summaryrefslogtreecommitdiff
path: root/arch/ppc/cpu/ppc4xx
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/cpu/ppc4xx')
-rw-r--r--arch/ppc/cpu/ppc4xx/40x_spd_sdram.c464
-rw-r--r--arch/ppc/cpu/ppc4xx/44x_spd_ddr.c1248
-rw-r--r--arch/ppc/cpu/ppc4xx/44x_spd_ddr2.c3174
-rw-r--r--arch/ppc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c1251
-rw-r--r--arch/ppc/cpu/ppc4xx/4xx_pci.c873
-rw-r--r--arch/ppc/cpu/ppc4xx/4xx_pcie.c1298
-rw-r--r--arch/ppc/cpu/ppc4xx/4xx_uart.c878
-rw-r--r--arch/ppc/cpu/ppc4xx/Makefile92
-rw-r--r--arch/ppc/cpu/ppc4xx/bedbug_405.c308
-rw-r--r--arch/ppc/cpu/ppc4xx/cache.S235
-rw-r--r--arch/ppc/cpu/ppc4xx/cmd_chip_config.c148
-rw-r--r--arch/ppc/cpu/ppc4xx/commproc.c77
-rw-r--r--arch/ppc/cpu/ppc4xx/config.mk37
-rw-r--r--arch/ppc/cpu/ppc4xx/cpu.c754
-rw-r--r--arch/ppc/cpu/ppc4xx/cpu_init.c456
-rw-r--r--arch/ppc/cpu/ppc4xx/dcr.S198
-rw-r--r--arch/ppc/cpu/ppc4xx/denali_data_eye.c389
-rw-r--r--arch/ppc/cpu/ppc4xx/denali_spd_ddr2.c1256
-rw-r--r--arch/ppc/cpu/ppc4xx/ecc.c185
-rw-r--r--arch/ppc/cpu/ppc4xx/ecc.h75
-rw-r--r--arch/ppc/cpu/ppc4xx/fdt.c177
-rw-r--r--arch/ppc/cpu/ppc4xx/gpio.c255
-rw-r--r--arch/ppc/cpu/ppc4xx/interrupts.c216
-rw-r--r--arch/ppc/cpu/ppc4xx/iop480_uart.c237
-rw-r--r--arch/ppc/cpu/ppc4xx/kgdb.S78
-rw-r--r--arch/ppc/cpu/ppc4xx/miiphy.c366
-rw-r--r--arch/ppc/cpu/ppc4xx/reginfo.c370
-rw-r--r--arch/ppc/cpu/ppc4xx/resetvec.S12
-rw-r--r--arch/ppc/cpu/ppc4xx/sdram.c468
-rw-r--r--arch/ppc/cpu/ppc4xx/sdram.h76
-rw-r--r--arch/ppc/cpu/ppc4xx/speed.c1177
-rw-r--r--arch/ppc/cpu/ppc4xx/start.S2170
-rw-r--r--arch/ppc/cpu/ppc4xx/tlb.c352
-rw-r--r--arch/ppc/cpu/ppc4xx/traps.c409
-rw-r--r--arch/ppc/cpu/ppc4xx/u-boot.lds169
-rw-r--r--arch/ppc/cpu/ppc4xx/uic.c180
-rw-r--r--arch/ppc/cpu/ppc4xx/usb.c66
-rw-r--r--arch/ppc/cpu/ppc4xx/usb_ohci.c1648
-rw-r--r--arch/ppc/cpu/ppc4xx/usb_ohci.h410
-rw-r--r--arch/ppc/cpu/ppc4xx/usbdev.c230
-rw-r--r--arch/ppc/cpu/ppc4xx/usbdev.h31
-rw-r--r--arch/ppc/cpu/ppc4xx/xilinx_irq.c100
42 files changed, 22593 insertions, 0 deletions
diff --git a/arch/ppc/cpu/ppc4xx/40x_spd_sdram.c b/arch/ppc/cpu/ppc4xx/40x_spd_sdram.c
new file mode 100644
index 0000000..595d568
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/40x_spd_sdram.c
@@ -0,0 +1,464 @@
+/*
+ * arch/ppc/cpu/ppc4xx/40x_spd_sdram.c
+ * This SPD SDRAM detection code supports IBM/AMCC PPC44x cpu with a
+ * SDRAM controller. Those are all current 405 PPC's.
+ *
+ * (C) Copyright 2001
+ * Bill Hunter, Wave 7 Optics, williamhunter@attbi.com
+ *
+ * Based on code by:
+ *
+ * Kenneth Johansson ,Ericsson AB.
+ * kenneth.johansson@etx.ericsson.se
+ *
+ * hacked up by bill hunter. fixed so we could run before
+ * serial_init and console_init. previous version avoided this by
+ * running out of cache memory during serial/console init, then running
+ * this code later.
+ *
+ * (C) Copyright 2002
+ * Jun Gu, Artesyn Technology, jung@artesyncp.com
+ * Support for AMCC 440 based on OpenBIOS draminit.c from IBM.
+ *
+ * (C) Copyright 2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <i2c.h>
+#include <ppc4xx.h>
+
+#if defined(CONFIG_SPD_EEPROM) && !defined(CONFIG_440)
+
+/*
+ * Set default values
+ */
+#ifndef CONFIG_SYS_I2C_SPEED
+#define CONFIG_SYS_I2C_SPEED 50000
+#endif
+
+#define ONE_BILLION 1000000000
+
+#define SDRAM0_CFG_DCE 0x80000000
+#define SDRAM0_CFG_SRE 0x40000000
+#define SDRAM0_CFG_PME 0x20000000
+#define SDRAM0_CFG_MEMCHK 0x10000000
+#define SDRAM0_CFG_REGEN 0x08000000
+#define SDRAM0_CFG_ECCDD 0x00400000
+#define SDRAM0_CFG_EMDULR 0x00200000
+#define SDRAM0_CFG_DRW_SHIFT (31-6)
+#define SDRAM0_CFG_BRPF_SHIFT (31-8)
+
+#define SDRAM0_TR_CASL_SHIFT (31-8)
+#define SDRAM0_TR_PTA_SHIFT (31-13)
+#define SDRAM0_TR_CTP_SHIFT (31-15)
+#define SDRAM0_TR_LDF_SHIFT (31-17)
+#define SDRAM0_TR_RFTA_SHIFT (31-29)
+#define SDRAM0_TR_RCD_SHIFT (31-31)
+
+#define SDRAM0_RTR_SHIFT (31-15)
+#define SDRAM0_ECCCFG_SHIFT (31-11)
+
+/* SDRAM0_CFG enable macro */
+#define SDRAM0_CFG_BRPF(x) ( ( x & 0x3)<< SDRAM0_CFG_BRPF_SHIFT )
+
+#define SDRAM0_BXCR_SZ_MASK 0x000e0000
+#define SDRAM0_BXCR_AM_MASK 0x0000e000
+
+#define SDRAM0_BXCR_SZ_SHIFT (31-14)
+#define SDRAM0_BXCR_AM_SHIFT (31-18)
+
+#define SDRAM0_BXCR_SZ(x) ( (( x << SDRAM0_BXCR_SZ_SHIFT) & SDRAM0_BXCR_SZ_MASK) )
+#define SDRAM0_BXCR_AM(x) ( (( x << SDRAM0_BXCR_AM_SHIFT) & SDRAM0_BXCR_AM_MASK) )
+
+#ifdef CONFIG_SPDDRAM_SILENT
+# define SPD_ERR(x) do { return 0; } while (0)
+#else
+# define SPD_ERR(x) do { printf(x); return(0); } while (0)
+#endif
+
+#define sdram_HZ_to_ns(hertz) (1000000000/(hertz))
+
+/* function prototypes */
+int spd_read(uint addr);
+
+
+/*
+ * This function is reading data from the DIMM module EEPROM over the SPD bus
+ * and uses that to program the sdram controller.
+ *
+ * This works on boards that has the same schematics that the AMCC walnut has.
+ *
+ * Input: null for default I2C spd functions or a pointer to a custom function
+ * returning spd_data.
+ */
+
+long int spd_sdram(int(read_spd)(uint addr))
+{
+ int tmp,row,col;
+ int total_size,bank_size,bank_code;
+ int ecc_on;
+ int mode;
+ int bank_cnt;
+
+ int sdram0_pmit=0x07c00000;
+#ifndef CONFIG_405EP /* not on PPC405EP */
+ int sdram0_besr0 = -1;
+ int sdram0_besr1 = -1;
+ int sdram0_eccesr = -1;
+#endif
+ int sdram0_ecccfg;
+
+ int sdram0_rtr=0;
+ int sdram0_tr=0;
+
+ int sdram0_b0cr;
+ int sdram0_b1cr;
+ int sdram0_b2cr;
+ int sdram0_b3cr;
+
+ int sdram0_cfg=0;
+
+ int t_rp;
+ int t_rcd;
+ int t_ras;
+ int t_rc;
+ int min_cas;
+
+ PPC4xx_SYS_INFO sys_info;
+ unsigned long bus_period_x_10;
+
+ /*
+ * get the board info
+ */
+ get_sys_info(&sys_info);
+ bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
+
+ if (read_spd == 0){
+ read_spd=spd_read;
+ /*
+ * Make sure I2C controller is initialized
+ * before continuing.
+ */
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ }
+
+ /* Make shure we are using SDRAM */
+ if (read_spd(2) != 0x04) {
+ SPD_ERR("SDRAM - non SDRAM memory module found\n");
+ }
+
+ /* ------------------------------------------------------------------
+ * configure memory timing register
+ *
+ * data from DIMM:
+ * 27 IN Row Precharge Time ( t RP)
+ * 29 MIN RAS to CAS Delay ( t RCD)
+ * 127 Component and Clock Detail ,clk0-clk3, junction temp, CAS
+ * -------------------------------------------------------------------*/
+
+ /*
+ * first figure out which cas latency mode to use
+ * use the min supported mode
+ */
+
+ tmp = read_spd(127) & 0x6;
+ if (tmp == 0x02) { /* only cas = 2 supported */
+ min_cas = 2;
+/* t_ck = read_spd(9); */
+/* t_ac = read_spd(10); */
+ } else if (tmp == 0x04) { /* only cas = 3 supported */
+ min_cas = 3;
+/* t_ck = read_spd(9); */
+/* t_ac = read_spd(10); */
+ } else if (tmp == 0x06) { /* 2,3 supported, so use 2 */
+ min_cas = 2;
+/* t_ck = read_spd(23); */
+/* t_ac = read_spd(24); */
+ } else {
+ SPD_ERR("SDRAM - unsupported CAS latency \n");
+ }
+
+ /* get some timing values, t_rp,t_rcd,t_ras,t_rc
+ */
+ t_rp = read_spd(27);
+ t_rcd = read_spd(29);
+ t_ras = read_spd(30);
+ t_rc = t_ras + t_rp;
+
+ /* The following timing calcs subtract 1 before deviding.
+ * this has effect of using ceiling instead of floor rounding,
+ * and also subtracting 1 to convert number to reg value
+ */
+ /* set up CASL */
+ sdram0_tr = (min_cas - 1) << SDRAM0_TR_CASL_SHIFT;
+ /* set up PTA */
+ sdram0_tr |= ((((t_rp - 1) * 10)/bus_period_x_10) & 0x3) << SDRAM0_TR_PTA_SHIFT;
+ /* set up CTP */
+ tmp = (((t_rc - t_rcd - t_rp -1) * 10) / bus_period_x_10) & 0x3;
+ if (tmp < 1)
+ tmp = 1;
+ sdram0_tr |= tmp << SDRAM0_TR_CTP_SHIFT;
+ /* set LDF = 2 cycles, reg value = 1 */
+ sdram0_tr |= 1 << SDRAM0_TR_LDF_SHIFT;
+ /* set RFTA = t_rfc/bus_period, use t_rfc = t_rc */
+ tmp = (((t_rc - 1) * 10) / bus_period_x_10) - 3;
+ if (tmp < 0)
+ tmp = 0;
+ if (tmp > 6)
+ tmp = 6;
+ sdram0_tr |= tmp << SDRAM0_TR_RFTA_SHIFT;
+ /* set RCD = t_rcd/bus_period*/
+ sdram0_tr |= ((((t_rcd - 1) * 10) / bus_period_x_10) &0x3) << SDRAM0_TR_RCD_SHIFT ;
+
+
+ /*------------------------------------------------------------------
+ * configure RTR register
+ * -------------------------------------------------------------------*/
+ row = read_spd(3);
+ col = read_spd(4);
+ tmp = read_spd(12) & 0x7f ; /* refresh type less self refresh bit */
+ switch (tmp) {
+ case 0x00:
+ tmp = 15625;
+ break;
+ case 0x01:
+ tmp = 15625 / 4;
+ break;
+ case 0x02:
+ tmp = 15625 / 2;
+ break;
+ case 0x03:
+ tmp = 15625 * 2;
+ break;
+ case 0x04:
+ tmp = 15625 * 4;
+ break;
+ case 0x05:
+ tmp = 15625 * 8;
+ break;
+ default:
+ SPD_ERR("SDRAM - Bad refresh period \n");
+ }
+ /* convert from nsec to bus cycles */
+ tmp = (tmp * 10) / bus_period_x_10;
+ sdram0_rtr = (tmp & 0x3ff8) << SDRAM0_RTR_SHIFT;
+
+ /*------------------------------------------------------------------
+ * determine the number of banks used
+ * -------------------------------------------------------------------*/
+ /* byte 7:6 is module data width */
+ if (read_spd(7) != 0)
+ SPD_ERR("SDRAM - unsupported module width\n");
+ tmp = read_spd(6);
+ if (tmp < 32)
+ SPD_ERR("SDRAM - unsupported module width\n");
+ else if (tmp < 64)
+ bank_cnt = 1; /* one bank per sdram side */
+ else if (tmp < 73)
+ bank_cnt = 2; /* need two banks per side */
+ else if (tmp < 161)
+ bank_cnt = 4; /* need four banks per side */
+ else
+ SPD_ERR("SDRAM - unsupported module width\n");
+
+ /* byte 5 is the module row count (refered to as dimm "sides") */
+ tmp = read_spd(5);
+ if (tmp == 1)
+ ;
+ else if (tmp==2)
+ bank_cnt *= 2;
+ else if (tmp==4)
+ bank_cnt *= 4;
+ else
+ bank_cnt = 8; /* 8 is an error code */
+
+ if (bank_cnt > 4) /* we only have 4 banks to work with */
+ SPD_ERR("SDRAM - unsupported module rows for this width\n");
+
+ /* now check for ECC ability of module. We only support ECC
+ * on 32 bit wide devices with 8 bit ECC.
+ */
+ if ((read_spd(11)==2) && (read_spd(6)==40) && (read_spd(14)==8)) {
+ sdram0_ecccfg = 0xf << SDRAM0_ECCCFG_SHIFT;
+ ecc_on = 1;
+ } else {
+ sdram0_ecccfg = 0;
+ ecc_on = 0;
+ }
+
+ /*------------------------------------------------------------------
+ * calculate total size
+ * -------------------------------------------------------------------*/
+ /* calculate total size and do sanity check */
+ tmp = read_spd(31);
+ total_size = 1 << 22; /* total_size = 4MB */
+ /* now multiply 4M by the smallest device row density */
+ /* note that we don't support asymetric rows */
+ while (((tmp & 0x0001) == 0) && (tmp != 0)) {
+ total_size = total_size << 1;
+ tmp = tmp >> 1;
+ }
+ total_size *= read_spd(5); /* mult by module rows (dimm sides) */
+
+ /*------------------------------------------------------------------
+ * map rows * cols * banks to a mode
+ * -------------------------------------------------------------------*/
+
+ switch (row) {
+ case 11:
+ switch (col) {
+ case 8:
+ mode=4; /* mode 5 */
+ break;
+ case 9:
+ case 10:
+ mode=0; /* mode 1 */
+ break;
+ default:
+ SPD_ERR("SDRAM - unsupported mode\n");
+ }
+ break;
+ case 12:
+ switch (col) {
+ case 8:
+ mode=3; /* mode 4 */
+ break;
+ case 9:
+ case 10:
+ mode=1; /* mode 2 */
+ break;
+ default:
+ SPD_ERR("SDRAM - unsupported mode\n");
+ }
+ break;
+ case 13:
+ switch (col) {
+ case 8:
+ mode=5; /* mode 6 */
+ break;
+ case 9:
+ case 10:
+ if (read_spd(17) == 2)
+ mode = 6; /* mode 7 */
+ else
+ mode = 2; /* mode 3 */
+ break;
+ case 11:
+ mode = 2; /* mode 3 */
+ break;
+ default:
+ SPD_ERR("SDRAM - unsupported mode\n");
+ }
+ break;
+ default:
+ SPD_ERR("SDRAM - unsupported mode\n");
+ }
+
+ /*------------------------------------------------------------------
+ * using the calculated values, compute the bank
+ * config register values.
+ * -------------------------------------------------------------------*/
+ sdram0_b1cr = 0;
+ sdram0_b2cr = 0;
+ sdram0_b3cr = 0;
+
+ /* compute the size of each bank */
+ bank_size = total_size / bank_cnt;
+ /* convert bank size to bank size code for ppc4xx
+ by takeing log2(bank_size) - 22 */
+ tmp = bank_size; /* start with tmp = bank_size */
+ bank_code = 0; /* and bank_code = 0 */
+ while (tmp > 1) { /* this takes log2 of tmp */
+ bank_code++; /* and stores result in bank_code */
+ tmp = tmp >> 1;
+ } /* bank_code is now log2(bank_size) */
+ bank_code -= 22; /* subtract 22 to get the code */
+
+ tmp = SDRAM0_BXCR_SZ(bank_code) | SDRAM0_BXCR_AM(mode) | 1;
+ sdram0_b0cr = (bank_size * 0) | tmp;
+#ifndef CONFIG_405EP /* not on PPC405EP */
+ if (bank_cnt > 1)
+ sdram0_b2cr = (bank_size * 1) | tmp;
+ if (bank_cnt > 2)
+ sdram0_b1cr = (bank_size * 2) | tmp;
+ if (bank_cnt > 3)
+ sdram0_b3cr = (bank_size * 3) | tmp;
+#else
+ /* PPC405EP chip only supports two SDRAM banks */
+ if (bank_cnt > 1)
+ sdram0_b1cr = (bank_size * 1) | tmp;
+ if (bank_cnt > 2)
+ total_size = 2 * bank_size;
+#endif
+
+ /*
+ * enable sdram controller DCE=1
+ * enable burst read prefetch to 32 bytes BRPF=2
+ * leave other functions off
+ */
+
+ /*------------------------------------------------------------------
+ * now that we've done our calculations, we are ready to
+ * program all the registers.
+ * -------------------------------------------------------------------*/
+
+ /* disable memcontroller so updates work */
+ mtsdram(SDRAM0_CFG, 0);
+
+#ifndef CONFIG_405EP /* not on PPC405EP */
+ mtsdram(SDRAM0_BESR0, sdram0_besr0);
+ mtsdram(SDRAM0_BESR1, sdram0_besr1);
+ mtsdram(SDRAM0_ECCCFG, sdram0_ecccfg);
+ mtsdram(SDRAM0_ECCESR, sdram0_eccesr);
+#endif
+ mtsdram(SDRAM0_RTR, sdram0_rtr);
+ mtsdram(SDRAM0_PMIT, sdram0_pmit);
+ mtsdram(SDRAM0_B0CR, sdram0_b0cr);
+ mtsdram(SDRAM0_B1CR, sdram0_b1cr);
+#ifndef CONFIG_405EP /* not on PPC405EP */
+ mtsdram(SDRAM0_B2CR, sdram0_b2cr);
+ mtsdram(SDRAM0_B3CR, sdram0_b3cr);
+#endif
+ mtsdram(SDRAM0_TR, sdram0_tr);
+
+ /* SDRAM have a power on delay, 500 micro should do */
+ udelay(500);
+ sdram0_cfg = SDRAM0_CFG_DCE | SDRAM0_CFG_BRPF(1) | SDRAM0_CFG_ECCDD | SDRAM0_CFG_EMDULR;
+ if (ecc_on)
+ sdram0_cfg |= SDRAM0_CFG_MEMCHK;
+ mtsdram(SDRAM0_CFG, sdram0_cfg);
+
+ return (total_size);
+}
+
+int spd_read(uint addr)
+{
+ uchar data[2];
+
+ if (i2c_read(SPD_EEPROM_ADDRESS, addr, 1, data, 1) == 0)
+ return (int)data[0];
+ else
+ return 0;
+}
+
+#endif /* CONFIG_SPD_EEPROM */
diff --git a/arch/ppc/cpu/ppc4xx/44x_spd_ddr.c b/arch/ppc/cpu/ppc4xx/44x_spd_ddr.c
new file mode 100644
index 0000000..9d1994f
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/44x_spd_ddr.c
@@ -0,0 +1,1248 @@
+/*
+ * arch/ppc/cpu/ppc4xx/44x_spd_ddr.c
+ * This SPD DDR detection code supports IBM/AMCC PPC44x cpu with a
+ * DDR controller. Those are 440GP/GX/EP/GR.
+ *
+ * (C) Copyright 2001
+ * Bill Hunter, Wave 7 Optics, williamhunter@attbi.com
+ *
+ * Based on code by:
+ *
+ * Kenneth Johansson ,Ericsson AB.
+ * kenneth.johansson@etx.ericsson.se
+ *
+ * hacked up by bill hunter. fixed so we could run before
+ * serial_init and console_init. previous version avoided this by
+ * running out of cache memory during serial/console init, then running
+ * this code later.
+ *
+ * (C) Copyright 2002
+ * Jun Gu, Artesyn Technology, jung@artesyncp.com
+ * Support for AMCC 440 based on OpenBIOS draminit.c from IBM.
+ *
+ * (C) Copyright 2005-2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* define DEBUG for debugging output (obviously ;-)) */
+#if 0
+#define DEBUG
+#endif
+
+#include <common.h>
+#include <asm/processor.h>
+#include <i2c.h>
+#include <ppc4xx.h>
+#include <asm/mmu.h>
+
+#include "ecc.h"
+
+#if defined(CONFIG_SPD_EEPROM) && \
+ (defined(CONFIG_440GP) || defined(CONFIG_440GX) || \
+ defined(CONFIG_440EP) || defined(CONFIG_440GR))
+
+/*
+ * Set default values
+ */
+#ifndef CONFIG_SYS_I2C_SPEED
+#define CONFIG_SYS_I2C_SPEED 50000
+#endif
+
+#define ONE_BILLION 1000000000
+
+/*
+ * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed
+ */
+void __spd_ddr_init_hang (void)
+{
+ hang ();
+}
+void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang")));
+
+/*-----------------------------------------------------------------------------+
+ | General Definition
+ +-----------------------------------------------------------------------------*/
+#define DEFAULT_SPD_ADDR1 0x53
+#define DEFAULT_SPD_ADDR2 0x52
+#define MAXBANKS 4 /* at most 4 dimm banks */
+#define MAX_SPD_BYTES 256
+#define NUMHALFCYCLES 4
+#define NUMMEMTESTS 8
+#define NUMMEMWORDS 8
+#define MAXBXCR 4
+#define TRUE 1
+#define FALSE 0
+
+/*
+ * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
+ * region. Right now the cache should still be disabled in U-Boot because of the
+ * EMAC driver, that need it's buffer descriptor to be located in non cached
+ * memory.
+ *
+ * If at some time this restriction doesn't apply anymore, just define
+ * CONFIG_4xx_DCACHE in the board config file and this code should setup
+ * everything correctly.
+ */
+#ifdef CONFIG_4xx_DCACHE
+#define MY_TLB_WORD2_I_ENABLE 0 /* enable caching on SDRAM */
+#else
+#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */
+#endif
+
+/* bank_parms is used to sort the bank sizes by descending order */
+struct bank_param {
+ unsigned long cr;
+ unsigned long bank_size_bytes;
+};
+
+typedef struct bank_param BANKPARMS;
+
+#ifdef CONFIG_SYS_SIMULATE_SPD_EEPROM
+extern const unsigned char cfg_simulate_spd_eeprom[128];
+#endif
+
+static unsigned char spd_read(uchar chip, uint addr);
+static void get_spd_info(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void check_mem_type(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void check_volt_type(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_cfg0(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_cfg1(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_rtr(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_tr0(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_tr1(void);
+
+static unsigned long program_bxcr(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+
+/*
+ * This function is reading data from the DIMM module EEPROM over the SPD bus
+ * and uses that to program the sdram controller.
+ *
+ * This works on boards that has the same schematics that the AMCC walnut has.
+ *
+ * BUG: Don't handle ECC memory
+ * BUG: A few values in the TR register is currently hardcoded
+ */
+long int spd_sdram(void) {
+ unsigned char iic0_dimm_addr[] = SPD_EEPROM_ADDRESS;
+ unsigned long dimm_populated[sizeof(iic0_dimm_addr)];
+ unsigned long total_size;
+ unsigned long cfg0;
+ unsigned long mcsts;
+ unsigned long num_dimm_banks; /* on board dimm banks */
+
+ num_dimm_banks = sizeof(iic0_dimm_addr);
+
+ /*
+ * Make sure I2C controller is initialized
+ * before continuing.
+ */
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+
+ /*
+ * Read the SPD information using I2C interface. Check to see if the
+ * DIMM slots are populated.
+ */
+ get_spd_info(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*
+ * Check the memory type for the dimms plugged.
+ */
+ check_mem_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*
+ * Check the voltage type for the dimms plugged.
+ */
+ check_volt_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
+ /*
+ * Soft-reset SDRAM controller.
+ */
+ mtsdr(SDR0_SRST, SDR0_SRST_DMC);
+ mtsdr(SDR0_SRST, 0x00000000);
+#endif
+
+ /*
+ * program 440GP SDRAM controller options (SDRAM0_CFG0)
+ */
+ program_cfg0(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*
+ * program 440GP SDRAM controller options (SDRAM0_CFG1)
+ */
+ program_cfg1(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*
+ * program SDRAM refresh register (SDRAM0_RTR)
+ */
+ program_rtr(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*
+ * program SDRAM Timing Register 0 (SDRAM0_TR0)
+ */
+ program_tr0(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*
+ * program the BxCR registers to find out total sdram installed
+ */
+ total_size = program_bxcr(dimm_populated, iic0_dimm_addr,
+ num_dimm_banks);
+
+#ifdef CONFIG_PROG_SDRAM_TLB /* this define should eventually be removed */
+ /* and program tlb entries for this size (dynamic) */
+ program_tlb(0, 0, total_size, MY_TLB_WORD2_I_ENABLE);
+#endif
+
+ /*
+ * program SDRAM Clock Timing Register (SDRAM0_CLKTR)
+ */
+ mtsdram(SDRAM0_CLKTR, 0x40000000);
+
+ /*
+ * delay to ensure 200 usec has elapsed
+ */
+ udelay(400);
+
+ /*
+ * enable the memory controller
+ */
+ mfsdram(SDRAM0_CFG0, cfg0);
+ mtsdram(SDRAM0_CFG0, cfg0 | SDRAM_CFG0_DCEN);
+
+ /*
+ * wait for SDRAM_CFG0_DC_EN to complete
+ */
+ while (1) {
+ mfsdram(SDRAM0_MCSTS, mcsts);
+ if ((mcsts & SDRAM_MCSTS_MRSC) != 0)
+ break;
+ }
+
+ /*
+ * program SDRAM Timing Register 1, adding some delays
+ */
+ program_tr1();
+
+#ifdef CONFIG_DDR_ECC
+ /*
+ * If ecc is enabled, initialize the parity bits.
+ */
+ ecc_init(CONFIG_SYS_SDRAM_BASE, total_size);
+#endif
+
+ return total_size;
+}
+
+static unsigned char spd_read(uchar chip, uint addr)
+{
+ unsigned char data[2];
+
+#ifdef CONFIG_SYS_SIMULATE_SPD_EEPROM
+ if (chip == CONFIG_SYS_SIMULATE_SPD_EEPROM) {
+ /*
+ * Onboard spd eeprom requested -> simulate values
+ */
+ return cfg_simulate_spd_eeprom[addr];
+ }
+#endif /* CONFIG_SYS_SIMULATE_SPD_EEPROM */
+
+ if (i2c_probe(chip) == 0) {
+ if (i2c_read(chip, addr, 1, data, 1) == 0) {
+ return data[0];
+ }
+ }
+
+ return 0;
+}
+
+static void get_spd_info(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long dimm_found;
+ unsigned char num_of_bytes;
+ unsigned char total_size;
+
+ dimm_found = FALSE;
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ num_of_bytes = 0;
+ total_size = 0;
+
+ num_of_bytes = spd_read(iic0_dimm_addr[dimm_num], 0);
+ total_size = spd_read(iic0_dimm_addr[dimm_num], 1);
+
+ if ((num_of_bytes != 0) && (total_size != 0)) {
+ dimm_populated[dimm_num] = TRUE;
+ dimm_found = TRUE;
+ debug("DIMM slot %lu: populated\n", dimm_num);
+ } else {
+ dimm_populated[dimm_num] = FALSE;
+ debug("DIMM slot %lu: Not populated\n", dimm_num);
+ }
+ }
+
+ if (dimm_found == FALSE) {
+ printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
+ spd_ddr_init_hang ();
+ }
+}
+
+static void check_mem_type(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned char dimm_type;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] == TRUE) {
+ dimm_type = spd_read(iic0_dimm_addr[dimm_num], 2);
+ switch (dimm_type) {
+ case 7:
+ debug("DIMM slot %lu: DDR SDRAM detected\n", dimm_num);
+ break;
+ default:
+ printf("ERROR: Unsupported DIMM detected in slot %lu.\n",
+ dimm_num);
+ printf("Only DDR SDRAM DIMMs are supported.\n");
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ spd_ddr_init_hang ();
+ break;
+ }
+ }
+ }
+}
+
+static void check_volt_type(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long voltage_type;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] == TRUE) {
+ voltage_type = spd_read(iic0_dimm_addr[dimm_num], 8);
+ if (voltage_type != 0x04) {
+ printf("ERROR: DIMM %lu with unsupported voltage level.\n",
+ dimm_num);
+ spd_ddr_init_hang ();
+ } else {
+ debug("DIMM %lu voltage level supported.\n", dimm_num);
+ }
+ break;
+ }
+ }
+}
+
+static void program_cfg0(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long cfg0;
+ unsigned long ecc_enabled;
+ unsigned char ecc;
+ unsigned char attributes;
+ unsigned long data_width;
+ unsigned long dimm_32bit;
+ unsigned long dimm_64bit;
+
+ /*
+ * get Memory Controller Options 0 data
+ */
+ mfsdram(SDRAM0_CFG0, cfg0);
+
+ /*
+ * clear bits
+ */
+ cfg0 &= ~(SDRAM_CFG0_DCEN | SDRAM_CFG0_MCHK_MASK |
+ SDRAM_CFG0_RDEN | SDRAM_CFG0_PMUD |
+ SDRAM_CFG0_DMWD_MASK |
+ SDRAM_CFG0_UIOS_MASK | SDRAM_CFG0_PDP);
+
+
+ /*
+ * FIXME: assume the DDR SDRAMs in both banks are the same
+ */
+ ecc_enabled = TRUE;
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] == TRUE) {
+ ecc = spd_read(iic0_dimm_addr[dimm_num], 11);
+ if (ecc != 0x02) {
+ ecc_enabled = FALSE;
+ }
+
+ /*
+ * program Registered DIMM Enable
+ */
+ attributes = spd_read(iic0_dimm_addr[dimm_num], 21);
+ if ((attributes & 0x02) != 0x00) {
+ cfg0 |= SDRAM_CFG0_RDEN;
+ }
+
+ /*
+ * program DDR SDRAM Data Width
+ */
+ data_width =
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num],6) +
+ (((unsigned long)spd_read(iic0_dimm_addr[dimm_num],7)) << 8);
+ if (data_width == 64 || data_width == 72) {
+ dimm_64bit = TRUE;
+ cfg0 |= SDRAM_CFG0_DMWD_64;
+ } else if (data_width == 32 || data_width == 40) {
+ dimm_32bit = TRUE;
+ cfg0 |= SDRAM_CFG0_DMWD_32;
+ } else {
+ printf("WARNING: DIMM with datawidth of %lu bits.\n",
+ data_width);
+ printf("Only DIMMs with 32 or 64 bit datawidths supported.\n");
+ spd_ddr_init_hang ();
+ }
+ break;
+ }
+ }
+
+ /*
+ * program Memory Data Error Checking
+ */
+ if (ecc_enabled == TRUE) {
+ cfg0 |= SDRAM_CFG0_MCHK_GEN;
+ } else {
+ cfg0 |= SDRAM_CFG0_MCHK_NON;
+ }
+
+ /*
+ * program Page Management Unit (0 == enabled)
+ */
+ cfg0 &= ~SDRAM_CFG0_PMUD;
+
+ /*
+ * program Memory Controller Options 0
+ * Note: DCEN must be enabled after all DDR SDRAM controller
+ * configuration registers get initialized.
+ */
+ mtsdram(SDRAM0_CFG0, cfg0);
+}
+
+static void program_cfg1(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long cfg1;
+ mfsdram(SDRAM0_CFG1, cfg1);
+
+ /*
+ * Self-refresh exit, disable PM
+ */
+ cfg1 &= ~(SDRAM_CFG1_SRE | SDRAM_CFG1_PMEN);
+
+ /*
+ * program Memory Controller Options 1
+ */
+ mtsdram(SDRAM0_CFG1, cfg1);
+}
+
+static void program_rtr(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long bus_period_x_10;
+ unsigned long refresh_rate = 0;
+ unsigned char refresh_rate_type;
+ unsigned long refresh_interval;
+ unsigned long sdram_rtr;
+ PPC4xx_SYS_INFO sys_info;
+
+ /*
+ * get the board info
+ */
+ get_sys_info(&sys_info);
+ bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] == TRUE) {
+ refresh_rate_type = 0x7F & spd_read(iic0_dimm_addr[dimm_num], 12);
+ switch (refresh_rate_type) {
+ case 0x00:
+ refresh_rate = 15625;
+ break;
+ case 0x01:
+ refresh_rate = 15625/4;
+ break;
+ case 0x02:
+ refresh_rate = 15625/2;
+ break;
+ case 0x03:
+ refresh_rate = 15626*2;
+ break;
+ case 0x04:
+ refresh_rate = 15625*4;
+ break;
+ case 0x05:
+ refresh_rate = 15625*8;
+ break;
+ default:
+ printf("ERROR: DIMM %lu, unsupported refresh rate/type.\n",
+ dimm_num);
+ printf("Replace the DIMM module with a supported DIMM.\n");
+ break;
+ }
+
+ break;
+ }
+ }
+
+ refresh_interval = refresh_rate * 10 / bus_period_x_10;
+ sdram_rtr = (refresh_interval & 0x3ff8) << 16;
+
+ /*
+ * program Refresh Timer Register (SDRAM0_RTR)
+ */
+ mtsdram(SDRAM0_RTR, sdram_rtr);
+}
+
+static void program_tr0(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long tr0;
+ unsigned char wcsbc;
+ unsigned char t_rp_ns;
+ unsigned char t_rcd_ns;
+ unsigned char t_ras_ns;
+ unsigned long t_rp_clk;
+ unsigned long t_ras_rcd_clk;
+ unsigned long t_rcd_clk;
+ unsigned long t_rfc_clk;
+ unsigned long plb_check;
+ unsigned char cas_bit;
+ unsigned long cas_index;
+ unsigned char cas_2_0_available;
+ unsigned char cas_2_5_available;
+ unsigned char cas_3_0_available;
+ unsigned long cycle_time_ns_x_10[3];
+ unsigned long tcyc_3_0_ns_x_10;
+ unsigned long tcyc_2_5_ns_x_10;
+ unsigned long tcyc_2_0_ns_x_10;
+ unsigned long tcyc_reg;
+ unsigned long bus_period_x_10;
+ PPC4xx_SYS_INFO sys_info;
+ unsigned long residue;
+
+ /*
+ * get the board info
+ */
+ get_sys_info(&sys_info);
+ bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
+
+ /*
+ * get SDRAM Timing Register 0 (SDRAM_TR0) and clear bits
+ */
+ mfsdram(SDRAM0_TR0, tr0);
+ tr0 &= ~(SDRAM_TR0_SDWR_MASK | SDRAM_TR0_SDWD_MASK |
+ SDRAM_TR0_SDCL_MASK | SDRAM_TR0_SDPA_MASK |
+ SDRAM_TR0_SDCP_MASK | SDRAM_TR0_SDLD_MASK |
+ SDRAM_TR0_SDRA_MASK | SDRAM_TR0_SDRD_MASK);
+
+ /*
+ * initialization
+ */
+ wcsbc = 0;
+ t_rp_ns = 0;
+ t_rcd_ns = 0;
+ t_ras_ns = 0;
+ cas_2_0_available = TRUE;
+ cas_2_5_available = TRUE;
+ cas_3_0_available = TRUE;
+ tcyc_2_0_ns_x_10 = 0;
+ tcyc_2_5_ns_x_10 = 0;
+ tcyc_3_0_ns_x_10 = 0;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] == TRUE) {
+ wcsbc = spd_read(iic0_dimm_addr[dimm_num], 15);
+ t_rp_ns = spd_read(iic0_dimm_addr[dimm_num], 27) >> 2;
+ t_rcd_ns = spd_read(iic0_dimm_addr[dimm_num], 29) >> 2;
+ t_ras_ns = spd_read(iic0_dimm_addr[dimm_num], 30);
+ cas_bit = spd_read(iic0_dimm_addr[dimm_num], 18);
+
+ for (cas_index = 0; cas_index < 3; cas_index++) {
+ switch (cas_index) {
+ case 0:
+ tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 9);
+ break;
+ case 1:
+ tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 23);
+ break;
+ default:
+ tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 25);
+ break;
+ }
+
+ if ((tcyc_reg & 0x0F) >= 10) {
+ printf("ERROR: Tcyc incorrect for DIMM in slot %lu\n",
+ dimm_num);
+ spd_ddr_init_hang ();
+ }
+
+ cycle_time_ns_x_10[cas_index] =
+ (((tcyc_reg & 0xF0) >> 4) * 10) + (tcyc_reg & 0x0F);
+ }
+
+ cas_index = 0;
+
+ if ((cas_bit & 0x80) != 0) {
+ cas_index += 3;
+ } else if ((cas_bit & 0x40) != 0) {
+ cas_index += 2;
+ } else if ((cas_bit & 0x20) != 0) {
+ cas_index += 1;
+ }
+
+ if (((cas_bit & 0x10) != 0) && (cas_index < 3)) {
+ tcyc_3_0_ns_x_10 = cycle_time_ns_x_10[cas_index];
+ cas_index++;
+ } else {
+ if (cas_index != 0) {
+ cas_index++;
+ }
+ cas_3_0_available = FALSE;
+ }
+
+ if (((cas_bit & 0x08) != 0) || (cas_index < 3)) {
+ tcyc_2_5_ns_x_10 = cycle_time_ns_x_10[cas_index];
+ cas_index++;
+ } else {
+ if (cas_index != 0) {
+ cas_index++;
+ }
+ cas_2_5_available = FALSE;
+ }
+
+ if (((cas_bit & 0x04) != 0) || (cas_index < 3)) {
+ tcyc_2_0_ns_x_10 = cycle_time_ns_x_10[cas_index];
+ cas_index++;
+ } else {
+ if (cas_index != 0) {
+ cas_index++;
+ }
+ cas_2_0_available = FALSE;
+ }
+
+ break;
+ }
+ }
+
+ /*
+ * Program SD_WR and SD_WCSBC fields
+ */
+ tr0 |= SDRAM_TR0_SDWR_2_CLK; /* Write Recovery: 2 CLK */
+ switch (wcsbc) {
+ case 0:
+ tr0 |= SDRAM_TR0_SDWD_0_CLK;
+ break;
+ default:
+ tr0 |= SDRAM_TR0_SDWD_1_CLK;
+ break;
+ }
+
+ /*
+ * Program SD_CASL field
+ */
+ if ((cas_2_0_available == TRUE) &&
+ (bus_period_x_10 >= tcyc_2_0_ns_x_10)) {
+ tr0 |= SDRAM_TR0_SDCL_2_0_CLK;
+ } else if ((cas_2_5_available == TRUE) &&
+ (bus_period_x_10 >= tcyc_2_5_ns_x_10)) {
+ tr0 |= SDRAM_TR0_SDCL_2_5_CLK;
+ } else if ((cas_3_0_available == TRUE) &&
+ (bus_period_x_10 >= tcyc_3_0_ns_x_10)) {
+ tr0 |= SDRAM_TR0_SDCL_3_0_CLK;
+ } else {
+ printf("ERROR: No supported CAS latency with the installed DIMMs.\n");
+ printf("Only CAS latencies of 2.0, 2.5, and 3.0 are supported.\n");
+ printf("Make sure the PLB speed is within the supported range.\n");
+ spd_ddr_init_hang ();
+ }
+
+ /*
+ * Calculate Trp in clock cycles and round up if necessary
+ * Program SD_PTA field
+ */
+ t_rp_clk = sys_info.freqPLB * t_rp_ns / ONE_BILLION;
+ plb_check = ONE_BILLION * t_rp_clk / t_rp_ns;
+ if (sys_info.freqPLB != plb_check) {
+ t_rp_clk++;
+ }
+ switch ((unsigned long)t_rp_clk) {
+ case 0:
+ case 1:
+ case 2:
+ tr0 |= SDRAM_TR0_SDPA_2_CLK;
+ break;
+ case 3:
+ tr0 |= SDRAM_TR0_SDPA_3_CLK;
+ break;
+ default:
+ tr0 |= SDRAM_TR0_SDPA_4_CLK;
+ break;
+ }
+
+ /*
+ * Program SD_CTP field
+ */
+ t_ras_rcd_clk = sys_info.freqPLB * (t_ras_ns - t_rcd_ns) / ONE_BILLION;
+ plb_check = ONE_BILLION * t_ras_rcd_clk / (t_ras_ns - t_rcd_ns);
+ if (sys_info.freqPLB != plb_check) {
+ t_ras_rcd_clk++;
+ }
+ switch (t_ras_rcd_clk) {
+ case 0:
+ case 1:
+ case 2:
+ tr0 |= SDRAM_TR0_SDCP_2_CLK;
+ break;
+ case 3:
+ tr0 |= SDRAM_TR0_SDCP_3_CLK;
+ break;
+ case 4:
+ tr0 |= SDRAM_TR0_SDCP_4_CLK;
+ break;
+ default:
+ tr0 |= SDRAM_TR0_SDCP_5_CLK;
+ break;
+ }
+
+ /*
+ * Program SD_LDF field
+ */
+ tr0 |= SDRAM_TR0_SDLD_2_CLK;
+
+ /*
+ * Program SD_RFTA field
+ * FIXME tRFC hardcoded as 75 nanoseconds
+ */
+ t_rfc_clk = sys_info.freqPLB / (ONE_BILLION / 75);
+ residue = sys_info.freqPLB % (ONE_BILLION / 75);
+ if (residue >= (ONE_BILLION / 150)) {
+ t_rfc_clk++;
+ }
+ switch (t_rfc_clk) {
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ case 5:
+ case 6:
+ tr0 |= SDRAM_TR0_SDRA_6_CLK;
+ break;
+ case 7:
+ tr0 |= SDRAM_TR0_SDRA_7_CLK;
+ break;
+ case 8:
+ tr0 |= SDRAM_TR0_SDRA_8_CLK;
+ break;
+ case 9:
+ tr0 |= SDRAM_TR0_SDRA_9_CLK;
+ break;
+ case 10:
+ tr0 |= SDRAM_TR0_SDRA_10_CLK;
+ break;
+ case 11:
+ tr0 |= SDRAM_TR0_SDRA_11_CLK;
+ break;
+ case 12:
+ tr0 |= SDRAM_TR0_SDRA_12_CLK;
+ break;
+ default:
+ tr0 |= SDRAM_TR0_SDRA_13_CLK;
+ break;
+ }
+
+ /*
+ * Program SD_RCD field
+ */
+ t_rcd_clk = sys_info.freqPLB * t_rcd_ns / ONE_BILLION;
+ plb_check = ONE_BILLION * t_rcd_clk / t_rcd_ns;
+ if (sys_info.freqPLB != plb_check) {
+ t_rcd_clk++;
+ }
+ switch (t_rcd_clk) {
+ case 0:
+ case 1:
+ case 2:
+ tr0 |= SDRAM_TR0_SDRD_2_CLK;
+ break;
+ case 3:
+ tr0 |= SDRAM_TR0_SDRD_3_CLK;
+ break;
+ default:
+ tr0 |= SDRAM_TR0_SDRD_4_CLK;
+ break;
+ }
+
+ debug("tr0: %x\n", tr0);
+ mtsdram(SDRAM0_TR0, tr0);
+}
+
+static int short_mem_test(void)
+{
+ unsigned long i, j;
+ unsigned long bxcr_num;
+ unsigned long *membase;
+ const unsigned long test[NUMMEMTESTS][NUMMEMWORDS] = {
+ {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF},
+ {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000},
+ {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555},
+ {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA},
+ {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A},
+ {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5},
+ {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA},
+ {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+ 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55}};
+
+ for (bxcr_num = 0; bxcr_num < MAXBXCR; bxcr_num++) {
+ mtdcr(SDRAM0_CFGADDR, SDRAM0_B0CR + (bxcr_num << 2));
+ if ((mfdcr(SDRAM0_CFGDATA) & SDRAM_BXCR_SDBE) == SDRAM_BXCR_SDBE) {
+ /* Bank is enabled */
+ membase = (unsigned long*)
+ (mfdcr(SDRAM0_CFGDATA) & SDRAM_BXCR_SDBA_MASK);
+
+ /*
+ * Run the short memory test
+ */
+ for (i = 0; i < NUMMEMTESTS; i++) {
+ for (j = 0; j < NUMMEMWORDS; j++) {
+ /* printf("bank enabled base:%x\n", &membase[j]); */
+ membase[j] = test[i][j];
+ ppcDcbf((unsigned long)&(membase[j]));
+ }
+
+ for (j = 0; j < NUMMEMWORDS; j++) {
+ if (membase[j] != test[i][j]) {
+ ppcDcbf((unsigned long)&(membase[j]));
+ return 0;
+ }
+ ppcDcbf((unsigned long)&(membase[j]));
+ }
+
+ if (j < NUMMEMWORDS)
+ return 0;
+ }
+
+ /*
+ * see if the rdclt value passed
+ */
+ if (i < NUMMEMTESTS)
+ return 0;
+ }
+ }
+
+ return 1;
+}
+
+static void program_tr1(void)
+{
+ unsigned long tr0;
+ unsigned long tr1;
+ unsigned long cfg0;
+ unsigned long ecc_temp;
+ unsigned long dlycal;
+ unsigned long dly_val;
+ unsigned long k;
+ unsigned long max_pass_length;
+ unsigned long current_pass_length;
+ unsigned long current_fail_length;
+ unsigned long current_start;
+ unsigned long rdclt;
+ unsigned long rdclt_offset;
+ long max_start;
+ long max_end;
+ long rdclt_average;
+ unsigned char window_found;
+ unsigned char fail_found;
+ unsigned char pass_found;
+ PPC4xx_SYS_INFO sys_info;
+
+ /*
+ * get the board info
+ */
+ get_sys_info(&sys_info);
+
+ /*
+ * get SDRAM Timing Register 0 (SDRAM_TR0) and clear bits
+ */
+ mfsdram(SDRAM0_TR1, tr1);
+ tr1 &= ~(SDRAM_TR1_RDSS_MASK | SDRAM_TR1_RDSL_MASK |
+ SDRAM_TR1_RDCD_MASK | SDRAM_TR1_RDCT_MASK);
+
+ mfsdram(SDRAM0_TR0, tr0);
+ if (((tr0 & SDRAM_TR0_SDCL_MASK) == SDRAM_TR0_SDCL_2_5_CLK) &&
+ (sys_info.freqPLB > 100000000)) {
+ tr1 |= SDRAM_TR1_RDSS_TR2;
+ tr1 |= SDRAM_TR1_RDSL_STAGE3;
+ tr1 |= SDRAM_TR1_RDCD_RCD_1_2;
+ } else {
+ tr1 |= SDRAM_TR1_RDSS_TR1;
+ tr1 |= SDRAM_TR1_RDSL_STAGE2;
+ tr1 |= SDRAM_TR1_RDCD_RCD_0_0;
+ }
+
+ /*
+ * save CFG0 ECC setting to a temporary variable and turn ECC off
+ */
+ mfsdram(SDRAM0_CFG0, cfg0);
+ ecc_temp = cfg0 & SDRAM_CFG0_MCHK_MASK;
+ mtsdram(SDRAM0_CFG0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | SDRAM_CFG0_MCHK_NON);
+
+ /*
+ * get the delay line calibration register value
+ */
+ mfsdram(SDRAM0_DLYCAL, dlycal);
+ dly_val = SDRAM_DLYCAL_DLCV_DECODE(dlycal) << 2;
+
+ max_pass_length = 0;
+ max_start = 0;
+ max_end = 0;
+ current_pass_length = 0;
+ current_fail_length = 0;
+ current_start = 0;
+ rdclt_offset = 0;
+ window_found = FALSE;
+ fail_found = FALSE;
+ pass_found = FALSE;
+ debug("Starting memory test ");
+
+ for (k = 0; k < NUMHALFCYCLES; k++) {
+ for (rdclt = 0; rdclt < dly_val; rdclt++) {
+ /*
+ * Set the timing reg for the test.
+ */
+ mtsdram(SDRAM0_TR1, (tr1 | SDRAM_TR1_RDCT_ENCODE(rdclt)));
+
+ if (short_mem_test()) {
+ if (fail_found == TRUE) {
+ pass_found = TRUE;
+ if (current_pass_length == 0) {
+ current_start = rdclt_offset + rdclt;
+ }
+
+ current_fail_length = 0;
+ current_pass_length++;
+
+ if (current_pass_length > max_pass_length) {
+ max_pass_length = current_pass_length;
+ max_start = current_start;
+ max_end = rdclt_offset + rdclt;
+ }
+ }
+ } else {
+ current_pass_length = 0;
+ current_fail_length++;
+
+ if (current_fail_length >= (dly_val>>2)) {
+ if (fail_found == FALSE) {
+ fail_found = TRUE;
+ } else if (pass_found == TRUE) {
+ window_found = TRUE;
+ break;
+ }
+ }
+ }
+ }
+ debug(".");
+
+ if (window_found == TRUE) {
+ break;
+ }
+
+ tr1 = tr1 ^ SDRAM_TR1_RDCD_MASK;
+ rdclt_offset += dly_val;
+ }
+ debug("\n");
+
+ /*
+ * make sure we find the window
+ */
+ if (window_found == FALSE) {
+ printf("ERROR: Cannot determine a common read delay.\n");
+ spd_ddr_init_hang ();
+ }
+
+ /*
+ * restore the orignal ECC setting
+ */
+ mtsdram(SDRAM0_CFG0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | ecc_temp);
+
+ /*
+ * set the SDRAM TR1 RDCD value
+ */
+ tr1 &= ~SDRAM_TR1_RDCD_MASK;
+ if ((tr0 & SDRAM_TR0_SDCL_MASK) == SDRAM_TR0_SDCL_2_5_CLK) {
+ tr1 |= SDRAM_TR1_RDCD_RCD_1_2;
+ } else {
+ tr1 |= SDRAM_TR1_RDCD_RCD_0_0;
+ }
+
+ /*
+ * set the SDRAM TR1 RDCLT value
+ */
+ tr1 &= ~SDRAM_TR1_RDCT_MASK;
+ while (max_end >= (dly_val << 1)) {
+ max_end -= (dly_val << 1);
+ max_start -= (dly_val << 1);
+ }
+
+ rdclt_average = ((max_start + max_end) >> 1);
+
+ if (rdclt_average < 0) {
+ rdclt_average = 0;
+ }
+
+ if (rdclt_average >= dly_val) {
+ rdclt_average -= dly_val;
+ tr1 = tr1 ^ SDRAM_TR1_RDCD_MASK;
+ }
+ tr1 |= SDRAM_TR1_RDCT_ENCODE(rdclt_average);
+
+ debug("tr1: %x\n", tr1);
+
+ /*
+ * program SDRAM Timing Register 1 TR1
+ */
+ mtsdram(SDRAM0_TR1, tr1);
+}
+
+static unsigned long program_bxcr(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long bank_base_addr;
+ unsigned long cr;
+ unsigned long i;
+ unsigned long j;
+ unsigned long temp;
+ unsigned char num_row_addr;
+ unsigned char num_col_addr;
+ unsigned char num_banks;
+ unsigned char bank_size_id;
+ unsigned long ctrl_bank_num[MAXBANKS];
+ unsigned long bx_cr_num;
+ unsigned long largest_size_index;
+ unsigned long largest_size;
+ unsigned long current_size_index;
+ BANKPARMS bank_parms[MAXBXCR];
+ unsigned long sorted_bank_num[MAXBXCR]; /* DDR Controller bank number table (sorted by size) */
+ unsigned long sorted_bank_size[MAXBXCR]; /* DDR Controller bank size table (sorted by size)*/
+
+ /*
+ * Set the BxCR regs. First, wipe out the bank config registers.
+ */
+ for (bx_cr_num = 0; bx_cr_num < MAXBXCR; bx_cr_num++) {
+ mtdcr(SDRAM0_CFGADDR, SDRAM0_B0CR + (bx_cr_num << 2));
+ mtdcr(SDRAM0_CFGDATA, 0x00000000);
+ bank_parms[bx_cr_num].bank_size_bytes = 0;
+ }
+
+#ifdef CONFIG_BAMBOO
+ /*
+ * This next section is hardware dependent and must be programmed
+ * to match the hardware. For bamboo, the following holds...
+ * 1. SDRAM0_B0CR: Bank 0 of dimm 0 ctrl_bank_num : 0 (soldered onboard)
+ * 2. SDRAM0_B1CR: Bank 0 of dimm 1 ctrl_bank_num : 1
+ * 3. SDRAM0_B2CR: Bank 1 of dimm 1 ctrl_bank_num : 1
+ * 4. SDRAM0_B3CR: Bank 0 of dimm 2 ctrl_bank_num : 3
+ * ctrl_bank_num corresponds to the first usable DDR controller bank number by DIMM
+ */
+ ctrl_bank_num[0] = 0;
+ ctrl_bank_num[1] = 1;
+ ctrl_bank_num[2] = 3;
+#else
+ /*
+ * Ocotea, Ebony and the other IBM/AMCC eval boards have
+ * 2 DIMM slots with each max 2 banks
+ */
+ ctrl_bank_num[0] = 0;
+ ctrl_bank_num[1] = 2;
+#endif
+
+ /*
+ * reset the bank_base address
+ */
+ bank_base_addr = CONFIG_SYS_SDRAM_BASE;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] == TRUE) {
+ num_row_addr = spd_read(iic0_dimm_addr[dimm_num], 3);
+ num_col_addr = spd_read(iic0_dimm_addr[dimm_num], 4);
+ num_banks = spd_read(iic0_dimm_addr[dimm_num], 5);
+ bank_size_id = spd_read(iic0_dimm_addr[dimm_num], 31);
+ debug("DIMM%d: row=%d col=%d banks=%d\n", dimm_num,
+ num_row_addr, num_col_addr, num_banks);
+
+ /*
+ * Set the SDRAM0_BxCR regs
+ */
+ cr = 0;
+ switch (bank_size_id) {
+ case 0x02:
+ cr |= SDRAM_BXCR_SDSZ_8;
+ break;
+ case 0x04:
+ cr |= SDRAM_BXCR_SDSZ_16;
+ break;
+ case 0x08:
+ cr |= SDRAM_BXCR_SDSZ_32;
+ break;
+ case 0x10:
+ cr |= SDRAM_BXCR_SDSZ_64;
+ break;
+ case 0x20:
+ cr |= SDRAM_BXCR_SDSZ_128;
+ break;
+ case 0x40:
+ cr |= SDRAM_BXCR_SDSZ_256;
+ break;
+ case 0x80:
+ cr |= SDRAM_BXCR_SDSZ_512;
+ break;
+ default:
+ printf("DDR-SDRAM: DIMM %lu BxCR configuration.\n",
+ dimm_num);
+ printf("ERROR: Unsupported value for the banksize: %d.\n",
+ bank_size_id);
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ spd_ddr_init_hang ();
+ }
+
+ switch (num_col_addr) {
+ case 0x08:
+ cr |= SDRAM_BXCR_SDAM_1;
+ break;
+ case 0x09:
+ cr |= SDRAM_BXCR_SDAM_2;
+ break;
+ case 0x0A:
+ cr |= SDRAM_BXCR_SDAM_3;
+ break;
+ case 0x0B:
+ cr |= SDRAM_BXCR_SDAM_4;
+ break;
+ default:
+ printf("DDR-SDRAM: DIMM %lu BxCR configuration.\n",
+ dimm_num);
+ printf("ERROR: Unsupported value for number of "
+ "column addresses: %d.\n", num_col_addr);
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ spd_ddr_init_hang ();
+ }
+
+ /*
+ * enable the bank
+ */
+ cr |= SDRAM_BXCR_SDBE;
+
+ for (i = 0; i < num_banks; i++) {
+ bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes =
+ (4 << 20) * bank_size_id;
+ bank_parms[ctrl_bank_num[dimm_num]+i].cr = cr;
+ debug("DIMM%d-bank %d (SDRAM0_B%dCR): bank_size_bytes=%d\n",
+ dimm_num, i, ctrl_bank_num[dimm_num]+i,
+ bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes);
+ }
+ }
+ }
+
+ /* Initialize sort tables */
+ for (i = 0; i < MAXBXCR; i++) {
+ sorted_bank_num[i] = i;
+ sorted_bank_size[i] = bank_parms[i].bank_size_bytes;
+ }
+
+ for (i = 0; i < MAXBXCR-1; i++) {
+ largest_size = sorted_bank_size[i];
+ largest_size_index = 255;
+
+ /* Find the largest remaining value */
+ for (j = i + 1; j < MAXBXCR; j++) {
+ if (sorted_bank_size[j] > largest_size) {
+ /* Save largest remaining value and its index */
+ largest_size = sorted_bank_size[j];
+ largest_size_index = j;
+ }
+ }
+
+ if (largest_size_index != 255) {
+ /* Swap the current and largest values */
+ current_size_index = sorted_bank_num[largest_size_index];
+ sorted_bank_size[largest_size_index] = sorted_bank_size[i];
+ sorted_bank_size[i] = largest_size;
+ sorted_bank_num[largest_size_index] = sorted_bank_num[i];
+ sorted_bank_num[i] = current_size_index;
+ }
+ }
+
+ /* Set the SDRAM0_BxCR regs thanks to sort tables */
+ for (bx_cr_num = 0, bank_base_addr = 0; bx_cr_num < MAXBXCR; bx_cr_num++) {
+ if (bank_parms[sorted_bank_num[bx_cr_num]].bank_size_bytes) {
+ mtdcr(SDRAM0_CFGADDR, SDRAM0_B0CR + (sorted_bank_num[bx_cr_num] << 2));
+ temp = mfdcr(SDRAM0_CFGDATA) & ~(SDRAM_BXCR_SDBA_MASK | SDRAM_BXCR_SDSZ_MASK |
+ SDRAM_BXCR_SDAM_MASK | SDRAM_BXCR_SDBE);
+ temp = temp | (bank_base_addr & SDRAM_BXCR_SDBA_MASK) |
+ bank_parms[sorted_bank_num[bx_cr_num]].cr;
+ mtdcr(SDRAM0_CFGDATA, temp);
+ bank_base_addr += bank_parms[sorted_bank_num[bx_cr_num]].bank_size_bytes;
+ debug("SDRAM0_B%dCR=0x%08lx\n", sorted_bank_num[bx_cr_num], temp);
+ }
+ }
+
+ return(bank_base_addr);
+}
+#endif /* CONFIG_SPD_EEPROM */
diff --git a/arch/ppc/cpu/ppc4xx/44x_spd_ddr2.c b/arch/ppc/cpu/ppc4xx/44x_spd_ddr2.c
new file mode 100644
index 0000000..ea6c2ac
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/44x_spd_ddr2.c
@@ -0,0 +1,3174 @@
+/*
+ * arch/ppc/cpu/ppc4xx/44x_spd_ddr2.c
+ * This SPD SDRAM detection code supports AMCC PPC44x cpu's with a
+ * DDR2 controller (non Denali Core). Those currently are:
+ *
+ * 405: 405EX(r)
+ * 440/460: 440SP/440SPe/460EX/460GT
+ *
+ * Copyright (c) 2008 Nuovation System Designs, LLC
+ * Grant Erickson <gerickson@nuovations.com>
+
+ * (C) Copyright 2007-2009
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * COPYRIGHT AMCC CORPORATION 2004
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/* define DEBUG for debugging output (obviously ;-)) */
+#if 0
+#define DEBUG
+#endif
+
+#include <common.h>
+#include <command.h>
+#include <ppc4xx.h>
+#include <i2c.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/cache.h>
+
+#include "ecc.h"
+
+#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2)
+
+#define PPC4xx_IBM_DDR2_DUMP_REGISTER(mnemonic) \
+ do { \
+ u32 data; \
+ mfsdram(SDRAM_##mnemonic, data); \
+ printf("%20s[%02x] = 0x%08X\n", \
+ "SDRAM_" #mnemonic, SDRAM_##mnemonic, data); \
+ } while (0)
+
+#define PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(mnemonic) \
+ do { \
+ u32 data; \
+ data = mfdcr(SDRAM_##mnemonic); \
+ printf("%20s[%02x] = 0x%08X\n", \
+ "SDRAM_" #mnemonic, SDRAM_##mnemonic, data); \
+ } while (0)
+
+#if defined(CONFIG_440)
+/*
+ * This DDR2 setup code can dynamically setup the TLB entries for the DDR2
+ * memory region. Right now the cache should still be disabled in U-Boot
+ * because of the EMAC driver, that need its buffer descriptor to be located
+ * in non cached memory.
+ *
+ * If at some time this restriction doesn't apply anymore, just define
+ * CONFIG_4xx_DCACHE in the board config file and this code should setup
+ * everything correctly.
+ */
+#ifdef CONFIG_4xx_DCACHE
+/* enable caching on SDRAM */
+#define MY_TLB_WORD2_I_ENABLE 0
+#else
+/* disable caching on SDRAM */
+#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE
+#endif /* CONFIG_4xx_DCACHE */
+
+void dcbz_area(u32 start_address, u32 num_bytes);
+#endif /* CONFIG_440 */
+
+#define MAXRANKS 4
+#define MAXBXCF 4
+
+#define MULDIV64(m1, m2, d) (u32)(((u64)(m1) * (u64)(m2)) / (u64)(d))
+
+#if !defined(CONFIG_NAND_SPL)
+/*-----------------------------------------------------------------------------+
+ * sdram_memsize
+ *-----------------------------------------------------------------------------*/
+phys_size_t sdram_memsize(void)
+{
+ phys_size_t mem_size;
+ unsigned long mcopt2;
+ unsigned long mcstat;
+ unsigned long mb0cf;
+ unsigned long sdsz;
+ unsigned long i;
+
+ mem_size = 0;
+
+ mfsdram(SDRAM_MCOPT2, mcopt2);
+ mfsdram(SDRAM_MCSTAT, mcstat);
+
+ /* DDR controller must be enabled and not in self-refresh. */
+ /* Otherwise memsize is zero. */
+ if (((mcopt2 & SDRAM_MCOPT2_DCEN_MASK) == SDRAM_MCOPT2_DCEN_ENABLE)
+ && ((mcopt2 & SDRAM_MCOPT2_SREN_MASK) == SDRAM_MCOPT2_SREN_EXIT)
+ && ((mcstat & (SDRAM_MCSTAT_MIC_MASK | SDRAM_MCSTAT_SRMS_MASK))
+ == (SDRAM_MCSTAT_MIC_COMP | SDRAM_MCSTAT_SRMS_NOT_SF))) {
+ for (i = 0; i < MAXBXCF; i++) {
+ mfsdram(SDRAM_MB0CF + (i << 2), mb0cf);
+ /* Banks enabled */
+ if ((mb0cf & SDRAM_BXCF_M_BE_MASK) == SDRAM_BXCF_M_BE_ENABLE) {
+#if defined(CONFIG_440)
+ sdsz = mfdcr_any(SDRAM_R0BAS + i) & SDRAM_RXBAS_SDSZ_MASK;
+#else
+ sdsz = mb0cf & SDRAM_RXBAS_SDSZ_MASK;
+#endif
+ switch(sdsz) {
+ case SDRAM_RXBAS_SDSZ_8:
+ mem_size+=8;
+ break;
+ case SDRAM_RXBAS_SDSZ_16:
+ mem_size+=16;
+ break;
+ case SDRAM_RXBAS_SDSZ_32:
+ mem_size+=32;
+ break;
+ case SDRAM_RXBAS_SDSZ_64:
+ mem_size+=64;
+ break;
+ case SDRAM_RXBAS_SDSZ_128:
+ mem_size+=128;
+ break;
+ case SDRAM_RXBAS_SDSZ_256:
+ mem_size+=256;
+ break;
+ case SDRAM_RXBAS_SDSZ_512:
+ mem_size+=512;
+ break;
+ case SDRAM_RXBAS_SDSZ_1024:
+ mem_size+=1024;
+ break;
+ case SDRAM_RXBAS_SDSZ_2048:
+ mem_size+=2048;
+ break;
+ case SDRAM_RXBAS_SDSZ_4096:
+ mem_size+=4096;
+ break;
+ default:
+ printf("WARNING: Unsupported bank size (SDSZ=0x%lx)!\n"
+ , sdsz);
+ mem_size=0;
+ break;
+ }
+ }
+ }
+ }
+
+ return mem_size << 20;
+}
+
+/*-----------------------------------------------------------------------------+
+ * is_ecc_enabled
+ *-----------------------------------------------------------------------------*/
+static unsigned long is_ecc_enabled(void)
+{
+ unsigned long val;
+
+ mfsdram(SDRAM_MCOPT1, val);
+
+ return SDRAM_MCOPT1_MCHK_CHK_DECODE(val);
+}
+
+/*-----------------------------------------------------------------------------+
+ * board_add_ram_info
+ *-----------------------------------------------------------------------------*/
+void board_add_ram_info(int use_default)
+{
+ PPC4xx_SYS_INFO board_cfg;
+ u32 val;
+
+ if (is_ecc_enabled())
+ puts(" (ECC");
+ else
+ puts(" (ECC not");
+
+ get_sys_info(&board_cfg);
+
+#if defined(CONFIG_405EX)
+ val = board_cfg.freqPLB;
+#else
+ mfsdr(SDR0_DDR0, val);
+ val = MULDIV64((board_cfg.freqPLB), SDR0_DDR0_DDRM_DECODE(val), 1);
+#endif
+ printf(" enabled, %d MHz", (val * 2) / 1000000);
+
+ mfsdram(SDRAM_MMODE, val);
+ val = (val & SDRAM_MMODE_DCL_MASK) >> 4;
+ printf(", CL%d)", val);
+}
+#endif /* !CONFIG_NAND_SPL */
+
+#if defined(CONFIG_SPD_EEPROM)
+
+/*-----------------------------------------------------------------------------+
+ * Defines
+ *-----------------------------------------------------------------------------*/
+#ifndef TRUE
+#define TRUE 1
+#endif
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#define SDRAM_DDR1 1
+#define SDRAM_DDR2 2
+#define SDRAM_NONE 0
+
+#define MAXDIMMS 2
+#define MAX_SPD_BYTES 256 /* Max number of bytes on the DIMM's SPD EEPROM */
+
+#define ONE_BILLION 1000000000
+
+#define CMD_NOP (7 << 19)
+#define CMD_PRECHARGE (2 << 19)
+#define CMD_REFRESH (1 << 19)
+#define CMD_EMR (0 << 19)
+#define CMD_READ (5 << 19)
+#define CMD_WRITE (4 << 19)
+
+#define SELECT_MR (0 << 16)
+#define SELECT_EMR (1 << 16)
+#define SELECT_EMR2 (2 << 16)
+#define SELECT_EMR3 (3 << 16)
+
+/* MR */
+#define DLL_RESET 0x00000100
+
+#define WRITE_RECOV_2 (1 << 9)
+#define WRITE_RECOV_3 (2 << 9)
+#define WRITE_RECOV_4 (3 << 9)
+#define WRITE_RECOV_5 (4 << 9)
+#define WRITE_RECOV_6 (5 << 9)
+
+#define BURST_LEN_4 0x00000002
+
+/* EMR */
+#define ODT_0_OHM 0x00000000
+#define ODT_50_OHM 0x00000044
+#define ODT_75_OHM 0x00000004
+#define ODT_150_OHM 0x00000040
+
+#define ODS_FULL 0x00000000
+#define ODS_REDUCED 0x00000002
+#define OCD_CALIB_DEF 0x00000380
+
+/* defines for ODT (On Die Termination) of the 440SP(e) DDR2 controller */
+#define ODT_EB0R (0x80000000 >> 8)
+#define ODT_EB0W (0x80000000 >> 7)
+#define CALC_ODT_R(n) (ODT_EB0R << (n << 1))
+#define CALC_ODT_W(n) (ODT_EB0W << (n << 1))
+#define CALC_ODT_RW(n) (CALC_ODT_R(n) | CALC_ODT_W(n))
+
+/* Defines for the Read Cycle Delay test */
+#define NUMMEMTESTS 8
+#define NUMMEMWORDS 8
+#define NUMLOOPS 64 /* memory test loops */
+
+/*
+ * Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM.
+ * To support such configurations, we "only" map the first 2GB via the TLB's. We
+ * need some free virtual address space for the remaining peripherals like, SoC
+ * devices, FLASH etc.
+ *
+ * Note that ECC is currently not supported on configurations with more than 2GB
+ * SDRAM. This is because we only map the first 2GB on such systems, and therefore
+ * the ECC parity byte of the remaining area can't be written.
+ */
+
+/*
+ * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed
+ */
+void __spd_ddr_init_hang (void)
+{
+ hang ();
+}
+void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang")));
+
+/*
+ * To provide an interface for board specific config values in this common
+ * DDR setup code, we implement he "weak" default functions here. They return
+ * the default value back to the caller.
+ *
+ * Please see include/configs/yucca.h for an example fora board specific
+ * implementation.
+ */
+u32 __ddr_wrdtr(u32 default_val)
+{
+ return default_val;
+}
+u32 ddr_wrdtr(u32) __attribute__((weak, alias("__ddr_wrdtr")));
+
+u32 __ddr_clktr(u32 default_val)
+{
+ return default_val;
+}
+u32 ddr_clktr(u32) __attribute__((weak, alias("__ddr_clktr")));
+
+
+/* Private Structure Definitions */
+
+/* enum only to ease code for cas latency setting */
+typedef enum ddr_cas_id {
+ DDR_CAS_2 = 20,
+ DDR_CAS_2_5 = 25,
+ DDR_CAS_3 = 30,
+ DDR_CAS_4 = 40,
+ DDR_CAS_5 = 50
+} ddr_cas_id_t;
+
+/*-----------------------------------------------------------------------------+
+ * Prototypes
+ *-----------------------------------------------------------------------------*/
+static void get_spd_info(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void check_mem_type(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void check_frequency(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void check_rank_number(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void check_voltage_type(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_memory_queue(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_codt(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_mode(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks,
+ ddr_cas_id_t *selected_cas,
+ int *write_recovery);
+static void program_tr(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_rtr(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_bxcf(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_copt1(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_initplr(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks,
+ ddr_cas_id_t selected_cas,
+ int write_recovery);
+#ifdef CONFIG_DDR_ECC
+static void program_ecc(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks,
+ unsigned long tlb_word2_i_value);
+#endif
+#if !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
+static void program_DQS_calibration(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+#ifdef HARD_CODED_DQS /* calibration test with hardvalues */
+static void test(void);
+#else
+static void DQS_calibration_process(void);
+#endif
+#endif
+int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+static unsigned char spd_read(uchar chip, uint addr)
+{
+ unsigned char data[2];
+
+ if (i2c_probe(chip) == 0)
+ if (i2c_read(chip, addr, 1, data, 1) == 0)
+ return data[0];
+
+ return 0;
+}
+
+/*-----------------------------------------------------------------------------+
+ * initdram. Initializes the 440SP Memory Queue and DDR SDRAM controller.
+ * Note: This routine runs from flash with a stack set up in the chip's
+ * sram space. It is important that the routine does not require .sbss, .bss or
+ * .data sections. It also cannot call routines that require these sections.
+ *-----------------------------------------------------------------------------*/
+/*-----------------------------------------------------------------------------
+ * Function: initdram
+ * Description: Configures SDRAM memory banks for DDR operation.
+ * Auto Memory Configuration option reads the DDR SDRAM EEPROMs
+ * via the IIC bus and then configures the DDR SDRAM memory
+ * banks appropriately. If Auto Memory Configuration is
+ * not used, it is assumed that no DIMM is plugged
+ *-----------------------------------------------------------------------------*/
+phys_size_t initdram(int board_type)
+{
+ unsigned char iic0_dimm_addr[] = SPD_EEPROM_ADDRESS;
+ unsigned char spd0[MAX_SPD_BYTES];
+ unsigned char spd1[MAX_SPD_BYTES];
+ unsigned char *dimm_spd[MAXDIMMS];
+ unsigned long dimm_populated[MAXDIMMS] = {SDRAM_NONE, SDRAM_NONE};
+ unsigned long num_dimm_banks; /* on board dimm banks */
+ unsigned long val;
+ ddr_cas_id_t selected_cas = DDR_CAS_5; /* preset to silence compiler */
+ int write_recovery;
+ phys_size_t dram_size = 0;
+
+ num_dimm_banks = sizeof(iic0_dimm_addr);
+
+ /*------------------------------------------------------------------
+ * Set up an array of SPD matrixes.
+ *-----------------------------------------------------------------*/
+ dimm_spd[0] = spd0;
+ dimm_spd[1] = spd1;
+
+ /*------------------------------------------------------------------
+ * Reset the DDR-SDRAM controller.
+ *-----------------------------------------------------------------*/
+ mtsdr(SDR0_SRST, (0x80000000 >> 10));
+ mtsdr(SDR0_SRST, 0x00000000);
+
+ /*
+ * Make sure I2C controller is initialized
+ * before continuing.
+ */
+
+ /* switch to correct I2C bus */
+ I2C_SET_BUS(CONFIG_SYS_SPD_BUS_NUM);
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+
+ /*------------------------------------------------------------------
+ * Clear out the serial presence detect buffers.
+ * Perform IIC reads from the dimm. Fill in the spds.
+ * Check to see if the dimm slots are populated
+ *-----------------------------------------------------------------*/
+ get_spd_info(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Check the memory type for the dimms plugged.
+ *-----------------------------------------------------------------*/
+ check_mem_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Check the frequency supported for the dimms plugged.
+ *-----------------------------------------------------------------*/
+ check_frequency(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Check the total rank number.
+ *-----------------------------------------------------------------*/
+ check_rank_number(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Check the voltage type for the dimms plugged.
+ *-----------------------------------------------------------------*/
+ check_voltage_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Program SDRAM controller options 2 register
+ * Except Enabling of the memory controller.
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_MCOPT2, val);
+ mtsdram(SDRAM_MCOPT2,
+ (val &
+ ~(SDRAM_MCOPT2_SREN_MASK | SDRAM_MCOPT2_PMEN_MASK |
+ SDRAM_MCOPT2_IPTR_MASK | SDRAM_MCOPT2_XSRP_MASK |
+ SDRAM_MCOPT2_ISIE_MASK))
+ | (SDRAM_MCOPT2_SREN_ENTER | SDRAM_MCOPT2_PMEN_DISABLE |
+ SDRAM_MCOPT2_IPTR_IDLE | SDRAM_MCOPT2_XSRP_ALLOW |
+ SDRAM_MCOPT2_ISIE_ENABLE));
+
+ /*------------------------------------------------------------------
+ * Program SDRAM controller options 1 register
+ * Note: Does not enable the memory controller.
+ *-----------------------------------------------------------------*/
+ program_copt1(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Set the SDRAM Controller On Die Termination Register
+ *-----------------------------------------------------------------*/
+ program_codt(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Program SDRAM refresh register.
+ *-----------------------------------------------------------------*/
+ program_rtr(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Program SDRAM mode register.
+ *-----------------------------------------------------------------*/
+ program_mode(dimm_populated, iic0_dimm_addr, num_dimm_banks,
+ &selected_cas, &write_recovery);
+
+ /*------------------------------------------------------------------
+ * Set the SDRAM Write Data/DM/DQS Clock Timing Reg
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_WRDTR, val);
+ mtsdram(SDRAM_WRDTR, (val & ~(SDRAM_WRDTR_LLWP_MASK | SDRAM_WRDTR_WTR_MASK)) |
+ ddr_wrdtr(SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_90_DEG_ADV));
+
+ /*------------------------------------------------------------------
+ * Set the SDRAM Clock Timing Register
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_CLKTR, val);
+ mtsdram(SDRAM_CLKTR, (val & ~SDRAM_CLKTR_CLKP_MASK) |
+ ddr_clktr(SDRAM_CLKTR_CLKP_0_DEG));
+
+ /*------------------------------------------------------------------
+ * Program the BxCF registers.
+ *-----------------------------------------------------------------*/
+ program_bxcf(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Program SDRAM timing registers.
+ *-----------------------------------------------------------------*/
+ program_tr(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Set the Extended Mode register
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_MEMODE, val);
+ mtsdram(SDRAM_MEMODE,
+ (val & ~(SDRAM_MEMODE_DIC_MASK | SDRAM_MEMODE_DLL_MASK |
+ SDRAM_MEMODE_RTT_MASK | SDRAM_MEMODE_DQS_MASK)) |
+ (SDRAM_MEMODE_DIC_NORMAL | SDRAM_MEMODE_DLL_ENABLE
+ | SDRAM_MEMODE_RTT_150OHM | SDRAM_MEMODE_DQS_ENABLE));
+
+ /*------------------------------------------------------------------
+ * Program Initialization preload registers.
+ *-----------------------------------------------------------------*/
+ program_initplr(dimm_populated, iic0_dimm_addr, num_dimm_banks,
+ selected_cas, write_recovery);
+
+ /*------------------------------------------------------------------
+ * Delay to ensure 200usec have elapsed since reset.
+ *-----------------------------------------------------------------*/
+ udelay(400);
+
+ /*------------------------------------------------------------------
+ * Set the memory queue core base addr.
+ *-----------------------------------------------------------------*/
+ program_memory_queue(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Program SDRAM controller options 2 register
+ * Enable the memory controller.
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_MCOPT2, val);
+ mtsdram(SDRAM_MCOPT2,
+ (val & ~(SDRAM_MCOPT2_SREN_MASK | SDRAM_MCOPT2_DCEN_MASK |
+ SDRAM_MCOPT2_IPTR_MASK | SDRAM_MCOPT2_ISIE_MASK)) |
+ SDRAM_MCOPT2_IPTR_EXECUTE);
+
+ /*------------------------------------------------------------------
+ * Wait for IPTR_EXECUTE init sequence to complete.
+ *-----------------------------------------------------------------*/
+ do {
+ mfsdram(SDRAM_MCSTAT, val);
+ } while ((val & SDRAM_MCSTAT_MIC_MASK) == SDRAM_MCSTAT_MIC_NOTCOMP);
+
+ /* enable the controller only after init sequence completes */
+ mfsdram(SDRAM_MCOPT2, val);
+ mtsdram(SDRAM_MCOPT2, (val | SDRAM_MCOPT2_DCEN_ENABLE));
+
+ /* Make sure delay-line calibration is done before proceeding */
+ do {
+ mfsdram(SDRAM_DLCR, val);
+ } while (!(val & SDRAM_DLCR_DLCS_COMPLETE));
+
+ /* get installed memory size */
+ dram_size = sdram_memsize();
+
+ /*
+ * Limit size to 2GB
+ */
+ if (dram_size > CONFIG_MAX_MEM_MAPPED)
+ dram_size = CONFIG_MAX_MEM_MAPPED;
+
+ /* and program tlb entries for this size (dynamic) */
+
+ /*
+ * Program TLB entries with caches enabled, for best performace
+ * while auto-calibrating and ECC generation
+ */
+ program_tlb(0, 0, dram_size, 0);
+
+ /*------------------------------------------------------------------
+ * DQS calibration.
+ *-----------------------------------------------------------------*/
+#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
+ DQS_autocalibration();
+#else
+ program_DQS_calibration(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+#endif
+
+#ifdef CONFIG_DDR_ECC
+ /*------------------------------------------------------------------
+ * If ecc is enabled, initialize the parity bits.
+ *-----------------------------------------------------------------*/
+ program_ecc(dimm_populated, iic0_dimm_addr, num_dimm_banks, 0);
+#endif
+
+ /*
+ * Now after initialization (auto-calibration and ECC generation)
+ * remove the TLB entries with caches enabled and program again with
+ * desired cache functionality
+ */
+ remove_tlb(0, dram_size);
+ program_tlb(0, 0, dram_size, MY_TLB_WORD2_I_ENABLE);
+
+ ppc4xx_ibm_ddr2_register_dump();
+
+ /*
+ * Clear potential errors resulting from auto-calibration.
+ * If not done, then we could get an interrupt later on when
+ * exceptions are enabled.
+ */
+ set_mcsr(get_mcsr());
+
+ return sdram_memsize();
+}
+
+static void get_spd_info(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long dimm_found;
+ unsigned char num_of_bytes;
+ unsigned char total_size;
+
+ dimm_found = FALSE;
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ num_of_bytes = 0;
+ total_size = 0;
+
+ num_of_bytes = spd_read(iic0_dimm_addr[dimm_num], 0);
+ debug("\nspd_read(0x%x) returned %d\n",
+ iic0_dimm_addr[dimm_num], num_of_bytes);
+ total_size = spd_read(iic0_dimm_addr[dimm_num], 1);
+ debug("spd_read(0x%x) returned %d\n",
+ iic0_dimm_addr[dimm_num], total_size);
+
+ if ((num_of_bytes != 0) && (total_size != 0)) {
+ dimm_populated[dimm_num] = TRUE;
+ dimm_found = TRUE;
+ debug("DIMM slot %lu: populated\n", dimm_num);
+ } else {
+ dimm_populated[dimm_num] = FALSE;
+ debug("DIMM slot %lu: Not populated\n", dimm_num);
+ }
+ }
+
+ if (dimm_found == FALSE) {
+ printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
+ spd_ddr_init_hang ();
+ }
+}
+
+
+/*------------------------------------------------------------------
+ * For the memory DIMMs installed, this routine verifies that they
+ * really are DDR specific DIMMs.
+ *-----------------------------------------------------------------*/
+static void check_mem_type(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long dimm_type;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] == TRUE) {
+ dimm_type = spd_read(iic0_dimm_addr[dimm_num], 2);
+ switch (dimm_type) {
+ case 1:
+ printf("ERROR: Standard Fast Page Mode DRAM DIMM detected in "
+ "slot %d.\n", (unsigned int)dimm_num);
+ printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ spd_ddr_init_hang ();
+ break;
+ case 2:
+ printf("ERROR: EDO DIMM detected in slot %d.\n",
+ (unsigned int)dimm_num);
+ printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ spd_ddr_init_hang ();
+ break;
+ case 3:
+ printf("ERROR: Pipelined Nibble DIMM detected in slot %d.\n",
+ (unsigned int)dimm_num);
+ printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ spd_ddr_init_hang ();
+ break;
+ case 4:
+ printf("ERROR: SDRAM DIMM detected in slot %d.\n",
+ (unsigned int)dimm_num);
+ printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ spd_ddr_init_hang ();
+ break;
+ case 5:
+ printf("ERROR: Multiplexed ROM DIMM detected in slot %d.\n",
+ (unsigned int)dimm_num);
+ printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ spd_ddr_init_hang ();
+ break;
+ case 6:
+ printf("ERROR: SGRAM DIMM detected in slot %d.\n",
+ (unsigned int)dimm_num);
+ printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ spd_ddr_init_hang ();
+ break;
+ case 7:
+ debug("DIMM slot %lu: DDR1 SDRAM detected\n", dimm_num);
+ dimm_populated[dimm_num] = SDRAM_DDR1;
+ break;
+ case 8:
+ debug("DIMM slot %lu: DDR2 SDRAM detected\n", dimm_num);
+ dimm_populated[dimm_num] = SDRAM_DDR2;
+ break;
+ default:
+ printf("ERROR: Unknown DIMM detected in slot %d.\n",
+ (unsigned int)dimm_num);
+ printf("Only DDR1 and DDR2 SDRAM DIMMs are supported.\n");
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ spd_ddr_init_hang ();
+ break;
+ }
+ }
+ }
+ for (dimm_num = 1; dimm_num < num_dimm_banks; dimm_num++) {
+ if ((dimm_populated[dimm_num-1] != SDRAM_NONE)
+ && (dimm_populated[dimm_num] != SDRAM_NONE)
+ && (dimm_populated[dimm_num-1] != dimm_populated[dimm_num])) {
+ printf("ERROR: DIMM's DDR1 and DDR2 type can not be mixed.\n");
+ spd_ddr_init_hang ();
+ }
+ }
+}
+
+/*------------------------------------------------------------------
+ * For the memory DIMMs installed, this routine verifies that
+ * frequency previously calculated is supported.
+ *-----------------------------------------------------------------*/
+static void check_frequency(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long tcyc_reg;
+ unsigned long cycle_time;
+ unsigned long calc_cycle_time;
+ unsigned long sdram_freq;
+ unsigned long sdr_ddrpll;
+ PPC4xx_SYS_INFO board_cfg;
+
+ /*------------------------------------------------------------------
+ * Get the board configuration info.
+ *-----------------------------------------------------------------*/
+ get_sys_info(&board_cfg);
+
+ mfsdr(SDR0_DDR0, sdr_ddrpll);
+ sdram_freq = ((board_cfg.freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
+
+ /*
+ * calc_cycle_time is calculated from DDR frequency set by board/chip
+ * and is expressed in multiple of 10 picoseconds
+ * to match the way DIMM cycle time is calculated below.
+ */
+ calc_cycle_time = MULDIV64(ONE_BILLION, 100, sdram_freq);
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] != SDRAM_NONE) {
+ tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 9);
+ /*
+ * Byte 9, Cycle time for CAS Latency=X, is split into two nibbles:
+ * the higher order nibble (bits 4-7) designates the cycle time
+ * to a granularity of 1ns;
+ * the value presented by the lower order nibble (bits 0-3)
+ * has a granularity of .1ns and is added to the value designated
+ * by the higher nibble. In addition, four lines of the lower order
+ * nibble are assigned to support +.25,+.33, +.66 and +.75.
+ */
+ /* Convert from hex to decimal */
+ if ((tcyc_reg & 0x0F) == 0x0D)
+ cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + 75;
+ else if ((tcyc_reg & 0x0F) == 0x0C)
+ cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + 66;
+ else if ((tcyc_reg & 0x0F) == 0x0B)
+ cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + 33;
+ else if ((tcyc_reg & 0x0F) == 0x0A)
+ cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + 25;
+ else
+ cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) +
+ ((tcyc_reg & 0x0F)*10);
+ debug("cycle_time=%lu [10 picoseconds]\n", cycle_time);
+
+ if (cycle_time > (calc_cycle_time + 10)) {
+ /*
+ * the provided sdram cycle_time is too small
+ * for the available DIMM cycle_time.
+ * The additionnal 100ps is here to accept a small incertainty.
+ */
+ printf("ERROR: DRAM DIMM detected with cycle_time %d ps in "
+ "slot %d \n while calculated cycle time is %d ps.\n",
+ (unsigned int)(cycle_time*10),
+ (unsigned int)dimm_num,
+ (unsigned int)(calc_cycle_time*10));
+ printf("Replace the DIMM, or change DDR frequency via "
+ "strapping bits.\n\n");
+ spd_ddr_init_hang ();
+ }
+ }
+ }
+}
+
+/*------------------------------------------------------------------
+ * For the memory DIMMs installed, this routine verifies two
+ * ranks/banks maximum are availables.
+ *-----------------------------------------------------------------*/
+static void check_rank_number(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long dimm_rank;
+ unsigned long total_rank = 0;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] != SDRAM_NONE) {
+ dimm_rank = spd_read(iic0_dimm_addr[dimm_num], 5);
+ if (((unsigned long)spd_read(iic0_dimm_addr[dimm_num], 2)) == 0x08)
+ dimm_rank = (dimm_rank & 0x0F) +1;
+ else
+ dimm_rank = dimm_rank & 0x0F;
+
+
+ if (dimm_rank > MAXRANKS) {
+ printf("ERROR: DRAM DIMM detected with %lu ranks in "
+ "slot %lu is not supported.\n", dimm_rank, dimm_num);
+ printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS);
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ spd_ddr_init_hang ();
+ } else
+ total_rank += dimm_rank;
+ }
+ if (total_rank > MAXRANKS) {
+ printf("ERROR: DRAM DIMM detected with a total of %d ranks "
+ "for all slots.\n", (unsigned int)total_rank);
+ printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS);
+ printf("Remove one of the DIMM modules.\n\n");
+ spd_ddr_init_hang ();
+ }
+ }
+}
+
+/*------------------------------------------------------------------
+ * only support 2.5V modules.
+ * This routine verifies this.
+ *-----------------------------------------------------------------*/
+static void check_voltage_type(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long voltage_type;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] != SDRAM_NONE) {
+ voltage_type = spd_read(iic0_dimm_addr[dimm_num], 8);
+ switch (voltage_type) {
+ case 0x00:
+ printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
+ printf("This DIMM is 5.0 Volt/TTL.\n");
+ printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
+ (unsigned int)dimm_num);
+ spd_ddr_init_hang ();
+ break;
+ case 0x01:
+ printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
+ printf("This DIMM is LVTTL.\n");
+ printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
+ (unsigned int)dimm_num);
+ spd_ddr_init_hang ();
+ break;
+ case 0x02:
+ printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
+ printf("This DIMM is 1.5 Volt.\n");
+ printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
+ (unsigned int)dimm_num);
+ spd_ddr_init_hang ();
+ break;
+ case 0x03:
+ printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
+ printf("This DIMM is 3.3 Volt/TTL.\n");
+ printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
+ (unsigned int)dimm_num);
+ spd_ddr_init_hang ();
+ break;
+ case 0x04:
+ /* 2.5 Voltage only for DDR1 */
+ break;
+ case 0x05:
+ /* 1.8 Voltage only for DDR2 */
+ break;
+ default:
+ printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
+ printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
+ (unsigned int)dimm_num);
+ spd_ddr_init_hang ();
+ break;
+ }
+ }
+ }
+}
+
+/*-----------------------------------------------------------------------------+
+ * program_copt1.
+ *-----------------------------------------------------------------------------*/
+static void program_copt1(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long mcopt1;
+ unsigned long ecc_enabled;
+ unsigned long ecc = 0;
+ unsigned long data_width = 0;
+ unsigned long dimm_32bit;
+ unsigned long dimm_64bit;
+ unsigned long registered = 0;
+ unsigned long attribute = 0;
+ unsigned long buf0, buf1; /* TODO: code to be changed for IOP1.6 to support 4 DIMMs */
+ unsigned long bankcount;
+ unsigned long ddrtype;
+ unsigned long val;
+
+#ifdef CONFIG_DDR_ECC
+ ecc_enabled = TRUE;
+#else
+ ecc_enabled = FALSE;
+#endif
+ dimm_32bit = FALSE;
+ dimm_64bit = FALSE;
+ buf0 = FALSE;
+ buf1 = FALSE;
+
+ /*------------------------------------------------------------------
+ * Set memory controller options reg 1, SDRAM_MCOPT1.
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_MCOPT1, val);
+ mcopt1 = val & ~(SDRAM_MCOPT1_MCHK_MASK | SDRAM_MCOPT1_RDEN_MASK |
+ SDRAM_MCOPT1_PMU_MASK | SDRAM_MCOPT1_DMWD_MASK |
+ SDRAM_MCOPT1_UIOS_MASK | SDRAM_MCOPT1_BCNT_MASK |
+ SDRAM_MCOPT1_DDR_TYPE_MASK | SDRAM_MCOPT1_RWOO_MASK |
+ SDRAM_MCOPT1_WOOO_MASK | SDRAM_MCOPT1_DCOO_MASK |
+ SDRAM_MCOPT1_DREF_MASK);
+
+ mcopt1 |= SDRAM_MCOPT1_QDEP;
+ mcopt1 |= SDRAM_MCOPT1_PMU_OPEN;
+ mcopt1 |= SDRAM_MCOPT1_RWOO_DISABLED;
+ mcopt1 |= SDRAM_MCOPT1_WOOO_DISABLED;
+ mcopt1 |= SDRAM_MCOPT1_DCOO_DISABLED;
+ mcopt1 |= SDRAM_MCOPT1_DREF_NORMAL;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] != SDRAM_NONE) {
+ /* test ecc support */
+ ecc = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 11);
+ if (ecc != 0x02) /* ecc not supported */
+ ecc_enabled = FALSE;
+
+ /* test bank count */
+ bankcount = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 17);
+ if (bankcount == 0x04) /* bank count = 4 */
+ mcopt1 |= SDRAM_MCOPT1_4_BANKS;
+ else /* bank count = 8 */
+ mcopt1 |= SDRAM_MCOPT1_8_BANKS;
+
+ /* test DDR type */
+ ddrtype = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 2);
+ /* test for buffered/unbuffered, registered, differential clocks */
+ registered = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 20);
+ attribute = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 21);
+
+ /* TODO: code to be changed for IOP1.6 to support 4 DIMMs */
+ if (dimm_num == 0) {
+ if (dimm_populated[dimm_num] == SDRAM_DDR1) /* DDR1 type */
+ mcopt1 |= SDRAM_MCOPT1_DDR1_TYPE;
+ if (dimm_populated[dimm_num] == SDRAM_DDR2) /* DDR2 type */
+ mcopt1 |= SDRAM_MCOPT1_DDR2_TYPE;
+ if (registered == 1) { /* DDR2 always buffered */
+ /* TODO: what about above comments ? */
+ mcopt1 |= SDRAM_MCOPT1_RDEN;
+ buf0 = TRUE;
+ } else {
+ /* TODO: the mask 0x02 doesn't match Samsung def for byte 21. */
+ if ((attribute & 0x02) == 0x00) {
+ /* buffered not supported */
+ buf0 = FALSE;
+ } else {
+ mcopt1 |= SDRAM_MCOPT1_RDEN;
+ buf0 = TRUE;
+ }
+ }
+ }
+ else if (dimm_num == 1) {
+ if (dimm_populated[dimm_num] == SDRAM_DDR1) /* DDR1 type */
+ mcopt1 |= SDRAM_MCOPT1_DDR1_TYPE;
+ if (dimm_populated[dimm_num] == SDRAM_DDR2) /* DDR2 type */
+ mcopt1 |= SDRAM_MCOPT1_DDR2_TYPE;
+ if (registered == 1) {
+ /* DDR2 always buffered */
+ mcopt1 |= SDRAM_MCOPT1_RDEN;
+ buf1 = TRUE;
+ } else {
+ if ((attribute & 0x02) == 0x00) {
+ /* buffered not supported */
+ buf1 = FALSE;
+ } else {
+ mcopt1 |= SDRAM_MCOPT1_RDEN;
+ buf1 = TRUE;
+ }
+ }
+ }
+
+ /* Note that for DDR2 the byte 7 is reserved, but OK to keep code as is. */
+ data_width = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 6) +
+ (((unsigned long)spd_read(iic0_dimm_addr[dimm_num], 7)) << 8);
+
+ switch (data_width) {
+ case 72:
+ case 64:
+ dimm_64bit = TRUE;
+ break;
+ case 40:
+ case 32:
+ dimm_32bit = TRUE;
+ break;
+ default:
+ printf("WARNING: Detected a DIMM with a data width of %lu bits.\n",
+ data_width);
+ printf("Only DIMMs with 32 or 64 bit DDR-SDRAM widths are supported.\n");
+ break;
+ }
+ }
+ }
+
+ /* verify matching properties */
+ if ((dimm_populated[0] != SDRAM_NONE) && (dimm_populated[1] != SDRAM_NONE)) {
+ if (buf0 != buf1) {
+ printf("ERROR: DIMM's buffered/unbuffered, registered, clocking don't match.\n");
+ spd_ddr_init_hang ();
+ }
+ }
+
+ if ((dimm_64bit == TRUE) && (dimm_32bit == TRUE)) {
+ printf("ERROR: Cannot mix 32 bit and 64 bit DDR-SDRAM DIMMs together.\n");
+ spd_ddr_init_hang ();
+ }
+ else if ((dimm_64bit == TRUE) && (dimm_32bit == FALSE)) {
+ mcopt1 |= SDRAM_MCOPT1_DMWD_64;
+ } else if ((dimm_64bit == FALSE) && (dimm_32bit == TRUE)) {
+ mcopt1 |= SDRAM_MCOPT1_DMWD_32;
+ } else {
+ printf("ERROR: Please install only 32 or 64 bit DDR-SDRAM DIMMs.\n\n");
+ spd_ddr_init_hang ();
+ }
+
+ if (ecc_enabled == TRUE)
+ mcopt1 |= SDRAM_MCOPT1_MCHK_GEN;
+ else
+ mcopt1 |= SDRAM_MCOPT1_MCHK_NON;
+
+ mtsdram(SDRAM_MCOPT1, mcopt1);
+}
+
+/*-----------------------------------------------------------------------------+
+ * program_codt.
+ *-----------------------------------------------------------------------------*/
+static void program_codt(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long codt;
+ unsigned long modt0 = 0;
+ unsigned long modt1 = 0;
+ unsigned long modt2 = 0;
+ unsigned long modt3 = 0;
+ unsigned char dimm_num;
+ unsigned char dimm_rank;
+ unsigned char total_rank = 0;
+ unsigned char total_dimm = 0;
+ unsigned char dimm_type = 0;
+ unsigned char firstSlot = 0;
+
+ /*------------------------------------------------------------------
+ * Set the SDRAM Controller On Die Termination Register
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_CODT, codt);
+ codt &= ~(SDRAM_CODT_DQS_SINGLE_END | SDRAM_CODT_CKSE_SINGLE_END);
+ codt |= SDRAM_CODT_IO_NMODE;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] != SDRAM_NONE) {
+ dimm_rank = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 5);
+ if (((unsigned long)spd_read(iic0_dimm_addr[dimm_num], 2)) == 0x08) {
+ dimm_rank = (dimm_rank & 0x0F) + 1;
+ dimm_type = SDRAM_DDR2;
+ } else {
+ dimm_rank = dimm_rank & 0x0F;
+ dimm_type = SDRAM_DDR1;
+ }
+
+ total_rank += dimm_rank;
+ total_dimm++;
+ if ((dimm_num == 0) && (total_dimm == 1))
+ firstSlot = TRUE;
+ else
+ firstSlot = FALSE;
+ }
+ }
+ if (dimm_type == SDRAM_DDR2) {
+ codt |= SDRAM_CODT_DQS_1_8_V_DDR2;
+ if ((total_dimm == 1) && (firstSlot == TRUE)) {
+ if (total_rank == 1) { /* PUUU */
+ codt |= CALC_ODT_R(0);
+ modt0 = CALC_ODT_W(0);
+ modt1 = 0x00000000;
+ modt2 = 0x00000000;
+ modt3 = 0x00000000;
+ }
+ if (total_rank == 2) { /* PPUU */
+ codt |= CALC_ODT_R(0) | CALC_ODT_R(1);
+ modt0 = CALC_ODT_W(0) | CALC_ODT_W(1);
+ modt1 = 0x00000000;
+ modt2 = 0x00000000;
+ modt3 = 0x00000000;
+ }
+ } else if ((total_dimm == 1) && (firstSlot != TRUE)) {
+ if (total_rank == 1) { /* UUPU */
+ codt |= CALC_ODT_R(2);
+ modt0 = 0x00000000;
+ modt1 = 0x00000000;
+ modt2 = CALC_ODT_W(2);
+ modt3 = 0x00000000;
+ }
+ if (total_rank == 2) { /* UUPP */
+ codt |= CALC_ODT_R(2) | CALC_ODT_R(3);
+ modt0 = 0x00000000;
+ modt1 = 0x00000000;
+ modt2 = CALC_ODT_W(2) | CALC_ODT_W(3);
+ modt3 = 0x00000000;
+ }
+ }
+ if (total_dimm == 2) {
+ if (total_rank == 2) { /* PUPU */
+ codt |= CALC_ODT_R(0) | CALC_ODT_R(2);
+ modt0 = CALC_ODT_RW(2);
+ modt1 = 0x00000000;
+ modt2 = CALC_ODT_RW(0);
+ modt3 = 0x00000000;
+ }
+ if (total_rank == 4) { /* PPPP */
+ codt |= CALC_ODT_R(0) | CALC_ODT_R(1) |
+ CALC_ODT_R(2) | CALC_ODT_R(3);
+ modt0 = CALC_ODT_RW(2) | CALC_ODT_RW(3);
+ modt1 = 0x00000000;
+ modt2 = CALC_ODT_RW(0) | CALC_ODT_RW(1);
+ modt3 = 0x00000000;
+ }
+ }
+ } else {
+ codt |= SDRAM_CODT_DQS_2_5_V_DDR1;
+ modt0 = 0x00000000;
+ modt1 = 0x00000000;
+ modt2 = 0x00000000;
+ modt3 = 0x00000000;
+
+ if (total_dimm == 1) {
+ if (total_rank == 1)
+ codt |= 0x00800000;
+ if (total_rank == 2)
+ codt |= 0x02800000;
+ }
+ if (total_dimm == 2) {
+ if (total_rank == 2)
+ codt |= 0x08800000;
+ if (total_rank == 4)
+ codt |= 0x2a800000;
+ }
+ }
+
+ debug("nb of dimm %d\n", total_dimm);
+ debug("nb of rank %d\n", total_rank);
+ if (total_dimm == 1)
+ debug("dimm in slot %d\n", firstSlot);
+
+ mtsdram(SDRAM_CODT, codt);
+ mtsdram(SDRAM_MODT0, modt0);
+ mtsdram(SDRAM_MODT1, modt1);
+ mtsdram(SDRAM_MODT2, modt2);
+ mtsdram(SDRAM_MODT3, modt3);
+}
+
+/*-----------------------------------------------------------------------------+
+ * program_initplr.
+ *-----------------------------------------------------------------------------*/
+static void program_initplr(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks,
+ ddr_cas_id_t selected_cas,
+ int write_recovery)
+{
+ u32 cas = 0;
+ u32 odt = 0;
+ u32 ods = 0;
+ u32 mr;
+ u32 wr;
+ u32 emr;
+ u32 emr2;
+ u32 emr3;
+ int dimm_num;
+ int total_dimm = 0;
+
+ /******************************************************
+ ** Assumption: if more than one DIMM, all DIMMs are the same
+ ** as already checked in check_memory_type
+ ******************************************************/
+
+ if ((dimm_populated[0] == SDRAM_DDR1) || (dimm_populated[1] == SDRAM_DDR1)) {
+ mtsdram(SDRAM_INITPLR0, 0x81B80000);
+ mtsdram(SDRAM_INITPLR1, 0x81900400);
+ mtsdram(SDRAM_INITPLR2, 0x81810000);
+ mtsdram(SDRAM_INITPLR3, 0xff800162);
+ mtsdram(SDRAM_INITPLR4, 0x81900400);
+ mtsdram(SDRAM_INITPLR5, 0x86080000);
+ mtsdram(SDRAM_INITPLR6, 0x86080000);
+ mtsdram(SDRAM_INITPLR7, 0x81000062);
+ } else if ((dimm_populated[0] == SDRAM_DDR2) || (dimm_populated[1] == SDRAM_DDR2)) {
+ switch (selected_cas) {
+ case DDR_CAS_3:
+ cas = 3 << 4;
+ break;
+ case DDR_CAS_4:
+ cas = 4 << 4;
+ break;
+ case DDR_CAS_5:
+ cas = 5 << 4;
+ break;
+ default:
+ printf("ERROR: ucode error on selected_cas value %d", selected_cas);
+ spd_ddr_init_hang ();
+ break;
+ }
+
+#if 0
+ /*
+ * ToDo - Still a problem with the write recovery:
+ * On the Corsair CM2X512-5400C4 module, setting write recovery
+ * in the INITPLR reg to the value calculated in program_mode()
+ * results in not correctly working DDR2 memory (crash after
+ * relocation).
+ *
+ * So for now, set the write recovery to 3. This seems to work
+ * on the Corair module too.
+ *
+ * 2007-03-01, sr
+ */
+ switch (write_recovery) {
+ case 3:
+ wr = WRITE_RECOV_3;
+ break;
+ case 4:
+ wr = WRITE_RECOV_4;
+ break;
+ case 5:
+ wr = WRITE_RECOV_5;
+ break;
+ case 6:
+ wr = WRITE_RECOV_6;
+ break;
+ default:
+ printf("ERROR: write recovery not support (%d)", write_recovery);
+ spd_ddr_init_hang ();
+ break;
+ }
+#else
+ wr = WRITE_RECOV_3; /* test-only, see description above */
+#endif
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++)
+ if (dimm_populated[dimm_num] != SDRAM_NONE)
+ total_dimm++;
+ if (total_dimm == 1) {
+ odt = ODT_150_OHM;
+ ods = ODS_FULL;
+ } else if (total_dimm == 2) {
+ odt = ODT_75_OHM;
+ ods = ODS_REDUCED;
+ } else {
+ printf("ERROR: Unsupported number of DIMM's (%d)", total_dimm);
+ spd_ddr_init_hang ();
+ }
+
+ mr = CMD_EMR | SELECT_MR | BURST_LEN_4 | wr | cas;
+ emr = CMD_EMR | SELECT_EMR | odt | ods;
+ emr2 = CMD_EMR | SELECT_EMR2;
+ emr3 = CMD_EMR | SELECT_EMR3;
+ /* NOP - Wait 106 MemClk cycles */
+ mtsdram(SDRAM_INITPLR0, SDRAM_INITPLR_ENABLE | CMD_NOP |
+ SDRAM_INITPLR_IMWT_ENCODE(106));
+ udelay(1000);
+ /* precharge 4 MemClk cycles */
+ mtsdram(SDRAM_INITPLR1, SDRAM_INITPLR_ENABLE | CMD_PRECHARGE |
+ SDRAM_INITPLR_IMWT_ENCODE(4));
+ /* EMR2 - Wait tMRD (2 MemClk cycles) */
+ mtsdram(SDRAM_INITPLR2, SDRAM_INITPLR_ENABLE | emr2 |
+ SDRAM_INITPLR_IMWT_ENCODE(2));
+ /* EMR3 - Wait tMRD (2 MemClk cycles) */
+ mtsdram(SDRAM_INITPLR3, SDRAM_INITPLR_ENABLE | emr3 |
+ SDRAM_INITPLR_IMWT_ENCODE(2));
+ /* EMR DLL ENABLE - Wait tMRD (2 MemClk cycles) */
+ mtsdram(SDRAM_INITPLR4, SDRAM_INITPLR_ENABLE | emr |
+ SDRAM_INITPLR_IMWT_ENCODE(2));
+ /* MR w/ DLL reset - 200 cycle wait for DLL reset */
+ mtsdram(SDRAM_INITPLR5, SDRAM_INITPLR_ENABLE | mr | DLL_RESET |
+ SDRAM_INITPLR_IMWT_ENCODE(200));
+ udelay(1000);
+ /* precharge 4 MemClk cycles */
+ mtsdram(SDRAM_INITPLR6, SDRAM_INITPLR_ENABLE | CMD_PRECHARGE |
+ SDRAM_INITPLR_IMWT_ENCODE(4));
+ /* Refresh 25 MemClk cycles */
+ mtsdram(SDRAM_INITPLR7, SDRAM_INITPLR_ENABLE | CMD_REFRESH |
+ SDRAM_INITPLR_IMWT_ENCODE(25));
+ /* Refresh 25 MemClk cycles */
+ mtsdram(SDRAM_INITPLR8, SDRAM_INITPLR_ENABLE | CMD_REFRESH |
+ SDRAM_INITPLR_IMWT_ENCODE(25));
+ /* Refresh 25 MemClk cycles */
+ mtsdram(SDRAM_INITPLR9, SDRAM_INITPLR_ENABLE | CMD_REFRESH |
+ SDRAM_INITPLR_IMWT_ENCODE(25));
+ /* Refresh 25 MemClk cycles */
+ mtsdram(SDRAM_INITPLR10, SDRAM_INITPLR_ENABLE | CMD_REFRESH |
+ SDRAM_INITPLR_IMWT_ENCODE(25));
+ /* MR w/o DLL reset - Wait tMRD (2 MemClk cycles) */
+ mtsdram(SDRAM_INITPLR11, SDRAM_INITPLR_ENABLE | mr |
+ SDRAM_INITPLR_IMWT_ENCODE(2));
+ /* EMR OCD Default - Wait tMRD (2 MemClk cycles) */
+ mtsdram(SDRAM_INITPLR12, SDRAM_INITPLR_ENABLE | OCD_CALIB_DEF |
+ SDRAM_INITPLR_IMWT_ENCODE(2) | emr);
+ /* EMR OCD Exit */
+ mtsdram(SDRAM_INITPLR13, SDRAM_INITPLR_ENABLE | emr |
+ SDRAM_INITPLR_IMWT_ENCODE(2));
+ } else {
+ printf("ERROR: ucode error as unknown DDR type in program_initplr");
+ spd_ddr_init_hang ();
+ }
+}
+
+/*------------------------------------------------------------------
+ * This routine programs the SDRAM_MMODE register.
+ * the selected_cas is an output parameter, that will be passed
+ * by caller to call the above program_initplr( )
+ *-----------------------------------------------------------------*/
+static void program_mode(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks,
+ ddr_cas_id_t *selected_cas,
+ int *write_recovery)
+{
+ unsigned long dimm_num;
+ unsigned long sdram_ddr1;
+ unsigned long t_wr_ns;
+ unsigned long t_wr_clk;
+ unsigned long cas_bit;
+ unsigned long cas_index;
+ unsigned long sdram_freq;
+ unsigned long ddr_check;
+ unsigned long mmode;
+ unsigned long tcyc_reg;
+ unsigned long cycle_2_0_clk;
+ unsigned long cycle_2_5_clk;
+ unsigned long cycle_3_0_clk;
+ unsigned long cycle_4_0_clk;
+ unsigned long cycle_5_0_clk;
+ unsigned long max_2_0_tcyc_ns_x_100;
+ unsigned long max_2_5_tcyc_ns_x_100;
+ unsigned long max_3_0_tcyc_ns_x_100;
+ unsigned long max_4_0_tcyc_ns_x_100;
+ unsigned long max_5_0_tcyc_ns_x_100;
+ unsigned long cycle_time_ns_x_100[3];
+ PPC4xx_SYS_INFO board_cfg;
+ unsigned char cas_2_0_available;
+ unsigned char cas_2_5_available;
+ unsigned char cas_3_0_available;
+ unsigned char cas_4_0_available;
+ unsigned char cas_5_0_available;
+ unsigned long sdr_ddrpll;
+
+ /*------------------------------------------------------------------
+ * Get the board configuration info.
+ *-----------------------------------------------------------------*/
+ get_sys_info(&board_cfg);
+
+ mfsdr(SDR0_DDR0, sdr_ddrpll);
+ sdram_freq = MULDIV64((board_cfg.freqPLB), SDR0_DDR0_DDRM_DECODE(sdr_ddrpll), 1);
+ debug("sdram_freq=%lu\n", sdram_freq);
+
+ /*------------------------------------------------------------------
+ * Handle the timing. We need to find the worst case timing of all
+ * the dimm modules installed.
+ *-----------------------------------------------------------------*/
+ t_wr_ns = 0;
+ cas_2_0_available = TRUE;
+ cas_2_5_available = TRUE;
+ cas_3_0_available = TRUE;
+ cas_4_0_available = TRUE;
+ cas_5_0_available = TRUE;
+ max_2_0_tcyc_ns_x_100 = 10;
+ max_2_5_tcyc_ns_x_100 = 10;
+ max_3_0_tcyc_ns_x_100 = 10;
+ max_4_0_tcyc_ns_x_100 = 10;
+ max_5_0_tcyc_ns_x_100 = 10;
+ sdram_ddr1 = TRUE;
+
+ /* loop through all the DIMM slots on the board */
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ /* If a dimm is installed in a particular slot ... */
+ if (dimm_populated[dimm_num] != SDRAM_NONE) {
+ if (dimm_populated[dimm_num] == SDRAM_DDR1)
+ sdram_ddr1 = TRUE;
+ else
+ sdram_ddr1 = FALSE;
+
+ /* t_wr_ns = max(t_wr_ns, (unsigned long)dimm_spd[dimm_num][36] >> 2); */ /* not used in this loop. */
+ cas_bit = spd_read(iic0_dimm_addr[dimm_num], 18);
+ debug("cas_bit[SPD byte 18]=%02lx\n", cas_bit);
+
+ /* For a particular DIMM, grab the three CAS values it supports */
+ for (cas_index = 0; cas_index < 3; cas_index++) {
+ switch (cas_index) {
+ case 0:
+ tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 9);
+ break;
+ case 1:
+ tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 23);
+ break;
+ default:
+ tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 25);
+ break;
+ }
+
+ if ((tcyc_reg & 0x0F) >= 10) {
+ if ((tcyc_reg & 0x0F) == 0x0D) {
+ /* Convert from hex to decimal */
+ cycle_time_ns_x_100[cas_index] =
+ (((tcyc_reg & 0xF0) >> 4) * 100) + 75;
+ } else {
+ printf("ERROR: SPD reported Tcyc is incorrect for DIMM "
+ "in slot %d\n", (unsigned int)dimm_num);
+ spd_ddr_init_hang ();
+ }
+ } else {
+ /* Convert from hex to decimal */
+ cycle_time_ns_x_100[cas_index] =
+ (((tcyc_reg & 0xF0) >> 4) * 100) +
+ ((tcyc_reg & 0x0F)*10);
+ }
+ debug("cas_index=%lu: cycle_time_ns_x_100=%lu\n", cas_index,
+ cycle_time_ns_x_100[cas_index]);
+ }
+
+ /* The rest of this routine determines if CAS 2.0, 2.5, 3.0, 4.0 and 5.0 are */
+ /* supported for a particular DIMM. */
+ cas_index = 0;
+
+ if (sdram_ddr1) {
+ /*
+ * DDR devices use the following bitmask for CAS latency:
+ * Bit 7 6 5 4 3 2 1 0
+ * TBD 4.0 3.5 3.0 2.5 2.0 1.5 1.0
+ */
+ if (((cas_bit & 0x40) == 0x40) && (cas_index < 3) &&
+ (cycle_time_ns_x_100[cas_index] != 0)) {
+ max_4_0_tcyc_ns_x_100 = max(max_4_0_tcyc_ns_x_100,
+ cycle_time_ns_x_100[cas_index]);
+ cas_index++;
+ } else {
+ if (cas_index != 0)
+ cas_index++;
+ cas_4_0_available = FALSE;
+ }
+
+ if (((cas_bit & 0x10) == 0x10) && (cas_index < 3) &&
+ (cycle_time_ns_x_100[cas_index] != 0)) {
+ max_3_0_tcyc_ns_x_100 = max(max_3_0_tcyc_ns_x_100,
+ cycle_time_ns_x_100[cas_index]);
+ cas_index++;
+ } else {
+ if (cas_index != 0)
+ cas_index++;
+ cas_3_0_available = FALSE;
+ }
+
+ if (((cas_bit & 0x08) == 0x08) && (cas_index < 3) &&
+ (cycle_time_ns_x_100[cas_index] != 0)) {
+ max_2_5_tcyc_ns_x_100 = max(max_2_5_tcyc_ns_x_100,
+ cycle_time_ns_x_100[cas_index]);
+ cas_index++;
+ } else {
+ if (cas_index != 0)
+ cas_index++;
+ cas_2_5_available = FALSE;
+ }
+
+ if (((cas_bit & 0x04) == 0x04) && (cas_index < 3) &&
+ (cycle_time_ns_x_100[cas_index] != 0)) {
+ max_2_0_tcyc_ns_x_100 = max(max_2_0_tcyc_ns_x_100,
+ cycle_time_ns_x_100[cas_index]);
+ cas_index++;
+ } else {
+ if (cas_index != 0)
+ cas_index++;
+ cas_2_0_available = FALSE;
+ }
+ } else {
+ /*
+ * DDR2 devices use the following bitmask for CAS latency:
+ * Bit 7 6 5 4 3 2 1 0
+ * TBD 6.0 5.0 4.0 3.0 2.0 TBD TBD
+ */
+ if (((cas_bit & 0x20) == 0x20) && (cas_index < 3) &&
+ (cycle_time_ns_x_100[cas_index] != 0)) {
+ max_5_0_tcyc_ns_x_100 = max(max_5_0_tcyc_ns_x_100,
+ cycle_time_ns_x_100[cas_index]);
+ cas_index++;
+ } else {
+ if (cas_index != 0)
+ cas_index++;
+ cas_5_0_available = FALSE;
+ }
+
+ if (((cas_bit & 0x10) == 0x10) && (cas_index < 3) &&
+ (cycle_time_ns_x_100[cas_index] != 0)) {
+ max_4_0_tcyc_ns_x_100 = max(max_4_0_tcyc_ns_x_100,
+ cycle_time_ns_x_100[cas_index]);
+ cas_index++;
+ } else {
+ if (cas_index != 0)
+ cas_index++;
+ cas_4_0_available = FALSE;
+ }
+
+ if (((cas_bit & 0x08) == 0x08) && (cas_index < 3) &&
+ (cycle_time_ns_x_100[cas_index] != 0)) {
+ max_3_0_tcyc_ns_x_100 = max(max_3_0_tcyc_ns_x_100,
+ cycle_time_ns_x_100[cas_index]);
+ cas_index++;
+ } else {
+ if (cas_index != 0)
+ cas_index++;
+ cas_3_0_available = FALSE;
+ }
+ }
+ }
+ }
+
+ /*------------------------------------------------------------------
+ * Set the SDRAM mode, SDRAM_MMODE
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_MMODE, mmode);
+ mmode = mmode & ~(SDRAM_MMODE_WR_MASK | SDRAM_MMODE_DCL_MASK);
+
+ /* add 10 here because of rounding problems */
+ cycle_2_0_clk = MULDIV64(ONE_BILLION, 100, max_2_0_tcyc_ns_x_100) + 10;
+ cycle_2_5_clk = MULDIV64(ONE_BILLION, 100, max_2_5_tcyc_ns_x_100) + 10;
+ cycle_3_0_clk = MULDIV64(ONE_BILLION, 100, max_3_0_tcyc_ns_x_100) + 10;
+ cycle_4_0_clk = MULDIV64(ONE_BILLION, 100, max_4_0_tcyc_ns_x_100) + 10;
+ cycle_5_0_clk = MULDIV64(ONE_BILLION, 100, max_5_0_tcyc_ns_x_100) + 10;
+ debug("cycle_3_0_clk=%lu\n", cycle_3_0_clk);
+ debug("cycle_4_0_clk=%lu\n", cycle_4_0_clk);
+ debug("cycle_5_0_clk=%lu\n", cycle_5_0_clk);
+
+ if (sdram_ddr1 == TRUE) { /* DDR1 */
+ if ((cas_2_0_available == TRUE) && (sdram_freq <= cycle_2_0_clk)) {
+ mmode |= SDRAM_MMODE_DCL_DDR1_2_0_CLK;
+ *selected_cas = DDR_CAS_2;
+ } else if ((cas_2_5_available == TRUE) && (sdram_freq <= cycle_2_5_clk)) {
+ mmode |= SDRAM_MMODE_DCL_DDR1_2_5_CLK;
+ *selected_cas = DDR_CAS_2_5;
+ } else if ((cas_3_0_available == TRUE) && (sdram_freq <= cycle_3_0_clk)) {
+ mmode |= SDRAM_MMODE_DCL_DDR1_3_0_CLK;
+ *selected_cas = DDR_CAS_3;
+ } else {
+ printf("ERROR: Cannot find a supported CAS latency with the installed DIMMs.\n");
+ printf("Only DIMMs DDR1 with CAS latencies of 2.0, 2.5, and 3.0 are supported.\n");
+ printf("Make sure the PLB speed is within the supported range of the DIMMs.\n\n");
+ spd_ddr_init_hang ();
+ }
+ } else { /* DDR2 */
+ debug("cas_3_0_available=%d\n", cas_3_0_available);
+ debug("cas_4_0_available=%d\n", cas_4_0_available);
+ debug("cas_5_0_available=%d\n", cas_5_0_available);
+ if ((cas_3_0_available == TRUE) && (sdram_freq <= cycle_3_0_clk)) {
+ mmode |= SDRAM_MMODE_DCL_DDR2_3_0_CLK;
+ *selected_cas = DDR_CAS_3;
+ } else if ((cas_4_0_available == TRUE) && (sdram_freq <= cycle_4_0_clk)) {
+ mmode |= SDRAM_MMODE_DCL_DDR2_4_0_CLK;
+ *selected_cas = DDR_CAS_4;
+ } else if ((cas_5_0_available == TRUE) && (sdram_freq <= cycle_5_0_clk)) {
+ mmode |= SDRAM_MMODE_DCL_DDR2_5_0_CLK;
+ *selected_cas = DDR_CAS_5;
+ } else {
+ printf("ERROR: Cannot find a supported CAS latency with the installed DIMMs.\n");
+ printf("Only DIMMs DDR2 with CAS latencies of 3.0, 4.0, and 5.0 are supported.\n");
+ printf("Make sure the PLB speed is within the supported range of the DIMMs.\n");
+ printf("cas3=%d cas4=%d cas5=%d\n",
+ cas_3_0_available, cas_4_0_available, cas_5_0_available);
+ printf("sdram_freq=%lu cycle3=%lu cycle4=%lu cycle5=%lu\n\n",
+ sdram_freq, cycle_3_0_clk, cycle_4_0_clk, cycle_5_0_clk);
+ spd_ddr_init_hang ();
+ }
+ }
+
+ if (sdram_ddr1 == TRUE)
+ mmode |= SDRAM_MMODE_WR_DDR1;
+ else {
+
+ /* loop through all the DIMM slots on the board */
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ /* If a dimm is installed in a particular slot ... */
+ if (dimm_populated[dimm_num] != SDRAM_NONE)
+ t_wr_ns = max(t_wr_ns,
+ spd_read(iic0_dimm_addr[dimm_num], 36) >> 2);
+ }
+
+ /*
+ * convert from nanoseconds to ddr clocks
+ * round up if necessary
+ */
+ t_wr_clk = MULDIV64(sdram_freq, t_wr_ns, ONE_BILLION);
+ ddr_check = MULDIV64(ONE_BILLION, t_wr_clk, t_wr_ns);
+ if (sdram_freq != ddr_check)
+ t_wr_clk++;
+
+ switch (t_wr_clk) {
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ mmode |= SDRAM_MMODE_WR_DDR2_3_CYC;
+ break;
+ case 4:
+ mmode |= SDRAM_MMODE_WR_DDR2_4_CYC;
+ break;
+ case 5:
+ mmode |= SDRAM_MMODE_WR_DDR2_5_CYC;
+ break;
+ default:
+ mmode |= SDRAM_MMODE_WR_DDR2_6_CYC;
+ break;
+ }
+ *write_recovery = t_wr_clk;
+ }
+
+ debug("CAS latency = %d\n", *selected_cas);
+ debug("Write recovery = %d\n", *write_recovery);
+
+ mtsdram(SDRAM_MMODE, mmode);
+}
+
+/*-----------------------------------------------------------------------------+
+ * program_rtr.
+ *-----------------------------------------------------------------------------*/
+static void program_rtr(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ PPC4xx_SYS_INFO board_cfg;
+ unsigned long max_refresh_rate;
+ unsigned long dimm_num;
+ unsigned long refresh_rate_type;
+ unsigned long refresh_rate;
+ unsigned long rint;
+ unsigned long sdram_freq;
+ unsigned long sdr_ddrpll;
+ unsigned long val;
+
+ /*------------------------------------------------------------------
+ * Get the board configuration info.
+ *-----------------------------------------------------------------*/
+ get_sys_info(&board_cfg);
+
+ /*------------------------------------------------------------------
+ * Set the SDRAM Refresh Timing Register, SDRAM_RTR
+ *-----------------------------------------------------------------*/
+ mfsdr(SDR0_DDR0, sdr_ddrpll);
+ sdram_freq = ((board_cfg.freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
+
+ max_refresh_rate = 0;
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] != SDRAM_NONE) {
+
+ refresh_rate_type = spd_read(iic0_dimm_addr[dimm_num], 12);
+ refresh_rate_type &= 0x7F;
+ switch (refresh_rate_type) {
+ case 0:
+ refresh_rate = 15625;
+ break;
+ case 1:
+ refresh_rate = 3906;
+ break;
+ case 2:
+ refresh_rate = 7812;
+ break;
+ case 3:
+ refresh_rate = 31250;
+ break;
+ case 4:
+ refresh_rate = 62500;
+ break;
+ case 5:
+ refresh_rate = 125000;
+ break;
+ default:
+ refresh_rate = 0;
+ printf("ERROR: DIMM %d unsupported refresh rate/type.\n",
+ (unsigned int)dimm_num);
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ spd_ddr_init_hang ();
+ break;
+ }
+
+ max_refresh_rate = max(max_refresh_rate, refresh_rate);
+ }
+ }
+
+ rint = MULDIV64(sdram_freq, max_refresh_rate, ONE_BILLION);
+ mfsdram(SDRAM_RTR, val);
+ mtsdram(SDRAM_RTR, (val & ~SDRAM_RTR_RINT_MASK) |
+ (SDRAM_RTR_RINT_ENCODE(rint)));
+}
+
+/*------------------------------------------------------------------
+ * This routine programs the SDRAM_TRx registers.
+ *-----------------------------------------------------------------*/
+static void program_tr(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long sdram_ddr1;
+ unsigned long t_rp_ns;
+ unsigned long t_rcd_ns;
+ unsigned long t_rrd_ns;
+ unsigned long t_ras_ns;
+ unsigned long t_rc_ns;
+ unsigned long t_rfc_ns;
+ unsigned long t_wpc_ns;
+ unsigned long t_wtr_ns;
+ unsigned long t_rpc_ns;
+ unsigned long t_rp_clk;
+ unsigned long t_rcd_clk;
+ unsigned long t_rrd_clk;
+ unsigned long t_ras_clk;
+ unsigned long t_rc_clk;
+ unsigned long t_rfc_clk;
+ unsigned long t_wpc_clk;
+ unsigned long t_wtr_clk;
+ unsigned long t_rpc_clk;
+ unsigned long sdtr1, sdtr2, sdtr3;
+ unsigned long ddr_check;
+ unsigned long sdram_freq;
+ unsigned long sdr_ddrpll;
+
+ PPC4xx_SYS_INFO board_cfg;
+
+ /*------------------------------------------------------------------
+ * Get the board configuration info.
+ *-----------------------------------------------------------------*/
+ get_sys_info(&board_cfg);
+
+ mfsdr(SDR0_DDR0, sdr_ddrpll);
+ sdram_freq = ((board_cfg.freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
+
+ /*------------------------------------------------------------------
+ * Handle the timing. We need to find the worst case timing of all
+ * the dimm modules installed.
+ *-----------------------------------------------------------------*/
+ t_rp_ns = 0;
+ t_rrd_ns = 0;
+ t_rcd_ns = 0;
+ t_ras_ns = 0;
+ t_rc_ns = 0;
+ t_rfc_ns = 0;
+ t_wpc_ns = 0;
+ t_wtr_ns = 0;
+ t_rpc_ns = 0;
+ sdram_ddr1 = TRUE;
+
+ /* loop through all the DIMM slots on the board */
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ /* If a dimm is installed in a particular slot ... */
+ if (dimm_populated[dimm_num] != SDRAM_NONE) {
+ if (dimm_populated[dimm_num] == SDRAM_DDR2)
+ sdram_ddr1 = TRUE;
+ else
+ sdram_ddr1 = FALSE;
+
+ t_rcd_ns = max(t_rcd_ns, spd_read(iic0_dimm_addr[dimm_num], 29) >> 2);
+ t_rrd_ns = max(t_rrd_ns, spd_read(iic0_dimm_addr[dimm_num], 28) >> 2);
+ t_rp_ns = max(t_rp_ns, spd_read(iic0_dimm_addr[dimm_num], 27) >> 2);
+ t_ras_ns = max(t_ras_ns, spd_read(iic0_dimm_addr[dimm_num], 30));
+ t_rc_ns = max(t_rc_ns, spd_read(iic0_dimm_addr[dimm_num], 41));
+ t_rfc_ns = max(t_rfc_ns, spd_read(iic0_dimm_addr[dimm_num], 42));
+ }
+ }
+
+ /*------------------------------------------------------------------
+ * Set the SDRAM Timing Reg 1, SDRAM_TR1
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_SDTR1, sdtr1);
+ sdtr1 &= ~(SDRAM_SDTR1_LDOF_MASK | SDRAM_SDTR1_RTW_MASK |
+ SDRAM_SDTR1_WTWO_MASK | SDRAM_SDTR1_RTRO_MASK);
+
+ /* default values */
+ sdtr1 |= SDRAM_SDTR1_LDOF_2_CLK;
+ sdtr1 |= SDRAM_SDTR1_RTW_2_CLK;
+
+ /* normal operations */
+ sdtr1 |= SDRAM_SDTR1_WTWO_0_CLK;
+ sdtr1 |= SDRAM_SDTR1_RTRO_1_CLK;
+
+ mtsdram(SDRAM_SDTR1, sdtr1);
+
+ /*------------------------------------------------------------------
+ * Set the SDRAM Timing Reg 2, SDRAM_TR2
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_SDTR2, sdtr2);
+ sdtr2 &= ~(SDRAM_SDTR2_RCD_MASK | SDRAM_SDTR2_WTR_MASK |
+ SDRAM_SDTR2_XSNR_MASK | SDRAM_SDTR2_WPC_MASK |
+ SDRAM_SDTR2_RPC_MASK | SDRAM_SDTR2_RP_MASK |
+ SDRAM_SDTR2_RRD_MASK);
+
+ /*
+ * convert t_rcd from nanoseconds to ddr clocks
+ * round up if necessary
+ */
+ t_rcd_clk = MULDIV64(sdram_freq, t_rcd_ns, ONE_BILLION);
+ ddr_check = MULDIV64(ONE_BILLION, t_rcd_clk, t_rcd_ns);
+ if (sdram_freq != ddr_check)
+ t_rcd_clk++;
+
+ switch (t_rcd_clk) {
+ case 0:
+ case 1:
+ sdtr2 |= SDRAM_SDTR2_RCD_1_CLK;
+ break;
+ case 2:
+ sdtr2 |= SDRAM_SDTR2_RCD_2_CLK;
+ break;
+ case 3:
+ sdtr2 |= SDRAM_SDTR2_RCD_3_CLK;
+ break;
+ case 4:
+ sdtr2 |= SDRAM_SDTR2_RCD_4_CLK;
+ break;
+ default:
+ sdtr2 |= SDRAM_SDTR2_RCD_5_CLK;
+ break;
+ }
+
+ if (sdram_ddr1 == TRUE) { /* DDR1 */
+ if (sdram_freq < 200000000) {
+ sdtr2 |= SDRAM_SDTR2_WTR_1_CLK;
+ sdtr2 |= SDRAM_SDTR2_WPC_2_CLK;
+ sdtr2 |= SDRAM_SDTR2_RPC_2_CLK;
+ } else {
+ sdtr2 |= SDRAM_SDTR2_WTR_2_CLK;
+ sdtr2 |= SDRAM_SDTR2_WPC_3_CLK;
+ sdtr2 |= SDRAM_SDTR2_RPC_2_CLK;
+ }
+ } else { /* DDR2 */
+ /* loop through all the DIMM slots on the board */
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ /* If a dimm is installed in a particular slot ... */
+ if (dimm_populated[dimm_num] != SDRAM_NONE) {
+ t_wpc_ns = max(t_wtr_ns, spd_read(iic0_dimm_addr[dimm_num], 36) >> 2);
+ t_wtr_ns = max(t_wtr_ns, spd_read(iic0_dimm_addr[dimm_num], 37) >> 2);
+ t_rpc_ns = max(t_rpc_ns, spd_read(iic0_dimm_addr[dimm_num], 38) >> 2);
+ }
+ }
+
+ /*
+ * convert from nanoseconds to ddr clocks
+ * round up if necessary
+ */
+ t_wpc_clk = MULDIV64(sdram_freq, t_wpc_ns, ONE_BILLION);
+ ddr_check = MULDIV64(ONE_BILLION, t_wpc_clk, t_wpc_ns);
+ if (sdram_freq != ddr_check)
+ t_wpc_clk++;
+
+ switch (t_wpc_clk) {
+ case 0:
+ case 1:
+ case 2:
+ sdtr2 |= SDRAM_SDTR2_WPC_2_CLK;
+ break;
+ case 3:
+ sdtr2 |= SDRAM_SDTR2_WPC_3_CLK;
+ break;
+ case 4:
+ sdtr2 |= SDRAM_SDTR2_WPC_4_CLK;
+ break;
+ case 5:
+ sdtr2 |= SDRAM_SDTR2_WPC_5_CLK;
+ break;
+ default:
+ sdtr2 |= SDRAM_SDTR2_WPC_6_CLK;
+ break;
+ }
+
+ /*
+ * convert from nanoseconds to ddr clocks
+ * round up if necessary
+ */
+ t_wtr_clk = MULDIV64(sdram_freq, t_wtr_ns, ONE_BILLION);
+ ddr_check = MULDIV64(ONE_BILLION, t_wtr_clk, t_wtr_ns);
+ if (sdram_freq != ddr_check)
+ t_wtr_clk++;
+
+ switch (t_wtr_clk) {
+ case 0:
+ case 1:
+ sdtr2 |= SDRAM_SDTR2_WTR_1_CLK;
+ break;
+ case 2:
+ sdtr2 |= SDRAM_SDTR2_WTR_2_CLK;
+ break;
+ case 3:
+ sdtr2 |= SDRAM_SDTR2_WTR_3_CLK;
+ break;
+ default:
+ sdtr2 |= SDRAM_SDTR2_WTR_4_CLK;
+ break;
+ }
+
+ /*
+ * convert from nanoseconds to ddr clocks
+ * round up if necessary
+ */
+ t_rpc_clk = MULDIV64(sdram_freq, t_rpc_ns, ONE_BILLION);
+ ddr_check = MULDIV64(ONE_BILLION, t_rpc_clk, t_rpc_ns);
+ if (sdram_freq != ddr_check)
+ t_rpc_clk++;
+
+ switch (t_rpc_clk) {
+ case 0:
+ case 1:
+ case 2:
+ sdtr2 |= SDRAM_SDTR2_RPC_2_CLK;
+ break;
+ case 3:
+ sdtr2 |= SDRAM_SDTR2_RPC_3_CLK;
+ break;
+ default:
+ sdtr2 |= SDRAM_SDTR2_RPC_4_CLK;
+ break;
+ }
+ }
+
+ /* default value */
+ sdtr2 |= SDRAM_SDTR2_XSNR_16_CLK;
+
+ /*
+ * convert t_rrd from nanoseconds to ddr clocks
+ * round up if necessary
+ */
+ t_rrd_clk = MULDIV64(sdram_freq, t_rrd_ns, ONE_BILLION);
+ ddr_check = MULDIV64(ONE_BILLION, t_rrd_clk, t_rrd_ns);
+ if (sdram_freq != ddr_check)
+ t_rrd_clk++;
+
+ if (t_rrd_clk == 3)
+ sdtr2 |= SDRAM_SDTR2_RRD_3_CLK;
+ else
+ sdtr2 |= SDRAM_SDTR2_RRD_2_CLK;
+
+ /*
+ * convert t_rp from nanoseconds to ddr clocks
+ * round up if necessary
+ */
+ t_rp_clk = MULDIV64(sdram_freq, t_rp_ns, ONE_BILLION);
+ ddr_check = MULDIV64(ONE_BILLION, t_rp_clk, t_rp_ns);
+ if (sdram_freq != ddr_check)
+ t_rp_clk++;
+
+ switch (t_rp_clk) {
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ sdtr2 |= SDRAM_SDTR2_RP_3_CLK;
+ break;
+ case 4:
+ sdtr2 |= SDRAM_SDTR2_RP_4_CLK;
+ break;
+ case 5:
+ sdtr2 |= SDRAM_SDTR2_RP_5_CLK;
+ break;
+ case 6:
+ sdtr2 |= SDRAM_SDTR2_RP_6_CLK;
+ break;
+ default:
+ sdtr2 |= SDRAM_SDTR2_RP_7_CLK;
+ break;
+ }
+
+ mtsdram(SDRAM_SDTR2, sdtr2);
+
+ /*------------------------------------------------------------------
+ * Set the SDRAM Timing Reg 3, SDRAM_TR3
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_SDTR3, sdtr3);
+ sdtr3 &= ~(SDRAM_SDTR3_RAS_MASK | SDRAM_SDTR3_RC_MASK |
+ SDRAM_SDTR3_XCS_MASK | SDRAM_SDTR3_RFC_MASK);
+
+ /*
+ * convert t_ras from nanoseconds to ddr clocks
+ * round up if necessary
+ */
+ t_ras_clk = MULDIV64(sdram_freq, t_ras_ns, ONE_BILLION);
+ ddr_check = MULDIV64(ONE_BILLION, t_ras_clk, t_ras_ns);
+ if (sdram_freq != ddr_check)
+ t_ras_clk++;
+
+ sdtr3 |= SDRAM_SDTR3_RAS_ENCODE(t_ras_clk);
+
+ /*
+ * convert t_rc from nanoseconds to ddr clocks
+ * round up if necessary
+ */
+ t_rc_clk = MULDIV64(sdram_freq, t_rc_ns, ONE_BILLION);
+ ddr_check = MULDIV64(ONE_BILLION, t_rc_clk, t_rc_ns);
+ if (sdram_freq != ddr_check)
+ t_rc_clk++;
+
+ sdtr3 |= SDRAM_SDTR3_RC_ENCODE(t_rc_clk);
+
+ /* default xcs value */
+ sdtr3 |= SDRAM_SDTR3_XCS;
+
+ /*
+ * convert t_rfc from nanoseconds to ddr clocks
+ * round up if necessary
+ */
+ t_rfc_clk = MULDIV64(sdram_freq, t_rfc_ns, ONE_BILLION);
+ ddr_check = MULDIV64(ONE_BILLION, t_rfc_clk, t_rfc_ns);
+ if (sdram_freq != ddr_check)
+ t_rfc_clk++;
+
+ sdtr3 |= SDRAM_SDTR3_RFC_ENCODE(t_rfc_clk);
+
+ mtsdram(SDRAM_SDTR3, sdtr3);
+}
+
+/*-----------------------------------------------------------------------------+
+ * program_bxcf.
+ *-----------------------------------------------------------------------------*/
+static void program_bxcf(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long num_col_addr;
+ unsigned long num_ranks;
+ unsigned long num_banks;
+ unsigned long mode;
+ unsigned long ind_rank;
+ unsigned long ind;
+ unsigned long ind_bank;
+ unsigned long bank_0_populated;
+
+ /*------------------------------------------------------------------
+ * Set the BxCF regs. First, wipe out the bank config registers.
+ *-----------------------------------------------------------------*/
+ mtsdram(SDRAM_MB0CF, 0x00000000);
+ mtsdram(SDRAM_MB1CF, 0x00000000);
+ mtsdram(SDRAM_MB2CF, 0x00000000);
+ mtsdram(SDRAM_MB3CF, 0x00000000);
+
+ mode = SDRAM_BXCF_M_BE_ENABLE;
+
+ bank_0_populated = 0;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] != SDRAM_NONE) {
+ num_col_addr = spd_read(iic0_dimm_addr[dimm_num], 4);
+ num_ranks = spd_read(iic0_dimm_addr[dimm_num], 5);
+ if ((spd_read(iic0_dimm_addr[dimm_num], 2)) == 0x08)
+ num_ranks = (num_ranks & 0x0F) +1;
+ else
+ num_ranks = num_ranks & 0x0F;
+
+ num_banks = spd_read(iic0_dimm_addr[dimm_num], 17);
+
+ for (ind_bank = 0; ind_bank < 2; ind_bank++) {
+ if (num_banks == 4)
+ ind = 0;
+ else
+ ind = 5 << 8;
+ switch (num_col_addr) {
+ case 0x08:
+ mode |= (SDRAM_BXCF_M_AM_0 + ind);
+ break;
+ case 0x09:
+ mode |= (SDRAM_BXCF_M_AM_1 + ind);
+ break;
+ case 0x0A:
+ mode |= (SDRAM_BXCF_M_AM_2 + ind);
+ break;
+ case 0x0B:
+ mode |= (SDRAM_BXCF_M_AM_3 + ind);
+ break;
+ case 0x0C:
+ mode |= (SDRAM_BXCF_M_AM_4 + ind);
+ break;
+ default:
+ printf("DDR-SDRAM: DIMM %d BxCF configuration.\n",
+ (unsigned int)dimm_num);
+ printf("ERROR: Unsupported value for number of "
+ "column addresses: %d.\n", (unsigned int)num_col_addr);
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ spd_ddr_init_hang ();
+ }
+ }
+
+ if ((dimm_populated[dimm_num] != SDRAM_NONE)&& (dimm_num ==1))
+ bank_0_populated = 1;
+
+ for (ind_rank = 0; ind_rank < num_ranks; ind_rank++) {
+ mtsdram(SDRAM_MB0CF +
+ ((dimm_num + bank_0_populated + ind_rank) << 2),
+ mode);
+ }
+ }
+ }
+}
+
+/*------------------------------------------------------------------
+ * program memory queue.
+ *-----------------------------------------------------------------*/
+static void program_memory_queue(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ phys_size_t rank_base_addr;
+ unsigned long rank_reg;
+ phys_size_t rank_size_bytes;
+ unsigned long rank_size_id;
+ unsigned long num_ranks;
+ unsigned long baseadd_size;
+ unsigned long i;
+ unsigned long bank_0_populated = 0;
+ phys_size_t total_size = 0;
+
+ /*------------------------------------------------------------------
+ * Reset the rank_base_address.
+ *-----------------------------------------------------------------*/
+ rank_reg = SDRAM_R0BAS;
+
+ rank_base_addr = 0x00000000;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] != SDRAM_NONE) {
+ num_ranks = spd_read(iic0_dimm_addr[dimm_num], 5);
+ if ((spd_read(iic0_dimm_addr[dimm_num], 2)) == 0x08)
+ num_ranks = (num_ranks & 0x0F) + 1;
+ else
+ num_ranks = num_ranks & 0x0F;
+
+ rank_size_id = spd_read(iic0_dimm_addr[dimm_num], 31);
+
+ /*------------------------------------------------------------------
+ * Set the sizes
+ *-----------------------------------------------------------------*/
+ baseadd_size = 0;
+ switch (rank_size_id) {
+ case 0x01:
+ baseadd_size |= SDRAM_RXBAS_SDSZ_1024;
+ total_size = 1024;
+ break;
+ case 0x02:
+ baseadd_size |= SDRAM_RXBAS_SDSZ_2048;
+ total_size = 2048;
+ break;
+ case 0x04:
+ baseadd_size |= SDRAM_RXBAS_SDSZ_4096;
+ total_size = 4096;
+ break;
+ case 0x08:
+ baseadd_size |= SDRAM_RXBAS_SDSZ_32;
+ total_size = 32;
+ break;
+ case 0x10:
+ baseadd_size |= SDRAM_RXBAS_SDSZ_64;
+ total_size = 64;
+ break;
+ case 0x20:
+ baseadd_size |= SDRAM_RXBAS_SDSZ_128;
+ total_size = 128;
+ break;
+ case 0x40:
+ baseadd_size |= SDRAM_RXBAS_SDSZ_256;
+ total_size = 256;
+ break;
+ case 0x80:
+ baseadd_size |= SDRAM_RXBAS_SDSZ_512;
+ total_size = 512;
+ break;
+ default:
+ printf("DDR-SDRAM: DIMM %d memory queue configuration.\n",
+ (unsigned int)dimm_num);
+ printf("ERROR: Unsupported value for the banksize: %d.\n",
+ (unsigned int)rank_size_id);
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ spd_ddr_init_hang ();
+ }
+ rank_size_bytes = total_size << 20;
+
+ if ((dimm_populated[dimm_num] != SDRAM_NONE) && (dimm_num == 1))
+ bank_0_populated = 1;
+
+ for (i = 0; i < num_ranks; i++) {
+ mtdcr_any(rank_reg+i+dimm_num+bank_0_populated,
+ (SDRAM_RXBAS_SDBA_ENCODE(rank_base_addr) |
+ baseadd_size));
+ rank_base_addr += rank_size_bytes;
+ }
+ }
+ }
+
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+ defined(CONFIG_460SX)
+ /*
+ * Enable high bandwidth access
+ * This is currently not used, but with this setup
+ * it is possible to use it later on in e.g. the Linux
+ * EMAC driver for performance gain.
+ */
+ mtdcr(SDRAM_PLBADDULL, 0x00000000); /* MQ0_BAUL */
+ mtdcr(SDRAM_PLBADDUHB, 0x00000008); /* MQ0_BAUH */
+
+ /*
+ * Set optimal value for Memory Queue HB/LL Configuration registers
+ */
+ mtdcr(SDRAM_CONF1HB, (mfdcr(SDRAM_CONF1HB) & ~SDRAM_CONF1HB_MASK) |
+ SDRAM_CONF1HB_AAFR | SDRAM_CONF1HB_RPEN | SDRAM_CONF1HB_RFTE |
+ SDRAM_CONF1HB_RPLM | SDRAM_CONF1HB_WRCL);
+ mtdcr(SDRAM_CONF1LL, (mfdcr(SDRAM_CONF1LL) & ~SDRAM_CONF1LL_MASK) |
+ SDRAM_CONF1LL_AAFR | SDRAM_CONF1LL_RPEN | SDRAM_CONF1LL_RFTE |
+ SDRAM_CONF1LL_RPLM);
+ mtdcr(SDRAM_CONFPATHB, mfdcr(SDRAM_CONFPATHB) | SDRAM_CONFPATHB_TPEN);
+#endif
+}
+
+#ifdef CONFIG_DDR_ECC
+/*-----------------------------------------------------------------------------+
+ * program_ecc.
+ *-----------------------------------------------------------------------------*/
+static void program_ecc(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks,
+ unsigned long tlb_word2_i_value)
+{
+ unsigned long dimm_num;
+ unsigned long ecc;
+
+ ecc = 0;
+ /* loop through all the DIMM slots on the board */
+ for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) {
+ /* If a dimm is installed in a particular slot ... */
+ if (dimm_populated[dimm_num] != SDRAM_NONE)
+ ecc = max(ecc, spd_read(iic0_dimm_addr[dimm_num], 11));
+ }
+ if (ecc == 0)
+ return;
+
+ do_program_ecc(tlb_word2_i_value);
+}
+#endif
+
+#if !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
+/*-----------------------------------------------------------------------------+
+ * program_DQS_calibration.
+ *-----------------------------------------------------------------------------*/
+static void program_DQS_calibration(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long val;
+
+#ifdef HARD_CODED_DQS /* calibration test with hardvalues */
+ mtsdram(SDRAM_RQDC, 0x80000037);
+ mtsdram(SDRAM_RDCC, 0x40000000);
+ mtsdram(SDRAM_RFDC, 0x000001DF);
+
+ test();
+#else
+ /*------------------------------------------------------------------
+ * Program RDCC register
+ * Read sample cycle auto-update enable
+ *-----------------------------------------------------------------*/
+
+ mfsdram(SDRAM_RDCC, val);
+ mtsdram(SDRAM_RDCC,
+ (val & ~(SDRAM_RDCC_RDSS_MASK | SDRAM_RDCC_RSAE_MASK))
+ | SDRAM_RDCC_RSAE_ENABLE);
+
+ /*------------------------------------------------------------------
+ * Program RQDC register
+ * Internal DQS delay mechanism enable
+ *-----------------------------------------------------------------*/
+ mtsdram(SDRAM_RQDC, (SDRAM_RQDC_RQDE_ENABLE|SDRAM_RQDC_RQFD_ENCODE(0x38)));
+
+ /*------------------------------------------------------------------
+ * Program RFDC register
+ * Set Feedback Fractional Oversample
+ * Auto-detect read sample cycle enable
+ * Set RFOS to 1/4 of memclk cycle (0x3f)
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_RFDC, val);
+ mtsdram(SDRAM_RFDC,
+ (val & ~(SDRAM_RFDC_ARSE_MASK | SDRAM_RFDC_RFOS_MASK |
+ SDRAM_RFDC_RFFD_MASK))
+ | (SDRAM_RFDC_ARSE_ENABLE | SDRAM_RFDC_RFOS_ENCODE(0x3f) |
+ SDRAM_RFDC_RFFD_ENCODE(0)));
+
+ DQS_calibration_process();
+#endif
+}
+
+static int short_mem_test(void)
+{
+ u32 *membase;
+ u32 bxcr_num;
+ u32 bxcf;
+ int i;
+ int j;
+ phys_size_t base_addr;
+ u32 test[NUMMEMTESTS][NUMMEMWORDS] = {
+ {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF},
+ {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000},
+ {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555},
+ {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA},
+ {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A},
+ {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5},
+ {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA},
+ {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+ 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55} };
+ int l;
+
+ for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) {
+ mfsdram(SDRAM_MB0CF + (bxcr_num << 2), bxcf);
+
+ /* Banks enabled */
+ if ((bxcf & SDRAM_BXCF_M_BE_MASK) == SDRAM_BXCF_M_BE_ENABLE) {
+ /* Bank is enabled */
+
+ /*
+ * Only run test on accessable memory (below 2GB)
+ */
+ base_addr = SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+bxcr_num));
+ if (base_addr >= CONFIG_MAX_MEM_MAPPED)
+ continue;
+
+ /*------------------------------------------------------------------
+ * Run the short memory test.
+ *-----------------------------------------------------------------*/
+ membase = (u32 *)(u32)base_addr;
+
+ for (i = 0; i < NUMMEMTESTS; i++) {
+ for (j = 0; j < NUMMEMWORDS; j++) {
+ membase[j] = test[i][j];
+ ppcDcbf((u32)&(membase[j]));
+ }
+ sync();
+ for (l=0; l<NUMLOOPS; l++) {
+ for (j = 0; j < NUMMEMWORDS; j++) {
+ if (membase[j] != test[i][j]) {
+ ppcDcbf((u32)&(membase[j]));
+ return 0;
+ }
+ ppcDcbf((u32)&(membase[j]));
+ }
+ sync();
+ }
+ }
+ } /* if bank enabled */
+ } /* for bxcf_num */
+
+ return 1;
+}
+
+#ifndef HARD_CODED_DQS
+/*-----------------------------------------------------------------------------+
+ * DQS_calibration_process.
+ *-----------------------------------------------------------------------------*/
+static void DQS_calibration_process(void)
+{
+ unsigned long rfdc_reg;
+ unsigned long rffd;
+ unsigned long val;
+ long rffd_average;
+ long max_start;
+ long min_end;
+ unsigned long begin_rqfd[MAXRANKS];
+ unsigned long begin_rffd[MAXRANKS];
+ unsigned long end_rqfd[MAXRANKS];
+ unsigned long end_rffd[MAXRANKS];
+ char window_found;
+ unsigned long dlycal;
+ unsigned long dly_val;
+ unsigned long max_pass_length;
+ unsigned long current_pass_length;
+ unsigned long current_fail_length;
+ unsigned long current_start;
+ long max_end;
+ unsigned char fail_found;
+ unsigned char pass_found;
+#if !defined(CONFIG_DDR_RQDC_FIXED)
+ u32 rqdc_reg;
+ u32 rqfd;
+ u32 rqfd_start;
+ u32 rqfd_average;
+ int loopi = 0;
+ char str[] = "Auto calibration -";
+ char slash[] = "\\|/-\\|/-";
+
+ /*------------------------------------------------------------------
+ * Test to determine the best read clock delay tuning bits.
+ *
+ * Before the DDR controller can be used, the read clock delay needs to be
+ * set. This is SDRAM_RQDC[RQFD] and SDRAM_RFDC[RFFD].
+ * This value cannot be hardcoded into the program because it changes
+ * depending on the board's setup and environment.
+ * To do this, all delay values are tested to see if they
+ * work or not. By doing this, you get groups of fails with groups of
+ * passing values. The idea is to find the start and end of a passing
+ * window and take the center of it to use as the read clock delay.
+ *
+ * A failure has to be seen first so that when we hit a pass, we know
+ * that it is truely the start of the window. If we get passing values
+ * to start off with, we don't know if we are at the start of the window.
+ *
+ * The code assumes that a failure will always be found.
+ * If a failure is not found, there is no easy way to get the middle
+ * of the passing window. I guess we can pretty much pick any value
+ * but some values will be better than others. Since the lowest speed
+ * we can clock the DDR interface at is 200 MHz (2x 100 MHz PLB speed),
+ * from experimentation it is safe to say you will always have a failure.
+ *-----------------------------------------------------------------*/
+
+ /* first fix RQDC[RQFD] to an average of 80 degre phase shift to find RFDC[RFFD] */
+ rqfd_start = 64; /* test-only: don't know if this is the _best_ start value */
+
+ puts(str);
+
+calibration_loop:
+ mfsdram(SDRAM_RQDC, rqdc_reg);
+ mtsdram(SDRAM_RQDC, (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) |
+ SDRAM_RQDC_RQFD_ENCODE(rqfd_start));
+#else /* CONFIG_DDR_RQDC_FIXED */
+ /*
+ * On Katmai the complete auto-calibration somehow doesn't seem to
+ * produce the best results, meaning optimal values for RQFD/RFFD.
+ * This was discovered by GDA using a high bandwidth scope,
+ * analyzing the DDR2 signals. GDA provided a fixed value for RQFD,
+ * so now on Katmai "only" RFFD is auto-calibrated.
+ */
+ mtsdram(SDRAM_RQDC, CONFIG_DDR_RQDC_FIXED);
+#endif /* CONFIG_DDR_RQDC_FIXED */
+
+ max_start = 0;
+ min_end = 0;
+ begin_rqfd[0] = 0;
+ begin_rffd[0] = 0;
+ begin_rqfd[1] = 0;
+ begin_rffd[1] = 0;
+ end_rqfd[0] = 0;
+ end_rffd[0] = 0;
+ end_rqfd[1] = 0;
+ end_rffd[1] = 0;
+ window_found = FALSE;
+
+ max_pass_length = 0;
+ max_start = 0;
+ max_end = 0;
+ current_pass_length = 0;
+ current_fail_length = 0;
+ current_start = 0;
+ window_found = FALSE;
+ fail_found = FALSE;
+ pass_found = FALSE;
+
+ /*
+ * get the delay line calibration register value
+ */
+ mfsdram(SDRAM_DLCR, dlycal);
+ dly_val = SDRAM_DLYCAL_DLCV_DECODE(dlycal) << 2;
+
+ for (rffd = 0; rffd <= SDRAM_RFDC_RFFD_MAX; rffd++) {
+ mfsdram(SDRAM_RFDC, rfdc_reg);
+ rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK);
+
+ /*------------------------------------------------------------------
+ * Set the timing reg for the test.
+ *-----------------------------------------------------------------*/
+ mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd));
+
+ /*------------------------------------------------------------------
+ * See if the rffd value passed.
+ *-----------------------------------------------------------------*/
+ if (short_mem_test()) {
+ if (fail_found == TRUE) {
+ pass_found = TRUE;
+ if (current_pass_length == 0)
+ current_start = rffd;
+
+ current_fail_length = 0;
+ current_pass_length++;
+
+ if (current_pass_length > max_pass_length) {
+ max_pass_length = current_pass_length;
+ max_start = current_start;
+ max_end = rffd;
+ }
+ }
+ } else {
+ current_pass_length = 0;
+ current_fail_length++;
+
+ if (current_fail_length >= (dly_val >> 2)) {
+ if (fail_found == FALSE) {
+ fail_found = TRUE;
+ } else if (pass_found == TRUE) {
+ window_found = TRUE;
+ break;
+ }
+ }
+ }
+ } /* for rffd */
+
+ /*------------------------------------------------------------------
+ * Set the average RFFD value
+ *-----------------------------------------------------------------*/
+ rffd_average = ((max_start + max_end) >> 1);
+
+ if (rffd_average < 0)
+ rffd_average = 0;
+
+ if (rffd_average > SDRAM_RFDC_RFFD_MAX)
+ rffd_average = SDRAM_RFDC_RFFD_MAX;
+ /* now fix RFDC[RFFD] found and find RQDC[RQFD] */
+ mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd_average));
+
+#if !defined(CONFIG_DDR_RQDC_FIXED)
+ max_pass_length = 0;
+ max_start = 0;
+ max_end = 0;
+ current_pass_length = 0;
+ current_fail_length = 0;
+ current_start = 0;
+ window_found = FALSE;
+ fail_found = FALSE;
+ pass_found = FALSE;
+
+ for (rqfd = 0; rqfd <= SDRAM_RQDC_RQFD_MAX; rqfd++) {
+ mfsdram(SDRAM_RQDC, rqdc_reg);
+ rqdc_reg &= ~(SDRAM_RQDC_RQFD_MASK);
+
+ /*------------------------------------------------------------------
+ * Set the timing reg for the test.
+ *-----------------------------------------------------------------*/
+ mtsdram(SDRAM_RQDC, rqdc_reg | SDRAM_RQDC_RQFD_ENCODE(rqfd));
+
+ /*------------------------------------------------------------------
+ * See if the rffd value passed.
+ *-----------------------------------------------------------------*/
+ if (short_mem_test()) {
+ if (fail_found == TRUE) {
+ pass_found = TRUE;
+ if (current_pass_length == 0)
+ current_start = rqfd;
+
+ current_fail_length = 0;
+ current_pass_length++;
+
+ if (current_pass_length > max_pass_length) {
+ max_pass_length = current_pass_length;
+ max_start = current_start;
+ max_end = rqfd;
+ }
+ }
+ } else {
+ current_pass_length = 0;
+ current_fail_length++;
+
+ if (fail_found == FALSE) {
+ fail_found = TRUE;
+ } else if (pass_found == TRUE) {
+ window_found = TRUE;
+ break;
+ }
+ }
+ }
+
+ rqfd_average = ((max_start + max_end) >> 1);
+
+ /*------------------------------------------------------------------
+ * Make sure we found the valid read passing window. Halt if not
+ *-----------------------------------------------------------------*/
+ if (window_found == FALSE) {
+ if (rqfd_start < SDRAM_RQDC_RQFD_MAX) {
+ putc('\b');
+ putc(slash[loopi++ % 8]);
+
+ /* try again from with a different RQFD start value */
+ rqfd_start++;
+ goto calibration_loop;
+ }
+
+ printf("\nERROR: Cannot determine a common read delay for the "
+ "DIMM(s) installed.\n");
+ debug("%s[%d] ERROR : \n", __FUNCTION__,__LINE__);
+ ppc4xx_ibm_ddr2_register_dump();
+ spd_ddr_init_hang ();
+ }
+
+ if (rqfd_average < 0)
+ rqfd_average = 0;
+
+ if (rqfd_average > SDRAM_RQDC_RQFD_MAX)
+ rqfd_average = SDRAM_RQDC_RQFD_MAX;
+
+ mtsdram(SDRAM_RQDC,
+ (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) |
+ SDRAM_RQDC_RQFD_ENCODE(rqfd_average));
+
+ blank_string(strlen(str));
+#endif /* CONFIG_DDR_RQDC_FIXED */
+
+ /*
+ * Now complete RDSS configuration as mentioned on page 7 of the AMCC
+ * PowerPC440SP/SPe DDR2 application note:
+ * "DDR1/DDR2 Initialization Sequence and Dynamic Tuning"
+ */
+ mfsdram(SDRAM_RTSR, val);
+ if ((val & SDRAM_RTSR_TRK1SM_MASK) == SDRAM_RTSR_TRK1SM_ATPLS1) {
+ mfsdram(SDRAM_RDCC, val);
+ if ((val & SDRAM_RDCC_RDSS_MASK) != SDRAM_RDCC_RDSS_T4) {
+ val += 0x40000000;
+ mtsdram(SDRAM_RDCC, val);
+ }
+ }
+
+ mfsdram(SDRAM_DLCR, val);
+ debug("%s[%d] DLCR: 0x%08lX\n", __FUNCTION__, __LINE__, val);
+ mfsdram(SDRAM_RQDC, val);
+ debug("%s[%d] RQDC: 0x%08lX\n", __FUNCTION__, __LINE__, val);
+ mfsdram(SDRAM_RFDC, val);
+ debug("%s[%d] RFDC: 0x%08lX\n", __FUNCTION__, __LINE__, val);
+ mfsdram(SDRAM_RDCC, val);
+ debug("%s[%d] RDCC: 0x%08lX\n", __FUNCTION__, __LINE__, val);
+}
+#else /* calibration test with hardvalues */
+/*-----------------------------------------------------------------------------+
+ * DQS_calibration_process.
+ *-----------------------------------------------------------------------------*/
+static void test(void)
+{
+ unsigned long dimm_num;
+ unsigned long ecc_temp;
+ unsigned long i, j;
+ unsigned long *membase;
+ unsigned long bxcf[MAXRANKS];
+ unsigned long val;
+ char window_found;
+ char begin_found[MAXDIMMS];
+ char end_found[MAXDIMMS];
+ char search_end[MAXDIMMS];
+ unsigned long test[NUMMEMTESTS][NUMMEMWORDS] = {
+ {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF},
+ {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000},
+ {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555},
+ {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA},
+ {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A},
+ {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5},
+ {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA},
+ {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+ 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55} };
+
+ /*------------------------------------------------------------------
+ * Test to determine the best read clock delay tuning bits.
+ *
+ * Before the DDR controller can be used, the read clock delay needs to be
+ * set. This is SDRAM_RQDC[RQFD] and SDRAM_RFDC[RFFD].
+ * This value cannot be hardcoded into the program because it changes
+ * depending on the board's setup and environment.
+ * To do this, all delay values are tested to see if they
+ * work or not. By doing this, you get groups of fails with groups of
+ * passing values. The idea is to find the start and end of a passing
+ * window and take the center of it to use as the read clock delay.
+ *
+ * A failure has to be seen first so that when we hit a pass, we know
+ * that it is truely the start of the window. If we get passing values
+ * to start off with, we don't know if we are at the start of the window.
+ *
+ * The code assumes that a failure will always be found.
+ * If a failure is not found, there is no easy way to get the middle
+ * of the passing window. I guess we can pretty much pick any value
+ * but some values will be better than others. Since the lowest speed
+ * we can clock the DDR interface at is 200 MHz (2x 100 MHz PLB speed),
+ * from experimentation it is safe to say you will always have a failure.
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_MCOPT1, ecc_temp);
+ ecc_temp &= SDRAM_MCOPT1_MCHK_MASK;
+ mfsdram(SDRAM_MCOPT1, val);
+ mtsdram(SDRAM_MCOPT1, (val & ~SDRAM_MCOPT1_MCHK_MASK) |
+ SDRAM_MCOPT1_MCHK_NON);
+
+ window_found = FALSE;
+ begin_found[0] = FALSE;
+ end_found[0] = FALSE;
+ search_end[0] = FALSE;
+ begin_found[1] = FALSE;
+ end_found[1] = FALSE;
+ search_end[1] = FALSE;
+
+ for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) {
+ mfsdram(SDRAM_MB0CF + (bxcr_num << 2), bxcf[bxcr_num]);
+
+ /* Banks enabled */
+ if ((bxcf[dimm_num] & SDRAM_BXCF_M_BE_MASK) == SDRAM_BXCF_M_BE_ENABLE) {
+
+ /* Bank is enabled */
+ membase =
+ (unsigned long*)(SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+dimm_num)));
+
+ /*------------------------------------------------------------------
+ * Run the short memory test.
+ *-----------------------------------------------------------------*/
+ for (i = 0; i < NUMMEMTESTS; i++) {
+ for (j = 0; j < NUMMEMWORDS; j++) {
+ membase[j] = test[i][j];
+ ppcDcbf((u32)&(membase[j]));
+ }
+ sync();
+ for (j = 0; j < NUMMEMWORDS; j++) {
+ if (membase[j] != test[i][j]) {
+ ppcDcbf((u32)&(membase[j]));
+ break;
+ }
+ ppcDcbf((u32)&(membase[j]));
+ }
+ sync();
+ if (j < NUMMEMWORDS)
+ break;
+ }
+
+ /*------------------------------------------------------------------
+ * See if the rffd value passed.
+ *-----------------------------------------------------------------*/
+ if (i < NUMMEMTESTS) {
+ if ((end_found[dimm_num] == FALSE) &&
+ (search_end[dimm_num] == TRUE)) {
+ end_found[dimm_num] = TRUE;
+ }
+ if ((end_found[0] == TRUE) &&
+ (end_found[1] == TRUE))
+ break;
+ } else {
+ if (begin_found[dimm_num] == FALSE) {
+ begin_found[dimm_num] = TRUE;
+ search_end[dimm_num] = TRUE;
+ }
+ }
+ } else {
+ begin_found[dimm_num] = TRUE;
+ end_found[dimm_num] = TRUE;
+ }
+ }
+
+ if ((begin_found[0] == TRUE) && (begin_found[1] == TRUE))
+ window_found = TRUE;
+
+ /*------------------------------------------------------------------
+ * Make sure we found the valid read passing window. Halt if not
+ *-----------------------------------------------------------------*/
+ if (window_found == FALSE) {
+ printf("ERROR: Cannot determine a common read delay for the "
+ "DIMM(s) installed.\n");
+ spd_ddr_init_hang ();
+ }
+
+ /*------------------------------------------------------------------
+ * Restore the ECC variable to what it originally was
+ *-----------------------------------------------------------------*/
+ mtsdram(SDRAM_MCOPT1,
+ (ppcMfdcr_sdram(SDRAM_MCOPT1) & ~SDRAM_MCOPT1_MCHK_MASK)
+ | ecc_temp);
+}
+#endif /* !HARD_CODED_DQS */
+#endif /* !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) */
+
+#else /* CONFIG_SPD_EEPROM */
+
+/*-----------------------------------------------------------------------------
+ * Function: initdram
+ * Description: Configures the PPC4xx IBM DDR1/DDR2 SDRAM memory controller.
+ * The configuration is performed using static, compile-
+ * time parameters.
+ * Configures the PPC405EX(r) and PPC460EX/GT
+ *---------------------------------------------------------------------------*/
+phys_size_t initdram(int board_type)
+{
+ /*
+ * Only run this SDRAM init code once. For NAND booting
+ * targets like Kilauea, we call initdram() early from the
+ * 4k NAND booting image (CONFIG_NAND_SPL) from nand_boot().
+ * Later on the NAND U-Boot image runs (CONFIG_NAND_U_BOOT)
+ * which calls initdram() again. This time the controller
+ * mustn't be reconfigured again since we're already running
+ * from SDRAM.
+ */
+#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+ unsigned long val;
+
+#if defined(CONFIG_440)
+ mtdcr(SDRAM_R0BAS, CONFIG_SYS_SDRAM_R0BAS);
+ mtdcr(SDRAM_R1BAS, CONFIG_SYS_SDRAM_R1BAS);
+ mtdcr(SDRAM_R2BAS, CONFIG_SYS_SDRAM_R2BAS);
+ mtdcr(SDRAM_R3BAS, CONFIG_SYS_SDRAM_R3BAS);
+ mtdcr(SDRAM_PLBADDULL, CONFIG_SYS_SDRAM_PLBADDULL); /* MQ0_BAUL */
+ mtdcr(SDRAM_PLBADDUHB, CONFIG_SYS_SDRAM_PLBADDUHB); /* MQ0_BAUH */
+ mtdcr(SDRAM_CONF1LL, CONFIG_SYS_SDRAM_CONF1LL);
+ mtdcr(SDRAM_CONF1HB, CONFIG_SYS_SDRAM_CONF1HB);
+ mtdcr(SDRAM_CONFPATHB, CONFIG_SYS_SDRAM_CONFPATHB);
+#endif
+
+ /* Set Memory Bank Configuration Registers */
+
+ mtsdram(SDRAM_MB0CF, CONFIG_SYS_SDRAM0_MB0CF);
+ mtsdram(SDRAM_MB1CF, CONFIG_SYS_SDRAM0_MB1CF);
+ mtsdram(SDRAM_MB2CF, CONFIG_SYS_SDRAM0_MB2CF);
+ mtsdram(SDRAM_MB3CF, CONFIG_SYS_SDRAM0_MB3CF);
+
+ /* Set Memory Clock Timing Register */
+
+ mtsdram(SDRAM_CLKTR, CONFIG_SYS_SDRAM0_CLKTR);
+
+ /* Set Refresh Time Register */
+
+ mtsdram(SDRAM_RTR, CONFIG_SYS_SDRAM0_RTR);
+
+ /* Set SDRAM Timing Registers */
+
+ mtsdram(SDRAM_SDTR1, CONFIG_SYS_SDRAM0_SDTR1);
+ mtsdram(SDRAM_SDTR2, CONFIG_SYS_SDRAM0_SDTR2);
+ mtsdram(SDRAM_SDTR3, CONFIG_SYS_SDRAM0_SDTR3);
+
+ /* Set Mode and Extended Mode Registers */
+
+ mtsdram(SDRAM_MMODE, CONFIG_SYS_SDRAM0_MMODE);
+ mtsdram(SDRAM_MEMODE, CONFIG_SYS_SDRAM0_MEMODE);
+
+ /* Set Memory Controller Options 1 Register */
+
+ mtsdram(SDRAM_MCOPT1, CONFIG_SYS_SDRAM0_MCOPT1);
+
+ /* Set Manual Initialization Control Registers */
+
+ mtsdram(SDRAM_INITPLR0, CONFIG_SYS_SDRAM0_INITPLR0);
+ mtsdram(SDRAM_INITPLR1, CONFIG_SYS_SDRAM0_INITPLR1);
+ mtsdram(SDRAM_INITPLR2, CONFIG_SYS_SDRAM0_INITPLR2);
+ mtsdram(SDRAM_INITPLR3, CONFIG_SYS_SDRAM0_INITPLR3);
+ mtsdram(SDRAM_INITPLR4, CONFIG_SYS_SDRAM0_INITPLR4);
+ mtsdram(SDRAM_INITPLR5, CONFIG_SYS_SDRAM0_INITPLR5);
+ mtsdram(SDRAM_INITPLR6, CONFIG_SYS_SDRAM0_INITPLR6);
+ mtsdram(SDRAM_INITPLR7, CONFIG_SYS_SDRAM0_INITPLR7);
+ mtsdram(SDRAM_INITPLR8, CONFIG_SYS_SDRAM0_INITPLR8);
+ mtsdram(SDRAM_INITPLR9, CONFIG_SYS_SDRAM0_INITPLR9);
+ mtsdram(SDRAM_INITPLR10, CONFIG_SYS_SDRAM0_INITPLR10);
+ mtsdram(SDRAM_INITPLR11, CONFIG_SYS_SDRAM0_INITPLR11);
+ mtsdram(SDRAM_INITPLR12, CONFIG_SYS_SDRAM0_INITPLR12);
+ mtsdram(SDRAM_INITPLR13, CONFIG_SYS_SDRAM0_INITPLR13);
+ mtsdram(SDRAM_INITPLR14, CONFIG_SYS_SDRAM0_INITPLR14);
+ mtsdram(SDRAM_INITPLR15, CONFIG_SYS_SDRAM0_INITPLR15);
+
+ /* Set On-Die Termination Registers */
+
+ mtsdram(SDRAM_CODT, CONFIG_SYS_SDRAM0_CODT);
+ mtsdram(SDRAM_MODT0, CONFIG_SYS_SDRAM0_MODT0);
+ mtsdram(SDRAM_MODT1, CONFIG_SYS_SDRAM0_MODT1);
+
+ /* Set Write Timing Register */
+
+ mtsdram(SDRAM_WRDTR, CONFIG_SYS_SDRAM0_WRDTR);
+
+ /*
+ * Start Initialization by SDRAM0_MCOPT2[SREN] = 0 and
+ * SDRAM0_MCOPT2[IPTR] = 1
+ */
+
+ mtsdram(SDRAM_MCOPT2, (SDRAM_MCOPT2_SREN_EXIT |
+ SDRAM_MCOPT2_IPTR_EXECUTE));
+
+ /*
+ * Poll SDRAM0_MCSTAT[MIC] for assertion to indicate the
+ * completion of initialization.
+ */
+
+ do {
+ mfsdram(SDRAM_MCSTAT, val);
+ } while ((val & SDRAM_MCSTAT_MIC_MASK) != SDRAM_MCSTAT_MIC_COMP);
+
+ /* Set Delay Control Registers */
+
+ mtsdram(SDRAM_DLCR, CONFIG_SYS_SDRAM0_DLCR);
+
+#if !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
+ mtsdram(SDRAM_RDCC, CONFIG_SYS_SDRAM0_RDCC);
+ mtsdram(SDRAM_RQDC, CONFIG_SYS_SDRAM0_RQDC);
+ mtsdram(SDRAM_RFDC, CONFIG_SYS_SDRAM0_RFDC);
+#endif /* !CONFIG_PPC4xx_DDR_AUTOCALIBRATION */
+
+ /*
+ * Enable Controller by SDRAM0_MCOPT2[DCEN] = 1:
+ */
+
+ mfsdram(SDRAM_MCOPT2, val);
+ mtsdram(SDRAM_MCOPT2, val | SDRAM_MCOPT2_DCEN_ENABLE);
+
+#if defined(CONFIG_440)
+ /*
+ * Program TLB entries with caches enabled, for best performace
+ * while auto-calibrating and ECC generation
+ */
+ program_tlb(0, 0, (CONFIG_SYS_MBYTES_SDRAM << 20), 0);
+#endif
+
+#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+ /*------------------------------------------------------------------
+ | DQS calibration.
+ +-----------------------------------------------------------------*/
+ DQS_autocalibration();
+#endif /* !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) */
+#endif /* CONFIG_PPC4xx_DDR_AUTOCALIBRATION */
+
+#if defined(CONFIG_DDR_ECC)
+ do_program_ecc(0);
+#endif /* defined(CONFIG_DDR_ECC) */
+
+#if defined(CONFIG_440)
+ /*
+ * Now after initialization (auto-calibration and ECC generation)
+ * remove the TLB entries with caches enabled and program again with
+ * desired cache functionality
+ */
+ remove_tlb(0, (CONFIG_SYS_MBYTES_SDRAM << 20));
+ program_tlb(0, 0, (CONFIG_SYS_MBYTES_SDRAM << 20), MY_TLB_WORD2_I_ENABLE);
+#endif
+
+ ppc4xx_ibm_ddr2_register_dump();
+
+#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
+ /*
+ * Clear potential errors resulting from auto-calibration.
+ * If not done, then we could get an interrupt later on when
+ * exceptions are enabled.
+ */
+ set_mcsr(get_mcsr());
+#endif /* CONFIG_PPC4xx_DDR_AUTOCALIBRATION */
+
+#endif /* !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) */
+
+ return (CONFIG_SYS_MBYTES_SDRAM << 20);
+}
+#endif /* CONFIG_SPD_EEPROM */
+
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#if defined(CONFIG_440)
+u32 mfdcr_any(u32 dcr)
+{
+ u32 val;
+
+ switch (dcr) {
+ case SDRAM_R0BAS + 0:
+ val = mfdcr(SDRAM_R0BAS + 0);
+ break;
+ case SDRAM_R0BAS + 1:
+ val = mfdcr(SDRAM_R0BAS + 1);
+ break;
+ case SDRAM_R0BAS + 2:
+ val = mfdcr(SDRAM_R0BAS + 2);
+ break;
+ case SDRAM_R0BAS + 3:
+ val = mfdcr(SDRAM_R0BAS + 3);
+ break;
+ default:
+ printf("DCR %d not defined in case statement!!!\n", dcr);
+ val = 0; /* just to satisfy the compiler */
+ }
+
+ return val;
+}
+
+void mtdcr_any(u32 dcr, u32 val)
+{
+ switch (dcr) {
+ case SDRAM_R0BAS + 0:
+ mtdcr(SDRAM_R0BAS + 0, val);
+ break;
+ case SDRAM_R0BAS + 1:
+ mtdcr(SDRAM_R0BAS + 1, val);
+ break;
+ case SDRAM_R0BAS + 2:
+ mtdcr(SDRAM_R0BAS + 2, val);
+ break;
+ case SDRAM_R0BAS + 3:
+ mtdcr(SDRAM_R0BAS + 3, val);
+ break;
+ default:
+ printf("DCR %d not defined in case statement!!!\n", dcr);
+ }
+}
+#endif /* defined(CONFIG_440) */
+#endif /* !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) */
+
+inline void ppc4xx_ibm_ddr2_register_dump(void)
+{
+#if defined(DEBUG)
+ printf("\nPPC4xx IBM DDR2 Register Dump:\n");
+
+#if (defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT))
+ PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R0BAS);
+ PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R1BAS);
+ PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R2BAS);
+ PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R3BAS);
+#endif /* (defined(CONFIG_440SP) || ... */
+#if defined(CONFIG_405EX)
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(BESR);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(BEARL);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(BEARH);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(WMIRQ);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(PLBOPT);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(PUABA);
+#endif /* defined(CONFIG_405EX) */
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MB0CF);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MB1CF);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MB2CF);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MB3CF);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MCSTAT);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MCOPT1);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MCOPT2);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MODT0);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MODT1);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MODT2);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MODT3);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(CODT);
+#if (defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT))
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(VVPR);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(OPARS);
+ /*
+ * OPART is only used as a trigger register.
+ *
+ * No data is contained in this register, and reading or writing
+ * to is can cause bad things to happen (hangs). Just skip it and
+ * report "N/A".
+ */
+ printf("%20s = N/A\n", "SDRAM_OPART");
+#endif /* defined(CONFIG_440SP) || ... */
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(RTR);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR0);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR1);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR2);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR3);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR4);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR5);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR6);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR7);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR8);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR9);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR10);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR11);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR12);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR13);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR14);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR15);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(RQDC);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(RFDC);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(RDCC);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(DLCR);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(CLKTR);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(WRDTR);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(SDTR1);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(SDTR2);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(SDTR3);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MMODE);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(MEMODE);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(ECCES);
+#if (defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT))
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(CID);
+#endif /* defined(CONFIG_440SP) || ... */
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(RID);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(FCSR);
+ PPC4xx_IBM_DDR2_DUMP_REGISTER(RTSR);
+#endif /* defined(DEBUG) */
+}
+
+#endif /* CONFIG_SDRAM_PPC4xx_IBM_DDR2 */
diff --git a/arch/ppc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c b/arch/ppc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
new file mode 100644
index 0000000..7263071
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
@@ -0,0 +1,1251 @@
+/*
+ * arch/ppc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
+ * This SPD SDRAM detection code supports AMCC PPC44x cpu's with a
+ * DDR2 controller (non Denali Core). Those currently are:
+ *
+ * 405: 405EX
+ * 440/460: 440SP/440SPe/460EX/460GT/460SX
+ *
+ * (C) Copyright 2008 Applied Micro Circuits Corporation
+ * Adam Graham <agraham@amcc.com>
+ *
+ * (C) Copyright 2007-2008
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * COPYRIGHT AMCC CORPORATION 2004
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/* define DEBUG for debugging output (obviously ;-)) */
+#undef DEBUG
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+#include "ecc.h"
+
+#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
+
+/*
+ * Only compile the DDR auto-calibration code for NOR boot and
+ * not for NAND boot (NAND SPL and NAND U-Boot - NUB)
+ */
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+
+#define MAXBXCF 4
+#define SDRAM_RXBAS_SHIFT_1M 20
+
+#if defined(CONFIG_SYS_DECREMENT_PATTERNS)
+#define NUMMEMTESTS 24
+#else
+#define NUMMEMTESTS 8
+#endif /* CONFIG_SYS_DECREMENT_PATTERNS */
+#define NUMLOOPS 1 /* configure as you deem approporiate */
+#define NUMMEMWORDS 16
+
+#define SDRAM_RDCC_RDSS_VAL(n) SDRAM_RDCC_RDSS_DECODE(ddr_rdss_opt(n))
+
+/* Private Structure Definitions */
+
+struct autocal_regs {
+ u32 rffd;
+ u32 rqfd;
+};
+
+struct ddrautocal {
+ u32 rffd;
+ u32 rffd_min;
+ u32 rffd_max;
+ u32 rffd_size;
+ u32 rqfd;
+ u32 rqfd_size;
+ u32 rdcc;
+ u32 flags;
+};
+
+struct sdram_timing {
+ u32 wrdtr;
+ u32 clktr;
+};
+
+struct sdram_timing_clks {
+ u32 wrdtr;
+ u32 clktr;
+ u32 rdcc;
+ u32 flags;
+};
+
+struct autocal_clks {
+ struct sdram_timing_clks clocks;
+ struct ddrautocal autocal;
+};
+
+/*--------------------------------------------------------------------------+
+ * Prototypes
+ *--------------------------------------------------------------------------*/
+#if defined(CONFIG_PPC4xx_DDR_METHOD_A)
+static u32 DQS_calibration_methodA(struct ddrautocal *);
+static u32 program_DQS_calibration_methodA(struct ddrautocal *);
+#else
+static u32 DQS_calibration_methodB(struct ddrautocal *);
+static u32 program_DQS_calibration_methodB(struct ddrautocal *);
+#endif
+static int short_mem_test(u32 *);
+
+/*
+ * To provide an interface for board specific config values in this common
+ * DDR setup code, we implement he "weak" default functions here. They return
+ * the default value back to the caller.
+ *
+ * Please see include/configs/yucca.h for an example fora board specific
+ * implementation.
+ */
+
+#if !defined(CONFIG_SPD_EEPROM)
+u32 __ddr_wrdtr(u32 default_val)
+{
+ return default_val;
+}
+u32 ddr_wrdtr(u32) __attribute__((weak, alias("__ddr_wrdtr")));
+
+u32 __ddr_clktr(u32 default_val)
+{
+ return default_val;
+}
+u32 ddr_clktr(u32) __attribute__((weak, alias("__ddr_clktr")));
+
+/*
+ * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed
+ */
+void __spd_ddr_init_hang(void)
+{
+ hang();
+}
+void
+spd_ddr_init_hang(void) __attribute__((weak, alias("__spd_ddr_init_hang")));
+#endif /* defined(CONFIG_SPD_EEPROM) */
+
+ulong __ddr_scan_option(ulong default_val)
+{
+ return default_val;
+}
+ulong ddr_scan_option(ulong) __attribute__((weak, alias("__ddr_scan_option")));
+
+u32 __ddr_rdss_opt(u32 default_val)
+{
+ return default_val;
+}
+u32 ddr_rdss_opt(ulong) __attribute__((weak, alias("__ddr_rdss_opt")));
+
+
+static u32 *get_membase(int bxcr_num)
+{
+ ulong bxcf;
+ u32 *membase;
+
+#if defined(SDRAM_R0BAS)
+ /* BAS from Memory Queue rank reg. */
+ membase =
+ (u32 *)(SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+bxcr_num)));
+ bxcf = 0; /* just to satisfy the compiler */
+#else
+ /* BAS from SDRAM_MBxCF mem rank reg. */
+ mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf);
+ membase = (u32 *)((bxcf & 0xfff80000) << 3);
+#endif
+
+ return membase;
+}
+
+static inline void ecc_clear_status_reg(void)
+{
+ mtsdram(SDRAM_ECCES, 0xffffffff);
+#if defined(SDRAM_R0BAS)
+ mtdcr(SDRAM_ERRSTATLL, 0xffffffff);
+#endif
+}
+
+/*
+ * Reset and relock memory DLL after SDRAM_CLKTR change
+ */
+static inline void relock_memory_DLL(void)
+{
+ u32 reg;
+
+ mtsdram(SDRAM_MCOPT2, SDRAM_MCOPT2_IPTR_EXECUTE);
+
+ do {
+ mfsdram(SDRAM_MCSTAT, reg);
+ } while (!(reg & SDRAM_MCSTAT_MIC_COMP));
+
+ mfsdram(SDRAM_MCOPT2, reg);
+ mtsdram(SDRAM_MCOPT2, reg | SDRAM_MCOPT2_DCEN_ENABLE);
+}
+
+static int ecc_check_status_reg(void)
+{
+ u32 ecc_status;
+
+ /*
+ * Compare suceeded, now check
+ * if got ecc error. If got an
+ * ecc error, then don't count
+ * this as a passing value
+ */
+ mfsdram(SDRAM_ECCES, ecc_status);
+ if (ecc_status != 0x00000000) {
+ /* clear on error */
+ ecc_clear_status_reg();
+ /* ecc check failure */
+ return 0;
+ }
+ ecc_clear_status_reg();
+ sync();
+
+ return 1;
+}
+
+/* return 1 if passes, 0 if fail */
+static int short_mem_test(u32 *base_address)
+{
+ int i, j, l;
+ u32 ecc_mode = 0;
+
+ ulong test[NUMMEMTESTS][NUMMEMWORDS] = {
+ /* 0 */ {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF},
+ /* 1 */ {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000},
+ /* 2 */ {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555},
+ /* 3 */ {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA},
+ /* 4 */ {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A},
+ /* 5 */ {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5},
+ /* 6 */ {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA},
+ /* 7 */ {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+ 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+ 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+ 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55},
+
+#if defined(CONFIG_SYS_DECREMENT_PATTERNS)
+ /* 8 */ {0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff},
+ /* 9 */ {0xfffefffe, 0xfffefffe, 0xfffefffe, 0xfffefffe,
+ 0xfffefffe, 0xfffefffe, 0xfffefffe, 0xfffefffe,
+ 0xfffefffe, 0xfffefffe, 0xfffefffe, 0xfffefffe,
+ 0xfffefffe, 0xfffefffe, 0xfffefffe, 0xfffefffe},
+ /* 10 */{0xfffdfffd, 0xfffdfffd, 0xfffdffff, 0xfffdfffd,
+ 0xfffdfffd, 0xfffdfffd, 0xfffdffff, 0xfffdfffd,
+ 0xfffdfffd, 0xfffdfffd, 0xfffdffff, 0xfffdfffd,
+ 0xfffdfffd, 0xfffdfffd, 0xfffdffff, 0xfffdfffd},
+ /* 11 */{0xfffcfffc, 0xfffcfffc, 0xfffcfffc, 0xfffcfffc,
+ 0xfffcfffc, 0xfffcfffc, 0xfffcfffc, 0xfffcfffc,
+ 0xfffcfffc, 0xfffcfffc, 0xfffcfffc, 0xfffcfffc,
+ 0xfffcfffc, 0xfffcfffc, 0xfffcfffc, 0xfffcfffc},
+ /* 12 */{0xfffbfffb, 0xfffffffb, 0xfffffffb, 0xfffffffb,
+ 0xfffbfffb, 0xfffffffb, 0xfffffffb, 0xfffffffb,
+ 0xfffbfffb, 0xfffffffb, 0xfffffffb, 0xfffffffb,
+ 0xfffbfffb, 0xfffffffb, 0xfffffffb, 0xfffffffb},
+ /* 13 */{0xfffafffa, 0xfffafffa, 0xfffffffa, 0xfffafffa,
+ 0xfffafffa, 0xfffafffa, 0xfffafffa, 0xfffafffa,
+ 0xfffafffa, 0xfffafffa, 0xfffafffa, 0xfffafffa,
+ 0xfffafffa, 0xfffafffa, 0xfffafffa, 0xfffafffa},
+ /* 14 */{0xfff9fff9, 0xfff9fff9, 0xfff9fff9, 0xfff9fff9,
+ 0xfff9fff9, 0xfff9fff9, 0xfff9fff9, 0xfff9fff9,
+ 0xfff9fff9, 0xfff9fff9, 0xfff9fff9, 0xfff9fff9,
+ 0xfff9fff9, 0xfff9fff9, 0xfff9fff9, 0xfff9fff9},
+ /* 15 */{0xfff8fff8, 0xfff8fff8, 0xfff8fff8, 0xfff8fff8,
+ 0xfff8fff8, 0xfff8fff8, 0xfff8fff8, 0xfff8fff8,
+ 0xfff8fff8, 0xfff8fff8, 0xfff8fff8, 0xfff8fff8,
+ 0xfff8fff8, 0xfff8fff8, 0xfff8fff8, 0xfff8fff8},
+ /* 16 */{0xfff7fff7, 0xfff7ffff, 0xfff7fff7, 0xfff7fff7,
+ 0xfff7fff7, 0xfff7ffff, 0xfff7fff7, 0xfff7fff7,
+ 0xfff7fff7, 0xfff7ffff, 0xfff7fff7, 0xfff7fff7,
+ 0xfff7ffff, 0xfff7ffff, 0xfff7fff7, 0xfff7fff7},
+ /* 17 */{0xfff6fff5, 0xfff6ffff, 0xfff6fff6, 0xfff6fff7,
+ 0xfff6fff5, 0xfff6ffff, 0xfff6fff6, 0xfff6fff7,
+ 0xfff6fff5, 0xfff6ffff, 0xfff6fff6, 0xfff6fff7,
+ 0xfff6fff5, 0xfff6ffff, 0xfff6fff6, 0xfff6fff7},
+ /* 18 */{0xfff5fff4, 0xfff5ffff, 0xfff5fff5, 0xfff5fff5,
+ 0xfff5fff4, 0xfff5ffff, 0xfff5fff5, 0xfff5fff5,
+ 0xfff5fff4, 0xfff5ffff, 0xfff5fff5, 0xfff5fff5,
+ 0xfff5fff4, 0xfff5ffff, 0xfff5fff5, 0xfff5fff5},
+ /* 19 */{0xfff4fff3, 0xfff4ffff, 0xfff4fff4, 0xfff4fff4,
+ 0xfff4fff3, 0xfff4ffff, 0xfff4fff4, 0xfff4fff4,
+ 0xfff4fff3, 0xfff4ffff, 0xfff4fff4, 0xfff4fff4,
+ 0xfff4fff3, 0xfff4ffff, 0xfff4fff4, 0xfff4fff4},
+ /* 20 */{0xfff3fff2, 0xfff3ffff, 0xfff3fff3, 0xfff3fff3,
+ 0xfff3fff2, 0xfff3ffff, 0xfff3fff3, 0xfff3fff3,
+ 0xfff3fff2, 0xfff3ffff, 0xfff3fff3, 0xfff3fff3,
+ 0xfff3fff2, 0xfff3ffff, 0xfff3fff3, 0xfff3fff3},
+ /* 21 */{0xfff2ffff, 0xfff2ffff, 0xfff2fff2, 0xfff2fff2,
+ 0xfff2ffff, 0xfff2ffff, 0xfff2fff2, 0xfff2fff2,
+ 0xfff2ffff, 0xfff2ffff, 0xfff2fff2, 0xfff2fff2,
+ 0xfff2ffff, 0xfff2ffff, 0xfff2fff2, 0xfff2fff2},
+ /* 22 */{0xfff1ffff, 0xfff1ffff, 0xfff1fff1, 0xfff1fff1,
+ 0xfff1ffff, 0xfff1ffff, 0xfff1fff1, 0xfff1fff1,
+ 0xfff1ffff, 0xfff1ffff, 0xfff1fff1, 0xfff1fff1,
+ 0xfff1ffff, 0xfff1ffff, 0xfff1fff1, 0xfff1fff1},
+ /* 23 */{0xfff0fff0, 0xfff0fff0, 0xfff0fff0, 0xfff0fff0,
+ 0xfff0fff0, 0xfff0fff0, 0xfff0fff0, 0xfff0fff0,
+ 0xfff0fff0, 0xfff0fff0, 0xfff0fff0, 0xfff0fff0,
+ 0xfff0fff0, 0xfff0fffe, 0xfff0fff0, 0xfff0fff0},
+#endif /* CONFIG_SYS_DECREMENT_PATTERNS */
+ };
+
+ mfsdram(SDRAM_MCOPT1, ecc_mode);
+ if ((ecc_mode & SDRAM_MCOPT1_MCHK_CHK_REP) ==
+ SDRAM_MCOPT1_MCHK_CHK_REP) {
+ ecc_clear_status_reg();
+ sync();
+ ecc_mode = 1;
+ } else {
+ ecc_mode = 0;
+ }
+
+ /*
+ * Run the short memory test.
+ */
+ for (i = 0; i < NUMMEMTESTS; i++) {
+ for (j = 0; j < NUMMEMWORDS; j++) {
+ base_address[j] = test[i][j];
+ ppcDcbf((ulong)&(base_address[j]));
+ }
+ sync();
+ iobarrier_rw();
+ for (l = 0; l < NUMLOOPS; l++) {
+ for (j = 0; j < NUMMEMWORDS; j++) {
+ if (base_address[j] != test[i][j]) {
+ ppcDcbf((u32)&(base_address[j]));
+ return 0;
+ } else {
+ if (ecc_mode) {
+ if (!ecc_check_status_reg())
+ return 0;
+ }
+ }
+ ppcDcbf((u32)&(base_address[j]));
+ } /* for (j = 0; j < NUMMEMWORDS; j++) */
+ sync();
+ iobarrier_rw();
+ } /* for (l=0; l<NUMLOOPS; l++) */
+ }
+
+ return 1;
+}
+
+#if defined(CONFIG_PPC4xx_DDR_METHOD_A)
+/*-----------------------------------------------------------------------------+
+| program_DQS_calibration_methodA.
++-----------------------------------------------------------------------------*/
+static u32 program_DQS_calibration_methodA(struct ddrautocal *ddrcal)
+{
+ u32 pass_result = 0;
+
+#ifdef DEBUG
+ ulong temp;
+
+ mfsdram(SDRAM_RDCC, temp);
+ debug("<%s>SDRAM_RDCC=0x%08x\n", __func__, temp);
+#endif
+
+ pass_result = DQS_calibration_methodA(ddrcal);
+
+ return pass_result;
+}
+
+/*
+ * DQS_calibration_methodA()
+ *
+ * Autocalibration Method A
+ *
+ * ARRAY [Entire DQS Range] DQS_Valid_Window ; initialized to all zeros
+ * ARRAY [Entire FDBK Range] FDBK_Valid_Window; initialized to all zeros
+ * MEMWRITE(addr, expected_data);
+ * for (i = 0; i < Entire DQS Range; i++) { RQDC.RQFD
+ * for (j = 0; j < Entire FDBK Range; j++) { RFDC.RFFD
+ * MEMREAD(addr, actual_data);
+ * if (actual_data == expected_data) {
+ * DQS_Valid_Window[i] = 1; RQDC.RQFD
+ * FDBK_Valid_Window[i][j] = 1; RFDC.RFFD
+ * }
+ * }
+ * }
+ */
+static u32 DQS_calibration_methodA(struct ddrautocal *cal)
+{
+ ulong rfdc_reg;
+ ulong rffd;
+
+ ulong rqdc_reg;
+ ulong rqfd;
+
+ u32 *membase;
+ ulong bxcf;
+ int rqfd_average;
+ int bxcr_num;
+ int rffd_average;
+ int pass;
+ u32 passed = 0;
+
+ int in_window;
+ struct autocal_regs curr_win_min;
+ struct autocal_regs curr_win_max;
+ struct autocal_regs best_win_min;
+ struct autocal_regs best_win_max;
+ struct autocal_regs loop_win_min;
+ struct autocal_regs loop_win_max;
+
+#ifdef DEBUG
+ ulong temp;
+#endif
+ ulong rdcc;
+
+ char slash[] = "\\|/-\\|/-";
+ int loopi = 0;
+
+ /* start */
+ in_window = 0;
+
+ memset(&curr_win_min, 0, sizeof(curr_win_min));
+ memset(&curr_win_max, 0, sizeof(curr_win_max));
+ memset(&best_win_min, 0, sizeof(best_win_min));
+ memset(&best_win_max, 0, sizeof(best_win_max));
+ memset(&loop_win_min, 0, sizeof(loop_win_min));
+ memset(&loop_win_max, 0, sizeof(loop_win_max));
+
+ rdcc = 0;
+
+ /*
+ * Program RDCC register
+ * Read sample cycle auto-update enable
+ */
+ mtsdram(SDRAM_RDCC,
+ ddr_rdss_opt(SDRAM_RDCC_RDSS_T2) | SDRAM_RDCC_RSAE_ENABLE);
+
+#ifdef DEBUG
+ mfsdram(SDRAM_RDCC, temp);
+ debug("<%s>SDRAM_RDCC=0x%x\n", __func__, temp);
+ mfsdram(SDRAM_RTSR, temp);
+ debug("<%s>SDRAM_RTSR=0x%x\n", __func__, temp);
+ mfsdram(SDRAM_FCSR, temp);
+ debug("<%s>SDRAM_FCSR=0x%x\n", __func__, temp);
+#endif
+
+ /*
+ * Program RQDC register
+ * Internal DQS delay mechanism enable
+ */
+ mtsdram(SDRAM_RQDC,
+ SDRAM_RQDC_RQDE_ENABLE | SDRAM_RQDC_RQFD_ENCODE(0x00));
+
+#ifdef DEBUG
+ mfsdram(SDRAM_RQDC, temp);
+ debug("<%s>SDRAM_RQDC=0x%x\n", __func__, temp);
+#endif
+
+ /*
+ * Program RFDC register
+ * Set Feedback Fractional Oversample
+ * Auto-detect read sample cycle enable
+ */
+ mtsdram(SDRAM_RFDC, SDRAM_RFDC_ARSE_ENABLE |
+ SDRAM_RFDC_RFOS_ENCODE(0) | SDRAM_RFDC_RFFD_ENCODE(0));
+
+#ifdef DEBUG
+ mfsdram(SDRAM_RFDC, temp);
+ debug("<%s>SDRAM_RFDC=0x%x\n", __func__, temp);
+#endif
+
+ putc(' ');
+ for (rqfd = 0; rqfd <= SDRAM_RQDC_RQFD_MAX; rqfd++) {
+
+ mfsdram(SDRAM_RQDC, rqdc_reg);
+ rqdc_reg &= ~(SDRAM_RQDC_RQFD_MASK);
+ mtsdram(SDRAM_RQDC, rqdc_reg | SDRAM_RQDC_RQFD_ENCODE(rqfd));
+
+ putc('\b');
+ putc(slash[loopi++ % 8]);
+
+ curr_win_min.rffd = 0;
+ curr_win_max.rffd = 0;
+ in_window = 0;
+
+ for (rffd = 0, pass = 0; rffd <= SDRAM_RFDC_RFFD_MAX; rffd++) {
+ mfsdram(SDRAM_RFDC, rfdc_reg);
+ rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK);
+ mtsdram(SDRAM_RFDC,
+ rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd));
+
+ for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) {
+ mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf);
+
+ /* Banks enabled */
+ if (bxcf & SDRAM_BXCF_M_BE_MASK) {
+ /* Bank is enabled */
+ membase = get_membase(bxcr_num);
+ pass = short_mem_test(membase);
+ } /* if bank enabled */
+ } /* for bxcr_num */
+
+ /* If this value passed update RFFD windows */
+ if (pass && !in_window) { /* at the start of window */
+ in_window = 1;
+ curr_win_min.rffd = curr_win_max.rffd = rffd;
+ curr_win_min.rqfd = curr_win_max.rqfd = rqfd;
+ mfsdram(SDRAM_RDCC, rdcc); /*record this value*/
+ } else if (!pass && in_window) { /* at end of window */
+ in_window = 0;
+ } else if (pass && in_window) { /* within the window */
+ curr_win_max.rffd = rffd;
+ curr_win_max.rqfd = rqfd;
+ }
+ /* else if (!pass && !in_window)
+ skip - no pass, not currently in a window */
+
+ if (in_window) {
+ if ((curr_win_max.rffd - curr_win_min.rffd) >
+ (best_win_max.rffd - best_win_min.rffd)) {
+ best_win_min.rffd = curr_win_min.rffd;
+ best_win_max.rffd = curr_win_max.rffd;
+
+ best_win_min.rqfd = curr_win_min.rqfd;
+ best_win_max.rqfd = curr_win_max.rqfd;
+ cal->rdcc = rdcc;
+ }
+ passed = 1;
+ }
+ } /* RFDC.RFFD */
+
+ /*
+ * save-off the best window results of the RFDC.RFFD
+ * for this RQDC.RQFD setting
+ */
+ /*
+ * if (just ended RFDC.RFDC loop pass window) >
+ * (prior RFDC.RFFD loop pass window)
+ */
+ if ((best_win_max.rffd - best_win_min.rffd) >
+ (loop_win_max.rffd - loop_win_min.rffd)) {
+ loop_win_min.rffd = best_win_min.rffd;
+ loop_win_max.rffd = best_win_max.rffd;
+ loop_win_min.rqfd = rqfd;
+ loop_win_max.rqfd = rqfd;
+ debug("RQFD.min 0x%08x, RQFD.max 0x%08x, "
+ "RFFD.min 0x%08x, RFFD.max 0x%08x\n",
+ loop_win_min.rqfd, loop_win_max.rqfd,
+ loop_win_min.rffd, loop_win_max.rffd);
+ }
+ } /* RQDC.RQFD */
+
+ putc('\b');
+
+ debug("\n");
+
+ if ((loop_win_min.rffd == 0) && (loop_win_max.rffd == 0) &&
+ (best_win_min.rffd == 0) && (best_win_max.rffd == 0) &&
+ (best_win_min.rqfd == 0) && (best_win_max.rqfd == 0)) {
+ passed = 0;
+ }
+
+ /*
+ * Need to program RQDC before RFDC.
+ */
+ debug("<%s> RQFD Min: 0x%x\n", __func__, loop_win_min.rqfd);
+ debug("<%s> RQFD Max: 0x%x\n", __func__, loop_win_max.rqfd);
+ rqfd_average = loop_win_max.rqfd;
+
+ if (rqfd_average < 0)
+ rqfd_average = 0;
+
+ if (rqfd_average > SDRAM_RQDC_RQFD_MAX)
+ rqfd_average = SDRAM_RQDC_RQFD_MAX;
+
+ debug("<%s> RFFD average: 0x%08x\n", __func__, rqfd_average);
+ mtsdram(SDRAM_RQDC, (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) |
+ SDRAM_RQDC_RQFD_ENCODE(rqfd_average));
+
+ debug("<%s> RFFD Min: 0x%08x\n", __func__, loop_win_min.rffd);
+ debug("<%s> RFFD Max: 0x%08x\n", __func__, loop_win_max.rffd);
+ rffd_average = ((loop_win_min.rffd + loop_win_max.rffd) / 2);
+
+ if (rffd_average < 0)
+ rffd_average = 0;
+
+ if (rffd_average > SDRAM_RFDC_RFFD_MAX)
+ rffd_average = SDRAM_RFDC_RFFD_MAX;
+
+ debug("<%s> RFFD average: 0x%08x\n", __func__, rffd_average);
+ mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd_average));
+
+ /* if something passed, then return the size of the largest window */
+ if (passed != 0) {
+ passed = loop_win_max.rffd - loop_win_min.rffd;
+ cal->rqfd = rqfd_average;
+ cal->rffd = rffd_average;
+ cal->rffd_min = loop_win_min.rffd;
+ cal->rffd_max = loop_win_max.rffd;
+ }
+
+ return (u32)passed;
+}
+
+#else /* !defined(CONFIG_PPC4xx_DDR_METHOD_A) */
+
+/*-----------------------------------------------------------------------------+
+| program_DQS_calibration_methodB.
++-----------------------------------------------------------------------------*/
+static u32 program_DQS_calibration_methodB(struct ddrautocal *ddrcal)
+{
+ u32 pass_result = 0;
+
+#ifdef DEBUG
+ ulong temp;
+#endif
+
+ /*
+ * Program RDCC register
+ * Read sample cycle auto-update enable
+ */
+ mtsdram(SDRAM_RDCC,
+ ddr_rdss_opt(SDRAM_RDCC_RDSS_T2) | SDRAM_RDCC_RSAE_ENABLE);
+
+#ifdef DEBUG
+ mfsdram(SDRAM_RDCC, temp);
+ debug("<%s>SDRAM_RDCC=0x%08x\n", __func__, temp);
+#endif
+
+ /*
+ * Program RQDC register
+ * Internal DQS delay mechanism enable
+ */
+ mtsdram(SDRAM_RQDC,
+#if defined(CONFIG_DDR_RQDC_START_VAL)
+ SDRAM_RQDC_RQDE_ENABLE |
+ SDRAM_RQDC_RQFD_ENCODE(CONFIG_DDR_RQDC_START_VAL));
+#else
+ SDRAM_RQDC_RQDE_ENABLE | SDRAM_RQDC_RQFD_ENCODE(0x38));
+#endif
+
+#ifdef DEBUG
+ mfsdram(SDRAM_RQDC, temp);
+ debug("<%s>SDRAM_RQDC=0x%08x\n", __func__, temp);
+#endif
+
+ /*
+ * Program RFDC register
+ * Set Feedback Fractional Oversample
+ * Auto-detect read sample cycle enable
+ */
+ mtsdram(SDRAM_RFDC, SDRAM_RFDC_ARSE_ENABLE |
+ SDRAM_RFDC_RFOS_ENCODE(0) |
+ SDRAM_RFDC_RFFD_ENCODE(0));
+
+#ifdef DEBUG
+ mfsdram(SDRAM_RFDC, temp);
+ debug("<%s>SDRAM_RFDC=0x%08x\n", __func__, temp);
+#endif
+
+ pass_result = DQS_calibration_methodB(ddrcal);
+
+ return pass_result;
+}
+
+/*
+ * DQS_calibration_methodB()
+ *
+ * Autocalibration Method B
+ *
+ * ARRAY [Entire DQS Range] DQS_Valid_Window ; initialized to all zeros
+ * ARRAY [Entire Feedback Range] FDBK_Valid_Window; initialized to all zeros
+ * MEMWRITE(addr, expected_data);
+ * Initialialize the DQS delay to 80 degrees (MCIF0_RRQDC[RQFD]=0x38).
+ *
+ * for (j = 0; j < Entire Feedback Range; j++) {
+ * MEMREAD(addr, actual_data);
+ * if (actual_data == expected_data) {
+ * FDBK_Valid_Window[j] = 1;
+ * }
+ * }
+ *
+ * Set MCIF0_RFDC[RFFD] to the middle of the FDBK_Valid_Window.
+ *
+ * for (i = 0; i < Entire DQS Range; i++) {
+ * MEMREAD(addr, actual_data);
+ * if (actual_data == expected_data) {
+ * DQS_Valid_Window[i] = 1;
+ * }
+ * }
+ *
+ * Set MCIF0_RRQDC[RQFD] to the middle of the DQS_Valid_Window.
+ */
+/*-----------------------------------------------------------------------------+
+| DQS_calibration_methodB.
++-----------------------------------------------------------------------------*/
+static u32 DQS_calibration_methodB(struct ddrautocal *cal)
+{
+ ulong rfdc_reg;
+ ulong rffd;
+
+ ulong rqdc_reg;
+ ulong rqfd;
+
+ ulong rdcc;
+
+ u32 *membase;
+ ulong bxcf;
+ int rqfd_average;
+ int bxcr_num;
+ int rffd_average;
+ int pass;
+ uint passed = 0;
+
+ int in_window;
+ u32 curr_win_min, curr_win_max;
+ u32 best_win_min, best_win_max;
+ u32 size = 0;
+
+ /*------------------------------------------------------------------
+ | Test to determine the best read clock delay tuning bits.
+ |
+ | Before the DDR controller can be used, the read clock delay needs to
+ | be set. This is SDRAM_RQDC[RQFD] and SDRAM_RFDC[RFFD].
+ | This value cannot be hardcoded into the program because it changes
+ | depending on the board's setup and environment.
+ | To do this, all delay values are tested to see if they
+ | work or not. By doing this, you get groups of fails with groups of
+ | passing values. The idea is to find the start and end of a passing
+ | window and take the center of it to use as the read clock delay.
+ |
+ | A failure has to be seen first so that when we hit a pass, we know
+ | that it is truely the start of the window. If we get passing values
+ | to start off with, we don't know if we are at the start of the window
+ |
+ | The code assumes that a failure will always be found.
+ | If a failure is not found, there is no easy way to get the middle
+ | of the passing window. I guess we can pretty much pick any value
+ | but some values will be better than others. Since the lowest speed
+ | we can clock the DDR interface at is 200 MHz (2x 100 MHz PLB speed),
+ | from experimentation it is safe to say you will always have a failure
+ +-----------------------------------------------------------------*/
+
+ debug("\n\n");
+
+ in_window = 0;
+ rdcc = 0;
+
+ curr_win_min = curr_win_max = 0;
+ best_win_min = best_win_max = 0;
+ for (rffd = 0; rffd <= SDRAM_RFDC_RFFD_MAX; rffd++) {
+ mfsdram(SDRAM_RFDC, rfdc_reg);
+ rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK);
+ mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd));
+
+ pass = 1;
+ for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) {
+ mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf);
+
+ /* Banks enabled */
+ if (bxcf & SDRAM_BXCF_M_BE_MASK) {
+ /* Bank is enabled */
+ membase = get_membase(bxcr_num);
+ pass &= short_mem_test(membase);
+ } /* if bank enabled */
+ } /* for bxcf_num */
+
+ /* If this value passed */
+ if (pass && !in_window) { /* start of passing window */
+ in_window = 1;
+ curr_win_min = curr_win_max = rffd;
+ mfsdram(SDRAM_RDCC, rdcc); /* record this value */
+ } else if (!pass && in_window) { /* end passing window */
+ in_window = 0;
+ } else if (pass && in_window) { /* within the passing window */
+ curr_win_max = rffd;
+ }
+
+ if (in_window) {
+ if ((curr_win_max - curr_win_min) >
+ (best_win_max - best_win_min)) {
+ best_win_min = curr_win_min;
+ best_win_max = curr_win_max;
+ cal->rdcc = rdcc;
+ }
+ passed = 1;
+ }
+ } /* for rffd */
+
+ if ((best_win_min == 0) && (best_win_max == 0))
+ passed = 0;
+ else
+ size = best_win_max - best_win_min;
+
+ debug("RFFD Min: 0x%x\n", best_win_min);
+ debug("RFFD Max: 0x%x\n", best_win_max);
+ rffd_average = ((best_win_min + best_win_max) / 2);
+
+ cal->rffd_min = best_win_min;
+ cal->rffd_max = best_win_max;
+
+ if (rffd_average < 0)
+ rffd_average = 0;
+
+ if (rffd_average > SDRAM_RFDC_RFFD_MAX)
+ rffd_average = SDRAM_RFDC_RFFD_MAX;
+
+ mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd_average));
+
+ rffd = rffd_average;
+ in_window = 0;
+
+ curr_win_min = curr_win_max = 0;
+ best_win_min = best_win_max = 0;
+ for (rqfd = 0; rqfd <= SDRAM_RQDC_RQFD_MAX; rqfd++) {
+ mfsdram(SDRAM_RQDC, rqdc_reg);
+ rqdc_reg &= ~(SDRAM_RQDC_RQFD_MASK);
+ mtsdram(SDRAM_RQDC, rqdc_reg | SDRAM_RQDC_RQFD_ENCODE(rqfd));
+
+ pass = 1;
+ for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) {
+
+ mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf);
+
+ /* Banks enabled */
+ if (bxcf & SDRAM_BXCF_M_BE_MASK) {
+ /* Bank is enabled */
+ membase = get_membase(bxcr_num);
+ pass &= short_mem_test(membase);
+ } /* if bank enabled */
+ } /* for bxcf_num */
+
+ /* If this value passed */
+ if (pass && !in_window) {
+ in_window = 1;
+ curr_win_min = curr_win_max = rqfd;
+ } else if (!pass && in_window) {
+ in_window = 0;
+ } else if (pass && in_window) {
+ curr_win_max = rqfd;
+ }
+
+ if (in_window) {
+ if ((curr_win_max - curr_win_min) >
+ (best_win_max - best_win_min)) {
+ best_win_min = curr_win_min;
+ best_win_max = curr_win_max;
+ }
+ passed = 1;
+ }
+ } /* for rqfd */
+
+ if ((best_win_min == 0) && (best_win_max == 0))
+ passed = 0;
+
+ debug("RQFD Min: 0x%x\n", best_win_min);
+ debug("RQFD Max: 0x%x\n", best_win_max);
+ rqfd_average = ((best_win_min + best_win_max) / 2);
+
+ if (rqfd_average < 0)
+ rqfd_average = 0;
+
+ if (rqfd_average > SDRAM_RQDC_RQFD_MAX)
+ rqfd_average = SDRAM_RQDC_RQFD_MAX;
+
+ mtsdram(SDRAM_RQDC, (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) |
+ SDRAM_RQDC_RQFD_ENCODE(rqfd_average));
+
+ mfsdram(SDRAM_RQDC, rqdc_reg);
+ mfsdram(SDRAM_RFDC, rfdc_reg);
+
+ /*
+ * Need to program RQDC before RFDC. The value is read above.
+ * That is the reason why auto cal not work.
+ * See, comments below.
+ */
+ mtsdram(SDRAM_RQDC, rqdc_reg);
+ mtsdram(SDRAM_RFDC, rfdc_reg);
+
+ debug("RQDC: 0x%08X\n", rqdc_reg);
+ debug("RFDC: 0x%08X\n", rfdc_reg);
+
+ /* if something passed, then return the size of the largest window */
+ if (passed != 0) {
+ passed = size;
+ cal->rqfd = rqfd_average;
+ cal->rffd = rffd_average;
+ }
+
+ return (uint)passed;
+}
+#endif /* defined(CONFIG_PPC4xx_DDR_METHOD_A) */
+
+/*
+ * Default table for DDR auto-calibration of all
+ * possible WRDTR and CLKTR values.
+ * Table format is:
+ * {SDRAM_WRDTR.[WDTR], SDRAM_CLKTR.[CKTR]}
+ *
+ * Table is terminated with {-1, -1} value pair.
+ *
+ * Board vendors can specify their own board specific subset of
+ * known working {SDRAM_WRDTR.[WDTR], SDRAM_CLKTR.[CKTR]} value
+ * pairs via a board defined ddr_scan_option() function.
+ */
+struct sdram_timing full_scan_options[] = {
+ {0, 0}, {0, 1}, {0, 2}, {0, 3},
+ {1, 0}, {1, 1}, {1, 2}, {1, 3},
+ {2, 0}, {2, 1}, {2, 2}, {2, 3},
+ {3, 0}, {3, 1}, {3, 2}, {3, 3},
+ {4, 0}, {4, 1}, {4, 2}, {4, 3},
+ {5, 0}, {5, 1}, {5, 2}, {5, 3},
+ {6, 0}, {6, 1}, {6, 2}, {6, 3},
+ {-1, -1}
+};
+
+/*---------------------------------------------------------------------------+
+| DQS_calibration.
++----------------------------------------------------------------------------*/
+u32 DQS_autocalibration(void)
+{
+ u32 wdtr;
+ u32 clkp;
+ u32 result = 0;
+ u32 best_result = 0;
+ u32 best_rdcc;
+ struct ddrautocal ddrcal;
+ struct autocal_clks tcal;
+ ulong rfdc_reg;
+ ulong rqdc_reg;
+ u32 val;
+ int verbose_lvl = 0;
+ char *str;
+ char slash[] = "\\|/-\\|/-";
+ int loopi = 0;
+ struct sdram_timing *scan_list;
+
+#if defined(DEBUG_PPC4xx_DDR_AUTOCALIBRATION)
+ int i;
+ char tmp[64]; /* long enough for environment variables */
+#endif
+
+ memset(&tcal, 0, sizeof(tcal));
+
+ ddr_scan_option((ulong)full_scan_options);
+
+ scan_list =
+ (struct sdram_timing *)ddr_scan_option((ulong)full_scan_options);
+
+ mfsdram(SDRAM_MCOPT1, val);
+ if ((val & SDRAM_MCOPT1_MCHK_CHK_REP) == SDRAM_MCOPT1_MCHK_CHK_REP)
+ str = "ECC Auto calibration -";
+ else
+ str = "Auto calibration -";
+
+ puts(str);
+
+#if defined(DEBUG_PPC4xx_DDR_AUTOCALIBRATION)
+ i = getenv_r("autocalib", tmp, sizeof(tmp));
+ if (i < 0)
+ strcpy(tmp, CONFIG_AUTOCALIB);
+
+ if (strcmp(tmp, "final") == 0) {
+ /* display the final autocalibration results only */
+ verbose_lvl = 1;
+ } else if (strcmp(tmp, "loop") == 0) {
+ /* display summary autocalibration info per iteration */
+ verbose_lvl = 2;
+ } else if (strcmp(tmp, "display") == 0) {
+ /* display full debug autocalibration window info. */
+ verbose_lvl = 3;
+ }
+#endif /* (DEBUG_PPC4xx_DDR_AUTOCALIBRATION) */
+
+ best_rdcc = (SDRAM_RDCC_RDSS_T4 >> 30);
+
+ while ((scan_list->wrdtr != -1) && (scan_list->clktr != -1)) {
+ wdtr = scan_list->wrdtr;
+ clkp = scan_list->clktr;
+
+ mfsdram(SDRAM_WRDTR, val);
+ val &= ~(SDRAM_WRDTR_LLWP_MASK | SDRAM_WRDTR_WTR_MASK);
+ mtsdram(SDRAM_WRDTR, (val |
+ ddr_wrdtr(SDRAM_WRDTR_LLWP_1_CYC | (wdtr << 25))));
+
+ mtsdram(SDRAM_CLKTR, clkp << 30);
+
+ relock_memory_DLL();
+
+ putc('\b');
+ putc(slash[loopi++ % 8]);
+
+#ifdef DEBUG
+ debug("\n");
+ debug("*** --------------\n");
+ mfsdram(SDRAM_WRDTR, val);
+ debug("*** SDRAM_WRDTR set to 0x%08x\n", val);
+ mfsdram(SDRAM_CLKTR, val);
+ debug("*** SDRAM_CLKTR set to 0x%08x\n", val);
+#endif
+
+ debug("\n");
+ if (verbose_lvl > 2) {
+ printf("*** SDRAM_WRDTR (wdtr) set to %d\n", wdtr);
+ printf("*** SDRAM_CLKTR (clkp) set to %d\n", clkp);
+ }
+
+ memset(&ddrcal, 0, sizeof(ddrcal));
+
+ /*
+ * DQS calibration.
+ */
+ /*
+ * program_DQS_calibration_method[A|B]() returns 0 if no
+ * passing RFDC.[RFFD] window is found or returns the size
+ * of the best passing window; in the case of a found passing
+ * window, the ddrcal will contain the values of the best
+ * window RQDC.[RQFD] and RFDC.[RFFD].
+ */
+
+ /*
+ * Call PPC4xx SDRAM DDR autocalibration methodA or methodB.
+ * Default is methodB.
+ * Defined the autocalibration method in the board specific
+ * header file.
+ * Please see include/configs/kilauea.h for an example for
+ * a board specific implementation.
+ */
+#if defined(CONFIG_PPC4xx_DDR_METHOD_A)
+ result = program_DQS_calibration_methodA(&ddrcal);
+#else
+ result = program_DQS_calibration_methodB(&ddrcal);
+#endif
+
+ sync();
+
+ /*
+ * Clear potential errors resulting from auto-calibration.
+ * If not done, then we could get an interrupt later on when
+ * exceptions are enabled.
+ */
+ set_mcsr(get_mcsr());
+
+ val = ddrcal.rdcc; /* RDCC from the best passing window */
+
+ udelay(100);
+
+ if (verbose_lvl > 1) {
+ char *tstr;
+ switch ((val >> 30)) {
+ case 0:
+ if (result != 0)
+ tstr = "T1";
+ else
+ tstr = "N/A";
+ break;
+ case 1:
+ tstr = "T2";
+ break;
+ case 2:
+ tstr = "T3";
+ break;
+ case 3:
+ tstr = "T4";
+ break;
+ default:
+ tstr = "unknown";
+ break;
+ }
+ printf("** WRDTR(%d) CLKTR(%d), Wind (%d), best (%d), "
+ "max-min(0x%04x)(0x%04x), RDCC: %s\n",
+ wdtr, clkp, result, best_result,
+ ddrcal.rffd_min, ddrcal.rffd_max, tstr);
+ }
+
+ /*
+ * The DQS calibration "result" is either "0"
+ * if no passing window was found, or is the
+ * size of the RFFD passing window.
+ */
+ /*
+ * want the lowest Read Sample Cycle Select
+ */
+ val = SDRAM_RDCC_RDSS_DECODE(val);
+ debug("*** (%d) (%d) current_rdcc, best_rdcc\n",
+ val, best_rdcc);
+
+ if ((result != 0) &&
+ (val >= SDRAM_RDCC_RDSS_VAL(SDRAM_RDCC_RDSS_T2))) {
+ if (((result == best_result) && (val < best_rdcc)) ||
+ ((result > best_result) && (val <= best_rdcc))) {
+ tcal.autocal.flags = 1;
+ debug("*** (%d)(%d) result passed window "
+ "size: 0x%08x, rqfd = 0x%08x, "
+ "rffd = 0x%08x, rdcc = 0x%08x\n",
+ wdtr, clkp, result, ddrcal.rqfd,
+ ddrcal.rffd, ddrcal.rdcc);
+
+ /*
+ * Save the SDRAM_WRDTR and SDRAM_CLKTR
+ * settings for the largest returned
+ * RFFD passing window size.
+ */
+ best_rdcc = val;
+ tcal.clocks.wrdtr = wdtr;
+ tcal.clocks.clktr = clkp;
+ tcal.clocks.rdcc = SDRAM_RDCC_RDSS_ENCODE(val);
+ tcal.autocal.rqfd = ddrcal.rqfd;
+ tcal.autocal.rffd = ddrcal.rffd;
+ best_result = result;
+
+ if (verbose_lvl > 2) {
+ printf("** (%d)(%d) "
+ "best result: 0x%04x\n",
+ wdtr, clkp,
+ best_result);
+ printf("** (%d)(%d) "
+ "best WRDTR: 0x%04x\n",
+ wdtr, clkp,
+ tcal.clocks.wrdtr);
+ printf("** (%d)(%d) "
+ "best CLKTR: 0x%04x\n",
+ wdtr, clkp,
+ tcal.clocks.clktr);
+ printf("** (%d)(%d) "
+ "best RQDC: 0x%04x\n",
+ wdtr, clkp,
+ tcal.autocal.rqfd);
+ printf("** (%d)(%d) "
+ "best RFDC: 0x%04x\n",
+ wdtr, clkp,
+ tcal.autocal.rffd);
+ printf("** (%d)(%d) "
+ "best RDCC: 0x%08x\n",
+ wdtr, clkp,
+ (u32)tcal.clocks.rdcc);
+ mfsdram(SDRAM_RTSR, val);
+ printf("** (%d)(%d) best "
+ "loop RTSR: 0x%08x\n",
+ wdtr, clkp, val);
+ mfsdram(SDRAM_FCSR, val);
+ printf("** (%d)(%d) best "
+ "loop FCSR: 0x%08x\n",
+ wdtr, clkp, val);
+ }
+ }
+ } /* if ((result != 0) && (val >= (ddr_rdss_opt()))) */
+ scan_list++;
+ } /* while ((scan_list->wrdtr != -1) && (scan_list->clktr != -1)) */
+
+ if (tcal.autocal.flags == 1) {
+ if (verbose_lvl > 0) {
+ printf("*** --------------\n");
+ printf("*** best_result window size: %d\n",
+ best_result);
+ printf("*** best_result WRDTR: 0x%04x\n",
+ tcal.clocks.wrdtr);
+ printf("*** best_result CLKTR: 0x%04x\n",
+ tcal.clocks.clktr);
+ printf("*** best_result RQFD: 0x%04x\n",
+ tcal.autocal.rqfd);
+ printf("*** best_result RFFD: 0x%04x\n",
+ tcal.autocal.rffd);
+ printf("*** best_result RDCC: 0x%04x\n",
+ tcal.clocks.rdcc);
+ printf("*** --------------\n");
+ printf("\n");
+ }
+
+ /*
+ * if got best passing result window, then lock in the
+ * best CLKTR, WRDTR, RQFD, and RFFD values
+ */
+ mfsdram(SDRAM_WRDTR, val);
+ mtsdram(SDRAM_WRDTR, (val &
+ ~(SDRAM_WRDTR_LLWP_MASK | SDRAM_WRDTR_WTR_MASK)) |
+ ddr_wrdtr(SDRAM_WRDTR_LLWP_1_CYC |
+ (tcal.clocks.wrdtr << 25)));
+
+ mtsdram(SDRAM_CLKTR, tcal.clocks.clktr << 30);
+
+ relock_memory_DLL();
+
+ mfsdram(SDRAM_RQDC, rqdc_reg);
+ rqdc_reg &= ~(SDRAM_RQDC_RQFD_MASK);
+ mtsdram(SDRAM_RQDC, rqdc_reg |
+ SDRAM_RQDC_RQFD_ENCODE(tcal.autocal.rqfd));
+
+ mfsdram(SDRAM_RQDC, rqdc_reg);
+ debug("*** best_result: read value SDRAM_RQDC 0x%08x\n",
+ rqdc_reg);
+
+ mfsdram(SDRAM_RFDC, rfdc_reg);
+ rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK);
+ mtsdram(SDRAM_RFDC, rfdc_reg |
+ SDRAM_RFDC_RFFD_ENCODE(tcal.autocal.rffd));
+
+ mfsdram(SDRAM_RFDC, rfdc_reg);
+ debug("*** best_result: read value SDRAM_RFDC 0x%08x\n",
+ rfdc_reg);
+ mfsdram(SDRAM_RDCC, val);
+ debug("*** SDRAM_RDCC 0x%08x\n", val);
+ } else {
+ /*
+ * no valid windows were found
+ */
+ printf("DQS memory calibration window can not be determined, "
+ "terminating u-boot.\n");
+ ppc4xx_ibm_ddr2_register_dump();
+ spd_ddr_init_hang();
+ }
+
+ blank_string(strlen(str));
+
+ return 0;
+}
+#else /* defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) */
+u32 DQS_autocalibration(void)
+{
+ return 0;
+}
+#endif /* !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) */
+#endif /* defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) */
diff --git a/arch/ppc/cpu/ppc4xx/4xx_pci.c b/arch/ppc/cpu/ppc4xx/4xx_pci.c
new file mode 100644
index 0000000..eed4534
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/4xx_pci.c
@@ -0,0 +1,873 @@
+/*-----------------------------------------------------------------------------+
+ * This source code is dual-licensed. You may use it under the terms of
+ * the GNU General Public license version 2, or under the license below.
+ *
+ * This source code has been made available to you by IBM on an AS-IS
+ * basis. Anyone receiving this source is licensed under IBM
+ * copyrights to use it in any way he or she deems fit, including
+ * copying it, modifying it, compiling it, and redistributing it either
+ * with or without modifications. No license under IBM patents or
+ * patent applications is to be implied by the copyright license.
+ *
+ * Any user of this software should understand that IBM cannot provide
+ * technical support for this software and will not be responsible for
+ * any consequences resulting from the use of this software.
+ *
+ * Any person who transfers this source code or any derivative work
+ * must include the IBM copyright notice, this paragraph, and the
+ * preceding two paragraphs in the transferred software.
+ *
+ * COPYRIGHT I B M CORPORATION 1995
+ * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
+ *-----------------------------------------------------------------------------*/
+/*----------------------------------------------------------------------------+
+ *
+ * File Name: 405gp_pci.c
+ *
+ * Function: Initialization code for the 405GP PCI Configuration regs.
+ *
+ * Author: Mark Game
+ *
+ * Change Activity-
+ *
+ * Date Description of Change BY
+ * --------- --------------------- ---
+ * 09-Sep-98 Created MCG
+ * 02-Nov-98 Removed External arbiter selected message JWB
+ * 27-Nov-98 Zero out PTMBAR2 and disable in PTM2MS JWB
+ * 04-Jan-99 Zero out other unused PMM and PTM regs. Change bus scan MCG
+ * from (0 to n) to (1 to n).
+ * 17-May-99 Port to Walnut JWB
+ * 17-Jun-99 Updated for VGA support JWB
+ * 21-Jun-99 Updated to allow SRAM region to be a target from PCI bus JWB
+ * 19-Jul-99 Updated for 405GP pass 1 errata #26 (Low PCI subsequent MCG
+ * target latency timer values are not supported).
+ * Should be fixed in pass 2.
+ * 09-Sep-99 Removed use of PTM2 since the SRAM region no longer needs JWB
+ * to be a PCI target. Zero out PTMBAR2 and disable in PTM2MS.
+ * 10-Dec-99 Updated PCI_Write_CFG_Reg for pass2 errata #6 JWB
+ * 11-Jan-00 Ensure PMMxMAs disabled before setting PMMxLAs. This is not
+ * really required after a reset since PMMxMAs are already
+ * disabled but is a good practice nonetheless. JWB
+ * 12-Jun-01 stefan.roese@esd-electronics.com
+ * - PCI host/adapter handling reworked
+ * 09-Jul-01 stefan.roese@esd-electronics.com
+ * - PCI host now configures from device 0 (not 1) to max_dev,
+ * (host configures itself)
+ * - On CPCI-405 pci base address and size is generated from
+ * SDRAM and FLASH size (CFG regs not used anymore)
+ * - Some minor changes for CPCI-405-A (adapter version)
+ * 14-Sep-01 stefan.roese@esd-electronics.com
+ * - CONFIG_PCI_SCAN_SHOW added to print pci devices upon startup
+ * 28-Sep-01 stefan.roese@esd-electronics.com
+ * - Changed pci master configuration for linux compatibility
+ * (no need for bios_fixup() anymore)
+ * 26-Feb-02 stefan.roese@esd-electronics.com
+ * - Bug fixed in pci configuration (Andrew May)
+ * - Removed pci class code init for CPCI405 board
+ * 15-May-02 stefan.roese@esd-electronics.com
+ * - New vga device handling
+ * 29-May-02 stefan.roese@esd-electronics.com
+ * - PCI class code init added (if defined)
+ *----------------------------------------------------------------------------*/
+
+#include <common.h>
+#include <command.h>
+#include <asm/4xx_pci.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <pci.h>
+
+#ifdef CONFIG_PCI
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
+
+#if defined(CONFIG_PMC405)
+ushort pmc405_pci_subsys_deviceid(void);
+#endif
+
+/*#define DEBUG*/
+
+/*
+ * Board-specific pci initialization
+ * Platform code can reimplement pci_pre_init() if needed
+ */
+int __pci_pre_init(struct pci_controller *hose)
+{
+#if defined(CONFIG_405EP)
+ /*
+ * Enable the internal PCI arbiter by default.
+ *
+ * On 405EP CPUs the internal arbiter can be controlled
+ * by the I2C strapping EEPROM. If you want to do so
+ * or if you want to disable the arbiter pci_pre_init()
+ * must be reimplemented without enabling the arbiter.
+ * The arbiter is enabled in this place because of
+ * compatibility reasons.
+ */
+ mtdcr(CPC0_PCI, mfdcr(CPC0_PCI) | CPC0_PCI_ARBIT_EN);
+#endif /* CONFIG_405EP */
+
+ return 1;
+}
+int pci_pre_init(struct pci_controller *hose)
+ __attribute__((weak, alias("__pci_pre_init")));
+
+int __is_pci_host(struct pci_controller *hose)
+{
+#if defined(CONFIG_405GP)
+ if (mfdcr(CPC0_PSR) & PSR_PCI_ARBIT_EN)
+ return 1;
+#elif defined (CONFIG_405EP)
+ if (mfdcr(CPC0_PCI) & CPC0_PCI_ARBIT_EN)
+ return 1;
+#endif
+ return 0;
+}
+int is_pci_host(struct pci_controller *hose) __attribute__((weak, alias("__is_pci_host")));
+
+/*-----------------------------------------------------------------------------+
+ * pci_init. Initializes the 405GP PCI Configuration regs.
+ *-----------------------------------------------------------------------------*/
+void pci_405gp_init(struct pci_controller *hose)
+{
+ int i, reg_num = 0;
+ bd_t *bd = gd->bd;
+
+ unsigned short temp_short;
+ unsigned long ptmpcila[2] = {CONFIG_SYS_PCI_PTM1PCI, CONFIG_SYS_PCI_PTM2PCI};
+#if defined(CONFIG_PCI_4xx_PTM_OVERWRITE)
+ char *ptmla_str, *ptmms_str;
+#endif
+ unsigned long ptmla[2] = {CONFIG_SYS_PCI_PTM1LA, CONFIG_SYS_PCI_PTM2LA};
+ unsigned long ptmms[2] = {CONFIG_SYS_PCI_PTM1MS, CONFIG_SYS_PCI_PTM2MS};
+#if defined(CONFIG_PIP405) || defined (CONFIG_MIP405)
+ unsigned long pmmla[3] = {0x80000000, 0xA0000000, 0};
+ unsigned long pmmma[3] = {0xE0000001, 0xE0000001, 0};
+ unsigned long pmmpcila[3] = {0x80000000, 0x00000000, 0};
+ unsigned long pmmpciha[3] = {0x00000000, 0x00000000, 0};
+#else
+ unsigned long pmmla[3] = {0x80000000, 0,0};
+ unsigned long pmmma[3] = {0xC0000001, 0,0};
+ unsigned long pmmpcila[3] = {0x80000000, 0,0};
+ unsigned long pmmpciha[3] = {0x00000000, 0,0};
+#endif
+#ifdef CONFIG_PCI_PNP
+#if (CONFIG_PCI_HOST == PCI_HOST_AUTO)
+ char *s;
+#endif
+#endif
+
+#if defined(CONFIG_PCI_4xx_PTM_OVERWRITE)
+ ptmla_str = getenv("ptm1la");
+ ptmms_str = getenv("ptm1ms");
+ if(NULL != ptmla_str && NULL != ptmms_str ) {
+ ptmla[0] = simple_strtoul (ptmla_str, NULL, 16);
+ ptmms[0] = simple_strtoul (ptmms_str, NULL, 16);
+ }
+
+ ptmla_str = getenv("ptm2la");
+ ptmms_str = getenv("ptm2ms");
+ if(NULL != ptmla_str && NULL != ptmms_str ) {
+ ptmla[1] = simple_strtoul (ptmla_str, NULL, 16);
+ ptmms[1] = simple_strtoul (ptmms_str, NULL, 16);
+ }
+#endif
+
+ /*
+ * Register the hose
+ */
+ hose->first_busno = 0;
+ hose->last_busno = 0xff;
+
+ /* ISA/PCI I/O space */
+ pci_set_region(hose->regions + reg_num++,
+ MIN_PCI_PCI_IOADDR,
+ MIN_PLB_PCI_IOADDR,
+ 0x10000,
+ PCI_REGION_IO);
+
+ /* PCI I/O space */
+ pci_set_region(hose->regions + reg_num++,
+ 0x00800000,
+ 0xe8800000,
+ 0x03800000,
+ PCI_REGION_IO);
+
+ reg_num = 2;
+
+ /* Memory spaces */
+ for (i=0; i<2; i++)
+ if (ptmms[i] & 1)
+ {
+ if (!i) hose->pci_fb = hose->regions + reg_num;
+
+ pci_set_region(hose->regions + reg_num++,
+ ptmpcila[i], ptmla[i],
+ ~(ptmms[i] & 0xfffff000) + 1,
+ PCI_REGION_MEM |
+ PCI_REGION_SYS_MEMORY);
+ }
+
+ /* PCI memory spaces */
+ for (i=0; i<3; i++)
+ if (pmmma[i] & 1)
+ {
+ pci_set_region(hose->regions + reg_num++,
+ pmmpcila[i], pmmla[i],
+ ~(pmmma[i] & 0xfffff000) + 1,
+ PCI_REGION_MEM);
+ }
+
+ hose->region_count = reg_num;
+
+ pci_setup_indirect(hose,
+ PCICFGADR,
+ PCICFGDATA);
+
+ if (hose->pci_fb)
+ pciauto_region_init(hose->pci_fb);
+
+ /* Let board change/modify hose & do initial checks */
+ if (pci_pre_init(hose) == 0) {
+ printf("PCI: Board-specific initialization failed.\n");
+ printf("PCI: Configuration aborted.\n");
+ return;
+ }
+
+ pci_register_hose(hose);
+
+ /*--------------------------------------------------------------------------+
+ * 405GP PCI Master configuration.
+ * Map one 512 MB range of PLB/processor addresses to PCI memory space.
+ * PLB address 0x80000000-0xBFFFFFFF ==> PCI address 0x80000000-0xBFFFFFFF
+ * Use byte reversed out routines to handle endianess.
+ *--------------------------------------------------------------------------*/
+ out32r(PMM0MA, (pmmma[0]&~0x1)); /* disable, configure PMMxLA, PMMxPCILA first */
+ out32r(PMM0LA, pmmla[0]);
+ out32r(PMM0PCILA, pmmpcila[0]);
+ out32r(PMM0PCIHA, pmmpciha[0]);
+ out32r(PMM0MA, pmmma[0]);
+
+ /*--------------------------------------------------------------------------+
+ * PMM1 is not used. Initialize them to zero.
+ *--------------------------------------------------------------------------*/
+ out32r(PMM1MA, (pmmma[1]&~0x1));
+ out32r(PMM1LA, pmmla[1]);
+ out32r(PMM1PCILA, pmmpcila[1]);
+ out32r(PMM1PCIHA, pmmpciha[1]);
+ out32r(PMM1MA, pmmma[1]);
+
+ /*--------------------------------------------------------------------------+
+ * PMM2 is not used. Initialize them to zero.
+ *--------------------------------------------------------------------------*/
+ out32r(PMM2MA, (pmmma[2]&~0x1));
+ out32r(PMM2LA, pmmla[2]);
+ out32r(PMM2PCILA, pmmpcila[2]);
+ out32r(PMM2PCIHA, pmmpciha[2]);
+ out32r(PMM2MA, pmmma[2]);
+
+ /*--------------------------------------------------------------------------+
+ * 405GP PCI Target configuration. (PTM1)
+ * Note: PTM1MS is hardwire enabled but we set the enable bit anyway.
+ *--------------------------------------------------------------------------*/
+ out32r(PTM1LA, ptmla[0]); /* insert address */
+ out32r(PTM1MS, ptmms[0]); /* insert size, enable bit is 1 */
+ pci_write_config_dword(PCIDEVID_405GP, PCI_BASE_ADDRESS_1, ptmpcila[0]);
+
+ /*--------------------------------------------------------------------------+
+ * 405GP PCI Target configuration. (PTM2)
+ *--------------------------------------------------------------------------*/
+ out32r(PTM2LA, ptmla[1]); /* insert address */
+ pci_write_config_dword(PCIDEVID_405GP, PCI_BASE_ADDRESS_2, ptmpcila[1]);
+
+ if (ptmms[1] == 0)
+ {
+ out32r(PTM2MS, 0x00000001); /* set enable bit */
+ pci_write_config_dword(PCIDEVID_405GP, PCI_BASE_ADDRESS_2, 0x00000000);
+ out32r(PTM2MS, 0x00000000); /* disable */
+ }
+ else
+ {
+ out32r(PTM2MS, ptmms[1]); /* insert size, enable bit is 1 */
+ }
+
+ /*
+ * Insert Subsystem Vendor and Device ID
+ */
+ pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_VENDOR_ID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
+#ifdef CONFIG_CPCI405
+ if (is_pci_host(hose))
+ pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
+ else
+ pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID2);
+#else
+ pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
+#endif
+
+ /*
+ * Insert Class-code
+ */
+#ifdef CONFIG_SYS_PCI_CLASSCODE
+ pci_write_config_word(PCIDEVID_405GP, PCI_CLASS_SUB_CODE, CONFIG_SYS_PCI_CLASSCODE);
+#endif /* CONFIG_SYS_PCI_CLASSCODE */
+
+ /*--------------------------------------------------------------------------+
+ * If PCI speed = 66MHz, set 66MHz capable bit.
+ *--------------------------------------------------------------------------*/
+ if (bd->bi_pci_busfreq >= 66000000) {
+ pci_read_config_word(PCIDEVID_405GP, PCI_STATUS, &temp_short);
+ pci_write_config_word(PCIDEVID_405GP,PCI_STATUS,(temp_short|PCI_STATUS_66MHZ));
+ }
+
+#if (CONFIG_PCI_HOST != PCI_HOST_ADAPTER)
+#if (CONFIG_PCI_HOST == PCI_HOST_AUTO)
+ if (is_pci_host(hose) ||
+ (((s = getenv("pciscan")) != NULL) && (strcmp(s, "yes") == 0)))
+#endif
+ {
+ /*--------------------------------------------------------------------------+
+ * Write the 405GP PCI Configuration regs.
+ * Enable 405GP to be a master on the PCI bus (PMM).
+ * Enable 405GP to act as a PCI memory target (PTM).
+ *--------------------------------------------------------------------------*/
+ pci_read_config_word(PCIDEVID_405GP, PCI_COMMAND, &temp_short);
+ pci_write_config_word(PCIDEVID_405GP, PCI_COMMAND, temp_short |
+ PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+ }
+#endif
+
+#if defined(CONFIG_405EP)
+ /*
+ * on ppc405ep vendor/device id is not set
+ * The user manual says 0x1014 (IBM) / 0x0156 (405GP!)
+ * are the correct values.
+ */
+ pci_write_config_word(PCIDEVID_405GP, PCI_VENDOR_ID, PCI_VENDOR_ID_IBM);
+ pci_write_config_word(PCIDEVID_405GP,
+ PCI_DEVICE_ID, PCI_DEVICE_ID_IBM_405GP);
+#endif
+
+ /*
+ * Set HCE bit (Host Configuration Enabled)
+ */
+ pci_read_config_word(PCIDEVID_405GP, PCIBRDGOPT2, &temp_short);
+ pci_write_config_word(PCIDEVID_405GP, PCIBRDGOPT2, (temp_short | 0x0001));
+
+#ifdef CONFIG_PCI_PNP
+ /*--------------------------------------------------------------------------+
+ * Scan the PCI bus and configure devices found.
+ *--------------------------------------------------------------------------*/
+#if (CONFIG_PCI_HOST == PCI_HOST_AUTO)
+ if (is_pci_host(hose) ||
+ (((s = getenv("pciscan")) != NULL) && (strcmp(s, "yes") == 0)))
+#endif
+ {
+#ifdef CONFIG_PCI_SCAN_SHOW
+ printf("PCI: Bus Dev VenId DevId Class Int\n");
+#endif
+ hose->last_busno = pci_hose_scan(hose);
+ }
+#endif /* CONFIG_PCI_PNP */
+
+}
+
+/*
+ * drivers/pci/pci.c skips every host bridge but the 405GP since it could
+ * be set as an Adapter.
+ *
+ * I (Andrew May) don't know what we should do here, but I don't want
+ * the auto setup of a PCI device disabling what is done pci_405gp_init
+ * as has happened before.
+ */
+void pci_405gp_setup_bridge(struct pci_controller *hose, pci_dev_t dev,
+ struct pci_config_table *entry)
+{
+#ifdef DEBUG
+ printf("405gp_setup_bridge\n");
+#endif
+}
+
+/*
+ *
+ */
+
+void pci_405gp_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
+{
+ unsigned char int_line = 0xff;
+
+ /*
+ * Write pci interrupt line register (cpci405 specific)
+ */
+ switch (PCI_DEV(dev) & 0x03)
+ {
+ case 0:
+ int_line = 27 + 2;
+ break;
+ case 1:
+ int_line = 27 + 3;
+ break;
+ case 2:
+ int_line = 27 + 0;
+ break;
+ case 3:
+ int_line = 27 + 1;
+ break;
+ }
+
+ pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, int_line);
+}
+
+void pci_405gp_setup_vga(struct pci_controller *hose, pci_dev_t dev,
+ struct pci_config_table *entry)
+{
+ unsigned int cmdstat = 0;
+
+ pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_prefetch, hose->pci_io);
+
+ /* always enable io space on vga boards */
+ pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat);
+ cmdstat |= PCI_COMMAND_IO;
+ pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat);
+}
+
+#if !(defined(CONFIG_PIP405) || defined (CONFIG_MIP405)) && !(defined (CONFIG_SC3))
+
+/*
+ *As is these functs get called out of flash Not a horrible
+ *thing, but something to keep in mind. (no statics?)
+ */
+static struct pci_config_table pci_405gp_config_table[] = {
+/*if VendID is 0 it terminates the table search (ie Walnut)*/
+#ifdef CONFIG_SYS_PCI_SUBSYS_VENDORID
+ {CONFIG_SYS_PCI_SUBSYS_VENDORID, PCI_ANY_ID, PCI_CLASS_BRIDGE_HOST,
+ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, pci_405gp_setup_bridge},
+#endif
+ {PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA,
+ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, pci_405gp_setup_vga},
+
+ {PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NOT_DEFINED_VGA,
+ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, pci_405gp_setup_vga},
+
+ { }
+};
+
+static struct pci_controller hose = {
+ fixup_irq: pci_405gp_fixup_irq,
+ config_table: pci_405gp_config_table,
+};
+
+void pci_init_board(void)
+{
+ /*we want the ptrs to RAM not flash (ie don't use init list)*/
+ hose.fixup_irq = pci_405gp_fixup_irq;
+ hose.config_table = pci_405gp_config_table;
+ pci_405gp_init(&hose);
+}
+
+#endif
+
+#endif /* CONFIG_405GP */
+
+/*-----------------------------------------------------------------------------+
+ * CONFIG_440
+ *-----------------------------------------------------------------------------*/
+#if defined(CONFIG_440)
+
+static struct pci_controller ppc440_hose = {0};
+
+/*
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
+ *
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
+ *
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ *
+ * Weak default implementation: "Normal" boards implement the PCI
+ * host functionality. This can be overridden for PCI adapter boards.
+ */
+int __is_pci_host(struct pci_controller *hose)
+{
+ return 1;
+}
+int is_pci_host(struct pci_controller *hose)
+ __attribute__((weak, alias("__is_pci_host")));
+
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440GRX)
+
+#if defined(CONFIG_SYS_PCI_TARGET_INIT)
+/*
+ * pci_target_init
+ *
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ */
+void __pci_target_init(struct pci_controller *hose)
+{
+ /*
+ * Set up Direct MMIO registers
+ */
+
+ /*
+ * PowerPC440 EP PCI Master configuration.
+ * Map one 1Gig range of PLB/processor addresses to PCI memory space.
+ * PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
+ * Use byte reversed out routines to handle endianess.
+ * Make this region non-prefetchable.
+ */
+ /* PMM0 Mask/Attribute - disabled b4 setting */
+ out_le32((void *)PCIL0_PMM0MA, 0x00000000);
+ /* PMM0 Local Address */
+ out_le32((void *)PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);
+ /* PMM0 PCI Low Address */
+ out_le32((void *)PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE);
+ /* PMM0 PCI High Address */
+ out_le32((void *)PCIL0_PMM0PCIHA, 0x00000000);
+ /* 512M + No prefetching, and enable region */
+ out_le32((void *)PCIL0_PMM0MA, 0xE0000001);
+
+ /* PMM1 Mask/Attribute - disabled b4 setting */
+ out_le32((void *)PCIL0_PMM1MA, 0x00000000);
+ /* PMM1 Local Address */
+ out_le32((void *)PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2);
+ /* PMM1 PCI Low Address */
+ out_le32((void *)PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2);
+ /* PMM1 PCI High Address */
+ out_le32((void *)PCIL0_PMM1PCIHA, 0x00000000);
+ /* 512M + No prefetching, and enable region */
+ out_le32((void *)PCIL0_PMM1MA, 0xE0000001);
+
+ out_le32((void *)PCIL0_PTM1MS, 0x00000001); /* Memory Size/Attribute */
+ out_le32((void *)PCIL0_PTM1LA, 0); /* Local Addr. Reg */
+ out_le32((void *)PCIL0_PTM2MS, 0); /* Memory Size/Attribute */
+ out_le32((void *)PCIL0_PTM2LA, 0); /* Local Addr. Reg */
+
+ /*
+ * Set up Configuration registers
+ */
+
+ /* Program the board's subsystem id/vendor id */
+ pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
+ CONFIG_SYS_PCI_SUBSYS_VENDORID);
+ pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID);
+
+ /* Configure command register as bus master */
+ pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
+
+ /* 240nS PCI clock */
+ pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
+
+ /* No error reporting */
+ pci_write_config_word(0, PCI_ERREN, 0);
+
+ pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
+}
+#endif /* CONFIG_SYS_PCI_TARGET_INIT */
+
+/*
+ * pci_pre_init
+ *
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
+ *
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ *
+ */
+int __pci_pre_init(struct pci_controller *hose)
+{
+ u32 reg;
+
+ /*
+ * Set priority for all PLB3 devices to 0.
+ * Set PLB3 arbiter to fair mode.
+ */
+ mfsdr(SD0_AMP1, reg);
+ mtsdr(SD0_AMP1, (reg & 0x000000FF) | 0x0000FF00);
+ reg = mfdcr(PLB3_ACR);
+ mtdcr(PLB3_ACR, reg | 0x80000000);
+
+ /*
+ * Set priority for all PLB4 devices to 0.
+ */
+ mfsdr(SD0_AMP0, reg);
+ mtsdr(SD0_AMP0, (reg & 0x000000FF) | 0x0000FF00);
+ reg = mfdcr(PLB4_ACR) | 0xa0000000;
+ mtdcr(PLB4_ACR, reg);
+
+ /*
+ * Set Nebula PLB4 arbiter to fair mode.
+ */
+ /* Segment0 */
+ reg = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR;
+ reg = (reg & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED;
+ reg = (reg & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP;
+ reg = (reg & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP;
+ mtdcr(PLB0_ACR, reg);
+
+ /* Segment1 */
+ reg = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR;
+ reg = (reg & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED;
+ reg = (reg & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP;
+ reg = (reg & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP;
+ mtdcr(PLB1_ACR, reg);
+
+#if defined(CONFIG_SYS_PCI_BOARD_FIXUP_IRQ)
+ hose->fixup_irq = board_pci_fixup_irq;
+#endif
+
+ return 1;
+}
+
+#else /* defined(CONFIG_440EP) ... */
+
+#if defined(CONFIG_SYS_PCI_TARGET_INIT)
+void __pci_target_init(struct pci_controller * hose)
+{
+ /*
+ * Disable everything
+ */
+ out_le32((void *)PCIL0_PIM0SA, 0); /* disable */
+ out_le32((void *)PCIL0_PIM1SA, 0); /* disable */
+ out_le32((void *)PCIL0_PIM2SA, 0); /* disable */
+ out_le32((void *)PCIL0_EROMBA, 0); /* disable expansion rom */
+
+ /*
+ * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440
+ * strapping options do not support sizes such as 128/256 MB.
+ */
+ out_le32((void *)PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE);
+ out_le32((void *)PCIL0_PIM0LAH, 0);
+ out_le32((void *)PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1);
+ out_le32((void *)PCIL0_BAR0, 0);
+
+ /*
+ * Program the board's subsystem id/vendor id
+ */
+ out_le16((void *)PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
+ out_le16((void *)PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
+
+ out_le16((void *)PCIL0_CMD, in_le16((void *)PCIL0_CMD) |
+ PCI_COMMAND_MEMORY);
+}
+#endif /* CONFIG_SYS_PCI_TARGET_INIT */
+
+int __pci_pre_init(struct pci_controller *hose)
+{
+ /*
+ * This board is always configured as the host & requires the
+ * PCI arbiter to be enabled.
+ */
+ if (!pci_arbiter_enabled()) {
+ printf("PCI: PCI Arbiter disabled!\n");
+ return 0;
+ }
+
+ return 1;
+}
+
+#endif /* defined(CONFIG_440EP) ... */
+
+#if defined(CONFIG_SYS_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller * hose)
+ __attribute__((weak, alias("__pci_target_init")));
+#endif /* CONFIG_SYS_PCI_TARGET_INIT */
+
+int pci_pre_init(struct pci_controller *hose)
+ __attribute__((weak, alias("__pci_pre_init")));
+
+#if defined(CONFIG_SYS_PCI_MASTER_INIT)
+void __pci_master_init(struct pci_controller *hose)
+{
+ u16 reg;
+
+ /*
+ * Write the PowerPC440 EP PCI Configuration regs.
+ * Enable PowerPC440 EP to be a master on the PCI bus (PMM).
+ * Enable PowerPC440 EP to act as a PCI memory target (PTM).
+ */
+ pci_read_config_word(0, PCI_COMMAND, &reg);
+ pci_write_config_word(0, PCI_COMMAND, reg |
+ PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+}
+void pci_master_init(struct pci_controller *hose)
+ __attribute__((weak, alias("__pci_master_init")));
+#endif /* CONFIG_SYS_PCI_MASTER_INIT */
+
+int pci_440_init (struct pci_controller *hose)
+{
+ int reg_num = 0;
+
+#ifndef CONFIG_DISABLE_PISE_TEST
+ /*--------------------------------------------------------------------------+
+ * The PCI initialization sequence enable bit must be set ... if not abort
+ * pci setup since updating the bit requires chip reset.
+ *--------------------------------------------------------------------------*/
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+ unsigned long strap;
+
+ mfsdr(SDR0_SDSTP1,strap);
+ if ((strap & SDR0_SDSTP1_PISE_MASK) == 0) {
+ printf("PCI: SDR0_STRP1[PISE] not set.\n");
+ printf("PCI: Configuration aborted.\n");
+ return -1;
+ }
+#elif defined(CONFIG_440GP)
+ unsigned long strap;
+
+ strap = mfdcr(CPC0_STRP1);
+ if ((strap & CPC0_STRP1_PISE_MASK) == 0) {
+ printf("PCI: CPC0_STRP1[PISE] not set.\n");
+ printf("PCI: Configuration aborted.\n");
+ return -1;
+ }
+#endif
+#endif /* CONFIG_DISABLE_PISE_TEST */
+
+ /*--------------------------------------------------------------------------+
+ * PCI controller init
+ *--------------------------------------------------------------------------*/
+ hose->first_busno = 0;
+ hose->last_busno = 0;
+
+ /* PCI I/O space */
+ pci_set_region(hose->regions + reg_num++,
+ 0x00000000,
+ PCIL0_IOBASE,
+ 0x10000,
+ PCI_REGION_IO);
+
+ /* PCI memory space */
+ pci_set_region(hose->regions + reg_num++,
+ CONFIG_SYS_PCI_TARGBASE,
+ CONFIG_SYS_PCI_MEMBASE,
+#ifdef CONFIG_SYS_PCI_MEMSIZE
+ CONFIG_SYS_PCI_MEMSIZE,
+#else
+ 0x10000000,
+#endif
+ PCI_REGION_MEM );
+
+#if defined(CONFIG_PCI_SYS_MEM_BUS) && defined(CONFIG_PCI_SYS_MEM_PHYS) && \
+ defined(CONFIG_PCI_SYS_MEM_SIZE)
+ /* System memory space */
+ pci_set_region(hose->regions + reg_num++,
+ CONFIG_PCI_SYS_MEM_BUS,
+ CONFIG_PCI_SYS_MEM_PHYS,
+ CONFIG_PCI_SYS_MEM_SIZE,
+ PCI_REGION_MEM | PCI_REGION_SYS_MEMORY );
+#endif
+
+ hose->region_count = reg_num;
+
+ pci_setup_indirect(hose, PCIL0_CFGADR, PCIL0_CFGDATA);
+
+ /* Let board change/modify hose & do initial checks */
+ if (pci_pre_init(hose) == 0) {
+ printf("PCI: Board-specific initialization failed.\n");
+ printf("PCI: Configuration aborted.\n");
+ return -1;
+ }
+
+ pci_register_hose( hose );
+
+ /*--------------------------------------------------------------------------+
+ * PCI target init
+ *--------------------------------------------------------------------------*/
+#if defined(CONFIG_SYS_PCI_TARGET_INIT)
+ pci_target_init(hose); /* Let board setup pci target */
+#else
+ out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
+ out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_ID );
+ out16r( PCIL0_CLS, 0x00060000 ); /* Bridge, host bridge */
+#endif
+
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ out32r( PCIL0_BRDGOPT1, 0x04000060 ); /* PLB Rq pri highest */
+ out32r( PCIL0_BRDGOPT2, in32(PCIL0_BRDGOPT2) | 0x83 ); /* Enable host config, clear Timeout, ensure int src1 */
+#elif defined(PCIL0_BRDGOPT1)
+ out32r( PCIL0_BRDGOPT1, 0x10000060 ); /* PLB Rq pri highest */
+ out32r( PCIL0_BRDGOPT2, in32(PCIL0_BRDGOPT2) | 1 ); /* Enable host config */
+#endif
+
+ /*--------------------------------------------------------------------------+
+ * PCI master init: default is one 256MB region for PCI memory:
+ * 0x3_00000000 - 0x3_0FFFFFFF ==> CONFIG_SYS_PCI_MEMBASE
+ *--------------------------------------------------------------------------*/
+#if defined(CONFIG_SYS_PCI_MASTER_INIT)
+ pci_master_init(hose); /* Let board setup pci master */
+#else
+ out32r( PCIL0_POM0SA, 0 ); /* disable */
+ out32r( PCIL0_POM1SA, 0 ); /* disable */
+ out32r( PCIL0_POM2SA, 0 ); /* disable */
+#if defined(CONFIG_440SPE)
+ out32r( PCIL0_POM0LAL, 0x10000000 );
+ out32r( PCIL0_POM0LAH, 0x0000000c );
+#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ out32r( PCIL0_POM0LAL, 0x20000000 );
+ out32r( PCIL0_POM0LAH, 0x0000000c );
+#else
+ out32r( PCIL0_POM0LAL, 0x00000000 );
+ out32r( PCIL0_POM0LAH, 0x00000003 );
+#endif
+ out32r( PCIL0_POM0PCIAL, CONFIG_SYS_PCI_MEMBASE );
+ out32r( PCIL0_POM0PCIAH, 0x00000000 );
+ out32r( PCIL0_POM0SA, 0xf0000001 ); /* 256MB, enabled */
+ out32r( PCIL0_STS, in32r( PCIL0_STS ) & ~0x0000fff8 );
+#endif
+
+ /*--------------------------------------------------------------------------+
+ * PCI host configuration -- we don't make any assumptions here ... the
+ * _board_must_indicate_ what to do -- there's just too many runtime
+ * scenarios in environments like cPCI, PPMC, etc. to make a determination
+ * based on hard-coded values or state of arbiter enable.
+ *--------------------------------------------------------------------------*/
+ if (is_pci_host(hose)) {
+#ifdef CONFIG_PCI_SCAN_SHOW
+ printf("PCI: Bus Dev VenId DevId Class Int\n");
+#endif
+#if !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && \
+ !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX)
+ out16r( PCIL0_CMD, in16r( PCIL0_CMD ) | PCI_COMMAND_MASTER);
+#endif
+ hose->last_busno = pci_hose_scan(hose);
+ }
+ return hose->last_busno;
+}
+
+void pci_init_board(void)
+{
+ int busno;
+
+ busno = pci_440_init (&ppc440_hose);
+#if (defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)) && \
+ !defined(CONFIG_PCI_DISABLE_PCIE)
+ pcie_setup_hoses(busno + 1);
+#endif
+}
+
+#endif /* CONFIG_440 */
+
+#if defined(CONFIG_405EX)
+void pci_init_board(void)
+{
+#ifdef CONFIG_PCI_SCAN_SHOW
+ printf("PCI: Bus Dev VenId DevId Class Int\n");
+#endif
+ pcie_setup_hoses(0);
+}
+#endif /* CONFIG_405EX */
+
+#endif /* CONFIG_PCI */
diff --git a/arch/ppc/cpu/ppc4xx/4xx_pcie.c b/arch/ppc/cpu/ppc4xx/4xx_pcie.c
new file mode 100644
index 0000000..10b58b7
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/4xx_pcie.c
@@ -0,0 +1,1298 @@
+/*
+ * (C) Copyright 2006 - 2008
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (c) 2005 Cisco Systems. All rights reserved.
+ * Roland Dreier <rolandd@cisco.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+/* define DEBUG for debugging output (obviously ;-)) */
+#if 0
+#define DEBUG
+#endif
+
+#include <common.h>
+#include <pci.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+
+#if (defined(CONFIG_440SPE) || defined(CONFIG_405EX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)) && \
+ defined(CONFIG_PCI) && !defined(CONFIG_PCI_DISABLE_PCIE)
+
+#include <asm/4xx_pcie.h>
+
+enum {
+ PTYPE_ENDPOINT = 0x0,
+ PTYPE_LEGACY_ENDPOINT = 0x1,
+ PTYPE_ROOT_PORT = 0x4,
+
+ LNKW_X1 = 0x1,
+ LNKW_X4 = 0x4,
+ LNKW_X8 = 0x8
+};
+
+static struct pci_controller pcie_hose[CONFIG_SYS_PCIE_NR_PORTS];
+
+/*
+ * Per default, all cards are present, so we need to check if the
+ * link comes up.
+ */
+int __board_pcie_card_present(int port)
+{
+ return 1;
+}
+int board_pcie_card_present(int port)
+ __attribute__((weak, alias("__board_pcie_card_present")));
+
+/*
+ * Some boards have runtime detection of the first and last PCIe
+ * slot used, so let's provide weak default functions for the
+ * common version.
+ */
+int __board_pcie_first(void)
+{
+ return 0;
+}
+int board_pcie_first(void)
+ __attribute__((weak, alias("__board_pcie_first")));
+
+int __board_pcie_last(void)
+{
+ return CONFIG_SYS_PCIE_NR_PORTS - 1;
+}
+int board_pcie_last(void)
+ __attribute__((weak, alias("__board_pcie_last")));
+
+void __board_pcie_setup_port(int port, int rootpoint)
+{
+ /* noting in this weak default implementation */
+}
+void board_pcie_setup_port(int port, int rootpoint)
+ __attribute__((weak, alias("__board_pcie_setup_port")));
+
+void pcie_setup_hoses(int busno)
+{
+ struct pci_controller *hose;
+ int i, bus;
+ int ret = 0;
+ char *env;
+ unsigned int delay;
+ int first = board_pcie_first();
+ int last = board_pcie_last();
+
+ /*
+ * Assume we're called after the PCI(X) hose(s) are initialized,
+ * which takes bus ID 0... and therefore start numbering PCIe's
+ * from the next number.
+ */
+ bus = busno;
+
+ for (i = first; i <= last; i++) {
+ /*
+ * Some boards (e.g. Katmai) can detects via hardware
+ * if a PCIe card is plugged, so let's check this.
+ */
+ if (!board_pcie_card_present(i))
+ continue;
+
+ if (is_end_point(i)) {
+ board_pcie_setup_port(i, 0);
+ ret = ppc4xx_init_pcie_endport(i);
+ } else {
+ board_pcie_setup_port(i, 1);
+ ret = ppc4xx_init_pcie_rootport(i);
+ }
+ if (ret == -ENODEV)
+ continue;
+ if (ret) {
+ printf("PCIE%d: initialization as %s failed\n", i,
+ is_end_point(i) ? "endpoint" : "root-complex");
+ continue;
+ }
+
+ hose = &pcie_hose[i];
+ hose->first_busno = bus;
+ hose->last_busno = bus;
+ hose->current_busno = bus;
+
+ /* setup mem resource */
+ pci_set_region(hose->regions + 0,
+ CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+ CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+ CONFIG_SYS_PCIE_MEMSIZE,
+ PCI_REGION_MEM);
+ hose->region_count = 1;
+ pci_register_hose(hose);
+
+ if (is_end_point(i)) {
+ ppc4xx_setup_pcie_endpoint(hose, i);
+ /*
+ * Reson for no scanning is endpoint can not generate
+ * upstream configuration accesses.
+ */
+ } else {
+ ppc4xx_setup_pcie_rootpoint(hose, i);
+ env = getenv ("pciscandelay");
+ if (env != NULL) {
+ delay = simple_strtoul(env, NULL, 10);
+ if (delay > 5)
+ printf("Warning, expect noticable delay before "
+ "PCIe scan due to 'pciscandelay' value!\n");
+ mdelay(delay * 1000);
+ }
+
+ /*
+ * Config access can only go down stream
+ */
+ hose->last_busno = pci_hose_scan(hose);
+ bus = hose->last_busno + 1;
+ }
+ }
+}
+
+static int validate_endpoint(struct pci_controller *hose)
+{
+ if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE0_CFGBASE)
+ return (is_end_point(0));
+ else if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE1_CFGBASE)
+ return (is_end_point(1));
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
+ else if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE2_CFGBASE)
+ return (is_end_point(2));
+#endif
+
+ return 0;
+}
+
+static u8* pcie_get_base(struct pci_controller *hose, unsigned int devfn)
+{
+ u8 *base = (u8*)hose->cfg_data;
+
+ /* use local configuration space for the first bus */
+ if (PCI_BUS(devfn) == 0) {
+ if (hose->cfg_data == (u8*)CONFIG_SYS_PCIE0_CFGBASE)
+ base = (u8*)CONFIG_SYS_PCIE0_XCFGBASE;
+ if (hose->cfg_data == (u8*)CONFIG_SYS_PCIE1_CFGBASE)
+ base = (u8*)CONFIG_SYS_PCIE1_XCFGBASE;
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
+ if (hose->cfg_data == (u8*)CONFIG_SYS_PCIE2_CFGBASE)
+ base = (u8*)CONFIG_SYS_PCIE2_XCFGBASE;
+#endif
+ }
+
+ return base;
+}
+
+static void pcie_dmer_disable(void)
+{
+ mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE),
+ mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE)) | GPL_DMER_MASK_DISA);
+ mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE),
+ mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE)) | GPL_DMER_MASK_DISA);
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
+ mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE),
+ mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) | GPL_DMER_MASK_DISA);
+#endif
+}
+
+static void pcie_dmer_enable(void)
+{
+ mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE0_BASE),
+ mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE)) & ~GPL_DMER_MASK_DISA);
+ mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE1_BASE),
+ mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE)) & ~GPL_DMER_MASK_DISA);
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
+ mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE2_BASE),
+ mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) & ~GPL_DMER_MASK_DISA);
+#endif
+}
+
+static int pcie_read_config(struct pci_controller *hose, unsigned int devfn,
+ int offset, int len, u32 *val) {
+
+ u8 *address;
+ *val = 0;
+
+ if (validate_endpoint(hose))
+ return 0; /* No upstream config access */
+
+ /*
+ * Bus numbers are relative to hose->first_busno
+ */
+ devfn -= PCI_BDF(hose->first_busno, 0, 0);
+
+ /*
+ * NOTICE: configuration space ranges are currenlty mapped only for
+ * the first 16 buses, so such limit must be imposed. In case more
+ * buses are required the TLB settings in board/amcc/<board>/init.S
+ * need to be altered accordingly (one bus takes 1 MB of memory space).
+ */
+ if (PCI_BUS(devfn) >= 16)
+ return 0;
+
+ /*
+ * Only single device/single function is supported for the primary and
+ * secondary buses of the 440SPe host bridge.
+ */
+ if ((!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 0))) &&
+ ((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1)))
+ return 0;
+
+ address = pcie_get_base(hose, devfn);
+ offset += devfn << 4;
+
+ /*
+ * Reading from configuration space of non-existing device can
+ * generate transaction errors. For the read duration we suppress
+ * assertion of machine check exceptions to avoid those.
+ */
+ pcie_dmer_disable ();
+
+ debug("%s: cfg_data=%08x offset=%08x\n", __func__, hose->cfg_data, offset);
+ switch (len) {
+ case 1:
+ *val = in_8(hose->cfg_data + offset);
+ break;
+ case 2:
+ *val = in_le16((u16 *)(hose->cfg_data + offset));
+ break;
+ default:
+ *val = in_le32((u32*)(hose->cfg_data + offset));
+ break;
+ }
+
+ pcie_dmer_enable ();
+
+ return 0;
+}
+
+static int pcie_write_config(struct pci_controller *hose, unsigned int devfn,
+ int offset, int len, u32 val) {
+
+ u8 *address;
+
+ if (validate_endpoint(hose))
+ return 0; /* No upstream config access */
+
+ /*
+ * Bus numbers are relative to hose->first_busno
+ */
+ devfn -= PCI_BDF(hose->first_busno, 0, 0);
+
+ /*
+ * Same constraints as in pcie_read_config().
+ */
+ if (PCI_BUS(devfn) >= 16)
+ return 0;
+
+ if ((!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 0))) &&
+ ((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1)))
+ return 0;
+
+ address = pcie_get_base(hose, devfn);
+ offset += devfn << 4;
+
+ /*
+ * Suppress MCK exceptions, similar to pcie_read_config()
+ */
+ pcie_dmer_disable ();
+
+ switch (len) {
+ case 1:
+ out_8(hose->cfg_data + offset, val);
+ break;
+ case 2:
+ out_le16((u16 *)(hose->cfg_data + offset), val);
+ break;
+ default:
+ out_le32((u32 *)(hose->cfg_data + offset), val);
+ break;
+ }
+
+ pcie_dmer_enable ();
+
+ return 0;
+}
+
+int pcie_read_config_byte(struct pci_controller *hose,pci_dev_t dev,int offset,u8 *val)
+{
+ u32 v;
+ int rv;
+
+ rv = pcie_read_config(hose, dev, offset, 1, &v);
+ *val = (u8)v;
+ return rv;
+}
+
+int pcie_read_config_word(struct pci_controller *hose,pci_dev_t dev,int offset,u16 *val)
+{
+ u32 v;
+ int rv;
+
+ rv = pcie_read_config(hose, dev, offset, 2, &v);
+ *val = (u16)v;
+ return rv;
+}
+
+int pcie_read_config_dword(struct pci_controller *hose,pci_dev_t dev,int offset,u32 *val)
+{
+ u32 v;
+ int rv;
+
+ rv = pcie_read_config(hose, dev, offset, 3, &v);
+ *val = (u32)v;
+ return rv;
+}
+
+int pcie_write_config_byte(struct pci_controller *hose,pci_dev_t dev,int offset,u8 val)
+{
+ return pcie_write_config(hose,(u32)dev,offset,1,val);
+}
+
+int pcie_write_config_word(struct pci_controller *hose,pci_dev_t dev,int offset,u16 val)
+{
+ return pcie_write_config(hose,(u32)dev,offset,2,(u32 )val);
+}
+
+int pcie_write_config_dword(struct pci_controller *hose,pci_dev_t dev,int offset,u32 val)
+{
+ return pcie_write_config(hose,(u32)dev,offset,3,(u32 )val);
+}
+
+#if defined(CONFIG_440SPE)
+static void ppc4xx_setup_utl(u32 port) {
+
+ volatile void *utl_base = NULL;
+
+ /*
+ * Map UTL registers
+ */
+ switch (port) {
+ case 0:
+ mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x0000000c);
+ mtdcr(DCRN_PEGPL_REGBAL(PCIE0), 0x20000000);
+ mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001);
+ mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0x68782800);
+ break;
+
+ case 1:
+ mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x0000000c);
+ mtdcr(DCRN_PEGPL_REGBAL(PCIE1), 0x20001000);
+ mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001);
+ mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0x68782800);
+ break;
+
+ case 2:
+ mtdcr(DCRN_PEGPL_REGBAH(PCIE2), 0x0000000c);
+ mtdcr(DCRN_PEGPL_REGBAL(PCIE2), 0x20002000);
+ mtdcr(DCRN_PEGPL_REGMSK(PCIE2), 0x00007001);
+ mtdcr(DCRN_PEGPL_SPECIAL(PCIE2), 0x68782800);
+ break;
+ }
+ utl_base = (unsigned int *)(CONFIG_SYS_PCIE_BASE + 0x1000 * port);
+
+ /*
+ * Set buffer allocations and then assert VRB and TXE.
+ */
+ out_be32(utl_base + PEUTL_OUTTR, 0x08000000);
+ out_be32(utl_base + PEUTL_INTR, 0x02000000);
+ out_be32(utl_base + PEUTL_OPDBSZ, 0x10000000);
+ out_be32(utl_base + PEUTL_PBBSZ, 0x53000000);
+ out_be32(utl_base + PEUTL_IPHBSZ, 0x08000000);
+ out_be32(utl_base + PEUTL_IPDBSZ, 0x10000000);
+ out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
+ out_be32(utl_base + PEUTL_PCTL, 0x80800066);
+}
+
+static int check_error(void)
+{
+ u32 valPE0, valPE1, valPE2;
+ int err = 0;
+
+ /* SDR0_PEGPLLLCT1 reset */
+ if (!(valPE0 = SDR_READ(PESDR0_PLLLCT1) & 0x01000000))
+ printf("PCIE: SDR0_PEGPLLLCT1 reset error 0x%x\n", valPE0);
+
+ valPE0 = SDR_READ(PESDR0_RCSSET);
+ valPE1 = SDR_READ(PESDR1_RCSSET);
+ valPE2 = SDR_READ(PESDR2_RCSSET);
+
+ /* SDR0_PExRCSSET rstgu */
+ if (!(valPE0 & 0x01000000) ||
+ !(valPE1 & 0x01000000) ||
+ !(valPE2 & 0x01000000)) {
+ printf("PCIE: SDR0_PExRCSSET rstgu error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET rstdl */
+ if (!(valPE0 & 0x00010000) ||
+ !(valPE1 & 0x00010000) ||
+ !(valPE2 & 0x00010000)) {
+ printf("PCIE: SDR0_PExRCSSET rstdl error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET rstpyn */
+ if ((valPE0 & 0x00001000) ||
+ (valPE1 & 0x00001000) ||
+ (valPE2 & 0x00001000)) {
+ printf("PCIE: SDR0_PExRCSSET rstpyn error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET hldplb */
+ if ((valPE0 & 0x10000000) ||
+ (valPE1 & 0x10000000) ||
+ (valPE2 & 0x10000000)) {
+ printf("PCIE: SDR0_PExRCSSET hldplb error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET rdy */
+ if ((valPE0 & 0x00100000) ||
+ (valPE1 & 0x00100000) ||
+ (valPE2 & 0x00100000)) {
+ printf("PCIE: SDR0_PExRCSSET rdy error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET shutdown */
+ if ((valPE0 & 0x00000100) ||
+ (valPE1 & 0x00000100) ||
+ (valPE2 & 0x00000100)) {
+ printf("PCIE: SDR0_PExRCSSET shutdown error\n");
+ err = -1;
+ }
+ return err;
+}
+
+/*
+ * Initialize PCI Express core
+ */
+int ppc4xx_init_pcie(void)
+{
+ int time_out = 20;
+
+ /* Set PLL clock receiver to LVPECL */
+ SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) | 1 << 28);
+
+ if (check_error()) {
+ printf("ERROR: failed to set PCIe reference clock receiver --"
+ "PESDR0_PLLLCT1 = 0x%08x\n", SDR_READ(PESDR0_PLLLCT1));
+
+ return -1;
+ }
+
+ /* Did resistance calibration work? */
+ if (!(SDR_READ(PESDR0_PLLLCT2) & 0x10000)) {
+ printf("ERROR: PCIe resistance calibration failed --"
+ "PESDR0_PLLLCT2 = 0x%08x\n", SDR_READ(PESDR0_PLLLCT2));
+
+ return -1;
+ }
+ /* De-assert reset of PCIe PLL, wait for lock */
+ SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) & ~(1 << 24));
+ udelay(300); /* 300 uS is maximum time lock should take */
+
+ while (time_out) {
+ if (!(SDR_READ(PESDR0_PLLLCT3) & 0x10000000)) {
+ time_out--;
+ udelay(20); /* Wait 20 uS more if needed */
+ } else
+ break;
+ }
+ if (!time_out) {
+ printf("ERROR: PCIe PLL VCO output not locked to ref clock --"
+ "PESDR0_PLLLCTS=0x%08x\n", SDR_READ(PESDR0_PLLLCT3));
+
+ return -1;
+ }
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+static void ppc4xx_setup_utl(u32 port)
+{
+ volatile void *utl_base = NULL;
+
+ /*
+ * Map UTL registers at 0x0801_n000 (4K 0xfff mask) PEGPLn_REGMSK
+ */
+ switch (port) {
+ case 0:
+ mtdcr(DCRN_PEGPL_REGBAH(PCIE0), U64_TO_U32_HIGH(CONFIG_SYS_PCIE0_UTLBASE));
+ mtdcr(DCRN_PEGPL_REGBAL(PCIE0), U64_TO_U32_LOW(CONFIG_SYS_PCIE0_UTLBASE));
+ mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001); /* BAM 11100000=4KB */
+ mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0);
+ break;
+
+ case 1:
+ mtdcr(DCRN_PEGPL_REGBAH(PCIE1), U64_TO_U32_HIGH(CONFIG_SYS_PCIE0_UTLBASE));
+ mtdcr(DCRN_PEGPL_REGBAL(PCIE1), U64_TO_U32_LOW(CONFIG_SYS_PCIE0_UTLBASE)
+ + 0x1000);
+ mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001); /* BAM 11100000=4KB */
+ mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0);
+ break;
+ }
+ utl_base = (unsigned int *)(CONFIG_SYS_PCIE_BASE + 0x1000 * port);
+
+ /*
+ * Set buffer allocations and then assert VRB and TXE.
+ */
+ out_be32(utl_base + PEUTL_PBCTL, 0x0800000c); /* PLBME, CRRE */
+ out_be32(utl_base + PEUTL_OUTTR, 0x08000000);
+ out_be32(utl_base + PEUTL_INTR, 0x02000000);
+ out_be32(utl_base + PEUTL_OPDBSZ, 0x04000000); /* OPD = 512 Bytes */
+ out_be32(utl_base + PEUTL_PBBSZ, 0x00000000); /* Max 512 Bytes */
+ out_be32(utl_base + PEUTL_IPHBSZ, 0x02000000);
+ out_be32(utl_base + PEUTL_IPDBSZ, 0x04000000); /* IPD = 512 Bytes */
+ out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
+ out_be32(utl_base + PEUTL_PCTL, 0x80800066); /* VRB,TXE,timeout=default */
+}
+
+/*
+ * TODO: double check PCI express SDR based on the latest user manual
+ * Some registers specified here no longer exist.. has to be
+ * updated based on the final EAS spec.
+ */
+static int check_error(void)
+{
+ u32 valPE0, valPE1;
+ int err = 0;
+
+ valPE0 = SDR_READ(SDRN_PESDR_RCSSET(0));
+ valPE1 = SDR_READ(SDRN_PESDR_RCSSET(1));
+
+ /* SDR0_PExRCSSET rstgu */
+ if (!(valPE0 & PESDRx_RCSSET_RSTGU) || !(valPE1 & PESDRx_RCSSET_RSTGU)) {
+ printf("PCIE: SDR0_PExRCSSET rstgu error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET rstdl */
+ if (!(valPE0 & PESDRx_RCSSET_RSTDL) || !(valPE1 & PESDRx_RCSSET_RSTDL)) {
+ printf("PCIE: SDR0_PExRCSSET rstdl error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET rstpyn */
+ if ((valPE0 & PESDRx_RCSSET_RSTPYN) || (valPE1 & PESDRx_RCSSET_RSTPYN)) {
+ printf("PCIE: SDR0_PExRCSSET rstpyn error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET hldplb */
+ if ((valPE0 & PESDRx_RCSSET_HLDPLB) || (valPE1 & PESDRx_RCSSET_HLDPLB)) {
+ printf("PCIE: SDR0_PExRCSSET hldplb error\n");
+ err = -1;
+ }
+
+ /* SDR0_PExRCSSET rdy */
+ if ((valPE0 & PESDRx_RCSSET_RDY) || (valPE1 & PESDRx_RCSSET_RDY)) {
+ printf("PCIE: SDR0_PExRCSSET rdy error\n");
+ err = -1;
+ }
+
+ return err;
+}
+
+/*
+ * Initialize PCI Express core as described in User Manual
+ * TODO: double check PE SDR PLL Register with the updated user manual.
+ */
+int ppc4xx_init_pcie(void)
+{
+ if (check_error())
+ return -1;
+
+ return 0;
+}
+#endif /* CONFIG_460EX */
+
+#if defined(CONFIG_405EX)
+static void ppc4xx_setup_utl(u32 port)
+{
+ u32 utl_base;
+
+ /*
+ * Map UTL registers at 0xef4f_n000 (4K 0xfff mask) PEGPLn_REGMSK
+ */
+ switch (port) {
+ case 0:
+ mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x00000000);
+ mtdcr(DCRN_PEGPL_REGBAL(PCIE0), CONFIG_SYS_PCIE0_UTLBASE);
+ mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001); /* 4k region, valid */
+ mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0);
+ break;
+
+ case 1:
+ mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x00000000);
+ mtdcr(DCRN_PEGPL_REGBAL(PCIE1), CONFIG_SYS_PCIE1_UTLBASE);
+ mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001); /* 4k region, valid */
+ mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0);
+
+ break;
+ }
+ utl_base = (port==0) ? CONFIG_SYS_PCIE0_UTLBASE : CONFIG_SYS_PCIE1_UTLBASE;
+
+ /*
+ * Set buffer allocations and then assert VRB and TXE.
+ */
+ out_be32((u32 *)(utl_base + PEUTL_OUTTR), 0x02000000);
+ out_be32((u32 *)(utl_base + PEUTL_INTR), 0x02000000);
+ out_be32((u32 *)(utl_base + PEUTL_OPDBSZ), 0x04000000);
+ out_be32((u32 *)(utl_base + PEUTL_PBBSZ), 0x21000000);
+ out_be32((u32 *)(utl_base + PEUTL_IPHBSZ), 0x02000000);
+ out_be32((u32 *)(utl_base + PEUTL_IPDBSZ), 0x04000000);
+ out_be32((u32 *)(utl_base + PEUTL_RCIRQEN), 0x00f00000);
+ out_be32((u32 *)(utl_base + PEUTL_PCTL), 0x80800066);
+
+ out_be32((u32 *)(utl_base + PEUTL_PBCTL), 0x0800000c);
+ out_be32((u32 *)(utl_base + PEUTL_RCSTA),
+ in_be32((u32 *)(utl_base + PEUTL_RCSTA)) | 0x000040000);
+}
+
+int ppc4xx_init_pcie(void)
+{
+ /*
+ * Nothing to do on 405EX
+ */
+ return 0;
+}
+#endif /* CONFIG_405EX */
+
+/*
+ * Board-specific pcie initialization
+ * Platform code can reimplement ppc4xx_init_pcie_port_hw() if needed
+ */
+
+/*
+ * Initialize various parts of the PCI Express core for our port:
+ *
+ * - Set as a root port and enable max width
+ * (PXIE0 -> X8, PCIE1 and PCIE2 -> X4).
+ * - Set up UTL configuration.
+ * - Increase SERDES drive strength to levels suggested by AMCC.
+ * - De-assert RSTPYN, RSTDL and RSTGU.
+ *
+ * NOTICE for 440SPE revB chip: PESDRn_UTLSET2 is not set - we leave it
+ * with default setting 0x11310000. The register has new fields,
+ * PESDRn_UTLSET2[LKINE] in particular: clearing it leads to PCIE core
+ * hang.
+ */
+#if defined(CONFIG_440SPE)
+int __ppc4xx_init_pcie_port_hw(int port, int rootport)
+{
+ u32 val = 1 << 24;
+ u32 utlset1;
+
+ if (rootport) {
+ val = PTYPE_ROOT_PORT << 20;
+ utlset1 = 0x21222222;
+ } else {
+ val = PTYPE_LEGACY_ENDPOINT << 20;
+ utlset1 = 0x20222222;
+ }
+
+ if (port == 0)
+ val |= LNKW_X8 << 12;
+ else
+ val |= LNKW_X4 << 12;
+
+ SDR_WRITE(SDRN_PESDR_DLPSET(port), val);
+ SDR_WRITE(SDRN_PESDR_UTLSET1(port), utlset1);
+ if (!ppc440spe_revB())
+ SDR_WRITE(SDRN_PESDR_UTLSET2(port), 0x11000000);
+ SDR_WRITE(SDRN_PESDR_HSSL0SET1(port), 0x35000000);
+ SDR_WRITE(SDRN_PESDR_HSSL1SET1(port), 0x35000000);
+ SDR_WRITE(SDRN_PESDR_HSSL2SET1(port), 0x35000000);
+ SDR_WRITE(SDRN_PESDR_HSSL3SET1(port), 0x35000000);
+ if (port == 0) {
+ SDR_WRITE(PESDR0_HSSL4SET1, 0x35000000);
+ SDR_WRITE(PESDR0_HSSL5SET1, 0x35000000);
+ SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000);
+ SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000);
+ }
+ SDR_WRITE(SDRN_PESDR_RCSSET(port), (SDR_READ(SDRN_PESDR_RCSSET(port)) &
+ ~(1 << 24 | 1 << 16)) | 1 << 12);
+
+ return 0;
+}
+#endif /* CONFIG_440SPE */
+
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+int __ppc4xx_init_pcie_port_hw(int port, int rootport)
+{
+ u32 val;
+ u32 utlset1;
+
+ if (rootport)
+ val = PTYPE_ROOT_PORT << 20;
+ else
+ val = PTYPE_LEGACY_ENDPOINT << 20;
+
+ if (port == 0) {
+ val |= LNKW_X1 << 12;
+ utlset1 = 0x20000000;
+ } else {
+ val |= LNKW_X4 << 12;
+ utlset1 = 0x20101101;
+ }
+
+ SDR_WRITE(SDRN_PESDR_DLPSET(port), val);
+ SDR_WRITE(SDRN_PESDR_UTLSET1(port), utlset1);
+ SDR_WRITE(SDRN_PESDR_UTLSET2(port), 0x01210000);
+
+ switch (port) {
+ case 0:
+ SDR_WRITE(PESDR0_L0CDRCTL, 0x00003230);
+ SDR_WRITE(PESDR0_L0DRV, 0x00000130);
+ SDR_WRITE(PESDR0_L0CLK, 0x00000006);
+
+ SDR_WRITE(PESDR0_PHY_CTL_RST,0x10000000);
+ break;
+
+ case 1:
+ SDR_WRITE(PESDR1_L0CDRCTL, 0x00003230);
+ SDR_WRITE(PESDR1_L1CDRCTL, 0x00003230);
+ SDR_WRITE(PESDR1_L2CDRCTL, 0x00003230);
+ SDR_WRITE(PESDR1_L3CDRCTL, 0x00003230);
+ SDR_WRITE(PESDR1_L0DRV, 0x00000130);
+ SDR_WRITE(PESDR1_L1DRV, 0x00000130);
+ SDR_WRITE(PESDR1_L2DRV, 0x00000130);
+ SDR_WRITE(PESDR1_L3DRV, 0x00000130);
+ SDR_WRITE(PESDR1_L0CLK, 0x00000006);
+ SDR_WRITE(PESDR1_L1CLK, 0x00000006);
+ SDR_WRITE(PESDR1_L2CLK, 0x00000006);
+ SDR_WRITE(PESDR1_L3CLK, 0x00000006);
+
+ SDR_WRITE(PESDR1_PHY_CTL_RST,0x10000000);
+ break;
+ }
+
+ SDR_WRITE(SDRN_PESDR_RCSSET(port), SDR_READ(SDRN_PESDR_RCSSET(port)) |
+ (PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTPYN));
+
+ /* Poll for PHY reset */
+ switch (port) {
+ case 0:
+ while (!(SDR_READ(PESDR0_RSTSTA) & 0x1))
+ udelay(10);
+ break;
+ case 1:
+ while (!(SDR_READ(PESDR1_RSTSTA) & 0x1))
+ udelay(10);
+ break;
+ }
+
+ SDR_WRITE(SDRN_PESDR_RCSSET(port),
+ (SDR_READ(SDRN_PESDR_RCSSET(port)) &
+ ~(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL)) |
+ PESDRx_RCSSET_RSTPYN);
+
+ return 0;
+}
+#endif /* CONFIG_440SPE */
+
+#if defined(CONFIG_405EX)
+int __ppc4xx_init_pcie_port_hw(int port, int rootport)
+{
+ u32 val;
+
+ if (rootport)
+ val = 0x00401000;
+ else
+ val = 0x00101000;
+
+ SDR_WRITE(SDRN_PESDR_DLPSET(port), val);
+ SDR_WRITE(SDRN_PESDR_UTLSET1(port), 0x00000000);
+ SDR_WRITE(SDRN_PESDR_UTLSET2(port), 0x01010000);
+ SDR_WRITE(SDRN_PESDR_PHYSET1(port), 0x720F0000);
+ SDR_WRITE(SDRN_PESDR_PHYSET2(port), 0x70600003);
+
+ /* Assert the PE0_PHY reset */
+ SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x01010000);
+ udelay(1000);
+
+ /* deassert the PE0_hotreset */
+ if (is_end_point(port))
+ SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x01111000);
+ else
+ SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x01101000);
+
+ /* poll for phy !reset */
+ while (!(SDR_READ(SDRN_PESDR_PHYSTA(port)) & 0x00001000))
+ ;
+
+ /* deassert the PE0_gpl_utl_reset */
+ SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x00101000);
+
+ if (port == 0)
+ mtdcr(DCRN_PEGPL_CFG(PCIE0), 0x10000000); /* guarded on */
+ else
+ mtdcr(DCRN_PEGPL_CFG(PCIE1), 0x10000000); /* guarded on */
+
+ return 0;
+}
+#endif /* CONFIG_405EX */
+
+int ppc4xx_init_pcie_port_hw(int port, int rootport)
+__attribute__((weak, alias("__ppc4xx_init_pcie_port_hw")));
+
+/*
+ * We map PCI Express configuration access into the 512MB regions
+ *
+ * NOTICE: revB is very strict about PLB real addressess and ranges to
+ * be mapped for config space; it seems to only work with d_nnnn_nnnn
+ * range (hangs the core upon config transaction attempts when set
+ * otherwise) while revA uses c_nnnn_nnnn.
+ *
+ * For 440SPe revA:
+ * PCIE0: 0xc_4000_0000
+ * PCIE1: 0xc_8000_0000
+ * PCIE2: 0xc_c000_0000
+ *
+ * For 440SPe revB:
+ * PCIE0: 0xd_0000_0000
+ * PCIE1: 0xd_2000_0000
+ * PCIE2: 0xd_4000_0000
+ *
+ * For 405EX:
+ * PCIE0: 0xa000_0000
+ * PCIE1: 0xc000_0000
+ *
+ * For 460EX/GT:
+ * PCIE0: 0xd_0000_0000
+ * PCIE1: 0xd_2000_0000
+ */
+static inline u64 ppc4xx_get_cfgaddr(int port)
+{
+#if defined(CONFIG_405EX)
+ if (port == 0)
+ return (u64)CONFIG_SYS_PCIE0_CFGBASE;
+ else
+ return (u64)CONFIG_SYS_PCIE1_CFGBASE;
+#endif
+#if defined(CONFIG_440SPE)
+ if (ppc440spe_revB()) {
+ switch (port) {
+ default: /* to satisfy compiler */
+ case 0:
+ return 0x0000000d00000000ULL;
+ case 1:
+ return 0x0000000d20000000ULL;
+ case 2:
+ return 0x0000000d40000000ULL;
+ }
+ } else {
+ switch (port) {
+ default: /* to satisfy compiler */
+ case 0:
+ return 0x0000000c40000000ULL;
+ case 1:
+ return 0x0000000c80000000ULL;
+ case 2:
+ return 0x0000000cc0000000ULL;
+ }
+ }
+#endif
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ if (port == 0)
+ return 0x0000000d00000000ULL;
+ else
+ return 0x0000000d20000000ULL;
+#endif
+}
+
+/*
+ * 4xx boards as endpoint and root point setup
+ * and
+ * testing inbound and out bound windows
+ *
+ * 4xx boards can be plugged into another 4xx boards or you can get PCI-E
+ * cable which can be used to setup loop back from one port to another port.
+ * Please rememeber that unless there is a endpoint plugged in to root port it
+ * will not initialize. It is the same in case of endpoint , unless there is
+ * root port attached it will not initialize.
+ *
+ * In this release of software all the PCI-E ports are configured as either
+ * endpoint or rootpoint.In future we will have support for selective ports
+ * setup as endpoint and root point in single board.
+ *
+ * Once your board came up as root point , you can verify by reading
+ * /proc/bus/pci/devices. Where you can see the configuration registers
+ * of endpoint device attached to the port.
+ *
+ * Enpoint cofiguration can be verified by connecting 4xx board to any
+ * host or another 4xx board. Then try to scan the device. In case of
+ * linux use "lspci" or appripriate os command.
+ *
+ * How do I verify the inbound and out bound windows ? (4xx to 4xx)
+ * in this configuration inbound and outbound windows are setup to access
+ * sram memroy area. SRAM is at 0x4 0000 0000 , on PLB bus. This address
+ * is mapped at 0x90000000. From u-boot prompt write data 0xb000 0000,
+ * This is waere your POM(PLB out bound memory window) mapped. then
+ * read the data from other 4xx board's u-boot prompt at address
+ * 0x9000 0000(SRAM). Data should match.
+ * In case of inbound , write data to u-boot command prompt at 0xb000 0000
+ * which is mapped to 0x4 0000 0000. Now on rootpoint yucca u-boot prompt check
+ * data at 0x9000 0000(SRAM).Data should match.
+ */
+int ppc4xx_init_pcie_port(int port, int rootport)
+{
+ static int core_init;
+ volatile u32 val = 0;
+ int attempts;
+ u64 addr;
+ u32 low, high;
+
+ if (!core_init) {
+ if (ppc4xx_init_pcie())
+ return -1;
+ ++core_init;
+ }
+
+ /*
+ * Initialize various parts of the PCI Express core for our port
+ */
+ ppc4xx_init_pcie_port_hw(port, rootport);
+
+ /*
+ * Notice: the following delay has critical impact on device
+ * initialization - if too short (<50ms) the link doesn't get up.
+ */
+ mdelay(100);
+
+ val = SDR_READ(SDRN_PESDR_RCSSTS(port));
+ if (val & (1 << 20)) {
+ printf("PCIE%d: PGRST failed %08x\n", port, val);
+ return -1;
+ }
+
+ /*
+ * Verify link is up
+ */
+ val = SDR_READ(SDRN_PESDR_LOOP(port));
+ if (!(val & 0x00001000)) {
+ printf("PCIE%d: link is not up.\n", port);
+ return -ENODEV;
+ }
+
+ /*
+ * Setup UTL registers - but only on revA!
+ * We use default settings for revB chip.
+ */
+ if (!ppc440spe_revB())
+ ppc4xx_setup_utl(port);
+
+ /*
+ * We map PCI Express configuration access into the 512MB regions
+ */
+ addr = ppc4xx_get_cfgaddr(port);
+ low = U64_TO_U32_LOW(addr);
+ high = U64_TO_U32_HIGH(addr);
+
+ switch (port) {
+ case 0:
+ mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), high);
+ mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), low);
+ mtdcr(DCRN_PEGPL_CFGMSK(PCIE0), 0xe0000001); /* 512MB region, valid */
+ break;
+ case 1:
+ mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), high);
+ mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), low);
+ mtdcr(DCRN_PEGPL_CFGMSK(PCIE1), 0xe0000001); /* 512MB region, valid */
+ break;
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
+ case 2:
+ mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), high);
+ mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), low);
+ mtdcr(DCRN_PEGPL_CFGMSK(PCIE2), 0xe0000001); /* 512MB region, valid */
+ break;
+#endif
+ }
+
+ /*
+ * Check for VC0 active and assert RDY.
+ */
+ attempts = 10;
+ while(!(SDR_READ(SDRN_PESDR_RCSSTS(port)) & (1 << 16))) {
+ if (!(attempts--)) {
+ printf("PCIE%d: VC0 not active\n", port);
+ return -1;
+ }
+ mdelay(1000);
+ }
+ SDR_WRITE(SDRN_PESDR_RCSSET(port),
+ SDR_READ(SDRN_PESDR_RCSSET(port)) | 1 << 20);
+ mdelay(100);
+
+ return 0;
+}
+
+int ppc4xx_init_pcie_rootport(int port)
+{
+ return ppc4xx_init_pcie_port(port, 1);
+}
+
+int ppc4xx_init_pcie_endport(int port)
+{
+ return ppc4xx_init_pcie_port(port, 0);
+}
+
+void ppc4xx_setup_pcie_rootpoint(struct pci_controller *hose, int port)
+{
+ volatile void *mbase = NULL;
+ volatile void *rmbase = NULL;
+
+ pci_set_ops(hose,
+ pcie_read_config_byte,
+ pcie_read_config_word,
+ pcie_read_config_dword,
+ pcie_write_config_byte,
+ pcie_write_config_word,
+ pcie_write_config_dword);
+
+ switch (port) {
+ case 0:
+ mbase = (u32 *)CONFIG_SYS_PCIE0_XCFGBASE;
+ rmbase = (u32 *)CONFIG_SYS_PCIE0_CFGBASE;
+ hose->cfg_data = (u8 *)CONFIG_SYS_PCIE0_CFGBASE;
+ break;
+ case 1:
+ mbase = (u32 *)CONFIG_SYS_PCIE1_XCFGBASE;
+ rmbase = (u32 *)CONFIG_SYS_PCIE1_CFGBASE;
+ hose->cfg_data = (u8 *)CONFIG_SYS_PCIE1_CFGBASE;
+ break;
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
+ case 2:
+ mbase = (u32 *)CONFIG_SYS_PCIE2_XCFGBASE;
+ rmbase = (u32 *)CONFIG_SYS_PCIE2_CFGBASE;
+ hose->cfg_data = (u8 *)CONFIG_SYS_PCIE2_CFGBASE;
+ break;
+#endif
+ }
+
+ /*
+ * Set bus numbers on our root port
+ */
+ out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0);
+ out_8((u8 *)mbase + PCI_SECONDARY_BUS, 1);
+ out_8((u8 *)mbase + PCI_SUBORDINATE_BUS, 1);
+
+ /*
+ * Set up outbound translation to hose->mem_space from PLB
+ * addresses at an offset of 0xd_0000_0000. We set the low
+ * bits of the mask to 11 to turn off splitting into 8
+ * subregions and to enable the outbound translation.
+ */
+ out_le32(mbase + PECFG_POM0LAH, 0x00000000);
+ out_le32(mbase + PECFG_POM0LAL, CONFIG_SYS_PCIE_MEMBASE +
+ port * CONFIG_SYS_PCIE_MEMSIZE);
+ debug("PECFG_POM0LA=%08x.%08x\n", in_le32(mbase + PECFG_POM0LAH),
+ in_le32(mbase + PECFG_POM0LAL));
+
+ switch (port) {
+ case 0:
+ mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), CONFIG_SYS_PCIE_ADDR_HIGH);
+ mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), CONFIG_SYS_PCIE_MEMBASE +
+ port * CONFIG_SYS_PCIE_MEMSIZE);
+ mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
+ mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
+ ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
+ debug("0:PEGPL_OMR1BA=%08x.%08x MSK=%08x.%08x\n",
+ mfdcr(DCRN_PEGPL_OMR1BAH(PCIE0)),
+ mfdcr(DCRN_PEGPL_OMR1BAL(PCIE0)),
+ mfdcr(DCRN_PEGPL_OMR1MSKH(PCIE0)),
+ mfdcr(DCRN_PEGPL_OMR1MSKL(PCIE0)));
+ break;
+ case 1:
+ mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), CONFIG_SYS_PCIE_ADDR_HIGH);
+ mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), CONFIG_SYS_PCIE_MEMBASE +
+ port * CONFIG_SYS_PCIE_MEMSIZE);
+ mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
+ mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
+ ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
+ debug("1:PEGPL_OMR1BA=%08x.%08x MSK=%08x.%08x\n",
+ mfdcr(DCRN_PEGPL_OMR1BAH(PCIE1)),
+ mfdcr(DCRN_PEGPL_OMR1BAL(PCIE1)),
+ mfdcr(DCRN_PEGPL_OMR1MSKH(PCIE1)),
+ mfdcr(DCRN_PEGPL_OMR1MSKL(PCIE1)));
+ break;
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
+ case 2:
+ mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), CONFIG_SYS_PCIE_ADDR_HIGH);
+ mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), CONFIG_SYS_PCIE_MEMBASE +
+ port * CONFIG_SYS_PCIE_MEMSIZE);
+ mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
+ mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
+ ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
+ debug("2:PEGPL_OMR1BA=%08x.%08x MSK=%08x.%08x\n",
+ mfdcr(DCRN_PEGPL_OMR1BAH(PCIE2)),
+ mfdcr(DCRN_PEGPL_OMR1BAL(PCIE2)),
+ mfdcr(DCRN_PEGPL_OMR1MSKH(PCIE2)),
+ mfdcr(DCRN_PEGPL_OMR1MSKL(PCIE2)));
+ break;
+#endif
+ }
+
+ /* Set up 4GB inbound memory window at 0 */
+ out_le32(mbase + PCI_BASE_ADDRESS_0, 0);
+ out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
+ out_le32(mbase + PECFG_BAR0HMPA, 0x7ffffff);
+ out_le32(mbase + PECFG_BAR0LMPA, 0);
+
+ out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
+ out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
+ out_le32(mbase + PECFG_PIM0LAL, 0);
+ out_le32(mbase + PECFG_PIM0LAH, 0);
+ out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
+ out_le32(mbase + PECFG_PIM1LAH, 0x00000004);
+ out_le32(mbase + PECFG_PIMEN, 0x1);
+
+ /* Enable I/O, Mem, and Busmaster cycles */
+ out_le16((u16 *)(mbase + PCI_COMMAND),
+ in_le16((u16 *)(mbase + PCI_COMMAND)) |
+ PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+
+ /* Set Device and Vendor Id */
+ out_le16(mbase + 0x200, 0xaaa0 + port);
+ out_le16(mbase + 0x202, 0xbed0 + port);
+
+ /* Set Class Code to PCI-PCI bridge and Revision Id to 1 */
+ out_le32(mbase + 0x208, 0x06040001);
+
+ printf("PCIE%d: successfully set as root-complex\n", port);
+}
+
+int ppc4xx_setup_pcie_endpoint(struct pci_controller *hose, int port)
+{
+ volatile void *mbase = NULL;
+ int attempts = 0;
+
+ pci_set_ops(hose,
+ pcie_read_config_byte,
+ pcie_read_config_word,
+ pcie_read_config_dword,
+ pcie_write_config_byte,
+ pcie_write_config_word,
+ pcie_write_config_dword);
+
+ switch (port) {
+ case 0:
+ mbase = (u32 *)CONFIG_SYS_PCIE0_XCFGBASE;
+ hose->cfg_data = (u8 *)CONFIG_SYS_PCIE0_CFGBASE;
+ break;
+ case 1:
+ mbase = (u32 *)CONFIG_SYS_PCIE1_XCFGBASE;
+ hose->cfg_data = (u8 *)CONFIG_SYS_PCIE1_CFGBASE;
+ break;
+#if defined(CONFIG_SYS_PCIE2_CFGBASE)
+ case 2:
+ mbase = (u32 *)CONFIG_SYS_PCIE2_XCFGBASE;
+ hose->cfg_data = (u8 *)CONFIG_SYS_PCIE2_CFGBASE;
+ break;
+#endif
+ }
+
+ /*
+ * Set up outbound translation to hose->mem_space from PLB
+ * addresses at an offset of 0xd_0000_0000. We set the low
+ * bits of the mask to 11 to turn off splitting into 8
+ * subregions and to enable the outbound translation.
+ */
+ out_le32(mbase + PECFG_POM0LAH, 0x00001ff8);
+ out_le32(mbase + PECFG_POM0LAL, 0x00001000);
+
+ switch (port) {
+ case 0:
+ mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), CONFIG_SYS_PCIE_ADDR_HIGH);
+ mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), CONFIG_SYS_PCIE_MEMBASE +
+ port * CONFIG_SYS_PCIE_MEMSIZE);
+ mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
+ mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
+ ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
+ break;
+ case 1:
+ mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), CONFIG_SYS_PCIE_ADDR_HIGH);
+ mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), CONFIG_SYS_PCIE_MEMBASE +
+ port * CONFIG_SYS_PCIE_MEMSIZE);
+ mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
+ mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
+ ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
+ break;
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
+ case 2:
+ mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), CONFIG_SYS_PCIE_ADDR_HIGH);
+ mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), CONFIG_SYS_PCIE_MEMBASE +
+ port * CONFIG_SYS_PCIE_MEMSIZE);
+ mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
+ mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
+ ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
+ break;
+#endif
+ }
+
+ /* Set up 64MB inbound memory window at 0 */
+ out_le32(mbase + PCI_BASE_ADDRESS_0, 0);
+ out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
+
+ out_le32(mbase + PECFG_PIM01SAH, 0xffffffff);
+ out_le32(mbase + PECFG_PIM01SAL, 0xfc000000);
+
+ /* Setup BAR0 */
+ out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffff);
+ out_le32(mbase + PECFG_BAR0LMPA, 0xfc000000 | PCI_BASE_ADDRESS_MEM_TYPE_64);
+
+ /* Disable BAR1 & BAR2 */
+ out_le32(mbase + PECFG_BAR1MPA, 0);
+ out_le32(mbase + PECFG_BAR2HMPA, 0);
+ out_le32(mbase + PECFG_BAR2LMPA, 0);
+
+ out_le32(mbase + PECFG_PIM0LAL, U64_TO_U32_LOW(CONFIG_SYS_PCIE_INBOUND_BASE));
+ out_le32(mbase + PECFG_PIM0LAH, U64_TO_U32_HIGH(CONFIG_SYS_PCIE_INBOUND_BASE));
+ out_le32(mbase + PECFG_PIMEN, 0x1);
+
+ /* Enable I/O, Mem, and Busmaster cycles */
+ out_le16((u16 *)(mbase + PCI_COMMAND),
+ in_le16((u16 *)(mbase + PCI_COMMAND)) |
+ PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+ out_le16(mbase + 0x200, 0xcaad); /* Setting vendor ID */
+ out_le16(mbase + 0x202, 0xfeed); /* Setting device ID */
+
+ /* Set Class Code to Processor/PPC */
+ out_le32(mbase + 0x208, 0x0b200001);
+
+ attempts = 10;
+ while(!(SDR_READ(SDRN_PESDR_RCSSTS(port)) & (1 << 8))) {
+ if (!(attempts--)) {
+ printf("PCIE%d: BME not active\n", port);
+ return -1;
+ }
+ mdelay(1000);
+ }
+
+ printf("PCIE%d: successfully set as endpoint\n", port);
+
+ return 0;
+}
+#endif /* CONFIG_440SPE && CONFIG_PCI */
diff --git a/arch/ppc/cpu/ppc4xx/4xx_uart.c b/arch/ppc/cpu/ppc4xx/4xx_uart.c
new file mode 100644
index 0000000..8de6542
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/4xx_uart.c
@@ -0,0 +1,878 @@
+/*
+ * (C) Copyright 2000-2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This source code is dual-licensed. You may use it under the terms of the
+ * GNU General Public License version 2, or under the license below.
+ *
+ * This source code has been made available to you by IBM on an AS-IS
+ * basis. Anyone receiving this source is licensed under IBM
+ * copyrights to use it in any way he or she deems fit, including
+ * copying it, modifying it, compiling it, and redistributing it either
+ * with or without modifications. No license under IBM patents or
+ * patent applications is to be implied by the copyright license.
+ *
+ * Any user of this software should understand that IBM cannot provide
+ * technical support for this software and will not be responsible for
+ * any consequences resulting from the use of this software.
+ *
+ * Any person who transfers this source code or any derivative work
+ * must include the IBM copyright notice, this paragraph, and the
+ * preceding two paragraphs in the transferred software.
+ *
+ * COPYRIGHT I B M CORPORATION 1995
+ * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
+ */
+
+#include <common.h>
+#include <commproc.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <watchdog.h>
+#include <ppc4xx.h>
+
+#ifdef CONFIG_SERIAL_MULTI
+#include <serial.h>
+#endif
+
+#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
+#include <malloc.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
+ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
+ defined(CONFIG_405EX) || defined(CONFIG_440)
+
+#if defined(CONFIG_440)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define UART0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000300)
+#define UART1_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000400)
+#else
+#define UART0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000200)
+#define UART1_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000300)
+#endif
+
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#define UART2_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000600)
+#endif
+
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define UART2_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000500)
+#define UART3_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000600)
+#endif
+
+#if defined(CONFIG_440GP)
+#define CR0_MASK 0x3fff0000
+#define CR0_EXTCLK_ENA 0x00600000
+#define CR0_UDIV_POS 16
+#define UDIV_SUBTRACT 1
+#define UART0_SDR CPC0_CR0
+#define MFREG(a, d) d = mfdcr(a)
+#define MTREG(a, d) mtdcr(a, d)
+#else /* #if defined(CONFIG_440GP) */
+/* all other 440 PPC's access clock divider via sdr register */
+#define CR0_MASK 0xdfffffff
+#define CR0_EXTCLK_ENA 0x00800000
+#define CR0_UDIV_POS 0
+#define UDIV_SUBTRACT 0
+#define UART0_SDR SDR0_UART0
+#define UART1_SDR SDR0_UART1
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define UART2_SDR SDR0_UART2
+#endif
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define UART3_SDR SDR0_UART3
+#endif
+#define MFREG(a, d) mfsdr(a, d)
+#define MTREG(a, d) mtsdr(a, d)
+#endif /* #if defined(CONFIG_440GP) */
+#elif defined(CONFIG_405EP) || defined(CONFIG_405EZ)
+#define UART0_BASE 0xef600300
+#define UART1_BASE 0xef600400
+#define UCR0_MASK 0x0000007f
+#define UCR1_MASK 0x00007f00
+#define UCR0_UDIV_POS 0
+#define UCR1_UDIV_POS 8
+#define UDIV_MAX 127
+#elif defined(CONFIG_405EX)
+#define UART0_BASE 0xef600200
+#define UART1_BASE 0xef600300
+#define CR0_MASK 0x000000ff
+#define CR0_EXTCLK_ENA 0x00800000
+#define CR0_UDIV_POS 0
+#define UDIV_SUBTRACT 0
+#define UART0_SDR SDR0_UART0
+#define UART1_SDR SDR0_UART1
+#else /* CONFIG_405GP || CONFIG_405CR */
+#define UART0_BASE 0xef600300
+#define UART1_BASE 0xef600400
+#define CR0_MASK 0x00001fff
+#define CR0_EXTCLK_ENA 0x000000c0
+#define CR0_UDIV_POS 1
+#define UDIV_MAX 32
+#endif
+
+/* using serial port 0 or 1 as U-Boot console ? */
+#if defined(CONFIG_UART1_CONSOLE)
+#define ACTING_UART0_BASE UART1_BASE
+#define ACTING_UART1_BASE UART0_BASE
+#else
+#define ACTING_UART0_BASE UART0_BASE
+#define ACTING_UART1_BASE UART1_BASE
+#endif
+
+#if defined(CONFIG_405EP) && defined(CONFIG_SYS_EXT_SERIAL_CLOCK)
+#error "External serial clock not supported on AMCC PPC405EP!"
+#endif
+
+#define UART_RBR 0x00
+#define UART_THR 0x00
+#define UART_IER 0x01
+#define UART_IIR 0x02
+#define UART_FCR 0x02
+#define UART_LCR 0x03
+#define UART_MCR 0x04
+#define UART_LSR 0x05
+#define UART_MSR 0x06
+#define UART_SCR 0x07
+#define UART_DLL 0x00
+#define UART_DLM 0x01
+
+/*-----------------------------------------------------------------------------+
+ | Line Status Register.
+ +-----------------------------------------------------------------------------*/
+#define asyncLSRDataReady1 0x01
+#define asyncLSROverrunError1 0x02
+#define asyncLSRParityError1 0x04
+#define asyncLSRFramingError1 0x08
+#define asyncLSRBreakInterrupt1 0x10
+#define asyncLSRTxHoldEmpty1 0x20
+#define asyncLSRTxShiftEmpty1 0x40
+#define asyncLSRRxFifoError1 0x80
+
+#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
+/*-----------------------------------------------------------------------------+
+ | Fifo
+ +-----------------------------------------------------------------------------*/
+typedef struct {
+ char *rx_buffer;
+ ulong rx_put;
+ ulong rx_get;
+} serial_buffer_t;
+
+volatile static serial_buffer_t buf_info;
+#endif
+
+static void serial_init_common(u32 base, u32 udiv, u16 bdiv)
+{
+ PPC4xx_SYS_INFO sys_info;
+ u8 val;
+
+ get_sys_info(&sys_info);
+
+ /* Correct UART frequency in bd-info struct now that
+ * the UART divisor is available
+ */
+#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
+ gd->uart_clk = CONFIG_SYS_EXT_SERIAL_CLOCK;
+#else
+ gd->uart_clk = sys_info.freqUART / udiv;
+#endif
+
+ out_8((u8 *)base + UART_LCR, 0x80); /* set DLAB bit */
+ out_8((u8 *)base + UART_DLL, bdiv); /* set baudrate divisor */
+ out_8((u8 *)base + UART_DLM, bdiv >> 8); /* set baudrate divisor */
+ out_8((u8 *)base + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
+ out_8((u8 *)base + UART_FCR, 0x00); /* disable FIFO */
+ out_8((u8 *)base + UART_MCR, 0x00); /* no modem control DTR RTS */
+ val = in_8((u8 *)base + UART_LSR); /* clear line status */
+ val = in_8((u8 *)base + UART_RBR); /* read receive buffer */
+ out_8((u8 *)base + UART_SCR, 0x00); /* set scratchpad */
+ out_8((u8 *)base + UART_IER, 0x00); /* set interrupt enable reg */
+}
+
+#if (defined(CONFIG_440) || defined(CONFIG_405EX)) && \
+ !defined(CONFIG_SYS_EXT_SERIAL_CLOCK)
+static void serial_divs (int baudrate, unsigned long *pudiv,
+ unsigned short *pbdiv)
+{
+ sys_info_t sysinfo;
+ unsigned long div; /* total divisor udiv * bdiv */
+ unsigned long umin; /* minimum udiv */
+ unsigned short diff; /* smallest diff */
+ unsigned long udiv; /* best udiv */
+ unsigned short idiff; /* current diff */
+ unsigned short ibdiv; /* current bdiv */
+ unsigned long i;
+ unsigned long est; /* current estimate */
+
+ get_sys_info(&sysinfo);
+
+ udiv = 32; /* Assume lowest possible serial clk */
+ div = sysinfo.freqPLB / (16 * baudrate); /* total divisor */
+ umin = sysinfo.pllOpbDiv << 1; /* 2 x OPB divisor */
+ diff = 32; /* highest possible */
+
+ /* i is the test udiv value -- start with the largest
+ * possible (32) to minimize serial clock and constrain
+ * search to umin.
+ */
+ for (i = 32; i > umin; i--) {
+ ibdiv = div / i;
+ est = i * ibdiv;
+ idiff = (est > div) ? (est-div) : (div-est);
+ if (idiff == 0) {
+ udiv = i;
+ break; /* can't do better */
+ } else if (idiff < diff) {
+ udiv = i; /* best so far */
+ diff = idiff; /* update lowest diff*/
+ }
+ }
+
+ *pudiv = udiv;
+ *pbdiv = div / udiv;
+}
+
+#elif defined(CONFIG_405EZ)
+
+static void serial_divs (int baudrate, unsigned long *pudiv,
+ unsigned short *pbdiv)
+{
+ sys_info_t sysinfo;
+ unsigned long div; /* total divisor udiv * bdiv */
+ unsigned long umin; /* minimum udiv */
+ unsigned short diff; /* smallest diff */
+ unsigned long udiv; /* best udiv */
+ unsigned short idiff; /* current diff */
+ unsigned short ibdiv; /* current bdiv */
+ unsigned long i;
+ unsigned long est; /* current estimate */
+ unsigned long plloutb;
+ unsigned long cpr_pllc;
+ u32 reg;
+
+ /* check the pll feedback source */
+ mfcpr(CPR0_PLLC, cpr_pllc);
+
+ get_sys_info(&sysinfo);
+
+ plloutb = ((CONFIG_SYS_CLK_FREQ * ((cpr_pllc & PLLC_SRC_MASK) ?
+ sysinfo.pllFwdDivB : sysinfo.pllFwdDiv) *
+ sysinfo.pllFbkDiv) / sysinfo.pllFwdDivB);
+ udiv = 256; /* Assume lowest possible serial clk */
+ div = plloutb / (16 * baudrate); /* total divisor */
+ umin = (plloutb / get_OPB_freq()) << 1; /* 2 x OPB divisor */
+ diff = 256; /* highest possible */
+
+ /* i is the test udiv value -- start with the largest
+ * possible (256) to minimize serial clock and constrain
+ * search to umin.
+ */
+ for (i = 256; i > umin; i--) {
+ ibdiv = div / i;
+ est = i * ibdiv;
+ idiff = (est > div) ? (est-div) : (div-est);
+ if (idiff == 0) {
+ udiv = i;
+ break; /* can't do better */
+ } else if (idiff < diff) {
+ udiv = i; /* best so far */
+ diff = idiff; /* update lowest diff*/
+ }
+ }
+
+ *pudiv = udiv;
+ mfcpr(CPC0_PERD0, reg);
+ reg &= ~0x0000ffff;
+ reg |= ((udiv - 0) << 8) | (udiv - 0);
+ mtcpr(CPC0_PERD0, reg);
+ *pbdiv = div / udiv;
+}
+#endif /* defined(CONFIG_440) && !defined(CONFIG_SYS_EXT_SERIAL_CLK) */
+
+/*
+ * Minimal serial functions needed to use one of the SMC ports
+ * as serial console interface.
+ */
+
+#if defined(CONFIG_440)
+int serial_init_dev(unsigned long base)
+{
+ unsigned long reg;
+ unsigned long udiv;
+ unsigned short bdiv;
+#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
+ unsigned long tmp;
+#endif
+
+ MFREG(UART0_SDR, reg);
+ reg &= ~CR0_MASK;
+
+#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
+ reg |= CR0_EXTCLK_ENA;
+ udiv = 1;
+ tmp = gd->baudrate * 16;
+ bdiv = (CONFIG_SYS_EXT_SERIAL_CLOCK + tmp / 2) / tmp;
+#else
+ /* For 440, the cpu clock is on divider chain A, UART on divider
+ * chain B ... so cpu clock is irrelevant. Get the "optimized"
+ * values that are subject to the 1/2 opb clock constraint
+ */
+ serial_divs (gd->baudrate, &udiv, &bdiv);
+#endif
+
+ reg |= (udiv - UDIV_SUBTRACT) << CR0_UDIV_POS; /* set the UART divisor */
+
+ /*
+ * Configure input clock to baudrate generator for all
+ * available serial ports here
+ */
+ MTREG(UART0_SDR, reg);
+#if defined(UART1_SDR)
+ MTREG(UART1_SDR, reg);
+#endif
+#if defined(UART2_SDR)
+ MTREG(UART2_SDR, reg);
+#endif
+#if defined(UART3_SDR)
+ MTREG(UART3_SDR, reg);
+#endif
+
+ serial_init_common(base, udiv, bdiv);
+
+ return (0);
+}
+
+#else /* !defined(CONFIG_440) */
+
+int serial_init_dev (unsigned long base)
+{
+ unsigned long reg;
+ unsigned long tmp;
+ unsigned long clk;
+ unsigned long udiv;
+ unsigned short bdiv;
+
+#ifdef CONFIG_405EX
+ clk = tmp = 0;
+ mfsdr(UART0_SDR, reg);
+ reg &= ~CR0_MASK;
+#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
+ reg |= CR0_EXTCLK_ENA;
+ udiv = 1;
+ tmp = gd->baudrate * 16;
+ bdiv = (CONFIG_SYS_EXT_SERIAL_CLOCK + tmp / 2) / tmp;
+#else
+ serial_divs(gd->baudrate, &udiv, &bdiv);
+#endif
+ reg |= (udiv - UDIV_SUBTRACT) << CR0_UDIV_POS; /* set the UART divisor */
+
+ /*
+ * Configure input clock to baudrate generator for all
+ * available serial ports here
+ */
+ mtsdr(UART0_SDR, reg);
+
+#if defined(UART1_SDR)
+ mtsdr(UART1_SDR, reg);
+#endif
+
+#elif defined(CONFIG_405EZ)
+ serial_divs(gd->baudrate, &udiv, &bdiv);
+ clk = tmp = reg = 0;
+#else
+#ifdef CONFIG_405EP
+ reg = mfdcr(CPC0_UCR) & ~(UCR0_MASK | UCR1_MASK);
+ clk = gd->cpu_clk;
+ tmp = CONFIG_SYS_BASE_BAUD * 16;
+ udiv = (clk + tmp / 2) / tmp;
+ if (udiv > UDIV_MAX) /* max. n bits for udiv */
+ udiv = UDIV_MAX;
+ reg |= (udiv) << UCR0_UDIV_POS; /* set the UART divisor */
+ reg |= (udiv) << UCR1_UDIV_POS; /* set the UART divisor */
+ mtdcr (CPC0_UCR, reg);
+#else /* CONFIG_405EP */
+ reg = mfdcr(CPC0_CR0) & ~CR0_MASK;
+#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
+ clk = CONFIG_SYS_EXT_SERIAL_CLOCK;
+ udiv = 1;
+ reg |= CR0_EXTCLK_ENA;
+#else
+ clk = gd->cpu_clk;
+#ifdef CONFIG_SYS_405_UART_ERRATA_59
+ udiv = 31; /* Errata 59: stuck at 31 */
+#else
+ tmp = CONFIG_SYS_BASE_BAUD * 16;
+ udiv = (clk + tmp / 2) / tmp;
+ if (udiv > UDIV_MAX) /* max. n bits for udiv */
+ udiv = UDIV_MAX;
+#endif
+#endif
+ reg |= (udiv - 1) << CR0_UDIV_POS; /* set the UART divisor */
+ mtdcr (CPC0_CR0, reg);
+#endif /* CONFIG_405EP */
+ tmp = gd->baudrate * udiv * 16;
+ bdiv = (clk + tmp / 2) / tmp;
+#endif /* CONFIG_405EX */
+
+ serial_init_common(base, udiv, bdiv);
+
+ return (0);
+}
+
+#endif /* if defined(CONFIG_440) */
+
+void serial_setbrg_dev(unsigned long base)
+{
+ serial_init_dev(base);
+}
+
+void serial_putc_dev(unsigned long base, const char c)
+{
+ int i;
+
+ if (c == '\n')
+ serial_putc_dev(base, '\r');
+
+ /* check THRE bit, wait for transmiter available */
+ for (i = 1; i < 3500; i++) {
+ if ((in_8((u8 *)base + UART_LSR) & 0x20) == 0x20)
+ break;
+ udelay (100);
+ }
+
+ out_8((u8 *)base + UART_THR, c); /* put character out */
+}
+
+void serial_puts_dev (unsigned long base, const char *s)
+{
+ while (*s)
+ serial_putc_dev (base, *s++);
+}
+
+int serial_getc_dev (unsigned long base)
+{
+ unsigned char status = 0;
+
+ while (1) {
+#if defined(CONFIG_HW_WATCHDOG)
+ WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
+#endif /* CONFIG_HW_WATCHDOG */
+
+ status = in_8((u8 *)base + UART_LSR);
+ if ((status & asyncLSRDataReady1) != 0x0)
+ break;
+
+ if ((status & ( asyncLSRFramingError1 |
+ asyncLSROverrunError1 |
+ asyncLSRParityError1 |
+ asyncLSRBreakInterrupt1 )) != 0) {
+ out_8((u8 *)base + UART_LSR,
+ asyncLSRFramingError1 |
+ asyncLSROverrunError1 |
+ asyncLSRParityError1 |
+ asyncLSRBreakInterrupt1);
+ }
+ }
+
+ return (0x000000ff & (int) in_8((u8 *)base));
+}
+
+int serial_tstc_dev (unsigned long base)
+{
+ unsigned char status;
+
+ status = in_8((u8 *)base + UART_LSR);
+ if ((status & asyncLSRDataReady1) != 0x0)
+ return (1);
+
+ if ((status & ( asyncLSRFramingError1 |
+ asyncLSROverrunError1 |
+ asyncLSRParityError1 |
+ asyncLSRBreakInterrupt1 )) != 0) {
+ out_8((u8 *)base + UART_LSR,
+ asyncLSRFramingError1 |
+ asyncLSROverrunError1 |
+ asyncLSRParityError1 |
+ asyncLSRBreakInterrupt1);
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
+
+void serial_isr (void *arg)
+{
+ int space;
+ int c;
+ const int rx_get = buf_info.rx_get;
+ int rx_put = buf_info.rx_put;
+
+ if (rx_get <= rx_put)
+ space = CONFIG_SERIAL_SOFTWARE_FIFO - (rx_put - rx_get);
+ else
+ space = rx_get - rx_put;
+
+ while (serial_tstc_dev (ACTING_UART0_BASE)) {
+ c = serial_getc_dev (ACTING_UART0_BASE);
+ if (space) {
+ buf_info.rx_buffer[rx_put++] = c;
+ space--;
+ }
+ if (rx_put == CONFIG_SERIAL_SOFTWARE_FIFO)
+ rx_put = 0;
+ if (space < CONFIG_SERIAL_SOFTWARE_FIFO / 4) {
+ /* Stop flow by setting RTS inactive */
+ out_8((u8 *)ACTING_UART0_BASE + UART_MCR,
+ in_8((u8 *)ACTING_UART0_BASE + UART_MCR) &
+ (0xFF ^ 0x02));
+ }
+ }
+ buf_info.rx_put = rx_put;
+}
+
+void serial_buffered_init (void)
+{
+ serial_puts ("Switching to interrupt driven serial input mode.\n");
+ buf_info.rx_buffer = malloc (CONFIG_SERIAL_SOFTWARE_FIFO);
+ buf_info.rx_put = 0;
+ buf_info.rx_get = 0;
+
+ if (in_8((u8 *)ACTING_UART0_BASE + UART_MSR) & 0x10)
+ serial_puts ("Check CTS signal present on serial port: OK.\n");
+ else
+ serial_puts ("WARNING: CTS signal not present on serial port.\n");
+
+ irq_install_handler ( VECNUM_U0 /*UART0 */ /*int vec */ ,
+ serial_isr /*interrupt_handler_t *handler */ ,
+ (void *) &buf_info /*void *arg */ );
+
+ /* Enable "RX Data Available" Interrupt on UART */
+ out_8(ACTING_UART0_BASE + UART_IER, 0x01);
+ /* Set DTR active */
+ out_8(ACTING_UART0_BASE + UART_MCR,
+ in_8((u8 *)ACTING_UART0_BASE + UART_MCR) | 0x01);
+ /* Start flow by setting RTS active */
+ out_8(ACTING_UART0_BASE + UART_MCR,
+ in_8((u8 *)ACTING_UART0_BASE + UART_MCR) | 0x02);
+ /* Setup UART FIFO: RX trigger level: 4 byte, Enable FIFO */
+ out_8(ACTING_UART0_BASE + UART_FCR, (1 << 6) | 1);
+}
+
+void serial_buffered_putc (const char c)
+{
+ /* Wait for CTS */
+#if defined(CONFIG_HW_WATCHDOG)
+ while (!(in_8((u8 *)ACTING_UART0_BASE + UART_MSR) & 0x10))
+ WATCHDOG_RESET ();
+#else
+ while (!(in_8((u8 *)ACTING_UART0_BASE + UART_MSR) & 0x10));
+#endif
+ serial_putc (c);
+}
+
+void serial_buffered_puts (const char *s)
+{
+ serial_puts (s);
+}
+
+int serial_buffered_getc (void)
+{
+ int space;
+ int c;
+ int rx_get = buf_info.rx_get;
+ int rx_put;
+
+#if defined(CONFIG_HW_WATCHDOG)
+ while (rx_get == buf_info.rx_put)
+ WATCHDOG_RESET ();
+#else
+ while (rx_get == buf_info.rx_put);
+#endif
+ c = buf_info.rx_buffer[rx_get++];
+ if (rx_get == CONFIG_SERIAL_SOFTWARE_FIFO)
+ rx_get = 0;
+ buf_info.rx_get = rx_get;
+
+ rx_put = buf_info.rx_put;
+ if (rx_get <= rx_put)
+ space = CONFIG_SERIAL_SOFTWARE_FIFO - (rx_put - rx_get);
+ else
+ space = rx_get - rx_put;
+
+ if (space > CONFIG_SERIAL_SOFTWARE_FIFO / 2) {
+ /* Start flow by setting RTS active */
+ out_8(ACTING_UART0_BASE + UART_MCR,
+ in_8((u8 *)ACTING_UART0_BASE + UART_MCR) | 0x02);
+ }
+
+ return c;
+}
+
+int serial_buffered_tstc (void)
+{
+ return (buf_info.rx_get != buf_info.rx_put) ? 1 : 0;
+}
+
+#endif /* CONFIG_SERIAL_SOFTWARE_FIFO */
+
+#if defined(CONFIG_CMD_KGDB)
+/*
+ AS HARNOIS : according to CONFIG_KGDB_SER_INDEX kgdb uses serial port
+ number 0 or number 1
+ - if CONFIG_KGDB_SER_INDEX = 1 => serial port number 0 :
+ configuration has been already done
+ - if CONFIG_KGDB_SER_INDEX = 2 => serial port number 1 :
+ configure port 1 for serial I/O with rate = CONFIG_KGDB_BAUDRATE
+*/
+#if (CONFIG_KGDB_SER_INDEX & 2)
+void kgdb_serial_init (void)
+{
+ u8 val;
+ u16 br_reg;
+
+ get_clocks ();
+ br_reg = (((((gd->cpu_clk / 16) / 18) * 10) / CONFIG_KGDB_BAUDRATE) +
+ 5) / 10;
+ /*
+ * Init onboard 16550 UART
+ */
+ out_8((u8 *)ACTING_UART1_BASE + UART_LCR, 0x80); /* set DLAB bit */
+ out_8((u8 *)ACTING_UART1_BASE + UART_DLL, (br_reg & 0x00ff)); /* set divisor for 9600 baud */
+ out_8((u8 *)ACTING_UART1_BASE + UART_DLM, ((br_reg & 0xff00) >> 8)); /* set divisor for 9600 baud */
+ out_8((u8 *)ACTING_UART1_BASE + UART_LCR, 0x03); /* line control 8 bits no parity */
+ out_8((u8 *)ACTING_UART1_BASE + UART_FCR, 0x00); /* disable FIFO */
+ out_8((u8 *)ACTING_UART1_BASE + UART_MCR, 0x00); /* no modem control DTR RTS */
+ val = in_8((u8 *)ACTING_UART1_BASE + UART_LSR); /* clear line status */
+ val = in_8((u8 *)ACTING_UART1_BASE + UART_RBR); /* read receive buffer */
+ out_8((u8 *)ACTING_UART1_BASE + UART_SCR, 0x00); /* set scratchpad */
+ out_8((u8 *)ACTING_UART1_BASE + UART_IER, 0x00); /* set interrupt enable reg */
+}
+
+void putDebugChar (const char c)
+{
+ if (c == '\n')
+ serial_putc ('\r');
+
+ out_8((u8 *)ACTING_UART1_BASE + UART_THR, c); /* put character out */
+
+ /* check THRE bit, wait for transfer done */
+ while ((in_8((u8 *)ACTING_UART1_BASE + UART_LSR) & 0x20) != 0x20);
+}
+
+void putDebugStr (const char *s)
+{
+ while (*s)
+ serial_putc (*s++);
+}
+
+int getDebugChar (void)
+{
+ unsigned char status = 0;
+
+ while (1) {
+ status = in_8((u8 *)ACTING_UART1_BASE + UART_LSR);
+ if ((status & asyncLSRDataReady1) != 0x0)
+ break;
+
+ if ((status & (asyncLSRFramingError1 |
+ asyncLSROverrunError1 |
+ asyncLSRParityError1 |
+ asyncLSRBreakInterrupt1 )) != 0) {
+ out_8((u8 *)ACTING_UART1_BASE + UART_LSR,
+ asyncLSRFramingError1 |
+ asyncLSROverrunError1 |
+ asyncLSRParityError1 |
+ asyncLSRBreakInterrupt1);
+ }
+ }
+
+ return (0x000000ff & (int) in_8((u8 *)ACTING_UART1_BASE));
+}
+
+void kgdb_interruptible (int yes)
+{
+ return;
+}
+
+#else /* ! (CONFIG_KGDB_SER_INDEX & 2) */
+
+void kgdb_serial_init (void)
+{
+ serial_printf ("[on serial] ");
+}
+
+void putDebugChar (int c)
+{
+ serial_putc (c);
+}
+
+void putDebugStr (const char *str)
+{
+ serial_puts (str);
+}
+
+int getDebugChar (void)
+{
+ return serial_getc ();
+}
+
+void kgdb_interruptible (int yes)
+{
+ return;
+}
+#endif /* (CONFIG_KGDB_SER_INDEX & 2) */
+#endif
+
+
+#if defined(CONFIG_SERIAL_MULTI)
+int serial0_init(void)
+{
+ return (serial_init_dev(UART0_BASE));
+}
+
+int serial1_init(void)
+{
+ return (serial_init_dev(UART1_BASE));
+}
+
+void serial0_setbrg (void)
+{
+ serial_setbrg_dev(UART0_BASE);
+}
+
+void serial1_setbrg (void)
+{
+ serial_setbrg_dev(UART1_BASE);
+}
+
+void serial0_putc(const char c)
+{
+ serial_putc_dev(UART0_BASE,c);
+}
+
+void serial1_putc(const char c)
+{
+ serial_putc_dev(UART1_BASE, c);
+}
+
+void serial0_puts(const char *s)
+{
+ serial_puts_dev(UART0_BASE, s);
+}
+
+void serial1_puts(const char *s)
+{
+ serial_puts_dev(UART1_BASE, s);
+}
+
+int serial0_getc(void)
+{
+ return(serial_getc_dev(UART0_BASE));
+}
+
+int serial1_getc(void)
+{
+ return(serial_getc_dev(UART1_BASE));
+}
+
+int serial0_tstc(void)
+{
+ return (serial_tstc_dev(UART0_BASE));
+}
+
+int serial1_tstc(void)
+{
+ return (serial_tstc_dev(UART1_BASE));
+}
+
+struct serial_device serial0_device =
+{
+ "serial0",
+ "UART0",
+ serial0_init,
+ serial0_setbrg,
+ serial0_getc,
+ serial0_tstc,
+ serial0_putc,
+ serial0_puts,
+};
+
+struct serial_device serial1_device =
+{
+ "serial1",
+ "UART1",
+ serial1_init,
+ serial1_setbrg,
+ serial1_getc,
+ serial1_tstc,
+ serial1_putc,
+ serial1_puts,
+};
+#else
+/*
+ * Wrapper functions
+ */
+int serial_init(void)
+{
+ return serial_init_dev(ACTING_UART0_BASE);
+}
+
+void serial_setbrg(void)
+{
+ serial_setbrg_dev(ACTING_UART0_BASE);
+}
+
+void serial_putc(const char c)
+{
+ serial_putc_dev(ACTING_UART0_BASE, c);
+}
+
+void serial_puts(const char *s)
+{
+ serial_puts_dev(ACTING_UART0_BASE, s);
+}
+
+int serial_getc(void)
+{
+ return serial_getc_dev(ACTING_UART0_BASE);
+}
+
+int serial_tstc(void)
+{
+ return serial_tstc_dev(ACTING_UART0_BASE);
+}
+#endif /* CONFIG_SERIAL_MULTI */
+
+#endif /* CONFIG_405GP || CONFIG_405CR */
diff --git a/arch/ppc/cpu/ppc4xx/Makefile b/arch/ppc/cpu/ppc4xx/Makefile
new file mode 100644
index 0000000..88d53fb
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/Makefile
@@ -0,0 +1,92 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(CPU).a
+
+START := resetvec.o
+START += start.o
+
+SOBJS := cache.o
+SOBJS += dcr.o
+SOBJS += kgdb.o
+
+COBJS := 40x_spd_sdram.o
+
+COBJS += 44x_spd_ddr.o
+COBJS += 44x_spd_ddr2.o
+ifdef CONFIG_PPC4xx_DDR_AUTOCALIBRATION
+COBJS += 4xx_ibm_ddr2_autocalib.o
+endif
+COBJS += 4xx_pci.o
+COBJS += 4xx_pcie.o
+COBJS += bedbug_405.o
+ifdef CONFIG_CMD_CHIP_CONFIG
+COBJS += cmd_chip_config.o
+endif
+COBJS += commproc.o
+COBJS += cpu.o
+COBJS += cpu_init.o
+COBJS += denali_data_eye.o
+COBJS += denali_spd_ddr2.o
+COBJS += ecc.o
+COBJS += fdt.o
+COBJS += interrupts.o
+COBJS += iop480_uart.o
+ifdef CONFIG_CMD_REGINFO
+COBJS += reginfo.o
+endif
+COBJS += sdram.o
+COBJS += speed.o
+COBJS += tlb.o
+COBJS += traps.o
+COBJS += usb.o
+COBJS += usb_ohci.o
+COBJS += usbdev.o
+ifndef CONFIG_XILINX_440
+COBJS += 4xx_uart.o
+COBJS += gpio.o
+COBJS += miiphy.o
+COBJS += uic.o
+else
+COBJS += xilinx_irq.o
+endif
+
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/ppc/cpu/ppc4xx/bedbug_405.c b/arch/ppc/cpu/ppc4xx/bedbug_405.c
new file mode 100644
index 0000000..ef11cb6
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/bedbug_405.c
@@ -0,0 +1,308 @@
+/*
+ * Bedbug Functions specific to the PPC405 chip
+ */
+
+#include <common.h>
+#include <command.h>
+#include <linux/ctype.h>
+#include <bedbug/type.h>
+#include <bedbug/bedbug.h>
+#include <bedbug/regs.h>
+#include <bedbug/ppc.h>
+
+#if defined(CONFIG_CMD_BEDBUG) && defined(CONFIG_4xx)
+
+#define MAX_BREAK_POINTS 4
+
+extern CPU_DEBUG_CTX bug_ctx;
+
+void bedbug405_init __P ((void));
+void bedbug405_do_break __P ((cmd_tbl_t *, int, int, char *[]));
+void bedbug405_break_isr __P ((struct pt_regs *));
+int bedbug405_find_empty __P ((void));
+int bedbug405_set __P ((int, unsigned long));
+int bedbug405_clear __P ((int));
+
+
+/* ======================================================================
+ * Initialize the global bug_ctx structure for the AMCC PPC405. Clear all
+ * of the breakpoints.
+ * ====================================================================== */
+
+void bedbug405_init (void)
+{
+ int i;
+
+ /* -------------------------------------------------- */
+
+ bug_ctx.hw_debug_enabled = 0;
+ bug_ctx.stopped = 0;
+ bug_ctx.current_bp = 0;
+ bug_ctx.regs = NULL;
+
+ bug_ctx.do_break = bedbug405_do_break;
+ bug_ctx.break_isr = bedbug405_break_isr;
+ bug_ctx.find_empty = bedbug405_find_empty;
+ bug_ctx.set = bedbug405_set;
+ bug_ctx.clear = bedbug405_clear;
+
+ for (i = 1; i <= MAX_BREAK_POINTS; ++i)
+ (*bug_ctx.clear) (i);
+
+ puts ("BEDBUG:ready\n");
+ return;
+} /* bedbug_init_breakpoints */
+
+
+
+/* ======================================================================
+ * Set/clear/show one of the hardware breakpoints for the 405. The "off"
+ * string will disable a specific breakpoint. The "show" string will
+ * display the current breakpoints. Otherwise an address will set a
+ * breakpoint at that address. Setting a breakpoint uses the CPU-specific
+ * set routine which will assign a breakpoint number.
+ * ====================================================================== */
+
+void bedbug405_do_break (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ long addr = 0; /* Address to break at */
+ int which_bp; /* Breakpoint number */
+
+ /* -------------------------------------------------- */
+
+ if (argc < 2) {
+ cmd_usage(cmdtp);
+ return;
+ }
+
+ /* Turn off a breakpoint */
+
+ if (strcmp (argv[1], "off") == 0) {
+ if (bug_ctx.hw_debug_enabled == 0) {
+ printf ("No breakpoints enabled\n");
+ return;
+ }
+
+ which_bp = simple_strtoul (argv[2], NULL, 10);
+
+ if (bug_ctx.clear)
+ (*bug_ctx.clear) (which_bp);
+
+ printf ("Breakpoint %d removed\n", which_bp);
+ return;
+ }
+
+ /* Show a list of breakpoints */
+
+ if (strcmp (argv[1], "show") == 0) {
+ for (which_bp = 1; which_bp <= MAX_BREAK_POINTS; ++which_bp) {
+
+ switch (which_bp) {
+ case 1:
+ addr = GET_IAC1 ();
+ break;
+ case 2:
+ addr = GET_IAC2 ();
+ break;
+ case 3:
+ addr = GET_IAC3 ();
+ break;
+ case 4:
+ addr = GET_IAC4 ();
+ break;
+ }
+
+ printf ("Breakpoint [%d]: ", which_bp);
+ if (addr == 0)
+ printf ("NOT SET\n");
+ else
+ disppc ((unsigned char *) addr, 0, 1, bedbug_puts,
+ F_RADHEX);
+ }
+ return;
+ }
+
+ /* Set a breakpoint at the address */
+
+ if (!isdigit (argv[1][0])) {
+ cmd_usage(cmdtp);
+ return;
+ }
+
+ addr = simple_strtoul (argv[1], NULL, 16) & 0xfffffffc;
+
+ if ((bug_ctx.set) && (which_bp = (*bug_ctx.set) (0, addr)) > 0) {
+ printf ("Breakpoint [%d]: ", which_bp);
+ disppc ((unsigned char *) addr, 0, 1, bedbug_puts, F_RADHEX);
+ }
+
+ return;
+} /* bedbug405_do_break */
+
+
+
+/* ======================================================================
+ * Handle a breakpoint. First determine which breakpoint was hit by
+ * looking at the DeBug Status Register (DBSR), clear the breakpoint
+ * and enter a mini main loop. Stay in the loop until the stopped flag
+ * in the debug context is cleared.
+ * ====================================================================== */
+
+void bedbug405_break_isr (struct pt_regs *regs)
+{
+ unsigned long dbsr_val; /* Value of the DBSR */
+ unsigned long addr = 0; /* Address stopped at */
+
+ /* -------------------------------------------------- */
+
+ dbsr_val = GET_DBSR ();
+
+ if (dbsr_val & DBSR_IA1) {
+ bug_ctx.current_bp = 1;
+ addr = GET_IAC1 ();
+ SET_DBSR (DBSR_IA1); /* Write a 1 to clear */
+ } else if (dbsr_val & DBSR_IA2) {
+ bug_ctx.current_bp = 2;
+ addr = GET_IAC2 ();
+ SET_DBSR (DBSR_IA2); /* Write a 1 to clear */
+ } else if (dbsr_val & DBSR_IA3) {
+ bug_ctx.current_bp = 3;
+ addr = GET_IAC3 ();
+ SET_DBSR (DBSR_IA3); /* Write a 1 to clear */
+ } else if (dbsr_val & DBSR_IA4) {
+ bug_ctx.current_bp = 4;
+ addr = GET_IAC4 ();
+ SET_DBSR (DBSR_IA4); /* Write a 1 to clear */
+ }
+
+ bedbug_main_loop (addr, regs);
+ return;
+} /* bedbug405_break_isr */
+
+
+
+/* ======================================================================
+ * Look through all of the hardware breakpoints available to see if one
+ * is unused.
+ * ====================================================================== */
+
+int bedbug405_find_empty (void)
+{
+ /* -------------------------------------------------- */
+
+ if (GET_IAC1 () == 0)
+ return 1;
+
+ if (GET_IAC2 () == 0)
+ return 2;
+
+ if (GET_IAC3 () == 0)
+ return 3;
+
+ if (GET_IAC4 () == 0)
+ return 4;
+
+ return 0;
+} /* bedbug405_find_empty */
+
+
+
+/* ======================================================================
+ * Set a breakpoint. If 'which_bp' is zero then find an unused breakpoint
+ * number, otherwise reassign the given breakpoint. If hardware debugging
+ * is not enabled, then turn it on via the MSR and DBCR0. Set the break
+ * address in the appropriate IACx register and enable proper address
+ * beakpoint in DBCR0.
+ * ====================================================================== */
+
+int bedbug405_set (int which_bp, unsigned long addr)
+{
+ /* -------------------------------------------------- */
+
+ /* Only look if which_bp == 0, else use which_bp */
+ if ((bug_ctx.find_empty) && (!which_bp) &&
+ (which_bp = (*bug_ctx.find_empty) ()) == 0) {
+ printf ("All breakpoints in use\n");
+ return 0;
+ }
+
+ if (which_bp < 1 || which_bp > MAX_BREAK_POINTS) {
+ printf ("Invalid break point # %d\n", which_bp);
+ return 0;
+ }
+
+ if (!bug_ctx.hw_debug_enabled) {
+ SET_MSR (GET_MSR () | 0x200); /* set MSR[ DE ] */
+ SET_DBCR0 (GET_DBCR0 () | DBCR0_IDM);
+ bug_ctx.hw_debug_enabled = 1;
+ }
+
+ switch (which_bp) {
+ case 1:
+ SET_IAC1 (addr);
+ SET_DBCR0 (GET_DBCR0 () | DBCR0_IA1);
+ break;
+
+ case 2:
+ SET_IAC2 (addr);
+ SET_DBCR0 (GET_DBCR0 () | DBCR0_IA2);
+ break;
+
+ case 3:
+ SET_IAC3 (addr);
+ SET_DBCR0 (GET_DBCR0 () | DBCR0_IA3);
+ break;
+
+ case 4:
+ SET_IAC4 (addr);
+ SET_DBCR0 (GET_DBCR0 () | DBCR0_IA4);
+ break;
+ }
+
+ return which_bp;
+} /* bedbug405_set */
+
+
+
+/* ======================================================================
+ * Disable a specific breakoint by setting the appropriate IACx register
+ * to zero and claring the instruction address breakpoint in DBCR0.
+ * ====================================================================== */
+
+int bedbug405_clear (int which_bp)
+{
+ /* -------------------------------------------------- */
+
+ if (which_bp < 1 || which_bp > MAX_BREAK_POINTS) {
+ printf ("Invalid break point # (%d)\n", which_bp);
+ return -1;
+ }
+
+ switch (which_bp) {
+ case 1:
+ SET_IAC1 (0);
+ SET_DBCR0 (GET_DBCR0 () & ~DBCR0_IA1);
+ break;
+
+ case 2:
+ SET_IAC2 (0);
+ SET_DBCR0 (GET_DBCR0 () & ~DBCR0_IA2);
+ break;
+
+ case 3:
+ SET_IAC3 (0);
+ SET_DBCR0 (GET_DBCR0 () & ~DBCR0_IA3);
+ break;
+
+ case 4:
+ SET_IAC4 (0);
+ SET_DBCR0 (GET_DBCR0 () & ~DBCR0_IA4);
+ break;
+ }
+
+ return 0;
+} /* bedbug405_clear */
+
+
+/* ====================================================================== */
+#endif
diff --git a/arch/ppc/cpu/ppc4xx/cache.S b/arch/ppc/cpu/ppc4xx/cache.S
new file mode 100644
index 0000000..269716f
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/cache.S
@@ -0,0 +1,235 @@
+/*
+ * This file contains miscellaneous low-level functions.
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Largely rewritten by Cort Dougan (cort@cs.nmt.edu)
+ * and Paul Mackerras.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <config.h>
+#include <config.h>
+#include <ppc4xx.h>
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+/*
+ * Flush instruction cache.
+ */
+_GLOBAL(invalidate_icache)
+ iccci r0,r0
+ isync
+ blr
+
+/*
+ * Write any modified data cache blocks out to memory
+ * and invalidate the corresponding instruction cache blocks.
+ *
+ * flush_icache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(flush_icache_range)
+ li r5,L1_CACHE_BYTES-1
+ andc r3,r3,r5
+ subf r4,r3,r4
+ add r4,r4,r5
+ srwi. r4,r4,L1_CACHE_SHIFT
+ beqlr
+ mtctr r4
+ mr r6,r3
+1: dcbst 0,r3
+ addi r3,r3,L1_CACHE_BYTES
+ bdnz 1b
+ sync /* wait for dcbst's to get to ram */
+ mtctr r4
+2: icbi 0,r6
+ addi r6,r6,L1_CACHE_BYTES
+ bdnz 2b
+ sync /* additional sync needed on g4 */
+ isync
+ blr
+
+/*
+ * Write any modified data cache blocks out to memory.
+ * Does not invalidate the corresponding cache lines (especially for
+ * any corresponding instruction cache).
+ *
+ * clean_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(clean_dcache_range)
+ li r5,L1_CACHE_BYTES-1
+ andc r3,r3,r5
+ subf r4,r3,r4
+ add r4,r4,r5
+ srwi. r4,r4,L1_CACHE_SHIFT
+ beqlr
+ mtctr r4
+
+1: dcbst 0,r3
+ addi r3,r3,L1_CACHE_BYTES
+ bdnz 1b
+ sync /* wait for dcbst's to get to ram */
+ blr
+
+/*
+ * Write any modified data cache blocks out to memory and invalidate them.
+ * Does not invalidate the corresponding instruction cache blocks.
+ *
+ * flush_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(flush_dcache_range)
+ li r5,L1_CACHE_BYTES-1
+ andc r3,r3,r5
+ subf r4,r3,r4
+ add r4,r4,r5
+ srwi. r4,r4,L1_CACHE_SHIFT
+ beqlr
+ mtctr r4
+
+1: dcbf 0,r3
+ addi r3,r3,L1_CACHE_BYTES
+ bdnz 1b
+ sync /* wait for dcbst's to get to ram */
+ blr
+
+/*
+ * Like above, but invalidate the D-cache. This is used by the 8xx
+ * to invalidate the cache so the PPC core doesn't get stale data
+ * from the CPM (no cache snooping here :-).
+ *
+ * invalidate_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(invalidate_dcache_range)
+ li r5,L1_CACHE_BYTES-1
+ andc r3,r3,r5
+ subf r4,r3,r4
+ add r4,r4,r5
+ srwi. r4,r4,L1_CACHE_SHIFT
+ beqlr
+ mtctr r4
+
+1: dcbi 0,r3
+ addi r3,r3,L1_CACHE_BYTES
+ bdnz 1b
+ sync /* wait for dcbi's to get to ram */
+ blr
+
+/*
+ * 40x cores have 8K or 16K dcache and 32 byte line size.
+ * 44x has a 32K dcache and 32 byte line size.
+ * 8xx has 1, 2, 4, 8K variants.
+ * For now, cover the worst case of the 44x.
+ * Must be called with external interrupts disabled.
+ */
+#define CACHE_NWAYS 64
+#define CACHE_NLINES 32
+
+_GLOBAL(flush_dcache)
+ li r4,(2 * CACHE_NWAYS * CACHE_NLINES)
+ mtctr r4
+ lis r5,0
+1: lwz r3,0(r5) /* Load one word from every line */
+ addi r5,r5,L1_CACHE_BYTES
+ bdnz 1b
+ sync
+ blr
+
+_GLOBAL(invalidate_dcache)
+ addi r6,0,0x0000 /* clear GPR 6 */
+ /* Do loop for # of dcache congruence classes. */
+ lis r7,(CONFIG_SYS_DCACHE_SIZE / L1_CACHE_BYTES / 2)@ha /* TBS for large sized cache */
+ ori r7,r7,(CONFIG_SYS_DCACHE_SIZE / L1_CACHE_BYTES / 2)@l
+ /* NOTE: dccci invalidates both */
+ mtctr r7 /* ways in the D cache */
+..dcloop:
+ dccci 0,r6 /* invalidate line */
+ addi r6,r6,L1_CACHE_BYTES /* bump to next line */
+ bdnz ..dcloop
+ sync
+ blr
+
+/*
+ * Cache functions.
+ *
+ * NOTE: currently the 440s run with dcache _disabled_ once relocated to DRAM,
+ * although for some cache-ralated calls stubs have to be provided to satisfy
+ * symbols resolution.
+ * Icache-related functions are used in POST framework.
+ *
+ */
+#ifdef CONFIG_440
+
+ .globl dcache_disable
+ .globl dcache_enable
+ .globl icache_disable
+ .globl icache_enable
+dcache_disable:
+dcache_enable:
+icache_disable:
+icache_enable:
+ blr
+
+ .globl dcache_status
+ .globl icache_status
+dcache_status:
+icache_status:
+ mr r3, 0
+ blr
+
+#else /* CONFIG_440 */
+
+ .globl icache_enable
+icache_enable:
+ mflr r8
+ bl invalidate_icache
+ mtlr r8
+ isync
+ addis r3,r0, 0xc000 /* set bit 0 */
+ mticcr r3
+ blr
+
+ .globl icache_disable
+icache_disable:
+ addis r3,r0, 0x0000 /* clear bit 0 */
+ mticcr r3
+ isync
+ blr
+
+ .globl icache_status
+icache_status:
+ mficcr r3
+ srwi r3, r3, 31 /* >>31 => select bit 0 */
+ blr
+
+ .globl dcache_enable
+dcache_enable:
+ mflr r8
+ bl invalidate_dcache
+ mtlr r8
+ isync
+ addis r3,r0, 0x8000 /* set bit 0 */
+ mtdccr r3
+ blr
+
+ .globl dcache_disable
+dcache_disable:
+ mflr r8
+ bl flush_dcache
+ mtlr r8
+ addis r3,r0, 0x0000 /* clear bit 0 */
+ mtdccr r3
+ blr
+
+ .globl dcache_status
+dcache_status:
+ mfdccr r3
+ srwi r3, r3, 31 /* >>31 => select bit 0 */
+ blr
+
+#endif /* CONFIG_440 */
diff --git a/arch/ppc/cpu/ppc4xx/cmd_chip_config.c b/arch/ppc/cpu/ppc4xx/cmd_chip_config.c
new file mode 100644
index 0000000..ba57211
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/cmd_chip_config.c
@@ -0,0 +1,148 @@
+/*
+ * (C) Copyright 2008-2009
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2009
+ * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+#include <asm/ppc4xx_config.h>
+#include <asm/io.h>
+
+static void print_configs(int cur_config_nr)
+{
+ int i;
+
+ for (i = 0; i < ppc4xx_config_count; i++) {
+ printf("%-16s - %s", ppc4xx_config_val[i].label,
+ ppc4xx_config_val[i].description);
+ if (i == cur_config_nr)
+ printf(" ***");
+ printf("\n");
+ }
+
+}
+
+static int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ int i;
+ int ret;
+ int cur_config_nr = -1;
+ u8 cur_config[CONFIG_4xx_CONFIG_BLOCKSIZE];
+
+ /*
+ * First switch to correct I2C bus. This is I2C bus 0
+ * for all currently available 4xx derivats.
+ */
+ I2C_SET_BUS(0);
+
+#ifdef CONFIG_CMD_EEPROM
+ ret = eeprom_read(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
+ CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET,
+ cur_config, CONFIG_4xx_CONFIG_BLOCKSIZE);
+#else
+ ret = i2c_read(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
+ CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET,
+ 1, cur_config, CONFIG_4xx_CONFIG_BLOCKSIZE);
+#endif
+ if (ret) {
+ printf("Error reading EEPROM at addr 0x%x\n",
+ CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR);
+ return -1;
+ }
+
+ /*
+ * Search the current configuration
+ */
+ for (i = 0; i < ppc4xx_config_count; i++) {
+ if (memcmp(cur_config, ppc4xx_config_val[i].val,
+ CONFIG_4xx_CONFIG_BLOCKSIZE) == 0)
+ cur_config_nr = i;
+ }
+
+ if (cur_config_nr == -1) {
+ printf("Warning: The I2C bootstrap values don't match any"
+ " of the available options!\n");
+ printf("I2C bootstrap EEPROM values are (I2C address 0x%02x):\n",
+ CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR);
+ for (i = 0; i < CONFIG_4xx_CONFIG_BLOCKSIZE; i++) {
+ printf("%02x ", cur_config[i]);
+ }
+ printf("\n");
+ }
+
+ if (argc < 2) {
+ printf("Available configurations (I2C address 0x%02x):\n",
+ CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR);
+ print_configs(cur_config_nr);
+ return 0;
+ }
+
+ for (i = 0; i < ppc4xx_config_count; i++) {
+ /*
+ * Search for configuration name/label
+ */
+ if (strcmp(argv[1], ppc4xx_config_val[i].label) == 0) {
+ printf("Using configuration:\n%-16s - %s\n",
+ ppc4xx_config_val[i].label,
+ ppc4xx_config_val[i].description);
+
+#ifdef CONFIG_CMD_EEPROM
+ ret = eeprom_write(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
+ CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET,
+ ppc4xx_config_val[i].val,
+ CONFIG_4xx_CONFIG_BLOCKSIZE);
+#else
+ ret = i2c_write(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
+ CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET,
+ 1, ppc4xx_config_val[i].val,
+ CONFIG_4xx_CONFIG_BLOCKSIZE);
+#endif
+ udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+ if (ret) {
+ printf("Error updating EEPROM at addr 0x%x\n",
+ CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR);
+ return -1;
+ }
+
+ printf("done (dump via 'i2c md %x 0.1 %x')\n",
+ CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
+ CONFIG_4xx_CONFIG_BLOCKSIZE);
+ printf("Reset the board for the changes to"
+ " take effect\n");
+ return 0;
+ }
+ }
+
+ printf("Configuration %s not found!\n", argv[1]);
+ print_configs(cur_config_nr);
+ return -1;
+}
+
+U_BOOT_CMD(
+ chip_config, 2, 0, do_chip_config,
+ "program the I2C bootstrap EEPROM",
+ "[config-label]"
+);
diff --git a/arch/ppc/cpu/ppc4xx/commproc.c b/arch/ppc/cpu/ppc4xx/commproc.c
new file mode 100644
index 0000000..a1696d3
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/commproc.c
@@ -0,0 +1,77 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ *
+ * Atapted for ppc4XX by Denis Peter
+ */
+
+#include <common.h>
+#include <commproc.h>
+#include <asm/io.h>
+
+#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
+
+#if defined(CONFIG_SYS_POST_WORD_ADDR)
+# define _POST_ADDR ((CONFIG_SYS_OCM_DATA_ADDR) + (CONFIG_SYS_POST_WORD_ADDR))
+#elif defined(CONFIG_SYS_POST_ALT_WORD_ADDR)
+# define _POST_ADDR (CONFIG_SYS_POST_ALT_WORD_ADDR)
+#endif
+
+void post_word_store (ulong a)
+{
+ volatile void *save_addr = (volatile void *)(_POST_ADDR);
+
+ out_be32(save_addr, a);
+}
+
+ulong post_word_load (void)
+{
+ volatile void *save_addr = (volatile void *)(_POST_ADDR);
+
+ return in_be32(save_addr);
+}
+
+#endif /* CONFIG_POST || CONFIG_LOGBUFFER*/
+
+#ifdef CONFIG_BOOTCOUNT_LIMIT
+
+void bootcount_store (ulong a)
+{
+ volatile ulong *save_addr =
+ (volatile ulong *)(CONFIG_SYS_OCM_DATA_ADDR + CONFIG_SYS_BOOTCOUNT_ADDR);
+
+ save_addr[0] = a;
+ save_addr[1] = BOOTCOUNT_MAGIC;
+}
+
+ulong bootcount_load (void)
+{
+ volatile ulong *save_addr =
+ (volatile ulong *)(CONFIG_SYS_OCM_DATA_ADDR + CONFIG_SYS_BOOTCOUNT_ADDR);
+
+ if (save_addr[1] != BOOTCOUNT_MAGIC)
+ return 0;
+ else
+ return save_addr[0];
+}
+
+#endif /* CONFIG_BOOTCOUNT_LIMIT */
diff --git a/arch/ppc/cpu/ppc4xx/config.mk b/arch/ppc/cpu/ppc4xx/config.mk
new file mode 100644
index 0000000..ea4d707
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/config.mk
@@ -0,0 +1,37 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS += -fPIC -meabi
+PLATFORM_CPPFLAGS += -DCONFIG_4xx -ffixed-r2 -mstring -msoft-float
+
+cfg=$(shell grep configs $(OBJTREE)/include/config.h | sed 's/.*<\(configs.*\)>/\1/')
+is440:=$(shell grep CONFIG_440 $(TOPDIR)/include/$(cfg))
+
+ifneq (,$(findstring CONFIG_440,$(is440)))
+PLATFORM_CPPFLAGS += -Wa,-m440 -mcpu=440
+else
+PLATFORM_CPPFLAGS += -Wa,-m405 -mcpu=405
+endif
+
+# Use default linker script. Board port can override in board/*/config.mk
+LDSCRIPT := $(SRCTREE)/arch/ppc/cpu/ppc4xx/u-boot.lds
diff --git a/arch/ppc/cpu/ppc4xx/cpu.c b/arch/ppc/cpu/ppc4xx/cpu.c
new file mode 100644
index 0000000..e1a023b
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/cpu.c
@@ -0,0 +1,754 @@
+/*
+ * (C) Copyright 2000-2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * CPU specific code
+ *
+ * written or collected and sometimes rewritten by
+ * Magnus Damm <damm@bitsmart.com>
+ *
+ * minor modifications by
+ * Wolfgang Denk <wd@denx.de>
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <asm/cache.h>
+#include <ppc4xx.h>
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void board_reset(void);
+
+/*
+ * To provide an interface to detect CPU number for boards that support
+ * more then one CPU, we implement the "weak" default functions here.
+ *
+ * Returns CPU number
+ */
+int __get_cpu_num(void)
+{
+ return NA_OR_UNKNOWN_CPU;
+}
+int get_cpu_num(void) __attribute__((weak, alias("__get_cpu_num")));
+
+#if defined(CONFIG_PCI)
+#if defined(CONFIG_405GP) || \
+ defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+
+#define PCI_ASYNC
+
+static int pci_async_enabled(void)
+{
+#if defined(CONFIG_405GP)
+ return (mfdcr(CPC0_PSR) & PSR_PCI_ASYNC_EN);
+#endif
+
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ unsigned long val;
+
+ mfsdr(SDR0_SDSTP1, val);
+ return (val & SDR0_SDSTP1_PAME_MASK);
+#endif
+}
+#endif
+#endif /* CONFIG_PCI */
+
+#if defined(CONFIG_PCI) && !defined(CONFIG_IOP480) && \
+ !defined(CONFIG_405) && !defined(CONFIG_405EX)
+int pci_arbiter_enabled(void)
+{
+#if defined(CONFIG_405GP)
+ return (mfdcr(CPC0_PSR) & PSR_PCI_ARBIT_EN);
+#endif
+
+#if defined(CONFIG_405EP)
+ return (mfdcr(CPC0_PCI) & CPC0_PCI_ARBIT_EN);
+#endif
+
+#if defined(CONFIG_440GP)
+ return (mfdcr(CPC0_STRP1) & CPC0_STRP1_PAE_MASK);
+#endif
+
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+ unsigned long val;
+
+ mfsdr(SDR0_XCR, val);
+ return (val & 0x80000000);
+#endif
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ unsigned long val;
+
+ mfsdr(SDR0_PCI0, val);
+ return (val & 0x80000000);
+#endif
+}
+#endif
+
+#if defined(CONFIG_405EP)
+#define I2C_BOOTROM
+
+static int i2c_bootrom_enabled(void)
+{
+#if defined(CONFIG_405EP)
+ return (mfdcr(CPC0_BOOT) & CPC0_BOOT_SEP);
+#else
+ unsigned long val;
+
+ mfsdr(SDR0_SDCS0, val);
+ return (val & SDR0_SDCS_SDD);
+#endif
+}
+#endif
+
+#if defined(CONFIG_440GX)
+#define SDR0_PINSTP_SHIFT 29
+static char *bootstrap_str[] = {
+ "EBC (16 bits)",
+ "EBC (8 bits)",
+ "EBC (32 bits)",
+ "EBC (8 bits)",
+ "PCI",
+ "I2C (Addr 0x54)",
+ "Reserved",
+ "I2C (Addr 0x50)",
+};
+static char bootstrap_char[] = { 'A', 'B', 'C', 'B', 'D', 'E', 'x', 'F' };
+#endif
+
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#define SDR0_PINSTP_SHIFT 30
+static char *bootstrap_str[] = {
+ "EBC (8 bits)",
+ "PCI",
+ "I2C (Addr 0x54)",
+ "I2C (Addr 0x50)",
+};
+static char bootstrap_char[] = { 'A', 'B', 'C', 'D'};
+#endif
+
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#define SDR0_PINSTP_SHIFT 29
+static char *bootstrap_str[] = {
+ "EBC (8 bits)",
+ "PCI",
+ "NAND (8 bits)",
+ "EBC (16 bits)",
+ "EBC (16 bits)",
+ "I2C (Addr 0x54)",
+ "PCI",
+ "I2C (Addr 0x52)",
+};
+static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' };
+#endif
+
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define SDR0_PINSTP_SHIFT 29
+static char *bootstrap_str[] = {
+ "EBC (8 bits)",
+ "EBC (16 bits)",
+ "EBC (16 bits)",
+ "NAND (8 bits)",
+ "PCI",
+ "I2C (Addr 0x54)",
+ "PCI",
+ "I2C (Addr 0x52)",
+};
+static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' };
+#endif
+
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define SDR0_PINSTP_SHIFT 29
+static char *bootstrap_str[] = {
+ "EBC (8 bits)",
+ "EBC (16 bits)",
+ "PCI",
+ "PCI",
+ "EBC (16 bits)",
+ "NAND (8 bits)",
+ "I2C (Addr 0x54)", /* A8 */
+ "I2C (Addr 0x52)", /* A4 */
+};
+static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H' };
+#endif
+
+#if defined(CONFIG_460SX)
+#define SDR0_PINSTP_SHIFT 29
+static char *bootstrap_str[] = {
+ "EBC (8 bits)",
+ "EBC (16 bits)",
+ "EBC (32 bits)",
+ "NAND (8 bits)",
+ "I2C (Addr 0x54)", /* A8 */
+ "I2C (Addr 0x52)", /* A4 */
+};
+static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G' };
+#endif
+
+#if defined(CONFIG_405EZ)
+#define SDR0_PINSTP_SHIFT 28
+static char *bootstrap_str[] = {
+ "EBC (8 bits)",
+ "SPI (fast)",
+ "NAND (512 page, 4 addr cycle)",
+ "I2C (Addr 0x50)",
+ "EBC (32 bits)",
+ "I2C (Addr 0x50)",
+ "NAND (2K page, 5 addr cycle)",
+ "I2C (Addr 0x50)",
+ "EBC (16 bits)",
+ "Reserved",
+ "NAND (2K page, 4 addr cycle)",
+ "I2C (Addr 0x50)",
+ "NAND (512 page, 3 addr cycle)",
+ "I2C (Addr 0x50)",
+ "SPI (slow)",
+ "I2C (Addr 0x50)",
+};
+static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H', \
+ 'I', 'x', 'K', 'L', 'M', 'N', 'O', 'P' };
+#endif
+
+#if defined(CONFIG_405EX)
+#define SDR0_PINSTP_SHIFT 29
+static char *bootstrap_str[] = {
+ "EBC (8 bits)",
+ "EBC (16 bits)",
+ "EBC (16 bits)",
+ "NAND (8 bits)",
+ "NAND (8 bits)",
+ "I2C (Addr 0x54)",
+ "EBC (8 bits)",
+ "I2C (Addr 0x52)",
+};
+static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' };
+#endif
+
+#if defined(SDR0_PINSTP_SHIFT)
+static int bootstrap_option(void)
+{
+ unsigned long val;
+
+ mfsdr(SDR0_PINSTP, val);
+ return ((val & 0xf0000000) >> SDR0_PINSTP_SHIFT);
+}
+#endif /* SDR0_PINSTP_SHIFT */
+
+
+#if defined(CONFIG_440)
+static int do_chip_reset (unsigned long sys0, unsigned long sys1)
+{
+ /* Changes to CPC0_SYS0 and CPC0_SYS1 require chip
+ * reset.
+ */
+ mtdcr (CPC0_CR0, mfdcr (CPC0_CR0) | 0x80000000); /* Set SWE */
+ mtdcr (CPC0_SYS0, sys0);
+ mtdcr (CPC0_SYS1, sys1);
+ mtdcr (CPC0_CR0, mfdcr (CPC0_CR0) & ~0x80000000); /* Clr SWE */
+ mtspr (SPRN_DBCR0, 0x20000000); /* Reset the chip */
+
+ return 1;
+}
+#endif
+
+
+int checkcpu (void)
+{
+#if !defined(CONFIG_405) /* not used on Xilinx 405 FPGA implementations */
+ uint pvr = get_pvr();
+ ulong clock = gd->cpu_clk;
+ char buf[32];
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ u32 reg;
+#endif
+
+#if !defined(CONFIG_IOP480)
+ char addstr[64] = "";
+ sys_info_t sys_info;
+ int cpu_num;
+
+ cpu_num = get_cpu_num();
+ if (cpu_num >= 0)
+ printf("CPU%d: ", cpu_num);
+ else
+ puts("CPU: ");
+
+ get_sys_info(&sys_info);
+
+#if defined(CONFIG_XILINX_440)
+ puts("IBM PowerPC 4");
+#else
+ puts("AMCC PowerPC 4");
+#endif
+
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
+ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
+ defined(CONFIG_405EX)
+ puts("05");
+#endif
+#if defined(CONFIG_440)
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ puts("60");
+#else
+ puts("40");
+#endif
+#endif
+
+ switch (pvr) {
+ case PVR_405GP_RB:
+ puts("GP Rev. B");
+ break;
+
+ case PVR_405GP_RC:
+ puts("GP Rev. C");
+ break;
+
+ case PVR_405GP_RD:
+ puts("GP Rev. D");
+ break;
+
+#ifdef CONFIG_405GP
+ case PVR_405GP_RE: /* 405GP rev E and 405CR rev C have same PVR */
+ puts("GP Rev. E");
+ break;
+#endif
+
+ case PVR_405CR_RA:
+ puts("CR Rev. A");
+ break;
+
+ case PVR_405CR_RB:
+ puts("CR Rev. B");
+ break;
+
+#ifdef CONFIG_405CR
+ case PVR_405CR_RC: /* 405GP rev E and 405CR rev C have same PVR */
+ puts("CR Rev. C");
+ break;
+#endif
+
+ case PVR_405GPR_RB:
+ puts("GPr Rev. B");
+ break;
+
+ case PVR_405EP_RB:
+ puts("EP Rev. B");
+ break;
+
+ case PVR_405EZ_RA:
+ puts("EZ Rev. A");
+ break;
+
+ case PVR_405EX1_RA:
+ puts("EX Rev. A");
+ strcpy(addstr, "Security support");
+ break;
+
+ case PVR_405EXR2_RA:
+ puts("EXr Rev. A");
+ strcpy(addstr, "No Security support");
+ break;
+
+ case PVR_405EX1_RC:
+ puts("EX Rev. C");
+ strcpy(addstr, "Security support");
+ break;
+
+ case PVR_405EX2_RC:
+ puts("EX Rev. C");
+ strcpy(addstr, "No Security support");
+ break;
+
+ case PVR_405EXR1_RC:
+ puts("EXr Rev. C");
+ strcpy(addstr, "Security support");
+ break;
+
+ case PVR_405EXR2_RC:
+ puts("EXr Rev. C");
+ strcpy(addstr, "No Security support");
+ break;
+
+ case PVR_405EX1_RD:
+ puts("EX Rev. D");
+ strcpy(addstr, "Security support");
+ break;
+
+ case PVR_405EX2_RD:
+ puts("EX Rev. D");
+ strcpy(addstr, "No Security support");
+ break;
+
+ case PVR_405EXR1_RD:
+ puts("EXr Rev. D");
+ strcpy(addstr, "Security support");
+ break;
+
+ case PVR_405EXR2_RD:
+ puts("EXr Rev. D");
+ strcpy(addstr, "No Security support");
+ break;
+
+#if defined(CONFIG_440)
+ case PVR_440GP_RB:
+ puts("GP Rev. B");
+ /* See errata 1.12: CHIP_4 */
+ if ((mfdcr(CPC0_SYS0) != mfdcr(CPC0_STRP0)) ||
+ (mfdcr(CPC0_SYS1) != mfdcr(CPC0_STRP1)) ){
+ puts ( "\n\t CPC0_SYSx DCRs corrupted. "
+ "Resetting chip ...\n");
+ udelay( 1000 * 1000 ); /* Give time for serial buf to clear */
+ do_chip_reset ( mfdcr(CPC0_STRP0),
+ mfdcr(CPC0_STRP1) );
+ }
+ break;
+
+ case PVR_440GP_RC:
+ puts("GP Rev. C");
+ break;
+
+ case PVR_440GX_RA:
+ puts("GX Rev. A");
+ break;
+
+ case PVR_440GX_RB:
+ puts("GX Rev. B");
+ break;
+
+ case PVR_440GX_RC:
+ puts("GX Rev. C");
+ break;
+
+ case PVR_440GX_RF:
+ puts("GX Rev. F");
+ break;
+
+ case PVR_440EP_RA:
+ puts("EP Rev. A");
+ break;
+
+#ifdef CONFIG_440EP
+ case PVR_440EP_RB: /* 440EP rev B and 440GR rev A have same PVR */
+ puts("EP Rev. B");
+ break;
+
+ case PVR_440EP_RC: /* 440EP rev C and 440GR rev B have same PVR */
+ puts("EP Rev. C");
+ break;
+#endif /* CONFIG_440EP */
+
+#ifdef CONFIG_440GR
+ case PVR_440GR_RA: /* 440EP rev B and 440GR rev A have same PVR */
+ puts("GR Rev. A");
+ break;
+
+ case PVR_440GR_RB: /* 440EP rev C and 440GR rev B have same PVR */
+ puts("GR Rev. B");
+ break;
+#endif /* CONFIG_440GR */
+#endif /* CONFIG_440 */
+
+#ifdef CONFIG_440EPX
+ case PVR_440EPX1_RA: /* 440EPx rev A and 440GRx rev A have same PVR */
+ puts("EPx Rev. A");
+ strcpy(addstr, "Security/Kasumi support");
+ break;
+
+ case PVR_440EPX2_RA: /* 440EPx rev A and 440GRx rev A have same PVR */
+ puts("EPx Rev. A");
+ strcpy(addstr, "No Security/Kasumi support");
+ break;
+#endif /* CONFIG_440EPX */
+
+#ifdef CONFIG_440GRX
+ case PVR_440GRX1_RA: /* 440EPx rev A and 440GRx rev A have same PVR */
+ puts("GRx Rev. A");
+ strcpy(addstr, "Security/Kasumi support");
+ break;
+
+ case PVR_440GRX2_RA: /* 440EPx rev A and 440GRx rev A have same PVR */
+ puts("GRx Rev. A");
+ strcpy(addstr, "No Security/Kasumi support");
+ break;
+#endif /* CONFIG_440GRX */
+
+ case PVR_440SP_6_RAB:
+ puts("SP Rev. A/B");
+ strcpy(addstr, "RAID 6 support");
+ break;
+
+ case PVR_440SP_RAB:
+ puts("SP Rev. A/B");
+ strcpy(addstr, "No RAID 6 support");
+ break;
+
+ case PVR_440SP_6_RC:
+ puts("SP Rev. C");
+ strcpy(addstr, "RAID 6 support");
+ break;
+
+ case PVR_440SP_RC:
+ puts("SP Rev. C");
+ strcpy(addstr, "No RAID 6 support");
+ break;
+
+ case PVR_440SPe_6_RA:
+ puts("SPe Rev. A");
+ strcpy(addstr, "RAID 6 support");
+ break;
+
+ case PVR_440SPe_RA:
+ puts("SPe Rev. A");
+ strcpy(addstr, "No RAID 6 support");
+ break;
+
+ case PVR_440SPe_6_RB:
+ puts("SPe Rev. B");
+ strcpy(addstr, "RAID 6 support");
+ break;
+
+ case PVR_440SPe_RB:
+ puts("SPe Rev. B");
+ strcpy(addstr, "No RAID 6 support");
+ break;
+
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ case PVR_460EX_RA:
+ puts("EX Rev. A");
+ strcpy(addstr, "No Security/Kasumi support");
+ break;
+
+ case PVR_460EX_SE_RA:
+ puts("EX Rev. A");
+ strcpy(addstr, "Security/Kasumi support");
+ break;
+
+ case PVR_460EX_RB:
+ puts("EX Rev. B");
+ mfsdr(SDR0_ECID3, reg);
+ if (reg & 0x00100000)
+ strcpy(addstr, "No Security/Kasumi support");
+ else
+ strcpy(addstr, "Security/Kasumi support");
+ break;
+
+ case PVR_460GT_RA:
+ puts("GT Rev. A");
+ strcpy(addstr, "No Security/Kasumi support");
+ break;
+
+ case PVR_460GT_SE_RA:
+ puts("GT Rev. A");
+ strcpy(addstr, "Security/Kasumi support");
+ break;
+
+ case PVR_460GT_RB:
+ puts("GT Rev. B");
+ mfsdr(SDR0_ECID3, reg);
+ if (reg & 0x00100000)
+ strcpy(addstr, "No Security/Kasumi support");
+ else
+ strcpy(addstr, "Security/Kasumi support");
+ break;
+#endif
+
+ case PVR_460SX_RA:
+ puts("SX Rev. A");
+ strcpy(addstr, "Security support");
+ break;
+
+ case PVR_460SX_RA_V1:
+ puts("SX Rev. A");
+ strcpy(addstr, "No Security support");
+ break;
+
+ case PVR_460GX_RA:
+ puts("GX Rev. A");
+ strcpy(addstr, "Security support");
+ break;
+
+ case PVR_460GX_RA_V1:
+ puts("GX Rev. A");
+ strcpy(addstr, "No Security support");
+ break;
+
+ case PVR_VIRTEX5:
+ puts("x5 VIRTEX5");
+ break;
+
+ default:
+ printf (" UNKNOWN (PVR=%08x)", pvr);
+ break;
+ }
+
+ printf (" at %s MHz (PLB=%lu OPB=%lu EBC=%lu",
+ strmhz(buf, clock),
+ sys_info.freqPLB / 1000000,
+ get_OPB_freq() / 1000000,
+ sys_info.freqEBC / 1000000);
+#if defined(CONFIG_PCI) && \
+ (defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440GRX))
+ printf(" PCI=%lu MHz", sys_info.freqPCI / 1000000);
+#endif
+ printf(")\n");
+
+ if (addstr[0] != 0)
+ printf(" %s\n", addstr);
+
+#if defined(I2C_BOOTROM)
+ printf (" I2C boot EEPROM %sabled\n", i2c_bootrom_enabled() ? "en" : "dis");
+#endif /* I2C_BOOTROM */
+#if defined(SDR0_PINSTP_SHIFT)
+ printf (" Bootstrap Option %c - ", bootstrap_char[bootstrap_option()]);
+ printf ("Boot ROM Location %s", bootstrap_str[bootstrap_option()]);
+#ifdef CONFIG_NAND_U_BOOT
+ puts(", booting from NAND");
+#endif /* CONFIG_NAND_U_BOOT */
+ putc('\n');
+#endif /* SDR0_PINSTP_SHIFT */
+
+#if defined(CONFIG_PCI) && !defined(CONFIG_405EX)
+ printf (" Internal PCI arbiter %sabled", pci_arbiter_enabled() ? "en" : "dis");
+#endif
+
+#if defined(CONFIG_PCI) && defined(PCI_ASYNC)
+ if (pci_async_enabled()) {
+ printf (", PCI async ext clock used");
+ } else {
+ printf (", PCI sync clock at %lu MHz",
+ sys_info.freqPLB / sys_info.pllPciDiv / 1000000);
+ }
+#endif
+
+#if defined(CONFIG_PCI) && !defined(CONFIG_405EX)
+ putc('\n');
+#endif
+
+#if defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_405EX)
+ printf (" 16 kB I-Cache 16 kB D-Cache");
+#elif defined(CONFIG_440)
+ printf (" 32 kB I-Cache 32 kB D-Cache");
+#else
+ printf (" 16 kB I-Cache %d kB D-Cache",
+ ((pvr | 0x00000001) == PVR_405GPR_RB) ? 16 : 8);
+#endif
+#endif /* !defined(CONFIG_IOP480) */
+
+#if defined(CONFIG_IOP480)
+ printf ("PLX IOP480 (PVR=%08x)", pvr);
+ printf (" at %s MHz:", strmhz(buf, clock));
+ printf (" %u kB I-Cache", 4);
+ printf (" %u kB D-Cache", 2);
+#endif
+
+#endif /* !defined(CONFIG_405) */
+
+ putc ('\n');
+
+ return 0;
+}
+
+int ppc440spe_revB() {
+ unsigned int pvr;
+
+ pvr = get_pvr();
+ if ((pvr == PVR_440SPe_6_RB) || (pvr == PVR_440SPe_RB))
+ return 1;
+ else
+ return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+#if defined(CONFIG_BOARD_RESET)
+ board_reset();
+#else
+#if defined(CONFIG_SYS_4xx_RESET_TYPE)
+ mtspr(SPRN_DBCR0, CONFIG_SYS_4xx_RESET_TYPE << 28);
+#else
+ /*
+ * Initiate system reset in debug control register DBCR
+ */
+ mtspr(SPRN_DBCR0, 0x30000000);
+#endif /* defined(CONFIG_SYS_4xx_RESET_TYPE) */
+#endif /* defined(CONFIG_BOARD_RESET) */
+
+ return 1;
+}
+
+
+/*
+ * Get timebase clock frequency
+ */
+unsigned long get_tbclk (void)
+{
+#if !defined(CONFIG_IOP480)
+ sys_info_t sys_info;
+
+ get_sys_info(&sys_info);
+ return (sys_info.freqProcessor);
+#else
+ return (66000000);
+#endif
+
+}
+
+
+#if defined(CONFIG_WATCHDOG)
+void watchdog_reset(void)
+{
+ int re_enable = disable_interrupts();
+ reset_4xx_watchdog();
+ if (re_enable) enable_interrupts();
+}
+
+void reset_4xx_watchdog(void)
+{
+ /*
+ * Clear TSR(WIS) bit
+ */
+ mtspr(SPRN_TSR, 0x40000000);
+}
+#endif /* CONFIG_WATCHDOG */
+
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
+ */
+int cpu_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_PPC4xx_EMAC)
+ ppc_4xx_eth_initialize(bis);
+#endif
+ return 0;
+}
diff --git a/arch/ppc/cpu/ppc4xx/cpu_init.c b/arch/ppc/cpu/ppc4xx/cpu_init.c
new file mode 100644
index 0000000..8a6e545
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/cpu_init.c
@@ -0,0 +1,456 @@
+/*
+ * (C) Copyright 2000-2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <ppc4xx_enet.h>
+#include <asm/processor.h>
+#include <asm/gpio.h>
+#include <ppc4xx.h>
+
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
+#ifndef CONFIG_SYS_PLL_RECONFIG
+#define CONFIG_SYS_PLL_RECONFIG 0
+#endif
+
+void reconfigure_pll(u32 new_cpu_freq)
+{
+#if defined(CONFIG_440EPX)
+ int reset_needed = 0;
+ u32 reg, temp;
+ u32 prbdv0, target_prbdv0, /* CLK_PRIMBD */
+ fwdva, target_fwdva, fwdvb, target_fwdvb, /* CLK_PLLD */
+ fbdv, target_fbdv, lfbdv, target_lfbdv,
+ perdv0, target_perdv0, /* CLK_PERD */
+ spcid0, target_spcid0; /* CLK_SPCID */
+
+ /* Reconfigure clocks if necessary.
+ * See PPC440EPx User's Manual, sections 8.2 and 14 */
+ if (new_cpu_freq == 667) {
+ target_prbdv0 = 2;
+ target_fwdva = 2;
+ target_fwdvb = 4;
+ target_fbdv = 20;
+ target_lfbdv = 1;
+ target_perdv0 = 4;
+ target_spcid0 = 4;
+
+ mfcpr(CPR0_PRIMBD0, reg);
+ temp = (reg & PRBDV_MASK) >> 24;
+ prbdv0 = temp ? temp : 8;
+ if (prbdv0 != target_prbdv0) {
+ reg &= ~PRBDV_MASK;
+ reg |= ((target_prbdv0 == 8 ? 0 : target_prbdv0) << 24);
+ mtcpr(CPR0_PRIMBD0, reg);
+ reset_needed = 1;
+ }
+
+ mfcpr(CPR0_PLLD, reg);
+
+ temp = (reg & PLLD_FWDVA_MASK) >> 16;
+ fwdva = temp ? temp : 16;
+
+ temp = (reg & PLLD_FWDVB_MASK) >> 8;
+ fwdvb = temp ? temp : 8;
+
+ temp = (reg & PLLD_FBDV_MASK) >> 24;
+ fbdv = temp ? temp : 32;
+
+ temp = (reg & PLLD_LFBDV_MASK);
+ lfbdv = temp ? temp : 64;
+
+ if (fwdva != target_fwdva || fbdv != target_fbdv || lfbdv != target_lfbdv) {
+ reg &= ~(PLLD_FWDVA_MASK | PLLD_FWDVB_MASK |
+ PLLD_FBDV_MASK | PLLD_LFBDV_MASK);
+ reg |= ((target_fwdva == 16 ? 0 : target_fwdva) << 16) |
+ ((target_fwdvb == 8 ? 0 : target_fwdvb) << 8) |
+ ((target_fbdv == 32 ? 0 : target_fbdv) << 24) |
+ (target_lfbdv == 64 ? 0 : target_lfbdv);
+ mtcpr(CPR0_PLLD, reg);
+ reset_needed = 1;
+ }
+
+ mfcpr(CPR0_PERD, reg);
+ perdv0 = (reg & CPR0_PERD_PERDV0_MASK) >> 24;
+ if (perdv0 != target_perdv0) {
+ reg &= ~CPR0_PERD_PERDV0_MASK;
+ reg |= (target_perdv0 << 24);
+ mtcpr(CPR0_PERD, reg);
+ reset_needed = 1;
+ }
+
+ mfcpr(CPR0_SPCID, reg);
+ temp = (reg & CPR0_SPCID_SPCIDV0_MASK) >> 24;
+ spcid0 = temp ? temp : 4;
+ if (spcid0 != target_spcid0) {
+ reg &= ~CPR0_SPCID_SPCIDV0_MASK;
+ reg |= ((target_spcid0 == 4 ? 0 : target_spcid0) << 24);
+ mtcpr(CPR0_SPCID, reg);
+ reset_needed = 1;
+ }
+ }
+
+ /* Get current value of FWDVA.*/
+ mfcpr(CPR0_PLLD, reg);
+ temp = (reg & PLLD_FWDVA_MASK) >> 16;
+
+ /*
+ * Check to see if FWDVA has been set to value of 1. if it has we must
+ * modify it.
+ */
+ if (temp == 1) {
+ mfcpr(CPR0_PLLD, reg);
+ /* Get current value of fbdv. */
+ temp = (reg & PLLD_FBDV_MASK) >> 24;
+ fbdv = temp ? temp : 32;
+ /* Get current value of lfbdv. */
+ temp = (reg & PLLD_LFBDV_MASK);
+ lfbdv = temp ? temp : 64;
+ /*
+ * Load register that contains current boot strapping option.
+ */
+ mfcpr(CPR0_ICFG, reg);
+ /* Shift strapping option into low 3 bits.*/
+ reg = (reg >> 28);
+
+ if ((reg == BOOT_STRAP_OPTION_A) || (reg == BOOT_STRAP_OPTION_B) ||
+ (reg == BOOT_STRAP_OPTION_D) || (reg == BOOT_STRAP_OPTION_E)) {
+ /*
+ * Get current value of FWDVA. Assign current FWDVA to
+ * new FWDVB.
+ */
+ mfcpr(CPR0_PLLD, reg);
+ target_fwdvb = (reg & PLLD_FWDVA_MASK) >> 16;
+ fwdvb = target_fwdvb ? target_fwdvb : 8;
+ /*
+ * Get current value of FWDVB. Assign current FWDVB to
+ * new FWDVA.
+ */
+ target_fwdva = (reg & PLLD_FWDVB_MASK) >> 8;
+ fwdva = target_fwdva ? target_fwdva : 16;
+ /*
+ * Update CPR0_PLLD with switched FWDVA and FWDVB.
+ */
+ reg &= ~(PLLD_FWDVA_MASK | PLLD_FWDVB_MASK |
+ PLLD_FBDV_MASK | PLLD_LFBDV_MASK);
+ reg |= ((fwdva == 16 ? 0 : fwdva) << 16) |
+ ((fwdvb == 8 ? 0 : fwdvb) << 8) |
+ ((fbdv == 32 ? 0 : fbdv) << 24) |
+ (lfbdv == 64 ? 0 : lfbdv);
+ mtcpr(CPR0_PLLD, reg);
+ /* Acknowledge that a reset is required. */
+ reset_needed = 1;
+ }
+ }
+
+ if (reset_needed) {
+ /*
+ * Set reload inhibit so configuration will persist across
+ * processor resets
+ */
+ mfcpr(CPR0_ICFG, reg);
+ reg &= ~CPR0_ICFG_RLI_MASK;
+ reg |= 1 << 31;
+ mtcpr(CPR0_ICFG, reg);
+
+ /* Reset processor if configuration changed */
+ __asm__ __volatile__ ("sync; isync");
+ mtspr(SPRN_DBCR0, 0x20000000);
+ }
+#endif
+}
+
+/*
+ * Breath some life into the CPU...
+ *
+ * Reconfigure PLL if necessary,
+ * set up the memory map,
+ * initialize a bunch of registers
+ */
+void
+cpu_init_f (void)
+{
+#if defined(CONFIG_WATCHDOG) || defined(CONFIG_440GX) || defined(CONFIG_460EX)
+ u32 val;
+#endif
+
+ reconfigure_pll(CONFIG_SYS_PLL_RECONFIG);
+
+#if (defined(CONFIG_405EP) || defined (CONFIG_405EX)) && !defined(CONFIG_SYS_4xx_GPIO_TABLE)
+ /*
+ * GPIO0 setup (select GPIO or alternate function)
+ */
+#if defined(CONFIG_SYS_GPIO0_OR)
+ out32(GPIO0_OR, CONFIG_SYS_GPIO0_OR); /* set initial state of output pins */
+#endif
+#if defined(CONFIG_SYS_GPIO0_ODR)
+ out32(GPIO0_ODR, CONFIG_SYS_GPIO0_ODR); /* open-drain select */
+#endif
+ out32(GPIO0_OSRH, CONFIG_SYS_GPIO0_OSRH); /* output select */
+ out32(GPIO0_OSRL, CONFIG_SYS_GPIO0_OSRL);
+ out32(GPIO0_ISR1H, CONFIG_SYS_GPIO0_ISR1H); /* input select */
+ out32(GPIO0_ISR1L, CONFIG_SYS_GPIO0_ISR1L);
+ out32(GPIO0_TSRH, CONFIG_SYS_GPIO0_TSRH); /* three-state select */
+ out32(GPIO0_TSRL, CONFIG_SYS_GPIO0_TSRL);
+#if defined(CONFIG_SYS_GPIO0_ISR2H)
+ out32(GPIO0_ISR2H, CONFIG_SYS_GPIO0_ISR2H);
+ out32(GPIO0_ISR2L, CONFIG_SYS_GPIO0_ISR2L);
+#endif
+#if defined (CONFIG_SYS_GPIO0_TCR)
+ out32(GPIO0_TCR, CONFIG_SYS_GPIO0_TCR); /* enable output driver for outputs */
+#endif
+#endif /* CONFIG_405EP ... && !CONFIG_SYS_4xx_GPIO_TABLE */
+
+#if defined (CONFIG_405EP)
+ /*
+ * Set EMAC noise filter bits
+ */
+ mtdcr(CPC0_EPCTL, CPC0_EPRCSR_E0NFE | CPC0_EPRCSR_E1NFE);
+#endif /* CONFIG_405EP */
+
+#if defined(CONFIG_SYS_4xx_GPIO_TABLE)
+ gpio_set_chip_configuration();
+#endif /* CONFIG_SYS_4xx_GPIO_TABLE */
+
+ /*
+ * External Bus Controller (EBC) Setup
+ */
+#if (defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))
+#if (defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
+ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
+ defined(CONFIG_405EX) || defined(CONFIG_405))
+ /*
+ * Move the next instructions into icache, since these modify the flash
+ * we are running from!
+ */
+ asm volatile(" bl 0f" ::: "lr");
+ asm volatile("0: mflr 3" ::: "r3");
+ asm volatile(" addi 4, 0, 14" ::: "r4");
+ asm volatile(" mtctr 4" ::: "ctr");
+ asm volatile("1: icbt 0, 3");
+ asm volatile(" addi 3, 3, 32" ::: "r3");
+ asm volatile(" bdnz 1b" ::: "ctr", "cr0");
+ asm volatile(" addis 3, 0, 0x0" ::: "r3");
+ asm volatile(" ori 3, 3, 0xA000" ::: "r3");
+ asm volatile(" mtctr 3" ::: "ctr");
+ asm volatile("2: bdnz 2b" ::: "ctr", "cr0");
+#endif
+
+ mtebc(PB0AP, CONFIG_SYS_EBC_PB0AP);
+ mtebc(PB0CR, CONFIG_SYS_EBC_PB0CR);
+#endif
+
+#if (defined(CONFIG_SYS_EBC_PB1AP) && defined(CONFIG_SYS_EBC_PB1CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 1))
+ mtebc(PB1AP, CONFIG_SYS_EBC_PB1AP);
+ mtebc(PB1CR, CONFIG_SYS_EBC_PB1CR);
+#endif
+
+#if (defined(CONFIG_SYS_EBC_PB2AP) && defined(CONFIG_SYS_EBC_PB2CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 2))
+ mtebc(PB2AP, CONFIG_SYS_EBC_PB2AP);
+ mtebc(PB2CR, CONFIG_SYS_EBC_PB2CR);
+#endif
+
+#if (defined(CONFIG_SYS_EBC_PB3AP) && defined(CONFIG_SYS_EBC_PB3CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 3))
+ mtebc(PB3AP, CONFIG_SYS_EBC_PB3AP);
+ mtebc(PB3CR, CONFIG_SYS_EBC_PB3CR);
+#endif
+
+#if (defined(CONFIG_SYS_EBC_PB4AP) && defined(CONFIG_SYS_EBC_PB4CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 4))
+ mtebc(PB4AP, CONFIG_SYS_EBC_PB4AP);
+ mtebc(PB4CR, CONFIG_SYS_EBC_PB4CR);
+#endif
+
+#if (defined(CONFIG_SYS_EBC_PB5AP) && defined(CONFIG_SYS_EBC_PB5CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 5))
+ mtebc(PB5AP, CONFIG_SYS_EBC_PB5AP);
+ mtebc(PB5CR, CONFIG_SYS_EBC_PB5CR);
+#endif
+
+#if (defined(CONFIG_SYS_EBC_PB6AP) && defined(CONFIG_SYS_EBC_PB6CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 6))
+ mtebc(PB6AP, CONFIG_SYS_EBC_PB6AP);
+ mtebc(PB6CR, CONFIG_SYS_EBC_PB6CR);
+#endif
+
+#if (defined(CONFIG_SYS_EBC_PB7AP) && defined(CONFIG_SYS_EBC_PB7CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 7))
+ mtebc(PB7AP, CONFIG_SYS_EBC_PB7AP);
+ mtebc(PB7CR, CONFIG_SYS_EBC_PB7CR);
+#endif
+
+#if defined (CONFIG_SYS_EBC_CFG)
+ mtebc(EBC0_CFG, CONFIG_SYS_EBC_CFG);
+#endif
+
+#if defined(CONFIG_WATCHDOG)
+ val = mfspr(tcr);
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+ val |= 0xb8000000; /* generate system reset after 1.34 seconds */
+#elif defined(CONFIG_440EPX)
+ val |= 0xb0000000; /* generate system reset after 1.34 seconds */
+#else
+ val |= 0xf0000000; /* generate system reset after 2.684 seconds */
+#endif
+#if defined(CONFIG_SYS_4xx_RESET_TYPE)
+ val &= ~0x30000000; /* clear WRC bits */
+ val |= CONFIG_SYS_4xx_RESET_TYPE << 28; /* set board specific WRC type */
+#endif
+ mtspr(tcr, val);
+
+ val = mfspr(tsr);
+ val |= 0x80000000; /* enable watchdog timer */
+ mtspr(tsr, val);
+
+ reset_4xx_watchdog();
+#endif /* CONFIG_WATCHDOG */
+
+#if defined(CONFIG_440GX)
+ /* Take the GX out of compatibility mode
+ * Travis Sawyer, 9 Mar 2004
+ * NOTE: 440gx user manual inconsistency here
+ * Compatibility mode and Ethernet Clock select are not
+ * correct in the manual
+ */
+ mfsdr(SDR0_MFR, val);
+ val &= ~0x10000000;
+ mtsdr(SDR0_MFR,val);
+#endif /* CONFIG_440GX */
+
+#if defined(CONFIG_460EX)
+ /*
+ * Set SDR0_AHB_CFG[A2P_INCR4] (bit 24) and
+ * clear SDR0_AHB_CFG[A2P_PROT2] (bit 25) for a new 460EX errata
+ * regarding concurrent use of AHB USB OTG, USB 2.0 host and SATA
+ */
+ mfsdr(SDR0_AHB_CFG, val);
+ val |= 0x80;
+ val &= ~0x40;
+ mtsdr(SDR0_AHB_CFG, val);
+ mfsdr(SDR0_USB2HOST_CFG, val);
+ val &= ~0xf00;
+ val |= 0x400;
+ mtsdr(SDR0_USB2HOST_CFG, val);
+#endif /* CONFIG_460EX */
+
+#if defined(CONFIG_405EX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+ defined(CONFIG_460SX)
+ /*
+ * Set PLB4 arbiter (Segment 0 and 1) to 4 deep pipeline read
+ */
+ mtdcr(PLB0_ACR, (mfdcr(PLB0_ACR) & ~PLB0_ACR_RDP_MASK) |
+ PLB0_ACR_RDP_4DEEP);
+ mtdcr(PLB1_ACR, (mfdcr(PLB1_ACR) & ~PLB1_ACR_RDP_MASK) |
+ PLB1_ACR_RDP_4DEEP);
+#endif /* CONFIG_440SP/SPE || CONFIG_460EX/GT || CONFIG_405EX */
+}
+
+/*
+ * initialize higher level parts of CPU like time base and timers
+ */
+int cpu_init_r (void)
+{
+#if defined(CONFIG_405GP)
+ uint pvr = get_pvr();
+
+ /*
+ * Set edge conditioning circuitry on PPC405GPr
+ * for compatibility to existing PPC405GP designs.
+ */
+ if ((pvr & 0xfffffff0) == (PVR_405GPR_RB & 0xfffffff0)) {
+ mtdcr(CPC0_ECR, 0x60606000);
+ }
+#endif /* defined(CONFIG_405GP) */
+
+ return 0;
+}
+
+#if defined(CONFIG_PCI) && \
+ (defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440GRX))
+/*
+ * 440EP(x)/GR(x) PCI async/sync clocking restriction:
+ *
+ * In asynchronous PCI mode, the synchronous PCI clock must meet
+ * certain requirements. The following equation describes the
+ * relationship that must be maintained between the asynchronous PCI
+ * clock and synchronous PCI clock. Select an appropriate PCI:PLB
+ * ratio to maintain the relationship:
+ *
+ * AsyncPCIClk - 1MHz <= SyncPCIclock <= (2 * AsyncPCIClk) - 1MHz
+ */
+static int ppc4xx_pci_sync_clock_ok(u32 sync, u32 async)
+{
+ if (((async - 1000000) > sync) || (sync > ((2 * async) - 1000000)))
+ return 0;
+ else
+ return 1;
+}
+
+int ppc4xx_pci_sync_clock_config(u32 async)
+{
+ sys_info_t sys_info;
+ u32 sync;
+ int div;
+ u32 reg;
+ u32 spcid_val[] = {
+ CPR0_SPCID_SPCIDV0_DIV1, CPR0_SPCID_SPCIDV0_DIV2,
+ CPR0_SPCID_SPCIDV0_DIV3, CPR0_SPCID_SPCIDV0_DIV4 };
+
+ get_sys_info(&sys_info);
+ sync = sys_info.freqPCI;
+
+ /*
+ * First check if the equation above is met
+ */
+ if (!ppc4xx_pci_sync_clock_ok(sync, async)) {
+ /*
+ * Reconfigure PCI sync clock to meet the equation.
+ * Start with highest possible PCI sync frequency
+ * (divider 1).
+ */
+ for (div = 1; div <= 4; div++) {
+ sync = sys_info.freqPLB / div;
+ if (ppc4xx_pci_sync_clock_ok(sync, async))
+ break;
+ }
+
+ if (div <= 4) {
+ mtcpr(CPR0_SPCID, spcid_val[div]);
+
+ mfcpr(CPR0_ICFG, reg);
+ reg |= CPR0_ICFG_RLI_MASK;
+ mtcpr(CPR0_ICFG, reg);
+
+ /* do chip reset */
+ mtspr(SPRN_DBCR0, 0x20000000);
+ } else {
+ /* Impossible to configure the PCI sync clock */
+ return -1;
+ }
+ }
+
+ return 0;
+}
+#endif
diff --git a/arch/ppc/cpu/ppc4xx/dcr.S b/arch/ppc/cpu/ppc4xx/dcr.S
new file mode 100644
index 0000000..93465a3
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/dcr.S
@@ -0,0 +1,198 @@
+/*
+ * (C) Copyright 2001
+ * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <config.h>
+
+#if defined(CONFIG_4xx) && defined(CONFIG_CMD_SETGETDCR)
+
+#include <ppc4xx.h>
+
+#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#define _ASMLANGUAGE
+
+/*****************************************************************************
+ *
+ * XXX - DANGER
+ * These routines make use of self modifying code. DO NOT CALL THEM
+ * UNTIL THEY ARE RELOCATED TO RAM. Additionally, I do not
+ * recommend them for use in anything other than an interactive
+ * debugging environment. This is mainly due to performance reasons.
+ *
+ ****************************************************************************/
+
+/*
+ * static void _create_MFDCR(unsigned short dcrn)
+ *
+ * Builds a 'mfdcr' instruction for get_dcr
+ * function.
+ */
+ .section ".text"
+ .align 2
+ .type _create_MFDCR,@function
+_create_MFDCR:
+ /*
+ * Build up a 'mfdcr' instruction formatted as follows:
+ *
+ * OPCD | RT | DCRF | XO | CR |
+ * ---------------|--------------|--------------|----|
+ * 0 5 | 6 10 | 11 20 | 21 30 | 31 |
+ * | | DCRN | | |
+ * 31 | %r3 | (5..9|0..4) | 323 | 0 |
+ *
+ * Where:
+ * OPCD = opcode - 31
+ * RT = destination register - %r3 return register
+ * DCRF = DCRN # with upper and lower halves swapped
+ * XO = extended opcode - 323
+ * CR = CR[CR0] NOT undefined - 0
+ */
+ rlwinm r0, r3, 27, 27, 31 /* OPCD = 31 */
+ rlwinm r3, r3, 5, 22, 26
+ or r3, r3, r0
+ slwi r3, r3, 10
+ oris r3, r3, 0x3e30 /* RT = %r3 */
+ ori r3, r3, 323 /* XO = 323 */
+ slwi r3, r3, 1 /* CR = 0 */
+
+ mflr r4
+ stw r3, 0(r4) /* Store instr in get_dcr() */
+ dcbst r0, r4 /* Make sure val is written out */
+ sync /* Wait for write to complete */
+ icbi r0, r4 /* Make sure old instr is dumped */
+ isync /* Wait for icbi to complete */
+
+ blr
+.Lfe1: .size _create_MFDCR,.Lfe1-_create_MFDCR
+/* end _create_MFDCR() */
+
+/*
+ * static void _create_MTDCR(unsigned short dcrn, unsigned long value)
+ *
+ * Builds a 'mtdcr' instruction for set_dcr
+ * function.
+ */
+ .section ".text"
+ .align 2
+ .type _create_MTDCR,@function
+_create_MTDCR:
+ /*
+ * Build up a 'mtdcr' instruction formatted as follows:
+ *
+ * OPCD | RS | DCRF | XO | CR |
+ * ---------------|--------------|--------------|----|
+ * 0 5 | 6 10 | 11 20 | 21 30 | 31 |
+ * | | DCRN | | |
+ * 31 | %r3 | (5..9|0..4) | 451 | 0 |
+ *
+ * Where:
+ * OPCD = opcode - 31
+ * RS = source register - %r4
+ * DCRF = dest. DCRN # with upper and lower halves swapped
+ * XO = extended opcode - 451
+ * CR = CR[CR0] NOT undefined - 0
+ */
+ rlwinm r0, r3, 27, 27, 31 /* OPCD = 31 */
+ rlwinm r3, r3, 5, 22, 26
+ or r3, r3, r0
+ slwi r3, r3, 10
+ oris r3, r3, 0x3e40 /* RS = %r4 */
+ ori r3, r3, 451 /* XO = 451 */
+ slwi r3, r3, 1 /* CR = 0 */
+
+ mflr r5
+ stw r3, 0(r5) /* Store instr in set_dcr() */
+ dcbst r0, r5 /* Make sure val is written out */
+ sync /* Wait for write to complete */
+ icbi r0, r5 /* Make sure old instr is dumped */
+ isync /* Wait for icbi to complete */
+
+ blr
+.Lfe2: .size _create_MTDCR,.Lfe2-_create_MTDCR
+/* end _create_MTDCR() */
+
+
+/*
+ * unsigned long get_dcr(unsigned short dcrn)
+ *
+ * Return a given DCR's value.
+ */
+ /* */
+ /* XXX - This is self modifying code, hence */
+ /* it is in the data section. */
+ /* */
+ .section ".data"
+ .align 2
+ .globl get_dcr
+ .type get_dcr,@function
+get_dcr:
+ mflr r0 /* Get link register */
+ stwu r1, -32(r1) /* Save back chain and move SP */
+ stw r0, +36(r1) /* Save link register */
+
+ bl _create_MFDCR /* Build following instruction */
+ /* XXX - we build this instuction up on the fly. */
+ .long 0 /* Get DCR's value */
+
+ lwz r0, +36(r1) /* Get saved link register */
+ mtlr r0 /* Restore link register */
+ addi r1, r1, +32 /* Remove frame from stack */
+ blr /* Return to calling function */
+.Lfe3: .size get_dcr,.Lfe3-get_dcr
+/* end get_dcr() */
+
+
+/*
+ * unsigned void set_dcr(unsigned short dcrn, unsigned long value)
+ *
+ * Return a given DCR's value.
+ */
+ /*
+ * XXX - This is self modifying code, hence
+ * it is in the data section.
+ */
+ .section ".data"
+ .align 2
+ .globl set_dcr
+ .type set_dcr,@function
+set_dcr:
+ mflr r0 /* Get link register */
+ stwu r1, -32(r1) /* Save back chain and move SP */
+ stw r0, +36(r1) /* Save link register */
+
+ bl _create_MTDCR /* Build following instruction */
+ /* XXX - we build this instuction up on the fly. */
+ .long 0 /* Set DCR's value */
+
+ lwz r0, +36(r1) /* Get saved link register */
+ mtlr r0 /* Restore link register */
+ addi r1, r1, +32 /* Remove frame from stack */
+ blr /* Return to calling function */
+.Lfe4: .size set_dcr,.Lfe4-set_dcr
+/* end set_dcr() */
+#endif
diff --git a/arch/ppc/cpu/ppc4xx/denali_data_eye.c b/arch/ppc/cpu/ppc4xx/denali_data_eye.c
new file mode 100644
index 0000000..15a9b4f
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/denali_data_eye.c
@@ -0,0 +1,389 @@
+/*
+ * arch/ppc/cpu/ppc4xx/denali_data_eye.c
+ * Extracted from board/amcc/sequoia/sdram.c by Larry Johnson <lrj@acm.org>.
+ *
+ * (C) Copyright 2006
+ * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com
+ * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
+ * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com
+ *
+ * (C) Copyright 2006-2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* define DEBUG for debugging output (obviously ;-)) */
+#if 0
+#define DEBUG
+#endif
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <ppc4xx.h>
+
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+/*-----------------------------------------------------------------------------+
+ * denali_wait_for_dlllock.
+ +----------------------------------------------------------------------------*/
+int denali_wait_for_dlllock(void)
+{
+ u32 val;
+ int wait;
+
+ /* -----------------------------------------------------------+
+ * Wait for the DCC master delay line to finish calibration
+ * ----------------------------------------------------------*/
+ for (wait = 0; wait != 0xffff; ++wait) {
+ mfsdram(DDR0_17, val);
+ if (DDR0_17_DLLLOCKREG_DECODE(val)) {
+ /* dlllockreg bit on */
+ return 0;
+ }
+ }
+ debug("0x%04x: DDR0_17 Value (dlllockreg bit): 0x%08x\n", wait, val);
+ debug("Waiting for dlllockreg bit to raise\n");
+ return -1;
+}
+
+#if defined(CONFIG_DDR_DATA_EYE)
+#define DDR_DCR_BASE 0x10
+#define ddrcfga (DDR_DCR_BASE+0x0) /* DDR configuration address reg */
+#define ddrcfgd (DDR_DCR_BASE+0x1) /* DDR configuration data reg */
+
+/*-----------------------------------------------------------------------------+
+ * wait_for_dram_init_complete.
+ +----------------------------------------------------------------------------*/
+static int wait_for_dram_init_complete(void)
+{
+ unsigned long val;
+ int wait = 0;
+
+ /* --------------------------------------------------------------+
+ * Wait for 'DRAM initialization complete' bit in status register
+ * -------------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_00);
+
+ while (wait != 0xffff) {
+ val = mfdcr(ddrcfgd);
+ if ((val & DDR0_00_INT_STATUS_BIT6) == DDR0_00_INT_STATUS_BIT6)
+ /* 'DRAM initialization complete' bit */
+ return 0;
+ else
+ wait++;
+ }
+ debug("DRAM initialization complete bit in status register did not "
+ "rise\n");
+ return -1;
+}
+
+#define NUM_TRIES 64
+#define NUM_READS 10
+
+/*-----------------------------------------------------------------------------+
+ * denali_core_search_data_eye.
+ +----------------------------------------------------------------------------*/
+void denali_core_search_data_eye(void)
+{
+ int k, j;
+ u32 val;
+ u32 wr_dqs_shift, dqs_out_shift, dll_dqs_delay_X;
+ u32 max_passing_cases = 0, wr_dqs_shift_with_max_passing_cases = 0;
+ u32 passing_cases = 0, dll_dqs_delay_X_sw_val = 0;
+ u32 dll_dqs_delay_X_start_window = 0, dll_dqs_delay_X_end_window = 0;
+ volatile u32 *ram_pointer;
+ u32 test[NUM_TRIES] = {
+ 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+ 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55
+ };
+
+ ram_pointer = (volatile u32 *)(CONFIG_SYS_SDRAM_BASE);
+
+ for (wr_dqs_shift = 64; wr_dqs_shift < 96; wr_dqs_shift++) {
+ /* for (wr_dqs_shift=1; wr_dqs_shift<96; wr_dqs_shift++) { */
+
+ /* -----------------------------------------------------------+
+ * De-assert 'start' parameter.
+ * ----------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_02);
+ val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) |
+ DDR0_02_START_OFF;
+ mtdcr(ddrcfgd, val);
+
+ /* -----------------------------------------------------------+
+ * Set 'wr_dqs_shift'
+ * ----------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_09);
+ val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK) |
+ DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
+ mtdcr(ddrcfgd, val);
+
+ /* -----------------------------------------------------------+
+ * Set 'dqs_out_shift' = wr_dqs_shift + 32
+ * ----------------------------------------------------------*/
+ dqs_out_shift = wr_dqs_shift + 32;
+ mtdcr(ddrcfga, DDR0_22);
+ val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK) |
+ DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
+ mtdcr(ddrcfgd, val);
+
+ passing_cases = 0;
+
+ for (dll_dqs_delay_X = 1; dll_dqs_delay_X < 64;
+ dll_dqs_delay_X++) {
+ /* for (dll_dqs_delay_X=1; dll_dqs_delay_X<128;
+ dll_dqs_delay_X++) { */
+ /* -----------------------------------------------------------+
+ * Set 'dll_dqs_delay_X'.
+ * ----------------------------------------------------------*/
+ /* dll_dqs_delay_0 */
+ mtdcr(ddrcfga, DDR0_17);
+ val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
+ | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+ /* dll_dqs_delay_1 to dll_dqs_delay_4 */
+ mtdcr(ddrcfga, DDR0_18);
+ val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
+ | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+ /* dll_dqs_delay_5 to dll_dqs_delay_8 */
+ mtdcr(ddrcfga, DDR0_19);
+ val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
+ | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+ /* clear any ECC errors */
+ mtdcr(ddrcfga, DDR0_00);
+ mtdcr(ddrcfgd,
+ mfdcr(ddrcfgd) | DDR0_00_INT_ACK_ENCODE(0x3C));
+
+ sync();
+ eieio();
+
+ /* -----------------------------------------------------------+
+ * Assert 'start' parameter.
+ * ----------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_02);
+ val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) |
+ DDR0_02_START_ON;
+ mtdcr(ddrcfgd, val);
+
+ sync();
+ eieio();
+
+ /* -----------------------------------------------------------+
+ * Wait for the DCC master delay line to finish calibration
+ * ----------------------------------------------------------*/
+ if (denali_wait_for_dlllock() != 0) {
+ printf("dll lock did not occur !!!\n");
+ printf("denali_core_search_data_eye!!!\n");
+ printf("wr_dqs_shift = %d - dll_dqs_delay_X = "
+ "%d\n", wr_dqs_shift, dll_dqs_delay_X);
+ hang();
+ }
+ sync();
+ eieio();
+
+ if (wait_for_dram_init_complete() != 0) {
+ printf("dram init complete did not occur!!!\n");
+ printf("denali_core_search_data_eye!!!\n");
+ printf("wr_dqs_shift = %d - dll_dqs_delay_X = "
+ "%d\n", wr_dqs_shift, dll_dqs_delay_X);
+ hang();
+ }
+ udelay(100); /* wait 100us to ensure init is really completed !!! */
+
+ /* write values */
+ for (j = 0; j < NUM_TRIES; j++) {
+ ram_pointer[j] = test[j];
+
+ /* clear any cache at ram location */
+ __asm__("dcbf 0,%0": :"r"(&ram_pointer[j]));
+ }
+
+ /* read values back */
+ for (j = 0; j < NUM_TRIES; j++) {
+ for (k = 0; k < NUM_READS; k++) {
+ /* clear any cache at ram location */
+ __asm__("dcbf 0,%0": :"r"(&ram_pointer
+ [j]));
+
+ if (ram_pointer[j] != test[j])
+ break;
+ }
+
+ /* read error */
+ if (k != NUM_READS)
+ break;
+ }
+
+ /* See if the dll_dqs_delay_X value passed. */
+ mtdcr(ddrcfga, DDR0_00);
+ if (j < NUM_TRIES
+ || (DDR0_00_INT_STATUS_DECODE(mfdcr(ddrcfgd)) &
+ 0x3F)) {
+ /* Failed */
+ passing_cases = 0;
+ /* break; */
+ } else {
+ /* Passed */
+ if (passing_cases == 0)
+ dll_dqs_delay_X_sw_val =
+ dll_dqs_delay_X;
+ passing_cases++;
+ if (passing_cases >= max_passing_cases) {
+ max_passing_cases = passing_cases;
+ wr_dqs_shift_with_max_passing_cases =
+ wr_dqs_shift;
+ dll_dqs_delay_X_start_window =
+ dll_dqs_delay_X_sw_val;
+ dll_dqs_delay_X_end_window =
+ dll_dqs_delay_X;
+ }
+ }
+
+ /* -----------------------------------------------------------+
+ * De-assert 'start' parameter.
+ * ----------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_02);
+ val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) |
+ DDR0_02_START_OFF;
+ mtdcr(ddrcfgd, val);
+ } /* for (dll_dqs_delay_X=0; dll_dqs_delay_X<128; dll_dqs_delay_X++) */
+ } /* for (wr_dqs_shift=0; wr_dqs_shift<96; wr_dqs_shift++) */
+
+ /* -----------------------------------------------------------+
+ * Largest passing window is now detected.
+ * ----------------------------------------------------------*/
+
+ /* Compute dll_dqs_delay_X value */
+ dll_dqs_delay_X = (dll_dqs_delay_X_end_window +
+ dll_dqs_delay_X_start_window) / 2;
+ wr_dqs_shift = wr_dqs_shift_with_max_passing_cases;
+
+ debug("DQS calibration - Window detected:\n");
+ debug("max_passing_cases = %d\n", max_passing_cases);
+ debug("wr_dqs_shift = %d\n", wr_dqs_shift);
+ debug("dll_dqs_delay_X = %d\n", dll_dqs_delay_X);
+ debug("dll_dqs_delay_X window = %d - %d\n",
+ dll_dqs_delay_X_start_window, dll_dqs_delay_X_end_window);
+
+ /* -----------------------------------------------------------+
+ * De-assert 'start' parameter.
+ * ----------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_02);
+ val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
+ mtdcr(ddrcfgd, val);
+
+ /* -----------------------------------------------------------+
+ * Set 'wr_dqs_shift'
+ * ----------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_09);
+ val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
+ | DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
+ mtdcr(ddrcfgd, val);
+ debug("DDR0_09=0x%08lx\n", val);
+
+ /* -----------------------------------------------------------+
+ * Set 'dqs_out_shift' = wr_dqs_shift + 32
+ * ----------------------------------------------------------*/
+ dqs_out_shift = wr_dqs_shift + 32;
+ mtdcr(ddrcfga, DDR0_22);
+ val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
+ | DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
+ mtdcr(ddrcfgd, val);
+ debug("DDR0_22=0x%08lx\n", val);
+
+ /* -----------------------------------------------------------+
+ * Set 'dll_dqs_delay_X'.
+ * ----------------------------------------------------------*/
+ /* dll_dqs_delay_0 */
+ mtdcr(ddrcfga, DDR0_17);
+ val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
+ | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+ debug("DDR0_17=0x%08lx\n", val);
+
+ /* dll_dqs_delay_1 to dll_dqs_delay_4 */
+ mtdcr(ddrcfga, DDR0_18);
+ val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
+ | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
+ | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+ debug("DDR0_18=0x%08lx\n", val);
+
+ /* dll_dqs_delay_5 to dll_dqs_delay_8 */
+ mtdcr(ddrcfga, DDR0_19);
+ val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
+ | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
+ | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
+ mtdcr(ddrcfgd, val);
+ debug("DDR0_19=0x%08lx\n", val);
+
+ /* -----------------------------------------------------------+
+ * Assert 'start' parameter.
+ * ----------------------------------------------------------*/
+ mtdcr(ddrcfga, DDR0_02);
+ val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
+ mtdcr(ddrcfgd, val);
+
+ sync();
+ eieio();
+
+ /* -----------------------------------------------------------+
+ * Wait for the DCC master delay line to finish calibration
+ * ----------------------------------------------------------*/
+ if (denali_wait_for_dlllock() != 0) {
+ printf("dll lock did not occur !!!\n");
+ hang();
+ }
+ sync();
+ eieio();
+
+ if (wait_for_dram_init_complete() != 0) {
+ printf("dram init complete did not occur !!!\n");
+ hang();
+ }
+ udelay(100); /* wait 100us to ensure init is really completed !!! */
+}
+#endif /* defined(CONFIG_DDR_DATA_EYE) */
+#endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */
diff --git a/arch/ppc/cpu/ppc4xx/denali_spd_ddr2.c b/arch/ppc/cpu/ppc4xx/denali_spd_ddr2.c
new file mode 100644
index 0000000..72f76cd
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/denali_spd_ddr2.c
@@ -0,0 +1,1256 @@
+/*
+ * arch/ppc/cpu/ppc4xx/denali_spd_ddr2.c
+ * This SPD SDRAM detection code supports AMCC PPC44x CPUs with a Denali-core
+ * DDR2 controller, specifically the 440EPx/GRx.
+ *
+ * (C) Copyright 2007-2008
+ * Larry Johnson, lrj@acm.org.
+ *
+ * Based primarily on arch/ppc/cpu/ppc4xx/4xx_spd_ddr2.c, which is...
+ *
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * COPYRIGHT AMCC CORPORATION 2004
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/* define DEBUG for debugging output (obviously ;-)) */
+#if 0
+#define DEBUG
+#endif
+
+#include <common.h>
+#include <command.h>
+#include <ppc4xx.h>
+#include <i2c.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/cache.h>
+
+#if defined(CONFIG_SPD_EEPROM) && \
+ (defined(CONFIG_440EPX) || defined(CONFIG_440GRX))
+
+/*-----------------------------------------------------------------------------+
+ * Defines
+ *-----------------------------------------------------------------------------*/
+#ifndef TRUE
+#define TRUE 1
+#endif
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#define MAXDIMMS 2
+#define MAXRANKS 2
+
+#define ONE_BILLION 1000000000
+
+#define MULDIV64(m1, m2, d) (u32)(((u64)(m1) * (u64)(m2)) / (u64)(d))
+
+#define DLL_DQS_DELAY 0x19
+#define DLL_DQS_BYPASS 0x0B
+#define DQS_OUT_SHIFT 0x7F
+
+/*
+ * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
+ * region. Right now the cache should still be disabled in U-Boot because of the
+ * EMAC driver, that need it's buffer descriptor to be located in non cached
+ * memory.
+ *
+ * If at some time this restriction doesn't apply anymore, just define
+ * CONFIG_4xx_DCACHE in the board config file and this code should setup
+ * everything correctly.
+ */
+#if defined(CONFIG_4xx_DCACHE)
+#define MY_TLB_WORD2_I_ENABLE 0 /* enable caching on SDRAM */
+#else
+#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */
+#endif
+
+/*-----------------------------------------------------------------------------+
+ * Prototypes
+ *-----------------------------------------------------------------------------*/
+extern int denali_wait_for_dlllock(void);
+extern void denali_core_search_data_eye(void);
+extern void dcbz_area(u32 start_address, u32 num_bytes);
+
+/*
+ * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed
+ */
+void __spd_ddr_init_hang(void)
+{
+ hang();
+}
+void spd_ddr_init_hang(void)
+ __attribute__ ((weak, alias("__spd_ddr_init_hang")));
+
+#if defined(DEBUG)
+static void print_mcsr(void)
+{
+ printf("MCSR = 0x%08X\n", mfspr(SPRN_MCSR));
+}
+
+static void denali_sdram_register_dump(void)
+{
+ unsigned int sdram_data;
+
+ printf("\n Register Dump:\n");
+ mfsdram(DDR0_00, sdram_data);
+ printf(" DDR0_00 = 0x%08X", sdram_data);
+ mfsdram(DDR0_01, sdram_data);
+ printf(" DDR0_01 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_02, sdram_data);
+ printf(" DDR0_02 = 0x%08X", sdram_data);
+ mfsdram(DDR0_03, sdram_data);
+ printf(" DDR0_03 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_04, sdram_data);
+ printf(" DDR0_04 = 0x%08X", sdram_data);
+ mfsdram(DDR0_05, sdram_data);
+ printf(" DDR0_05 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_06, sdram_data);
+ printf(" DDR0_06 = 0x%08X", sdram_data);
+ mfsdram(DDR0_07, sdram_data);
+ printf(" DDR0_07 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_08, sdram_data);
+ printf(" DDR0_08 = 0x%08X", sdram_data);
+ mfsdram(DDR0_09, sdram_data);
+ printf(" DDR0_09 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_10, sdram_data);
+ printf(" DDR0_10 = 0x%08X", sdram_data);
+ mfsdram(DDR0_11, sdram_data);
+ printf(" DDR0_11 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_12, sdram_data);
+ printf(" DDR0_12 = 0x%08X", sdram_data);
+ mfsdram(DDR0_14, sdram_data);
+ printf(" DDR0_14 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_17, sdram_data);
+ printf(" DDR0_17 = 0x%08X", sdram_data);
+ mfsdram(DDR0_18, sdram_data);
+ printf(" DDR0_18 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_19, sdram_data);
+ printf(" DDR0_19 = 0x%08X", sdram_data);
+ mfsdram(DDR0_20, sdram_data);
+ printf(" DDR0_20 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_21, sdram_data);
+ printf(" DDR0_21 = 0x%08X", sdram_data);
+ mfsdram(DDR0_22, sdram_data);
+ printf(" DDR0_22 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_23, sdram_data);
+ printf(" DDR0_23 = 0x%08X", sdram_data);
+ mfsdram(DDR0_24, sdram_data);
+ printf(" DDR0_24 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_25, sdram_data);
+ printf(" DDR0_25 = 0x%08X", sdram_data);
+ mfsdram(DDR0_26, sdram_data);
+ printf(" DDR0_26 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_27, sdram_data);
+ printf(" DDR0_27 = 0x%08X", sdram_data);
+ mfsdram(DDR0_28, sdram_data);
+ printf(" DDR0_28 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_31, sdram_data);
+ printf(" DDR0_31 = 0x%08X", sdram_data);
+ mfsdram(DDR0_32, sdram_data);
+ printf(" DDR0_32 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_33, sdram_data);
+ printf(" DDR0_33 = 0x%08X", sdram_data);
+ mfsdram(DDR0_34, sdram_data);
+ printf(" DDR0_34 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_35, sdram_data);
+ printf(" DDR0_35 = 0x%08X", sdram_data);
+ mfsdram(DDR0_36, sdram_data);
+ printf(" DDR0_36 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_37, sdram_data);
+ printf(" DDR0_37 = 0x%08X", sdram_data);
+ mfsdram(DDR0_38, sdram_data);
+ printf(" DDR0_38 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_39, sdram_data);
+ printf(" DDR0_39 = 0x%08X", sdram_data);
+ mfsdram(DDR0_40, sdram_data);
+ printf(" DDR0_40 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_41, sdram_data);
+ printf(" DDR0_41 = 0x%08X", sdram_data);
+ mfsdram(DDR0_42, sdram_data);
+ printf(" DDR0_42 = 0x%08X\n", sdram_data);
+ mfsdram(DDR0_43, sdram_data);
+ printf(" DDR0_43 = 0x%08X", sdram_data);
+ mfsdram(DDR0_44, sdram_data);
+ printf(" DDR0_44 = 0x%08X\n", sdram_data);
+}
+#else
+static inline void denali_sdram_register_dump(void)
+{
+}
+
+inline static void print_mcsr(void)
+{
+}
+#endif /* defined(DEBUG) */
+
+static int is_ecc_enabled(void)
+{
+ u32 val;
+
+ mfsdram(DDR0_22, val);
+ return 0x3 == DDR0_22_CTRL_RAW_DECODE(val);
+}
+
+static unsigned char spd_read(u8 chip, unsigned int addr)
+{
+ u8 data[2];
+
+ if (0 != i2c_probe(chip) || 0 != i2c_read(chip, addr, 1, data, 1)) {
+ debug("spd_read(0x%02X, 0x%02X) failed\n", chip, addr);
+ return 0;
+ }
+ debug("spd_read(0x%02X, 0x%02X) returned 0x%02X\n",
+ chip, addr, data[0]);
+ return data[0];
+}
+
+static unsigned long get_tcyc(unsigned char reg)
+{
+ /*
+ * Byte 9, et al: Cycle time for CAS Latency=X, is split into two
+ * nibbles: the higher order nibble (bits 4-7) designates the cycle time
+ * to a granularity of 1ns; the value presented by the lower order
+ * nibble (bits 0-3) has a granularity of .1ns and is added to the value
+ * designated by the higher nibble. In addition, four lines of the lower
+ * order nibble are assigned to support +.25, +.33, +.66, and +.75.
+ */
+
+ unsigned char subfield_b = reg & 0x0F;
+
+ switch (subfield_b & 0x0F) {
+ case 0x0:
+ case 0x1:
+ case 0x2:
+ case 0x3:
+ case 0x4:
+ case 0x5:
+ case 0x6:
+ case 0x7:
+ case 0x8:
+ case 0x9:
+ return 1000 * (reg >> 4) + 100 * subfield_b;
+ case 0xA:
+ return 1000 * (reg >> 4) + 250;
+ case 0xB:
+ return 1000 * (reg >> 4) + 333;
+ case 0xC:
+ return 1000 * (reg >> 4) + 667;
+ case 0xD:
+ return 1000 * (reg >> 4) + 750;
+ }
+ return 0;
+}
+
+/*------------------------------------------------------------------
+ * Find the installed DIMMs, make sure that the are DDR2, and fill
+ * in the dimm_ranks array. Then dimm_ranks[dimm_num] > 0 iff the
+ * DIMM and dimm_num is present.
+ * Note: Because there are only two chip-select lines, it is assumed
+ * that a board with a single socket can support two ranks on that
+ * socket, while a board with two sockets can support only one rank
+ * on each socket.
+ *-----------------------------------------------------------------*/
+static void get_spd_info(unsigned long dimm_ranks[],
+ unsigned long *ranks,
+ unsigned char const iic0_dimm_addr[],
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long dimm_found = FALSE;
+ unsigned long const max_ranks_per_dimm = (1 == num_dimm_banks) ? 2 : 1;
+ unsigned char num_of_bytes;
+ unsigned char total_size;
+
+ *ranks = 0;
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ num_of_bytes = 0;
+ total_size = 0;
+
+ num_of_bytes = spd_read(iic0_dimm_addr[dimm_num], 0);
+ total_size = spd_read(iic0_dimm_addr[dimm_num], 1);
+ if ((num_of_bytes != 0) && (total_size != 0)) {
+ unsigned char const dimm_type =
+ spd_read(iic0_dimm_addr[dimm_num], 2);
+
+ unsigned long ranks_on_dimm =
+ (spd_read(iic0_dimm_addr[dimm_num], 5) & 0x07) + 1;
+
+ if (8 != dimm_type) {
+ switch (dimm_type) {
+ case 1:
+ printf("ERROR: Standard Fast Page Mode "
+ "DRAM DIMM");
+ break;
+ case 2:
+ printf("ERROR: EDO DIMM");
+ break;
+ case 3:
+ printf("ERROR: Pipelined Nibble DIMM");
+ break;
+ case 4:
+ printf("ERROR: SDRAM DIMM");
+ break;
+ case 5:
+ printf("ERROR: Multiplexed ROM DIMM");
+ break;
+ case 6:
+ printf("ERROR: SGRAM DIMM");
+ break;
+ case 7:
+ printf("ERROR: DDR1 DIMM");
+ break;
+ default:
+ printf("ERROR: Unknown DIMM (type %d)",
+ (unsigned int)dimm_type);
+ break;
+ }
+ printf(" detected in slot %lu.\n", dimm_num);
+ printf("Only DDR2 SDRAM DIMMs are supported."
+ "\n");
+ printf("Replace the module with a DDR2 DIMM."
+ "\n\n");
+ spd_ddr_init_hang();
+ }
+ dimm_found = TRUE;
+ debug("DIMM slot %lu: populated with %lu-rank DDR2 DIMM"
+ "\n", dimm_num, ranks_on_dimm);
+ if (ranks_on_dimm > max_ranks_per_dimm) {
+ printf("WARNING: DRAM DIMM in slot %lu has %lu "
+ "ranks.\n", dimm_num, ranks_on_dimm);
+ if (1 == max_ranks_per_dimm) {
+ printf("Only one rank will be used.\n");
+ } else {
+ printf
+ ("Only two ranks will be used.\n");
+ }
+ ranks_on_dimm = max_ranks_per_dimm;
+ }
+ dimm_ranks[dimm_num] = ranks_on_dimm;
+ *ranks += ranks_on_dimm;
+ } else {
+ dimm_ranks[dimm_num] = 0;
+ debug("DIMM slot %lu: Not populated\n", dimm_num);
+ }
+ }
+ if (dimm_found == FALSE) {
+ printf("ERROR: No memory installed.\n");
+ printf("Install at least one DDR2 DIMM.\n\n");
+ spd_ddr_init_hang();
+ }
+ debug("Total number of ranks = %d\n", *ranks);
+}
+
+/*------------------------------------------------------------------
+ * For the memory DIMMs installed, this routine verifies that
+ * frequency previously calculated is supported.
+ *-----------------------------------------------------------------*/
+static void check_frequency(unsigned long *dimm_ranks,
+ unsigned char const iic0_dimm_addr[],
+ unsigned long num_dimm_banks,
+ unsigned long sdram_freq)
+{
+ unsigned long dimm_num;
+ unsigned long cycle_time;
+ unsigned long calc_cycle_time;
+
+ /*
+ * calc_cycle_time is calculated from DDR frequency set by board/chip
+ * and is expressed in picoseconds to match the way DIMM cycle time is
+ * calculated below.
+ */
+ calc_cycle_time = MULDIV64(ONE_BILLION, 1000, sdram_freq);
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_ranks[dimm_num]) {
+ cycle_time =
+ get_tcyc(spd_read(iic0_dimm_addr[dimm_num], 9));
+ debug("cycle_time=%d ps\n", cycle_time);
+
+ if (cycle_time > (calc_cycle_time + 10)) {
+ /*
+ * the provided sdram cycle_time is too small
+ * for the available DIMM cycle_time. The
+ * additionnal 10ps is here to accept a small
+ * incertainty.
+ */
+ printf
+ ("ERROR: DRAM DIMM detected with cycle_time %d ps in "
+ "slot %d \n while calculated cycle time is %d ps.\n",
+ (unsigned int)cycle_time,
+ (unsigned int)dimm_num,
+ (unsigned int)calc_cycle_time);
+ printf
+ ("Replace the DIMM, or change DDR frequency via "
+ "strapping bits.\n\n");
+ spd_ddr_init_hang();
+ }
+ }
+ }
+}
+
+/*------------------------------------------------------------------
+ * This routine gets size information for the installed memory
+ * DIMMs.
+ *-----------------------------------------------------------------*/
+static void get_dimm_size(unsigned long dimm_ranks[],
+ unsigned char const iic0_dimm_addr[],
+ unsigned long num_dimm_banks,
+ unsigned long *const rows,
+ unsigned long *const banks,
+ unsigned long *const cols, unsigned long *const width)
+{
+ unsigned long dimm_num;
+
+ *rows = 0;
+ *banks = 0;
+ *cols = 0;
+ *width = 0;
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_ranks[dimm_num]) {
+ unsigned long t;
+
+ /* Rows */
+ t = spd_read(iic0_dimm_addr[dimm_num], 3);
+ if (0 == *rows) {
+ *rows = t;
+ } else if (t != *rows) {
+ printf("ERROR: DRAM DIMM modules do not all "
+ "have the same number of rows.\n\n");
+ spd_ddr_init_hang();
+ }
+ /* Banks */
+ t = spd_read(iic0_dimm_addr[dimm_num], 17);
+ if (0 == *banks) {
+ *banks = t;
+ } else if (t != *banks) {
+ printf("ERROR: DRAM DIMM modules do not all "
+ "have the same number of banks.\n\n");
+ spd_ddr_init_hang();
+ }
+ /* Columns */
+ t = spd_read(iic0_dimm_addr[dimm_num], 4);
+ if (0 == *cols) {
+ *cols = t;
+ } else if (t != *cols) {
+ printf("ERROR: DRAM DIMM modules do not all "
+ "have the same number of columns.\n\n");
+ spd_ddr_init_hang();
+ }
+ /* Data width */
+ t = spd_read(iic0_dimm_addr[dimm_num], 6);
+ if (0 == *width) {
+ *width = t;
+ } else if (t != *width) {
+ printf("ERROR: DRAM DIMM modules do not all "
+ "have the same data width.\n\n");
+ spd_ddr_init_hang();
+ }
+ }
+ }
+ debug("Number of rows = %d\n", *rows);
+ debug("Number of columns = %d\n", *cols);
+ debug("Number of banks = %d\n", *banks);
+ debug("Data width = %d\n", *width);
+ if (*rows > 14) {
+ printf("ERROR: DRAM DIMM modules have %lu address rows.\n",
+ *rows);
+ printf("Only modules with 14 or fewer rows are supported.\n\n");
+ spd_ddr_init_hang();
+ }
+ if (4 != *banks && 8 != *banks) {
+ printf("ERROR: DRAM DIMM modules have %lu banks.\n", *banks);
+ printf("Only modules with 4 or 8 banks are supported.\n\n");
+ spd_ddr_init_hang();
+ }
+ if (*cols > 12) {
+ printf("ERROR: DRAM DIMM modules have %lu address columns.\n",
+ *cols);
+ printf("Only modules with 12 or fewer columns are "
+ "supported.\n\n");
+ spd_ddr_init_hang();
+ }
+ if (32 != *width && 40 != *width && 64 != *width && 72 != *width) {
+ printf("ERROR: DRAM DIMM modules have a width of %lu bit.\n",
+ *width);
+ printf("Only modules with widths of 32, 40, 64, and 72 bits "
+ "are supported.\n\n");
+ spd_ddr_init_hang();
+ }
+}
+
+/*------------------------------------------------------------------
+ * Only 1.8V modules are supported. This routine verifies this.
+ *-----------------------------------------------------------------*/
+static void check_voltage_type(unsigned long dimm_ranks[],
+ unsigned char const iic0_dimm_addr[],
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long voltage_type;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_ranks[dimm_num]) {
+ voltage_type = spd_read(iic0_dimm_addr[dimm_num], 8);
+ if (0x05 != voltage_type) { /* 1.8V for DDR2 */
+ printf("ERROR: Slot %lu provides 1.8V for DDR2 "
+ "DIMMs.\n", dimm_num);
+ switch (voltage_type) {
+ case 0x00:
+ printf("This DIMM is 5.0 Volt/TTL.\n");
+ break;
+ case 0x01:
+ printf("This DIMM is LVTTL.\n");
+ break;
+ case 0x02:
+ printf("This DIMM is 1.5 Volt.\n");
+ break;
+ case 0x03:
+ printf("This DIMM is 3.3 Volt/TTL.\n");
+ break;
+ case 0x04:
+ printf("This DIMM is 2.5 Volt.\n");
+ break;
+ default:
+ printf("This DIMM is an unknown "
+ "voltage.\n");
+ break;
+ }
+ printf("Replace it with a 1.8V DDR2 DIMM.\n\n");
+ spd_ddr_init_hang();
+ }
+ }
+ }
+}
+
+static void program_ddr0_03(unsigned long dimm_ranks[],
+ unsigned char const iic0_dimm_addr[],
+ unsigned long num_dimm_banks,
+ unsigned long sdram_freq,
+ unsigned long rows, unsigned long *cas_latency)
+{
+ unsigned long dimm_num;
+ unsigned long cas_index;
+ unsigned long cycle_2_0_clk;
+ unsigned long cycle_3_0_clk;
+ unsigned long cycle_4_0_clk;
+ unsigned long cycle_5_0_clk;
+ unsigned long max_2_0_tcyc_ps = 100;
+ unsigned long max_3_0_tcyc_ps = 100;
+ unsigned long max_4_0_tcyc_ps = 100;
+ unsigned long max_5_0_tcyc_ps = 100;
+ unsigned char cas_available = 0x3C; /* value for DDR2 */
+ u32 ddr0_03 = DDR0_03_BSTLEN_ENCODE(0x2) | DDR0_03_INITAREF_ENCODE(0x2);
+ unsigned int const tcyc_addr[3] = { 9, 23, 25 };
+
+ /*------------------------------------------------------------------
+ * Get the board configuration info.
+ *-----------------------------------------------------------------*/
+ debug("sdram_freq = %d\n", sdram_freq);
+
+ /*------------------------------------------------------------------
+ * Handle the timing. We need to find the worst case timing of all
+ * the dimm modules installed.
+ *-----------------------------------------------------------------*/
+ /* loop through all the DIMM slots on the board */
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ /* If a dimm is installed in a particular slot ... */
+ if (dimm_ranks[dimm_num]) {
+ unsigned char const cas_bit =
+ spd_read(iic0_dimm_addr[dimm_num], 18);
+ unsigned char cas_mask;
+
+ cas_available &= cas_bit;
+ for (cas_mask = 0x80; cas_mask; cas_mask >>= 1) {
+ if (cas_bit & cas_mask)
+ break;
+ }
+ debug("cas_bit (SPD byte 18) = %02X, cas_mask = %02X\n",
+ cas_bit, cas_mask);
+
+ for (cas_index = 0; cas_index < 3;
+ cas_mask >>= 1, cas_index++) {
+ unsigned long cycle_time_ps;
+
+ if (!(cas_available & cas_mask)) {
+ continue;
+ }
+ cycle_time_ps =
+ get_tcyc(spd_read(iic0_dimm_addr[dimm_num],
+ tcyc_addr[cas_index]));
+
+ debug("cas_index = %d: cycle_time_ps = %d\n",
+ cas_index, cycle_time_ps);
+ /*
+ * DDR2 devices use the following bitmask for CAS latency:
+ * Bit 7 6 5 4 3 2 1 0
+ * TBD 6.0 5.0 4.0 3.0 2.0 TBD TBD
+ */
+ switch (cas_mask) {
+ case 0x20:
+ max_5_0_tcyc_ps =
+ max(max_5_0_tcyc_ps, cycle_time_ps);
+ break;
+ case 0x10:
+ max_4_0_tcyc_ps =
+ max(max_4_0_tcyc_ps, cycle_time_ps);
+ break;
+ case 0x08:
+ max_3_0_tcyc_ps =
+ max(max_3_0_tcyc_ps, cycle_time_ps);
+ break;
+ case 0x04:
+ max_2_0_tcyc_ps =
+ max(max_2_0_tcyc_ps, cycle_time_ps);
+ break;
+ }
+ }
+ }
+ }
+ debug("cas_available (bit map) = 0x%02X\n", cas_available);
+
+ /*------------------------------------------------------------------
+ * Set the SDRAM mode, SDRAM_MMODE
+ *-----------------------------------------------------------------*/
+
+ /* add 10 here because of rounding problems */
+ cycle_2_0_clk = MULDIV64(ONE_BILLION, 1000, max_2_0_tcyc_ps) + 10;
+ cycle_3_0_clk = MULDIV64(ONE_BILLION, 1000, max_3_0_tcyc_ps) + 10;
+ cycle_4_0_clk = MULDIV64(ONE_BILLION, 1000, max_4_0_tcyc_ps) + 10;
+ cycle_5_0_clk = MULDIV64(ONE_BILLION, 1000, max_5_0_tcyc_ps) + 10;
+ debug("cycle_2_0_clk = %d\n", cycle_2_0_clk);
+ debug("cycle_3_0_clk = %d\n", cycle_3_0_clk);
+ debug("cycle_4_0_clk = %d\n", cycle_4_0_clk);
+ debug("cycle_5_0_clk = %d\n", cycle_5_0_clk);
+
+ if ((cas_available & 0x04) && (sdram_freq <= cycle_2_0_clk)) {
+ *cas_latency = 2;
+ ddr0_03 |= DDR0_03_CASLAT_ENCODE(0x2) |
+ DDR0_03_CASLAT_LIN_ENCODE(0x4);
+ } else if ((cas_available & 0x08) && (sdram_freq <= cycle_3_0_clk)) {
+ *cas_latency = 3;
+ ddr0_03 |= DDR0_03_CASLAT_ENCODE(0x3) |
+ DDR0_03_CASLAT_LIN_ENCODE(0x6);
+ } else if ((cas_available & 0x10) && (sdram_freq <= cycle_4_0_clk)) {
+ *cas_latency = 4;
+ ddr0_03 |= DDR0_03_CASLAT_ENCODE(0x4) |
+ DDR0_03_CASLAT_LIN_ENCODE(0x8);
+ } else if ((cas_available & 0x20) && (sdram_freq <= cycle_5_0_clk)) {
+ *cas_latency = 5;
+ ddr0_03 |= DDR0_03_CASLAT_ENCODE(0x5) |
+ DDR0_03_CASLAT_LIN_ENCODE(0xA);
+ } else {
+ printf("ERROR: Cannot find a supported CAS latency with the "
+ "installed DIMMs.\n");
+ printf("Only DDR2 DIMMs with CAS latencies of 2.0, 3.0, 4.0, "
+ "and 5.0 are supported.\n");
+ printf("Make sure the PLB speed is within the supported range "
+ "of the DIMMs.\n");
+ printf("sdram_freq=%ld cycle2=%ld cycle3=%ld cycle4=%ld "
+ "cycle5=%ld\n\n", sdram_freq, cycle_2_0_clk,
+ cycle_3_0_clk, cycle_4_0_clk, cycle_5_0_clk);
+ spd_ddr_init_hang();
+ }
+ debug("CAS latency = %d\n", *cas_latency);
+ mtsdram(DDR0_03, ddr0_03);
+}
+
+static void program_ddr0_04(unsigned long dimm_ranks[],
+ unsigned char const iic0_dimm_addr[],
+ unsigned long num_dimm_banks,
+ unsigned long sdram_freq)
+{
+ unsigned long dimm_num;
+ unsigned long t_rc_ps = 0;
+ unsigned long t_rrd_ps = 0;
+ unsigned long t_rtp_ps = 0;
+ unsigned long t_rc_clk;
+ unsigned long t_rrd_clk;
+ unsigned long t_rtp_clk;
+
+ /*------------------------------------------------------------------
+ * Handle the timing. We need to find the worst case timing of all
+ * the dimm modules installed.
+ *-----------------------------------------------------------------*/
+ /* loop through all the DIMM slots on the board */
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ /* If a dimm is installed in a particular slot ... */
+ if (dimm_ranks[dimm_num]) {
+ unsigned long ps;
+
+ /* tRC */
+ ps = 1000 * spd_read(iic0_dimm_addr[dimm_num], 41);
+ switch (spd_read(iic0_dimm_addr[dimm_num], 40) >> 4) {
+ case 0x1:
+ ps += 250;
+ break;
+ case 0x2:
+ ps += 333;
+ break;
+ case 0x3:
+ ps += 500;
+ break;
+ case 0x4:
+ ps += 667;
+ break;
+ case 0x5:
+ ps += 750;
+ break;
+ }
+ t_rc_ps = max(t_rc_ps, ps);
+ /* tRRD */
+ ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 28);
+ t_rrd_ps = max(t_rrd_ps, ps);
+ /* tRTP */
+ ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 38);
+ t_rtp_ps = max(t_rtp_ps, ps);
+ }
+ }
+ debug("t_rc_ps = %d\n", t_rc_ps);
+ t_rc_clk = (MULDIV64(sdram_freq, t_rc_ps, ONE_BILLION) + 999) / 1000;
+ debug("t_rrd_ps = %d\n", t_rrd_ps);
+ t_rrd_clk = (MULDIV64(sdram_freq, t_rrd_ps, ONE_BILLION) + 999) / 1000;
+ debug("t_rtp_ps = %d\n", t_rtp_ps);
+ t_rtp_clk = (MULDIV64(sdram_freq, t_rtp_ps, ONE_BILLION) + 999) / 1000;
+ mtsdram(DDR0_04, DDR0_04_TRC_ENCODE(t_rc_clk) |
+ DDR0_04_TRRD_ENCODE(t_rrd_clk) |
+ DDR0_04_TRTP_ENCODE(t_rtp_clk));
+}
+
+static void program_ddr0_05(unsigned long dimm_ranks[],
+ unsigned char const iic0_dimm_addr[],
+ unsigned long num_dimm_banks,
+ unsigned long sdram_freq)
+{
+ unsigned long dimm_num;
+ unsigned long t_rp_ps = 0;
+ unsigned long t_ras_ps = 0;
+ unsigned long t_rp_clk;
+ unsigned long t_ras_clk;
+ u32 ddr0_05 = DDR0_05_TMRD_ENCODE(0x2) | DDR0_05_TEMRS_ENCODE(0x2);
+
+ /*------------------------------------------------------------------
+ * Handle the timing. We need to find the worst case timing of all
+ * the dimm modules installed.
+ *-----------------------------------------------------------------*/
+ /* loop through all the DIMM slots on the board */
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ /* If a dimm is installed in a particular slot ... */
+ if (dimm_ranks[dimm_num]) {
+ unsigned long ps;
+
+ /* tRP */
+ ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 27);
+ t_rp_ps = max(t_rp_ps, ps);
+ /* tRAS */
+ ps = 1000 * spd_read(iic0_dimm_addr[dimm_num], 30);
+ t_ras_ps = max(t_ras_ps, ps);
+ }
+ }
+ debug("t_rp_ps = %d\n", t_rp_ps);
+ t_rp_clk = (MULDIV64(sdram_freq, t_rp_ps, ONE_BILLION) + 999) / 1000;
+ debug("t_ras_ps = %d\n", t_ras_ps);
+ t_ras_clk = (MULDIV64(sdram_freq, t_ras_ps, ONE_BILLION) + 999) / 1000;
+ mtsdram(DDR0_05, ddr0_05 | DDR0_05_TRP_ENCODE(t_rp_clk) |
+ DDR0_05_TRAS_MIN_ENCODE(t_ras_clk));
+}
+
+static void program_ddr0_06(unsigned long dimm_ranks[],
+ unsigned char const iic0_dimm_addr[],
+ unsigned long num_dimm_banks,
+ unsigned long sdram_freq)
+{
+ unsigned long dimm_num;
+ unsigned char spd_40;
+ unsigned long t_wtr_ps = 0;
+ unsigned long t_rfc_ps = 0;
+ unsigned long t_wtr_clk;
+ unsigned long t_rfc_clk;
+ u32 ddr0_06 =
+ DDR0_06_WRITEINTERP_ENCODE(0x1) | DDR0_06_TDLL_ENCODE(200);
+
+ /*------------------------------------------------------------------
+ * Handle the timing. We need to find the worst case timing of all
+ * the dimm modules installed.
+ *-----------------------------------------------------------------*/
+ /* loop through all the DIMM slots on the board */
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ /* If a dimm is installed in a particular slot ... */
+ if (dimm_ranks[dimm_num]) {
+ unsigned long ps;
+
+ /* tWTR */
+ ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 37);
+ t_wtr_ps = max(t_wtr_ps, ps);
+ /* tRFC */
+ ps = 1000 * spd_read(iic0_dimm_addr[dimm_num], 42);
+ spd_40 = spd_read(iic0_dimm_addr[dimm_num], 40);
+ ps += 256000 * (spd_40 & 0x01);
+ switch ((spd_40 & 0x0E) >> 1) {
+ case 0x1:
+ ps += 250;
+ break;
+ case 0x2:
+ ps += 333;
+ break;
+ case 0x3:
+ ps += 500;
+ break;
+ case 0x4:
+ ps += 667;
+ break;
+ case 0x5:
+ ps += 750;
+ break;
+ }
+ t_rfc_ps = max(t_rfc_ps, ps);
+ }
+ }
+ debug("t_wtr_ps = %d\n", t_wtr_ps);
+ t_wtr_clk = (MULDIV64(sdram_freq, t_wtr_ps, ONE_BILLION) + 999) / 1000;
+ debug("t_rfc_ps = %d\n", t_rfc_ps);
+ t_rfc_clk = (MULDIV64(sdram_freq, t_rfc_ps, ONE_BILLION) + 999) / 1000;
+ mtsdram(DDR0_06, ddr0_06 | DDR0_06_TWTR_ENCODE(t_wtr_clk) |
+ DDR0_06_TRFC_ENCODE(t_rfc_clk));
+}
+
+static void program_ddr0_10(unsigned long dimm_ranks[], unsigned long ranks)
+{
+ unsigned long csmap;
+
+ if (2 == ranks) {
+ /* Both chip selects in use */
+ csmap = 0x03;
+ } else {
+ /* One chip select in use */
+ csmap = (1 == dimm_ranks[0]) ? 0x1 : 0x2;
+ }
+ mtsdram(DDR0_10, DDR0_10_WRITE_MODEREG_ENCODE(0x0) |
+ DDR0_10_CS_MAP_ENCODE(csmap) |
+ DDR0_10_OCD_ADJUST_PUP_CS_0_ENCODE(0));
+}
+
+static void program_ddr0_11(unsigned long sdram_freq)
+{
+ unsigned long const t_xsnr_ps = 200000; /* 200 ns */
+ unsigned long t_xsnr_clk;
+
+ debug("t_xsnr_ps = %d\n", t_xsnr_ps);
+ t_xsnr_clk =
+ (MULDIV64(sdram_freq, t_xsnr_ps, ONE_BILLION) + 999) / 1000;
+ mtsdram(DDR0_11, DDR0_11_SREFRESH_ENCODE(0) |
+ DDR0_11_TXSNR_ENCODE(t_xsnr_clk) | DDR0_11_TXSR_ENCODE(200));
+}
+
+static void program_ddr0_22(unsigned long dimm_ranks[],
+ unsigned char const iic0_dimm_addr[],
+ unsigned long num_dimm_banks, unsigned long width)
+{
+#if defined(CONFIG_DDR_ECC)
+ unsigned long dimm_num;
+ unsigned long ecc_available = width >= 64;
+ u32 ddr0_22 = DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(0x26) |
+ DDR0_22_DQS_OUT_SHIFT_ENCODE(DQS_OUT_SHIFT) |
+ DDR0_22_DLL_DQS_BYPASS_8_ENCODE(DLL_DQS_BYPASS);
+
+ /* loop through all the DIMM slots on the board */
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ /* If a dimm is installed in a particular slot ... */
+ if (dimm_ranks[dimm_num]) {
+ /* Check for ECC */
+ if (0 == (spd_read(iic0_dimm_addr[dimm_num], 11) &
+ 0x02)) {
+ ecc_available = FALSE;
+ }
+ }
+ }
+ if (ecc_available) {
+ debug("ECC found on all DIMMs present\n");
+ mtsdram(DDR0_22, ddr0_22 | DDR0_22_CTRL_RAW_ENCODE(0x3));
+ } else {
+ debug("ECC not found on some or all DIMMs present\n");
+ mtsdram(DDR0_22, ddr0_22 | DDR0_22_CTRL_RAW_ENCODE(0x0));
+ }
+#else
+ mtsdram(DDR0_22, DDR0_22_CTRL_RAW_ENCODE(0x0) |
+ DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(0x26) |
+ DDR0_22_DQS_OUT_SHIFT_ENCODE(DQS_OUT_SHIFT) |
+ DDR0_22_DLL_DQS_BYPASS_8_ENCODE(DLL_DQS_BYPASS));
+#endif /* defined(CONFIG_DDR_ECC) */
+}
+
+static void program_ddr0_24(unsigned long ranks)
+{
+ u32 ddr0_24 = DDR0_24_RTT_PAD_TERMINATION_ENCODE(0x1) | /* 75 ohm */
+ DDR0_24_ODT_RD_MAP_CS1_ENCODE(0x0);
+
+ if (2 == ranks) {
+ /* Both chip selects in use */
+ ddr0_24 |= DDR0_24_ODT_WR_MAP_CS1_ENCODE(0x1) |
+ DDR0_24_ODT_WR_MAP_CS0_ENCODE(0x2);
+ } else {
+ /* One chip select in use */
+ /* One of the two fields added to ddr0_24 is a "don't care" */
+ ddr0_24 |= DDR0_24_ODT_WR_MAP_CS1_ENCODE(0x2) |
+ DDR0_24_ODT_WR_MAP_CS0_ENCODE(0x1);
+ }
+ mtsdram(DDR0_24, ddr0_24);
+}
+
+static void program_ddr0_26(unsigned long sdram_freq)
+{
+ unsigned long const t_ref_ps = 7800000; /* 7.8 us. refresh */
+ /* TODO: check definition of tRAS_MAX */
+ unsigned long const t_ras_max_ps = 9 * t_ref_ps;
+ unsigned long t_ras_max_clk;
+ unsigned long t_ref_clk;
+
+ /* Round down t_ras_max_clk and t_ref_clk */
+ debug("t_ras_max_ps = %d\n", t_ras_max_ps);
+ t_ras_max_clk = MULDIV64(sdram_freq, t_ras_max_ps, ONE_BILLION) / 1000;
+ debug("t_ref_ps = %d\n", t_ref_ps);
+ t_ref_clk = MULDIV64(sdram_freq, t_ref_ps, ONE_BILLION) / 1000;
+ mtsdram(DDR0_26, DDR0_26_TRAS_MAX_ENCODE(t_ras_max_clk) |
+ DDR0_26_TREF_ENCODE(t_ref_clk));
+}
+
+static void program_ddr0_27(unsigned long sdram_freq)
+{
+ unsigned long const t_init_ps = 200000000; /* 200 us. init */
+ unsigned long t_init_clk;
+
+ debug("t_init_ps = %d\n", t_init_ps);
+ t_init_clk =
+ (MULDIV64(sdram_freq, t_init_ps, ONE_BILLION) + 999) / 1000;
+ mtsdram(DDR0_27, DDR0_27_EMRS_DATA_ENCODE(0x0000) |
+ DDR0_27_TINIT_ENCODE(t_init_clk));
+}
+
+static void program_ddr0_43(unsigned long dimm_ranks[],
+ unsigned char const iic0_dimm_addr[],
+ unsigned long num_dimm_banks,
+ unsigned long sdram_freq,
+ unsigned long cols, unsigned long banks)
+{
+ unsigned long dimm_num;
+ unsigned long t_wr_ps = 0;
+ unsigned long t_wr_clk;
+ u32 ddr0_43 = DDR0_43_APREBIT_ENCODE(10) |
+ DDR0_43_COLUMN_SIZE_ENCODE(12 - cols) |
+ DDR0_43_EIGHT_BANK_MODE_ENCODE(8 == banks ? 1 : 0);
+
+ /*------------------------------------------------------------------
+ * Handle the timing. We need to find the worst case timing of all
+ * the dimm modules installed.
+ *-----------------------------------------------------------------*/
+ /* loop through all the DIMM slots on the board */
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ /* If a dimm is installed in a particular slot ... */
+ if (dimm_ranks[dimm_num]) {
+ unsigned long ps;
+
+ ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 36);
+ t_wr_ps = max(t_wr_ps, ps);
+ }
+ }
+ debug("t_wr_ps = %d\n", t_wr_ps);
+ t_wr_clk = (MULDIV64(sdram_freq, t_wr_ps, ONE_BILLION) + 999) / 1000;
+ mtsdram(DDR0_43, ddr0_43 | DDR0_43_TWR_ENCODE(t_wr_clk));
+}
+
+static void program_ddr0_44(unsigned long dimm_ranks[],
+ unsigned char const iic0_dimm_addr[],
+ unsigned long num_dimm_banks,
+ unsigned long sdram_freq)
+{
+ unsigned long dimm_num;
+ unsigned long t_rcd_ps = 0;
+ unsigned long t_rcd_clk;
+
+ /*------------------------------------------------------------------
+ * Handle the timing. We need to find the worst case timing of all
+ * the dimm modules installed.
+ *-----------------------------------------------------------------*/
+ /* loop through all the DIMM slots on the board */
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ /* If a dimm is installed in a particular slot ... */
+ if (dimm_ranks[dimm_num]) {
+ unsigned long ps;
+
+ ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 29);
+ t_rcd_ps = max(t_rcd_ps, ps);
+ }
+ }
+ debug("t_rcd_ps = %d\n", t_rcd_ps);
+ t_rcd_clk = (MULDIV64(sdram_freq, t_rcd_ps, ONE_BILLION) + 999) / 1000;
+ mtsdram(DDR0_44, DDR0_44_TRCD_ENCODE(t_rcd_clk));
+}
+
+/*-----------------------------------------------------------------------------+
+ * initdram. Initializes the 440EPx/GPx DDR SDRAM controller.
+ * Note: This routine runs from flash with a stack set up in the chip's
+ * sram space. It is important that the routine does not require .sbss, .bss or
+ * .data sections. It also cannot call routines that require these sections.
+ *-----------------------------------------------------------------------------*/
+/*-----------------------------------------------------------------------------
+ * Function: initdram
+ * Description: Configures SDRAM memory banks for DDR operation.
+ * Auto Memory Configuration option reads the DDR SDRAM EEPROMs
+ * via the IIC bus and then configures the DDR SDRAM memory
+ * banks appropriately. If Auto Memory Configuration is
+ * not used, it is assumed that no DIMM is plugged
+ *-----------------------------------------------------------------------------*/
+phys_size_t initdram(int board_type)
+{
+ unsigned char const iic0_dimm_addr[] = SPD_EEPROM_ADDRESS;
+ unsigned long dimm_ranks[MAXDIMMS];
+ unsigned long ranks;
+ unsigned long rows;
+ unsigned long banks;
+ unsigned long cols;
+ unsigned long width;
+ unsigned long const sdram_freq = get_bus_freq(0);
+ unsigned long const num_dimm_banks = sizeof(iic0_dimm_addr); /* on board dimm banks */
+ unsigned long cas_latency = 0; /* to quiet initialization warning */
+ unsigned long dram_size;
+
+ debug("\nEntering initdram()\n");
+
+ /*------------------------------------------------------------------
+ * Stop the DDR-SDRAM controller.
+ *-----------------------------------------------------------------*/
+ mtsdram(DDR0_02, DDR0_02_START_ENCODE(0));
+
+ /*
+ * Make sure I2C controller is initialized
+ * before continuing.
+ */
+ /* switch to correct I2C bus */
+ I2C_SET_BUS(CONFIG_SYS_SPD_BUS_NUM);
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+
+ /*------------------------------------------------------------------
+ * Clear out the serial presence detect buffers.
+ * Perform IIC reads from the dimm. Fill in the spds.
+ * Check to see if the dimm slots are populated
+ *-----------------------------------------------------------------*/
+ get_spd_info(dimm_ranks, &ranks, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Check the frequency supported for the dimms plugged.
+ *-----------------------------------------------------------------*/
+ check_frequency(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq);
+
+ /*------------------------------------------------------------------
+ * Check and get size information.
+ *-----------------------------------------------------------------*/
+ get_dimm_size(dimm_ranks, iic0_dimm_addr, num_dimm_banks, &rows, &banks,
+ &cols, &width);
+
+ /*------------------------------------------------------------------
+ * Check the voltage type for the dimms plugged.
+ *-----------------------------------------------------------------*/
+ check_voltage_type(dimm_ranks, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Program registers for SDRAM controller.
+ *-----------------------------------------------------------------*/
+ mtsdram(DDR0_00, DDR0_00_DLL_INCREMENT_ENCODE(0x19) |
+ DDR0_00_DLL_START_POINT_DECODE(0x0A));
+
+ mtsdram(DDR0_01, DDR0_01_PLB0_DB_CS_LOWER_ENCODE(0x01) |
+ DDR0_01_PLB0_DB_CS_UPPER_ENCODE(0x00) |
+ DDR0_01_INT_MASK_ENCODE(0xFF));
+
+ program_ddr0_03(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq,
+ rows, &cas_latency);
+
+ program_ddr0_04(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq);
+
+ program_ddr0_05(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq);
+
+ program_ddr0_06(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq);
+
+ /*
+ * TODO: tFAW not found in SPD. Value of 13 taken from Sequoia
+ * board SDRAM, but may be overly conservative.
+ */
+ mtsdram(DDR0_07, DDR0_07_NO_CMD_INIT_ENCODE(0) |
+ DDR0_07_TFAW_ENCODE(13) |
+ DDR0_07_AUTO_REFRESH_MODE_ENCODE(1) |
+ DDR0_07_AREFRESH_ENCODE(0));
+
+ mtsdram(DDR0_08, DDR0_08_WRLAT_ENCODE(cas_latency - 1) |
+ DDR0_08_TCPD_ENCODE(200) | DDR0_08_DQS_N_EN_ENCODE(0) |
+ DDR0_08_DDRII_ENCODE(1));
+
+ mtsdram(DDR0_09, DDR0_09_OCD_ADJUST_PDN_CS_0_ENCODE(0x00) |
+ DDR0_09_RTT_0_ENCODE(0x1) |
+ DDR0_09_WR_DQS_SHIFT_BYPASS_ENCODE(0x1D) |
+ DDR0_09_WR_DQS_SHIFT_ENCODE(DQS_OUT_SHIFT - 0x20));
+
+ program_ddr0_10(dimm_ranks, ranks);
+
+ program_ddr0_11(sdram_freq);
+
+ mtsdram(DDR0_12, DDR0_12_TCKE_ENCODE(3));
+
+ mtsdram(DDR0_14, DDR0_14_DLL_BYPASS_MODE_ENCODE(0) |
+ DDR0_14_REDUC_ENCODE(width <= 40 ? 1 : 0) |
+ DDR0_14_REG_DIMM_ENABLE_ENCODE(0));
+
+ mtsdram(DDR0_17, DDR0_17_DLL_DQS_DELAY_0_ENCODE(DLL_DQS_DELAY));
+
+ mtsdram(DDR0_18, DDR0_18_DLL_DQS_DELAY_4_ENCODE(DLL_DQS_DELAY) |
+ DDR0_18_DLL_DQS_DELAY_3_ENCODE(DLL_DQS_DELAY) |
+ DDR0_18_DLL_DQS_DELAY_2_ENCODE(DLL_DQS_DELAY) |
+ DDR0_18_DLL_DQS_DELAY_1_ENCODE(DLL_DQS_DELAY));
+
+ mtsdram(DDR0_19, DDR0_19_DLL_DQS_DELAY_8_ENCODE(DLL_DQS_DELAY) |
+ DDR0_19_DLL_DQS_DELAY_7_ENCODE(DLL_DQS_DELAY) |
+ DDR0_19_DLL_DQS_DELAY_6_ENCODE(DLL_DQS_DELAY) |
+ DDR0_19_DLL_DQS_DELAY_5_ENCODE(DLL_DQS_DELAY));
+
+ mtsdram(DDR0_20, DDR0_20_DLL_DQS_BYPASS_3_ENCODE(DLL_DQS_BYPASS) |
+ DDR0_20_DLL_DQS_BYPASS_2_ENCODE(DLL_DQS_BYPASS) |
+ DDR0_20_DLL_DQS_BYPASS_1_ENCODE(DLL_DQS_BYPASS) |
+ DDR0_20_DLL_DQS_BYPASS_0_ENCODE(DLL_DQS_BYPASS));
+
+ mtsdram(DDR0_21, DDR0_21_DLL_DQS_BYPASS_7_ENCODE(DLL_DQS_BYPASS) |
+ DDR0_21_DLL_DQS_BYPASS_6_ENCODE(DLL_DQS_BYPASS) |
+ DDR0_21_DLL_DQS_BYPASS_5_ENCODE(DLL_DQS_BYPASS) |
+ DDR0_21_DLL_DQS_BYPASS_4_ENCODE(DLL_DQS_BYPASS));
+
+ program_ddr0_22(dimm_ranks, iic0_dimm_addr, num_dimm_banks, width);
+
+ mtsdram(DDR0_23, DDR0_23_ODT_RD_MAP_CS0_ENCODE(0x0) |
+ DDR0_23_FWC_ENCODE(0));
+
+ program_ddr0_24(ranks);
+
+ program_ddr0_26(sdram_freq);
+
+ program_ddr0_27(sdram_freq);
+
+ mtsdram(DDR0_28, DDR0_28_EMRS3_DATA_ENCODE(0x0000) |
+ DDR0_28_EMRS2_DATA_ENCODE(0x0000));
+
+ mtsdram(DDR0_31, DDR0_31_XOR_CHECK_BITS_ENCODE(0x0000));
+
+ mtsdram(DDR0_42, DDR0_42_ADDR_PINS_ENCODE(14 - rows) |
+ DDR0_42_CASLAT_LIN_GATE_ENCODE(2 * cas_latency));
+
+ program_ddr0_43(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq,
+ cols, banks);
+
+ program_ddr0_44(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq);
+
+ denali_sdram_register_dump();
+
+ dram_size = (width >= 64) ? 8 : 4;
+ dram_size *= 1 << cols;
+ dram_size *= banks;
+ dram_size *= 1 << rows;
+ dram_size *= ranks;
+ debug("dram_size = %lu\n", dram_size);
+
+ /* Start the SDRAM controler */
+ mtsdram(DDR0_02, DDR0_02_START_ENCODE(1));
+ denali_wait_for_dlllock();
+
+#if defined(CONFIG_DDR_DATA_EYE)
+ /*
+ * Map the first 1 MiB of memory in the TLB, and perform the data eye
+ * search.
+ */
+ program_tlb(0, CONFIG_SYS_SDRAM_BASE, TLB_1MB_SIZE, TLB_WORD2_I_ENABLE);
+ denali_core_search_data_eye();
+ denali_sdram_register_dump();
+ remove_tlb(CONFIG_SYS_SDRAM_BASE, TLB_1MB_SIZE);
+#endif
+
+#if defined(CONFIG_ZERO_SDRAM) || defined(CONFIG_DDR_ECC)
+ program_tlb(0, CONFIG_SYS_SDRAM_BASE, dram_size, 0);
+ sync();
+ /* Zero the memory */
+ debug("Zeroing SDRAM...");
+#if defined(CONFIG_SYS_MEM_TOP_HIDE)
+ dcbz_area(CONFIG_SYS_SDRAM_BASE, dram_size - CONFIG_SYS_MEM_TOP_HIDE);
+#else
+#error Please define CONFIG_SYS_MEM_TOP_HIDE (see README) in your board config file
+#endif
+ /* Write modified dcache lines back to memory */
+ clean_dcache_range(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_SDRAM_BASE + dram_size - CONFIG_SYS_MEM_TOP_HIDE);
+ debug("Completed\n");
+ sync();
+ remove_tlb(CONFIG_SYS_SDRAM_BASE, dram_size);
+
+#if defined(CONFIG_DDR_ECC)
+ /*
+ * If ECC is enabled, clear and enable interrupts
+ */
+ if (is_ecc_enabled()) {
+ u32 val;
+
+ sync();
+ /* Clear error status */
+ mfsdram(DDR0_00, val);
+ mtsdram(DDR0_00, val | DDR0_00_INT_ACK_ALL);
+ /* Set 'int_mask' parameter to functionnal value */
+ mfsdram(DDR0_01, val);
+ mtsdram(DDR0_01, (val & ~DDR0_01_INT_MASK_MASK) |
+ DDR0_01_INT_MASK_ALL_OFF);
+#if defined(CONFIG_DDR_DATA_EYE)
+ /*
+ * Running denali_core_search_data_eye() when ECC is enabled
+ * causes non-ECC machine checks. This clears them.
+ */
+ print_mcsr();
+ mtspr(SPRN_MCSR, mfspr(SPRN_MCSR));
+ print_mcsr();
+#endif
+ sync();
+ }
+#endif /* defined(CONFIG_DDR_ECC) */
+#endif /* defined(CONFIG_ZERO_SDRAM) || defined(CONFIG_DDR_ECC) */
+
+ program_tlb(0, CONFIG_SYS_SDRAM_BASE, dram_size, MY_TLB_WORD2_I_ENABLE);
+ return dram_size;
+}
+
+void board_add_ram_info(int use_default)
+{
+ u32 val;
+
+ printf(" (ECC");
+ if (!is_ecc_enabled()) {
+ printf(" not");
+ }
+ printf(" enabled, %ld MHz", (2 * get_bus_freq(0)) / 1000000);
+
+ mfsdram(DDR0_03, val);
+ printf(", CL%d)", DDR0_03_CASLAT_LIN_DECODE(val) >> 1);
+}
+#endif /* CONFIG_SPD_EEPROM */
diff --git a/arch/ppc/cpu/ppc4xx/ecc.c b/arch/ppc/cpu/ppc4xx/ecc.c
new file mode 100644
index 0000000..f105605
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/ecc.c
@@ -0,0 +1,185 @@
+/*
+ * Copyright (c) 2008 Nuovation System Designs, LLC
+ * Grant Erickson <gerickson@nuovations.com>
+ *
+ * (C) Copyright 2005-2009
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2002
+ * Jun Gu, Artesyn Technology, jung@artesyncp.com
+ *
+ * (C) Copyright 2001
+ * Bill Hunter, Wave 7 Optics, williamhunter@attbi.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will abe useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Description:
+ * This file implements generic DRAM ECC initialization for
+ * PowerPC processors using a SDRAM DDR/DDR2 controller,
+ * including the 405EX(r), 440GP/GX/EP/GR, 440SP(E), and
+ * 460EX/GT.
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/mmu.h>
+#include <asm/cache.h>
+
+#include "ecc.h"
+
+#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR) || \
+ defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2)
+#if defined(CONFIG_DDR_ECC) || defined(CONFIG_SDRAM_ECC)
+
+#if defined(CONFIG_405EX)
+/*
+ * Currently only 405EX uses 16bit data bus width as an alternative
+ * option to 32bit data width (SDRAM0_MCOPT1_WDTH)
+ */
+#define SDRAM_DATA_ALT_WIDTH 2
+#else
+#define SDRAM_DATA_ALT_WIDTH 8
+#endif
+
+static void wait_ddr_idle(void)
+{
+ u32 val;
+
+ do {
+ mfsdram(SDRAM_MCSTAT, val);
+ } while ((val & SDRAM_MCSTAT_IDLE_MASK) == SDRAM_MCSTAT_IDLE_NOT);
+}
+
+static void program_ecc_addr(unsigned long start_address,
+ unsigned long num_bytes,
+ unsigned long tlb_word2_i_value)
+{
+ unsigned long current_address;
+ unsigned long end_address;
+ unsigned long address_increment;
+ unsigned long mcopt1;
+ char str[] = "ECC generation -";
+ char slash[] = "\\|/-\\|/-";
+ int loop = 0;
+ int loopi = 0;
+
+ current_address = start_address;
+ mfsdram(SDRAM_MCOPT1, mcopt1);
+ if ((mcopt1 & SDRAM_MCOPT1_MCHK_MASK) != SDRAM_MCOPT1_MCHK_NON) {
+ mtsdram(SDRAM_MCOPT1,
+ (mcopt1 & ~SDRAM_MCOPT1_MCHK_MASK) | SDRAM_MCOPT1_MCHK_GEN);
+ sync();
+ eieio();
+ wait_ddr_idle();
+
+ puts(str);
+
+#ifdef CONFIG_440
+ if (tlb_word2_i_value == TLB_WORD2_I_ENABLE) {
+#endif
+ /* ECC bit set method for non-cached memory */
+ if ((mcopt1 & SDRAM_MCOPT1_DMWD_MASK) == SDRAM_MCOPT1_DMWD_32)
+ address_increment = 4;
+ else
+ address_increment = SDRAM_DATA_ALT_WIDTH;
+ end_address = current_address + num_bytes;
+
+ while (current_address < end_address) {
+ *((unsigned long *)current_address) = 0;
+ current_address += address_increment;
+
+ if ((loop++ % (2 << 20)) == 0) {
+ putc('\b');
+ putc(slash[loopi++ % 8]);
+ }
+ }
+#ifdef CONFIG_440
+ } else {
+ /* ECC bit set method for cached memory */
+ dcbz_area(start_address, num_bytes);
+ /* Write modified dcache lines back to memory */
+ clean_dcache_range(start_address, start_address + num_bytes);
+ }
+#endif /* CONFIG_440 */
+
+ blank_string(strlen(str));
+
+ sync();
+ eieio();
+ wait_ddr_idle();
+
+ /* clear ECC error repoting registers */
+ mtsdram(SDRAM_ECCES, 0xffffffff);
+ mtdcr(0x4c, 0xffffffff);
+
+ mtsdram(SDRAM_MCOPT1,
+ (mcopt1 & ~SDRAM_MCOPT1_MCHK_MASK) | SDRAM_MCOPT1_MCHK_CHK_REP);
+ sync();
+ eieio();
+ wait_ddr_idle();
+ }
+}
+
+#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR)
+void ecc_init(unsigned long * const start, unsigned long size)
+{
+ /*
+ * Init ECC with cache disabled (on PPC's with IBM DDR
+ * controller (non DDR2), not tested with cache enabled yet
+ */
+ program_ecc_addr((u32)start, size, TLB_WORD2_I_ENABLE);
+}
+#endif
+
+#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2)
+void do_program_ecc(unsigned long tlb_word2_i_value)
+{
+ unsigned long mcopt1;
+ unsigned long mcopt2;
+ unsigned long mcstat;
+ phys_size_t memsize = sdram_memsize();
+
+ if (memsize > CONFIG_MAX_MEM_MAPPED) {
+ printf("\nWarning: Can't enable ECC on systems with more than 2GB of SDRAM!\n");
+ return;
+ }
+
+ mfsdram(SDRAM_MCOPT1, mcopt1);
+ mfsdram(SDRAM_MCOPT2, mcopt2);
+
+ if ((mcopt1 & SDRAM_MCOPT1_MCHK_MASK) != SDRAM_MCOPT1_MCHK_NON) {
+ /* DDR controller must be enabled and not in self-refresh. */
+ mfsdram(SDRAM_MCSTAT, mcstat);
+ if (((mcopt2 & SDRAM_MCOPT2_DCEN_MASK) == SDRAM_MCOPT2_DCEN_ENABLE)
+ && ((mcopt2 & SDRAM_MCOPT2_SREN_MASK) == SDRAM_MCOPT2_SREN_EXIT)
+ && ((mcstat & (SDRAM_MCSTAT_MIC_MASK | SDRAM_MCSTAT_SRMS_MASK))
+ == (SDRAM_MCSTAT_MIC_COMP | SDRAM_MCSTAT_SRMS_NOT_SF))) {
+
+ program_ecc_addr(0, memsize, tlb_word2_i_value);
+ }
+ }
+}
+#endif
+
+#endif /* defined(CONFIG_DDR_ECC) || defined(CONFIG_SDRAM_ECC) */
+#endif /* defined(CONFIG_SDRAM_PPC4xx_IBM_DDR)... */
diff --git a/arch/ppc/cpu/ppc4xx/ecc.h b/arch/ppc/cpu/ppc4xx/ecc.h
new file mode 100644
index 0000000..b258891
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/ecc.h
@@ -0,0 +1,75 @@
+/*
+ * Copyright (c) 2008 Nuovation System Designs, LLC
+ * Grant Erickson <gerickson@nuovations.com>
+ *
+ * Copyright (c) 2007-2009 DENX Software Engineering, GmbH
+ * Stefan Roese <sr@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will abe useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Description:
+ * This file implements ECC initialization for PowerPC processors
+ * using the IBM SDRAM DDR1 & DDR2 controller.
+ *
+ */
+
+#ifndef _ECC_H_
+#define _ECC_H_
+
+/*
+ * Since the IBM DDR controller used on 440GP/GX/EP/GR is not register
+ * compatible to the IBM DDR/2 controller used on 405EX/440SP/SPe/460EX/GT
+ * we need to make some processor dependant defines used later on by the
+ * driver.
+ */
+
+/* For 440GP/GX/EP/GR */
+#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR)
+#define SDRAM_MCOPT1 SDRAM_CFG0
+#define SDRAM_MCOPT1_MCHK_MASK SDRAM_CFG0_MCHK_MASK
+#define SDRAM_MCOPT1_MCHK_NON SDRAM_CFG0_MCHK_NON
+#define SDRAM_MCOPT1_MCHK_GEN SDRAM_CFG0_MCHK_GEN
+#define SDRAM_MCOPT1_MCHK_CHK SDRAM_CFG0_MCHK_CHK
+#define SDRAM_MCOPT1_MCHK_CHK_REP SDRAM_CFG0_MCHK_CHK
+#define SDRAM_MCOPT1_DMWD_MASK SDRAM_CFG0_DMWD_MASK
+#define SDRAM_MCOPT1_DMWD_32 SDRAM_CFG0_DMWD_32
+
+#define SDRAM_MCSTAT SDRAM0_MCSTS
+#define SDRAM_MCSTAT_IDLE_MASK SDRAM_MCSTS_CIS
+#define SDRAM_MCSTAT_IDLE_NOT SDRAM_MCSTS_IDLE_NOT
+
+#define SDRAM_ECCES SDRAM0_ECCESR
+#endif
+
+void ecc_init(unsigned long * const start, unsigned long size);
+void do_program_ecc(unsigned long tlb_word2_i_value);
+
+static void inline blank_string(int size)
+{
+ int i;
+
+ for (i = 0; i < size; i++)
+ putc('\b');
+ for (i = 0; i < size; i++)
+ putc(' ');
+ for (i = 0; i < size; i++)
+ putc('\b');
+}
+
+#endif /* _ECC_H_ */
diff --git a/arch/ppc/cpu/ppc4xx/fdt.c b/arch/ppc/cpu/ppc4xx/fdt.c
new file mode 100644
index 0000000..15a184b
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/fdt.c
@@ -0,0 +1,177 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <asm/cache.h>
+#include <ppc4xx.h>
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+#include <libfdt.h>
+#include <libfdt_env.h>
+#include <fdt_support.h>
+#include <asm/4xx_pcie.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void __ft_board_setup(void *blob, bd_t *bd)
+{
+ int rc;
+ int i;
+ u32 bxcr;
+ u32 ranges[EBC_NUM_BANKS * 4];
+ u32 *p = ranges;
+ char ebc_path[] = "/plb/opb/ebc";
+
+ ft_cpu_setup(blob, bd);
+
+ /*
+ * Read 4xx EBC bus bridge registers to get mappings of the
+ * peripheral banks into the OPB/PLB address space
+ */
+ for (i = 0; i < EBC_NUM_BANKS; i++) {
+ mtdcr(EBC0_CFGADDR, EBC_BXCR(i));
+ bxcr = mfdcr(EBC0_CFGDATA);
+
+ if ((bxcr & EBC_BXCR_BU_MASK) != EBC_BXCR_BU_NONE) {
+ *p++ = i;
+ *p++ = 0;
+ *p++ = bxcr & EBC_BXCR_BAS_MASK;
+ *p++ = EBC_BXCR_BANK_SIZE(bxcr);
+
+#ifdef CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
+ /* Try to update reg property in nor flash node too */
+ fdt_fixup_nor_flash_size(blob, i,
+ EBC_BXCR_BANK_SIZE(bxcr));
+#endif
+ }
+ }
+
+ /* Some 405 PPC's have EBC as direct PLB child in the dts */
+ if (fdt_path_offset(blob, ebc_path) < 0)
+ strcpy(ebc_path, "/plb/ebc");
+ rc = fdt_find_and_setprop(blob, ebc_path, "ranges", ranges,
+ (p - ranges) * sizeof(u32), 1);
+ if (rc) {
+ printf("Unable to update property EBC mappings, err=%s\n",
+ fdt_strerror(rc));
+ }
+}
+void ft_board_setup(void *blob, bd_t *bd) __attribute__((weak, alias("__ft_board_setup")));
+
+/*
+ * Fixup all PCIe nodes by setting the device_type property
+ * to "pci-endpoint" instead is "pci" for endpoint ports.
+ * This property will get checked later by the Linux driver
+ * to properly configure the PCIe port in Linux (again).
+ */
+void fdt_pcie_setup(void *blob)
+{
+ const char *compat = "ibm,plb-pciex";
+ const char *prop = "device_type";
+ const char *prop_val = "pci-endpoint";
+ const u32 *port;
+ int no;
+ int rc;
+
+ /* Search first PCIe node */
+ no = fdt_node_offset_by_compatible(blob, -1, compat);
+ while (no != -FDT_ERR_NOTFOUND) {
+ port = fdt_getprop(blob, no, "port", NULL);
+ if (port == NULL) {
+ printf("WARNING: could not find port property\n");
+ } else {
+ if (is_end_point(*port)) {
+ rc = fdt_setprop(blob, no, prop, prop_val,
+ strlen(prop_val) + 1);
+ if (rc < 0)
+ printf("WARNING: could not set %s for %s: %s.\n",
+ prop, compat, fdt_strerror(rc));
+ }
+ }
+
+ /* Jump to next PCIe node */
+ no = fdt_node_offset_by_compatible(blob, no, compat);
+ }
+}
+
+void ft_cpu_setup(void *blob, bd_t *bd)
+{
+ sys_info_t sys_info;
+ int off, ndepth = 0;
+
+ get_sys_info(&sys_info);
+
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, "timebase-frequency",
+ bd->bi_intfreq, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, "clock-frequency",
+ bd->bi_intfreq, 1);
+ do_fixup_by_path_u32(blob, "/plb", "clock-frequency", sys_info.freqPLB, 1);
+ do_fixup_by_path_u32(blob, "/plb/opb", "clock-frequency", sys_info.freqOPB, 1);
+
+ if (fdt_path_offset(blob, "/plb/opb/ebc") >= 0)
+ do_fixup_by_path_u32(blob, "/plb/opb/ebc", "clock-frequency",
+ sys_info.freqEBC, 1);
+ else
+ do_fixup_by_path_u32(blob, "/plb/ebc", "clock-frequency",
+ sys_info.freqEBC, 1);
+
+ fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+
+ /*
+ * Fixup all UART clocks for CPU internal UARTs
+ * (only these UARTs are definitely clocked by gd->uart_clk)
+ *
+ * These UARTs are direct childs of /plb/opb. This code
+ * does not touch any UARTs that are connected to the ebc.
+ */
+ off = fdt_path_offset(blob, "/plb/opb");
+ while ((off = fdt_next_node(blob, off, &ndepth)) >= 0) {
+ /*
+ * process all sub nodes and stop when we are back
+ * at the starting depth
+ */
+ if (ndepth <= 0)
+ break;
+
+ /* only update direct childs */
+ if ((ndepth == 1) &&
+ (fdt_node_check_compatible(blob, off, "ns16550") == 0))
+ fdt_setprop(blob, off,
+ "clock-frequency",
+ (void*)&(gd->uart_clk), 4);
+ }
+
+ /*
+ * Fixup all ethernet nodes
+ * Note: aliases in the dts are required for this
+ */
+ fdt_fixup_ethernet(blob);
+
+ /*
+ * Fixup all available PCIe nodes by setting the device_type property
+ */
+ fdt_pcie_setup(blob);
+}
+#endif /* CONFIG_OF_LIBFDT && CONFIG_OF_BOARD_SETUP */
diff --git a/arch/ppc/cpu/ppc4xx/gpio.c b/arch/ppc/cpu/ppc4xx/gpio.c
new file mode 100644
index 0000000..c0d351a
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/gpio.c
@@ -0,0 +1,255 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+
+#if defined(CONFIG_SYS_4xx_GPIO_TABLE)
+gpio_param_s const gpio_tab[GPIO_GROUP_MAX][GPIO_MAX] = CONFIG_SYS_4xx_GPIO_TABLE;
+#endif
+
+#if defined(GPIO0_OSRL)
+/* Only some 4xx variants support alternate funtions on the GPIO's */
+void gpio_config(int pin, int in_out, int gpio_alt, int out_val)
+{
+ u32 mask;
+ u32 mask2;
+ u32 val;
+ u32 offs = 0;
+ u32 offs2 = 0;
+ int pin2 = pin << 1;
+
+ if (pin >= GPIO_MAX) {
+ offs = 0x100;
+ pin -= GPIO_MAX;
+ }
+
+ if (pin >= GPIO_MAX/2) {
+ offs2 = 0x4;
+ pin2 = (pin - GPIO_MAX/2) << 1;
+ }
+
+ mask = 0x80000000 >> pin;
+ mask2 = 0xc0000000 >> pin2;
+
+ /* first set TCR to 0 */
+ out_be32((void *)GPIO0_TCR + offs, in_be32((void *)GPIO0_TCR + offs) & ~mask);
+
+ if (in_out == GPIO_OUT) {
+ val = in_be32((void *)GPIO0_OSRL + offs + offs2) & ~mask2;
+ switch (gpio_alt) {
+ case GPIO_ALT1:
+ val |= GPIO_ALT1_SEL >> pin2;
+ break;
+ case GPIO_ALT2:
+ val |= GPIO_ALT2_SEL >> pin2;
+ break;
+ case GPIO_ALT3:
+ val |= GPIO_ALT3_SEL >> pin2;
+ break;
+ }
+ out_be32((void *)GPIO0_OSRL + offs + offs2, val);
+
+ /* setup requested output value */
+ if (out_val == GPIO_OUT_0)
+ out_be32((void *)GPIO0_OR + offs,
+ in_be32((void *)GPIO0_OR + offs) & ~mask);
+ else if (out_val == GPIO_OUT_1)
+ out_be32((void *)GPIO0_OR + offs,
+ in_be32((void *)GPIO0_OR + offs) | mask);
+
+ /* now configure TCR to drive output if selected */
+ out_be32((void *)GPIO0_TCR + offs,
+ in_be32((void *)GPIO0_TCR + offs) | mask);
+ } else {
+ val = in_be32((void *)GPIO0_ISR1L + offs + offs2) & ~mask2;
+ val |= GPIO_IN_SEL >> pin2;
+ out_be32((void *)GPIO0_ISR1L + offs + offs2, val);
+ }
+}
+#endif /* GPIO_OSRL */
+
+void gpio_write_bit(int pin, int val)
+{
+ u32 offs = 0;
+
+ if (pin >= GPIO_MAX) {
+ offs = 0x100;
+ pin -= GPIO_MAX;
+ }
+
+ if (val)
+ out_be32((void *)GPIO0_OR + offs,
+ in_be32((void *)GPIO0_OR + offs) | GPIO_VAL(pin));
+ else
+ out_be32((void *)GPIO0_OR + offs,
+ in_be32((void *)GPIO0_OR + offs) & ~GPIO_VAL(pin));
+}
+
+int gpio_read_out_bit(int pin)
+{
+ u32 offs = 0;
+
+ if (pin >= GPIO_MAX) {
+ offs = 0x100;
+ pin -= GPIO_MAX;
+ }
+
+ return (in_be32((void *)GPIO0_OR + offs) & GPIO_VAL(pin) ? 1 : 0);
+}
+
+int gpio_read_in_bit(int pin)
+{
+ u32 offs = 0;
+
+ if (pin >= GPIO_MAX) {
+ offs = 0x100;
+ pin -= GPIO_MAX;
+ }
+
+ return (in_be32((void *)GPIO0_IR + offs) & GPIO_VAL(pin) ? 1 : 0);
+}
+
+#if defined(CONFIG_SYS_4xx_GPIO_TABLE)
+void gpio_set_chip_configuration(void)
+{
+ unsigned char i=0, j=0, offs=0, gpio_core;
+ unsigned long reg, core_add;
+
+ for (gpio_core=0; gpio_core<GPIO_GROUP_MAX; gpio_core++) {
+ j = 0;
+ offs = 0;
+ /* GPIO config of the GPIOs 0 to 31 */
+ for (i=0; i<GPIO_MAX; i++, j++) {
+ if (i == GPIO_MAX/2) {
+ offs = 4;
+ j = i-16;
+ }
+
+ core_add = gpio_tab[gpio_core][i].add;
+
+ if ((gpio_tab[gpio_core][i].in_out == GPIO_IN) ||
+ (gpio_tab[gpio_core][i].in_out == GPIO_BI)) {
+
+ switch (gpio_tab[gpio_core][i].alt_nb) {
+ case GPIO_SEL:
+ break;
+
+ case GPIO_ALT1:
+ reg = in_be32((void *)GPIO_IS1(core_add+offs))
+ & ~(GPIO_MASK >> (j*2));
+ reg = reg | (GPIO_IN_SEL >> (j*2));
+ out_be32((void *)GPIO_IS1(core_add+offs), reg);
+ break;
+
+ case GPIO_ALT2:
+ reg = in_be32((void *)GPIO_IS2(core_add+offs))
+ & ~(GPIO_MASK >> (j*2));
+ reg = reg | (GPIO_IN_SEL >> (j*2));
+ out_be32((void *)GPIO_IS2(core_add+offs), reg);
+ break;
+
+ case GPIO_ALT3:
+ reg = in_be32((void *)GPIO_IS3(core_add+offs))
+ & ~(GPIO_MASK >> (j*2));
+ reg = reg | (GPIO_IN_SEL >> (j*2));
+ out_be32((void *)GPIO_IS3(core_add+offs), reg);
+ break;
+ }
+ }
+
+ if ((gpio_tab[gpio_core][i].in_out == GPIO_OUT) ||
+ (gpio_tab[gpio_core][i].in_out == GPIO_BI)) {
+
+ u32 gpio_alt_sel = 0;
+
+ switch (gpio_tab[gpio_core][i].alt_nb) {
+ case GPIO_SEL:
+ /*
+ * Setup output value
+ * 1 -> high level
+ * 0 -> low level
+ * else -> don't touch
+ */
+ reg = in_be32((void *)GPIO_OR(core_add));
+ if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_1)
+ reg |= (0x80000000 >> (i));
+ else if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_0)
+ reg &= ~(0x80000000 >> (i));
+ out_be32((void *)GPIO_OR(core_add), reg);
+
+ reg = in_be32((void *)GPIO_TCR(core_add)) |
+ (0x80000000 >> (i));
+ out_be32((void *)GPIO_TCR(core_add), reg);
+
+ reg = in_be32((void *)GPIO_OS(core_add+offs))
+ & ~(GPIO_MASK >> (j*2));
+ out_be32((void *)GPIO_OS(core_add+offs), reg);
+ reg = in_be32((void *)GPIO_TS(core_add+offs))
+ & ~(GPIO_MASK >> (j*2));
+ out_be32((void *)GPIO_TS(core_add+offs), reg);
+ break;
+
+ case GPIO_ALT1:
+ gpio_alt_sel = GPIO_ALT1_SEL;
+ break;
+
+ case GPIO_ALT2:
+ gpio_alt_sel = GPIO_ALT2_SEL;
+ break;
+
+ case GPIO_ALT3:
+ gpio_alt_sel = GPIO_ALT3_SEL;
+ break;
+ }
+
+ if (0 != gpio_alt_sel) {
+ reg = in_be32((void *)GPIO_OS(core_add+offs))
+ & ~(GPIO_MASK >> (j*2));
+ reg = reg | (gpio_alt_sel >> (j*2));
+ out_be32((void *)GPIO_OS(core_add+offs), reg);
+
+ if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_1) {
+ reg = in_be32((void *)GPIO_TCR(core_add))
+ | (0x80000000 >> (i));
+ out_be32((void *)GPIO_TCR(core_add), reg);
+ reg = in_be32((void *)GPIO_TS(core_add+offs))
+ & ~(GPIO_MASK >> (j*2));
+ out_be32((void *)GPIO_TS(core_add+offs), reg);
+ } else {
+ reg = in_be32((void *)GPIO_TCR(core_add))
+ & ~(0x80000000 >> (i));
+ out_be32((void *)GPIO_TCR(core_add), reg);
+ reg = in_be32((void *)GPIO_TS(core_add+offs))
+ & ~(GPIO_MASK >> (j*2));
+ reg = reg | (gpio_alt_sel >> (j*2));
+ out_be32((void *)GPIO_TS(core_add+offs), reg);
+ }
+ }
+ }
+ }
+ }
+}
+#endif /* CONFIG_SYS_4xx_GPIO_TABLE */
diff --git a/arch/ppc/cpu/ppc4xx/interrupts.c b/arch/ppc/cpu/ppc4xx/interrupts.c
new file mode 100644
index 0000000..6db8421
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/interrupts.c
@@ -0,0 +1,216 @@
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002 (440 port)
+ * Scott McNutt, Artesyn Communication Producs, smcnutt@artsyncp.com
+ *
+ * (C) Copyright 2003 (440GX port)
+ * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
+ *
+ * (C) Copyright 2008 (PPC440X05 port for Virtex 5 FX)
+ * Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * Work supported by Qtechnology (htpp://qtec.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/interrupt.h>
+#include <ppc4xx.h>
+#include <ppc_asm.tmpl>
+#include <commproc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * CPM interrupt vector functions.
+ */
+struct irq_action {
+ interrupt_handler_t *handler;
+ void *arg;
+ int count;
+};
+static struct irq_action irq_vecs[IRQ_MAX];
+
+#if defined(CONFIG_440)
+
+/* SPRN changed in 440 */
+static __inline__ void set_evpr(unsigned long val)
+{
+ asm volatile("mtspr 0x03f,%0" : : "r" (val));
+}
+
+#else /* !defined(CONFIG_440) */
+
+static __inline__ void set_pit(unsigned long val)
+{
+ asm volatile("mtpit %0" : : "r" (val));
+}
+
+
+static __inline__ void set_tcr(unsigned long val)
+{
+ asm volatile("mttcr %0" : : "r" (val));
+}
+
+
+static __inline__ void set_evpr(unsigned long val)
+{
+ asm volatile("mtevpr %0" : : "r" (val));
+}
+#endif /* defined(CONFIG_440 */
+
+int interrupt_init_cpu (unsigned *decrementer_count)
+{
+ int vec;
+ unsigned long val;
+
+ /* decrementer is automatically reloaded */
+ *decrementer_count = 0;
+
+ /*
+ * Mark all irqs as free
+ */
+ for (vec = 0; vec < IRQ_MAX; vec++) {
+ irq_vecs[vec].handler = NULL;
+ irq_vecs[vec].arg = NULL;
+ irq_vecs[vec].count = 0;
+ }
+
+#ifdef CONFIG_4xx
+ /*
+ * Init PIT
+ */
+#if defined(CONFIG_440)
+ val = mfspr( SPRN_TCR );
+ val &= (~0x04400000); /* clear DIS & ARE */
+ mtspr( SPRN_TCR, val );
+ mtspr( SPRN_DEC, 0 ); /* Prevent exception after TSR clear*/
+ mtspr( SPRN_DECAR, 0 ); /* clear reload */
+ mtspr( SPRN_TSR, 0x08000000 ); /* clear DEC status */
+ val = gd->bd->bi_intfreq/1000; /* 1 msec */
+ mtspr( SPRN_DECAR, val ); /* Set auto-reload value */
+ mtspr( SPRN_DEC, val ); /* Set inital val */
+#else
+ set_pit(gd->bd->bi_intfreq / 1000);
+#endif
+#endif /* CONFIG_4xx */
+
+#ifdef CONFIG_ADCIOP
+ /*
+ * Init PIT
+ */
+ set_pit(66000);
+#endif
+
+ /*
+ * Enable PIT
+ */
+ val = mfspr(SPRN_TCR);
+ val |= 0x04400000;
+ mtspr(SPRN_TCR, val);
+
+ /*
+ * Set EVPR to 0
+ */
+ set_evpr(0x00000000);
+
+ /*
+ * Call uic or xilinx_irq pic_enable
+ */
+ pic_enable();
+
+ return (0);
+}
+
+void timer_interrupt_cpu(struct pt_regs *regs)
+{
+ /* nothing to do here */
+ return;
+}
+
+void interrupt_run_handler(int vec)
+{
+ irq_vecs[vec].count++;
+
+ if (irq_vecs[vec].handler != NULL) {
+ /* call isr */
+ (*irq_vecs[vec].handler) (irq_vecs[vec].arg);
+ } else {
+ pic_irq_disable(vec);
+ printf("Masking bogus interrupt vector %d\n", vec);
+ }
+
+ pic_irq_ack(vec);
+ return;
+}
+
+void irq_install_handler(int vec, interrupt_handler_t * handler, void *arg)
+{
+ /*
+ * Print warning when replacing with a different irq vector
+ */
+ if ((irq_vecs[vec].handler != NULL) && (irq_vecs[vec].handler != handler)) {
+ printf("Interrupt vector %d: handler 0x%x replacing 0x%x\n",
+ vec, (uint) handler, (uint) irq_vecs[vec].handler);
+ }
+ irq_vecs[vec].handler = handler;
+ irq_vecs[vec].arg = arg;
+
+ pic_irq_enable(vec);
+ return;
+}
+
+void irq_free_handler(int vec)
+{
+ debug("Free interrupt for vector %d ==> %p\n",
+ vec, irq_vecs[vec].handler);
+
+ pic_irq_disable(vec);
+
+ irq_vecs[vec].handler = NULL;
+ irq_vecs[vec].arg = NULL;
+ return;
+}
+
+#if defined(CONFIG_CMD_IRQ)
+int do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ int vec;
+
+ printf ("Interrupt-Information:\n");
+ printf ("Nr Routine Arg Count\n");
+
+ for (vec = 0; vec < IRQ_MAX; vec++) {
+ if (irq_vecs[vec].handler != NULL) {
+ printf ("%02d %08lx %08lx %d\n",
+ vec,
+ (ulong)irq_vecs[vec].handler,
+ (ulong)irq_vecs[vec].arg,
+ irq_vecs[vec].count);
+ }
+ }
+
+ return 0;
+}
+#endif
diff --git a/arch/ppc/cpu/ppc4xx/iop480_uart.c b/arch/ppc/cpu/ppc4xx/iop480_uart.c
new file mode 100644
index 0000000..0e3423f
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/iop480_uart.c
@@ -0,0 +1,237 @@
+/*
+ * (C) Copyright 2000-2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <commproc.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <watchdog.h>
+
+#ifdef CONFIG_SERIAL_MULTI
+#include <serial.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_IOP480
+
+#define SPU_BASE 0x40000000
+
+#define spu_LineStat_rc 0x00 /* Line Status Register (Read/Clear) */
+#define spu_LineStat_w 0x04 /* Line Status Register (Set) */
+#define spu_Handshk_rc 0x08 /* Handshake Status Register (Read/Clear) */
+#define spu_Handshk_w 0x0c /* Handshake Status Register (Set) */
+#define spu_BRateDivh 0x10 /* Baud rate divisor high */
+#define spu_BRateDivl 0x14 /* Baud rate divisor low */
+#define spu_CtlReg 0x18 /* Control Register */
+#define spu_RxCmd 0x1c /* Rx Command Register */
+#define spu_TxCmd 0x20 /* Tx Command Register */
+#define spu_RxBuff 0x24 /* Rx data buffer */
+#define spu_TxBuff 0x24 /* Tx data buffer */
+
+/*-----------------------------------------------------------------------------+
+ | Line Status Register.
+ +-----------------------------------------------------------------------------*/
+#define asyncLSRport1 0x40000000
+#define asyncLSRport1set 0x40000004
+#define asyncLSRDataReady 0x80
+#define asyncLSRFramingError 0x40
+#define asyncLSROverrunError 0x20
+#define asyncLSRParityError 0x10
+#define asyncLSRBreakInterrupt 0x08
+#define asyncLSRTxHoldEmpty 0x04
+#define asyncLSRTxShiftEmpty 0x02
+
+/*-----------------------------------------------------------------------------+
+ | Handshake Status Register.
+ +-----------------------------------------------------------------------------*/
+#define asyncHSRport1 0x40000008
+#define asyncHSRport1set 0x4000000c
+#define asyncHSRDsr 0x80
+#define asyncLSRCts 0x40
+
+/*-----------------------------------------------------------------------------+
+ | Control Register.
+ +-----------------------------------------------------------------------------*/
+#define asyncCRport1 0x40000018
+#define asyncCRNormal 0x00
+#define asyncCRLoopback 0x40
+#define asyncCRAutoEcho 0x80
+#define asyncCRDtr 0x20
+#define asyncCRRts 0x10
+#define asyncCRWordLength7 0x00
+#define asyncCRWordLength8 0x08
+#define asyncCRParityDisable 0x00
+#define asyncCRParityEnable 0x04
+#define asyncCREvenParity 0x00
+#define asyncCROddParity 0x02
+#define asyncCRStopBitsOne 0x00
+#define asyncCRStopBitsTwo 0x01
+#define asyncCRDisableDtrRts 0x00
+
+/*-----------------------------------------------------------------------------+
+ | Receiver Command Register.
+ +-----------------------------------------------------------------------------*/
+#define asyncRCRport1 0x4000001c
+#define asyncRCRDisable 0x00
+#define asyncRCREnable 0x80
+#define asyncRCRIntDisable 0x00
+#define asyncRCRIntEnabled 0x20
+#define asyncRCRDMACh2 0x40
+#define asyncRCRDMACh3 0x60
+#define asyncRCRErrorInt 0x10
+#define asyncRCRPauseEnable 0x08
+
+/*-----------------------------------------------------------------------------+
+ | Transmitter Command Register.
+ +-----------------------------------------------------------------------------*/
+#define asyncTCRport1 0x40000020
+#define asyncTCRDisable 0x00
+#define asyncTCREnable 0x80
+#define asyncTCRIntDisable 0x00
+#define asyncTCRIntEnabled 0x20
+#define asyncTCRDMACh2 0x40
+#define asyncTCRDMACh3 0x60
+#define asyncTCRTxEmpty 0x10
+#define asyncTCRErrorInt 0x08
+#define asyncTCRStopPause 0x04
+#define asyncTCRBreakGen 0x02
+
+/*-----------------------------------------------------------------------------+
+ | Miscellanies defines.
+ +-----------------------------------------------------------------------------*/
+#define asyncTxBufferport1 0x40000024
+#define asyncRxBufferport1 0x40000024
+#define asyncDLABLsbport1 0x40000014
+#define asyncDLABMsbport1 0x40000010
+#define asyncXOFFchar 0x13
+#define asyncXONchar 0x11
+
+/*
+ * Minimal serial functions needed to use one of the SMC ports
+ * as serial console interface.
+ */
+
+int serial_init (void)
+{
+ volatile char val;
+ unsigned short br_reg;
+
+ br_reg = ((((CONFIG_CPUCLOCK * 1000000) / 16) / gd->baudrate) - 1);
+
+ /*
+ * Init onboard UART
+ */
+ out_8((u8 *)SPU_BASE + spu_LineStat_rc, 0x78); /* Clear all bits in Line Status Reg */
+ out_8((u8 *)SPU_BASE + spu_BRateDivl, (br_reg & 0x00ff)); /* Set baud rate divisor... */
+ out_8((u8 *)SPU_BASE + spu_BRateDivh, ((br_reg & 0xff00) >> 8)); /* ... */
+ out_8((u8 *)SPU_BASE + spu_CtlReg, 0x08); /* Set 8 bits, no parity and 1 stop bit */
+ out_8((u8 *)SPU_BASE + spu_RxCmd, 0xb0); /* Enable Rx */
+ out_8((u8 *)SPU_BASE + spu_TxCmd, 0x9c); /* Enable Tx */
+ out_8((u8 *)SPU_BASE + spu_Handshk_rc, 0xff); /* Clear Handshake */
+ val = in_8((u8 *)SPU_BASE + spu_RxBuff); /* Dummy read, to clear receiver */
+
+ return (0);
+}
+
+void serial_setbrg (void)
+{
+ unsigned short br_reg;
+
+ br_reg = ((((CONFIG_CPUCLOCK * 1000000) / 16) / gd->baudrate) - 1);
+
+ out_8((u8 *)SPU_BASE + spu_BRateDivl,
+ (br_reg & 0x00ff)); /* Set baud rate divisor... */
+ out_8((u8 *)SPU_BASE + spu_BRateDivh,
+ ((br_reg & 0xff00) >> 8)); /* ... */
+}
+
+void serial_putc (const char c)
+{
+ if (c == '\n')
+ serial_putc ('\r');
+
+ /* load status from handshake register */
+ if (in_8((u8 *)SPU_BASE + spu_Handshk_rc) != 00)
+ out_8((u8 *)SPU_BASE + spu_Handshk_rc, 0xff); /* Clear Handshake */
+
+ out_8((u8 *)SPU_BASE + spu_TxBuff, c); /* Put char */
+
+ while ((in_8((u8 *)SPU_BASE + spu_LineStat_rc) & 04) != 04) {
+ if (in_8((u8 *)SPU_BASE + spu_Handshk_rc) != 00)
+ out_8((u8 *)SPU_BASE + spu_Handshk_rc, 0xff); /* Clear Handshake */
+ }
+}
+
+void serial_puts (const char *s)
+{
+ while (*s) {
+ serial_putc (*s++);
+ }
+}
+
+int serial_getc ()
+{
+ unsigned char status = 0;
+
+ while (1) {
+ status = in_8((u8 *)asyncLSRport1);
+ if ((status & asyncLSRDataReady) != 0x0) {
+ break;
+ }
+ if ((status & ( asyncLSRFramingError |
+ asyncLSROverrunError |
+ asyncLSRParityError |
+ asyncLSRBreakInterrupt )) != 0) {
+ (void) out_8((u8 *)asyncLSRport1,
+ asyncLSRFramingError |
+ asyncLSROverrunError |
+ asyncLSRParityError |
+ asyncLSRBreakInterrupt );
+ }
+ }
+ return (0x000000ff & (int) in_8((u8 *)asyncRxBufferport1));
+}
+
+int serial_tstc ()
+{
+ unsigned char status;
+
+ status = in_8((u8 *)asyncLSRport1);
+ if ((status & asyncLSRDataReady) != 0x0) {
+ return (1);
+ }
+ if ((status & ( asyncLSRFramingError |
+ asyncLSROverrunError |
+ asyncLSRParityError |
+ asyncLSRBreakInterrupt )) != 0) {
+ (void) out_8((u8 *)asyncLSRport1,
+ asyncLSRFramingError |
+ asyncLSROverrunError |
+ asyncLSRParityError |
+ asyncLSRBreakInterrupt);
+ }
+ return 0;
+}
+
+#endif /* CONFIG_IOP480 */
diff --git a/arch/ppc/cpu/ppc4xx/kgdb.S b/arch/ppc/cpu/ppc4xx/kgdb.S
new file mode 100644
index 0000000..4227a4c
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/kgdb.S
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2000 Murray Jensen <Murray.Jensen@cmst.csiro.au>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <command.h>
+#include <ppc4xx.h>
+#include <version.h>
+
+#define CONFIG_405GP 1 /* needed for Linux kernel header files */
+#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#if defined(CONFIG_CMD_KGDB)
+ /*
+ * cache flushing routines for kgdb
+ */
+
+ .globl kgdb_flush_cache_all
+kgdb_flush_cache_all:
+ /* icache */
+ iccci r0,r0 /* iccci invalidates the entire I cache */
+ /* dcache */
+ addi r6,0,0x0000 /* clear GPR 6 */
+ addi r7,r0, 128 /* do loop for # of dcache lines */
+ /* NOTE: dccci invalidates both */
+ mtctr r7 /* ways in the D cache */
+..dcloop:
+ dccci 0,r6 /* invalidate line */
+ addi r6,r6, 32 /* bump to next line */
+ bdnz ..dcloop
+ blr
+
+ .globl kgdb_flush_cache_range
+kgdb_flush_cache_range:
+ li r5,L1_CACHE_BYTES-1
+ andc r3,r3,r5
+ subf r4,r3,r4
+ add r4,r4,r5
+ srwi. r4,r4,L1_CACHE_SHIFT
+ beqlr
+ mtctr r4
+ mr r6,r3
+1: dcbst 0,r3
+ addi r3,r3,L1_CACHE_BYTES
+ bdnz 1b
+ sync /* wait for dcbst's to get to ram */
+ mtctr r4
+2: icbi 0,r6
+ addi r6,r6,L1_CACHE_BYTES
+ bdnz 2b
+ SYNC
+ blr
+
+#endif
diff --git a/arch/ppc/cpu/ppc4xx/miiphy.c b/arch/ppc/cpu/ppc4xx/miiphy.c
new file mode 100644
index 0000000..22ed5c2
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/miiphy.c
@@ -0,0 +1,366 @@
+/*-----------------------------------------------------------------------------+
+ | This source code is dual-licensed. You may use it under the terms of the
+ | GNU General Public License version 2, or under the license below.
+ |
+ | This source code has been made available to you by IBM on an AS-IS
+ | basis. Anyone receiving this source is licensed under IBM
+ | copyrights to use it in any way he or she deems fit, including
+ | copying it, modifying it, compiling it, and redistributing it either
+ | with or without modifications. No license under IBM patents or
+ | patent applications is to be implied by the copyright license.
+ |
+ | Any user of this software should understand that IBM cannot provide
+ | technical support for this software and will not be responsible for
+ | any consequences resulting from the use of this software.
+ |
+ | Any person who transfers this source code or any derivative work
+ | must include the IBM copyright notice, this paragraph, and the
+ | preceding two paragraphs in the transferred software.
+ |
+ | COPYRIGHT I B M CORPORATION 1995
+ | LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
+ +-----------------------------------------------------------------------------*/
+/*-----------------------------------------------------------------------------+
+ |
+ | File Name: miiphy.c
+ |
+ | Function: This module has utilities for accessing the MII PHY through
+ | the EMAC3 macro.
+ |
+ | Author: Mark Wisner
+ |
+ +-----------------------------------------------------------------------------*/
+
+/* define DEBUG for debugging output (obviously ;-)) */
+#if 0
+#define DEBUG
+#endif
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <ppc_asm.tmpl>
+#include <commproc.h>
+#include <ppc4xx_enet.h>
+#include <405_mal.h>
+#include <miiphy.h>
+
+#if !defined(CONFIG_PHY_CLK_FREQ)
+#define CONFIG_PHY_CLK_FREQ 0
+#endif
+
+/***********************************************************/
+/* Dump out to the screen PHY regs */
+/***********************************************************/
+
+void miiphy_dump (char *devname, unsigned char addr)
+{
+ unsigned long i;
+ unsigned short data;
+
+ for (i = 0; i < 0x1A; i++) {
+ if (miiphy_read (devname, addr, i, &data)) {
+ printf ("read error for reg %lx\n", i);
+ return;
+ }
+ printf ("Phy reg %lx ==> %4x\n", i, data);
+
+ /* jump to the next set of regs */
+ if (i == 0x07)
+ i = 0x0f;
+
+ } /* end for loop */
+} /* end dump */
+
+/***********************************************************/
+/* (Re)start autonegotiation */
+/***********************************************************/
+int phy_setup_aneg (char *devname, unsigned char addr)
+{
+ u16 bmcr;
+
+#if defined(CONFIG_PHY_DYNAMIC_ANEG)
+ /*
+ * Set up advertisement based on capablilities reported by the PHY.
+ * This should work for both copper and fiber.
+ */
+ u16 bmsr;
+#if defined(CONFIG_PHY_GIGE)
+ u16 exsr = 0x0000;
+#endif
+
+ miiphy_read (devname, addr, PHY_BMSR, &bmsr);
+
+#if defined(CONFIG_PHY_GIGE)
+ if (bmsr & PHY_BMSR_EXT_STAT)
+ miiphy_read (devname, addr, PHY_EXSR, &exsr);
+
+ if (exsr & (PHY_EXSR_1000XF | PHY_EXSR_1000XH)) {
+ /* 1000BASE-X */
+ u16 anar = 0x0000;
+
+ if (exsr & PHY_EXSR_1000XF)
+ anar |= PHY_X_ANLPAR_FD;
+
+ if (exsr & PHY_EXSR_1000XH)
+ anar |= PHY_X_ANLPAR_HD;
+
+ miiphy_write (devname, addr, PHY_ANAR, anar);
+ } else
+#endif
+ {
+ u16 anar, btcr;
+
+ miiphy_read (devname, addr, PHY_ANAR, &anar);
+ anar &= ~(0x5000 | PHY_ANLPAR_T4 | PHY_ANLPAR_TXFD |
+ PHY_ANLPAR_TX | PHY_ANLPAR_10FD | PHY_ANLPAR_10);
+
+ miiphy_read (devname, addr, PHY_1000BTCR, &btcr);
+ btcr &= ~(0x00FF | PHY_1000BTCR_1000FD | PHY_1000BTCR_1000HD);
+
+ if (bmsr & PHY_BMSR_100T4)
+ anar |= PHY_ANLPAR_T4;
+
+ if (bmsr & PHY_BMSR_100TXF)
+ anar |= PHY_ANLPAR_TXFD;
+
+ if (bmsr & PHY_BMSR_100TXH)
+ anar |= PHY_ANLPAR_TX;
+
+ if (bmsr & PHY_BMSR_10TF)
+ anar |= PHY_ANLPAR_10FD;
+
+ if (bmsr & PHY_BMSR_10TH)
+ anar |= PHY_ANLPAR_10;
+
+ miiphy_write (devname, addr, PHY_ANAR, anar);
+
+#if defined(CONFIG_PHY_GIGE)
+ if (exsr & PHY_EXSR_1000TF)
+ btcr |= PHY_1000BTCR_1000FD;
+
+ if (exsr & PHY_EXSR_1000TH)
+ btcr |= PHY_1000BTCR_1000HD;
+
+ miiphy_write (devname, addr, PHY_1000BTCR, btcr);
+#endif
+ }
+
+#else /* defined(CONFIG_PHY_DYNAMIC_ANEG) */
+ /*
+ * Set up standard advertisement
+ */
+ u16 adv;
+
+ miiphy_read (devname, addr, PHY_ANAR, &adv);
+ adv |= (PHY_ANLPAR_ACK | PHY_ANLPAR_TXFD | PHY_ANLPAR_TX |
+ PHY_ANLPAR_10FD | PHY_ANLPAR_10);
+ miiphy_write (devname, addr, PHY_ANAR, adv);
+
+ miiphy_read (devname, addr, PHY_1000BTCR, &adv);
+ adv |= (0x0300);
+ miiphy_write (devname, addr, PHY_1000BTCR, adv);
+
+#endif /* defined(CONFIG_PHY_DYNAMIC_ANEG) */
+
+ /* Start/Restart aneg */
+ miiphy_read (devname, addr, PHY_BMCR, &bmcr);
+ bmcr |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+ miiphy_write (devname, addr, PHY_BMCR, bmcr);
+
+ return 0;
+}
+
+/***********************************************************/
+/* read a phy reg and return the value with a rc */
+/***********************************************************/
+/* AMCC_TODO:
+ * Find out of the choice for the emac for MDIO is from the bridges,
+ * i.e. ZMII or RGMII as approporiate. If the bridges are not used
+ * to determine the emac for MDIO, then is the SDR0_ETH_CFG[MDIO_SEL]
+ * used? If so, then this routine below does not apply to the 460EX/GT.
+ *
+ * sr: Currently on 460EX only EMAC0 works with MDIO, so we always
+ * return EMAC0 offset here
+ * vg: For 460EX/460GT if internal GPCS PHY address is specified
+ * return appropriate EMAC offset
+ */
+unsigned int miiphy_getemac_offset(u8 addr)
+{
+#if (defined(CONFIG_440) && \
+ !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \
+ !defined(CONFIG_460EX) && !defined(CONFIG_460GT)) && \
+ defined(CONFIG_NET_MULTI)
+ unsigned long zmii;
+ unsigned long eoffset;
+
+ /* Need to find out which mdi port we're using */
+ zmii = in_be32((void *)ZMII0_FER);
+
+ if (zmii & (ZMII_FER_MDI << ZMII_FER_V (0)))
+ /* using port 0 */
+ eoffset = 0;
+
+ else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (1)))
+ /* using port 1 */
+ eoffset = 0x100;
+
+ else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (2)))
+ /* using port 2 */
+ eoffset = 0x400;
+
+ else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (3)))
+ /* using port 3 */
+ eoffset = 0x600;
+
+ else {
+ /* None of the mdi ports are enabled! */
+ /* enable port 0 */
+ zmii |= ZMII_FER_MDI << ZMII_FER_V (0);
+ out_be32((void *)ZMII0_FER, zmii);
+ eoffset = 0;
+ /* need to soft reset port 0 */
+ zmii = in_be32((void *)EMAC0_MR0);
+ zmii |= EMAC_MR0_SRST;
+ out_be32((void *)EMAC0_MR0, zmii);
+ }
+
+ return (eoffset);
+#else
+
+#if defined(CONFIG_NET_MULTI) && defined(CONFIG_405EX)
+ unsigned long rgmii;
+ int devnum = 1;
+
+ rgmii = in_be32((void *)RGMII_FER);
+ if (rgmii & (1 << (19 - devnum)))
+ return 0x100;
+#endif
+
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ u32 eoffset = 0;
+
+ switch (addr) {
+#if defined(CONFIG_HAS_ETH1) && defined(CONFIG_GPCS_PHY1_ADDR)
+ case CONFIG_GPCS_PHY1_ADDR:
+ if (addr == EMAC_MR1_IPPA_GET(in_be32((void *)EMAC0_MR1 + 0x100)))
+ eoffset = 0x100;
+ break;
+#endif
+#if defined(CONFIG_HAS_ETH2) && defined(CONFIG_GPCS_PHY2_ADDR)
+ case CONFIG_GPCS_PHY2_ADDR:
+ if (addr == EMAC_MR1_IPPA_GET(in_be32((void *)EMAC0_MR1 + 0x300)))
+ eoffset = 0x300;
+ break;
+#endif
+#if defined(CONFIG_HAS_ETH3) && defined(CONFIG_GPCS_PHY3_ADDR)
+ case CONFIG_GPCS_PHY3_ADDR:
+ if (addr == EMAC_MR1_IPPA_GET(in_be32((void *)EMAC0_MR1 + 0x400)))
+ eoffset = 0x400;
+ break;
+#endif
+ default:
+ eoffset = 0;
+ break;
+ }
+ return eoffset;
+#endif
+
+ return 0;
+#endif
+}
+
+static int emac_miiphy_wait(u32 emac_reg)
+{
+ u32 sta_reg;
+ int i;
+
+ /* wait for completion */
+ i = 0;
+ do {
+ sta_reg = in_be32((void *)EMAC0_STACR + emac_reg);
+ if (i++ > 5) {
+ debug("%s [%d]: Timeout! EMAC0_STACR=0x%0x\n", __func__,
+ __LINE__, sta_reg);
+ return -1;
+ }
+ udelay(10);
+ } while ((sta_reg & EMAC_STACR_OC) == EMAC_STACR_OC_MASK);
+
+ return 0;
+}
+
+static int emac_miiphy_command(u8 addr, u8 reg, int cmd, u16 value)
+{
+ u32 emac_reg;
+ u32 sta_reg;
+
+ emac_reg = miiphy_getemac_offset(addr);
+
+ /* wait for completion */
+ if (emac_miiphy_wait(emac_reg) != 0)
+ return -1;
+
+ sta_reg = reg; /* reg address */
+
+ /* set clock (50MHz) and read flags */
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+ defined(CONFIG_405EX)
+#if defined(CONFIG_IBM_EMAC4_V4) /* EMAC4 V4 changed bit setting */
+ sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | cmd;
+#else
+ sta_reg |= cmd;
+#endif
+#else
+ sta_reg = (sta_reg | cmd) & ~EMAC_STACR_CLK_100MHZ;
+#endif
+
+ /* Some boards (mainly 405EP based) define the PHY clock freqency fixed */
+ sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ;
+ sta_reg = sta_reg | ((u32)addr << 5); /* Phy address */
+ sta_reg = sta_reg | EMAC_STACR_OC_MASK; /* new IBM emac v4 */
+ if (cmd == EMAC_STACR_WRITE)
+ memcpy(&sta_reg, &value, 2); /* put in data */
+
+ out_be32((void *)EMAC0_STACR + emac_reg, sta_reg);
+ debug("%s [%d]: sta_reg=%08x\n", __func__, __LINE__, sta_reg);
+
+ /* wait for completion */
+ if (emac_miiphy_wait(emac_reg) != 0)
+ return -1;
+
+ debug("%s [%d]: sta_reg=%08x\n", __func__, __LINE__, sta_reg);
+ if ((sta_reg & EMAC_STACR_PHYE) != 0)
+ return -1;
+
+ return 0;
+}
+
+int emac4xx_miiphy_read (char *devname, unsigned char addr, unsigned char reg,
+ unsigned short *value)
+{
+ unsigned long sta_reg;
+ unsigned long emac_reg;
+
+ emac_reg = miiphy_getemac_offset(addr);
+
+ if (emac_miiphy_command(addr, reg, EMAC_STACR_READ, 0) != 0)
+ return -1;
+
+ sta_reg = in_be32((void *)EMAC0_STACR + emac_reg);
+ *value = sta_reg >> 16;
+
+ return 0;
+}
+
+/***********************************************************/
+/* write a phy reg and return the value with a rc */
+/***********************************************************/
+
+int emac4xx_miiphy_write (char *devname, unsigned char addr, unsigned char reg,
+ unsigned short value)
+{
+ return emac_miiphy_command(addr, reg, EMAC_STACR_WRITE, value);
+}
diff --git a/arch/ppc/cpu/ppc4xx/reginfo.c b/arch/ppc/cpu/ppc4xx/reginfo.c
new file mode 100644
index 0000000..a975667
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/reginfo.c
@@ -0,0 +1,370 @@
+/*
+ *(C) Copyright 2005-2009 Netstal Maschinen AG
+ * Bruno Hars (Bruno.Hars@netstal.com)
+ * Niklaus Giger (Niklaus.Giger@netstal.com)
+ *
+ * This source code is free software; you can redistribute it
+ * and/or modify it in source code form under the terms of the GNU
+ * General Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ */
+
+/*
+ * reginfo.c - register dump of HW-configuratin register for PPC4xx based board
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/ppc4xx-uic.h>
+#include <ppc4xx_enet.h>
+
+enum REGISTER_TYPE {
+ IDCR1, /* Indirectly Accessed DCR via SDRAM0_CFGADDR/SDRAM0_CFGDATA */
+ IDCR2, /* Indirectly Accessed DCR via EBC0_CFGADDR/EBC0_CFGDATA */
+ IDCR3, /* Indirectly Accessed DCR via EBM0_CFGADDR/EBM0_CFGDATA */
+ IDCR4, /* Indirectly Accessed DCR via PPM0_CFGADDR/PPM0_CFGDATA */
+ IDCR5, /* Indirectly Accessed DCR via CPR0_CFGADDR/CPR0_CFGDATA */
+ IDCR6, /* Indirectly Accessed DCR via SDR0_CFGADDR/SDR0_CFGDATA */
+ MM /* Directly Accessed MMIO Register */
+};
+
+struct cpu_register {
+ char *name;
+ enum REGISTER_TYPE type;
+ u32 address;
+};
+
+/*
+ * PPC440EPx registers ordered for output
+ * name type addr size
+ * -------------------------------------------
+ */
+
+const struct cpu_register ppc4xx_reg[] = {
+ {"PB0CR", IDCR2, PB0CR},
+ {"PB0AP", IDCR2, PB0AP},
+ {"PB1CR", IDCR2, PB1CR},
+ {"PB1AP", IDCR2, PB1AP},
+ {"PB2CR", IDCR2, PB2CR},
+ {"PB2AP", IDCR2, PB2AP},
+ {"PB3CR", IDCR2, PB3CR},
+ {"PB3AP", IDCR2, PB3AP},
+
+ {"PB4CR", IDCR2, PB4CR},
+ {"PB4AP", IDCR2, PB4AP},
+#if !defined(CONFIG_405EP)
+ {"PB5CR", IDCR2, PB5CR},
+ {"PB5AP", IDCR2, PB5AP},
+ {"PB6CR", IDCR2, PB6CR},
+ {"PB6AP", IDCR2, PB6AP},
+ {"PB7CR", IDCR2, PB7CR},
+ {"PB7AP", IDCR2, PB7AP},
+#endif
+
+ {"PBEAR", IDCR2, PBEAR},
+#if defined(CONFIG_405EP) || defined (CONFIG_405GP)
+ {"PBESR0", IDCR2, PBESR0},
+ {"PBESR1", IDCR2, PBESR1},
+#endif
+ {"EBC0_CFG", IDCR2, EBC0_CFG},
+
+#ifdef CONFIG_405GP
+ {"SDRAM0_BESR0", IDCR1, SDRAM0_BESR0},
+ {"SDRAM0_BESRS0", IDCR1, SDRAM0_BESRS0},
+ {"SDRAM0_BESR1", IDCR1, SDRAM0_BESR1},
+ {"SDRAM0_BESRS1", IDCR1, SDRAM0_BESRS1},
+ {"SDRAM0_BEAR", IDCR1, SDRAM0_BEAR},
+ {"SDRAM0_CFG", IDCR1, SDRAM0_CFG},
+ {"SDRAM0_RTR", IDCR1, SDRAM0_RTR},
+ {"SDRAM0_PMIT", IDCR1, SDRAM0_PMIT},
+
+ {"SDRAM0_B0CR", IDCR1, SDRAM0_B0CR},
+ {"SDRAM0_B1CR", IDCR1, SDRAM0_B1CR},
+ {"SDRAM0_B2CR", IDCR1, SDRAM0_B2CR},
+ {"SDRAM0_B3CR", IDCR1, SDRAM0_B1CR},
+ {"SDRAM0_TR", IDCR1, SDRAM0_TR},
+ {"SDRAM0_ECCCFG", IDCR1, SDRAM0_B1CR},
+ {"SDRAM0_ECCESR", IDCR1, SDRAM0_ECCESR},
+
+
+#endif
+
+#ifdef CONFIG_440EPX
+ {"SDR0_SDSTP0", IDCR6, SDR0_SDSTP0},
+ {"SDR0_SDSTP1", IDCR6, SDR0_SDSTP1},
+ {"SDR0_SDSTP2", IDCR6, SDR0_SDSTP2},
+ {"SDR0_SDSTP3", IDCR6, SDR0_SDSTP3},
+ {"SDR0_CUST0", IDCR6, SDR0_CUST0},
+ {"SDR0_CUST1", IDCR6, SDR0_CUST1},
+ {"SDR0_EBC0", IDCR6, SDR0_EBC0},
+ {"SDR0_AMP0", IDCR6, SD0_AMP0},
+ {"SDR0_AMP1", IDCR6, SD0_AMP1},
+ {"SDR0_CP440", IDCR6, SDR0_CP440},
+ {"SDR0_CRYP0", IDCR6, SDR0_CRYP0},
+ {"SDR0_DDRCFG", IDCR6, SDR0_DDRCFG},
+ {"SDR0_EMAC0RXST", IDCR6, SDR0_EMAC0RXST},
+ {"SDR0_EMAC0TXST", IDCR6, SDR0_EMAC0TXST},
+ {"SDR0_MFR", IDCR6, SDR0_MFR},
+ {"SDR0_PCI0", IDCR6, SDR0_PCI0},
+ {"SDR0_PFC0", IDCR6, SDR0_PFC0},
+ {"SDR0_PFC1", IDCR6, SDR0_PFC1},
+ {"SDR0_PFC2", IDCR6, SDR0_PFC2},
+ {"SDR0_PFC4", IDCR6, SDR0_PFC4},
+ {"SDR0_UART0", IDCR6, SDR0_UART0},
+ {"SDR0_UART1", IDCR6, SDR0_UART1},
+ {"SDR0_UART2", IDCR6, SDR0_UART2},
+ {"SDR0_UART3", IDCR6, SDR0_UART3},
+ {"DDR0_02", IDCR1, DDR0_02},
+ {"DDR0_00", IDCR1, DDR0_00},
+ {"DDR0_01", IDCR1, DDR0_01},
+ {"DDR0_03", IDCR1, DDR0_03},
+ {"DDR0_04", IDCR1, DDR0_04},
+ {"DDR0_05", IDCR1, DDR0_05},
+ {"DDR0_06", IDCR1, DDR0_06},
+ {"DDR0_07", IDCR1, DDR0_07},
+ {"DDR0_08", IDCR1, DDR0_08},
+ {"DDR0_09", IDCR1, DDR0_09},
+ {"DDR0_10", IDCR1, DDR0_10},
+ {"DDR0_11", IDCR1, DDR0_11},
+ {"DDR0_12", IDCR1, DDR0_12},
+ {"DDR0_14", IDCR1, DDR0_14},
+ {"DDR0_17", IDCR1, DDR0_17},
+ {"DDR0_18", IDCR1, DDR0_18},
+ {"DDR0_19", IDCR1, DDR0_19},
+ {"DDR0_20", IDCR1, DDR0_20},
+ {"DDR0_21", IDCR1, DDR0_21},
+ {"DDR0_22", IDCR1, DDR0_22},
+ {"DDR0_23", IDCR1, DDR0_23},
+ {"DDR0_24", IDCR1, DDR0_24},
+ {"DDR0_25", IDCR1, DDR0_25},
+ {"DDR0_26", IDCR1, DDR0_26},
+ {"DDR0_27", IDCR1, DDR0_27},
+ {"DDR0_28", IDCR1, DDR0_28},
+ {"DDR0_31", IDCR1, DDR0_31},
+ {"DDR0_32", IDCR1, DDR0_32},
+ {"DDR0_33", IDCR1, DDR0_33},
+ {"DDR0_34", IDCR1, DDR0_34},
+ {"DDR0_35", IDCR1, DDR0_35},
+ {"DDR0_36", IDCR1, DDR0_36},
+ {"DDR0_37", IDCR1, DDR0_37},
+ {"DDR0_38", IDCR1, DDR0_38},
+ {"DDR0_39", IDCR1, DDR0_39},
+ {"DDR0_40", IDCR1, DDR0_40},
+ {"DDR0_41", IDCR1, DDR0_41},
+ {"DDR0_42", IDCR1, DDR0_42},
+ {"DDR0_43", IDCR1, DDR0_43},
+ {"DDR0_44", IDCR1, DDR0_44},
+ {"CPR0_ICFG", IDCR5, CPR0_ICFG},
+ {"CPR0_MALD", IDCR5, CPR0_MALD},
+ {"CPR0_OPBD00", IDCR5, CPR0_OPBD0},
+ {"CPR0_PERD0", IDCR5, CPR0_PERD},
+ {"CPR0_PLLC0", IDCR5, CPR0_PLLC},
+ {"CPR0_PLLD0", IDCR5, CPR0_PLLD},
+ {"CPR0_PRIMAD0", IDCR5, CPR0_PRIMAD0},
+ {"CPR0_PRIMBD0", IDCR5, CPR0_PRIMBD0},
+ {"CPR0_SPCID", IDCR5, CPR0_SPCID},
+ {"SPI0_MODE", MM, SPI0_MODE},
+ {"IIC0_CLKDIV", MM, PCIL0_PMM1MA},
+ {"PCIL0_PMM0MA", MM, PCIL0_PMM0MA},
+ {"PCIL0_PMM1MA", MM, PCIL0_PMM1MA},
+ {"PCIL0_PTM1LA", MM, PCIL0_PMM1MA},
+ {"PCIL0_PTM1MS", MM, PCIL0_PTM1MS},
+ {"PCIL0_PTM2LA", MM, PCIL0_PMM1MA},
+ {"PCIL0_PTM2MS", MM, PCIL0_PTM2MS},
+ {"ZMII0_FER", MM, ZMII0_FER},
+ {"ZMII0_SSR", MM, ZMII0_SSR},
+ {"EMAC0_IPGVR", MM, EMAC0_IPGVR},
+ {"EMAC0_MR1", MM, EMAC0_MR1},
+ {"EMAC0_PTR", MM, EMAC0_PTR},
+ {"EMAC0_RWMR", MM, EMAC0_RWMR},
+ {"EMAC0_STACR", MM, EMAC0_STACR},
+ {"EMAC0_TMR0", MM, EMAC0_TMR0},
+ {"EMAC0_TMR1", MM, EMAC0_TMR1},
+ {"EMAC0_TRTR", MM, EMAC0_TRTR},
+ {"EMAC1_MR1", MM, EMAC1_MR1},
+ {"GPIO0_OR", MM, GPIO0_OR},
+ {"GPIO1_OR", MM, GPIO1_OR},
+ {"GPIO0_TCR", MM, GPIO0_TCR},
+ {"GPIO1_TCR", MM, GPIO1_TCR},
+ {"GPIO0_ODR", MM, GPIO0_ODR},
+ {"GPIO1_ODR", MM, GPIO1_ODR},
+ {"GPIO0_OSRL", MM, GPIO0_OSRL},
+ {"GPIO0_OSRH", MM, GPIO0_OSRH},
+ {"GPIO1_OSRL", MM, GPIO1_OSRL},
+ {"GPIO1_OSRH", MM, GPIO1_OSRH},
+ {"GPIO0_TSRL", MM, GPIO0_TSRL},
+ {"GPIO0_TSRH", MM, GPIO0_TSRH},
+ {"GPIO1_TSRL", MM, GPIO1_TSRL},
+ {"GPIO1_TSRH", MM, GPIO1_TSRH},
+ {"GPIO0_IR", MM, GPIO0_IR},
+ {"GPIO1_IR", MM, GPIO1_IR},
+ {"GPIO0_ISR1L", MM, GPIO0_ISR1L},
+ {"GPIO0_ISR1H", MM, GPIO0_ISR1H},
+ {"GPIO1_ISR1L", MM, GPIO1_ISR1L},
+ {"GPIO1_ISR1H", MM, GPIO1_ISR1H},
+ {"GPIO0_ISR2L", MM, GPIO0_ISR2L},
+ {"GPIO0_ISR2H", MM, GPIO0_ISR2H},
+ {"GPIO1_ISR2L", MM, GPIO1_ISR2L},
+ {"GPIO1_ISR2H", MM, GPIO1_ISR2H},
+ {"GPIO0_ISR3L", MM, GPIO0_ISR3L},
+ {"GPIO0_ISR3H", MM, GPIO0_ISR3H},
+ {"GPIO1_ISR3L", MM, GPIO1_ISR3L},
+ {"GPIO1_ISR3H", MM, GPIO1_ISR3H},
+ {"SDR0_USB2PHY0CR", IDCR6, SDR0_USB2PHY0CR},
+ {"SDR0_USB2H0CR", IDCR6, SDR0_USB2H0CR},
+ {"SDR0_USB2D0CR", IDCR6, SDR0_USB2D0CR},
+#endif
+};
+
+/*
+ * CPU Register dump of PPC4xx HW configuration registers
+ * Output: first all DCR-registers, then in order of struct ppc4xx_reg
+ */
+#define PRINT_DCR(dcr) printf("0x%08x %-16s: 0x%08x\n", dcr,#dcr, mfdcr(dcr));
+
+void ppc4xx_reginfo(void)
+{
+ unsigned int i;
+ unsigned int n;
+ u32 value;
+ enum REGISTER_TYPE type;
+#if defined (CONFIG_405EP)
+ printf("Dump PPC405EP HW configuration registers\n\n");
+#elif CONFIG_405GP
+ printf ("Dump 405GP HW configuration registers\n\n");
+#elif CONFIG_440EPX
+ printf("Dump PPC440EPx HW configuration registers\n\n");
+#endif
+ printf("MSR: 0x%08x\n", mfmsr());
+
+ printf ("\nUniversal Interrupt Controller Regs\n");
+ PRINT_DCR(UIC0SR);
+ PRINT_DCR(UIC0ER);
+ PRINT_DCR(UIC0CR);
+ PRINT_DCR(UIC0PR);
+ PRINT_DCR(UIC0TR);
+ PRINT_DCR(UIC0MSR);
+ PRINT_DCR(UIC0VR);
+ PRINT_DCR(UIC0VCR);
+
+#if (UIC_MAX > 1)
+ PRINT_DCR(UIC2SR);
+ PRINT_DCR(UIC2ER);
+ PRINT_DCR(UIC2CR);
+ PRINT_DCR(UIC2PR);
+ PRINT_DCR(UIC2TR);
+ PRINT_DCR(UIC2MSR);
+ PRINT_DCR(UIC2VR);
+ PRINT_DCR(UIC2VCR);
+#endif
+
+#if (UIC_MAX > 2)
+ PRINT_DCR(UIC2SR);
+ PRINT_DCR(UIC2ER);
+ PRINT_DCR(UIC2CR);
+ PRINT_DCR(UIC2PR);
+ PRINT_DCR(UIC2TR);
+ PRINT_DCR(UIC2MSR);
+ PRINT_DCR(UIC2VR);
+ PRINT_DCR(UIC2VCR);
+#endif
+
+#if (UIC_MAX > 3)
+ PRINT_DCR(UIC3SR);
+ PRINT_DCR(UIC3ER);
+ PRINT_DCR(UIC3CR);
+ PRINT_DCR(UIC3PR);
+ PRINT_DCR(UIC3TR);
+ PRINT_DCR(UIC3MSR);
+ PRINT_DCR(UIC3VR);
+ PRINT_DCR(UIC3VCR);
+#endif
+
+#if defined (CONFIG_405EP) || defined (CONFIG_405GP)
+ printf ("\n\nDMA Channels\n");
+ PRINT_DCR(DMASR);
+ PRINT_DCR(DMASGC);
+ PRINT_DCR(DMAADR);
+
+ PRINT_DCR(DMACR0);
+ PRINT_DCR(DMACT0);
+ PRINT_DCR(DMADA0);
+ PRINT_DCR(DMASA0);
+ PRINT_DCR(DMASB0);
+
+ PRINT_DCR(DMACR1);
+ PRINT_DCR(DMACT1);
+ PRINT_DCR(DMADA1);
+ PRINT_DCR(DMASA1);
+ PRINT_DCR(DMASB1);
+
+ PRINT_DCR(DMACR2);
+ PRINT_DCR(DMACT2);
+ PRINT_DCR(DMADA2);
+ PRINT_DCR(DMASA2);
+ PRINT_DCR(DMASB2);
+
+ PRINT_DCR(DMACR3);
+ PRINT_DCR(DMACT3);
+ PRINT_DCR(DMADA3);
+ PRINT_DCR(DMASA3);
+ PRINT_DCR(DMASB3);
+#endif
+
+ printf ("\n\nVarious HW-Configuration registers\n");
+#if defined (CONFIG_440EPX)
+ PRINT_DCR(MAL0_CFG);
+ PRINT_DCR(CPM0_ER);
+ PRINT_DCR(CPM1_ER);
+ PRINT_DCR(PLB4A0_ACR);
+ PRINT_DCR(PLB4A1_ACR);
+ PRINT_DCR(PLB3A0_ACR);
+ PRINT_DCR(OPB2PLB40_BCTRL);
+ PRINT_DCR(P4P3BO0_CFG);
+#endif
+ n = sizeof(ppc4xx_reg) / sizeof(ppc4xx_reg[0]);
+ for (i = 0; i < n; i++) {
+ value = 0;
+ type = ppc4xx_reg[i].type;
+ switch (type) {
+ case IDCR1: /* Indirect via SDRAM0_CFGADDR/DDR0_CFGDATA */
+ mtdcr(SDRAM0_CFGADDR, ppc4xx_reg[i].address);
+ value = mfdcr(SDRAM0_CFGDATA);
+ break;
+ case IDCR2: /* Indirect via EBC0_CFGADDR/EBC0_CFGDATA */
+ mtdcr(EBC0_CFGADDR, ppc4xx_reg[i].address);
+ value = mfdcr(EBC0_CFGDATA);
+ break;
+ case IDCR5: /* Indirect via CPR0_CFGADDR/CPR0_CFGDATA */
+ mtdcr(CPR0_CFGADDR, ppc4xx_reg[i].address);
+ value = mfdcr(CPR0_CFGDATA);
+ break;
+ case IDCR6: /* Indirect via SDR0_CFGADDR/SDR0_CFGDATA */
+ mtdcr(SDR0_CFGADDR, ppc4xx_reg[i].address);
+ value = mfdcr(SDR0_CFGDATA);
+ break;
+ case MM: /* Directly Accessed MMIO Register */
+ value = in_be32((const volatile unsigned __iomem *)
+ ppc4xx_reg[i].address);
+ break;
+ default:
+ printf("\nERROR: struct entry %d: unknown register"
+ "type\n", i);
+ break;
+ }
+ printf("0x%08x %-16s: 0x%08x\n",ppc4xx_reg[i].address,
+ ppc4xx_reg[i].name, value);
+ }
+}
diff --git a/arch/ppc/cpu/ppc4xx/resetvec.S b/arch/ppc/cpu/ppc4xx/resetvec.S
new file mode 100644
index 0000000..b3308bd
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/resetvec.S
@@ -0,0 +1,12 @@
+/* Copyright MontaVista Software Incorporated, 2000 */
+#include <config.h>
+ .section .resetvec,"ax"
+#if defined(CONFIG_440)
+ b _start_440
+#else
+#if defined(CONFIG_BOOT_PCI) && defined(CONFIG_MIP405)
+ b _start_pci
+#else
+ b _start
+#endif
+#endif
diff --git a/arch/ppc/cpu/ppc4xx/sdram.c b/arch/ppc/cpu/ppc4xx/sdram.c
new file mode 100644
index 0000000..30c6e0e
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/sdram.c
@@ -0,0 +1,468 @@
+/*
+ * (C) Copyright 2005-2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2006
+ * DAVE Srl <www.dave-tech.it>
+ *
+ * (C) Copyright 2002-2004
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+#include "sdram.h"
+#include "ecc.h"
+
+#ifdef CONFIG_SDRAM_BANK0
+
+#ifndef CONFIG_440
+
+#ifndef CONFIG_SYS_SDRAM_TABLE
+sdram_conf_t mb0cf[] = {
+ {(128 << 20), 13, 0x000A4001}, /* (0-128MB) Address Mode 3, 13x10(4) */
+ {(64 << 20), 13, 0x00084001}, /* (0-64MB) Address Mode 3, 13x9(4) */
+ {(32 << 20), 12, 0x00062001}, /* (0-32MB) Address Mode 2, 12x9(4) */
+ {(16 << 20), 12, 0x00046001}, /* (0-16MB) Address Mode 4, 12x8(4) */
+ {(4 << 20), 11, 0x00008001}, /* (0-4MB) Address Mode 5, 11x8(2) */
+};
+#else
+sdram_conf_t mb0cf[] = CONFIG_SYS_SDRAM_TABLE;
+#endif
+
+#define N_MB0CF (sizeof(mb0cf) / sizeof(mb0cf[0]))
+
+#ifdef CONFIG_SYS_SDRAM_CASL
+static ulong ns2clks(ulong ns)
+{
+ ulong bus_period_x_10 = ONE_BILLION / (get_bus_freq(0) / 10);
+
+ return ((ns * 10) + bus_period_x_10) / bus_period_x_10;
+}
+#endif /* CONFIG_SYS_SDRAM_CASL */
+
+static ulong compute_sdtr1(ulong speed)
+{
+#ifdef CONFIG_SYS_SDRAM_CASL
+ ulong tmp;
+ ulong sdtr1 = 0;
+
+ /* CASL */
+ if (CONFIG_SYS_SDRAM_CASL < 2)
+ sdtr1 |= (1 << SDRAM0_TR_CASL);
+ else
+ if (CONFIG_SYS_SDRAM_CASL > 4)
+ sdtr1 |= (3 << SDRAM0_TR_CASL);
+ else
+ sdtr1 |= ((CONFIG_SYS_SDRAM_CASL-1) << SDRAM0_TR_CASL);
+
+ /* PTA */
+ tmp = ns2clks(CONFIG_SYS_SDRAM_PTA);
+ if ((tmp >= 2) && (tmp <= 4))
+ sdtr1 |= ((tmp-1) << SDRAM0_TR_PTA);
+ else
+ sdtr1 |= ((4-1) << SDRAM0_TR_PTA);
+
+ /* CTP */
+ tmp = ns2clks(CONFIG_SYS_SDRAM_CTP);
+ if ((tmp >= 2) && (tmp <= 4))
+ sdtr1 |= ((tmp-1) << SDRAM0_TR_CTP);
+ else
+ sdtr1 |= ((4-1) << SDRAM0_TR_CTP);
+
+ /* LDF */
+ tmp = ns2clks(CONFIG_SYS_SDRAM_LDF);
+ if ((tmp >= 2) && (tmp <= 4))
+ sdtr1 |= ((tmp-1) << SDRAM0_TR_LDF);
+ else
+ sdtr1 |= ((2-1) << SDRAM0_TR_LDF);
+
+ /* RFTA */
+ tmp = ns2clks(CONFIG_SYS_SDRAM_RFTA);
+ if ((tmp >= 4) && (tmp <= 10))
+ sdtr1 |= ((tmp-4) << SDRAM0_TR_RFTA);
+ else
+ sdtr1 |= ((10-4) << SDRAM0_TR_RFTA);
+
+ /* RCD */
+ tmp = ns2clks(CONFIG_SYS_SDRAM_RCD);
+ if ((tmp >= 2) && (tmp <= 4))
+ sdtr1 |= ((tmp-1) << SDRAM0_TR_RCD);
+ else
+ sdtr1 |= ((4-1) << SDRAM0_TR_RCD);
+
+ return sdtr1;
+#else /* CONFIG_SYS_SDRAM_CASL */
+ /*
+ * If no values are configured in the board config file
+ * use the default values, which seem to be ok for most
+ * boards.
+ *
+ * REMARK:
+ * For new board ports we strongly recommend to define the
+ * correct values for the used SDRAM chips in your board
+ * config file (see PPChameleonEVB.h)
+ */
+ if (speed > 100000000) {
+ /*
+ * 133 MHz SDRAM
+ */
+ return 0x01074015;
+ } else {
+ /*
+ * default: 100 MHz SDRAM
+ */
+ return 0x0086400d;
+ }
+#endif /* CONFIG_SYS_SDRAM_CASL */
+}
+
+/* refresh is expressed in ms */
+static ulong compute_rtr(ulong speed, ulong rows, ulong refresh)
+{
+#ifdef CONFIG_SYS_SDRAM_CASL
+ ulong tmp;
+
+ tmp = ((refresh*1000*1000) / (1 << rows)) * (speed / 1000);
+ tmp /= 1000000;
+
+ return ((tmp & 0x00003FF8) << 16);
+#else /* CONFIG_SYS_SDRAM_CASL */
+ if (speed > 100000000) {
+ /*
+ * 133 MHz SDRAM
+ */
+ return 0x07f00000;
+ } else {
+ /*
+ * default: 100 MHz SDRAM
+ */
+ return 0x05f00000;
+ }
+#endif /* CONFIG_SYS_SDRAM_CASL */
+}
+
+/*
+ * Autodetect onboard SDRAM on 405 platforms
+ */
+phys_size_t initdram(int board_type)
+{
+ ulong speed;
+ ulong sdtr1;
+ int i;
+
+ /*
+ * Determine SDRAM speed
+ */
+ speed = get_bus_freq(0); /* parameter not used on ppc4xx */
+
+ /*
+ * sdtr1 (register SDRAM0_TR) must take into account timings listed
+ * in SDRAM chip datasheet. rtr (register SDRAM0_RTR) must take into
+ * account actual SDRAM size. So we can set up sdtr1 according to what
+ * is specified in board configuration file while rtr dependds on SDRAM
+ * size we are assuming before detection.
+ */
+ sdtr1 = compute_sdtr1(speed);
+
+ for (i=0; i<N_MB0CF; i++) {
+ /*
+ * Disable memory controller.
+ */
+ mtsdram(SDRAM0_CFG, 0x00000000);
+
+ /*
+ * Set MB0CF for bank 0.
+ */
+ mtsdram(SDRAM0_B0CR, mb0cf[i].reg);
+ mtsdram(SDRAM0_TR, sdtr1);
+ mtsdram(SDRAM0_RTR, compute_rtr(speed, mb0cf[i].rows, 64));
+
+ udelay(200);
+
+ /*
+ * Set memory controller options reg, MCOPT1.
+ * Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst
+ * read/prefetch.
+ */
+ mtsdram(SDRAM0_CFG, 0x80800000);
+
+ udelay(10000);
+
+ if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) {
+ phys_size_t size = mb0cf[i].size;
+
+ /*
+ * OK, size detected. Enable second bank if
+ * defined (assumes same type as bank 0)
+ */
+#ifdef CONFIG_SDRAM_BANK1
+ mtsdram(SDRAM0_CFG, 0x00000000);
+ mtsdram(SDRAM0_B1CR, mb0cf[i].size | mb0cf[i].reg);
+ mtsdram(SDRAM0_CFG, 0x80800000);
+ udelay(10000);
+
+ /*
+ * Check if 2nd bank is really available.
+ * If the size not equal to the size of the first
+ * bank, then disable the 2nd bank completely.
+ */
+ if (get_ram_size((long *)mb0cf[i].size, mb0cf[i].size) !=
+ mb0cf[i].size) {
+ mtsdram(SDRAM0_B1CR, 0);
+ mtsdram(SDRAM0_CFG, 0);
+ } else {
+ /*
+ * We have two identical banks, so the size
+ * is twice the bank size
+ */
+ size = 2 * size;
+ }
+#endif
+
+ /*
+ * OK, size detected -> all done
+ */
+ return size;
+ }
+ }
+
+ return 0;
+}
+
+#else /* CONFIG_440 */
+
+/*
+ * Define some default values. Those can be overwritten in the
+ * board config file.
+ */
+
+#ifndef CONFIG_SYS_SDRAM_TABLE
+sdram_conf_t mb0cf[] = {
+ {(256 << 20), 13, 0x000C4001}, /* 256MB mode 3, 13x10(4) */
+ {(128 << 20), 13, 0x000A4001}, /* 128MB mode 3, 13x10(4) */
+ {(64 << 20), 12, 0x00082001} /* 64MB mode 2, 12x9(4) */
+};
+#else
+sdram_conf_t mb0cf[] = CONFIG_SYS_SDRAM_TABLE;
+#endif
+
+#ifndef CONFIG_SYS_SDRAM0_TR0
+#define CONFIG_SYS_SDRAM0_TR0 0x41094012
+#endif
+
+#ifndef CONFIG_SYS_SDRAM0_WDDCTR
+#define CONFIG_SYS_SDRAM0_WDDCTR 0x00000000 /* wrcp=0 dcd=0 */
+#endif
+
+#ifndef CONFIG_SYS_SDRAM0_RTR
+#define CONFIG_SYS_SDRAM0_RTR 0x04100000 /* 7.8us @ 133MHz PLB */
+#endif
+
+#ifndef CONFIG_SYS_SDRAM0_CFG0
+#define CONFIG_SYS_SDRAM0_CFG0 0x82000000 /* DCEN=1, PMUD=0, 64-bit */
+#endif
+
+#define N_MB0CF (sizeof(mb0cf) / sizeof(mb0cf[0]))
+
+#define NUM_TRIES 64
+#define NUM_READS 10
+
+static void sdram_tr1_set(int ram_address, int* tr1_value)
+{
+ int i;
+ int j, k;
+ volatile unsigned int* ram_pointer = (unsigned int *)ram_address;
+ int first_good = -1, last_bad = 0x1ff;
+
+ unsigned long test[NUM_TRIES] = {
+ 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+ 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
+
+ /* go through all possible SDRAM0_TR1[RDCT] values */
+ for (i=0; i<=0x1ff; i++) {
+ /* set the current value for TR1 */
+ mtsdram(SDRAM0_TR1, (0x80800800 | i));
+
+ /* write values */
+ for (j=0; j<NUM_TRIES; j++) {
+ ram_pointer[j] = test[j];
+
+ /* clear any cache at ram location */
+ __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
+ }
+
+ /* read values back */
+ for (j=0; j<NUM_TRIES; j++) {
+ for (k=0; k<NUM_READS; k++) {
+ /* clear any cache at ram location */
+ __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
+
+ if (ram_pointer[j] != test[j])
+ break;
+ }
+
+ /* read error */
+ if (k != NUM_READS)
+ break;
+ }
+
+ /* we have a SDRAM0_TR1[RDCT] that is part of the window */
+ if (j == NUM_TRIES) {
+ if (first_good == -1)
+ first_good = i; /* found beginning of window */
+ } else { /* bad read */
+ /* if we have not had a good read then don't care */
+ if (first_good != -1) {
+ /* first failure after a good read */
+ last_bad = i-1;
+ break;
+ }
+ }
+ }
+
+ /* return the current value for TR1 */
+ *tr1_value = (first_good + last_bad) / 2;
+}
+
+/*
+ * Autodetect onboard DDR SDRAM on 440 platforms
+ *
+ * NOTE: Some of the hardcoded values are hardware dependant,
+ * so this should be extended for other future boards
+ * using this routine!
+ */
+phys_size_t initdram(int board_type)
+{
+ int i;
+ int tr1_bank1;
+
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440SP)
+ /*
+ * Soft-reset SDRAM controller.
+ */
+ mtsdr(SDR0_SRST, SDR0_SRST_DMC);
+ mtsdr(SDR0_SRST, 0x00000000);
+#endif
+
+ for (i=0; i<N_MB0CF; i++) {
+ /*
+ * Disable memory controller.
+ */
+ mtsdram(SDRAM0_CFG0, 0x00000000);
+
+ /*
+ * Setup some default
+ */
+ mtsdram(SDRAM0_UABBA, 0x00000000); /* ubba=0 (default) */
+ mtsdram(SDRAM0_SLIO, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
+ mtsdram(SDRAM0_DEVOPT, 0x00000000); /* dll=0 ds=0 (normal) */
+ mtsdram(SDRAM0_WDDCTR, CONFIG_SYS_SDRAM0_WDDCTR);
+ mtsdram(SDRAM0_CLKTR, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
+
+ /*
+ * Following for CAS Latency = 2.5 @ 133 MHz PLB
+ */
+ mtsdram(SDRAM0_B0CR, mb0cf[i].reg);
+ mtsdram(SDRAM0_TR0, CONFIG_SYS_SDRAM0_TR0);
+ mtsdram(SDRAM0_TR1, 0x80800800); /* SS=T2 SL=STAGE 3 CD=1 CT=0x00*/
+ mtsdram(SDRAM0_RTR, CONFIG_SYS_SDRAM0_RTR);
+ mtsdram(SDRAM0_CFG1, 0x00000000); /* Self-refresh exit, disable PM*/
+ udelay(400); /* Delay 200 usecs (min) */
+
+ /*
+ * Enable the controller, then wait for DCEN to complete
+ */
+ mtsdram(SDRAM0_CFG0, CONFIG_SYS_SDRAM0_CFG0);
+ udelay(10000);
+
+ if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) {
+ phys_size_t size = mb0cf[i].size;
+ /*
+ * Optimize TR1 to current hardware environment
+ */
+ sdram_tr1_set(0x00000000, &tr1_bank1);
+ mtsdram(SDRAM0_TR1, (tr1_bank1 | 0x80800800));
+
+
+ /*
+ * OK, size detected. Enable second bank if
+ * defined (assumes same type as bank 0)
+ */
+#ifdef CONFIG_SDRAM_BANK1
+ mtsdram(SDRAM0_CFG0, 0);
+ mtsdram(SDRAM0_B1CR, mb0cf[i].size | mb0cf[i].reg);
+ mtsdram(SDRAM0_CFG0, CONFIG_SYS_SDRAM0_CFG0);
+ udelay(10000);
+
+ /*
+ * Check if 2nd bank is really available.
+ * If the size not equal to the size of the first
+ * bank, then disable the 2nd bank completely.
+ */
+ if (get_ram_size((long *)mb0cf[i].size, mb0cf[i].size)
+ != mb0cf[i].size) {
+ mtsdram(SDRAM0_CFG0, 0);
+ mtsdram(SDRAM0_B1CR, 0);
+ mtsdram(SDRAM0_CFG0, CONFIG_SYS_SDRAM0_CFG0);
+ udelay(10000);
+ } else {
+ /*
+ * We have two identical banks, so the size
+ * is twice the bank size
+ */
+ size = 2 * size;
+ }
+#endif
+
+#ifdef CONFIG_SDRAM_ECC
+ ecc_init(0, size);
+#endif
+
+ /*
+ * OK, size detected -> all done
+ */
+ return size;
+ }
+ }
+
+ return 0; /* nothing found ! */
+}
+
+#endif /* CONFIG_440 */
+
+#endif /* CONFIG_SDRAM_BANK0 */
diff --git a/arch/ppc/cpu/ppc4xx/sdram.h b/arch/ppc/cpu/ppc4xx/sdram.h
new file mode 100644
index 0000000..bea3376
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/sdram.h
@@ -0,0 +1,76 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2006
+ * DAVE Srl <www.dave-tech.it>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _SDRAM_H_
+#define _SDRAM_H_
+
+#include <config.h>
+
+#define ONE_BILLION 1000000000
+
+struct sdram_conf_s {
+ unsigned long size;
+ int rows;
+ unsigned long reg;
+};
+
+typedef struct sdram_conf_s sdram_conf_t;
+
+/* Bitfields offsets */
+#define SDRAM0_TR_CASL (31 - 8)
+#define SDRAM0_TR_PTA (31 - 13)
+#define SDRAM0_TR_CTP (31 - 15)
+#define SDRAM0_TR_LDF (31 - 17)
+#define SDRAM0_TR_RFTA (31 - 29)
+#define SDRAM0_TR_RCD (31 - 31)
+
+#ifdef CONFIG_SYS_SDRAM_CL
+/* SDRAM timings [ns] according to AMCC/IBM names (see SDRAM_faq.doc) */
+#define CONFIG_SYS_SDRAM_CASL CONFIG_SYS_SDRAM_CL
+#define CONFIG_SYS_SDRAM_PTA CONFIG_SYS_SDRAM_tRP
+#define CONFIG_SYS_SDRAM_CTP (CONFIG_SYS_SDRAM_tRC - CONFIG_SYS_SDRAM_tRCD - CONFIG_SYS_SDRAM_tRP)
+#define CONFIG_SYS_SDRAM_LDF 0
+#ifdef CONFIG_SYS_SDRAM_tRFC
+#define CONFIG_SYS_SDRAM_RFTA CONFIG_SYS_SDRAM_tRFC
+#else
+#define CONFIG_SYS_SDRAM_RFTA CONFIG_SYS_SDRAM_tRC
+#endif
+#define CONFIG_SYS_SDRAM_RCD CONFIG_SYS_SDRAM_tRCD
+#endif /* #ifdef CONFIG_SYS_SDRAM_CL */
+
+/*
+ * Some defines for the 440 DDR controller
+ */
+#define SDRAM_CFG0_DC_EN 0x80000000 /* SDRAM Controller Enable */
+#define SDRAM_CFG0_MEMCHK 0x30000000 /* Memory data error checking mask*/
+#define SDRAM_CFG0_MEMCHK_NON 0x00000000 /* No ECC generation */
+#define SDRAM_CFG0_MEMCHK_GEN 0x20000000 /* ECC generation */
+#define SDRAM_CFG0_MEMCHK_CHK 0x30000000 /* ECC generation and checking */
+#define SDRAM_CFG0_DRAMWDTH 0x02000000 /* DRAM width mask */
+#define SDRAM_CFG0_DRAMWDTH_32 0x00000000 /* 32 bits */
+#define SDRAM_CFG0_DRAMWDTH_64 0x02000000 /* 64 bits */
+
+#endif
diff --git a/arch/ppc/cpu/ppc4xx/speed.c b/arch/ppc/cpu/ppc4xx/speed.c
new file mode 100644
index 0000000..906face
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/speed.c
@@ -0,0 +1,1177 @@
+/*
+ * (C) Copyright 2000-2008
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc_asm.tmpl>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define ONE_BILLION 1000000000
+#ifdef DEBUG
+#define DEBUGF(fmt,args...) printf(fmt ,##args)
+#else
+#define DEBUGF(fmt,args...)
+#endif
+
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR)
+
+void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
+{
+ unsigned long pllmr;
+ unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
+ uint pvr = get_pvr();
+ unsigned long psr;
+ unsigned long m;
+
+ /*
+ * Read PLL Mode register
+ */
+ pllmr = mfdcr (CPC0_PLLMR);
+
+ /*
+ * Read Pin Strapping register
+ */
+ psr = mfdcr (CPC0_PSR);
+
+ /*
+ * Determine FWD_DIV.
+ */
+ sysInfo->pllFwdDiv = 8 - ((pllmr & PLLMR_FWD_DIV_MASK) >> 29);
+
+ /*
+ * Determine FBK_DIV.
+ */
+ sysInfo->pllFbkDiv = ((pllmr & PLLMR_FB_DIV_MASK) >> 25);
+ if (sysInfo->pllFbkDiv == 0) {
+ sysInfo->pllFbkDiv = 16;
+ }
+
+ /*
+ * Determine PLB_DIV.
+ */
+ sysInfo->pllPlbDiv = ((pllmr & PLLMR_CPU_TO_PLB_MASK) >> 17) + 1;
+
+ /*
+ * Determine PCI_DIV.
+ */
+ sysInfo->pllPciDiv = ((pllmr & PLLMR_PCI_TO_PLB_MASK) >> 13) + 1;
+
+ /*
+ * Determine EXTBUS_DIV.
+ */
+ sysInfo->pllExtBusDiv = ((pllmr & PLLMR_EXB_TO_PLB_MASK) >> 11) + 2;
+
+ /*
+ * Determine OPB_DIV.
+ */
+ sysInfo->pllOpbDiv = ((pllmr & PLLMR_OPB_TO_PLB_MASK) >> 15) + 1;
+
+ /*
+ * Check if PPC405GPr used (mask minor revision field)
+ */
+ if ((pvr & 0xfffffff0) == (PVR_405GPR_RB & 0xfffffff0)) {
+ /*
+ * Determine FWD_DIV B (only PPC405GPr with new mode strapping).
+ */
+ sysInfo->pllFwdDivB = 8 - (pllmr & PLLMR_FWDB_DIV_MASK);
+
+ /*
+ * Determine factor m depending on PLL feedback clock source
+ */
+ if (!(psr & PSR_PCI_ASYNC_EN)) {
+ if (psr & PSR_NEW_MODE_EN) {
+ /*
+ * sync pci clock used as feedback (new mode)
+ */
+ m = 1 * sysInfo->pllFwdDivB * 2 * sysInfo->pllPciDiv;
+ } else {
+ /*
+ * sync pci clock used as feedback (legacy mode)
+ */
+ m = 1 * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv * sysInfo->pllPciDiv;
+ }
+ } else if (psr & PSR_NEW_MODE_EN) {
+ if (psr & PSR_PERCLK_SYNC_MODE_EN) {
+ /*
+ * PerClk used as feedback (new mode)
+ */
+ m = 1 * sysInfo->pllFwdDivB * 2 * sysInfo->pllExtBusDiv;
+ } else {
+ /*
+ * CPU clock used as feedback (new mode)
+ */
+ m = sysInfo->pllFbkDiv * sysInfo->pllFwdDiv;
+ }
+ } else if (sysInfo->pllExtBusDiv == sysInfo->pllFbkDiv) {
+ /*
+ * PerClk used as feedback (legacy mode)
+ */
+ m = 1 * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv * sysInfo->pllExtBusDiv;
+ } else {
+ /*
+ * PLB clock used as feedback (legacy mode)
+ */
+ m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv;
+ }
+
+ sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
+ (unsigned long long)sysClkPeriodPs;
+ sysInfo->freqProcessor = sysInfo->freqVCOHz / sysInfo->pllFwdDiv;
+ sysInfo->freqPLB = sysInfo->freqVCOHz / (sysInfo->pllFwdDivB * sysInfo->pllPlbDiv);
+ } else {
+ /*
+ * Check pllFwdDiv to see if running in bypass mode where the CPU speed
+ * is equal to the 405GP SYS_CLK_FREQ. If not in bypass mode, check VCO
+ * to make sure it is within the proper range.
+ * spec: VCO = SYS_CLOCK x FBKDIV x PLBDIV x FWDDIV
+ * Note freqVCO is calculated in MHz to avoid errors introduced by rounding.
+ */
+ if (sysInfo->pllFwdDiv == 1) {
+ sysInfo->freqProcessor = CONFIG_SYS_CLK_FREQ;
+ sysInfo->freqPLB = CONFIG_SYS_CLK_FREQ / sysInfo->pllPlbDiv;
+ } else {
+ sysInfo->freqVCOHz = ( 1000000000000LL *
+ (unsigned long long)sysInfo->pllFwdDiv *
+ (unsigned long long)sysInfo->pllFbkDiv *
+ (unsigned long long)sysInfo->pllPlbDiv
+ ) / (unsigned long long)sysClkPeriodPs;
+ sysInfo->freqPLB = (ONE_BILLION / ((sysClkPeriodPs * 10) /
+ sysInfo->pllFbkDiv)) * 10000;
+ sysInfo->freqProcessor = sysInfo->freqPLB * sysInfo->pllPlbDiv;
+ }
+ }
+
+ sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv;
+ sysInfo->freqEBC = sysInfo->freqPLB / sysInfo->pllExtBusDiv;
+ sysInfo->freqUART = sysInfo->freqProcessor;
+}
+
+
+/********************************************
+ * get_PCI_freq
+ * return PCI bus freq in Hz
+ *********************************************/
+ulong get_PCI_freq (void)
+{
+ ulong val;
+ PPC4xx_SYS_INFO sys_info;
+
+ get_sys_info (&sys_info);
+ val = sys_info.freqPLB / sys_info.pllPciDiv;
+ return val;
+}
+
+
+#elif defined(CONFIG_440)
+
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+ defined(CONFIG_460SX)
+static u8 pll_fwdv_multi_bits[] = {
+ /* values for: 1 - 16 */
+ 0x00, 0x01, 0x0f, 0x04, 0x09, 0x0a, 0x0d, 0x0e, 0x03, 0x0c,
+ 0x05, 0x08, 0x07, 0x02, 0x0b, 0x06
+};
+
+u32 get_cpr0_fwdv(unsigned long cpr_reg_fwdv)
+{
+ u32 index;
+
+ for (index = 0; index < ARRAY_SIZE(pll_fwdv_multi_bits); index++)
+ if (cpr_reg_fwdv == (u32)pll_fwdv_multi_bits[index])
+ return index + 1;
+
+ return 0;
+}
+
+static u8 pll_fbdv_multi_bits[] = {
+ /* values for: 1 - 100 */
+ 0x00, 0xff, 0x7e, 0xfd, 0x7a, 0xf5, 0x6a, 0xd5, 0x2a, 0xd4,
+ 0x29, 0xd3, 0x26, 0xcc, 0x19, 0xb3, 0x67, 0xce, 0x1d, 0xbb,
+ 0x77, 0xee, 0x5d, 0xba, 0x74, 0xe9, 0x52, 0xa5, 0x4b, 0x96,
+ 0x2c, 0xd8, 0x31, 0xe3, 0x46, 0x8d, 0x1b, 0xb7, 0x6f, 0xde,
+ 0x3d, 0xfb, 0x76, 0xed, 0x5a, 0xb5, 0x6b, 0xd6, 0x2d, 0xdb,
+ 0x36, 0xec, 0x59, 0xb2, 0x64, 0xc9, 0x12, 0xa4, 0x48, 0x91,
+ 0x23, 0xc7, 0x0e, 0x9c, 0x38, 0xf0, 0x61, 0xc2, 0x05, 0x8b,
+ 0x17, 0xaf, 0x5f, 0xbe, 0x7c, 0xf9, 0x72, 0xe5, 0x4a, 0x95,
+ 0x2b, 0xd7, 0x2e, 0xdc, 0x39, 0xf3, 0x66, 0xcd, 0x1a, 0xb4,
+ 0x68, 0xd1, 0x22, 0xc4, 0x09, 0x93, 0x27, 0xcf, 0x1e, 0xbc,
+ /* values for: 101 - 200 */
+ 0x78, 0xf1, 0x62, 0xc5, 0x0a, 0x94, 0x28, 0xd0, 0x21, 0xc3,
+ 0x06, 0x8c, 0x18, 0xb0, 0x60, 0xc1, 0x02, 0x84, 0x08, 0x90,
+ 0x20, 0xc0, 0x01, 0x83, 0x07, 0x8f, 0x1f, 0xbf, 0x7f, 0xfe,
+ 0x7d, 0xfa, 0x75, 0xea, 0x55, 0xaa, 0x54, 0xa9, 0x53, 0xa6,
+ 0x4c, 0x99, 0x33, 0xe7, 0x4e, 0x9d, 0x3b, 0xf7, 0x6e, 0xdd,
+ 0x3a, 0xf4, 0x69, 0xd2, 0x25, 0xcb, 0x16, 0xac, 0x58, 0xb1,
+ 0x63, 0xc6, 0x0d, 0x9b, 0x37, 0xef, 0x5e, 0xbd, 0x7b, 0xf6,
+ 0x6d, 0xda, 0x35, 0xeb, 0x56, 0xad, 0x5b, 0xb6, 0x6c, 0xd9,
+ 0x32, 0xe4, 0x49, 0x92, 0x24, 0xc8, 0x11, 0xa3, 0x47, 0x8e,
+ 0x1c, 0xb8, 0x70, 0xe1, 0x42, 0x85, 0x0b, 0x97, 0x2f, 0xdf,
+ /* values for: 201 - 255 */
+ 0x3e, 0xfc, 0x79, 0xf2, 0x65, 0xca, 0x15, 0xab, 0x57, 0xae,
+ 0x5c, 0xb9, 0x73, 0xe6, 0x4d, 0x9a, 0x34, 0xe8, 0x51, 0xa2,
+ 0x44, 0x89, 0x13, 0xa7, 0x4f, 0x9e, 0x3c, 0xf8, 0x71, 0xe2,
+ 0x45, 0x8a, 0x14, 0xa8, 0x50, 0xa1, 0x43, 0x86, 0x0c, 0x98,
+ 0x30, 0xe0, 0x41, 0x82, 0x04, 0x88, 0x10, 0xa0, 0x40, 0x81,
+ 0x03, 0x87, 0x0f, 0x9f, 0x3f /* END */
+};
+
+u32 get_cpr0_fbdv(unsigned long cpr_reg_fbdv)
+{
+ u32 index;
+
+ for (index = 0; index < ARRAY_SIZE(pll_fbdv_multi_bits); index++)
+ if (cpr_reg_fbdv == (u32)pll_fbdv_multi_bits[index])
+ return index + 1;
+
+ return 0;
+}
+
+/*
+ * AMCC_TODO: verify this routine against latest EAS, cause stuff changed
+ * with latest EAS
+ */
+void get_sys_info (sys_info_t * sysInfo)
+{
+ unsigned long strp0;
+ unsigned long strp1;
+ unsigned long temp;
+ unsigned long m;
+ unsigned long plbedv0;
+
+ /* Extract configured divisors */
+ mfsdr(SDR0_SDSTP0, strp0);
+ mfsdr(SDR0_SDSTP1, strp1);
+
+ temp = ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 4);
+ sysInfo->pllFwdDivA = get_cpr0_fwdv(temp);
+
+ temp = (strp0 & PLLSYS0_FWD_DIV_B_MASK);
+ sysInfo->pllFwdDivB = get_cpr0_fwdv(temp);
+
+ temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 8;
+ sysInfo->pllFbkDiv = get_cpr0_fbdv(temp);
+
+ temp = (strp1 & PLLSYS0_OPB_DIV_MASK) >> 26;
+ sysInfo->pllOpbDiv = temp ? temp : 4;
+
+ /* AMCC_TODO: verify the SDR0_SDSTP1.PERDV0 value sysInfo->pllExtBusDiv */
+ temp = (strp1 & PLLSYS0_PERCLK_DIV_MASK) >> 24;
+ sysInfo->pllExtBusDiv = temp ? temp : 4;
+
+ temp = (strp1 & PLLSYS0_PLBEDV0_DIV_MASK) >> 29;
+ plbedv0 = temp ? temp: 8;
+
+ /* Calculate 'M' based on feedback source */
+ temp = (strp0 & PLLSYS0_SEL_MASK) >> 27;
+ if (temp == 0) {
+ /* PLL internal feedback */
+ m = sysInfo->pllFbkDiv;
+ } else {
+ /* PLL PerClk feedback */
+ m = sysInfo->pllFwdDivA * plbedv0 * sysInfo->pllOpbDiv *
+ sysInfo->pllExtBusDiv;
+ }
+
+ /* Now calculate the individual clocks */
+ sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m >> 1);
+ sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
+ sysInfo->freqPLB = sysInfo->freqVCOMhz / sysInfo->pllFwdDivA / plbedv0;
+ sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv;
+ sysInfo->freqEBC = sysInfo->freqOPB / sysInfo->pllExtBusDiv;
+ sysInfo->freqDDR = sysInfo->freqPLB;
+ sysInfo->freqUART = sysInfo->freqPLB;
+
+ return;
+}
+
+#elif defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+void get_sys_info (sys_info_t *sysInfo)
+{
+ unsigned long temp;
+ unsigned long reg;
+ unsigned long lfdiv;
+ unsigned long m;
+ unsigned long prbdv0;
+ /*
+ WARNING: ASSUMES the following:
+ ENG=1
+ PRADV0=1
+ PRBDV0=1
+ */
+
+ /* Decode CPR0_PLLD0 for divisors */
+ mfcpr(CPR0_PLLD, reg);
+ temp = (reg & PLLD_FWDVA_MASK) >> 16;
+ sysInfo->pllFwdDivA = temp ? temp : 16;
+ temp = (reg & PLLD_FWDVB_MASK) >> 8;
+ sysInfo->pllFwdDivB = temp ? temp: 8 ;
+ temp = (reg & PLLD_FBDV_MASK) >> 24;
+ sysInfo->pllFbkDiv = temp ? temp : 32;
+ lfdiv = reg & PLLD_LFBDV_MASK;
+
+ mfcpr(CPR0_OPBD0, reg);
+ temp = (reg & OPBDDV_MASK) >> 24;
+ sysInfo->pllOpbDiv = temp ? temp : 4;
+
+ mfcpr(CPR0_PERD, reg);
+ temp = (reg & PERDV_MASK) >> 24;
+ sysInfo->pllExtBusDiv = temp ? temp : 8;
+
+ mfcpr(CPR0_PRIMBD0, reg);
+ temp = (reg & PRBDV_MASK) >> 24;
+ prbdv0 = temp ? temp : 8;
+
+ mfcpr(CPR0_SPCID, reg);
+ temp = (reg & SPCID_MASK) >> 24;
+ sysInfo->pllPciDiv = temp ? temp : 4;
+
+ /* Calculate 'M' based on feedback source */
+ mfsdr(SDR0_SDSTP0, reg);
+ temp = (reg & PLLSYS0_SEL_MASK) >> 27;
+ if (temp == 0) { /* PLL output */
+ /* Figure which pll to use */
+ mfcpr(CPR0_PLLC, reg);
+ temp = (reg & PLLC_SRC_MASK) >> 29;
+ if (!temp) /* PLLOUTA */
+ m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivA;
+ else /* PLLOUTB */
+ m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivB;
+ }
+ else if (temp == 1) /* CPU output */
+ m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
+ else /* PerClk */
+ m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
+
+ /* Now calculate the individual clocks */
+ sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
+ sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
+ sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
+ sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
+ sysInfo->freqEBC = sysInfo->freqPLB/sysInfo->pllExtBusDiv;
+ sysInfo->freqPCI = sysInfo->freqPLB/sysInfo->pllPciDiv;
+ sysInfo->freqUART = sysInfo->freqPLB;
+
+ /* Figure which timer source to use */
+ if (mfspr(SPRN_CCR1) & 0x0080) {
+ /* External Clock, assume same as SYS_CLK */
+ temp = sysInfo->freqProcessor / 2; /* Max extern clock speed */
+ if (CONFIG_SYS_CLK_FREQ > temp)
+ sysInfo->freqTmrClk = temp;
+ else
+ sysInfo->freqTmrClk = CONFIG_SYS_CLK_FREQ;
+ }
+ else /* Internal clock */
+ sysInfo->freqTmrClk = sysInfo->freqProcessor;
+}
+
+/********************************************
+ * get_PCI_freq
+ * return PCI bus freq in Hz
+ *********************************************/
+ulong get_PCI_freq (void)
+{
+ sys_info_t sys_info;
+ get_sys_info (&sys_info);
+ return sys_info.freqPCI;
+}
+
+#elif !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) \
+ && !defined(CONFIG_XILINX_440)
+void get_sys_info (sys_info_t * sysInfo)
+{
+ unsigned long strp0;
+ unsigned long temp;
+ unsigned long m;
+
+ /* Extract configured divisors */
+ strp0 = mfdcr( CPC0_STRP0 );
+ sysInfo->pllFwdDivA = 8 - ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 15);
+ sysInfo->pllFwdDivB = 8 - ((strp0 & PLLSYS0_FWD_DIV_B_MASK) >> 12);
+ temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 18;
+ sysInfo->pllFbkDiv = temp ? temp : 16;
+ sysInfo->pllOpbDiv = 1 + ((strp0 & PLLSYS0_OPB_DIV_MASK) >> 10);
+ sysInfo->pllExtBusDiv = 1 + ((strp0 & PLLSYS0_EPB_DIV_MASK) >> 8);
+
+ /* Calculate 'M' based on feedback source */
+ if( strp0 & PLLSYS0_EXTSL_MASK )
+ m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
+ else
+ m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
+
+ /* Now calculate the individual clocks */
+ sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
+ sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
+ sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB;
+ if( get_pvr() == PVR_440GP_RB ) /* Rev B divs an extra 2 -- geez! */
+ sysInfo->freqPLB >>= 1;
+ sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
+ sysInfo->freqEBC = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
+ sysInfo->freqUART = sysInfo->freqPLB;
+}
+#else
+
+#if !defined(CONFIG_XILINX_440)
+void get_sys_info (sys_info_t * sysInfo)
+{
+ unsigned long strp0;
+ unsigned long strp1;
+ unsigned long temp;
+ unsigned long temp1;
+ unsigned long lfdiv;
+ unsigned long m;
+ unsigned long prbdv0;
+
+#if defined(CONFIG_YUCCA)
+ unsigned long sys_freq;
+ unsigned long sys_per=0;
+ unsigned long msr;
+ unsigned long pci_clock_per;
+ unsigned long sdr_ddrpll;
+
+ /*-------------------------------------------------------------------------+
+ | Get the system clock period.
+ +-------------------------------------------------------------------------*/
+ sys_per = determine_sysper();
+
+ msr = (mfmsr () & ~(MSR_EE)); /* disable interrupts */
+
+ /*-------------------------------------------------------------------------+
+ | Calculate the system clock speed from the period.
+ +-------------------------------------------------------------------------*/
+ sys_freq = (ONE_BILLION / sys_per) * 1000;
+#endif
+
+ /* Extract configured divisors */
+ mfsdr( SDR0_SDSTP0,strp0 );
+ mfsdr( SDR0_SDSTP1,strp1 );
+
+ temp = ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 8);
+ sysInfo->pllFwdDivA = temp ? temp : 16 ;
+ temp = ((strp0 & PLLSYS0_FWD_DIV_B_MASK) >> 5);
+ sysInfo->pllFwdDivB = temp ? temp: 8 ;
+ temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 12;
+ sysInfo->pllFbkDiv = temp ? temp : 32;
+ temp = (strp0 & PLLSYS0_OPB_DIV_MASK);
+ sysInfo->pllOpbDiv = temp ? temp : 4;
+ temp = (strp1 & PLLSYS1_PERCLK_DIV_MASK) >> 24;
+ sysInfo->pllExtBusDiv = temp ? temp : 4;
+ prbdv0 = (strp0 >> 2) & 0x7;
+
+ /* Calculate 'M' based on feedback source */
+ temp = (strp0 & PLLSYS0_SEL_MASK) >> 27;
+ temp1 = (strp1 & PLLSYS1_LF_DIV_MASK) >> 26;
+ lfdiv = temp1 ? temp1 : 64;
+ if (temp == 0) { /* PLL output */
+ /* Figure which pll to use */
+ temp = (strp0 & PLLSYS0_SRC_MASK) >> 30;
+ if (!temp)
+ m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivA;
+ else
+ m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivB;
+ }
+ else if (temp == 1) /* CPU output */
+ m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
+ else /* PerClk */
+ m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
+
+ /* Now calculate the individual clocks */
+#if defined(CONFIG_YUCCA)
+ sysInfo->freqVCOMhz = (m * sys_freq) ;
+#else
+ sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m >> 1);
+#endif
+ sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
+ sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
+ sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
+ sysInfo->freqEBC = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
+
+#if defined(CONFIG_YUCCA)
+ /* Determine PCI Clock Period */
+ pci_clock_per = determine_pci_clock_per();
+ sysInfo->freqPCI = (ONE_BILLION/pci_clock_per) * 1000;
+ mfsdr(SDR0_DDR0, sdr_ddrpll);
+ sysInfo->freqDDR = ((sysInfo->freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
+#endif
+
+ sysInfo->freqUART = sysInfo->freqPLB;
+}
+
+#endif
+#endif /* CONFIG_XILINX_440 */
+
+#if defined(CONFIG_YUCCA)
+unsigned long determine_sysper(void)
+{
+ unsigned int fpga_clocking_reg;
+ unsigned int master_clock_selection;
+ unsigned long master_clock_per = 0;
+ unsigned long fb_div_selection;
+ unsigned int vco_div_reg_value;
+ unsigned long vco_div_selection;
+ unsigned long sys_per = 0;
+ int extClkVal;
+
+ /*-------------------------------------------------------------------------+
+ | Read FPGA reg 0 and reg 1 to get FPGA reg information
+ +-------------------------------------------------------------------------*/
+ fpga_clocking_reg = in16(FPGA_REG16);
+
+
+ /* Determine Master Clock Source Selection */
+ master_clock_selection = fpga_clocking_reg & FPGA_REG16_MASTER_CLK_MASK;
+
+ switch(master_clock_selection) {
+ case FPGA_REG16_MASTER_CLK_66_66:
+ master_clock_per = PERIOD_66_66MHZ;
+ break;
+ case FPGA_REG16_MASTER_CLK_50:
+ master_clock_per = PERIOD_50_00MHZ;
+ break;
+ case FPGA_REG16_MASTER_CLK_33_33:
+ master_clock_per = PERIOD_33_33MHZ;
+ break;
+ case FPGA_REG16_MASTER_CLK_25:
+ master_clock_per = PERIOD_25_00MHZ;
+ break;
+ case FPGA_REG16_MASTER_CLK_EXT:
+ if ((extClkVal==EXTCLK_33_33)
+ && (extClkVal==EXTCLK_50)
+ && (extClkVal==EXTCLK_66_66)
+ && (extClkVal==EXTCLK_83)) {
+ /* calculate master clock period from external clock value */
+ master_clock_per=(ONE_BILLION/extClkVal) * 1000;
+ } else {
+ /* Unsupported */
+ DEBUGF ("%s[%d] *** master clock selection failed ***\n", __FUNCTION__,__LINE__);
+ hang();
+ }
+ break;
+ default:
+ /* Unsupported */
+ DEBUGF ("%s[%d] *** master clock selection failed ***\n", __FUNCTION__,__LINE__);
+ hang();
+ break;
+ }
+
+ /* Determine FB divisors values */
+ if ((fpga_clocking_reg & FPGA_REG16_FB1_DIV_MASK) == FPGA_REG16_FB1_DIV_LOW) {
+ if ((fpga_clocking_reg & FPGA_REG16_FB2_DIV_MASK) == FPGA_REG16_FB2_DIV_LOW)
+ fb_div_selection = FPGA_FB_DIV_6;
+ else
+ fb_div_selection = FPGA_FB_DIV_12;
+ } else {
+ if ((fpga_clocking_reg & FPGA_REG16_FB2_DIV_MASK) == FPGA_REG16_FB2_DIV_LOW)
+ fb_div_selection = FPGA_FB_DIV_10;
+ else
+ fb_div_selection = FPGA_FB_DIV_20;
+ }
+
+ /* Determine VCO divisors values */
+ vco_div_reg_value = fpga_clocking_reg & FPGA_REG16_VCO_DIV_MASK;
+
+ switch(vco_div_reg_value) {
+ case FPGA_REG16_VCO_DIV_4:
+ vco_div_selection = FPGA_VCO_DIV_4;
+ break;
+ case FPGA_REG16_VCO_DIV_6:
+ vco_div_selection = FPGA_VCO_DIV_6;
+ break;
+ case FPGA_REG16_VCO_DIV_8:
+ vco_div_selection = FPGA_VCO_DIV_8;
+ break;
+ case FPGA_REG16_VCO_DIV_10:
+ default:
+ vco_div_selection = FPGA_VCO_DIV_10;
+ break;
+ }
+
+ if (master_clock_selection == FPGA_REG16_MASTER_CLK_EXT) {
+ switch(master_clock_per) {
+ case PERIOD_25_00MHZ:
+ if (fb_div_selection == FPGA_FB_DIV_12) {
+ if (vco_div_selection == FPGA_VCO_DIV_4)
+ sys_per = PERIOD_75_00MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_6)
+ sys_per = PERIOD_50_00MHZ;
+ }
+ break;
+ case PERIOD_33_33MHZ:
+ if (fb_div_selection == FPGA_FB_DIV_6) {
+ if (vco_div_selection == FPGA_VCO_DIV_4)
+ sys_per = PERIOD_50_00MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_6)
+ sys_per = PERIOD_33_33MHZ;
+ }
+ if (fb_div_selection == FPGA_FB_DIV_10) {
+ if (vco_div_selection == FPGA_VCO_DIV_4)
+ sys_per = PERIOD_83_33MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_10)
+ sys_per = PERIOD_33_33MHZ;
+ }
+ if (fb_div_selection == FPGA_FB_DIV_12) {
+ if (vco_div_selection == FPGA_VCO_DIV_4)
+ sys_per = PERIOD_100_00MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_6)
+ sys_per = PERIOD_66_66MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_8)
+ sys_per = PERIOD_50_00MHZ;
+ }
+ break;
+ case PERIOD_50_00MHZ:
+ if (fb_div_selection == FPGA_FB_DIV_6) {
+ if (vco_div_selection == FPGA_VCO_DIV_4)
+ sys_per = PERIOD_75_00MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_6)
+ sys_per = PERIOD_50_00MHZ;
+ }
+ if (fb_div_selection == FPGA_FB_DIV_10) {
+ if (vco_div_selection == FPGA_VCO_DIV_6)
+ sys_per = PERIOD_83_33MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_10)
+ sys_per = PERIOD_50_00MHZ;
+ }
+ if (fb_div_selection == FPGA_FB_DIV_12) {
+ if (vco_div_selection == FPGA_VCO_DIV_6)
+ sys_per = PERIOD_100_00MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_8)
+ sys_per = PERIOD_75_00MHZ;
+ }
+ break;
+ case PERIOD_66_66MHZ:
+ if (fb_div_selection == FPGA_FB_DIV_6) {
+ if (vco_div_selection == FPGA_VCO_DIV_4)
+ sys_per = PERIOD_100_00MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_6)
+ sys_per = PERIOD_66_66MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_8)
+ sys_per = PERIOD_50_00MHZ;
+ }
+ if (fb_div_selection == FPGA_FB_DIV_10) {
+ if (vco_div_selection == FPGA_VCO_DIV_8)
+ sys_per = PERIOD_83_33MHZ;
+ if (vco_div_selection == FPGA_VCO_DIV_10)
+ sys_per = PERIOD_66_66MHZ;
+ }
+ if (fb_div_selection == FPGA_FB_DIV_12) {
+ if (vco_div_selection == FPGA_VCO_DIV_8)
+ sys_per = PERIOD_100_00MHZ;
+ }
+ break;
+ default:
+ break;
+ }
+
+ if (sys_per == 0) {
+ /* Other combinations are not supported */
+ DEBUGF ("%s[%d] *** sys period compute failed ***\n", __FUNCTION__,__LINE__);
+ hang();
+ }
+ } else {
+ /* calcul system clock without cheking */
+ /* if engineering option clock no check is selected */
+ /* sys_per = master_clock_per * vco_div_selection / fb_div_selection */
+ sys_per = (master_clock_per/fb_div_selection) * vco_div_selection;
+ }
+
+ return(sys_per);
+}
+
+/*-------------------------------------------------------------------------+
+| determine_pci_clock_per.
++-------------------------------------------------------------------------*/
+unsigned long determine_pci_clock_per(void)
+{
+ unsigned long pci_clock_selection, pci_period;
+
+ /*-------------------------------------------------------------------------+
+ | Read FPGA reg 6 to get PCI 0 FPGA reg information
+ +-------------------------------------------------------------------------*/
+ pci_clock_selection = in16(FPGA_REG16); /* was reg6 averifier */
+
+
+ pci_clock_selection = pci_clock_selection & FPGA_REG16_PCI0_CLK_MASK;
+
+ switch (pci_clock_selection) {
+ case FPGA_REG16_PCI0_CLK_133_33:
+ pci_period = PERIOD_133_33MHZ;
+ break;
+ case FPGA_REG16_PCI0_CLK_100:
+ pci_period = PERIOD_100_00MHZ;
+ break;
+ case FPGA_REG16_PCI0_CLK_66_66:
+ pci_period = PERIOD_66_66MHZ;
+ break;
+ default:
+ pci_period = PERIOD_33_33MHZ;;
+ break;
+ }
+
+ return(pci_period);
+}
+#endif
+
+#elif defined(CONFIG_XILINX_405)
+extern void get_sys_info (sys_info_t * sysInfo);
+extern ulong get_PCI_freq (void);
+
+#elif defined(CONFIG_AP1000)
+void get_sys_info (sys_info_t * sysInfo)
+{
+ sysInfo->freqProcessor = 240 * 1000 * 1000;
+ sysInfo->freqPLB = 80 * 1000 * 1000;
+ sysInfo->freqPCI = 33 * 1000 * 1000;
+}
+
+#elif defined(CONFIG_405)
+
+void get_sys_info (sys_info_t * sysInfo)
+{
+ sysInfo->freqVCOMhz=3125000;
+ sysInfo->freqProcessor=12*1000*1000;
+ sysInfo->freqPLB=50*1000*1000;
+ sysInfo->freqPCI=66*1000*1000;
+}
+
+#elif defined(CONFIG_405EP)
+void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
+{
+ unsigned long pllmr0;
+ unsigned long pllmr1;
+ unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
+ unsigned long m;
+ unsigned long pllmr0_ccdv;
+
+ /*
+ * Read PLL Mode registers
+ */
+ pllmr0 = mfdcr (CPC0_PLLMR0);
+ pllmr1 = mfdcr (CPC0_PLLMR1);
+
+ /*
+ * Determine forward divider A
+ */
+ sysInfo->pllFwdDiv = 8 - ((pllmr1 & PLLMR1_FWDVA_MASK) >> 16);
+
+ /*
+ * Determine forward divider B (should be equal to A)
+ */
+ sysInfo->pllFwdDivB = 8 - ((pllmr1 & PLLMR1_FWDVB_MASK) >> 12);
+
+ /*
+ * Determine FBK_DIV.
+ */
+ sysInfo->pllFbkDiv = ((pllmr1 & PLLMR1_FBMUL_MASK) >> 20);
+ if (sysInfo->pllFbkDiv == 0)
+ sysInfo->pllFbkDiv = 16;
+
+ /*
+ * Determine PLB_DIV.
+ */
+ sysInfo->pllPlbDiv = ((pllmr0 & PLLMR0_CPU_TO_PLB_MASK) >> 16) + 1;
+
+ /*
+ * Determine PCI_DIV.
+ */
+ sysInfo->pllPciDiv = (pllmr0 & PLLMR0_PCI_TO_PLB_MASK) + 1;
+
+ /*
+ * Determine EXTBUS_DIV.
+ */
+ sysInfo->pllExtBusDiv = ((pllmr0 & PLLMR0_EXB_TO_PLB_MASK) >> 8) + 2;
+
+ /*
+ * Determine OPB_DIV.
+ */
+ sysInfo->pllOpbDiv = ((pllmr0 & PLLMR0_OPB_TO_PLB_MASK) >> 12) + 1;
+
+ /*
+ * Determine the M factor
+ */
+ m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB;
+
+ /*
+ * Determine VCO clock frequency
+ */
+ sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
+ (unsigned long long)sysClkPeriodPs;
+
+ /*
+ * Determine CPU clock frequency
+ */
+ pllmr0_ccdv = ((pllmr0 & PLLMR0_CPU_DIV_MASK) >> 20) + 1;
+ if (pllmr1 & PLLMR1_SSCS_MASK) {
+ /*
+ * This is true if FWDVA == FWDVB:
+ * sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv)
+ * / pllmr0_ccdv;
+ */
+ sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv * sysInfo->pllFwdDivB)
+ / sysInfo->pllFwdDiv / pllmr0_ccdv;
+ } else {
+ sysInfo->freqProcessor = CONFIG_SYS_CLK_FREQ / pllmr0_ccdv;
+ }
+
+ /*
+ * Determine PLB clock frequency
+ */
+ sysInfo->freqPLB = sysInfo->freqProcessor / sysInfo->pllPlbDiv;
+
+ sysInfo->freqEBC = sysInfo->freqPLB / sysInfo->pllExtBusDiv;
+
+ sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv;
+
+ sysInfo->freqUART = sysInfo->freqProcessor * pllmr0_ccdv;
+}
+
+
+/********************************************
+ * get_PCI_freq
+ * return PCI bus freq in Hz
+ *********************************************/
+ulong get_PCI_freq (void)
+{
+ ulong val;
+ PPC4xx_SYS_INFO sys_info;
+
+ get_sys_info (&sys_info);
+ val = sys_info.freqPLB / sys_info.pllPciDiv;
+ return val;
+}
+
+#elif defined(CONFIG_405EZ)
+void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
+{
+ unsigned long cpr_plld;
+ unsigned long cpr_pllc;
+ unsigned long cpr_primad;
+ unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ/1000);
+ unsigned long primad_cpudv;
+ unsigned long m;
+ unsigned long plloutb;
+
+ /*
+ * Read PLL Mode registers
+ */
+ mfcpr(CPR0_PLLD, cpr_plld);
+ mfcpr(CPR0_PLLC, cpr_pllc);
+
+ /*
+ * Determine forward divider A
+ */
+ sysInfo->pllFwdDiv = ((cpr_plld & PLLD_FWDVA_MASK) >> 16);
+
+ /*
+ * Determine forward divider B
+ */
+ sysInfo->pllFwdDivB = ((cpr_plld & PLLD_FWDVB_MASK) >> 8);
+ if (sysInfo->pllFwdDivB == 0)
+ sysInfo->pllFwdDivB = 8;
+
+ /*
+ * Determine FBK_DIV.
+ */
+ sysInfo->pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24);
+ if (sysInfo->pllFbkDiv == 0)
+ sysInfo->pllFbkDiv = 256;
+
+ /*
+ * Read CPR_PRIMAD register
+ */
+ mfcpr(CPC0_PRIMAD, cpr_primad);
+
+ /*
+ * Determine PLB_DIV.
+ */
+ sysInfo->pllPlbDiv = ((cpr_primad & PRIMAD_PLBDV_MASK) >> 16);
+ if (sysInfo->pllPlbDiv == 0)
+ sysInfo->pllPlbDiv = 16;
+
+ /*
+ * Determine EXTBUS_DIV.
+ */
+ sysInfo->pllExtBusDiv = (cpr_primad & PRIMAD_EBCDV_MASK);
+ if (sysInfo->pllExtBusDiv == 0)
+ sysInfo->pllExtBusDiv = 16;
+
+ /*
+ * Determine OPB_DIV.
+ */
+ sysInfo->pllOpbDiv = ((cpr_primad & PRIMAD_OPBDV_MASK) >> 8);
+ if (sysInfo->pllOpbDiv == 0)
+ sysInfo->pllOpbDiv = 16;
+
+ /*
+ * Determine the M factor
+ */
+ if (cpr_pllc & PLLC_SRC_MASK)
+ m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB;
+ else
+ m = sysInfo->pllFbkDiv * sysInfo->pllFwdDiv;
+
+ /*
+ * Determine VCO clock frequency
+ */
+ sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
+ (unsigned long long)sysClkPeriodPs;
+
+ /*
+ * Determine CPU clock frequency
+ */
+ primad_cpudv = ((cpr_primad & PRIMAD_CPUDV_MASK) >> 24);
+ if (primad_cpudv == 0)
+ primad_cpudv = 16;
+
+ sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * m) /
+ sysInfo->pllFwdDiv / primad_cpudv;
+
+ /*
+ * Determine PLB clock frequency
+ */
+ sysInfo->freqPLB = (CONFIG_SYS_CLK_FREQ * m) /
+ sysInfo->pllFwdDiv / sysInfo->pllPlbDiv;
+
+ sysInfo->freqOPB = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) /
+ sysInfo->pllOpbDiv;
+
+ sysInfo->freqEBC = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) /
+ sysInfo->pllExtBusDiv;
+
+ plloutb = ((CONFIG_SYS_CLK_FREQ * ((cpr_pllc & PLLC_SRC_MASK) ?
+ sysInfo->pllFwdDivB : sysInfo->pllFwdDiv) * sysInfo->pllFbkDiv) /
+ sysInfo->pllFwdDivB);
+ sysInfo->freqUART = plloutb;
+}
+
+#elif defined(CONFIG_405EX)
+
+/*
+ * TODO: We need to get the CPR registers and calculate these values correctly!!!!
+ * We need the specs!!!!
+ */
+static unsigned char get_fbdv(unsigned char index)
+{
+ unsigned char ret = 0;
+ /* This is table should be 256 bytes.
+ * Only take first 52 values.
+ */
+ unsigned char fbdv_tb[] = {
+ 0x00, 0xff, 0x7f, 0xfd,
+ 0x7a, 0xf5, 0x6a, 0xd5,
+ 0x2a, 0xd4, 0x29, 0xd3,
+ 0x26, 0xcc, 0x19, 0xb3,
+ 0x67, 0xce, 0x1d, 0xbb,
+ 0x77, 0xee, 0x5d, 0xba,
+ 0x74, 0xe9, 0x52, 0xa5,
+ 0x4b, 0x96, 0x2c, 0xd8,
+ 0x31, 0xe3, 0x46, 0x8d,
+ 0x1b, 0xb7, 0x6f, 0xde,
+ 0x3d, 0xfb, 0x76, 0xed,
+ 0x5a, 0xb5, 0x6b, 0xd6,
+ 0x2d, 0xdb, 0x36, 0xec,
+
+ };
+
+ if ((index & 0x7f) == 0)
+ return 1;
+ while (ret < sizeof (fbdv_tb)) {
+ if (fbdv_tb[ret] == index)
+ break;
+ ret++;
+ }
+ ret++;
+
+ return ret;
+}
+
+#define PLL_FBK_PLL_LOCAL 0
+#define PLL_FBK_CPU 1
+#define PLL_FBK_PERCLK 5
+
+void get_sys_info (sys_info_t * sysInfo)
+{
+ unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
+ unsigned long m = 1;
+ unsigned int tmp;
+ unsigned char fwdva[16] = {
+ 1, 2, 14, 9, 4, 11, 16, 13,
+ 12, 5, 6, 15, 10, 7, 8, 3,
+ };
+ unsigned char sel, cpudv0, plb2xDiv;
+
+ mfcpr(CPR0_PLLD, tmp);
+
+ /*
+ * Determine forward divider A
+ */
+ sysInfo->pllFwdDiv = fwdva[((tmp >> 16) & 0x0f)]; /* FWDVA */
+
+ /*
+ * Determine FBK_DIV.
+ */
+ sysInfo->pllFbkDiv = get_fbdv(((tmp >> 24) & 0x0ff)); /* FBDV */
+
+ /*
+ * Determine PLBDV0
+ */
+ sysInfo->pllPlbDiv = 2;
+
+ /*
+ * Determine PERDV0
+ */
+ mfcpr(CPR0_PERD, tmp);
+ tmp = (tmp >> 24) & 0x03;
+ sysInfo->pllExtBusDiv = (tmp == 0) ? 4 : tmp;
+
+ /*
+ * Determine OPBDV0
+ */
+ mfcpr(CPR0_OPBD0, tmp);
+ tmp = (tmp >> 24) & 0x03;
+ sysInfo->pllOpbDiv = (tmp == 0) ? 4 : tmp;
+
+ /* Determine PLB2XDV0 */
+ mfcpr(CPR0_PLBD, tmp);
+ tmp = (tmp >> 16) & 0x07;
+ plb2xDiv = (tmp == 0) ? 8 : tmp;
+
+ /* Determine CPUDV0 */
+ mfcpr(CPR0_CPUD, tmp);
+ tmp = (tmp >> 24) & 0x07;
+ cpudv0 = (tmp == 0) ? 8 : tmp;
+
+ /* Determine SEL(5:7) in CPR0_PLLC */
+ mfcpr(CPR0_PLLC, tmp);
+ sel = (tmp >> 24) & 0x07;
+
+ /*
+ * Determine the M factor
+ * PLL local: M = FBDV
+ * CPU clock: M = FBDV * FWDVA * CPUDV0
+ * PerClk : M = FBDV * FWDVA * PLB2XDV0 * PLBDV0(2) * OPBDV0 * PERDV0
+ *
+ */
+ switch (sel) {
+ case PLL_FBK_CPU:
+ m = sysInfo->pllFwdDiv * cpudv0;
+ break;
+ case PLL_FBK_PERCLK:
+ m = sysInfo->pllFwdDiv * plb2xDiv * 2
+ * sysInfo->pllOpbDiv * sysInfo->pllExtBusDiv;
+ break;
+ case PLL_FBK_PLL_LOCAL:
+ break;
+ default:
+ printf("%s unknown m\n", __FUNCTION__);
+ return;
+
+ }
+ m *= sysInfo->pllFbkDiv;
+
+ /*
+ * Determine VCO clock frequency
+ */
+ sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
+ (unsigned long long)sysClkPeriodPs;
+
+ /*
+ * Determine CPU clock frequency
+ */
+ sysInfo->freqProcessor = sysInfo->freqVCOHz / (sysInfo->pllFwdDiv * cpudv0);
+
+ /*
+ * Determine PLB clock frequency, ddr1x should be the same
+ */
+ sysInfo->freqPLB = sysInfo->freqVCOHz / (sysInfo->pllFwdDiv * plb2xDiv * 2);
+ sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
+ sysInfo->freqDDR = sysInfo->freqPLB;
+ sysInfo->freqEBC = sysInfo->freqOPB / sysInfo->pllExtBusDiv;
+ sysInfo->freqUART = sysInfo->freqPLB;
+}
+
+#endif
+
+int get_clocks (void)
+{
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
+ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
+ defined(CONFIG_405EX) || defined(CONFIG_405) || \
+ defined(CONFIG_440)
+ sys_info_t sys_info;
+
+ get_sys_info (&sys_info);
+ gd->cpu_clk = sys_info.freqProcessor;
+ gd->bus_clk = sys_info.freqPLB;
+
+#endif /* defined(CONFIG_405GP) || defined(CONFIG_405CR) */
+
+#ifdef CONFIG_IOP480
+ gd->cpu_clk = 66000000;
+ gd->bus_clk = 66000000;
+#endif
+ return (0);
+}
+
+
+/********************************************
+ * get_bus_freq
+ * return PLB bus freq in Hz
+ *********************************************/
+ulong get_bus_freq (ulong dummy)
+{
+ ulong val;
+
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
+ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
+ defined(CONFIG_405EX) || defined(CONFIG_405) || \
+ defined(CONFIG_440)
+ sys_info_t sys_info;
+
+ get_sys_info (&sys_info);
+ val = sys_info.freqPLB;
+
+#elif defined(CONFIG_IOP480)
+
+ val = 66;
+
+#else
+# error get_bus_freq() not implemented
+#endif
+
+ return val;
+}
+
+#if !defined(CONFIG_IOP480)
+ulong get_OPB_freq (void)
+{
+ PPC4xx_SYS_INFO sys_info;
+
+ get_sys_info (&sys_info);
+
+ return sys_info.freqOPB;
+}
+#endif
diff --git a/arch/ppc/cpu/ppc4xx/start.S b/arch/ppc/cpu/ppc4xx/start.S
new file mode 100644
index 0000000..927c88c
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/start.S
@@ -0,0 +1,2170 @@
+/*
+ * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
+ * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+ * Copyright (C) 2000,2001,2002 Wolfgang Denk <wd@denx.de>
+ * Copyright (C) 2007 Stefan Roese <sr@denx.de>, DENX Software Engineering
+ * Copyright (c) 2008 Nuovation System Designs, LLC
+ * Grant Erickson <gerickson@nuovations.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*------------------------------------------------------------------------------+
+ * This source code is dual-licensed. You may use it under the terms of the
+ * GNU General Public License version 2, or under the license below.
+ *
+ * This source code has been made available to you by IBM on an AS-IS
+ * basis. Anyone receiving this source is licensed under IBM
+ * copyrights to use it in any way he or she deems fit, including
+ * copying it, modifying it, compiling it, and redistributing it either
+ * with or without modifications. No license under IBM patents or
+ * patent applications is to be implied by the copyright license.
+ *
+ * Any user of this software should understand that IBM cannot provide
+ * technical support for this software and will not be responsible for
+ * any consequences resulting from the use of this software.
+ *
+ * Any person who transfers this source code or any derivative work
+ * must include the IBM copyright notice, this paragraph, and the
+ * preceding two paragraphs in the transferred software.
+ *
+ * COPYRIGHT I B M CORPORATION 1995
+ * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
+ *-------------------------------------------------------------------------------
+ */
+
+/* U-Boot - Startup Code for AMCC 4xx PowerPC based Embedded Boards
+ *
+ *
+ * The processor starts at 0xfffffffc and the code is executed
+ * from flash/rom.
+ * in memory, but as long we don't jump around before relocating.
+ * board_init lies at a quite high address and when the cpu has
+ * jumped there, everything is ok.
+ * This works because the cpu gives the FLASH (CS0) the whole
+ * address space at startup, and board_init lies as a echo of
+ * the flash somewhere up there in the memorymap.
+ *
+ * board_init will change CS0 to be positioned at the correct
+ * address and (s)dram will be positioned at address 0
+ */
+#include <config.h>
+#include <ppc4xx.h>
+#include <timestamp.h>
+#include <version.h>
+
+#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+#include <asm/ppc4xx-isram.h>
+
+#ifndef CONFIG_IDENT_STRING
+#define CONFIG_IDENT_STRING ""
+#endif
+
+#ifdef CONFIG_SYS_INIT_DCACHE_CS
+# if (CONFIG_SYS_INIT_DCACHE_CS == 0)
+# define PBxAP PB1AP
+# define PBxCR PB0CR
+# if (defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))
+# define PBxAP_VAL CONFIG_SYS_EBC_PB0AP
+# define PBxCR_VAL CONFIG_SYS_EBC_PB0CR
+# endif
+# endif
+# if (CONFIG_SYS_INIT_DCACHE_CS == 1)
+# define PBxAP PB1AP
+# define PBxCR PB1CR
+# if (defined(CONFIG_SYS_EBC_PB1AP) && defined(CONFIG_SYS_EBC_PB1CR))
+# define PBxAP_VAL CONFIG_SYS_EBC_PB1AP
+# define PBxCR_VAL CONFIG_SYS_EBC_PB1CR
+# endif
+# endif
+# if (CONFIG_SYS_INIT_DCACHE_CS == 2)
+# define PBxAP PB2AP
+# define PBxCR PB2CR
+# if (defined(CONFIG_SYS_EBC_PB2AP) && defined(CONFIG_SYS_EBC_PB2CR))
+# define PBxAP_VAL CONFIG_SYS_EBC_PB2AP
+# define PBxCR_VAL CONFIG_SYS_EBC_PB2CR
+# endif
+# endif
+# if (CONFIG_SYS_INIT_DCACHE_CS == 3)
+# define PBxAP PB3AP
+# define PBxCR PB3CR
+# if (defined(CONFIG_SYS_EBC_PB3AP) && defined(CONFIG_SYS_EBC_PB3CR))
+# define PBxAP_VAL CONFIG_SYS_EBC_PB3AP
+# define PBxCR_VAL CONFIG_SYS_EBC_PB3CR
+# endif
+# endif
+# if (CONFIG_SYS_INIT_DCACHE_CS == 4)
+# define PBxAP PB4AP
+# define PBxCR PB4CR
+# if (defined(CONFIG_SYS_EBC_PB4AP) && defined(CONFIG_SYS_EBC_PB4CR))
+# define PBxAP_VAL CONFIG_SYS_EBC_PB4AP
+# define PBxCR_VAL CONFIG_SYS_EBC_PB4CR
+# endif
+# endif
+# if (CONFIG_SYS_INIT_DCACHE_CS == 5)
+# define PBxAP PB5AP
+# define PBxCR PB5CR
+# if (defined(CONFIG_SYS_EBC_PB5AP) && defined(CONFIG_SYS_EBC_PB5CR))
+# define PBxAP_VAL CONFIG_SYS_EBC_PB5AP
+# define PBxCR_VAL CONFIG_SYS_EBC_PB5CR
+# endif
+# endif
+# if (CONFIG_SYS_INIT_DCACHE_CS == 6)
+# define PBxAP PB6AP
+# define PBxCR PB6CR
+# if (defined(CONFIG_SYS_EBC_PB6AP) && defined(CONFIG_SYS_EBC_PB6CR))
+# define PBxAP_VAL CONFIG_SYS_EBC_PB6AP
+# define PBxCR_VAL CONFIG_SYS_EBC_PB6CR
+# endif
+# endif
+# if (CONFIG_SYS_INIT_DCACHE_CS == 7)
+# define PBxAP PB7AP
+# define PBxCR PB7CR
+# if (defined(CONFIG_SYS_EBC_PB7AP) && defined(CONFIG_SYS_EBC_PB7CR))
+# define PBxAP_VAL CONFIG_SYS_EBC_PB7AP
+# define PBxCR_VAL CONFIG_SYS_EBC_PB7CR
+# endif
+# endif
+# ifndef PBxAP_VAL
+# define PBxAP_VAL 0
+# endif
+# ifndef PBxCR_VAL
+# define PBxCR_VAL 0
+# endif
+/*
+ * Memory Bank x (nothingness) initialization CONFIG_SYS_INIT_RAM_ADDR + 64 MiB
+ * used as temporary stack pointer for the primordial stack
+ */
+# ifndef CONFIG_SYS_INIT_DCACHE_PBxAR
+# define CONFIG_SYS_INIT_DCACHE_PBxAR (EBC_BXAP_BME_DISABLED | \
+ EBC_BXAP_TWT_ENCODE(7) | \
+ EBC_BXAP_BCE_DISABLE | \
+ EBC_BXAP_BCT_2TRANS | \
+ EBC_BXAP_CSN_ENCODE(0) | \
+ EBC_BXAP_OEN_ENCODE(0) | \
+ EBC_BXAP_WBN_ENCODE(0) | \
+ EBC_BXAP_WBF_ENCODE(0) | \
+ EBC_BXAP_TH_ENCODE(2) | \
+ EBC_BXAP_RE_DISABLED | \
+ EBC_BXAP_SOR_NONDELAYED | \
+ EBC_BXAP_BEM_WRITEONLY | \
+ EBC_BXAP_PEN_DISABLED)
+# endif /* CONFIG_SYS_INIT_DCACHE_PBxAR */
+# ifndef CONFIG_SYS_INIT_DCACHE_PBxCR
+# define CONFIG_SYS_INIT_DCACHE_PBxCR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_INIT_RAM_ADDR) | \
+ EBC_BXCR_BS_64MB | \
+ EBC_BXCR_BU_RW | \
+ EBC_BXCR_BW_16BIT)
+# endif /* CONFIG_SYS_INIT_DCACHE_PBxCR */
+# ifndef CONFIG_SYS_INIT_RAM_PATTERN
+# define CONFIG_SYS_INIT_RAM_PATTERN 0xDEADDEAD
+# endif
+#endif /* CONFIG_SYS_INIT_DCACHE_CS */
+
+#if (defined(CONFIG_SYS_INIT_RAM_DCACHE) && (CONFIG_SYS_INIT_RAM_END > (4 << 10)))
+#error Only 4k of init-ram is supported - please adjust CONFIG_SYS_INIT_RAM_END!
+#endif
+
+/*
+ * Unless otherwise overriden, enable two 128MB cachable instruction regions
+ * at CONFIG_SYS_SDRAM_BASE and another 128MB cacheable instruction region covering
+ * NOR flash at CONFIG_SYS_FLASH_BASE. Disable all cacheable data regions.
+ */
+#if !defined(CONFIG_SYS_FLASH_BASE)
+/* If not already defined, set it to the "last" 128MByte region */
+# define CONFIG_SYS_FLASH_BASE 0xf8000000
+#endif
+#if !defined(CONFIG_SYS_ICACHE_SACR_VALUE)
+# define CONFIG_SYS_ICACHE_SACR_VALUE \
+ (PPC_128MB_SACR_VALUE(CONFIG_SYS_SDRAM_BASE + ( 0 << 20)) | \
+ PPC_128MB_SACR_VALUE(CONFIG_SYS_SDRAM_BASE + (128 << 20)) | \
+ PPC_128MB_SACR_VALUE(CONFIG_SYS_FLASH_BASE))
+#endif /* !defined(CONFIG_SYS_ICACHE_SACR_VALUE) */
+
+#if !defined(CONFIG_SYS_DCACHE_SACR_VALUE)
+# define CONFIG_SYS_DCACHE_SACR_VALUE \
+ (0x00000000)
+#endif /* !defined(CONFIG_SYS_DCACHE_SACR_VALUE) */
+
+#define function_prolog(func_name) .text; \
+ .align 2; \
+ .globl func_name; \
+ func_name:
+#define function_epilog(func_name) .type func_name,@function; \
+ .size func_name,.-func_name
+
+/* We don't want the MMU yet.
+*/
+#undef MSR_KERNEL
+#define MSR_KERNEL ( MSR_ME ) /* Machine Check */
+
+
+ .extern ext_bus_cntlr_init
+#ifdef CONFIG_NAND_U_BOOT
+ .extern reconfig_tlb0
+#endif
+
+/*
+ * Set up GOT: Global Offset Table
+ *
+ * Use r12 to access the GOT
+ */
+#if !defined(CONFIG_NAND_SPL)
+ START_GOT
+ GOT_ENTRY(_GOT2_TABLE_)
+ GOT_ENTRY(_FIXUP_TABLE_)
+
+ GOT_ENTRY(_start)
+ GOT_ENTRY(_start_of_vectors)
+ GOT_ENTRY(_end_of_vectors)
+ GOT_ENTRY(transfer_to_handler)
+
+ GOT_ENTRY(__init_end)
+ GOT_ENTRY(_end)
+ GOT_ENTRY(__bss_start)
+ END_GOT
+#endif /* CONFIG_NAND_SPL */
+
+#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+ /*
+ * NAND U-Boot image is started from offset 0
+ */
+ .text
+#if defined(CONFIG_440)
+ bl reconfig_tlb0
+#endif
+ GET_GOT
+ bl cpu_init_f /* run low-level CPU init code (from Flash) */
+ bl board_init_f
+#endif
+
+#if defined(CONFIG_SYS_RAMBOOT)
+ /*
+ * 4xx RAM-booting U-Boot image is started from offset 0
+ */
+ .text
+ bl _start_440
+#endif
+
+/*
+ * 440 Startup -- on reset only the top 4k of the effective
+ * address space is mapped in by an entry in the instruction
+ * and data shadow TLB. The .bootpg section is located in the
+ * top 4k & does only what's necessary to map in the the rest
+ * of the boot rom. Once the boot rom is mapped in we can
+ * proceed with normal startup.
+ *
+ * NOTE: CS0 only covers the top 2MB of the effective address
+ * space after reset.
+ */
+
+#if defined(CONFIG_440)
+#if !defined(CONFIG_NAND_SPL)
+ .section .bootpg,"ax"
+#endif
+ .globl _start_440
+
+/**************************************************************************/
+_start_440:
+ /*--------------------------------------------------------------------+
+ | 440EPX BUP Change - Hardware team request
+ +--------------------------------------------------------------------*/
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+ sync
+ nop
+ nop
+#endif
+ /*----------------------------------------------------------------+
+ | Core bug fix. Clear the esr
+ +-----------------------------------------------------------------*/
+ li r0,0
+ mtspr SPRN_ESR,r0
+ /*----------------------------------------------------------------*/
+ /* Clear and set up some registers. */
+ /*----------------------------------------------------------------*/
+ iccci r0,r0 /* NOTE: operands not used for 440 */
+ dccci r0,r0 /* NOTE: operands not used for 440 */
+ sync
+ li r0,0
+ mtspr SPRN_SRR0,r0
+ mtspr SPRN_SRR1,r0
+ mtspr SPRN_CSRR0,r0
+ mtspr SPRN_CSRR1,r0
+ /* NOTE: 440GX adds machine check status regs */
+#if defined(CONFIG_440) && !defined(CONFIG_440GP)
+ mtspr SPRN_MCSRR0,r0
+ mtspr SPRN_MCSRR1,r0
+ mfspr r1,SPRN_MCSR
+ mtspr SPRN_MCSR,r1
+#endif
+
+ /*----------------------------------------------------------------*/
+ /* CCR0 init */
+ /*----------------------------------------------------------------*/
+ /* Disable store gathering & broadcast, guarantee inst/data
+ * cache block touch, force load/store alignment
+ * (see errata 1.12: 440_33)
+ */
+ lis r1,0x0030 /* store gathering & broadcast disable */
+ ori r1,r1,0x6000 /* cache touch */
+ mtspr SPRN_CCR0,r1
+
+ /*----------------------------------------------------------------*/
+ /* Initialize debug */
+ /*----------------------------------------------------------------*/
+ mfspr r1,SPRN_DBCR0
+ andis. r1, r1, 0x8000 /* test DBCR0[EDM] bit */
+ bne skip_debug_init /* if set, don't clear debug register */
+ mtspr SPRN_DBCR0,r0
+ mtspr SPRN_DBCR1,r0
+ mtspr SPRN_DBCR2,r0
+ mtspr SPRN_IAC1,r0
+ mtspr SPRN_IAC2,r0
+ mtspr SPRN_IAC3,r0
+ mtspr SPRN_DAC1,r0
+ mtspr SPRN_DAC2,r0
+ mtspr SPRN_DVC1,r0
+ mtspr SPRN_DVC2,r0
+
+ mfspr r1,SPRN_DBSR
+ mtspr SPRN_DBSR,r1 /* Clear all valid bits */
+skip_debug_init:
+
+#if defined (CONFIG_440SPE)
+ /*----------------------------------------------------------------+
+ | Initialize Core Configuration Reg1.
+ | a. ICDPEI: Record even parity. Normal operation.
+ | b. ICTPEI: Record even parity. Normal operation.
+ | c. DCTPEI: Record even parity. Normal operation.
+ | d. DCDPEI: Record even parity. Normal operation.
+ | e. DCUPEI: Record even parity. Normal operation.
+ | f. DCMPEI: Record even parity. Normal operation.
+ | g. FCOM: Normal operation
+ | h. MMUPEI: Record even parity. Normal operation.
+ | i. FFF: Flush only as much data as necessary.
+ | j. TCS: Timebase increments from CPU clock.
+ +-----------------------------------------------------------------*/
+ li r0,0
+ mtspr SPRN_CCR1, r0
+
+ /*----------------------------------------------------------------+
+ | Reset the timebase.
+ | The previous write to CCR1 sets the timebase source.
+ +-----------------------------------------------------------------*/
+ mtspr SPRN_TBWL, r0
+ mtspr SPRN_TBWU, r0
+#endif
+
+ /*----------------------------------------------------------------*/
+ /* Setup interrupt vectors */
+ /*----------------------------------------------------------------*/
+ mtspr SPRN_IVPR,r0 /* Vectors start at 0x0000_0000 */
+ li r1,0x0100
+ mtspr SPRN_IVOR0,r1 /* Critical input */
+ li r1,0x0200
+ mtspr SPRN_IVOR1,r1 /* Machine check */
+ li r1,0x0300
+ mtspr SPRN_IVOR2,r1 /* Data storage */
+ li r1,0x0400
+ mtspr SPRN_IVOR3,r1 /* Instruction storage */
+ li r1,0x0500
+ mtspr SPRN_IVOR4,r1 /* External interrupt */
+ li r1,0x0600
+ mtspr SPRN_IVOR5,r1 /* Alignment */
+ li r1,0x0700
+ mtspr SPRN_IVOR6,r1 /* Program check */
+ li r1,0x0800
+ mtspr SPRN_IVOR7,r1 /* Floating point unavailable */
+ li r1,0x0c00
+ mtspr SPRN_IVOR8,r1 /* System call */
+ li r1,0x0a00
+ mtspr SPRN_IVOR9,r1 /* Auxiliary Processor unavailable */
+ li r1,0x0900
+ mtspr SPRN_IVOR10,r1 /* Decrementer */
+ li r1,0x1300
+ mtspr SPRN_IVOR13,r1 /* Data TLB error */
+ li r1,0x1400
+ mtspr SPRN_IVOR14,r1 /* Instr TLB error */
+ li r1,0x2000
+ mtspr SPRN_IVOR15,r1 /* Debug */
+
+ /*----------------------------------------------------------------*/
+ /* Configure cache regions */
+ /*----------------------------------------------------------------*/
+ mtspr SPRN_INV0,r0
+ mtspr SPRN_INV1,r0
+ mtspr SPRN_INV2,r0
+ mtspr SPRN_INV3,r0
+ mtspr SPRN_DNV0,r0
+ mtspr SPRN_DNV1,r0
+ mtspr SPRN_DNV2,r0
+ mtspr SPRN_DNV3,r0
+ mtspr SPRN_ITV0,r0
+ mtspr SPRN_ITV1,r0
+ mtspr SPRN_ITV2,r0
+ mtspr SPRN_ITV3,r0
+ mtspr SPRN_DTV0,r0
+ mtspr SPRN_DTV1,r0
+ mtspr SPRN_DTV2,r0
+ mtspr SPRN_DTV3,r0
+
+ /*----------------------------------------------------------------*/
+ /* Cache victim limits */
+ /*----------------------------------------------------------------*/
+ /* floors 0, ceiling max to use the entire cache -- nothing locked
+ */
+ lis r1,0x0001
+ ori r1,r1,0xf800
+ mtspr SPRN_IVLIM,r1
+ mtspr SPRN_DVLIM,r1
+
+ /*----------------------------------------------------------------+
+ |Initialize MMUCR[STID] = 0.
+ +-----------------------------------------------------------------*/
+ mfspr r0,SPRN_MMUCR
+ addis r1,0,0xFFFF
+ ori r1,r1,0xFF00
+ and r0,r0,r1
+ mtspr SPRN_MMUCR,r0
+
+ /*----------------------------------------------------------------*/
+ /* Clear all TLB entries -- TID = 0, TS = 0 */
+ /*----------------------------------------------------------------*/
+ addis r0,0,0x0000
+#ifdef CONFIG_SYS_RAMBOOT
+ li r4,0 /* Start with TLB #0 */
+#else
+ li r4,1 /* Start with TLB #1 */
+#endif
+ li r1,64 /* 64 TLB entries */
+ sub r1,r1,r4 /* calculate last TLB # */
+ mtctr r1
+rsttlb:
+#ifdef CONFIG_SYS_RAMBOOT
+ tlbre r3,r4,0 /* Read contents from TLB word #0 to get EPN */
+ rlwinm. r3,r3,0,0xfffffc00 /* Mask EPN */
+ beq tlbnxt /* Skip EPN=0 TLB, this is the SDRAM TLB */
+#endif
+ tlbwe r0,r4,0 /* Invalidate all entries (V=0)*/
+ tlbwe r0,r4,1
+ tlbwe r0,r4,2
+tlbnxt: addi r4,r4,1 /* Next TLB */
+ bdnz rsttlb
+
+ /*----------------------------------------------------------------*/
+ /* TLB entry setup -- step thru tlbtab */
+ /*----------------------------------------------------------------*/
+#if defined(CONFIG_440SPE)
+ /*----------------------------------------------------------------*/
+ /* We have different TLB tables for revA and rev B of 440SPe */
+ /*----------------------------------------------------------------*/
+ mfspr r1, PVR
+ lis r0,0x5342
+ ori r0,r0,0x1891
+ cmpw r7,r1,r0
+ bne r7,..revA
+ bl tlbtabB
+ b ..goon
+..revA:
+ bl tlbtabA
+..goon:
+#else
+ bl tlbtab /* Get tlbtab pointer */
+#endif
+ mr r5,r0
+ li r1,0x003f /* 64 TLB entries max */
+ mtctr r1
+ li r4,0 /* TLB # */
+
+ addi r5,r5,-4
+1:
+#ifdef CONFIG_SYS_RAMBOOT
+ tlbre r3,r4,0 /* Read contents from TLB word #0 */
+ rlwinm. r3,r3,0,0x00000200 /* Mask V (valid) bit */
+ bne tlbnx2 /* Skip V=1 TLB, this is the SDRAM TLB */
+#endif
+ lwzu r0,4(r5)
+ cmpwi r0,0
+ beq 2f /* 0 marks end */
+ lwzu r1,4(r5)
+ lwzu r2,4(r5)
+ tlbwe r0,r4,0 /* TLB Word 0 */
+ tlbwe r1,r4,1 /* TLB Word 1 */
+ tlbwe r2,r4,2 /* TLB Word 2 */
+tlbnx2: addi r4,r4,1 /* Next TLB */
+ bdnz 1b
+
+ /*----------------------------------------------------------------*/
+ /* Continue from 'normal' start */
+ /*----------------------------------------------------------------*/
+2:
+ bl 3f
+ b _start
+
+3: li r0,0
+ mtspr SPRN_SRR1,r0 /* Keep things disabled for now */
+ mflr r1
+ mtspr SPRN_SRR0,r1
+ rfi
+#endif /* CONFIG_440 */
+
+/*
+ * r3 - 1st arg to board_init(): IMMP pointer
+ * r4 - 2nd arg to board_init(): boot flag
+ */
+#ifndef CONFIG_NAND_SPL
+ .text
+ .long 0x27051956 /* U-Boot Magic Number */
+ .globl version_string
+version_string:
+ .ascii U_BOOT_VERSION
+ .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
+ .ascii CONFIG_IDENT_STRING, "\0"
+
+ . = EXC_OFF_SYS_RESET
+ .globl _start_of_vectors
+_start_of_vectors:
+
+/* Critical input. */
+ CRIT_EXCEPTION(0x100, CritcalInput, UnknownException)
+
+#ifdef CONFIG_440
+/* Machine check */
+ MCK_EXCEPTION(0x200, MachineCheck, MachineCheckException)
+#else
+ CRIT_EXCEPTION(0x200, MachineCheck, MachineCheckException)
+#endif /* CONFIG_440 */
+
+/* Data Storage exception. */
+ STD_EXCEPTION(0x300, DataStorage, UnknownException)
+
+/* Instruction Storage exception. */
+ STD_EXCEPTION(0x400, InstStorage, UnknownException)
+
+/* External Interrupt exception. */
+ STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
+
+/* Alignment exception. */
+ . = 0x600
+Alignment:
+ EXCEPTION_PROLOG(SRR0, SRR1)
+ mfspr r4,DAR
+ stw r4,_DAR(r21)
+ mfspr r5,DSISR
+ stw r5,_DSISR(r21)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
+
+/* Program check exception */
+ . = 0x700
+ProgramCheck:
+ EXCEPTION_PROLOG(SRR0, SRR1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
+ MSR_KERNEL, COPY_EE)
+
+#ifdef CONFIG_440
+ STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
+ STD_EXCEPTION(0x900, Decrementer, DecrementerPITException)
+ STD_EXCEPTION(0xa00, APU, UnknownException)
+#endif
+ STD_EXCEPTION(0xc00, SystemCall, UnknownException)
+
+#ifdef CONFIG_440
+ STD_EXCEPTION(0x1300, DataTLBError, UnknownException)
+ STD_EXCEPTION(0x1400, InstructionTLBError, UnknownException)
+#else
+ STD_EXCEPTION(0x1000, PIT, DecrementerPITException)
+ STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
+ STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
+#endif
+ CRIT_EXCEPTION(0x2000, DebugBreakpoint, DebugException )
+
+ .globl _end_of_vectors
+_end_of_vectors:
+ . = _START_OFFSET
+#endif
+ .globl _start
+_start:
+
+/*****************************************************************************/
+#if defined(CONFIG_440)
+
+ /*----------------------------------------------------------------*/
+ /* Clear and set up some registers. */
+ /*----------------------------------------------------------------*/
+ li r0,0x0000
+ lis r1,0xffff
+ mtspr SPRN_DEC,r0 /* prevent dec exceptions */
+ mtspr SPRN_TBWL,r0 /* prevent fit & wdt exceptions */
+ mtspr SPRN_TBWU,r0
+ mtspr SPRN_TSR,r1 /* clear all timer exception status */
+ mtspr SPRN_TCR,r0 /* disable all */
+ mtspr SPRN_ESR,r0 /* clear exception syndrome register */
+ mtxer r0 /* clear integer exception register */
+
+ /*----------------------------------------------------------------*/
+ /* Debug setup -- some (not very good) ice's need an event*/
+ /* to establish control :-( Define CONFIG_SYS_INIT_DBCR to the dbsr */
+ /* value you need in this case 0x8cff 0000 should do the trick */
+ /*----------------------------------------------------------------*/
+#if defined(CONFIG_SYS_INIT_DBCR)
+ lis r1,0xffff
+ ori r1,r1,0xffff
+ mtspr SPRN_DBSR,r1 /* Clear all status bits */
+ lis r0,CONFIG_SYS_INIT_DBCR@h
+ ori r0,r0,CONFIG_SYS_INIT_DBCR@l
+ mtspr SPRN_DBCR0,r0
+ isync
+#endif
+
+ /*----------------------------------------------------------------*/
+ /* Setup the internal SRAM */
+ /*----------------------------------------------------------------*/
+ li r0,0
+
+#ifdef CONFIG_SYS_INIT_RAM_DCACHE
+ /* Clear Dcache to use as RAM */
+ addis r3,r0,CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r3,r3,CONFIG_SYS_INIT_RAM_ADDR@l
+ addis r4,r0,CONFIG_SYS_INIT_RAM_END@h
+ ori r4,r4,CONFIG_SYS_INIT_RAM_END@l
+ rlwinm. r5,r4,0,27,31
+ rlwinm r5,r4,27,5,31
+ beq ..d_ran
+ addi r5,r5,0x0001
+..d_ran:
+ mtctr r5
+..d_ag:
+ dcbz r0,r3
+ addi r3,r3,32
+ bdnz ..d_ag
+
+ /*
+ * Lock the init-ram/stack in d-cache, so that other regions
+ * may use d-cache as well
+ * Note, that this current implementation locks exactly 4k
+ * of d-cache, so please make sure that you don't define a
+ * bigger init-ram area. Take a look at the lwmon5 440EPx
+ * implementation as a reference.
+ */
+ msync
+ isync
+ /* 8. set TFLOOR/NFLOOR to 8 (-> 8*16*32 bytes locked -> 4k) */
+ lis r1,0x0201
+ ori r1,r1,0xf808
+ mtspr SPRN_DVLIM,r1
+ lis r1,0x0808
+ ori r1,r1,0x0808
+ mtspr SPRN_DNV0,r1
+ mtspr SPRN_DNV1,r1
+ mtspr SPRN_DNV2,r1
+ mtspr SPRN_DNV3,r1
+ mtspr SPRN_DTV0,r1
+ mtspr SPRN_DTV1,r1
+ mtspr SPRN_DTV2,r1
+ mtspr SPRN_DTV3,r1
+ msync
+ isync
+#endif /* CONFIG_SYS_INIT_RAM_DCACHE */
+
+ /* 440EP & 440GR are only 440er PPC's without internal SRAM */
+#if !defined(CONFIG_440EP) && !defined(CONFIG_440GR)
+ /* not all PPC's have internal SRAM usable as L2-cache */
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460SX)
+ mtdcr L2_CACHE_CFG,r0 /* Ensure L2 Cache is off */
+#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ lis r1, 0x0000
+ ori r1,r1,0x0008 /* Set L2_CACHE_CFG[RDBW]=1 */
+ mtdcr L2_CACHE_CFG,r1
+#endif
+
+ lis r2,0x7fff
+ ori r2,r2,0xffff
+ mfdcr r1,ISRAM0_DPC
+ and r1,r1,r2 /* Disable parity check */
+ mtdcr ISRAM0_DPC,r1
+ mfdcr r1,ISRAM0_PMEG
+ and r1,r1,r2 /* Disable pwr mgmt */
+ mtdcr ISRAM0_PMEG,r1
+
+ lis r1,0x8000 /* BAS = 8000_0000 */
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
+ ori r1,r1,0x0980 /* first 64k */
+ mtdcr ISRAM0_SB0CR,r1
+ lis r1,0x8001
+ ori r1,r1,0x0980 /* second 64k */
+ mtdcr ISRAM0_SB1CR,r1
+ lis r1, 0x8002
+ ori r1,r1, 0x0980 /* third 64k */
+ mtdcr ISRAM0_SB2CR,r1
+ lis r1, 0x8003
+ ori r1,r1, 0x0980 /* fourth 64k */
+ mtdcr ISRAM0_SB3CR,r1
+#elif defined(CONFIG_440SPE) || defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ lis r1,0x0000 /* BAS = X_0000_0000 */
+ ori r1,r1,0x0984 /* first 64k */
+ mtdcr ISRAM0_SB0CR,r1
+ lis r1,0x0001
+ ori r1,r1,0x0984 /* second 64k */
+ mtdcr ISRAM0_SB1CR,r1
+ lis r1, 0x0002
+ ori r1,r1, 0x0984 /* third 64k */
+ mtdcr ISRAM0_SB2CR,r1
+ lis r1, 0x0003
+ ori r1,r1, 0x0984 /* fourth 64k */
+ mtdcr ISRAM0_SB3CR,r1
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ lis r2,0x7fff
+ ori r2,r2,0xffff
+ mfdcr r1,ISRAM1_DPC
+ and r1,r1,r2 /* Disable parity check */
+ mtdcr ISRAM1_DPC,r1
+ mfdcr r1,ISRAM1_PMEG
+ and r1,r1,r2 /* Disable pwr mgmt */
+ mtdcr ISRAM1_PMEG,r1
+
+ lis r1,0x0004 /* BAS = 4_0004_0000 */
+ ori r1,r1,0x0984 /* 64k */
+ mtdcr ISRAM1_SB0CR,r1
+#endif
+#elif defined(CONFIG_460SX)
+ lis r1,0x0000 /* BAS = 0000_0000 */
+ ori r1,r1,0x0B84 /* first 128k */
+ mtdcr ISRAM0_SB0CR,r1
+ lis r1,0x0001
+ ori r1,r1,0x0B84 /* second 128k */
+ mtdcr ISRAM0_SB1CR,r1
+ lis r1, 0x0002
+ ori r1,r1, 0x0B84 /* third 128k */
+ mtdcr ISRAM0_SB2CR,r1
+ lis r1, 0x0003
+ ori r1,r1, 0x0B84 /* fourth 128k */
+ mtdcr ISRAM0_SB3CR,r1
+#elif defined(CONFIG_440GP)
+ ori r1,r1,0x0380 /* 8k rw */
+ mtdcr ISRAM0_SB0CR,r1
+ mtdcr ISRAM0_SB1CR,r0 /* Disable bank 1 */
+#endif
+#endif /* #if !defined(CONFIG_440EP) && !defined(CONFIG_440GR) */
+
+ /*----------------------------------------------------------------*/
+ /* Setup the stack in internal SRAM */
+ /*----------------------------------------------------------------*/
+ lis r1,CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET@l
+ li r0,0
+ stwu r0,-4(r1)
+ stwu r0,-4(r1) /* Terminate call chain */
+
+ stwu r1,-8(r1) /* Save back chain and move SP */
+ lis r0,RESET_VECTOR@h /* Address of reset vector */
+ ori r0,r0, RESET_VECTOR@l
+ stwu r1,-8(r1) /* Save back chain and move SP */
+ stw r0,+12(r1) /* Save return addr (underflow vect) */
+
+#ifdef CONFIG_NAND_SPL
+ bl nand_boot_common /* will not return */
+#else
+ GET_GOT
+
+ bl cpu_init_f /* run low-level CPU init code (from Flash) */
+ bl board_init_f
+#endif
+
+#endif /* CONFIG_440 */
+
+/*****************************************************************************/
+#ifdef CONFIG_IOP480
+ /*----------------------------------------------------------------------- */
+ /* Set up some machine state registers. */
+ /*----------------------------------------------------------------------- */
+ addi r0,r0,0x0000 /* initialize r0 to zero */
+ mtspr SPRN_ESR,r0 /* clear Exception Syndrome Reg */
+ mttcr r0 /* timer control register */
+ mtexier r0 /* disable all interrupts */
+ addis r4,r0,0xFFFF /* set r4 to 0xFFFFFFFF (status in the */
+ ori r4,r4,0xFFFF /* dbsr is cleared by setting bits to 1) */
+ mtdbsr r4 /* clear/reset the dbsr */
+ mtexisr r4 /* clear all pending interrupts */
+ addis r4,r0,0x8000
+ mtexier r4 /* enable critical exceptions */
+ addis r4,r0,0x0000 /* assume 403GCX - enable core clk */
+ ori r4,r4,0x4020 /* dbling (no harm done on GA and GC */
+ mtiocr r4 /* since bit not used) & DRC to latch */
+ /* data bus on rising edge of CAS */
+ /*----------------------------------------------------------------------- */
+ /* Clear XER. */
+ /*----------------------------------------------------------------------- */
+ mtxer r0
+ /*----------------------------------------------------------------------- */
+ /* Invalidate i-cache and d-cache TAG arrays. */
+ /*----------------------------------------------------------------------- */
+ addi r3,0,1024 /* 1/4 of I-cache size, half of D-cache */
+ addi r4,0,1024 /* 1/4 of I-cache */
+..cloop:
+ iccci 0,r3
+ iccci r4,r3
+ dccci 0,r3
+ addic. r3,r3,-16 /* move back one cache line */
+ bne ..cloop /* loop back to do rest until r3 = 0 */
+
+ /* */
+ /* initialize IOP480 so it can read 1 MB code area for SRAM spaces */
+ /* this requires enabling MA[17..0], by default only MA[12..0] are enabled. */
+ /* */
+
+ /* first copy IOP480 register base address into r3 */
+ addis r3,0,0x5000 /* IOP480 register base address hi */
+/* ori r3,r3,0x0000 / IOP480 register base address lo */
+
+#ifdef CONFIG_ADCIOP
+ /* use r4 as the working variable */
+ /* turn on CS3 (LOCCTL.7) */
+ lwz r4,0x84(r3) /* LOCTL is at offset 0x84 */
+ andi. r4,r4,0xff7f /* make bit 7 = 0 -- CS3 mode */
+ stw r4,0x84(r3) /* LOCTL is at offset 0x84 */
+#endif
+
+#ifdef CONFIG_DASA_SIM
+ /* use r4 as the working variable */
+ /* turn on MA17 (LOCCTL.7) */
+ lwz r4,0x84(r3) /* LOCTL is at offset 0x84 */
+ ori r4,r4,0x80 /* make bit 7 = 1 -- MA17 mode */
+ stw r4,0x84(r3) /* LOCTL is at offset 0x84 */
+#endif
+
+ /* turn on MA16..13 (LCS0BRD.12 = 0) */
+ lwz r4,0x100(r3) /* LCS0BRD is at offset 0x100 */
+ andi. r4,r4,0xefff /* make bit 12 = 0 */
+ stw r4,0x100(r3) /* LCS0BRD is at offset 0x100 */
+
+ /* make sure above stores all comlete before going on */
+ sync
+
+ /* last thing, set local init status done bit (DEVINIT.31) */
+ lwz r4,0x80(r3) /* DEVINIT is at offset 0x80 */
+ oris r4,r4,0x8000 /* make bit 31 = 1 */
+ stw r4,0x80(r3) /* DEVINIT is at offset 0x80 */
+
+ /* clear all pending interrupts and disable all interrupts */
+ li r4,-1 /* set p1 to 0xffffffff */
+ stw r4,0x1b0(r3) /* clear all pending interrupts */
+ stw r4,0x1b8(r3) /* clear all pending interrupts */
+ li r4,0 /* set r4 to 0 */
+ stw r4,0x1b4(r3) /* disable all interrupts */
+ stw r4,0x1bc(r3) /* disable all interrupts */
+
+ /* make sure above stores all comlete before going on */
+ sync
+
+ /* Set-up icache cacheability. */
+ lis r1, CONFIG_SYS_ICACHE_SACR_VALUE@h
+ ori r1, r1, CONFIG_SYS_ICACHE_SACR_VALUE@l
+ mticcr r1
+ isync
+
+ /* Set-up dcache cacheability. */
+ lis r1, CONFIG_SYS_DCACHE_SACR_VALUE@h
+ ori r1, r1, CONFIG_SYS_DCACHE_SACR_VALUE@l
+ mtdccr r1
+
+ addis r1,r0,CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET /* set up the stack to SDRAM */
+ li r0, 0 /* Make room for stack frame header and */
+ stwu r0, -4(r1) /* clear final stack frame so that */
+ stwu r0, -4(r1) /* stack backtraces terminate cleanly */
+
+ GET_GOT /* initialize GOT access */
+
+ bl board_init_f /* run first part of init code (from Flash) */
+
+#endif /* CONFIG_IOP480 */
+
+/*****************************************************************************/
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
+ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
+ defined(CONFIG_405EX) || defined(CONFIG_405)
+ /*----------------------------------------------------------------------- */
+ /* Clear and set up some registers. */
+ /*----------------------------------------------------------------------- */
+ addi r4,r0,0x0000
+#if !defined(CONFIG_405EX)
+ mtspr SPRN_SGR,r4
+#else
+ /*
+ * On 405EX, completely clearing the SGR leads to PPC hangup
+ * upon PCIe configuration access. The PCIe memory regions
+ * need to be guarded!
+ */
+ lis r3,0x0000
+ ori r3,r3,0x7FFC
+ mtspr SPRN_SGR,r3
+#endif
+ mtspr SPRN_DCWR,r4
+ mtesr r4 /* clear Exception Syndrome Reg */
+ mttcr r4 /* clear Timer Control Reg */
+ mtxer r4 /* clear Fixed-Point Exception Reg */
+ mtevpr r4 /* clear Exception Vector Prefix Reg */
+ addi r4,r0,(0xFFFF-0x10000) /* set r4 to 0xFFFFFFFF (status in the */
+ /* dbsr is cleared by setting bits to 1) */
+ mtdbsr r4 /* clear/reset the dbsr */
+
+ /* Invalidate the i- and d-caches. */
+ bl invalidate_icache
+ bl invalidate_dcache
+
+ /* Set-up icache cacheability. */
+ lis r4, CONFIG_SYS_ICACHE_SACR_VALUE@h
+ ori r4, r4, CONFIG_SYS_ICACHE_SACR_VALUE@l
+ mticcr r4
+ isync
+
+ /* Set-up dcache cacheability. */
+ lis r4, CONFIG_SYS_DCACHE_SACR_VALUE@h
+ ori r4, r4, CONFIG_SYS_DCACHE_SACR_VALUE@l
+ mtdccr r4
+
+#if !(defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))\
+ && !defined (CONFIG_XILINX_405)
+ /*----------------------------------------------------------------------- */
+ /* Tune the speed and size for flash CS0 */
+ /*----------------------------------------------------------------------- */
+ bl ext_bus_cntlr_init
+#endif
+
+#if !(defined(CONFIG_SYS_INIT_DCACHE_CS) || defined(CONFIG_SYS_TEMP_STACK_OCM))
+ /*
+ * For boards that don't have OCM and can't use the data cache
+ * for their primordial stack, setup stack here directly after the
+ * SDRAM is initialized in ext_bus_cntlr_init.
+ */
+ lis r1, CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET /* set up the stack in SDRAM */
+
+ li r0, 0 /* Make room for stack frame header and */
+ stwu r0, -4(r1) /* clear final stack frame so that */
+ stwu r0, -4(r1) /* stack backtraces terminate cleanly */
+ /*
+ * Set up a dummy frame to store reset vector as return address.
+ * this causes stack underflow to reset board.
+ */
+ stwu r1, -8(r1) /* Save back chain and move SP */
+ lis r0, RESET_VECTOR@h /* Address of reset vector */
+ ori r0, r0, RESET_VECTOR@l
+ stwu r1, -8(r1) /* Save back chain and move SP */
+ stw r0, +12(r1) /* Save return addr (underflow vect) */
+#endif /* !(CONFIG_SYS_INIT_DCACHE_CS || !CONFIG_SYS_TEM_STACK_OCM) */
+
+#if defined(CONFIG_405EP)
+ /*----------------------------------------------------------------------- */
+ /* DMA Status, clear to come up clean */
+ /*----------------------------------------------------------------------- */
+ addis r3,r0, 0xFFFF /* Clear all existing DMA status */
+ ori r3,r3, 0xFFFF
+ mtdcr DMASR, r3
+
+ bl ppc405ep_init /* do ppc405ep specific init */
+#endif /* CONFIG_405EP */
+
+#if defined(CONFIG_SYS_OCM_DATA_ADDR) && defined(CONFIG_SYS_OCM_DATA_SIZE)
+#if defined(CONFIG_405EZ)
+ /********************************************************************
+ * Setup OCM - On Chip Memory - PPC405EZ uses OCM Controller V2
+ *******************************************************************/
+ /*
+ * We can map the OCM on the PLB3, so map it at
+ * CONFIG_SYS_OCM_DATA_ADDR + 0x8000
+ */
+ lis r3,CONFIG_SYS_OCM_DATA_ADDR@h /* OCM location */
+ ori r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l
+ ori r3,r3,0x0270 /* 16K for Bank 1, R/W/Enable */
+ mtdcr OCM0_PLBCR1,r3 /* Set PLB Access */
+ ori r3,r3,0x4000 /* Add 0x4000 for bank 2 */
+ mtdcr OCM0_PLBCR2,r3 /* Set PLB Access */
+ isync
+
+ lis r3,CONFIG_SYS_OCM_DATA_ADDR@h /* OCM location */
+ ori r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l
+ ori r3,r3,0x0270 /* 16K for Bank 1, R/W/Enable */
+ mtdcr OCM0_DSRC1, r3 /* Set Data Side */
+ mtdcr OCM0_ISRC1, r3 /* Set Instruction Side */
+ ori r3,r3,0x4000 /* Add 0x4000 for bank 2 */
+ mtdcr OCM0_DSRC2, r3 /* Set Data Side */
+ mtdcr OCM0_ISRC2, r3 /* Set Instruction Side */
+ addis r3,0,0x0800 /* OCM Data Parity Disable - 1 Wait State */
+ mtdcr OCM0_DISDPC,r3
+
+ isync
+#else /* CONFIG_405EZ */
+ /********************************************************************
+ * Setup OCM - On Chip Memory
+ *******************************************************************/
+ /* Setup OCM */
+ lis r0, 0x7FFF
+ ori r0, r0, 0xFFFF
+ mfdcr r3, OCM0_ISCNTL /* get instr-side IRAM config */
+ mfdcr r4, OCM0_DSCNTL /* get data-side IRAM config */
+ and r3, r3, r0 /* disable data-side IRAM */
+ and r4, r4, r0 /* disable data-side IRAM */
+ mtdcr OCM0_ISCNTL, r3 /* set instr-side IRAM config */
+ mtdcr OCM0_DSCNTL, r4 /* set data-side IRAM config */
+ isync
+
+ lis r3,CONFIG_SYS_OCM_DATA_ADDR@h /* OCM location */
+ ori r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l
+ mtdcr OCM0_DSARC, r3
+ addis r4, 0, 0xC000 /* OCM data area enabled */
+ mtdcr OCM0_DSCNTL, r4
+ isync
+#endif /* CONFIG_405EZ */
+#endif
+
+ /*----------------------------------------------------------------------- */
+ /* Setup temporary stack in DCACHE or OCM if needed for SDRAM SPD. */
+ /*----------------------------------------------------------------------- */
+#ifdef CONFIG_SYS_INIT_DCACHE_CS
+ li r4, PBxAP
+ mtdcr EBC0_CFGADDR, r4
+ lis r4, CONFIG_SYS_INIT_DCACHE_PBxAR@h
+ ori r4, r4, CONFIG_SYS_INIT_DCACHE_PBxAR@l
+ mtdcr EBC0_CFGDATA, r4
+
+ addi r4, 0, PBxCR
+ mtdcr EBC0_CFGADDR, r4
+ lis r4, CONFIG_SYS_INIT_DCACHE_PBxCR@h
+ ori r4, r4, CONFIG_SYS_INIT_DCACHE_PBxCR@l
+ mtdcr EBC0_CFGDATA, r4
+
+ /*
+ * Enable the data cache for the 128MB storage access control region
+ * at CONFIG_SYS_INIT_RAM_ADDR.
+ */
+ mfdccr r4
+ oris r4, r4, PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@h
+ ori r4, r4, PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@l
+ mtdccr r4
+
+ /*
+ * Preallocate data cache lines to be used to avoid a subsequent
+ * cache miss and an ensuing machine check exception when exceptions
+ * are enabled.
+ */
+ li r0, 0
+
+ lis r3, CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
+
+ lis r4, CONFIG_SYS_INIT_RAM_END@h
+ ori r4, r4, CONFIG_SYS_INIT_RAM_END@l
+
+ /*
+ * Convert the size, in bytes, to the number of cache lines/blocks
+ * to preallocate.
+ */
+ clrlwi. r5, r4, (32 - L1_CACHE_SHIFT)
+ srwi r5, r4, L1_CACHE_SHIFT
+ beq ..load_counter
+ addi r5, r5, 0x0001
+..load_counter:
+ mtctr r5
+
+ /* Preallocate the computed number of cache blocks. */
+..alloc_dcache_block:
+ dcba r0, r3
+ addi r3, r3, L1_CACHE_BYTES
+ bdnz ..alloc_dcache_block
+ sync
+
+ /*
+ * Load the initial stack pointer and data area and convert the size,
+ * in bytes, to the number of words to initialize to a known value.
+ */
+ lis r1, CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r1, r1, CONFIG_SYS_INIT_SP_OFFSET@l
+
+ lis r4, (CONFIG_SYS_INIT_RAM_END >> 2)@h
+ ori r4, r4, (CONFIG_SYS_INIT_RAM_END >> 2)@l
+ mtctr r4
+
+ lis r2, CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r2, r2, CONFIG_SYS_INIT_RAM_END@l
+
+ lis r4, CONFIG_SYS_INIT_RAM_PATTERN@h
+ ori r4, r4, CONFIG_SYS_INIT_RAM_PATTERN@l
+
+..stackloop:
+ stwu r4, -4(r2)
+ bdnz ..stackloop
+
+ /*
+ * Make room for stack frame header and clear final stack frame so
+ * that stack backtraces terminate cleanly.
+ */
+ stwu r0, -4(r1)
+ stwu r0, -4(r1)
+
+ /*
+ * Set up a dummy frame to store reset vector as return address.
+ * this causes stack underflow to reset board.
+ */
+ stwu r1, -8(r1) /* Save back chain and move SP */
+ addis r0, 0, RESET_VECTOR@h /* Address of reset vector */
+ ori r0, r0, RESET_VECTOR@l
+ stwu r1, -8(r1) /* Save back chain and move SP */
+ stw r0, +12(r1) /* Save return addr (underflow vect) */
+
+#elif defined(CONFIG_SYS_TEMP_STACK_OCM) && \
+ (defined(CONFIG_SYS_OCM_DATA_ADDR) && defined(CONFIG_SYS_OCM_DATA_SIZE))
+ /*
+ * Stack in OCM.
+ */
+
+ /* Set up Stack at top of OCM */
+ lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)@h
+ ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)@l
+
+ /* Set up a zeroized stack frame so that backtrace works right */
+ li r0, 0
+ stwu r0, -4(r1)
+ stwu r0, -4(r1)
+
+ /*
+ * Set up a dummy frame to store reset vector as return address.
+ * this causes stack underflow to reset board.
+ */
+ stwu r1, -8(r1) /* Save back chain and move SP */
+ lis r0, RESET_VECTOR@h /* Address of reset vector */
+ ori r0, r0, RESET_VECTOR@l
+ stwu r1, -8(r1) /* Save back chain and move SP */
+ stw r0, +12(r1) /* Save return addr (underflow vect) */
+#endif /* CONFIG_SYS_INIT_DCACHE_CS */
+
+#ifdef CONFIG_NAND_SPL
+ bl nand_boot_common /* will not return */
+#else
+ GET_GOT /* initialize GOT access */
+
+ bl cpu_init_f /* run low-level CPU init code (from Flash) */
+
+ /* NEVER RETURNS! */
+ bl board_init_f /* run first part of init code (from Flash) */
+#endif /* CONFIG_NAND_SPL */
+
+#endif /* CONFIG_405GP || CONFIG_405CR || CONFIG_405 || CONFIG_405EP */
+ /*----------------------------------------------------------------------- */
+
+
+#ifndef CONFIG_NAND_SPL
+/*
+ * This code finishes saving the registers to the exception frame
+ * and jumps to the appropriate handler for the exception.
+ * Register r21 is pointer into trap frame, r1 has new stack pointer.
+ */
+ .globl transfer_to_handler
+transfer_to_handler:
+ stw r22,_NIP(r21)
+ lis r22,MSR_POW@h
+ andc r23,r23,r22
+ stw r23,_MSR(r21)
+ SAVE_GPR(7, r21)
+ SAVE_4GPRS(8, r21)
+ SAVE_8GPRS(12, r21)
+ SAVE_8GPRS(24, r21)
+ mflr r23
+ andi. r24,r23,0x3f00 /* get vector offset */
+ stw r24,TRAP(r21)
+ li r22,0
+ stw r22,RESULT(r21)
+ mtspr SPRG2,r22 /* r1 is now kernel sp */
+ lwz r24,0(r23) /* virtual address of handler */
+ lwz r23,4(r23) /* where to go when done */
+ mtspr SRR0,r24
+ mtspr SRR1,r20
+ mtlr r23
+ SYNC
+ rfi /* jump to handler, enable MMU */
+
+int_return:
+ mfmsr r28 /* Disable interrupts */
+ li r4,0
+ ori r4,r4,MSR_EE
+ andc r28,r28,r4
+ SYNC /* Some chip revs need this... */
+ mtmsr r28
+ SYNC
+ lwz r2,_CTR(r1)
+ lwz r0,_LINK(r1)
+ mtctr r2
+ mtlr r0
+ lwz r2,_XER(r1)
+ lwz r0,_CCR(r1)
+ mtspr XER,r2
+ mtcrf 0xFF,r0
+ REST_10GPRS(3, r1)
+ REST_10GPRS(13, r1)
+ REST_8GPRS(23, r1)
+ REST_GPR(31, r1)
+ lwz r2,_NIP(r1) /* Restore environment */
+ lwz r0,_MSR(r1)
+ mtspr SRR0,r2
+ mtspr SRR1,r0
+ lwz r0,GPR0(r1)
+ lwz r2,GPR2(r1)
+ lwz r1,GPR1(r1)
+ SYNC
+ rfi
+
+crit_return:
+ mfmsr r28 /* Disable interrupts */
+ li r4,0
+ ori r4,r4,MSR_EE
+ andc r28,r28,r4
+ SYNC /* Some chip revs need this... */
+ mtmsr r28
+ SYNC
+ lwz r2,_CTR(r1)
+ lwz r0,_LINK(r1)
+ mtctr r2
+ mtlr r0
+ lwz r2,_XER(r1)
+ lwz r0,_CCR(r1)
+ mtspr XER,r2
+ mtcrf 0xFF,r0
+ REST_10GPRS(3, r1)
+ REST_10GPRS(13, r1)
+ REST_8GPRS(23, r1)
+ REST_GPR(31, r1)
+ lwz r2,_NIP(r1) /* Restore environment */
+ lwz r0,_MSR(r1)
+ mtspr SPRN_CSRR0,r2
+ mtspr SPRN_CSRR1,r0
+ lwz r0,GPR0(r1)
+ lwz r2,GPR2(r1)
+ lwz r1,GPR1(r1)
+ SYNC
+ rfci
+
+#ifdef CONFIG_440
+mck_return:
+ mfmsr r28 /* Disable interrupts */
+ li r4,0
+ ori r4,r4,MSR_EE
+ andc r28,r28,r4
+ SYNC /* Some chip revs need this... */
+ mtmsr r28
+ SYNC
+ lwz r2,_CTR(r1)
+ lwz r0,_LINK(r1)
+ mtctr r2
+ mtlr r0
+ lwz r2,_XER(r1)
+ lwz r0,_CCR(r1)
+ mtspr XER,r2
+ mtcrf 0xFF,r0
+ REST_10GPRS(3, r1)
+ REST_10GPRS(13, r1)
+ REST_8GPRS(23, r1)
+ REST_GPR(31, r1)
+ lwz r2,_NIP(r1) /* Restore environment */
+ lwz r0,_MSR(r1)
+ mtspr SPRN_MCSRR0,r2
+ mtspr SPRN_MCSRR1,r0
+ lwz r0,GPR0(r1)
+ lwz r2,GPR2(r1)
+ lwz r1,GPR1(r1)
+ SYNC
+ rfmci
+#endif /* CONFIG_440 */
+
+
+ .globl get_pvr
+get_pvr:
+ mfspr r3, PVR
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: out16 */
+/* Description: Output 16 bits */
+/*------------------------------------------------------------------------------- */
+ .globl out16
+out16:
+ sth r4,0x0000(r3)
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: out16r */
+/* Description: Byte reverse and output 16 bits */
+/*------------------------------------------------------------------------------- */
+ .globl out16r
+out16r:
+ sthbrx r4,r0,r3
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: out32r */
+/* Description: Byte reverse and output 32 bits */
+/*------------------------------------------------------------------------------- */
+ .globl out32r
+out32r:
+ stwbrx r4,r0,r3
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: in16 */
+/* Description: Input 16 bits */
+/*------------------------------------------------------------------------------- */
+ .globl in16
+in16:
+ lhz r3,0x0000(r3)
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: in16r */
+/* Description: Input 16 bits and byte reverse */
+/*------------------------------------------------------------------------------- */
+ .globl in16r
+in16r:
+ lhbrx r3,r0,r3
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: in32r */
+/* Description: Input 32 bits and byte reverse */
+/*------------------------------------------------------------------------------- */
+ .globl in32r
+in32r:
+ lwbrx r3,r0,r3
+ blr
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * r3 = Relocated stack pointer
+ * r4 = Relocated global data pointer
+ * r5 = Relocated text pointer
+ */
+ .globl relocate_code
+relocate_code:
+#if defined(CONFIG_4xx_DCACHE) || defined(CONFIG_SYS_INIT_DCACHE_CS)
+ /*
+ * We need to flush the initial global data (gd_t) before the dcache
+ * will be invalidated.
+ */
+
+ /* Save registers */
+ mr r9, r3
+ mr r10, r4
+ mr r11, r5
+
+ /* Flush initial global data range */
+ mr r3, r4
+ addi r4, r4, CONFIG_SYS_GBL_DATA_SIZE@l
+ bl flush_dcache_range
+
+#if defined(CONFIG_SYS_INIT_DCACHE_CS)
+ /*
+ * Undo the earlier data cache set-up for the primordial stack and
+ * data area. First, invalidate the data cache and then disable data
+ * cacheability for that area. Finally, restore the EBC values, if
+ * any.
+ */
+
+ /* Invalidate the primordial stack and data area in cache */
+ lis r3, CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
+
+ lis r4, CONFIG_SYS_INIT_RAM_END@h
+ ori r4, r4, CONFIG_SYS_INIT_RAM_END@l
+ add r4, r4, r3
+
+ bl invalidate_dcache_range
+
+ /* Disable cacheability for the region */
+ mfdccr r3
+ lis r4, ~PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@h
+ ori r4, r4, ~PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@l
+ and r3, r3, r4
+ mtdccr r3
+
+ /* Restore the EBC parameters */
+ li r3, PBxAP
+ mtdcr EBC0_CFGADDR, r3
+ lis r3, PBxAP_VAL@h
+ ori r3, r3, PBxAP_VAL@l
+ mtdcr EBC0_CFGDATA, r3
+
+ li r3, PBxCR
+ mtdcr EBC0_CFGADDR, r3
+ lis r3, PBxCR_VAL@h
+ ori r3, r3, PBxCR_VAL@l
+ mtdcr EBC0_CFGDATA, r3
+#endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */
+
+ /* Restore registers */
+ mr r3, r9
+ mr r4, r10
+ mr r5, r11
+#endif /* defined(CONFIG_4xx_DCACHE) || defined(CONFIG_SYS_INIT_DCACHE_CS) */
+
+#ifdef CONFIG_SYS_INIT_RAM_DCACHE
+ /*
+ * Unlock the previously locked d-cache
+ */
+ msync
+ isync
+ /* set TFLOOR/NFLOOR to 0 again */
+ lis r6,0x0001
+ ori r6,r6,0xf800
+ mtspr SPRN_DVLIM,r6
+ lis r6,0x0000
+ ori r6,r6,0x0000
+ mtspr SPRN_DNV0,r6
+ mtspr SPRN_DNV1,r6
+ mtspr SPRN_DNV2,r6
+ mtspr SPRN_DNV3,r6
+ mtspr SPRN_DTV0,r6
+ mtspr SPRN_DTV1,r6
+ mtspr SPRN_DTV2,r6
+ mtspr SPRN_DTV3,r6
+ msync
+ isync
+#endif /* CONFIG_SYS_INIT_RAM_DCACHE */
+
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+ defined(CONFIG_460SX)
+ /*
+ * On some 440er platforms the cache is enabled in the first TLB (Boot-CS)
+ * to speed up the boot process. Now this cache needs to be disabled.
+ */
+ iccci 0,0 /* Invalidate inst cache */
+ dccci 0,0 /* Invalidate data cache, now no longer our stack */
+ sync
+ isync
+
+ /* Clear all potential pending exceptions */
+ mfspr r1,SPRN_MCSR
+ mtspr SPRN_MCSR,r1
+#ifdef CONFIG_SYS_TLB_FOR_BOOT_FLASH
+ addi r1,r0,CONFIG_SYS_TLB_FOR_BOOT_FLASH /* Use defined TLB */
+#else
+ addi r1,r0,0x0000 /* Default TLB entry is #0 */
+#endif /* CONFIG_SYS_TLB_FOR_BOOT_FLASH */
+ tlbre r0,r1,0x0002 /* Read contents */
+ ori r0,r0,0x0c00 /* Or in the inhibit, write through bit */
+ tlbwe r0,r1,0x0002 /* Save it out */
+ sync
+ isync
+#endif /* defined(CONFIG_440EP) || ... || defined(CONFIG_460GT) */
+ mr r1, r3 /* Set new stack pointer */
+ mr r9, r4 /* Save copy of Init Data pointer */
+ mr r10, r5 /* Save copy of Destination Address */
+
+ GET_GOT
+ mr r3, r5 /* Destination Address */
+ lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
+ ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
+ lwz r5, GOT(__init_end)
+ sub r5, r5, r4
+ li r6, L1_CACHE_BYTES /* Cache Line Size */
+
+ /*
+ * Fix GOT pointer:
+ *
+ * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
+ *
+ * Offset:
+ */
+ sub r15, r10, r4
+
+ /* First our own GOT */
+ add r12, r12, r15
+ /* then the one used by the C code */
+ add r30, r30, r15
+
+ /*
+ * Now relocate code
+ */
+
+ cmplw cr1,r3,r4
+ addi r0,r5,3
+ srwi. r0,r0,2
+ beq cr1,4f /* In place copy is not necessary */
+ beq 7f /* Protect against 0 count */
+ mtctr r0
+ bge cr1,2f
+
+ la r8,-4(r4)
+ la r7,-4(r3)
+1: lwzu r0,4(r8)
+ stwu r0,4(r7)
+ bdnz 1b
+ b 4f
+
+2: slwi r0,r0,2
+ add r8,r4,r0
+ add r7,r3,r0
+3: lwzu r0,-4(r8)
+ stwu r0,-4(r7)
+ bdnz 3b
+
+/*
+ * Now flush the cache: note that we must start from a cache aligned
+ * address. Otherwise we might miss one cache line.
+ */
+4: cmpwi r6,0
+ add r5,r3,r5
+ beq 7f /* Always flush prefetch queue in any case */
+ subi r0,r6,1
+ andc r3,r3,r0
+ mr r4,r3
+5: dcbst 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 5b
+ sync /* Wait for all dcbst to complete on bus */
+ mr r4,r3
+6: icbi 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 6b
+7: sync /* Wait for all icbi to complete on bus */
+ isync
+
+/*
+ * We are done. Do not return, instead branch to second part of board
+ * initialization, now running from RAM.
+ */
+
+ addi r0, r10, in_ram - _start + _START_OFFSET
+ mtlr r0
+ blr /* NEVER RETURNS! */
+
+in_ram:
+
+ /*
+ * Relocation Function, r12 point to got2+0x8000
+ *
+ * Adjust got2 pointers, no need to check for 0, this code
+ * already puts a few entries in the table.
+ */
+ li r0,__got2_entries@sectoff@l
+ la r3,GOT(_GOT2_TABLE_)
+ lwz r11,GOT(_GOT2_TABLE_)
+ mtctr r0
+ sub r11,r3,r11
+ addi r3,r3,-4
+1: lwzu r0,4(r3)
+ cmpwi r0,0
+ beq- 2f
+ add r0,r0,r11
+ stw r0,0(r3)
+2: bdnz 1b
+
+ /*
+ * Now adjust the fixups and the pointers to the fixups
+ * in case we need to move ourselves again.
+ */
+ li r0,__fixup_entries@sectoff@l
+ lwz r3,GOT(_FIXUP_TABLE_)
+ cmpwi r0,0
+ mtctr r0
+ addi r3,r3,-4
+ beq 4f
+3: lwzu r4,4(r3)
+ lwzux r0,r4,r11
+ add r0,r0,r11
+ stw r10,0(r3)
+ stw r0,0(r4)
+ bdnz 3b
+4:
+clear_bss:
+ /*
+ * Now clear BSS segment
+ */
+ lwz r3,GOT(__bss_start)
+ lwz r4,GOT(_end)
+
+ cmplw 0, r3, r4
+ beq 7f
+
+ li r0, 0
+
+ andi. r5, r4, 3
+ beq 6f
+ sub r4, r4, r5
+ mtctr r5
+ mr r5, r4
+5: stb r0, 0(r5)
+ addi r5, r5, 1
+ bdnz 5b
+6:
+ stw r0, 0(r3)
+ addi r3, r3, 4
+ cmplw 0, r3, r4
+ bne 6b
+
+7:
+ mr r3, r9 /* Init Data pointer */
+ mr r4, r10 /* Destination Address */
+ bl board_init_r
+
+ /*
+ * Copy exception vector code to low memory
+ *
+ * r3: dest_addr
+ * r7: source address, r8: end address, r9: target address
+ */
+ .globl trap_init
+trap_init:
+ mflr r4 /* save link register */
+ GET_GOT
+ lwz r7, GOT(_start_of_vectors)
+ lwz r8, GOT(_end_of_vectors)
+
+ li r9, 0x100 /* reset vector always at 0x100 */
+
+ cmplw 0, r7, r8
+ bgelr /* return if r7>=r8 - just in case */
+1:
+ lwz r0, 0(r7)
+ stw r0, 0(r9)
+ addi r7, r7, 4
+ addi r9, r9, 4
+ cmplw 0, r7, r8
+ bne 1b
+
+ /*
+ * relocate `hdlr' and `int_return' entries
+ */
+ li r7, .L_MachineCheck - _start + _START_OFFSET
+ li r8, Alignment - _start + _START_OFFSET
+2:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 2b
+
+ li r7, .L_Alignment - _start + _START_OFFSET
+ bl trap_reloc
+
+ li r7, .L_ProgramCheck - _start + _START_OFFSET
+ bl trap_reloc
+
+#ifdef CONFIG_440
+ li r7, .L_FPUnavailable - _start + _START_OFFSET
+ bl trap_reloc
+
+ li r7, .L_Decrementer - _start + _START_OFFSET
+ bl trap_reloc
+
+ li r7, .L_APU - _start + _START_OFFSET
+ bl trap_reloc
+
+ li r7, .L_InstructionTLBError - _start + _START_OFFSET
+ bl trap_reloc
+
+ li r7, .L_DataTLBError - _start + _START_OFFSET
+ bl trap_reloc
+#else /* CONFIG_440 */
+ li r7, .L_PIT - _start + _START_OFFSET
+ bl trap_reloc
+
+ li r7, .L_InstructionTLBMiss - _start + _START_OFFSET
+ bl trap_reloc
+
+ li r7, .L_DataTLBMiss - _start + _START_OFFSET
+ bl trap_reloc
+#endif /* CONFIG_440 */
+
+ li r7, .L_DebugBreakpoint - _start + _START_OFFSET
+ bl trap_reloc
+
+#if !defined(CONFIG_440)
+ addi r7,r0,0x1000 /* set ME bit (Machine Exceptions) */
+ oris r7,r7,0x0002 /* set CE bit (Critical Exceptions) */
+ mtmsr r7 /* change MSR */
+#else
+ bl __440_msr_set
+ b __440_msr_continue
+
+__440_msr_set:
+ addi r7,r0,0x1000 /* set ME bit (Machine Exceptions) */
+ oris r7,r7,0x0002 /* set CE bit (Critical Exceptions) */
+ mtspr SPRN_SRR1,r7
+ mflr r7
+ mtspr SPRN_SRR0,r7
+ rfi
+__440_msr_continue:
+#endif
+
+ mtlr r4 /* restore link register */
+ blr
+
+#if defined(CONFIG_440)
+/*----------------------------------------------------------------------------+
+| dcbz_area.
++----------------------------------------------------------------------------*/
+ function_prolog(dcbz_area)
+ rlwinm. r5,r4,0,27,31
+ rlwinm r5,r4,27,5,31
+ beq ..d_ra2
+ addi r5,r5,0x0001
+..d_ra2:mtctr r5
+..d_ag2:dcbz r0,r3
+ addi r3,r3,32
+ bdnz ..d_ag2
+ sync
+ blr
+ function_epilog(dcbz_area)
+#endif /* CONFIG_440 */
+#endif /* CONFIG_NAND_SPL */
+
+/*------------------------------------------------------------------------------- */
+/* Function: in8 */
+/* Description: Input 8 bits */
+/*------------------------------------------------------------------------------- */
+ .globl in8
+in8:
+ lbz r3,0x0000(r3)
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: out8 */
+/* Description: Output 8 bits */
+/*------------------------------------------------------------------------------- */
+ .globl out8
+out8:
+ stb r4,0x0000(r3)
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: out32 */
+/* Description: Output 32 bits */
+/*------------------------------------------------------------------------------- */
+ .globl out32
+out32:
+ stw r4,0x0000(r3)
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: in32 */
+/* Description: Input 32 bits */
+/*------------------------------------------------------------------------------- */
+ .globl in32
+in32:
+ lwz 3,0x0000(3)
+ blr
+
+/**************************************************************************/
+/* PPC405EP specific stuff */
+/**************************************************************************/
+#ifdef CONFIG_405EP
+ppc405ep_init:
+
+#ifdef CONFIG_BUBINGA
+ /*
+ * Initialize EBC chip selects 1 & 4 and GPIO pins (for alternate
+ * function) to support FPGA and NVRAM accesses below.
+ */
+
+ lis r3,GPIO0_OSRH@h /* config GPIO output select */
+ ori r3,r3,GPIO0_OSRH@l
+ lis r4,CONFIG_SYS_GPIO0_OSRH@h
+ ori r4,r4,CONFIG_SYS_GPIO0_OSRH@l
+ stw r4,0(r3)
+ lis r3,GPIO0_OSRL@h
+ ori r3,r3,GPIO0_OSRL@l
+ lis r4,CONFIG_SYS_GPIO0_OSRL@h
+ ori r4,r4,CONFIG_SYS_GPIO0_OSRL@l
+ stw r4,0(r3)
+
+ lis r3,GPIO0_ISR1H@h /* config GPIO input select */
+ ori r3,r3,GPIO0_ISR1H@l
+ lis r4,CONFIG_SYS_GPIO0_ISR1H@h
+ ori r4,r4,CONFIG_SYS_GPIO0_ISR1H@l
+ stw r4,0(r3)
+ lis r3,GPIO0_ISR1L@h
+ ori r3,r3,GPIO0_ISR1L@l
+ lis r4,CONFIG_SYS_GPIO0_ISR1L@h
+ ori r4,r4,CONFIG_SYS_GPIO0_ISR1L@l
+ stw r4,0(r3)
+
+ lis r3,GPIO0_TSRH@h /* config GPIO three-state select */
+ ori r3,r3,GPIO0_TSRH@l
+ lis r4,CONFIG_SYS_GPIO0_TSRH@h
+ ori r4,r4,CONFIG_SYS_GPIO0_TSRH@l
+ stw r4,0(r3)
+ lis r3,GPIO0_TSRL@h
+ ori r3,r3,GPIO0_TSRL@l
+ lis r4,CONFIG_SYS_GPIO0_TSRL@h
+ ori r4,r4,CONFIG_SYS_GPIO0_TSRL@l
+ stw r4,0(r3)
+
+ lis r3,GPIO0_TCR@h /* config GPIO driver output enables */
+ ori r3,r3,GPIO0_TCR@l
+ lis r4,CONFIG_SYS_GPIO0_TCR@h
+ ori r4,r4,CONFIG_SYS_GPIO0_TCR@l
+ stw r4,0(r3)
+
+ li r3,PB1AP /* program EBC bank 1 for RTC access */
+ mtdcr EBC0_CFGADDR,r3
+ lis r3,CONFIG_SYS_EBC_PB1AP@h
+ ori r3,r3,CONFIG_SYS_EBC_PB1AP@l
+ mtdcr EBC0_CFGDATA,r3
+ li r3,PB1CR
+ mtdcr EBC0_CFGADDR,r3
+ lis r3,CONFIG_SYS_EBC_PB1CR@h
+ ori r3,r3,CONFIG_SYS_EBC_PB1CR@l
+ mtdcr EBC0_CFGDATA,r3
+
+ li r3,PB1AP /* program EBC bank 1 for RTC access */
+ mtdcr EBC0_CFGADDR,r3
+ lis r3,CONFIG_SYS_EBC_PB1AP@h
+ ori r3,r3,CONFIG_SYS_EBC_PB1AP@l
+ mtdcr EBC0_CFGDATA,r3
+ li r3,PB1CR
+ mtdcr EBC0_CFGADDR,r3
+ lis r3,CONFIG_SYS_EBC_PB1CR@h
+ ori r3,r3,CONFIG_SYS_EBC_PB1CR@l
+ mtdcr EBC0_CFGDATA,r3
+
+ li r3,PB4AP /* program EBC bank 4 for FPGA access */
+ mtdcr EBC0_CFGADDR,r3
+ lis r3,CONFIG_SYS_EBC_PB4AP@h
+ ori r3,r3,CONFIG_SYS_EBC_PB4AP@l
+ mtdcr EBC0_CFGDATA,r3
+ li r3,PB4CR
+ mtdcr EBC0_CFGADDR,r3
+ lis r3,CONFIG_SYS_EBC_PB4CR@h
+ ori r3,r3,CONFIG_SYS_EBC_PB4CR@l
+ mtdcr EBC0_CFGDATA,r3
+#endif
+
+ /*
+ !-----------------------------------------------------------------------
+ ! Check to see if chip is in bypass mode.
+ ! If so, write stored CPC0_PLLMR0 and CPC0_PLLMR1 values and perform a
+ ! CPU reset Otherwise, skip this step and keep going.
+ ! Note: Running BIOS in bypass mode is not supported since PLB speed
+ ! will not be fast enough for the SDRAM (min 66MHz)
+ !-----------------------------------------------------------------------
+ */
+ mfdcr r5, CPC0_PLLMR1
+ rlwinm r4,r5,1,0x1 /* get system clock source (SSCS) */
+ cmpi cr0,0,r4,0x1
+
+ beq pll_done /* if SSCS =b'1' then PLL has */
+ /* already been set */
+ /* and CPU has been reset */
+ /* so skip to next section */
+
+#ifdef CONFIG_BUBINGA
+ /*
+ !-----------------------------------------------------------------------
+ ! Read NVRAM to get value to write in PLLMR.
+ ! If value has not been correctly saved, write default value
+ ! Default config values (assuming on-board 33MHz SYS_CLK) are above.
+ ! See CPU_DEFAULT_200 and CPU_DEFAULT_266 above.
+ !
+ ! WARNING: This code assumes the first three words in the nvram_t
+ ! structure in openbios.h. Changing the beginning of
+ ! the structure will break this code.
+ !
+ !-----------------------------------------------------------------------
+ */
+ addis r3,0,NVRAM_BASE@h
+ addi r3,r3,NVRAM_BASE@l
+
+ lwz r4, 0(r3)
+ addis r5,0,NVRVFY1@h
+ addi r5,r5,NVRVFY1@l
+ cmp cr0,0,r4,r5 /* Compare 1st NVRAM Magic number*/
+ bne ..no_pllset
+ addi r3,r3,4
+ lwz r4, 0(r3)
+ addis r5,0,NVRVFY2@h
+ addi r5,r5,NVRVFY2@l
+ cmp cr0,0,r4,r5 /* Compare 2 NVRAM Magic number */
+ bne ..no_pllset
+ addi r3,r3,8 /* Skip over conf_size */
+ lwz r4, 4(r3) /* Load PLLMR1 value from NVRAM */
+ lwz r3, 0(r3) /* Load PLLMR0 value from NVRAM */
+ rlwinm r5,r4,1,0x1 /* get system clock source (SSCS) */
+ cmpi cr0,0,r5,1 /* See if PLL is locked */
+ beq pll_write
+..no_pllset:
+#endif /* CONFIG_BUBINGA */
+
+#ifdef CONFIG_TAIHU
+ mfdcr r4, CPC0_BOOT
+ andi. r5, r4, CPC0_BOOT_SEP@l
+ bne strap_1 /* serial eeprom present */
+ addis r5,0,CPLD_REG0_ADDR@h
+ ori r5,r5,CPLD_REG0_ADDR@l
+ andi. r5, r5, 0x10
+ bne _pci_66mhz
+#endif /* CONFIG_TAIHU */
+
+#if defined(CONFIG_ZEUS)
+ mfdcr r4, CPC0_BOOT
+ andi. r5, r4, CPC0_BOOT_SEP@l
+ bne strap_1 /* serial eeprom present */
+ lis r3,0x0000
+ addi r3,r3,0x3030
+ lis r4,0x8042
+ addi r4,r4,0x223e
+ b 1f
+strap_1:
+ mfdcr r3, CPC0_PLLMR0
+ mfdcr r4, CPC0_PLLMR1
+ b 1f
+#endif
+
+ addis r3,0,PLLMR0_DEFAULT@h /* PLLMR0 default value */
+ ori r3,r3,PLLMR0_DEFAULT@l /* */
+ addis r4,0,PLLMR1_DEFAULT@h /* PLLMR1 default value */
+ ori r4,r4,PLLMR1_DEFAULT@l /* */
+
+#ifdef CONFIG_TAIHU
+ b 1f
+_pci_66mhz:
+ addis r3,0,PLLMR0_DEFAULT_PCI66@h
+ ori r3,r3,PLLMR0_DEFAULT_PCI66@l
+ addis r4,0,PLLMR1_DEFAULT_PCI66@h
+ ori r4,r4,PLLMR1_DEFAULT_PCI66@l
+ b 1f
+strap_1:
+ mfdcr r3, CPC0_PLLMR0
+ mfdcr r4, CPC0_PLLMR1
+#endif /* CONFIG_TAIHU */
+
+1:
+ b pll_write /* Write the CPC0_PLLMR with new value */
+
+pll_done:
+ /*
+ !-----------------------------------------------------------------------
+ ! Clear Soft Reset Register
+ ! This is needed to enable PCI if not booting from serial EPROM
+ !-----------------------------------------------------------------------
+ */
+ addi r3, 0, 0x0
+ mtdcr CPC0_SRR, r3
+
+ addis r3,0,0x0010
+ mtctr r3
+pci_wait:
+ bdnz pci_wait
+
+ blr /* return to main code */
+
+/*
+!-----------------------------------------------------------------------------
+! Function: pll_write
+! Description: Updates the value of the CPC0_PLLMR according to CMOS27E documentation
+! That is:
+! 1. Pll is first disabled (de-activated by putting in bypass mode)
+! 2. PLL is reset
+! 3. Clock dividers are set while PLL is held in reset and bypassed
+! 4. PLL Reset is cleared
+! 5. Wait 100us for PLL to lock
+! 6. A core reset is performed
+! Input: r3 = Value to write to CPC0_PLLMR0
+! Input: r4 = Value to write to CPC0_PLLMR1
+! Output r3 = none
+!-----------------------------------------------------------------------------
+*/
+ .globl pll_write
+pll_write:
+ mfdcr r5, CPC0_UCR
+ andis. r5,r5,0xFFFF
+ ori r5,r5,0x0101 /* Stop the UART clocks */
+ mtdcr CPC0_UCR,r5 /* Before changing PLL */
+
+ mfdcr r5, CPC0_PLLMR1
+ rlwinm r5,r5,0,0x7FFFFFFF /* Disable PLL */
+ mtdcr CPC0_PLLMR1,r5
+ oris r5,r5,0x4000 /* Set PLL Reset */
+ mtdcr CPC0_PLLMR1,r5
+
+ mtdcr CPC0_PLLMR0,r3 /* Set clock dividers */
+ rlwinm r5,r4,0,0x3FFFFFFF /* Reset & Bypass new PLL dividers */
+ oris r5,r5,0x4000 /* Set PLL Reset */
+ mtdcr CPC0_PLLMR1,r5 /* Set clock dividers */
+ rlwinm r5,r5,0,0xBFFFFFFF /* Clear PLL Reset */
+ mtdcr CPC0_PLLMR1,r5
+
+ /*
+ ! Wait min of 100us for PLL to lock.
+ ! See CMOS 27E databook for more info.
+ ! At 200MHz, that means waiting 20,000 instructions
+ */
+ addi r3,0,20000 /* 2000 = 0x4e20 */
+ mtctr r3
+pll_wait:
+ bdnz pll_wait
+
+ oris r5,r5,0x8000 /* Enable PLL */
+ mtdcr CPC0_PLLMR1,r5 /* Engage */
+
+ /*
+ * Reset CPU to guarantee timings are OK
+ * Not sure if this is needed...
+ */
+ addis r3,0,0x1000
+ mtspr SPRN_DBCR0,r3 /* This will cause a CPU core reset, and */
+ /* execution will continue from the poweron */
+ /* vector of 0xfffffffc */
+#endif /* CONFIG_405EP */
+
+#if defined(CONFIG_440)
+/*----------------------------------------------------------------------------+
+| mttlb3.
++----------------------------------------------------------------------------*/
+ function_prolog(mttlb3)
+ TLBWE(4,3,2)
+ blr
+ function_epilog(mttlb3)
+
+/*----------------------------------------------------------------------------+
+| mftlb3.
++----------------------------------------------------------------------------*/
+ function_prolog(mftlb3)
+ TLBRE(3,3,2)
+ blr
+ function_epilog(mftlb3)
+
+/*----------------------------------------------------------------------------+
+| mttlb2.
++----------------------------------------------------------------------------*/
+ function_prolog(mttlb2)
+ TLBWE(4,3,1)
+ blr
+ function_epilog(mttlb2)
+
+/*----------------------------------------------------------------------------+
+| mftlb2.
++----------------------------------------------------------------------------*/
+ function_prolog(mftlb2)
+ TLBRE(3,3,1)
+ blr
+ function_epilog(mftlb2)
+
+/*----------------------------------------------------------------------------+
+| mttlb1.
++----------------------------------------------------------------------------*/
+ function_prolog(mttlb1)
+ TLBWE(4,3,0)
+ blr
+ function_epilog(mttlb1)
+
+/*----------------------------------------------------------------------------+
+| mftlb1.
++----------------------------------------------------------------------------*/
+ function_prolog(mftlb1)
+ TLBRE(3,3,0)
+ blr
+ function_epilog(mftlb1)
+#endif /* CONFIG_440 */
+
+#if defined(CONFIG_NAND_SPL)
+/*
+ * void nand_boot_relocate(dst, src, bytes)
+ *
+ * r3 = Destination address to copy code to (in SDRAM)
+ * r4 = Source address to copy code from
+ * r5 = size to copy in bytes
+ */
+nand_boot_relocate:
+ mr r6,r3
+ mr r7,r4
+ mflr r8
+
+ /*
+ * Copy SPL from icache into SDRAM
+ */
+ subi r3,r3,4
+ subi r4,r4,4
+ srwi r5,r5,2
+ mtctr r5
+..spl_loop:
+ lwzu r0,4(r4)
+ stwu r0,4(r3)
+ bdnz ..spl_loop
+
+ /*
+ * Calculate "corrected" link register, so that we "continue"
+ * in execution in destination range
+ */
+ sub r3,r7,r6 /* r3 = src - dst */
+ sub r8,r8,r3 /* r8 = link-reg - (src - dst) */
+ mtlr r8
+ blr
+
+nand_boot_common:
+ /*
+ * First initialize SDRAM. It has to be available *before* calling
+ * nand_boot().
+ */
+ lis r3,CONFIG_SYS_SDRAM_BASE@h
+ ori r3,r3,CONFIG_SYS_SDRAM_BASE@l
+ bl initdram
+
+ /*
+ * Now copy the 4k SPL code into SDRAM and continue execution
+ * from there.
+ */
+ lis r3,CONFIG_SYS_NAND_BOOT_SPL_DST@h
+ ori r3,r3,CONFIG_SYS_NAND_BOOT_SPL_DST@l
+ lis r4,CONFIG_SYS_NAND_BOOT_SPL_SRC@h
+ ori r4,r4,CONFIG_SYS_NAND_BOOT_SPL_SRC@l
+ lis r5,CONFIG_SYS_NAND_BOOT_SPL_SIZE@h
+ ori r5,r5,CONFIG_SYS_NAND_BOOT_SPL_SIZE@l
+ bl nand_boot_relocate
+
+ /*
+ * We're running from SDRAM now!!!
+ *
+ * It is necessary for 4xx systems to relocate from running at
+ * the original location (0xfffffxxx) to somewhere else (SDRAM
+ * preferably). This is because CS0 needs to be reconfigured for
+ * NAND access. And we can't reconfigure this CS when currently
+ * "running" from it.
+ */
+
+ /*
+ * Finally call nand_boot() to load main NAND U-Boot image from
+ * NAND and jump to it.
+ */
+ bl nand_boot /* will not return */
+#endif /* CONFIG_NAND_SPL */
diff --git a/arch/ppc/cpu/ppc4xx/tlb.c b/arch/ppc/cpu/ppc4xx/tlb.c
new file mode 100644
index 0000000..24a9a9c
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/tlb.c
@@ -0,0 +1,352 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_440)
+
+#include <ppc440.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+#include <asm/mmu.h>
+
+typedef struct region {
+ u64 base;
+ u32 size;
+ u32 tlb_word2_i_value;
+} region_t;
+
+void remove_tlb(u32 vaddr, u32 size)
+{
+ int i;
+ u32 tlb_word0_value;
+ u32 tlb_vaddr;
+ u32 tlb_size = 0;
+
+ for (i=0; i<PPC4XX_TLB_SIZE; i++) {
+ tlb_word0_value = mftlb1(i);
+ tlb_vaddr = TLB_WORD0_EPN_DECODE(tlb_word0_value);
+ if (((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_ENABLE) &&
+ (tlb_vaddr >= vaddr)) {
+ /*
+ * TLB is enabled and start address is lower or equal
+ * than the area we are looking for. Now we only have
+ * to check the size/end address for a match.
+ */
+ switch (tlb_word0_value & TLB_WORD0_SIZE_MASK) {
+ case TLB_WORD0_SIZE_1KB:
+ tlb_size = 1 << 10;
+ break;
+ case TLB_WORD0_SIZE_4KB:
+ tlb_size = 4 << 10;
+ break;
+ case TLB_WORD0_SIZE_16KB:
+ tlb_size = 16 << 10;
+ break;
+ case TLB_WORD0_SIZE_64KB:
+ tlb_size = 64 << 10;
+ break;
+ case TLB_WORD0_SIZE_256KB:
+ tlb_size = 256 << 10;
+ break;
+ case TLB_WORD0_SIZE_1MB:
+ tlb_size = 1 << 20;
+ break;
+ case TLB_WORD0_SIZE_16MB:
+ tlb_size = 16 << 20;
+ break;
+ case TLB_WORD0_SIZE_256MB:
+ tlb_size = 256 << 20;
+ break;
+ }
+
+ /*
+ * Now check the end-address if it's in the range
+ */
+ if ((tlb_vaddr + tlb_size - 1) <= (vaddr + size - 1))
+ /*
+ * Found a TLB in the range.
+ * Disable it by writing 0 to tlb0 word.
+ */
+ mttlb1(i, 0);
+ }
+ }
+
+ /* Execute an ISYNC instruction so that the new TLB entry takes effect */
+ asm("isync");
+}
+
+/*
+ * Change the I attribute (cache inhibited) of a TLB or multiple TLB's.
+ * This function is used to either turn cache on or off in a specific
+ * memory area.
+ */
+void change_tlb(u32 vaddr, u32 size, u32 tlb_word2_i_value)
+{
+ int i;
+ u32 tlb_word0_value;
+ u32 tlb_word2_value;
+ u32 tlb_vaddr;
+ u32 tlb_size = 0;
+
+ for (i=0; i<PPC4XX_TLB_SIZE; i++) {
+ tlb_word0_value = mftlb1(i);
+ tlb_vaddr = TLB_WORD0_EPN_DECODE(tlb_word0_value);
+ if (((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_ENABLE) &&
+ (tlb_vaddr >= vaddr)) {
+ /*
+ * TLB is enabled and start address is lower or equal
+ * than the area we are looking for. Now we only have
+ * to check the size/end address for a match.
+ */
+ switch (tlb_word0_value & TLB_WORD0_SIZE_MASK) {
+ case TLB_WORD0_SIZE_1KB:
+ tlb_size = 1 << 10;
+ break;
+ case TLB_WORD0_SIZE_4KB:
+ tlb_size = 4 << 10;
+ break;
+ case TLB_WORD0_SIZE_16KB:
+ tlb_size = 16 << 10;
+ break;
+ case TLB_WORD0_SIZE_64KB:
+ tlb_size = 64 << 10;
+ break;
+ case TLB_WORD0_SIZE_256KB:
+ tlb_size = 256 << 10;
+ break;
+ case TLB_WORD0_SIZE_1MB:
+ tlb_size = 1 << 20;
+ break;
+ case TLB_WORD0_SIZE_16MB:
+ tlb_size = 16 << 20;
+ break;
+ case TLB_WORD0_SIZE_256MB:
+ tlb_size = 256 << 20;
+ break;
+ }
+
+ /*
+ * Now check the end-address if it's in the range
+ */
+ if (((tlb_vaddr + tlb_size - 1) <= (vaddr + size - 1)) ||
+ ((tlb_vaddr < (vaddr + size - 1)) &&
+ ((tlb_vaddr + tlb_size - 1) > (vaddr + size - 1)))) {
+ /*
+ * Found a TLB in the range.
+ * Change cache attribute in tlb2 word.
+ */
+ tlb_word2_value =
+ TLB_WORD2_U0_DISABLE | TLB_WORD2_U1_DISABLE |
+ TLB_WORD2_U2_DISABLE | TLB_WORD2_U3_DISABLE |
+ TLB_WORD2_W_DISABLE | tlb_word2_i_value |
+ TLB_WORD2_M_DISABLE | TLB_WORD2_G_DISABLE |
+ TLB_WORD2_E_DISABLE | TLB_WORD2_UX_ENABLE |
+ TLB_WORD2_UW_ENABLE | TLB_WORD2_UR_ENABLE |
+ TLB_WORD2_SX_ENABLE | TLB_WORD2_SW_ENABLE |
+ TLB_WORD2_SR_ENABLE;
+
+ /*
+ * Now either flush or invalidate the dcache
+ */
+ if (tlb_word2_i_value)
+ flush_dcache();
+ else
+ invalidate_dcache();
+
+ mttlb3(i, tlb_word2_value);
+ asm("iccci 0,0");
+ }
+ }
+ }
+
+ /* Execute an ISYNC instruction so that the new TLB entry takes effect */
+ asm("isync");
+}
+
+static int add_tlb_entry(u64 phys_addr,
+ u32 virt_addr,
+ u32 tlb_word0_size_value,
+ u32 tlb_word2_i_value)
+{
+ int i;
+ unsigned long tlb_word0_value;
+ unsigned long tlb_word1_value;
+ unsigned long tlb_word2_value;
+
+ /* First, find the index of a TLB entry not being used */
+ for (i=0; i<PPC4XX_TLB_SIZE; i++) {
+ tlb_word0_value = mftlb1(i);
+ if ((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_DISABLE)
+ break;
+ }
+ if (i >= PPC4XX_TLB_SIZE)
+ return -1;
+
+ /* Second, create the TLB entry */
+ tlb_word0_value = TLB_WORD0_EPN_ENCODE(virt_addr) | TLB_WORD0_V_ENABLE |
+ TLB_WORD0_TS_0 | tlb_word0_size_value;
+ tlb_word1_value = TLB_WORD1_RPN_ENCODE((u32)phys_addr) |
+ TLB_WORD1_ERPN_ENCODE(phys_addr >> 32);
+ tlb_word2_value = TLB_WORD2_U0_DISABLE | TLB_WORD2_U1_DISABLE |
+ TLB_WORD2_U2_DISABLE | TLB_WORD2_U3_DISABLE |
+ TLB_WORD2_W_DISABLE | tlb_word2_i_value |
+ TLB_WORD2_M_DISABLE | TLB_WORD2_G_DISABLE |
+ TLB_WORD2_E_DISABLE | TLB_WORD2_UX_ENABLE |
+ TLB_WORD2_UW_ENABLE | TLB_WORD2_UR_ENABLE |
+ TLB_WORD2_SX_ENABLE | TLB_WORD2_SW_ENABLE |
+ TLB_WORD2_SR_ENABLE;
+
+ /* Wait for all memory accesses to complete */
+ sync();
+
+ /* Third, add the TLB entries */
+ mttlb1(i, tlb_word0_value);
+ mttlb2(i, tlb_word1_value);
+ mttlb3(i, tlb_word2_value);
+
+ /* Execute an ISYNC instruction so that the new TLB entry takes effect */
+ asm("isync");
+
+ return 0;
+}
+
+static void program_tlb_addr(u64 phys_addr,
+ u32 virt_addr,
+ u32 mem_size,
+ u32 tlb_word2_i_value)
+{
+ int rc;
+ int tlb_i;
+
+ tlb_i = tlb_word2_i_value;
+ while (mem_size != 0) {
+ rc = 0;
+ /* Add the TLB entries in to map the region. */
+ if (((phys_addr & TLB_256MB_ALIGN_MASK) == phys_addr) &&
+ (mem_size >= TLB_256MB_SIZE)) {
+ /* Add a 256MB TLB entry */
+ if ((rc = add_tlb_entry(phys_addr, virt_addr,
+ TLB_WORD0_SIZE_256MB, tlb_i)) == 0) {
+ mem_size -= TLB_256MB_SIZE;
+ phys_addr += TLB_256MB_SIZE;
+ virt_addr += TLB_256MB_SIZE;
+ }
+ } else if (((phys_addr & TLB_16MB_ALIGN_MASK) == phys_addr) &&
+ (mem_size >= TLB_16MB_SIZE)) {
+ /* Add a 16MB TLB entry */
+ if ((rc = add_tlb_entry(phys_addr, virt_addr,
+ TLB_WORD0_SIZE_16MB, tlb_i)) == 0) {
+ mem_size -= TLB_16MB_SIZE;
+ phys_addr += TLB_16MB_SIZE;
+ virt_addr += TLB_16MB_SIZE;
+ }
+ } else if (((phys_addr & TLB_1MB_ALIGN_MASK) == phys_addr) &&
+ (mem_size >= TLB_1MB_SIZE)) {
+ /* Add a 1MB TLB entry */
+ if ((rc = add_tlb_entry(phys_addr, virt_addr,
+ TLB_WORD0_SIZE_1MB, tlb_i)) == 0) {
+ mem_size -= TLB_1MB_SIZE;
+ phys_addr += TLB_1MB_SIZE;
+ virt_addr += TLB_1MB_SIZE;
+ }
+ } else if (((phys_addr & TLB_256KB_ALIGN_MASK) == phys_addr) &&
+ (mem_size >= TLB_256KB_SIZE)) {
+ /* Add a 256KB TLB entry */
+ if ((rc = add_tlb_entry(phys_addr, virt_addr,
+ TLB_WORD0_SIZE_256KB, tlb_i)) == 0) {
+ mem_size -= TLB_256KB_SIZE;
+ phys_addr += TLB_256KB_SIZE;
+ virt_addr += TLB_256KB_SIZE;
+ }
+ } else if (((phys_addr & TLB_64KB_ALIGN_MASK) == phys_addr) &&
+ (mem_size >= TLB_64KB_SIZE)) {
+ /* Add a 64KB TLB entry */
+ if ((rc = add_tlb_entry(phys_addr, virt_addr,
+ TLB_WORD0_SIZE_64KB, tlb_i)) == 0) {
+ mem_size -= TLB_64KB_SIZE;
+ phys_addr += TLB_64KB_SIZE;
+ virt_addr += TLB_64KB_SIZE;
+ }
+ } else if (((phys_addr & TLB_16KB_ALIGN_MASK) == phys_addr) &&
+ (mem_size >= TLB_16KB_SIZE)) {
+ /* Add a 16KB TLB entry */
+ if ((rc = add_tlb_entry(phys_addr, virt_addr,
+ TLB_WORD0_SIZE_16KB, tlb_i)) == 0) {
+ mem_size -= TLB_16KB_SIZE;
+ phys_addr += TLB_16KB_SIZE;
+ virt_addr += TLB_16KB_SIZE;
+ }
+ } else if (((phys_addr & TLB_4KB_ALIGN_MASK) == phys_addr) &&
+ (mem_size >= TLB_4KB_SIZE)) {
+ /* Add a 4KB TLB entry */
+ if ((rc = add_tlb_entry(phys_addr, virt_addr,
+ TLB_WORD0_SIZE_4KB, tlb_i)) == 0) {
+ mem_size -= TLB_4KB_SIZE;
+ phys_addr += TLB_4KB_SIZE;
+ virt_addr += TLB_4KB_SIZE;
+ }
+ } else if (((phys_addr & TLB_1KB_ALIGN_MASK) == phys_addr) &&
+ (mem_size >= TLB_1KB_SIZE)) {
+ /* Add a 1KB TLB entry */
+ if ((rc = add_tlb_entry(phys_addr, virt_addr,
+ TLB_WORD0_SIZE_1KB, tlb_i)) == 0) {
+ mem_size -= TLB_1KB_SIZE;
+ phys_addr += TLB_1KB_SIZE;
+ virt_addr += TLB_1KB_SIZE;
+ }
+ } else {
+ printf("ERROR: no TLB size exists for the base address 0x%llx.\n",
+ phys_addr);
+ }
+
+ if (rc != 0)
+ printf("ERROR: no TLB entries available for the base addr 0x%llx.\n",
+ phys_addr);
+ }
+
+ return;
+}
+
+/*
+ * Program one (or multiple) TLB entries for one memory region
+ *
+ * Common usage for boards with SDRAM DIMM modules to dynamically
+ * configure the TLB's for the SDRAM
+ */
+void program_tlb(u64 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value)
+{
+ region_t region_array;
+
+ region_array.base = phys_addr;
+ region_array.size = size;
+ region_array.tlb_word2_i_value = tlb_word2_i_value; /* en-/disable cache */
+
+ /* Call the routine to add in the tlb entries for the memory regions */
+ program_tlb_addr(region_array.base, virt_addr, region_array.size,
+ region_array.tlb_word2_i_value);
+
+ return;
+}
+
+#endif /* CONFIG_440 */
diff --git a/arch/ppc/cpu/ppc4xx/traps.c b/arch/ppc/cpu/ppc4xx/traps.c
new file mode 100644
index 0000000..42e4221
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/traps.c
@@ -0,0 +1,409 @@
+/*
+ * linux/arch/ppc/kernel/traps.c
+ *
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modified by Cort Dougan (cort@cs.nmt.edu)
+ * and Paul Mackerras (paulus@cs.anu.edu.au)
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file handles the architecture-dependent parts of hardware exceptions
+ */
+
+#include <common.h>
+#include <command.h>
+#include <kgdb.h>
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Returns 0 if exception not found and fixup otherwise. */
+extern unsigned long search_exception_table(unsigned long);
+
+/* THIS NEEDS CHANGING to use the board info structure.
+ */
+#define END_OF_MEM (gd->bd->bi_memstart + gd->bd->bi_memsize)
+
+static __inline__ void set_tsr(unsigned long val)
+{
+#if defined(CONFIG_440)
+ asm volatile("mtspr 0x150, %0" : : "r" (val));
+#else
+ asm volatile("mttsr %0" : : "r" (val));
+#endif
+}
+
+static __inline__ unsigned long get_esr(void)
+{
+ unsigned long val;
+
+#if defined(CONFIG_440)
+ asm volatile("mfspr %0, 0x03e" : "=r" (val) :);
+#else
+ asm volatile("mfesr %0" : "=r" (val) :);
+#endif
+ return val;
+}
+
+#define ESR_MCI 0x80000000
+#define ESR_PIL 0x08000000
+#define ESR_PPR 0x04000000
+#define ESR_PTR 0x02000000
+#define ESR_DST 0x00800000
+#define ESR_DIZ 0x00400000
+#define ESR_U0F 0x00008000
+
+#if defined(CONFIG_CMD_BEDBUG)
+extern void do_bedbug_breakpoint(struct pt_regs *);
+#endif
+
+/*
+ * Trap & Exception support
+ */
+
+void
+print_backtrace(unsigned long *sp)
+{
+ int cnt = 0;
+ unsigned long i;
+
+ printf("Call backtrace: ");
+ while (sp) {
+ if ((uint)sp > END_OF_MEM)
+ break;
+
+ i = sp[1];
+ if (cnt++ % 7 == 0)
+ printf("\n");
+ printf("%08lX ", i);
+ if (cnt > 32) break;
+ sp = (unsigned long *)*sp;
+ }
+ printf("\n");
+}
+
+void show_regs(struct pt_regs * regs)
+{
+ int i;
+
+ printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DEAR: %08lX\n",
+ regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
+ printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
+ regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
+ regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
+ regs->msr&MSR_IR ? 1 : 0,
+ regs->msr&MSR_DR ? 1 : 0);
+
+ printf("\n");
+ for (i = 0; i < 32; i++) {
+ if ((i % 8) == 0) {
+ printf("GPR%02d: ", i);
+ }
+
+ printf("%08lX ", regs->gpr[i]);
+ if ((i % 8) == 7) {
+ printf("\n");
+ }
+ }
+}
+
+
+void
+_exception(int signr, struct pt_regs *regs)
+{
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Exception");
+}
+
+void
+MachineCheckException(struct pt_regs *regs)
+{
+ unsigned long fixup, val;
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+ u32 value2;
+ int corr_ecc = 0;
+ int uncorr_ecc = 0;
+#endif
+
+ if ((fixup = search_exception_table(regs->nip)) != 0) {
+ regs->nip = fixup;
+ val = mfspr(MCSR);
+ /* Clear MCSR */
+ mtspr(SPRN_MCSR, val);
+ return;
+ }
+
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+
+ printf("Machine Check Exception.\n");
+ printf("Caused by (from msr): ");
+ printf("regs %p ", regs);
+
+ val = get_esr();
+
+#if !defined(CONFIG_440) && !defined(CONFIG_405EX)
+ if (val& ESR_IMCP) {
+ printf("Instruction");
+ mtspr(ESR, val & ~ESR_IMCP);
+ } else {
+ printf("Data");
+ }
+ printf(" machine check.\n");
+
+#elif defined(CONFIG_440) || defined(CONFIG_405EX)
+ if (val& ESR_IMCP){
+ printf("Instruction Synchronous Machine Check exception\n");
+ mtspr(SPRN_ESR, val & ~ESR_IMCP);
+ } else {
+ val = mfspr(MCSR);
+ if (val & MCSR_IB)
+ printf("Instruction Read PLB Error\n");
+#if defined(CONFIG_440)
+ if (val & MCSR_DRB)
+ printf("Data Read PLB Error\n");
+ if (val & MCSR_DWB)
+ printf("Data Write PLB Error\n");
+#else
+ if (val & MCSR_DB)
+ printf("Data PLB Error\n");
+#endif
+ if (val & MCSR_TLBP)
+ printf("TLB Parity Error\n");
+ if (val & MCSR_ICP){
+ /*flush_instruction_cache(); */
+ printf("I-Cache Parity Error\n");
+ }
+ if (val & MCSR_DCSP)
+ printf("D-Cache Search Parity Error\n");
+ if (val & MCSR_DCFP)
+ printf("D-Cache Flush Parity Error\n");
+ if (val & MCSR_IMPE)
+ printf("Machine Check exception is imprecise\n");
+
+ /* Clear MCSR */
+ mtspr(SPRN_MCSR, val);
+ }
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+ mfsdram(DDR0_00, val) ;
+ printf("DDR0: DDR0_00 %lx\n", val);
+ val = (val >> 16) & 0xff;
+ if (val & 0x80)
+ printf("DDR0: At least one interrupt active\n");
+ if (val & 0x40)
+ printf("DDR0: DRAM initialization complete.\n");
+ if (val & 0x20) {
+ printf("DDR0: Multiple uncorrectable ECC events.\n");
+ uncorr_ecc = 1;
+ }
+ if (val & 0x10) {
+ printf("DDR0: Single uncorrectable ECC event.\n");
+ uncorr_ecc = 1;
+ }
+ if (val & 0x08) {
+ printf("DDR0: Multiple correctable ECC events.\n");
+ corr_ecc = 1;
+ }
+ if (val & 0x04) {
+ printf("DDR0: Single correctable ECC event.\n");
+ corr_ecc = 1;
+ }
+ if (val & 0x02)
+ printf("Multiple accesses outside the defined"
+ " physical memory space detected\n");
+ if (val & 0x01)
+ printf("DDR0: Single access outside the defined"
+ " physical memory space detected.\n");
+
+ mfsdram(DDR0_01, val);
+ val = (val >> 8) & 0x7;
+ switch (val ) {
+ case 0:
+ printf("DDR0: Write Out-of-Range command\n");
+ break;
+ case 1:
+ printf("DDR0: Read Out-of-Range command\n");
+ break;
+ case 2:
+ printf("DDR0: Masked write Out-of-Range command\n");
+ break;
+ case 4:
+ printf("DDR0: Wrap write Out-of-Range command\n");
+ break;
+ case 5:
+ printf("DDR0: Wrap read Out-of-Range command\n");
+ break;
+ default:
+ mfsdram(DDR0_01, value2);
+ printf("DDR0: No DDR0 error know 0x%lx %x\n", val, value2);
+ }
+ mfsdram(DDR0_23, val);
+ if (((val >> 16) & 0xff) && corr_ecc)
+ printf("DDR0: Syndrome for correctable ECC event 0x%lx\n",
+ (val >> 16) & 0xff);
+ mfsdram(DDR0_23, val);
+ if (((val >> 8) & 0xff) && uncorr_ecc)
+ printf("DDR0: Syndrome for uncorrectable ECC event 0x%lx\n",
+ (val >> 8) & 0xff);
+ mfsdram(DDR0_33, val);
+ if (val)
+ printf("DDR0: Address of command that caused an "
+ "Out-of-Range interrupt %lx\n", val);
+ mfsdram(DDR0_34, val);
+ if (val && uncorr_ecc)
+ printf("DDR0: Address of uncorrectable ECC event %lx\n", val);
+ mfsdram(DDR0_35, val);
+ if (val && uncorr_ecc)
+ printf("DDR0: Address of uncorrectable ECC event %lx\n", val);
+ mfsdram(DDR0_36, val);
+ if (val && uncorr_ecc)
+ printf("DDR0: Data of uncorrectable ECC event 0x%08lx\n", val);
+ mfsdram(DDR0_37, val);
+ if (val && uncorr_ecc)
+ printf("DDR0: Data of uncorrectable ECC event 0x%08lx\n", val);
+ mfsdram(DDR0_38, val);
+ if (val && corr_ecc)
+ printf("DDR0: Address of correctable ECC event %lx\n", val);
+ mfsdram(DDR0_39, val);
+ if (val && corr_ecc)
+ printf("DDR0: Address of correctable ECC event %lx\n", val);
+ mfsdram(DDR0_40, val);
+ if (val && corr_ecc)
+ printf("DDR0: Data of correctable ECC event 0x%08lx\n", val);
+ mfsdram(DDR0_41, val);
+ if (val && corr_ecc)
+ printf("DDR0: Data of correctable ECC event 0x%08lx\n", val);
+#endif /* CONFIG_440EPX */
+#endif /* CONFIG_440 */
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("machine check");
+}
+
+void
+AlignmentException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+
+ show_regs(regs);
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Alignment Exception");
+}
+
+void
+ProgramCheckException(struct pt_regs *regs)
+{
+ long esr_val;
+
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+
+ show_regs(regs);
+
+ esr_val = get_esr();
+ if( esr_val & ESR_PIL )
+ printf( "** Illegal Instruction **\n" );
+ else if( esr_val & ESR_PPR )
+ printf( "** Privileged Instruction **\n" );
+ else if( esr_val & ESR_PTR )
+ printf( "** Trap Instruction **\n" );
+
+ print_backtrace((unsigned long *)regs->gpr[1]);
+ panic("Program Check Exception");
+}
+
+void
+DecrementerPITException(struct pt_regs *regs)
+{
+ /*
+ * Reset PIT interrupt
+ */
+ set_tsr(0x08000000);
+
+ /*
+ * Call timer_interrupt routine in interrupts.c
+ */
+ timer_interrupt(NULL);
+}
+
+
+void
+UnknownException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+ if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+ return;
+#endif
+
+ printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
+ regs->nip, regs->msr, regs->trap);
+ _exception(0, regs);
+}
+
+void
+DebugException(struct pt_regs *regs)
+{
+ printf("Debugger trap at @ %lx\n", regs->nip );
+ show_regs(regs);
+#if defined(CONFIG_CMD_BEDBUG)
+ do_bedbug_breakpoint( regs );
+#endif
+}
+
+/* Probe an address by reading. If not present, return -1, otherwise
+ * return 0.
+ */
+int
+addr_probe(uint *addr)
+{
+#if 0
+ int retval;
+
+ __asm__ __volatile__( \
+ "1: lwz %0,0(%1)\n" \
+ " eieio\n" \
+ " li %0,0\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3: li %0,-1\n" \
+ " b 2b\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .align 2\n" \
+ " .long 1b,3b\n" \
+ ".text" \
+ : "=r" (retval) : "r"(addr));
+
+ return (retval);
+#endif
+ return 0;
+}
diff --git a/arch/ppc/cpu/ppc4xx/u-boot.lds b/arch/ppc/cpu/ppc4xx/u-boot.lds
new file mode 100644
index 0000000..3704d8a
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/u-boot.lds
@@ -0,0 +1,169 @@
+/*
+ * Copyright 2007-2009 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include "config.h" /* CONFIG_BOARDDIR */
+
+#ifndef RESET_VECTOR_ADDRESS
+#define RESET_VECTOR_ADDRESS 0xfffffffc
+#endif
+
+OUTPUT_ARCH(powerpc)
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+PHDRS
+{
+ text PT_LOAD;
+ bss PT_LOAD;
+}
+
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ *(.text)
+ *(.got1)
+ } :text
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.eh_frame)
+ *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+ } :text
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+#ifdef CONFIG_440
+ .bootpg RESET_VECTOR_ADDRESS - 0xffc :
+ {
+ arch/ppc/cpu/ppc4xx/start.o (.bootpg)
+
+ /*
+ * PPC440 board need a board specific object with the
+ * TLB definitions. This needs to get included right after
+ * start.o, since the first shadow TLB only covers 4k
+ * of address space.
+ */
+ CONFIG_BOARDDIR/init.o (.bootpg)
+ } :text = 0xffff
+#endif
+
+ .resetvec RESET_VECTOR_ADDRESS :
+ {
+ *(.resetvec)
+ } :text = 0xffff
+
+ . = RESET_VECTOR_ADDRESS + 0x4;
+
+ /*
+ * Make sure that the bss segment isn't linked at 0x0, otherwise its
+ * address won't be updated during relocation fixups. Note that
+ * this is a temporary fix. Code to dynamically the fixup the bss
+ * location will be added in the future. When the bss relocation
+ * fixup code is present this workaround should be removed.
+ */
+#if (RESET_VECTOR_ADDRESS == 0xfffffffc)
+ . |= 0x10;
+#endif
+
+ __bss_start = .;
+ .bss (NOLOAD) :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ } :bss
+
+ . = ALIGN(4);
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/arch/ppc/cpu/ppc4xx/uic.c b/arch/ppc/cpu/ppc4xx/uic.c
new file mode 100644
index 0000000..8b1b259
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/uic.c
@@ -0,0 +1,180 @@
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002 (440 port)
+ * Scott McNutt, Artesyn Communication Producs, smcnutt@artsyncp.com
+ *
+ * (C) Copyright 2003 (440GX port)
+ * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
+ *
+ * (C) Copyright 2008 (PPC440X05 port for Virtex 5 FX)
+ * Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * Work supported by Qtechnology (htpp://qtec.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/interrupt.h>
+#include <ppc4xx.h>
+#include <ppc_asm.tmpl>
+#include <commproc.h>
+
+#if (UIC_MAX > 3)
+#define UICB0_ALL (UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI) | \
+ UIC_MASK(VECNUM_UIC2CI) | UIC_MASK(VECNUM_UIC2NCI) | \
+ UIC_MASK(VECNUM_UIC3CI) | UIC_MASK(VECNUM_UIC3NCI))
+#elif (UIC_MAX > 2)
+#define UICB0_ALL (UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI) | \
+ UIC_MASK(VECNUM_UIC2CI) | UIC_MASK(VECNUM_UIC2NCI))
+#elif (UIC_MAX > 1)
+#define UICB0_ALL (UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI))
+#else
+#define UICB0_ALL 0
+#endif
+
+u32 get_dcr(u16);
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void pic_enable(void)
+{
+#if (UIC_MAX > 1)
+ /* Install the UIC1 handlers */
+ irq_install_handler(VECNUM_UIC1NCI, (void *)(void *)external_interrupt, 0);
+ irq_install_handler(VECNUM_UIC1CI, (void *)(void *)external_interrupt, 0);
+#endif
+#if (UIC_MAX > 2)
+ irq_install_handler(VECNUM_UIC2NCI, (void *)(void *)external_interrupt, 0);
+ irq_install_handler(VECNUM_UIC2CI, (void *)(void *)external_interrupt, 0);
+#endif
+#if (UIC_MAX > 3)
+ irq_install_handler(VECNUM_UIC3NCI, (void *)(void *)external_interrupt, 0);
+ irq_install_handler(VECNUM_UIC3CI, (void *)(void *)external_interrupt, 0);
+#endif
+}
+
+/* Handler for UIC interrupt */
+static void uic_interrupt(u32 uic_base, int vec_base)
+{
+ u32 uic_msr;
+ u32 msr_shift;
+ int vec;
+
+ /*
+ * Read masked interrupt status register to determine interrupt source
+ */
+ uic_msr = get_dcr(uic_base + UIC_MSR);
+ msr_shift = uic_msr;
+ vec = vec_base;
+
+ while (msr_shift != 0) {
+ if (msr_shift & 0x80000000)
+ interrupt_run_handler(vec);
+ /*
+ * Shift msr to next position and increment vector
+ */
+ msr_shift <<= 1;
+ vec++;
+ }
+}
+
+/*
+ * Handle external interrupts
+ */
+void external_interrupt(struct pt_regs *regs)
+{
+ u32 uic_msr;
+
+ /*
+ * Read masked interrupt status register to determine interrupt source
+ */
+ uic_msr = mfdcr(UIC0MSR);
+
+#if (UIC_MAX > 1)
+ if ((UIC_MASK(VECNUM_UIC1CI) & uic_msr) ||
+ (UIC_MASK(VECNUM_UIC1NCI) & uic_msr))
+ uic_interrupt(UIC1_DCR_BASE, 32);
+#endif
+
+#if (UIC_MAX > 2)
+ if ((UIC_MASK(VECNUM_UIC2CI) & uic_msr) ||
+ (UIC_MASK(VECNUM_UIC2NCI) & uic_msr))
+ uic_interrupt(UIC2_DCR_BASE, 64);
+#endif
+
+#if (UIC_MAX > 3)
+ if ((UIC_MASK(VECNUM_UIC3CI) & uic_msr) ||
+ (UIC_MASK(VECNUM_UIC3NCI) & uic_msr))
+ uic_interrupt(UIC3_DCR_BASE, 96);
+#endif
+
+ mtdcr(UIC0SR, (uic_msr & UICB0_ALL));
+
+ if (uic_msr & ~(UICB0_ALL))
+ uic_interrupt(UIC0_DCR_BASE, 0);
+
+ return;
+}
+
+void pic_irq_ack(unsigned int vec)
+{
+ if ((vec >= 0) && (vec < 32))
+ mtdcr(UIC0SR, UIC_MASK(vec));
+ else if ((vec >= 32) && (vec < 64))
+ mtdcr(UIC1SR, UIC_MASK(vec));
+ else if ((vec >= 64) && (vec < 96))
+ mtdcr(UIC2SR, UIC_MASK(vec));
+ else if (vec >= 96)
+ mtdcr(UIC3SR, UIC_MASK(vec));
+}
+
+/*
+ * Install and free a interrupt handler.
+ */
+void pic_irq_enable(unsigned int vec)
+{
+
+ if ((vec >= 0) && (vec < 32))
+ mtdcr(UIC0ER, mfdcr(UIC0ER) | UIC_MASK(vec));
+ else if ((vec >= 32) && (vec < 64))
+ mtdcr(UIC1ER, mfdcr(UIC1ER) | UIC_MASK(vec));
+ else if ((vec >= 64) && (vec < 96))
+ mtdcr(UIC2ER, mfdcr(UIC2ER) | UIC_MASK(vec));
+ else if (vec >= 96)
+ mtdcr(UIC3ER, mfdcr(UIC3ER) | UIC_MASK(vec));
+
+ debug("Install interrupt vector %d\n", vec);
+}
+
+void pic_irq_disable(unsigned int vec)
+{
+ if ((vec >= 0) && (vec < 32))
+ mtdcr(UIC0ER, mfdcr(UIC0ER) & ~UIC_MASK(vec));
+ else if ((vec >= 32) && (vec < 64))
+ mtdcr(UIC1ER, mfdcr(UIC1ER) & ~UIC_MASK(vec));
+ else if ((vec >= 64) && (vec < 96))
+ mtdcr(UIC2ER, mfdcr(UIC2ER) & ~UIC_MASK(vec));
+ else if (vec >= 96)
+ mtdcr(UIC3ER, mfdcr(UIC3ER) & ~UIC_MASK(vec));
+}
diff --git a/arch/ppc/cpu/ppc4xx/usb.c b/arch/ppc/cpu/ppc4xx/usb.c
new file mode 100644
index 0000000..592efe7
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/usb.c
@@ -0,0 +1,66 @@
+/*
+ * (C) Copyright 2007
+ * Markus Klotzbuecher, DENX Software Engineering <mk@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
+
+#ifdef CONFIG_4xx_DCACHE
+#include <asm/mmu.h>
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
+#include "usbdev.h"
+
+int usb_cpu_init(void)
+{
+#ifdef CONFIG_4xx_DCACHE
+ /* disable cache */
+ change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, TLB_WORD2_I_ENABLE);
+#endif
+
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPX)
+ usb_dev_init();
+#endif
+ return 0;
+}
+
+int usb_cpu_stop(void)
+{
+#ifdef CONFIG_4xx_DCACHE
+ /* enable cache */
+ change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, 0);
+#endif
+ return 0;
+}
+
+int usb_cpu_init_fail(void)
+{
+#ifdef CONFIG_4xx_DCACHE
+ /* enable cache */
+ change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, 0);
+#endif
+ return 0;
+}
+
+#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */
diff --git a/arch/ppc/cpu/ppc4xx/usb_ohci.c b/arch/ppc/cpu/ppc4xx/usb_ohci.c
new file mode 100644
index 0000000..a9edacd
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/usb_ohci.c
@@ -0,0 +1,1648 @@
+/*
+ * URB OHCI HCD (Host Controller Driver) for USB on the PPC440EP.
+ *
+ * (C) Copyright 2003-2004
+ * Gary Jennejohn, DENX Software Engineering <garyj@denx.de>
+ *
+ * (C) Copyright 2004
+ * Pierre Aubert, Staubli Faverges <p.aubert@staubli.com>
+ *
+ * Note: Much of this code has been derived from Linux 2.4
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+/*
+ * IMPORTANT NOTES
+ * 1 - this driver is intended for use with USB Mass Storage Devices
+ * (BBB) ONLY. There is NO support for Interrupt or Isochronous pipes!
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_USB_OHCI
+
+#include <malloc.h>
+#include <usb.h>
+#include "usb_ohci.h"
+
+#include "usbdev.h"
+
+#define OHCI_USE_NPS /* force NoPowerSwitching mode */
+#undef OHCI_VERBOSE_DEBUG /* not always helpful */
+#undef DEBUG
+#undef SHOW_INFO
+#undef OHCI_FILL_TRACE
+
+/* For initializing controller (mask in an HCFS mode too) */
+#define OHCI_CONTROL_INIT \
+ (OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
+
+#define readl(a) (*((volatile u32 *)(a)))
+#define writel(a, b) (*((volatile u32 *)(b)) = ((volatile u32)a))
+
+#define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
+
+#ifdef DEBUG
+#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
+#else
+#define dbg(format, arg...) do {} while(0)
+#endif /* DEBUG */
+#define err(format, arg...) printf("ERROR: " format "\n", ## arg)
+#ifdef SHOW_INFO
+#define info(format, arg...) printf("INFO: " format "\n", ## arg)
+#else
+#define info(format, arg...) do {} while(0)
+#endif
+
+#define m16_swap(x) swap_16(x)
+#define m32_swap(x) swap_32(x)
+
+#if defined(CONFIG_405EZ) || defined(CONFIG_440EP) || defined(CONFIG_440EPX)
+#define ohci_cpu_to_le16(x) (x)
+#define ohci_cpu_to_le32(x) (x)
+#else
+#define ohci_cpu_to_le16(x) swap_16(x)
+#define ohci_cpu_to_le32(x) swap_32(x)
+#endif
+
+/* global ohci_t */
+static ohci_t gohci;
+/* this must be aligned to a 256 byte boundary */
+struct ohci_hcca ghcca[1];
+/* a pointer to the aligned storage */
+struct ohci_hcca *phcca;
+/* this allocates EDs for all possible endpoints */
+struct ohci_device ohci_dev;
+/* urb_priv */
+urb_priv_t urb_priv;
+/* RHSC flag */
+int got_rhsc;
+/* device which was disconnected */
+struct usb_device *devgone;
+/* flag guarding URB transation */
+int urb_finished = 0;
+
+/*-------------------------------------------------------------------------*/
+
+/* AMD-756 (D2 rev) reports corrupt register contents in some cases.
+ * The erratum (#4) description is incorrect. AMD's workaround waits
+ * till some bits (mostly reserved) are clear; ok for all revs.
+ */
+#define OHCI_QUIRK_AMD756 0xabcd
+#define read_roothub(hc, register, mask) ({ \
+ u32 temp = readl (&hc->regs->roothub.register); \
+ if (hc->flags & OHCI_QUIRK_AMD756) \
+ while (temp & mask) \
+ temp = readl (&hc->regs->roothub.register); \
+ temp; })
+
+static u32 roothub_a (struct ohci *hc)
+ { return read_roothub (hc, a, 0xfc0fe000); }
+static inline u32 roothub_b (struct ohci *hc)
+ { return readl (&hc->regs->roothub.b); }
+static inline u32 roothub_status (struct ohci *hc)
+ { return readl (&hc->regs->roothub.status); }
+static u32 roothub_portstatus (struct ohci *hc, int i)
+ { return read_roothub (hc, portstatus [i], 0xffe0fce0); }
+
+
+/* forward declaration */
+static int hc_interrupt (void);
+static void
+td_submit_job (struct usb_device * dev, unsigned long pipe, void * buffer,
+ int transfer_len, struct devrequest * setup, urb_priv_t * urb, int interval);
+
+/*-------------------------------------------------------------------------*
+ * URB support functions
+ *-------------------------------------------------------------------------*/
+
+/* free HCD-private data associated with this URB */
+
+static void urb_free_priv (urb_priv_t * urb)
+{
+ int i;
+ int last;
+ struct td * td;
+
+ last = urb->length - 1;
+ if (last >= 0) {
+ for (i = 0; i <= last; i++) {
+ td = urb->td[i];
+ if (td) {
+ td->usb_dev = NULL;
+ urb->td[i] = NULL;
+ }
+ }
+ }
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef DEBUG
+static int sohci_get_current_frame_number (struct usb_device * dev);
+
+/* debug| print the main components of an URB
+ * small: 0) header + data packets 1) just header */
+
+static void pkt_print (struct usb_device * dev, unsigned long pipe, void * buffer,
+ int transfer_len, struct devrequest * setup, char * str, int small)
+{
+ urb_priv_t * purb = &urb_priv;
+
+ dbg("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d/%d stat:%#lx",
+ str,
+ sohci_get_current_frame_number (dev),
+ usb_pipedevice (pipe),
+ usb_pipeendpoint (pipe),
+ usb_pipeout (pipe)? 'O': 'I',
+ usb_pipetype (pipe) < 2? (usb_pipeint (pipe)? "INTR": "ISOC"):
+ (usb_pipecontrol (pipe)? "CTRL": "BULK"),
+ purb->actual_length,
+ transfer_len, dev->status);
+#ifdef OHCI_VERBOSE_DEBUG
+ if (!small) {
+ int i, len;
+
+ if (usb_pipecontrol (pipe)) {
+ printf (__FILE__ ": cmd(8):");
+ for (i = 0; i < 8 ; i++)
+ printf (" %02x", ((__u8 *) setup) [i]);
+ printf ("\n");
+ }
+ if (transfer_len > 0 && buffer) {
+ printf (__FILE__ ": data(%d/%d):",
+ purb->actual_length,
+ transfer_len);
+ len = usb_pipeout (pipe)?
+ transfer_len: purb->actual_length;
+ for (i = 0; i < 16 && i < len; i++)
+ printf (" %02x", ((__u8 *) buffer) [i]);
+ printf ("%s\n", i < len? "...": "");
+ }
+ }
+#endif
+}
+
+/* just for debugging; prints non-empty branches of the int ed tree inclusive iso eds*/
+void ep_print_int_eds (ohci_t *ohci, char * str) {
+ int i, j;
+ __u32 * ed_p;
+ for (i= 0; i < 32; i++) {
+ j = 5;
+ ed_p = &(ohci->hcca->int_table [i]);
+ if (*ed_p == 0)
+ continue;
+ printf (__FILE__ ": %s branch int %2d(%2x):", str, i, i);
+ while (*ed_p != 0 && j--) {
+ ed_t *ed = (ed_t *)ohci_cpu_to_le32(ed_p);
+ printf (" ed: %4x;", ed->hwINFO);
+ ed_p = &ed->hwNextED;
+ }
+ printf ("\n");
+ }
+}
+
+static void ohci_dump_intr_mask (char *label, __u32 mask)
+{
+ dbg ("%s: 0x%08x%s%s%s%s%s%s%s%s%s",
+ label,
+ mask,
+ (mask & OHCI_INTR_MIE) ? " MIE" : "",
+ (mask & OHCI_INTR_OC) ? " OC" : "",
+ (mask & OHCI_INTR_RHSC) ? " RHSC" : "",
+ (mask & OHCI_INTR_FNO) ? " FNO" : "",
+ (mask & OHCI_INTR_UE) ? " UE" : "",
+ (mask & OHCI_INTR_RD) ? " RD" : "",
+ (mask & OHCI_INTR_SF) ? " SF" : "",
+ (mask & OHCI_INTR_WDH) ? " WDH" : "",
+ (mask & OHCI_INTR_SO) ? " SO" : ""
+ );
+}
+
+static void maybe_print_eds (char *label, __u32 value)
+{
+ ed_t *edp = (ed_t *)value;
+
+ if (value) {
+ dbg ("%s %08x", label, value);
+ dbg ("%08x", edp->hwINFO);
+ dbg ("%08x", edp->hwTailP);
+ dbg ("%08x", edp->hwHeadP);
+ dbg ("%08x", edp->hwNextED);
+ }
+}
+
+static char * hcfs2string (int state)
+{
+ switch (state) {
+ case OHCI_USB_RESET: return "reset";
+ case OHCI_USB_RESUME: return "resume";
+ case OHCI_USB_OPER: return "operational";
+ case OHCI_USB_SUSPEND: return "suspend";
+ }
+ return "?";
+}
+
+/* dump control and status registers */
+static void ohci_dump_status (ohci_t *controller)
+{
+ struct ohci_regs *regs = controller->regs;
+ __u32 temp;
+
+ temp = readl (&regs->revision) & 0xff;
+ if (temp != 0x10)
+ dbg ("spec %d.%d", (temp >> 4), (temp & 0x0f));
+
+ temp = readl (&regs->control);
+ dbg ("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp,
+ (temp & OHCI_CTRL_RWE) ? " RWE" : "",
+ (temp & OHCI_CTRL_RWC) ? " RWC" : "",
+ (temp & OHCI_CTRL_IR) ? " IR" : "",
+ hcfs2string (temp & OHCI_CTRL_HCFS),
+ (temp & OHCI_CTRL_BLE) ? " BLE" : "",
+ (temp & OHCI_CTRL_CLE) ? " CLE" : "",
+ (temp & OHCI_CTRL_IE) ? " IE" : "",
+ (temp & OHCI_CTRL_PLE) ? " PLE" : "",
+ temp & OHCI_CTRL_CBSR
+ );
+
+ temp = readl (&regs->cmdstatus);
+ dbg ("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp,
+ (temp & OHCI_SOC) >> 16,
+ (temp & OHCI_OCR) ? " OCR" : "",
+ (temp & OHCI_BLF) ? " BLF" : "",
+ (temp & OHCI_CLF) ? " CLF" : "",
+ (temp & OHCI_HCR) ? " HCR" : ""
+ );
+
+ ohci_dump_intr_mask ("intrstatus", readl (&regs->intrstatus));
+ ohci_dump_intr_mask ("intrenable", readl (&regs->intrenable));
+
+ maybe_print_eds ("ed_periodcurrent", readl (&regs->ed_periodcurrent));
+
+ maybe_print_eds ("ed_controlhead", readl (&regs->ed_controlhead));
+ maybe_print_eds ("ed_controlcurrent", readl (&regs->ed_controlcurrent));
+
+ maybe_print_eds ("ed_bulkhead", readl (&regs->ed_bulkhead));
+ maybe_print_eds ("ed_bulkcurrent", readl (&regs->ed_bulkcurrent));
+
+ maybe_print_eds ("donehead", readl (&regs->donehead));
+}
+
+static void ohci_dump_roothub (ohci_t *controller, int verbose)
+{
+ __u32 temp, ndp, i;
+
+ temp = roothub_a (controller);
+ ndp = (temp & RH_A_NDP);
+
+ if (verbose) {
+ dbg ("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp,
+ ((temp & RH_A_POTPGT) >> 24) & 0xff,
+ (temp & RH_A_NOCP) ? " NOCP" : "",
+ (temp & RH_A_OCPM) ? " OCPM" : "",
+ (temp & RH_A_DT) ? " DT" : "",
+ (temp & RH_A_NPS) ? " NPS" : "",
+ (temp & RH_A_PSM) ? " PSM" : "",
+ ndp
+ );
+ temp = roothub_b (controller);
+ dbg ("roothub.b: %08x PPCM=%04x DR=%04x",
+ temp,
+ (temp & RH_B_PPCM) >> 16,
+ (temp & RH_B_DR)
+ );
+ temp = roothub_status (controller);
+ dbg ("roothub.status: %08x%s%s%s%s%s%s",
+ temp,
+ (temp & RH_HS_CRWE) ? " CRWE" : "",
+ (temp & RH_HS_OCIC) ? " OCIC" : "",
+ (temp & RH_HS_LPSC) ? " LPSC" : "",
+ (temp & RH_HS_DRWE) ? " DRWE" : "",
+ (temp & RH_HS_OCI) ? " OCI" : "",
+ (temp & RH_HS_LPS) ? " LPS" : ""
+ );
+ }
+
+ for (i = 0; i < ndp; i++) {
+ temp = roothub_portstatus (controller, i);
+ dbg ("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s",
+ i,
+ temp,
+ (temp & RH_PS_PRSC) ? " PRSC" : "",
+ (temp & RH_PS_OCIC) ? " OCIC" : "",
+ (temp & RH_PS_PSSC) ? " PSSC" : "",
+ (temp & RH_PS_PESC) ? " PESC" : "",
+ (temp & RH_PS_CSC) ? " CSC" : "",
+
+ (temp & RH_PS_LSDA) ? " LSDA" : "",
+ (temp & RH_PS_PPS) ? " PPS" : "",
+ (temp & RH_PS_PRS) ? " PRS" : "",
+ (temp & RH_PS_POCI) ? " POCI" : "",
+ (temp & RH_PS_PSS) ? " PSS" : "",
+
+ (temp & RH_PS_PES) ? " PES" : "",
+ (temp & RH_PS_CCS) ? " CCS" : ""
+ );
+ }
+}
+
+static void ohci_dump (ohci_t *controller, int verbose)
+{
+ dbg ("OHCI controller usb-%s state", controller->slot_name);
+
+ /* dumps some of the state we know about */
+ ohci_dump_status (controller);
+ if (verbose)
+ ep_print_int_eds (controller, "hcca");
+ dbg ("hcca frame #%04x", controller->hcca->frame_no);
+ ohci_dump_roothub (controller, 1);
+}
+
+
+#endif /* DEBUG */
+
+/*-------------------------------------------------------------------------*
+ * Interface functions (URB)
+ *-------------------------------------------------------------------------*/
+
+/* get a transfer request */
+
+int sohci_submit_job(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len, struct devrequest *setup, int interval)
+{
+ ohci_t *ohci;
+ ed_t * ed;
+ urb_priv_t *purb_priv;
+ int i, size = 0;
+
+ ohci = &gohci;
+
+ /* when controller's hung, permit only roothub cleanup attempts
+ * such as powering down ports */
+ if (ohci->disabled) {
+ err("sohci_submit_job: EPIPE");
+ return -1;
+ }
+
+ /* if we have an unfinished URB from previous transaction let's
+ * fail and scream as quickly as possible so as not to corrupt
+ * further communication */
+ if (!urb_finished) {
+ err("sohci_submit_job: URB NOT FINISHED");
+ return -1;
+ }
+ /* we're about to begin a new transaction here so mark the URB unfinished */
+ urb_finished = 0;
+
+ /* every endpoint has a ed, locate and fill it */
+ if (!(ed = ep_add_ed (dev, pipe))) {
+ err("sohci_submit_job: ENOMEM");
+ return -1;
+ }
+
+ /* for the private part of the URB we need the number of TDs (size) */
+ switch (usb_pipetype (pipe)) {
+ case PIPE_BULK: /* one TD for every 4096 Byte */
+ size = (transfer_len - 1) / 4096 + 1;
+ break;
+ case PIPE_CONTROL: /* 1 TD for setup, 1 for ACK and 1 for every 4096 B */
+ size = (transfer_len == 0)? 2:
+ (transfer_len - 1) / 4096 + 3;
+ break;
+ }
+
+ if (size >= (N_URB_TD - 1)) {
+ err("need %d TDs, only have %d", size, N_URB_TD);
+ return -1;
+ }
+ purb_priv = &urb_priv;
+ purb_priv->pipe = pipe;
+
+ /* fill the private part of the URB */
+ purb_priv->length = size;
+ purb_priv->ed = ed;
+ purb_priv->actual_length = 0;
+
+ /* allocate the TDs */
+ /* note that td[0] was allocated in ep_add_ed */
+ for (i = 0; i < size; i++) {
+ purb_priv->td[i] = td_alloc (dev);
+ if (!purb_priv->td[i]) {
+ purb_priv->length = i;
+ urb_free_priv (purb_priv);
+ err("sohci_submit_job: ENOMEM");
+ return -1;
+ }
+ }
+
+ if (ed->state == ED_NEW || (ed->state & ED_DEL)) {
+ urb_free_priv (purb_priv);
+ err("sohci_submit_job: EINVAL");
+ return -1;
+ }
+
+ /* link the ed into a chain if is not already */
+ if (ed->state != ED_OPER)
+ ep_link (ohci, ed);
+
+ /* fill the TDs and link it to the ed */
+ td_submit_job(dev, pipe, buffer, transfer_len, setup, purb_priv, interval);
+
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef DEBUG
+/* tell us the current USB frame number */
+
+static int sohci_get_current_frame_number (struct usb_device *usb_dev)
+{
+ ohci_t *ohci = &gohci;
+
+ return ohci_cpu_to_le16 (ohci->hcca->frame_no);
+}
+#endif
+
+/*-------------------------------------------------------------------------*
+ * ED handling functions
+ *-------------------------------------------------------------------------*/
+
+/* link an ed into one of the HC chains */
+
+static int ep_link (ohci_t *ohci, ed_t *edi)
+{
+ volatile ed_t *ed = edi;
+
+ ed->state = ED_OPER;
+
+ switch (ed->type) {
+ case PIPE_CONTROL:
+ ed->hwNextED = 0;
+ if (ohci->ed_controltail == NULL) {
+ writel (ed, &ohci->regs->ed_controlhead);
+ } else {
+ ohci->ed_controltail->hwNextED = ohci_cpu_to_le32 ((unsigned long)ed);
+ }
+ ed->ed_prev = ohci->ed_controltail;
+ if (!ohci->ed_controltail && !ohci->ed_rm_list[0] &&
+ !ohci->ed_rm_list[1] && !ohci->sleeping) {
+ ohci->hc_control |= OHCI_CTRL_CLE;
+ writel (ohci->hc_control, &ohci->regs->control);
+ }
+ ohci->ed_controltail = edi;
+ break;
+
+ case PIPE_BULK:
+ ed->hwNextED = 0;
+ if (ohci->ed_bulktail == NULL) {
+ writel (ed, &ohci->regs->ed_bulkhead);
+ } else {
+ ohci->ed_bulktail->hwNextED = ohci_cpu_to_le32 ((unsigned long)ed);
+ }
+ ed->ed_prev = ohci->ed_bulktail;
+ if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] &&
+ !ohci->ed_rm_list[1] && !ohci->sleeping) {
+ ohci->hc_control |= OHCI_CTRL_BLE;
+ writel (ohci->hc_control, &ohci->regs->control);
+ }
+ ohci->ed_bulktail = edi;
+ break;
+ }
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* unlink an ed from one of the HC chains.
+ * just the link to the ed is unlinked.
+ * the link from the ed still points to another operational ed or 0
+ * so the HC can eventually finish the processing of the unlinked ed */
+
+static int ep_unlink (ohci_t *ohci, ed_t *edi)
+{
+ volatile ed_t *ed = edi;
+
+ ed->hwINFO |= ohci_cpu_to_le32 (OHCI_ED_SKIP);
+
+ switch (ed->type) {
+ case PIPE_CONTROL:
+ if (ed->ed_prev == NULL) {
+ if (!ed->hwNextED) {
+ ohci->hc_control &= ~OHCI_CTRL_CLE;
+ writel (ohci->hc_control, &ohci->regs->control);
+ }
+ writel (ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_controlhead);
+ } else {
+ ed->ed_prev->hwNextED = ed->hwNextED;
+ }
+ if (ohci->ed_controltail == ed) {
+ ohci->ed_controltail = ed->ed_prev;
+ } else {
+ ((ed_t *)ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
+ }
+ break;
+
+ case PIPE_BULK:
+ if (ed->ed_prev == NULL) {
+ if (!ed->hwNextED) {
+ ohci->hc_control &= ~OHCI_CTRL_BLE;
+ writel (ohci->hc_control, &ohci->regs->control);
+ }
+ writel (ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_bulkhead);
+ } else {
+ ed->ed_prev->hwNextED = ed->hwNextED;
+ }
+ if (ohci->ed_bulktail == ed) {
+ ohci->ed_bulktail = ed->ed_prev;
+ } else {
+ ((ed_t *)ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
+ }
+ break;
+ }
+ ed->state = ED_UNLINK;
+ return 0;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* add/reinit an endpoint; this should be done once at the usb_set_configuration command,
+ * but the USB stack is a little bit stateless so we do it at every transaction
+ * if the state of the ed is ED_NEW then a dummy td is added and the state is changed to ED_UNLINK
+ * in all other cases the state is left unchanged
+ * the ed info fields are setted anyway even though most of them should not change */
+
+static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe)
+{
+ td_t *td;
+ ed_t *ed_ret;
+ volatile ed_t *ed;
+
+ ed = ed_ret = &ohci_dev.ed[(usb_pipeendpoint (pipe) << 1) |
+ (usb_pipecontrol (pipe)? 0: usb_pipeout (pipe))];
+
+ if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) {
+ err("ep_add_ed: pending delete");
+ /* pending delete request */
+ return NULL;
+ }
+
+ if (ed->state == ED_NEW) {
+ ed->hwINFO = ohci_cpu_to_le32 (OHCI_ED_SKIP); /* skip ed */
+ /* dummy td; end of td list for ed */
+ td = td_alloc (usb_dev);
+ ed->hwTailP = ohci_cpu_to_le32 ((unsigned long)td);
+ ed->hwHeadP = ed->hwTailP;
+ ed->state = ED_UNLINK;
+ ed->type = usb_pipetype (pipe);
+ ohci_dev.ed_cnt++;
+ }
+
+ ed->hwINFO = ohci_cpu_to_le32 (usb_pipedevice (pipe)
+ | usb_pipeendpoint (pipe) << 7
+ | (usb_pipeisoc (pipe)? 0x8000: 0)
+ | (usb_pipecontrol (pipe)? 0: (usb_pipeout (pipe)? 0x800: 0x1000))
+ | usb_pipeslow (pipe) << 13
+ | usb_maxpacket (usb_dev, pipe) << 16);
+
+ return ed_ret;
+}
+
+/*-------------------------------------------------------------------------*
+ * TD handling functions
+ *-------------------------------------------------------------------------*/
+
+/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */
+
+static void td_fill (ohci_t *ohci, unsigned int info,
+ void *data, int len,
+ struct usb_device *dev, int index, urb_priv_t *urb_priv)
+{
+ volatile td_t *td, *td_pt;
+#ifdef OHCI_FILL_TRACE
+ int i;
+#endif
+
+ if (index > urb_priv->length) {
+ err("index > length");
+ return;
+ }
+ /* use this td as the next dummy */
+ td_pt = urb_priv->td [index];
+ td_pt->hwNextTD = 0;
+
+ /* fill the old dummy TD */
+ td = urb_priv->td [index] = (td_t *)(ohci_cpu_to_le32 (urb_priv->ed->hwTailP) & ~0xf);
+
+ td->ed = urb_priv->ed;
+ td->next_dl_td = NULL;
+ td->index = index;
+ td->data = (__u32)data;
+#ifdef OHCI_FILL_TRACE
+ if (usb_pipebulk(urb_priv->pipe) && usb_pipeout(urb_priv->pipe)) {
+ for (i = 0; i < len; i++)
+ printf("td->data[%d] %#2x ",i, ((unsigned char *)td->data)[i]);
+ printf("\n");
+ }
+#endif
+ if (!len)
+ data = 0;
+
+ td->hwINFO = ohci_cpu_to_le32 (info);
+ td->hwCBP = ohci_cpu_to_le32 ((unsigned long)data);
+ if (data)
+ td->hwBE = ohci_cpu_to_le32 ((unsigned long)(data + len - 1));
+ else
+ td->hwBE = 0;
+ td->hwNextTD = ohci_cpu_to_le32 ((unsigned long)td_pt);
+
+ /* append to queue */
+ td->ed->hwTailP = td->hwNextTD;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* prepare all TDs of a transfer */
+static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len, struct devrequest *setup, urb_priv_t *urb, int interval)
+{
+ ohci_t *ohci = &gohci;
+ int data_len = transfer_len;
+ void *data;
+ int cnt = 0;
+ __u32 info = 0;
+ unsigned int toggle = 0;
+
+ /* OHCI handles the DATA-toggles itself, we just use the USB-toggle bits for reseting */
+ if(usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
+ toggle = TD_T_TOGGLE;
+ } else {
+ toggle = TD_T_DATA0;
+ usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 1);
+ }
+ urb->td_cnt = 0;
+ if (data_len)
+ data = buffer;
+ else
+ data = 0;
+
+ switch (usb_pipetype (pipe)) {
+ case PIPE_BULK:
+ info = usb_pipeout (pipe)?
+ TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN ;
+ while(data_len > 4096) {
+ td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, 4096, dev, cnt, urb);
+ data += 4096; data_len -= 4096; cnt++;
+ }
+ info = usb_pipeout (pipe)?
+ TD_CC | TD_DP_OUT : TD_CC | TD_R | TD_DP_IN ;
+ td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, data_len, dev, cnt, urb);
+ cnt++;
+
+ if (!ohci->sleeping)
+ writel (OHCI_BLF, &ohci->regs->cmdstatus); /* start bulk list */
+ break;
+
+ case PIPE_CONTROL:
+ info = TD_CC | TD_DP_SETUP | TD_T_DATA0;
+ td_fill (ohci, info, setup, 8, dev, cnt++, urb);
+ if (data_len > 0) {
+ info = usb_pipeout (pipe)?
+ TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 : TD_CC | TD_R | TD_DP_IN | TD_T_DATA1;
+ /* NOTE: mishandles transfers >8K, some >4K */
+ td_fill (ohci, info, data, data_len, dev, cnt++, urb);
+ }
+ info = usb_pipeout (pipe)?
+ TD_CC | TD_DP_IN | TD_T_DATA1: TD_CC | TD_DP_OUT | TD_T_DATA1;
+ td_fill (ohci, info, data, 0, dev, cnt++, urb);
+ if (!ohci->sleeping)
+ writel (OHCI_CLF, &ohci->regs->cmdstatus); /* start Control list */
+ break;
+ }
+ if (urb->length != cnt)
+ dbg("TD LENGTH %d != CNT %d", urb->length, cnt);
+}
+
+/*-------------------------------------------------------------------------*
+ * Done List handling functions
+ *-------------------------------------------------------------------------*/
+
+
+/* calculate the transfer length and update the urb */
+
+static void dl_transfer_length(td_t * td)
+{
+ __u32 tdINFO, tdBE, tdCBP;
+ urb_priv_t *lurb_priv = &urb_priv;
+
+ tdINFO = ohci_cpu_to_le32 (td->hwINFO);
+ tdBE = ohci_cpu_to_le32 (td->hwBE);
+ tdCBP = ohci_cpu_to_le32 (td->hwCBP);
+
+
+ if (!(usb_pipecontrol(lurb_priv->pipe) &&
+ ((td->index == 0) || (td->index == lurb_priv->length - 1)))) {
+ if (tdBE != 0) {
+ if (td->hwCBP == 0)
+ lurb_priv->actual_length += tdBE - td->data + 1;
+ else
+ lurb_priv->actual_length += tdCBP - td->data;
+ }
+ }
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* replies to the request have to be on a FIFO basis so
+ * we reverse the reversed done-list */
+
+static td_t * dl_reverse_done_list (ohci_t *ohci)
+{
+ __u32 td_list_hc;
+ td_t *td_rev = NULL;
+ td_t *td_list = NULL;
+ urb_priv_t *lurb_priv = NULL;
+
+ td_list_hc = ohci_cpu_to_le32 (ohci->hcca->done_head) & 0xfffffff0;
+ ohci->hcca->done_head = 0;
+
+ while (td_list_hc) {
+ td_list = (td_t *)td_list_hc;
+
+ if (TD_CC_GET (ohci_cpu_to_le32 (td_list->hwINFO))) {
+ lurb_priv = &urb_priv;
+ dbg(" USB-error/status: %x : %p",
+ TD_CC_GET (ohci_cpu_to_le32 (td_list->hwINFO)), td_list);
+ if (td_list->ed->hwHeadP & ohci_cpu_to_le32 (0x1)) {
+ if (lurb_priv && ((td_list->index + 1) < lurb_priv->length)) {
+ td_list->ed->hwHeadP =
+ (lurb_priv->td[lurb_priv->length - 1]->hwNextTD & ohci_cpu_to_le32 (0xfffffff0)) |
+ (td_list->ed->hwHeadP & ohci_cpu_to_le32 (0x2));
+ lurb_priv->td_cnt += lurb_priv->length - td_list->index - 1;
+ } else
+ td_list->ed->hwHeadP &= ohci_cpu_to_le32 (0xfffffff2);
+ }
+#ifdef CONFIG_MPC5200
+ td_list->hwNextTD = 0;
+#endif
+ }
+
+ td_list->next_dl_td = td_rev;
+ td_rev = td_list;
+ td_list_hc = ohci_cpu_to_le32 (td_list->hwNextTD) & 0xfffffff0;
+ }
+ return td_list;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* td done list */
+static int dl_done_list (ohci_t *ohci, td_t *td_list)
+{
+ td_t *td_list_next = NULL;
+ ed_t *ed;
+ int cc = 0;
+ int stat = 0;
+ /* urb_t *urb; */
+ urb_priv_t *lurb_priv;
+ __u32 tdINFO, edHeadP, edTailP;
+
+ while (td_list) {
+ td_list_next = td_list->next_dl_td;
+
+ lurb_priv = &urb_priv;
+ tdINFO = ohci_cpu_to_le32 (td_list->hwINFO);
+
+ ed = td_list->ed;
+
+ dl_transfer_length(td_list);
+
+ /* error code of transfer */
+ cc = TD_CC_GET (tdINFO);
+ if (++(lurb_priv->td_cnt) == lurb_priv->length) {
+ if ((ed->state & (ED_OPER | ED_UNLINK))
+ && (lurb_priv->state != URB_DEL)) {
+ dbg("ConditionCode %#x", cc);
+ stat = cc_to_error[cc];
+ urb_finished = 1;
+ }
+ }
+
+ if (ed->state != ED_NEW) {
+ edHeadP = ohci_cpu_to_le32 (ed->hwHeadP) & 0xfffffff0;
+ edTailP = ohci_cpu_to_le32 (ed->hwTailP);
+
+ /* unlink eds if they are not busy */
+ if ((edHeadP == edTailP) && (ed->state == ED_OPER))
+ ep_unlink (ohci, ed);
+ }
+
+ td_list = td_list_next;
+ }
+ return stat;
+}
+
+/*-------------------------------------------------------------------------*
+ * Virtual Root Hub
+ *-------------------------------------------------------------------------*/
+
+/* Device descriptor */
+static __u8 root_hub_dev_des[] =
+{
+ 0x12, /* __u8 bLength; */
+ 0x01, /* __u8 bDescriptorType; Device */
+ 0x10, /* __u16 bcdUSB; v1.1 */
+ 0x01,
+ 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 bDeviceSubClass; */
+ 0x00, /* __u8 bDeviceProtocol; */
+ 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
+ 0x00, /* __u16 idVendor; */
+ 0x00,
+ 0x00, /* __u16 idProduct; */
+ 0x00,
+ 0x00, /* __u16 bcdDevice; */
+ 0x00,
+ 0x00, /* __u8 iManufacturer; */
+ 0x01, /* __u8 iProduct; */
+ 0x00, /* __u8 iSerialNumber; */
+ 0x01 /* __u8 bNumConfigurations; */
+};
+
+
+/* Configuration descriptor */
+static __u8 root_hub_config_des[] =
+{
+ 0x09, /* __u8 bLength; */
+ 0x02, /* __u8 bDescriptorType; Configuration */
+ 0x19, /* __u16 wTotalLength; */
+ 0x00,
+ 0x01, /* __u8 bNumInterfaces; */
+ 0x01, /* __u8 bConfigurationValue; */
+ 0x00, /* __u8 iConfiguration; */
+ 0x40, /* __u8 bmAttributes;
+ Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
+ 0x00, /* __u8 MaxPower; */
+
+ /* interface */
+ 0x09, /* __u8 if_bLength; */
+ 0x04, /* __u8 if_bDescriptorType; Interface */
+ 0x00, /* __u8 if_bInterfaceNumber; */
+ 0x00, /* __u8 if_bAlternateSetting; */
+ 0x01, /* __u8 if_bNumEndpoints; */
+ 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 if_bInterfaceSubClass; */
+ 0x00, /* __u8 if_bInterfaceProtocol; */
+ 0x00, /* __u8 if_iInterface; */
+
+ /* endpoint */
+ 0x07, /* __u8 ep_bLength; */
+ 0x05, /* __u8 ep_bDescriptorType; Endpoint */
+ 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
+ 0x03, /* __u8 ep_bmAttributes; Interrupt */
+ 0x02, /* __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
+ 0x00,
+ 0xff /* __u8 ep_bInterval; 255 ms */
+};
+
+static unsigned char root_hub_str_index0[] =
+{
+ 0x04, /* __u8 bLength; */
+ 0x03, /* __u8 bDescriptorType; String-descriptor */
+ 0x09, /* __u8 lang ID */
+ 0x04, /* __u8 lang ID */
+};
+
+static unsigned char root_hub_str_index1[] =
+{
+ 28, /* __u8 bLength; */
+ 0x03, /* __u8 bDescriptorType; String-descriptor */
+ 'O', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'H', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'C', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'I', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ ' ', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'R', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'o', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'o', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 't', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ ' ', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'H', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'u', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'b', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+};
+
+/* Hub class-specific descriptor is constructed dynamically */
+
+
+/*-------------------------------------------------------------------------*/
+
+#define OK(x) len = (x); break
+#ifdef DEBUG
+#define WR_RH_STAT(x) {info("WR:status %#8x", (x));writel((x), &gohci.regs->roothub.status);}
+#define WR_RH_PORTSTAT(x) {info("WR:portstatus[%d] %#8x", wIndex-1, (x));writel((x), &gohci.regs->roothub.portstatus[wIndex-1]);}
+#else
+#define WR_RH_STAT(x) writel((x), &gohci.regs->roothub.status)
+#define WR_RH_PORTSTAT(x) writel((x), &gohci.regs->roothub.portstatus[wIndex-1])
+#endif
+#define RD_RH_STAT roothub_status(&gohci)
+#define RD_RH_PORTSTAT roothub_portstatus(&gohci,wIndex-1)
+
+/* request to virtual root hub */
+
+int rh_check_port_status(ohci_t *controller)
+{
+ __u32 temp, ndp, i;
+ int res;
+
+ res = -1;
+ temp = roothub_a (controller);
+ ndp = (temp & RH_A_NDP);
+ for (i = 0; i < ndp; i++) {
+ temp = roothub_portstatus (controller, i);
+ /* check for a device disconnect */
+ if (((temp & (RH_PS_PESC | RH_PS_CSC)) ==
+ (RH_PS_PESC | RH_PS_CSC)) &&
+ ((temp & RH_PS_CCS) == 0)) {
+ res = i;
+ break;
+ }
+ }
+ return res;
+}
+
+static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
+ void *buffer, int transfer_len, struct devrequest *cmd)
+{
+ void * data = buffer;
+ int leni = transfer_len;
+ int len = 0;
+ int stat = 0;
+ __u32 datab[4];
+ __u8 *data_buf = (__u8 *)datab;
+ __u16 bmRType_bReq;
+ __u16 wValue;
+ __u16 wIndex;
+ __u16 wLength;
+
+#ifdef DEBUG
+urb_priv.actual_length = 0;
+pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
+#endif
+ if (usb_pipeint(pipe)) {
+ info("Root-Hub submit IRQ: NOT implemented");
+ return 0;
+ }
+
+ bmRType_bReq = cmd->requesttype | (cmd->request << 8);
+ wValue = m16_swap (cmd->value);
+ wIndex = m16_swap (cmd->index);
+ wLength = m16_swap (cmd->length);
+
+ info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x",
+ dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength);
+
+ switch (bmRType_bReq) {
+ /* Request Destination:
+ without flags: Device,
+ RH_INTERFACE: interface,
+ RH_ENDPOINT: endpoint,
+ RH_CLASS means HUB here,
+ RH_OTHER | RH_CLASS almost ever means HUB_PORT here
+ */
+
+ case RH_GET_STATUS:
+ *(__u16 *) data_buf = m16_swap (1); OK (2);
+ case RH_GET_STATUS | RH_INTERFACE:
+ *(__u16 *) data_buf = m16_swap (0); OK (2);
+ case RH_GET_STATUS | RH_ENDPOINT:
+ *(__u16 *) data_buf = m16_swap (0); OK (2);
+ case RH_GET_STATUS | RH_CLASS:
+ *(__u32 *) data_buf = m32_swap (
+ RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE));
+ OK (4);
+ case RH_GET_STATUS | RH_OTHER | RH_CLASS:
+ *(__u32 *) data_buf = m32_swap (RD_RH_PORTSTAT); OK (4);
+
+ case RH_CLEAR_FEATURE | RH_ENDPOINT:
+ switch (wValue) {
+ case (RH_ENDPOINT_STALL): OK (0);
+ }
+ break;
+
+ case RH_CLEAR_FEATURE | RH_CLASS:
+ switch (wValue) {
+ case RH_C_HUB_LOCAL_POWER:
+ OK(0);
+ case (RH_C_HUB_OVER_CURRENT):
+ WR_RH_STAT(RH_HS_OCIC); OK (0);
+ }
+ break;
+
+ case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
+ switch (wValue) {
+ case (RH_PORT_ENABLE):
+ WR_RH_PORTSTAT (RH_PS_CCS ); OK (0);
+ case (RH_PORT_SUSPEND):
+ WR_RH_PORTSTAT (RH_PS_POCI); OK (0);
+ case (RH_PORT_POWER):
+ WR_RH_PORTSTAT (RH_PS_LSDA); OK (0);
+ case (RH_C_PORT_CONNECTION):
+ WR_RH_PORTSTAT (RH_PS_CSC ); OK (0);
+ case (RH_C_PORT_ENABLE):
+ WR_RH_PORTSTAT (RH_PS_PESC); OK (0);
+ case (RH_C_PORT_SUSPEND):
+ WR_RH_PORTSTAT (RH_PS_PSSC); OK (0);
+ case (RH_C_PORT_OVER_CURRENT):
+ WR_RH_PORTSTAT (RH_PS_OCIC); OK (0);
+ case (RH_C_PORT_RESET):
+ WR_RH_PORTSTAT (RH_PS_PRSC); OK (0);
+ }
+ break;
+
+ case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
+ switch (wValue) {
+ case (RH_PORT_SUSPEND):
+ WR_RH_PORTSTAT (RH_PS_PSS ); OK (0);
+ case (RH_PORT_RESET): /* BUG IN HUP CODE *********/
+ if (RD_RH_PORTSTAT & RH_PS_CCS)
+ WR_RH_PORTSTAT (RH_PS_PRS);
+ OK (0);
+ case (RH_PORT_POWER):
+ WR_RH_PORTSTAT (RH_PS_PPS ); OK (0);
+ case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/
+ if (RD_RH_PORTSTAT & RH_PS_CCS)
+ WR_RH_PORTSTAT (RH_PS_PES );
+ OK (0);
+ }
+ break;
+
+ case RH_SET_ADDRESS: gohci.rh.devnum = wValue; OK(0);
+
+ case RH_GET_DESCRIPTOR:
+ switch ((wValue & 0xff00) >> 8) {
+ case (0x01): /* device descriptor */
+ len = min_t(unsigned int,
+ leni,
+ min_t(unsigned int,
+ sizeof (root_hub_dev_des),
+ wLength));
+ data_buf = root_hub_dev_des; OK(len);
+ case (0x02): /* configuration descriptor */
+ len = min_t(unsigned int,
+ leni,
+ min_t(unsigned int,
+ sizeof (root_hub_config_des),
+ wLength));
+ data_buf = root_hub_config_des; OK(len);
+ case (0x03): /* string descriptors */
+ if(wValue==0x0300) {
+ len = min_t(unsigned int,
+ leni,
+ min_t(unsigned int,
+ sizeof (root_hub_str_index0),
+ wLength));
+ data_buf = root_hub_str_index0;
+ OK(len);
+ }
+ if(wValue==0x0301) {
+ len = min_t(unsigned int,
+ leni,
+ min_t(unsigned int,
+ sizeof (root_hub_str_index1),
+ wLength));
+ data_buf = root_hub_str_index1;
+ OK(len);
+ }
+ default:
+ stat = USB_ST_STALLED;
+ }
+ break;
+
+ case RH_GET_DESCRIPTOR | RH_CLASS:
+ {
+ __u32 temp = roothub_a (&gohci);
+
+ data_buf [0] = 9; /* min length; */
+ data_buf [1] = 0x29;
+ data_buf [2] = temp & RH_A_NDP;
+ data_buf [3] = 0;
+ if (temp & RH_A_PSM) /* per-port power switching? */
+ data_buf [3] |= 0x1;
+ if (temp & RH_A_NOCP) /* no overcurrent reporting? */
+ data_buf [3] |= 0x10;
+ else if (temp & RH_A_OCPM) /* per-port overcurrent reporting? */
+ data_buf [3] |= 0x8;
+
+ /* corresponds to data_buf[4-7] */
+ datab [1] = 0;
+ data_buf [5] = (temp & RH_A_POTPGT) >> 24;
+ temp = roothub_b (&gohci);
+ data_buf [7] = temp & RH_B_DR;
+ if (data_buf [2] < 7) {
+ data_buf [8] = 0xff;
+ } else {
+ data_buf [0] += 2;
+ data_buf [8] = (temp & RH_B_DR) >> 8;
+ data_buf [10] = data_buf [9] = 0xff;
+ }
+
+ len = min_t(unsigned int, leni,
+ min_t(unsigned int, data_buf [0], wLength));
+ OK (len);
+ }
+
+ case RH_GET_CONFIGURATION: *(__u8 *) data_buf = 0x01; OK (1);
+
+ case RH_SET_CONFIGURATION: WR_RH_STAT (0x10000); OK (0);
+
+ default:
+ dbg ("unsupported root hub command");
+ stat = USB_ST_STALLED;
+ }
+
+#ifdef DEBUG
+ ohci_dump_roothub (&gohci, 1);
+#endif
+
+ len = min_t(int, len, leni);
+ if (data != data_buf)
+ memcpy (data, data_buf, len);
+ dev->act_len = len;
+ dev->status = stat;
+
+#ifdef DEBUG
+ if (transfer_len)
+ urb_priv.actual_length = transfer_len;
+ pkt_print(dev, pipe, buffer, transfer_len, cmd, "RET(rh)", 0/*usb_pipein(pipe)*/);
+#endif
+
+ return stat;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* common code for handling submit messages - used for all but root hub */
+/* accesses. */
+int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len, struct devrequest *setup, int interval)
+{
+ int stat = 0;
+ int maxsize = usb_maxpacket(dev, pipe);
+ int timeout;
+
+ /* device pulled? Shortcut the action. */
+ if (devgone == dev) {
+ dev->status = USB_ST_CRC_ERR;
+ return 0;
+ }
+
+#ifdef DEBUG
+ urb_priv.actual_length = 0;
+ pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
+#endif
+ if (!maxsize) {
+ err("submit_common_message: pipesize for pipe %lx is zero",
+ pipe);
+ return -1;
+ }
+
+ if (sohci_submit_job(dev, pipe, buffer, transfer_len, setup, interval) < 0) {
+ err("sohci_submit_job failed");
+ return -1;
+ }
+
+ /* allow more time for a BULK device to react - some are slow */
+#define BULK_TO 5000 /* timeout in milliseconds */
+ if (usb_pipebulk(pipe))
+ timeout = BULK_TO;
+ else
+ timeout = 100;
+
+ /* wait for it to complete */
+ for (;;) {
+ /* check whether the controller is done */
+ stat = hc_interrupt();
+ if (stat < 0) {
+ stat = USB_ST_CRC_ERR;
+ break;
+ }
+
+ /* NOTE: since we are not interrupt driven in U-Boot and always
+ * handle only one URB at a time, we cannot assume the
+ * transaction finished on the first successful return from
+ * hc_interrupt().. unless the flag for current URB is set,
+ * meaning that all TD's to/from device got actually
+ * transferred and processed. If the current URB is not
+ * finished we need to re-iterate this loop so as
+ * hc_interrupt() gets called again as there needs to be some
+ * more TD's to process still */
+ if ((stat >= 0) && (stat != 0xff) && (urb_finished)) {
+ /* 0xff is returned for an SF-interrupt */
+ break;
+ }
+
+ if (--timeout) {
+ wait_ms(1);
+ if (!urb_finished)
+ dbg("\%");
+
+ } else {
+ err("CTL:TIMEOUT ");
+ dbg("submit_common_msg: TO status %x\n", stat);
+ stat = USB_ST_CRC_ERR;
+ urb_finished = 1;
+ break;
+ }
+ }
+#if 0
+ /* we got an Root Hub Status Change interrupt */
+ if (got_rhsc) {
+#ifdef DEBUG
+ ohci_dump_roothub (&gohci, 1);
+#endif
+ got_rhsc = 0;
+ /* abuse timeout */
+ timeout = rh_check_port_status(&gohci);
+ if (timeout >= 0) {
+#if 0 /* this does nothing useful, but leave it here in case that changes */
+ /* the called routine adds 1 to the passed value */
+ usb_hub_port_connect_change(gohci.rh.dev, timeout - 1);
+#endif
+ /*
+ * XXX
+ * This is potentially dangerous because it assumes
+ * that only one device is ever plugged in!
+ */
+ devgone = dev;
+ }
+ }
+#endif
+
+ dev->status = stat;
+ dev->act_len = transfer_len;
+
+#ifdef DEBUG
+ pkt_print(dev, pipe, buffer, transfer_len, setup, "RET(ctlr)", usb_pipein(pipe));
+#endif
+
+ /* free TDs in urb_priv */
+ urb_free_priv (&urb_priv);
+ return 0;
+}
+
+/* submit routines called from usb.c */
+int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len)
+{
+ info("submit_bulk_msg");
+ return submit_common_msg(dev, pipe, buffer, transfer_len, NULL, 0);
+}
+
+int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len, struct devrequest *setup)
+{
+ int maxsize = usb_maxpacket(dev, pipe);
+
+ info("submit_control_msg");
+#ifdef DEBUG
+ urb_priv.actual_length = 0;
+ pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
+#endif
+ if (!maxsize) {
+ err("submit_control_message: pipesize for pipe %lx is zero",
+ pipe);
+ return -1;
+ }
+ if (((pipe >> 8) & 0x7f) == gohci.rh.devnum) {
+ gohci.rh.dev = dev;
+ /* root hub - redirect */
+ return ohci_submit_rh_msg(dev, pipe, buffer, transfer_len,
+ setup);
+ }
+
+ return submit_common_msg(dev, pipe, buffer, transfer_len, setup, 0);
+}
+
+int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len, int interval)
+{
+ info("submit_int_msg");
+ return -1;
+}
+
+/*-------------------------------------------------------------------------*
+ * HC functions
+ *-------------------------------------------------------------------------*/
+
+/* reset the HC and BUS */
+
+static int hc_reset (ohci_t *ohci)
+{
+ int timeout = 30;
+ int smm_timeout = 50; /* 0,5 sec */
+
+ if (readl (&ohci->regs->control) & OHCI_CTRL_IR) { /* SMM owns the HC */
+ writel (OHCI_OCR, &ohci->regs->cmdstatus); /* request ownership */
+ info("USB HC TakeOver from SMM");
+ while (readl (&ohci->regs->control) & OHCI_CTRL_IR) {
+ wait_ms (10);
+ if (--smm_timeout == 0) {
+ err("USB HC TakeOver failed!");
+ return -1;
+ }
+ }
+ }
+
+ /* Disable HC interrupts */
+ writel (OHCI_INTR_MIE, &ohci->regs->intrdisable);
+
+ dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;",
+ ohci->slot_name,
+ readl (&ohci->regs->control));
+
+ /* Reset USB (needed by some controllers) */
+ ohci->hc_control = 0;
+ writel (ohci->hc_control, &ohci->regs->control);
+
+ /* HC Reset requires max 10 us delay */
+ writel (OHCI_HCR, &ohci->regs->cmdstatus);
+ while ((readl (&ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
+ if (--timeout == 0) {
+ err("USB HC reset timed out!");
+ return -1;
+ }
+ udelay (1);
+ }
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Start an OHCI controller, set the BUS operational
+ * enable interrupts
+ * connect the virtual root hub */
+
+static int hc_start (ohci_t * ohci)
+{
+ __u32 mask;
+ unsigned int fminterval;
+
+ ohci->disabled = 1;
+
+ /* Tell the controller where the control and bulk lists are
+ * The lists are empty now. */
+
+ writel (0, &ohci->regs->ed_controlhead);
+ writel (0, &ohci->regs->ed_bulkhead);
+
+ writel ((__u32)ohci->hcca, &ohci->regs->hcca); /* a reset clears this */
+
+ fminterval = 0x2edf;
+ writel ((fminterval * 9) / 10, &ohci->regs->periodicstart);
+ fminterval |= ((((fminterval - 210) * 6) / 7) << 16);
+ writel (fminterval, &ohci->regs->fminterval);
+ writel (0x628, &ohci->regs->lsthresh);
+
+ /* start controller operations */
+ ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER;
+ ohci->disabled = 0;
+ writel (ohci->hc_control, &ohci->regs->control);
+
+ /* disable all interrupts */
+ mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD |
+ OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC |
+ OHCI_INTR_OC | OHCI_INTR_MIE);
+ writel (mask, &ohci->regs->intrdisable);
+ /* clear all interrupts */
+ mask &= ~OHCI_INTR_MIE;
+ writel (mask, &ohci->regs->intrstatus);
+ /* Choose the interrupts we care about now - but w/o MIE */
+ mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO;
+ writel (mask, &ohci->regs->intrenable);
+
+#ifdef OHCI_USE_NPS
+ /* required for AMD-756 and some Mac platforms */
+ writel ((roothub_a (ohci) | RH_A_NPS) & ~RH_A_PSM,
+ &ohci->regs->roothub.a);
+ writel (RH_HS_LPSC, &ohci->regs->roothub.status);
+#endif /* OHCI_USE_NPS */
+
+#define mdelay(n) ({unsigned long msec=(n); while (msec--) udelay(1000);})
+ /* POTPGT delay is bits 24-31, in 2 ms units. */
+ mdelay ((roothub_a (ohci) >> 23) & 0x1fe);
+
+ /* connect the virtual root hub */
+ ohci->rh.devnum = 0;
+
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* an interrupt happens */
+
+static int
+hc_interrupt (void)
+{
+ ohci_t *ohci = &gohci;
+ struct ohci_regs *regs = ohci->regs;
+ int ints;
+ int stat = -1;
+
+ if ((ohci->hcca->done_head != 0) &&
+ !(ohci_cpu_to_le32(ohci->hcca->done_head) & 0x01)) {
+
+ ints = OHCI_INTR_WDH;
+
+ } else if ((ints = readl (&regs->intrstatus)) == ~(u32)0) {
+ ohci->disabled++;
+ err ("%s device removed!", ohci->slot_name);
+ return -1;
+
+ } else if ((ints &= readl (&regs->intrenable)) == 0) {
+ dbg("hc_interrupt: returning..\n");
+ return 0xff;
+ }
+
+ /* dbg("Interrupt: %x frame: %x", ints, le16_to_cpu (ohci->hcca->frame_no)); */
+
+ if (ints & OHCI_INTR_RHSC) {
+ got_rhsc = 1;
+ stat = 0xff;
+ }
+
+ if (ints & OHCI_INTR_UE) {
+ ohci->disabled++;
+ err ("OHCI Unrecoverable Error, controller usb-%s disabled",
+ ohci->slot_name);
+ /* e.g. due to PCI Master/Target Abort */
+
+#ifdef DEBUG
+ ohci_dump (ohci, 1);
+#endif
+ /* FIXME: be optimistic, hope that bug won't repeat often. */
+ /* Make some non-interrupt context restart the controller. */
+ /* Count and limit the retries though; either hardware or */
+ /* software errors can go forever... */
+ hc_reset (ohci);
+ return -1;
+ }
+
+ if (ints & OHCI_INTR_WDH) {
+ writel (OHCI_INTR_WDH, &regs->intrdisable);
+ stat = dl_done_list (&gohci, dl_reverse_done_list (&gohci));
+ writel (OHCI_INTR_WDH, &regs->intrenable);
+ }
+
+ if (ints & OHCI_INTR_SO) {
+ dbg("USB Schedule overrun\n");
+ writel (OHCI_INTR_SO, &regs->intrenable);
+ stat = -1;
+ }
+
+ /* FIXME: this assumes SOF (1/ms) interrupts don't get lost... */
+ if (ints & OHCI_INTR_SF) {
+ unsigned int frame = ohci_cpu_to_le16 (ohci->hcca->frame_no) & 1;
+ wait_ms(1);
+ writel (OHCI_INTR_SF, &regs->intrdisable);
+ if (ohci->ed_rm_list[frame] != NULL)
+ writel (OHCI_INTR_SF, &regs->intrenable);
+ stat = 0xff;
+ }
+
+ writel (ints, &regs->intrstatus);
+ return stat;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*-------------------------------------------------------------------------*/
+
+/* De-allocate all resources.. */
+
+static void hc_release_ohci (ohci_t *ohci)
+{
+ dbg ("USB HC release ohci usb-%s", ohci->slot_name);
+
+ if (!ohci->disabled)
+ hc_reset (ohci);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * low level initalisation routine, called from usb.c
+ */
+static char ohci_inited = 0;
+
+int usb_lowlevel_init(void)
+{
+ memset (&gohci, 0, sizeof (ohci_t));
+ memset (&urb_priv, 0, sizeof (urb_priv_t));
+
+ /* align the storage */
+ if ((__u32)&ghcca[0] & 0xff) {
+ err("HCCA not aligned!!");
+ return -1;
+ }
+ phcca = &ghcca[0];
+ info("aligned ghcca %p", phcca);
+ memset(&ohci_dev, 0, sizeof(struct ohci_device));
+ if ((__u32)&ohci_dev.ed[0] & 0x7) {
+ err("EDs not aligned!!");
+ return -1;
+ }
+ memset(gtd, 0, sizeof(td_t) * (NUM_TD + 1));
+ if ((__u32)gtd & 0x7) {
+ err("TDs not aligned!!");
+ return -1;
+ }
+ ptd = gtd;
+ gohci.hcca = phcca;
+ memset (phcca, 0, sizeof (struct ohci_hcca));
+
+ gohci.disabled = 1;
+ gohci.sleeping = 0;
+ gohci.irq = -1;
+#if defined(CONFIG_440EP)
+ gohci.regs = (struct ohci_regs *)(CONFIG_SYS_PERIPHERAL_BASE | 0x1000);
+#elif defined(CONFIG_440EPX) || defined(CONFIG_SYS_USB_HOST)
+ gohci.regs = (struct ohci_regs *)(CONFIG_SYS_USB_HOST);
+#endif
+
+ gohci.flags = 0;
+ gohci.slot_name = "ppc440";
+
+ if (hc_reset (&gohci) < 0) {
+ hc_release_ohci (&gohci);
+ return -1;
+ }
+
+ if (hc_start (&gohci) < 0) {
+ err ("can't start usb-%s", gohci.slot_name);
+ hc_release_ohci (&gohci);
+ return -1;
+ }
+
+#ifdef DEBUG
+ ohci_dump (&gohci, 1);
+#endif
+ ohci_inited = 1;
+ urb_finished = 1;
+
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPX)
+ /* init the device driver */
+ usb_dev_init();
+#endif
+
+ return 0;
+}
+
+int usb_lowlevel_stop(void)
+{
+ /* this gets called really early - before the controller has */
+ /* even been initialized! */
+ if (!ohci_inited)
+ return 0;
+ /* TODO release any interrupts, etc. */
+ /* call hc_release_ohci() here ? */
+ hc_reset (&gohci);
+ return 0;
+}
+
+#endif /* CONFIG_USB_OHCI */
diff --git a/arch/ppc/cpu/ppc4xx/usb_ohci.h b/arch/ppc/cpu/ppc4xx/usb_ohci.h
new file mode 100644
index 0000000..2c3dc4f
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/usb_ohci.h
@@ -0,0 +1,410 @@
+/*
+ * URB OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2001 David Brownell <dbrownell@users.sourceforge.net>
+ *
+ * usb-ohci.h
+ */
+
+static int cc_to_error[16] = {
+
+/* mapping of the OHCI CC status to error codes */
+ /* No Error */ 0,
+ /* CRC Error */ USB_ST_CRC_ERR,
+ /* Bit Stuff */ USB_ST_BIT_ERR,
+ /* Data Togg */ USB_ST_CRC_ERR,
+ /* Stall */ USB_ST_STALLED,
+ /* DevNotResp */ -1,
+ /* PIDCheck */ USB_ST_BIT_ERR,
+ /* UnExpPID */ USB_ST_BIT_ERR,
+ /* DataOver */ USB_ST_BUF_ERR,
+ /* DataUnder */ USB_ST_BUF_ERR,
+ /* reservd */ -1,
+ /* reservd */ -1,
+ /* BufferOver */ USB_ST_BUF_ERR,
+ /* BuffUnder */ USB_ST_BUF_ERR,
+ /* Not Access */ -1,
+ /* Not Access */ -1
+};
+
+/* ED States */
+
+#define ED_NEW 0x00
+#define ED_UNLINK 0x01
+#define ED_OPER 0x02
+#define ED_DEL 0x04
+#define ED_URB_DEL 0x08
+
+/* usb_ohci_ed */
+struct ed {
+ __u32 hwINFO;
+ __u32 hwTailP;
+ __u32 hwHeadP;
+ __u32 hwNextED;
+
+ struct ed *ed_prev;
+ __u8 int_period;
+ __u8 int_branch;
+ __u8 int_load;
+ __u8 int_interval;
+ __u8 state;
+ __u8 type;
+ __u16 last_iso;
+ struct ed *ed_rm_list;
+
+ struct usb_device *usb_dev;
+ __u32 unused[3];
+} __attribute__((aligned(16)));
+typedef struct ed ed_t;
+
+/* TD info field */
+#define TD_CC 0xf0000000
+#define TD_CC_GET(td_p) ((td_p >>28) & 0x0f)
+#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28)
+#define TD_EC 0x0C000000
+#define TD_T 0x03000000
+#define TD_T_DATA0 0x02000000
+#define TD_T_DATA1 0x03000000
+#define TD_T_TOGGLE 0x00000000
+#define TD_R 0x00040000
+#define TD_DI 0x00E00000
+#define TD_DI_SET(X) (((X) & 0x07)<< 21)
+#define TD_DP 0x00180000
+#define TD_DP_SETUP 0x00000000
+#define TD_DP_IN 0x00100000
+#define TD_DP_OUT 0x00080000
+
+#define TD_ISO 0x00010000
+#define TD_DEL 0x00020000
+
+/* CC Codes */
+#define TD_CC_NOERROR 0x00
+#define TD_CC_CRC 0x01
+#define TD_CC_BITSTUFFING 0x02
+#define TD_CC_DATATOGGLEM 0x03
+#define TD_CC_STALL 0x04
+#define TD_DEVNOTRESP 0x05
+#define TD_PIDCHECKFAIL 0x06
+#define TD_UNEXPECTEDPID 0x07
+#define TD_DATAOVERRUN 0x08
+#define TD_DATAUNDERRUN 0x09
+#define TD_BUFFEROVERRUN 0x0C
+#define TD_BUFFERUNDERRUN 0x0D
+#define TD_NOTACCESSED 0x0F
+
+#define MAXPSW 1
+
+struct td {
+ __u32 hwINFO;
+ __u32 hwCBP; /* Current Buffer Pointer */
+ __u32 hwNextTD; /* Next TD Pointer */
+ __u32 hwBE; /* Memory Buffer End Pointer */
+
+ __u16 hwPSW[MAXPSW];
+ __u8 unused;
+ __u8 index;
+ struct ed *ed;
+ struct td *next_dl_td;
+ struct usb_device *usb_dev;
+ int transfer_len;
+ __u32 data;
+
+ __u32 unused2[2];
+} __attribute__((aligned(32)));
+typedef struct td td_t;
+
+#define OHCI_ED_SKIP (1 << 14)
+
+/*
+ * The HCCA (Host Controller Communications Area) is a 256 byte
+ * structure defined in the OHCI spec. that the host controller is
+ * told the base address of. It must be 256-byte aligned.
+ */
+
+#define NUM_INTS 32 /* part of the OHCI standard */
+struct ohci_hcca {
+ __u32 int_table[NUM_INTS]; /* Interrupt ED table */
+#if defined(CONFIG_MPC5200)
+ __u16 pad1; /* set to 0 on each frame_no change */
+ __u16 frame_no; /* current frame number */
+#else
+ __u16 frame_no; /* current frame number */
+ __u16 pad1; /* set to 0 on each frame_no change */
+#endif
+ __u32 done_head; /* info returned for an interrupt */
+ u8 reserved_for_hc[116];
+} __attribute__((aligned(256)));
+
+/*
+ * Maximum number of root hub ports.
+ */
+#define MAX_ROOT_PORTS 15 /* maximum OHCI root hub ports */
+
+/*
+ * This is the structure of the OHCI controller's memory mapped I/O
+ * region. This is Memory Mapped I/O. You must use the readl() and
+ * writel() macros defined in asm/io.h to access these!!
+ */
+struct ohci_regs {
+ /* control and status registers */
+ __u32 revision;
+ __u32 control;
+ __u32 cmdstatus;
+ __u32 intrstatus;
+ __u32 intrenable;
+ __u32 intrdisable;
+ /* memory pointers */
+ __u32 hcca;
+ __u32 ed_periodcurrent;
+ __u32 ed_controlhead;
+ __u32 ed_controlcurrent;
+ __u32 ed_bulkhead;
+ __u32 ed_bulkcurrent;
+ __u32 donehead;
+ /* frame counters */
+ __u32 fminterval;
+ __u32 fmremaining;
+ __u32 fmnumber;
+ __u32 periodicstart;
+ __u32 lsthresh;
+ /* Root hub ports */
+ struct ohci_roothub_regs {
+ __u32 a;
+ __u32 b;
+ __u32 status;
+ __u32 portstatus[MAX_ROOT_PORTS];
+ } roothub;
+} __attribute__((aligned(32)));
+
+/* OHCI CONTROL AND STATUS REGISTER MASKS */
+
+/*
+ * HcControl (control) register masks
+ */
+#define OHCI_CTRL_CBSR (3 << 0) /* control/bulk service ratio */
+#define OHCI_CTRL_PLE (1 << 2) /* periodic list enable */
+#define OHCI_CTRL_IE (1 << 3) /* isochronous enable */
+#define OHCI_CTRL_CLE (1 << 4) /* control list enable */
+#define OHCI_CTRL_BLE (1 << 5) /* bulk list enable */
+#define OHCI_CTRL_HCFS (3 << 6) /* host controller functional state */
+#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
+#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */
+#define OHCI_CTRL_RWE (1 << 10) /* remote wakeup enable */
+
+/* pre-shifted values for HCFS */
+# define OHCI_USB_RESET (0 << 6)
+# define OHCI_USB_RESUME (1 << 6)
+# define OHCI_USB_OPER (2 << 6)
+# define OHCI_USB_SUSPEND (3 << 6)
+
+/*
+ * HcCommandStatus (cmdstatus) register masks
+ */
+#define OHCI_HCR (1 << 0) /* host controller reset */
+#define OHCI_CLF (1 << 1) /* control list filled */
+#define OHCI_BLF (1 << 2) /* bulk list filled */
+#define OHCI_OCR (1 << 3) /* ownership change request */
+#define OHCI_SOC (3 << 16) /* scheduling overrun count */
+
+/*
+ * masks used with interrupt registers:
+ * HcInterruptStatus (intrstatus)
+ * HcInterruptEnable (intrenable)
+ * HcInterruptDisable (intrdisable)
+ */
+#define OHCI_INTR_SO (1 << 0) /* scheduling overrun */
+#define OHCI_INTR_WDH (1 << 1) /* writeback of done_head */
+#define OHCI_INTR_SF (1 << 2) /* start frame */
+#define OHCI_INTR_RD (1 << 3) /* resume detect */
+#define OHCI_INTR_UE (1 << 4) /* unrecoverable error */
+#define OHCI_INTR_FNO (1 << 5) /* frame number overflow */
+#define OHCI_INTR_RHSC (1 << 6) /* root hub status change */
+#define OHCI_INTR_OC (1 << 30) /* ownership change */
+#define OHCI_INTR_MIE (1 << 31) /* master interrupt enable */
+
+/* Virtual Root HUB */
+struct virt_root_hub {
+ int devnum; /* Address of Root Hub endpoint */
+ void *dev; /* was urb */
+ void *int_addr;
+ int send;
+ int interval;
+};
+
+/* USB HUB CONSTANTS (not OHCI-specific; see hub.h) */
+
+/* destination of request */
+#define RH_INTERFACE 0x01
+#define RH_ENDPOINT 0x02
+#define RH_OTHER 0x03
+
+#define RH_CLASS 0x20
+#define RH_VENDOR 0x40
+
+/* Requests: bRequest << 8 | bmRequestType */
+#define RH_GET_STATUS 0x0080
+#define RH_CLEAR_FEATURE 0x0100
+#define RH_SET_FEATURE 0x0300
+#define RH_SET_ADDRESS 0x0500
+#define RH_GET_DESCRIPTOR 0x0680
+#define RH_SET_DESCRIPTOR 0x0700
+#define RH_GET_CONFIGURATION 0x0880
+#define RH_SET_CONFIGURATION 0x0900
+#define RH_GET_STATE 0x0280
+#define RH_GET_INTERFACE 0x0A80
+#define RH_SET_INTERFACE 0x0B00
+#define RH_SYNC_FRAME 0x0C80
+/* Our Vendor Specific Request */
+#define RH_SET_EP 0x2000
+
+/* Hub port features */
+#define RH_PORT_CONNECTION 0x00
+#define RH_PORT_ENABLE 0x01
+#define RH_PORT_SUSPEND 0x02
+#define RH_PORT_OVER_CURRENT 0x03
+#define RH_PORT_RESET 0x04
+#define RH_PORT_POWER 0x08
+#define RH_PORT_LOW_SPEED 0x09
+
+#define RH_C_PORT_CONNECTION 0x10
+#define RH_C_PORT_ENABLE 0x11
+#define RH_C_PORT_SUSPEND 0x12
+#define RH_C_PORT_OVER_CURRENT 0x13
+#define RH_C_PORT_RESET 0x14
+
+/* Hub features */
+#define RH_C_HUB_LOCAL_POWER 0x00
+#define RH_C_HUB_OVER_CURRENT 0x01
+
+#define RH_DEVICE_REMOTE_WAKEUP 0x00
+#define RH_ENDPOINT_STALL 0x01
+
+#define RH_ACK 0x01
+#define RH_REQ_ERR -1
+#define RH_NACK 0x00
+
+/* OHCI ROOT HUB REGISTER MASKS */
+
+/* roothub.portstatus [i] bits */
+#define RH_PS_CCS 0x00000001 /* current connect status */
+#define RH_PS_PES 0x00000002 /* port enable status */
+#define RH_PS_PSS 0x00000004 /* port suspend status */
+#define RH_PS_POCI 0x00000008 /* port over current indicator */
+#define RH_PS_PRS 0x00000010 /* port reset status */
+#define RH_PS_PPS 0x00000100 /* port power status */
+#define RH_PS_LSDA 0x00000200 /* low speed device attached */
+#define RH_PS_CSC 0x00010000 /* connect status change */
+#define RH_PS_PESC 0x00020000 /* port enable status change */
+#define RH_PS_PSSC 0x00040000 /* port suspend status change */
+#define RH_PS_OCIC 0x00080000 /* over current indicator change */
+#define RH_PS_PRSC 0x00100000 /* port reset status change */
+
+/* roothub.status bits */
+#define RH_HS_LPS 0x00000001 /* local power status */
+#define RH_HS_OCI 0x00000002 /* over current indicator */
+#define RH_HS_DRWE 0x00008000 /* device remote wakeup enable */
+#define RH_HS_LPSC 0x00010000 /* local power status change */
+#define RH_HS_OCIC 0x00020000 /* over current indicator change */
+#define RH_HS_CRWE 0x80000000 /* clear remote wakeup enable */
+
+/* roothub.b masks */
+#define RH_B_DR 0x0000ffff /* device removable flags */
+#define RH_B_PPCM 0xffff0000 /* port power control mask */
+
+/* roothub.a masks */
+#define RH_A_NDP (0xff << 0) /* number of downstream ports */
+#define RH_A_PSM (1 << 8) /* power switching mode */
+#define RH_A_NPS (1 << 9) /* no power switching */
+#define RH_A_DT (1 << 10) /* device type (mbz) */
+#define RH_A_OCPM (1 << 11) /* over current protection mode */
+#define RH_A_NOCP (1 << 12) /* no over current protection */
+#define RH_A_POTPGT (0xff << 24) /* power on to power good time */
+
+/* urb */
+#define N_URB_TD 48
+typedef struct {
+ ed_t *ed;
+ __u16 length; /* number of tds associated with this request */
+ __u16 td_cnt; /* number of tds already serviced */
+ int state;
+ unsigned long pipe;
+ int actual_length;
+ td_t *td[N_URB_TD]; /* list pointer to all corresponding TDs associated with this request */
+} urb_priv_t;
+#define URB_DEL 1
+
+/*
+ * This is the full ohci controller description
+ *
+ * Note how the "proper" USB information is just
+ * a subset of what the full implementation needs. (Linus)
+ */
+
+typedef struct ohci {
+ struct ohci_hcca *hcca; /* hcca */
+ /*dma_addr_t hcca_dma; */
+
+ int irq;
+ int disabled; /* e.g. got a UE, we're hung */
+ int sleeping;
+ unsigned long flags; /* for HC bugs */
+
+ struct ohci_regs *regs; /* OHCI controller's memory */
+
+ ed_t *ed_rm_list[2]; /* lists of all endpoints to be removed */
+ ed_t *ed_bulktail; /* last endpoint of bulk list */
+ ed_t *ed_controltail; /* last endpoint of control list */
+ int intrstatus;
+ __u32 hc_control; /* copy of the hc control reg */
+ struct usb_device *dev[32];
+ struct virt_root_hub rh;
+
+ const char *slot_name;
+} ohci_t;
+
+#define NUM_EDS 8 /* num of preallocated endpoint descriptors */
+
+struct ohci_device {
+ ed_t ed[NUM_EDS];
+ int ed_cnt;
+};
+
+/* hcd */
+/* endpoint */
+static int ep_link(ohci_t * ohci, ed_t * ed);
+static int ep_unlink(ohci_t * ohci, ed_t * ed);
+static ed_t *ep_add_ed(struct usb_device *usb_dev, unsigned long pipe);
+
+/*-------------------------------------------------------------------------*/
+
+/* we need more TDs than EDs */
+#define NUM_TD 64
+
+/* +1 so we can align the storage */
+td_t gtd[NUM_TD + 1];
+/* pointers to aligned storage */
+td_t *ptd;
+
+/* TDs ... */
+static inline struct td *td_alloc(struct usb_device *usb_dev)
+{
+ int i;
+ struct td *td;
+
+ td = NULL;
+ for (i = 0; i < NUM_TD; i++) {
+ if (ptd[i].usb_dev == NULL) {
+ td = &ptd[i];
+ td->usb_dev = usb_dev;
+ break;
+ }
+ }
+
+ return td;
+}
+
+static inline void ed_free(struct ed *ed)
+{
+ ed->usb_dev = NULL;
+}
diff --git a/arch/ppc/cpu/ppc4xx/usbdev.c b/arch/ppc/cpu/ppc4xx/usbdev.c
new file mode 100644
index 0000000..fe398af
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/usbdev.c
@@ -0,0 +1,230 @@
+/*USB 1.1,2.0 device*/
+
+#include <common.h>
+#include <asm/processor.h>
+
+#if (defined(CONFIG_440EP) || defined(CONFIG_440EPX)) && defined(CONFIG_CMD_USB)
+
+#include <usb.h>
+#include <asm/ppc4xx-uic.h>
+#include "usbdev.h"
+
+#define USB_DT_DEVICE 0x01
+#define USB_DT_CONFIG 0x02
+#define USB_DT_STRING 0x03
+#define USB_DT_INTERFACE 0x04
+#define USB_DT_ENDPOINT 0x05
+
+int set_value = -1;
+
+void process_endpoints(unsigned short usb2d0_intrin)
+{
+ /*will hold the packet received */
+ struct usb_device_descriptor usb_device_packet;
+ struct usb_configuration_descriptor usb_config_packet;
+ struct usb_string_descriptor usb_string_packet;
+ struct devrequest setup_packet;
+ unsigned int *setup_packet_pt;
+ unsigned char *packet_pt = NULL;
+ int temp, temp1;
+
+ int i;
+
+ /*printf("{USB device} - endpoint 0x%X \n", usb2d0_intrin); */
+
+ /*set usb address, seems to not work unless it is done in the next
+ interrupt, so that is why it is done this way */
+ if (set_value != -1)
+ *(unsigned char *)USB2D0_FADDR_8 = (unsigned char)set_value;
+
+ /*endpoint 1 */
+ if (usb2d0_intrin & 0x01) {
+ setup_packet_pt = (unsigned int *)&setup_packet;
+
+ /*copy packet */
+ setup_packet_pt[0] = *(unsigned int *)USB2D0_FIFO_0;
+ setup_packet_pt[1] = *(unsigned int *)USB2D0_FIFO_0;
+ temp = *(unsigned int *)USB2D0_FIFO_0;
+ temp1 = *(unsigned int *)USB2D0_FIFO_0;
+
+ /*do some swapping */
+ setup_packet.value = swap_16(setup_packet.value);
+ setup_packet.index = swap_16(setup_packet.index);
+ setup_packet.length = swap_16(setup_packet.length);
+
+ /*clear rx packet */
+ *(unsigned short *)USB2D0_INCSR0_8 = 0x48;
+
+ /*printf("0x%X 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X\n", setup_packet.requesttype,
+ setup_packet.request, setup_packet.value,
+ setup_packet.index, setup_packet.length, temp, temp1 ); */
+
+ switch (setup_packet.request) {
+ case USB_REQ_GET_DESCRIPTOR:
+
+ switch (setup_packet.value >> 8) {
+ case USB_DT_DEVICE:
+ /*create packet */
+ usb_device_packet.bLength = 18;
+ usb_device_packet.bDescriptorType =
+ USB_DT_DEVICE;
+#ifdef USB_2_0_DEVICE
+ usb_device_packet.bcdUSB = swap_16(0x200);
+#else
+ usb_device_packet.bcdUSB = swap_16(0x110);
+#endif
+ usb_device_packet.bDeviceClass = 0xff;
+ usb_device_packet.bDeviceSubClass = 0;
+ usb_device_packet.bDeviceProtocol = 0;
+ usb_device_packet.bMaxPacketSize0 = 32;
+ usb_device_packet.idVendor = swap_16(1);
+ usb_device_packet.idProduct = swap_16(2);
+ usb_device_packet.bcdDevice = swap_16(0x300);
+ usb_device_packet.iManufacturer = 1;
+ usb_device_packet.iProduct = 1;
+ usb_device_packet.iSerialNumber = 1;
+ usb_device_packet.bNumConfigurations = 1;
+
+ /*put packet in fifo */
+ packet_pt = (unsigned char *)&usb_device_packet;
+ break;
+
+ case USB_DT_CONFIG:
+ /*create packet */
+ usb_config_packet.bLength = 9;
+ usb_config_packet.bDescriptorType =
+ USB_DT_CONFIG;
+ usb_config_packet.wTotalLength = swap_16(25);
+ usb_config_packet.bNumInterfaces = 1;
+ usb_config_packet.bConfigurationValue = 1;
+ usb_config_packet.iConfiguration = 0;
+ usb_config_packet.bmAttributes = 0x40;
+ usb_config_packet.bMaxPower = 0;
+
+ /*put packet in fifo */
+ packet_pt = (unsigned char *)&usb_config_packet;
+ break;
+
+ case USB_DT_STRING:
+ /*create packet */
+ usb_string_packet.bLength = 2;
+ usb_string_packet.bDescriptorType =
+ USB_DT_STRING;
+ usb_string_packet.wData[0] = 0x0094;
+
+ /*put packet in fifo */
+ packet_pt = (unsigned char *)&usb_string_packet;
+ break;
+ }
+
+ /*put packet in fifo */
+ for (i = 0; i < (setup_packet.length); i++) {
+ *(unsigned char *)USB2D0_FIFO_0 = packet_pt[i];
+ }
+
+ /*give tx command */
+ *(unsigned short *)USB2D0_INCSR0_8 = 0x0a;
+
+ break;
+
+ case USB_REQ_SET_ADDRESS:
+
+ /*copy usb address */
+ set_value = setup_packet.value;
+
+ break;
+ }
+
+ }
+}
+
+void process_other(unsigned char usb2d0_intrusb)
+{
+
+ /*check for sof */
+ if (usb2d0_intrusb & 0x08) {
+ /*printf("{USB device} - sof detected\n"); */
+ }
+
+ /*check for reset */
+ if (usb2d0_intrusb & 0x04) {
+ /*printf("{USB device} - reset detected\n"); */
+
+ /*copy usb address of zero, need to do this when usb reset */
+ set_value = 0;
+ }
+
+ if (usb2d0_intrusb & 0x02) {
+ /*printf("{USB device} - resume detected\n"); */
+ }
+
+ if (usb2d0_intrusb & 0x01) {
+ /*printf("{USB device} - suspend detected\n"); */
+ }
+}
+
+int usbInt(void)
+{
+ /*Must read these 2 registers and use values to clear interrupts. If you
+ do not read them then the interrupt will not be cleared. If you do not
+ use the variable the optimizer will not do a read. */
+ volatile unsigned short usb2d0_intrin =
+ *(unsigned short *)USB2D0_INTRIN_16;
+ volatile unsigned char usb2d0_intrusb =
+ *(unsigned char *)USB2D0_INTRUSB_8;
+
+ /*check if there was an endpoint interrupt */
+ if (usb2d0_intrin != 0) {
+ process_endpoints(usb2d0_intrin);
+ }
+
+ /*check for other interrupts */
+ if (usb2d0_intrusb != 0) {
+ process_other(usb2d0_intrusb);
+ }
+
+ return 0;
+}
+
+#if defined(CONFIG_440EPX)
+void usb_dev_init()
+{
+ printf("USB 2.0 Device init\n");
+
+ /*usb dev init */
+ *(unsigned char *)USB2D0_POWER_8 = 0xa1; /* 2.0 */
+
+ /*enable interrupts */
+ *(unsigned char *)USB2D0_INTRUSBE_8 = 0x0f;
+
+ irq_install_handler(VECNUM_USBDEV, (interrupt_handler_t *) usbInt,
+ NULL);
+}
+#else
+void usb_dev_init()
+{
+#ifdef USB_2_0_DEVICE
+ printf("USB 2.0 Device init\n");
+ /*select 2.0 device */
+ mtsdr(SDR0_USB0, 0x0); /* 2.0 */
+
+ /*usb dev init */
+ *(unsigned char *)USB2D0_POWER_8 = 0xa1; /* 2.0 */
+#else
+ printf("USB 1.1 Device init\n");
+ /*select 1.1 device */
+ mtsdr(SDR0_USB0, 0x2); /* 1.1 */
+
+ /*usb dev init */
+ *(unsigned char *)USB2D0_POWER_8 = 0xc0; /* 1.1 */
+#endif
+
+ /*enable interrupts */
+ *(unsigned char *)USB2D0_INTRUSBE_8 = 0x0f;
+
+ irq_install_handler(VECNUM_USBDEV, (interrupt_handler_t *) usbInt,
+ NULL);
+}
+#endif
+
+#endif /* CONFIG_440EP || CONFIG_440EPX */
diff --git a/arch/ppc/cpu/ppc4xx/usbdev.h b/arch/ppc/cpu/ppc4xx/usbdev.h
new file mode 100644
index 0000000..ef6a2da
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/usbdev.h
@@ -0,0 +1,31 @@
+#include <config.h>
+
+/*Common Registers*/
+#define USB2D0_INTRIN_16 (CONFIG_SYS_USB_DEVICE | 0x100)
+#define USB2D0_POWER_8 (CONFIG_SYS_USB_DEVICE | 0x102)
+#define USB2D0_FADDR_8 (CONFIG_SYS_USB_DEVICE | 0x103)
+#define USB2D0_INTRINE_16 (CONFIG_SYS_USB_DEVICE | 0x104)
+#define USB2D0_INTROUT_16 (CONFIG_SYS_USB_DEVICE | 0x106)
+#define USB2D0_INTRUSBE_8 (CONFIG_SYS_USB_DEVICE | 0x108)
+#define USB2D0_INTRUSB_8 (CONFIG_SYS_USB_DEVICE | 0x109)
+#define USB2D0_INTROUTE_16 (CONFIG_SYS_USB_DEVICE | 0x10a)
+#define USB2D0_TSTMODE_8 (CONFIG_SYS_USB_DEVICE | 0x10c)
+#define USB2D0_INDEX_8 (CONFIG_SYS_USB_DEVICE | 0x10d)
+#define USB2D0_FRAME_16 (CONFIG_SYS_USB_DEVICE | 0x10e)
+
+/*Indexed Registers*/
+#define USB2D0_INCSR0_8 (CONFIG_SYS_USB_DEVICE | 0x110)
+#define USB2D0_INCSR_16 (CONFIG_SYS_USB_DEVICE | 0x110)
+#define USB2D0_INMAXP_16 (CONFIG_SYS_USB_DEVICE | 0x112)
+#define USB2D0_OUTCSR_16 (CONFIG_SYS_USB_DEVICE | 0x114)
+#define USB2D0_OUTMAXP_16 (CONFIG_SYS_USB_DEVICE | 0x116)
+#define USB2D0_OUTCOUNT0_8 (CONFIG_SYS_USB_DEVICE | 0x11a)
+#define USB2D0_OUTCOUNT_16 (CONFIG_SYS_USB_DEVICE | 0x11a)
+
+/*FIFOs*/
+#define USB2D0_FIFO_0 (CONFIG_SYS_USB_DEVICE | 0x120)
+#define USB2D0_FIFO_1 (CONFIG_SYS_USB_DEVICE | 0x124)
+#define USB2D0_FIFO_2 (CONFIG_SYS_USB_DEVICE | 0x128)
+#define USB2D0_FIFO_3 (CONFIG_SYS_USB_DEVICE | 0x12c)
+
+void usb_dev_init(void);
diff --git a/arch/ppc/cpu/ppc4xx/xilinx_irq.c b/arch/ppc/cpu/ppc4xx/xilinx_irq.c
new file mode 100644
index 0000000..7108777
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/xilinx_irq.c
@@ -0,0 +1,100 @@
+/*
+ * (C) Copyright 2008
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * This work has been supported by: QTechnology http://qtec.com/
+ * Based on interrupts.c Wolfgang Denk-DENX Software Engineering-wd@denx.de
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/interrupt.h>
+#include <ppc4xx.h>
+#include <ppc_asm.tmpl>
+#include <commproc.h>
+#include <asm/io.h>
+#include <asm/xilinx_irq.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void pic_enable(void)
+{
+ debug("Xilinx PIC at 0x%8x\n", intc);
+
+ /*
+ * Disable all external interrupts until they are
+ * explicitly requested.
+ */
+ out_be32((u32 *) IER, 0);
+
+ /* Acknowledge any pending interrupts just in case. */
+ out_be32((u32 *) IAR, 0xffffffff);
+
+ /* Turn on the Master Enable. */
+ out_be32((u32 *) MER, 0x3UL);
+
+ return;
+}
+
+int xilinx_pic_irq_get(void)
+{
+ u32 irq;
+ irq = in_be32((u32 *) IVR);
+
+ /* If no interrupt is pending then all bits of the IVR are set to 1. As
+ * the IVR is as many bits wide as numbers of inputs are available.
+ * Therefore, if all bits of the IVR are set to one, its content will
+ * be bigger than XPAR_INTC_MAX_NUM_INTR_INPUTS.
+ */
+ if (irq >= XPAR_INTC_MAX_NUM_INTR_INPUTS)
+ irq = -1; /* report no pending interrupt. */
+
+ debug("get_irq: %d\n", irq);
+ return (irq);
+}
+
+void pic_irq_enable(unsigned int irq)
+{
+ u32 mask = IRQ_MASK(irq);
+ debug("enable: %d\n", irq);
+ out_be32((u32 *) SIE, mask);
+}
+
+void pic_irq_disable(unsigned int irq)
+{
+ u32 mask = IRQ_MASK(irq);
+ debug("disable: %d\n", irq);
+ out_be32((u32 *) CIE, mask);
+}
+
+void pic_irq_ack(unsigned int irq)
+{
+ u32 mask = IRQ_MASK(irq);
+ debug("ack: %d\n", irq);
+ out_be32((u32 *) IAR, mask);
+}
+
+void external_interrupt(struct pt_regs *regs)
+{
+ int irq;
+
+ irq = xilinx_pic_irq_get();
+ if (irq < 0)
+ return;
+
+ interrupt_run_handler(irq);
+
+ return;
+}