summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/cpu/armv7/mx7ulp/Makefile8
-rw-r--r--arch/arm/cpu/armv7/mx7ulp/iomux.c70
-rw-r--r--arch/arm/include/asm/arch-mx7ulp/iomux.h95
3 files changed, 173 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv7/mx7ulp/Makefile b/arch/arm/cpu/armv7/mx7ulp/Makefile
new file mode 100644
index 0000000..be038e7
--- /dev/null
+++ b/arch/arm/cpu/armv7/mx7ulp/Makefile
@@ -0,0 +1,8 @@
+#
+# (C) Copyright 2016 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+#
+
+obj-y := iomux.o
diff --git a/arch/arm/cpu/armv7/mx7ulp/iomux.c b/arch/arm/cpu/armv7/mx7ulp/iomux.c
new file mode 100644
index 0000000..1eba24e
--- /dev/null
+++ b/arch/arm/cpu/armv7/mx7ulp/iomux.c
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux.h>
+
+static void *base = (void *)IOMUXC_BASE_ADDR;
+
+/*
+ * iomuxc0 base address. In imx7ulp-pins.h,
+ * the offsets of pins in iomuxc0 are from 0xD000,
+ * so we set the base address to (0x4103D000 - 0xD000 = 0x41030000)
+ */
+static void *base_mports = (void *)(AIPS0_BASE + 0x30000);
+
+/*
+ * configures a single pad in the iomuxer
+ */
+void mx7ulp_iomux_setup_pad(iomux_cfg_t pad)
+{
+ u32 mux_ctrl_ofs = (pad & MUX_CTRL_OFS_MASK) >> MUX_CTRL_OFS_SHIFT;
+ u32 mux_mode = (pad & MUX_MODE_MASK) >> MUX_MODE_SHIFT;
+ u32 sel_input_ofs =
+ (pad & MUX_SEL_INPUT_OFS_MASK) >> MUX_SEL_INPUT_OFS_SHIFT;
+ u32 sel_input =
+ (pad & MUX_SEL_INPUT_MASK) >> MUX_SEL_INPUT_SHIFT;
+ u32 pad_ctrl_ofs = mux_ctrl_ofs;
+ u32 pad_ctrl = (pad & MUX_PAD_CTRL_MASK) >> MUX_PAD_CTRL_SHIFT;
+
+ debug("[PAD CFG] = 0x%16llX \r\n\tmux_ctl = 0x%X(0x%X) sel_input = 0x%X(0x%X) pad_ctrl = 0x%X(0x%X)\r\n",
+ pad, mux_ctrl_ofs, mux_mode, sel_input_ofs, sel_input,
+ pad_ctrl_ofs, pad_ctrl);
+
+ if (mux_mode & IOMUX_CONFIG_MPORTS) {
+ mux_mode &= ~IOMUX_CONFIG_MPORTS;
+ base = base_mports;
+ } else {
+ base = (void *)IOMUXC_BASE_ADDR;
+ }
+
+ __raw_writel(((mux_mode << IOMUXC_PCR_MUX_ALT_SHIFT) &
+ IOMUXC_PCR_MUX_ALT_MASK), base + mux_ctrl_ofs);
+
+ if (sel_input_ofs)
+ __raw_writel((sel_input << IOMUXC_PSMI_IMUX_ALT_SHIFT),
+ base + sel_input_ofs);
+
+ if (!(pad_ctrl & NO_PAD_CTRL))
+ __raw_writel(((mux_mode << IOMUXC_PCR_MUX_ALT_SHIFT) &
+ IOMUXC_PCR_MUX_ALT_MASK) |
+ (pad_ctrl & (~IOMUXC_PCR_MUX_ALT_MASK)),
+ base + pad_ctrl_ofs);
+}
+
+/* configures a list of pads within declared with IOMUX_PADS macro */
+void mx7ulp_iomux_setup_multiple_pads(iomux_cfg_t const *pad_list,
+ unsigned count)
+{
+ iomux_cfg_t const *p = pad_list;
+ int i;
+
+ for (i = 0; i < count; i++) {
+ mx7ulp_iomux_setup_pad(*p);
+ p++;
+ }
+}
diff --git a/arch/arm/include/asm/arch-mx7ulp/iomux.h b/arch/arm/include/asm/arch-mx7ulp/iomux.h
new file mode 100644
index 0000000..a2307db
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx7ulp/iomux.h
@@ -0,0 +1,95 @@
+/*
+ * Based on Linux i.MX iomux-v3.h file:
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ * <armlinux@phytec.de>
+ *
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __MACH_IOMUX_H__
+#define __MACH_IOMUX_H__
+
+/*
+ * build IOMUX_PAD structure
+ *
+ * This iomux scheme is based around pads, which are the physical balls
+ * on the processor.
+ *
+ * - Each pad has a pad control register (IOMUXC_SW_PAD_CTRL_x) which controls
+ * things like driving strength and pullup/pulldown.
+ * - Each pad can have but not necessarily does have an output routing register
+ * (IOMUXC_SW_MUX_CTL_PAD_x).
+ * - Each pad can have but not necessarily does have an input routing register
+ * (IOMUXC_x_SELECT_INPUT)
+ *
+ * The three register sets do not have a fixed offset to each other,
+ * hence we order this table by pad control registers (which all pads
+ * have) and put the optional i/o routing registers into additional
+ * fields.
+ *
+ * The naming convention for the pad modes is SOC_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
+ *
+ * IOMUX/PAD Bit field definitions
+ *
+ * MUX_CTRL_OFS: 0..15 (16)
+ * SEL_INPUT_OFS: 16..31 (16)
+ * MUX_MODE: 32..37 (6)
+ * SEL_INP: 38..41 (4)
+ * PAD_CTRL + NO_PAD_CTRL: 42..60 (19)
+ * reserved: 61-63 (3)
+*/
+
+typedef u64 iomux_cfg_t;
+
+#define MUX_CTRL_OFS_SHIFT 0
+#define MUX_CTRL_OFS_MASK ((iomux_cfg_t)0xffff << MUX_CTRL_OFS_SHIFT)
+#define MUX_SEL_INPUT_OFS_SHIFT 16
+#define MUX_SEL_INPUT_OFS_MASK ((iomux_cfg_t)0xffff << \
+ MUX_SEL_INPUT_OFS_SHIFT)
+
+#define MUX_MODE_SHIFT 32
+#define MUX_MODE_MASK ((iomux_cfg_t)0x3f << MUX_MODE_SHIFT)
+#define MUX_SEL_INPUT_SHIFT 38
+#define MUX_SEL_INPUT_MASK ((iomux_cfg_t)0xf << MUX_SEL_INPUT_SHIFT)
+#define MUX_PAD_CTRL_SHIFT 42
+#define MUX_PAD_CTRL_MASK ((iomux_cfg_t)0x7ffff << MUX_PAD_CTRL_SHIFT)
+
+#define MUX_PAD_CTRL(x) ((iomux_cfg_t)(x) << MUX_PAD_CTRL_SHIFT)
+
+#define IOMUX_PAD(pad_ctrl_ofs, mux_ctrl_ofs, mux_mode, sel_input_ofs, \
+ sel_input, pad_ctrl) \
+ (((iomux_cfg_t)(mux_ctrl_ofs) << MUX_CTRL_OFS_SHIFT) | \
+ ((iomux_cfg_t)(mux_mode) << MUX_MODE_SHIFT) | \
+ ((iomux_cfg_t)(pad_ctrl) << MUX_PAD_CTRL_SHIFT) | \
+ ((iomux_cfg_t)(sel_input_ofs) << MUX_SEL_INPUT_OFS_SHIFT)| \
+ ((iomux_cfg_t)(sel_input) << MUX_SEL_INPUT_SHIFT))
+
+#define NEW_PAD_CTRL(cfg, pad) (((cfg) & ~MUX_PAD_CTRL_MASK) | \
+ MUX_PAD_CTRL(pad))
+
+
+#define IOMUX_CONFIG_MPORTS 0x20
+#define MUX_MODE_MPORTS ((iomux_v3_cfg_t)IOMUX_CONFIG_MPORTS << \
+ MUX_MODE_SHIFT)
+
+/* Bit definition below needs to be fixed acccording to ulp rm */
+
+#define NO_PAD_CTRL (1 << 18)
+#define PAD_CTL_OBE_ENABLE (1 << 17)
+#define PAD_CTL_IBE_ENABLE (1 << 16)
+#define PAD_CTL_DSE (1 << 6)
+#define PAD_CTL_ODE (1 << 5)
+#define PAD_CTL_SRE_FAST (0 << 2)
+#define PAD_CTL_SRE_SLOW (1 << 2)
+#define PAD_CTL_PUE (1 << 1)
+#define PAD_CTL_PUS_UP ((1 << 0) | PAD_CTL_PUE)
+#define PAD_CTL_PUS_DOWN ((0 << 0) | PAD_CTL_PUE)
+
+
+void mx7ulp_iomux_setup_pad(iomux_cfg_t pad);
+void mx7ulp_iomux_setup_multiple_pads(iomux_cfg_t const *pad_list,
+ unsigned count);
+#endif /* __MACH_IOMUX_H__*/