summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/i2c/Makefile1
-rw-r--r--drivers/i2c/bfin-twi_i2c.c74
-rw-r--r--drivers/i2c/omap24xx_i2c.c166
-rw-r--r--drivers/i2c/pca9564_i2c.c189
-rw-r--r--drivers/i2c/s3c24x0_i2c.c6
-rw-r--r--drivers/i2c/soft_i2c.c5
-rw-r--r--drivers/mmc/omap3_mmc.c2
-rw-r--r--drivers/mtd/nand/davinci_nand.c23
-rw-r--r--drivers/mtd/nand/fsl_elbc_nand.c4
-rw-r--r--drivers/mtd/nand/nand_base.c147
-rw-r--r--drivers/mtd/nand/nand_bbt.c41
-rw-r--r--drivers/mtd/nand/nand_util.c4
-rw-r--r--drivers/mtd/nand/s3c2410_nand.c33
-rw-r--r--drivers/mtd/nand/s3c64xx.c2
-rw-r--r--drivers/mtd/onenand/onenand_base.c742
-rw-r--r--drivers/mtd/onenand/onenand_bbt.c14
-rw-r--r--drivers/mtd/onenand/onenand_uboot.c4
-rw-r--r--drivers/rtc/ftrtc010.c52
-rw-r--r--drivers/rtc/m41t94.c1
-rw-r--r--drivers/rtc/s3c24x0_rtc.c6
-rw-r--r--drivers/serial/s3c64xx.c2
-rw-r--r--drivers/serial/serial_s3c24x0.c6
-rw-r--r--drivers/serial/serial_s5pc1xx.c24
-rw-r--r--drivers/usb/host/ohci-hcd.c3
-rw-r--r--drivers/usb/host/s3c64xx-hcd.c2
-rw-r--r--drivers/video/cfb_console.c4
-rw-r--r--drivers/video/mb862xx.c50
27 files changed, 1311 insertions, 296 deletions
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 4a12976..b860e89 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -33,6 +33,7 @@ COBJS-$(CONFIG_I2C_MXC) += mxc_i2c.o
COBJS-$(CONFIG_DRIVER_OMAP1510_I2C) += omap1510_i2c.o
COBJS-$(CONFIG_DRIVER_OMAP24XX_I2C) += omap24xx_i2c.o
COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += omap24xx_i2c.o
+COBJS-$(CONFIG_PCA9564_I2C) += pca9564_i2c.o
COBJS-$(CONFIG_DRIVER_S3C24X0_I2C) += s3c24x0_i2c.o
COBJS-$(CONFIG_S3C44B0_I2C) += s3c44b0_i2c.o
COBJS-$(CONFIG_SOFT_I2C) += soft_i2c.o
diff --git a/drivers/i2c/bfin-twi_i2c.c b/drivers/i2c/bfin-twi_i2c.c
index e790634..73a78d2 100644
--- a/drivers/i2c/bfin-twi_i2c.c
+++ b/drivers/i2c/bfin-twi_i2c.c
@@ -26,6 +26,7 @@
#ifdef TWI0_CLKDIV
#define bfin_write_TWI_CLKDIV(val) bfin_write_TWI0_CLKDIV(val)
+#define bfin_read_TWI_CLKDIV(val) bfin_read_TWI0_CLKDIV(val)
#define bfin_write_TWI_CONTROL(val) bfin_write_TWI0_CONTROL(val)
#define bfin_read_TWI_CONTROL(val) bfin_read_TWI0_CONTROL(val)
#define bfin_write_TWI_MASTER_ADDR(val) bfin_write_TWI0_MASTER_ADDR(val)
@@ -44,8 +45,21 @@
#ifdef CONFIG_TWICLK_KHZ
# error do not define CONFIG_TWICLK_KHZ ... use CONFIG_SYS_I2C_SPEED
#endif
-#if CONFIG_SYS_I2C_SPEED > 400000
-# error The Blackfin I2C hardware can only operate at 400KHz max
+
+/*
+ * The way speed is changed into duty often results in integer truncation
+ * with 50% duty, so we'll force rounding up to the next duty by adding 1
+ * to the max. In practice this will get us a speed of something like
+ * 385 KHz. The other limit is easy to handle as it is only 8 bits.
+ */
+#define I2C_SPEED_MAX 400000
+#define I2C_SPEED_TO_DUTY(speed) (5000000 / (speed))
+#define I2C_DUTY_MAX (I2C_SPEED_TO_DUTY(I2C_SPEED_MAX) + 1)
+#define I2C_DUTY_MIN 0xff /* 8 bit limited */
+#define SYS_I2C_DUTY I2C_SPEED_TO_DUTY(CONFIG_SYS_I2C_SPEED)
+/* Note: duty is inverse of speed, so the comparisons below are correct */
+#if SYS_I2C_DUTY < I2C_DUTY_MAX || SYS_I2C_DUTY > I2C_DUTY_MIN
+# error "The Blackfin I2C hardware can only operate 20KHz - 400KHz"
#endif
/* All transfers are described by this data structure */
@@ -60,6 +74,9 @@ struct i2c_msg {
u8 *abuf; /* addr buffer */
};
+/* Allow msec timeout per ~byte transfer */
+#define I2C_TIMEOUT 10
+
/**
* wait_for_completion - manage the actual i2c transfer
* @msg: the i2c msg
@@ -67,8 +84,9 @@ struct i2c_msg {
static int wait_for_completion(struct i2c_msg *msg)
{
uint16_t int_stat;
+ ulong timebase = get_timer(0);
- while (!ctrlc()) {
+ do {
int_stat = bfin_read_TWI_INT_STAT();
if (int_stat & XMTSERV) {
@@ -103,7 +121,7 @@ static int wait_for_completion(struct i2c_msg *msg)
debugi("processing MERR");
bfin_write_TWI_INT_STAT(MERR);
SSYNC();
- break;
+ return msg->len;
}
if (int_stat & MCOMP) {
debugi("processing MCOMP");
@@ -116,7 +134,12 @@ static int wait_for_completion(struct i2c_msg *msg)
} else
break;
}
- }
+
+ /* If we were able to do something, reset timeout */
+ if (int_stat)
+ timebase = get_timer(0);
+
+ } while (get_timer(timebase) < I2C_TIMEOUT);
return msg->len;
}
@@ -204,7 +227,36 @@ static int i2c_transfer(uchar chip, uint addr, int alen, uchar *buffer, int len,
return ret;
}
-/*
+/**
+ * i2c_set_bus_speed - set i2c bus speed
+ * @speed: bus speed (in HZ)
+ */
+int i2c_set_bus_speed(unsigned int speed)
+{
+ u16 clkdiv = I2C_SPEED_TO_DUTY(speed);
+
+ /* Set TWI interface clock */
+ if (clkdiv < I2C_DUTY_MAX || clkdiv > I2C_DUTY_MIN)
+ return -1;
+ bfin_write_TWI_CLKDIV((clkdiv << 8) | (clkdiv & 0xff));
+
+ /* Don't turn it on */
+ bfin_write_TWI_MASTER_CTL(speed > 100000 ? FAST : 0);
+
+ return 0;
+}
+
+/**
+ * i2c_get_bus_speed - get i2c bus speed
+ * @speed: bus speed (in HZ)
+ */
+unsigned int i2c_get_bus_speed(void)
+{
+ /* 10 MHz / (2 * CLKDIV) -> 5 MHz / CLKDIV */
+ return 5000000 / (bfin_read_TWI_CLKDIV() & 0xff);
+}
+
+/**
* i2c_init - initialize the i2c bus
* @speed: bus speed (in HZ)
* @slaveaddr: address of device in slave mode (0 - not slave)
@@ -220,15 +272,9 @@ void i2c_init(int speed, int slaveaddr)
bfin_write_TWI_CONTROL(prescale);
/* Set TWI interface clock as specified */
- bfin_write_TWI_CLKDIV(
- ((5 * 1024 / (speed / 1000)) << 8) |
- ((5 * 1024 / (speed / 1000)) & 0xFF)
- );
-
- /* Don't turn it on */
- bfin_write_TWI_MASTER_CTL(speed > 100000 ? FAST : 0);
+ i2c_set_bus_speed(speed);
- /* But enable it */
+ /* Enable it */
bfin_write_TWI_CONTROL(TWI_ENA | prescale);
SSYNC();
diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
index 1a4c8c9..ff18991 100644
--- a/drivers/i2c/omap24xx_i2c.c
+++ b/drivers/i2c/omap24xx_i2c.c
@@ -29,6 +29,11 @@ static void wait_for_bb (void);
static u16 wait_for_pin (void);
static void flush_fifo(void);
+static struct i2c *i2c_base = (struct i2c *)I2C_DEFAULT_BASE;
+
+static unsigned int bus_initialized[I2C_BUS_MAX];
+static unsigned int current_bus;
+
void i2c_init (int speed, int slaveadd)
{
int psc, fsscll, fssclh;
@@ -95,30 +100,32 @@ void i2c_init (int speed, int slaveadd)
sclh = (unsigned int)fssclh;
}
- writew(0x2, I2C_SYSC); /* for ES2 after soft reset */
+ writew(0x2, &i2c_base->sysc); /* for ES2 after soft reset */
udelay(1000);
- writew(0x0, I2C_SYSC); /* will probably self clear but */
+ writew(0x0, &i2c_base->sysc); /* will probably self clear but */
- if (readw (I2C_CON) & I2C_CON_EN) {
- writew (0, I2C_CON);
+ if (readw (&i2c_base->con) & I2C_CON_EN) {
+ writew (0, &i2c_base->con);
udelay (50000);
}
- writew(psc, I2C_PSC);
- writew(scll, I2C_SCLL);
- writew(sclh, I2C_SCLH);
+ writew(psc, &i2c_base->psc);
+ writew(scll, &i2c_base->scll);
+ writew(sclh, &i2c_base->sclh);
/* own address */
- writew (slaveadd, I2C_OA);
- writew (I2C_CON_EN, I2C_CON);
+ writew (slaveadd, &i2c_base->oa);
+ writew (I2C_CON_EN, &i2c_base->con);
/* have to enable intrrupts or OMAP i2c module doesn't work */
writew (I2C_IE_XRDY_IE | I2C_IE_RRDY_IE | I2C_IE_ARDY_IE |
- I2C_IE_NACK_IE | I2C_IE_AL_IE, I2C_IE);
+ I2C_IE_NACK_IE | I2C_IE_AL_IE, &i2c_base->ie);
udelay (1000);
flush_fifo();
- writew (0xFFFF, I2C_STAT);
- writew (0, I2C_CNT);
+ writew (0xFFFF, &i2c_base->stat);
+ writew (0, &i2c_base->cnt);
+
+ bus_initialized[current_bus] = 1;
}
static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value)
@@ -130,19 +137,19 @@ static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value)
wait_for_bb ();
/* one byte only */
- writew (1, I2C_CNT);
+ writew (1, &i2c_base->cnt);
/* set slave address */
- writew (devaddr, I2C_SA);
+ writew (devaddr, &i2c_base->sa);
/* no stop bit needed here */
- writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX, I2C_CON);
+ writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX, &i2c_base->con);
status = wait_for_pin ();
if (status & I2C_STAT_XRDY) {
/* Important: have to use byte access */
- writeb (regoffset, I2C_DATA);
+ writeb (regoffset, &i2c_base->data);
udelay (20000);
- if (readw (I2C_STAT) & I2C_STAT_NACK) {
+ if (readw (&i2c_base->stat) & I2C_STAT_NACK) {
i2c_error = 1;
}
} else {
@@ -151,28 +158,28 @@ static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value)
if (!i2c_error) {
/* free bus, otherwise we can't use a combined transction */
- writew (0, I2C_CON);
- while (readw (I2C_STAT) || (readw (I2C_CON) & I2C_CON_MST)) {
+ writew (0, &i2c_base->con);
+ while (readw (&i2c_base->stat) || (readw (&i2c_base->con) & I2C_CON_MST)) {
udelay (10000);
/* Have to clear pending interrupt to clear I2C_STAT */
- writew (0xFFFF, I2C_STAT);
+ writew (0xFFFF, &i2c_base->stat);
}
wait_for_bb ();
/* set slave address */
- writew (devaddr, I2C_SA);
+ writew (devaddr, &i2c_base->sa);
/* read one byte from slave */
- writew (1, I2C_CNT);
+ writew (1, &i2c_base->cnt);
/* need stop bit here */
writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP,
- I2C_CON);
+ &i2c_base->con);
status = wait_for_pin ();
if (status & I2C_STAT_RRDY) {
#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
- *value = readb (I2C_DATA);
+ *value = readb (&i2c_base->data);
#else
- *value = readw (I2C_DATA);
+ *value = readw (&i2c_base->data);
#endif
udelay (20000);
} else {
@@ -180,17 +187,17 @@ static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value)
}
if (!i2c_error) {
- writew (I2C_CON_EN, I2C_CON);
- while (readw (I2C_STAT)
- || (readw (I2C_CON) & I2C_CON_MST)) {
+ writew (I2C_CON_EN, &i2c_base->con);
+ while (readw (&i2c_base->stat)
+ || (readw (&i2c_base->con) & I2C_CON_MST)) {
udelay (10000);
- writew (0xFFFF, I2C_STAT);
+ writew (0xFFFF, &i2c_base->stat);
}
}
}
flush_fifo();
- writew (0xFFFF, I2C_STAT);
- writew (0, I2C_CNT);
+ writew (0xFFFF, &i2c_base->stat);
+ writew (0, &i2c_base->cnt);
return i2c_error;
}
@@ -203,12 +210,12 @@ static int i2c_write_byte (u8 devaddr, u8 regoffset, u8 value)
wait_for_bb ();
/* two bytes */
- writew (2, I2C_CNT);
+ writew (2, &i2c_base->cnt);
/* set slave address */
- writew (devaddr, I2C_SA);
+ writew (devaddr, &i2c_base->sa);
/* stop bit needed here */
writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX |
- I2C_CON_STP, I2C_CON);
+ I2C_CON_STP, &i2c_base->con);
/* wait until state change */
status = wait_for_pin ();
@@ -216,24 +223,24 @@ static int i2c_write_byte (u8 devaddr, u8 regoffset, u8 value)
if (status & I2C_STAT_XRDY) {
#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
/* send out 1 byte */
- writeb (regoffset, I2C_DATA);
- writew (I2C_STAT_XRDY, I2C_STAT);
+ writeb (regoffset, &i2c_base->data);
+ writew (I2C_STAT_XRDY, &i2c_base->stat);
status = wait_for_pin ();
if ((status & I2C_STAT_XRDY)) {
/* send out next 1 byte */
- writeb (value, I2C_DATA);
- writew (I2C_STAT_XRDY, I2C_STAT);
+ writeb (value, &i2c_base->data);
+ writew (I2C_STAT_XRDY, &i2c_base->stat);
} else {
i2c_error = 1;
}
#else
/* send out two bytes */
- writew ((value << 8) + regoffset, I2C_DATA);
+ writew ((value << 8) + regoffset, &i2c_base->data);
#endif
/* must have enough delay to allow BB bit to go low */
udelay (50000);
- if (readw (I2C_STAT) & I2C_STAT_NACK) {
+ if (readw (&i2c_base->stat) & I2C_STAT_NACK) {
i2c_error = 1;
}
} else {
@@ -243,18 +250,18 @@ static int i2c_write_byte (u8 devaddr, u8 regoffset, u8 value)
if (!i2c_error) {
int eout = 200;
- writew (I2C_CON_EN, I2C_CON);
- while ((stat = readw (I2C_STAT)) || (readw (I2C_CON) & I2C_CON_MST)) {
+ writew (I2C_CON_EN, &i2c_base->con);
+ while ((stat = readw (&i2c_base->stat)) || (readw (&i2c_base->con) & I2C_CON_MST)) {
udelay (1000);
/* have to read to clear intrrupt */
- writew (0xFFFF, I2C_STAT);
+ writew (0xFFFF, &i2c_base->stat);
if(--eout == 0) /* better leave with error than hang */
break;
}
}
flush_fifo();
- writew (0xFFFF, I2C_STAT);
- writew (0, I2C_CNT);
+ writew (0xFFFF, &i2c_base->stat);
+ writew (0, &i2c_base->cnt);
return i2c_error;
}
@@ -265,14 +272,14 @@ static void flush_fifo(void)
* you get a bus error
*/
while(1){
- stat = readw(I2C_STAT);
+ stat = readw(&i2c_base->stat);
if(stat == I2C_STAT_RRDY){
#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
- readb(I2C_DATA);
+ readb(&i2c_base->data);
#else
- readw(I2C_DATA);
+ readw(&i2c_base->data);
#endif
- writew(I2C_STAT_RRDY,I2C_STAT);
+ writew(I2C_STAT_RRDY,&i2c_base->stat);
udelay(1000);
}else
break;
@@ -283,7 +290,7 @@ int i2c_probe (uchar chip)
{
int res = 1; /* default = fail */
- if (chip == readw (I2C_OA)) {
+ if (chip == readw (&i2c_base->oa)) {
return res;
}
@@ -291,27 +298,27 @@ int i2c_probe (uchar chip)
wait_for_bb ();
/* try to read one byte */
- writew (1, I2C_CNT);
+ writew (1, &i2c_base->cnt);
/* set slave address */
- writew (chip, I2C_SA);
+ writew (chip, &i2c_base->sa);
/* stop bit needed here */
- writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP, I2C_CON);
+ writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP, &i2c_base->con);
/* enough delay for the NACK bit set */
udelay (50000);
- if (!(readw (I2C_STAT) & I2C_STAT_NACK)) {
+ if (!(readw (&i2c_base->stat) & I2C_STAT_NACK)) {
res = 0; /* success case */
flush_fifo();
- writew(0xFFFF, I2C_STAT);
+ writew(0xFFFF, &i2c_base->stat);
} else {
- writew(0xFFFF, I2C_STAT); /* failue, clear sources*/
- writew (readw (I2C_CON) | I2C_CON_STP, I2C_CON); /* finish up xfer */
+ writew(0xFFFF, &i2c_base->stat); /* failue, clear sources*/
+ writew (readw (&i2c_base->con) | I2C_CON_STP, &i2c_base->con); /* finish up xfer */
udelay(20000);
wait_for_bb ();
}
flush_fifo();
- writew (0, I2C_CNT); /* don't allow any more data in...we don't want it.*/
- writew(0xFFFF, I2C_STAT);
+ writew (0, &i2c_base->cnt); /* don't allow any more data in...we don't want it.*/
+ writew(0xFFFF, &i2c_base->stat);
return res;
}
@@ -370,17 +377,17 @@ static void wait_for_bb (void)
int timeout = 10;
u16 stat;
- writew(0xFFFF, I2C_STAT); /* clear current interruts...*/
- while ((stat = readw (I2C_STAT) & I2C_STAT_BB) && timeout--) {
- writew (stat, I2C_STAT);
+ writew(0xFFFF, &i2c_base->stat); /* clear current interruts...*/
+ while ((stat = readw (&i2c_base->stat) & I2C_STAT_BB) && timeout--) {
+ writew (stat, &i2c_base->stat);
udelay (50000);
}
if (timeout <= 0) {
printf ("timed out in wait_for_bb: I2C_STAT=%x\n",
- readw (I2C_STAT));
+ readw (&i2c_base->stat));
}
- writew(0xFFFF, I2C_STAT); /* clear delayed stuff*/
+ writew(0xFFFF, &i2c_base->stat); /* clear delayed stuff*/
}
static u16 wait_for_pin (void)
@@ -390,7 +397,7 @@ static u16 wait_for_pin (void)
do {
udelay (1000);
- status = readw (I2C_STAT);
+ status = readw (&i2c_base->stat);
} while ( !(status &
(I2C_STAT_ROVR | I2C_STAT_XUDF | I2C_STAT_XRDY |
I2C_STAT_RRDY | I2C_STAT_ARDY | I2C_STAT_NACK |
@@ -398,8 +405,33 @@ static u16 wait_for_pin (void)
if (timeout <= 0) {
printf ("timed out in wait_for_pin: I2C_STAT=%x\n",
- readw (I2C_STAT));
- writew(0xFFFF, I2C_STAT);
+ readw (&i2c_base->stat));
+ writew(0xFFFF, &i2c_base->stat);
}
return status;
}
+
+int i2c_set_bus_num(unsigned int bus)
+{
+ if ((bus < 0) || (bus >= I2C_BUS_MAX)) {
+ printf("Bad bus: %d\n", bus);
+ return -1;
+ }
+
+#if I2C_BUS_MAX==3
+ if (bus == 2)
+ i2c_base = (struct i2c *)I2C_BASE3;
+ else
+#endif
+ if (bus == 1)
+ i2c_base = (struct i2c *)I2C_BASE2;
+ else
+ i2c_base = (struct i2c *)I2C_BASE1;
+
+ current_bus = bus;
+
+ if(!bus_initialized[current_bus])
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+
+ return 0;
+}
diff --git a/drivers/i2c/pca9564_i2c.c b/drivers/i2c/pca9564_i2c.c
new file mode 100644
index 0000000..199a9ee
--- /dev/null
+++ b/drivers/i2c/pca9564_i2c.c
@@ -0,0 +1,189 @@
+/*
+ * File: drivers/i2c/pca9564.c
+ * Based on: drivers/i2c/s3c44b0_i2c.c
+ * Author:
+ *
+ * Created: 2009-06-23
+ * Description: PCA9564 i2c bridge driver
+ *
+ * Modified:
+ * Copyright 2009 CJSC "NII STT", http://www.niistt.ru/
+ *
+ * Bugs:
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <pca9564.h>
+#include <asm/io.h>
+
+#define PCA_STA (CONFIG_PCA9564_BASE + 0)
+#define PCA_TO (CONFIG_PCA9564_BASE + 0)
+#define PCA_DAT (CONFIG_PCA9564_BASE + (1 << 2))
+#define PCA_ADR (CONFIG_PCA9564_BASE + (2 << 2))
+#define PCA_CON (CONFIG_PCA9564_BASE + (3 << 2))
+
+static unsigned char pca_read_reg(unsigned int reg)
+{
+ return readb((void *)reg);
+}
+
+static void pca_write_reg(unsigned int reg, unsigned char value)
+{
+ writeb(value, (void *)reg);
+}
+
+static int pca_wait_busy(void)
+{
+ unsigned int timeout = 10000;
+
+ while (!(pca_read_reg(PCA_CON) & PCA_CON_SI) && --timeout)
+ udelay(1);
+
+ if (timeout == 0)
+ debug("I2C timeout!\n");
+
+ debug("CON = 0x%02x, STA = 0x%02x\n", pca_read_reg(PCA_CON),
+ pca_read_reg(PCA_STA));
+
+ return timeout ? 0 : 1;
+}
+
+/*=====================================================================*/
+/* Public Functions */
+/*=====================================================================*/
+
+/*-----------------------------------------------------------------------
+ * Initialization
+ */
+void i2c_init(int speed, int slaveaddr)
+{
+ pca_write_reg(PCA_CON, PCA_CON_ENSIO | speed);
+}
+
+/*
+ * Probe the given I2C chip address. Returns 0 if a chip responded,
+ * not 0 on failure.
+ */
+
+int i2c_probe(uchar chip)
+{
+ unsigned char res;
+
+ pca_write_reg(PCA_CON, PCA_CON_STA | PCA_CON_ENSIO);
+ pca_wait_busy();
+
+ pca_write_reg(PCA_CON, PCA_CON_STA | PCA_CON_ENSIO);
+
+ pca_write_reg(PCA_DAT, (chip << 1) | 1);
+ res = pca_wait_busy();
+
+ if ((res == 0) && (pca_read_reg(PCA_STA) == 0x48))
+ res = 1;
+
+ pca_write_reg(PCA_CON, PCA_CON_STO | PCA_CON_ENSIO);
+
+ return res;
+}
+
+/*
+ * Read/Write interface:
+ * chip: I2C chip address, range 0..127
+ * addr: Memory (register) address within the chip
+ * alen: Number of bytes to use for addr (typically 1, 2 for larger
+ * memories, 0 for register type devices with only one
+ * register)
+ * buffer: Where to read/write the data
+ * len: How many bytes to read/write
+ *
+ * Returns: 0 on success, not 0 on failure
+ */
+int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+ int i;
+
+ pca_write_reg(PCA_CON, PCA_CON_ENSIO | PCA_CON_STA);
+ pca_wait_busy();
+
+ pca_write_reg(PCA_CON, PCA_CON_ENSIO);
+
+ pca_write_reg(PCA_DAT, (chip << 1));
+ pca_wait_busy();
+ pca_write_reg(PCA_CON, PCA_CON_ENSIO);
+
+ if (alen > 0) {
+ pca_write_reg(PCA_DAT, addr);
+ pca_wait_busy();
+ pca_write_reg(PCA_CON, PCA_CON_ENSIO);
+ }
+
+ pca_write_reg(PCA_CON, PCA_CON_ENSIO | PCA_CON_STO);
+
+ udelay(500);
+
+ pca_write_reg(PCA_CON, PCA_CON_ENSIO | PCA_CON_STA);
+ pca_wait_busy();
+ pca_write_reg(PCA_CON, PCA_CON_ENSIO);
+
+ pca_write_reg(PCA_DAT, (chip << 1) | 1);
+ pca_wait_busy();
+
+ for (i = 0; i < len; ++i) {
+ if (i == len - 1)
+ pca_write_reg(PCA_CON, PCA_CON_ENSIO);
+ else
+ pca_write_reg(PCA_CON, PCA_CON_ENSIO | PCA_CON_AA);
+
+ pca_wait_busy();
+ buffer[i] = pca_read_reg(PCA_DAT);
+
+ }
+
+ pca_write_reg(PCA_CON, PCA_CON_ENSIO | PCA_CON_STO);
+
+ return 0;
+}
+
+int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+ int i;
+
+ pca_write_reg(PCA_CON, PCA_CON_ENSIO | PCA_CON_STA);
+ pca_wait_busy();
+ pca_write_reg(PCA_CON, PCA_CON_ENSIO);
+
+ pca_write_reg(PCA_DAT, chip << 1);
+ pca_wait_busy();
+ pca_write_reg(PCA_CON, PCA_CON_ENSIO);
+
+ if (alen > 0) {
+ pca_write_reg(PCA_DAT, addr);
+ pca_wait_busy();
+ pca_write_reg(PCA_CON, PCA_CON_ENSIO);
+ }
+
+ for (i = 0; i < len; ++i) {
+ pca_write_reg(PCA_DAT, buffer[i]);
+ pca_wait_busy();
+ pca_write_reg(PCA_CON, PCA_CON_ENSIO);
+ }
+
+ pca_write_reg(PCA_CON, PCA_CON_STO | PCA_CON_ENSIO);
+
+ return 0;
+}
diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c
index 55c6a12..c8371cf 100644
--- a/drivers/i2c/s3c24x0_i2c.c
+++ b/drivers/i2c/s3c24x0_i2c.c
@@ -27,11 +27,7 @@
*/
#include <common.h>
-#if defined(CONFIG_S3C2400)
-#include <s3c2400.h>
-#elif defined(CONFIG_S3C2410)
-#include <s3c2410.h>
-#endif
+#include <asm/arch/s3c24x0_cpu.h>
#include <asm/io.h>
#include <i2c.h>
diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c
index 59883a5..9a48783 100644
--- a/drivers/i2c/soft_i2c.c
+++ b/drivers/i2c/soft_i2c.c
@@ -34,6 +34,11 @@
#include <asm/io.h>
#include <asm/arch/hardware.h>
#endif
+#ifdef CONFIG_AT91SAM9263 /* only valid for AT91SAM9263 */
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+#endif
#ifdef CONFIG_IXP425 /* only valid for IXP425 */
#include <asm/arch/ixp425.h>
#endif
diff --git a/drivers/mmc/omap3_mmc.c b/drivers/mmc/omap3_mmc.c
index 513dd25..96c0e65 100644
--- a/drivers/mmc/omap3_mmc.c
+++ b/drivers/mmc/omap3_mmc.c
@@ -63,7 +63,9 @@ unsigned char mmc_board_init(void)
{
t2_t *t2_base = (t2_t *)T2_BASE;
+#if defined(CONFIG_TWL4030_POWER)
twl4030_power_mmc_init();
+#endif
writel(readl(&t2_base->pbias_lite) | PBIASLITEPWRDNZ1 |
PBIASSPEEDCTRL0 | PBIASLITEPWRDNZ0,
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index eabaf3e..41a9568 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -182,13 +182,7 @@ static int nand_davinci_correct_data(struct mtd_info *mtd, u_char *dat, u_char *
#ifdef CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
static struct nand_ecclayout nand_davinci_4bit_layout_oobfirst = {
-/*
- * TI uses a different layout for 4K page deviecs. Since the
- * eccpos filed can hold only a limited number of entries, adding
- * support for 4K page will result in compilation warnings
- * 4K Support will be added later
- */
-#ifdef CONFIG_SYS_NAND_PAGE_2K
+#if defined(CONFIG_SYS_NAND_PAGE_2K)
.eccbytes = 40,
.eccpos = {
24, 25, 26, 27, 28,
@@ -200,6 +194,21 @@ static struct nand_ecclayout nand_davinci_4bit_layout_oobfirst = {
.oobfree = {
{.offset = 2, .length = 22, },
},
+#elif defined(CONFIG_SYS_NAND_PAGE_4K)
+ .eccbytes = 80,
+ .eccpos = {
+ 48, 49, 50, 51, 52, 53, 54, 55, 56, 57,
+ 58, 59, 60, 61, 62, 63, 64, 65, 66, 67,
+ 68, 69, 70, 71, 72, 73, 74, 75, 76, 77,
+ 78, 79, 80, 81, 82, 83, 84, 85, 86, 87,
+ 88, 89, 90, 91, 92, 93, 94, 95, 96, 97,
+ 98, 99, 100, 101, 102, 103, 104, 105, 106, 107,
+ 108, 109, 110, 111, 112, 113, 114, 115, 116, 117,
+ 118, 119, 120, 121, 122, 123, 124, 125, 126, 127,
+ },
+ .oobfree = {
+ {.offset = 2, .length = 46, },
+ },
#endif
};
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 50cb4aa..146e9bf 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -766,9 +766,6 @@ int board_nand_init(struct nand_chip *nand)
nand->waitfunc = fsl_elbc_wait;
/* set up nand options */
- /* redirect the pointer of bbt pattern to RAM */
- bbt_main_descr.pattern = bbt_pattern;
- bbt_mirror_descr.pattern = mirror_pattern;
nand->bbt_td = &bbt_main_descr;
nand->bbt_md = &bbt_mirror_descr;
@@ -815,7 +812,6 @@ int board_nand_init(struct nand_chip *nand)
/* Large-page-specific setup */
if (or & OR_FCM_PGS) {
priv->page_size = 1;
- largepage_memorybased.pattern = scan_ff_pattern;
nand->badblock_pattern = &largepage_memorybased;
/* adjust ecc setup if needed */
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 426bb95..7171bdd 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -893,6 +893,9 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *this)
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+ * @page: page number to read
+ *
+ * Not for syndrome calculating ecc controllers, which use a special oob layout
*/
static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int page)
@@ -903,10 +906,53 @@ static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
+ * nand_read_page_raw_syndrome - [Intern] read raw page data without ecc
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @page: page number to read
+ *
+ * We need a special oob layout and handling even when OOB isn't used.
+ */
+static int nand_read_page_raw_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int page)
+{
+ int eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ uint8_t *oob = chip->oob_poi;
+ int steps, size;
+
+ for (steps = chip->ecc.steps; steps > 0; steps--) {
+ chip->read_buf(mtd, buf, eccsize);
+ buf += eccsize;
+
+ if (chip->ecc.prepad) {
+ chip->read_buf(mtd, oob, chip->ecc.prepad);
+ oob += chip->ecc.prepad;
+ }
+
+ chip->read_buf(mtd, oob, eccbytes);
+ oob += eccbytes;
+
+ if (chip->ecc.postpad) {
+ chip->read_buf(mtd, oob, chip->ecc.postpad);
+ oob += chip->ecc.postpad;
+ }
+ }
+
+ size = mtd->oobsize - (oob - chip->oob_poi);
+ if (size)
+ chip->read_buf(mtd, oob, size);
+
+ return 0;
+}
+
+/**
* nand_read_page_swecc - [REPLACABLE] software ecc based page read function
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+ * @page: page number to read
*/
static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int page)
@@ -946,9 +992,9 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
* nand_read_subpage - [REPLACABLE] software ecc based sub-page read function
* @mtd: mtd info structure
* @chip: nand chip info structure
- * @dataofs offset of requested data within the page
- * @readlen data length
- * @buf: buffer to store read data
+ * @data_offs: offset of requested data within the page
+ * @readlen: data length
+ * @bufpoi: buffer to store read data
*/
static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi)
{
@@ -1015,7 +1061,7 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint3
int stat;
stat = chip->ecc.correct(mtd, p, &chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]);
- if (stat < 0)
+ if (stat == -1)
mtd->ecc_stats.failed++;
else
mtd->ecc_stats.corrected += stat;
@@ -1028,6 +1074,7 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint3
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+ * @page: page number to read
*
* Not for syndrome calculating ecc controllers which need a special oob layout
*/
@@ -1059,7 +1106,7 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
int stat;
stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
- if (stat == -1)
+ if (stat < 0)
mtd->ecc_stats.failed++;
else
mtd->ecc_stats.corrected += stat;
@@ -1072,6 +1119,7 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+ * @page: page number to read
*
* Hardware ECC for large page chips, require OOB to be read first.
* For this ECC mode, the write_page method is re-used from ECC_HW.
@@ -1120,6 +1168,7 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+ * @page: page number to read
*
* The hw generator calculates the error syndrome automatically. Therefor
* we need a special oob layout and handling.
@@ -1677,6 +1726,8 @@ static int nand_read_oob(struct mtd_info *mtd, loff_t from,
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: data buffer
+ *
+ * Not for syndrome calculating ecc controllers, which use a special oob layout
*/
static void nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf)
@@ -1686,6 +1737,44 @@ static void nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
+ * nand_write_page_raw_syndrome - [Intern] raw page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
+ *
+ * We need a special oob layout and handling even when ECC isn't checked.
+ */
+static void nand_write_page_raw_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf)
+{
+ int eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ uint8_t *oob = chip->oob_poi;
+ int steps, size;
+
+ for (steps = chip->ecc.steps; steps > 0; steps--) {
+ chip->write_buf(mtd, buf, eccsize);
+ buf += eccsize;
+
+ if (chip->ecc.prepad) {
+ chip->write_buf(mtd, oob, chip->ecc.prepad);
+ oob += chip->ecc.prepad;
+ }
+
+ chip->read_buf(mtd, oob, eccbytes);
+ oob += eccbytes;
+
+ if (chip->ecc.postpad) {
+ chip->write_buf(mtd, oob, chip->ecc.postpad);
+ oob += chip->ecc.postpad;
+ }
+ }
+
+ size = mtd->oobsize - (oob - chip->oob_poi);
+ if (size)
+ chip->write_buf(mtd, oob, size);
+}
+/**
* nand_write_page_swecc - [REPLACABLE] software ecc based page write function
* @mtd: mtd info structure
* @chip: nand chip info structure
@@ -2211,13 +2300,15 @@ static int nand_erase(struct mtd_info *mtd, struct erase_info *instr)
int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
int allowbbt)
{
- int page, len, status, pages_per_block, ret, chipnr;
+ int page, status, pages_per_block, ret, chipnr;
struct nand_chip *chip = mtd->priv;
- int rewrite_bbt[CONFIG_SYS_NAND_MAX_CHIPS]={0};
+ loff_t rewrite_bbt[CONFIG_SYS_NAND_MAX_CHIPS] = {0};
unsigned int bbt_masked_page = 0xffffffff;
+ loff_t len;
- MTDDEBUG (MTD_DEBUG_LEVEL3, "nand_erase: start = 0x%08x, len = %i\n",
- (unsigned int) instr->addr, (unsigned int) instr->len);
+ MTDDEBUG(MTD_DEBUG_LEVEL3, "nand_erase: start = 0x%012llx, "
+ "len = %llu\n", (unsigned long long) instr->addr,
+ (unsigned long long) instr->len);
/* Start address must align on block boundary */
if (instr->addr & ((1 << chip->phys_erase_shift) - 1)) {
@@ -2313,7 +2404,7 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
MTDDEBUG (MTD_DEBUG_LEVEL0, "nand_erase: "
"Failed erase, page 0x%08x\n", page);
instr->state = MTD_ERASE_FAILED;
- instr->fail_addr = (page << chip->page_shift);
+ instr->fail_addr = ((loff_t)page << chip->page_shift);
goto erase_exit;
}
@@ -2323,7 +2414,8 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
*/
if (bbt_masked_page != 0xffffffff &&
(page & BBT_PAGE_MASK) == bbt_masked_page)
- rewrite_bbt[chipnr] = (page << chip->page_shift);
+ rewrite_bbt[chipnr] =
+ ((loff_t)page << chip->page_shift);
/* Increment page address and decrement length */
len -= (1 << chip->phys_erase_shift);
@@ -2370,8 +2462,8 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
continue;
/* update the BBT for chip */
MTDDEBUG (MTD_DEBUG_LEVEL0, "nand_erase_nand: nand_update_bbt "
- "(%d:0x%0x 0x%0x)\n", chipnr, rewrite_bbt[chipnr],
- chip->bbt_td->pages[chipnr]);
+ "(%d:0x%0llx 0x%0x)\n", chipnr, rewrite_bbt[chipnr],
+ chip->bbt_td->pages[chipnr]);
nand_update_bbt(mtd, rewrite_bbt[chipnr]);
}
@@ -2566,7 +2658,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
if (!mtd->name)
mtd->name = type->name;
- chip->chipsize = type->chipsize << 20;
+ chip->chipsize = (uint64_t)type->chipsize << 20;
/* Newer devices have all the information in additional id bytes */
if (!type->pagesize) {
@@ -2624,7 +2716,10 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
chip->bbt_erase_shift = chip->phys_erase_shift =
ffs(mtd->erasesize) - 1;
- chip->chip_shift = ffs(chip->chipsize) - 1;
+ if (chip->chipsize & 0xffffffff)
+ chip->chip_shift = ffs((unsigned)chip->chipsize) - 1;
+ else
+ chip->chip_shift = ffs((unsigned)(chip->chipsize >> 32)) + 31;
/* Set the bad block position */
chip->badblockpos = mtd->writesize > 512 ?
@@ -2722,7 +2817,6 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips)
/**
* nand_scan_tail - [NAND Interface] Scan for the NAND device
* @mtd: MTD device structure
- * @maxchips: Number of chips to scan for
*
* This is the second phase of the normal nand_scan() function. It
* fills out all the uninitialized function pointers with the defaults
@@ -2761,7 +2855,6 @@ int nand_scan_tail(struct mtd_info *mtd)
default:
printk(KERN_WARNING "No oob scheme defined for "
"oobsize %d\n", mtd->oobsize);
-/* BUG(); */
}
}
@@ -2772,10 +2865,6 @@ int nand_scan_tail(struct mtd_info *mtd)
* check ECC mode, default to software if 3byte/512byte hardware ECC is
* selected and we have 256 byte pagesize fallback to software ECC
*/
- if (!chip->ecc.read_page_raw)
- chip->ecc.read_page_raw = nand_read_page_raw;
- if (!chip->ecc.write_page_raw)
- chip->ecc.write_page_raw = nand_write_page_raw;
switch (chip->ecc.mode) {
case NAND_ECC_HW_OOB_FIRST:
@@ -2795,6 +2884,10 @@ int nand_scan_tail(struct mtd_info *mtd)
chip->ecc.read_page = nand_read_page_hwecc;
if (!chip->ecc.write_page)
chip->ecc.write_page = nand_write_page_hwecc;
+ if (!chip->ecc.read_page_raw)
+ chip->ecc.read_page_raw = nand_read_page_raw;
+ if (!chip->ecc.write_page_raw)
+ chip->ecc.write_page_raw = nand_write_page_raw;
if (!chip->ecc.read_oob)
chip->ecc.read_oob = nand_read_oob_std;
if (!chip->ecc.write_oob)
@@ -2816,6 +2909,10 @@ int nand_scan_tail(struct mtd_info *mtd)
chip->ecc.read_page = nand_read_page_syndrome;
if (!chip->ecc.write_page)
chip->ecc.write_page = nand_write_page_syndrome;
+ if (!chip->ecc.read_page_raw)
+ chip->ecc.read_page_raw = nand_read_page_raw_syndrome;
+ if (!chip->ecc.write_page_raw)
+ chip->ecc.write_page_raw = nand_write_page_raw_syndrome;
if (!chip->ecc.read_oob)
chip->ecc.read_oob = nand_read_oob_syndrome;
if (!chip->ecc.write_oob)
@@ -2834,6 +2931,8 @@ int nand_scan_tail(struct mtd_info *mtd)
chip->ecc.read_page = nand_read_page_swecc;
chip->ecc.read_subpage = nand_read_subpage;
chip->ecc.write_page = nand_write_page_swecc;
+ chip->ecc.read_page_raw = nand_read_page_raw;
+ chip->ecc.write_page_raw = nand_write_page_raw;
chip->ecc.read_oob = nand_read_oob_std;
chip->ecc.write_oob = nand_write_oob_std;
chip->ecc.size = 256;
@@ -2846,6 +2945,8 @@ int nand_scan_tail(struct mtd_info *mtd)
chip->ecc.read_page = nand_read_page_raw;
chip->ecc.write_page = nand_write_page_raw;
chip->ecc.read_oob = nand_read_oob_std;
+ chip->ecc.read_page_raw = nand_read_page_raw;
+ chip->ecc.write_page_raw = nand_write_page_raw;
chip->ecc.write_oob = nand_write_oob_std;
chip->ecc.size = mtd->writesize;
chip->ecc.bytes = 0;
@@ -2862,7 +2963,8 @@ int nand_scan_tail(struct mtd_info *mtd)
* the out of band area
*/
chip->ecc.layout->oobavail = 0;
- for (i = 0; chip->ecc.layout->oobfree[i].length; i++)
+ for (i = 0; chip->ecc.layout->oobfree[i].length
+ && i < ARRAY_SIZE(chip->ecc.layout->oobfree); i++)
chip->ecc.layout->oobavail +=
chip->ecc.layout->oobfree[i].length;
mtd->oobavail = chip->ecc.layout->oobavail;
@@ -2890,6 +2992,7 @@ int nand_scan_tail(struct mtd_info *mtd)
break;
case 4:
case 8:
+ case 16:
mtd->subpage_sft = 2;
break;
}
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index d68a315f..2fe68ab 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -182,16 +182,19 @@ static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num,
if (tmp == msk)
continue;
if (reserved_block_code && (tmp == reserved_block_code)) {
- printk(KERN_DEBUG "nand_read_bbt: Reserved block at 0x%08x\n",
- ((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
+ printk(KERN_DEBUG "nand_read_bbt: Reserved block at 0x%012llx\n",
+ (loff_t)((offs << 2) +
+ (act >> 1)) <<
+ this->bbt_erase_shift);
this->bbt[offs + (act >> 3)] |= 0x2 << (act & 0x06);
mtd->ecc_stats.bbtblocks++;
continue;
}
/* Leave it for now, if its matured we can move this
* message to MTD_DEBUG_LEVEL0 */
- printk(KERN_DEBUG "nand_read_bbt: Bad block at 0x%08x\n",
- ((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
+ printk(KERN_DEBUG "nand_read_bbt: Bad block at 0x%012llx\n",
+ (loff_t)((offs << 2) + (act >> 1)) <<
+ this->bbt_erase_shift);
/* Factory marked bad or worn out ? */
if (tmp == 0)
this->bbt[offs + (act >> 3)] |= 0x3 << (act & 0x06);
@@ -295,8 +298,8 @@ static int read_abs_bbts(struct mtd_info *mtd, uint8_t *buf,
/* Read the primary version, if available */
if (td->options & NAND_BBT_VERSION) {
- scan_read_raw(mtd, buf, td->pages[0] << this->page_shift,
- mtd->writesize);
+ scan_read_raw(mtd, buf, (loff_t)td->pages[0] <<
+ this->page_shift, mtd->writesize);
td->version[0] = buf[mtd->writesize + td->veroffs];
printk(KERN_DEBUG "Bad block table at page %d, version 0x%02X\n",
td->pages[0], td->version[0]);
@@ -304,8 +307,8 @@ static int read_abs_bbts(struct mtd_info *mtd, uint8_t *buf,
/* Read the mirror version, if available */
if (md && (md->options & NAND_BBT_VERSION)) {
- scan_read_raw(mtd, buf, md->pages[0] << this->page_shift,
- mtd->writesize);
+ scan_read_raw(mtd, buf, (loff_t)md->pages[0] <<
+ this->page_shift, mtd->writesize);
md->version[0] = buf[mtd->writesize + md->veroffs];
printk(KERN_DEBUG "Bad block table at page %d, version 0x%02X\n",
md->pages[0], md->version[0]);
@@ -422,7 +425,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
numblocks = this->chipsize >> (this->bbt_erase_shift - 1);
startblock = chip * numblocks;
numblocks += startblock;
- from = startblock << (this->bbt_erase_shift - 1);
+ from = (loff_t)startblock << (this->bbt_erase_shift - 1);
}
for (i = startblock; i < numblocks;) {
@@ -440,8 +443,8 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
if (ret) {
this->bbt[i >> 3] |= 0x03 << (i & 0x6);
MTDDEBUG (MTD_DEBUG_LEVEL0,
- "Bad eraseblock %d at 0x%08x\n",
- i >> 1, (unsigned int)from);
+ "Bad eraseblock %d at 0x%012llx\n",
+ i >> 1, (unsigned long long)from);
mtd->ecc_stats.badblocks++;
}
@@ -507,7 +510,7 @@ static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
for (block = 0; block < td->maxblocks; block++) {
int actblock = startblock + dir * block;
- loff_t offs = actblock << this->bbt_erase_shift;
+ loff_t offs = (loff_t)actblock << this->bbt_erase_shift;
/* Read first page */
scan_read_raw(mtd, buf, offs, mtd->writesize);
@@ -731,7 +734,7 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
memset(&einfo, 0, sizeof(einfo));
einfo.mtd = mtd;
- einfo.addr = (unsigned long)to;
+ einfo.addr = to;
einfo.len = 1 << this->bbt_erase_shift;
res = nand_erase_nand(mtd, &einfo, 1);
if (res < 0)
@@ -741,8 +744,9 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
if (res < 0)
goto outerr;
- printk(KERN_DEBUG "Bad block table written to 0x%08x, version "
- "0x%02X\n", (unsigned int)to, td->version[chip]);
+ printk(KERN_DEBUG "Bad block table written to 0x%012llx, "
+ "version 0x%02X\n", (unsigned long long)to,
+ td->version[chip]);
/* Mark it as used */
td->pages[chip] = page;
@@ -922,7 +926,8 @@ static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td)
newval = oldval | (0x2 << (block & 0x06));
this->bbt[(block >> 3)] = newval;
if ((oldval != newval) && td->reserved_block_code)
- nand_update_bbt(mtd, block << (this->bbt_erase_shift - 1));
+ nand_update_bbt(mtd, (loff_t)block <<
+ (this->bbt_erase_shift - 1));
continue;
}
update = 0;
@@ -943,7 +948,8 @@ static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td)
new ones have been marked, then we need to update the stored
bbts. This should only happen once. */
if (update && td->reserved_block_code)
- nand_update_bbt(mtd, (block - 2) << (this->bbt_erase_shift - 1));
+ nand_update_bbt(mtd, (loff_t)(block - 2) <<
+ (this->bbt_erase_shift - 1));
}
}
@@ -1039,7 +1045,6 @@ int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
if (!this->bbt || !td)
return -EINVAL;
- len = mtd->size >> (this->bbt_erase_shift + 2);
/* Allocate a temporary buffer for one eraseblock incl. oob */
len = (1 << this->bbt_erase_shift);
len += (len >> this->page_shift) * mtd->oobsize;
diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c
index 61bf7e6..29c42f7 100644
--- a/drivers/mtd/nand/nand_util.c
+++ b/drivers/mtd/nand/nand_util.c
@@ -41,10 +41,6 @@
#include <nand.h>
#include <jffs2/jffs2.h>
-#if !defined(CONFIG_SYS_64BIT_VSPRINTF)
-#warning Please define CONFIG_SYS_64BIT_VSPRINTF for correct output!
-#endif
-
typedef struct erase_info erase_info_t;
typedef struct mtd_info mtd_info_t;
diff --git a/drivers/mtd/nand/s3c2410_nand.c b/drivers/mtd/nand/s3c2410_nand.c
index f2f3e72..a27d47e 100644
--- a/drivers/mtd/nand/s3c2410_nand.c
+++ b/drivers/mtd/nand/s3c2410_nand.c
@@ -21,7 +21,7 @@
#include <common.h>
#include <nand.h>
-#include <s3c2410.h>
+#include <asm/arch/s3c24x0_cpu.h>
#include <asm/io.h>
#define S3C2410_NFCONF_EN (1<<15)
@@ -36,6 +36,21 @@
#define S3C2410_ADDR_NALE 4
#define S3C2410_ADDR_NCLE 8
+#ifdef CONFIG_NAND_SPL
+
+/* in the early stage of NAND flash booting, printf() is not available */
+#define printf(fmt, args...)
+
+static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ int i;
+ struct nand_chip *this = mtd->priv;
+
+ for (i = 0; i < len; i++)
+ buf[i] = readb(this->IO_ADDR_R);
+}
+#endif
+
static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *chip = mtd->priv;
@@ -83,9 +98,10 @@ void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode)
static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
u_char *ecc_code)
{
- ecc_code[0] = NFECC0;
- ecc_code[1] = NFECC1;
- ecc_code[2] = NFECC2;
+ struct s3c2410_nand *nand = s3c2410_get_base_nand();
+ ecc_code[0] = readb(&nand->NFECC);
+ ecc_code[1] = readb(&nand->NFECC + 1);
+ ecc_code[2] = readb(&nand->NFECC + 2);
debugX(1, "s3c2410_nand_calculate_hwecc(%p,): 0x%02x 0x%02x 0x%02x\n",
mtd , ecc_code[0], ecc_code[1], ecc_code[2]);
@@ -130,8 +146,13 @@ int board_nand_init(struct nand_chip *nand)
/* initialize nand_chip data structure */
nand->IO_ADDR_R = nand->IO_ADDR_W = (void *)&nand_reg->NFDATA;
+ nand->select_chip = NULL;
+
/* read_buf and write_buf are default */
/* read_byte and write_byte are default */
+#ifdef CONFIG_NAND_SPL
+ nand->read_buf = nand_read_buf;
+#endif
/* hwcontrol always must be implemented */
nand->cmd_ctrl = s3c2410_hwcontrol;
@@ -142,7 +163,9 @@ int board_nand_init(struct nand_chip *nand)
nand->ecc.hwctl = s3c2410_nand_enable_hwecc;
nand->ecc.calculate = s3c2410_nand_calculate_ecc;
nand->ecc.correct = s3c2410_nand_correct_data;
- nand->ecc.mode = NAND_ECC_HW3_512;
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE;
+ nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES;
#else
nand->ecc.mode = NAND_ECC_SOFT;
#endif
diff --git a/drivers/mtd/nand/s3c64xx.c b/drivers/mtd/nand/s3c64xx.c
index edaf55a..084e475 100644
--- a/drivers/mtd/nand/s3c64xx.c
+++ b/drivers/mtd/nand/s3c64xx.c
@@ -28,7 +28,7 @@
#include <common.h>
#include <nand.h>
-#include <s3c6400.h>
+#include <asm/arch/s3c6400.h>
#include <asm/io.h>
#include <asm/errno.h>
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 368fa6e..f9273ab 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -9,6 +9,11 @@
* auto-placement support, read-while load support, various fixes
* Copyright (C) Nokia Corporation, 2007
*
+ * Rohit Hagargundgi <h.rohit at samsung.com>,
+ * Amul Kumar Saha <amul.saha@samsung.com>:
+ * Flex-OneNAND support
+ * Copyright (C) Samsung Electronics, 2009
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -24,7 +29,7 @@
#include <malloc.h>
/* It should access 16-bit instead of 8-bit */
-static inline void *memcpy_16(void *dst, const void *src, unsigned int len)
+static void *memcpy_16(void *dst, const void *src, unsigned int len)
{
void *ret = dst;
short *d = dst;
@@ -37,6 +42,27 @@ static inline void *memcpy_16(void *dst, const void *src, unsigned int len)
}
/**
+ * onenand_oob_128 - oob info for Flex-Onenand with 4KB page
+ * For now, we expose only 64 out of 80 ecc bytes
+ */
+static struct nand_ecclayout onenand_oob_128 = {
+ .eccbytes = 64,
+ .eccpos = {
+ 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
+ 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+ 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
+ 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,
+ 70, 71, 72, 73, 74, 75, 76, 77, 78, 79,
+ 86, 87, 88, 89, 90, 91, 92, 93, 94, 95,
+ 102, 103, 104, 105
+ },
+ .oobfree = {
+ {2, 4}, {18, 4}, {34, 4}, {50, 4},
+ {66, 4}, {82, 4}, {98, 4}, {114, 4}
+ }
+};
+
+/**
* onenand_oob_64 - oob info for large (2KB) page
*/
static struct nand_ecclayout onenand_oob_64 = {
@@ -74,6 +100,14 @@ static const unsigned char ffchars[] = {
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 48 */
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 64 */
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 80 */
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 96 */
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 112 */
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 128 */
};
/**
@@ -180,6 +214,85 @@ static int onenand_buffer_address(int dataram1, int sectors, int count)
}
/**
+ * flexonenand_block - Return block number for flash address
+ * @param this - OneNAND device structure
+ * @param addr - Address for which block number is needed
+ */
+static unsigned int flexonenand_block(struct onenand_chip *this, loff_t addr)
+{
+ unsigned int boundary, blk, die = 0;
+
+ if (ONENAND_IS_DDP(this) && addr >= this->diesize[0]) {
+ die = 1;
+ addr -= this->diesize[0];
+ }
+
+ boundary = this->boundary[die];
+
+ blk = addr >> (this->erase_shift - 1);
+ if (blk > boundary)
+ blk = (blk + boundary + 1) >> 1;
+
+ blk += die ? this->density_mask : 0;
+ return blk;
+}
+
+unsigned int onenand_block(struct onenand_chip *this, loff_t addr)
+{
+ if (!FLEXONENAND(this))
+ return addr >> this->erase_shift;
+ return flexonenand_block(this, addr);
+}
+
+/**
+ * flexonenand_addr - Return address of the block
+ * @this: OneNAND device structure
+ * @block: Block number on Flex-OneNAND
+ *
+ * Return address of the block
+ */
+static loff_t flexonenand_addr(struct onenand_chip *this, int block)
+{
+ loff_t ofs = 0;
+ int die = 0, boundary;
+
+ if (ONENAND_IS_DDP(this) && block >= this->density_mask) {
+ block -= this->density_mask;
+ die = 1;
+ ofs = this->diesize[0];
+ }
+
+ boundary = this->boundary[die];
+ ofs += (loff_t) block << (this->erase_shift - 1);
+ if (block > (boundary + 1))
+ ofs += (loff_t) (block - boundary - 1)
+ << (this->erase_shift - 1);
+ return ofs;
+}
+
+loff_t onenand_addr(struct onenand_chip *this, int block)
+{
+ if (!FLEXONENAND(this))
+ return (loff_t) block << this->erase_shift;
+ return flexonenand_addr(this, block);
+}
+
+/**
+ * flexonenand_region - [Flex-OneNAND] Return erase region of addr
+ * @param mtd MTD device structure
+ * @param addr address whose erase region needs to be identified
+ */
+int flexonenand_region(struct mtd_info *mtd, loff_t addr)
+{
+ int i;
+
+ for (i = 0; i < mtd->numeraseregions; i++)
+ if (addr < mtd->eraseregions[i].offset)
+ break;
+ return i - 1;
+}
+
+/**
* onenand_get_density - [DEFAULT] Get OneNAND density
* @param dev_id OneNAND device ID
*
@@ -205,10 +318,11 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr,
size_t len)
{
struct onenand_chip *this = mtd->priv;
- int value, readcmd = 0;
+ int value;
int block, page;
+
/* Now we use page size operation */
- int sectors = 4, count = 4;
+ int sectors = 0, count = 0;
/* Address translation */
switch (cmd) {
@@ -220,15 +334,28 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr,
page = -1;
break;
+ case FLEXONENAND_CMD_PI_ACCESS:
+ /* addr contains die index */
+ block = addr * this->density_mask;
+ page = -1;
+ break;
+
case ONENAND_CMD_ERASE:
case ONENAND_CMD_BUFFERRAM:
- block = (int)(addr >> this->erase_shift);
+ block = onenand_block(this, addr);
page = -1;
break;
+ case FLEXONENAND_CMD_READ_PI:
+ cmd = ONENAND_CMD_READ;
+ block = addr * this->density_mask;
+ page = 0;
+ break;
+
default:
- block = (int)(addr >> this->erase_shift);
- page = (int)(addr >> this->page_shift);
+ block = onenand_block(this, addr);
+ page = (int) (addr
+ - onenand_addr(this, block)) >> this->page_shift;
page &= this->page_mask;
break;
}
@@ -240,8 +367,11 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr,
this->write_word(value,
this->base + ONENAND_REG_START_ADDRESS2);
- /* Switch to the next data buffer */
- ONENAND_SET_NEXT_BUFFERRAM(this);
+ if (ONENAND_IS_MLC(this))
+ ONENAND_SET_BUFFERRAM0(this);
+ else
+ /* Switch to the next data buffer */
+ ONENAND_SET_NEXT_BUFFERRAM(this);
return 0;
}
@@ -252,7 +382,7 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr,
this->write_word(value,
this->base + ONENAND_REG_START_ADDRESS1);
- /* Write 'DFS, FBA' of Flash */
+ /* Select DataRAM for DDP */
value = onenand_bufferram_address(this, block);
this->write_word(value,
this->base + ONENAND_REG_START_ADDRESS2);
@@ -262,10 +392,14 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr,
int dataram;
switch (cmd) {
+ case FLEXONENAND_CMD_RECOVER_LSB:
case ONENAND_CMD_READ:
case ONENAND_CMD_READOOB:
- dataram = ONENAND_SET_NEXT_BUFFERRAM(this);
- readcmd = 1;
+ if (ONENAND_IS_MLC(this))
+ dataram = ONENAND_SET_BUFFERRAM0(this);
+ else
+ dataram = ONENAND_SET_NEXT_BUFFERRAM(this);
+
break;
default:
@@ -292,6 +426,29 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr,
}
/**
+ * onenand_read_ecc - return ecc status
+ * @param this onenand chip structure
+ */
+static int onenand_read_ecc(struct onenand_chip *this)
+{
+ int ecc, i;
+
+ if (!FLEXONENAND(this))
+ return this->read_word(this->base + ONENAND_REG_ECC_STATUS);
+
+ for (i = 0; i < 4; i++) {
+ ecc = this->read_word(this->base
+ + ((ONENAND_REG_ECC_STATUS + i) << 1));
+ if (likely(!ecc))
+ continue;
+ if (ecc & FLEXONENAND_UNCORRECTABLE_ERROR)
+ return ONENAND_ECC_2BIT_ALL;
+ }
+
+ return 0;
+}
+
+/**
* onenand_wait - [DEFAULT] wait until the command is done
* @param mtd MTD device structure
* @param state state to select the max. timeout value
@@ -305,7 +462,7 @@ static int onenand_wait(struct mtd_info *mtd, int state)
struct onenand_chip *this = mtd->priv;
unsigned int flags = ONENAND_INT_MASTER;
unsigned int interrupt = 0;
- unsigned int ctrl, ecc;
+ unsigned int ctrl;
while (1) {
interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
@@ -315,6 +472,14 @@ static int onenand_wait(struct mtd_info *mtd, int state)
ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
+ if (interrupt & ONENAND_INT_READ) {
+ int ecc = onenand_read_ecc(this);
+ if (ecc & ONENAND_ECC_2BIT_ALL) {
+ printk("onenand_wait: ECC error = 0x%04x\n", ecc);
+ return -EBADMSG;
+ }
+ }
+
if (ctrl & ONENAND_CTRL_ERROR) {
printk("onenand_wait: controller error = 0x%04x\n", ctrl);
if (ctrl & ONENAND_CTRL_LOCK)
@@ -324,14 +489,6 @@ static int onenand_wait(struct mtd_info *mtd, int state)
return -EIO;
}
- if (interrupt & ONENAND_INT_READ) {
- ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS);
- if (ecc & ONENAND_ECC_2BIT_ALL) {
- MTDDEBUG (MTD_DEBUG_LEVEL0,
- "onenand_wait: ECC error = 0x%04x\n", ecc);
- return -EBADMSG;
- }
- }
return 0;
}
@@ -499,7 +656,7 @@ static int onenand_check_bufferram(struct mtd_info *mtd, loff_t addr)
if (found && ONENAND_IS_DDP(this)) {
/* Select DataRAM for DDP */
- int block = (int) (addr >> this->erase_shift);
+ int block = onenand_block(this, addr);
int value = onenand_bufferram_address(this, block);
this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
}
@@ -632,6 +789,45 @@ static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf,
}
/**
+ * onenand_recover_lsb - [Flex-OneNAND] Recover LSB page data
+ * @param mtd MTD device structure
+ * @param addr address to recover
+ * @param status return value from onenand_wait
+ *
+ * MLC NAND Flash cell has paired pages - LSB page and MSB page. LSB page has
+ * lower page address and MSB page has higher page address in paired pages.
+ * If power off occurs during MSB page program, the paired LSB page data can
+ * become corrupt. LSB page recovery read is a way to read LSB page though page
+ * data are corrupted. When uncorrectable error occurs as a result of LSB page
+ * read after power up, issue LSB page recovery read.
+ */
+static int onenand_recover_lsb(struct mtd_info *mtd, loff_t addr, int status)
+{
+ struct onenand_chip *this = mtd->priv;
+ int i;
+
+ /* Recovery is only for Flex-OneNAND */
+ if (!FLEXONENAND(this))
+ return status;
+
+ /* check if we failed due to uncorrectable error */
+ if (status != -EBADMSG && status != ONENAND_BBT_READ_ECC_ERROR)
+ return status;
+
+ /* check if address lies in MLC region */
+ i = flexonenand_region(mtd, addr);
+ if (mtd->eraseregions[i].erasesize < (1 << this->erase_shift))
+ return status;
+
+ printk("onenand_recover_lsb:"
+ "Attempting to recover from uncorrectable read\n");
+
+ /* Issue the LSB page recovery command */
+ this->command(mtd, FLEXONENAND_CMD_RECOVER_LSB, addr, this->writesize);
+ return this->wait(mtd, FL_READING);
+}
+
+/**
* onenand_read_ops_nolock - [OneNAND Interface] OneNAND read main and/or out-of-band
* @param mtd MTD device structure
* @param from offset to read from
@@ -673,6 +869,7 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
stats = mtd->ecc_stats;
/* Read-while-load method */
+ /* Note: We can't use this feature in MLC */
/* Do first load to bufferRAM */
if (read < len) {
@@ -680,6 +877,8 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
this->main_buf = buf;
this->command(mtd, ONENAND_CMD_READ, from, writesize);
ret = this->wait(mtd, FL_READING);
+ if (unlikely(ret))
+ ret = onenand_recover_lsb(mtd, from, ret);
onenand_update_bufferram(mtd, from, !ret);
if (ret == -EBADMSG)
ret = 0;
@@ -694,7 +893,7 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
while (!ret) {
/* If there is more to load then start next load */
from += thislen;
- if (read + thislen < len) {
+ if (!ONENAND_IS_MLC(this) && read + thislen < len) {
this->main_buf = buf + thislen;
this->command(mtd, ONENAND_CMD_READ, from, writesize);
/*
@@ -728,6 +927,16 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
oobcolumn = 0;
}
+ if (ONENAND_IS_MLC(this) && (read + thislen < len)) {
+ this->command(mtd, ONENAND_CMD_READ, from, writesize);
+ ret = this->wait(mtd, FL_READING);
+ if (unlikely(ret))
+ ret = onenand_recover_lsb(mtd, from, ret);
+ onenand_update_bufferram(mtd, from, !ret);
+ if (ret == -EBADMSG)
+ ret = 0;
+ }
+
/* See if we are done */
read += thislen;
if (read == len)
@@ -735,16 +944,19 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
/* Set up for next read from bufferRAM */
if (unlikely(boundary))
this->write_word(ONENAND_DDP_CHIP1, this->base + ONENAND_REG_START_ADDRESS2);
- ONENAND_SET_NEXT_BUFFERRAM(this);
+ if (!ONENAND_IS_MLC(this))
+ ONENAND_SET_NEXT_BUFFERRAM(this);
buf += thislen;
thislen = min_t(int, writesize, len - read);
column = 0;
- /* Now wait for load */
- ret = this->wait(mtd, FL_READING);
- onenand_update_bufferram(mtd, from, !ret);
- if (ret == -EBADMSG)
- ret = 0;
+ if (!ONENAND_IS_MLC(this)) {
+ /* Now wait for load */
+ ret = this->wait(mtd, FL_READING);
+ onenand_update_bufferram(mtd, from, !ret);
+ if (ret == -EBADMSG)
+ ret = 0;
+ }
}
/*
@@ -781,7 +993,7 @@ static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from,
size_t len = ops->ooblen;
mtd_oob_mode_t mode = ops->mode;
u_char *buf = ops->oobbuf;
- int ret = 0;
+ int ret = 0, readcmd;
from += ops->ooboffs;
@@ -812,16 +1024,21 @@ static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from,
stats = mtd->ecc_stats;
+ readcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB;
+
while (read < len) {
thislen = oobsize - column;
thislen = min_t(int, thislen, len);
this->spare_buf = buf;
- this->command(mtd, ONENAND_CMD_READOOB, from, mtd->oobsize);
+ this->command(mtd, readcmd, from, mtd->oobsize);
onenand_update_bufferram(mtd, from, 0);
ret = this->wait(mtd, FL_READING);
+ if (unlikely(ret))
+ ret = onenand_recover_lsb(mtd, from, ret);
+
if (ret && ret != -EBADMSG) {
printk(KERN_ERR "onenand_read_oob_nolock: read failed = 0x%x\n", ret);
break;
@@ -945,9 +1162,12 @@ static int onenand_bbt_wait(struct mtd_info *mtd, int state)
ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
if (interrupt & ONENAND_INT_READ) {
- int ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS);
- if (ecc & ONENAND_ECC_2BIT_ALL)
+ int ecc = onenand_read_ecc(this);
+ if (ecc & ONENAND_ECC_2BIT_ALL) {
+ printk(KERN_INFO "onenand_bbt_wait: ecc error = 0x%04x"
+ ", controller = 0x%04x\n", ecc, ctrl);
return ONENAND_BBT_READ_ERROR;
+ }
} else {
printk(KERN_ERR "onenand_bbt_wait: read timeout!"
"ctrl=0x%04x intr=0x%04x\n", ctrl, interrupt);
@@ -976,12 +1196,14 @@ int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
{
struct onenand_chip *this = mtd->priv;
int read = 0, thislen, column;
- int ret = 0;
+ int ret = 0, readcmd;
size_t len = ops->ooblen;
u_char *buf = ops->oobbuf;
MTDDEBUG(MTD_DEBUG_LEVEL3, "onenand_bbt_read_oob: from = 0x%08x, len = %zi\n", (unsigned int) from, len);
+ readcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB;
+
/* Initialize return value */
ops->oobretlen = 0;
@@ -1002,11 +1224,14 @@ int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
thislen = min_t(int, thislen, len);
this->spare_buf = buf;
- this->command(mtd, ONENAND_CMD_READOOB, from, mtd->oobsize);
+ this->command(mtd, readcmd, from, mtd->oobsize);
onenand_update_bufferram(mtd, from, 0);
ret = this->bbt_wait(mtd, FL_READING);
+ if (unlikely(ret))
+ ret = onenand_recover_lsb(mtd, from, ret);
+
if (ret)
break;
@@ -1044,9 +1269,11 @@ static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to
{
struct onenand_chip *this = mtd->priv;
u_char *oob_buf = this->oob_buf;
- int status, i;
+ int status, i, readcmd;
- this->command(mtd, ONENAND_CMD_READOOB, to, mtd->oobsize);
+ readcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB;
+
+ this->command(mtd, readcmd, to, mtd->oobsize);
onenand_update_bufferram(mtd, to, 0);
status = this->wait(mtd, FL_READING);
if (status)
@@ -1291,7 +1518,7 @@ static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to,
{
struct onenand_chip *this = mtd->priv;
int column, ret = 0, oobsize;
- int written = 0;
+ int written = 0, oobcmd;
u_char *oobbuf;
size_t len = ops->ooblen;
const u_char *buf = ops->oobbuf;
@@ -1333,6 +1560,8 @@ static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to,
oobbuf = this->oob_buf;
+ oobcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_PROG : ONENAND_CMD_PROGOOB;
+
/* Loop until all data write */
while (written < len) {
int thislen = min_t(int, oobsize, len - written);
@@ -1348,7 +1577,14 @@ static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to,
memcpy(oobbuf + column, buf, thislen);
this->write_bufferram(mtd, 0, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize);
- this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize);
+ if (ONENAND_IS_MLC(this)) {
+ /* Set main area of DataRAM to 0xff*/
+ memset(this->page_buf, 0xff, mtd->writesize);
+ this->write_bufferram(mtd, 0, ONENAND_DATARAM,
+ this->page_buf, 0, mtd->writesize);
+ }
+
+ this->command(mtd, oobcmd, to, mtd->oobsize);
onenand_update_bufferram(mtd, to, 0);
if (ONENAND_IS_2PLANE(this)) {
@@ -1475,34 +1711,54 @@ int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
{
struct onenand_chip *this = mtd->priv;
unsigned int block_size;
- loff_t addr;
- int len;
- int ret = 0;
-
- MTDDEBUG (MTD_DEBUG_LEVEL3,
- "onenand_erase: start = 0x%08x, len = %i\n",
- (unsigned int)instr->addr, (unsigned int)instr->len);
+ loff_t addr = instr->addr;
+ unsigned int len = instr->len;
+ int ret = 0, i;
+ struct mtd_erase_region_info *region = NULL;
+ unsigned int region_end = 0;
- block_size = (1 << this->erase_shift);
+ MTDDEBUG(MTD_DEBUG_LEVEL3, "onenand_erase: start = 0x%08x, len = %i\n",
+ (unsigned int) addr, len);
- /* Start address must align on block boundary */
- if (unlikely(instr->addr & (block_size - 1))) {
- MTDDEBUG (MTD_DEBUG_LEVEL0,
- "onenand_erase: Unaligned address\n");
+ /* Do not allow erase past end of device */
+ if (unlikely((len + addr) > mtd->size)) {
+ MTDDEBUG(MTD_DEBUG_LEVEL0, "onenand_erase:"
+ "Erase past end of device\n");
return -EINVAL;
}
- /* Length must align on block boundary */
- if (unlikely(instr->len & (block_size - 1))) {
- MTDDEBUG (MTD_DEBUG_LEVEL0,
- "onenand_erase: Length not block aligned\n");
- return -EINVAL;
+ if (FLEXONENAND(this)) {
+ /* Find the eraseregion of this address */
+ i = flexonenand_region(mtd, addr);
+ region = &mtd->eraseregions[i];
+
+ block_size = region->erasesize;
+ region_end = region->offset
+ + region->erasesize * region->numblocks;
+
+ /* Start address within region must align on block boundary.
+ * Erase region's start offset is always block start address.
+ */
+ if (unlikely((addr - region->offset) & (block_size - 1))) {
+ MTDDEBUG(MTD_DEBUG_LEVEL0, "onenand_erase:"
+ " Unaligned address\n");
+ return -EINVAL;
+ }
+ } else {
+ block_size = 1 << this->erase_shift;
+
+ /* Start address must align on block boundary */
+ if (unlikely(addr & (block_size - 1))) {
+ MTDDEBUG(MTD_DEBUG_LEVEL0, "onenand_erase:"
+ "Unaligned address\n");
+ return -EINVAL;
+ }
}
- /* Do not allow erase past end of device */
- if (unlikely((instr->len + instr->addr) > mtd->size)) {
+ /* Length must align on block boundary */
+ if (unlikely(len & (block_size - 1))) {
MTDDEBUG (MTD_DEBUG_LEVEL0,
- "onenand_erase: Erase past end of device\n");
+ "onenand_erase: Length not block aligned\n");
return -EINVAL;
}
@@ -1512,9 +1768,6 @@ int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
onenand_get_device(mtd, FL_ERASING);
/* Loop throught the pages */
- len = instr->len;
- addr = instr->addr;
-
instr->state = MTD_ERASING;
while (len) {
@@ -1541,14 +1794,7 @@ int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
else
MTDDEBUG (MTD_DEBUG_LEVEL0, "onenand_erase: "
"Failed erase, block %d\n",
- (unsigned)(addr >> this->erase_shift));
- if (ret == -EPERM)
- printk("onenand_erase: "
- "Device is write protected!!!\n");
- else
- printk("onenand_erase: "
- "Failed erase, block %d\n",
- (unsigned)(addr >> this->erase_shift));
+ onenand_block(this, addr));
instr->state = MTD_ERASE_FAILED;
instr->fail_addr = addr;
@@ -1557,6 +1803,23 @@ int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
len -= block_size;
addr += block_size;
+
+ if (addr == region_end) {
+ if (!len)
+ break;
+ region++;
+
+ block_size = region->erasesize;
+ region_end = region->offset
+ + region->erasesize * region->numblocks;
+
+ if (len & (block_size - 1)) {
+ /* This has been checked at MTD
+ * partitioning level. */
+ printk("onenand_erase: Unaligned address\n");
+ goto erase_exit;
+ }
+ }
}
instr->state = MTD_ERASE_DONE;
@@ -1634,7 +1897,7 @@ static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
int block;
/* Get block number */
- block = ((int) ofs) >> bbm->bbt_erase_shift;
+ block = onenand_block(this, ofs);
if (bbm->bbt)
bbm->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
@@ -1682,8 +1945,8 @@ static int onenand_do_lock_cmd(struct mtd_info *mtd, loff_t ofs, size_t len, int
int start, end, block, value, status;
int wp_status_mask;
- start = ofs >> this->erase_shift;
- end = len >> this->erase_shift;
+ start = onenand_block(this, ofs);
+ end = onenand_block(this, ofs + len);
if (cmd == ONENAND_CMD_LOCK)
wp_status_mask = ONENAND_WP_LS;
@@ -1718,7 +1981,7 @@ static int onenand_do_lock_cmd(struct mtd_info *mtd, loff_t ofs, size_t len, int
}
/* Block lock scheme */
- for (block = start; block < start + end; block++) {
+ for (block = start; block < end; block++) {
/* Set block address */
value = onenand_block_address(this, block);
this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1);
@@ -1831,7 +2094,7 @@ static void onenand_unlock_all(struct mtd_info *mtd)
{
struct onenand_chip *this = mtd->priv;
loff_t ofs = 0;
- size_t len = this->chipsize;
+ size_t len = mtd->size;
if (this->options & ONENAND_HAS_UNLOCK_ALL) {
/* Set start block address */
@@ -1847,14 +2110,12 @@ static void onenand_unlock_all(struct mtd_info *mtd)
& ONENAND_CTRL_ONGO)
continue;
- return;
-
/* Check lock status */
if (onenand_check_lock_status(this))
return;
/* Workaround for all block unlock in DDP */
- if (ONENAND_IS_DDP(this)) {
+ if (ONENAND_IS_DDP(this) && !FLEXONENAND(this)) {
/* All blocks on another chip */
ofs = this->chipsize >> 1;
len = this->chipsize >> 1;
@@ -1906,6 +2167,14 @@ static void onenand_check_features(struct mtd_info *mtd)
break;
}
+ if (ONENAND_IS_MLC(this))
+ this->options &= ~ONENAND_HAS_2PLANE;
+
+ if (FLEXONENAND(this)) {
+ this->options &= ~ONENAND_HAS_CONT_LOCK;
+ this->options |= ONENAND_HAS_UNLOCK_ALL;
+ }
+
if (this->options & ONENAND_HAS_CONT_LOCK)
printk(KERN_DEBUG "Lock scheme is Continuous Lock\n");
if (this->options & ONENAND_HAS_UNLOCK_ALL)
@@ -1922,16 +2191,18 @@ static void onenand_check_features(struct mtd_info *mtd)
*/
char *onenand_print_device_info(int device, int version)
{
- int vcc, demuxed, ddp, density;
+ int vcc, demuxed, ddp, density, flexonenand;
char *dev_info = malloc(80);
char *p = dev_info;
vcc = device & ONENAND_DEVICE_VCC_MASK;
demuxed = device & ONENAND_DEVICE_IS_DEMUX;
ddp = device & ONENAND_DEVICE_IS_DDP;
- density = device >> ONENAND_DEVICE_DENSITY_SHIFT;
- p += sprintf(dev_info, "%sOneNAND%s %dMB %sV 16-bit (0x%02x)",
+ density = onenand_get_density(device);
+ flexonenand = device & DEVICE_IS_FLEXONENAND;
+ p += sprintf(dev_info, "%s%sOneNAND%s %dMB %sV 16-bit (0x%02x)",
demuxed ? "" : "Muxed ",
+ flexonenand ? "Flex-" : "",
ddp ? "(DDP)" : "",
(16 << density), vcc ? "2.65/3.3" : "1.8", device);
@@ -1957,7 +2228,7 @@ static int onenand_check_maf(int manuf)
char *name;
int i;
- for (i = 0; size; i++)
+ for (i = 0; i < size; i++)
if (manuf == onenand_manuf_ids[i].id)
break;
@@ -1974,6 +2245,265 @@ static int onenand_check_maf(int manuf)
}
/**
+* flexonenand_get_boundary - Reads the SLC boundary
+* @param onenand_info - onenand info structure
+*
+* Fill up boundary[] field in onenand_chip
+**/
+static int flexonenand_get_boundary(struct mtd_info *mtd)
+{
+ struct onenand_chip *this = mtd->priv;
+ unsigned int die, bdry;
+ int ret, syscfg, locked;
+
+ /* Disable ECC */
+ syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1);
+ this->write_word((syscfg | 0x0100), this->base + ONENAND_REG_SYS_CFG1);
+
+ for (die = 0; die < this->dies; die++) {
+ this->command(mtd, FLEXONENAND_CMD_PI_ACCESS, die, 0);
+ this->wait(mtd, FL_SYNCING);
+
+ this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0);
+ ret = this->wait(mtd, FL_READING);
+
+ bdry = this->read_word(this->base + ONENAND_DATARAM);
+ if ((bdry >> FLEXONENAND_PI_UNLOCK_SHIFT) == 3)
+ locked = 0;
+ else
+ locked = 1;
+ this->boundary[die] = bdry & FLEXONENAND_PI_MASK;
+
+ this->command(mtd, ONENAND_CMD_RESET, 0, 0);
+ ret = this->wait(mtd, FL_RESETING);
+
+ printk(KERN_INFO "Die %d boundary: %d%s\n", die,
+ this->boundary[die], locked ? "(Locked)" : "(Unlocked)");
+ }
+
+ /* Enable ECC */
+ this->write_word(syscfg, this->base + ONENAND_REG_SYS_CFG1);
+ return 0;
+}
+
+/**
+ * flexonenand_get_size - Fill up fields in onenand_chip and mtd_info
+ * boundary[], diesize[], mtd->size, mtd->erasesize,
+ * mtd->eraseregions
+ * @param mtd - MTD device structure
+ */
+static void flexonenand_get_size(struct mtd_info *mtd)
+{
+ struct onenand_chip *this = mtd->priv;
+ int die, i, eraseshift, density;
+ int blksperdie, maxbdry;
+ loff_t ofs;
+
+ density = onenand_get_density(this->device_id);
+ blksperdie = ((loff_t)(16 << density) << 20) >> (this->erase_shift);
+ blksperdie >>= ONENAND_IS_DDP(this) ? 1 : 0;
+ maxbdry = blksperdie - 1;
+ eraseshift = this->erase_shift - 1;
+
+ mtd->numeraseregions = this->dies << 1;
+
+ /* This fills up the device boundary */
+ flexonenand_get_boundary(mtd);
+ die = 0;
+ ofs = 0;
+ i = -1;
+ for (; die < this->dies; die++) {
+ if (!die || this->boundary[die-1] != maxbdry) {
+ i++;
+ mtd->eraseregions[i].offset = ofs;
+ mtd->eraseregions[i].erasesize = 1 << eraseshift;
+ mtd->eraseregions[i].numblocks =
+ this->boundary[die] + 1;
+ ofs += mtd->eraseregions[i].numblocks << eraseshift;
+ eraseshift++;
+ } else {
+ mtd->numeraseregions -= 1;
+ mtd->eraseregions[i].numblocks +=
+ this->boundary[die] + 1;
+ ofs += (this->boundary[die] + 1) << (eraseshift - 1);
+ }
+ if (this->boundary[die] != maxbdry) {
+ i++;
+ mtd->eraseregions[i].offset = ofs;
+ mtd->eraseregions[i].erasesize = 1 << eraseshift;
+ mtd->eraseregions[i].numblocks = maxbdry ^
+ this->boundary[die];
+ ofs += mtd->eraseregions[i].numblocks << eraseshift;
+ eraseshift--;
+ } else
+ mtd->numeraseregions -= 1;
+ }
+
+ /* Expose MLC erase size except when all blocks are SLC */
+ mtd->erasesize = 1 << this->erase_shift;
+ if (mtd->numeraseregions == 1)
+ mtd->erasesize >>= 1;
+
+ printk(KERN_INFO "Device has %d eraseregions\n", mtd->numeraseregions);
+ for (i = 0; i < mtd->numeraseregions; i++)
+ printk(KERN_INFO "[offset: 0x%08llx, erasesize: 0x%05x,"
+ " numblocks: %04u]\n", mtd->eraseregions[i].offset,
+ mtd->eraseregions[i].erasesize,
+ mtd->eraseregions[i].numblocks);
+
+ for (die = 0, mtd->size = 0; die < this->dies; die++) {
+ this->diesize[die] = (loff_t) (blksperdie << this->erase_shift);
+ this->diesize[die] -= (loff_t) (this->boundary[die] + 1)
+ << (this->erase_shift - 1);
+ mtd->size += this->diesize[die];
+ }
+}
+
+/**
+ * flexonenand_check_blocks_erased - Check if blocks are erased
+ * @param mtd_info - mtd info structure
+ * @param start - first erase block to check
+ * @param end - last erase block to check
+ *
+ * Converting an unerased block from MLC to SLC
+ * causes byte values to change. Since both data and its ECC
+ * have changed, reads on the block give uncorrectable error.
+ * This might lead to the block being detected as bad.
+ *
+ * Avoid this by ensuring that the block to be converted is
+ * erased.
+ */
+static int flexonenand_check_blocks_erased(struct mtd_info *mtd,
+ int start, int end)
+{
+ struct onenand_chip *this = mtd->priv;
+ int i, ret;
+ int block;
+ struct mtd_oob_ops ops = {
+ .mode = MTD_OOB_PLACE,
+ .ooboffs = 0,
+ .ooblen = mtd->oobsize,
+ .datbuf = NULL,
+ .oobbuf = this->oob_buf,
+ };
+ loff_t addr;
+
+ printk(KERN_DEBUG "Check blocks from %d to %d\n", start, end);
+
+ for (block = start; block <= end; block++) {
+ addr = flexonenand_addr(this, block);
+ if (onenand_block_isbad_nolock(mtd, addr, 0))
+ continue;
+
+ /*
+ * Since main area write results in ECC write to spare,
+ * it is sufficient to check only ECC bytes for change.
+ */
+ ret = onenand_read_oob_nolock(mtd, addr, &ops);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < mtd->oobsize; i++)
+ if (this->oob_buf[i] != 0xff)
+ break;
+
+ if (i != mtd->oobsize) {
+ printk(KERN_WARNING "Block %d not erased.\n", block);
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * flexonenand_set_boundary - Writes the SLC boundary
+ * @param mtd - mtd info structure
+ */
+int flexonenand_set_boundary(struct mtd_info *mtd, int die,
+ int boundary, int lock)
+{
+ struct onenand_chip *this = mtd->priv;
+ int ret, density, blksperdie, old, new, thisboundary;
+ loff_t addr;
+
+ if (die >= this->dies)
+ return -EINVAL;
+
+ if (boundary == this->boundary[die])
+ return 0;
+
+ density = onenand_get_density(this->device_id);
+ blksperdie = ((16 << density) << 20) >> this->erase_shift;
+ blksperdie >>= ONENAND_IS_DDP(this) ? 1 : 0;
+
+ if (boundary >= blksperdie) {
+ printk("flexonenand_set_boundary:"
+ "Invalid boundary value. "
+ "Boundary not changed.\n");
+ return -EINVAL;
+ }
+
+ /* Check if converting blocks are erased */
+ old = this->boundary[die] + (die * this->density_mask);
+ new = boundary + (die * this->density_mask);
+ ret = flexonenand_check_blocks_erased(mtd, min(old, new)
+ + 1, max(old, new));
+ if (ret) {
+ printk(KERN_ERR "flexonenand_set_boundary: Please erase blocks before boundary change\n");
+ return ret;
+ }
+
+ this->command(mtd, FLEXONENAND_CMD_PI_ACCESS, die, 0);
+ this->wait(mtd, FL_SYNCING);
+
+ /* Check is boundary is locked */
+ this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0);
+ ret = this->wait(mtd, FL_READING);
+
+ thisboundary = this->read_word(this->base + ONENAND_DATARAM);
+ if ((thisboundary >> FLEXONENAND_PI_UNLOCK_SHIFT) != 3) {
+ printk(KERN_ERR "flexonenand_set_boundary: boundary locked\n");
+ goto out;
+ }
+
+ printk(KERN_INFO "flexonenand_set_boundary: Changing die %d boundary: %d%s\n",
+ die, boundary, lock ? "(Locked)" : "(Unlocked)");
+
+ boundary &= FLEXONENAND_PI_MASK;
+ boundary |= lock ? 0 : (3 << FLEXONENAND_PI_UNLOCK_SHIFT);
+
+ addr = die ? this->diesize[0] : 0;
+ this->command(mtd, ONENAND_CMD_ERASE, addr, 0);
+ ret = this->wait(mtd, FL_ERASING);
+ if (ret) {
+ printk("flexonenand_set_boundary:"
+ "Failed PI erase for Die %d\n", die);
+ goto out;
+ }
+
+ this->write_word(boundary, this->base + ONENAND_DATARAM);
+ this->command(mtd, ONENAND_CMD_PROG, addr, 0);
+ ret = this->wait(mtd, FL_WRITING);
+ if (ret) {
+ printk("flexonenand_set_boundary:"
+ "Failed PI write for Die %d\n", die);
+ goto out;
+ }
+
+ this->command(mtd, FLEXONENAND_CMD_PI_UPDATE, die, 0);
+ ret = this->wait(mtd, FL_WRITING);
+out:
+ this->write_word(ONENAND_CMD_RESET, this->base + ONENAND_REG_COMMAND);
+ this->wait(mtd, FL_RESETING);
+ if (!ret)
+ /* Recalculate device size on boundary change*/
+ flexonenand_get_size(mtd);
+
+ return ret;
+}
+
+/**
* onenand_probe - [OneNAND Interface] Probe the OneNAND device
* @param mtd MTD device structure
*
@@ -2016,48 +2546,69 @@ static int onenand_probe(struct mtd_info *mtd)
maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID);
dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID);
ver_id = this->read_word(this->base + ONENAND_REG_VERSION_ID);
+ this->technology = this->read_word(this->base + ONENAND_REG_TECHNOLOGY);
/* Check OneNAND device */
if (maf_id != bram_maf_id || dev_id != bram_dev_id)
return -ENXIO;
- /* FIXME : Current OneNAND MTD doesn't support Flex-OneNAND */
- if (dev_id & (1 << 9)) {
- printk("Not yet support Flex-OneNAND\n");
- return -ENXIO;
- }
-
/* Flash device information */
mtd->name = onenand_print_device_info(dev_id, ver_id);
this->device_id = dev_id;
this->version_id = ver_id;
density = onenand_get_density(dev_id);
+ if (FLEXONENAND(this)) {
+ this->dies = ONENAND_IS_DDP(this) ? 2 : 1;
+ /* Maximum possible erase regions */
+ mtd->numeraseregions = this->dies << 1;
+ mtd->eraseregions = malloc(sizeof(struct mtd_erase_region_info)
+ * (this->dies << 1));
+ if (!mtd->eraseregions)
+ return -ENOMEM;
+ }
+
+ /*
+ * For Flex-OneNAND, chipsize represents maximum possible device size.
+ * mtd->size represents the actual device size.
+ */
this->chipsize = (16 << density) << 20;
- /* Set density mask. it is used for DDP */
- if (ONENAND_IS_DDP(this))
- this->density_mask = (1 << (density + 6));
- else
- this->density_mask = 0;
/* OneNAND page size & block size */
/* The data buffer size is equal to page size */
mtd->writesize =
this->read_word(this->base + ONENAND_REG_DATA_BUFFER_SIZE);
+ /* We use the full BufferRAM */
+ if (ONENAND_IS_MLC(this))
+ mtd->writesize <<= 1;
+
mtd->oobsize = mtd->writesize >> 5;
/* Pagers per block is always 64 in OneNAND */
mtd->erasesize = mtd->writesize << 6;
+ /*
+ * Flex-OneNAND SLC area has 64 pages per block.
+ * Flex-OneNAND MLC area has 128 pages per block.
+ * Expose MLC erase size to find erase_shift and page_mask.
+ */
+ if (FLEXONENAND(this))
+ mtd->erasesize <<= 1;
this->erase_shift = ffs(mtd->erasesize) - 1;
this->page_shift = ffs(mtd->writesize) - 1;
this->ppb_shift = (this->erase_shift - this->page_shift);
this->page_mask = (mtd->erasesize / mtd->writesize) - 1;
+ /* Set density mask. it is used for DDP */
+ if (ONENAND_IS_DDP(this))
+ this->density_mask = this->chipsize >> (this->erase_shift + 1);
/* It's real page size */
this->writesize = mtd->writesize;
/* REVIST: Multichip handling */
- mtd->size = this->chipsize;
+ if (FLEXONENAND(this))
+ flexonenand_get_size(mtd);
+ else
+ mtd->size = this->chipsize;
/* Check OneNAND features */
onenand_check_features(mtd);
@@ -2149,6 +2700,11 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
* Allow subpage writes up to oobsize.
*/
switch (mtd->oobsize) {
+ case 128:
+ this->ecclayout = &onenand_oob_128;
+ mtd->subpage_sft = 0;
+ break;
+
case 64:
this->ecclayout = &onenand_oob_64;
mtd->subpage_sft = 2;
diff --git a/drivers/mtd/onenand/onenand_bbt.c b/drivers/mtd/onenand/onenand_bbt.c
index d538f95..1354877 100644
--- a/drivers/mtd/onenand/onenand_bbt.c
+++ b/drivers/mtd/onenand/onenand_bbt.c
@@ -69,6 +69,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t * buf,
loff_t from;
size_t readlen, ooblen;
struct mtd_oob_ops ops;
+ int rgn;
printk(KERN_INFO "Scanning device for bad blocks\n");
@@ -82,7 +83,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t * buf,
/* Note that numblocks is 2 * (real numblocks) here;
* see i += 2 below as it makses shifting and masking less painful
*/
- numblocks = mtd->size >> (bbm->bbt_erase_shift - 1);
+ numblocks = this->chipsize >> (bbm->bbt_erase_shift - 1);
startblock = 0;
from = 0;
@@ -115,7 +116,12 @@ static int create_bbt(struct mtd_info *mtd, uint8_t * buf,
}
}
i += 2;
- from += (1 << bbm->bbt_erase_shift);
+
+ if (FLEXONENAND(this)) {
+ rgn = flexonenand_region(mtd, from);
+ from += mtd->eraseregions[rgn].erasesize;
+ } else
+ from += (1 << bbm->bbt_erase_shift);
}
return 0;
@@ -152,7 +158,7 @@ static int onenand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
uint8_t res;
/* Get block number * 2 */
- block = (int)(offs >> (bbm->bbt_erase_shift - 1));
+ block = (int) (onenand_block(this, offs) << 1);
res = (bbm->bbt[block >> 3] >> (block & 0x06)) & 0x03;
MTDDEBUG (MTD_DEBUG_LEVEL2,
@@ -191,7 +197,7 @@ int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
struct bbm_info *bbm = this->bbm;
int len, ret = 0;
- len = mtd->size >> (this->erase_shift + 2);
+ len = this->chipsize >> (this->erase_shift + 2);
/* Allocate memory (2bit per block) */
bbm->bbt = malloc(len);
if (!bbm->bbt) {
diff --git a/drivers/mtd/onenand/onenand_uboot.c b/drivers/mtd/onenand/onenand_uboot.c
index 9823b5b..c642016 100644
--- a/drivers/mtd/onenand/onenand_uboot.c
+++ b/drivers/mtd/onenand/onenand_uboot.c
@@ -40,8 +40,10 @@ void onenand_init(void)
onenand_scan(&onenand_mtd, 1);
+ if (onenand_chip.device_id & DEVICE_IS_FLEXONENAND)
+ puts("Flex-");
puts("OneNAND: ");
- print_size(onenand_mtd.size, "\n");
+ print_size(onenand_chip.chipsize, "\n");
#ifdef CONFIG_MTD_DEVICE
/*
diff --git a/drivers/rtc/ftrtc010.c b/drivers/rtc/ftrtc010.c
index c3c0bc2..7738a7a 100644
--- a/drivers/rtc/ftrtc010.c
+++ b/drivers/rtc/ftrtc010.c
@@ -47,15 +47,15 @@ struct ftrtc010 {
static struct ftrtc010 *rtc = (struct ftrtc010 *)CONFIG_FTRTC010_BASE;
-static void ftrtc010_enable (void)
+static void ftrtc010_enable(void)
{
- writel (FTRTC010_CR_ENABLE, &rtc->cr);
+ writel(FTRTC010_CR_ENABLE, &rtc->cr);
}
/*
* return current time in seconds
*/
-static unsigned long ftrtc010_time (void)
+static unsigned long ftrtc010_time(void)
{
unsigned long day;
unsigned long hour;
@@ -64,11 +64,11 @@ static unsigned long ftrtc010_time (void)
unsigned long second2;
do {
- second = readl (&rtc->sec);
- day = readl (&rtc->day);
- hour = readl (&rtc->hour);
- minute = readl (&rtc->min);
- second2 = readl (&rtc->sec);
+ second = readl(&rtc->sec);
+ day = readl(&rtc->day);
+ hour = readl(&rtc->hour);
+ minute = readl(&rtc->min);
+ second2 = readl(&rtc->sec);
} while (second != second2);
return day * 24 * 60 * 60 + hour * 60 * 60 + minute * 60 + second;
@@ -78,16 +78,16 @@ static unsigned long ftrtc010_time (void)
* Get the current time from the RTC
*/
-int rtc_get (struct rtc_time *tmp)
+int rtc_get(struct rtc_time *tmp)
{
unsigned long now;
- debug ("%s(): record register: %x\n",
- __func__, readl (&rtc->record));
+ debug("%s(): record register: %x\n",
+ __func__, readl(&rtc->record));
- now = ftrtc010_time () + readl (&rtc->record);
+ now = ftrtc010_time() + readl(&rtc->record);
- to_tm (now, tmp);
+ to_tm(now, tmp);
return 0;
}
@@ -95,30 +95,30 @@ int rtc_get (struct rtc_time *tmp)
/*
* Set the RTC
*/
-int rtc_set (struct rtc_time *tmp)
+int rtc_set(struct rtc_time *tmp)
{
unsigned long new;
unsigned long now;
- debug ("%s(): DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
- __func__,
- tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
- tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+ debug("%s(): DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
+ __func__,
+ tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+ tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
- new = mktime (tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_hour,
- tmp->tm_min, tmp->tm_sec);
+ new = mktime(tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_hour,
+ tmp->tm_min, tmp->tm_sec);
- now = ftrtc010_time ();
+ now = ftrtc010_time();
- debug ("%s(): write %lx to record register\n", __func__, new - now);
+ debug("%s(): write %lx to record register\n", __func__, new - now);
- writel (new - now, &rtc->record);
+ writel(new - now, &rtc->record);
return 0;
}
-void rtc_reset (void)
+void rtc_reset(void)
{
- debug ("%s()\n", __func__);
- ftrtc010_enable ();
+ debug("%s()\n", __func__);
+ ftrtc010_enable();
}
diff --git a/drivers/rtc/m41t94.c b/drivers/rtc/m41t94.c
index 02b41d9..5b665bb 100644
--- a/drivers/rtc/m41t94.c
+++ b/drivers/rtc/m41t94.c
@@ -120,5 +120,4 @@ void rtc_reset(void)
* Could not be tested as the reset pin is not wired on
* the sbc35-ag20 board
*/
- return 0;
}
diff --git a/drivers/rtc/s3c24x0_rtc.c b/drivers/rtc/s3c24x0_rtc.c
index 1ce34e3..04de5ca 100644
--- a/drivers/rtc/s3c24x0_rtc.c
+++ b/drivers/rtc/s3c24x0_rtc.c
@@ -30,11 +30,7 @@
#if (defined(CONFIG_CMD_DATE))
-#if defined(CONFIG_S3C2400)
-#include <s3c2400.h>
-#elif defined(CONFIG_S3C2410)
-#include <s3c2410.h>
-#endif
+#include <asm/arch/s3c24x0_cpu.h>
#include <rtc.h>
#include <asm/io.h>
diff --git a/drivers/serial/s3c64xx.c b/drivers/serial/s3c64xx.c
index 1b974e0..6d22df7 100644
--- a/drivers/serial/s3c64xx.c
+++ b/drivers/serial/s3c64xx.c
@@ -23,7 +23,7 @@
#include <common.h>
-#include <s3c6400.h>
+#include <asm/arch/s3c6400.h>
#ifdef CONFIG_SERIAL1
#define UART_NR S3C64XX_UART0
diff --git a/drivers/serial/serial_s3c24x0.c b/drivers/serial/serial_s3c24x0.c
index c2c72e4..5dd4dd8 100644
--- a/drivers/serial/serial_s3c24x0.c
+++ b/drivers/serial/serial_s3c24x0.c
@@ -19,11 +19,7 @@
*/
#include <common.h>
-#if defined(CONFIG_S3C2400) || defined(CONFIG_TRAB)
-#include <s3c2400.h>
-#elif defined(CONFIG_S3C2410)
-#include <s3c2410.h>
-#endif
+#include <asm/arch/s3c24x0_cpu.h>
DECLARE_GLOBAL_DATA_PTR;
diff --git a/drivers/serial/serial_s5pc1xx.c b/drivers/serial/serial_s5pc1xx.c
index 68c06a9..73669a9 100644
--- a/drivers/serial/serial_s5pc1xx.c
+++ b/drivers/serial/serial_s5pc1xx.c
@@ -98,14 +98,24 @@ int serial_init_dev(const int dev_index)
return 0;
}
-static int serial_err_check(const int dev_index)
+static int serial_err_check(const int dev_index, int op)
{
struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+ unsigned int mask;
+
+ /*
+ * UERSTAT
+ * Break Detect [3]
+ * Frame Err [2] : receive operation
+ * Parity Err [1] : receive operation
+ * Overrun Err [0] : receive operation
+ */
+ if (op)
+ mask = 0x8;
+ else
+ mask = 0xf;
- if (readl(&uart->uerstat) & 0xf)
- return 1;
-
- return 0;
+ return readl(&uart->uerstat) & mask;
}
/*
@@ -119,7 +129,7 @@ int serial_getc_dev(const int dev_index)
/* wait for character to arrive */
while (!(readl(&uart->utrstat) & 0x1)) {
- if (serial_err_check(dev_index))
+ if (serial_err_check(dev_index, 0))
return 0;
}
@@ -135,7 +145,7 @@ void serial_putc_dev(const char c, const int dev_index)
/* wait for room in the tx FIFO */
while (!(readl(&uart->utrstat) & 0x2)) {
- if (serial_err_check(dev_index))
+ if (serial_err_check(dev_index, 1))
return;
}
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 67d478f..b03a600 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -65,8 +65,7 @@
#endif
#if defined(CONFIG_ARM920T) || \
- defined(CONFIG_S3C2400) || \
- defined(CONFIG_S3C2410) || \
+ defined(CONFIG_S3C24X0) || \
defined(CONFIG_S3C6400) || \
defined(CONFIG_440EP) || \
defined(CONFIG_PCI_OHCI) || \
diff --git a/drivers/usb/host/s3c64xx-hcd.c b/drivers/usb/host/s3c64xx-hcd.c
index 274a4ed..cd295da 100644
--- a/drivers/usb/host/s3c64xx-hcd.c
+++ b/drivers/usb/host/s3c64xx-hcd.c
@@ -25,7 +25,7 @@
*/
#include <common.h>
-#include <s3c6400.h>
+#include <asm/arch/s3c6400.h>
int usb_cpu_init(void)
{
diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c
index fbc4df9..16d6689 100644
--- a/drivers/video/cfb_console.c
+++ b/drivers/video/cfb_console.c
@@ -146,9 +146,11 @@ CONFIG_VIDEO_HW_CURSOR: - Uses the hardware cursor capability of the
#ifdef CONFIG_VIDEO_CORALP
#define VIDEO_FB_LITTLE_ENDIAN
#endif
+#ifdef CONFIG_VIDEO_MB862xx_ACCEL
#define VIDEO_HW_RECTFILL
#define VIDEO_HW_BITBLT
#endif
+#endif
/*****************************************************************************/
/* Include video_fb.h after definitions of VIDEO_HW_RECTFILL etc */
@@ -319,7 +321,7 @@ void console_cursor (int state);
#else
#define SWAP16(x) (x)
#define SWAP32(x) (x)
-#if defined(VIDEO_FB_16BPP_PIXEL_SWAP)
+#if defined(VIDEO_FB_16BPP_WORD_SWAP)
#define SHORTSWAP32(x) ( ((x) >> 16) | ((x) << 16) )
#else
#define SHORTSWAP32(x) (x)
diff --git a/drivers/video/mb862xx.c b/drivers/video/mb862xx.c
index a8676cc..edf34aa 100644
--- a/drivers/video/mb862xx.c
+++ b/drivers/video/mb862xx.c
@@ -89,6 +89,7 @@ unsigned int fr_div[] = { 0x00000f00, 0x00000900, 0x00000500 };
(GC_DISP_BASE | GC_L0PAL0) + \
((idx) << 2)), (val))
+#if defined(CONFIG_VIDEO_MB862xx_ACCEL)
static void gdc_sw_reset (void)
{
GraphicDevice *dev = &mb862xx;
@@ -129,6 +130,7 @@ static void de_wait_slots (int slots)
break;
}
}
+#endif
#if !defined(CONFIG_VIDEO_CORALP)
static void board_disp_init (void)
@@ -144,11 +146,13 @@ static void board_disp_init (void)
#endif
/*
- * Init drawing engine
+ * Init drawing engine if accel enabled.
+ * Also clears visible framebuffer.
*/
static void de_init (void)
{
GraphicDevice *dev = &mb862xx;
+#if defined(CONFIG_VIDEO_MB862xx_ACCEL)
int cf = (dev->gdfBytesPP == 1) ? 0x0000 : 0x8000;
dev->dprBase = dev->frameAdrs + GC_DRAW_BASE;
@@ -174,6 +178,14 @@ static void de_init (void)
DE_WR_FIFO (dev->winSizeY << 16 | dev->winSizeX);
/* sync with SW access to framebuffer */
de_wait ();
+#else
+ unsigned int i, *p;
+
+ i = dev->winSizeX * dev->winSizeY;
+ p = (unsigned int *)dev->frameAdrs;
+ while (i--)
+ *p++ = 0;
+#endif
}
#if defined(CONFIG_VIDEO_CORALP)
@@ -340,6 +352,30 @@ unsigned int card_init (void)
}
#endif
+
+#if !defined(CONFIG_VIDEO_CORALP)
+int mb862xx_probe(unsigned int addr)
+{
+ GraphicDevice *dev = &mb862xx;
+ unsigned int reg;
+
+ dev->frameAdrs = addr;
+ dev->dprBase = dev->frameAdrs + GC_DRAW_BASE;
+
+ /* Try to access GDC ID/Revision registers */
+ reg = HOST_RD_REG (GC_CID);
+ reg = HOST_RD_REG (GC_CID);
+ if (reg == 0x303) {
+ reg = DE_RD_REG(GC_REV);
+ reg = DE_RD_REG(GC_REV);
+ if ((reg & ~0xff) == 0x20050100)
+ return MB862XX_TYPE_LIME;
+ }
+
+ return 0;
+}
+#endif
+
void *video_hw_init (void)
{
GraphicDevice *dev = &mb862xx;
@@ -359,8 +395,16 @@ void *video_hw_init (void)
if ((dev->frameAdrs = board_video_init ()) == 0) {
puts ("Controller not found!\n");
return NULL;
- } else
+ } else {
puts ("Lime\n");
+
+ /* Set Change of Clock Frequency Register */
+ HOST_WR_REG (GC_CCF, CONFIG_SYS_MB862xx_CCF);
+ /* Delay required */
+ udelay(300);
+ /* Set Memory I/F Mode Register) */
+ HOST_WR_REG (GC_MMR, CONFIG_SYS_MB862xx_MMR);
+ }
#endif
de_init ();
@@ -389,6 +433,7 @@ void video_set_lut (unsigned int index, unsigned char r,
L0PAL_WR_REG (index, (r << 16) | (g << 8) | (b));
}
+#if defined(CONFIG_VIDEO_MB862xx_ACCEL)
/*
* Drawing engine Fill and BitBlt screen region
*/
@@ -430,3 +475,4 @@ void video_hw_bitblt (unsigned int bpp, unsigned int src_x,
DE_WR_FIFO ((height << 16) | width);
de_wait (); /* sync */
}
+#endif