7 files changed, 0 insertions, 432 deletions
diff --git a/board/bf537-stamp/Kconfig b/board/bf537-stamp/Kconfig
deleted file mode 100644
index 4f86128..0000000
--- a/board/bf537-stamp/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_BF537_STAMP
-
-config SYS_BOARD
-	default "bf537-stamp"
-
-config SYS_CONFIG_NAME
-	default "bf537-stamp"
-
-endif
diff --git a/board/bf537-stamp/MAINTAINERS b/board/bf537-stamp/MAINTAINERS
deleted file mode 100644
index 7d9c133..0000000
--- a/board/bf537-stamp/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-BF537-STAMP BOARD
-M:	Sonic Zhang <sonic.adi@gmail.com>
-S:	Maintained
-F:	board/bf537-stamp/
-F:	include/configs/bf537-stamp.h
-F:	configs/bf537-stamp_defconfig
diff --git a/board/bf537-stamp/Makefile b/board/bf537-stamp/Makefile
deleted file mode 100644
index 4008e3a..0000000
--- a/board/bf537-stamp/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# U-Boot - Makefile
-#
-# Copyright (c) 2005-2007 Analog Device Inc.
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= bf537-stamp.o
-obj-$(CONFIG_BFIN_IDE)   += ide-cf.o
-obj-$(CONFIG_HAS_POST)   += post-memory.o
diff --git a/board/bf537-stamp/bf537-stamp.c b/board/bf537-stamp/bf537-stamp.c
deleted file mode 100644
index 1f90c00..0000000
--- a/board/bf537-stamp/bf537-stamp.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * U-Boot - main board file
- *
- * Copyright (c) 2005-2008 Analog Devices Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <config.h>
-#include <command.h>
-#include <asm/blackfin.h>
-#include <net.h>
-#include <asm/mach-common/bits/bootrom.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkboard(void)
-{
-	printf("Board: ADI BF537 stamp board\n");
-	printf("       Support: http://blackfin.uclinux.org/\n");
-	return 0;
-}
-
-#ifdef CONFIG_BFIN_MAC
-static void board_init_enetaddr(uchar *mac_addr)
-{
-#ifdef CONFIG_MTD_NOR_FLASH
-	/* we cram the MAC in the last flash sector */
-	uchar *board_mac_addr = (uchar *)0x203F0000;
-	if (is_valid_ethaddr(board_mac_addr)) {
-		memcpy(mac_addr, board_mac_addr, 6);
-		eth_setenv_enetaddr("ethaddr", mac_addr);
-	}
-#endif
-}
-
-int board_eth_init(bd_t *bis)
-{
-	return bfin_EMAC_initialize(bis);
-}
-#endif
-
-/* miscellaneous platform dependent initialisations */
-int misc_init_r(void)
-{
-#ifdef CONFIG_BFIN_MAC
-	uchar enetaddr[6];
-	if (!eth_getenv_enetaddr("ethaddr", enetaddr))
-		board_init_enetaddr(enetaddr);
-#endif
-
-#ifdef CONFIG_MTD_NOR_FLASH
-	/* we use the last sector for the MAC address / POST LDR */
-	extern flash_info_t flash_info[];
-	flash_protect(FLAG_PROTECT_SET, 0x203F0000, 0x203FFFFF, &flash_info[0]);
-#endif
-
-#ifdef CONFIG_BFIN_IDE
-	cf_ide_init();
-#endif
-
-	return 0;
-}
diff --git a/board/bf537-stamp/config.mk b/board/bf537-stamp/config.mk
deleted file mode 100644
index ab0fbec..0000000
--- a/board/bf537-stamp/config.mk
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# Copyright (c) 2005-2008 Analog Device Inc.
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-# Set some default LDR flags based on boot mode.
-LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
-LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6
diff --git a/board/bf537-stamp/ide-cf.c b/board/bf537-stamp/ide-cf.c
deleted file mode 100644
index 5a3720d..0000000
--- a/board/bf537-stamp/ide-cf.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * CF IDE addon card code
- *
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * Copyright (c) 2005-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <config.h>
-#include <command.h>
-#include <asm/blackfin.h>
-
-void cf_outb(unsigned char val, volatile unsigned char *addr)
-{
-	*(addr) = val;
-	SSYNC();
-}
-
-unsigned char cf_inb(volatile unsigned char *addr)
-{
-	volatile unsigned char c;
-
-	c = *(addr);
-	SSYNC();
-
-	return c;
-}
-
-void cf_insw(unsigned short *sect_buf, unsigned short *addr, int words)
-{
-	int i;
-
-	for (i = 0; i < words; i++)
-		*(sect_buf + i) = *(addr);
-	SSYNC();
-}
-
-void cf_outsw(unsigned short *addr, unsigned short *sect_buf, int words)
-{
-	int i;
-
-	for (i = 0; i < words; i++)
-		*(addr) = *(sect_buf + i);
-	SSYNC();
-}
-
-void cf_ide_init(void)
-{
-#if defined(CONFIG_BFIN_TRUE_IDE)
-	/* Enable ATASEL when in True IDE mode */
-	printf("Using CF True IDE Mode\n");
-	cf_outb(0, (unsigned char *)CONFIG_CF_ATASEL_ENA);
-	udelay(1000);
-#elif defined(CONFIG_BFIN_CF_IDE)
-	/* Disable ATASEL when we're in Common Memory Mode */
-	printf("Using CF Common Memory Mode\n");
-	cf_outb(0, (unsigned char *)CONFIG_CF_ATASEL_DIS);
-	udelay(1000);
-#elif defined(CONFIG_BFIN_HDD_IDE)
-	printf("Using HDD IDE Mode\n");
-#endif
-	ide_init();
-}
diff --git a/board/bf537-stamp/post-memory.c b/board/bf537-stamp/post-memory.c
deleted file mode 100644
index 2dea92f..0000000
--- a/board/bf537-stamp/post-memory.c
+++ /dev/null
@@ -1,257 +0,0 @@
-#include <common.h>
-#include <asm/io.h>
-
-#include <post.h>
-#include <watchdog.h>
-
-#if CONFIG_POST & CONFIG_SYS_POST_MEMORY
-#define CLKIN 25000000
-#define PATTERN1 0x5A5A5A5A
-#define PATTERN2 0xAAAAAAAA
-
-#define CCLK_NUM	4
-#define SCLK_NUM	3
-
-void post_out_buff(char *buff);
-void post_init_pll(int mult, int div);
-int post_init_sdram(int sclk);
-void post_init_uart(int sclk);
-
-const int pll[CCLK_NUM][SCLK_NUM][2] = {
-	{ {20, 4}, {20, 5}, {20, 10} },	/* CCLK = 500M */
-	{ {16, 4}, {16, 5}, {16, 8} },	/* CCLK = 400M */
-	{ {8, 2}, {8, 4}, {8, 5} },	/* CCLK = 200M */
-	{ {4, 1}, {4, 2}, {4, 4} }	/* CCLK = 100M */
-};
-const char *const log[CCLK_NUM][SCLK_NUM] = {
-	{"CCLK-500MHz SCLK-125MHz:    Writing...\0",
-	 "CCLK-500MHz SCLK-100MHz:    Writing...\0",
-	 "CCLK-500MHz SCLK- 50MHz:    Writing...\0",},
-	{"CCLK-400MHz SCLK-100MHz:    Writing...\0",
-	 "CCLK-400MHz SCLK- 80MHz:    Writing...\0",
-	 "CCLK-400MHz SCLK- 50MHz:    Writing...\0",},
-	{"CCLK-200MHz SCLK-100MHz:    Writing...\0",
-	 "CCLK-200MHz SCLK- 50MHz:    Writing...\0",
-	 "CCLK-200MHz SCLK- 40MHz:    Writing...\0",},
-	{"CCLK-100MHz SCLK-100MHz:    Writing...\0",
-	 "CCLK-100MHz SCLK- 50MHz:    Writing...\0",
-	 "CCLK-100MHz SCLK- 25MHz:    Writing...\0",},
-};
-
-int memory_post_test(int flags)
-{
-	int addr;
-	int m, n;
-	int sclk, sclk_temp;
-	int ret = 1;
-
-	sclk_temp = CLKIN / 1000000;
-	sclk_temp = sclk_temp * CONFIG_VCO_MULT;
-	for (sclk = 0; sclk_temp > 0; sclk++)
-		sclk_temp -= CONFIG_SCLK_DIV;
-	sclk = sclk * 1000000;
-	post_init_uart(sclk);
-	if (post_hotkeys_pressed() == 0)
-		return 0;
-
-	for (m = 0; m < CCLK_NUM; m++) {
-		for (n = 0; n < SCLK_NUM; n++) {
-			/* Calculate the sclk */
-			sclk_temp = CLKIN / 1000000;
-			sclk_temp = sclk_temp * pll[m][n][0];
-			for (sclk = 0; sclk_temp > 0; sclk++)
-				sclk_temp -= pll[m][n][1];
-			sclk = sclk * 1000000;
-
-			post_init_pll(pll[m][n][0], pll[m][n][1]);
-			post_init_sdram(sclk);
-			post_init_uart(sclk);
-			post_out_buff("\n\r\0");
-			post_out_buff(log[m][n]);
-			for (addr = 0x0; addr < CONFIG_SYS_MAX_RAM_SIZE; addr += 4)
-				*(unsigned long *)addr = PATTERN1;
-			post_out_buff("Reading...\0");
-			for (addr = 0x0; addr < CONFIG_SYS_MAX_RAM_SIZE; addr += 4) {
-				if ((*(unsigned long *)addr) != PATTERN1) {
-					post_out_buff("Error\n\r\0");
-					ret = 0;
-				}
-			}
-			post_out_buff("OK\n\r\0");
-		}
-	}
-	if (ret)
-		post_out_buff("memory POST passed\n\r\0");
-	else
-		post_out_buff("memory POST failed\n\r\0");
-
-	post_out_buff("\n\r\n\r\0");
-	return 1;
-}
-
-void post_init_uart(int sclk)
-{
-	int divisor;
-
-	for (divisor = 0; sclk > 0; divisor++)
-		sclk -= 57600 * 16;
-
-	bfin_write_PORTF_FER(0x000F);
-	bfin_write_PORTH_FER(0xFFFF);
-
-	bfin_write_UART_GCTL(0x00);
-	bfin_write_UART_LCR(0x83);
-	SSYNC();
-	bfin_write_UART_DLL(divisor & 0xFF);
-	SSYNC();
-	bfin_write_UART_DLH((divisor >> 8) & 0xFF);
-	SSYNC();
-	bfin_write_UART_LCR(0x03);
-	SSYNC();
-	bfin_write_UART_GCTL(0x01);
-	SSYNC();
-}
-
-void post_out_buff(char *buff)
-{
-
-	int i = 0;
-	for (i = 0; i < 0x80000; i++)
-		;
-	i = 0;
-	while ((buff[i] != '\0') && (i != 100)) {
-		while (!(bfin_read_pUART_LSR() & 0x20)) ;
-		bfin_write_UART_THR(buff[i]);
-		SSYNC();
-		i++;
-	}
-	for (i = 0; i < 0x80000; i++)
-		;
-}
-
-void post_init_pll(int mult, int div)
-{
-
-	bfin_write_SIC_IWR(0x01);
-	bfin_write_PLL_CTL((mult << 9));
-	bfin_write_PLL_DIV(div);
-	asm("CLI R2;");
-	asm("IDLE;");
-	asm("STI R2;");
-	while (!(bfin_read_PLL_STAT() & 0x20)) ;
-}
-
-int post_init_sdram(int sclk)
-{
-	int SDRAM_tRP, SDRAM_tRP_num, SDRAM_tRAS, SDRAM_tRAS_num, SDRAM_tRCD,
-	    SDRAM_tWR;
-	int SDRAM_Tref, SDRAM_NRA, SDRAM_CL, SDRAM_SIZE, SDRAM_WIDTH,
-	    mem_SDGCTL, mem_SDBCTL, mem_SDRRC;
-
-	if ((sclk > 119402985)) {
-		SDRAM_tRP = TRP_2;
-		SDRAM_tRP_num = 2;
-		SDRAM_tRAS = TRAS_7;
-		SDRAM_tRAS_num = 7;
-		SDRAM_tRCD = TRCD_2;
-		SDRAM_tWR = TWR_2;
-	} else if ((sclk > 104477612) && (sclk <= 119402985)) {
-		SDRAM_tRP = TRP_2;
-		SDRAM_tRP_num = 2;
-		SDRAM_tRAS = TRAS_6;
-		SDRAM_tRAS_num = 6;
-		SDRAM_tRCD = TRCD_2;
-		SDRAM_tWR = TWR_2;
-	} else if ((sclk > 89552239) && (sclk <= 104477612)) {
-		SDRAM_tRP = TRP_2;
-		SDRAM_tRP_num = 2;
-		SDRAM_tRAS = TRAS_5;
-		SDRAM_tRAS_num = 5;
-		SDRAM_tRCD = TRCD_2;
-		SDRAM_tWR = TWR_2;
-	} else if ((sclk > 74626866) && (sclk <= 89552239)) {
-		SDRAM_tRP = TRP_2;
-		SDRAM_tRP_num = 2;
-		SDRAM_tRAS = TRAS_4;
-		SDRAM_tRAS_num = 4;
-		SDRAM_tRCD = TRCD_2;
-		SDRAM_tWR = TWR_2;
-	} else if ((sclk > 66666667) && (sclk <= 74626866)) {
-		SDRAM_tRP = TRP_2;
-		SDRAM_tRP_num = 2;
-		SDRAM_tRAS = TRAS_3;
-		SDRAM_tRAS_num = 3;
-		SDRAM_tRCD = TRCD_2;
-		SDRAM_tWR = TWR_2;
-	} else if ((sclk > 59701493) && (sclk <= 66666667)) {
-		SDRAM_tRP = TRP_1;
-		SDRAM_tRP_num = 1;
-		SDRAM_tRAS = TRAS_4;
-		SDRAM_tRAS_num = 4;
-		SDRAM_tRCD = TRCD_1;
-		SDRAM_tWR = TWR_2;
-	} else if ((sclk > 44776119) && (sclk <= 59701493)) {
-		SDRAM_tRP = TRP_1;
-		SDRAM_tRP_num = 1;
-		SDRAM_tRAS = TRAS_3;
-		SDRAM_tRAS_num = 3;
-		SDRAM_tRCD = TRCD_1;
-		SDRAM_tWR = TWR_2;
-	} else if ((sclk > 29850746) && (sclk <= 44776119)) {
-		SDRAM_tRP = TRP_1;
-		SDRAM_tRP_num = 1;
-		SDRAM_tRAS = TRAS_2;
-		SDRAM_tRAS_num = 2;
-		SDRAM_tRCD = TRCD_1;
-		SDRAM_tWR = TWR_2;
-	} else if (sclk <= 29850746) {
-		SDRAM_tRP = TRP_1;
-		SDRAM_tRP_num = 1;
-		SDRAM_tRAS = TRAS_1;
-		SDRAM_tRAS_num = 1;
-		SDRAM_tRCD = TRCD_1;
-		SDRAM_tWR = TWR_2;
-	} else {
-		SDRAM_tRP = TRP_1;
-		SDRAM_tRP_num = 1;
-		SDRAM_tRAS = TRAS_1;
-		SDRAM_tRAS_num = 1;
-		SDRAM_tRCD = TRCD_1;
-		SDRAM_tWR = TWR_2;
-	}
-	/*SDRAM INFORMATION: */
-	SDRAM_Tref = 64;	/* Refresh period in milliseconds */
-	SDRAM_NRA = 4096;	/* Number of row addresses in SDRAM */
-	SDRAM_CL = CL_3;	/* 2 */
-
-	SDRAM_SIZE = EBSZ_64;
-	SDRAM_WIDTH = EBCAW_10;
-
-	mem_SDBCTL = SDRAM_WIDTH | SDRAM_SIZE | EBE;
-
-	/* Equation from section 17 (p17-46) of BF533 HRM */
-	mem_SDRRC =
-	    (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) -
-	    (SDRAM_tRAS_num + SDRAM_tRP_num);
-
-	/* Enable SCLK Out */
-	mem_SDGCTL =
-	    (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR
-	     | PSS);
-
-	SSYNC();
-
-	bfin_write_EBIU_SDGCTL(bfin_write_EBIU_SDGCTL() | 0x1000000);
-	/* Set the SDRAM Refresh Rate control register based on SSCLK value */
-	bfin_write_EBIU_SDRRC(mem_SDRRC);
-
-	/* SDRAM Memory Bank Control Register */
-	bfin_write_EBIU_SDBCTL(mem_SDBCTL);
-
-	/* SDRAM Memory Global Control Register */
-	bfin_write_EBIU_SDGCTL(mem_SDGCTL);
-	SSYNC();
-	return mem_SDRRC;
-}
-
-#endif				/* CONFIG_POST & CONFIG_SYS_POST_MEMORY */