diff options
Diffstat (limited to 'arch/arm/plat-s3c64xx/sleep.S')
-rw-r--r-- | arch/arm/plat-s3c64xx/sleep.S | 144 |
1 files changed, 0 insertions, 144 deletions
diff --git a/arch/arm/plat-s3c64xx/sleep.S b/arch/arm/plat-s3c64xx/sleep.S deleted file mode 100644 index 8e71fe9..0000000 --- a/arch/arm/plat-s3c64xx/sleep.S +++ /dev/null @@ -1,144 +0,0 @@ -/* linux/0arch/arm/plat-s3c64xx/sleep.S - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX CPU sleep code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/linkage.h> -#include <asm/assembler.h> -#include <mach/map.h> - -#undef S3C64XX_VA_GPIO -#define S3C64XX_VA_GPIO (0x0) - -#include <plat/regs-gpio.h> -#include <plat/gpio-bank-n.h> - -#define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT)) - - .text - - /* s3c_cpu_save - * - * Save enough processor state to allow the restart of the pm.c - * code after resume. - * - * entry: - * r0 = pointer to the save block - */ - -ENTRY(s3c_cpu_save) - stmfd sp!, { r4 - r12, lr } - - mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID - mrc p15, 0, r5, c3, c0, 0 @ Domain ID - mrc p15, 0, r6, c2, c0, 0 @ Translation Table BASE0 - mrc p15, 0, r7, c2, c0, 1 @ Translation Table BASE1 - mrc p15, 0, r8, c2, c0, 2 @ Translation Table Control - mrc p15, 0, r9, c1, c0, 0 @ Control register - mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register - mrc p15, 0, r11, c1, c0, 2 @ Co-processor access controls - - stmia r0, { r4 - r13 } @ Save CP registers and SP - - @@ save our state to ram - bl s3c_pm_cb_flushcache - - @@ call final suspend code - ldr r0, =pm_cpu_sleep - ldr pc, [r0] - - @@ return to the caller, after the MMU is turned on. - @@ restore the last bits of the stack and return. -resume_with_mmu: - ldmfd sp!, { r4 - r12, pc } @ return, from sp from s3c_cpu_save - - .data - - /* the next bit is code, but it requires easy access to the - * s3c_sleep_save_phys data before the MMU is switched on, so - * we store the code that needs this variable in the .data where - * the value can be written to (the .text segment is RO). - */ - - .global s3c_sleep_save_phys -s3c_sleep_save_phys: - .word 0 - - /* Sleep magic, the word before the resume entry point so that the - * bootloader can check for a resumeable image. */ - - .word 0x2bedf00d - - /* s3c_cpu_reusme - * - * This is the entry point, stored by whatever method the bootloader - * requires to get the kernel runnign again. This code expects to be - * entered with no caches live and the MMU disabled. It will then - * restore the MMU and other basic CP registers saved and restart - * the kernel C code to finish the resume code. - */ - -ENTRY(s3c_cpu_resume) - msr cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE - ldr r2, =LL_UART /* for debug */ - -#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK - /* Initialise the GPIO state if we are debugging via the SMDK LEDs, - * as the uboot version supplied resets these to inputs during the - * resume checks. - */ - - ldr r3, =S3C64XX_PA_GPIO - ldr r0, [ r3, #S3C64XX_GPNCON ] - bic r0, r0, #(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) | \ - S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15)) - orr r0, r0, #(S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) | \ - S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15)) - str r0, [ r3, #S3C64XX_GPNCON ] - - ldr r0, [ r3, #S3C64XX_GPNDAT ] - bic r0, r0, #0xf << 12 @ GPN12..15 - orr r0, r0, #1 << 15 @ GPN15 - str r0, [ r3, #S3C64XX_GPNDAT ] -#endif - - /* __v6_setup from arch/arm/mm/proc-v6.S, ensure that the caches - * are thoroughly cleaned just in case the bootloader didn't do it - * for us. */ - mov r0, #0 - mcr p15, 0, r0, c7, c14, 0 @ clean+invalidate D cache - mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mcr p15, 0, r0, c7, c15, 0 @ clean+invalidate cache - mcr p15, 0, r0, c7, c10, 4 @ drain write buffer - @@mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs - @@mcr p15, 0, r0, c7, c7, 0 @ Invalidate I + D caches - - ldr r0, s3c_sleep_save_phys - ldmia r0, { r4 - r13 } - - mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID - mcr p15, 0, r5, c3, c0, 0 @ Domain ID - mcr p15, 0, r6, c2, c0, 0 @ Translation Table BASE0 - mcr p15, 0, r7, c2, c0, 1 @ Translation Table BASE1 - mcr p15, 0, r8, c2, c0, 2 @ Translation Table Control - mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register - - mov r0, #0 @ restore copro access controls - mcr p15, 0, r11, c1, c0, 2 @ Co-processor access controls - mcr p15, 0, r0, c7, c5, 4 - - ldr r2, =resume_with_mmu - mcr p15, 0, r9, c1, c0, 0 /* turn mmu back on */ - nop - mov pc, r2 /* jump back */ - - .end |