summaryrefslogtreecommitdiff
path: root/arch/x86
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86')
-rw-r--r--arch/x86/cpu/broadwell/Makefile1
-rw-r--r--arch/x86/cpu/broadwell/sata.c269
2 files changed, 270 insertions, 0 deletions
diff --git a/arch/x86/cpu/broadwell/Makefile b/arch/x86/cpu/broadwell/Makefile
index db60e30..d422a1c 100644
--- a/arch/x86/cpu/broadwell/Makefile
+++ b/arch/x86/cpu/broadwell/Makefile
@@ -8,3 +8,4 @@ obj-y += cpu.o
obj-y += iobp.o
obj-y += pch.o
obj-y += pinctrl_broadwell.o
+obj-y += sata.o
diff --git a/arch/x86/cpu/broadwell/sata.c b/arch/x86/cpu/broadwell/sata.c
new file mode 100644
index 0000000..dfb8486
--- /dev/null
+++ b/arch/x86/cpu/broadwell/sata.c
@@ -0,0 +1,269 @@
+/*
+ * Copyright (c) 2016 Google, Inc
+ *
+ * From coreboot src/soc/intel/broadwell/sata.c
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/intel_regs.h>
+#include <asm/lpc_common.h>
+#include <asm/pch_common.h>
+#include <asm/pch_common.h>
+#include <asm/arch/pch.h>
+
+struct sata_platdata {
+ int port_map;
+ uint port0_gen3_tx;
+ uint port1_gen3_tx;
+ uint port0_gen3_dtle;
+ uint port1_gen3_dtle;
+
+ /*
+ * SATA DEVSLP Mux
+ * 0 = port 0 DEVSLP on DEVSLP0/GPIO33
+ * 1 = port 3 DEVSLP on DEVSLP0/GPIO33
+ */
+ int devslp_mux;
+
+ /*
+ * DEVSLP Disable
+ * 0: DEVSLP is enabled
+ * 1: DEVSLP is disabled
+ */
+ int devslp_disable;
+};
+
+static void broadwell_sata_init(struct udevice *dev)
+{
+ struct sata_platdata *plat = dev_get_platdata(dev);
+ u32 reg32;
+ u8 *abar;
+ u16 reg16;
+ int port;
+
+ debug("SATA: Initializing controller in AHCI mode.\n");
+
+ /* Set timings */
+ dm_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE);
+ dm_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE);
+
+ /* for AHCI, Port Enable is managed in memory mapped space */
+ dm_pci_read_config16(dev, 0x92, &reg16);
+ reg16 &= ~0xf;
+ reg16 |= 0x8000 | plat->port_map;
+ dm_pci_write_config16(dev, 0x92, reg16);
+ udelay(2);
+
+ /* Setup register 98h */
+ dm_pci_read_config32(dev, 0x98, &reg32);
+ reg32 &= ~((1 << 31) | (1 << 30));
+ reg32 |= 1 << 23;
+ reg32 |= 1 << 24; /* Enable MPHY Dynamic Power Gating */
+ dm_pci_write_config32(dev, 0x98, reg32);
+
+ /* Setup register 9Ch */
+ reg16 = 0; /* Disable alternate ID */
+ reg16 = 1 << 5; /* BWG step 12 */
+ dm_pci_write_config16(dev, 0x9c, reg16);
+
+ /* SATA Initialization register */
+ reg32 = 0x183;
+ reg32 |= (plat->port_map ^ 0xf) << 24;
+ reg32 |= (plat->devslp_mux & 1) << 15;
+ dm_pci_write_config32(dev, 0x94, reg32);
+
+ /* Initialize AHCI memory-mapped space */
+ dm_pci_read_config32(dev, PCI_BASE_ADDRESS_5, &reg32);
+ abar = (u8 *)reg32;
+ debug("ABAR: %p\n", abar);
+
+ /* CAP (HBA Capabilities) : enable power management */
+ clrsetbits_le32(abar + 0x00, 0x00020060 /* SXS+EMS+PMS */,
+ 0x0c006000 /* PSC+SSC+SALP+SSS */ |
+ 1 << 18); /* SAM: SATA AHCI MODE ONLY */
+
+ /* PI (Ports implemented) */
+ writel(plat->port_map, abar + 0x0c);
+ (void) readl(abar + 0x0c); /* Read back 1 */
+ (void) readl(abar + 0x0c); /* Read back 2 */
+
+ /* CAP2 (HBA Capabilities Extended)*/
+ if (plat->devslp_disable) {
+ clrbits_le32(abar + 0x24, 1 << 3);
+ } else {
+ /* Enable DEVSLP */
+ setbits_le32(abar + 0x24, 1 << 5 | 1 << 4 | 1 << 3 | 1 << 2);
+
+ for (port = 0; port < 4; port++) {
+ if (!(plat->port_map & (1 << port)))
+ continue;
+ /* DEVSLP DSP */
+ setbits_le32(abar + 0x144 + (0x80 * port), 1 << 1);
+ }
+ }
+
+ /* Static Power Gating for unused ports */
+ reg32 = readl(RCB_REG(0x3a84));
+ /* Port 3 and 2 disabled */
+ if ((plat->port_map & ((1 << 3)|(1 << 2))) == 0)
+ reg32 |= (1 << 24) | (1 << 26);
+ /* Port 1 and 0 disabled */
+ if ((plat->port_map & ((1 << 1)|(1 << 0))) == 0)
+ reg32 |= (1 << 20) | (1 << 18);
+ writel(reg32, RCB_REG(0x3a84));
+
+ /* Set Gen3 Transmitter settings if needed */
+ if (plat->port0_gen3_tx)
+ pch_iobp_update(SATA_IOBP_SP0_SECRT88,
+ ~(SATA_SECRT88_VADJ_MASK <<
+ SATA_SECRT88_VADJ_SHIFT),
+ (plat->port0_gen3_tx &
+ SATA_SECRT88_VADJ_MASK)
+ << SATA_SECRT88_VADJ_SHIFT);
+
+ if (plat->port1_gen3_tx)
+ pch_iobp_update(SATA_IOBP_SP1_SECRT88,
+ ~(SATA_SECRT88_VADJ_MASK <<
+ SATA_SECRT88_VADJ_SHIFT),
+ (plat->port1_gen3_tx &
+ SATA_SECRT88_VADJ_MASK)
+ << SATA_SECRT88_VADJ_SHIFT);
+
+ /* Set Gen3 DTLE DATA / EDGE registers if needed */
+ if (plat->port0_gen3_dtle) {
+ pch_iobp_update(SATA_IOBP_SP0DTLE_DATA,
+ ~(SATA_DTLE_MASK << SATA_DTLE_DATA_SHIFT),
+ (plat->port0_gen3_dtle & SATA_DTLE_MASK)
+ << SATA_DTLE_DATA_SHIFT);
+
+ pch_iobp_update(SATA_IOBP_SP0DTLE_EDGE,
+ ~(SATA_DTLE_MASK << SATA_DTLE_EDGE_SHIFT),
+ (plat->port0_gen3_dtle & SATA_DTLE_MASK)
+ << SATA_DTLE_EDGE_SHIFT);
+ }
+
+ if (plat->port1_gen3_dtle) {
+ pch_iobp_update(SATA_IOBP_SP1DTLE_DATA,
+ ~(SATA_DTLE_MASK << SATA_DTLE_DATA_SHIFT),
+ (plat->port1_gen3_dtle & SATA_DTLE_MASK)
+ << SATA_DTLE_DATA_SHIFT);
+
+ pch_iobp_update(SATA_IOBP_SP1DTLE_EDGE,
+ ~(SATA_DTLE_MASK << SATA_DTLE_EDGE_SHIFT),
+ (plat->port1_gen3_dtle & SATA_DTLE_MASK)
+ << SATA_DTLE_EDGE_SHIFT);
+ }
+
+ /*
+ * Additional Programming Requirements for Power Optimizer
+ */
+
+ /* Step 1 */
+ pch_common_sir_write(dev, 0x64, 0x883c9003);
+
+ /* Step 2: SIR 68h[15:0] = 880Ah */
+ reg32 = pch_common_sir_read(dev, 0x68);
+ reg32 &= 0xffff0000;
+ reg32 |= 0x880a;
+ pch_common_sir_write(dev, 0x68, reg32);
+
+ /* Step 3: SIR 60h[3] = 1 */
+ reg32 = pch_common_sir_read(dev, 0x60);
+ reg32 |= (1 << 3);
+ pch_common_sir_write(dev, 0x60, reg32);
+
+ /* Step 4: SIR 60h[0] = 1 */
+ reg32 = pch_common_sir_read(dev, 0x60);
+ reg32 |= (1 << 0);
+ pch_common_sir_write(dev, 0x60, reg32);
+
+ /* Step 5: SIR 60h[1] = 1 */
+ reg32 = pch_common_sir_read(dev, 0x60);
+ reg32 |= (1 << 1);
+ pch_common_sir_write(dev, 0x60, reg32);
+
+ /* Clock Gating */
+ pch_common_sir_write(dev, 0x70, 0x3f00bf1f);
+ pch_common_sir_write(dev, 0x54, 0xcf000f0f);
+ pch_common_sir_write(dev, 0x58, 0x00190000);
+ clrsetbits_le32(RCB_REG(0x333c), 0x00300000, 0x00c00000);
+
+ dm_pci_read_config32(dev, 0x300, &reg32);
+ reg32 |= 1 << 17 | 1 << 16 | 1 << 19;
+ reg32 |= 1 << 31 | 1 << 30 | 1 << 29;
+ dm_pci_write_config32(dev, 0x300, reg32);
+
+ dm_pci_read_config32(dev, 0x98, &reg32);
+ reg32 |= 1 << 29;
+ dm_pci_write_config32(dev, 0x98, reg32);
+
+ /* Register Lock */
+ dm_pci_read_config32(dev, 0x9c, &reg32);
+ reg32 |= 1 << 31;
+ dm_pci_write_config32(dev, 0x9c, reg32);
+}
+
+static int broadwell_sata_enable(struct udevice *dev)
+{
+ struct sata_platdata *plat = dev_get_platdata(dev);
+ struct gpio_desc desc;
+ u16 map;
+ int ret;
+
+ /*
+ * Set SATA controller mode early so the resource allocator can
+ * properly assign IO/Memory resources for the controller.
+ */
+ map = 0x0060;
+
+ map |= (plat->port_map ^ 0x3f) << 8;
+ dm_pci_write_config16(dev, 0x90, map);
+
+ ret = gpio_request_by_name(dev, "reset-gpio", 0, &desc, GPIOD_IS_OUT);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int broadwell_sata_ofdata_to_platdata(struct udevice *dev)
+{
+ struct sata_platdata *plat = dev_get_platdata(dev);
+ const void *blob = gd->fdt_blob;
+ int node = dev->of_offset;
+
+ plat->port_map = fdtdec_get_int(blob, node, "intel,sata-port-map", 0);
+ plat->port0_gen3_tx = fdtdec_get_int(blob, node,
+ "intel,sata-port0-gen3-tx", 0);
+
+ return 0;
+}
+
+static int broadwell_sata_probe(struct udevice *dev)
+{
+ if (!(gd->flags & GD_FLG_RELOC))
+ return broadwell_sata_enable(dev);
+ else
+ broadwell_sata_init(dev);
+
+ return 0;
+}
+
+static const struct udevice_id broadwell_ahci_ids[] = {
+ { .compatible = "intel,wildcatpoint-ahci" },
+ { }
+};
+
+U_BOOT_DRIVER(ahci_broadwell_drv) = {
+ .name = "ahci_broadwell",
+ .id = UCLASS_DISK,
+ .of_match = broadwell_ahci_ids,
+ .ofdata_to_platdata = broadwell_sata_ofdata_to_platdata,
+ .probe = broadwell_sata_probe,
+ .platdata_auto_alloc_size = sizeof(struct sata_platdata),
+};