summaryrefslogtreecommitdiff
path: root/lib_i386/ic/sc520_asm.S
diff options
context:
space:
mode:
Diffstat (limited to 'lib_i386/ic/sc520_asm.S')
-rw-r--r--lib_i386/ic/sc520_asm.S530
1 files changed, 0 insertions, 530 deletions
diff --git a/lib_i386/ic/sc520_asm.S b/lib_i386/ic/sc520_asm.S
deleted file mode 100644
index 72110c4..0000000
--- a/lib_i386/ic/sc520_asm.S
+++ /dev/null
@@ -1,530 +0,0 @@
-/*
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* This file is largely based on code obtned from AMD. AMD's original
- * copyright is included below
- */
-
-/*
- * =============================================================================
- *
- * Copyright 1999 Advanced Micro Devices, Inc.
- *
- * This software is the property of Advanced Micro Devices, Inc (AMD) which
- * specifically grants the user the right to modify, use and distribute this
- * software provided this COPYRIGHT NOTICE is not removed or altered. All
- * other rights are reserved by AMD.
- *
- * THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY
- * OF ANY KIND INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT OF
- * THIRD-PARTY INTELLECTUAL PROPERTY, OR FITNESS FOR ANY PARTICULAR PURPOSE.
- * IN NO EVENT SHALL AMD OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER
- * (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS
- * INTERRUPTION, LOSS OF INFORMAITON) ARISING OUT OF THE USE OF OR INABILITY
- * TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGES. BECAUSE SOME JURSIDICTIONS PROHIBIT THE EXCLUSION OR
- * LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE
- * LIMITATION MAY NOT APPLY TO YOU.
- *
- * AMD does not assume any responsibility for any errors that may appear in
- * the Materials nor any responsibility to support or update the Materials.
- * AMD retains the right to make changes to its test specifications at any
- * time, without notice.
- *
- * So that all may benefit from your experience, please report any problems
- * or suggestions about this software back to AMD. Please include your name,
- * company, telephone number, AMD product requiring support and question or
- * problem encountered.
- *
- * Advanced Micro Devices, Inc. Worldwide support and contact
- * Embedded Processor Division information available at:
- * Systems Engineering epd.support@amd.com
- * 5204 E. Ben White Blvd. -or-
- * Austin, TX 78741 http://www.amd.com/html/support/techsup.html
- * ============================================================================
- */
-
-
-/*******************************************************************************
- * AUTHOR : Buddy Fey - Original.
- *******************************************************************************
- */
-
-
-/*******************************************************************************
- * FUNCTIONAL DESCRIPTION:
- * This routine is called to autodetect the geometry of the DRAM.
- *
- * This routine is called to determine the number of column bits for the DRAM
- * devices in this external bank. This routine assumes that the external bank
- * has been configured for an 11-bit column and for 4 internal banks. This gives
- * us the maximum address reach in memory. By writing a test value to the max
- * address and locating where it aliases to, we can determine the number of valid
- * column bits.
- *
- * This routine is called to determine the number of internal banks each DRAM
- * device has. The external bank (under test) is configured for maximum reach
- * with 11-bit columns and 4 internal banks. This routine will write to a max
- * address (BA1 and BA0 = 1) and then read from an address with BA1=0 to see if
- * that column is a "don't care". If BA1 does not affect write/read of data,
- * then this device has only 2 internal banks.
- *
- * This routine is called to determine the ending address for this external
- * bank of SDRAM. We write to a max address with a data value and then disable
- * row address bits looking for "don't care" locations. Each "don't care" bit
- * represents a dividing of the maximum density (128M) by 2. By dividing the
- * maximum of 32 4M chunks in an external bank down by all the "don't care" bits
- * determined during sizing, we set the proper density.
- *
- * WARNINGS.
- * bp must be preserved because it is used for return linkage.
- *
- * EXIT
- * nothing returned - but the memory subsystem is enabled
- *******************************************************************************
- */
-
-.section .text
-.equ DRCCTL, 0x0fffef010 /* DRAM control register */
-.equ DRCTMCTL, 0x0fffef012 /* DRAM timing control register */
-.equ DRCCFG, 0x0fffef014 /* DRAM bank configuration register */
-.equ DRCBENDADR, 0x0fffef018 /* DRAM bank ending address register */
-.equ ECCCTL, 0x0fffef020 /* DRAM ECC control register */
-.equ DBCTL, 0x0fffef040 /* DRAM buffer control register */
-
-.equ CACHELINESZ, 0x00000010 /* size of our cache line (read buffer) */
-.equ COL11_ADR, 0x0e001e00 /* 11 col addrs */
-.equ COL10_ADR, 0x0e000e00 /* 10 col addrs */
-.equ COL09_ADR, 0x0e000600 /* 9 col addrs */
-.equ COL08_ADR, 0x0e000200 /* 8 col addrs */
-.equ ROW14_ADR, 0x0f000000 /* 14 row addrs */
-.equ ROW13_ADR, 0x07000000 /* 13 row addrs */
-.equ ROW12_ADR, 0x03000000 /* 12 row addrs */
-.equ ROW11_ADR, 0x01000000 /* 11 row addrs/also bank switch */
-.equ ROW10_ADR, 0x00000000 /* 10 row addrs/also bank switch */
-.equ COL11_DATA, 0x0b0b0b0b /* 11 col addrs */
-.equ COL10_DATA, 0x0a0a0a0a /* 10 col data */
-.equ COL09_DATA, 0x09090909 /* 9 col data */
-.equ COL08_DATA, 0x08080808 /* 8 col data */
-.equ ROW14_DATA, 0x3f3f3f3f /* 14 row data (MASK) */
-.equ ROW13_DATA, 0x1f1f1f1f /* 13 row data (MASK) */
-.equ ROW12_DATA, 0x0f0f0f0f /* 12 row data (MASK) */
-.equ ROW11_DATA, 0x07070707 /* 11 row data/also bank switch (MASK) */
-.equ ROW10_DATA, 0xaaaaaaaa /* 10 row data/also bank switch (MASK) */
-
-
- /*
- * initialize dram controller registers
- */
-.globl mem_init
-mem_init:
- xorw %ax,%ax
- movl $DBCTL, %edi
-fs movb %al, (%edi) /* disable write buffer */
-
- movl $ECCCTL, %edi
-fs movb %al, (%edi) /* disable ECC */
-
- movl $DRCTMCTL, %edi
- movb $0x1E,%al /* Set SDRAM timing for slowest */
-fs movb %al, (%edi)
-
- /*
- * setup loop to do 4 external banks starting with bank 3
- */
- movl $0xff000000,%eax /* enable last bank and setup */
- movl $DRCBENDADR, %edi /* ending address register */
-fs movl %eax, (%edi)
-
- movl $DRCCFG, %edi /* setup */
- movw $0xbbbb,%ax /* dram config register for */
-fs movw %ax, (%edi)
-
- /*
- * issue a NOP to all DRAMs
- */
- movl $DRCCTL, %edi /* setup DRAM control register with */
- movb $0x1,%al /* Disable refresh,disable write buffer */
-fs movb %al, (%edi)
- movl $CACHELINESZ, %esi /* just a dummy address to write for */
-fs movw %ax, (%esi)
- /*
- * delay for 100 usec? 200?
- * ******this is a cludge for now *************
- */
- movw $100,%cx
-sizdelay:
- loop sizdelay /* we need 100 usec here */
- /***********************************************/
-
- /*
- * issue all banks precharge
- */
- movb $0x2,%al /* All banks precharge */
-fs movb %al, (%edi)
-fs movw %ax, (%esi)
-
- /*
- * issue 2 auto refreshes to all banks
- */
- movb $0x4,%al /* Auto refresh cmd */
-fs movb %al, (%edi)
- movw $2,%cx
-refresh1:
-fs movw %ax, (%esi)
- loop refresh1
-
- /*
- * issue LOAD MODE REGISTER command
- */
- movb $0x3,%al /* Load mode register cmd */
-fs movb %al, (%edi)
-fs movw %ax, (%esi)
-
- /*
- * issue 8 more auto refreshes to all banks
- */
- movb $0x4,%al /* Auto refresh cmd */
-fs movb %al, (%edi)
- movw $8,%cx
-refresh2:
-fs movw %ax, (%esi)
- loop refresh2
-
- /*
- * set control register to NORMAL mode
- */
- movb $0x0,%al /* Normal mode value */
-fs movb %al, (%edi)
-
- /*
- * size dram starting with external bank 3 moving to external bank 0
- */
- movl $0x3,%ecx /* start with external bank 3 */
-
-nextbank:
-
- /*
- * write col 11 wrap adr
- */
- movl $COL11_ADR, %esi /* set address to max col (11) wrap addr */
- movl $COL11_DATA, %eax /* pattern for max supported columns(11) */
-fs movl %eax, (%esi) /* write max col pattern at max col adr */
-fs movl (%esi), %ebx /* optional read */
- cmpl %ebx,%eax /* to verify write */
- jnz bad_ram /* this ram is bad */
- /*
- * write col 10 wrap adr
- */
-
- movl $COL10_ADR, %esi /* set address to 10 col wrap address */
- movl $COL10_DATA, %eax /* pattern for 10 col wrap */
-fs movl %eax, (%esi) /* write 10 col pattern @ 10 col wrap adr */
-fs movl (%esi), %ebx /* optional read */
- cmpl %ebx,%eax /* to verify write */
- jnz bad_ram /* this ram is bad */
- /*
- * write col 9 wrap adr
- */
- movl $COL09_ADR, %esi /* set address to 9 col wrap address */
- movl $COL09_DATA, %eax /* pattern for 9 col wrap */
-fs movl %eax, (%esi) /* write 9 col pattern @ 9 col wrap adr */
-fs movl (%esi), %ebx /* optional read */
- cmpl %ebx,%eax /* to verify write */
- jnz bad_ram /* this ram is bad */
- /*
- * write col 8 wrap adr
- */
- movl $COL08_ADR, %esi /* set address to min(8) col wrap address */
- movl $COL08_DATA, %eax /* pattern for min (8) col wrap */
-fs movl %eax, (%esi) /* write min col pattern @ min col adr */
-fs movl (%esi), %ebx /* optional read */
- cmpl %ebx,%eax /* to verify write */
- jnz bad_ram /* this ram is bad */
- /*
- * write row 14 wrap adr
- */
- movl $ROW14_ADR, %esi /* set address to max row (14) wrap addr */
- movl $ROW14_DATA, %eax /* pattern for max supported rows(14) */
-fs movl %eax, (%esi) /* write max row pattern at max row adr */
-fs movl (%esi), %ebx /* optional read */
- cmpl %ebx,%eax /* to verify write */
- jnz bad_ram /* this ram is bad */
- /*
- * write row 13 wrap adr
- */
- movl $ROW13_ADR, %esi /* set address to 13 row wrap address */
- movl $ROW13_DATA, %eax /* pattern for 13 row wrap */
-fs movl %eax, (%esi) /* write 13 row pattern @ 13 row wrap adr */
-fs movl (%esi), %ebx /* optional read */
- cmpl %ebx,%eax /* to verify write */
- jnz bad_ram /* this ram is bad */
- /*
- * write row 12 wrap adr
- */
- movl $ROW12_ADR, %esi /* set address to 12 row wrap address */
- movl $ROW12_DATA, %eax /* pattern for 12 row wrap */
-fs movl %eax, (%esi) /* write 12 row pattern @ 12 row wrap adr */
-fs movl (%esi), %ebx /* optional read */
- cmpl %ebx,%eax /* to verify write */
- jnz bad_ram /* this ram is bad */
- /*
- * write row 11 wrap adr
- */
- movl $ROW11_ADR, %edi /* set address to 11 row wrap address */
- movl $ROW11_DATA, %eax /* pattern for 11 row wrap */
-fs movl %eax, (%edi) /* write 11 row pattern @ 11 row wrap adr */
-fs movl (%edi), %ebx /* optional read */
- cmpl %ebx,%eax /* to verify write */
- jnz bad_ram /* this ram is bad */
- /*
- * write row 10 wrap adr --- this write is really to determine number of banks
- */
- movl $ROW10_ADR, %edi /* set address to 10 row wrap address */
- movl $ROW10_DATA, %eax /* pattern for 10 row wrap (AA) */
-fs movl %eax, (%edi) /* write 10 row pattern @ 10 row wrap adr */
-fs movl (%edi), %ebx /* optional read */
- cmpl %ebx,%eax /* to verify write */
- jnz bad_ram /* this ram is bad */
- /*
- * read data @ row 12 wrap adr to determine * banks,
- * and read data @ row 14 wrap adr to determine * rows.
- * if data @ row 12 wrap adr is not AA, 11 or 12 we have bad RAM.
- * if data @ row 12 wrap == AA, we only have 2 banks, NOT 4
- * if data @ row 12 wrap == 11 or 12, we have 4 banks,
- */
- xorw %di,%di /* value for 2 banks in DI */
-fs movl (%esi), %ebx /* read from 12 row wrap to check banks
- * (esi is setup from the write to row 12 wrap) */
- cmpl %ebx,%eax /* check for AA pattern (eax holds the aa pattern) */
- jz only2 /* if pattern == AA, we only have 2 banks */
-
- /* 4 banks */
-
- movw $8,%di /* value for 4 banks in DI (BNK_CNT bit) */
- cmpl $ROW11_DATA, %ebx /* only other legitimate values are 11 */
- jz only2
- cmpl $ROW12_DATA, %ebx /* and 12 */
- jnz bad_ram /* its bad if not 11 or 12! */
-
- /* fall through */
-only2:
- /*
- * validate row mask
- */
- movl $ROW14_ADR, %esi /* set address back to max row wrap addr */
-fs movl (%esi), %eax /* read actual number of rows @ row14 adr */
-
- cmpl $ROW11_DATA, %eax /* row must be greater than 11 pattern */
- jb bad_ram
-
- cmpl $ROW14_DATA, %eax /* and row must be less than 14 pattern */
- ja bad_ram
-
- cmpb %ah,%al /* verify all 4 bytes of dword same */
- jnz bad_ram
- movl %eax,%ebx
- shrl $16,%ebx
- cmpw %bx,%ax
- jnz bad_ram
- /*
- * read col 11 wrap adr for real column data value
- */
- movl $COL11_ADR, %esi /* set address to max col (11) wrap addr */
-fs movl (%esi), %eax /* read real col number at max col adr */
- /*
- * validate column data
- */
- cmpl $COL08_DATA, %eax /* col must be greater than 8 pattern */
- jb bad_ram
-
- cmpl $COL11_DATA, %eax /* and row must be less than 11 pattern */
- ja bad_ram
-
- subl $COL08_DATA, %eax /* normalize column data to zero */
- jc bad_ram
- cmpb %ah,%al /* verify all 4 bytes of dword equal */
- jnz bad_ram
- movl %eax,%edx
- shrl $16,%edx
- cmpw %dx,%ax
- jnz bad_ram
- /*
- * merge bank and col data together
- */
- addw %di,%dx /* merge of bank and col info in dl */
- /*
- * fix ending addr mask based upon col info
- */
- movb $3,%al
- subb %dh,%al /* dh contains the overflow from the bank/col merge */
- movb %bl,%dh /* bl contains the row mask (aa, 07, 0f, 1f or 3f) */
- xchgw %cx,%ax /* cx = ax = 3 or 2 depending on 2 or 4 bank device */
- shrb %cl,%dh /* */
- incb %dh /* ending addr is 1 greater than real end */
- xchgw %cx,%ax /* cx is bank number again */
- /*
- * issue all banks precharge
- */
-bad_reint:
- movl $DRCCTL, %esi /* setup DRAM control register with */
- movb $0x2,%al /* All banks precharge */
-fs movb %al, (%esi)
- movl $CACHELINESZ, %esi /* address to init read buffer */
-fs movw %ax, (%esi)
-
- /*
- * update ENDING ADDRESS REGISTER
- */
- movl $DRCBENDADR, %edi /* DRAM ending address register */
- movl %ecx,%ebx
- addl %ebx, %edi
-fs movb %dh, (%edi)
- /*
- * update CONFIG REGISTER
- */
- xorb %dh,%dh
- movw $0x00f,%bx
- movw %cx,%ax
- shlw $2,%ax
- xchgw %cx,%ax
- shlw %cl,%dx
- shlw %cl,%bx
- notw %bx
- xchgw %cx,%ax
- movl $DRCCFG, %edi
-fs mov (%edi), %ax
- andw %bx,%ax
- orw %dx,%ax
-fs movw %ax, (%edi)
- jcxz cleanup
-
- decw %cx
- movl %ecx,%ebx
- movl $DRCBENDADR, %edi /* DRAM ending address register */
- movb $0xff,%al
- addl %ebx, %edi
-fs movb %al, (%edi)
- /*
- * set control register to NORMAL mode
- */
- movl $DRCCTL, %esi /* setup DRAM control register with */
- movb $0x0,%al /* Normal mode value */
-fs movb %al, (%esi)
- movl $CACHELINESZ, %esi /* address to init read buffer */
-fs movw %ax, (%esi)
- jmp nextbank
-
-cleanup:
- movl $DRCBENDADR, %edi /* DRAM ending address register */
- movw $4,%cx
- xorw %ax,%ax
-cleanuplp:
-fs movb (%edi), %al
- orb %al,%al
- jz emptybank
-
- addb %ah,%al
- jns nottoomuch
-
- movb $0x7f,%al
-nottoomuch:
- movb %al,%ah
- orb $0x80,%al
-fs movb %al, (%edi)
-emptybank:
- incl %edi
- loop cleanuplp
-
-#if defined(CFG_SDRAM_CAS_LATENCY_2T) || defined(CFG_SDRAM_CAS_LATENCY_3T)
- /* set the CAS latency now since it is hard to do
- * when we run from the RAM */
- movl $DRCTMCTL, %edi /* DRAM timing register */
- movb (%edi), %al
-#ifdef CFG_SDRAM_CAS_LATENCY_2T
- andb $0xef, %al
-#endif
-#ifdef CFG_SDRAM_CAS_LATENCY_3T
- orb $0x10, %al
-#endif
- movb %al, (%edi)
-#endif
- movl $DRCCTL, %edi /* DRAM Control register */
- movb $0x3,%al /* Load mode register cmd */
-fs movb %al, (%edi)
-fs movw %ax, (%esi)
-
-
- movl $DRCCTL, %edi /* DRAM Control register */
- movb $0x18,%al /* Enable refresh and NORMAL mode */
-fs movb %al, (%edi)
-
- jmp dram_done
-
-bad_ram:
- xorl %edx,%edx
- xorl %edi,%edi
- jmp bad_reint
-
-dram_done:
-
- /* readback DRCBENDADR and return the number
- * of available ram bytes in %eax */
-
- movl $DRCBENDADR, %edi /* DRAM ending address register */
-
- movl (%edi), %eax
- movl %eax, %ecx
- andl $0x80000000, %ecx
- jz bank2
- andl $0x7f000000, %eax
- shrl $2, %eax
- movl %eax, %ebx
-
-bank2: movl (%edi), %eax
- movl %eax, %ecx
- andl $0x00800000, %ecx
- jz bank1
- andl $0x007f0000, %eax
- shll $6, %eax
- movl %eax, %ebx
-
-bank1: movl (%edi), %eax
- movl %eax, %ecx
- andl $0x00008000, %ecx
- jz bank0
- andl $0x00007f00, %eax
- shll $14, %eax
- movl %eax, %ebx
-
-bank0: movl (%edi), %eax
- movl %eax, %ecx
- andl $0x00000080, %ecx
- jz done
- andl $0x0000007f, %eax
- shll $22, %eax
- movl %eax, %ebx
-
-done: movl %ebx, %eax
-
- jmp *%ebp