summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2011-10-27kirkwood_spi: add dummy spi_init()Michael Walle
The spi_init() function is missing. Add it. Signed-off-by: Michael Walle <michael@walle.cc>
2011-10-27gpio: mvmfp: reduce include platform fileLei Wen
Build pass with following config: dkb_config aspenite_config Signed-off-by: Lei Wen <leiwen@marvell.com>
2011-10-27serial: reduce include platform file for marvell chipLei Wen
Build pass with following config: dkb_config aspenite_config edminiv2_config openrd_ultimate_config sheevaplug_config mv88f6281gtw_ge_config rd6281a_config guruplug_config km_kirkwood_config Signed-off-by: Lei Wen <leiwen@marvell.com> Acked-by: Wolfgang Denk <wd@denx.de>
2011-10-27ARM: kirkwood: reduce dependence of including platform fileLei Wen
For files like the drivers/serial/serial.c, it must include the platform file, as the CONFIG_SYS_NS16550_COM1 must reference to the definition in the platform definition files. Include the platform definition file in the config file, so that it would decouple the dependence for the driver files. Signed-off-by: Lei Wen <leiwen@marvell.com>
2011-10-27SPI: Add SPI driver support for Marvell Armada100Ajay Bhargav
This patch provides support for SPI emulated over SSP for Marvell Armada100 SOC. Signed-off-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
2011-10-27misc: pmic: drop old Freescale's pmic driverStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-10-27misc: pmic: addI2C support to pmic_fsl driverStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-10-27misc: pmic: use I2C_SET_BUS in pmic I2CStefano Babic
Instead of using directly the i2c_set_bus() function, the I2C_SET_BUS macro must be used to avoid build errors for targets without multibus I2C. Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-10-27RTC: Switch mc13783 to generic pmic codeStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2011-10-27misc: pmic: Freescale PMIC switches to generic PMIC driverStefano Babic
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
2011-10-27misc:pmic:max8998 MAX8998 support at a new PMIC driver.Łukasz Majewski
This commit adds support for MAX8998 PMIC driver. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
2011-10-27misc:pmic:core New generic PMIC driverŁukasz Majewski
I2C or SPI PMIC devices can be accessed. Separate files: pmic_i2c.c and pmic_spi.c are responsible for handling transmission over I2C or SPI bus. New flags: CONFIG_PMIC - enable PMIC general device. CONFIG_PMIC_I2C/SPI - specify the interface to be used. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
2011-10-27I2C: Add i2c_get/set_speed() to mxc_i2c.cMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Heiko Schocher <hs@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
2011-10-27tegra2: Enable MMC for SeaboardTom Warren
This adds the required GPIO and pinmux configuration to make eMMC / SD work on Seaboard. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Tom Warren <twarren@nvidia.com>
2011-10-27tegra2: Add more clock functionsSimon Glass
This adds most of the clock functions required by board and driver code: -query and adjust peripheral clocks -query and adjust PLLs -reset and enable control These functions are plumbed in as required. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Tom Warren <twarren@nvidia.com>
2011-10-26altera_tse: Fix return of eth_device's recv() callbackJoachim Foerster
It seems to be good practice to return the number of received bytes in the eth_device's recv() callback, here: tse_eth_rx(). Signed-off-by: Joachim Foerster <joachim.foerster@missinglinkelectronics.com>
2011-10-26altera_tse: m88e1111s: Honor device flags regarding PHY interface modeJoachim Foerster
Note: This is kind of guess work. The current code is preserved for all RGMII related modes. It is different for flags=0 (GMII) and flags=5 (SGMII). The last case, SGMII, is successfully tested on Altera's Terasic DE4. Signed-off-by: Joachim Foerster <joachim.foerster@missinglinkelectronics.com>
2011-10-26altera_tse: Add support for dedicated descriptor memoryJoachim Foerster
Signed-off-by: Joachim Foerster <joachim.foerster@missinglinkelectronics.com>
2011-10-26altera_tse: Fix SGDMA reset triggeringJoachim Foerster
The SW_RESET needs to be set instead of being masked out! Signed-off-by: Joachim Foerster <joachim.foerster@missinglinkelectronics.com>
2011-10-26altera_tse: Clear SGDMA's RUN bit in async transfer, like in sync caseJoachim Foerster
Signed-off-by: Joachim Foerster <joachim.foerster@missinglinkelectronics.com>
2011-10-25mmc: dcache: allocate cache aligned buffers for ext_csdAnton staaf
Currently the mmc_change_freq and mmc_startup functions allocates buffers on the stack that are passed down to the MMC device driver. These buffers could be unaligned to the L1 dcache line size. This causes problems when using DMA and with caches enabled. This patch correctly cache alignes the buffers used for reading the ext_csd data from an MMC device. Signed-off-by: Anton Staaf <robotboy@chromium.org> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
2011-10-25mmc: dcache: allocate cache aligned buffer for scr and switch_statusAnton staaf
Currently the sd_change_freq function allocates two buffers on the stack that it passes down to the MMC device driver. These buffers could be unaligned to the L1 dcache line size. This causes problems when using DMA and with caches enabled. This patch correctly cache alignes the buffers used for reading the scr register and switch status values from an MMC device. Change-Id: Ifa8414f572ef907681bd2d5ff3950285a215357d Signed-off-by: Anton Staaf <robotboy@chromium.org> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-10-23net: sc589: drop unused !NET_MULTI driverMike Frysinger
No boards appear to use this driver, and it doesn't support NET_MULTI, so punt the old driver. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-23net: s3c4510b_eth: drop unused !NET_MULTI driverMike Frysinger
No boards appear to use this driver, and it doesn't support NET_MULTI, so punt the old driver. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-23net: ns9750: drop !NET_MULTI driverMike Frysinger
Only one board uses this driver (ns9750dev), but the board doesn't seem to have an entry to actually build it in the Makefile/boards.cfg, so just delete net support from its board config. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-23net: enc28j60_lpc2292: drop unused !NET_MULTI driverMike Frysinger
Everyone seems to have converted to the new enc28j60 driver, so drop this older one which isn't used and doesn't support NET_MULTI. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-23net: emaclite: Move RX/TX ping pong initialization toMichal Simek
Init RX/TX ping pong directly from board not in the driver. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-23net: emaclite: Use unsigned long for baseaddrMichal Simek
Baseaddr should be unsigned long. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-23spi/eon: add support for new EON spi flash EN25Q32BShaohui Xie
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
2011-10-23NS16550: trivial code clean for checkpatchSimon Glass
This removes most checkpatch warnings from the ns16550 driver and its header. Signed-off-by: Simon Glass <sjg@chromium.org>
2011-10-23serial: uartlite: Fix compilation warningsMichal Simek
Do not setup userial_ports array as const because in uartlite_serial_putc is out_be32 which can't write to tx_fifo if is const. Warning log: serial_xuartlite.c: In function 'uartlite_serial_putc': serial_xuartlite.c:60: warning: initialization discards qualifiers from pointer target type serial_xuartlite.c: In function 'uartlite_serial_getc': serial_xuartlite.c:78: warning: initialization discards qualifiers from pointer target type serial_xuartlite.c: In function 'uartlite_serial_tstc': serial_xuartlite.c:87: warning: initialization discards qualifiers from pointer target type Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-21consolidate mdelay by providing a common function for all usersAnatolij Gustschin
There are several mdelay() definitions in the driver and board code. Remove them all and provide a common mdelay() in lib/time.c. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-10-21drivers: add the support for Silicon Image SATA controllerTang Yuantian
Add the Silicon Image series PCI Express to Serial ATA controller support, including Sil3132, Sil3131 and Sil3124. The SATA controller can be used to load kernel. The features list: - Supports 1-lane 2.5 Gbit/s PCI Express - Supports one/two/four independent Serial ATA channels - Supports Serial ATA Generation 2 transfer rate of 3.0 Gbit/s - Supports LBA28 and LBA48 Signed-off-by: Tang Yuantian <b29983@freescale.com> Signed-off-by: Aaron Williams <Aaron.Williams@cavium.com> Tested-by: Lan Chunhe <b25806@freescale.com>
2011-10-21gpio: Add PCA9698 40-bit I2C I/O portDirk Eibach
Signed-off-by: Dirk Eibach <eibach@gdsys.de>
2011-10-21serial: pl01x: drain PL01x FIFO before baudrate changeLinus Walleij
Not draining the FIFO and waiting for the UART to be non-busy before changing baudrate results in crap characters on the console, so let's wait for the FIFO to drain and the last character to be clocked out before we do that. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-10-21net: dc2114x: check for apropriate commandLinus Walleij
The code had two paths depending on whether the card was to be accessed from plain memory or the IO region. However the error path checks whether IO region was obtained - twice. Fix up the error path according to the probable intention. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-10-21ftgmac100: reset fix when supports wake on lanMacpaul Lin
This patch move the reset function from initialization to driver register procedure. Some embedded system supports wake on lan nowadays. On this kind of system, the ftgmac100 will be still supplied power after the system has been shut-down by Linux. Hence the register used by linux won't be clear when the system has been powered-off. The origin ftgmac100 driver in u-boot will only register driver and functions to network stack and won't reset the ftgmac100 hardware if the network won't be used during boot-up. This will lead ftgmac100 continue receiving packets and then might corrupt linux kernel when booting up. So we reorder the hardware reset function earlier to force the hardware to be reset whether it will be used or not. Signed-off-by: Macpaul Lin <macpaul@andestech.com>
2011-10-20powerpc/85xx: wait for alignment before resetting SERDES RX lanes (SERDES9)Timur Tabi
The work-around for P4080 erratum SERDES9 says that the SERDES receiver lanes should be reset after the XAUI starts tranmitting alignment signals. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-18fm: Don't allow disabling of FM1-DTSEC1Kumar Gala
The MDIO controller to talk to external PHYs is on FM1-DTSEC1 so don't allow disabling. If we disable it we end up powering the block down in the SoC and thus can't communicate to any external PHYs. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-18fm-eth: Don't mark the MAC we use for MDIO as disabled in device treeKumar Gala
FM1-DTSEC1's MAC was being marked as disabled if the port was not configured based on the SoC configuration. However we utilize the MAC interface for MDIO and thus should NOT mark it disabled. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-17Move timestamp and version files into 'generated' subdirSimon Glass
There is a rather subtle build problem where the build time stamp is not updated for out-of-tree builds if there exists an in-tree build which has a valid timestamp file. So if you do an in-tree build, then an out-of-tree build your timestamp will not change. The correct timestamp_autogenerated.h lives in the object tree, but it is not always found there. The source still lives in the source tree and when compiling version.h, it includes timestamp_autogenerated.h. Since the current directory is always searched first, this will come from the source tree rather than the object tree if it exists there. This affects dependency generation also, which means that common/cmd_version.o will not even be rebuilt if you have ever done an in-tree build. A similar problem exists with the version file. This change moves both files into the 'generated' subdir, which is already used for asm-offsets.h. Then timestamp.h and version.h are updated to include the files from there. There are other places where these generated files are included, but I cannot see why these don't just use the timestamp.h and version.h headers. So this change also tidies that up. I have tested this with in- and out-of-tree builds, but not SPL. I have looked at various other options for fixing this, including sed on the dep files, -I- and -include flags to gcc, but I don't think they can be made to work. Comments welcome. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-10-17sandbox: Add serial uartSimon Glass
This uart simply writes to stdout and reads from stdin. We might imagine instead buffering the data so that a test interface can check output and inject input. Signed-off-by: Simon Glass <sjg@chromium.org>
2011-10-17Replace space and tab checks with isblankJason Hobbs
These are various places I found that checked for conditions equivalent to isblank. Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com>
2011-10-17DM9000:Add a byte swap macro for dm9000 io operation.Jason Jin
commit a45dde2293c816138e53c26eca6fd0322583f9a6 changed the dm9000 direct register access to standard IO. This should work on the ColdFire platform as there are corresponding macros for the LE devices. But the hardware settings on some ColdFire boards had swapped the byte order which make the original macros such as out_le16 cannot work. To avoid changing the common io access code on ColdFire platform, the DM9000_BYTE_SWAPPED define was added to make the dm9000 use __raw* IO access on some ColdFire boards. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2011-10-17kw_gpio: fix error in kw_gpio_direction_inputHolger Brunck
The function kw_gpio_is_valid returns zero on success, so adapt the error check accordingly. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> cc: Dieter Kiermaier <dk-arm-linux@gmx.de>
2011-10-17Blackfin: bfin_spi: fix build error when DEBUG is definedMike Frysinger
The new debug() changes pointed out debug code that rotted a little. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-17video: Moving mx3fb.c to CONFIG_VIDEOHelmut Raiger
mx3fb.c was based on CONFIG_LCD and is moved by this patch to CONFIG_VIDEO, which has greater freedom in selecting videomodes even at runtime. This renders the accumulating list of display defines (CONFIG_DISPLAY_VBEST..., CONFIG_DISPLAY_C057...) obsolete as these may be setup through env variables: uboot> setenv mydisplay 'video=ctfb:x:240,y:320,depth:16,mode:0,pclk:185925, le:9,ri:17,up:7,lo:10,hs:1,vs:1,sync:100663296,vmode:0' uboot> setenv videomode ${mydisplay} This commit also fixes the board config files for qong and imx31_phycore boards as needed. The videomode settings of previously supported displays are added to CONFIG_EXTRA_ENV_SETTINGS now. CONFIG_SYS_MALLOC_LEN for imx31_phycore board is increased to make the frame buffer allocation working with the changed driver. Signed-off-by: Helmut Raiger <helmut.raiger@hale.at> Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2011-10-17MX5: Make IPU display output and pixel format configurableMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Stefano Babic <sbabic@denx.de> Tested-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-10-17VIDEO: MX5: export pix formatStefano Babic
Pixel format defines must be available for boards to set up the right display. Move them and export in a new file. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Anatolij Gustschin <agust@denx.de> CC: Marek Vasut <marek.vasut@gmail.com> Tested-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-10-17VIDEO: MX5: Switch MX5 to CONFIG_VIDEOStefano Babic
The framebuffer driver for MX5 is based on CONFIG_LCD. In the current implementation, there is a serious bug because the required memory is allocated before relocation, but the driver knows only later which is the resolution of the display. The patch switches the driver to CONFIG_VIDEO and the memory is allocated by the driver itself. We also need to switch the vision2 board code and config file in the same commit so that this commit will be bisectable. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Anatolij Gustschin <agust@denx.de> Tested-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
generated by cgit v0.10.2 at 2024-11-08 11:16:13 (GMT)