4 files changed, 0 insertions, 332 deletions
diff --git a/board/netstal/mcu25/Makefile b/board/netstal/mcu25/Makefile
deleted file mode 100644
index a983de9..0000000
--- a/board/netstal/mcu25/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2007-2008 Netstal Maschinen AG
-# Niklaus Giger (ng@netstal.com)
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS	= $(BOARD).o \
-	../common/fixed_sdram.o \
-	../common/nm_bsp.o
-
-SRCS	:= $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-
-$(LIB):	$(OBJS)
-	$(call cmd_link_o_target, $^)
-
-clean:
-	rm -f $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/netstal/mcu25/README.txt b/board/netstal/mcu25/README.txt
deleted file mode 100644
index d25fddd..0000000
--- a/board/netstal/mcu25/README.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-MCU25 Configuration Details
-
-Memory Bank 0 -- Flash chip
----------------------------
-
-0xfff00000 - 0xffffffff
-
-The flash chip is really only 512Kbytes, but the high address bit of
-the 1Meg region is ignored, so the flash is replicated through the
-region. Thus, this is consistent with a flash base address 0xfff80000.
-
-The placement at the end is to be consistent with reset behavior,
-where the processor itself initially uses this bus to load the branch
-vector and start running.
-
-On-Chip Memory
---------------
-
-0xf4000000 - 0xf4000fff
-
-The 405GPr includes a 4K on-chip memory that can be placed however
-software chooses. I choose to place the memory at this address, to
-keep it out of the cachable areas.
-
-
-Internal Peripherals
---------------------
-
-0xef600300 - 0xef6008ff
-
-These are scattered various peripherals internal to the PPC405GPr
-chip.
-
-Chip-Select 2: Flash Memory
----------------------------
-
-0x70000000
-
-Chip-Select 3: CAN Interface
-----------------------------
-0x7800000
-
-
-Chip-Select 4: IMC-bus standard
--------------------------------
-
-Our IO-Bus (slow version)
-
-
-Chip-Select 5: IMC-bus fast (inactive)
---------------------------------------
-
-Our IO-Bus (fast, but not yet use)
-
-
-Memory Bank 1 -- SDRAM
--------------------------------------
-
-0x00000000 - 0x2ffffff   # Default 64 MB
diff --git a/board/netstal/mcu25/config.mk b/board/netstal/mcu25/config.mk
deleted file mode 100644
index 61dc091..0000000
--- a/board/netstal/mcu25/config.mk
+++ /dev/null
@@ -1,25 +0,0 @@
-#
-# (C) Copyright 2005 Netstal Maschinen AG
-#     Niklaus Giger (ng@netstal.com)
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# Netstal Maschinen AG: MCU25 board
-#
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG -g
-endif
diff --git a/board/netstal/mcu25/mcu25.c b/board/netstal/mcu25/mcu25.c
deleted file mode 100644
index 36fb388..0000000
--- a/board/netstal/mcu25/mcu25.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- *(C) Copyright 2005-2008 Netstal Maschinen AG
- *    Niklaus Giger (Niklaus.Giger@netstal.com)
- *
- *    This source code is free software; you can redistribute it
- *    and/or modify it in source code form under the terms of the GNU
- *    General Public License as published by the Free Software
- *    Foundation; either version 2 of the License, or (at your option)
- *    any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- */
-
-#include  <common.h>
-#include  <asm/ppc4xx.h>
-#include  <asm/processor.h>
-#include  <asm/io.h>
-#include  <asm/u-boot.h>
-#include  "../common/nm.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define MCU25_SLOT_ADDRESS		(0x7A000000 + 0x0A)
-#define MCU25_DIGITAL_IO_REGISTER	(0x7A000000 + 0xc0)
-
-#define MCU25_LED_REGISTER_ADDRESS	(0x7C000000 + 0x10)
-#define MCU25_VERSIONS_REGISTER	(0x7C000000 + 0x0C)
-#define MCU25_IO_CONFIGURATION		(0x7C000000 + 0x0e)
-#define MCU_SW_INSTALL_REQUESTED	0x08
-
-#define SDRAM_LEN	(32 << 20)	/* 32 MB - RAM */
-
-/*
- * This function is run very early, out of flash, and before devices are
- * initialized. It is called by arch/powerpc/lib/board.c:board_init_f by virtue
- * of being in the init_sequence array.
- *
- * The SDRAM has been initialized already -- start.S:start called
- * init.S:init_sdram early on -- but it is not yet being used for
- * anything, not even stack. So be careful.
- */
-
-/* Attention: If you want 1 microsecs times from the external oscillator
- * 0x00004051 is okay for u-boot/linux, but different from old vxworks values
- * 0x00804051 causes problems with u-boot and linux!
- */
-#define CPC0_CR0_VALUE	0x0007F03C
-#define CPC0_CR1_VALUE	0x00004051
-
-int board_early_init_f (void)
-{
-	/* Documented in A-1171
-	 *
-	 * Interrupt controller setup for the MCU25 board.
-	 * Note: IRQ 0-15  405GP internally generated; high; level sensitive
-	 *       IRQ 16    405GP internally generated; low; level sensitive
-	 *      IRQ 17-24 RESERVED/UNUSED
-	 *      IRQ 31 (EXT IRQ 6) (unused)
-	 */
-	mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
-	mtdcr(UIC0ER, 0x00000000); /* disable all ints */
-	mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical */
-	mtdcr(UIC0PR, 0xFFFFE000); /* set int polarities */
-	mtdcr(UIC0TR, 0x00000000); /* set int trigger levels */
-	mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
-
-	mtdcr(CPC0_CR1, CPC0_CR1_VALUE);
-	mtdcr(CPC0_ECR, 0x60606000);
-	mtdcr(CPC0_EIRR, 0x7C000000);
-	out32(GPIO0_OR,		CONFIG_SYS_GPIO0_OR );
-	out32(GPIO0_TCR,	CONFIG_SYS_GPIO0_TCR);
-	out32(GPIO0_ODR,	CONFIG_SYS_GPIO0_ODR);
-	mtspr(SPRN_CCR0,      0x00700000);
-
-	return 0;
-}
-
-#ifdef CONFIG_BOARD_PRE_INIT
-int board_pre_init (void)
-{
-	return board_early_init_f ();
-}
-#endif
-
-int sys_install_requested(void)
-{
-	u16 ioValue = in_be16((u16 *)MCU25_DIGITAL_IO_REGISTER);
-	return (ioValue & MCU_SW_INSTALL_REQUESTED) != 0;
-}
-
-int checkboard (void)
-{
-	u16 boardVersReg = in_be16((u16 *)MCU25_VERSIONS_REGISTER);
-	u16 hwConfig   = in_be16((u16 *)MCU25_IO_CONFIGURATION);
-	u16 generation = boardVersReg & 0x0f;
-	u16 index      = boardVersReg & 0xf0;
-
-	/* Cannot be done in board_early_init */
-	mtdcr(CPC0_CR0,  CPC0_CR0_VALUE);
-
-	/* Force /RTS to active. The board it not wired quite
-	 * correctly to use cts/rtc flow control, so just force the
-	 * /RST active and forget about it.
-	 */
-	writeb (readb (0xef600404) | 0x03, 0xef600404);
-	nm_show_print(generation, index, hwConfig);
-	return 0;
-}
-
-u32 hcu_led_get(void)
-{
-	return in_be16((u16 *)MCU25_LED_REGISTER_ADDRESS) & 0x3ff;
-}
-
-/*
- * hcu_led_set  value to be placed into the LEDs (max 6 bit)
- */
-void hcu_led_set(u32 value)
-{
-   out_be16((u16 *)MCU25_LED_REGISTER_ADDRESS, value);
-}
-
-/*
- * hcu_get_slot
- */
-u32 hcu_get_slot(void)
-{
-	u16 slot = in_be16((u16 *)MCU25_SLOT_ADDRESS);
-	return slot & 0x7f;
-}
-
-/*
- * get_serial_number
- */
-u32 get_serial_number(void)
-{
-	u32 serial = in_be32((u32 *)CONFIG_SYS_FLASH_BASE);
-
-	if (serial == 0xffffffff)
-		return 0;
-
-	return serial;
-}
-
-
-/*
- * misc_init_r.
- */
-
-int misc_init_r(void)
-{
-	common_misc_init_r();
-	set_params_for_sw_install( sys_install_requested(), "mcu25" );
-	return 0;
-}
-
-phys_size_t initdram(int board_type)
-{
-	unsigned int dram_size = 64*1024*1024;
-	init_ppc405_sdram(dram_size);
-
-#ifdef DEBUG
-	show_sdram_registers();
-#endif
-
-	return dram_size;
-}
-
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
-{
-	ft_cpu_setup(blob, bd);
-
-}
-#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
-
-/*
- * Hardcoded flash setup:
- * Flash 0 is a non-CFI AMD AM29F040 flash, 8 bit flash / 8 bit bus.
- */
-ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info)
-{
-	if (banknum == 0) {	/* non-CFI boot flash */
-		info->portwidth = 1;
-		info->chipwidth = 1;
-		info->interface = FLASH_CFI_X8;
-		return 1;
-	} else
-		return 0;
-}