diff options
Diffstat (limited to 'arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S')
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S | 146 |
1 files changed, 127 insertions, 19 deletions
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S index 72f2c11..a2185f2 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S +++ b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S @@ -10,15 +10,66 @@ #include <linux/linkage.h> #include <asm/gic.h> #include <asm/macro.h> +#include <asm/arch-fsl-layerscape/soc.h> #ifdef CONFIG_MP #include <asm/arch/mp.h> #endif #ifdef CONFIG_FSL_LSCH3 #include <asm/arch-fsl-layerscape/immap_lsch3.h> -#include <asm/arch-fsl-layerscape/soc.h> #endif #include <asm/u-boot.h> +/* Get GIC offset +* For LS1043a rev1.0, GIC base address align with 4k. +* For LS1043a rev1.1, if DCFG_GIC400_ALIGN[GIC_ADDR_BIT] +* is set, GIC base address align with 4K, or else align +* with 64k. +* output: +* x0: the base address of GICD +* x1: the base address of GICC +*/ +ENTRY(get_gic_offset) + ldr x0, =GICD_BASE +#ifdef CONFIG_GICV2 + ldr x1, =GICC_BASE +#endif +#ifdef CONFIG_HAS_FEATURE_GIC64K_ALIGN + ldr x2, =DCFG_CCSR_SVR + ldr w2, [x2] + rev w2, w2 + mov w3, w2 + ands w3, w3, #SVR_WO_E << 8 + mov w4, #SVR_LS1043A << 8 + cmp w3, w4 + b.ne 1f + ands w2, w2, #0xff + cmp w2, #REV1_0 + b.eq 1f + ldr x2, =SCFG_GIC400_ALIGN + ldr w2, [x2] + rev w2, w2 + tbnz w2, #GIC_ADDR_BIT, 1f + ldr x0, =GICD_BASE_64K +#ifdef CONFIG_GICV2 + ldr x1, =GICC_BASE_64K +#endif +1: +#endif + ret +ENDPROC(get_gic_offset) + +ENTRY(smp_kick_all_cpus) + /* Kick secondary cpus up by SGI 0 interrupt */ +#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3) + mov x29, lr /* Save LR */ + bl get_gic_offset + bl gic_kick_secondary_cpus + mov lr, x29 /* Restore LR */ +#endif + ret +ENDPROC(smp_kick_all_cpus) + + ENTRY(lowlevel_init) mov x29, lr /* Save LR */ @@ -29,6 +80,26 @@ ENTRY(lowlevel_init) ldr x0, =CCI_AUX_CONTROL_BASE(20) ldr x1, =0x00000010 bl ccn504_set_aux + + /* + * Set forced-order mode in RNI-6, RNI-20 + * This is required for performance optimization on LS2088A + * LS2080A family does not support setting forced-order mode, + * so skip this operation for LS2080A family + */ + bl get_svr + lsr w0, w0, #16 + ldr w1, =SVR_DEV_LS2080A + cmp w0, w1 + b.eq 1f + + ldr x0, =CCI_AUX_CONTROL_BASE(6) + ldr x1, =0x00000020 + bl ccn504_set_aux + ldr x0, =CCI_AUX_CONTROL_BASE(20) + ldr x1, =0x00000020 + bl ccn504_set_aux +1: #endif /* Add fully-coherent masters to DVM domain */ @@ -110,15 +181,14 @@ ENTRY(lowlevel_init) /* Initialize GIC Secure Bank Status */ #if defined(CONFIG_GICV2) || defined(CONFIG_GICV3) branch_if_slave x0, 1f - ldr x0, =GICD_BASE + bl get_gic_offset bl gic_init_secure 1: #ifdef CONFIG_GICV3 ldr x0, =GICR_BASE bl gic_init_secure_percpu #elif defined(CONFIG_GICV2) - ldr x0, =GICD_BASE - ldr x1, =GICC_BASE + bl get_gic_offset bl gic_init_secure_percpu #endif #endif @@ -209,10 +279,47 @@ ENTRY(lowlevel_init) isb #endif +#if defined(CONFIG_FSL_LSCH2) && !defined(CONFIG_SPL_BUILD) + bl fsl_ocram_init +#endif + mov lr, x29 /* Restore LR */ ret ENDPROC(lowlevel_init) +#if defined(CONFIG_FSL_LSCH2) && !defined(CONFIG_SPL_BUILD) +ENTRY(fsl_ocram_init) + mov x28, lr /* Save LR */ + bl fsl_clear_ocram + bl fsl_ocram_clear_ecc_err + mov lr, x28 /* Restore LR */ + ret +ENDPROC(fsl_ocram_init) + +ENTRY(fsl_clear_ocram) +/* Clear OCRAM */ + ldr x0, =CONFIG_SYS_FSL_OCRAM_BASE + ldr x1, =(CONFIG_SYS_FSL_OCRAM_BASE + CONFIG_SYS_FSL_OCRAM_SIZE) + mov x2, #0 +clear_loop: + str x2, [x0] + add x0, x0, #8 + cmp x0, x1 + b.lo clear_loop + ret +ENDPROC(fsl_clear_ocram) + +ENTRY(fsl_ocram_clear_ecc_err) + /* OCRAM1/2 ECC status bit */ + mov w1, #0x60 + ldr x0, =DCSR_DCFG_SBEESR2 + str w1, [x0] + ldr x0, =DCSR_DCFG_MBEESR2 + str w1, [x0] + ret +ENDPROC(fsl_ocram_init) +#endif + #ifdef CONFIG_FSL_LSCH3 .globl get_svr get_svr: @@ -356,7 +463,8 @@ ENTRY(secondary_boot_func) #if defined(CONFIG_GICV3) gic_wait_for_interrupt_m x0 #elif defined(CONFIG_GICV2) - ldr x0, =GICC_BASE + bl get_gic_offset + mov x0, x1 gic_wait_for_interrupt_m x0, w1 #endif @@ -378,29 +486,29 @@ cpu_is_le: b.eq 1f #ifdef CONFIG_ARMV8_SWITCH_TO_EL1 - adr x3, secondary_switch_to_el1 - ldr x4, =ES_TO_AARCH64 + adr x4, secondary_switch_to_el1 + ldr x5, =ES_TO_AARCH64 #else - ldr x3, [x11] - ldr x4, =ES_TO_AARCH32 + ldr x4, [x11] + ldr x5, =ES_TO_AARCH32 #endif bl secondary_switch_to_el2 1: #ifdef CONFIG_ARMV8_SWITCH_TO_EL1 - adr x3, secondary_switch_to_el1 + adr x4, secondary_switch_to_el1 #else - ldr x3, [x11] + ldr x4, [x11] #endif - ldr x4, =ES_TO_AARCH64 + ldr x5, =ES_TO_AARCH64 bl secondary_switch_to_el2 ENDPROC(secondary_boot_func) ENTRY(secondary_switch_to_el2) - switch_el x5, 1f, 0f, 0f + switch_el x6, 1f, 0f, 0f 0: ret -1: armv8_switch_to_el2_m x3, x4, x5 +1: armv8_switch_to_el2_m x4, x5, x6 ENDPROC(secondary_switch_to_el2) ENTRY(secondary_switch_to_el1) @@ -414,22 +522,22 @@ ENTRY(secondary_switch_to_el1) /* physical address of this cpus spin table element */ add x11, x1, x0 - ldr x3, [x11] + ldr x4, [x11] ldr x5, [x11, #24] ldr x6, =IH_ARCH_DEFAULT cmp x6, x5 b.eq 2f - ldr x4, =ES_TO_AARCH32 + ldr x5, =ES_TO_AARCH32 bl switch_to_el1 -2: ldr x4, =ES_TO_AARCH64 +2: ldr x5, =ES_TO_AARCH64 switch_to_el1: - switch_el x5, 0f, 1f, 0f + switch_el x6, 0f, 1f, 0f 0: ret -1: armv8_switch_to_el1_m x3, x4, x5 +1: armv8_switch_to_el1_m x4, x5, x6 ENDPROC(secondary_switch_to_el1) /* Ensure that the literals used by the secondary boot code are |