summaryrefslogtreecommitdiff
path: root/drivers/usb/musb/blackfin_usb.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/musb/blackfin_usb.c')
-rw-r--r--drivers/usb/musb/blackfin_usb.c143
1 files changed, 143 insertions, 0 deletions
diff --git a/drivers/usb/musb/blackfin_usb.c b/drivers/usb/musb/blackfin_usb.c
new file mode 100644
index 0000000..38aceb2
--- /dev/null
+++ b/drivers/usb/musb/blackfin_usb.c
@@ -0,0 +1,143 @@
+/*
+ * Blackfin MUSB HCD (Host Controller Driver) for u-boot
+ *
+ * Copyright (c) 2008-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+
+#include <usb.h>
+
+#include <asm/blackfin.h>
+#include <asm/mach-common/bits/usb.h>
+
+#include "musb_core.h"
+
+/* MUSB platform configuration */
+struct musb_config musb_cfg = {
+ .regs = (struct musb_regs *)USB_FADDR,
+ .timeout = 0x3FFFFFF,
+ .musb_speed = 0,
+};
+
+/*
+ * This function read or write data to endpoint fifo
+ * Blackfin use DMA polling method to avoid buffer alignment issues
+ *
+ * ep - Endpoint number
+ * length - Number of bytes to write to FIFO
+ * fifo_data - Pointer to data buffer to be read/write
+ * is_write - Flag for read or write
+ */
+void rw_fifo(u8 ep, u32 length, void *fifo_data, int is_write)
+{
+ struct bfin_musb_dma_regs *regs;
+ u32 val = (u32)fifo_data;
+
+ blackfin_dcache_flush_invalidate_range(fifo_data, fifo_data + length);
+
+ regs = (void *)USB_DMA_INTERRUPT;
+ regs += ep;
+
+ /* Setup DMA address register */
+ bfin_write16(&regs->addr_low, val);
+ SSYNC();
+
+ bfin_write16(&regs->addr_high, val >> 16);
+ SSYNC();
+
+ /* Setup DMA count register */
+ bfin_write16(&regs->count_low, length);
+ bfin_write16(&regs->count_high, 0);
+ SSYNC();
+
+ /* Enable the DMA */
+ val = (ep << 4) | DMA_ENA | INT_ENA;
+ if (is_write)
+ val |= DIRECTION;
+ bfin_write16(&regs->control, val);
+ SSYNC();
+
+ /* Wait for compelete */
+ while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << ep)))
+ continue;
+
+ /* acknowledge dma interrupt */
+ bfin_write_USB_DMA_INTERRUPT(1 << ep);
+ SSYNC();
+
+ /* Reset DMA */
+ bfin_write16(&regs->control, 0);
+ SSYNC();
+}
+
+void write_fifo(u8 ep, u32 length, void *fifo_data)
+{
+ rw_fifo(ep, length, fifo_data, 1);
+}
+
+void read_fifo(u8 ep, u32 length, void *fifo_data)
+{
+ rw_fifo(ep, length, fifo_data, 0);
+}
+
+
+/*
+ * CPU and board-specific MUSB initializations. Aliased function
+ * signals caller to move on.
+ */
+static void __def_musb_init(void)
+{
+}
+void board_musb_init(void) __attribute__((weak, alias("__def_musb_init")));
+
+int musb_platform_init(void)
+{
+ /* board specific initialization */
+ board_musb_init();
+
+ if (ANOMALY_05000346) {
+ bfin_write_USB_APHY_CALIB(ANOMALY_05000346_value);
+ SSYNC();
+ }
+
+ if (ANOMALY_05000347) {
+ bfin_write_USB_APHY_CNTRL(0x0);
+ SSYNC();
+ }
+
+ /* Configure PLL oscillator register */
+ bfin_write_USB_PLLOSC_CTRL(0x30a8);
+ SSYNC();
+
+ bfin_write_USB_SRP_CLKDIV((get_sclk()/1000) / 32 - 1);
+ SSYNC();
+
+ bfin_write_USB_EP_NI0_RXMAXP(64);
+ SSYNC();
+
+ bfin_write_USB_EP_NI0_TXMAXP(64);
+ SSYNC();
+
+ /* Route INTRUSB/INTR_RX/INTR_TX to USB_INT0*/
+ bfin_write_USB_GLOBINTR(0x7);
+ SSYNC();
+
+ bfin_write_USB_GLOBAL_CTL(GLOBAL_ENA | EP1_TX_ENA | EP2_TX_ENA |
+ EP3_TX_ENA | EP4_TX_ENA | EP5_TX_ENA |
+ EP6_TX_ENA | EP7_TX_ENA | EP1_RX_ENA |
+ EP2_RX_ENA | EP3_RX_ENA | EP4_RX_ENA |
+ EP5_RX_ENA | EP6_RX_ENA | EP7_RX_ENA);
+ SSYNC();
+
+ return 0;
+}
+
+/*
+ * This function performs Blackfin platform specific deinitialization for usb.
+*/
+void musb_platform_deinit(void)
+{
+}