index
:
u-boot-fsl-qoriq
master
scalys
Freescale u-boot tree with Scalys patches
www-data
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
arch
/
arm
/
cpu
/
arm926ejs
/
mx28
Age
Commit message (
Expand
)
Author
2012-09-01
mxs: reorganize source directory for easy sharing of code in i.MXS SoCs
Otavio Salvador
2012-09-01
MX28: use a clear name for DDR2 initialization
Otavio Salvador
2012-09-01
MX28: extend print_cpuinfo() to use chip information
Otavio Salvador
2012-07-07
ARM: mx28: Remove CONFIG_ARCH_CPU_INIT
Fabio Estevam
2012-07-07
i.MX28: Add function to adjust memory parameters
Marek Vasut
2012-05-15
i.MX28: Avoid redefining serial_put[cs]()
Marek Vasut
2012-05-15
i.MX28: Add battery boot components to SPL
Marek Vasut
2012-05-15
i.MX28: Reorder battery status functions in SPL
Marek Vasut
2012-05-15
i.MX28: Add LRADC init to i.MX28 SPL
Marek Vasut
2012-05-15
i.MX28: Shut down the LCD controller before reset
Marek Vasut
2012-05-15
i.MX28: Implement boot pads sampling and reporting
Marek Vasut
2012-05-15
i.MX28: Improve passing of data from SPL to U-Boot
Marek Vasut
2012-05-15
i.MX28: Add delay after CPU bypass is cleared
Marek Vasut
2012-05-15
Revert "i.MX28: Enable additional DRAM address bits"
Marek Vasut
2012-04-16
DMA: Split the APBH DMA init into block and channel init
Marek Vasut
2012-03-29
i.MX28: Enable caches by default
Marek Vasut
2012-03-27
i.MX28: Drop __naked function from spl_mem_init
Marek Vasut
2012-03-27
i.MX28: Make the stabilization delays shorter
Marek Vasut
2012-03-27
i.MX28: Enable additional DRAM address bits
Marek Vasut
2012-03-26
Fix erroneous 32-bit access to hw_clkctrl_frac0 and hw_clkctrl_frac1 registers
Robert Delien
2012-03-26
Renamed mx28_register to mx28_register_32 to prepare for mx28_register_8
Robert Delien
2012-03-26
i.MX28: Reformat the DRAM memory configuration data
Marek Vasut
2012-03-26
i.mx28: Replaced magic numbers for scratch register addresses with register d...
Robert Delien
2012-02-27
MX28: Fix get_timer() / get_tbclk() issue
Marek Vasut
2012-02-27
mx28: fix SPL code to make USB booting work
Matthias Fuchs
2012-02-27
i.MX28: Fix VDDIO and VDDA setup
Marek Vasut
2012-02-12
mx28: Show CPU frequency
Fabio Estevam
2012-01-16
mx28: fix clearing of IRQs in power init
Zach Sadecki
2012-01-16
mx28: Let dram_init be common for mx28
Fabio Estevam
2012-01-16
mx28: Let imx_get_mac_from_fuse be common for mx28
Fabio Estevam
2012-01-16
mx28: remove omap specific config options
Veli-Pekka Peltola
2011-12-09
M28: Cleanup memsize.o OOT build
Marek Vasut
2011-12-09
i.MX28: Move SPL to arch/arm/cpu/arm926ejs/mx28
Marek Vasut
2011-11-11
iMX28: Fix ARM vector handling
Marek Vasut
2011-11-11
iMX28: Add GPIO control
Marek Vasut
2011-11-11
iMX28: Add PINMUX control
Marek Vasut
2011-11-11
iMX28: Initial support for iMX28 CPU
Marek Vasut