diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/dts/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/dts/armada-385-amc.dts | 3 | ||||
-rw-r--r-- | arch/arm/dts/armada-7040-db-nand.dts | 223 | ||||
-rw-r--r-- | arch/arm/dts/armada-7040-db.dts | 3 | ||||
-rw-r--r-- | arch/arm/dts/armada-8040-db.dts | 222 | ||||
-rw-r--r-- | arch/arm/dts/armada-8040-mcbin.dts | 14 | ||||
-rw-r--r-- | arch/arm/dts/armada-cp110-master.dtsi | 18 | ||||
-rw-r--r-- | arch/arm/dts/armada-cp110-slave.dtsi | 2 | ||||
-rw-r--r-- | arch/arm/mach-mvebu/arm64-common.c | 6 | ||||
-rw-r--r-- | arch/arm/mach-mvebu/armada8k/cpu.c | 18 | ||||
-rw-r--r-- | arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec-38x.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c | 4 | ||||
-rw-r--r-- | arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c | 6 | ||||
-rw-r--r-- | arch/arm/mach-mvebu/serdes/axp/high_speed_env_spec.c | 1 |
14 files changed, 397 insertions, 126 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 4d656ce..4528a8f 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -81,6 +81,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += \ armada-388-gp.dtb \ armada-385-amc.dtb \ armada-7040-db.dtb \ + armada-7040-db-nand.dtb \ armada-8040-db.dtb \ armada-8040-mcbin.dtb \ armada-xp-gp.dtb \ diff --git a/arch/arm/dts/armada-385-amc.dts b/arch/arm/dts/armada-385-amc.dts index a5a8a7f..4649c91 100644 --- a/arch/arm/dts/armada-385-amc.dts +++ b/arch/arm/dts/armada-385-amc.dts @@ -54,6 +54,7 @@ aliases { ethernet0 = ð0; ethernet1 = ð1; + i2c0 = &i2c0; spi1 = &spi1; }; @@ -68,6 +69,8 @@ internal-regs { i2c@11000 { + clock-frequency = <100000>; + u-boot,i2c-slave-addr = <0x0>; pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; status = "okay"; diff --git a/arch/arm/dts/armada-7040-db-nand.dts b/arch/arm/dts/armada-7040-db-nand.dts new file mode 100644 index 0000000..3a9df21 --- /dev/null +++ b/arch/arm/dts/armada-7040-db-nand.dts @@ -0,0 +1,223 @@ +/* + * Copyright (C) 2017 Marvell Technology Group Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * Device Tree file for Marvell Armada 7040 Development board platform + * Boot device: NAND, 0xE (SW3) + */ + +#include "armada-7040.dtsi" + +/ { + model = "Marvell Armada 7040 DB board with NAND"; + compatible = "marvell,armada7040-db-nand", "marvell,armada7040-db", + "marvell,armada7040", "marvell,armada-ap806-quad", + "marvell,armada-ap806"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + i2c0 = &cpm_i2c0; + spi0 = &cpm_spi1; + }; + + memory@00000000 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&ap_pinctl { + /* MPP Bus: + * SDIO [0-5] + * UART0 [11,19] + */ + /* 0 1 2 3 4 5 6 7 8 9 */ + pin-func = < 0x1 0x1 0x1 0x1 0x1 0x1 0x0 0x0 0x0 0x0 + 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x3 >; +}; + +&uart0 { + status = "okay"; +}; + + +&cpm_pcie2 { + status = "okay"; +}; + +&cpm_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&cpm_i2c0_pins>; + status = "okay"; + clock-frequency = <100000>; +}; + +&cpm_pinctl { + /* MPP Bus: + * AUDIO [0-5] + * GBE [6-11] + * SS_PWDN [12] + * NF_RBn [13] + * GPIO [14] + * DEV_BUS [15-27] + * SATA1 [28] + * UART0 [29-30] + * MSS_VTT_EN [31] + * SMI [32,34] + * XSMI [35-36] + * I2C [37-38] + * RGMII1 [44-55] + * SD [56-61] + * GPIO [62] + */ + /* 0 1 2 3 4 5 6 7 8 9 */ + pin-func = < 0x2 0x2 0x2 0x2 0x2 0x2 0x3 0x3 0x3 0x3 + 0x3 0x3 0x0 0x2 0x0 0x1 0x1 0x1 0x1 0x1 + 0x1 0x1 0x1 0x1 0x1 0x1 0x1 0x1 0x9 0xa + 0xa 0x0 0x7 0x0 0x7 0x7 0x7 0x2 0x2 0x0 + 0x0 0x0 0x0 0x0 0x1 0x1 0x1 0x1 0x1 0x1 + 0x1 0x1 0x1 0x1 0x1 0x1 0xe 0xe 0xe 0xe + 0xe 0xe 0x0>; +}; + +&cpm_spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&cpm_spi0_pins>; + status = "disabled"; + + spi-flash@0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <20000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0x200000>; + }; + + partition@400000 { + label = "Filesystem"; + reg = <0x200000 0xe00000>; + }; + }; + }; +}; + +&cpm_sata0 { + status = "okay"; +}; + +&cpm_usb3_0 { + status = "okay"; +}; + +&cpm_usb3_1 { + status = "okay"; +}; + +&cpm_comphy { + phy0 { + phy-type = <PHY_TYPE_SGMII2>; + phy-speed = <PHY_SPEED_3_125G>; + }; + + phy1 { + phy-type = <PHY_TYPE_USB3_HOST0>; + phy-speed = <PHY_SPEED_5G>; + }; + + phy2 { + phy-type = <PHY_TYPE_SGMII0>; + phy-speed = <PHY_SPEED_1_25G>; + }; + + phy3 { + phy-type = <PHY_TYPE_SATA1>; + phy-speed = <PHY_SPEED_5G>; + }; + + phy4 { + phy-type = <PHY_TYPE_USB3_HOST1>; + phy-speed = <PHY_SPEED_5G>; + }; + + phy5 { + phy-type = <PHY_TYPE_PEX2>; + phy-speed = <PHY_SPEED_5G>; + }; +}; + +&cpm_nand { + status = "okay"; +}; + +&cpm_utmi0 { + status = "okay"; +}; + +&cpm_utmi1 { + status = "okay"; +}; + +&ap_sdhci0 { + status = "okay"; + bus-width = <4>; + no-1-8-v; + non-removable; +}; + +&cpm_sdhci0 { + status = "okay"; + bus-width = <4>; + no-1-8-v; + non-removable; +}; diff --git a/arch/arm/dts/armada-7040-db.dts b/arch/arm/dts/armada-7040-db.dts index 84e0dbd..b140b34 100644 --- a/arch/arm/dts/armada-7040-db.dts +++ b/arch/arm/dts/armada-7040-db.dts @@ -42,6 +42,7 @@ /* * Device Tree file for Marvell Armada 7040 Development board platform + * Boot device: SPI NOR, 0x32 (SW3) */ #include "armada-7040.dtsi" @@ -158,7 +159,7 @@ &cpm_comphy { phy0 { - phy-type = <PHY_TYPE_SGMII2>; + phy-type = <PHY_TYPE_SGMII1>; phy-speed = <PHY_SPEED_1_25G>; }; diff --git a/arch/arm/dts/armada-8040-db.dts b/arch/arm/dts/armada-8040-db.dts index f1f196f..fa58995 100644 --- a/arch/arm/dts/armada-8040-db.dts +++ b/arch/arm/dts/armada-8040-db.dts @@ -83,28 +83,68 @@ &cpm_pinctl { /* MPP Bus: - * [0-31] = 0xff: Keep default CP0_shared_pins: - * [11] CLKOUT_MPP_11 (out) - * [23] LINK_RD_IN_CP2CP (in) - * [25] CLKOUT_MPP_25 (out) - * [29] AVS_FB_IN_CP2CP (in) - * [32,34] SMI - * [31] GPIO: push button/Wake - * [35-36] GPIO - * [37-38] I2C - * [40-41] SATA[0/1]_PRESENT_ACTIVEn - * [42-43] XSMI - * [44-55] RGMII1 - * [56-62] SD + * [0-31] = 0xff: Keep default CP0_shared_pins + * [11] CLKOUT_MPP_11 (out) + * [23] LINK_RD_IN_CP2CP (in) + * [25] CLKOUT_MPP_25 (out) + * [29] AVS_FB_IN_CP2CP (in) + * [32,34] GE_MDIO/MDC + * [33] GPIO: GE_INT#/push button/Wake + * [35] MSS_GPIO[3]: MSS_PWDN + * [36] MSS_GPIO[5]: MSS_VTT_EN + * [37-38] I2C0 + * [39] PTP_CLK + * [40-41] SATA[0/1]_PRESENT_ACTIVEn + * [42-43] XG_MDC/XG_MDIO (XSMI) + * [44-55] RGMII1 + * [56-62] SD */ - /* 0 1 2 3 4 5 6 7 8 9 */ + /* 0 1 2 3 4 5 6 7 8 9 */ pin-func = < 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff - 0xff 0 7 0 7 0 0 2 2 0 - 0 0 8 8 1 1 1 1 1 1 - 1 1 1 1 1 1 0xe 0xe 0xe 0xe - 0xe 0xe 0xe >; + 0xff 0xff 0x7 0x0 0x7 0xa 0xa 0x2 0x2 0x5 + 0x9 0x9 0x8 0x8 0x1 0x1 0x1 0x1 0x1 0x1 + 0x1 0x1 0x1 0x1 0x1 0x1 0xe 0xe 0xe 0xe + 0xe 0xe 0xe>; +}; + +&cpm_comphy { + /* Serdes Configuration: + * Lane 0: PCIe0 (x1) + * Lane 1: SATA0 + * Lane 2: SFI (10G) + * Lane 3: SATA1 + * Lane 4: USB3_HOST1 + * Lane 5: PCIe2 (x1) + */ + phy0 { + phy-type = <PHY_TYPE_PEX0>; + }; + phy1 { + phy-type = <PHY_TYPE_SATA0>; + }; + phy2 { + phy-type = <PHY_TYPE_SFI>; + }; + phy3 { + phy-type = <PHY_TYPE_SATA1>; + }; + phy4 { + phy-type = <PHY_TYPE_USB3_HOST1>; + }; + phy5 { + phy-type = <PHY_TYPE_PEX2>; + }; +}; + +/* CON6 on CP0 expansion */ +&cpm_pcie0 { + status = "okay"; +}; + +&cpm_pcie1 { + status = "disabled"; }; /* CON5 on CP0 expansion */ @@ -134,21 +174,69 @@ status = "okay"; }; +&cpm_utmi0 { + status = "okay"; +}; + +&cpm_utmi1 { + status = "okay"; +}; + &cps_pinctl { /* MPP Bus: - * [0-11] RGMII0 - * [13-16] SPI1 - * [27,31] GE_MDIO/MDC - * [32-62] = 0xff: Keep default CP1_shared_pins: + * [0-11] RGMII0 + * [13-16] SPI1 + * [27,31] GE_MDIO/MDC + * [28] SATA1_PRESENT_ACTIVEn + * [29-30] UART0 + * [32-62] = 0xff: Keep default CP1_shared_pins */ - /* 0 1 2 3 4 5 6 7 8 9 */ + /* 0 1 2 3 4 5 6 7 8 9 */ pin-func = < 0x3 0x3 0x3 0x3 0x3 0x3 0x3 0x3 0x3 0x3 - 0x3 0x3 0xff 0x3 0x3 0x3 0x3 0xff 0xff 0xff - 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x8 0xff 0xff - 0xff 0x8 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff + 0x3 0x3 0x3 0x3 0x3 0x3 0x3 0xff 0xff 0xff + 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x8 0x9 0xa + 0xA 0x8 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff - 0xff 0xff 0xff >; + 0xff 0xff 0xff>; +}; + +&cps_comphy { + /* Serdes Configuration: + * Lane 0: PCIe0 (x1) + * Lane 1: SATA0 + * Lane 2: SFI (10G) + * Lane 3: SATA1 + * Lane 4: PCIe1 (x1) + * Lane 5: PCIe2 (x1) + */ + phy0 { + phy-type = <PHY_TYPE_PEX0>; + }; + phy1 { + phy-type = <PHY_TYPE_SATA0>; + }; + phy2 { + phy-type = <PHY_TYPE_SFI>; + }; + phy3 { + phy-type = <PHY_TYPE_SATA1>; + }; + phy4 { + phy-type = <PHY_TYPE_PEX1>; + }; + phy5 { + phy-type = <PHY_TYPE_PEX2>; + }; +}; + +/* CON6 on CP1 expansion */ +&cps_pcie0 { + status = "okay"; +}; + +&cps_pcie1 { + status = "okay"; }; /* CON5 on CP1 expansion */ @@ -200,86 +288,6 @@ status = "okay"; }; -&cpm_comphy { - /* - * Serdes Configuration: - * Lane 0: SGMII2 - * Lane 1: USB3_HOST0 - * Lane 2: KR (10G) - * Lane 3: SATA1 - * Lane 4: USB3_HOST1 - * Lane 5: PEX2x1 - */ - phy0 { - phy-type = <PHY_TYPE_SGMII2>; - phy-speed = <PHY_SPEED_3_125G>; - }; - - phy1 { - phy-type = <PHY_TYPE_USB3_HOST0>; - }; - - phy2 { - phy-type = <PHY_TYPE_KR>; - }; - - phy3 { - phy-type = <PHY_TYPE_SATA1>; - }; - - phy4 { - phy-type = <PHY_TYPE_USB3_HOST1>; - }; - - phy5 { - phy-type = <PHY_TYPE_PEX2>; - }; -}; - -&cps_comphy { - /* - * Serdes Configuration: - * Lane 0: SGMII2 - * Lane 1: USB3_HOST0 - * Lane 2: KR (10G) - * Lane 3: SATA1 - * Lane 4: Unconnected - * Lane 5: PEX2x1 - */ - phy0 { - phy-type = <PHY_TYPE_SGMII2>; - phy-speed = <PHY_SPEED_3_125G>; - }; - - phy1 { - phy-type = <PHY_TYPE_USB3_HOST0>; - }; - - phy2 { - phy-type = <PHY_TYPE_KR>; - }; - - phy3 { - phy-type = <PHY_TYPE_SATA1>; - }; - - phy4 { - phy-type = <PHY_TYPE_UNCONNECTED>; - }; - - phy5 { - phy-type = <PHY_TYPE_PEX2>; - }; -}; - -&cpm_utmi0 { - status = "okay"; -}; - -&cpm_utmi1 { - status = "okay"; -}; - &cps_utmi0 { status = "okay"; }; diff --git a/arch/arm/dts/armada-8040-mcbin.dts b/arch/arm/dts/armada-8040-mcbin.dts index e42b092..991ddc0 100644 --- a/arch/arm/dts/armada-8040-mcbin.dts +++ b/arch/arm/dts/armada-8040-mcbin.dts @@ -99,7 +99,7 @@ * [54] 2.5G SFP LOS * [55] Micro SD card detect * [56-61] Micro SD - * [62] CP1 KR SFP FAULT + * [62] CP1 SFI SFP FAULT */ /* 0 1 2 3 4 5 6 7 8 9 */ pin-func = < 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff @@ -163,7 +163,7 @@ * Lane 1: PCIe0 (x4) * Lane 2: PCIe0 (x4) * Lane 3: PCIe0 (x4) - * Lane 4: KR (10G) + * Lane 4: SFI (10G) * Lane 5: SATA1 */ phy0 { @@ -179,7 +179,7 @@ phy-type = <PHY_TYPE_PEX0>; }; phy4 { - phy-type = <PHY_TYPE_KR>; + phy-type = <PHY_TYPE_SFI>; }; phy5 { phy-type = <PHY_TYPE_SATA1>; @@ -264,15 +264,15 @@ &cps_comphy { /* * CP1 Serdes Configuration: - * Lane 0: SGMII2 + * Lane 0: SGMII1 * Lane 1: SATA 0 * Lane 2: USB HOST 0 * Lane 3: SATA1 - * Lane 4: KR (10G) + * Lane 4: SFI (10G) * Lane 5: SGMII3 */ phy0 { - phy-type = <PHY_TYPE_SGMII2>; + phy-type = <PHY_TYPE_SGMII1>; phy-speed = <PHY_SPEED_1_25G>; }; phy1 { @@ -285,7 +285,7 @@ phy-type = <PHY_TYPE_SATA1>; }; phy4 { - phy-type = <PHY_TYPE_KR>; + phy-type = <PHY_TYPE_SFI>; }; phy5 { phy-type = <PHY_TYPE_SGMII3>; diff --git a/arch/arm/dts/armada-cp110-master.dtsi b/arch/arm/dts/armada-cp110-master.dtsi index 229046f..8c336f2 100644 --- a/arch/arm/dts/armada-cp110-master.dtsi +++ b/arch/arm/dts/armada-cp110-master.dtsi @@ -253,7 +253,7 @@ reg = <0x580000 0x1000>, /* utmi-unit */ <0x440420 0x4>, /* usb-cfg */ <0x440440 0x4>; /* utmi-cfg */ - utmi-port = <UTMI_PHY_TO_USB_HOST0>; + utmi-port = <UTMI_PHY_TO_USB3_HOST0>; status = "disabled"; }; @@ -262,7 +262,7 @@ reg = <0x581000 0x1000>, /* utmi-unit */ <0x440420 0x4>, /* usb-cfg */ <0x440444 0x4>; /* utmi-cfg */ - utmi-port = <UTMI_PHY_TO_USB_HOST1>; + utmi-port = <UTMI_PHY_TO_USB3_HOST1>; status = "disabled"; }; @@ -273,6 +273,20 @@ dma-coherent; status = "disabled"; }; + + cpm_nand: nand@720000 { + compatible = "marvell,mvebu-pxa3xx-nand"; + reg = <0x720000 0x100>; + #address-cells = <1>; + + clocks = <&cpm_syscon0 1 2>; + nand-enable-arbiter; + num-cs = <1>; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + status = "disabled"; + }; + }; cpm_pcie0: pcie@f2600000 { diff --git a/arch/arm/dts/armada-cp110-slave.dtsi b/arch/arm/dts/armada-cp110-slave.dtsi index 5876391..0cdb3d3 100644 --- a/arch/arm/dts/armada-cp110-slave.dtsi +++ b/arch/arm/dts/armada-cp110-slave.dtsi @@ -254,7 +254,7 @@ reg = <0x580000 0x1000>, /* utmi-unit */ <0x440420 0x4>, /* usb-cfg */ <0x440440 0x4>; /* utmi-cfg */ - utmi-port = <UTMI_PHY_TO_USB_HOST0>; + utmi-port = <UTMI_PHY_TO_USB3_HOST0>; status = "disabled"; }; }; diff --git a/arch/arm/mach-mvebu/arm64-common.c b/arch/arm/mach-mvebu/arm64-common.c index 2ef5726..c2c176e 100644 --- a/arch/arm/mach-mvebu/arm64-common.c +++ b/arch/arm/mach-mvebu/arm64-common.c @@ -8,6 +8,7 @@ #include <dm.h> #include <fdtdec.h> #include <libfdt.h> +#include <pci.h> #include <asm/io.h> #include <asm/system.h> #include <asm/arch/cpu.h> @@ -147,5 +148,10 @@ int arch_early_init_r(void) /* Cause the SATA device to do its early init */ uclass_first_device(UCLASS_AHCI, &dev); +#ifdef CONFIG_DM_PCI + /* Trigger PCIe devices detection */ + pci_init(); +#endif + return 0; } diff --git a/arch/arm/mach-mvebu/armada8k/cpu.c b/arch/arm/mach-mvebu/armada8k/cpu.c index 2325e9a..38e7d33 100644 --- a/arch/arm/mach-mvebu/armada8k/cpu.c +++ b/arch/arm/mach-mvebu/armada8k/cpu.c @@ -110,3 +110,21 @@ void reset_cpu(ulong ignored) reg &= ~(1 << RFU_SW_RESET_OFFSET); writel(reg, RFU_GLOBAL_SW_RST); } + +/* + * TODO - implement this functionality using platform + * clock driver once it gets available + * Return NAND clock in Hz + */ +u32 mvebu_get_nand_clock(void) +{ + unsigned long NAND_FLASH_CLK_CTRL = 0xF2440700UL; + unsigned long NF_CLOCK_SEL_MASK = 0x1; + u32 reg; + + reg = readl(NAND_FLASH_CLK_CTRL); + if (reg & NF_CLOCK_SEL_MASK) + return 400 * 1000000; + else + return 250 * 1000000; +} diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec-38x.c b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec-38x.c index 104e7e8..0dfb945 100644 --- a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec-38x.c +++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec-38x.c @@ -13,8 +13,6 @@ #include "high_speed_env_spec.h" #include "sys_env_lib.h" -#define SERDES_VERION "2.0" - u8 selectors_serdes_rev1_map[LAST_SERDES_TYPE][MAX_SERDES_LANES] = { /* 0 1 2 3 4 5 */ {0x1, 0x1, NA, NA, NA, NA}, /* PEX0 */ diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c index 820219e..883b907 100644 --- a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c +++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c @@ -27,7 +27,7 @@ */ struct cfg_seq serdes_seq_db[SERDES_LAST_SEQ]; -#define SERDES_VERION "2.0" +#define SERDES_VERSION "2.0" #define ENDED_OK "High speed PHY - Ended Successfully\n" #define LINK_WAIT_CNTR 100 @@ -1416,7 +1416,7 @@ int serdes_phy_config(void) DEBUG_INIT_FULL_S("\n### ctrl_high_speed_serdes_phy_config ###\n"); DEBUG_INIT_S("High speed PHY - Version: "); - DEBUG_INIT_S(SERDES_VERION); + DEBUG_INIT_S(SERDES_VERSION); DEBUG_INIT_S("\n"); /* Init serdes sequences DB */ diff --git a/arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c b/arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c index 5925bae..b0e193b 100644 --- a/arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c +++ b/arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c @@ -14,7 +14,7 @@ #include "high_speed_env_spec.h" #include "board_env_spec.h" -#define SERDES_VERION "2.1.5" +#define SERDES_VERSION "2.1.5" #define ENDED_OK "High speed PHY - Ended Successfully\n" static const u8 serdes_cfg[][SERDES_LAST_UNIT] = BIN_SERDES_CFG; @@ -285,12 +285,12 @@ int serdes_phy_config(void) if (reg_read(REG_BOOTROM_ROUTINE_ADDR) & (1 << REG_BOOTROM_ROUTINE_DRAM_INIT_OFFS)) { DEBUG_INIT_S("High speed PHY - Version: "); - DEBUG_INIT_S(SERDES_VERION); + DEBUG_INIT_S(SERDES_VERSION); DEBUG_INIT_S(" - 2nd boot - Skip\n"); return MV_OK; } DEBUG_INIT_S("High speed PHY - Version: "); - DEBUG_INIT_S(SERDES_VERION); + DEBUG_INIT_S(SERDES_VERSION); DEBUG_INIT_S(" (COM-PHY-V20)\n"); /* diff --git a/arch/arm/mach-mvebu/serdes/axp/high_speed_env_spec.c b/arch/arm/mach-mvebu/serdes/axp/high_speed_env_spec.c index 115ec2c..704a59f 100644 --- a/arch/arm/mach-mvebu/serdes/axp/high_speed_env_spec.c +++ b/arch/arm/mach-mvebu/serdes/axp/high_speed_env_spec.c @@ -5,7 +5,6 @@ */ #include <common.h> -#include <i2c.h> #include <spl.h> #include <asm/io.h> #include <asm/arch/cpu.h> |