summaryrefslogtreecommitdiff
path: root/doc/README.xpedite1k
diff options
context:
space:
mode:
Diffstat (limited to 'doc/README.xpedite1k')
-rw-r--r--doc/README.xpedite1k6
1 files changed, 3 insertions, 3 deletions
diff --git a/doc/README.xpedite1k b/doc/README.xpedite1k
index 34bba13..1da8b80 100644
--- a/doc/README.xpedite1k
+++ b/doc/README.xpedite1k
@@ -23,7 +23,7 @@ strappings and the 2 EMAC HW Ethernet addresses. Be careful not to
change the 1st page of the EEPROM! Unpopulated jumper J560 can get you
out of trouble as it disables the strapping read from EEPROM.
-I2C iprobe
+I2C probe
=====================
The i2c utilities work and have been tested on Rev B. of the 440GX. See
@@ -47,10 +47,10 @@ J560 - closed
This will select the default sys0 and sys1 settings (the serial
eeproms are not used). Then power up the board and fix the serial
-eeprom using the imm command. Here are the values I currently
+eeprom using the 'i2c mm' command. Here are the values I currently
use:
-=> imd 50 0 10
+=> i2c md 50 0 10
0000: 85 7d 42 06 07 80 11 00 00 00 00 00 00 00 00 00 .}B.............