summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--README4
-rw-r--r--api/api_storage.c2
-rw-r--r--arch/arm/include/asm/arch-ls102xa/config.h2
-rw-r--r--board/mpl/pip405/README6
-rw-r--r--cmd/Makefile4
-rw-r--r--cmd/disk.c2
-rw-r--r--common/board_r.c4
-rw-r--r--disk/part.c2
-rw-r--r--drivers/block/sym53c8xx.c2
-rw-r--r--fs/fat/fat.c2
-rw-r--r--include/config_cmd_all.h2
-rw-r--r--include/config_distro_bootcmd.h6
-rw-r--r--include/config_fallbacks.h2
-rw-r--r--include/configs/MPC8544DS.h2
-rw-r--r--include/configs/MPC8572DS.h2
-rw-r--r--include/configs/MPC8610HPCD.h2
-rw-r--r--include/configs/MPC8641HPCN.h2
-rw-r--r--include/configs/PIP405.h2
-rw-r--r--include/configs/am57xx_evm.h2
-rw-r--r--include/configs/cm_t54.h2
-rw-r--r--include/configs/db-88f6820-gp.h2
-rw-r--r--include/configs/dra7xx_evm.h2
-rw-r--r--include/configs/efi-x86.h2
-rw-r--r--include/configs/galileo.h2
-rw-r--r--include/configs/highbank.h2
-rw-r--r--include/configs/ls1043aqds.h2
-rw-r--r--include/configs/ls2080aqds.h2
-rw-r--r--include/configs/ls2080ardb.h2
-rw-r--r--include/configs/omap5_uevm.h2
-rw-r--r--include/configs/qemu-x86.h2
-rw-r--r--include/configs/sunxi-common.h2
-rw-r--r--include/configs/x86-common.h2
-rw-r--r--include/configs/xilinx_zynqmp.h2
33 files changed, 40 insertions, 40 deletions
diff --git a/README b/README
index 88ff837..33dc788 100644
--- a/README
+++ b/README
@@ -1066,7 +1066,7 @@ The following options need to be configured:
CONFIG_CMD_RUN run command in env variable
CONFIG_CMD_SANDBOX * sb command to access sandbox features
CONFIG_CMD_SAVES * save S record dump
- CONFIG_CMD_SCSI * SCSI Support
+ CONFIG_SCSI * SCSI Support
CONFIG_CMD_SDRAM * print SDRAM configuration information
(requires CONFIG_CMD_I2C)
CONFIG_CMD_SETGETDCR Support for DCR Register access
@@ -1254,7 +1254,7 @@ The following options need to be configured:
CONFIG_MTD_PARTITIONS Memory Technology Device partition table.
If IDE or SCSI support is enabled (CONFIG_CMD_IDE or
- CONFIG_CMD_SCSI) you must configure support for at
+ CONFIG_SCSI) you must configure support for at
least one non-MTD partition type as well.
- IDE Reset method:
diff --git a/api/api_storage.c b/api/api_storage.c
index 8c30c56..d425a9a 100644
--- a/api/api_storage.c
+++ b/api/api_storage.c
@@ -67,7 +67,7 @@ void dev_stor_init(void)
specs[ENUM_SATA].type = DEV_TYP_STOR | DT_STOR_SATA;
specs[ENUM_SATA].name = "sata";
#endif
-#if defined(CONFIG_CMD_SCSI)
+#if defined(CONFIG_SCSI)
specs[ENUM_SCSI].max_dev = CONFIG_SYS_SCSI_MAX_DEVICE;
specs[ENUM_SCSI].enum_started = 0;
specs[ENUM_SCSI].enum_ended = 0;
diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
index 267bd17..d77c04a 100644
--- a/arch/arm/include/asm/arch-ls102xa/config.h
+++ b/arch/arm/include/asm/arch-ls102xa/config.h
@@ -82,7 +82,7 @@
/* SATA */
#define AHCI_BASE_ADDR (CONFIG_SYS_IMMR + 0x02200000)
#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
diff --git a/board/mpl/pip405/README b/board/mpl/pip405/README
index e900c56..f039817 100644
--- a/board/mpl/pip405/README
+++ b/board/mpl/pip405/README
@@ -32,8 +32,8 @@ Changed files:
- include/cmd_bsp.h added PIP405 commands definitions
- include/cmd_condefs.h added Floppy and SCSI support
- include/cmd_disk.h changed to work with block device description
-- include/config_LANTEC.h excluded CONFIG_CMD_FDC and CONFIG_CMD_SCSI
-- include/config_hymod.h excluded CONFIG_CMD_FDC and CONFIG_CMD_SCSI
+- include/config_LANTEC.h excluded CONFIG_CMD_FDC and CONFIG_SCSI
+- include/config_hymod.h excluded CONFIG_CMD_FDC and CONFIG_SCSI
- include/flash.h added INTEL_ID_28F320C3T 0x88C488C4
- include/i2c.h added "defined(CONFIG_PIP405)"
- include/image.h added IH_OS_U_BOOT, IH_TYPE_FIRMWARE
@@ -86,7 +86,7 @@ section "Changes".
New Commands:
-------------
-CONFIG_CMD_SCSI SCSI Support
+CONFIG_SCSI SCSI Support
CONFIG_CMF_FDC Floppy disk support
IDE additions:
diff --git a/cmd/Makefile b/cmd/Makefile
index f95759e..6612a3b 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -112,7 +112,7 @@ obj-$(CONFIG_CMD_REMOTEPROC) += remoteproc.o
obj-$(CONFIG_SANDBOX) += host.o
obj-$(CONFIG_CMD_SATA) += sata.o
obj-$(CONFIG_CMD_SF) += sf.o
-obj-$(CONFIG_CMD_SCSI) += scsi.o
+obj-$(CONFIG_SCSI) += scsi.o
obj-$(CONFIG_CMD_SHA1SUM) += sha1sum.o
obj-$(CONFIG_CMD_SETEXPR) += setexpr.o
obj-$(CONFIG_CMD_SOFTSWITCH) += softswitch.o
@@ -157,7 +157,7 @@ endif # !CONFIG_SPL_BUILD
ifdef CONFIG_SPL_BUILD
ifdef CONFIG_SPL_SATA_SUPPORT
-obj-$(CONFIG_CMD_SCSI) += scsi.o
+obj-$(CONFIG_SCSI) += scsi.o
endif
endif # CONFIG_SPL_BUILD
diff --git a/cmd/disk.c b/cmd/disk.c
index 2fd1717..fcc4123 100644
--- a/cmd/disk.c
+++ b/cmd/disk.c
@@ -8,7 +8,7 @@
#include <command.h>
#include <part.h>
-#if defined(CONFIG_CMD_IDE) || defined(CONFIG_CMD_SCSI) || \
+#if defined(CONFIG_CMD_IDE) || defined(CONFIG_SCSI) || \
defined(CONFIG_USB_STORAGE)
int common_diskboot(cmd_tbl_t *cmdtp, const char *intf, int argc,
char *const argv[])
diff --git a/common/board_r.c b/common/board_r.c
index ad02549..d959ad3 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -620,7 +620,7 @@ static int initr_ambapp_print(void)
}
#endif
-#if defined(CONFIG_CMD_SCSI)
+#if defined(CONFIG_SCSI)
static int initr_scsi(void)
{
puts("SCSI: ");
@@ -923,7 +923,7 @@ init_fnc_t init_sequence_r[] = {
initr_ambapp_print,
#endif
#endif
-#ifdef CONFIG_CMD_SCSI
+#ifdef CONFIG_SCSI
INIT_FUNC_WATCHDOG_RESET
initr_scsi,
#endif
diff --git a/disk/part.c b/disk/part.c
index 543cab8..2613bff 100644
--- a/disk/part.c
+++ b/disk/part.c
@@ -28,7 +28,7 @@ const struct block_drvr block_drvr[] = {
#if defined(CONFIG_CMD_SATA)
{.name = "sata", .get_dev = sata_get_dev, },
#endif
-#if defined(CONFIG_CMD_SCSI)
+#if defined(CONFIG_SCSI)
{ .name = "scsi", .get_dev = scsi_get_dev, },
#endif
#if defined(CONFIG_CMD_USB) && defined(CONFIG_USB_STORAGE)
diff --git a/drivers/block/sym53c8xx.c b/drivers/block/sym53c8xx.c
index c7c40af..5daede7 100644
--- a/drivers/block/sym53c8xx.c
+++ b/drivers/block/sym53c8xx.c
@@ -33,7 +33,7 @@
#define PRINTF(fmt,args...)
#endif
-#if defined(CONFIG_CMD_SCSI) && defined(CONFIG_SCSI_SYM53C8XX)
+#if defined(CONFIG_SCSI) && defined(CONFIG_SCSI_SYM53C8XX)
#undef SCSI_SINGLE_STEP
/*
diff --git a/fs/fat/fat.c b/fs/fat/fat.c
index 600a90e..826bd85 100644
--- a/fs/fat/fat.c
+++ b/fs/fat/fat.c
@@ -1254,7 +1254,7 @@ int file_fat_detectfs(void)
#if defined(CONFIG_CMD_IDE) || \
defined(CONFIG_CMD_SATA) || \
- defined(CONFIG_CMD_SCSI) || \
+ defined(CONFIG_SCSI) || \
defined(CONFIG_CMD_USB) || \
defined(CONFIG_MMC)
printf("Interface: ");
diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h
index ed502a1..b5fd6c6 100644
--- a/include/config_cmd_all.h
+++ b/include/config_cmd_all.h
@@ -45,7 +45,7 @@
#define CONFIG_CMD_READ /* Read data from partition */
#define CONFIG_CMD_SANDBOX /* sb command to access sandbox features */
#define CONFIG_CMD_SAVES /* save S record dump */
-#define CONFIG_CMD_SCSI /* SCSI Support */
+#define CONFIG_SCSI /* SCSI Support */
#define CONFIG_CMD_SDRAM /* SDRAM DIMM SPD info printout */
#define CONFIG_CMD_TERMINAL /* built-in Serial Terminal */
#define CONFIG_CMD_UBI /* UBI Support */
diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h
index 7f67344..5a8d7f2 100644
--- a/include/config_distro_bootcmd.h
+++ b/include/config_distro_bootcmd.h
@@ -165,7 +165,7 @@
BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_CMD_SATA
#endif
-#ifdef CONFIG_CMD_SCSI
+#ifdef CONFIG_SCSI
#define BOOTENV_RUN_SCSI_INIT "run scsi_init; "
#define BOOTENV_SET_SCSI_NEED_INIT "setenv scsi_need_init; "
#define BOOTENV_SHARED_SCSI \
@@ -185,9 +185,9 @@
#define BOOTENV_SET_SCSI_NEED_INIT
#define BOOTENV_SHARED_SCSI
#define BOOTENV_DEV_SCSI \
- BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_CMD_SCSI
+ BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_SCSI
#define BOOTENV_DEV_NAME_SCSI \
- BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_CMD_SCSI
+ BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_SCSI
#endif
#ifdef CONFIG_CMD_IDE
diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h
index 2666191..2ad54b7 100644
--- a/include/config_fallbacks.h
+++ b/include/config_fallbacks.h
@@ -45,7 +45,7 @@
/* Rather than repeat this expression each time, add a define for it */
#if defined(CONFIG_CMD_IDE) || \
defined(CONFIG_CMD_SATA) || \
- defined(CONFIG_CMD_SCSI) || \
+ defined(CONFIG_SCSI) || \
defined(CONFIG_CMD_USB) || \
defined(CONFIG_CMD_PART) || \
defined(CONFIG_CMD_GPT) || \
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index 26d92da..f3036c1 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -373,7 +373,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI
- #define CONFIG_CMD_SCSI
+ #define CONFIG_SCSI
#endif
/*
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 8c4e5e2..bb7f38e 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -576,7 +576,7 @@
#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
#endif
/*
diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
index e7f01d0..f6d45a9 100644
--- a/include/configs/MPC8610HPCD.h
+++ b/include/configs/MPC8610HPCD.h
@@ -449,7 +449,7 @@
#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
#endif
#define CONFIG_WATCHDOG /* watchdog enabled */
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 5e23007..9b2623c 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -610,7 +610,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI
- #define CONFIG_CMD_SCSI
+ #define CONFIG_SCSI
#endif
#undef CONFIG_WATCHDOG /* watchdog disabled */
diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index 4bd06a4..4506d86 100644
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -43,7 +43,7 @@
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_FDC
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
#define CONFIG_CMD_DATE
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_SAVES
diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h
index 32d7d4d..d53b0fd 100644
--- a/include/configs/am57xx_evm.h
+++ b/include/configs/am57xx_evm.h
@@ -75,7 +75,7 @@
/* SATA */
#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h
index 9b13aa6..ac6103c 100644
--- a/include/configs/cm_t54.h
+++ b/include/configs/cm_t54.h
@@ -60,7 +60,7 @@
#define CONFIG_SPL_SATA_BOOT_DEVICE 0
#define CONFIG_SYS_SATA_FAT_BOOT_PARTITION 1
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h
index d84dde3..3539a62 100644
--- a/include/configs/db-88f6820-gp.h
+++ b/include/configs/db-88f6820-gp.h
@@ -27,7 +27,7 @@
#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
#define CONFIG_CMD_ENV
#define CONFIG_CMD_PCI
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
/* I2C */
#define CONFIG_SYS_I2C
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 79b6c09..8a0cd66 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -230,7 +230,7 @@
/* SATA */
#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
diff --git a/include/configs/efi-x86.h b/include/configs/efi-x86.h
index 6dd0b32..95e46c5 100644
--- a/include/configs/efi-x86.h
+++ b/include/configs/efi-x86.h
@@ -18,7 +18,7 @@
#undef CONFIG_VIDEO
#undef CONFIG_CFB_CONSOLE
#undef CONFIG_SCSI_AHCI
-#undef CONFIG_CMD_SCSI
+#undef CONFIG_SCSI
#undef CONFIG_INTEL_ICH6_GPIO
#undef CONFIG_USB_EHCI_PCI
diff --git a/include/configs/galileo.h b/include/configs/galileo.h
index 2f1f6d4..40f7fba 100644
--- a/include/configs/galileo.h
+++ b/include/configs/galileo.h
@@ -29,7 +29,7 @@
/* SATA is not supported in Quark SoC */
#undef CONFIG_SCSI_AHCI
-#undef CONFIG_CMD_SCSI
+#undef CONFIG_SCSI
/* Video is not supported in Quark SoC */
#undef CONFIG_VIDEO
diff --git a/include/configs/highbank.h b/include/configs/highbank.h
index 3bce12b..5cefddc 100644
--- a/include/configs/highbank.h
+++ b/include/configs/highbank.h
@@ -51,7 +51,7 @@
/*
* Command line configuration.
*/
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
#define CONFIG_BOOT_RETRY_TIME -1
#define CONFIG_RESET_TO_RETRY
diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h
index d71a229..af1f73d 100644
--- a/include/configs/ls1043aqds.h
+++ b/include/configs/ls1043aqds.h
@@ -108,7 +108,7 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
#define CONFIG_DOS_PARTITION
#define CONFIG_BOARD_LATE_INIT
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index 2d7567f..f8c9e51 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -44,7 +44,7 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
#define CONFIG_DOS_PARTITION
#define CONFIG_BOARD_LATE_INIT
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 5bec509..4577919 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -62,7 +62,7 @@ unsigned long get_board_sys_clk(void);
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
#define CONFIG_DOS_PARTITION
#define CONFIG_BOARD_LATE_INIT
diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index 86cefa3..4ddc492 100644
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -115,7 +115,7 @@
/* Max time to hold reset on this board, see doc/README.omap-reset-time */
#define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC 16296
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
diff --git a/include/configs/qemu-x86.h b/include/configs/qemu-x86.h
index b0d2ffe..476d37d 100644
--- a/include/configs/qemu-x86.h
+++ b/include/configs/qemu-x86.h
@@ -43,7 +43,7 @@
#define CONFIG_ATAPI
#undef CONFIG_SCSI_AHCI
-#undef CONFIG_CMD_SCSI
+#undef CONFIG_SCSI
#else
#define CONFIG_SCSI_DEV_LIST \
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_AHCI}
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 2406115..ac2d931 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -125,7 +125,7 @@
#define CONFIG_SYS_SCSI_MAX_LUN 1
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
CONFIG_SYS_SCSI_MAX_LUN)
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
#endif
#define CONFIG_SETUP_MEMORY_TAGS
diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h
index a2822e0..b79f47b 100644
--- a/include/configs/x86-common.h
+++ b/include/configs/x86-common.h
@@ -100,7 +100,7 @@
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_PCI
#define CONFIG_CMD_GETTIME
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
#define CONFIG_CMD_ZBOOT
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 060bca9..6b8e3ea 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -201,7 +201,7 @@
#define CONFIG_SYS_SCSI_MAX_LUN 1
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
CONFIG_SYS_SCSI_MAX_LUN)
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
#endif
#define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024)