre-allocated ep0 buffer,
+ /*
+ * descriptors just go into the pre-allocated ep0 buffer,
* while config change events may enable network traffic.
*/
@@ -1034,14 +1045,14 @@ eth_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
switch (wValue >> 8) {
case USB_DT_DEVICE:
- value = min (wLength, (u16) sizeof device_desc);
- memcpy (req->buf, &device_desc, value);
+ value = min(wLength, (u16) sizeof device_desc);
+ memcpy(req->buf, &device_desc, value);
break;
case USB_DT_DEVICE_QUALIFIER:
if (!gadget_is_dualspeed(gadget))
break;
- value = min (wLength, (u16) sizeof dev_qualifier);
- memcpy (req->buf, &dev_qualifier, value);
+ value = min(wLength, (u16) sizeof dev_qualifier);
+ memcpy(req->buf, &dev_qualifier, value);
break;
case USB_DT_OTHER_SPEED_CONFIG:
@@ -1054,15 +1065,15 @@ eth_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
wValue & 0xff,
gadget_is_otg(gadget));
if (value >= 0)
- value = min (wLength, (u16) value);
+ value = min(wLength, (u16) value);
break;
case USB_DT_STRING:
- value = usb_gadget_get_string (&stringtab,
+ value = usb_gadget_get_string(&stringtab,
wValue & 0xff, req->buf);
if (value >= 0)
- value = min (wLength, (u16) value);
+ value = min(wLength, (u16) value);
break;
}
@@ -1075,13 +1086,13 @@ eth_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
debug("HNP available\n");
else if (gadget->a_alt_hnp_support)
debug("HNP needs a different root port\n");
- value = eth_set_config (dev, wValue, GFP_ATOMIC);
+ value = eth_set_config(dev, wValue, GFP_ATOMIC);
break;
case USB_REQ_GET_CONFIGURATION:
if (ctrl->bRequestType != USB_DIR_IN)
break;
*(u8 *)req->buf = dev->config;
- value = min (wLength, (u16) 1);
+ value = min(wLength, (u16) 1);
break;
case USB_REQ_SET_INTERFACE:
@@ -1092,11 +1103,12 @@ eth_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
if (!cdc_active(dev) && wIndex != 0)
break;
- /* PXA hardware partially handles SET_INTERFACE;
+ /*
+ * PXA hardware partially handles SET_INTERFACE;
* we need to kluge around that interference.
*/
- if (gadget_is_pxa (gadget)) {
- value = eth_set_config (dev, DEV_CONFIG_VALUE,
+ if (gadget_is_pxa(gadget)) {
+ value = eth_set_config(dev, DEV_CONFIG_VALUE,
GFP_ATOMIC);
goto done_set_intf;
}
@@ -1107,36 +1119,38 @@ eth_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
if (wValue != 0)
break;
if (dev->status) {
- usb_ep_disable (dev->status_ep);
- usb_ep_enable (dev->status_ep, dev->status);
+ usb_ep_disable(dev->status_ep);
+ usb_ep_enable(dev->status_ep, dev->status);
}
value = 0;
break;
case 1: /* data intf */
if (wValue > 1)
break;
- usb_ep_disable (dev->in_ep);
- usb_ep_disable (dev->out_ep);
+ usb_ep_disable(dev->in_ep);
+ usb_ep_disable(dev->out_ep);
- /* CDC requires the data transfers not be done from
+ /*
+ * CDC requires the data transfers not be done from
* the default interface setting ... also, setting
* the non-default interface resets filters etc.
*/
if (wValue == 1) {
- if (!cdc_active (dev))
+ if (!cdc_active(dev))
break;
- usb_ep_enable (dev->in_ep, dev->in);
- usb_ep_enable (dev->out_ep, dev->out);
+ usb_ep_enable(dev->in_ep, dev->in);
+ usb_ep_enable(dev->out_ep, dev->out);
dev->cdc_filter = DEFAULT_FILTER;
if (dev->status)
- issue_start_status (dev);
+ issue_start_status(dev);
}
value = 0;
break;
}
#else
- /* FIXME this is wrong, as is the assumption that
+ /*
+ * FIXME this is wrong, as is the assumption that
* all non-PXA hardware talks real CDC ...
*/
debug("set_interface ignored!\n");
@@ -1160,12 +1174,13 @@ done_set_intf:
/* carrier always ok ...*/
*(u8 *)req->buf = 1 ;
}
- value = min (wLength, (u16) 1);
+ value = min(wLength, (u16) 1);
break;
#ifdef DEV_CONFIG_CDC
case USB_CDC_SET_ETHERNET_PACKET_FILTER:
- /* see 6.2.30: no data, wIndex = interface,
+ /*
+ * see 6.2.30: no data, wIndex = interface,
* wValue = packet filter bitmap
*/
if (ctrl->bRequestType != (USB_TYPE_CLASS|USB_RECIP_INTERFACE)
@@ -1178,7 +1193,8 @@ done_set_intf:
value = 0;
break;
- /* and potentially:
+ /*
+ * and potentially:
* case USB_CDC_SET_ETHERNET_MULTICAST_FILTERS:
* case USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER:
* case USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER:
@@ -1199,11 +1215,11 @@ done_set_intf:
req->length = value;
req->zero = value < wLength
&& (value % gadget->ep0->maxpacket) == 0;
- value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC);
+ value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
if (value < 0) {
debug("ep_queue --> %d\n", value);
req->status = 0;
- eth_setup_complete (gadget->ep0, req);
+ eth_setup_complete(gadget->ep0, req);
}
}
@@ -1211,18 +1227,18 @@ done_set_intf:
return value;
}
-
/*-------------------------------------------------------------------------*/
-static void rx_complete (struct usb_ep *ep, struct usb_request *req);
+static void rx_complete(struct usb_ep *ep, struct usb_request *req);
-static int rx_submit ( struct eth_dev *dev, struct usb_request *req, \
+static int rx_submit(struct eth_dev *dev, struct usb_request *req,
gfp_t gfp_flags)
{
int retval = -ENOMEM;
size_t size;
- /* Padding up to RX_EXTRA handles minor disagreements with host.
+ /*
+ * Padding up to RX_EXTRA handles minor disagreements with host.
* Normally we use the USB "terminate on short read" convention;
* so allow up to (N*maxpacket), since that memory is normally
* already allocated. Some hardware doesn't deal well with short
@@ -1236,8 +1252,8 @@ static int rx_submit ( struct eth_dev *dev, struct usb_request *req, \
size += dev->out_ep->maxpacket - 1;
size -= size % dev->out_ep->maxpacket;
-
- /* Some platforms perform better when IP packets are aligned,
+ /*
+ * Some platforms perform better when IP packets are aligned,
* but on at least one, checksumming fails otherwise.
*/
@@ -1245,37 +1261,35 @@ static int rx_submit ( struct eth_dev *dev, struct usb_request *req, \
req->length = size;
req->complete = rx_complete;
- retval = usb_ep_queue (dev->out_ep, req, gfp_flags);
+ retval = usb_ep_queue(dev->out_ep, req, gfp_flags);
- if (retval) {
+ if (retval)
error("rx submit --> %d", retval);
- }
+
return retval;
}
-
-static void rx_complete (struct usb_ep *ep, struct usb_request *req)
+static void rx_complete(struct usb_ep *ep, struct usb_request *req)
{
struct eth_dev *dev = ep->driver_data;
debug("%s: status %d\n", __func__, req->status);
- packet_received=1;
+ packet_received = 1;
if (req)
- dev->rx_req=req;
+ dev->rx_req = req;
}
-
-static int alloc_requests (struct eth_dev *dev, unsigned n, gfp_t gfp_flags)
+static int alloc_requests(struct eth_dev *dev, unsigned n, gfp_t gfp_flags)
{
- dev->tx_req = usb_ep_alloc_request (dev->in_ep, 0);
+ dev->tx_req = usb_ep_alloc_request(dev->in_ep, 0);
if (!dev->tx_req)
goto fail;
- dev->rx_req = usb_ep_alloc_request (dev->out_ep, 0);
+ dev->rx_req = usb_ep_alloc_request(dev->out_ep, 0);
if (!dev->rx_req)
goto fail;
@@ -1287,17 +1301,16 @@ fail:
return -1;
}
-
-static void tx_complete (struct usb_ep *ep, struct usb_request *req)
+static void tx_complete(struct usb_ep *ep, struct usb_request *req)
{
- debug("%s: status %s\n", __func__, (req->status)?"failed":"ok");
- packet_sent=1;
+ debug("%s: status %s\n", __func__, (req->status) ? "failed" : "ok");
+ packet_sent = 1;
}
-static inline int eth_is_promisc (struct eth_dev *dev)
+static inline int eth_is_promisc(struct eth_dev *dev)
{
/* no filters for the CDC subset; always promisc */
- if (subset_active (dev))
+ if (subset_active(dev))
return 1;
return dev->cdc_filter & USB_CDC_PACKET_TYPE_PROMISCUOUS;
}
@@ -1415,49 +1428,49 @@ drop:
/*-------------------------------------------------------------------------*/
#endif
-static void eth_unbind (struct usb_gadget *gadget)
+static void eth_unbind(struct usb_gadget *gadget)
{
- struct eth_dev *dev = get_gadget_data (gadget);
+ struct eth_dev *dev = get_gadget_data(gadget);
debug("%s...\n", __func__);
/* we've already been disconnected ... no i/o is active */
if (dev->req) {
- usb_ep_free_request (gadget->ep0, dev->req);
+ usb_ep_free_request(gadget->ep0, dev->req);
dev->req = NULL;
}
if (dev->stat_req) {
- usb_ep_free_request (dev->status_ep, dev->stat_req);
+ usb_ep_free_request(dev->status_ep, dev->stat_req);
dev->stat_req = NULL;
}
if (dev->tx_req) {
- usb_ep_free_request (dev->in_ep, dev->tx_req);
- dev->tx_req=NULL;
+ usb_ep_free_request(dev->in_ep, dev->tx_req);
+ dev->tx_req = NULL;
}
if (dev->rx_req) {
- usb_ep_free_request (dev->out_ep, dev->rx_req);
- dev->rx_req=NULL;
+ usb_ep_free_request(dev->out_ep, dev->rx_req);
+ dev->rx_req = NULL;
}
/* unregister_netdev (dev->net);*/
/* free_netdev(dev->net);*/
- set_gadget_data (gadget, NULL);
+ set_gadget_data(gadget, NULL);
}
-static void eth_disconnect (struct usb_gadget *gadget)
+static void eth_disconnect(struct usb_gadget *gadget)
{
- eth_reset_config (get_gadget_data (gadget));
+ eth_reset_config(get_gadget_data(gadget));
}
-static void eth_suspend (struct usb_gadget *gadget)
+static void eth_suspend(struct usb_gadget *gadget)
{
/* Not used */
}
-static void eth_resume (struct usb_gadget *gadget)
+static void eth_resume(struct usb_gadget *gadget)
{
/* Not used */
}
@@ -1492,12 +1505,12 @@ static int is_eth_addr_valid(char *str)
return 0;
}
-static u8 nibble (unsigned char c)
+static u8 nibble(unsigned char c)
{
- if (likely (isdigit (c)))
+ if (likely(isdigit(c)))
return c - '0';
- c = toupper (c);
- if (likely (isxdigit (c)))
+ c = toupper(c);
+ if (likely(isxdigit(c)))
return 10 + c - 'A';
return 0;
}
@@ -1510,13 +1523,13 @@ static int get_ether_addr(const char *str, u8 *dev_addr)
for (i = 0; i < 6; i++) {
unsigned char num;
- if((*str == '.') || (*str == ':'))
+ if ((*str == '.') || (*str == ':'))
str++;
num = nibble(*str++) << 4;
num |= (nibble(*str++));
- dev_addr [i] = num;
+ dev_addr[i] = num;
}
- if (is_valid_ether_addr (dev_addr))
+ if (is_valid_ether_addr(dev_addr))
return 0;
}
return 1;
@@ -1528,17 +1541,18 @@ static int eth_bind(struct usb_gadget *gadget)
u8 cdc = 1, zlp = 1;
struct usb_ep *in_ep, *out_ep, *status_ep = NULL;
int gcnum;
- u8 tmp[7];
+ u8 tmp[7];
/* these flags are only ever cleared; compiler take note */
#ifndef DEV_CONFIG_CDC
cdc = 0;
#endif
- /* Because most host side USB stacks handle CDC Ethernet, that
+ /*
+ * Because most host side USB stacks handle CDC Ethernet, that
* standard protocol is _strongly_ preferred for interop purposes.
* (By everyone except Microsoft.)
*/
- if (gadget_is_pxa (gadget)) {
+ if (gadget_is_pxa(gadget)) {
/* pxa doesn't support altsettings */
cdc = 0;
} else if (gadget_is_musbhdrc(gadget)) {
@@ -1547,20 +1561,22 @@ static int eth_bind(struct usb_gadget *gadget)
} else if (gadget_is_sh(gadget)) {
/* sh doesn't support multiple interfaces or configs */
cdc = 0;
- } else if (gadget_is_sa1100 (gadget)) {
+ } else if (gadget_is_sa1100(gadget)) {
/* hardware can't write zlps */
zlp = 0;
- /* sa1100 CAN do CDC, without status endpoint ... we use
+ /*
+ * sa1100 CAN do CDC, without status endpoint ... we use
* non-CDC to be compatible with ARM Linux-2.4 "usb-eth".
*/
cdc = 0;
}
- gcnum = usb_gadget_controller_number (gadget);
+ gcnum = usb_gadget_controller_number(gadget);
if (gcnum >= 0)
- device_desc.bcdDevice = cpu_to_le16 (0x0300 + gcnum);
+ device_desc.bcdDevice = cpu_to_le16(0x0300 + gcnum);
else {
- /* can't assume CDC works. don't want to default to
+ /*
+ * can't assume CDC works. don't want to default to
* anything less functional on CDC-capable hardware,
* so we fail in this case.
*/
@@ -1569,7 +1585,8 @@ static int eth_bind(struct usb_gadget *gadget)
return -ENODEV;
}
- /* CDC subset ... recognized by Linux since 2.4.10, but Windows
+ /*
+ * CDC subset ... recognized by Linux since 2.4.10, but Windows
* drivers aren't widely available. (That may be improved by
* supporting one submode of the "SAFE" variant of MDLM.)
*/
@@ -1588,17 +1605,17 @@ static int eth_bind(struct usb_gadget *gadget)
if (bcdDevice)
device_desc.bcdDevice = cpu_to_le16(bcdDevice);
if (iManufacturer)
- strlcpy (manufacturer, iManufacturer, sizeof manufacturer);
+ strlcpy(manufacturer, iManufacturer, sizeof manufacturer);
if (iProduct)
- strlcpy (product_desc, iProduct, sizeof product_desc);
+ strlcpy(product_desc, iProduct, sizeof product_desc);
if (iSerialNumber) {
device_desc.iSerialNumber = STRING_SERIALNUMBER,
strlcpy(serial_number, iSerialNumber, sizeof serial_number);
}
/* all we really need is bulk IN/OUT */
- usb_ep_autoconfig_reset (gadget);
- in_ep = usb_ep_autoconfig (gadget, &fs_source_desc);
+ usb_ep_autoconfig_reset(gadget);
+ in_ep = usb_ep_autoconfig(gadget, &fs_source_desc);
if (!in_ep) {
autoconf_fail:
error("can't autoconfigure on %s\n",
@@ -1607,17 +1624,18 @@ autoconf_fail:
}
in_ep->driver_data = in_ep; /* claim */
- out_ep = usb_ep_autoconfig (gadget, &fs_sink_desc);
+ out_ep = usb_ep_autoconfig(gadget, &fs_sink_desc);
if (!out_ep)
goto autoconf_fail;
out_ep->driver_data = out_ep; /* claim */
#if defined(DEV_CONFIG_CDC)
- /* CDC Ethernet control interface doesn't require a status endpoint.
+ /*
+ * CDC Ethernet control interface doesn't require a status endpoint.
* Since some hosts expect one, try to allocate one anyway.
*/
if (cdc) {
- status_ep = usb_ep_autoconfig (gadget, &fs_status_desc);
+ status_ep = usb_ep_autoconfig(gadget, &fs_status_desc);
if (status_ep) {
status_ep->driver_data = status_ep; /* claim */
} else if (cdc) {
@@ -1632,7 +1650,8 @@ autoconf_fail:
eth_config.bNumInterfaces = 1;
eth_config.iConfiguration = STRING_SUBSET;
- /* use functions to set these up, in case we're built to work
+ /*
+ * use functions to set these up, in case we're built to work
* with multiple controllers and must override CDC Ethernet.
*/
fs_subset_descriptors();
@@ -1640,7 +1659,7 @@ autoconf_fail:
}
device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
- usb_gadget_set_selfpowered (gadget);
+ usb_gadget_set_selfpowered(gadget);
if (gadget_is_dualspeed(gadget)) {
if (!cdc)
@@ -1668,7 +1687,7 @@ autoconf_fail:
}
dev->net = &l_netdev;
- strcpy (dev->net->name, USB_NET_NAME);
+ strcpy(dev->net->name, USB_NET_NAME);
dev->cdc = cdc;
dev->zlp = zlp;
@@ -1677,7 +1696,8 @@ autoconf_fail:
dev->out_ep = out_ep;
dev->status_ep = status_ep;
- /* Module params for these addresses should come from ID proms.
+ /*
+ * Module params for these addresses should come from ID proms.
* The host side address is used with CDC, and commonly
* ends up in a persistent config database. It's not clear if
* host side code for the SAFE thing cares -- its original BLAN
@@ -1690,10 +1710,10 @@ autoconf_fail:
get_ether_addr(host_addr, dev->host_mac);
- sprintf (ethaddr, "%02X%02X%02X%02X%02X%02X",
- dev->host_mac [0], dev->host_mac [1],
- dev->host_mac [2], dev->host_mac [3],
- dev->host_mac [4], dev->host_mac [5]);
+ sprintf(ethaddr, "%02X%02X%02X%02X%02X%02X",
+ dev->host_mac[0], dev->host_mac[1],
+ dev->host_mac[2], dev->host_mac[3],
+ dev->host_mac[4], dev->host_mac[5]);
printf("using %s, OUT %s IN %s%s%s\n", gadget->name,
out_ep->name, in_ep->name,
@@ -1701,23 +1721,25 @@ autoconf_fail:
status_ep ? status_ep->name : ""
);
printf("MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
- dev->net->enetaddr [0], dev->net->enetaddr [1],
- dev->net->enetaddr [2], dev->net->enetaddr [3],
- dev->net->enetaddr [4], dev->net->enetaddr [5]);
+ dev->net->enetaddr[0], dev->net->enetaddr[1],
+ dev->net->enetaddr[2], dev->net->enetaddr[3],
+ dev->net->enetaddr[4], dev->net->enetaddr[5]);
if (cdc) {
printf("HOST MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
- dev->host_mac [0], dev->host_mac [1],
- dev->host_mac [2], dev->host_mac [3],
- dev->host_mac [4], dev->host_mac [5]);
+ dev->host_mac[0], dev->host_mac[1],
+ dev->host_mac[2], dev->host_mac[3],
+ dev->host_mac[4], dev->host_mac[5]);
}
- /* use PKTSIZE (or aligned... from u-boot) and set
- * wMaxSegmentSize accordingly*/
+ /*
+ * use PKTSIZE (or aligned... from u-boot) and set
+ * wMaxSegmentSize accordingly
+ */
dev->mtu = PKTSIZE_ALIGN; /* RNDIS does not like this, only 1514, TODO*/
/* preallocate control message data and buffer */
- dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL);
+ dev->req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL);
if (!dev->req)
goto fail;
dev->req->buf = control_req;
@@ -1726,9 +1748,10 @@ autoconf_fail:
/* ... and maybe likewise for status transfer */
#if defined(DEV_CONFIG_CDC)
if (dev->status_ep) {
- dev->stat_req = usb_ep_alloc_request(dev->status_ep, GFP_KERNEL);
+ dev->stat_req = usb_ep_alloc_request(dev->status_ep,
+ GFP_KERNEL);
if (!dev->stat_req) {
- usb_ep_free_request (dev->status_ep, dev->req);
+ usb_ep_free_request(dev->status_ep, dev->req);
goto fail;
}
@@ -1739,10 +1762,11 @@ autoconf_fail:
/* finish hookup to lower layer ... */
dev->gadget = gadget;
- set_gadget_data (gadget, dev);
+ set_gadget_data(gadget, dev);
gadget->ep0->driver_data = dev;
- /* two kinds of host-initiated state changes:
+ /*
+ * two kinds of host-initiated state changes:
* - iff DATA transfer is active, carrier is "on"
* - tx queueing enabled if open *and* carrier is "on"
*/
@@ -1750,13 +1774,13 @@ autoconf_fail:
fail:
error("%s failed", __func__);
- eth_unbind (gadget);
+ eth_unbind(gadget);
return -ENOMEM;
}
-static int usb_eth_init(struct eth_device* netdev, bd_t* bd)
+static int usb_eth_init(struct eth_device *netdev, bd_t *bd)
{
- struct eth_dev *dev=&l_ethdev;
+ struct eth_dev *dev = &l_ethdev;
struct usb_gadget *gadget;
unsigned long ts;
unsigned long timeout = USB_CONNECT_TIMEOUT;
@@ -1780,8 +1804,7 @@ static int usb_eth_init(struct eth_device* netdev, bd_t* bd)
timeout = simple_strtoul(getenv("cdc_connect_timeout"),
NULL, 10) * CONFIG_SYS_HZ;
ts = get_timer(0);
- while (!l_ethdev.network_started)
- {
+ while (!l_ethdev.network_started) {
/* Handle control-c and timeouts */
if (ctrlc() || (get_timer(ts) > timeout)) {
error("The remote end did not respond in time.");
@@ -1790,19 +1813,20 @@ static int usb_eth_init(struct eth_device* netdev, bd_t* bd)
usb_gadget_handle_interrupts();
}
- rx_submit (dev, dev->rx_req, 0);
+ rx_submit(dev, dev->rx_req, 0);
return 0;
fail:
return -1;
}
-static int usb_eth_send(struct eth_device* netdev, volatile void* packet, int length)
+static int usb_eth_send(struct eth_device *netdev,
+ volatile void *packet, int length)
{
int retval;
struct usb_request *req = NULL;
struct eth_dev *dev = &l_ethdev;
- unsigned long ts;
- unsigned long timeout = USB_CONNECT_TIMEOUT;
+ unsigned long ts;
+ unsigned long timeout = USB_CONNECT_TIMEOUT;
debug("%s:...\n", __func__);
@@ -1812,7 +1836,8 @@ static int usb_eth_send(struct eth_device* netdev, volatile void* packet, int le
req->context = NULL;
req->complete = tx_complete;
- /* use zlp framing on tx for strict CDC-Ether conformance,
+ /*
+ * use zlp framing on tx for strict CDC-Ether conformance,
* though any robust network rx path ignores extra padding.
* and some hardware doesn't like to write zlps.
*/
@@ -1827,54 +1852,50 @@ static int usb_eth_send(struct eth_device* netdev, volatile void* packet, int le
req->no_interrupt = (dev->gadget->speed == USB_SPEED_HIGH)
? ((dev->tx_qlen % qmult) != 0) : 0;
#endif
- dev->tx_qlen=1;
- ts = get_timer(0);
- packet_sent = 0;
+ dev->tx_qlen = 1;
+ ts = get_timer(0);
+ packet_sent = 0;
- retval = usb_ep_queue (dev->in_ep, req, GFP_ATOMIC);
+ retval = usb_ep_queue(dev->in_ep, req, GFP_ATOMIC);
if (!retval)
debug("%s: packet queued\n", __func__);
- while(!packet_sent)
- {
- if (get_timer(ts) > timeout) {
- printf("timeout sending packets to usb ethernet\n");
- return -1;
- }
- usb_gadget_handle_interrupts();
+ while (!packet_sent) {
+ if (get_timer(ts) > timeout) {
+ printf("timeout sending packets to usb ethernet\n");
+ return -1;
+ }
+ usb_gadget_handle_interrupts();
}
return 0;
}
-static int usb_eth_recv(struct eth_device* netdev)
+static int usb_eth_recv(struct eth_device *netdev)
{
struct eth_dev *dev = &l_ethdev;
usb_gadget_handle_interrupts();
- if (packet_received)
- {
- debug("%s: packet received \n", __func__);
- if (dev->rx_req)
- {
- NetReceive(NetRxPackets[0],dev->rx_req->length);
- packet_received=0;
+ if (packet_received) {
+ debug("%s: packet received\n", __func__);
+ if (dev->rx_req) {
+ NetReceive(NetRxPackets[0], dev->rx_req->length);
+ packet_received = 0;
if (dev->rx_req)
- rx_submit (dev, dev->rx_req, 0);
- }
- else error("dev->rx_req invalid");
+ rx_submit(dev, dev->rx_req, 0);
+ } else
+ error("dev->rx_req invalid");
}
return 0;
}
-void usb_eth_halt(struct eth_device* netdev)
+void usb_eth_halt(struct eth_device *netdev)
{
- struct eth_dev *dev =&l_ethdev;
+ struct eth_dev *dev = &l_ethdev;
- if (!netdev)
- {
+ if (!netdev) {
error("received NULL ptr");
return;
}
@@ -1898,9 +1919,9 @@ static struct usb_gadget_driver eth_driver = {
int usb_eth_initialize(bd_t *bi)
{
int status = 0;
- struct eth_device *netdev=&l_netdev;
+ struct eth_device *netdev = &l_netdev;
- sprintf(netdev->name,"usb_ether");
+ sprintf(netdev->name, "usb_ether");
netdev->init = usb_eth_init;
netdev->send = usb_eth_send;
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index 480bc87..9bb7e2e 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -15,109 +15,109 @@
* Remy Bohmer <linux@bohmer.net>
*/
#ifdef CONFIG_USB_GADGET_NET2280
-#define gadget_is_net2280(g) !strcmp("net2280", (g)->name)
+#define gadget_is_net2280(g) (!strcmp("net2280", (g)->name))
#else
#define gadget_is_net2280(g) 0
#endif
#ifdef CONFIG_USB_GADGET_AMD5536UDC
-#define gadget_is_amd5536udc(g) !strcmp("amd5536udc", (g)->name)
+#define gadget_is_amd5536udc(g) (!strcmp("amd5536udc", (g)->name))
#else
#define gadget_is_amd5536udc(g) 0
#endif
#ifdef CONFIG_USB_GADGET_DUMMY_HCD
-#define gadget_is_dummy(g) !strcmp("dummy_udc", (g)->name)
+#define gadget_is_dummy(g) (!strcmp("dummy_udc", (g)->name))
#else
#define gadget_is_dummy(g) 0
#endif
#ifdef CONFIG_USB_GADGET_PXA2XX
-#define gadget_is_pxa(g) !strcmp("pxa2xx_udc", (g)->name)
+#define gadget_is_pxa(g) (!strcmp("pxa2xx_udc", (g)->name))
#else
#define gadget_is_pxa(g) 0
#endif
#ifdef CONFIG_USB_GADGET_GOKU
-#define gadget_is_goku(g) !strcmp("goku_udc", (g)->name)
+#define gadget_is_goku(g) (!strcmp("goku_udc", (g)->name))
#else
#define gadget_is_goku(g) 0
#endif
/* SH3 UDC -- not yet ported 2.4 --> 2.6 */
#ifdef CONFIG_USB_GADGET_SUPERH
-#define gadget_is_sh(g) !strcmp("sh_udc", (g)->name)
+#define gadget_is_sh(g) (!strcmp("sh_udc", (g)->name))
#else
#define gadget_is_sh(g) 0
#endif
/* not yet stable on 2.6 (would help "original Zaurus") */
#ifdef CONFIG_USB_GADGET_SA1100
-#define gadget_is_sa1100(g) !strcmp("sa1100_udc", (g)->name)
+#define gadget_is_sa1100(g) (!strcmp("sa1100_udc", (g)->name))
#else
#define gadget_is_sa1100(g) 0
#endif
#ifdef CONFIG_USB_GADGET_LH7A40X
-#define gadget_is_lh7a40x(g) !strcmp("lh7a40x_udc", (g)->name)
+#define gadget_is_lh7a40x(g) (!strcmp("lh7a40x_udc", (g)->name))
#else
#define gadget_is_lh7a40x(g) 0
#endif
/* handhelds.org tree (?) */
#ifdef CONFIG_USB_GADGET_MQ11XX
-#define gadget_is_mq11xx(g) !strcmp("mq11xx_udc", (g)->name)
+#define gadget_is_mq11xx(g) (!strcmp("mq11xx_udc", (g)->name))
#else
#define gadget_is_mq11xx(g) 0
#endif
#ifdef CONFIG_USB_GADGET_OMAP
-#define gadget_is_omap(g) !strcmp("omap_udc", (g)->name)
+#define gadget_is_omap(g) (!strcmp("omap_udc", (g)->name))
#else
#define gadget_is_omap(g) 0
#endif
/* not yet ported 2.4 --> 2.6 */
#ifdef CONFIG_USB_GADGET_N9604
-#define gadget_is_n9604(g) !strcmp("n9604_udc", (g)->name)
+#define gadget_is_n9604(g) (!strcmp("n9604_udc", (g)->name))
#else
#define gadget_is_n9604(g) 0
#endif
/* various unstable versions available */
#ifdef CONFIG_USB_GADGET_PXA27X
-#define gadget_is_pxa27x(g) !strcmp("pxa27x_udc", (g)->name)
+#define gadget_is_pxa27x(g) (!strcmp("pxa27x_udc", (g)->name))
#else
#define gadget_is_pxa27x(g) 0
#endif
#ifdef CONFIG_USB_GADGET_ATMEL_USBA
-#define gadget_is_atmel_usba(g) !strcmp("atmel_usba_udc", (g)->name)
+#define gadget_is_atmel_usba(g) (!strcmp("atmel_usba_udc", (g)->name))
#else
#define gadget_is_atmel_usba(g) 0
#endif
#ifdef CONFIG_USB_GADGET_S3C2410
-#define gadget_is_s3c2410(g) !strcmp("s3c2410_udc", (g)->name)
+#define gadget_is_s3c2410(g) (!strcmp("s3c2410_udc", (g)->name))
#else
#define gadget_is_s3c2410(g) 0
#endif
#ifdef CONFIG_USB_GADGET_AT91
-#define gadget_is_at91(g) !strcmp("at91_udc", (g)->name)
+#define gadget_is_at91(g) (!strcmp("at91_udc", (g)->name))
#else
#define gadget_is_at91(g) 0
#endif
/* status unclear */
#ifdef CONFIG_USB_GADGET_IMX
-#define gadget_is_imx(g) !strcmp("imx_udc", (g)->name)
+#define gadget_is_imx(g) (!strcmp("imx_udc", (g)->name))
#else
#define gadget_is_imx(g) 0
#endif
#ifdef CONFIG_USB_GADGET_FSL_USB2
-#define gadget_is_fsl_usb2(g) !strcmp("fsl-usb2-udc", (g)->name)
+#define gadget_is_fsl_usb2(g) (!strcmp("fsl-usb2-udc", (g)->name))
#else
#define gadget_is_fsl_usb2(g) 0
#endif
@@ -125,36 +125,37 @@
/* Mentor high speed function controller */
/* from Montavista kernel (?) */
#ifdef CONFIG_USB_GADGET_MUSBHSFC
-#define gadget_is_musbhsfc(g) !strcmp("musbhsfc_udc", (g)->name)
+#define gadget_is_musbhsfc(g) (!strcmp("musbhsfc_udc", (g)->name))
#else
#define gadget_is_musbhsfc(g) 0
#endif
/* Mentor high speed "dual role" controller, in peripheral role */
#ifdef CONFIG_USB_GADGET_MUSB_HDRC
-#define gadget_is_musbhdrc(g) !strcmp("musb_hdrc", (g)->name)
+#define gadget_is_musbhdrc(g) (!strcmp("musb_hdrc", (g)->name))
#else
#define gadget_is_musbhdrc(g) 0
#endif
/* from Montavista kernel (?) */
#ifdef CONFIG_USB_GADGET_MPC8272
-#define gadget_is_mpc8272(g) !strcmp("mpc8272_udc", (g)->name)
+#define gadget_is_mpc8272(g) (!strcmp("mpc8272_udc", (g)->name))
#else
#define gadget_is_mpc8272(g) 0
#endif
#ifdef CONFIG_USB_GADGET_M66592
-#define gadget_is_m66592(g) !strcmp("m66592_udc", (g)->name)
+#define gadget_is_m66592(g) (!strcmp("m66592_udc", (g)->name))
#else
#define gadget_is_m66592(g) 0
#endif
-// CONFIG_USB_GADGET_SX2
-// CONFIG_USB_GADGET_AU1X00
-// ...
-
+/*
+ * CONFIG_USB_GADGET_SX2
+ * CONFIG_USB_GADGET_AU1X00
+ * ...
+ */
/**
* usb_gadget_controller_number - support bcdDevice id convention
diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c
index 168f75f..6e9d1bf 100644
--- a/drivers/usb/gadget/usbstring.c
+++ b/drivers/usb/gadget/usbstring.c
@@ -24,14 +24,17 @@ static int utf8_to_utf16le(const char *s, __le16 *cp, unsigned len)
u8 c;
u16 uchar;
- /* this insists on correct encodings, though not minimal ones.
+ /*
+ * this insists on correct encodings, though not minimal ones.
* BUT it currently rejects legit 4-byte UTF-8 code points,
* which need surrogate pairs. (Unicode 3.1 can use them.)
*/
while (len != 0 && (c = (u8) *s++) != 0) {
if ((c & 0x80)) {
- // 2-byte sequence:
- // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx
+ /*
+ * 2-byte sequence:
+ * 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx
+ */
if ((c & 0xe0) == 0xc0) {
uchar = (c & 0x1f) << 6;
@@ -41,8 +44,10 @@ static int utf8_to_utf16le(const char *s, __le16 *cp, unsigned len)
c &= 0x3f;
uchar |= c;
- // 3-byte sequence (most CJKV characters):
- // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx
+ /*
+ * 3-byte sequence (most CJKV characters):
+ * zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx
+ */
} else if ((c & 0xf0) == 0xe0) {
uchar = (c & 0x0f) << 12;
@@ -62,12 +67,13 @@ static int utf8_to_utf16le(const char *s, __le16 *cp, unsigned len)
if (0xd800 <= uchar && uchar <= 0xdfff)
goto fail;
- // 4-byte sequence (surrogate pairs, currently rare):
- // 11101110wwwwzzzzyy + 110111yyyyxxxxxx
- // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx
- // (uuuuu = wwww + 1)
- // FIXME accept the surrogate code points (only)
-
+ /*
+ * 4-byte sequence (surrogate pairs, currently rare):
+ * 11101110wwwwzzzzyy + 110111yyyyxxxxxx
+ * = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx
+ * (uuuuu = wwww + 1)
+ * FIXME accept the surrogate code points (only)
+ */
} else
goto fail;
} else
@@ -100,17 +106,17 @@ fail:
* characters (which are also widely used in C strings).
*/
int
-usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf)
+usb_gadget_get_string(struct usb_gadget_strings *table, int id, u8 *buf)
{
struct usb_string *s;
int len;
/* descriptor 0 has the language id */
if (id == 0) {
- buf [0] = 4;
- buf [1] = USB_DT_STRING;
- buf [2] = (u8) table->language;
- buf [3] = (u8) (table->language >> 8);
+ buf[0] = 4;
+ buf[1] = USB_DT_STRING;
+ buf[2] = (u8) table->language;
+ buf[3] = (u8) (table->language >> 8);
return 4;
}
for (s = table->strings; s && s->s; s++)
@@ -122,13 +128,13 @@ usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf)
return -EINVAL;
/* string descriptors have length, tag, then UTF16-LE text */
- len = min ((size_t) 126, strlen (s->s));
- memset (buf + 2, 0, 2 * len); /* zero all the bytes */
+ len = min((size_t) 126, strlen(s->s));
+ memset(buf + 2, 0, 2 * len); /* zero all the bytes */
len = utf8_to_utf16le(s->s, (__le16 *)&buf[2], len);
if (len < 0)
return -EINVAL;
- buf [0] = (len + 1) * 2;
- buf [1] = USB_DT_STRING;
- return buf [0];
+ buf[0] = (len + 1) * 2;
+ buf[1] = USB_DT_STRING;
+ return buf[0];
}
diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h
index 9b129c9..03541cb 100644
--- a/include/linux/usb/cdc.h
+++ b/include/linux/usb/cdc.h
@@ -34,16 +34,16 @@
* Class-Specific descriptors ... there are a couple dozen of them
*/
-#define USB_CDC_HEADER_TYPE 0x00 /* header_desc */
-#define USB_CDC_CALL_MANAGEMENT_TYPE 0x01 /* call_mgmt_descriptor */
-#define USB_CDC_ACM_TYPE 0x02 /* acm_descriptor */
-#define USB_CDC_UNION_TYPE 0x06 /* union_desc */
+#define USB_CDC_HEADER_TYPE 0x00 /* header_desc */
+#define USB_CDC_CALL_MANAGEMENT_TYPE 0x01 /* call_mgmt_descriptor */
+#define USB_CDC_ACM_TYPE 0x02 /* acm_descriptor */
+#define USB_CDC_UNION_TYPE 0x06 /* union_desc */
#define USB_CDC_COUNTRY_TYPE 0x07
-#define USB_CDC_NETWORK_TERMINAL_TYPE 0x0a /* network_terminal_desc */
-#define USB_CDC_ETHERNET_TYPE 0x0f /* ether_desc */
+#define USB_CDC_NETWORK_TERMINAL_TYPE 0x0a /* network_terminal_desc */
+#define USB_CDC_ETHERNET_TYPE 0x0f /* ether_desc */
#define USB_CDC_WHCM_TYPE 0x11
-#define USB_CDC_MDLM_TYPE 0x12 /* mdlm_desc */
-#define USB_CDC_MDLM_DETAIL_TYPE 0x13 /* mdlm_detail_desc */
+#define USB_CDC_MDLM_TYPE 0x12 /* mdlm_desc */
+#define USB_CDC_MDLM_DETAIL_TYPE 0x13 /* mdlm_detail_desc */
#define USB_CDC_DMM_TYPE 0x14
#define USB_CDC_OBEX_TYPE 0x15
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index 1091692..49b7483 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -69,8 +69,8 @@
#define USB_RECIP_ENDPOINT 0x02
#define USB_RECIP_OTHER 0x03
/* From Wireless USB 1.0 */
-#define USB_RECIP_PORT 0x04
-#define USB_RECIP_RPIPE 0x05
+#define USB_RECIP_PORT 0x04
+#define USB_RECIP_RPIPE 0x05
/*
* Standard requests, for the bRequest field of a SETUP packet.
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 344fc78..275cb5f 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -73,9 +73,10 @@ struct usb_ep;
*
* Bulk endpoints can use any size buffers, and can also be used for interrupt
* transfers. interrupt-only endpoints can be much less functional.
+ *
+ * NOTE: this is analagous to 'struct urb' on the host side, except that
+ * it's thinner and promotes more pre-allocation.
*/
- // NOTE this is analagous to 'struct urb' on the host side,
- // except that it's thinner and promotes more pre-allocation.
struct usb_request {
void *buf;
@@ -170,10 +171,10 @@ struct usb_ep {
*
* returns zero, or a negative error code.
*/
-static inline int
-usb_ep_enable (struct usb_ep *ep, const struct usb_endpoint_descriptor *desc)
+static inline int usb_ep_enable(struct usb_ep *ep,
+ const struct usb_endpoint_descriptor *desc)
{
- return ep->ops->enable (ep, desc);
+ return ep->ops->enable(ep, desc);
}
/**
@@ -188,10 +189,9 @@ usb_ep_enable (struct usb_ep *ep, const struct usb_endpoint_descriptor *desc)
*
* returns zero, or a negative error code.
*/
-static inline int
-usb_ep_disable (struct usb_ep *ep)
+static inline int usb_ep_disable(struct usb_ep *ep)
{
- return ep->ops->disable (ep);
+ return ep->ops->disable(ep);
}
/**
@@ -208,10 +208,10 @@ usb_ep_disable (struct usb_ep *ep)
*
* Returns the request, or null if one could not be allocated.
*/
-static inline struct usb_request *
-usb_ep_alloc_request (struct usb_ep *ep, gfp_t gfp_flags)
+static inline struct usb_request *usb_ep_alloc_request(struct usb_ep *ep,
+ gfp_t gfp_flags)
{
- return ep->ops->alloc_request (ep, gfp_flags);
+ return ep->ops->alloc_request(ep, gfp_flags);
}
/**
@@ -223,10 +223,10 @@ usb_ep_alloc_request (struct usb_ep *ep, gfp_t gfp_flags)
* Caller guarantees the request is not queued, and that it will
* no longer be requeued (or otherwise used).
*/
-static inline void
-usb_ep_free_request (struct usb_ep *ep, struct usb_request *req)
+static inline void usb_ep_free_request(struct usb_ep *ep,
+ struct usb_request *req)
{
- ep->ops->free_request (ep, req);
+ ep->ops->free_request(ep, req);
}
/**
@@ -283,10 +283,10 @@ usb_ep_free_request (struct usb_ep *ep, struct usb_request *req)
* report errors; errors will also be
* reported when the usb peripheral is disconnected.
*/
-static inline int
-usb_ep_queue (struct usb_ep *ep, struct usb_request *req, gfp_t gfp_flags)
+static inline int usb_ep_queue(struct usb_ep *ep,
+ struct usb_request *req, gfp_t gfp_flags)
{
- return ep->ops->queue (ep, req, gfp_flags);
+ return ep->ops->queue(ep, req, gfp_flags);
}
/**
@@ -303,9 +303,9 @@ usb_ep_queue (struct usb_ep *ep, struct usb_request *req, gfp_t gfp_flags)
* restrictions prevent drivers from supporting configuration changes,
* even to configuration zero (a "chapter 9" requirement).
*/
-static inline int usb_ep_dequeue (struct usb_ep *ep, struct usb_request *req)
+static inline int usb_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
{
- return ep->ops->dequeue (ep, req);
+ return ep->ops->dequeue(ep, req);
}
/**
@@ -329,10 +329,9 @@ static inline int usb_ep_dequeue (struct usb_ep *ep, struct usb_request *req)
* transfer requests are still queued, or if the controller hardware
* (usually a FIFO) still holds bytes that the host hasn't collected.
*/
-static inline int
-usb_ep_set_halt (struct usb_ep *ep)
+static inline int usb_ep_set_halt(struct usb_ep *ep)
{
- return ep->ops->set_halt (ep, 1);
+ return ep->ops->set_halt(ep, 1);
}
/**
@@ -348,10 +347,9 @@ usb_ep_set_halt (struct usb_ep *ep)
* Note that some hardware can't support this request (like pxa2xx_udc),
* and accordingly can't correctly implement interface altsettings.
*/
-static inline int
-usb_ep_clear_halt (struct usb_ep *ep)
+static inline int usb_ep_clear_halt(struct usb_ep *ep)
{
- return ep->ops->set_halt (ep, 0);
+ return ep->ops->set_halt(ep, 0);
}
/**
@@ -369,11 +367,10 @@ usb_ep_clear_halt (struct usb_ep *ep)
* errno if the endpoint doesn't use a FIFO or doesn't support such
* precise handling.
*/
-static inline int
-usb_ep_fifo_status (struct usb_ep *ep)
+static inline int usb_ep_fifo_status(struct usb_ep *ep)
{
if (ep->ops->fifo_status)
- return ep->ops->fifo_status (ep);
+ return ep->ops->fifo_status(ep);
else
return -EOPNOTSUPP;
}
@@ -387,11 +384,10 @@ usb_ep_fifo_status (struct usb_ep *ep)
* must never be used except when endpoint is not being used for any
* protocol translation.
*/
-static inline void
-usb_ep_fifo_flush (struct usb_ep *ep)
+static inline void usb_ep_fifo_flush(struct usb_ep *ep)
{
if (ep->ops->fifo_flush)
- ep->ops->fifo_flush (ep);
+ ep->ops->fifo_flush(ep);
}
@@ -475,18 +471,18 @@ struct usb_gadget {
struct device dev;
};
-static inline void set_gadget_data (struct usb_gadget *gadget, void *data)
+static inline void set_gadget_data(struct usb_gadget *gadget, void *data)
{
gadget->dev.driver_data = data;
}
-static inline void *get_gadget_data (struct usb_gadget *gadget)
+static inline void *get_gadget_data(struct usb_gadget *gadget)
{
return gadget->dev.driver_data;
}
/* iterates the non-control endpoints; 'tmp' is a struct usb_ep pointer */
-#define gadget_for_each_ep(tmp,gadget) \
+#define gadget_for_each_ep(tmp, gadget) \
list_for_each_entry(tmp, &(gadget)->ep_list, ep_list)
@@ -522,7 +518,6 @@ static inline int gadget_is_otg(struct usb_gadget *g)
#endif
}
-
/**
* usb_gadget_frame_number - returns the current frame number
* @gadget: controller that reports the frame number
@@ -530,9 +525,9 @@ static inline int gadget_is_otg(struct usb_gadget *g)
* Returns the usb frame number, normally eleven bits from a SOF packet,
* or negative errno if this device doesn't support this capability.
*/
-static inline int usb_gadget_frame_number (struct usb_gadget *gadget)
+static inline int usb_gadget_frame_number(struct usb_gadget *gadget)
{
- return gadget->ops->get_frame (gadget);
+ return gadget->ops->get_frame(gadget);
}
/**
@@ -548,11 +543,11 @@ static inline int usb_gadget_frame_number (struct usb_gadget *gadget)
* even if OTG isn't otherwise in use. OTG devices may also start
* remote wakeup even when hosts don't explicitly enable it.
*/
-static inline int usb_gadget_wakeup (struct usb_gadget *gadget)
+static inline int usb_gadget_wakeup(struct usb_gadget *gadget)
{
if (!gadget->ops->wakeup)
return -EOPNOTSUPP;
- return gadget->ops->wakeup (gadget);
+ return gadget->ops->wakeup(gadget);
}
/**
@@ -564,12 +559,11 @@ static inline int usb_gadget_wakeup (struct usb_gadget *gadget)
*
* returns zero on success, else negative errno.
*/
-static inline int
-usb_gadget_set_selfpowered (struct usb_gadget *gadget)
+static inline int usb_gadget_set_selfpowered(struct usb_gadget *gadget)
{
if (!gadget->ops->set_selfpowered)
return -EOPNOTSUPP;
- return gadget->ops->set_selfpowered (gadget, 1);
+ return gadget->ops->set_selfpowered(gadget, 1);
}
/**
@@ -582,12 +576,11 @@ usb_gadget_set_selfpowered (struct usb_gadget *gadget)
*
* returns zero on success, else negative errno.
*/
-static inline int
-usb_gadget_clear_selfpowered (struct usb_gadget *gadget)
+static inline int usb_gadget_clear_selfpowered(struct usb_gadget *gadget)
{
if (!gadget->ops->set_selfpowered)
return -EOPNOTSUPP;
- return gadget->ops->set_selfpowered (gadget, 0);
+ return gadget->ops->set_selfpowered(gadget, 0);
}
/**
@@ -602,12 +595,11 @@ usb_gadget_clear_selfpowered (struct usb_gadget *gadget)
*
* Returns zero on success, else negative errno.
*/
-static inline int
-usb_gadget_vbus_connect(struct usb_gadget *gadget)
+static inline int usb_gadget_vbus_connect(struct usb_gadget *gadget)
{
if (!gadget->ops->vbus_session)
return -EOPNOTSUPP;
- return gadget->ops->vbus_session (gadget, 1);
+ return gadget->ops->vbus_session(gadget, 1);
}
/**
@@ -622,12 +614,11 @@ usb_gadget_vbus_connect(struct usb_gadget *gadget)
*
* Returns zero on success, else negative errno.
*/
-static inline int
-usb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
+static inline int usb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
{
if (!gadget->ops->vbus_draw)
return -EOPNOTSUPP;
- return gadget->ops->vbus_draw (gadget, mA);
+ return gadget->ops->vbus_draw(gadget, mA);
}
/**
@@ -640,12 +631,11 @@ usb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
*
* Returns zero on success, else negative errno.
*/
-static inline int
-usb_gadget_vbus_disconnect(struct usb_gadget *gadget)
+static inline int usb_gadget_vbus_disconnect(struct usb_gadget *gadget)
{
if (!gadget->ops->vbus_session)
return -EOPNOTSUPP;
- return gadget->ops->vbus_session (gadget, 0);
+ return gadget->ops->vbus_session(gadget, 0);
}
/**
@@ -659,12 +649,11 @@ usb_gadget_vbus_disconnect(struct usb_gadget *gadget)
*
* Returns zero on success, else negative errno.
*/
-static inline int
-usb_gadget_connect (struct usb_gadget *gadget)
+static inline int usb_gadget_connect(struct usb_gadget *gadget)
{
if (!gadget->ops->pullup)
return -EOPNOTSUPP;
- return gadget->ops->pullup (gadget, 1);
+ return gadget->ops->pullup(gadget, 1);
}
/**
@@ -682,16 +671,14 @@ usb_gadget_connect (struct usb_gadget *gadget)
*
* Returns zero on success, else negative errno.
*/
-static inline int
-usb_gadget_disconnect (struct usb_gadget *gadget)
+static inline int usb_gadget_disconnect(struct usb_gadget *gadget)
{
if (!gadget->ops->pullup)
return -EOPNOTSUPP;
- return gadget->ops->pullup (gadget, 0);
+ return gadget->ops->pullup(gadget, 0);
}
-
/*-------------------------------------------------------------------------*/
/**
@@ -774,7 +761,6 @@ struct usb_gadget_driver {
};
-
/*-------------------------------------------------------------------------*/
/* driver modules register and unregister, as usual.
@@ -795,7 +781,7 @@ struct usb_gadget_driver {
* the bind() functions will be in init sections.
* This function must be called in a context that can sleep.
*/
-int usb_gadget_register_driver (struct usb_gadget_driver *driver);
+int usb_gadget_register_driver(struct usb_gadget_driver *driver);
/**
* usb_gadget_unregister_driver - unregister a gadget driver
@@ -810,7 +796,7 @@ int usb_gadget_register_driver (struct usb_gadget_driver *driver);
* will in in exit sections, so may not be linked in some kernels.
* This function must be called in a context that can sleep.
*/
-int usb_gadget_unregister_driver (struct usb_gadget_driver *driver);
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver);
/*-------------------------------------------------------------------------*/
@@ -843,7 +829,7 @@ struct usb_gadget_strings {
};
/* put descriptor for string with that id into buf (buflen >= 256) */
-int usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf);
+int usb_gadget_get_string(struct usb_gadget_strings *table, int id, u8 *buf);
/*-------------------------------------------------------------------------*/
@@ -861,10 +847,10 @@ int usb_gadget_config_buf(const struct usb_config_descriptor *config,
/* utility wrapping a simple endpoint selection policy */
-extern struct usb_ep *usb_ep_autoconfig (struct usb_gadget *,
+extern struct usb_ep *usb_ep_autoconfig(struct usb_gadget *,
struct usb_endpoint_descriptor *);
-extern void usb_ep_autoconfig_reset (struct usb_gadget *);
+extern void usb_ep_autoconfig_reset(struct usb_gadget *);
extern int usb_gadget_handle_interrupts(void);