summaryrefslogtreecommitdiff
path: root/drivers/usb/musb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/musb')
-rw-r--r--drivers/usb/musb/Makefile1
-rw-r--r--drivers/usb/musb/blackfin_usb.c143
-rw-r--r--drivers/usb/musb/blackfin_usb.h99
-rw-r--r--drivers/usb/musb/musb_core.h16
-rw-r--r--drivers/usb/musb/musb_hcd.h4
5 files changed, 262 insertions, 1 deletions
diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
index 12e115e..397f5fe 100644
--- a/drivers/usb/musb/Makefile
+++ b/drivers/usb/musb/Makefile
@@ -27,6 +27,7 @@ LIB := $(obj)libusb_musb.a
COBJS-$(CONFIG_MUSB_HCD) += musb_hcd.o musb_core.o
COBJS-$(CONFIG_MUSB_UDC) += musb_udc.o musb_core.o
+COBJS-$(CONFIG_USB_BLACKFIN) += blackfin_usb.o
COBJS-$(CONFIG_USB_DAVINCI) += davinci.o
COBJS-$(CONFIG_USB_OMAP3) += omap3.o
COBJS-$(CONFIG_USB_DA8XX) += da8xx.o
diff --git a/drivers/usb/musb/blackfin_usb.c b/drivers/usb/musb/blackfin_usb.c
new file mode 100644
index 0000000..38aceb2
--- /dev/null
+++ b/drivers/usb/musb/blackfin_usb.c
@@ -0,0 +1,143 @@
+/*
+ * Blackfin MUSB HCD (Host Controller Driver) for u-boot
+ *
+ * Copyright (c) 2008-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+
+#include <usb.h>
+
+#include <asm/blackfin.h>
+#include <asm/mach-common/bits/usb.h>
+
+#include "musb_core.h"
+
+/* MUSB platform configuration */
+struct musb_config musb_cfg = {
+ .regs = (struct musb_regs *)USB_FADDR,
+ .timeout = 0x3FFFFFF,
+ .musb_speed = 0,
+};
+
+/*
+ * This function read or write data to endpoint fifo
+ * Blackfin use DMA polling method to avoid buffer alignment issues
+ *
+ * ep - Endpoint number
+ * length - Number of bytes to write to FIFO
+ * fifo_data - Pointer to data buffer to be read/write
+ * is_write - Flag for read or write
+ */
+void rw_fifo(u8 ep, u32 length, void *fifo_data, int is_write)
+{
+ struct bfin_musb_dma_regs *regs;
+ u32 val = (u32)fifo_data;
+
+ blackfin_dcache_flush_invalidate_range(fifo_data, fifo_data + length);
+
+ regs = (void *)USB_DMA_INTERRUPT;
+ regs += ep;
+
+ /* Setup DMA address register */
+ bfin_write16(&regs->addr_low, val);
+ SSYNC();
+
+ bfin_write16(&regs->addr_high, val >> 16);
+ SSYNC();
+
+ /* Setup DMA count register */
+ bfin_write16(&regs->count_low, length);
+ bfin_write16(&regs->count_high, 0);
+ SSYNC();
+
+ /* Enable the DMA */
+ val = (ep << 4) | DMA_ENA | INT_ENA;
+ if (is_write)
+ val |= DIRECTION;
+ bfin_write16(&regs->control, val);
+ SSYNC();
+
+ /* Wait for compelete */
+ while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << ep)))
+ continue;
+
+ /* acknowledge dma interrupt */
+ bfin_write_USB_DMA_INTERRUPT(1 << ep);
+ SSYNC();
+
+ /* Reset DMA */
+ bfin_write16(&regs->control, 0);
+ SSYNC();
+}
+
+void write_fifo(u8 ep, u32 length, void *fifo_data)
+{
+ rw_fifo(ep, length, fifo_data, 1);
+}
+
+void read_fifo(u8 ep, u32 length, void *fifo_data)
+{
+ rw_fifo(ep, length, fifo_data, 0);
+}
+
+
+/*
+ * CPU and board-specific MUSB initializations. Aliased function
+ * signals caller to move on.
+ */
+static void __def_musb_init(void)
+{
+}
+void board_musb_init(void) __attribute__((weak, alias("__def_musb_init")));
+
+int musb_platform_init(void)
+{
+ /* board specific initialization */
+ board_musb_init();
+
+ if (ANOMALY_05000346) {
+ bfin_write_USB_APHY_CALIB(ANOMALY_05000346_value);
+ SSYNC();
+ }
+
+ if (ANOMALY_05000347) {
+ bfin_write_USB_APHY_CNTRL(0x0);
+ SSYNC();
+ }
+
+ /* Configure PLL oscillator register */
+ bfin_write_USB_PLLOSC_CTRL(0x30a8);
+ SSYNC();
+
+ bfin_write_USB_SRP_CLKDIV((get_sclk()/1000) / 32 - 1);
+ SSYNC();
+
+ bfin_write_USB_EP_NI0_RXMAXP(64);
+ SSYNC();
+
+ bfin_write_USB_EP_NI0_TXMAXP(64);
+ SSYNC();
+
+ /* Route INTRUSB/INTR_RX/INTR_TX to USB_INT0*/
+ bfin_write_USB_GLOBINTR(0x7);
+ SSYNC();
+
+ bfin_write_USB_GLOBAL_CTL(GLOBAL_ENA | EP1_TX_ENA | EP2_TX_ENA |
+ EP3_TX_ENA | EP4_TX_ENA | EP5_TX_ENA |
+ EP6_TX_ENA | EP7_TX_ENA | EP1_RX_ENA |
+ EP2_RX_ENA | EP3_RX_ENA | EP4_RX_ENA |
+ EP5_RX_ENA | EP6_RX_ENA | EP7_RX_ENA);
+ SSYNC();
+
+ return 0;
+}
+
+/*
+ * This function performs Blackfin platform specific deinitialization for usb.
+*/
+void musb_platform_deinit(void)
+{
+}
diff --git a/drivers/usb/musb/blackfin_usb.h b/drivers/usb/musb/blackfin_usb.h
new file mode 100644
index 0000000..ab26ca2
--- /dev/null
+++ b/drivers/usb/musb/blackfin_usb.h
@@ -0,0 +1,99 @@
+/*
+ * Blackfin MUSB HCD (Host Controller Driver) for u-boot
+ *
+ * Copyright (c) 2008-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BLACKFIN_USB_H__
+#define __BLACKFIN_USB_H__
+
+#include <linux/types.h>
+
+/* Every register is 32bit aligned, but only 16bits in size */
+#define ureg(name) u16 name; u16 __pad_##name;
+
+#define musb_regs musb_regs
+struct musb_regs {
+ /* common registers */
+ ureg(faddr)
+ ureg(power)
+ ureg(intrtx)
+ ureg(intrrx)
+ ureg(intrtxe)
+ ureg(intrrxe)
+ ureg(intrusb)
+ ureg(intrusbe)
+ ureg(frame)
+ ureg(index)
+ ureg(testmode)
+ ureg(globintr)
+ ureg(global_ctl)
+ u32 reserved0[3];
+ /* indexed registers */
+ ureg(txmaxp)
+ ureg(txcsr)
+ ureg(rxmaxp)
+ ureg(rxcsr)
+ ureg(rxcount)
+ ureg(txtype)
+ ureg(txinterval)
+ ureg(rxtype)
+ ureg(rxinterval)
+ u32 reserved1;
+ ureg(txcount)
+ u32 reserved2[5];
+ /* fifo */
+ u16 fifox[32];
+ /* OTG, dynamic FIFO, version & vendor registers */
+ u32 reserved3[16];
+ ureg(devctl)
+ ureg(vbus_irq)
+ ureg(vbus_mask)
+ u32 reserved4[15];
+ ureg(linkinfo)
+ ureg(vplen)
+ ureg(hseof1)
+ ureg(fseof1)
+ ureg(lseof1)
+ u32 reserved5[41];
+ /* target address registers */
+ struct musb_tar_regs {
+ ureg(txmaxp)
+ ureg(txcsr)
+ ureg(rxmaxp)
+ ureg(rxcsr)
+ ureg(rxcount)
+ ureg(txtype)
+ ureg(txinternal)
+ ureg(rxtype)
+ ureg(rxinternal)
+ u32 reserved6;
+ ureg(txcount)
+ u32 reserved7[5];
+ } tar[8];
+} __attribute__((packed));
+
+struct bfin_musb_dma_regs {
+ ureg(interrupt);
+ ureg(control);
+ ureg(addr_low);
+ ureg(addr_high);
+ ureg(count_low);
+ ureg(count_high);
+ ureg(pad);
+};
+
+#undef ureg
+
+/* EP5-EP7 are the only ones with 1024 byte FIFOs which BULK really needs */
+#define MUSB_BULK_EP 5
+
+/* Blackfin FIFO's are static */
+#define MUSB_NO_DYNAMIC_FIFO
+
+/* No HUB support :( */
+#define MUSB_NO_MULTIPOINT
+
+#endif
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index cee7a11..f0f0301 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -38,6 +38,10 @@
#include <usb_defs.h>
#include <asm/io.h>
+#ifdef CONFIG_USB_BLACKFIN
+# include "blackfin_usb.h"
+#endif
+
#define MUSB_EP0_FIFOSIZE 64 /* This is non-configurable */
/* EP0 */
@@ -71,6 +75,7 @@ struct musb_epN_regs {
};
/* Mentor USB core register overlay structure */
+#ifndef musb_regs
struct musb_regs {
/* common registers */
u8 faddr;
@@ -138,6 +143,7 @@ struct musb_regs {
} ep[16];
} __attribute__((packed, aligned(32)));
+#endif
/*
* MUSB Register bits
@@ -347,4 +353,14 @@ extern void musb_configure_ep(struct musb_epinfo *epinfo, u8 cnt);
extern void write_fifo(u8 ep, u32 length, void *fifo_data);
extern void read_fifo(u8 ep, u32 length, void *fifo_data);
+#if defined(CONFIG_USB_BLACKFIN)
+/* Every USB register is accessed as a 16-bit even if the value itself
+ * is only 8-bits in size. Fun stuff.
+ */
+# undef readb
+# define readb(addr) (u8)bfin_read16(addr)
+# undef writeb
+# define writeb(b, addr) bfin_write16(addr, b)
+#endif
+
#endif /* __MUSB_HDRC_DEFS_H__ */
diff --git a/drivers/usb/musb/musb_hcd.h b/drivers/usb/musb/musb_hcd.h
index 17e9091..a437985 100644
--- a/drivers/usb/musb/musb_hcd.h
+++ b/drivers/usb/musb/musb_hcd.h
@@ -38,7 +38,9 @@ extern unsigned char new[];
#define MUSB_CONTROL_EP 0
/* This defines the endpoint number used for bulk transfer */
-#define MUSB_BULK_EP 1
+#ifndef MUSB_BULK_EP
+# define MUSB_BULK_EP 1
+#endif
/* This defines the endpoint number used for interrupt transfer */
#define MUSB_INTR_EP 2