diff options
Diffstat (limited to 'include')
-rw-r--r-- | include/configs/arndale.h | 4 | ||||
-rw-r--r-- | include/configs/exynos4-dt.h | 4 | ||||
-rw-r--r-- | include/configs/exynos5-dt.h | 1 | ||||
-rw-r--r-- | include/configs/exynos5250-dt.h | 2 | ||||
-rw-r--r-- | include/configs/mx25pdk.h | 2 | ||||
-rw-r--r-- | include/configs/mx35pdk.h | 2 | ||||
-rw-r--r-- | include/configs/mx53evk.h | 2 | ||||
-rw-r--r-- | include/configs/mx53loco.h | 2 | ||||
-rw-r--r-- | include/configs/s5p_goni.h | 113 | ||||
-rw-r--r-- | include/configs/woodburn_common.h | 2 | ||||
-rw-r--r-- | include/dwmmc.h | 5 | ||||
-rw-r--r-- | include/fdtdec.h | 4 | ||||
-rw-r--r-- | include/initcall.h | 2 | ||||
-rw-r--r-- | include/mmc.h | 25 | ||||
-rw-r--r-- | include/power/max77693_pmic.h | 2 | ||||
-rw-r--r-- | include/power/max8997_pmic.h | 1 | ||||
-rw-r--r-- | include/power/pmic.h | 5 | ||||
-rw-r--r-- | include/power/tps65090_pmic.h | 73 |
18 files changed, 191 insertions, 60 deletions
diff --git a/include/configs/arndale.h b/include/configs/arndale.h index 515facf..30ecd45 100644 --- a/include/configs/arndale.h +++ b/include/configs/arndale.h @@ -224,8 +224,8 @@ /* PMIC */ #define CONFIG_PMIC -#define CONFIG_PMIC_I2C -#define CONFIG_PMIC_MAX77686 +#define CONFIG_POWER_I2C +#define CONFIG_POWER_MAX77686 #define CONFIG_DEFAULT_DEVICE_TREE exynos5250-arndale diff --git a/include/configs/exynos4-dt.h b/include/configs/exynos4-dt.h index cbd2d20..44e6ab4 100644 --- a/include/configs/exynos4-dt.h +++ b/include/configs/exynos4-dt.h @@ -20,6 +20,7 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO #define CONFIG_BOARD_COMMON +#define CONFIG_SYS_GENERIC_BOARD /* Enable fdt support */ #define CONFIG_OF_CONTROL @@ -44,6 +45,9 @@ #define CONFIG_S5P_SDHCI #define CONFIG_SDHCI #define CONFIG_MMC_SDMA +#define CONFIG_DWMMC +#define CONFIG_EXYNOS_DWMMC +#define CONFIG_BOUNCE_BUFFER #define CONFIG_MMC_DEFAULT_DEV 0 /* PWM */ diff --git a/include/configs/exynos5-dt.h b/include/configs/exynos5-dt.h index 5a9b1b4..b830495 100644 --- a/include/configs/exynos5-dt.h +++ b/include/configs/exynos5-dt.h @@ -259,6 +259,7 @@ /* PMIC */ #define CONFIG_POWER #define CONFIG_POWER_I2C +#define CONFIG_POWER_TPS65090 /* Ethernet Controllor Driver */ #ifdef CONFIG_CMD_NET diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h index b7ff472..9d1d56a 100644 --- a/include/configs/exynos5250-dt.h +++ b/include/configs/exynos5250-dt.h @@ -45,7 +45,7 @@ #define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK /* PMIC */ -#define CONFIG_PMIC_MAX77686 +#define CONFIG_POWER_MAX77686 /* Sound */ #define CONFIG_CMD_SOUND diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h index aff2419..d464ad9 100644 --- a/include/configs/mx25pdk.h +++ b/include/configs/mx25pdk.h @@ -107,7 +107,7 @@ #define CONFIG_POWER #define CONFIG_POWER_I2C #define CONFIG_POWER_FSL -#define CONFIG_PMIC_FSL_MC34704 +#define CONFIG_POWER_FSL_MC34704 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x54 #define CONFIG_DOS_PARTITION diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h index 0a46f4c..ab48144 100644 --- a/include/configs/mx35pdk.h +++ b/include/configs/mx35pdk.h @@ -52,7 +52,7 @@ #define CONFIG_POWER #define CONFIG_POWER_I2C #define CONFIG_POWER_FSL -#define CONFIG_PMIC_FSL_MC13892 +#define CONFIG_POWER_FSL_MC13892 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x08 #define CONFIG_RTC_MC13XXX diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h index 5bbae8c..fb2072d 100644 --- a/include/configs/mx53evk.h +++ b/include/configs/mx53evk.h @@ -47,7 +47,7 @@ #define CONFIG_POWER_I2C #define CONFIG_POWER_FSL #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 8 -#define CONFIG_PMIC_FSL_MC13892 +#define CONFIG_POWER_FSL_MC13892 #define CONFIG_RTC_MC13XXX /* MMC Configs */ diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index 12d79b4..a74508c 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -82,7 +82,7 @@ #define CONFIG_POWER_I2C #define CONFIG_DIALOG_POWER #define CONFIG_POWER_FSL -#define CONFIG_PMIC_FSL_MC13892 +#define CONFIG_POWER_FSL_MC13892 #define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8 diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 799d4fe..fce1716 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -17,6 +17,7 @@ #define CONFIG_S5PC110 1 /* which is in a S5PC110 */ #define CONFIG_MACH_GONI 1 /* working with Goni */ +#include <linux/sizes.h> #include <asm/arch/cpu.h> /* get chip and board defs */ #define CONFIG_ARCH_CPU_INIT @@ -38,11 +39,9 @@ #define CONFIG_INITRD_TAG #define CONFIG_CMDLINE_EDITING -/* - * Size of malloc() pool - * 1MB = 0x100000, 0x100000 = 1024 * 1024 - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) +/* Size of malloc() pool.*/ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 80 * SZ_1M) + /* * select serial console configuration */ @@ -72,14 +71,19 @@ #define CONFIG_CMD_CACHE #define CONFIG_CMD_REGINFO #define CONFIG_CMD_ONENAND -#define CONFIG_CMD_MTDPARTS #define CONFIG_CMD_MMC +#define CONFIG_CMD_DFU +#define CONFIG_CMD_GPT -#define CONFIG_BOOTDELAY 1 -#define CONFIG_ZERO_BOOTDELAY_CHECK +/* USB Composite download gadget - g_dnl */ +#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_DFU_FUNCTION +#define CONFIG_DFU_MMC -#define CONFIG_MTD_DEVICE -#define CONFIG_MTD_PARTITIONS +/* USB Samsung's IDs */ +#define CONFIG_G_DNL_VENDOR_NUM 0x04E8 +#define CONFIG_G_DNL_PRODUCT_NUM 0x6601 +#define CONFIG_G_DNL_MANUFACTURER "Samsung" /* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */ #define MTDIDS_DEFAULT "onenand0=samsung-onenand" @@ -90,30 +94,52 @@ ",7m(kernel)"\ ",1m(log)"\ ",12m(modem)"\ - ",60m(qboot)"\ - ",-(UBI)\0" + ",60m(qboot)\0" -#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT +#define CONFIG_BOOTDELAY 1 +#define CONFIG_ZERO_BOOTDELAY_CHECK -#define CONFIG_BOOTCOMMAND "run ubifsboot" +/* partitions definitions */ +#define PARTS_CSA "csa-mmc" +#define PARTS_BOOTLOADER "u-boot" +#define PARTS_BOOT "boot" +#define PARTS_ROOT "platform" +#define PARTS_DATA "data" +#define PARTS_CSC "csc" +#define PARTS_UMS "ums" + +#define CONFIG_DFU_ALT \ + "u-boot raw 0x80 0x400;" \ + "uImage ext4 0 2;" \ + "exynos3-goni.dtb ext4 0 2;" \ + ""PARTS_ROOT" part 0 5\0" + +#define PARTS_DEFAULT \ + "uuid_disk=${uuid_gpt_disk};" \ + "name="PARTS_CSA",size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \ + "name="PARTS_BOOTLOADER",size=60MiB," \ + "uuid=${uuid_gpt_"PARTS_BOOTLOADER"};" \ + "name="PARTS_BOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \ + "name="PARTS_ROOT",size=1GiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \ + "name="PARTS_DATA",size=3GiB,uuid=${uuid_gpt_"PARTS_DATA"};" \ + "name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \ + "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \ + +#define CONFIG_BOOTCOMMAND "run mmcboot" #define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" -#define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext2" \ +#define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext4" \ " ${console} ${meminfo}" #define CONFIG_COMMON_BOOT "${console} ${meminfo} ${mtdparts}" -#define CONFIG_BOOTARGS "root=/dev/mtdblock8 ubi.mtd=8 ubi.mtd=3 ubi.mtd=6" \ - " rootfstype=cramfs " CONFIG_COMMON_BOOT +#define CONFIG_BOOTARGS "root=/dev/mtdblock8 rootfstype=ext4 " \ + CONFIG_COMMON_BOOT #define CONFIG_UPDATEB "updateb=onenand erase 0x0 0x100000;" \ " onenand write 0x32008000 0x0 0x100000\0" -#define CONFIG_UBI_MTD " ubi.mtd=${ubiblock} ubi.mtd=3 ubi.mtd=6" - -#define CONFIG_UBIFS_OPTION "rootflags=bulk_read,no_chk_data_crc" - #define CONFIG_MISC_COMMON #define CONFIG_MISC_INIT_R @@ -130,42 +156,44 @@ "onenand erase 0x01560000 0x1eaa0000;" \ "onenand write 0x32000000 0x1260000 0x8C0000\0" \ "bootk=" \ - "onenand read 0x30007FC0 0xc00000 0x600000;" \ + "run loaduimage;" \ "bootm 0x30007FC0\0" \ "flashboot=" \ "set bootargs root=/dev/mtdblock${bootblock} " \ - "rootfstype=${rootfstype}" CONFIG_UBI_MTD " ${opts} " \ + "rootfstype=${rootfstype} ${opts} " \ "${lcdinfo} " CONFIG_COMMON_BOOT "; run bootk\0" \ "ubifsboot=" \ "set bootargs root=ubi0!rootfs rootfstype=ubifs " \ - CONFIG_UBIFS_OPTION CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \ + "${opts} ${lcdinfo} " \ CONFIG_COMMON_BOOT "; run bootk\0" \ "tftpboot=" \ "set bootargs root=ubi0!rootfs rootfstype=ubifs " \ - CONFIG_UBIFS_OPTION CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \ - CONFIG_COMMON_BOOT "; tftp 0x30007FC0 uImage; " \ - "bootm 0x30007FC0\0" \ + "${opts} ${lcdinfo} " CONFIG_COMMON_BOOT \ + "; tftp 0x30007FC0 uImage; bootm 0x30007FC0\0" \ "ramboot=" \ "set bootargs " CONFIG_RAMDISK_BOOT \ - " initrd=0x33000000,8M ramdisk=8192\0" \ + "initrd=0x33000000,8M ramdisk=8192\0" \ "mmcboot=" \ - "set bootargs root=${mmcblk} rootfstype=${rootfstype}" \ - CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \ + "set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \ + "rootfstype=${rootfstype} ${opts} ${lcdinfo} " \ CONFIG_COMMON_BOOT "; run bootk\0" \ "boottrace=setenv opts initcall_debug; run bootcmd\0" \ "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \ "verify=n\0" \ - "rootfstype=cramfs\0" \ + "rootfstype=ext4\0" \ "console=" CONFIG_DEFAULT_CONSOLE \ - "mtdparts=" MTDPARTS_DEFAULT \ "meminfo=mem=80M mem=256M@0x40000000 mem=128M@0x50000000\0" \ - "mmcblk=/dev/mmcblk1p1\0" \ + "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x30007FC0 uImage\0" \ + "mmcdev=0\0" \ + "mmcbootpart=2\0" \ + "mmcrootpart=5\0" \ + "partitions=" PARTS_DEFAULT \ "bootblock=9\0" \ "ubiblock=8\0" \ "ubi=enabled\0" \ - "opts=always_resume=1" + "opts=always_resume=1\0" \ + "dfu_alt_info=" CONFIG_DFU_ALT "\0" -/* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT "Goni # " @@ -202,6 +230,18 @@ #define CONFIG_DOS_PARTITION 1 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE + +/* write support for filesystems */ +#define CONFIG_FAT_WRITE +#define CONFIG_EXT4_WRITE + +/* GPT */ +#define CONFIG_EFI_PARTITION +#define CONFIG_PARTITION_UUIDS + #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000) #define CONFIG_SYS_CACHELINE_SIZE 64 @@ -226,5 +266,8 @@ #define CONFIG_USB_GADGET #define CONFIG_USB_GADGET_S3C_UDC_OTG #define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_USB_GADGET_VBUS_DRAW 2 +#define CONFIG_CMD_USB_MASS_STORAGE +#define CONFIG_USB_GADGET_MASS_STORAGE #endif /* __CONFIG_H */ diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h index 695bc23..259205e 100644 --- a/include/configs/woodburn_common.h +++ b/include/configs/woodburn_common.h @@ -55,7 +55,7 @@ #define CONFIG_POWER #define CONFIG_POWER_I2C #define CONFIG_POWER_FSL -#define CONFIG_PMIC_FSL_MC13892 +#define CONFIG_POWER_FSL_MC13892 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8 #define CONFIG_RTC_MC13XXX diff --git a/include/dwmmc.h b/include/dwmmc.h index c9bdf51..b67f11b 100644 --- a/include/dwmmc.h +++ b/include/dwmmc.h @@ -123,6 +123,9 @@ #define DWMCI_BMOD_IDMAC_FB (1 << 1) #define DWMCI_BMOD_IDMAC_EN (1 << 7) +/* UHS register */ +#define DWMCI_DDR_MODE (1 << 16) + /* quirks */ #define DWMCI_QUIRK_DISABLE_SMU (1 << 0) @@ -134,7 +137,9 @@ struct dwmci_host { unsigned int version; unsigned int clock; unsigned int bus_hz; + unsigned int div; int dev_index; + int dev_id; int buswidth; u32 clksel_val; u32 fifoth_val; diff --git a/include/fdtdec.h b/include/fdtdec.h index 3196cf6..a7e6ee7 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -81,7 +81,7 @@ enum fdt_compat_id { COMPAT_SAMSUNG_EXYNOS_FIMD, /* Exynos Display controller */ COMPAT_SAMSUNG_EXYNOS_MIPI_DSI, /* Exynos mipi dsi */ COMPAT_SAMSUNG_EXYNOS5_DP, /* Exynos Display port controller */ - COMPAT_SAMSUNG_EXYNOS5_DWMMC, /* Exynos5 DWMMC controller */ + COMPAT_SAMSUNG_EXYNOS_DWMMC, /* Exynos DWMMC controller */ COMPAT_SAMSUNG_EXYNOS_MMC, /* Exynos MMC controller */ COMPAT_SAMSUNG_EXYNOS_SERIAL, /* Exynos UART */ COMPAT_MAXIM_MAX77686_PMIC, /* MAX77686 PMIC */ @@ -92,6 +92,8 @@ enum fdt_compat_id { COMPAT_SAMSUNG_EXYNOS5_I2C, /* Exynos5 High Speed I2C Controller */ COMPAT_SANDBOX_HOST_EMULATION, /* Sandbox emulation of a function */ COMPAT_SANDBOX_LCD_SDL, /* Sandbox LCD emulation with SDL */ + COMPAT_TI_TPS65090, /* Texas Instrument TPS65090 */ + COMPAT_NXP_PTN3460, /* NXP PTN3460 DP/LVDS bridge */ COMPAT_COUNT, }; diff --git a/include/initcall.h b/include/initcall.h index 2378077..65f67dc 100644 --- a/include/initcall.h +++ b/include/initcall.h @@ -6,4 +6,4 @@ typedef int (*init_fnc_t)(void); -int initcall_run_list(init_fnc_t init_sequence[]); +int initcall_run_list(const init_fnc_t init_sequence[]); diff --git a/include/mmc.h b/include/mmc.h index a3a100b..f46572e 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -32,15 +32,13 @@ #define MMC_VERSION_4_41 (MMC_VERSION_MMC | 0x429) #define MMC_VERSION_4_5 (MMC_VERSION_MMC | 0x405) -#define MMC_MODE_HS 0x001 -#define MMC_MODE_HS_52MHz 0x010 -#define MMC_MODE_4BIT 0x100 -#define MMC_MODE_8BIT 0x200 -#define MMC_MODE_SPI 0x400 -#define MMC_MODE_HC 0x800 - -#define MMC_MODE_MASK_WIDTH_BITS (MMC_MODE_4BIT | MMC_MODE_8BIT) -#define MMC_MODE_WIDTH_BITS_SHIFT 8 +#define MMC_MODE_HS (1 << 0) +#define MMC_MODE_HS_52MHz (1 << 1) +#define MMC_MODE_4BIT (1 << 2) +#define MMC_MODE_8BIT (1 << 3) +#define MMC_MODE_SPI (1 << 4) +#define MMC_MODE_HC (1 << 5) +#define MMC_MODE_DDR_52MHz (1 << 6) #define SD_DATA_4BIT 0x00040000 @@ -100,9 +98,6 @@ #define SD_HIGHSPEED_BUSY 0x00020000 #define SD_HIGHSPEED_SUPPORTED 0x00020000 -#define MMC_HS_TIMING 0x00000100 -#define MMC_HS_52MHZ 0x2 - #define OCR_BUSY 0x80000000 #define OCR_HCS 0x40000000 #define OCR_VOLTAGE_MASK 0x007FFF80 @@ -178,10 +173,16 @@ #define EXT_CSD_CARD_TYPE_26 (1 << 0) /* Card can run at 26MHz */ #define EXT_CSD_CARD_TYPE_52 (1 << 1) /* Card can run at 52MHz */ +#define EXT_CSD_CARD_TYPE_DDR_1_8V (1 << 2) +#define EXT_CSD_CARD_TYPE_DDR_1_2V (1 << 3) +#define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \ + | EXT_CSD_CARD_TYPE_DDR_1_2V) #define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ #define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */ +#define EXT_CSD_DDR_BUS_WIDTH_4 5 /* Card is in 4 bit DDR mode */ +#define EXT_CSD_DDR_BUS_WIDTH_8 6 /* Card is in 8 bit DDR mode */ #define EXT_CSD_BOOT_ACK_ENABLE (1 << 6) #define EXT_CSD_BOOT_PARTITION_ENABLE (1 << 3) diff --git a/include/power/max77693_pmic.h b/include/power/max77693_pmic.h index 616d051..3d59e59 100644 --- a/include/power/max77693_pmic.h +++ b/include/power/max77693_pmic.h @@ -10,8 +10,6 @@ #include <power/power_chrg.h> -enum {CHARGER_ENABLE, CHARGER_DISABLE}; - #define CHARGER_MIN_CURRENT 200 #define CHARGER_MAX_CURRENT 2000 diff --git a/include/power/max8997_pmic.h b/include/power/max8997_pmic.h index 74c5d54..728d60a 100644 --- a/include/power/max8997_pmic.h +++ b/include/power/max8997_pmic.h @@ -170,7 +170,6 @@ enum { #define SAFEOUT_3_30V 0x03 /* Charger */ -enum {CHARGER_ENABLE, CHARGER_DISABLE}; #define DETBAT (1 << 2) #define MBCICHFCSET (1 << 4) #define MBCHOSTEN (1 << 6) diff --git a/include/power/pmic.h b/include/power/pmic.h index 8f282dd..a62e6c9 100644 --- a/include/power/pmic.h +++ b/include/power/pmic.h @@ -17,6 +17,11 @@ enum { I2C_PMIC, I2C_NUM, }; enum { PMIC_READ, PMIC_WRITE, }; enum { PMIC_SENSOR_BYTE_ORDER_LITTLE, PMIC_SENSOR_BYTE_ORDER_BIG, }; +enum { + PMIC_CHARGER_DISABLE, + PMIC_CHARGER_ENABLE, +}; + struct p_i2c { unsigned char addr; unsigned char *buf; diff --git a/include/power/tps65090_pmic.h b/include/power/tps65090_pmic.h new file mode 100644 index 0000000..dcf99c9 --- /dev/null +++ b/include/power/tps65090_pmic.h @@ -0,0 +1,73 @@ +/* + * Copyright (c) 2012 The Chromium OS Authors. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __TPS65090_PMIC_H_ +#define __TPS65090_PMIC_H_ + +/* I2C device address for TPS65090 PMU */ +#define TPS65090_I2C_ADDR 0x48 + +enum { + /* Status register fields */ + TPS65090_ST1_OTC = 1 << 0, + TPS65090_ST1_OCC = 1 << 1, + TPS65090_ST1_STATE_SHIFT = 4, + TPS65090_ST1_STATE_MASK = 0xf << TPS65090_ST1_STATE_SHIFT, +}; + +/** + * Enable FET + * + * @param fet_id FET ID, value between 1 and 7 + * @return 0 on success, non-0 on failure + */ +int tps65090_fet_enable(unsigned int fet_id); + +/** + * Disable FET + * + * @param fet_id FET ID, value between 1 and 7 + * @return 0 on success, non-0 on failure + */ +int tps65090_fet_disable(unsigned int fet_id); + +/** + * Is FET enabled? + * + * @param fet_id FET ID, value between 1 and 7 + * @return 1 enabled, 0 disabled, negative value on failure + */ +int tps65090_fet_is_enabled(unsigned int fet_id); + +/** + * Enable / disable the battery charger + * + * @param enable 0 to disable charging, non-zero to enable + */ +int tps65090_set_charge_enable(int enable); + +/** + * Check whether we have enabled battery charging + * + * @return 1 if enabled, 0 if disabled + */ +int tps65090_get_charging(void); + +/** + * Return the value of the status register + * + * @return status register value, or -1 on error + */ +int tps65090_get_status(void); + +/** + * Initialize the TPS65090 PMU. + * + * @return 0 on success, non-0 on failure + */ +int tps65090_init(void); + +#endif /* __TPS65090_PMIC_H_ */ |