diff options
| -rw-r--r-- | arch/arm/mach-rmobile/Kconfig.64 | 6 | ||||
| -rw-r--r-- | board/renesas/ulcb/Kconfig | 15 | ||||
| -rw-r--r-- | board/renesas/ulcb/MAINTAINERS | 7 | ||||
| -rw-r--r-- | board/renesas/ulcb/Makefile | 9 | ||||
| -rw-r--r-- | board/renesas/ulcb/cpld.c | 167 | ||||
| -rw-r--r-- | board/renesas/ulcb/ulcb.c | 257 | ||||
| -rw-r--r-- | configs/r8a7795_ulcb_defconfig | 21 | ||||
| -rw-r--r-- | configs/r8a7796_ulcb_defconfig | 22 | ||||
| -rw-r--r-- | include/configs/ulcb.h | 110 |
9 files changed, 614 insertions, 0 deletions
diff --git a/arch/arm/mach-rmobile/Kconfig.64 b/arch/arm/mach-rmobile/Kconfig.64 index 5db93ac..c79b39d 100644 --- a/arch/arm/mach-rmobile/Kconfig.64 +++ b/arch/arm/mach-rmobile/Kconfig.64 @@ -20,11 +20,17 @@ config TARGET_SALVATOR_X help Support for Renesas R-Car Gen3 platform +config TARGET_ULCB + bool "ULCB board" + help + Support for Renesas R-Car Gen3 ULCB platform + endchoice config SYS_SOC default "rmobile" source "board/renesas/salvator-x/Kconfig" +source "board/renesas/ulcb/Kconfig" endif diff --git a/board/renesas/ulcb/Kconfig b/board/renesas/ulcb/Kconfig new file mode 100644 index 0000000..1e9a10d --- /dev/null +++ b/board/renesas/ulcb/Kconfig @@ -0,0 +1,15 @@ +if TARGET_ULCB + +config SYS_SOC + default "rmobile" + +config SYS_BOARD + default "ulcb" + +config SYS_VENDOR + default "renesas" + +config SYS_CONFIG_NAME + default "ulcb" + +endif diff --git a/board/renesas/ulcb/MAINTAINERS b/board/renesas/ulcb/MAINTAINERS new file mode 100644 index 0000000..e7cdc52 --- /dev/null +++ b/board/renesas/ulcb/MAINTAINERS @@ -0,0 +1,7 @@ +ULCB BOARD +M: Marek Vasut <marek.vasut+renesas@gmail.com> +S: Maintained +F: board/renesas/ulcb/ +F: include/configs/ulcb.h +F: configs/r8a7795_ulcb_defconfig +F: configs/r8a7796_ulcb_defconfig diff --git a/board/renesas/ulcb/Makefile b/board/renesas/ulcb/Makefile new file mode 100644 index 0000000..6fe0b48 --- /dev/null +++ b/board/renesas/ulcb/Makefile @@ -0,0 +1,9 @@ +# +# board/renesas/ulcb/Makefile +# +# Copyright (C) 2017 Renesas Electronics Corporation +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := ulcb.o cpld.o ../rcar-common/common.o diff --git a/board/renesas/ulcb/cpld.c b/board/renesas/ulcb/cpld.c new file mode 100644 index 0000000..f9384b0 --- /dev/null +++ b/board/renesas/ulcb/cpld.c @@ -0,0 +1,167 @@ +/* + * ULCB board CPLD access support + * + * Copyright (C) 2017 Renesas Electronics Corporation + * Copyright (C) 2017 Cogent Embedded, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spi.h> +#include <asm/io.h> +#include <asm/gpio.h> + +#define SCLK GPIO_GP_6_8 +#define SSTBZ GPIO_GP_2_3 +#define MOSI GPIO_GP_6_7 +#define MISO GPIO_GP_6_10 + +#define CPLD_ADDR_MODE 0x00 /* RW */ +#define CPLD_ADDR_MUX 0x02 /* RW */ +#define CPLD_ADDR_DIPSW6 0x08 /* R */ +#define CPLD_ADDR_RESET 0x80 /* RW */ +#define CPLD_ADDR_VERSION 0xFF /* R */ + +static int cpld_initialized; + +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + /* Always valid */ + return 1; +} + +void spi_cs_activate(struct spi_slave *slave) +{ + /* Always active */ +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + /* Always active */ +} + +void ulcb_softspi_sda(int set) +{ + gpio_set_value(MOSI, set); +} + +void ulcb_softspi_scl(int set) +{ + gpio_set_value(SCLK, set); +} + +unsigned char ulcb_softspi_read(void) +{ + return !!gpio_get_value(MISO); +} + +static void cpld_rw(u8 write) +{ + gpio_set_value(MOSI, write); + gpio_set_value(SSTBZ, 0); + gpio_set_value(SCLK, 1); + gpio_set_value(SCLK, 0); + gpio_set_value(SSTBZ, 1); +} + +static u32 cpld_read(u8 addr) +{ + u32 data = 0; + + spi_xfer(NULL, 8, &addr, NULL, SPI_XFER_BEGIN | SPI_XFER_END); + + cpld_rw(0); + + spi_xfer(NULL, 32, NULL, &data, SPI_XFER_BEGIN | SPI_XFER_END); + + return swab32(data); +} + +static void cpld_write(u8 addr, u32 data) +{ + data = swab32(data); + + spi_xfer(NULL, 32, &data, NULL, SPI_XFER_BEGIN | SPI_XFER_END); + + spi_xfer(NULL, 8, NULL, &addr, SPI_XFER_BEGIN | SPI_XFER_END); + + cpld_rw(1); +} + +static void cpld_init(void) +{ + if (cpld_initialized) + return; + + /* PULL-UP on MISO line */ + setbits_le32(PFC_PUEN5, PUEN_SSI_SDATA4); + + gpio_request(SCLK, NULL); + gpio_request(SSTBZ, NULL); + gpio_request(MOSI, NULL); + gpio_request(MISO, NULL); + + gpio_direction_output(SCLK, 0); + gpio_direction_output(SSTBZ, 1); + gpio_direction_output(MOSI, 0); + gpio_direction_input(MISO); + + /* Dummy read */ + cpld_read(CPLD_ADDR_VERSION); + + cpld_initialized = 1; +} + +static int do_cpld(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + u32 addr, val; + + cpld_init(); + + if (argc == 2 && strcmp(argv[1], "info") == 0) { + printf("CPLD version:\t\t\t0x%08x\n", + cpld_read(CPLD_ADDR_VERSION)); + printf("H3 Mode setting (MD0..28):\t0x%08x\n", + cpld_read(CPLD_ADDR_MODE)); + printf("Multiplexer settings:\t\t0x%08x\n", + cpld_read(CPLD_ADDR_MUX)); + printf("DIPSW (SW6):\t\t\t0x%08x\n", + cpld_read(CPLD_ADDR_DIPSW6)); + return 0; + } + + if (argc < 3) + return CMD_RET_USAGE; + + addr = simple_strtoul(argv[2], NULL, 16); + if (!(addr == CPLD_ADDR_VERSION || addr == CPLD_ADDR_MODE || + addr == CPLD_ADDR_MUX || addr == CPLD_ADDR_DIPSW6 || + addr == CPLD_ADDR_RESET)) { + printf("Invalid CPLD register address\n"); + return CMD_RET_USAGE; + } + + if (argc == 3 && strcmp(argv[1], "read") == 0) { + printf("0x%x\n", cpld_read(addr)); + } else if (argc == 4 && strcmp(argv[1], "write") == 0) { + val = simple_strtoul(argv[3], NULL, 16); + cpld_write(addr, val); + } + + return 0; +} + +U_BOOT_CMD( + cpld, 4, 1, do_cpld, + "CPLD access", + "info\n" + "cpld read addr\n" + "cpld write addr val\n" +); + +void reset_cpu(ulong addr) +{ + cpld_init(); + cpld_write(CPLD_ADDR_RESET, 1); +} diff --git a/board/renesas/ulcb/ulcb.c b/board/renesas/ulcb/ulcb.c new file mode 100644 index 0000000..4005ec8 --- /dev/null +++ b/board/renesas/ulcb/ulcb.c @@ -0,0 +1,257 @@ +/* + * board/renesas/ulcb/ulcb.c + * This file is ULCB board support. + * + * Copyright (C) 2017 Renesas Electronics Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <malloc.h> +#include <netdev.h> +#include <dm.h> +#include <dm/platform_data/serial_sh.h> +#include <asm/processor.h> +#include <asm/mach-types.h> +#include <asm/io.h> +#include <linux/errno.h> +#include <asm/arch/sys_proto.h> +#include <asm/gpio.h> +#include <asm/arch/gpio.h> +#include <asm/arch/rmobile.h> +#include <asm/arch/rcar-mstp.h> +#include <asm/arch/sh_sdhi.h> +#include <i2c.h> +#include <mmc.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define CPGWPCR 0xE6150904 +#define CPGWPR 0xE615090C + +#define CLK2MHZ(clk) (clk / 1000 / 1000) +void s_init(void) +{ + struct rcar_rwdt *rwdt = (struct rcar_rwdt *)RWDT_BASE; + struct rcar_swdt *swdt = (struct rcar_swdt *)SWDT_BASE; + + /* Watchdog init */ + writel(0xA5A5A500, &rwdt->rwtcsra); + writel(0xA5A5A500, &swdt->swtcsra); + + writel(0xA5A50000, CPGWPCR); + writel(0xFFFFFFFF, CPGWPR); +} + +#define GSX_MSTP112 BIT(12) /* 3DG */ +#define TMU0_MSTP125 BIT(25) /* secure */ +#define TMU1_MSTP124 BIT(24) /* non-secure */ +#define SCIF2_MSTP310 BIT(10) /* SCIF2 */ +#define ETHERAVB_MSTP812 BIT(12) +#define DVFS_MSTP926 BIT(26) +#define SD0_MSTP314 BIT(14) +#define SD1_MSTP313 BIT(13) +#define SD2_MSTP312 BIT(12) /* either MMC0 */ + +#define SD0CKCR 0xE6150074 +#define SD1CKCR 0xE6150078 +#define SD2CKCR 0xE6150268 +#define SD3CKCR 0xE615026C + +int board_early_init_f(void) +{ + /* TMU0,1 */ /* which use ? */ + mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125 | TMU1_MSTP124); + /* SCIF2 */ + mstp_clrbits_le32(MSTPSR3, SMSTPCR3, SCIF2_MSTP310); + /* EHTERAVB */ + mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHERAVB_MSTP812); + /* eMMC */ + mstp_clrbits_le32(MSTPSR3, SMSTPCR3, SD1_MSTP313 | SD2_MSTP312); + /* SDHI0 */ + mstp_clrbits_le32(MSTPSR3, SMSTPCR3, SD0_MSTP314); + + writel(0, SD0CKCR); + writel(0, SD1CKCR); + writel(0, SD2CKCR); + writel(0, SD3CKCR); + +#if defined(CONFIG_SYS_I2C) && defined(CONFIG_SYS_I2C_SH) + /* DVFS for reset */ + mstp_clrbits_le32(MSTPSR9, SMSTPCR9, DVFS_MSTP926); +#endif + return 0; +} + +/* SYSC */ +/* R/- 32 Power status register 2(3DG) */ +#define SYSC_PWRSR2 0xE6180100 +/* -/W 32 Power resume control register 2 (3DG) */ +#define SYSC_PWRONCR2 0xE618010C + +int board_init(void) +{ + /* adress of boot parameters */ + gd->bd->bi_boot_params = CONFIG_SYS_TEXT_BASE + 0x50000; + + /* Init PFC controller */ +#if defined(CONFIG_R8A7795) + r8a7795_pinmux_init(); +#elif defined(CONFIG_R8A7796) + r8a7796_pinmux_init(); +#endif + + /* USB1 pull-up */ + setbits_le32(PFC_PUEN6, PUEN_USB1_OVC | PUEN_USB1_PWEN); + +#ifdef CONFIG_RAVB + /* EtherAVB Enable */ + /* GPSR2 */ + gpio_request(GPIO_GFN_AVB_AVTP_CAPTURE_A, NULL); + gpio_request(GPIO_GFN_AVB_AVTP_MATCH_A, NULL); + gpio_request(GPIO_GFN_AVB_LINK, NULL); + gpio_request(GPIO_GFN_AVB_PHY_INT, NULL); + gpio_request(GPIO_GFN_AVB_MAGIC, NULL); + gpio_request(GPIO_GFN_AVB_MDC, NULL); + + /* IPSR0 */ + gpio_request(GPIO_IFN_AVB_MDC, NULL); + gpio_request(GPIO_IFN_AVB_MAGIC, NULL); + gpio_request(GPIO_IFN_AVB_PHY_INT, NULL); + gpio_request(GPIO_IFN_AVB_LINK, NULL); + gpio_request(GPIO_IFN_AVB_AVTP_MATCH_A, NULL); + gpio_request(GPIO_IFN_AVB_AVTP_CAPTURE_A, NULL); + /* IPSR1 */ + gpio_request(GPIO_FN_AVB_AVTP_PPS, NULL); + /* IPSR2 */ + gpio_request(GPIO_FN_AVB_AVTP_MATCH_B, NULL); + /* IPSR3 */ + gpio_request(GPIO_FN_AVB_AVTP_CAPTURE_B, NULL); + + /* AVB_PHY_RST */ + gpio_request(GPIO_GP_2_10, NULL); + gpio_direction_output(GPIO_GP_2_10, 0); + mdelay(20); + gpio_set_value(GPIO_GP_2_10, 1); + udelay(1); +#endif + + return 0; +} + +static struct eth_pdata salvator_x_ravb_platdata = { + .iobase = 0xE6800000, + .phy_interface = 0, + .max_speed = 1000, +}; + +U_BOOT_DEVICE(salvator_x_ravb) = { + .name = "ravb", + .platdata = &salvator_x_ravb_platdata, +}; + +#ifdef CONFIG_SH_SDHI +int board_mmc_init(bd_t *bis) +{ + int ret = -ENODEV; + + /* SDHI0 */ + gpio_request(GPIO_GFN_SD0_DAT0, NULL); + gpio_request(GPIO_GFN_SD0_DAT1, NULL); + gpio_request(GPIO_GFN_SD0_DAT2, NULL); + gpio_request(GPIO_GFN_SD0_DAT3, NULL); + gpio_request(GPIO_GFN_SD0_CLK, NULL); + gpio_request(GPIO_GFN_SD0_CMD, NULL); + gpio_request(GPIO_GFN_SD0_CD, NULL); + gpio_request(GPIO_GFN_SD0_WP, NULL); + + gpio_request(GPIO_GP_5_2, NULL); + gpio_request(GPIO_GP_5_1, NULL); + gpio_direction_output(GPIO_GP_5_2, 1); /* power on */ + gpio_direction_output(GPIO_GP_5_1, 1); /* 1: 3.3V, 0: 1.8V */ + + ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI0_BASE, 0, + SH_SDHI_QUIRK_64BIT_BUF); + if (ret) + return ret; + + /* SDHI1/SDHI2 eMMC */ + gpio_request(GPIO_GFN_SD1_DAT0, NULL); + gpio_request(GPIO_GFN_SD1_DAT1, NULL); + gpio_request(GPIO_GFN_SD1_DAT2, NULL); + gpio_request(GPIO_GFN_SD1_DAT3, NULL); + gpio_request(GPIO_GFN_SD2_DAT0, NULL); + gpio_request(GPIO_GFN_SD2_DAT1, NULL); + gpio_request(GPIO_GFN_SD2_DAT2, NULL); + gpio_request(GPIO_GFN_SD2_DAT3, NULL); + gpio_request(GPIO_GFN_SD2_CLK, NULL); +#if defined(CONFIG_R8A7795) + gpio_request(GPIO_GFN_SD2_CMD, NULL); +#elif defined(CONFIG_R8A7796) + gpio_request(GPIO_FN_SD2_CMD, NULL); +#else +#error Only R8A7795 and R87796 is supported +#endif + gpio_request(GPIO_GP_5_3, NULL); + gpio_request(GPIO_GP_5_9, NULL); + gpio_direction_output(GPIO_GP_5_3, 0); /* 1: 3.3V, 0: 1.8V */ + gpio_direction_output(GPIO_GP_5_9, 0); /* 1: 3.3V, 0: 1.8V */ + + ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI2_BASE, 1, + SH_SDHI_QUIRK_64BIT_BUF); + + return ret; +} +#endif + +int dram_init(void) +{ + gd->ram_size = PHYS_SDRAM_1_SIZE; +#if (CONFIG_NR_DRAM_BANKS >= 2) + gd->ram_size += PHYS_SDRAM_2_SIZE; +#endif +#if (CONFIG_NR_DRAM_BANKS >= 3) + gd->ram_size += PHYS_SDRAM_3_SIZE; +#endif +#if (CONFIG_NR_DRAM_BANKS >= 4) + gd->ram_size += PHYS_SDRAM_4_SIZE; +#endif + + return 0; +} + +int dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; +#if (CONFIG_NR_DRAM_BANKS >= 2) + gd->bd->bi_dram[1].start = PHYS_SDRAM_2; + gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; +#endif +#if (CONFIG_NR_DRAM_BANKS >= 3) + gd->bd->bi_dram[2].start = PHYS_SDRAM_3; + gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE; +#endif +#if (CONFIG_NR_DRAM_BANKS >= 4) + gd->bd->bi_dram[3].start = PHYS_SDRAM_4; + gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE; +#endif + return 0; +} + +const struct rmobile_sysinfo sysinfo = { + CONFIG_RCAR_BOARD_STRING +}; + +static const struct sh_serial_platdata serial_platdata = { + .base = SCIF2_BASE, + .type = PORT_SCIF, + .clk = CONFIG_SH_SCIF_CLK_FREQ, + .clk_mode = INT_CLK, +}; + +U_BOOT_DEVICE(salvator_x_scif2) = { + .name = "serial_sh", + .platdata = &serial_platdata, +}; diff --git a/configs/r8a7795_ulcb_defconfig b/configs/r8a7795_ulcb_defconfig new file mode 100644 index 0000000..fd5fd55 --- /dev/null +++ b/configs/r8a7795_ulcb_defconfig @@ -0,0 +1,21 @@ +CONFIG_ARM=y +CONFIG_ARCH_RMOBILE=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_RCAR_GEN3=y +CONFIG_TARGET_ULCB=y +CONFIG_DEFAULT_FDT_FILE="r8a7795-h3ulcb.dtb" +CONFIG_VERSION_VARIABLE=y +CONFIG_CMD_BOOTZ=y +# CONFIG_CMD_IMLS is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_SH_SDHI=y +CONFIG_DM_ETH=y +CONFIG_RENESAS_RAVB=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_OF_LIBFDT=y diff --git a/configs/r8a7796_ulcb_defconfig b/configs/r8a7796_ulcb_defconfig new file mode 100644 index 0000000..96f903b --- /dev/null +++ b/configs/r8a7796_ulcb_defconfig @@ -0,0 +1,22 @@ +CONFIG_ARM=y +CONFIG_ARCH_RMOBILE=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_RCAR_GEN3=y +CONFIG_R8A7796=y +CONFIG_TARGET_ULCB=y +CONFIG_DEFAULT_FDT_FILE="r8a7796-m3ulcb.dtb" +CONFIG_VERSION_VARIABLE=y +CONFIG_CMD_BOOTZ=y +# CONFIG_CMD_IMLS is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_SH_SDHI=y +CONFIG_DM_ETH=y +CONFIG_RENESAS_RAVB=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_OF_LIBFDT=y diff --git a/include/configs/ulcb.h b/include/configs/ulcb.h new file mode 100644 index 0000000..857fc9f --- /dev/null +++ b/include/configs/ulcb.h @@ -0,0 +1,110 @@ +/* + * include/configs/ulcb.h + * This file is ULCB board configuration. + * + * Copyright (C) 2017 Renesas Electronics Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ULCB_H +#define __ULCB_H + +#undef DEBUG + +#define CONFIG_RCAR_BOARD_STRING "ULCB" + +#include "rcar-gen3-common.h" + +/* M3 ULCB has 2 banks, each with 1 GiB of RAM */ +#if defined(CONFIG_R8A7796) +#undef PHYS_SDRAM_1_SIZE +#undef PHYS_SDRAM_2_SIZE +#define PHYS_SDRAM_1_SIZE (0x40000000u - DRAM_RSV_SIZE) +#define PHYS_SDRAM_2_SIZE 0x40000000u +#endif + +/* SCIF */ +#define CONFIG_SCIF_CONSOLE +#define CONFIG_CONS_SCIF2 +#define CONFIG_CONS_INDEX 2 +#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_S3D4_CLK_FREQ + +/* [A] Hyper Flash */ +/* use to RPC(SPI Multi I/O Bus Controller) */ + +/* Ethernet RAVB */ +#define CONFIG_NET_MULTI +#define CONFIG_PHY_MICREL +#define CONFIG_BITBANGMII +#define CONFIG_BITBANGMII_MULTI + +/* Board Clock */ +/* XTAL_CLK : 33.33MHz */ +#define RCAR_XTAL_CLK 33333333u +#define CONFIG_SYS_CLK_FREQ RCAR_XTAL_CLK +/* ch0to2 CPclk, ch3to11 S3D2_PEREclk, ch12to14 S3D2_RTclk */ +/* CPclk 16.66MHz, S3D2 133.33MHz , S3D4 66.66MHz */ +#define CONFIG_CP_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) +#define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 192 / 2) +#define CONFIG_S3D2_CLK_FREQ (266666666u/2) +#define CONFIG_S3D4_CLK_FREQ (266666666u/4) + +/* Generic Timer Definitions (use in assembler source) */ +#define COUNTER_FREQUENCY 0xFE502A /* 16.66MHz from CPclk */ + +/* Generic Interrupt Controller Definitions */ +#define CONFIG_GICV2 +#define GICD_BASE 0xF1010000 +#define GICC_BASE 0xF1020000 + +/* CPLD SPI */ +#define CONFIG_CMD_SPI +#define CONFIG_SOFT_SPI +#define SPI_DELAY udelay(0) +#define SPI_SDA(val) ulcb_softspi_sda(val) +#define SPI_SCL(val) ulcb_softspi_scl(val) +#define SPI_READ ulcb_softspi_read() +#ifndef __ASSEMBLY__ +void ulcb_softspi_sda(int); +void ulcb_softspi_scl(int); +unsigned char ulcb_softspi_read(void); +#endif + +/* i2c */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_SH +#define CONFIG_SYS_I2C_SLAVE 0x60 +#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS 1 +#define CONFIG_SYS_I2C_SH_SPEED0 400000 +#define CONFIG_SH_I2C_DATA_HIGH 4 +#define CONFIG_SH_I2C_DATA_LOW 5 +#define CONFIG_SH_I2C_CLOCK 10000000 + +#define CONFIG_SYS_I2C_POWERIC_ADDR 0x30 + +/* USB */ +#ifdef CONFIG_R8A7795 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 +#else +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#endif + +/* SDHI */ +#define CONFIG_SH_SDHI_FREQ 200000000 + +/* Environment in eMMC, at the end of 2nd "boot sector" */ +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE) +#define CONFIG_SYS_MMC_ENV_DEV 1 +#define CONFIG_SYS_MMC_ENV_PART 2 + +/* Module stop status bits */ +/* MFIS, SCIF1 */ +#define CONFIG_SMSTP2_ENA 0x00002040 +/* SCIF2 */ +#define CONFIG_SMSTP3_ENA 0x00000400 +/* INTC-AP, IRQC */ +#define CONFIG_SMSTP4_ENA 0x00000180 + +#endif /* __ULCB_H */ |