diff options
author | Takashi Iwai <tiwai@suse.de> | 2012-02-16 11:59:55 (GMT) |
---|---|---|
committer | Takashi Iwai <tiwai@suse.de> | 2012-02-16 11:59:55 (GMT) |
commit | c3c2c9e7ff3e38bd9ff5b721b6ae8634fce42802 (patch) | |
tree | 312fe94754dbd44828baf80f27ae72b46567b679 /sound/pci | |
parent | c29b3f6dd7798964d77199af4925be72a3a48349 (diff) | |
download | linux-fsl-qoriq-c3c2c9e7ff3e38bd9ff5b721b6ae8634fce42802.tar.xz |
ALSA: hda/realtek - Remove leftover static quirks for ALC260
Now we can clean up all static quirks for ALC260.
Also many codes in alc_quirks.c can be ripped off since they have been
used only by ALC260 static quirks.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Diffstat (limited to 'sound/pci')
-rw-r--r-- | sound/pci/hda/alc260_quirks.c | 432 | ||||
-rw-r--r-- | sound/pci/hda/alc_quirks.c | 301 | ||||
-rw-r--r-- | sound/pci/hda/patch_realtek.c | 48 |
3 files changed, 8 insertions, 773 deletions
diff --git a/sound/pci/hda/alc260_quirks.c b/sound/pci/hda/alc260_quirks.c deleted file mode 100644 index 305341f..0000000 --- a/sound/pci/hda/alc260_quirks.c +++ /dev/null @@ -1,432 +0,0 @@ -/* - * ALC260 quirk models - * included by patch_realtek.c - */ - -/* ALC260 models */ -enum { - ALC260_AUTO, - ALC260_BASIC, -#ifdef CONFIG_SND_DEBUG - ALC260_TEST, -#endif - ALC260_MODEL_LAST /* last tag */ -}; - -static const hda_nid_t alc260_dac_nids[1] = { - /* front */ - 0x02, -}; - -static const hda_nid_t alc260_adc_nids[1] = { - /* ADC0 */ - 0x04, -}; - -static const hda_nid_t alc260_adc_nids_alt[1] = { - /* ADC1 */ - 0x05, -}; - -/* NIDs used when simultaneous access to both ADCs makes sense. Note that - * alc260_capture_mixer assumes ADC0 (nid 0x04) is the first ADC. - */ -static const hda_nid_t alc260_dual_adc_nids[2] = { - /* ADC0, ADC1 */ - 0x04, 0x05 -}; - -#define ALC260_DIGOUT_NID 0x03 -#define ALC260_DIGIN_NID 0x06 - -static const struct hda_input_mux alc260_capture_source = { - .num_items = 4, - .items = { - { "Mic", 0x0 }, - { "Front Mic", 0x1 }, - { "Line", 0x2 }, - { "CD", 0x4 }, - }, -}; - -/* Acer TravelMate(/Extensa/Aspire) notebooks have similar configuration to - * the Fujitsu S702x, but jacks are marked differently. - */ -static const struct hda_input_mux alc260_acer_capture_sources[2] = { - { - .num_items = 4, - .items = { - { "Mic", 0x0 }, - { "Line", 0x2 }, - { "CD", 0x4 }, - { "Headphone", 0x5 }, - }, - }, - { - .num_items = 5, - .items = { - { "Mic", 0x0 }, - { "Line", 0x2 }, - { "CD", 0x4 }, - { "Headphone", 0x6 }, - { "Mixer", 0x5 }, - }, - }, -}; - -/* - * This is just place-holder, so there's something for alc_build_pcms to look - * at when it calculates the maximum number of channels. ALC260 has no mixer - * element which allows changing the channel mode, so the verb list is - * never used. - */ -static const struct hda_channel_mode alc260_modes[1] = { - { 2, NULL }, -}; - - -/* Mixer combinations - * - * basic: base_output + input + pc_beep + capture - * fujitsu: fujitsu + capture - * acer: acer + capture - */ - -static const struct snd_kcontrol_new alc260_base_output_mixer[] = { - HDA_CODEC_VOLUME("Front Playback Volume", 0x08, 0x0, HDA_OUTPUT), - HDA_BIND_MUTE("Front Playback Switch", 0x08, 2, HDA_INPUT), - HDA_CODEC_VOLUME("Headphone Playback Volume", 0x09, 0x0, HDA_OUTPUT), - HDA_BIND_MUTE("Headphone Playback Switch", 0x09, 2, HDA_INPUT), - HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT), - HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT), - { } /* end */ -}; - -static const struct snd_kcontrol_new alc260_input_mixer[] = { - HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT), - HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT), - HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT), - HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT), - HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT), - HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT), - HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x07, 0x01, HDA_INPUT), - HDA_CODEC_MUTE("Front Mic Playback Switch", 0x07, 0x01, HDA_INPUT), - { } /* end */ -}; - -/* - * initialization verbs - */ -static const struct hda_verb alc260_init_verbs[] = { - /* Line In pin widget for input */ - {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, - /* CD pin widget for input */ - {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, - /* Mic1 (rear panel) pin widget for input and vref at 80% */ - {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, - /* Mic2 (front panel) pin widget for input and vref at 80% */ - {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, - /* LINE-2 is used for line-out in rear */ - {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - /* select line-out */ - {0x0e, AC_VERB_SET_CONNECT_SEL, 0x00}, - /* LINE-OUT pin */ - {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - /* enable HP */ - {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, - /* enable Mono */ - {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - /* mute capture amp left and right */ - {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - /* set connection select to line in (default select for this ADC) */ - {0x04, AC_VERB_SET_CONNECT_SEL, 0x02}, - /* mute capture amp left and right */ - {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - /* set connection select to line in (default select for this ADC) */ - {0x05, AC_VERB_SET_CONNECT_SEL, 0x02}, - /* set vol=0 Line-Out mixer amp left and right */ - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - /* unmute pin widget amp left and right (no gain on this amp) */ - {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - /* set vol=0 HP mixer amp left and right */ - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - /* unmute pin widget amp left and right (no gain on this amp) */ - {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - /* set vol=0 Mono mixer amp left and right */ - {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - /* unmute pin widget amp left and right (no gain on this amp) */ - {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - /* unmute LINE-2 out pin */ - {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & - * Line In 2 = 0x03 - */ - /* mute analog inputs */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, - /* Amp Indexes: DAC = 0x01 & mixer = 0x00 */ - /* mute Front out path */ - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - /* mute Headphone out path */ - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - /* mute Mono out path */ - {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - { } -}; - -static const struct hda_verb alc260_hp_dc7600_verbs[] = { - {0x05, AC_VERB_SET_CONNECT_SEL, 0x01}, - {0x15, AC_VERB_SET_CONNECT_SEL, 0x01}, - {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, - {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, - {0x10, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT}, - {0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT}, - {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT}, - {} -}; - -/* Test configuration for debugging, modelled after the ALC880 test - * configuration. - */ -#ifdef CONFIG_SND_DEBUG -static const hda_nid_t alc260_test_dac_nids[1] = { - 0x02, -}; -static const hda_nid_t alc260_test_adc_nids[2] = { - 0x04, 0x05, -}; -/* For testing the ALC260, each input MUX needs its own definition since - * the signal assignments are different. This assumes that the first ADC - * is NID 0x04. - */ -static const struct hda_input_mux alc260_test_capture_sources[2] = { - { - .num_items = 7, - .items = { - { "MIC1 pin", 0x0 }, - { "MIC2 pin", 0x1 }, - { "LINE1 pin", 0x2 }, - { "LINE2 pin", 0x3 }, - { "CD pin", 0x4 }, - { "LINE-OUT pin", 0x5 }, - { "HP-OUT pin", 0x6 }, - }, - }, - { - .num_items = 8, - .items = { - { "MIC1 pin", 0x0 }, - { "MIC2 pin", 0x1 }, - { "LINE1 pin", 0x2 }, - { "LINE2 pin", 0x3 }, - { "CD pin", 0x4 }, - { "Mixer", 0x5 }, - { "LINE-OUT pin", 0x6 }, - { "HP-OUT pin", 0x7 }, - }, - }, -}; -static const struct snd_kcontrol_new alc260_test_mixer[] = { - /* Output driver widgets */ - HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT), - HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT), - HDA_CODEC_VOLUME("LOUT2 Playback Volume", 0x09, 0x0, HDA_OUTPUT), - HDA_BIND_MUTE("LOUT2 Playback Switch", 0x09, 2, HDA_INPUT), - HDA_CODEC_VOLUME("LOUT1 Playback Volume", 0x08, 0x0, HDA_OUTPUT), - HDA_BIND_MUTE("LOUT1 Playback Switch", 0x08, 2, HDA_INPUT), - - /* Modes for retasking pin widgets - * Note: the ALC260 doesn't seem to act on requests to enable mic - * bias from NIDs 0x0f and 0x10. The ALC260 datasheet doesn't - * mention this restriction. At this stage it's not clear whether - * this behaviour is intentional or is a hardware bug in chip - * revisions available at least up until early 2006. Therefore for - * now allow the "HP-OUT" and "LINE-OUT" Mode controls to span all - * choices, but if it turns out that the lack of mic bias for these - * NIDs is intentional we could change their modes from - * ALC_PIN_DIR_INOUT to ALC_PIN_DIR_INOUT_NOMICBIAS. - */ - ALC_PIN_MODE("HP-OUT pin mode", 0x10, ALC_PIN_DIR_INOUT), - ALC_PIN_MODE("LINE-OUT pin mode", 0x0f, ALC_PIN_DIR_INOUT), - ALC_PIN_MODE("LINE2 pin mode", 0x15, ALC_PIN_DIR_INOUT), - ALC_PIN_MODE("LINE1 pin mode", 0x14, ALC_PIN_DIR_INOUT), - ALC_PIN_MODE("MIC2 pin mode", 0x13, ALC_PIN_DIR_INOUT), - ALC_PIN_MODE("MIC1 pin mode", 0x12, ALC_PIN_DIR_INOUT), - - /* Loopback mixer controls */ - HDA_CODEC_VOLUME("MIC1 Playback Volume", 0x07, 0x00, HDA_INPUT), - HDA_CODEC_MUTE("MIC1 Playback Switch", 0x07, 0x00, HDA_INPUT), - HDA_CODEC_VOLUME("MIC2 Playback Volume", 0x07, 0x01, HDA_INPUT), - HDA_CODEC_MUTE("MIC2 Playback Switch", 0x07, 0x01, HDA_INPUT), - HDA_CODEC_VOLUME("LINE1 Playback Volume", 0x07, 0x02, HDA_INPUT), - HDA_CODEC_MUTE("LINE1 Playback Switch", 0x07, 0x02, HDA_INPUT), - HDA_CODEC_VOLUME("LINE2 Playback Volume", 0x07, 0x03, HDA_INPUT), - HDA_CODEC_MUTE("LINE2 Playback Switch", 0x07, 0x03, HDA_INPUT), - HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT), - HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT), - HDA_CODEC_VOLUME("LINE-OUT loopback Playback Volume", 0x07, 0x06, HDA_INPUT), - HDA_CODEC_MUTE("LINE-OUT loopback Playback Switch", 0x07, 0x06, HDA_INPUT), - HDA_CODEC_VOLUME("HP-OUT loopback Playback Volume", 0x07, 0x7, HDA_INPUT), - HDA_CODEC_MUTE("HP-OUT loopback Playback Switch", 0x07, 0x7, HDA_INPUT), - - /* Controls for GPIO pins, assuming they are configured as outputs */ - ALC_GPIO_DATA_SWITCH("GPIO pin 0", 0x01, 0x01), - ALC_GPIO_DATA_SWITCH("GPIO pin 1", 0x01, 0x02), - ALC_GPIO_DATA_SWITCH("GPIO pin 2", 0x01, 0x04), - ALC_GPIO_DATA_SWITCH("GPIO pin 3", 0x01, 0x08), - - /* Switches to allow the digital IO pins to be enabled. The datasheet - * is ambigious as to which NID is which; testing on laptops which - * make this output available should provide clarification. - */ - ALC_SPDIF_CTRL_SWITCH("SPDIF Playback Switch", 0x03, 0x01), - ALC_SPDIF_CTRL_SWITCH("SPDIF Capture Switch", 0x06, 0x01), - - /* A switch allowing EAPD to be enabled. Some laptops seem to use - * this output to turn on an external amplifier. - */ - ALC_EAPD_CTRL_SWITCH("LINE-OUT EAPD Enable Switch", 0x0f, 0x02), - ALC_EAPD_CTRL_SWITCH("HP-OUT EAPD Enable Switch", 0x10, 0x02), - - { } /* end */ -}; -static const struct hda_verb alc260_test_init_verbs[] = { - /* Enable all GPIOs as outputs with an initial value of 0 */ - {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x0f}, - {0x01, AC_VERB_SET_GPIO_DATA, 0x00}, - {0x01, AC_VERB_SET_GPIO_MASK, 0x0f}, - - /* Enable retasking pins as output, initially without power amp */ - {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, - - /* Disable digital (SPDIF) pins initially, but users can enable - * them via a mixer switch. In the case of SPDIF-out, this initverb - * payload also sets the generation to 0, output to be in "consumer" - * PCM format, copyright asserted, no pre-emphasis and no validity - * control. - */ - {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0}, - {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0}, - - /* Ensure mic1, mic2, line1 and line2 pin widgets take input from the - * OUT1 sum bus when acting as an output. - */ - {0x0b, AC_VERB_SET_CONNECT_SEL, 0}, - {0x0c, AC_VERB_SET_CONNECT_SEL, 0}, - {0x0d, AC_VERB_SET_CONNECT_SEL, 0}, - {0x0e, AC_VERB_SET_CONNECT_SEL, 0}, - - /* Start with output sum widgets muted and their output gains at min */ - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, - {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, - - /* Unmute retasking pin widget output buffers since the default - * state appears to be output. As the pin mode is changed by the - * user the pin mode control will take care of enabling the pin's - * input/output buffers as needed. - */ - {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - /* Also unmute the mono-out pin widget */ - {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, - - /* Mute capture amp left and right */ - {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - /* Set ADC connection select to match default mixer setting (mic1 - * pin) - */ - {0x04, AC_VERB_SET_CONNECT_SEL, 0x00}, - - /* Do the same for the second ADC: mute capture input amp and - * set ADC connection to mic1 pin - */ - {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, - {0x05, AC_VERB_SET_CONNECT_SEL, 0x00}, - - /* Mute all inputs to mixer widget (even unconnected ones) */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */ - {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */ - - { } -}; -#endif - -/* - * ALC260 configurations - */ -static const char * const alc260_models[ALC260_MODEL_LAST] = { - [ALC260_BASIC] = "basic", -#ifdef CONFIG_SND_DEBUG - [ALC260_TEST] = "test", -#endif - [ALC260_AUTO] = "auto", -}; - -static const struct snd_pci_quirk alc260_cfg_tbl[] = { - SND_PCI_QUIRK(0x104d, 0x81bb, "Sony VAIO", ALC260_BASIC), - SND_PCI_QUIRK(0x104d, 0x81cc, "Sony VAIO", ALC260_BASIC), - SND_PCI_QUIRK(0x104d, 0x81cd, "Sony VAIO", ALC260_BASIC), - SND_PCI_QUIRK(0x152d, 0x0729, "CTL U553W", ALC260_BASIC), - {} -}; - -static const struct alc_config_preset alc260_presets[] = { - [ALC260_BASIC] = { - .mixers = { alc260_base_output_mixer, - alc260_input_mixer }, - .init_verbs = { alc260_init_verbs }, - .num_dacs = ARRAY_SIZE(alc260_dac_nids), - .dac_nids = alc260_dac_nids, - .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids), - .adc_nids = alc260_dual_adc_nids, - .num_channel_mode = ARRAY_SIZE(alc260_modes), - .channel_mode = alc260_modes, - .input_mux = &alc260_capture_source, - }, -#ifdef CONFIG_SND_DEBUG - [ALC260_TEST] = { - .mixers = { alc260_test_mixer }, - .init_verbs = { alc260_test_init_verbs }, - .num_dacs = ARRAY_SIZE(alc260_test_dac_nids), - .dac_nids = alc260_test_dac_nids, - .num_adc_nids = ARRAY_SIZE(alc260_test_adc_nids), - .adc_nids = alc260_test_adc_nids, - .num_channel_mode = ARRAY_SIZE(alc260_modes), - .channel_mode = alc260_modes, - .num_mux_defs = ARRAY_SIZE(alc260_test_capture_sources), - .input_mux = alc260_test_capture_sources, - }, -#endif -}; - diff --git a/sound/pci/hda/alc_quirks.c b/sound/pci/hda/alc_quirks.c index a18952e..b344603 100644 --- a/sound/pci/hda/alc_quirks.c +++ b/sound/pci/hda/alc_quirks.c @@ -74,307 +74,6 @@ static int alc_ch_mode_put(struct snd_kcontrol *kcontrol, return err; } -/* - * Control the mode of pin widget settings via the mixer. "pc" is used - * instead of "%" to avoid consequences of accidentally treating the % as - * being part of a format specifier. Maximum allowed length of a value is - * 63 characters plus NULL terminator. - * - * Note: some retasking pin complexes seem to ignore requests for input - * states other than HiZ (eg: PIN_VREFxx) and revert to HiZ if any of these - * are requested. Therefore order this list so that this behaviour will not - * cause problems when mixer clients move through the enum sequentially. - * NIDs 0x0f and 0x10 have been observed to have this behaviour as of - * March 2006. - */ -static const char * const alc_pin_mode_names[] = { - "Mic 50pc bias", "Mic 80pc bias", - "Line in", "Line out", "Headphone out", -}; -static const unsigned char alc_pin_mode_values[] = { - PIN_VREF50, PIN_VREF80, PIN_IN, PIN_OUT, PIN_HP, -}; -/* The control can present all 5 options, or it can limit the options based - * in the pin being assumed to be exclusively an input or an output pin. In - * addition, "input" pins may or may not process the mic bias option - * depending on actual widget capability (NIDs 0x0f and 0x10 don't seem to - * accept requests for bias as of chip versions up to March 2006) and/or - * wiring in the computer. - */ -#define ALC_PIN_DIR_IN 0x00 -#define ALC_PIN_DIR_OUT 0x01 -#define ALC_PIN_DIR_INOUT 0x02 -#define ALC_PIN_DIR_IN_NOMICBIAS 0x03 -#define ALC_PIN_DIR_INOUT_NOMICBIAS 0x04 - -/* Info about the pin modes supported by the different pin direction modes. - * For each direction the minimum and maximum values are given. - */ -static const signed char alc_pin_mode_dir_info[5][2] = { - { 0, 2 }, /* ALC_PIN_DIR_IN */ - { 3, 4 }, /* ALC_PIN_DIR_OUT */ - { 0, 4 }, /* ALC_PIN_DIR_INOUT */ - { 2, 2 }, /* ALC_PIN_DIR_IN_NOMICBIAS */ - { 2, 4 }, /* ALC_PIN_DIR_INOUT_NOMICBIAS */ -}; -#define alc_pin_mode_min(_dir) (alc_pin_mode_dir_info[_dir][0]) -#define alc_pin_mode_max(_dir) (alc_pin_mode_dir_info[_dir][1]) -#define alc_pin_mode_n_items(_dir) \ - (alc_pin_mode_max(_dir)-alc_pin_mode_min(_dir)+1) - -static int alc_pin_mode_info(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_info *uinfo) -{ - unsigned int item_num = uinfo->value.enumerated.item; - unsigned char dir = (kcontrol->private_value >> 16) & 0xff; - - uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; - uinfo->count = 1; - uinfo->value.enumerated.items = alc_pin_mode_n_items(dir); - - if (item_num<alc_pin_mode_min(dir) || item_num>alc_pin_mode_max(dir)) - item_num = alc_pin_mode_min(dir); - strcpy(uinfo->value.enumerated.name, alc_pin_mode_names[item_num]); - return 0; -} - -static int alc_pin_mode_get(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - unsigned int i; - struct hda_codec *codec = snd_kcontrol_chip(kcontrol); - hda_nid_t nid = kcontrol->private_value & 0xffff; - unsigned char dir = (kcontrol->private_value >> 16) & 0xff; - long *valp = ucontrol->value.integer.value; - unsigned int pinctl = snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_PIN_WIDGET_CONTROL, - 0x00); - - /* Find enumerated value for current pinctl setting */ - i = alc_pin_mode_min(dir); - while (i <= alc_pin_mode_max(dir) && alc_pin_mode_values[i] != pinctl) - i++; - *valp = i <= alc_pin_mode_max(dir) ? i: alc_pin_mode_min(dir); - return 0; -} - -static int alc_pin_mode_put(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - signed int change; - struct hda_codec *codec = snd_kcontrol_chip(kcontrol); - hda_nid_t nid = kcontrol->private_value & 0xffff; - unsigned char dir = (kcontrol->private_value >> 16) & 0xff; - long val = *ucontrol->value.integer.value; - unsigned int pinctl = snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_PIN_WIDGET_CONTROL, - 0x00); - - if (val < alc_pin_mode_min(dir) || val > alc_pin_mode_max(dir)) - val = alc_pin_mode_min(dir); - - change = pinctl != alc_pin_mode_values[val]; - if (change) { - /* Set pin mode to that requested */ - snd_hda_codec_write_cache(codec, nid, 0, - AC_VERB_SET_PIN_WIDGET_CONTROL, - alc_pin_mode_values[val]); - - /* Also enable the retasking pin's input/output as required - * for the requested pin mode. Enum values of 2 or less are - * input modes. - * - * Dynamically switching the input/output buffers probably - * reduces noise slightly (particularly on input) so we'll - * do it. However, having both input and output buffers - * enabled simultaneously doesn't seem to be problematic if - * this turns out to be necessary in the future. - */ - if (val <= 2) { - snd_hda_codec_amp_stereo(codec, nid, HDA_OUTPUT, 0, - HDA_AMP_MUTE, HDA_AMP_MUTE); - snd_hda_codec_amp_stereo(codec, nid, HDA_INPUT, 0, - HDA_AMP_MUTE, 0); - } else { - snd_hda_codec_amp_stereo(codec, nid, HDA_INPUT, 0, - HDA_AMP_MUTE, HDA_AMP_MUTE); - snd_hda_codec_amp_stereo(codec, nid, HDA_OUTPUT, 0, - HDA_AMP_MUTE, 0); - } - } - return change; -} - -#define ALC_PIN_MODE(xname, nid, dir) \ - { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \ - .subdevice = HDA_SUBDEV_NID_FLAG | nid, \ - .info = alc_pin_mode_info, \ - .get = alc_pin_mode_get, \ - .put = alc_pin_mode_put, \ - .private_value = nid | (dir<<16) } - -/* A switch control for ALC260 GPIO pins. Multiple GPIOs can be ganged - * together using a mask with more than one bit set. This control is - * currently used only by the ALC260 test model. At this stage they are not - * needed for any "production" models. - */ -#ifdef CONFIG_SND_DEBUG -#define alc_gpio_data_info snd_ctl_boolean_mono_info - -static int alc_gpio_data_get(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct hda_codec *codec = snd_kcontrol_chip(kcontrol); - hda_nid_t nid = kcontrol->private_value & 0xffff; - unsigned char mask = (kcontrol->private_value >> 16) & 0xff; - long *valp = ucontrol->value.integer.value; - unsigned int val = snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_GPIO_DATA, 0x00); - - *valp = (val & mask) != 0; - return 0; -} -static int alc_gpio_data_put(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - signed int change; - struct hda_codec *codec = snd_kcontrol_chip(kcontrol); - hda_nid_t nid = kcontrol->private_value & 0xffff; - unsigned char mask = (kcontrol->private_value >> 16) & 0xff; - long val = *ucontrol->value.integer.value; - unsigned int gpio_data = snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_GPIO_DATA, - 0x00); - - /* Set/unset the masked GPIO bit(s) as needed */ - change = (val == 0 ? 0 : mask) != (gpio_data & mask); - if (val == 0) - gpio_data &= ~mask; - else - gpio_data |= mask; - snd_hda_codec_write_cache(codec, nid, 0, - AC_VERB_SET_GPIO_DATA, gpio_data); - - return change; -} -#define ALC_GPIO_DATA_SWITCH(xname, nid, mask) \ - { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \ - .subdevice = HDA_SUBDEV_NID_FLAG | nid, \ - .info = alc_gpio_data_info, \ - .get = alc_gpio_data_get, \ - .put = alc_gpio_data_put, \ - .private_value = nid | (mask<<16) } -#endif /* CONFIG_SND_DEBUG */ - -/* A switch control to allow the enabling of the digital IO pins on the - * ALC260. This is incredibly simplistic; the intention of this control is - * to provide something in the test model allowing digital outputs to be - * identified if present. If models are found which can utilise these - * outputs a more complete mixer control can be devised for those models if - * necessary. - */ -#ifdef CONFIG_SND_DEBUG -#define alc_spdif_ctrl_info snd_ctl_boolean_mono_info - -static int alc_spdif_ctrl_get(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct hda_codec *codec = snd_kcontrol_chip(kcontrol); - hda_nid_t nid = kcontrol->private_value & 0xffff; - unsigned char mask = (kcontrol->private_value >> 16) & 0xff; - long *valp = ucontrol->value.integer.value; - unsigned int val = snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_DIGI_CONVERT_1, 0x00); - - *valp = (val & mask) != 0; - return 0; -} -static int alc_spdif_ctrl_put(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - signed int change; - struct hda_codec *codec = snd_kcontrol_chip(kcontrol); - hda_nid_t nid = kcontrol->private_value & 0xffff; - unsigned char mask = (kcontrol->private_value >> 16) & 0xff; - long val = *ucontrol->value.integer.value; - unsigned int ctrl_data = snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_DIGI_CONVERT_1, - 0x00); - - /* Set/unset the masked control bit(s) as needed */ - change = (val == 0 ? 0 : mask) != (ctrl_data & mask); - if (val==0) - ctrl_data &= ~mask; - else - ctrl_data |= mask; - snd_hda_codec_write_cache(codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_1, - ctrl_data); - - return change; -} -#define ALC_SPDIF_CTRL_SWITCH(xname, nid, mask) \ - { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \ - .subdevice = HDA_SUBDEV_NID_FLAG | nid, \ - .info = alc_spdif_ctrl_info, \ - .get = alc_spdif_ctrl_get, \ - .put = alc_spdif_ctrl_put, \ - .private_value = nid | (mask<<16) } -#endif /* CONFIG_SND_DEBUG */ - -/* A switch control to allow the enabling EAPD digital outputs on the ALC26x. - * Again, this is only used in the ALC26x test models to help identify when - * the EAPD line must be asserted for features to work. - */ -#ifdef CONFIG_SND_DEBUG -#define alc_eapd_ctrl_info snd_ctl_boolean_mono_info - -static int alc_eapd_ctrl_get(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct hda_codec *codec = snd_kcontrol_chip(kcontrol); - hda_nid_t nid = kcontrol->private_value & 0xffff; - unsigned char mask = (kcontrol->private_value >> 16) & 0xff; - long *valp = ucontrol->value.integer.value; - unsigned int val = snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_EAPD_BTLENABLE, 0x00); - - *valp = (val & mask) != 0; - return 0; -} - -static int alc_eapd_ctrl_put(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - int change; - struct hda_codec *codec = snd_kcontrol_chip(kcontrol); - hda_nid_t nid = kcontrol->private_value & 0xffff; - unsigned char mask = (kcontrol->private_value >> 16) & 0xff; - long val = *ucontrol->value.integer.value; - unsigned int ctrl_data = snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_EAPD_BTLENABLE, - 0x00); - - /* Set/unset the masked control bit(s) as needed */ - change = (!val ? 0 : mask) != (ctrl_data & mask); - if (!val) - ctrl_data &= ~mask; - else - ctrl_data |= mask; - snd_hda_codec_write_cache(codec, nid, 0, AC_VERB_SET_EAPD_BTLENABLE, - ctrl_data); - - return change; -} - -#define ALC_EAPD_CTRL_SWITCH(xname, nid, mask) \ - { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \ - .subdevice = HDA_SUBDEV_NID_FLAG | nid, \ - .info = alc_eapd_ctrl_info, \ - .get = alc_eapd_ctrl_get, \ - .put = alc_eapd_ctrl_put, \ - .private_value = nid | (mask<<16) } -#endif /* CONFIG_SND_DEBUG */ - static void alc_fixup_autocfg_pin_nums(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 0d81eeb..3ea4206 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4308,14 +4308,10 @@ static const struct snd_pci_quirk alc260_fixup_tbl[] = { /* */ -#ifdef CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS -#include "alc260_quirks.c" -#endif - static int patch_alc260(struct hda_codec *codec) { struct alc_spec *spec; - int err, board_config; + int err; spec = kzalloc(sizeof(*spec), GFP_KERNEL); if (spec == NULL) @@ -4325,38 +4321,13 @@ static int patch_alc260(struct hda_codec *codec) spec->mixer_nid = 0x07; - board_config = alc_board_config(codec, ALC260_MODEL_LAST, - alc260_models, alc260_cfg_tbl); - if (board_config < 0) { - snd_printd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n", - codec->chip_name); - board_config = ALC_MODEL_AUTO; - } - - if (board_config == ALC_MODEL_AUTO) { - alc_pick_fixup(codec, NULL, alc260_fixup_tbl, alc260_fixups); - alc_apply_fixup(codec, ALC_FIXUP_ACT_PRE_PROBE); - } - - if (board_config == ALC_MODEL_AUTO) { - /* automatic parse from the BIOS config */ - err = alc260_parse_auto_config(codec); - if (err < 0) - goto error; -#ifdef CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS - else if (!err) { - printk(KERN_INFO - "hda_codec: Cannot set up configuration " - "from BIOS. Using base mode...\n"); - board_config = ALC260_BASIC; - } -#endif - } + alc_pick_fixup(codec, NULL, alc260_fixup_tbl, alc260_fixups); + alc_apply_fixup(codec, ALC_FIXUP_ACT_PRE_PROBE); - if (board_config != ALC_MODEL_AUTO) { - setup_preset(codec, &alc260_presets[board_config]); - spec->vmaster_nid = 0x08; - } + /* automatic parse from the BIOS config */ + err = alc260_parse_auto_config(codec); + if (err < 0) + goto error; if (!spec->no_analog && !spec->adc_nids) { alc_auto_fill_adc_caps(codec); @@ -4377,10 +4348,7 @@ static int patch_alc260(struct hda_codec *codec) alc_apply_fixup(codec, ALC_FIXUP_ACT_PROBE); codec->patch_ops = alc_patch_ops; - if (board_config == ALC_MODEL_AUTO) - spec->init_hook = alc_auto_init_std; - else - codec->patch_ops.build_controls = __alc_build_controls; + spec->init_hook = alc_auto_init_std; spec->shutup = alc_eapd_shutup; #ifdef CONFIG_SND_HDA_POWER_SAVE if (!spec->loopback.amplist) |