summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--board/bf537-stamp/bf537-stamp.c16
-rw-r--r--cpu/mpc8260/Makefile8
-rw-r--r--cpu/mpc8260/cpu.c3
-rw-r--r--cpu/mpc8260/ether_scc.c50
-rw-r--r--cpu/sh4/cpu.c8
-rw-r--r--drivers/net/Makefile4
-rw-r--r--drivers/net/macb.c31
-rw-r--r--drivers/net/sh_eth.c355
-rw-r--r--drivers/net/sh_eth.h10
-rw-r--r--drivers/net/smc911x.c79
-rw-r--r--drivers/net/tsec.c4
-rw-r--r--drivers/qe/uec_phy.c59
-rw-r--r--include/configs/sh7763rdp.h1
-rw-r--r--include/net.h16
-rw-r--r--include/netdev.h2
-rw-r--r--net/net.c2
16 files changed, 446 insertions, 202 deletions
diff --git a/board/bf537-stamp/bf537-stamp.c b/board/bf537-stamp/bf537-stamp.c
index 63992f6..5b619be 100644
--- a/board/bf537-stamp/bf537-stamp.c
+++ b/board/bf537-stamp/bf537-stamp.c
@@ -34,22 +34,6 @@
#include <asm/mach-common/bits/bootrom.h>
#include <netdev.h>
-/**
- * is_valid_ether_addr - Determine if the given Ethernet address is valid
- * @addr: Pointer to a six-byte array containing the Ethernet address
- *
- * Check that the Ethernet address (MAC) is not 00:00:00:00:00:00, is not
- * a multicast address, and is not FF:FF:FF:FF:FF:FF.
- *
- * Return true if the address is valid.
- */
-static inline int is_valid_ether_addr(const u8 * addr)
-{
- /* FF:FF:FF:FF:FF:FF is a multicast address so we don't need to
- * explicitly check for it here. */
- return !is_multicast_ether_addr(addr) && !is_zero_ether_addr(addr);
-}
-
DECLARE_GLOBAL_DATA_PTR;
#define POST_WORD_ADDR 0xFF903FFC
diff --git a/cpu/mpc8260/Makefile b/cpu/mpc8260/Makefile
index 80d7852..9f0c2dd 100644
--- a/cpu/mpc8260/Makefile
+++ b/cpu/mpc8260/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2006
+# (C) Copyright 2000-2008
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -27,9 +27,13 @@ LIB = $(obj)lib$(CPU).a
START = start.o kgdb.o
COBJS = traps.o serial_smc.o serial_scc.o cpu.o cpu_init.o speed.o \
- interrupts.o ether_scc.o ether_fcc.o i2c.o commproc.o \
+ interrupts.o ether_fcc.o i2c.o commproc.o \
bedbug_603e.o pci.o spi.o
+COBJS-$(CONFIG_ETHER_ON_SCC) = ether_scc.o
+
+COBJS += $(COBJS-y)
+
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
START := $(addprefix $(obj),$(START))
diff --git a/cpu/mpc8260/cpu.c b/cpu/mpc8260/cpu.c
index b9e748a..f4beca5 100644
--- a/cpu/mpc8260/cpu.c
+++ b/cpu/mpc8260/cpu.c
@@ -326,5 +326,8 @@ int cpu_eth_init(bd_t *bis)
#if defined(CONFIG_ETHER_ON_FCC)
fec_initialize(bis);
#endif
+#if defined(CONFIG_ETHER_ON_SCC)
+ mpc82xx_scc_enet_initialize(bd);
+#endif
return 0;
}
diff --git a/cpu/mpc8260/ether_scc.c b/cpu/mpc8260/ether_scc.c
index c65f0e0..3671ef1 100644
--- a/cpu/mpc8260/ether_scc.c
+++ b/cpu/mpc8260/ether_scc.c
@@ -10,6 +10,12 @@
* Advent Networks, Inc. <http://www.adventnetworks.com>
* Jay Monkman <jtm@smoothsmoothie.com>
*
+ * Modified so that it plays nicely when more than one ETHERNET interface
+ * is in use a la ether_fcc.c.
+ * (C) Copyright 2008
+ * DENX Software Engineerin GmbH
+ * Gary Jennejohn <garyj@denx.de>
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -32,11 +38,14 @@
#include <common.h>
#include <asm/cpm_8260.h>
#include <mpc8260.h>
+#include <malloc.h>
#include <net.h>
#include <command.h>
#include <config.h>
-#if defined(CONFIG_ETHER_ON_SCC) && defined(CONFIG_CMD_NET)
+#ifndef CONFIG_NET_MULTI
+#error "CONFIG_NET_MULTI must be defined."
+#endif
#if (CONFIG_ETHER_INDEX == 1)
# define PROFF_ENET PROFF_SCC1
@@ -100,7 +109,7 @@ typedef volatile struct CommonBufferDescriptor {
static RTXBD *rtx;
-int eth_send(volatile void *packet, int length)
+static int sec_send(struct eth_device *dev, volatile void *packet, int length)
{
int i;
int result = 0;
@@ -137,7 +146,7 @@ int eth_send(volatile void *packet, int length)
}
-int eth_rx(void)
+static int sec_rx(struct eth_device *dev)
{
int length;
@@ -184,7 +193,7 @@ int eth_rx(void)
*
*************************************************************/
-int eth_init(bd_t *bis)
+static int sec_init(struct eth_device *dev, bd_t *bis)
{
int i;
volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
@@ -194,9 +203,14 @@ int eth_init(bd_t *bis)
rxIdx = 0;
txIdx = 0;
- /* assign static pointer to BD area */
- dpaddr = m8260_cpm_dpalloc(sizeof(RTXBD) + 2, 16);
- rtx = (RTXBD *)&immr->im_dprambase[dpaddr];
+ /*
+ * Assign static pointer to BD area.
+ * Avoid exhausting DPRAM, which would cause a panic.
+ */
+ if (rtx == NULL) {
+ dpaddr = m8260_cpm_dpalloc(sizeof(RTXBD) + 2, 16);
+ rtx = (RTXBD *)&immr->im_dprambase[dpaddr];
+ }
/* 24.21 - (1-3): ioports have been set up already */
@@ -338,7 +352,7 @@ int eth_init(bd_t *bis)
}
-void eth_halt(void)
+static void sec_halt(struct eth_device *dev)
{
volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl &= ~(SCC_GSMRL_ENR |
@@ -346,7 +360,7 @@ void eth_halt(void)
}
#if 0
-void restart(void)
+static void sec_restart(void)
{
volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
immr->im_cpm.cp_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl |= (SCC_GSMRL_ENR |
@@ -354,4 +368,20 @@ void restart(void)
}
#endif
-#endif
+int mpc82xx_scc_enet_initialize(bd_t *bis)
+{
+ struct eth_device *dev;
+
+ dev = (struct eth_device *) malloc(sizeof *dev);
+ memset(dev, 0, sizeof *dev);
+
+ sprintf(dev->name, "SCC ETHERNET");
+ dev->init = sec_init;
+ dev->halt = sec_halt;
+ dev->send = sec_send;
+ dev->recv = sec_rx;
+
+ eth_register(dev);
+
+ return 1;
+}
diff --git a/cpu/sh4/cpu.c b/cpu/sh4/cpu.c
index d94e139..52b6cfd 100644
--- a/cpu/sh4/cpu.c
+++ b/cpu/sh4/cpu.c
@@ -82,3 +82,11 @@ int dcache_status (void)
{
return 0;
}
+
+int cpu_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_SH_ETHER
+ sh_eth_initialize(bis);
+#endif
+ return 0;
+}
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 631336a..128dc11 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk
LIB := $(obj)libnet.a
COBJS-$(CONFIG_DRIVER_3C589) += 3c589.o
+COBJS-$(CONFIG_PPC4xx_EMAC) += 4xx_enet.o
COBJS-$(CONFIG_DRIVER_AX88180) += ax88180.o
COBJS-$(CONFIG_BCM570x) += bcm570x.o bcm570x_autoneg.o 5701rls.o
COBJS-$(CONFIG_BFIN_MAC) += bfin_mac.o
@@ -54,11 +55,11 @@ COBJS-$(CONFIG_NS8382X) += ns8382x.o
COBJS-$(CONFIG_DRIVER_NS9750_ETHERNET) += ns9750_eth.o
COBJS-$(CONFIG_PCNET) += pcnet.o
COBJS-$(CONFIG_PLB2800_ETHER) += plb2800_eth.o
-COBJS-$(CONFIG_PPC4xx_EMAC) += 4xx_enet.o
COBJS-$(CONFIG_DRIVER_RTL8019) += rtl8019.o
COBJS-$(CONFIG_RTL8139) += rtl8139.o
COBJS-$(CONFIG_RTL8169) += rtl8169.o
COBJS-$(CONFIG_DRIVER_S3C4510_ETH) += s3c4510b_eth.o
+COBJS-$(CONFIG_SH_ETHER) += sh_eth.o
COBJS-$(CONFIG_DRIVER_SMC91111) += smc91111.o
COBJS-$(CONFIG_DRIVER_SMC911X) += smc911x.o
COBJS-$(CONFIG_TIGON3) += tigon3.o bcm570x_autoneg.o 5701rls.o
@@ -68,7 +69,6 @@ COBJS-$(CONFIG_ULI526X) += uli526x.o
COBJS-$(CONFIG_VSC7385_ENET) += vsc7385.o
COBJS-$(CONFIG_XILINX_EMAC) += xilinx_emac.o
COBJS-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
-COBJS-$(CONFIG_SH_ETHER) += sh_eth.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 98e8c73..af0409b 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -317,6 +317,30 @@ static void macb_phy_reset(struct macb_device *macb)
netdev->name, status);
}
+#ifdef CONFIG_MACB_SEARCH_PHY
+static int macb_phy_find(struct macb_device *macb)
+{
+ int i;
+ u16 phy_id;
+
+ /* Search for PHY... */
+ for (i = 0; i < 32; i++) {
+ macb->phy_addr = i;
+ phy_id = macb_mdio_read(macb, MII_PHYSID1);
+ if (phy_id != 0xffff) {
+ printf("%s: PHY present at %d\n", macb->netdev.name, i);
+ return 1;
+ }
+ }
+
+ /* PHY isn't up to snuff */
+ printf("%s: PHY not found", macb->netdev.name);
+
+ return 0;
+}
+#endif /* CONFIG_MACB_SEARCH_PHY */
+
+
static int macb_phy_init(struct macb_device *macb)
{
struct eth_device *netdev = &macb->netdev;
@@ -325,6 +349,13 @@ static int macb_phy_init(struct macb_device *macb)
int media, speed, duplex;
int i;
+#ifdef CONFIG_MACB_SEARCH_PHY
+ /* Auto-detect phy_addr */
+ if (!macb_phy_find(macb)) {
+ return 0;
+ }
+#endif /* CONFIG_MACB_SEARCH_PHY */
+
/* Check if the PHY is up to snuff... */
phy_id = macb_mdio_read(macb, MII_PHYSID1);
if (phy_id == 0xffff) {
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 9e3cf98..ebe8588 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -24,6 +24,7 @@
#include <common.h>
#include <malloc.h>
#include <net.h>
+#include <netdev.h>
#include <asm/errno.h>
#include <asm/io.h>
@@ -36,12 +37,7 @@
# error "Please define CONFIG_SH_ETHER_PHY_ADDR"
#endif
-extern int eth_init(bd_t *bd);
-extern void eth_halt(void);
-extern int eth_rx(void);
-extern int eth_send(volatile void *packet, int length);
-
-static struct dev_info_s *dev;
+#define SH_ETH_PHY_DELAY 50000
/*
* Bits are written to the PHY serially using the
@@ -89,7 +85,7 @@ static void sh_eth_mii_ind_bus_release(int port)
udelay(1);
}
-static int sh_eth_mii_read_phy_bits(int port, u32 * val, int len)
+static void sh_eth_mii_read_phy_bits(int port, u32 *val, int len)
{
int i;
u32 pir;
@@ -106,8 +102,6 @@ static int sh_eth_mii_read_phy_bits(int port, u32 * val, int len)
outl(0, PIR(port));
udelay(1);
}
-
- return 0;
}
#define PHY_INIT 0xFFFFFFFF
@@ -183,26 +177,23 @@ static void sh_eth_mii_write_phy_reg(int port, u8 phy_addr, int reg, u16 val)
sh_eth_mii_ind_bus_release(port);
}
-void eth_halt(void)
-{
-}
-
-int eth_send(volatile void *packet, int len)
+int sh_eth_send(struct eth_device *dev, volatile void *packet, int len)
{
- int port = dev->port;
- struct port_info_s *port_info = &dev->port_info[port];
- int timeout;
- int rc = 0;
+ struct sh_eth_dev *eth = dev->priv;
+ int port = eth->port, ret = 0, timeout;
+ struct sh_eth_info *port_info = &eth->port_info[port];
if (!packet || len > 0xffff) {
- printf("eth_send: Invalid argument\n");
- return -EINVAL;
+ printf(SHETHER_NAME ": %s: Invalid argument\n", __func__);
+ ret = -EINVAL;
+ goto err;
}
/* packet must be a 4 byte boundary */
if ((int)packet & (4 - 1)) {
- printf("eth_send: packet not 4 byte alligned\n");
- return -EFAULT;
+ printf(SHETHER_NAME ": %s: packet not 4 byte alligned\n", __func__);
+ ret = -EFAULT;
+ goto err;
}
/* Update tx descriptor */
@@ -224,24 +215,25 @@ int eth_send(volatile void *packet, int len)
udelay(100);
if (timeout < 0) {
- printf("eth_send: transmit timeout\n");
- rc = -1;
+ printf(SHETHER_NAME ": transmit timeout\n");
+ ret = -ETIMEDOUT;
goto err;
}
-err:
port_info->tx_desc_cur++;
if (port_info->tx_desc_cur >= port_info->tx_desc_base + NUM_TX_DESC)
port_info->tx_desc_cur = port_info->tx_desc_base;
- return rc;
+ return ret;
+err:
+ return ret;
}
-int eth_rx(void)
+int sh_eth_recv(struct eth_device *dev)
{
- int port = dev->port;
- struct port_info_s *port_info = &dev->port_info[port];
- int len = 0;
+ struct sh_eth_dev *eth = dev->priv;
+ int port = eth->port, len = 0;
+ struct sh_eth_info *port_info = &eth->port_info[port];
volatile u8 *packet;
/* Check if the rx descriptor is ready */
@@ -275,10 +267,10 @@ int eth_rx(void)
}
#define EDMR_INIT_CNT 1000
-static int sh_eth_reset(struct dev_info_s *dev)
+static int sh_eth_reset(struct sh_eth_dev *eth)
{
- int port = dev->port;
- int i;
+ int port = eth->port;
+ int ret = 0, i;
/* Start e-dmac transmitter and receiver */
outl(EDSR_ENALL, EDSR(port));
@@ -292,33 +284,36 @@ static int sh_eth_reset(struct dev_info_s *dev)
}
if (i == EDMR_INIT_CNT) {
- printf("Error: Software reset timeout\n");
- return -1;
+ printf(SHETHER_NAME ": Software reset timeout\n");
+ ret = -EIO;
}
- return 0;
+
+ return ret;
}
-static int sh_eth_tx_desc_init(struct dev_info_s *dev)
+static int sh_eth_tx_desc_init(struct sh_eth_dev *eth)
{
- int port = dev->port;
- struct port_info_s *port_info = &dev->port_info[port];
+ int port = eth->port, i, ret = 0;
u32 tmp_addr;
+ struct sh_eth_info *port_info = &eth->port_info[port];
struct tx_desc_s *cur_tx_desc;
- int i;
- /* Allocate tx descriptors. They must be TX_DESC_SIZE bytes
- aligned */
- if (!(port_info->tx_desc_malloc = malloc(NUM_TX_DESC *
+ /*
+ * Allocate tx descriptors. They must be TX_DESC_SIZE bytes aligned
+ */
+ port_info->tx_desc_malloc = malloc(NUM_TX_DESC *
sizeof(struct tx_desc_s) +
- TX_DESC_SIZE - 1))) {
- printf("Error: malloc failed\n");
- return -ENOMEM;
+ TX_DESC_SIZE - 1);
+ if (!port_info->tx_desc_malloc) {
+ printf(SHETHER_NAME ": malloc failed\n");
+ ret = -ENOMEM;
+ goto err;
}
+
tmp_addr = (u32) (((int)port_info->tx_desc_malloc + TX_DESC_SIZE - 1) &
~(TX_DESC_SIZE - 1));
/* Make sure we use a P2 address (non-cacheable) */
port_info->tx_desc_base = (struct tx_desc_s *)ADDR_TO_P2(tmp_addr);
-
port_info->tx_desc_cur = port_info->tx_desc_base;
/* Initialize all descriptors */
@@ -340,26 +335,30 @@ static int sh_eth_tx_desc_init(struct dev_info_s *dev)
outl(ADDR_TO_PHY(cur_tx_desc), TDFXR(port));
outl(0x01, TDFFR(port));/* Last discriptor bit */
- return 0;
+err:
+ return ret;
}
-static int sh_eth_rx_desc_init(struct dev_info_s *dev)
+static int sh_eth_rx_desc_init(struct sh_eth_dev *eth)
{
- int port = dev->port;
- struct port_info_s *port_info = &dev->port_info[port];
- u32 tmp_addr;
+ int port = eth->port, i , ret = 0;
+ struct sh_eth_info *port_info = &eth->port_info[port];
struct rx_desc_s *cur_rx_desc;
+ u32 tmp_addr;
u8 *rx_buf;
- int i;
- /* Allocate rx descriptors. They must be RX_DESC_SIZE bytes
- aligned */
- if (!(port_info->rx_desc_malloc = malloc(NUM_RX_DESC *
+ /*
+ * Allocate rx descriptors. They must be RX_DESC_SIZE bytes aligned
+ */
+ port_info->rx_desc_malloc = malloc(NUM_RX_DESC *
sizeof(struct rx_desc_s) +
- RX_DESC_SIZE - 1))) {
- printf("Error: malloc failed\n");
- return -ENOMEM;
+ RX_DESC_SIZE - 1);
+ if (!port_info->rx_desc_malloc) {
+ printf(SHETHER_NAME ": malloc failed\n");
+ ret = -ENOMEM;
+ goto err;
}
+
tmp_addr = (u32) (((int)port_info->rx_desc_malloc + RX_DESC_SIZE - 1) &
~(RX_DESC_SIZE - 1));
/* Make sure we use a P2 address (non-cacheable) */
@@ -367,15 +366,17 @@ static int sh_eth_rx_desc_init(struct dev_info_s *dev)
port_info->rx_desc_cur = port_info->rx_desc_base;
- /* Allocate rx data buffers. They must be 32 bytes aligned and in
- P2 area */
- if (!(port_info->rx_buf_malloc = malloc(NUM_RX_DESC * MAX_BUF_SIZE +
- 31))) {
- printf("Error: malloc failed\n");
- free(port_info->rx_desc_malloc);
- port_info->rx_desc_malloc = NULL;
- return -ENOMEM;
+ /*
+ * Allocate rx data buffers. They must be 32 bytes aligned and in
+ * P2 area
+ */
+ port_info->rx_buf_malloc = malloc(NUM_RX_DESC * MAX_BUF_SIZE + 31);
+ if (!port_info->rx_buf_malloc) {
+ printf(SHETHER_NAME ": malloc failed\n");
+ ret = -ENOMEM;
+ goto err_buf_malloc;
}
+
tmp_addr = (u32)(((int)port_info->rx_buf_malloc + (32 - 1)) &
~(32 - 1));
port_info->rx_buf_base = (u8 *)ADDR_TO_P2(tmp_addr);
@@ -399,18 +400,31 @@ static int sh_eth_rx_desc_init(struct dev_info_s *dev)
outl(ADDR_TO_PHY(cur_rx_desc), RDFXR(port));
outl(RDFFR_RDLF, RDFFR(port));
- return 0;
+ return ret;
+
+err_buf_malloc:
+ free(port_info->rx_desc_malloc);
+ port_info->rx_desc_malloc = NULL;
+
+err:
+ return ret;
}
-static void sh_eth_desc_free(struct dev_info_s *dev)
+static void sh_eth_tx_desc_free(struct sh_eth_dev *eth)
{
- int port = dev->port;
- struct port_info_s *port_info = &dev->port_info[port];
+ int port = eth->port;
+ struct sh_eth_info *port_info = &eth->port_info[port];
if (port_info->tx_desc_malloc) {
free(port_info->tx_desc_malloc);
port_info->tx_desc_malloc = NULL;
}
+}
+
+static void sh_eth_rx_desc_free(struct sh_eth_dev *eth)
+{
+ int port = eth->port;
+ struct sh_eth_info *port_info = &eth->port_info[port];
if (port_info->rx_desc_malloc) {
free(port_info->rx_desc_malloc);
@@ -423,36 +437,48 @@ static void sh_eth_desc_free(struct dev_info_s *dev)
}
}
-static int sh_eth_desc_init(struct dev_info_s *dev)
+static int sh_eth_desc_init(struct sh_eth_dev *eth)
{
- int rc;
+ int ret = 0;
- if ((rc = sh_eth_tx_desc_init(dev)) || (rc = sh_eth_rx_desc_init(dev))) {
- sh_eth_desc_free(dev);
- return rc;
- }
+ ret = sh_eth_tx_desc_init(eth);
+ if (ret)
+ goto err_tx_init;
- return 0;
+ ret = sh_eth_rx_desc_init(eth);
+ if (ret)
+ goto err_rx_init;
+
+ return ret;
+err_rx_init:
+ sh_eth_tx_desc_free(eth);
+
+err_tx_init:
+ return ret;
}
-static int sh_eth_phy_config(struct dev_info_s *dev)
+static int sh_eth_phy_config(struct sh_eth_dev *eth)
{
- int port = dev->port;
- struct port_info_s *port_info = &dev->port_info[port];
- int timeout;
+ int port = eth->port, timeout, ret = 0;
+ struct sh_eth_info *port_info = &eth->port_info[port];
u32 val;
+
/* Reset phy */
- sh_eth_mii_write_phy_reg(port, port_info->phy_addr, PHY_CTRL, PHY_C_RESET);
+ sh_eth_mii_write_phy_reg
+ (port, port_info->phy_addr, PHY_CTRL, PHY_C_RESET);
timeout = 10;
while (timeout--) {
- val = sh_eth_mii_read_phy_reg(port, port_info->phy_addr, PHY_CTRL);
+ val = sh_eth_mii_read_phy_reg(port,
+ port_info->phy_addr, PHY_CTRL);
if (!(val & PHY_C_RESET))
break;
- udelay(50000);
+ udelay(SH_ETH_PHY_DELAY);
}
+
if (timeout < 0) {
- printf("%s phy reset timeout\n", __func__);
- return -1;
+ printf(SHETHER_NAME ": phy reset timeout\n");
+ ret = -EIO;
+ goto err_tout;
}
/* Advertise 100/10 baseT full/half duplex */
@@ -467,23 +493,27 @@ static int sh_eth_phy_config(struct dev_info_s *dev)
val = sh_eth_mii_read_phy_reg(port, port_info->phy_addr, 1);
if (val & PHY_S_ANEGC)
break;
- udelay(50000);
+
+ udelay(SH_ETH_PHY_DELAY);
}
+
if (timeout < 0) {
- printf("sh_eth_phy_config() phy auto-negotiation failed\n");
- return -1;
+ printf(SHETHER_NAME ": phy auto-negotiation failed\n");
+ ret = -ETIMEDOUT;
+ goto err_tout;
}
- return 0;
+ return ret;
+
+err_tout:
+ return ret;
}
-static int sh_eth_config(struct dev_info_s *dev, bd_t * bd)
+static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd)
{
- int port = dev->port;
- struct port_info_s *port_info = &dev->port_info[port];
- u32 val;
- u32 phy_status;
- int rc;
+ int port = eth->port, ret = 0;
+ u32 val, phy_status;
+ struct sh_eth_info *port_info = &eth->port_info[port];
/* Configure e-dmac registers */
outl((inl(EDMR(port)) & ~EMDR_DESC_R) | EDMR_EL, EDMR(port));
@@ -513,20 +543,20 @@ static int sh_eth_config(struct dev_info_s *dev, bd_t * bd)
outl(TPAUSER_TPAUSE, TPAUSER(port));
/* Configure phy */
- if ((rc = sh_eth_phy_config(dev)))
- return rc;
-
+ ret = sh_eth_phy_config(eth);
+ if (ret) {
+ printf(SHETHER_NAME ":i phy config timeout\n");
+ goto err_phy_cfg;
+ }
/* Read phy status to finish configuring the e-mac */
- phy_status = sh_eth_mii_read_phy_reg(dev->port,
- dev->port_info[dev->port].phy_addr,
- 1);
+ phy_status = sh_eth_mii_read_phy_reg(port, port_info->phy_addr, 1);
/* Set the transfer speed */
if (phy_status & (PHY_S_100X_F|PHY_S_100X_H)) {
- printf("100Base/");
+ printf(SHETHER_NAME ": 100Base/");
outl(GECMR_100B, GECMR(port));
} else {
- printf("10Base/");
+ printf(SHETHER_NAME ": 10Base/");
outl(GECMR_10B, GECMR(port));
}
@@ -538,27 +568,34 @@ static int sh_eth_config(struct dev_info_s *dev, bd_t * bd)
printf("Half\n");
outl((ECMR_CHG_DM|ECMR_RE|ECMR_TE), ECMR(port));
}
- return 0;
+
+ return ret;
+
+err_phy_cfg:
+ return ret;
}
-static int sh_eth_start(struct dev_info_s *dev)
+static void sh_eth_start(struct sh_eth_dev *eth)
{
/*
* Enable the e-dmac receiver only. The transmitter will be enabled when
* we have something to transmit
*/
- outl(EDRRR_R, EDRRR(dev->port));
+ outl(EDRRR_R, EDRRR(eth->port));
+}
- return 0;
+static void sh_eth_stop(struct sh_eth_dev *eth)
+{
+ outl(~EDRRR_R, EDRRR(eth->port));
}
static int sh_eth_get_mac(bd_t *bd)
{
char *s, *e;
- int i;
s = getenv("ethaddr");
if (s != NULL) {
+ int i;
for (i = 0; i < 6; ++i) {
bd->bi_enetaddr[i] = s ? simple_strtoul(s, &e, 16) : 0;
if (s)
@@ -570,34 +607,92 @@ static int sh_eth_get_mac(bd_t *bd)
return 0;
}
-int eth_init(bd_t *bd)
+int sh_eth_init(struct eth_device *dev, bd_t *bd)
{
- int rc;
- /* Allocate main device information structure */
- if (!(dev = malloc(sizeof(*dev)))) {
- printf("eth_init: malloc failed\n");
- return -ENOMEM;
- }
+ int ret = 0;
+ struct sh_eth_dev *eth = dev->priv;
- memset(dev, 0, sizeof(*dev));
+ ret = sh_eth_reset(eth);
+ if (ret)
+ goto err;
- dev->port = CONFIG_SH_ETHER_USE_PORT;
- dev->port_info[dev->port].phy_addr = CONFIG_SH_ETHER_PHY_ADDR;
+ ret = sh_eth_desc_init(eth);
+ if (ret)
+ goto err;
- sh_eth_get_mac(bd);
+ ret = sh_eth_config(eth, bd);
+ if (ret)
+ goto err_config;
+
+ sh_eth_start(eth);
+
+ return ret;
- if ((rc = sh_eth_reset(dev)) || (rc = sh_eth_desc_init(dev)))
+err_config:
+ sh_eth_tx_desc_free(eth);
+ sh_eth_rx_desc_free(eth);
+
+err:
+ return ret;
+}
+
+void sh_eth_halt(struct eth_device *dev)
+{
+ struct sh_eth_dev *eth = dev->priv;
+
+ sh_eth_reset(eth);
+ sh_eth_stop(eth);
+}
+
+int sh_eth_initialize(bd_t *bd)
+{
+ int ret = 0;
+ struct sh_eth_dev *eth = NULL;
+ struct eth_device *dev = NULL;
+
+ eth = (struct sh_eth_dev *)malloc(sizeof(struct sh_eth_dev));
+ if (!eth) {
+ printf(SHETHER_NAME ": %s: malloc failed\n", __func__);
+ ret = -ENOMEM;
goto err;
+ }
- if ((rc = sh_eth_config(dev, bd)) || (rc = sh_eth_start(dev)))
- goto err_desc;
+ dev = (struct eth_device *)malloc(sizeof(struct eth_device));
+ if (!dev) {
+ printf(SHETHER_NAME ": %s: malloc failed\n", __func__);
+ ret = -ENOMEM;
+ goto err;
+ }
+ memset(dev, 0, sizeof(struct eth_device));
+ memset(eth, 0, sizeof(struct sh_eth_dev));
- return 0;
+ eth->port = CONFIG_SH_ETHER_USE_PORT;
+ eth->port_info[eth->port].phy_addr = CONFIG_SH_ETHER_PHY_ADDR;
+
+ dev->priv = (void *)eth;
+ dev->iobase = 0;
+ dev->init = sh_eth_init;
+ dev->halt = sh_eth_halt;
+ dev->send = sh_eth_send;
+ dev->recv = sh_eth_recv;
+ eth->port_info[eth->port].dev = dev;
+
+ sprintf(dev->name, SHETHER_NAME);
+
+ /* Register Device to EtherNet subsystem */
+ eth_register(dev);
+
+ sh_eth_get_mac(bd);
+
+ return ret;
-err_desc:
- sh_eth_desc_free(dev);
err:
- free(dev);
- printf("eth_init: Failed\n");
- return rc;
+ if (dev)
+ free(dev);
+
+ if (eth)
+ free(eth);
+
+ printf(SHETHER_NAME ": Failed\n");
+ return ret;
}
diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h
index 9cf0ea0..a13fff0 100644
--- a/drivers/net/sh_eth.h
+++ b/drivers/net/sh_eth.h
@@ -20,6 +20,7 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <netdev.h>
#include <asm/types.h>
#define SHETHER_NAME "sh_eth"
@@ -48,7 +49,7 @@
#define TX_DESC_PADDING 4
#define TX_DESC_SIZE (12 + TX_DESC_PADDING)
-/* Tx descriptor. We always use 4 bytes of padding */
+/* Tx descriptor. We always use 3 bytes of padding */
struct tx_desc_s {
volatile u32 td0;
u32 td1;
@@ -72,7 +73,7 @@ struct rx_desc_s {
u32 padding;
};
-struct port_info_s {
+struct sh_eth_info {
struct tx_desc_s *tx_desc_malloc;
struct tx_desc_s *tx_desc_base;
struct tx_desc_s *tx_desc_cur;
@@ -83,11 +84,12 @@ struct port_info_s {
u8 *rx_buf_base;
u8 mac_addr[6];
u8 phy_addr;
+ struct eth_device *dev;
};
-struct dev_info_s {
+struct sh_eth_dev {
int port;
- struct port_info_s port_info[MAX_PORT_NUM];
+ struct sh_eth_info port_info[MAX_PORT_NUM];
};
/* Register Address */
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 648c94c..9cc4fce 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -34,21 +34,24 @@
#endif
#if defined (CONFIG_DRIVER_SMC911X_32_BIT)
-static inline u32 reg_read(u32 addr)
+static inline u32 __smc911x_reg_read(u32 addr)
{
return *(volatile u32*)addr;
}
-static inline void reg_write(u32 addr, u32 val)
+u32 smc911x_reg_read(u32 addr) __attribute__((weak, alias("__smc911x_reg_read")));
+
+static inline void __smc911x_reg_write(u32 addr, u32 val)
{
*(volatile u32*)addr = val;
}
+void smc911x_reg_write(u32 addr, u32 val) __attribute__((weak, alias("__smc911x_reg_write")));
#elif defined (CONFIG_DRIVER_SMC911X_16_BIT)
-static inline u32 reg_read(u32 addr)
+static inline u32 smc911x_reg_read(u32 addr)
{
volatile u16 *addr_16 = (u16 *)addr;
return ((*addr_16 & 0x0000ffff) | (*(addr_16 + 1) << 16));
}
-static inline void reg_write(u32 addr, u32 val)
+static inline void smc911x_reg_write(u32 addr, u32 val)
{
*(volatile u16*)addr = (u16)val;
*(volatile u16*)(addr + 2) = (u16)(val >> 16);
@@ -58,9 +61,9 @@ static inline void reg_write(u32 addr, u32 val)
#endif /* CONFIG_DRIVER_SMC911X_16_BIT */
u32 pkt_data_pull(u32 addr) \
- __attribute__ ((weak, alias ("reg_read")));
+ __attribute__ ((weak, alias ("smc911x_reg_read")));
void pkt_data_push(u32 addr, u32 val) \
- __attribute__ ((weak, alias ("reg_write")));
+ __attribute__ ((weak, alias ("smc911x_reg_write")));
#define mdelay(n) udelay((n)*1000)
@@ -381,6 +384,7 @@ void pkt_data_push(u32 addr, u32 val) \
#define CHIP_9116 0x116
#define CHIP_9117 0x117
#define CHIP_9118 0x118
+#define CHIP_9211 0x9211
#define CHIP_9215 0x115a
#define CHIP_9216 0x116a
#define CHIP_9217 0x117a
@@ -396,6 +400,7 @@ static const struct chip_id chip_ids[] = {
{ CHIP_9116, "LAN9116" },
{ CHIP_9117, "LAN9117" },
{ CHIP_9118, "LAN9118" },
+ { CHIP_9211, "LAN9211" },
{ CHIP_9215, "LAN9215" },
{ CHIP_9216, "LAN9216" },
{ CHIP_9217, "LAN9217" },
@@ -407,22 +412,22 @@ static const struct chip_id chip_ids[] = {
u32 smc911x_get_mac_csr(u8 reg)
{
- while (reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
+ while (smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
;
- reg_write(MAC_CSR_CMD, MAC_CSR_CMD_CSR_BUSY | MAC_CSR_CMD_R_NOT_W | reg);
- while (reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
+ smc911x_reg_write(MAC_CSR_CMD, MAC_CSR_CMD_CSR_BUSY | MAC_CSR_CMD_R_NOT_W | reg);
+ while (smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
;
- return reg_read(MAC_CSR_DATA);
+ return smc911x_reg_read(MAC_CSR_DATA);
}
void smc911x_set_mac_csr(u8 reg, u32 data)
{
- while (reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
+ while (smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
;
- reg_write(MAC_CSR_DATA, data);
- reg_write(MAC_CSR_CMD, MAC_CSR_CMD_CSR_BUSY | reg);
- while (reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
+ smc911x_reg_write(MAC_CSR_DATA, data);
+ smc911x_reg_write(MAC_CSR_CMD, MAC_CSR_CMD_CSR_BUSY | reg);
+ while (smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
;
}
@@ -496,10 +501,10 @@ static int smc911x_phy_reset(void)
{
u32 reg;
- reg = reg_read(PMT_CTRL);
+ reg = smc911x_reg_read(PMT_CTRL);
reg &= ~0xfffff030;
reg |= PMT_CTRL_PHY_RST;
- reg_write(PMT_CTRL, reg);
+ smc911x_reg_write(PMT_CTRL, reg);
mdelay(100);
@@ -541,13 +546,13 @@ static void smc911x_reset(void)
int timeout;
/* Take out of PM setting first */
- if (reg_read(PMT_CTRL) & PMT_CTRL_READY) {
+ if (smc911x_reg_read(PMT_CTRL) & PMT_CTRL_READY) {
/* Write to the bytetest will take out of powerdown */
- reg_write(BYTE_TEST, 0x0);
+ smc911x_reg_write(BYTE_TEST, 0x0);
timeout = 10;
- while (timeout-- && !(reg_read(PMT_CTRL) & PMT_CTRL_READY))
+ while (timeout-- && !(smc911x_reg_read(PMT_CTRL) & PMT_CTRL_READY))
udelay(10);
if (!timeout) {
printf(DRIVERNAME
@@ -557,12 +562,12 @@ static void smc911x_reset(void)
}
/* Disable interrupts */
- reg_write(INT_EN, 0);
+ smc911x_reg_write(INT_EN, 0);
- reg_write(HW_CFG, HW_CFG_SRST);
+ smc911x_reg_write(HW_CFG, HW_CFG_SRST);
timeout = 1000;
- while (timeout-- && reg_read(E2P_CMD) & E2P_CMD_EPC_BUSY)
+ while (timeout-- && smc911x_reg_read(E2P_CMD) & E2P_CMD_EPC_BUSY)
udelay(10);
if (!timeout) {
@@ -572,23 +577,23 @@ static void smc911x_reset(void)
/* Reset the FIFO level and flow control settings */
smc911x_set_mac_csr(FLOW, FLOW_FCPT | FLOW_FCEN);
- reg_write(AFC_CFG, 0x0050287F);
+ smc911x_reg_write(AFC_CFG, 0x0050287F);
/* Set to LED outputs */
- reg_write(GPIO_CFG, 0x70070000);
+ smc911x_reg_write(GPIO_CFG, 0x70070000);
}
static void smc911x_enable(void)
{
/* Enable TX */
- reg_write(HW_CFG, 8 << 16 | HW_CFG_SF);
+ smc911x_reg_write(HW_CFG, 8 << 16 | HW_CFG_SF);
- reg_write(GPT_CFG, GPT_CFG_TIMER_EN | 10000);
+ smc911x_reg_write(GPT_CFG, GPT_CFG_TIMER_EN | 10000);
- reg_write(TX_CFG, TX_CFG_TX_ON);
+ smc911x_reg_write(TX_CFG, TX_CFG_TX_ON);
/* no padding to start of packets */
- reg_write(RX_CFG, 0);
+ smc911x_reg_write(RX_CFG, 0);
smc911x_set_mac_csr(MAC_CR, MAC_CR_TXEN | MAC_CR_RXEN | MAC_CR_HBDIS);
@@ -600,13 +605,13 @@ int eth_init(bd_t *bd)
printf(DRIVERNAME ": initializing\n");
- val = reg_read(BYTE_TEST);
+ val = smc911x_reg_read(BYTE_TEST);
if (val != 0x87654321) {
printf(DRIVERNAME ": Invalid chip endian 0x%08lx\n", val);
goto err_out;
}
- val = reg_read(ID_REV) >> 16;
+ val = smc911x_reg_read(ID_REV) >> 16;
for (i = 0; chip_ids[i].id != 0; i++) {
if (chip_ids[i].id == val) break;
}
@@ -640,8 +645,8 @@ int eth_send(volatile void *packet, int length)
u32 tmplen;
u32 status;
- reg_write(TX_DATA_FIFO, TX_CMD_A_INT_FIRST_SEG | TX_CMD_A_INT_LAST_SEG | length);
- reg_write(TX_DATA_FIFO, length);
+ smc911x_reg_write(TX_DATA_FIFO, TX_CMD_A_INT_FIRST_SEG | TX_CMD_A_INT_LAST_SEG | length);
+ smc911x_reg_write(TX_DATA_FIFO, length);
tmplen = (length + 3) / 4;
@@ -649,12 +654,12 @@ int eth_send(volatile void *packet, int length)
pkt_data_push(TX_DATA_FIFO, *data++);
/* wait for transmission */
- while (!((reg_read(TX_FIFO_INF) & TX_FIFO_INF_TSUSED) >> 16));
+ while (!((smc911x_reg_read(TX_FIFO_INF) & TX_FIFO_INF_TSUSED) >> 16));
/* get status. Ignore 'no carrier' error, it has no meaning for
* full duplex operation
*/
- status = reg_read(TX_STATUS_FIFO) & (TX_STS_LOC | TX_STS_LATE_COLL |
+ status = smc911x_reg_read(TX_STATUS_FIFO) & (TX_STS_LOC | TX_STS_LATE_COLL |
TX_STS_MANY_COLL | TX_STS_MANY_DEFER | TX_STS_UNDERRUN);
if (!status)
@@ -681,11 +686,11 @@ int eth_rx(void)
u32 pktlen, tmplen;
u32 status;
- if ((reg_read(RX_FIFO_INF) & RX_FIFO_INF_RXSUSED) >> 16) {
- status = reg_read(RX_STATUS_FIFO);
+ if ((smc911x_reg_read(RX_FIFO_INF) & RX_FIFO_INF_RXSUSED) >> 16) {
+ status = smc911x_reg_read(RX_STATUS_FIFO);
pktlen = (status & RX_STS_PKT_LEN) >> 16;
- reg_write(RX_CFG, 0);
+ smc911x_reg_write(RX_CFG, 0);
tmplen = (pktlen + 2+ 3) / 4;
while (tmplen--)
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index fbc9a6d..dc90f23 100644
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -1141,6 +1141,9 @@ struct phy_info phy_info_M88E1118 = {
{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
{0x16, 0x0002, NULL}, /* Change Page Number */
{0x15, 0x1070, NULL}, /* Delay RGMII TX and RX */
+ {0x16, 0x0003, NULL}, /* Change Page Number */
+ {0x10, 0x021e, NULL}, /* Adjust LED control */
+ {0x16, 0x0000, NULL}, /* Change Page Number */
{MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
{MIIM_ANAR, MIIM_ANAR_INIT, NULL},
{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
@@ -1152,6 +1155,7 @@ struct phy_info phy_info_M88E1118 = {
/* Status is read once to clear old link state */
{MIIM_STATUS, miim_read, NULL},
/* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
/* Read the status */
{MIIM_88E1011_PHY_STATUS, miim_read,
&mii_parse_88E1011_psr},
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index 829f082..d613f3e 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -603,6 +603,55 @@ static int fixed_phy_read_status (struct uec_mii_info *mii_info)
return 0;
}
+static int smsc_config_aneg (struct uec_mii_info *mii_info)
+{
+ return 0;
+}
+
+static int smsc_read_status (struct uec_mii_info *mii_info)
+{
+ u16 status;
+ int err;
+
+ /* Update the link, but return if there
+ * was an error */
+ err = genmii_update_link (mii_info);
+ if (err)
+ return err;
+
+ /* If the link is up, read the speed and duplex */
+ /* If we aren't autonegotiating, assume speeds
+ * are as set */
+ if (mii_info->autoneg && mii_info->link) {
+ int val;
+
+ status = phy_read (mii_info, 0x1f);
+ val = (status & 0x1c) >> 2;
+
+ switch (val) {
+ case 1:
+ mii_info->duplex = DUPLEX_HALF;
+ mii_info->speed = SPEED_10;
+ break;
+ case 5:
+ mii_info->duplex = DUPLEX_FULL;
+ mii_info->speed = SPEED_10;
+ break;
+ case 2:
+ mii_info->duplex = DUPLEX_HALF;
+ mii_info->speed = SPEED_100;
+ break;
+ case 6:
+ mii_info->duplex = DUPLEX_FULL;
+ mii_info->speed = SPEED_100;
+ break;
+ }
+ mii_info->pause = 0;
+ }
+
+ return 0;
+}
+
static struct phy_info phy_info_dm9161 = {
.phy_id = 0x0181b880,
.phy_id_mask = 0x0ffffff0,
@@ -655,6 +704,15 @@ static struct phy_info phy_info_fixedphy = {
.read_status = fixed_phy_read_status,
};
+static struct phy_info phy_info_smsclan8700 = {
+ .phy_id = 0x0007c0c0,
+ .phy_id_mask = 0xfffffff0,
+ .name = "SMSC LAN8700",
+ .features = MII_BASIC_FEATURES,
+ .config_aneg = smsc_config_aneg,
+ .read_status = smsc_read_status,
+};
+
static struct phy_info phy_info_genmii = {
.phy_id = 0x00000000,
.phy_id_mask = 0x00000000,
@@ -669,6 +727,7 @@ static struct phy_info *phy_info[] = {
&phy_info_dm9161a,
&phy_info_marvell,
&phy_info_bcm5481,
+ &phy_info_smsclan8700,
&phy_info_fixedphy,
&phy_info_genmii,
NULL
diff --git a/include/configs/sh7763rdp.h b/include/configs/sh7763rdp.h
index 8a76dad..4ea79cf 100644
--- a/include/configs/sh7763rdp.h
+++ b/include/configs/sh7763rdp.h
@@ -118,6 +118,7 @@
#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
/* Ether */
+#define CONFIG_NET_MULTI 1
#define CONFIG_SH_ETHER 1
#define CONFIG_SH_ETHER_USE_PORT (1)
#define CONFIG_SH_ETHER_PHY_ADDR (0x01)
diff --git a/include/net.h b/include/net.h
index d2d394f..bbe0d4b 100644
--- a/include/net.h
+++ b/include/net.h
@@ -474,6 +474,22 @@ static inline int is_multicast_ether_addr(const u8 *addr)
return (0x01 & addr[0]);
}
+/**
+ * is_valid_ether_addr - Determine if the given Ethernet address is valid
+ * @addr: Pointer to a six-byte array containing the Ethernet address
+ *
+ * Check that the Ethernet address (MAC) is not 00:00:00:00:00:00, is not
+ * a multicast address, and is not FF:FF:FF:FF:FF:FF.
+ *
+ * Return true if the address is valid.
+ */
+static inline int is_valid_ether_addr(const u8 * addr)
+{
+ /* FF:FF:FF:FF:FF:FF is a multicast address so we don't need to
+ * explicitly check for it here. */
+ return !is_multicast_ether_addr(addr) && !is_zero_ether_addr(addr);
+}
+
/* Convert an IP address to a string */
extern void ip_to_string (IPaddr_t x, char *s);
diff --git a/include/netdev.h b/include/netdev.h
index 751f0da..ce1ecbd 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -57,6 +57,7 @@ int mcffec_initialize(bd_t *bis);
int mpc512x_fec_initialize(bd_t *bis);
int mpc5xxx_fec_initialize(bd_t *bis);
int mpc8220_fec_initialize(bd_t *bis);
+int mpc82xx_scc_enet_initialize(bd_t *bis);
int natsemi_initialize(bd_t *bis);
int npe_initialize(bd_t *bis);
int ns8382x_initialize(bd_t *bis);
@@ -70,6 +71,7 @@ int skge_initialize(bd_t *bis);
int tsi108_eth_initialize(bd_t *bis);
int uec_initialize(int index);
int uli526x_initialize(bd_t *bis);
+int sh_eth_initialize(bd_t *bis);
/* Boards with PCI network controllers can call this from their board_eth_init()
* function to initialize whatever's on board.
diff --git a/net/net.c b/net/net.c
index e6547f9..459baf4 100644
--- a/net/net.c
+++ b/net/net.c
@@ -1684,7 +1684,7 @@ NetSetEther(volatile uchar * xet, uchar * addr, uint prot)
void
NetSetIP(volatile uchar * xip, IPaddr_t dest, int dport, int sport, int len)
{
- volatile IP_t *ip = (IP_t *)xip;
+ IP_t *ip = (IP_t *)xip;
/*
* If the data is an odd number of bytes, zero the