summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--board/jupiter/jupiter.c4
-rw-r--r--board/kup/common/pcmcia.c2
-rw-r--r--board/lwmon/lwmon.c2
-rw-r--r--board/lwmon/pcmcia.c2
-rw-r--r--board/mcc200/auto_update.c2
-rw-r--r--board/mcc200/mcc200.c4
-rw-r--r--board/netta/pcmcia.c2
-rw-r--r--board/pcippc2/pcippc2.c2
-rw-r--r--board/pm520/pm520.c4
-rw-r--r--board/r360mpi/pcmcia.c2
-rw-r--r--board/sacsng/sacsng.c2
-rw-r--r--board/siemens/pcu_e/pcu_e.c2
-rw-r--r--board/sixnet/sixnet.c2
-rw-r--r--board/ssv/adnpesc1/adnpesc1.c2
-rw-r--r--board/ssv/common/cmd_sled.c2
-rw-r--r--board/ssv/common/wd_pio.c2
-rw-r--r--board/total5200/total5200.c4
-rw-r--r--board/tqm5200/cmd_stk52xx.c2
-rw-r--r--board/tqm5200/cmd_tb5200.c2
-rw-r--r--board/tqm5200/tqm5200.c4
-rw-r--r--board/tqm8272/tqm8272.c2
-rw-r--r--board/trab/auto_update.c2
-rw-r--r--board/trab/cmd_trab.c2
-rw-r--r--board/trab/trab_fkt.c20
-rw-r--r--board/uc100/pcmcia.c2
-rw-r--r--board/v38b/v38b.c4
-rw-r--r--board/xilinx/ml300/serial.c2
27 files changed, 42 insertions, 42 deletions
diff --git a/board/jupiter/jupiter.c b/board/jupiter/jupiter.c
index 04fda4a..b227487 100644
--- a/board/jupiter/jupiter.c
+++ b/board/jupiter/jupiter.c
@@ -281,7 +281,7 @@ void pci_init_board(void)
}
#endif
-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
void init_ide_reset (void)
{
@@ -306,7 +306,7 @@ void ide_set_reset (int idereset)
*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
}
}
-#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+#endif
#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
void
diff --git a/board/kup/common/pcmcia.c b/board/kup/common/pcmcia.c
index b00f794..def38f1 100644
--- a/board/kup/common/pcmcia.c
+++ b/board/kup/common/pcmcia.c
@@ -144,7 +144,7 @@ int pcmcia_hardware_disable(int slot)
return (0);
}
-#endif /* CFG_CMD_PCMCIA */
+#endif
int pcmcia_voltage_set(int slot, int vcc, int vpp)
diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c
index bb0ab55..c68978a 100644
--- a/board/lwmon/lwmon.c
+++ b/board/lwmon/lwmon.c
@@ -960,7 +960,7 @@ U_BOOT_CMD(
"lsb - print current setting\n"
);
-#endif /* CFG_CMD_BSP */
+#endif
/*----------------------------- Utilities -----------------------------*/
/***********************************************************************
diff --git a/board/lwmon/pcmcia.c b/board/lwmon/pcmcia.c
index fbab904..ebca7a2 100644
--- a/board/lwmon/pcmcia.c
+++ b/board/lwmon/pcmcia.c
@@ -166,7 +166,7 @@ int pcmcia_hardware_disable(int slot)
return (0);
}
-#endif /* CFG_CMD_PCMCIA */
+#endif
int pcmcia_voltage_set(int slot, int vcc, int vpp)
diff --git a/board/mcc200/auto_update.c b/board/mcc200/auto_update.c
index 1df6317..6044565 100644
--- a/board/mcc200/auto_update.c
+++ b/board/mcc200/auto_update.c
@@ -45,7 +45,7 @@
#endif
#if !defined(CONFIG_CMD_FAT)
-#error "must define CFG_CMD_FAT"
+#error "must define CONFIG_CMD_FAT"
#endif
#undef AU_DEBUG
diff --git a/board/mcc200/mcc200.c b/board/mcc200/mcc200.c
index 573db02..a4c4644 100644
--- a/board/mcc200/mcc200.c
+++ b/board/mcc200/mcc200.c
@@ -307,7 +307,7 @@ void pci_init_board(void)
}
#endif
-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
void init_ide_reset (void)
{
@@ -320,7 +320,7 @@ void ide_set_reset (int idereset)
debug ("ide_reset(%d)\n", idereset);
}
-#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+#endif
#if defined(CONFIG_CMD_DOC)
extern void doc_probe (ulong physadr);
diff --git a/board/netta/pcmcia.c b/board/netta/pcmcia.c
index 693e077..86b3cfb 100644
--- a/board/netta/pcmcia.c
+++ b/board/netta/pcmcia.c
@@ -291,7 +291,7 @@ int pcmcia_hardware_disable(int slot)
return (0);
}
-#endif /* CFG_CMD_PCMCIA */
+#endif
int pcmcia_voltage_set(int slot, int vcc, int vpp)
diff --git a/board/pcippc2/pcippc2.c b/board/pcippc2/pcippc2.c
index 6a37e2f..1148c6a 100644
--- a/board/pcippc2/pcippc2.c
+++ b/board/pcippc2/pcippc2.c
@@ -241,5 +241,5 @@ U_BOOT_CMD(
"wd - print current status\n"
);
-#endif /* CFG_CMD_BSP */
+#endif
#endif /* CONFIG_WATCHDOG */
diff --git a/board/pm520/pm520.c b/board/pm520/pm520.c
index 1714e35..14c3f1d 100644
--- a/board/pm520/pm520.c
+++ b/board/pm520/pm520.c
@@ -299,7 +299,7 @@ void pci_init_board(void)
}
#endif
-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
void init_ide_reset (void)
{
@@ -312,7 +312,7 @@ void ide_set_reset (int idereset)
debug ("ide_reset(%d)\n", idereset);
}
-#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+#endif
#if defined(CONFIG_CMD_DOC)
extern void doc_probe (ulong physadr);
diff --git a/board/r360mpi/pcmcia.c b/board/r360mpi/pcmcia.c
index c5e3990..a83ca8d 100644
--- a/board/r360mpi/pcmcia.c
+++ b/board/r360mpi/pcmcia.c
@@ -150,7 +150,7 @@ int pcmcia_hardware_disable(int slot)
return (0);
}
-#endif /* CFG_CMD_PCMCIA */
+#endif
int pcmcia_voltage_set(int slot, int vcc, int vpp)
diff --git a/board/sacsng/sacsng.c b/board/sacsng/sacsng.c
index 208f21e..25209e0 100644
--- a/board/sacsng/sacsng.c
+++ b/board/sacsng/sacsng.c
@@ -873,7 +873,7 @@ spi_chipsel_type spi_chipsel[] = {
};
int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]);
-#endif /* CFG_CMD_SPI */
+#endif
#endif /* CONFIG_MISC_INIT_R */
diff --git a/board/siemens/pcu_e/pcu_e.c b/board/siemens/pcu_e/pcu_e.c
index 6c37445..2309069 100644
--- a/board/siemens/pcu_e/pcu_e.c
+++ b/board/siemens/pcu_e/pcu_e.c
@@ -408,7 +408,7 @@ U_BOOT_CMD (puma, 4, 1, do_puma,
"status - print PUMA status\n"
"puma load addr len - load PUMA configuration data\n");
-#endif /* CFG_CMD_BSP */
+#endif
/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
diff --git a/board/sixnet/sixnet.c b/board/sixnet/sixnet.c
index 41c74f6..798e185 100644
--- a/board/sixnet/sixnet.c
+++ b/board/sixnet/sixnet.c
@@ -77,7 +77,7 @@ int checkboard (void)
#if defined(CONFIG_CMD_PCMCIA)
#error "SXNI855T has no PCMCIA port"
-#endif /* CFG_CMD_PCMCIA */
+#endif
/* ------------------------------------------------------------------------- */
diff --git a/board/ssv/adnpesc1/adnpesc1.c b/board/ssv/adnpesc1/adnpesc1.c
index 8edbd70..2ec3a72 100644
--- a/board/ssv/adnpesc1/adnpesc1.c
+++ b/board/ssv/adnpesc1/adnpesc1.c
@@ -89,7 +89,7 @@ spi_chipsel_type spi_chipsel[] = {
};
int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]);
-#endif /* CFG_CMD_SPI */
+#endif
#if defined(CONFIG_POST)
/*
diff --git a/board/ssv/common/cmd_sled.c b/board/ssv/common/cmd_sled.c
index 8cdf45a..713ed65 100644
--- a/board/ssv/common/cmd_sled.c
+++ b/board/ssv/common/cmd_sled.c
@@ -158,5 +158,5 @@ int do_sled (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (sled, 3, 0, do_sled,
"sled - check and set status led\n",
"sled [name [state]]\n" __NAME_STR " - state: on|off|blink\n");
-#endif /* CFG_CMD_BSP */
+#endif
#endif /* CONFIG_STATUS_LED */
diff --git a/board/ssv/common/wd_pio.c b/board/ssv/common/wd_pio.c
index 69e9ed7..9945c59 100644
--- a/board/ssv/common/wd_pio.c
+++ b/board/ssv/common/wd_pio.c
@@ -156,5 +156,5 @@ U_BOOT_CMD(
"wd off - switch watchdog off\n"
"wd - print current status\n"
);
-#endif /* CFG_CMD_BSP */
+#endif
#endif /* CONFIG_HW_WATCHDOG */
diff --git a/board/total5200/total5200.c b/board/total5200/total5200.c
index 1a35187..f32dadf 100644
--- a/board/total5200/total5200.c
+++ b/board/total5200/total5200.c
@@ -109,7 +109,7 @@ void pci_init_board(void)
}
#endif
-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
/* IRDA_1 aka PSC6_3 (pin C13) */
#define GPIO_IRDA_1 0x20000000UL
@@ -133,7 +133,7 @@ void ide_set_reset (int idereset)
*(vu_long *) MPC5XXX_GPIO_DATA_O |= GPIO_IRDA_1;
}
}
-#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+#endif
#ifdef CONFIG_VIDEO_SED13806
#include <sed13806.h>
diff --git a/board/tqm5200/cmd_stk52xx.c b/board/tqm5200/cmd_stk52xx.c
index 802332f..b746679 100644
--- a/board/tqm5200/cmd_stk52xx.c
+++ b/board/tqm5200/cmd_stk52xx.c
@@ -1241,4 +1241,4 @@ U_BOOT_CMD(
" - loopback plug(s) for X21/X22 required\n"
);
#endif
-#endif /* CFG_CMD_BSP */
+#endif
diff --git a/board/tqm5200/cmd_tb5200.c b/board/tqm5200/cmd_tb5200.c
index cd141c1..214dca6 100644
--- a/board/tqm5200/cmd_tb5200.c
+++ b/board/tqm5200/cmd_tb5200.c
@@ -101,4 +101,4 @@ U_BOOT_CMD(
);
#endif /* CONFIG_STK52XX */
-#endif /* CFG_CMD_BSP */
+#endif
diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c
index cf97603..51f4aeb 100644
--- a/board/tqm5200/tqm5200.c
+++ b/board/tqm5200/tqm5200.c
@@ -336,7 +336,7 @@ void pci_init_board(void)
}
#endif
-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
#if defined (CONFIG_MINIFAP)
#define SM501_POWER_MODE0_GATE 0x00000040UL
@@ -389,7 +389,7 @@ void ide_set_reset (int idereset)
}
#endif
}
-#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+#endif
#ifdef CONFIG_POST
/*
diff --git a/board/tqm8272/tqm8272.c b/board/tqm8272/tqm8272.c
index 653b7a9..7bd6401 100644
--- a/board/tqm8272/tqm8272.c
+++ b/board/tqm8272/tqm8272.c
@@ -1212,7 +1212,7 @@ int board_nand_init(struct nand_chip *nand)
return 0;
}
-#endif /* CFG_CMD_NAND */
+#endif
#ifdef CONFIG_PCI
struct pci_controller hose;
diff --git a/board/trab/auto_update.c b/board/trab/auto_update.c
index ad88867..ef40c54 100644
--- a/board/trab/auto_update.c
+++ b/board/trab/auto_update.c
@@ -47,7 +47,7 @@
#endif
#if !defined(CONFIG_CMD_FAT)
-#error "must define CFG_CMD_FAT"
+#error "must define CONFIG_CMD_FAT"
#endif
/*
diff --git a/board/trab/cmd_trab.c b/board/trab/cmd_trab.c
index 2db6a34..daa6aee 100644
--- a/board/trab/cmd_trab.c
+++ b/board/trab/cmd_trab.c
@@ -893,4 +893,4 @@ U_BOOT_CMD(
" For each measurment a timestamp is printeted\n"
);
-#endif /* CFG_CMD_BSP */
+#endif
diff --git a/board/trab/trab_fkt.c b/board/trab/trab_fkt.c
index 56a80ff..7273ef9 100644
--- a/board/trab/trab_fkt.c
+++ b/board/trab/trab_fkt.c
@@ -155,7 +155,7 @@ int i2c_write_multiple (uchar chip, uint addr, int alen, uchar *buffer,
int len);
int i2c_read_multiple ( uchar chip, uint addr, int alen, uchar *buffer,
int len);
-#endif /* CFG_CMD_I2C */
+#endif
/*
* TRAB board specific commands. Especially commands for burn-in and function
@@ -1019,10 +1019,10 @@ static int touch_write_clibration_values (int calib_point, int x, int y)
}
return 1;
#else
- printf ("No I2C support enabled (CFG_CMD_I2C), could not write "
+ printf ("No I2C support enabled (CONFIG_CMD_I2C), could not write "
"to EEPROM\n");
return (1);
-#endif /* CFG_CMD_I2C */
+#endif
}
@@ -1130,10 +1130,10 @@ int do_serial_number (char **argv)
printf ("%s: unknown command %s\n", __FUNCTION__, argv[2]);
return (1); /* unknown command, return error */
#else
- printf ("No I2C support enabled (CFG_CMD_I2C), could not write "
+ printf ("No I2C support enabled (CONFIG_CMD_I2C), could not write "
"to EEPROM\n");
return (1);
-#endif /* CFG_CMD_I2C */
+#endif
}
@@ -1160,10 +1160,10 @@ int do_crc16 (void)
}
return (0);
#else
- printf ("No I2C support enabled (CFG_CMD_I2C), could not write "
+ printf ("No I2C support enabled (CONFIG_CMD_I2C), could not write "
"to EEPROM\n");
return (1);
-#endif /* CFG_CMD_I2C */
+#endif
}
@@ -1272,10 +1272,10 @@ int do_eeprom (char **argv)
printf ("%s: invalid parameter %s\n", __FUNCTION__, argv[2]);
return (1);
#else
- printf ("No I2C support enabled (CFG_CMD_I2C), could not write "
+ printf ("No I2C support enabled (CONFIG_CMD_I2C), could not write "
"to EEPROM\n");
return (1);
-#endif /* CFG_CMD_I2C */
+#endif
}
#if defined(CONFIG_CMD_I2C)
@@ -1408,4 +1408,4 @@ int i2c_read_multiple ( uchar chip, uint addr, int alen,
}
return (0);
}
-#endif /* CFG_CMD_I2C */
+#endif
diff --git a/board/uc100/pcmcia.c b/board/uc100/pcmcia.c
index 74d29b9..407bdb7 100644
--- a/board/uc100/pcmcia.c
+++ b/board/uc100/pcmcia.c
@@ -149,7 +149,7 @@ int pcmcia_hardware_disable(int slot)
return (0);
}
-#endif /* CFG_CMD_PCMCIA */
+#endif
int pcmcia_voltage_set(int slot, int vcc, int vpp)
diff --git a/board/v38b/v38b.c b/board/v38b/v38b.c
index ace4aa2..ec032ee 100644
--- a/board/v38b/v38b.c
+++ b/board/v38b/v38b.c
@@ -224,7 +224,7 @@ int board_early_init_r(void)
}
-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
void init_ide_reset(void)
{
debug("init_ide_reset\n");
@@ -248,7 +248,7 @@ void ide_set_reset(int idereset)
} else
*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
}
-#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+#endif
#ifdef CONFIG_HW_WATCHDOG
diff --git a/board/xilinx/ml300/serial.c b/board/xilinx/ml300/serial.c
index 09a3dc3..ba41f85 100644
--- a/board/xilinx/ml300/serial.c
+++ b/board/xilinx/ml300/serial.c
@@ -151,4 +151,4 @@ kgdb_interruptible(int yes)
{
return;
}
-#endif /* CFG_CMD_KGDB */
+#endif