5 files changed, 72 insertions, 18 deletions
diff --git a/board/freescale/mx31pdk/mx31pdk.c b/board/freescale/mx31pdk/mx31pdk.c
index bc60632..895396c 100644
--- a/board/freescale/mx31pdk/mx31pdk.c
+++ b/board/freescale/mx31pdk/mx31pdk.c
@@ -36,13 +36,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#ifdef CONFIG_HW_WATCHDOG
-void hw_watchdog_reset(void)
-{
-	mxc_hw_watchdog_reset();
-}
-#endif
-
 int dram_init(void)
 {
 	/* dram_init must store complete ramsize in gd->ram_size */
@@ -98,7 +91,7 @@ int board_late_init(void)
 	pmic_reg_write(p, REG_POWER_CTL0, val | COINCHEN);
 	pmic_reg_write(p, REG_INT_STATUS1, RTCRSTI);
 #ifdef CONFIG_HW_WATCHDOG
-	mxc_hw_watchdog_enable();
+	hw_watchdog_init();
 #endif
 	return 0;
 }
diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c
index d1ef431..54c16b1 100644
--- a/board/freescale/mx51evk/mx51evk.c
+++ b/board/freescale/mx51evk/mx51evk.c
@@ -489,8 +489,6 @@ int board_init(void)
 	/* address of boot parameters */
 	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
 
-	lcd_enable();
-
 	return 0;
 }
 
diff --git a/board/freescale/mx51evk/mx51evk_video.c b/board/freescale/mx51evk/mx51evk_video.c
index f036cf7..7be5c9b 100644
--- a/board/freescale/mx51evk/mx51evk_video.c
+++ b/board/freescale/mx51evk/mx51evk_video.c
@@ -48,6 +48,22 @@ static struct fb_videomode const claa_wvga = {
 	.vmode		= FB_VMODE_NONINTERLACED
 };
 
+static struct fb_videomode const dvi = {
+	.name		= "DVI panel",
+	.refresh	= 60,
+	.xres		= 1024,
+	.yres		= 768,
+	.pixclock	= 15385,
+	.left_margin	= 220,
+	.right_margin	= 40,
+	.upper_margin	= 21,
+	.lower_margin	= 7,
+	.hsync_len	= 60,
+	.vsync_len	= 10,
+	.sync		= 0,
+	.vmode		= FB_VMODE_NONINTERLACED
+};
+
 void setup_iomux_lcd(void)
 {
 	/* DI2_PIN15 */
@@ -73,9 +89,26 @@ void setup_iomux_lcd(void)
 	gpio_direction_output(MX51EVK_LCD_BACKLIGHT, 1);
 }
 
-void lcd_enable(void)
+int board_video_skip(void)
 {
-	int ret = ipuv3_fb_init(&claa_wvga, 1, IPU_PIX_FMT_RGB565);
+	int ret;
+	char const *e = getenv("panel");
+
+	if (e) {
+		if (strcmp(e, "claa") == 0) {
+			ret = ipuv3_fb_init(&claa_wvga, 1, IPU_PIX_FMT_RGB565);
+			if (ret)
+				printf("claa cannot be configured: %d\n", ret);
+			return ret;
+		}
+	}
+
+	/*
+	 * 'panel' env variable not found or has different value than 'claa'
+	 *  Defaulting to dvi output.
+	 */
+	ret = ipuv3_fb_init(&dvi, 0, IPU_PIX_FMT_RGB24);
 	if (ret)
-		printf("LCD cannot be configured: %d\n", ret);
+		printf("dvi cannot be configured: %d\n", ret);
+	return ret;
 }
diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c
index 60cd4f0..8f39c38 100644
--- a/board/freescale/mx53loco/mx53loco.c
+++ b/board/freescale/mx53loco/mx53loco.c
@@ -503,8 +503,6 @@ int board_init(void)
 	mxc_set_sata_internal_clock();
 	setup_iomux_i2c();
 
-	lcd_enable();
-
 	return 0;
 }
 
diff --git a/board/freescale/mx53loco/mx53loco_video.c b/board/freescale/mx53loco/mx53loco_video.c
index 69991e8..a4d5a6a 100644
--- a/board/freescale/mx53loco/mx53loco_video.c
+++ b/board/freescale/mx53loco/mx53loco_video.c
@@ -46,6 +46,21 @@ static struct fb_videomode const claa_wvga = {
 	.vmode		= FB_VMODE_NONINTERLACED
 };
 
+static struct fb_videomode const seiko_wvga = {
+	.name		= "Seiko-43WVF1G",
+	.refresh	= 60,
+	.xres		= 800,
+	.yres		= 480,
+	.pixclock	= 29851, /* picosecond (33.5 MHz) */
+	.left_margin	= 89,
+	.right_margin	= 164,
+	.upper_margin	= 23,
+	.lower_margin	= 10,
+	.hsync_len	= 10,
+	.vsync_len	= 10,
+	.sync		= 0,
+};
+
 void setup_iomux_lcd(void)
 {
 	mxc_request_iomux(MX53_PIN_DI0_DISP_CLK, IOMUX_CONFIG_ALT0);
@@ -86,9 +101,26 @@ void setup_iomux_lcd(void)
 	gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_GPIO_1), 1);
 }
 
-void lcd_enable(void)
+int board_video_skip(void)
 {
-	int ret = ipuv3_fb_init(&claa_wvga, 0, IPU_PIX_FMT_RGB565);
+	int ret;
+	char const *e = getenv("panel");
+
+	if (e) {
+		if (strcmp(e, "seiko") == 0) {
+			ret = ipuv3_fb_init(&seiko_wvga, 0, IPU_PIX_FMT_RGB24);
+			if (ret)
+				printf("Seiko cannot be configured: %d\n", ret);
+			return ret;
+		}
+	}
+
+	/*
+	 * 'panel' env variable not found or has different value than 'seiko'
+	 *  Defaulting to claa lcd.
+	 */
+	ret = ipuv3_fb_init(&claa_wvga, 0, IPU_PIX_FMT_RGB565);
 	if (ret)
-		printf("LCD cannot be configured: %d\n", ret);
+		printf("CLAA cannot be configured: %d\n", ret);
+	return ret;
 }