diff options
Diffstat (limited to 'include/configs/da830evm.h')
| -rw-r--r-- | include/configs/da830evm.h | 279 |
1 files changed, 0 insertions, 279 deletions
diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h deleted file mode 100644 index 7ac3224..0000000 --- a/include/configs/da830evm.h +++ /dev/null @@ -1,279 +0,0 @@ -/* - * Copyright (C) 2008 Texas Instruments, Inc <www.ti.com> - * - * Based on davinci_dvevm.h. Original Copyrights follow: - * - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * Board - */ -#define CONFIG_DRIVER_TI_EMAC -#define CONFIG_USE_SPIFLASH - -/* - * SoC Configuration - */ -#define CONFIG_MACH_DAVINCI_DA830_EVM -#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ -#define CONFIG_SOC_DA830 /* TI DA830 SoC */ -#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) -#define CONFIG_SYS_OSCIN_FREQ 24000000 -#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE -#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_TEXT_BASE 0xc1080000 - -/* - * Memory Info - */ -#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */ -#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Start */ -#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ - (32 << 20)) -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ - -/* - * Serial Driver info - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */ -#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */ -#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) -#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ -#define CONFIG_BAUDRATE 115200 /* Default baud rate */ - -/* - * I2C Configuration - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 25000 /* 100Kbps won't work, H/W bug */ -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ - -/* - * I2C EEPROM definitions for catalyst 24W256 EEPROM chip - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 - -/* - * Network & Ethernet Configuration - */ -#ifdef CONFIG_DRIVER_TI_EMAC -#define CONFIG_MII -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 -#endif - -/* - * Flash & Environment - */ -#ifdef CONFIG_USE_NAND -#undef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ -#define CONFIG_ENV_OFFSET (512 << 10) -#define CONFIG_ENV_SIZE (10 << 10) /* 10KB */ -#define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST -#define CONFIG_SYS_NAND_PAGE_2K -#define CONFIG_SYS_NAND_CS 3 -#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE -#define CONFIG_SYS_NAND_PAGE_2K -#define CONFIG_SYS_NAND_MASK_CLE 0x10 -#define CONFIG_SYS_NAND_MASK_ALE 0x8 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#endif - -#ifdef CONFIG_USE_NOR -#define CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_SYS_NO_FLASH -#define CONFIG_SYS_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */ -#define CONFIG_SYS_FLASH_SECT_SZ (64 << 10) /* 64KB */ -#define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_SECT_SZ*3) -#define CONFIG_SYS_FLASH_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE -#define PHYS_FLASH_SIZE (32 << 20) /* Flash size 32MB */ -#define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ) -#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_FLASH_SECT_SZ -#define CONFIG_SYS_FLASH_SPL_ACCESS -#endif - -#ifdef CONFIG_USE_SPIFLASH -#undef CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SIZE (16 << 10) -#define CONFIG_ENV_OFFSET (256 << 10) -#define CONFIG_ENV_SECT_SIZE 4096 -#define CONFIG_SYS_NO_FLASH -#define CONFIG_SPI -#define CONFIG_SPI_FLASH_WINBOND -#define CONFIG_DAVINCI_SPI -#define CONFIG_SYS_SPI_BASE DAVINCI_SPI0_BASE -#define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI0_CLKID) -#define CONFIG_SF_DEFAULT_SPEED 30000000 -#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED -#endif - -/* - * USB configuration - */ -#define CONFIG_USB_DA8XX /* Platform hookup to MUSB controller */ -#define CONFIG_USB_MUSB_HCD - -/* - * U-Boot general configuration - */ -#undef CONFIG_MISC_INIT_R -#undef CONFIG_BOOTDELAY -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC - -/* - * Linux Information - */ -#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTARGS "mem=32M console=ttyS2,115200n8 root=/dev/mtdblock/2 rw noinitrd ip=dhcp" -#define CONFIG_BOOTCOMMAND "" -#define CONFIG_BOOTDELAY 3 - -/* - * U-Boot commands - */ -#define CONFIG_CMD_ENV -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#ifndef CONFIG_DRIVER_TI_EMAC -#undef CONFIG_CMD_DHCP -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_PING -#endif - -#ifdef CONFIG_USE_NAND -#define CONFIG_CMD_NAND -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_PARTITIONS -#define CONFIG_MTD_DEVICE -#endif - -#ifdef CONFIG_USE_SPIFLASH -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF -#endif - -/* SD/MMC configuration */ -#ifndef CONFIG_USE_NAND -#define CONFIG_MMC -#define CONFIG_DAVINCI_MMC_SD1 -#define CONFIG_GENERIC_MMC -#define CONFIG_DAVINCI_MMC -#endif - -/* - * Enable MMC commands only when - * MMC support is present - */ -#if defined(CONFIG_MMC) || defined(CONFIG_USB_DA8XX) -#define CONFIG_DOS_PARTITION /* include support for FAT/storage */ -#define CONFIG_CMD_FAT /* include support for FAT cmd */ -#endif - -#ifdef CONFIG_MMC -#define CONFIG_CMD_MMC -#define CONFIG_CMD_EXT2 -#endif - -#if !defined(CONFIG_USE_NAND) && \ - !defined(CONFIG_USE_NOR) && \ - !defined(CONFIG_USE_SPIFLASH) -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_SIZE (16 << 10) -#undef CONFIG_CMD_ENV -#endif - -#ifdef CONFIG_USB_DA8XX - -#ifdef CONFIG_USB_MUSB_HCD /* include support for usb host */ -#define CONFIG_CMD_USB /* include support for usb cmd */ - -#define CONFIG_USB_STORAGE /* MSC class support */ -#define CONFIG_CMD_STORAGE /* inclue support for usb-storage cmd */ - -#ifdef CONFIG_USB_KEYBOARD /* HID class support */ -#define CONFIG_SYS_USB_EVENT_POLL -#define CONFIG_PREBOOT "usb start" -#endif /* CONFIG_USB_KEYBOARD */ - -#endif /* CONFIG_USB_MUSB_HCD */ - -#ifdef CONFIG_USB_MUSB_UDC -/* USB device configuration */ -#define CONFIG_USB_DEVICE 1 -#define CONFIG_USB_TTY 1 -#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 -/* Change these to suit your needs */ -#define CONFIG_USBD_VENDORID 0x0451 -#define CONFIG_USBD_PRODUCTID 0x5678 -#define CONFIG_USBD_MANUFACTURER "Texas Instruments" -#define CONFIG_USBD_PRODUCT_NAME "DA830EVM" -#endif /* CONFIG_USB_MUSB_UDC */ - -#endif /* CONFIG_USB_DA8XX */ - -#ifdef CONFIG_MTD_PARTITIONS -#define MTDIDS_DEFAULT "nand0=davinci_nand.1" -#define PART_BOOT "512k(bootloader)ro," -#define PART_PARAMS "512k(params)ro," -#define PART_KERNEL "4m(kernel)," -#define PART_REST "-(filesystem)" -#define MTDPARTS_DEFAULT \ - "mtdparts=davinci_nand.1:" PART_BOOT PART_PARAMS PART_KERNEL PART_REST -#endif - -#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ - -/* additions for new relocation code, must be added to all boards */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ |