diff options
Diffstat (limited to 'drivers/staging/et131x')
28 files changed, 3349 insertions, 5898 deletions
diff --git a/drivers/staging/et131x/Makefile b/drivers/staging/et131x/Makefile index 3ad571d..95c645d 100644 --- a/drivers/staging/et131x/Makefile +++ b/drivers/staging/et131x/Makefile @@ -5,14 +5,11 @@ obj-$(CONFIG_ET131X) += et131x.o et131x-objs := et1310_eeprom.o \ - et1310_jagcore.o \ et1310_mac.o \ et1310_phy.o \ et1310_pm.o \ et1310_rx.o \ et1310_tx.o \ - et131x_config.o \ - et131x_debug.o \ et131x_initpci.o \ et131x_isr.o \ et131x_netdev.o diff --git a/drivers/staging/et131x/et1310_address_map.h b/drivers/staging/et131x/et1310_address_map.h index 3c85999..6294d38 100644 --- a/drivers/staging/et131x/et1310_address_map.h +++ b/drivers/staging/et131x/et1310_address_map.h @@ -2,7 +2,7 @@ * Agere Systems Inc. * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * http://www.agere.com * @@ -19,7 +19,7 @@ * software indicates your acceptance of these terms and conditions. If you do * not agree with these terms and conditions, do not use the software. * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * * Redistribution and use in source or binary forms, with or without @@ -40,7 +40,7 @@ * * Disclaimer * - * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN @@ -61,255 +61,110 @@ /* START OF GLOBAL REGISTER ADDRESS MAP */ -typedef union _Q_ADDR_t { - u32 value; - struct { -#ifdef _BIT_FIELDS_HTOL - u32 unused:22; // bits 10-31 - u32 addr:10; // bits 0-9 -#else - u32 addr:10; // bits 0-9 - u32 unused:22; // bits 10-31 -#endif - } bits; -} Q_ADDR_t, *PQ_ADDR_t; - -/* - * structure for tx queue start address reg in global address map - * located at address 0x0000 - * Defined earlier (Q_ADDR_t) - */ - /* - * structure for tx queue end address reg in global address map - * located at address 0x0004 - * Defined earlier (Q_ADDR_t) - */ - -/* - * structure for rx queue start address reg in global address map - * located at address 0x0008 - * Defined earlier (Q_ADDR_t) - */ - -/* - * structure for rx queue end address reg in global address map - * located at address 0x000C - * Defined earlier (Q_ADDR_t) + * 10bit registers + * + * Tx queue start address reg in global address map at address 0x0000 + * tx queue end address reg in global address map at address 0x0004 + * rx queue start address reg in global address map at address 0x0008 + * rx queue end address reg in global address map at address 0x000C */ /* * structure for power management control status reg in global address map * located at address 0x0010 - */ -typedef union _PM_CSR_t { - u32 value; - struct { -#ifdef _BIT_FIELDS_HTOL - u32 unused:22; // bits 10-31 - u32 pm_jagcore_rx_rdy:1; // bit 9 - u32 pm_jagcore_tx_rdy:1; // bit 8 - u32 pm_phy_lped_en:1; // bit 7 - u32 pm_phy_sw_coma:1; // bit 6 - u32 pm_rxclk_gate:1; // bit 5 - u32 pm_txclk_gate:1; // bit 4 - u32 pm_sysclk_gate:1; // bit 3 - u32 pm_jagcore_rx_en:1; // bit 2 - u32 pm_jagcore_tx_en:1; // bit 1 - u32 pm_gigephy_en:1; // bit 0 -#else - u32 pm_gigephy_en:1; // bit 0 - u32 pm_jagcore_tx_en:1; // bit 1 - u32 pm_jagcore_rx_en:1; // bit 2 - u32 pm_sysclk_gate:1; // bit 3 - u32 pm_txclk_gate:1; // bit 4 - u32 pm_rxclk_gate:1; // bit 5 - u32 pm_phy_sw_coma:1; // bit 6 - u32 pm_phy_lped_en:1; // bit 7 - u32 pm_jagcore_tx_rdy:1; // bit 8 - u32 pm_jagcore_rx_rdy:1; // bit 9 - u32 unused:22; // bits 10-31 -#endif - } bits; -} PM_CSR_t, *PPM_CSR_t; - -/* - * structure for interrupt status reg in global address map - * located at address 0x0018 - */ -typedef union _INTERRUPT_t { - u32 value; - struct { -#ifdef _BIT_FIELDS_HTOL - u32 unused5:11; // bits 21-31 - u32 slv_timeout:1; // bit 20 - u32 mac_stat_interrupt:1; // bit 19 - u32 rxmac_interrupt:1; // bit 18 - u32 txmac_interrupt:1; // bit 17 - u32 phy_interrupt:1; // bit 16 - u32 wake_on_lan:1; // bit 15 - u32 watchdog_interrupt:1; // bit 14 - u32 unused4:4; // bits 10-13 - u32 rxdma_err:1; // bit 9 - u32 rxdma_pkt_stat_ring_low:1; // bit 8 - u32 rxdma_fb_ring1_low:1; // bit 7 - u32 rxdma_fb_ring0_low:1; // bit 6 - u32 rxdma_xfr_done:1; // bit 5 - u32 txdma_err:1; // bit 4 - u32 txdma_isr:1; // bit 3 - u32 unused3:1; // bit 2 - u32 unused2:1; // bit 1 - u32 unused1:1; // bit 0 -#else - u32 unused1:1; // bit 0 - u32 unused2:1; // bit 1 - u32 unused3:1; // bit 2 - u32 txdma_isr:1; // bit 3 - u32 txdma_err:1; // bit 4 - u32 rxdma_xfr_done:1; // bit 5 - u32 rxdma_fb_ring0_low:1; // bit 6 - u32 rxdma_fb_ring1_low:1; // bit 7 - u32 rxdma_pkt_stat_ring_low:1; // bit 8 - u32 rxdma_err:1; // bit 9 - u32 unused4:4; // bits 10-13 - u32 watchdog_interrupt:1; // bit 14 - u32 wake_on_lan:1; // bit 15 - u32 phy_interrupt:1; // bit 16 - u32 txmac_interrupt:1; // bit 17 - u32 rxmac_interrupt:1; // bit 18 - u32 mac_stat_interrupt:1; // bit 19 - u32 slv_timeout:1; // bit 20 - u32 unused5:11; // bits 21-31 -#endif - } bits; -} INTERRUPT_t, *PINTERRUPT_t; - -/* - * structure for interrupt mask reg in global address map - * located at address 0x001C - * Defined earlier (INTERRUPT_t), but 'watchdog_interrupt' is not used. + * jagcore_rx_rdy bit 9 + * jagcore_tx_rdy bit 8 + * phy_lped_en bit 7 + * phy_sw_coma bit 6 + * rxclk_gate bit 5 + * txclk_gate bit 4 + * sysclk_gate bit 3 + * jagcore_rx_en bit 2 + * jagcore_tx_en bit 1 + * gigephy_en bit 0 + */ + +#define ET_PM_PHY_SW_COMA 0x40 +#define ET_PMCSR_INIT 0x38 + +/* + * Interrupt status reg at address 0x0018 + */ + +#define ET_INTR_TXDMA_ISR 0x00000008 +#define ET_INTR_TXDMA_ERR 0x00000010 +#define ET_INTR_RXDMA_XFR_DONE 0x00000020 +#define ET_INTR_RXDMA_FB_R0_LOW 0x00000040 +#define ET_INTR_RXDMA_FB_R1_LOW 0x00000080 +#define ET_INTR_RXDMA_STAT_LOW 0x00000100 +#define ET_INTR_RXDMA_ERR 0x00000200 +#define ET_INTR_WATCHDOG 0x00004000 +#define ET_INTR_WOL 0x00008000 +#define ET_INTR_PHY 0x00010000 +#define ET_INTR_TXMAC 0x00020000 +#define ET_INTR_RXMAC 0x00040000 +#define ET_INTR_MAC_STAT 0x00080000 +#define ET_INTR_SLV_TIMEOUT 0x00100000 + +/* + * Interrupt mask register at address 0x001C + * Interrupt alias clear mask reg at address 0x0020 + * Interrupt status alias reg at address 0x0024 + * + * Same masks as above */ /* - * structure for interrupt alias clear mask reg in global address map - * located at address 0x0020 - * Defined earlier (INTERRUPT_t) + * Software reset reg at address 0x0028 + * 0: txdma_sw_reset + * 1: rxdma_sw_reset + * 2: txmac_sw_reset + * 3: rxmac_sw_reset + * 4: mac_sw_reset + * 5: mac_stat_sw_reset + * 6: mmc_sw_reset + *31: selfclr_disable */ /* - * structure for interrupt status alias reg in global address map - * located at address 0x0024 - * Defined earlier (INTERRUPT_t) + * SLV Timer reg at address 0x002C (low 24 bits) */ /* - * structure for software reset reg in global address map - * located at address 0x0028 + * MSI Configuration reg at address 0x0030 */ -typedef union _SW_RESET_t { - u32 value; - struct { -#ifdef _BIT_FIELDS_HTOL - u32 selfclr_disable:1; // bit 31 - u32 unused:24; // bits 7-30 - u32 mmc_sw_reset:1; // bit 6 - u32 mac_stat_sw_reset:1; // bit 5 - u32 mac_sw_reset:1; // bit 4 - u32 rxmac_sw_reset:1; // bit 3 - u32 txmac_sw_reset:1; // bit 2 - u32 rxdma_sw_reset:1; // bit 1 - u32 txdma_sw_reset:1; // bit 0 -#else - u32 txdma_sw_reset:1; // bit 0 - u32 rxdma_sw_reset:1; // bit 1 - u32 txmac_sw_reset:1; // bit 2 - u32 rxmac_sw_reset:1; // bit 3 - u32 mac_sw_reset:1; // bit 4 - u32 mac_stat_sw_reset:1; // bit 5 - u32 mmc_sw_reset:1; // bit 6 - u32 unused:24; // bits 7-30 - u32 selfclr_disable:1; // bit 31 -#endif - } bits; -} SW_RESET_t, *PSW_RESET_t; -/* - * structure for SLV Timer reg in global address map - * located at address 0x002C - */ -typedef union _SLV_TIMER_t { - u32 value; - struct { -#ifdef _BIT_FIELDS_HTOL - u32 unused:8; // bits 24-31 - u32 timer_ini:24; // bits 0-23 -#else - u32 timer_ini:24; // bits 0-23 - u32 unused:8; // bits 24-31 -#endif - } bits; -} SLV_TIMER_t, *PSLV_TIMER_t; +#define ET_MSI_VECTOR 0x0000001F +#define ET_MSI_TC 0x00070000 /* - * structure for MSI Configuration reg in global address map - * located at address 0x0030 + * Loopback reg located at address 0x0034 */ -typedef union _MSI_CONFIG_t { - u32 value; - struct { -#ifdef _BIT_FIELDS_HTOL - u32 unused1:13; // bits 19-31 - u32 msi_tc:3; // bits 16-18 - u32 unused2:11; // bits 5-15 - u32 msi_vector:5; // bits 0-4 -#else - u32 msi_vector:5; // bits 0-4 - u32 unused2:11; // bits 5-15 - u32 msi_tc:3; // bits 16-18 - u32 unused1:13; // bits 19-31 -#endif - } bits; -} MSI_CONFIG_t, *PMSI_CONFIG_t; -/* - * structure for Loopback reg in global address map - * located at address 0x0034 - */ -typedef union _LOOPBACK_t { - u32 value; - struct { -#ifdef _BIT_FIELDS_HTOL - u32 unused:30; // bits 2-31 - u32 dma_loopback:1; // bit 1 - u32 mac_loopback:1; // bit 0 -#else - u32 mac_loopback:1; // bit 0 - u32 dma_loopback:1; // bit 1 - u32 unused:30; // bits 2-31 -#endif - } bits; -} LOOPBACK_t, *PLOOPBACK_t; +#define ET_LOOP_MAC 0x00000001 +#define ET_LOOP_DMA 0x00000002 /* * GLOBAL Module of JAGCore Address Mapping * Located at address 0x0000 */ -typedef struct _GLOBAL_t { // Location: - Q_ADDR_t txq_start_addr; // 0x0000 - Q_ADDR_t txq_end_addr; // 0x0004 - Q_ADDR_t rxq_start_addr; // 0x0008 - Q_ADDR_t rxq_end_addr; // 0x000C - PM_CSR_t pm_csr; // 0x0010 - u32 unused; // 0x0014 - INTERRUPT_t int_status; // 0x0018 - INTERRUPT_t int_mask; // 0x001C - INTERRUPT_t int_alias_clr_en; // 0x0020 - INTERRUPT_t int_status_alias; // 0x0024 - SW_RESET_t sw_reset; // 0x0028 - SLV_TIMER_t slv_timer; // 0x002C - MSI_CONFIG_t msi_config; // 0x0030 - LOOPBACK_t loopback; // 0x0034 - u32 watchdog_timer; // 0x0038 +typedef struct _GLOBAL_t { /* Location: */ + u32 txq_start_addr; /* 0x0000 */ + u32 txq_end_addr; /* 0x0004 */ + u32 rxq_start_addr; /* 0x0008 */ + u32 rxq_end_addr; /* 0x000C */ + u32 pm_csr; /* 0x0010 */ + u32 unused; /* 0x0014 */ + u32 int_status; /* 0x0018 */ + u32 int_mask; /* 0x001C */ + u32 int_alias_clr_en; /* 0x0020 */ + u32 int_status_alias; /* 0x0024 */ + u32 sw_reset; /* 0x0028 */ + u32 slv_timer; /* 0x002C */ + u32 msi_config; /* 0x0030 */ + u32 loopback; /* 0x0034 */ + u32 watchdog_timer; /* 0x0038 */ } GLOBAL_t, *PGLOBAL_t; /* END OF GLOBAL REGISTER ADDRESS MAP */ @@ -318,31 +173,15 @@ typedef struct _GLOBAL_t { // Location: /* START OF TXDMA REGISTER ADDRESS MAP */ /* - * structure for txdma control status reg in txdma address map - * located at address 0x1000 + * txdma control status reg at address 0x1000 */ -typedef union _TXDMA_CSR_t { - u32 value; - struct { -#ifdef _BIT_FIELDS_HTOL - u32 unused2:19; // bits 13-31 - u32 traffic_class:4; // bits 9-12 - u32 sngl_epkt_mode:1; // bit 8 - u32 cache_thrshld:4; // bits 4-7 - u32 unused1:2; // bits 2-3 - u32 drop_TLP_disable:1; // bit 1 - u32 halt:1; // bit 0 -#else - u32 halt:1; // bit 0 - u32 drop_TLP_disable:1; // bit 1 - u32 unused1:2; // bits 2-3 - u32 cache_thrshld:4; // bits 4-7 - u32 sngl_epkt_mode:1; // bit 8 - u32 traffic_class:4; // bits 9-12 - u32 unused2:19; // bits 13-31 -#endif - } bits; -} TXDMA_CSR_t, *PTXDMA_CSR_t; + +#define ET_TXDMA_CSR_HALT 0x00000001 +#define ET_TXDMA_DROP_TLP 0x00000002 +#define ET_TXDMA_CACHE_THRS 0x000000F0 +#define ET_TXDMA_CACHE_SHIFT 4 +#define ET_TXDMA_SNGL_EPKT 0x00000100 +#define ET_TXDMA_CLASS 0x00001E00 /* * structure for txdma packet ring base address hi reg in txdma address map @@ -364,162 +203,87 @@ typedef union _TXDMA_PR_NUM_DES_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 unused:22; // bits 10-31 - u32 pr_ndes:10; // bits 0-9 + u32 unused:22; /* bits 10-31 */ + u32 pr_ndes:10; /* bits 0-9 */ #else - u32 pr_ndes:10; // bits 0-9 - u32 unused:22; // bits 10-31 + u32 pr_ndes:10; /* bits 0-9 */ + u32 unused:22; /* bits 10-31 */ #endif } bits; } TXDMA_PR_NUM_DES_t, *PTXDMA_PR_NUM_DES_t; -typedef union _DMA10W_t { - u32 value; - struct { -#ifdef _BIT_FIELDS_HTOL - u32 unused:21; // bits 11-31 - u32 wrap:1; // bit 10 - u32 val:10; // bits 0-9 -#else - u32 val:10; // bits 0-9 - u32 wrap:1; // bit 10 - u32 unused:21; // bits 11-31 -#endif - } bits; -} DMA10W_t, *PDMA10W_t; - -/* - * structure for txdma tx queue write address reg in txdma address map - * located at address 0x1010 - * Defined earlier (DMA10W_t) - */ - -/* - * structure for txdma tx queue write address external reg in txdma address map - * located at address 0x1014 - * Defined earlier (DMA10W_t) - */ +#define ET_DMA10_MASK 0x3FF /* 10 bit mask for DMA10W types */ +#define ET_DMA10_WRAP 0x400 +#define ET_DMA4_MASK 0x00F /* 4 bit mask for DMA4W types */ +#define ET_DMA4_WRAP 0x010 -/* - * structure for txdma tx queue read address reg in txdma address map - * located at address 0x1018 - * Defined earlier (DMA10W_t) - */ - -/* - * structure for txdma status writeback address hi reg in txdma address map - * located at address 0x101C - * Defined earlier (u32) - */ - -/* - * structure for txdma status writeback address lo reg in txdma address map - * located at address 0x1020 - * Defined earlier (u32) - */ +#define INDEX10(x) ((x) & ET_DMA10_MASK) +#define INDEX4(x) ((x) & ET_DMA4_MASK) -/* - * structure for txdma service request reg in txdma address map - * located at address 0x1024 - * Defined earlier (DMA10W_t) - */ - -/* - * structure for txdma service complete reg in txdma address map - * located at address 0x1028 - * Defined earlier (DMA10W_t) - */ - -typedef union _DMA4W_t { - u32 value; - struct { -#ifdef _BIT_FIELDS_HTOL - u32 unused:27; // bits 5-31 - u32 wrap:1; // bit 4 - u32 val:4; // bit 0-3 -#else - u32 val:4; // bits 0-3 - u32 wrap:1; // bit 4 - u32 unused:27; // bits 5-31 -#endif - } bits; -} DMA4W_t, *PDMA4W_t; - -/* - * structure for txdma tx descriptor cache read index reg in txdma address map - * located at address 0x102C - * Defined earlier (DMA4W_t) - */ - -/* - * structure for txdma tx descriptor cache write index reg in txdma address map - * located at address 0x1030 - * Defined earlier (DMA4W_t) - */ +extern inline void add_10bit(u32 *v, int n) +{ + *v = INDEX10(*v + n); +} /* - * structure for txdma error reg in txdma address map - * located at address 0x1034 + * 10bit DMA with wrap + * txdma tx queue write address reg in txdma address map at 0x1010 + * txdma tx queue write address external reg in txdma address map at 0x1014 + * txdma tx queue read address reg in txdma address map at 0x1018 + * + * u32 + * txdma status writeback address hi reg in txdma address map at0x101C + * txdma status writeback address lo reg in txdma address map at 0x1020 + * + * 10bit DMA with wrap + * txdma service request reg in txdma address map at 0x1024 + * structure for txdma service complete reg in txdma address map at 0x1028 + * + * 4bit DMA with wrap + * txdma tx descriptor cache read index reg in txdma address map at 0x102C + * txdma tx descriptor cache write index reg in txdma address map at 0x1030 + * + * txdma error reg in txdma address map at address 0x1034 + * 0: PyldResend + * 1: PyldRewind + * 4: DescrResend + * 5: DescrRewind + * 8: WrbkResend + * 9: WrbkRewind */ -typedef union _TXDMA_ERROR_t { - u32 value; - struct { -#ifdef _BIT_FIELDS_HTOL - u32 unused3:22; // bits 10-31 - u32 WrbkRewind:1; // bit 9 - u32 WrbkResend:1; // bit 8 - u32 unused2:2; // bits 6-7 - u32 DescrRewind:1; // bit 5 - u32 DescrResend:1; // bit 4 - u32 unused1:2; // bits 2-3 - u32 PyldRewind:1; // bit 1 - u32 PyldResend:1; // bit 0 -#else - u32 PyldResend:1; // bit 0 - u32 PyldRewind:1; // bit 1 - u32 unused1:2; // bits 2-3 - u32 DescrResend:1; // bit 4 - u32 DescrRewind:1; // bit 5 - u32 unused2:2; // bits 6-7 - u32 WrbkResend:1; // bit 8 - u32 WrbkRewind:1; // bit 9 - u32 unused3:22; // bits 10-31 -#endif - } bits; -} TXDMA_ERROR_t, *PTXDMA_ERROR_t; /* * Tx DMA Module of JAGCore Address Mapping * Located at address 0x1000 */ -typedef struct _TXDMA_t { // Location: - TXDMA_CSR_t csr; // 0x1000 - u32 pr_base_hi; // 0x1004 - u32 pr_base_lo; // 0x1008 - TXDMA_PR_NUM_DES_t pr_num_des; // 0x100C - DMA10W_t txq_wr_addr; // 0x1010 - DMA10W_t txq_wr_addr_ext; // 0x1014 - DMA10W_t txq_rd_addr; // 0x1018 - u32 dma_wb_base_hi; // 0x101C - u32 dma_wb_base_lo; // 0x1020 - DMA10W_t service_request; // 0x1024 - DMA10W_t service_complete; // 0x1028 - DMA4W_t cache_rd_index; // 0x102C - DMA4W_t cache_wr_index; // 0x1030 - TXDMA_ERROR_t TxDmaError; // 0x1034 - u32 DescAbortCount; // 0x1038 - u32 PayloadAbortCnt; // 0x103c - u32 WriteBackAbortCnt; // 0x1040 - u32 DescTimeoutCnt; // 0x1044 - u32 PayloadTimeoutCnt; // 0x1048 - u32 WriteBackTimeoutCnt; // 0x104c - u32 DescErrorCount; // 0x1050 - u32 PayloadErrorCnt; // 0x1054 - u32 WriteBackErrorCnt; // 0x1058 - u32 DroppedTLPCount; // 0x105c - DMA10W_t NewServiceComplete; // 0x1060 - u32 EthernetPacketCount; // 0x1064 +typedef struct _TXDMA_t { /* Location: */ + u32 csr; /* 0x1000 */ + u32 pr_base_hi; /* 0x1004 */ + u32 pr_base_lo; /* 0x1008 */ + TXDMA_PR_NUM_DES_t pr_num_des; /* 0x100C */ + u32 txq_wr_addr; /* 0x1010 */ + u32 txq_wr_addr_ext; /* 0x1014 */ + u32 txq_rd_addr; /* 0x1018 */ + u32 dma_wb_base_hi; /* 0x101C */ + u32 dma_wb_base_lo; /* 0x1020 */ + u32 service_request; /* 0x1024 */ + u32 service_complete; /* 0x1028 */ + u32 cache_rd_index; /* 0x102C */ + u32 cache_wr_index; /* 0x1030 */ + u32 TxDmaError; /* 0x1034 */ + u32 DescAbortCount; /* 0x1038 */ + u32 PayloadAbortCnt; /* 0x103c */ + u32 WriteBackAbortCnt; /* 0x1040 */ + u32 DescTimeoutCnt; /* 0x1044 */ + u32 PayloadTimeoutCnt; /* 0x1048 */ + u32 WriteBackTimeoutCnt; /* 0x104c */ + u32 DescErrorCount; /* 0x1050 */ + u32 PayloadErrorCnt; /* 0x1054 */ + u32 WriteBackErrorCnt; /* 0x1058 */ + u32 DroppedTLPCount; /* 0x105c */ + u32 NewServiceComplete; /* 0x1060 */ + u32 EthernetPacketCount; /* 0x1064 */ } TXDMA_t, *PTXDMA_t; /* END OF TXDMA REGISTER ADDRESS MAP */ @@ -535,37 +299,37 @@ typedef union _RXDMA_CSR_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 unused2:14; // bits 18-31 - u32 halt_status:1; // bit 17 - u32 pkt_done_flush:1; // bit 16 - u32 pkt_drop_disable:1; // bit 15 - u32 unused1:1; // bit 14 - u32 fbr1_enable:1; // bit 13 - u32 fbr1_size:2; // bits 11-12 - u32 fbr0_enable:1; // bit 10 - u32 fbr0_size:2; // bits 8-9 - u32 dma_big_endian:1; // bit 7 - u32 pkt_big_endian:1; // bit 6 - u32 psr_big_endian:1; // bit 5 - u32 fbr_big_endian:1; // bit 4 - u32 tc:3; // bits 1-3 - u32 halt:1; // bit 0 -#else - u32 halt:1; // bit 0 - u32 tc:3; // bits 1-3 - u32 fbr_big_endian:1; // bit 4 - u32 psr_big_endian:1; // bit 5 - u32 pkt_big_endian:1; // bit 6 - u32 dma_big_endian:1; // bit 7 - u32 fbr0_size:2; // bits 8-9 - u32 fbr0_enable:1; // bit 10 - u32 fbr1_size:2; // bits 11-12 - u32 fbr1_enable:1; // bit 13 - u32 unused1:1; // bit 14 - u32 pkt_drop_disable:1; // bit 15 - u32 pkt_done_flush:1; // bit 16 - u32 halt_status:1; // bit 17 - u32 unused2:14; // bits 18-31 + u32 unused2:14; /* bits 18-31 */ + u32 halt_status:1; /* bit 17 */ + u32 pkt_done_flush:1; /* bit 16 */ + u32 pkt_drop_disable:1; /* bit 15 */ + u32 unused1:1; /* bit 14 */ + u32 fbr1_enable:1; /* bit 13 */ + u32 fbr1_size:2; /* bits 11-12 */ + u32 fbr0_enable:1; /* bit 10 */ + u32 fbr0_size:2; /* bits 8-9 */ + u32 dma_big_endian:1; /* bit 7 */ + u32 pkt_big_endian:1; /* bit 6 */ + u32 psr_big_endian:1; /* bit 5 */ + u32 fbr_big_endian:1; /* bit 4 */ + u32 tc:3; /* bits 1-3 */ + u32 halt:1; /* bit 0 */ +#else + u32 halt:1; /* bit 0 */ + u32 tc:3; /* bits 1-3 */ + u32 fbr_big_endian:1; /* bit 4 */ + u32 psr_big_endian:1; /* bit 5 */ + u32 pkt_big_endian:1; /* bit 6 */ + u32 dma_big_endian:1; /* bit 7 */ + u32 fbr0_size:2; /* bits 8-9 */ + u32 fbr0_enable:1; /* bit 10 */ + u32 fbr1_size:2; /* bits 11-12 */ + u32 fbr1_enable:1; /* bit 13 */ + u32 unused1:1; /* bit 14 */ + u32 pkt_drop_disable:1; /* bit 15 */ + u32 pkt_done_flush:1; /* bit 16 */ + u32 halt_status:1; /* bit 17 */ + u32 unused2:14; /* bits 18-31 */ #endif } bits; } RXDMA_CSR_t, *PRXDMA_CSR_t; @@ -590,11 +354,11 @@ typedef union _RXDMA_NUM_PKT_DONE_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 unused:24; // bits 8-31 - u32 num_done:8; // bits 0-7 + u32 unused:24; /* bits 8-31 */ + u32 num_done:8; /* bits 0-7 */ #else - u32 num_done:8; // bits 0-7 - u32 unused:24; // bits 8-31 + u32 num_done:8; /* bits 0-7 */ + u32 unused:24; /* bits 8-31 */ #endif } bits; } RXDMA_NUM_PKT_DONE_t, *PRXDMA_NUM_PKT_DONE_t; @@ -607,11 +371,11 @@ typedef union _RXDMA_MAX_PKT_TIME_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 unused:14; // bits 18-31 - u32 time_done:18; // bits 0-17 + u32 unused:14; /* bits 18-31 */ + u32 time_done:18; /* bits 0-17 */ #else - u32 time_done:18; // bits 0-17 - u32 unused:14; // bits 18-31 + u32 time_done:18; /* bits 0-17 */ + u32 unused:14; /* bits 18-31 */ #endif } bits; } RXDMA_MAX_PKT_TIME_t, *PRXDMA_MAX_PKT_TIME_t; @@ -619,19 +383,19 @@ typedef union _RXDMA_MAX_PKT_TIME_t { /* * structure for rx queue read address reg in rxdma address map * located at address 0x2014 - * Defined earlier (DMA10W_t) + * Defined earlier (u32) */ /* * structure for rx queue read address external reg in rxdma address map * located at address 0x2018 - * Defined earlier (DMA10W_t) + * Defined earlier (u32) */ /* * structure for rx queue write address reg in rxdma address map * located at address 0x201C - * Defined earlier (DMA10W_t) + * Defined earlier (u32) */ /* @@ -654,11 +418,11 @@ typedef union _RXDMA_PSR_NUM_DES_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 unused:20; // bits 12-31 - u32 psr_ndes:12; // bit 0-11 + u32 unused:20; /* bits 12-31 */ + u32 psr_ndes:12; /* bit 0-11 */ #else - u32 psr_ndes:12; // bit 0-11 - u32 unused:20; // bits 12-31 + u32 psr_ndes:12; /* bit 0-11 */ + u32 unused:20; /* bits 12-31 */ #endif } bits; } RXDMA_PSR_NUM_DES_t, *PRXDMA_PSR_NUM_DES_t; @@ -671,13 +435,13 @@ typedef union _RXDMA_PSR_AVAIL_OFFSET_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 unused:19; // bits 13-31 - u32 psr_avail_wrap:1; // bit 12 - u32 psr_avail:12; // bit 0-11 + u32 unused:19; /* bits 13-31 */ + u32 psr_avail_wrap:1; /* bit 12 */ + u32 psr_avail:12; /* bit 0-11 */ #else - u32 psr_avail:12; // bit 0-11 - u32 psr_avail_wrap:1; // bit 12 - u32 unused:19; // bits 13-31 + u32 psr_avail:12; /* bit 0-11 */ + u32 psr_avail_wrap:1; /* bit 12 */ + u32 unused:19; /* bits 13-31 */ #endif } bits; } RXDMA_PSR_AVAIL_OFFSET_t, *PRXDMA_PSR_AVAIL_OFFSET_t; @@ -690,13 +454,13 @@ typedef union _RXDMA_PSR_FULL_OFFSET_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 unused:19; // bits 13-31 - u32 psr_full_wrap:1; // bit 12 - u32 psr_full:12; // bit 0-11 + u32 unused:19; /* bits 13-31 */ + u32 psr_full_wrap:1; /* bit 12 */ + u32 psr_full:12; /* bit 0-11 */ #else - u32 psr_full:12; // bit 0-11 - u32 psr_full_wrap:1; // bit 12 - u32 unused:19; // bits 13-31 + u32 psr_full:12; /* bit 0-11 */ + u32 psr_full_wrap:1; /* bit 12 */ + u32 unused:19; /* bits 13-31 */ #endif } bits; } RXDMA_PSR_FULL_OFFSET_t, *PRXDMA_PSR_FULL_OFFSET_t; @@ -709,11 +473,11 @@ typedef union _RXDMA_PSR_ACCESS_INDEX_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 unused:27; // bits 5-31 - u32 psr_ai:5; // bits 0-4 + u32 unused:27; /* bits 5-31 */ + u32 psr_ai:5; /* bits 0-4 */ #else - u32 psr_ai:5; // bits 0-4 - u32 unused:27; // bits 5-31 + u32 psr_ai:5; /* bits 0-4 */ + u32 unused:27; /* bits 5-31 */ #endif } bits; } RXDMA_PSR_ACCESS_INDEX_t, *PRXDMA_PSR_ACCESS_INDEX_t; @@ -726,11 +490,11 @@ typedef union _RXDMA_PSR_MIN_DES_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 unused:20; // bits 12-31 - u32 psr_min:12; // bits 0-11 + u32 unused:20; /* bits 12-31 */ + u32 psr_min:12; /* bits 0-11 */ #else - u32 psr_min:12; // bits 0-11 - u32 unused:20; // bits 12-31 + u32 psr_min:12; /* bits 0-11 */ + u32 unused:20; /* bits 12-31 */ #endif } bits; } RXDMA_PSR_MIN_DES_t, *PRXDMA_PSR_MIN_DES_t; @@ -755,11 +519,11 @@ typedef union _RXDMA_FBR_NUM_DES_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 unused:22; // bits 10-31 - u32 fbr_ndesc:10; // bits 0-9 + u32 unused:22; /* bits 10-31 */ + u32 fbr_ndesc:10; /* bits 0-9 */ #else - u32 fbr_ndesc:10; // bits 0-9 - u32 unused:22; // bits 10-31 + u32 fbr_ndesc:10; /* bits 0-9 */ + u32 unused:22; /* bits 10-31 */ #endif } bits; } RXDMA_FBR_NUM_DES_t, *PRXDMA_FBR_NUM_DES_t; @@ -767,13 +531,13 @@ typedef union _RXDMA_FBR_NUM_DES_t { /* * structure for free buffer ring 0 available offset reg in rxdma address map * located at address 0x2048 - * Defined earlier (DMA10W_t) + * Defined earlier (u32) */ /* * structure for free buffer ring 0 full offset reg in rxdma address map * located at address 0x204C - * Defined earlier (DMA10W_t) + * Defined earlier (u32) */ /* @@ -784,11 +548,11 @@ typedef union _RXDMA_FBC_RD_INDEX_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 unused:27; // bits 5-31 - u32 fbc_rdi:5; // bit 0-4 + u32 unused:27; /* bits 5-31 */ + u32 fbc_rdi:5; /* bit 0-4 */ #else - u32 fbc_rdi:5; // bit 0-4 - u32 unused:27; // bits 5-31 + u32 fbc_rdi:5; /* bit 0-4 */ + u32 unused:27; /* bits 5-31 */ #endif } bits; } RXDMA_FBC_RD_INDEX_t, *PRXDMA_FBC_RD_INDEX_t; @@ -801,11 +565,11 @@ typedef union _RXDMA_FBR_MIN_DES_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 unused:22; // bits 10-31 - u32 fbr_min:10; // bits 0-9 + u32 unused:22; /* bits 10-31 */ + u32 fbr_min:10; /* bits 0-9 */ #else - u32 fbr_min:10; // bits 0-9 - u32 unused:22; // bits 10-31 + u32 fbr_min:10; /* bits 0-9 */ + u32 unused:22; /* bits 10-31 */ #endif } bits; } RXDMA_FBR_MIN_DES_t, *PRXDMA_FBR_MIN_DES_t; @@ -850,36 +614,36 @@ typedef union _RXDMA_FBR_MIN_DES_t { * Rx DMA Module of JAGCore Address Mapping * Located at address 0x2000 */ -typedef struct _RXDMA_t { // Location: - RXDMA_CSR_t csr; // 0x2000 - u32 dma_wb_base_lo; // 0x2004 - u32 dma_wb_base_hi; // 0x2008 - RXDMA_NUM_PKT_DONE_t num_pkt_done; // 0x200C - RXDMA_MAX_PKT_TIME_t max_pkt_time; // 0x2010 - DMA10W_t rxq_rd_addr; // 0x2014 - DMA10W_t rxq_rd_addr_ext; // 0x2018 - DMA10W_t rxq_wr_addr; // 0x201C - u32 psr_base_lo; // 0x2020 - u32 psr_base_hi; // 0x2024 - RXDMA_PSR_NUM_DES_t psr_num_des; // 0x2028 - RXDMA_PSR_AVAIL_OFFSET_t psr_avail_offset; // 0x202C - RXDMA_PSR_FULL_OFFSET_t psr_full_offset; // 0x2030 - RXDMA_PSR_ACCESS_INDEX_t psr_access_index; // 0x2034 - RXDMA_PSR_MIN_DES_t psr_min_des; // 0x2038 - u32 fbr0_base_lo; // 0x203C - u32 fbr0_base_hi; // 0x2040 - RXDMA_FBR_NUM_DES_t fbr0_num_des; // 0x2044 - DMA10W_t fbr0_avail_offset; // 0x2048 - DMA10W_t fbr0_full_offset; // 0x204C - RXDMA_FBC_RD_INDEX_t fbr0_rd_index; // 0x2050 - RXDMA_FBR_MIN_DES_t fbr0_min_des; // 0x2054 - u32 fbr1_base_lo; // 0x2058 - u32 fbr1_base_hi; // 0x205C - RXDMA_FBR_NUM_DES_t fbr1_num_des; // 0x2060 - DMA10W_t fbr1_avail_offset; // 0x2064 - DMA10W_t fbr1_full_offset; // 0x2068 - RXDMA_FBC_RD_INDEX_t fbr1_rd_index; // 0x206C - RXDMA_FBR_MIN_DES_t fbr1_min_des; // 0x2070 +typedef struct _RXDMA_t { /* Location: */ + RXDMA_CSR_t csr; /* 0x2000 */ + u32 dma_wb_base_lo; /* 0x2004 */ + u32 dma_wb_base_hi; /* 0x2008 */ + RXDMA_NUM_PKT_DONE_t num_pkt_done; /* 0x200C */ + RXDMA_MAX_PKT_TIME_t max_pkt_time; /* 0x2010 */ + u32 rxq_rd_addr; /* 0x2014 */ + u32 rxq_rd_addr_ext; /* 0x2018 */ + u32 rxq_wr_addr; /* 0x201C */ + u32 psr_base_lo; /* 0x2020 */ + u32 psr_base_hi; /* 0x2024 */ + RXDMA_PSR_NUM_DES_t psr_num_des; /* 0x2028 */ + RXDMA_PSR_AVAIL_OFFSET_t psr_avail_offset; /* 0x202C */ + RXDMA_PSR_FULL_OFFSET_t psr_full_offset; /* 0x2030 */ + RXDMA_PSR_ACCESS_INDEX_t psr_access_index; /* 0x2034 */ + RXDMA_PSR_MIN_DES_t psr_min_des; /* 0x2038 */ + u32 fbr0_base_lo; /* 0x203C */ + u32 fbr0_base_hi; /* 0x2040 */ + RXDMA_FBR_NUM_DES_t fbr0_num_des; /* 0x2044 */ + u32 fbr0_avail_offset; /* 0x2048 */ + u32 fbr0_full_offset; /* 0x204C */ + RXDMA_FBC_RD_INDEX_t fbr0_rd_index; /* 0x2050 */ + RXDMA_FBR_MIN_DES_t fbr0_min_des; /* 0x2054 */ + u32 fbr1_base_lo; /* 0x2058 */ + u32 fbr1_base_hi; /* 0x205C */ + RXDMA_FBR_NUM_DES_t fbr1_num_des; /* 0x2060 */ + u32 fbr1_avail_offset; /* 0x2064 */ + u32 fbr1_full_offset; /* 0x2068 */ + RXDMA_FBC_RD_INDEX_t fbr1_rd_index; /* 0x206C */ + RXDMA_FBR_MIN_DES_t fbr1_min_des; /* 0x2070 */ } RXDMA_t, *PRXDMA_t; /* END OF RXDMA REGISTER ADDRESS MAP */ @@ -895,25 +659,25 @@ typedef union _TXMAC_CTL_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 unused:24; // bits 8-31 - u32 cklseg_diable:1; // bit 7 - u32 ckbcnt_disable:1; // bit 6 - u32 cksegnum:1; // bit 5 - u32 async_disable:1; // bit 4 - u32 fc_disable:1; // bit 3 - u32 mcif_disable:1; // bit 2 - u32 mif_disable:1; // bit 1 - u32 txmac_en:1; // bit 0 + u32 unused:24; /* bits 8-31 */ + u32 cklseg_diable:1; /* bit 7 */ + u32 ckbcnt_disable:1; /* bit 6 */ + u32 cksegnum:1; /* bit 5 */ + u32 async_disable:1; /* bit 4 */ + u32 fc_disable:1; /* bit 3 */ + u32 mcif_disable:1; /* bit 2 */ + u32 mif_disable:1; /* bit 1 */ + u32 txmac_en:1; /* bit 0 */ #else - u32 txmac_en:1; // bit 0 - u32 mif_disable:1; // bit 1 mac interface - u32 mcif_disable:1; // bit 2 mem. contr. interface - u32 fc_disable:1; // bit 3 - u32 async_disable:1; // bit 4 - u32 cksegnum:1; // bit 5 - u32 ckbcnt_disable:1; // bit 6 - u32 cklseg_diable:1; // bit 7 - u32 unused:24; // bits 8-31 + u32 txmac_en:1; /* bit 0 */ + u32 mif_disable:1; /* bit 1 mac interface */ + u32 mcif_disable:1; /* bit 2 mem. contr. interface */ + u32 fc_disable:1; /* bit 3 */ + u32 async_disable:1; /* bit 4 */ + u32 cksegnum:1; /* bit 5 */ + u32 ckbcnt_disable:1; /* bit 6 */ + u32 cklseg_diable:1; /* bit 7 */ + u32 unused:24; /* bits 8-31 */ #endif } bits; } TXMAC_CTL_t, *PTXMAC_CTL_t; @@ -926,15 +690,15 @@ typedef union _TXMAC_SHADOW_PTR_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 reserved2:5; // bits 27-31 - u32 txq_rd_ptr:11; // bits 16-26 - u32 reserved:5; // bits 11-15 - u32 txq_wr_ptr:11; // bits 0-10 + u32 reserved2:5; /* bits 27-31 */ + u32 txq_rd_ptr:11; /* bits 16-26 */ + u32 reserved:5; /* bits 11-15 */ + u32 txq_wr_ptr:11; /* bits 0-10 */ #else - u32 txq_wr_ptr:11; // bits 0-10 - u32 reserved:5; // bits 11-15 - u32 txq_rd_ptr:11; // bits 16-26 - u32 reserved2:5; // bits 27-31 + u32 txq_wr_ptr:11; /* bits 0-10 */ + u32 reserved:5; /* bits 11-15 */ + u32 txq_rd_ptr:11; /* bits 16-26 */ + u32 reserved2:5; /* bits 27-31 */ #endif } bits; } TXMAC_SHADOW_PTR_t, *PTXMAC_SHADOW_PTR_t; @@ -947,15 +711,15 @@ typedef union _TXMAC_ERR_CNT_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 unused:20; // bits 12-31 - u32 reserved:4; // bits 8-11 - u32 txq_underrun:4; // bits 4-7 - u32 fifo_underrun:4; // bits 0-3 + u32 unused:20; /* bits 12-31 */ + u32 reserved:4; /* bits 8-11 */ + u32 txq_underrun:4; /* bits 4-7 */ + u32 fifo_underrun:4; /* bits 0-3 */ #else - u32 fifo_underrun:4; // bits 0-3 - u32 txq_underrun:4; // bits 4-7 - u32 reserved:4; // bits 8-11 - u32 unused:20; // bits 12-31 + u32 fifo_underrun:4; /* bits 0-3 */ + u32 txq_underrun:4; /* bits 4-7 */ + u32 reserved:4; /* bits 8-11 */ + u32 unused:20; /* bits 12-31 */ #endif } bits; } TXMAC_ERR_CNT_t, *PTXMAC_ERR_CNT_t; @@ -968,11 +732,11 @@ typedef union _TXMAC_MAX_FILL_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 unused:20; // bits 12-31 - u32 max_fill:12; // bits 0-11 + u32 unused:20; /* bits 12-31 */ + u32 max_fill:12; /* bits 0-11 */ #else - u32 max_fill:12; // bits 0-11 - u32 unused:20; // bits 12-31 + u32 max_fill:12; /* bits 0-11 */ + u32 unused:20; /* bits 12-31 */ #endif } bits; } TXMAC_MAX_FILL_t, *PTXMAC_MAX_FILL_t; @@ -985,11 +749,11 @@ typedef union _TXMAC_CF_PARAM_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 cfep:16; // bits 16-31 - u32 cfpt:16; // bits 0-15 + u32 cfep:16; /* bits 16-31 */ + u32 cfpt:16; /* bits 0-15 */ #else - u32 cfpt:16; // bits 0-15 - u32 cfep:16; // bits 16-31 + u32 cfpt:16; /* bits 0-15 */ + u32 cfep:16; /* bits 16-31 */ #endif } bits; } TXMAC_CF_PARAM_t, *PTXMAC_CF_PARAM_t; @@ -1002,17 +766,17 @@ typedef union _TXMAC_TXTEST_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 unused2:15; // bits 17-31 - u32 reserved1:1; // bit 16 - u32 txtest_en:1; // bit 15 - u32 unused1:4; // bits 11-14 - u32 txqtest_ptr:11; // bits 0-11 + u32 unused2:15; /* bits 17-31 */ + u32 reserved1:1; /* bit 16 */ + u32 txtest_en:1; /* bit 15 */ + u32 unused1:4; /* bits 11-14 */ + u32 txqtest_ptr:11; /* bits 0-11 */ #else - u32 txqtest_ptr:11; // bits 0-10 - u32 unused1:4; // bits 11-14 - u32 txtest_en:1; // bit 15 - u32 reserved1:1; // bit 16 - u32 unused2:15; // bits 17-31 + u32 txqtest_ptr:11; /* bits 0-10 */ + u32 unused1:4; /* bits 11-14 */ + u32 txtest_en:1; /* bit 15 */ + u32 reserved1:1; /* bit 16 */ + u32 unused2:15; /* bits 17-31 */ #endif } bits; } TXMAC_TXTEST_t, *PTXMAC_TXTEST_t; @@ -1025,25 +789,25 @@ typedef union _TXMAC_ERR_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 unused2:23; // bits 9-31 - u32 fifo_underrun:1; // bit 8 - u32 unused1:2; // bits 6-7 - u32 ctrl2_err:1; // bit 5 - u32 txq_underrun:1; // bit 4 - u32 bcnt_err:1; // bit 3 - u32 lseg_err:1; // bit 2 - u32 segnum_err:1; // bit 1 - u32 seg0_err:1; // bit 0 + u32 unused2:23; /* bits 9-31 */ + u32 fifo_underrun:1; /* bit 8 */ + u32 unused1:2; /* bits 6-7 */ + u32 ctrl2_err:1; /* bit 5 */ + u32 txq_underrun:1; /* bit 4 */ + u32 bcnt_err:1; /* bit 3 */ + u32 lseg_err:1; /* bit 2 */ + u32 segnum_err:1; /* bit 1 */ + u32 seg0_err:1; /* bit 0 */ #else - u32 seg0_err:1; // bit 0 - u32 segnum_err:1; // bit 1 - u32 lseg_err:1; // bit 2 - u32 bcnt_err:1; // bit 3 - u32 txq_underrun:1; // bit 4 - u32 ctrl2_err:1; // bit 5 - u32 unused1:2; // bits 6-7 - u32 fifo_underrun:1; // bit 8 - u32 unused2:23; // bits 9-31 + u32 seg0_err:1; /* bit 0 */ + u32 segnum_err:1; /* bit 1 */ + u32 lseg_err:1; /* bit 2 */ + u32 bcnt_err:1; /* bit 3 */ + u32 txq_underrun:1; /* bit 4 */ + u32 ctrl2_err:1; /* bit 5 */ + u32 unused1:2; /* bits 6-7 */ + u32 fifo_underrun:1; /* bit 8 */ + u32 unused2:23; /* bits 9-31 */ #endif } bits; } TXMAC_ERR_t, *PTXMAC_ERR_t; @@ -1056,25 +820,25 @@ typedef union _TXMAC_ERR_INT_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 unused2:23; // bits 9-31 - u32 fifo_underrun:1; // bit 8 - u32 unused1:2; // bits 6-7 - u32 ctrl2_err:1; // bit 5 - u32 txq_underrun:1; // bit 4 - u32 bcnt_err:1; // bit 3 - u32 lseg_err:1; // bit 2 - u32 segnum_err:1; // bit 1 - u32 seg0_err:1; // bit 0 + u32 unused2:23; /* bits 9-31 */ + u32 fifo_underrun:1; /* bit 8 */ + u32 unused1:2; /* bits 6-7 */ + u32 ctrl2_err:1; /* bit 5 */ + u32 txq_underrun:1; /* bit 4 */ + u32 bcnt_err:1; /* bit 3 */ + u32 lseg_err:1; /* bit 2 */ + u32 segnum_err:1; /* bit 1 */ + u32 seg0_err:1; /* bit 0 */ #else - u32 seg0_err:1; // bit 0 - u32 segnum_err:1; // bit 1 - u32 lseg_err:1; // bit 2 - u32 bcnt_err:1; // bit 3 - u32 txq_underrun:1; // bit 4 - u32 ctrl2_err:1; // bit 5 - u32 unused1:2; // bits 6-7 - u32 fifo_underrun:1; // bit 8 - u32 unused2:23; // bits 9-31 + u32 seg0_err:1; /* bit 0 */ + u32 segnum_err:1; /* bit 1 */ + u32 lseg_err:1; /* bit 2 */ + u32 bcnt_err:1; /* bit 3 */ + u32 txq_underrun:1; /* bit 4 */ + u32 ctrl2_err:1; /* bit 5 */ + u32 unused1:2; /* bits 6-7 */ + u32 fifo_underrun:1; /* bit 8 */ + u32 unused2:23; /* bits 9-31 */ #endif } bits; } TXMAC_ERR_INT_t, *PTXMAC_ERR_INT_t; @@ -1087,13 +851,13 @@ typedef union _TXMAC_CP_CTRL_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 unused:30; // bits 2-31 - u32 bp_req:1; // bit 1 - u32 bp_xonxoff:1; // bit 0 + u32 unused:30; /* bits 2-31 */ + u32 bp_req:1; /* bit 1 */ + u32 bp_xonxoff:1; /* bit 0 */ #else - u32 bp_xonxoff:1; // bit 0 - u32 bp_req:1; // bit 1 - u32 unused:30; // bits 2-31 + u32 bp_xonxoff:1; /* bit 0 */ + u32 bp_req:1; /* bit 1 */ + u32 unused:30; /* bits 2-31 */ #endif } bits; } TXMAC_BP_CTRL_t, *PTXMAC_BP_CTRL_t; @@ -1101,16 +865,16 @@ typedef union _TXMAC_CP_CTRL_t { /* * Tx MAC Module of JAGCore Address Mapping */ -typedef struct _TXMAC_t { // Location: - TXMAC_CTL_t ctl; // 0x3000 - TXMAC_SHADOW_PTR_t shadow_ptr; // 0x3004 - TXMAC_ERR_CNT_t err_cnt; // 0x3008 - TXMAC_MAX_FILL_t max_fill; // 0x300C - TXMAC_CF_PARAM_t cf_param; // 0x3010 - TXMAC_TXTEST_t tx_test; // 0x3014 - TXMAC_ERR_t err; // 0x3018 - TXMAC_ERR_INT_t err_int; // 0x301C - TXMAC_BP_CTRL_t bp_ctrl; // 0x3020 +typedef struct _TXMAC_t { /* Location: */ + TXMAC_CTL_t ctl; /* 0x3000 */ + TXMAC_SHADOW_PTR_t shadow_ptr; /* 0x3004 */ + TXMAC_ERR_CNT_t err_cnt; /* 0x3008 */ + TXMAC_MAX_FILL_t max_fill; /* 0x300C */ + TXMAC_CF_PARAM_t cf_param; /* 0x3010 */ + TXMAC_TXTEST_t tx_test; /* 0x3014 */ + TXMAC_ERR_t err; /* 0x3018 */ + TXMAC_ERR_INT_t err_int; /* 0x301C */ + TXMAC_BP_CTRL_t bp_ctrl; /* 0x3020 */ } TXMAC_t, *PTXMAC_t; /* END OF TXMAC REGISTER ADDRESS MAP */ @@ -1125,23 +889,23 @@ typedef union _RXMAC_CTRL_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 reserved:25; // bits 7-31 - u32 rxmac_int_disable:1; // bit 6 - u32 async_disable:1; // bit 5 - u32 mif_disable:1; // bit 4 - u32 wol_disable:1; // bit 3 - u32 pkt_filter_disable:1; // bit 2 - u32 mcif_disable:1; // bit 1 - u32 rxmac_en:1; // bit 0 + u32 reserved:25; /* bits 7-31 */ + u32 rxmac_int_disable:1; /* bit 6 */ + u32 async_disable:1; /* bit 5 */ + u32 mif_disable:1; /* bit 4 */ + u32 wol_disable:1; /* bit 3 */ + u32 pkt_filter_disable:1; /* bit 2 */ + u32 mcif_disable:1; /* bit 1 */ + u32 rxmac_en:1; /* bit 0 */ #else - u32 rxmac_en:1; // bit 0 - u32 mcif_disable:1; // bit 1 - u32 pkt_filter_disable:1; // bit 2 - u32 wol_disable:1; // bit 3 - u32 mif_disable:1; // bit 4 - u32 async_disable:1; // bit 5 - u32 rxmac_int_disable:1; // bit 6 - u32 reserved:25; // bits 7-31 + u32 rxmac_en:1; /* bit 0 */ + u32 mcif_disable:1; /* bit 1 */ + u32 pkt_filter_disable:1; /* bit 2 */ + u32 wol_disable:1; /* bit 3 */ + u32 mif_disable:1; /* bit 4 */ + u32 async_disable:1; /* bit 5 */ + u32 rxmac_int_disable:1; /* bit 6 */ + u32 reserved:25; /* bits 7-31 */ #endif } bits; } RXMAC_CTRL_t, *PRXMAC_CTRL_t; @@ -1154,35 +918,35 @@ typedef union _RXMAC_WOL_CTL_CRC0_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 crc0:16; // bits 16-31 - u32 reserve:4; // bits 12-15 - u32 ignore_pp:1; // bit 11 - u32 ignore_mp:1; // bit 10 - u32 clr_intr:1; // bit 9 - u32 ignore_link_chg:1; // bit 8 - u32 ignore_uni:1; // bit 7 - u32 ignore_multi:1; // bit 6 - u32 ignore_broad:1; // bit 5 - u32 valid_crc4:1; // bit 4 - u32 valid_crc3:1; // bit 3 - u32 valid_crc2:1; // bit 2 - u32 valid_crc1:1; // bit 1 - u32 valid_crc0:1; // bit 0 -#else - u32 valid_crc0:1; // bit 0 - u32 valid_crc1:1; // bit 1 - u32 valid_crc2:1; // bit 2 - u32 valid_crc3:1; // bit 3 - u32 valid_crc4:1; // bit 4 - u32 ignore_broad:1; // bit 5 - u32 ignore_multi:1; // bit 6 - u32 ignore_uni:1; // bit 7 - u32 ignore_link_chg:1; // bit 8 - u32 clr_intr:1; // bit 9 - u32 ignore_mp:1; // bit 10 - u32 ignore_pp:1; // bit 11 - u32 reserve:4; // bits 12-15 - u32 crc0:16; // bits 16-31 + u32 crc0:16; /* bits 16-31 */ + u32 reserve:4; /* bits 12-15 */ + u32 ignore_pp:1; /* bit 11 */ + u32 ignore_mp:1; /* bit 10 */ + u32 clr_intr:1; /* bit 9 */ + u32 ignore_link_chg:1; /* bit 8 */ + u32 ignore_uni:1; /* bit 7 */ + u32 ignore_multi:1; /* bit 6 */ + u32 ignore_broad:1; /* bit 5 */ + u32 valid_crc4:1; /* bit 4 */ + u32 valid_crc3:1; /* bit 3 */ + u32 valid_crc2:1; /* bit 2 */ + u32 valid_crc1:1; /* bit 1 */ + u32 valid_crc0:1; /* bit 0 */ +#else + u32 valid_crc0:1; /* bit 0 */ + u32 valid_crc1:1; /* bit 1 */ + u32 valid_crc2:1; /* bit 2 */ + u32 valid_crc3:1; /* bit 3 */ + u32 valid_crc4:1; /* bit 4 */ + u32 ignore_broad:1; /* bit 5 */ + u32 ignore_multi:1; /* bit 6 */ + u32 ignore_uni:1; /* bit 7 */ + u32 ignore_link_chg:1; /* bit 8 */ + u32 clr_intr:1; /* bit 9 */ + u32 ignore_mp:1; /* bit 10 */ + u32 ignore_pp:1; /* bit 11 */ + u32 reserve:4; /* bits 12-15 */ + u32 crc0:16; /* bits 16-31 */ #endif } bits; } RXMAC_WOL_CTL_CRC0_t, *PRXMAC_WOL_CTL_CRC0_t; @@ -1195,11 +959,11 @@ typedef union _RXMAC_WOL_CRC12_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 crc2:16; // bits 16-31 - u32 crc1:16; // bits 0-15 + u32 crc2:16; /* bits 16-31 */ + u32 crc1:16; /* bits 0-15 */ #else - u32 crc1:16; // bits 0-15 - u32 crc2:16; // bits 16-31 + u32 crc1:16; /* bits 0-15 */ + u32 crc2:16; /* bits 16-31 */ #endif } bits; } RXMAC_WOL_CRC12_t, *PRXMAC_WOL_CRC12_t; @@ -1212,11 +976,11 @@ typedef union _RXMAC_WOL_CRC34_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 crc4:16; // bits 16-31 - u32 crc3:16; // bits 0-15 + u32 crc4:16; /* bits 16-31 */ + u32 crc3:16; /* bits 0-15 */ #else - u32 crc3:16; // bits 0-15 - u32 crc4:16; // bits 16-31 + u32 crc3:16; /* bits 0-15 */ + u32 crc4:16; /* bits 16-31 */ #endif } bits; } RXMAC_WOL_CRC34_t, *PRXMAC_WOL_CRC34_t; @@ -1229,15 +993,15 @@ typedef union _RXMAC_WOL_SA_LO_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 sa3:8; // bits 24-31 - u32 sa4:8; // bits 16-23 - u32 sa5:8; // bits 8-15 - u32 sa6:8; // bits 0-7 + u32 sa3:8; /* bits 24-31 */ + u32 sa4:8; /* bits 16-23 */ + u32 sa5:8; /* bits 8-15 */ + u32 sa6:8; /* bits 0-7 */ #else - u32 sa6:8; // bits 0-7 - u32 sa5:8; // bits 8-15 - u32 sa4:8; // bits 16-23 - u32 sa3:8; // bits 24-31 + u32 sa6:8; /* bits 0-7 */ + u32 sa5:8; /* bits 8-15 */ + u32 sa4:8; /* bits 16-23 */ + u32 sa3:8; /* bits 24-31 */ #endif } bits; } RXMAC_WOL_SA_LO_t, *PRXMAC_WOL_SA_LO_t; @@ -1250,13 +1014,13 @@ typedef union _RXMAC_WOL_SA_HI_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 reserved:16; // bits 16-31 - u32 sa1:8; // bits 8-15 - u32 sa2:8; // bits 0-7 + u32 reserved:16; /* bits 16-31 */ + u32 sa1:8; /* bits 8-15 */ + u32 sa2:8; /* bits 0-7 */ #else - u32 sa2:8; // bits 0-7 - u32 sa1:8; // bits 8-15 - u32 reserved:16; // bits 16-31 + u32 sa2:8; /* bits 0-7 */ + u32 sa1:8; /* bits 8-15 */ + u32 reserved:16; /* bits 16-31 */ #endif } bits; } RXMAC_WOL_SA_HI_t, *PRXMAC_WOL_SA_HI_t; @@ -1275,15 +1039,15 @@ typedef union _RXMAC_UNI_PF_ADDR1_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 addr1_3:8; // bits 24-31 - u32 addr1_4:8; // bits 16-23 - u32 addr1_5:8; // bits 8-15 - u32 addr1_6:8; // bits 0-7 + u32 addr1_3:8; /* bits 24-31 */ + u32 addr1_4:8; /* bits 16-23 */ + u32 addr1_5:8; /* bits 8-15 */ + u32 addr1_6:8; /* bits 0-7 */ #else - u32 addr1_6:8; // bits 0-7 - u32 addr1_5:8; // bits 8-15 - u32 addr1_4:8; // bits 16-23 - u32 addr1_3:8; // bits 24-31 + u32 addr1_6:8; /* bits 0-7 */ + u32 addr1_5:8; /* bits 8-15 */ + u32 addr1_4:8; /* bits 16-23 */ + u32 addr1_3:8; /* bits 24-31 */ #endif } bits; } RXMAC_UNI_PF_ADDR1_t, *PRXMAC_UNI_PF_ADDR1_t; @@ -1296,15 +1060,15 @@ typedef union _RXMAC_UNI_PF_ADDR2_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 addr2_3:8; // bits 24-31 - u32 addr2_4:8; // bits 16-23 - u32 addr2_5:8; // bits 8-15 - u32 addr2_6:8; // bits 0-7 + u32 addr2_3:8; /* bits 24-31 */ + u32 addr2_4:8; /* bits 16-23 */ + u32 addr2_5:8; /* bits 8-15 */ + u32 addr2_6:8; /* bits 0-7 */ #else - u32 addr2_6:8; // bits 0-7 - u32 addr2_5:8; // bits 8-15 - u32 addr2_4:8; // bits 16-23 - u32 addr2_3:8; // bits 24-31 + u32 addr2_6:8; /* bits 0-7 */ + u32 addr2_5:8; /* bits 8-15 */ + u32 addr2_4:8; /* bits 16-23 */ + u32 addr2_3:8; /* bits 24-31 */ #endif } bits; } RXMAC_UNI_PF_ADDR2_t, *PRXMAC_UNI_PF_ADDR2_t; @@ -1317,15 +1081,15 @@ typedef union _RXMAC_UNI_PF_ADDR3_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 addr2_1:8; // bits 24-31 - u32 addr2_2:8; // bits 16-23 - u32 addr1_1:8; // bits 8-15 - u32 addr1_2:8; // bits 0-7 + u32 addr2_1:8; /* bits 24-31 */ + u32 addr2_2:8; /* bits 16-23 */ + u32 addr1_1:8; /* bits 8-15 */ + u32 addr1_2:8; /* bits 0-7 */ #else - u32 addr1_2:8; // bits 0-7 - u32 addr1_1:8; // bits 8-15 - u32 addr2_2:8; // bits 16-23 - u32 addr2_1:8; // bits 24-31 + u32 addr1_2:8; /* bits 0-7 */ + u32 addr1_1:8; /* bits 8-15 */ + u32 addr2_2:8; /* bits 16-23 */ + u32 addr2_1:8; /* bits 24-31 */ #endif } bits; } RXMAC_UNI_PF_ADDR3_t, *PRXMAC_UNI_PF_ADDR3_t; @@ -1344,21 +1108,21 @@ typedef union _RXMAC_PF_CTRL_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 unused2:9; // bits 23-31 - u32 min_pkt_size:7; // bits 16-22 - u32 unused1:12; // bits 4-15 - u32 filter_frag_en:1; // bit 3 - u32 filter_uni_en:1; // bit 2 - u32 filter_multi_en:1; // bit 1 - u32 filter_broad_en:1; // bit 0 + u32 unused2:9; /* bits 23-31 */ + u32 min_pkt_size:7; /* bits 16-22 */ + u32 unused1:12; /* bits 4-15 */ + u32 filter_frag_en:1; /* bit 3 */ + u32 filter_uni_en:1; /* bit 2 */ + u32 filter_multi_en:1; /* bit 1 */ + u32 filter_broad_en:1; /* bit 0 */ #else - u32 filter_broad_en:1; // bit 0 - u32 filter_multi_en:1; // bit 1 - u32 filter_uni_en:1; // bit 2 - u32 filter_frag_en:1; // bit 3 - u32 unused1:12; // bits 4-15 - u32 min_pkt_size:7; // bits 16-22 - u32 unused2:9; // bits 23-31 + u32 filter_broad_en:1; /* bit 0 */ + u32 filter_multi_en:1; /* bit 1 */ + u32 filter_uni_en:1; /* bit 2 */ + u32 filter_frag_en:1; /* bit 3 */ + u32 unused1:12; /* bits 4-15 */ + u32 min_pkt_size:7; /* bits 16-22 */ + u32 unused2:9; /* bits 23-31 */ #endif } bits; } RXMAC_PF_CTRL_t, *PRXMAC_PF_CTRL_t; @@ -1371,15 +1135,15 @@ typedef union _RXMAC_MCIF_CTRL_MAX_SEG_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 reserved:22; // bits 10-31 - u32 max_size:8; // bits 2-9 - u32 fc_en:1; // bit 1 - u32 seg_en:1; // bit 0 + u32 reserved:22; /* bits 10-31 */ + u32 max_size:8; /* bits 2-9 */ + u32 fc_en:1; /* bit 1 */ + u32 seg_en:1; /* bit 0 */ #else - u32 seg_en:1; // bit 0 - u32 fc_en:1; // bit 1 - u32 max_size:8; // bits 2-9 - u32 reserved:22; // bits 10-31 + u32 seg_en:1; /* bit 0 */ + u32 fc_en:1; /* bit 1 */ + u32 max_size:8; /* bits 2-9 */ + u32 reserved:22; /* bits 10-31 */ #endif } bits; } RXMAC_MCIF_CTRL_MAX_SEG_t, *PRXMAC_MCIF_CTRL_MAX_SEG_t; @@ -1392,15 +1156,15 @@ typedef union _RXMAC_MCIF_WATER_MARK_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 reserved2:6; // bits 26-31 - u32 mark_hi:10; // bits 16-25 - u32 reserved1:6; // bits 10-15 - u32 mark_lo:10; // bits 0-9 + u32 reserved2:6; /* bits 26-31 */ + u32 mark_hi:10; /* bits 16-25 */ + u32 reserved1:6; /* bits 10-15 */ + u32 mark_lo:10; /* bits 0-9 */ #else - u32 mark_lo:10; // bits 0-9 - u32 reserved1:6; // bits 10-15 - u32 mark_hi:10; // bits 16-25 - u32 reserved2:6; // bits 26-31 + u32 mark_lo:10; /* bits 0-9 */ + u32 reserved1:6; /* bits 10-15 */ + u32 mark_hi:10; /* bits 16-25 */ + u32 reserved2:6; /* bits 26-31 */ #endif } bits; } RXMAC_MCIF_WATER_MARK_t, *PRXMAC_MCIF_WATER_MARK_t; @@ -1413,15 +1177,15 @@ typedef union _RXMAC_RXQ_DIAG_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 reserved2:6; // bits 26-31 - u32 rd_ptr:10; // bits 16-25 - u32 reserved1:6; // bits 10-15 - u32 wr_ptr:10; // bits 0-9 + u32 reserved2:6; /* bits 26-31 */ + u32 rd_ptr:10; /* bits 16-25 */ + u32 reserved1:6; /* bits 10-15 */ + u32 wr_ptr:10; /* bits 0-9 */ #else - u32 wr_ptr:10; // bits 0-9 - u32 reserved1:6; // bits 10-15 - u32 rd_ptr:10; // bits 16-25 - u32 reserved2:6; // bits 26-31 + u32 wr_ptr:10; /* bits 0-9 */ + u32 reserved1:6; /* bits 10-15 */ + u32 rd_ptr:10; /* bits 16-25 */ + u32 reserved2:6; /* bits 26-31 */ #endif } bits; } RXMAC_RXQ_DIAG_t, *PRXMAC_RXQ_DIAG_t; @@ -1434,15 +1198,15 @@ typedef union _RXMAC_SPACE_AVAIL_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 reserved2:15; // bits 17-31 - u32 space_avail_en:1; // bit 16 - u32 reserved1:6; // bits 10-15 - u32 space_avail:10; // bits 0-9 + u32 reserved2:15; /* bits 17-31 */ + u32 space_avail_en:1; /* bit 16 */ + u32 reserved1:6; /* bits 10-15 */ + u32 space_avail:10; /* bits 0-9 */ #else - u32 space_avail:10; // bits 0-9 - u32 reserved1:6; // bits 10-15 - u32 space_avail_en:1; // bit 16 - u32 reserved2:15; // bits 17-31 + u32 space_avail:10; /* bits 0-9 */ + u32 reserved1:6; /* bits 10-15 */ + u32 space_avail_en:1; /* bit 16 */ + u32 reserved2:15; /* bits 17-31 */ #endif } bits; } RXMAC_SPACE_AVAIL_t, *PRXMAC_SPACE_AVAIL_t; @@ -1455,13 +1219,13 @@ typedef union _RXMAC_MIF_CTL_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 reserve:14; // bits 18-31 - u32 drop_pkt_en:1; // bit 17 - u32 drop_pkt_mask:17; // bits 0-16 + u32 reserve:14; /* bits 18-31 */ + u32 drop_pkt_en:1; /* bit 17 */ + u32 drop_pkt_mask:17; /* bits 0-16 */ #else - u32 drop_pkt_mask:17; // bits 0-16 - u32 drop_pkt_en:1; // bit 17 - u32 reserve:14; // bits 18-31 + u32 drop_pkt_mask:17; /* bits 0-16 */ + u32 drop_pkt_en:1; /* bit 17 */ + u32 reserve:14; /* bits 18-31 */ #endif } bits; } RXMAC_MIF_CTL_t, *PRXMAC_MIF_CTL_t; @@ -1474,17 +1238,17 @@ typedef union _RXMAC_ERROR_REG_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 reserve:28; // bits 4-31 - u32 mif:1; // bit 3 - u32 async:1; // bit 2 - u32 pkt_filter:1; // bit 1 - u32 mcif:1; // bit 0 + u32 reserve:28; /* bits 4-31 */ + u32 mif:1; /* bit 3 */ + u32 async:1; /* bit 2 */ + u32 pkt_filter:1; /* bit 1 */ + u32 mcif:1; /* bit 0 */ #else - u32 mcif:1; // bit 0 - u32 pkt_filter:1; // bit 1 - u32 async:1; // bit 2 - u32 mif:1; // bit 3 - u32 reserve:28; // bits 4-31 + u32 mcif:1; /* bit 0 */ + u32 pkt_filter:1; /* bit 1 */ + u32 async:1; /* bit 2 */ + u32 mif:1; /* bit 3 */ + u32 reserve:28; /* bits 4-31 */ #endif } bits; } RXMAC_ERROR_REG_t, *PRXMAC_ERROR_REG_t; @@ -1492,48 +1256,48 @@ typedef union _RXMAC_ERROR_REG_t { /* * Rx MAC Module of JAGCore Address Mapping */ -typedef struct _RXMAC_t { // Location: - RXMAC_CTRL_t ctrl; // 0x4000 - RXMAC_WOL_CTL_CRC0_t crc0; // 0x4004 - RXMAC_WOL_CRC12_t crc12; // 0x4008 - RXMAC_WOL_CRC34_t crc34; // 0x400C - RXMAC_WOL_SA_LO_t sa_lo; // 0x4010 - RXMAC_WOL_SA_HI_t sa_hi; // 0x4014 - u32 mask0_word0; // 0x4018 - u32 mask0_word1; // 0x401C - u32 mask0_word2; // 0x4020 - u32 mask0_word3; // 0x4024 - u32 mask1_word0; // 0x4028 - u32 mask1_word1; // 0x402C - u32 mask1_word2; // 0x4030 - u32 mask1_word3; // 0x4034 - u32 mask2_word0; // 0x4038 - u32 mask2_word1; // 0x403C - u32 mask2_word2; // 0x4040 - u32 mask2_word3; // 0x4044 - u32 mask3_word0; // 0x4048 - u32 mask3_word1; // 0x404C - u32 mask3_word2; // 0x4050 - u32 mask3_word3; // 0x4054 - u32 mask4_word0; // 0x4058 - u32 mask4_word1; // 0x405C - u32 mask4_word2; // 0x4060 - u32 mask4_word3; // 0x4064 - RXMAC_UNI_PF_ADDR1_t uni_pf_addr1; // 0x4068 - RXMAC_UNI_PF_ADDR2_t uni_pf_addr2; // 0x406C - RXMAC_UNI_PF_ADDR3_t uni_pf_addr3; // 0x4070 - u32 multi_hash1; // 0x4074 - u32 multi_hash2; // 0x4078 - u32 multi_hash3; // 0x407C - u32 multi_hash4; // 0x4080 - RXMAC_PF_CTRL_t pf_ctrl; // 0x4084 - RXMAC_MCIF_CTRL_MAX_SEG_t mcif_ctrl_max_seg; // 0x4088 - RXMAC_MCIF_WATER_MARK_t mcif_water_mark; // 0x408C - RXMAC_RXQ_DIAG_t rxq_diag; // 0x4090 - RXMAC_SPACE_AVAIL_t space_avail; // 0x4094 - - RXMAC_MIF_CTL_t mif_ctrl; // 0x4098 - RXMAC_ERROR_REG_t err_reg; // 0x409C +typedef struct _RXMAC_t { /* Location: */ + RXMAC_CTRL_t ctrl; /* 0x4000 */ + RXMAC_WOL_CTL_CRC0_t crc0; /* 0x4004 */ + RXMAC_WOL_CRC12_t crc12; /* 0x4008 */ + RXMAC_WOL_CRC34_t crc34; /* 0x400C */ + RXMAC_WOL_SA_LO_t sa_lo; /* 0x4010 */ + RXMAC_WOL_SA_HI_t sa_hi; /* 0x4014 */ + u32 mask0_word0; /* 0x4018 */ + u32 mask0_word1; /* 0x401C */ + u32 mask0_word2; /* 0x4020 */ + u32 mask0_word3; /* 0x4024 */ + u32 mask1_word0; /* 0x4028 */ + u32 mask1_word1; /* 0x402C */ + u32 mask1_word2; /* 0x4030 */ + u32 mask1_word3; /* 0x4034 */ + u32 mask2_word0; /* 0x4038 */ + u32 mask2_word1; /* 0x403C */ + u32 mask2_word2; /* 0x4040 */ + u32 mask2_word3; /* 0x4044 */ + u32 mask3_word0; /* 0x4048 */ + u32 mask3_word1; /* 0x404C */ + u32 mask3_word2; /* 0x4050 */ + u32 mask3_word3; /* 0x4054 */ + u32 mask4_word0; /* 0x4058 */ + u32 mask4_word1; /* 0x405C */ + u32 mask4_word2; /* 0x4060 */ + u32 mask4_word3; /* 0x4064 */ + RXMAC_UNI_PF_ADDR1_t uni_pf_addr1; /* 0x4068 */ + RXMAC_UNI_PF_ADDR2_t uni_pf_addr2; /* 0x406C */ + RXMAC_UNI_PF_ADDR3_t uni_pf_addr3; /* 0x4070 */ + u32 multi_hash1; /* 0x4074 */ + u32 multi_hash2; /* 0x4078 */ + u32 multi_hash3; /* 0x407C */ + u32 multi_hash4; /* 0x4080 */ + RXMAC_PF_CTRL_t pf_ctrl; /* 0x4084 */ + RXMAC_MCIF_CTRL_MAX_SEG_t mcif_ctrl_max_seg; /* 0x4088 */ + RXMAC_MCIF_WATER_MARK_t mcif_water_mark; /* 0x408C */ + RXMAC_RXQ_DIAG_t rxq_diag; /* 0x4090 */ + RXMAC_SPACE_AVAIL_t space_avail; /* 0x4094 */ + + RXMAC_MIF_CTL_t mif_ctrl; /* 0x4098 */ + RXMAC_ERROR_REG_t err_reg; /* 0x409C */ } RXMAC_t, *PRXMAC_t; /* END OF TXMAC REGISTER ADDRESS MAP */ @@ -1549,39 +1313,39 @@ typedef union _MAC_CFG1_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 soft_reset:1; // bit 31 - u32 sim_reset:1; // bit 30 - u32 reserved3:10; // bits 20-29 - u32 reset_rx_mc:1; // bit 19 - u32 reset_tx_mc:1; // bit 18 - u32 reset_rx_fun:1; // bit 17 - u32 reset_tx_fun:1; // bit 16 - u32 reserved2:7; // bits 9-15 - u32 loop_back:1; // bit 8 - u32 reserved1:2; // bits 6-7 - u32 rx_flow:1; // bit 5 - u32 tx_flow:1; // bit 4 - u32 syncd_rx_en:1; // bit 3 - u32 rx_enable:1; // bit 2 - u32 syncd_tx_en:1; // bit 1 - u32 tx_enable:1; // bit 0 -#else - u32 tx_enable:1; // bit 0 - u32 syncd_tx_en:1; // bit 1 - u32 rx_enable:1; // bit 2 - u32 syncd_rx_en:1; // bit 3 - u32 tx_flow:1; // bit 4 - u32 rx_flow:1; // bit 5 - u32 reserved1:2; // bits 6-7 - u32 loop_back:1; // bit 8 - u32 reserved2:7; // bits 9-15 - u32 reset_tx_fun:1; // bit 16 - u32 reset_rx_fun:1; // bit 17 - u32 reset_tx_mc:1; // bit 18 - u32 reset_rx_mc:1; // bit 19 - u32 reserved3:10; // bits 20-29 - u32 sim_reset:1; // bit 30 - u32 soft_reset:1; // bit 31 + u32 soft_reset:1; /* bit 31 */ + u32 sim_reset:1; /* bit 30 */ + u32 reserved3:10; /* bits 20-29 */ + u32 reset_rx_mc:1; /* bit 19 */ + u32 reset_tx_mc:1; /* bit 18 */ + u32 reset_rx_fun:1; /* bit 17 */ + u32 reset_tx_fun:1; /* bit 16 */ + u32 reserved2:7; /* bits 9-15 */ + u32 loop_back:1; /* bit 8 */ + u32 reserved1:2; /* bits 6-7 */ + u32 rx_flow:1; /* bit 5 */ + u32 tx_flow:1; /* bit 4 */ + u32 syncd_rx_en:1; /* bit 3 */ + u32 rx_enable:1; /* bit 2 */ + u32 syncd_tx_en:1; /* bit 1 */ + u32 tx_enable:1; /* bit 0 */ +#else + u32 tx_enable:1; /* bit 0 */ + u32 syncd_tx_en:1; /* bit 1 */ + u32 rx_enable:1; /* bit 2 */ + u32 syncd_rx_en:1; /* bit 3 */ + u32 tx_flow:1; /* bit 4 */ + u32 rx_flow:1; /* bit 5 */ + u32 reserved1:2; /* bits 6-7 */ + u32 loop_back:1; /* bit 8 */ + u32 reserved2:7; /* bits 9-15 */ + u32 reset_tx_fun:1; /* bit 16 */ + u32 reset_rx_fun:1; /* bit 17 */ + u32 reset_tx_mc:1; /* bit 18 */ + u32 reset_rx_mc:1; /* bit 19 */ + u32 reserved3:10; /* bits 20-29 */ + u32 sim_reset:1; /* bit 30 */ + u32 soft_reset:1; /* bit 31 */ #endif } bits; } MAC_CFG1_t, *PMAC_CFG1_t; @@ -1594,29 +1358,29 @@ typedef union _MAC_CFG2_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 reserved3:16; // bits 16-31 - u32 preamble_len:4; // bits 12-15 - u32 reserved2:2; // bits 10-11 - u32 if_mode:2; // bits 8-9 - u32 reserved1:2; // bits 6-7 - u32 huge_frame:1; // bit 5 - u32 len_check:1; // bit 4 - u32 undefined:1; // bit 3 - u32 pad_crc:1; // bit 2 - u32 crc_enable:1; // bit 1 - u32 full_duplex:1; // bit 0 -#else - u32 full_duplex:1; // bit 0 - u32 crc_enable:1; // bit 1 - u32 pad_crc:1; // bit 2 - u32 undefined:1; // bit 3 - u32 len_check:1; // bit 4 - u32 huge_frame:1; // bit 5 - u32 reserved1:2; // bits 6-7 - u32 if_mode:2; // bits 8-9 - u32 reserved2:2; // bits 10-11 - u32 preamble_len:4; // bits 12-15 - u32 reserved3:16; // bits 16-31 + u32 reserved3:16; /* bits 16-31 */ + u32 preamble_len:4; /* bits 12-15 */ + u32 reserved2:2; /* bits 10-11 */ + u32 if_mode:2; /* bits 8-9 */ + u32 reserved1:2; /* bits 6-7 */ + u32 huge_frame:1; /* bit 5 */ + u32 len_check:1; /* bit 4 */ + u32 undefined:1; /* bit 3 */ + u32 pad_crc:1; /* bit 2 */ + u32 crc_enable:1; /* bit 1 */ + u32 full_duplex:1; /* bit 0 */ +#else + u32 full_duplex:1; /* bit 0 */ + u32 crc_enable:1; /* bit 1 */ + u32 pad_crc:1; /* bit 2 */ + u32 undefined:1; /* bit 3 */ + u32 len_check:1; /* bit 4 */ + u32 huge_frame:1; /* bit 5 */ + u32 reserved1:2; /* bits 6-7 */ + u32 if_mode:2; /* bits 8-9 */ + u32 reserved2:2; /* bits 10-11 */ + u32 preamble_len:4; /* bits 12-15 */ + u32 reserved3:16; /* bits 16-31 */ #endif } bits; } MAC_CFG2_t, *PMAC_CFG2_t; @@ -1629,21 +1393,21 @@ typedef union _MAC_IPG_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 reserved:1; // bit 31 - u32 non_B2B_ipg_1:7; // bits 24-30 - u32 undefined2:1; // bit 23 - u32 non_B2B_ipg_2:7; // bits 16-22 - u32 min_ifg_enforce:8; // bits 8-15 - u32 undefined1:1; // bit 7 - u32 B2B_ipg:7; // bits 0-6 + u32 reserved:1; /* bit 31 */ + u32 non_B2B_ipg_1:7; /* bits 24-30 */ + u32 undefined2:1; /* bit 23 */ + u32 non_B2B_ipg_2:7; /* bits 16-22 */ + u32 min_ifg_enforce:8; /* bits 8-15 */ + u32 undefined1:1; /* bit 7 */ + u32 B2B_ipg:7; /* bits 0-6 */ #else - u32 B2B_ipg:7; // bits 0-6 - u32 undefined1:1; // bit 7 - u32 min_ifg_enforce:8; // bits 8-15 - u32 non_B2B_ipg_2:7; // bits 16-22 - u32 undefined2:1; // bit 23 - u32 non_B2B_ipg_1:7; // bits 24-30 - u32 reserved:1; // bit 31 + u32 B2B_ipg:7; /* bits 0-6 */ + u32 undefined1:1; /* bit 7 */ + u32 min_ifg_enforce:8; /* bits 8-15 */ + u32 non_B2B_ipg_2:7; /* bits 16-22 */ + u32 undefined2:1; /* bit 23 */ + u32 non_B2B_ipg_1:7; /* bits 24-30 */ + u32 reserved:1; /* bit 31 */ #endif } bits; } MAC_IPG_t, *PMAC_IPG_t; @@ -1656,25 +1420,25 @@ typedef union _MAC_HFDP_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 reserved2:8; // bits 24-31 - u32 alt_beb_trunc:4; // bits 23-20 - u32 alt_beb_enable:1; // bit 19 - u32 bp_no_backoff:1; // bit 18 - u32 no_backoff:1; // bit 17 - u32 excess_defer:1; // bit 16 - u32 rexmit_max:4; // bits 12-15 - u32 reserved1:2; // bits 10-11 - u32 coll_window:10; // bits 0-9 + u32 reserved2:8; /* bits 24-31 */ + u32 alt_beb_trunc:4; /* bits 23-20 */ + u32 alt_beb_enable:1; /* bit 19 */ + u32 bp_no_backoff:1; /* bit 18 */ + u32 no_backoff:1; /* bit 17 */ + u32 excess_defer:1; /* bit 16 */ + u32 rexmit_max:4; /* bits 12-15 */ + u32 reserved1:2; /* bits 10-11 */ + u32 coll_window:10; /* bits 0-9 */ #else - u32 coll_window:10; // bits 0-9 - u32 reserved1:2; // bits 10-11 - u32 rexmit_max:4; // bits 12-15 - u32 excess_defer:1; // bit 16 - u32 no_backoff:1; // bit 17 - u32 bp_no_backoff:1; // bit 18 - u32 alt_beb_enable:1; // bit 19 - u32 alt_beb_trunc:4; // bits 23-20 - u32 reserved2:8; // bits 24-31 + u32 coll_window:10; /* bits 0-9 */ + u32 reserved1:2; /* bits 10-11 */ + u32 rexmit_max:4; /* bits 12-15 */ + u32 excess_defer:1; /* bit 16 */ + u32 no_backoff:1; /* bit 17 */ + u32 bp_no_backoff:1; /* bit 18 */ + u32 alt_beb_enable:1; /* bit 19 */ + u32 alt_beb_trunc:4; /* bits 23-20 */ + u32 reserved2:8; /* bits 24-31 */ #endif } bits; } MAC_HFDP_t, *PMAC_HFDP_t; @@ -1687,11 +1451,11 @@ typedef union _MAC_MAX_FM_LEN_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 reserved:16; // bits 16-31 - u32 max_len:16; // bits 0-15 + u32 reserved:16; /* bits 16-31 */ + u32 max_len:16; /* bits 0-15 */ #else - u32 max_len:16; // bits 0-15 - u32 reserved:16; // bits 16-31 + u32 max_len:16; /* bits 0-15 */ + u32 reserved:16; /* bits 16-31 */ #endif } bits; } MAC_MAX_FM_LEN_t, *PMAC_MAX_FM_LEN_t; @@ -1710,11 +1474,11 @@ typedef union _MAC_TEST_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 unused:29; // bits 3-31 - u32 mac_test:3; // bits 0-2 + u32 unused:29; /* bits 3-31 */ + u32 mac_test:3; /* bits 0-2 */ #else - u32 mac_test:3; // bits 0-2 - u32 unused:29; // bits 3-31 + u32 mac_test:3; /* bits 0-2 */ + u32 unused:29; /* bits 3-31 */ #endif } bits; } MAC_TEST_t, *PMAC_TEST_t; @@ -1727,19 +1491,19 @@ typedef union _MII_MGMT_CFG_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 reset_mii_mgmt:1; // bit 31 - u32 reserved:25; // bits 6-30 - u32 scan_auto_incremt:1; // bit 5 - u32 preamble_suppress:1; // bit 4 - u32 undefined:1; // bit 3 - u32 mgmt_clk_reset:3; // bits 0-2 + u32 reset_mii_mgmt:1; /* bit 31 */ + u32 reserved:25; /* bits 6-30 */ + u32 scan_auto_incremt:1; /* bit 5 */ + u32 preamble_suppress:1; /* bit 4 */ + u32 undefined:1; /* bit 3 */ + u32 mgmt_clk_reset:3; /* bits 0-2 */ #else - u32 mgmt_clk_reset:3; // bits 0-2 - u32 undefined:1; // bit 3 - u32 preamble_suppress:1; // bit 4 - u32 scan_auto_incremt:1; // bit 5 - u32 reserved:25; // bits 6-30 - u32 reset_mii_mgmt:1; // bit 31 + u32 mgmt_clk_reset:3; /* bits 0-2 */ + u32 undefined:1; /* bit 3 */ + u32 preamble_suppress:1; /* bit 4 */ + u32 scan_auto_incremt:1; /* bit 5 */ + u32 reserved:25; /* bits 6-30 */ + u32 reset_mii_mgmt:1; /* bit 31 */ #endif } bits; } MII_MGMT_CFG_t, *PMII_MGMT_CFG_t; @@ -1752,13 +1516,13 @@ typedef union _MII_MGMT_CMD_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 reserved:30; // bits 2-31 - u32 scan_cycle:1; // bit 1 - u32 read_cycle:1; // bit 0 + u32 reserved:30; /* bits 2-31 */ + u32 scan_cycle:1; /* bit 1 */ + u32 read_cycle:1; /* bit 0 */ #else - u32 read_cycle:1; // bit 0 - u32 scan_cycle:1; // bit 1 - u32 reserved:30; // bits 2-31 + u32 read_cycle:1; /* bit 0 */ + u32 scan_cycle:1; /* bit 1 */ + u32 reserved:30; /* bits 2-31 */ #endif } bits; } MII_MGMT_CMD_t, *PMII_MGMT_CMD_t; @@ -1771,15 +1535,15 @@ typedef union _MII_MGMT_ADDR_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 reserved2:19; // bit 13-31 - u32 phy_addr:5; // bits 8-12 - u32 reserved1:3; // bits 5-7 - u32 reg_addr:5; // bits 0-4 + u32 reserved2:19; /* bit 13-31 */ + u32 phy_addr:5; /* bits 8-12 */ + u32 reserved1:3; /* bits 5-7 */ + u32 reg_addr:5; /* bits 0-4 */ #else - u32 reg_addr:5; // bits 0-4 - u32 reserved1:3; // bits 5-7 - u32 phy_addr:5; // bits 8-12 - u32 reserved2:19; // bit 13-31 + u32 reg_addr:5; /* bits 0-4 */ + u32 reserved1:3; /* bits 5-7 */ + u32 phy_addr:5; /* bits 8-12 */ + u32 reserved2:19; /* bit 13-31 */ #endif } bits; } MII_MGMT_ADDR_t, *PMII_MGMT_ADDR_t; @@ -1792,11 +1556,11 @@ typedef union _MII_MGMT_CTRL_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 reserved:16; // bits 16-31 - u32 phy_ctrl:16; // bits 0-15 + u32 reserved:16; /* bits 16-31 */ + u32 phy_ctrl:16; /* bits 0-15 */ #else - u32 phy_ctrl:16; // bits 0-15 - u32 reserved:16; // bits 16-31 + u32 phy_ctrl:16; /* bits 0-15 */ + u32 reserved:16; /* bits 16-31 */ #endif } bits; } MII_MGMT_CTRL_t, *PMII_MGMT_CTRL_t; @@ -1809,11 +1573,11 @@ typedef union _MII_MGMT_STAT_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 reserved:16; // bits 16-31 - u32 phy_stat:16; // bits 0-15 + u32 reserved:16; /* bits 16-31 */ + u32 phy_stat:16; /* bits 0-15 */ #else - u32 phy_stat:16; // bits 0-15 - u32 reserved:16; // bits 16-31 + u32 phy_stat:16; /* bits 0-15 */ + u32 reserved:16; /* bits 16-31 */ #endif } bits; } MII_MGMT_STAT_t, *PMII_MGMT_STAT_t; @@ -1826,15 +1590,15 @@ typedef union _MII_MGMT_INDICATOR_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 reserved:29; // bits 3-31 - u32 not_valid:1; // bit 2 - u32 scanning:1; // bit 1 - u32 busy:1; // bit 0 + u32 reserved:29; /* bits 3-31 */ + u32 not_valid:1; /* bit 2 */ + u32 scanning:1; /* bit 1 */ + u32 busy:1; /* bit 0 */ #else - u32 busy:1; // bit 0 - u32 scanning:1; // bit 1 - u32 not_valid:1; // bit 2 - u32 reserved:29; // bits 3-31 + u32 busy:1; /* bit 0 */ + u32 scanning:1; /* bit 1 */ + u32 not_valid:1; /* bit 2 */ + u32 reserved:29; /* bits 3-31 */ #endif } bits; } MII_MGMT_INDICATOR_t, *PMII_MGMT_INDICATOR_t; @@ -1847,41 +1611,41 @@ typedef union _MAC_IF_CTRL_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 reset_if_module:1; // bit 31 - u32 reserved4:3; // bit 28-30 - u32 tbi_mode:1; // bit 27 - u32 ghd_mode:1; // bit 26 - u32 lhd_mode:1; // bit 25 - u32 phy_mode:1; // bit 24 - u32 reset_per_mii:1; // bit 23 - u32 reserved3:6; // bits 17-22 - u32 speed:1; // bit 16 - u32 reset_pe100x:1; // bit 15 - u32 reserved2:4; // bits 11-14 - u32 force_quiet:1; // bit 10 - u32 no_cipher:1; // bit 9 - u32 disable_link_fail:1; // bit 8 - u32 reset_gpsi:1; // bit 7 - u32 reserved1:6; // bits 1-6 - u32 enab_jab_protect:1; // bit 0 -#else - u32 enab_jab_protect:1; // bit 0 - u32 reserved1:6; // bits 1-6 - u32 reset_gpsi:1; // bit 7 - u32 disable_link_fail:1; // bit 8 - u32 no_cipher:1; // bit 9 - u32 force_quiet:1; // bit 10 - u32 reserved2:4; // bits 11-14 - u32 reset_pe100x:1; // bit 15 - u32 speed:1; // bit 16 - u32 reserved3:6; // bits 17-22 - u32 reset_per_mii:1; // bit 23 - u32 phy_mode:1; // bit 24 - u32 lhd_mode:1; // bit 25 - u32 ghd_mode:1; // bit 26 - u32 tbi_mode:1; // bit 27 - u32 reserved4:3; // bit 28-30 - u32 reset_if_module:1; // bit 31 + u32 reset_if_module:1; /* bit 31 */ + u32 reserved4:3; /* bit 28-30 */ + u32 tbi_mode:1; /* bit 27 */ + u32 ghd_mode:1; /* bit 26 */ + u32 lhd_mode:1; /* bit 25 */ + u32 phy_mode:1; /* bit 24 */ + u32 reset_per_mii:1; /* bit 23 */ + u32 reserved3:6; /* bits 17-22 */ + u32 speed:1; /* bit 16 */ + u32 reset_pe100x:1; /* bit 15 */ + u32 reserved2:4; /* bits 11-14 */ + u32 force_quiet:1; /* bit 10 */ + u32 no_cipher:1; /* bit 9 */ + u32 disable_link_fail:1; /* bit 8 */ + u32 reset_gpsi:1; /* bit 7 */ + u32 reserved1:6; /* bits 1-6 */ + u32 enab_jab_protect:1; /* bit 0 */ +#else + u32 enab_jab_protect:1; /* bit 0 */ + u32 reserved1:6; /* bits 1-6 */ + u32 reset_gpsi:1; /* bit 7 */ + u32 disable_link_fail:1; /* bit 8 */ + u32 no_cipher:1; /* bit 9 */ + u32 force_quiet:1; /* bit 10 */ + u32 reserved2:4; /* bits 11-14 */ + u32 reset_pe100x:1; /* bit 15 */ + u32 speed:1; /* bit 16 */ + u32 reserved3:6; /* bits 17-22 */ + u32 reset_per_mii:1; /* bit 23 */ + u32 phy_mode:1; /* bit 24 */ + u32 lhd_mode:1; /* bit 25 */ + u32 ghd_mode:1; /* bit 26 */ + u32 tbi_mode:1; /* bit 27 */ + u32 reserved4:3; /* bit 28-30 */ + u32 reset_if_module:1; /* bit 31 */ #endif } bits; } MAC_IF_CTRL_t, *PMAC_IF_CTRL_t; @@ -1894,29 +1658,29 @@ typedef union _MAC_IF_STAT_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 reserved:22; // bits 10-31 - u32 excess_defer:1; // bit 9 - u32 clash:1; // bit 8 - u32 phy_jabber:1; // bit 7 - u32 phy_link_ok:1; // bit 6 - u32 phy_full_duplex:1; // bit 5 - u32 phy_speed:1; // bit 4 - u32 pe100x_link_fail:1; // bit 3 - u32 pe10t_loss_carrie:1; // bit 2 - u32 pe10t_sqe_error:1; // bit 1 - u32 pe10t_jabber:1; // bit 0 -#else - u32 pe10t_jabber:1; // bit 0 - u32 pe10t_sqe_error:1; // bit 1 - u32 pe10t_loss_carrie:1; // bit 2 - u32 pe100x_link_fail:1; // bit 3 - u32 phy_speed:1; // bit 4 - u32 phy_full_duplex:1; // bit 5 - u32 phy_link_ok:1; // bit 6 - u32 phy_jabber:1; // bit 7 - u32 clash:1; // bit 8 - u32 excess_defer:1; // bit 9 - u32 reserved:22; // bits 10-31 + u32 reserved:22; /* bits 10-31 */ + u32 excess_defer:1; /* bit 9 */ + u32 clash:1; /* bit 8 */ + u32 phy_jabber:1; /* bit 7 */ + u32 phy_link_ok:1; /* bit 6 */ + u32 phy_full_duplex:1; /* bit 5 */ + u32 phy_speed:1; /* bit 4 */ + u32 pe100x_link_fail:1; /* bit 3 */ + u32 pe10t_loss_carrie:1; /* bit 2 */ + u32 pe10t_sqe_error:1; /* bit 1 */ + u32 pe10t_jabber:1; /* bit 0 */ +#else + u32 pe10t_jabber:1; /* bit 0 */ + u32 pe10t_sqe_error:1; /* bit 1 */ + u32 pe10t_loss_carrie:1; /* bit 2 */ + u32 pe100x_link_fail:1; /* bit 3 */ + u32 phy_speed:1; /* bit 4 */ + u32 phy_full_duplex:1; /* bit 5 */ + u32 phy_link_ok:1; /* bit 6 */ + u32 phy_jabber:1; /* bit 7 */ + u32 clash:1; /* bit 8 */ + u32 excess_defer:1; /* bit 9 */ + u32 reserved:22; /* bits 10-31 */ #endif } bits; } MAC_IF_STAT_t, *PMAC_IF_STAT_t; @@ -1929,15 +1693,15 @@ typedef union _MAC_STATION_ADDR1_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 Octet6:8; // bits 24-31 - u32 Octet5:8; // bits 16-23 - u32 Octet4:8; // bits 8-15 - u32 Octet3:8; // bits 0-7 + u32 Octet6:8; /* bits 24-31 */ + u32 Octet5:8; /* bits 16-23 */ + u32 Octet4:8; /* bits 8-15 */ + u32 Octet3:8; /* bits 0-7 */ #else - u32 Octet3:8; // bits 0-7 - u32 Octet4:8; // bits 8-15 - u32 Octet5:8; // bits 16-23 - u32 Octet6:8; // bits 24-31 + u32 Octet3:8; /* bits 0-7 */ + u32 Octet4:8; /* bits 8-15 */ + u32 Octet5:8; /* bits 16-23 */ + u32 Octet6:8; /* bits 24-31 */ #endif } bits; } MAC_STATION_ADDR1_t, *PMAC_STATION_ADDR1_t; @@ -1950,13 +1714,13 @@ typedef union _MAC_STATION_ADDR2_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 Octet2:8; // bits 24-31 - u32 Octet1:8; // bits 16-23 - u32 reserved:16; // bits 0-15 + u32 Octet2:8; /* bits 24-31 */ + u32 Octet1:8; /* bits 16-23 */ + u32 reserved:16; /* bits 0-15 */ #else - u32 reserved:16; // bit 0-15 - u32 Octet1:8; // bits 16-23 - u32 Octet2:8; // bits 24-31 + u32 reserved:16; /* bit 0-15 */ + u32 Octet1:8; /* bits 16-23 */ + u32 Octet2:8; /* bits 24-31 */ #endif } bits; } MAC_STATION_ADDR2_t, *PMAC_STATION_ADDR2_t; @@ -1964,25 +1728,25 @@ typedef union _MAC_STATION_ADDR2_t { /* * MAC Module of JAGCore Address Mapping */ -typedef struct _MAC_t { // Location: - MAC_CFG1_t cfg1; // 0x5000 - MAC_CFG2_t cfg2; // 0x5004 - MAC_IPG_t ipg; // 0x5008 - MAC_HFDP_t hfdp; // 0x500C - MAC_MAX_FM_LEN_t max_fm_len; // 0x5010 - u32 rsv1; // 0x5014 - u32 rsv2; // 0x5018 - MAC_TEST_t mac_test; // 0x501C - MII_MGMT_CFG_t mii_mgmt_cfg; // 0x5020 - MII_MGMT_CMD_t mii_mgmt_cmd; // 0x5024 - MII_MGMT_ADDR_t mii_mgmt_addr; // 0x5028 - MII_MGMT_CTRL_t mii_mgmt_ctrl; // 0x502C - MII_MGMT_STAT_t mii_mgmt_stat; // 0x5030 - MII_MGMT_INDICATOR_t mii_mgmt_indicator; // 0x5034 - MAC_IF_CTRL_t if_ctrl; // 0x5038 - MAC_IF_STAT_t if_stat; // 0x503C - MAC_STATION_ADDR1_t station_addr_1; // 0x5040 - MAC_STATION_ADDR2_t station_addr_2; // 0x5044 +typedef struct _MAC_t { /* Location: */ + MAC_CFG1_t cfg1; /* 0x5000 */ + MAC_CFG2_t cfg2; /* 0x5004 */ + MAC_IPG_t ipg; /* 0x5008 */ + MAC_HFDP_t hfdp; /* 0x500C */ + MAC_MAX_FM_LEN_t max_fm_len; /* 0x5010 */ + u32 rsv1; /* 0x5014 */ + u32 rsv2; /* 0x5018 */ + MAC_TEST_t mac_test; /* 0x501C */ + MII_MGMT_CFG_t mii_mgmt_cfg; /* 0x5020 */ + MII_MGMT_CMD_t mii_mgmt_cmd; /* 0x5024 */ + MII_MGMT_ADDR_t mii_mgmt_addr; /* 0x5028 */ + MII_MGMT_CTRL_t mii_mgmt_ctrl; /* 0x502C */ + MII_MGMT_STAT_t mii_mgmt_stat; /* 0x5030 */ + MII_MGMT_INDICATOR_t mii_mgmt_indicator; /* 0x5034 */ + MAC_IF_CTRL_t if_ctrl; /* 0x5038 */ + MAC_IF_STAT_t if_stat; /* 0x503C */ + MAC_STATION_ADDR1_t station_addr_1; /* 0x5040 */ + MAC_STATION_ADDR2_t station_addr_2; /* 0x5044 */ } MAC_t, *PMAC_t; /* END OF MAC REGISTER ADDRESS MAP */ @@ -1997,57 +1761,57 @@ typedef union _MAC_STAT_REG_1_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 tr64:1; // bit 31 - u32 tr127:1; // bit 30 - u32 tr255:1; // bit 29 - u32 tr511:1; // bit 28 - u32 tr1k:1; // bit 27 - u32 trmax:1; // bit 26 - u32 trmgv:1; // bit 25 - u32 unused:8; // bits 17-24 - u32 rbyt:1; // bit 16 - u32 rpkt:1; // bit 15 - u32 rfcs:1; // bit 14 - u32 rmca:1; // bit 13 - u32 rbca:1; // bit 12 - u32 rxcf:1; // bit 11 - u32 rxpf:1; // bit 10 - u32 rxuo:1; // bit 9 - u32 raln:1; // bit 8 - u32 rflr:1; // bit 7 - u32 rcde:1; // bit 6 - u32 rcse:1; // bit 5 - u32 rund:1; // bit 4 - u32 rovr:1; // bit 3 - u32 rfrg:1; // bit 2 - u32 rjbr:1; // bit 1 - u32 rdrp:1; // bit 0 -#else - u32 rdrp:1; // bit 0 - u32 rjbr:1; // bit 1 - u32 rfrg:1; // bit 2 - u32 rovr:1; // bit 3 - u32 rund:1; // bit 4 - u32 rcse:1; // bit 5 - u32 rcde:1; // bit 6 - u32 rflr:1; // bit 7 - u32 raln:1; // bit 8 - u32 rxuo:1; // bit 9 - u32 rxpf:1; // bit 10 - u32 rxcf:1; // bit 11 - u32 rbca:1; // bit 12 - u32 rmca:1; // bit 13 - u32 rfcs:1; // bit 14 - u32 rpkt:1; // bit 15 - u32 rbyt:1; // bit 16 - u32 unused:8; // bits 17-24 - u32 trmgv:1; // bit 25 - u32 trmax:1; // bit 26 - u32 tr1k:1; // bit 27 - u32 tr511:1; // bit 28 - u32 tr255:1; // bit 29 - u32 tr127:1; // bit 30 - u32 tr64:1; // bit 31 + u32 tr64:1; /* bit 31 */ + u32 tr127:1; /* bit 30 */ + u32 tr255:1; /* bit 29 */ + u32 tr511:1; /* bit 28 */ + u32 tr1k:1; /* bit 27 */ + u32 trmax:1; /* bit 26 */ + u32 trmgv:1; /* bit 25 */ + u32 unused:8; /* bits 17-24 */ + u32 rbyt:1; /* bit 16 */ + u32 rpkt:1; /* bit 15 */ + u32 rfcs:1; /* bit 14 */ + u32 rmca:1; /* bit 13 */ + u32 rbca:1; /* bit 12 */ + u32 rxcf:1; /* bit 11 */ + u32 rxpf:1; /* bit 10 */ + u32 rxuo:1; /* bit 9 */ + u32 raln:1; /* bit 8 */ + u32 rflr:1; /* bit 7 */ + u32 rcde:1; /* bit 6 */ + u32 rcse:1; /* bit 5 */ + u32 rund:1; /* bit 4 */ + u32 rovr:1; /* bit 3 */ + u32 rfrg:1; /* bit 2 */ + u32 rjbr:1; /* bit 1 */ + u32 rdrp:1; /* bit 0 */ +#else + u32 rdrp:1; /* bit 0 */ + u32 rjbr:1; /* bit 1 */ + u32 rfrg:1; /* bit 2 */ + u32 rovr:1; /* bit 3 */ + u32 rund:1; /* bit 4 */ + u32 rcse:1; /* bit 5 */ + u32 rcde:1; /* bit 6 */ + u32 rflr:1; /* bit 7 */ + u32 raln:1; /* bit 8 */ + u32 rxuo:1; /* bit 9 */ + u32 rxpf:1; /* bit 10 */ + u32 rxcf:1; /* bit 11 */ + u32 rbca:1; /* bit 12 */ + u32 rmca:1; /* bit 13 */ + u32 rfcs:1; /* bit 14 */ + u32 rpkt:1; /* bit 15 */ + u32 rbyt:1; /* bit 16 */ + u32 unused:8; /* bits 17-24 */ + u32 trmgv:1; /* bit 25 */ + u32 trmax:1; /* bit 26 */ + u32 tr1k:1; /* bit 27 */ + u32 tr511:1; /* bit 28 */ + u32 tr255:1; /* bit 29 */ + u32 tr127:1; /* bit 30 */ + u32 tr64:1; /* bit 31 */ #endif } bits; } MAC_STAT_REG_1_t, *PMAC_STAT_REG_1_t; @@ -2060,49 +1824,49 @@ typedef union _MAC_STAT_REG_2_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 unused:12; // bit 20-31 - u32 tjbr:1; // bit 19 - u32 tfcs:1; // bit 18 - u32 txcf:1; // bit 17 - u32 tovr:1; // bit 16 - u32 tund:1; // bit 15 - u32 tfrg:1; // bit 14 - u32 tbyt:1; // bit 13 - u32 tpkt:1; // bit 12 - u32 tmca:1; // bit 11 - u32 tbca:1; // bit 10 - u32 txpf:1; // bit 9 - u32 tdfr:1; // bit 8 - u32 tedf:1; // bit 7 - u32 tscl:1; // bit 6 - u32 tmcl:1; // bit 5 - u32 tlcl:1; // bit 4 - u32 txcl:1; // bit 3 - u32 tncl:1; // bit 2 - u32 tpfh:1; // bit 1 - u32 tdrp:1; // bit 0 -#else - u32 tdrp:1; // bit 0 - u32 tpfh:1; // bit 1 - u32 tncl:1; // bit 2 - u32 txcl:1; // bit 3 - u32 tlcl:1; // bit 4 - u32 tmcl:1; // bit 5 - u32 tscl:1; // bit 6 - u32 tedf:1; // bit 7 - u32 tdfr:1; // bit 8 - u32 txpf:1; // bit 9 - u32 tbca:1; // bit 10 - u32 tmca:1; // bit 11 - u32 tpkt:1; // bit 12 - u32 tbyt:1; // bit 13 - u32 tfrg:1; // bit 14 - u32 tund:1; // bit 15 - u32 tovr:1; // bit 16 - u32 txcf:1; // bit 17 - u32 tfcs:1; // bit 18 - u32 tjbr:1; // bit 19 - u32 unused:12; // bit 20-31 + u32 unused:12; /* bit 20-31 */ + u32 tjbr:1; /* bit 19 */ + u32 tfcs:1; /* bit 18 */ + u32 txcf:1; /* bit 17 */ + u32 tovr:1; /* bit 16 */ + u32 tund:1; /* bit 15 */ + u32 tfrg:1; /* bit 14 */ + u32 tbyt:1; /* bit 13 */ + u32 tpkt:1; /* bit 12 */ + u32 tmca:1; /* bit 11 */ + u32 tbca:1; /* bit 10 */ + u32 txpf:1; /* bit 9 */ + u32 tdfr:1; /* bit 8 */ + u32 tedf:1; /* bit 7 */ + u32 tscl:1; /* bit 6 */ + u32 tmcl:1; /* bit 5 */ + u32 tlcl:1; /* bit 4 */ + u32 txcl:1; /* bit 3 */ + u32 tncl:1; /* bit 2 */ + u32 tpfh:1; /* bit 1 */ + u32 tdrp:1; /* bit 0 */ +#else + u32 tdrp:1; /* bit 0 */ + u32 tpfh:1; /* bit 1 */ + u32 tncl:1; /* bit 2 */ + u32 txcl:1; /* bit 3 */ + u32 tlcl:1; /* bit 4 */ + u32 tmcl:1; /* bit 5 */ + u32 tscl:1; /* bit 6 */ + u32 tedf:1; /* bit 7 */ + u32 tdfr:1; /* bit 8 */ + u32 txpf:1; /* bit 9 */ + u32 tbca:1; /* bit 10 */ + u32 tmca:1; /* bit 11 */ + u32 tpkt:1; /* bit 12 */ + u32 tbyt:1; /* bit 13 */ + u32 tfrg:1; /* bit 14 */ + u32 tund:1; /* bit 15 */ + u32 tovr:1; /* bit 16 */ + u32 txcf:1; /* bit 17 */ + u32 tfcs:1; /* bit 18 */ + u32 tjbr:1; /* bit 19 */ + u32 unused:12; /* bit 20-31 */ #endif } bits; } MAC_STAT_REG_2_t, *PMAC_STAT_REG_2_t; @@ -2110,152 +1874,152 @@ typedef union _MAC_STAT_REG_2_t { /* * MAC STATS Module of JAGCore Address Mapping */ -typedef struct _MAC_STAT_t { // Location: - u32 pad[32]; // 0x6000 - 607C +typedef struct _MAC_STAT_t { /* Location: */ + u32 pad[32]; /* 0x6000 - 607C */ - // Tx/Rx 0-64 Byte Frame Counter - u32 TR64; // 0x6080 + /* Tx/Rx 0-64 Byte Frame Counter */ + u32 TR64; /* 0x6080 */ - // Tx/Rx 65-127 Byte Frame Counter - u32 TR127; // 0x6084 + /* Tx/Rx 65-127 Byte Frame Counter */ + u32 TR127; /* 0x6084 */ - // Tx/Rx 128-255 Byte Frame Counter - u32 TR255; // 0x6088 + /* Tx/Rx 128-255 Byte Frame Counter */ + u32 TR255; /* 0x6088 */ - // Tx/Rx 256-511 Byte Frame Counter - u32 TR511; // 0x608C + /* Tx/Rx 256-511 Byte Frame Counter */ + u32 TR511; /* 0x608C */ - // Tx/Rx 512-1023 Byte Frame Counter - u32 TR1K; // 0x6090 + /* Tx/Rx 512-1023 Byte Frame Counter */ + u32 TR1K; /* 0x6090 */ - // Tx/Rx 1024-1518 Byte Frame Counter - u32 TRMax; // 0x6094 + /* Tx/Rx 1024-1518 Byte Frame Counter */ + u32 TRMax; /* 0x6094 */ - // Tx/Rx 1519-1522 Byte Good VLAN Frame Count - u32 TRMgv; // 0x6098 + /* Tx/Rx 1519-1522 Byte Good VLAN Frame Count */ + u32 TRMgv; /* 0x6098 */ - // Rx Byte Counter - u32 RByt; // 0x609C + /* Rx Byte Counter */ + u32 RByt; /* 0x609C */ - // Rx Packet Counter - u32 RPkt; // 0x60A0 + /* Rx Packet Counter */ + u32 RPkt; /* 0x60A0 */ - // Rx FCS Error Counter - u32 RFcs; // 0x60A4 + /* Rx FCS Error Counter */ + u32 RFcs; /* 0x60A4 */ - // Rx Multicast Packet Counter - u32 RMca; // 0x60A8 + /* Rx Multicast Packet Counter */ + u32 RMca; /* 0x60A8 */ - // Rx Broadcast Packet Counter - u32 RBca; // 0x60AC + /* Rx Broadcast Packet Counter */ + u32 RBca; /* 0x60AC */ - // Rx Control Frame Packet Counter - u32 RxCf; // 0x60B0 + /* Rx Control Frame Packet Counter */ + u32 RxCf; /* 0x60B0 */ - // Rx Pause Frame Packet Counter - u32 RxPf; // 0x60B4 + /* Rx Pause Frame Packet Counter */ + u32 RxPf; /* 0x60B4 */ - // Rx Unknown OP Code Counter - u32 RxUo; // 0x60B8 + /* Rx Unknown OP Code Counter */ + u32 RxUo; /* 0x60B8 */ - // Rx Alignment Error Counter - u32 RAln; // 0x60BC + /* Rx Alignment Error Counter */ + u32 RAln; /* 0x60BC */ - // Rx Frame Length Error Counter - u32 RFlr; // 0x60C0 + /* Rx Frame Length Error Counter */ + u32 RFlr; /* 0x60C0 */ - // Rx Code Error Counter - u32 RCde; // 0x60C4 + /* Rx Code Error Counter */ + u32 RCde; /* 0x60C4 */ - // Rx Carrier Sense Error Counter - u32 RCse; // 0x60C8 + /* Rx Carrier Sense Error Counter */ + u32 RCse; /* 0x60C8 */ - // Rx Undersize Packet Counter - u32 RUnd; // 0x60CC + /* Rx Undersize Packet Counter */ + u32 RUnd; /* 0x60CC */ - // Rx Oversize Packet Counter - u32 ROvr; // 0x60D0 + /* Rx Oversize Packet Counter */ + u32 ROvr; /* 0x60D0 */ - // Rx Fragment Counter - u32 RFrg; // 0x60D4 + /* Rx Fragment Counter */ + u32 RFrg; /* 0x60D4 */ - // Rx Jabber Counter - u32 RJbr; // 0x60D8 + /* Rx Jabber Counter */ + u32 RJbr; /* 0x60D8 */ - // Rx Drop - u32 RDrp; // 0x60DC + /* Rx Drop */ + u32 RDrp; /* 0x60DC */ - // Tx Byte Counter - u32 TByt; // 0x60E0 + /* Tx Byte Counter */ + u32 TByt; /* 0x60E0 */ - // Tx Packet Counter - u32 TPkt; // 0x60E4 + /* Tx Packet Counter */ + u32 TPkt; /* 0x60E4 */ - // Tx Multicast Packet Counter - u32 TMca; // 0x60E8 + /* Tx Multicast Packet Counter */ + u32 TMca; /* 0x60E8 */ - // Tx Broadcast Packet Counter - u32 TBca; // 0x60EC + /* Tx Broadcast Packet Counter */ + u32 TBca; /* 0x60EC */ - // Tx Pause Control Frame Counter - u32 TxPf; // 0x60F0 + /* Tx Pause Control Frame Counter */ + u32 TxPf; /* 0x60F0 */ - // Tx Deferral Packet Counter - u32 TDfr; // 0x60F4 + /* Tx Deferral Packet Counter */ + u32 TDfr; /* 0x60F4 */ - // Tx Excessive Deferral Packet Counter - u32 TEdf; // 0x60F8 + /* Tx Excessive Deferral Packet Counter */ + u32 TEdf; /* 0x60F8 */ - // Tx Single Collision Packet Counter - u32 TScl; // 0x60FC + /* Tx Single Collision Packet Counter */ + u32 TScl; /* 0x60FC */ - // Tx Multiple Collision Packet Counter - u32 TMcl; // 0x6100 + /* Tx Multiple Collision Packet Counter */ + u32 TMcl; /* 0x6100 */ - // Tx Late Collision Packet Counter - u32 TLcl; // 0x6104 + /* Tx Late Collision Packet Counter */ + u32 TLcl; /* 0x6104 */ - // Tx Excessive Collision Packet Counter - u32 TXcl; // 0x6108 + /* Tx Excessive Collision Packet Counter */ + u32 TXcl; /* 0x6108 */ - // Tx Total Collision Packet Counter - u32 TNcl; // 0x610C + /* Tx Total Collision Packet Counter */ + u32 TNcl; /* 0x610C */ - // Tx Pause Frame Honored Counter - u32 TPfh; // 0x6110 + /* Tx Pause Frame Honored Counter */ + u32 TPfh; /* 0x6110 */ - // Tx Drop Frame Counter - u32 TDrp; // 0x6114 + /* Tx Drop Frame Counter */ + u32 TDrp; /* 0x6114 */ - // Tx Jabber Frame Counter - u32 TJbr; // 0x6118 + /* Tx Jabber Frame Counter */ + u32 TJbr; /* 0x6118 */ - // Tx FCS Error Counter - u32 TFcs; // 0x611C + /* Tx FCS Error Counter */ + u32 TFcs; /* 0x611C */ - // Tx Control Frame Counter - u32 TxCf; // 0x6120 + /* Tx Control Frame Counter */ + u32 TxCf; /* 0x6120 */ - // Tx Oversize Frame Counter - u32 TOvr; // 0x6124 + /* Tx Oversize Frame Counter */ + u32 TOvr; /* 0x6124 */ - // Tx Undersize Frame Counter - u32 TUnd; // 0x6128 + /* Tx Undersize Frame Counter */ + u32 TUnd; /* 0x6128 */ - // Tx Fragments Frame Counter - u32 TFrg; // 0x612C + /* Tx Fragments Frame Counter */ + u32 TFrg; /* 0x612C */ - // Carry Register One Register - MAC_STAT_REG_1_t Carry1; // 0x6130 + /* Carry Register One Register */ + MAC_STAT_REG_1_t Carry1; /* 0x6130 */ - // Carry Register Two Register - MAC_STAT_REG_2_t Carry2; // 0x6134 + /* Carry Register Two Register */ + MAC_STAT_REG_2_t Carry2; /* 0x6134 */ - // Carry Register One Mask Register - MAC_STAT_REG_1_t Carry1M; // 0x6138 + /* Carry Register One Mask Register */ + MAC_STAT_REG_1_t Carry1M; /* 0x6138 */ - // Carry Register Two Mask Register - MAC_STAT_REG_2_t Carry2M; // 0x613C + /* Carry Register Two Mask Register */ + MAC_STAT_REG_2_t Carry2M; /* 0x613C */ } MAC_STAT_t, *PMAC_STAT_t; /* END OF MAC STAT REGISTER ADDRESS MAP */ @@ -2264,60 +2028,26 @@ typedef struct _MAC_STAT_t { // Location: /* START OF MMC REGISTER ADDRESS MAP */ /* - * structure for Main Memory Controller Control reg in mmc address map. + * Main Memory Controller Control reg in mmc address map. * located at address 0x7000 */ -typedef union _MMC_CTRL_t { - u32 value; - struct { -#ifdef _BIT_FIELDS_HTOL - u32 reserved:25; // bits 7-31 - u32 force_ce:1; // bit 6 - u32 rxdma_disable:1; // bit 5 - u32 txdma_disable:1; // bit 4 - u32 txmac_disable:1; // bit 3 - u32 rxmac_disable:1; // bit 2 - u32 arb_disable:1; // bit 1 - u32 mmc_enable:1; // bit 0 -#else - u32 mmc_enable:1; // bit 0 - u32 arb_disable:1; // bit 1 - u32 rxmac_disable:1; // bit 2 - u32 txmac_disable:1; // bit 3 - u32 txdma_disable:1; // bit 4 - u32 rxdma_disable:1; // bit 5 - u32 force_ce:1; // bit 6 - u32 reserved:25; // bits 7-31 -#endif - } bits; -} MMC_CTRL_t, *PMMC_CTRL_t; + +#define ET_MMC_ENABLE 1 +#define ET_MMC_ARB_DISABLE 2 +#define ET_MMC_RXMAC_DISABLE 4 +#define ET_MMC_TXMAC_DISABLE 8 +#define ET_MMC_TXDMA_DISABLE 16 +#define ET_MMC_RXDMA_DISABLE 32 +#define ET_MMC_FORCE_CE 64 /* - * structure for Main Memory Controller Host Memory Access Address reg in mmc - * address map. Located at address 0x7004 + * Main Memory Controller Host Memory Access Address reg in mmc + * address map. Located at address 0x7004. Top 16 bits hold the address bits */ -typedef union _MMC_SRAM_ACCESS_t { - u32 value; - struct { -#ifdef _BIT_FIELDS_HTOL - u32 byte_enable:16; // bits 16-31 - u32 reserved2:2; // bits 14-15 - u32 req_addr:10; // bits 4-13 - u32 reserved1:1; // bit 3 - u32 is_ctrl_word:1; // bit 2 - u32 wr_access:1; // bit 1 - u32 req_access:1; // bit 0 -#else - u32 req_access:1; // bit 0 - u32 wr_access:1; // bit 1 - u32 is_ctrl_word:1; // bit 2 - u32 reserved1:1; // bit 3 - u32 req_addr:10; // bits 4-13 - u32 reserved2:2; // bits 14-15 - u32 byte_enable:16; // bits 16-31 -#endif - } bits; -} MMC_SRAM_ACCESS_t, *PMMC_SRAM_ACCESS_t; + +#define ET_SRAM_REQ_ACCESS 1 +#define ET_SRAM_WR_ACCESS 2 +#define ET_SRAM_IS_CTRL 4 /* * structure for Main Memory Controller Host Memory Access Data reg in mmc @@ -2328,13 +2058,13 @@ typedef union _MMC_SRAM_ACCESS_t { /* * Memory Control Module of JAGCore Address Mapping */ -typedef struct _MMC_t { // Location: - MMC_CTRL_t mmc_ctrl; // 0x7000 - MMC_SRAM_ACCESS_t sram_access; // 0x7004 - u32 sram_word1; // 0x7008 - u32 sram_word2; // 0x700C - u32 sram_word3; // 0x7010 - u32 sram_word4; // 0x7014 +typedef struct _MMC_t { /* Location: */ + u32 mmc_ctrl; /* 0x7000 */ + u32 sram_access; /* 0x7004 */ + u32 sram_word1; /* 0x7008 */ + u32 sram_word2; /* 0x700C */ + u32 sram_word3; /* 0x7010 */ + u32 sram_word4; /* 0x7014 */ } MMC_t, *PMMC_t; /* END OF MMC REGISTER ADDRESS MAP */ @@ -2361,30 +2091,30 @@ typedef struct _EXP_ROM_t { */ typedef struct _ADDRESS_MAP_t { GLOBAL_t global; - // unused section of global address map + /* unused section of global address map */ u8 unused_global[4096 - sizeof(GLOBAL_t)]; TXDMA_t txdma; - // unused section of txdma address map + /* unused section of txdma address map */ u8 unused_txdma[4096 - sizeof(TXDMA_t)]; RXDMA_t rxdma; - // unused section of rxdma address map + /* unused section of rxdma address map */ u8 unused_rxdma[4096 - sizeof(RXDMA_t)]; TXMAC_t txmac; - // unused section of txmac address map + /* unused section of txmac address map */ u8 unused_txmac[4096 - sizeof(TXMAC_t)]; RXMAC_t rxmac; - // unused section of rxmac address map + /* unused section of rxmac address map */ u8 unused_rxmac[4096 - sizeof(RXMAC_t)]; MAC_t mac; - // unused section of mac address map + /* unused section of mac address map */ u8 unused_mac[4096 - sizeof(MAC_t)]; MAC_STAT_t macStat; - // unused section of mac stat address map + /* unused section of mac stat address map */ u8 unused_mac_stat[4096 - sizeof(MAC_STAT_t)]; MMC_t mmc; - // unused section of mmc address map + /* unused section of mmc address map */ u8 unused_mmc[4096 - sizeof(MMC_t)]; - // unused section of address map + /* unused section of address map */ u8 unused_[1015808]; /* Take this out until it is not empty */ @@ -2392,8 +2122,8 @@ typedef struct _ADDRESS_MAP_t { EXP_ROM_t exp_rom; #endif - u8 unused_exp_rom[4096]; // MGS-size TBD - u8 unused__[524288]; // unused section of address map + u8 unused_exp_rom[4096]; /* MGS-size TBD */ + u8 unused__[524288]; /* unused section of address map */ } ADDRESS_MAP_t, *PADDRESS_MAP_t; #endif /* _ET1310_ADDRESS_MAP_H_ */ diff --git a/drivers/staging/et131x/et1310_eeprom.c b/drivers/staging/et131x/et1310_eeprom.c index c2b194e..c853a2c 100644 --- a/drivers/staging/et131x/et1310_eeprom.c +++ b/drivers/staging/et131x/et1310_eeprom.c @@ -2,7 +2,7 @@ * Agere Systems Inc. * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * http://www.agere.com * @@ -19,7 +19,7 @@ * software indicates your acceptance of these terms and conditions. If you do * not agree with these terms and conditions, do not use the software. * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * * Redistribution and use in source or binary forms, with or without @@ -40,7 +40,7 @@ * * Disclaimer * - * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN @@ -56,7 +56,6 @@ */ #include "et131x_version.h" -#include "et131x_debug.h" #include "et131x_defs.h" #include <linux/pci.h> @@ -74,9 +73,9 @@ #include <linux/interrupt.h> #include <linux/in.h> #include <linux/delay.h> -#include <asm/io.h> +#include <linux/bitops.h> +#include <linux/io.h> #include <asm/system.h> -#include <asm/bitops.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> @@ -137,34 +136,30 @@ * Define macros that allow individual register values to be extracted from a * DWORD1 register grouping */ -#define EXTRACT_DATA_REGISTER(x) (uint8_t)(x & 0xFF) -#define EXTRACT_STATUS_REGISTER(x) (uint8_t)((x >> 16) & 0xFF) -#define EXTRACT_CONTROL_REG(x) (uint8_t)((x >> 8) & 0xFF) +#define EXTRACT_DATA_REGISTER(x) (u8)(x & 0xFF) +#define EXTRACT_STATUS_REGISTER(x) (u8)((x >> 16) & 0xFF) +#define EXTRACT_CONTROL_REG(x) (u8)((x >> 8) & 0xFF) /** * EepromWriteByte - Write a byte to the ET1310's EEPROM - * @pAdapter: pointer to our private adapter structure - * @unAddress: the address to write - * @bData: the value to write - * @unEepronId: the ID of the EEPROM - * @unAddressingMode: how the EEPROM is to be accessed + * @etdev: pointer to our private adapter structure + * @addr: the address to write + * @data: the value to write * * Returns SUCCESS or FAILURE */ -int32_t EepromWriteByte(struct et131x_adapter *pAdapter, uint32_t unAddress, - uint8_t bData, uint32_t unEepromId, - uint32_t unAddressingMode) +int EepromWriteByte(struct et131x_adapter *etdev, u32 addr, u8 data) { - struct pci_dev *pdev = pAdapter->pdev; - int32_t nIndex; - int32_t nRetries; - int32_t nError = false; - int32_t nI2CWriteActive = 0; - int32_t nWriteSuccessful = 0; - uint8_t bControl; - uint8_t bStatus = 0; - uint32_t unDword1 = 0; - uint32_t unData = 0; + struct pci_dev *pdev = etdev->pdev; + int index; + int retries; + int err = 0; + int i2c_wack = 0; + int writeok = 0; + u8 control; + u8 status = 0; + u32 dword1 = 0; + u32 val = 0; /* * The following excerpt is from "Serial EEPROM HW Design @@ -215,93 +210,84 @@ int32_t EepromWriteByte(struct et131x_adapter *pAdapter, uint32_t unAddress, */ /* Step 1: */ - for (nIndex = 0; nIndex < MAX_NUM_REGISTER_POLLS; nIndex++) { + for (index = 0; index < MAX_NUM_REGISTER_POLLS; index++) { /* Read registers grouped in DWORD1 */ if (pci_read_config_dword(pdev, LBCIF_DWORD1_GROUP_OFFSET, - &unDword1)) { - nError = 1; + &dword1)) { + err = 1; break; } - bStatus = EXTRACT_STATUS_REGISTER(unDword1); + status = EXTRACT_STATUS_REGISTER(dword1); - if (bStatus & LBCIF_STATUS_PHY_QUEUE_AVAIL && - bStatus & LBCIF_STATUS_I2C_IDLE) { - /* bits 1:0 are equal to 1 */ + if (status & LBCIF_STATUS_PHY_QUEUE_AVAIL && + status & LBCIF_STATUS_I2C_IDLE) + /* bits 1:0 are equal to 1 */ break; - } } - if (nError || (nIndex >= MAX_NUM_REGISTER_POLLS)) { + if (err || (index >= MAX_NUM_REGISTER_POLLS)) return FAILURE; - } /* Step 2: */ - bControl = 0; - bControl |= LBCIF_CONTROL_LBCIF_ENABLE | LBCIF_CONTROL_I2C_WRITE; - - if (unAddressingMode == DUAL_BYTE) { - bControl |= LBCIF_CONTROL_TWO_BYTE_ADDR; - } + control = 0; + control |= LBCIF_CONTROL_LBCIF_ENABLE | LBCIF_CONTROL_I2C_WRITE; if (pci_write_config_byte(pdev, LBCIF_CONTROL_REGISTER_OFFSET, - bControl)) { + control)) { return FAILURE; } - nI2CWriteActive = 1; + i2c_wack = 1; /* Prepare EEPROM address for Step 3 */ - unAddress |= (unAddressingMode == DUAL_BYTE) ? - (unEepromId << 16) : (unEepromId << 8); - for (nRetries = 0; nRetries < MAX_NUM_WRITE_RETRIES; nRetries++) { + for (retries = 0; retries < MAX_NUM_WRITE_RETRIES; retries++) { /* Step 3:*/ if (pci_write_config_dword(pdev, LBCIF_ADDRESS_REGISTER_OFFSET, - unAddress)) { + addr)) { break; } /* Step 4: */ if (pci_write_config_byte(pdev, LBCIF_DATA_REGISTER_OFFSET, - bData)) { + data)) { break; } /* Step 5: */ - for (nIndex = 0; nIndex < MAX_NUM_REGISTER_POLLS; nIndex++) { + for (index = 0; index < MAX_NUM_REGISTER_POLLS; index++) { /* Read registers grouped in DWORD1 */ if (pci_read_config_dword(pdev, LBCIF_DWORD1_GROUP_OFFSET, - &unDword1)) { - nError = 1; + &dword1)) { + err = 1; break; } - bStatus = EXTRACT_STATUS_REGISTER(unDword1); + status = EXTRACT_STATUS_REGISTER(dword1); - if (bStatus & LBCIF_STATUS_PHY_QUEUE_AVAIL && - bStatus & LBCIF_STATUS_I2C_IDLE) { - /* I2C write complete */ + if (status & LBCIF_STATUS_PHY_QUEUE_AVAIL && + status & LBCIF_STATUS_I2C_IDLE) { + /* I2C write complete */ break; } } - if (nError || (nIndex >= MAX_NUM_REGISTER_POLLS)) { + if (err || (index >= MAX_NUM_REGISTER_POLLS)) break; - } /* * Step 6: Don't break here if we are revision 1, this is * so we do a blind write for load bug. - */ - if (bStatus & LBCIF_STATUS_GENERAL_ERROR - && pAdapter->RevisionID == 0) { + */ + if (status & LBCIF_STATUS_GENERAL_ERROR + && etdev->pdev->revision == 0) { break; } /* Step 7 */ - if (bStatus & LBCIF_STATUS_ACK_ERROR) { + if (status & LBCIF_STATUS_ACK_ERROR) { /* * This could be due to an actual hardware failure * or the EEPROM may still be in its internal write @@ -312,19 +298,19 @@ int32_t EepromWriteByte(struct et131x_adapter *pAdapter, uint32_t unAddress, continue; } - nWriteSuccessful = 1; + writeok = 1; break; } /* Step 8: */ udelay(10); - nIndex = 0; - while (nI2CWriteActive) { - bControl &= ~LBCIF_CONTROL_I2C_WRITE; + index = 0; + while (i2c_wack) { + control &= ~LBCIF_CONTROL_I2C_WRITE; if (pci_write_config_byte(pdev, LBCIF_CONTROL_REGISTER_OFFSET, - bControl)) { - nWriteSuccessful = 0; + control)) { + writeok = 0; } /* Do read until internal ACK_ERROR goes away meaning write @@ -333,45 +319,42 @@ int32_t EepromWriteByte(struct et131x_adapter *pAdapter, uint32_t unAddress, do { pci_write_config_dword(pdev, LBCIF_ADDRESS_REGISTER_OFFSET, - unAddress); + addr); do { pci_read_config_dword(pdev, - LBCIF_DATA_REGISTER_OFFSET, &unData); - } while ((unData & 0x00010000) == 0); - } while (unData & 0x00040000); + LBCIF_DATA_REGISTER_OFFSET, &val); + } while ((val & 0x00010000) == 0); + } while (val & 0x00040000); - bControl = EXTRACT_CONTROL_REG(unData); + control = EXTRACT_CONTROL_REG(val); - if (bControl != 0xC0 || nIndex == 10000) { + if (control != 0xC0 || index == 10000) break; - } - nIndex++; + index++; } - return nWriteSuccessful ? SUCCESS : FAILURE; + return writeok ? SUCCESS : FAILURE; } /** * EepromReadByte - Read a byte from the ET1310's EEPROM - * @pAdapter: pointer to our private adapter structure - * @unAddress: the address from which to read - * @pbData: a pointer to a byte in which to store the value of the read - * @unEepronId: the ID of the EEPROM - * @unAddressingMode: how the EEPROM is to be accessed + * @etdev: pointer to our private adapter structure + * @addr: the address from which to read + * @pdata: a pointer to a byte in which to store the value of the read + * @eeprom_id: the ID of the EEPROM + * @addrmode: how the EEPROM is to be accessed * * Returns SUCCESS or FAILURE */ -int32_t EepromReadByte(struct et131x_adapter *pAdapter, uint32_t unAddress, - uint8_t *pbData, uint32_t unEepromId, - uint32_t unAddressingMode) +int EepromReadByte(struct et131x_adapter *etdev, u32 addr, u8 *pdata) { - struct pci_dev *pdev = pAdapter->pdev; - int32_t nIndex; - int32_t nError = 0; - uint8_t bControl; - uint8_t bStatus = 0; - uint32_t unDword1 = 0; + struct pci_dev *pdev = etdev->pdev; + int index; + int err = 0; + u8 control; + u8 status = 0; + u32 dword1 = 0; /* * The following excerpt is from "Serial EEPROM HW Design @@ -408,73 +391,65 @@ int32_t EepromReadByte(struct et131x_adapter *pAdapter, uint32_t unAddress, */ /* Step 1: */ - for (nIndex = 0; nIndex < MAX_NUM_REGISTER_POLLS; nIndex++) { + for (index = 0; index < MAX_NUM_REGISTER_POLLS; index++) { /* Read registers grouped in DWORD1 */ if (pci_read_config_dword(pdev, LBCIF_DWORD1_GROUP_OFFSET, - &unDword1)) { - nError = 1; + &dword1)) { + err = 1; break; } - bStatus = EXTRACT_STATUS_REGISTER(unDword1); + status = EXTRACT_STATUS_REGISTER(dword1); - if (bStatus & LBCIF_STATUS_PHY_QUEUE_AVAIL && - bStatus & LBCIF_STATUS_I2C_IDLE) { + if (status & LBCIF_STATUS_PHY_QUEUE_AVAIL && + status & LBCIF_STATUS_I2C_IDLE) { /* bits 1:0 are equal to 1 */ break; } } - if (nError || (nIndex >= MAX_NUM_REGISTER_POLLS)) { + if (err || (index >= MAX_NUM_REGISTER_POLLS)) return FAILURE; - } /* Step 2: */ - bControl = 0; - bControl |= LBCIF_CONTROL_LBCIF_ENABLE; - - if (unAddressingMode == DUAL_BYTE) { - bControl |= LBCIF_CONTROL_TWO_BYTE_ADDR; - } + control = 0; + control |= LBCIF_CONTROL_LBCIF_ENABLE; if (pci_write_config_byte(pdev, LBCIF_CONTROL_REGISTER_OFFSET, - bControl)) { + control)) { return FAILURE; } /* Step 3: */ - unAddress |= (unAddressingMode == DUAL_BYTE) ? - (unEepromId << 16) : (unEepromId << 8); if (pci_write_config_dword(pdev, LBCIF_ADDRESS_REGISTER_OFFSET, - unAddress)) { + addr)) { return FAILURE; } /* Step 4: */ - for (nIndex = 0; nIndex < MAX_NUM_REGISTER_POLLS; nIndex++) { + for (index = 0; index < MAX_NUM_REGISTER_POLLS; index++) { /* Read registers grouped in DWORD1 */ if (pci_read_config_dword(pdev, LBCIF_DWORD1_GROUP_OFFSET, - &unDword1)) { - nError = 1; + &dword1)) { + err = 1; break; } - bStatus = EXTRACT_STATUS_REGISTER(unDword1); + status = EXTRACT_STATUS_REGISTER(dword1); - if (bStatus & LBCIF_STATUS_PHY_QUEUE_AVAIL - && bStatus & LBCIF_STATUS_I2C_IDLE) { + if (status & LBCIF_STATUS_PHY_QUEUE_AVAIL + && status & LBCIF_STATUS_I2C_IDLE) { /* I2C read complete */ break; } } - if (nError || (nIndex >= MAX_NUM_REGISTER_POLLS)) { + if (err || (index >= MAX_NUM_REGISTER_POLLS)) return FAILURE; - } /* Step 6: */ - *pbData = EXTRACT_DATA_REGISTER(unDword1); + *pdata = EXTRACT_DATA_REGISTER(dword1); - return (bStatus & LBCIF_STATUS_ACK_ERROR) ? FAILURE : SUCCESS; + return (status & LBCIF_STATUS_ACK_ERROR) ? FAILURE : SUCCESS; } diff --git a/drivers/staging/et131x/et1310_eeprom.h b/drivers/staging/et131x/et1310_eeprom.h index 9b6f8ad..d8ac9a0 100644 --- a/drivers/staging/et131x/et1310_eeprom.h +++ b/drivers/staging/et131x/et1310_eeprom.h @@ -2,7 +2,7 @@ * Agere Systems Inc. * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * http://www.agere.com * @@ -20,7 +20,7 @@ * software indicates your acceptance of these terms and conditions. If you do * not agree with these terms and conditions, do not use the software. * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * * Redistribution and use in source or binary forms, with or without @@ -41,7 +41,7 @@ * * Disclaimer * - * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN @@ -66,24 +66,12 @@ #define FAILURE 1 #endif -#ifndef READ -#define READ 0 -#define WRITE 1 -#endif - -#ifndef SINGLE_BYTE -#define SINGLE_BYTE 0 -#define DUAL_BYTE 1 -#endif - /* Forward declaration of the private adapter structure */ struct et131x_adapter; int32_t EepromWriteByte(struct et131x_adapter *adapter, u32 unAddress, - u8 bData, u32 unEepromId, - u32 unAddressingMode); + u8 bData); int32_t EepromReadByte(struct et131x_adapter *adapter, u32 unAddress, - u8 *pbData, u32 unEepromId, - u32 unAddressingMode); + u8 *pbData); #endif /* _ET1310_EEPROM_H_ */ diff --git a/drivers/staging/et131x/et1310_jagcore.c b/drivers/staging/et131x/et1310_jagcore.c deleted file mode 100644 index 993b30e..0000000 --- a/drivers/staging/et131x/et1310_jagcore.c +++ /dev/null @@ -1,220 +0,0 @@ -/* - * Agere Systems Inc. - * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs - * - * Copyright © 2005 Agere Systems Inc. - * All rights reserved. - * http://www.agere.com - * - *------------------------------------------------------------------------------ - * - * et1310_jagcore.c - All code pertaining to the ET1301/ET131x's JAGcore - * - *------------------------------------------------------------------------------ - * - * SOFTWARE LICENSE - * - * This software is provided subject to the following terms and conditions, - * which you should read carefully before using the software. Using this - * software indicates your acceptance of these terms and conditions. If you do - * not agree with these terms and conditions, do not use the software. - * - * Copyright © 2005 Agere Systems Inc. - * All rights reserved. - * - * Redistribution and use in source or binary forms, with or without - * modifications, are permitted provided that the following conditions are met: - * - * . Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following Disclaimer as comments in the code as - * well as in the documentation and/or other materials provided with the - * distribution. - * - * . Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following Disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * . Neither the name of Agere Systems Inc. nor the names of the contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * Disclaimer - * - * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY - * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN - * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH - * DAMAGE. - * - */ - -#include "et131x_version.h" -#include "et131x_debug.h" -#include "et131x_defs.h" - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> - -#include <linux/sched.h> -#include <linux/ptrace.h> -#include <linux/slab.h> -#include <linux/ctype.h> -#include <linux/string.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/in.h> -#include <linux/delay.h> -#include <asm/io.h> -#include <asm/system.h> -#include <asm/bitops.h> - -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/if_arp.h> -#include <linux/ioport.h> - -#include "et1310_phy.h" -#include "et1310_pm.h" -#include "et1310_jagcore.h" - -#include "et131x_adapter.h" -#include "et131x_initpci.h" - -/* Data for debugging facilities */ -#ifdef CONFIG_ET131X_DEBUG -extern dbg_info_t *et131x_dbginfo; -#endif /* CONFIG_ET131X_DEBUG */ - -/** - * ConfigGlobalRegs - Used to configure the global registers on the JAGCore - * @pAdpater: pointer to our adapter structure - */ -void ConfigGlobalRegs(struct et131x_adapter *pAdapter) -{ - struct _GLOBAL_t __iomem *pGbl = &pAdapter->CSRAddress->global; - - DBG_ENTER(et131x_dbginfo); - - if (pAdapter->RegistryPhyLoopbk == false) { - if (pAdapter->RegistryJumboPacket < 2048) { - /* Tx / RxDMA and Tx/Rx MAC interfaces have a 1k word - * block of RAM that the driver can split between Tx - * and Rx as it desires. Our default is to split it - * 50/50: - */ - writel(0, &pGbl->rxq_start_addr.value); - writel(pAdapter->RegistryRxMemEnd, - &pGbl->rxq_end_addr.value); - writel(pAdapter->RegistryRxMemEnd + 1, - &pGbl->txq_start_addr.value); - writel(INTERNAL_MEM_SIZE - 1, - &pGbl->txq_end_addr.value); - } else if (pAdapter->RegistryJumboPacket < 8192) { - /* For jumbo packets > 2k but < 8k, split 50-50. */ - writel(0, &pGbl->rxq_start_addr.value); - writel(INTERNAL_MEM_RX_OFFSET, - &pGbl->rxq_end_addr.value); - writel(INTERNAL_MEM_RX_OFFSET + 1, - &pGbl->txq_start_addr.value); - writel(INTERNAL_MEM_SIZE - 1, - &pGbl->txq_end_addr.value); - } else { - /* 9216 is the only packet size greater than 8k that - * is available. The Tx buffer has to be big enough - * for one whole packet on the Tx side. We'll make - * the Tx 9408, and give the rest to Rx - */ - writel(0x0000, &pGbl->rxq_start_addr.value); - writel(0x01b3, &pGbl->rxq_end_addr.value); - writel(0x01b4, &pGbl->txq_start_addr.value); - writel(INTERNAL_MEM_SIZE - 1, - &pGbl->txq_end_addr.value); - } - - /* Initialize the loopback register. Disable all loopbacks. */ - writel(0, &pGbl->loopback.value); - } else { - /* For PHY Line loopback, the memory is configured as if Tx - * and Rx both have all the memory. This is because the - * RxMAC will write data into the space, and the TxMAC will - * read it out. - */ - writel(0, &pGbl->rxq_start_addr.value); - writel(INTERNAL_MEM_SIZE - 1, &pGbl->rxq_end_addr.value); - writel(0, &pGbl->txq_start_addr.value); - writel(INTERNAL_MEM_SIZE - 1, &pGbl->txq_end_addr.value); - - /* Initialize the loopback register (MAC loopback). */ - writel(1, &pGbl->loopback.value); - } - - /* MSI Register */ - writel(0, &pGbl->msi_config.value); - - /* By default, disable the watchdog timer. It will be enabled when - * a packet is queued. - */ - writel(0, &pGbl->watchdog_timer); - - DBG_LEAVE(et131x_dbginfo); -} - -/** - * ConfigMMCRegs - Used to configure the main memory registers in the JAGCore - * @pAdapter: pointer to our adapter structure - */ -void ConfigMMCRegs(struct et131x_adapter *pAdapter) -{ - MMC_CTRL_t mmc_ctrl = { 0 }; - - DBG_ENTER(et131x_dbginfo); - - /* All we need to do is initialize the Memory Control Register */ - mmc_ctrl.bits.force_ce = 0x0; - mmc_ctrl.bits.rxdma_disable = 0x0; - mmc_ctrl.bits.txdma_disable = 0x0; - mmc_ctrl.bits.txmac_disable = 0x0; - mmc_ctrl.bits.rxmac_disable = 0x0; - mmc_ctrl.bits.arb_disable = 0x0; - mmc_ctrl.bits.mmc_enable = 0x1; - - writel(mmc_ctrl.value, &pAdapter->CSRAddress->mmc.mmc_ctrl.value); - - DBG_LEAVE(et131x_dbginfo); -} - -void et131x_enable_interrupts(struct et131x_adapter *adapter) -{ - uint32_t MaskValue; - - /* Enable all global interrupts */ - if ((adapter->FlowControl == TxOnly) || (adapter->FlowControl == Both)) { - MaskValue = INT_MASK_ENABLE; - } else { - MaskValue = INT_MASK_ENABLE_NO_FLOW; - } - - if (adapter->DriverNoPhyAccess) { - MaskValue |= 0x10000; - } - - adapter->CachedMaskValue.value = MaskValue; - writel(MaskValue, &adapter->CSRAddress->global.int_mask.value); -} - -void et131x_disable_interrupts(struct et131x_adapter * adapter) -{ - /* Disable all global interrupts */ - adapter->CachedMaskValue.value = INT_MASK_DISABLE; - writel(INT_MASK_DISABLE, &adapter->CSRAddress->global.int_mask.value); -} diff --git a/drivers/staging/et131x/et1310_jagcore.h b/drivers/staging/et131x/et1310_jagcore.h index 9fc8293..0807a01 100644 --- a/drivers/staging/et131x/et1310_jagcore.h +++ b/drivers/staging/et131x/et1310_jagcore.h @@ -2,7 +2,7 @@ * Agere Systems Inc. * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * http://www.agere.com * @@ -20,7 +20,7 @@ * software indicates your acceptance of these terms and conditions. If you do * not agree with these terms and conditions, do not use the software. * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * * Redistribution and use in source or binary forms, with or without @@ -41,7 +41,7 @@ * * Disclaimer * - * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN @@ -62,10 +62,8 @@ #include "et1310_address_map.h" -#define INTERNAL_MEM_SIZE 0x400 //1024 of internal memory -#define INTERNAL_MEM_RX_OFFSET 0x1FF //50% Tx, 50% Rx - -#define REGS_MAX_ARRAY 4096 +#define INTERNAL_MEM_SIZE 0x400 /* 1024 of internal memory */ +#define INTERNAL_MEM_RX_OFFSET 0x1FF /* 50% Tx, 50% Rx */ /* * For interrupts, normal running is: @@ -78,29 +76,13 @@ */ #define INT_MASK_DISABLE 0xffffffff -// NOTE: Masking out MAC_STAT Interrupt for now... -//#define INT_MASK_ENABLE 0xfff6bf17 -//#define INT_MASK_ENABLE_NO_FLOW 0xfff6bfd7 +/* NOTE: Masking out MAC_STAT Interrupt for now... + * #define INT_MASK_ENABLE 0xfff6bf17 + * #define INT_MASK_ENABLE_NO_FLOW 0xfff6bfd7 + */ #define INT_MASK_ENABLE 0xfffebf17 #define INT_MASK_ENABLE_NO_FLOW 0xfffebfd7 -/* DATA STRUCTURES FOR DIRECT REGISTER ACCESS */ - -typedef struct { - u8 bReadWrite; - u32 nRegCount; - u32 nData[REGS_MAX_ARRAY]; - u32 nOffsets[REGS_MAX_ARRAY]; -} JAGCORE_ACCESS_REGS, *PJAGCORE_ACCESS_REGS; - -typedef struct { - u8 bReadWrite; - u32 nDataWidth; - u32 nRegCount; - u32 nOffsets[REGS_MAX_ARRAY]; - u32 nData[REGS_MAX_ARRAY]; -} PCI_CFG_SPACE_REGS, *PPCI_CFG_SPACE_REGS; - /* Forward declaration of the private adapter structure */ struct et131x_adapter; diff --git a/drivers/staging/et131x/et1310_mac.c b/drivers/staging/et131x/et1310_mac.c index 1924968..f81e1cb 100644 --- a/drivers/staging/et131x/et1310_mac.c +++ b/drivers/staging/et131x/et1310_mac.c @@ -2,7 +2,7 @@ * Agere Systems Inc. * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * http://www.agere.com * @@ -19,7 +19,7 @@ * software indicates your acceptance of these terms and conditions. If you do * not agree with these terms and conditions, do not use the software. * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * * Redistribution and use in source or binary forms, with or without @@ -40,7 +40,7 @@ * * Disclaimer * - * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN @@ -56,7 +56,6 @@ */ #include "et131x_version.h" -#include "et131x_debug.h" #include "et131x_defs.h" #include <linux/init.h> @@ -73,9 +72,10 @@ #include <linux/interrupt.h> #include <linux/in.h> #include <linux/delay.h> -#include <asm/io.h> +#include <linux/io.h> +#include <linux/bitops.h> +#include <linux/pci.h> #include <asm/system.h> -#include <asm/bitops.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> @@ -92,36 +92,29 @@ #include "et131x_adapter.h" #include "et131x_initpci.h" -/* Data for debugging facilities */ -#ifdef CONFIG_ET131X_DEBUG -extern dbg_info_t *et131x_dbginfo; -#endif /* CONFIG_ET131X_DEBUG */ - /** * ConfigMacRegs1 - Initialize the first part of MAC regs * @pAdpater: pointer to our adapter structure */ -void ConfigMACRegs1(struct et131x_adapter *pAdapter) +void ConfigMACRegs1(struct et131x_adapter *etdev) { - struct _MAC_t __iomem *pMac = &pAdapter->CSRAddress->mac; + struct _MAC_t __iomem *pMac = &etdev->regs->mac; MAC_STATION_ADDR1_t station1; MAC_STATION_ADDR2_t station2; MAC_IPG_t ipg; MAC_HFDP_t hfdp; MII_MGMT_CFG_t mii_mgmt_cfg; - DBG_ENTER(et131x_dbginfo); - /* First we need to reset everything. Write to MAC configuration * register 1 to perform reset. */ writel(0xC00F0000, &pMac->cfg1.value); /* Next lets configure the MAC Inter-packet gap register */ - ipg.bits.non_B2B_ipg_1 = 0x38; // 58d - ipg.bits.non_B2B_ipg_2 = 0x58; // 88d - ipg.bits.min_ifg_enforce = 0x50; // 80d - ipg.bits.B2B_ipg = 0x60; // 96d + ipg.bits.non_B2B_ipg_1 = 0x38; /* 58d */ + ipg.bits.non_B2B_ipg_2 = 0x58; /* 88d */ + ipg.bits.min_ifg_enforce = 0x50; /* 80d */ + ipg.bits.B2B_ipg = 0x60; /* 96d */ writel(ipg.value, &pMac->ipg.value); /* Next lets configure the MAC Half Duplex register */ @@ -131,13 +124,13 @@ void ConfigMACRegs1(struct et131x_adapter *pAdapter) hfdp.bits.no_backoff = 0x0; hfdp.bits.excess_defer = 0x1; hfdp.bits.rexmit_max = 0xF; - hfdp.bits.coll_window = 0x37; // 55d + hfdp.bits.coll_window = 0x37; /* 55d */ writel(hfdp.value, &pMac->hfdp.value); /* Next lets configure the MAC Interface Control register */ writel(0, &pMac->if_ctrl.value); - /* Let's move on to setting up the mii managment configuration */ + /* Let's move on to setting up the mii management configuration */ mii_mgmt_cfg.bits.reset_mii_mgmt = 0; mii_mgmt_cfg.bits.scan_auto_incremt = 0; mii_mgmt_cfg.bits.preamble_suppress = 0; @@ -151,12 +144,12 @@ void ConfigMACRegs1(struct et131x_adapter *pAdapter) * station address is used for generating and checking pause control * packets. */ - station2.bits.Octet1 = pAdapter->CurrentAddress[0]; - station2.bits.Octet2 = pAdapter->CurrentAddress[1]; - station1.bits.Octet3 = pAdapter->CurrentAddress[2]; - station1.bits.Octet4 = pAdapter->CurrentAddress[3]; - station1.bits.Octet5 = pAdapter->CurrentAddress[4]; - station1.bits.Octet6 = pAdapter->CurrentAddress[5]; + station2.bits.Octet1 = etdev->CurrentAddress[0]; + station2.bits.Octet2 = etdev->CurrentAddress[1]; + station1.bits.Octet3 = etdev->CurrentAddress[2]; + station1.bits.Octet4 = etdev->CurrentAddress[3]; + station1.bits.Octet5 = etdev->CurrentAddress[4]; + station1.bits.Octet6 = etdev->CurrentAddress[5]; writel(station1.value, &pMac->station_addr_1.value); writel(station2.value, &pMac->station_addr_2.value); @@ -167,35 +160,31 @@ void ConfigMACRegs1(struct et131x_adapter *pAdapter) * Packets larger than (RegistryJumboPacket) that do not contain a * VLAN ID will be dropped by the Rx function. */ - writel(pAdapter->RegistryJumboPacket + 4, &pMac->max_fm_len.value); + writel(etdev->RegistryJumboPacket + 4, &pMac->max_fm_len.value); /* clear out MAC config reset */ writel(0, &pMac->cfg1.value); - - DBG_LEAVE(et131x_dbginfo); } /** * ConfigMacRegs2 - Initialize the second part of MAC regs * @pAdpater: pointer to our adapter structure */ -void ConfigMACRegs2(struct et131x_adapter *pAdapter) +void ConfigMACRegs2(struct et131x_adapter *etdev) { int32_t delay = 0; - struct _MAC_t __iomem *pMac = &pAdapter->CSRAddress->mac; + struct _MAC_t __iomem *pMac = &etdev->regs->mac; MAC_CFG1_t cfg1; MAC_CFG2_t cfg2; MAC_IF_CTRL_t ifctrl; TXMAC_CTL_t ctl; - DBG_ENTER(et131x_dbginfo); - - ctl.value = readl(&pAdapter->CSRAddress->txmac.ctl.value); + ctl.value = readl(&etdev->regs->txmac.ctl.value); cfg1.value = readl(&pMac->cfg1.value); cfg2.value = readl(&pMac->cfg2.value); ifctrl.value = readl(&pMac->if_ctrl.value); - if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) { + if (etdev->linkspeed == TRUEPHY_SPEED_1000MBPS) { cfg2.bits.if_mode = 0x2; ifctrl.bits.phy_mode = 0x0; } else { @@ -210,8 +199,8 @@ void ConfigMACRegs2(struct et131x_adapter *pAdapter) /* Set up flow control */ cfg1.bits.tx_flow = 0x1; - if ((pAdapter->FlowControl == RxOnly) || - (pAdapter->FlowControl == Both)) { + if ((etdev->FlowControl == RxOnly) || + (etdev->FlowControl == Both)) { cfg1.bits.rx_flow = 0x1; } else { cfg1.bits.rx_flow = 0x0; @@ -232,7 +221,7 @@ void ConfigMACRegs2(struct et131x_adapter *pAdapter) */ cfg2.bits.len_check = 0x1; - if (pAdapter->RegistryPhyLoopbk == false) { + if (etdev->RegistryPhyLoopbk == false) { cfg2.bits.pad_crc = 0x1; cfg2.bits.crc_enable = 0x1; } else { @@ -241,8 +230,8 @@ void ConfigMACRegs2(struct et131x_adapter *pAdapter) } /* 1 - full duplex, 0 - half-duplex */ - cfg2.bits.full_duplex = pAdapter->uiDuplexMode; - ifctrl.bits.ghd_mode = !pAdapter->uiDuplexMode; + cfg2.bits.full_duplex = etdev->duplex_mode; + ifctrl.bits.ghd_mode = !etdev->duplex_mode; writel(ifctrl.value, &pMac->if_ctrl.value); writel(cfg2.value, &pMac->cfg2.value); @@ -251,48 +240,34 @@ void ConfigMACRegs2(struct et131x_adapter *pAdapter) udelay(10); delay++; cfg1.value = readl(&pMac->cfg1.value); - } while ((!cfg1.bits.syncd_rx_en || - !cfg1.bits.syncd_tx_en) && - delay < 100); + } while ((!cfg1.bits.syncd_rx_en || !cfg1.bits.syncd_tx_en) && + delay < 100); if (delay == 100) { - DBG_ERROR(et131x_dbginfo, - "Syncd bits did not respond correctly cfg1 word 0x%08x\n", - cfg1.value); + dev_warn(&etdev->pdev->dev, + "Syncd bits did not respond correctly cfg1 word 0x%08x\n", + cfg1.value); } - DBG_TRACE(et131x_dbginfo, - "Speed %d, Dup %d, CFG1 0x%08x, CFG2 0x%08x, if_ctrl 0x%08x\n", - pAdapter->uiLinkSpeed, pAdapter->uiDuplexMode, - readl(&pMac->cfg1.value), readl(&pMac->cfg2.value), - readl(&pMac->if_ctrl.value)); - /* Enable TXMAC */ ctl.bits.txmac_en = 0x1; ctl.bits.fc_disable = 0x1; - writel(ctl.value, &pAdapter->CSRAddress->txmac.ctl.value); + writel(ctl.value, &etdev->regs->txmac.ctl.value); /* Ready to start the RXDMA/TXDMA engine */ - if (!MP_TEST_FLAG(pAdapter, fMP_ADAPTER_LOWER_POWER)) { - et131x_rx_dma_enable(pAdapter); - et131x_tx_dma_enable(pAdapter); - } else { - DBG_WARNING(et131x_dbginfo, - "Didn't enable Rx/Tx due to low-power mode\n"); + if (etdev->Flags & fMP_ADAPTER_LOWER_POWER) { + et131x_rx_dma_enable(etdev); + et131x_tx_dma_enable(etdev); } - - DBG_LEAVE(et131x_dbginfo); } -void ConfigRxMacRegs(struct et131x_adapter *pAdapter) +void ConfigRxMacRegs(struct et131x_adapter *etdev) { - struct _RXMAC_t __iomem *pRxMac = &pAdapter->CSRAddress->rxmac; + struct _RXMAC_t __iomem *pRxMac = &etdev->regs->rxmac; RXMAC_WOL_SA_LO_t sa_lo; RXMAC_WOL_SA_HI_t sa_hi; RXMAC_PF_CTRL_t pf_ctrl = { 0 }; - DBG_ENTER(et131x_dbginfo); - /* Disable the MAC while it is being configured (also disable WOL) */ writel(0x8, &pRxMac->ctrl.value); @@ -331,22 +306,22 @@ void ConfigRxMacRegs(struct et131x_adapter *pAdapter) writel(0, &pRxMac->mask4_word3); /* Lets setup the WOL Source Address */ - sa_lo.bits.sa3 = pAdapter->CurrentAddress[2]; - sa_lo.bits.sa4 = pAdapter->CurrentAddress[3]; - sa_lo.bits.sa5 = pAdapter->CurrentAddress[4]; - sa_lo.bits.sa6 = pAdapter->CurrentAddress[5]; + sa_lo.bits.sa3 = etdev->CurrentAddress[2]; + sa_lo.bits.sa4 = etdev->CurrentAddress[3]; + sa_lo.bits.sa5 = etdev->CurrentAddress[4]; + sa_lo.bits.sa6 = etdev->CurrentAddress[5]; writel(sa_lo.value, &pRxMac->sa_lo.value); - sa_hi.bits.sa1 = pAdapter->CurrentAddress[0]; - sa_hi.bits.sa2 = pAdapter->CurrentAddress[1]; + sa_hi.bits.sa1 = etdev->CurrentAddress[0]; + sa_hi.bits.sa2 = etdev->CurrentAddress[1]; writel(sa_hi.value, &pRxMac->sa_hi.value); /* Disable all Packet Filtering */ writel(0, &pRxMac->pf_ctrl.value); /* Let's initialize the Unicast Packet filtering address */ - if (pAdapter->PacketFilter & ET131X_PACKET_TYPE_DIRECTED) { - SetupDeviceForUnicast(pAdapter); + if (etdev->PacketFilter & ET131X_PACKET_TYPE_DIRECTED) { + SetupDeviceForUnicast(etdev); pf_ctrl.bits.filter_uni_en = 1; } else { writel(0, &pRxMac->uni_pf_addr1.value); @@ -355,18 +330,18 @@ void ConfigRxMacRegs(struct et131x_adapter *pAdapter) } /* Let's initialize the Multicast hash */ - if (pAdapter->PacketFilter & ET131X_PACKET_TYPE_ALL_MULTICAST) { + if (etdev->PacketFilter & ET131X_PACKET_TYPE_ALL_MULTICAST) { pf_ctrl.bits.filter_multi_en = 0; } else { pf_ctrl.bits.filter_multi_en = 1; - SetupDeviceForMulticast(pAdapter); + SetupDeviceForMulticast(etdev); } /* Runt packet filtering. Didn't work in version A silicon. */ pf_ctrl.bits.min_pkt_size = NIC_MIN_PACKET_SIZE + 4; pf_ctrl.bits.filter_frag_en = 1; - if (pAdapter->RegistryJumboPacket > 8192) { + if (etdev->RegistryJumboPacket > 8192) { RXMAC_MCIF_CTRL_MAX_SEG_t mcif_ctrl_max_seg; /* In order to transmit jumbo packets greater than 8k, the @@ -409,11 +384,10 @@ void ConfigRxMacRegs(struct et131x_adapter *pAdapter) * bit 16: Receive frame truncated. * bit 17: Drop packet enable */ - if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_100MBPS) { + if (etdev->linkspeed == TRUEPHY_SPEED_100MBPS) writel(0x30038, &pRxMac->mif_ctrl.value); - } else { + else writel(0x30030, &pRxMac->mif_ctrl.value); - } /* Finally we initialize RxMac to be enabled & WOL disabled. Packet * filter is always enabled since it is where the runt packets are @@ -423,38 +397,30 @@ void ConfigRxMacRegs(struct et131x_adapter *pAdapter) */ writel(pf_ctrl.value, &pRxMac->pf_ctrl.value); writel(0x9, &pRxMac->ctrl.value); - - DBG_LEAVE(et131x_dbginfo); } -void ConfigTxMacRegs(struct et131x_adapter *pAdapter) +void ConfigTxMacRegs(struct et131x_adapter *etdev) { - struct _TXMAC_t __iomem *pTxMac = &pAdapter->CSRAddress->txmac; + struct _TXMAC_t __iomem *pTxMac = &etdev->regs->txmac; TXMAC_CF_PARAM_t Local; - DBG_ENTER(et131x_dbginfo); - /* We need to update the Control Frame Parameters * cfpt - control frame pause timer set to 64 (0x40) * cfep - control frame extended pause timer set to 0x0 */ - if (pAdapter->FlowControl == None) { + if (etdev->FlowControl == None) { writel(0, &pTxMac->cf_param.value); } else { Local.bits.cfpt = 0x40; Local.bits.cfep = 0x0; writel(Local.value, &pTxMac->cf_param.value); } - - DBG_LEAVE(et131x_dbginfo); } -void ConfigMacStatRegs(struct et131x_adapter *pAdapter) +void ConfigMacStatRegs(struct et131x_adapter *etdev) { struct _MAC_STAT_t __iomem *pDevMacStat = - &pAdapter->CSRAddress->macStat; - - DBG_ENTER(et131x_dbginfo); + &etdev->regs->macStat; /* Next we need to initialize all the MAC_STAT registers to zero on * the device. @@ -536,56 +502,52 @@ void ConfigMacStatRegs(struct et131x_adapter *pAdapter) writel(Carry2M.value, &pDevMacStat->Carry2M.value); } - - DBG_LEAVE(et131x_dbginfo); } -void ConfigFlowControl(struct et131x_adapter * pAdapter) +void ConfigFlowControl(struct et131x_adapter *etdev) { - if (pAdapter->uiDuplexMode == 0) { - pAdapter->FlowControl = None; + if (etdev->duplex_mode == 0) { + etdev->FlowControl = None; } else { char RemotePause, RemoteAsyncPause; - ET1310_PhyAccessMiBit(pAdapter, + ET1310_PhyAccessMiBit(etdev, TRUEPHY_BIT_READ, 5, 10, &RemotePause); - ET1310_PhyAccessMiBit(pAdapter, + ET1310_PhyAccessMiBit(etdev, TRUEPHY_BIT_READ, 5, 11, &RemoteAsyncPause); if ((RemotePause == TRUEPHY_BIT_SET) && (RemoteAsyncPause == TRUEPHY_BIT_SET)) { - pAdapter->FlowControl = pAdapter->RegistryFlowControl; + etdev->FlowControl = etdev->RegistryFlowControl; } else if ((RemotePause == TRUEPHY_BIT_SET) && (RemoteAsyncPause == TRUEPHY_BIT_CLEAR)) { - if (pAdapter->RegistryFlowControl == Both) { - pAdapter->FlowControl = Both; - } else { - pAdapter->FlowControl = None; - } + if (etdev->RegistryFlowControl == Both) + etdev->FlowControl = Both; + else + etdev->FlowControl = None; } else if ((RemotePause == TRUEPHY_BIT_CLEAR) && (RemoteAsyncPause == TRUEPHY_BIT_CLEAR)) { - pAdapter->FlowControl = None; + etdev->FlowControl = None; } else {/* if (RemotePause == TRUEPHY_CLEAR_BIT && RemoteAsyncPause == TRUEPHY_SET_BIT) */ - if (pAdapter->RegistryFlowControl == Both) { - pAdapter->FlowControl = RxOnly; - } else { - pAdapter->FlowControl = None; - } + if (etdev->RegistryFlowControl == Both) + etdev->FlowControl = RxOnly; + else + etdev->FlowControl = None; } } } /** * UpdateMacStatHostCounters - Update the local copy of the statistics - * @pAdapter: pointer to the adapter structure + * @etdev: pointer to the adapter structure */ -void UpdateMacStatHostCounters(struct et131x_adapter *pAdapter) +void UpdateMacStatHostCounters(struct et131x_adapter *etdev) { - struct _ce_stats_t *stats = &pAdapter->Stats; + struct _ce_stats_t *stats = &etdev->Stats; struct _MAC_STAT_t __iomem *pDevMacStat = - &pAdapter->CSRAddress->macStat; + &etdev->regs->macStat; stats->collisions += readl(&pDevMacStat->TNcl); stats->first_collision += readl(&pDevMacStat->TScl); @@ -607,27 +569,25 @@ void UpdateMacStatHostCounters(struct et131x_adapter *pAdapter) /** * HandleMacStatInterrupt - * @pAdapter: pointer to the adapter structure + * @etdev: pointer to the adapter structure * * One of the MACSTAT counters has wrapped. Update the local copy of * the statistics held in the adapter structure, checking the "wrap" * bit for each counter. */ -void HandleMacStatInterrupt(struct et131x_adapter *pAdapter) +void HandleMacStatInterrupt(struct et131x_adapter *etdev) { MAC_STAT_REG_1_t Carry1; MAC_STAT_REG_2_t Carry2; - DBG_ENTER(et131x_dbginfo); - /* Read the interrupt bits from the register(s). These are Clear On * Write. */ - Carry1.value = readl(&pAdapter->CSRAddress->macStat.Carry1.value); - Carry2.value = readl(&pAdapter->CSRAddress->macStat.Carry2.value); + Carry1.value = readl(&etdev->regs->macStat.Carry1.value); + Carry2.value = readl(&etdev->regs->macStat.Carry2.value); - writel(Carry1.value, &pAdapter->CSRAddress->macStat.Carry1.value); - writel(Carry2.value, &pAdapter->CSRAddress->macStat.Carry2.value); + writel(Carry1.value, &etdev->regs->macStat.Carry1.value); + writel(Carry2.value, &etdev->regs->macStat.Carry2.value); /* We need to do update the host copy of all the MAC_STAT counters. * For each counter, check it's overflow bit. If the overflow bit is @@ -635,88 +595,56 @@ void HandleMacStatInterrupt(struct et131x_adapter *pAdapter) * revolution of the counter. This routine is called when the counter * block indicates that one of the counters has wrapped. */ - if (Carry1.bits.rfcs) { - pAdapter->Stats.code_violations += COUNTER_WRAP_16_BIT; - } - if (Carry1.bits.raln) { - pAdapter->Stats.alignment_err += COUNTER_WRAP_12_BIT; - } - if (Carry1.bits.rflr) { - pAdapter->Stats.length_err += COUNTER_WRAP_16_BIT; - } - if (Carry1.bits.rfrg) { - pAdapter->Stats.other_errors += COUNTER_WRAP_16_BIT; - } - if (Carry1.bits.rcde) { - pAdapter->Stats.crc_err += COUNTER_WRAP_16_BIT; - } - if (Carry1.bits.rovr) { - pAdapter->Stats.rx_ov_flow += COUNTER_WRAP_16_BIT; - } - if (Carry1.bits.rdrp) { - pAdapter->Stats.norcvbuf += COUNTER_WRAP_16_BIT; - } - if (Carry2.bits.tovr) { - pAdapter->Stats.max_pkt_error += COUNTER_WRAP_12_BIT; - } - if (Carry2.bits.tund) { - pAdapter->Stats.tx_uflo += COUNTER_WRAP_12_BIT; - } - if (Carry2.bits.tscl) { - pAdapter->Stats.first_collision += COUNTER_WRAP_12_BIT; - } - if (Carry2.bits.tdfr) { - pAdapter->Stats.tx_deferred += COUNTER_WRAP_12_BIT; - } - if (Carry2.bits.tmcl) { - pAdapter->Stats.excessive_collisions += COUNTER_WRAP_12_BIT; - } - if (Carry2.bits.tlcl) { - pAdapter->Stats.late_collisions += COUNTER_WRAP_12_BIT; - } - if (Carry2.bits.tncl) { - pAdapter->Stats.collisions += COUNTER_WRAP_12_BIT; - } - - DBG_LEAVE(et131x_dbginfo); + if (Carry1.bits.rfcs) + etdev->Stats.code_violations += COUNTER_WRAP_16_BIT; + if (Carry1.bits.raln) + etdev->Stats.alignment_err += COUNTER_WRAP_12_BIT; + if (Carry1.bits.rflr) + etdev->Stats.length_err += COUNTER_WRAP_16_BIT; + if (Carry1.bits.rfrg) + etdev->Stats.other_errors += COUNTER_WRAP_16_BIT; + if (Carry1.bits.rcde) + etdev->Stats.crc_err += COUNTER_WRAP_16_BIT; + if (Carry1.bits.rovr) + etdev->Stats.rx_ov_flow += COUNTER_WRAP_16_BIT; + if (Carry1.bits.rdrp) + etdev->Stats.norcvbuf += COUNTER_WRAP_16_BIT; + if (Carry2.bits.tovr) + etdev->Stats.max_pkt_error += COUNTER_WRAP_12_BIT; + if (Carry2.bits.tund) + etdev->Stats.tx_uflo += COUNTER_WRAP_12_BIT; + if (Carry2.bits.tscl) + etdev->Stats.first_collision += COUNTER_WRAP_12_BIT; + if (Carry2.bits.tdfr) + etdev->Stats.tx_deferred += COUNTER_WRAP_12_BIT; + if (Carry2.bits.tmcl) + etdev->Stats.excessive_collisions += COUNTER_WRAP_12_BIT; + if (Carry2.bits.tlcl) + etdev->Stats.late_collisions += COUNTER_WRAP_12_BIT; + if (Carry2.bits.tncl) + etdev->Stats.collisions += COUNTER_WRAP_12_BIT; } -void SetupDeviceForMulticast(struct et131x_adapter *pAdapter) +void SetupDeviceForMulticast(struct et131x_adapter *etdev) { - struct _RXMAC_t __iomem *rxmac = &pAdapter->CSRAddress->rxmac; + struct _RXMAC_t __iomem *rxmac = &etdev->regs->rxmac; uint32_t nIndex; uint32_t result; uint32_t hash1 = 0; uint32_t hash2 = 0; uint32_t hash3 = 0; uint32_t hash4 = 0; - PM_CSR_t pm_csr; - - DBG_ENTER(et131x_dbginfo); + u32 pm_csr; /* If ET131X_PACKET_TYPE_MULTICAST is specified, then we provision * the multi-cast LIST. If it is NOT specified, (and "ALL" is not * specified) then we should pass NO multi-cast addresses to the * driver. */ - if (pAdapter->PacketFilter & ET131X_PACKET_TYPE_MULTICAST) { - DBG_VERBOSE(et131x_dbginfo, - "MULTICAST flag is set, MCCount: %d\n", - pAdapter->MCAddressCount); - + if (etdev->PacketFilter & ET131X_PACKET_TYPE_MULTICAST) { /* Loop through our multicast array and set up the device */ - for (nIndex = 0; nIndex < pAdapter->MCAddressCount; nIndex++) { - DBG_VERBOSE(et131x_dbginfo, - "MCList[%d]: %02x:%02x:%02x:%02x:%02x:%02x\n", - nIndex, - pAdapter->MCList[nIndex][0], - pAdapter->MCList[nIndex][1], - pAdapter->MCList[nIndex][2], - pAdapter->MCList[nIndex][3], - pAdapter->MCList[nIndex][4], - pAdapter->MCList[nIndex][5]); - - result = ether_crc(6, pAdapter->MCList[nIndex]); + for (nIndex = 0; nIndex < etdev->MCAddressCount; nIndex++) { + result = ether_crc(6, etdev->MCList[nIndex]); result = (result & 0x3F800000) >> 23; @@ -736,26 +664,22 @@ void SetupDeviceForMulticast(struct et131x_adapter *pAdapter) } /* Write out the new hash to the device */ - pm_csr.value = readl(&pAdapter->CSRAddress->global.pm_csr.value); - if (pm_csr.bits.pm_phy_sw_coma == 0) { + pm_csr = readl(&etdev->regs->global.pm_csr); + if ((pm_csr & ET_PM_PHY_SW_COMA) == 0) { writel(hash1, &rxmac->multi_hash1); writel(hash2, &rxmac->multi_hash2); writel(hash3, &rxmac->multi_hash3); writel(hash4, &rxmac->multi_hash4); } - - DBG_LEAVE(et131x_dbginfo); } -void SetupDeviceForUnicast(struct et131x_adapter *pAdapter) +void SetupDeviceForUnicast(struct et131x_adapter *etdev) { - struct _RXMAC_t __iomem *rxmac = &pAdapter->CSRAddress->rxmac; + struct _RXMAC_t __iomem *rxmac = &etdev->regs->rxmac; RXMAC_UNI_PF_ADDR1_t uni_pf1; RXMAC_UNI_PF_ADDR2_t uni_pf2; RXMAC_UNI_PF_ADDR3_t uni_pf3; - PM_CSR_t pm_csr; - - DBG_ENTER(et131x_dbginfo); + u32 pm_csr; /* Set up unicast packet filter reg 3 to be the first two octets of * the MAC address for both address @@ -766,27 +690,25 @@ void SetupDeviceForUnicast(struct et131x_adapter *pAdapter) * Set up unicast packet filter reg 3 to be the octets 2 - 5 of the * MAC address for first address */ - uni_pf3.bits.addr1_1 = pAdapter->CurrentAddress[0]; - uni_pf3.bits.addr1_2 = pAdapter->CurrentAddress[1]; - uni_pf3.bits.addr2_1 = pAdapter->CurrentAddress[0]; - uni_pf3.bits.addr2_2 = pAdapter->CurrentAddress[1]; - - uni_pf2.bits.addr2_3 = pAdapter->CurrentAddress[2]; - uni_pf2.bits.addr2_4 = pAdapter->CurrentAddress[3]; - uni_pf2.bits.addr2_5 = pAdapter->CurrentAddress[4]; - uni_pf2.bits.addr2_6 = pAdapter->CurrentAddress[5]; - - uni_pf1.bits.addr1_3 = pAdapter->CurrentAddress[2]; - uni_pf1.bits.addr1_4 = pAdapter->CurrentAddress[3]; - uni_pf1.bits.addr1_5 = pAdapter->CurrentAddress[4]; - uni_pf1.bits.addr1_6 = pAdapter->CurrentAddress[5]; - - pm_csr.value = readl(&pAdapter->CSRAddress->global.pm_csr.value); - if (pm_csr.bits.pm_phy_sw_coma == 0) { + uni_pf3.bits.addr1_1 = etdev->CurrentAddress[0]; + uni_pf3.bits.addr1_2 = etdev->CurrentAddress[1]; + uni_pf3.bits.addr2_1 = etdev->CurrentAddress[0]; + uni_pf3.bits.addr2_2 = etdev->CurrentAddress[1]; + + uni_pf2.bits.addr2_3 = etdev->CurrentAddress[2]; + uni_pf2.bits.addr2_4 = etdev->CurrentAddress[3]; + uni_pf2.bits.addr2_5 = etdev->CurrentAddress[4]; + uni_pf2.bits.addr2_6 = etdev->CurrentAddress[5]; + + uni_pf1.bits.addr1_3 = etdev->CurrentAddress[2]; + uni_pf1.bits.addr1_4 = etdev->CurrentAddress[3]; + uni_pf1.bits.addr1_5 = etdev->CurrentAddress[4]; + uni_pf1.bits.addr1_6 = etdev->CurrentAddress[5]; + + pm_csr = readl(&etdev->regs->global.pm_csr); + if ((pm_csr & ET_PM_PHY_SW_COMA) == 0) { writel(uni_pf1.value, &rxmac->uni_pf_addr1.value); writel(uni_pf2.value, &rxmac->uni_pf_addr2.value); writel(uni_pf3.value, &rxmac->uni_pf_addr3.value); } - - DBG_LEAVE(et131x_dbginfo); } diff --git a/drivers/staging/et131x/et1310_mac.h b/drivers/staging/et131x/et1310_mac.h index bd26cd3..2c38595 100644 --- a/drivers/staging/et131x/et1310_mac.h +++ b/drivers/staging/et131x/et1310_mac.h @@ -2,7 +2,7 @@ * Agere Systems Inc. * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * http://www.agere.com * @@ -20,7 +20,7 @@ * software indicates your acceptance of these terms and conditions. If you do * not agree with these terms and conditions, do not use the software. * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * * Redistribution and use in source or binary forms, with or without @@ -41,7 +41,7 @@ * * Disclaimer * - * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN @@ -73,7 +73,7 @@ #define COUNTER_MASK_16_BIT (COUNTER_WRAP_16_BIT - 1) #define COUNTER_MASK_12_BIT (COUNTER_WRAP_12_BIT - 1) -#define UPDATE_COUNTER(HostCnt,DevCnt) \ +#define UPDATE_COUNTER(HostCnt, DevCnt) \ HostCnt = HostCnt + DevCnt; /* Forward declaration of the private adapter structure */ diff --git a/drivers/staging/et131x/et1310_phy.c b/drivers/staging/et131x/et1310_phy.c index 9dd6dfd..dd199bd 100644 --- a/drivers/staging/et131x/et1310_phy.c +++ b/drivers/staging/et131x/et1310_phy.c @@ -2,7 +2,7 @@ * Agere Systems Inc. * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs * - * Copyright © 2005 Agere Systems Inc. + * Copyright * 2005 Agere Systems Inc. * All rights reserved. * http://www.agere.com * @@ -19,7 +19,7 @@ * software indicates your acceptance of these terms and conditions. If you do * not agree with these terms and conditions, do not use the software. * - * Copyright © 2005 Agere Systems Inc. + * Copyright * 2005 Agere Systems Inc. * All rights reserved. * * Redistribution and use in source or binary forms, with or without @@ -40,7 +40,7 @@ * * Disclaimer * - * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN @@ -56,7 +56,6 @@ */ #include "et131x_version.h" -#include "et131x_debug.h" #include "et131x_defs.h" #include <linux/pci.h> @@ -74,9 +73,9 @@ #include <linux/interrupt.h> #include <linux/in.h> #include <linux/delay.h> -#include <asm/io.h> +#include <linux/io.h> +#include <linux/bitops.h> #include <asm/system.h> -#include <asm/bitops.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> @@ -98,11 +97,6 @@ #include "et1310_rx.h" #include "et1310_mac.h" -/* Data for debugging facilities */ -#ifdef CONFIG_ET131X_DEBUG -extern dbg_info_t *et131x_dbginfo; -#endif /* CONFIG_ET131X_DEBUG */ - /* Prototypes for functions with local scope */ static int et131x_xcvr_init(struct et131x_adapter *adapter); @@ -118,7 +112,7 @@ static int et131x_xcvr_init(struct et131x_adapter *adapter); int PhyMiRead(struct et131x_adapter *adapter, uint8_t xcvrAddr, uint8_t xcvrReg, uint16_t *value) { - struct _MAC_t __iomem *mac = &adapter->CSRAddress->mac; + struct _MAC_t __iomem *mac = &adapter->regs->mac; int status = 0; uint32_t delay; MII_MGMT_ADDR_t miiAddr; @@ -157,9 +151,9 @@ int PhyMiRead(struct et131x_adapter *adapter, uint8_t xcvrAddr, /* If we hit the max delay, we could not read the register */ if (delay >= 50) { - DBG_WARNING(et131x_dbginfo, + dev_warn(&adapter->pdev->dev, "xcvrReg 0x%08x could not be read\n", xcvrReg); - DBG_WARNING(et131x_dbginfo, "status is 0x%08x\n", + dev_warn(&adapter->pdev->dev, "status is 0x%08x\n", miiIndicator.value); status = -EIO; @@ -179,10 +173,6 @@ int PhyMiRead(struct et131x_adapter *adapter, uint8_t xcvrAddr, /* Stop the read operation */ writel(0, &mac->mii_mgmt_cmd.value); - DBG_VERBOSE(et131x_dbginfo, " xcvr_addr = 0x%02x, " - "xcvr_reg = 0x%02x, " - "value = 0x%04x.\n", xcvrAddr, xcvrReg, *value); - /* set the registers we touched back to the state at which we entered * this function */ @@ -202,7 +192,7 @@ int PhyMiRead(struct et131x_adapter *adapter, uint8_t xcvrAddr, */ int MiWrite(struct et131x_adapter *adapter, uint8_t xcvrReg, uint16_t value) { - struct _MAC_t __iomem *mac = &adapter->CSRAddress->mac; + struct _MAC_t __iomem *mac = &adapter->regs->mac; int status = 0; uint8_t xcvrAddr = adapter->Stats.xcvr_addr; uint32_t delay; @@ -242,11 +232,11 @@ int MiWrite(struct et131x_adapter *adapter, uint8_t xcvrReg, uint16_t value) if (delay == 100) { uint16_t TempValue; - DBG_WARNING(et131x_dbginfo, - "xcvrReg 0x%08x could not be written", xcvrReg); - DBG_WARNING(et131x_dbginfo, "status is 0x%08x\n", + dev_warn(&adapter->pdev->dev, + "xcvrReg 0x%08x could not be written", xcvrReg); + dev_warn(&adapter->pdev->dev, "status is 0x%08x\n", miiIndicator.value); - DBG_WARNING(et131x_dbginfo, "command is 0x%08x\n", + dev_warn(&adapter->pdev->dev, "command is 0x%08x\n", readl(&mac->mii_mgmt_cmd.value)); MiRead(adapter, xcvrReg, &TempValue); @@ -258,15 +248,11 @@ int MiWrite(struct et131x_adapter *adapter, uint8_t xcvrReg, uint16_t value) writel(0, &mac->mii_mgmt_cmd.value); /* set the registers we touched back to the state at which we entered - * this function - */ + * this function + */ writel(miiAddr.value, &mac->mii_mgmt_addr.value); writel(miiCmd.value, &mac->mii_mgmt_cmd.value); - DBG_VERBOSE(et131x_dbginfo, " xcvr_addr = 0x%02x, " - "xcvr_reg = 0x%02x, " - "value = 0x%04x.\n", xcvrAddr, xcvrReg, value); - return status; } @@ -284,8 +270,6 @@ int et131x_xcvr_find(struct et131x_adapter *adapter) MI_IDR2_t idr2; uint32_t xcvr_id; - DBG_ENTER(et131x_dbginfo); - /* We need to get xcvr id and address we just get the first one */ for (xcvr_addr = 0; xcvr_addr < 32; xcvr_addr++) { /* Read the ID from the PHY */ @@ -299,10 +283,6 @@ int et131x_xcvr_find(struct et131x_adapter *adapter) xcvr_id = (uint32_t) ((idr1.value << 16) | idr2.value); if ((idr1.value != 0) && (idr1.value != 0xffff)) { - DBG_TRACE(et131x_dbginfo, - "Xcvr addr: 0x%02x\tXcvr_id: 0x%08x\n", - xcvr_addr, xcvr_id); - adapter->Stats.xcvr_id = xcvr_id; adapter->Stats.xcvr_addr = xcvr_addr; @@ -310,8 +290,6 @@ int et131x_xcvr_find(struct et131x_adapter *adapter) break; } } - - DBG_LEAVE(et131x_dbginfo); return status; } @@ -327,13 +305,9 @@ int et131x_setphy_normal(struct et131x_adapter *adapter) { int status; - DBG_ENTER(et131x_dbginfo); - /* Make sure the PHY is powered up */ ET1310_PhyPowerDown(adapter, 0); status = et131x_xcvr_init(adapter); - - DBG_LEAVE(et131x_dbginfo); return status; } @@ -350,8 +324,6 @@ static int et131x_xcvr_init(struct et131x_adapter *adapter) MI_ISR_t isr; MI_LCR2_t lcr2; - DBG_ENTER(et131x_dbginfo); - /* Zero out the adapter structure variable representing BMSR */ adapter->Bmsr.value = 0; @@ -412,8 +384,6 @@ static int et131x_xcvr_init(struct et131x_adapter *adapter) /* NOTE - Do we need this? */ ET1310_PhyAccessMiBit(adapter, TRUEPHY_BIT_SET, 0, 9, NULL); - - DBG_LEAVE(et131x_dbginfo); return status; } else { ET1310_PhyAutoNeg(adapter, false); @@ -449,79 +419,75 @@ static int et131x_xcvr_init(struct et131x_adapter *adapter) switch (adapter->AiForceSpeed) { case 10: - if (adapter->AiForceDpx == 1) { + if (adapter->AiForceDpx == 1) TPAL_SetPhy10HalfDuplex(adapter); - } else if (adapter->AiForceDpx == 2) { + else if (adapter->AiForceDpx == 2) TPAL_SetPhy10FullDuplex(adapter); - } else { + else TPAL_SetPhy10Force(adapter); - } break; case 100: - if (adapter->AiForceDpx == 1) { + if (adapter->AiForceDpx == 1) TPAL_SetPhy100HalfDuplex(adapter); - } else if (adapter->AiForceDpx == 2) { + else if (adapter->AiForceDpx == 2) TPAL_SetPhy100FullDuplex(adapter); - } else { + else TPAL_SetPhy100Force(adapter); - } break; case 1000: TPAL_SetPhy1000FullDuplex(adapter); break; } - DBG_LEAVE(et131x_dbginfo); return status; } } -void et131x_Mii_check(struct et131x_adapter *pAdapter, +void et131x_Mii_check(struct et131x_adapter *etdev, MI_BMSR_t bmsr, MI_BMSR_t bmsr_ints) { - uint8_t ucLinkStatus; - uint32_t uiAutoNegStatus; - uint32_t uiSpeed; - uint32_t uiDuplex; - uint32_t uiMdiMdix; - uint32_t uiMasterSlave; - uint32_t uiPolarity; - unsigned long lockflags; - - DBG_ENTER(et131x_dbginfo); + uint8_t link_status; + uint32_t autoneg_status; + uint32_t speed; + uint32_t duplex; + uint32_t mdi_mdix; + uint32_t masterslave; + uint32_t polarity; + unsigned long flags; if (bmsr_ints.bits.link_status) { if (bmsr.bits.link_status) { - pAdapter->PoMgmt.TransPhyComaModeOnBoot = 20; + etdev->PoMgmt.TransPhyComaModeOnBoot = 20; /* Update our state variables and indicate the * connected state */ - spin_lock_irqsave(&pAdapter->Lock, lockflags); + spin_lock_irqsave(&etdev->Lock, flags); - pAdapter->MediaState = NETIF_STATUS_MEDIA_CONNECT; - MP_CLEAR_FLAG(pAdapter, fMP_ADAPTER_LINK_DETECTION); + etdev->MediaState = NETIF_STATUS_MEDIA_CONNECT; + etdev->Flags &= ~fMP_ADAPTER_LINK_DETECTION; - spin_unlock_irqrestore(&pAdapter->Lock, lockflags); + spin_unlock_irqrestore(&etdev->Lock, flags); /* Don't indicate state if we're in loopback mode */ - if (pAdapter->RegistryPhyLoopbk == false) { - netif_carrier_on(pAdapter->netdev); - } + if (etdev->RegistryPhyLoopbk == false) + netif_carrier_on(etdev->netdev); } else { - DBG_WARNING(et131x_dbginfo, - "Link down cable problem\n"); + dev_warn(&etdev->pdev->dev, + "Link down - cable problem ?\n"); - if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_10MBPS) { - // NOTE - Is there a way to query this without TruePHY? - // && TRU_QueryCoreType(pAdapter->hTruePhy, 0) == EMI_TRUEPHY_A13O) { + if (etdev->linkspeed == TRUEPHY_SPEED_10MBPS) { + /* NOTE - Is there a way to query this without + * TruePHY? + * && TRU_QueryCoreType(etdev->hTruePhy, 0) == EMI_TRUEPHY_A13O) { + */ uint16_t Register18; - MiRead(pAdapter, 0x12, &Register18); - MiWrite(pAdapter, 0x12, Register18 | 0x4); - MiWrite(pAdapter, 0x10, Register18 | 0x8402); - MiWrite(pAdapter, 0x11, Register18 | 511); - MiWrite(pAdapter, 0x12, Register18); + MiRead(etdev, 0x12, &Register18); + MiWrite(etdev, 0x12, Register18 | 0x4); + MiWrite(etdev, 0x10, Register18 | 0x8402); + MiWrite(etdev, 0x11, Register18 | 511); + MiWrite(etdev, 0x12, Register18); } /* For the first N seconds of life, we are in "link @@ -530,35 +496,32 @@ void et131x_Mii_check(struct et131x_adapter *pAdapter, * Timer expires, we can report disconnected (handled * in the LinkDetectionDPC). */ - if ((MP_IS_FLAG_CLEAR - (pAdapter, fMP_ADAPTER_LINK_DETECTION)) - || (pAdapter->MediaState == - NETIF_STATUS_MEDIA_DISCONNECT)) { - spin_lock_irqsave(&pAdapter->Lock, lockflags); - pAdapter->MediaState = + if (!(etdev->Flags & fMP_ADAPTER_LINK_DETECTION) || + (etdev->MediaState == NETIF_STATUS_MEDIA_DISCONNECT)) { + spin_lock_irqsave(&etdev->Lock, flags); + etdev->MediaState = NETIF_STATUS_MEDIA_DISCONNECT; - spin_unlock_irqrestore(&pAdapter->Lock, - lockflags); + spin_unlock_irqrestore(&etdev->Lock, + flags); /* Only indicate state if we're in loopback * mode */ - if (pAdapter->RegistryPhyLoopbk == false) { - netif_carrier_off(pAdapter->netdev); - } + if (etdev->RegistryPhyLoopbk == false) + netif_carrier_off(etdev->netdev); } - pAdapter->uiLinkSpeed = 0; - pAdapter->uiDuplexMode = 0; + etdev->linkspeed = 0; + etdev->duplex_mode = 0; /* Free the packets being actively sent & stopped */ - et131x_free_busy_send_packets(pAdapter); + et131x_free_busy_send_packets(etdev); /* Re-initialize the send structures */ - et131x_init_send(pAdapter); + et131x_init_send(etdev); /* Reset the RFD list and re-start RU */ - et131x_reset_recv(pAdapter); + et131x_reset_recv(etdev); /* * Bring the device back to the state it was during @@ -566,296 +529,256 @@ void et131x_Mii_check(struct et131x_adapter *pAdapter, * way, when we get the auto-neg complete interrupt, * we can complete init by calling ConfigMacREGS2. */ - et131x_soft_reset(pAdapter); + et131x_soft_reset(etdev); /* Setup ET1310 as per the documentation */ - et131x_adapter_setup(pAdapter); + et131x_adapter_setup(etdev); /* Setup the PHY into coma mode until the cable is * plugged back in */ - if (pAdapter->RegistryPhyComa == 1) { - EnablePhyComa(pAdapter); - } + if (etdev->RegistryPhyComa == 1) + EnablePhyComa(etdev); } } if (bmsr_ints.bits.auto_neg_complete || - ((pAdapter->AiForceDpx == 3) && (bmsr_ints.bits.link_status))) { - if (bmsr.bits.auto_neg_complete || (pAdapter->AiForceDpx == 3)) { - ET1310_PhyLinkStatus(pAdapter, - &ucLinkStatus, &uiAutoNegStatus, - &uiSpeed, &uiDuplex, &uiMdiMdix, - &uiMasterSlave, &uiPolarity); - - pAdapter->uiLinkSpeed = uiSpeed; - pAdapter->uiDuplexMode = uiDuplex; - - DBG_TRACE(et131x_dbginfo, - "pAdapter->uiLinkSpeed 0x%04x, pAdapter->uiDuplex 0x%08x\n", - pAdapter->uiLinkSpeed, - pAdapter->uiDuplexMode); - - pAdapter->PoMgmt.TransPhyComaModeOnBoot = 20; - - if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_10MBPS) { - // NOTE - Is there a way to query this without TruePHY? - // && TRU_QueryCoreType(pAdapter->hTruePhy, 0) == EMI_TRUEPHY_A13O) { + (etdev->AiForceDpx == 3 && bmsr_ints.bits.link_status)) { + if (bmsr.bits.auto_neg_complete || etdev->AiForceDpx == 3) { + ET1310_PhyLinkStatus(etdev, + &link_status, &autoneg_status, + &speed, &duplex, &mdi_mdix, + &masterslave, &polarity); + + etdev->linkspeed = speed; + etdev->duplex_mode = duplex; + + etdev->PoMgmt.TransPhyComaModeOnBoot = 20; + + if (etdev->linkspeed == TRUEPHY_SPEED_10MBPS) { + /* + * NOTE - Is there a way to query this without + * TruePHY? + * && TRU_QueryCoreType(etdev->hTruePhy, 0)== EMI_TRUEPHY_A13O) { + */ uint16_t Register18; - MiRead(pAdapter, 0x12, &Register18); - MiWrite(pAdapter, 0x12, Register18 | 0x4); - MiWrite(pAdapter, 0x10, Register18 | 0x8402); - MiWrite(pAdapter, 0x11, Register18 | 511); - MiWrite(pAdapter, 0x12, Register18); + MiRead(etdev, 0x12, &Register18); + MiWrite(etdev, 0x12, Register18 | 0x4); + MiWrite(etdev, 0x10, Register18 | 0x8402); + MiWrite(etdev, 0x11, Register18 | 511); + MiWrite(etdev, 0x12, Register18); } - ConfigFlowControl(pAdapter); + ConfigFlowControl(etdev); - if ((pAdapter->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) && - (pAdapter->RegistryJumboPacket > 2048)) - { - ET1310_PhyAndOrReg(pAdapter, 0x16, 0xcfff, - 0x2000); - } + if (etdev->linkspeed == TRUEPHY_SPEED_1000MBPS && + etdev->RegistryJumboPacket > 2048) + ET1310_PhyAndOrReg(etdev, 0x16, 0xcfff, + 0x2000); - SetRxDmaTimer(pAdapter); - ConfigMACRegs2(pAdapter); + SetRxDmaTimer(etdev); + ConfigMACRegs2(etdev); } } - - DBG_LEAVE(et131x_dbginfo); } /** * TPAL_SetPhy10HalfDuplex - Force the phy into 10 Base T Half Duplex mode. - * @pAdapter: pointer to the adapter structure + * @etdev: pointer to the adapter structure * * Also sets the MAC so it is syncd up properly */ -void TPAL_SetPhy10HalfDuplex(struct et131x_adapter *pAdapter) +void TPAL_SetPhy10HalfDuplex(struct et131x_adapter *etdev) { - DBG_ENTER(et131x_dbginfo); - /* Power down PHY */ - ET1310_PhyPowerDown(pAdapter, 1); + ET1310_PhyPowerDown(etdev, 1); /* First we need to turn off all other advertisement */ - ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); - ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise100BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); /* Set our advertise values accordingly */ - ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_HALF); + ET1310_PhyAdvertise10BaseT(etdev, TRUEPHY_ADV_DUPLEX_HALF); /* Power up PHY */ - ET1310_PhyPowerDown(pAdapter, 0); - - DBG_LEAVE(et131x_dbginfo); + ET1310_PhyPowerDown(etdev, 0); } /** * TPAL_SetPhy10FullDuplex - Force the phy into 10 Base T Full Duplex mode. - * @pAdapter: pointer to the adapter structure + * @etdev: pointer to the adapter structure * * Also sets the MAC so it is syncd up properly */ -void TPAL_SetPhy10FullDuplex(struct et131x_adapter *pAdapter) +void TPAL_SetPhy10FullDuplex(struct et131x_adapter *etdev) { - DBG_ENTER(et131x_dbginfo); - /* Power down PHY */ - ET1310_PhyPowerDown(pAdapter, 1); + ET1310_PhyPowerDown(etdev, 1); /* First we need to turn off all other advertisement */ - ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); - ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise100BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); /* Set our advertise values accordingly */ - ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_FULL); + ET1310_PhyAdvertise10BaseT(etdev, TRUEPHY_ADV_DUPLEX_FULL); /* Power up PHY */ - ET1310_PhyPowerDown(pAdapter, 0); - - DBG_LEAVE(et131x_dbginfo); + ET1310_PhyPowerDown(etdev, 0); } /** * TPAL_SetPhy10Force - Force Base-T FD mode WITHOUT using autonegotiation - * @pAdapter: pointer to the adapter structure + * @etdev: pointer to the adapter structure */ -void TPAL_SetPhy10Force(struct et131x_adapter *pAdapter) +void TPAL_SetPhy10Force(struct et131x_adapter *etdev) { - DBG_ENTER(et131x_dbginfo); - /* Power down PHY */ - ET1310_PhyPowerDown(pAdapter, 1); + ET1310_PhyPowerDown(etdev, 1); /* Disable autoneg */ - ET1310_PhyAutoNeg(pAdapter, false); + ET1310_PhyAutoNeg(etdev, false); /* Disable all advertisement */ - ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); - ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); - ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise10BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise100BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); /* Force 10 Mbps */ - ET1310_PhySpeedSelect(pAdapter, TRUEPHY_SPEED_10MBPS); + ET1310_PhySpeedSelect(etdev, TRUEPHY_SPEED_10MBPS); /* Force Full duplex */ - ET1310_PhyDuplexMode(pAdapter, TRUEPHY_DUPLEX_FULL); + ET1310_PhyDuplexMode(etdev, TRUEPHY_DUPLEX_FULL); /* Power up PHY */ - ET1310_PhyPowerDown(pAdapter, 0); - - DBG_LEAVE(et131x_dbginfo); + ET1310_PhyPowerDown(etdev, 0); } /** * TPAL_SetPhy100HalfDuplex - Force 100 Base T Half Duplex mode. - * @pAdapter: pointer to the adapter structure + * @etdev: pointer to the adapter structure * * Also sets the MAC so it is syncd up properly. */ -void TPAL_SetPhy100HalfDuplex(struct et131x_adapter *pAdapter) +void TPAL_SetPhy100HalfDuplex(struct et131x_adapter *etdev) { - DBG_ENTER(et131x_dbginfo); - /* Power down PHY */ - ET1310_PhyPowerDown(pAdapter, 1); + ET1310_PhyPowerDown(etdev, 1); /* first we need to turn off all other advertisement */ - ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); - ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise10BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); /* Set our advertise values accordingly */ - ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_HALF); + ET1310_PhyAdvertise100BaseT(etdev, TRUEPHY_ADV_DUPLEX_HALF); /* Set speed */ - ET1310_PhySpeedSelect(pAdapter, TRUEPHY_SPEED_100MBPS); + ET1310_PhySpeedSelect(etdev, TRUEPHY_SPEED_100MBPS); /* Power up PHY */ - ET1310_PhyPowerDown(pAdapter, 0); - - DBG_LEAVE(et131x_dbginfo); + ET1310_PhyPowerDown(etdev, 0); } /** * TPAL_SetPhy100FullDuplex - Force 100 Base T Full Duplex mode. - * @pAdapter: pointer to the adapter structure + * @etdev: pointer to the adapter structure * * Also sets the MAC so it is syncd up properly */ -void TPAL_SetPhy100FullDuplex(struct et131x_adapter *pAdapter) +void TPAL_SetPhy100FullDuplex(struct et131x_adapter *etdev) { - DBG_ENTER(et131x_dbginfo); - /* Power down PHY */ - ET1310_PhyPowerDown(pAdapter, 1); + ET1310_PhyPowerDown(etdev, 1); /* First we need to turn off all other advertisement */ - ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); - ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise10BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); /* Set our advertise values accordingly */ - ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_FULL); + ET1310_PhyAdvertise100BaseT(etdev, TRUEPHY_ADV_DUPLEX_FULL); /* Power up PHY */ - ET1310_PhyPowerDown(pAdapter, 0); - - DBG_LEAVE(et131x_dbginfo); + ET1310_PhyPowerDown(etdev, 0); } /** * TPAL_SetPhy100Force - Force 100 BaseT FD mode WITHOUT using autonegotiation - * @pAdapter: pointer to the adapter structure + * @etdev: pointer to the adapter structure */ -void TPAL_SetPhy100Force(struct et131x_adapter *pAdapter) +void TPAL_SetPhy100Force(struct et131x_adapter *etdev) { - DBG_ENTER(et131x_dbginfo); - /* Power down PHY */ - ET1310_PhyPowerDown(pAdapter, 1); + ET1310_PhyPowerDown(etdev, 1); /* Disable autoneg */ - ET1310_PhyAutoNeg(pAdapter, false); + ET1310_PhyAutoNeg(etdev, false); /* Disable all advertisement */ - ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); - ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); - ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise10BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise100BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); /* Force 100 Mbps */ - ET1310_PhySpeedSelect(pAdapter, TRUEPHY_SPEED_100MBPS); + ET1310_PhySpeedSelect(etdev, TRUEPHY_SPEED_100MBPS); /* Force Full duplex */ - ET1310_PhyDuplexMode(pAdapter, TRUEPHY_DUPLEX_FULL); + ET1310_PhyDuplexMode(etdev, TRUEPHY_DUPLEX_FULL); /* Power up PHY */ - ET1310_PhyPowerDown(pAdapter, 0); - - DBG_LEAVE(et131x_dbginfo); + ET1310_PhyPowerDown(etdev, 0); } /** * TPAL_SetPhy1000FullDuplex - Force 1000 Base T Full Duplex mode - * @pAdapter: pointer to the adapter structure + * @etdev: pointer to the adapter structure * * Also sets the MAC so it is syncd up properly. */ -void TPAL_SetPhy1000FullDuplex(struct et131x_adapter *pAdapter) +void TPAL_SetPhy1000FullDuplex(struct et131x_adapter *etdev) { - DBG_ENTER(et131x_dbginfo); - /* Power down PHY */ - ET1310_PhyPowerDown(pAdapter, 1); + ET1310_PhyPowerDown(etdev, 1); /* first we need to turn off all other advertisement */ - ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise100BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); - ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); + ET1310_PhyAdvertise10BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); /* set our advertise values accordingly */ - ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_FULL); + ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_FULL); /* power up PHY */ - ET1310_PhyPowerDown(pAdapter, 0); - - DBG_LEAVE(et131x_dbginfo); + ET1310_PhyPowerDown(etdev, 0); } /** * TPAL_SetPhyAutoNeg - Set phy to autonegotiation mode. - * @pAdapter: pointer to the adapter structure + * @etdev: pointer to the adapter structure */ -void TPAL_SetPhyAutoNeg(struct et131x_adapter *pAdapter) +void TPAL_SetPhyAutoNeg(struct et131x_adapter *etdev) { - DBG_ENTER(et131x_dbginfo); - /* Power down PHY */ - ET1310_PhyPowerDown(pAdapter, 1); + ET1310_PhyPowerDown(etdev, 1); /* Turn on advertisement of all capabilities */ - ET1310_PhyAdvertise10BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_BOTH); + ET1310_PhyAdvertise10BaseT(etdev, TRUEPHY_ADV_DUPLEX_BOTH); - ET1310_PhyAdvertise100BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_BOTH); + ET1310_PhyAdvertise100BaseT(etdev, TRUEPHY_ADV_DUPLEX_BOTH); - if (pAdapter->DeviceID != ET131X_PCI_DEVICE_ID_FAST) { - ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_FULL); - } else { - ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); - } + if (etdev->pdev->device != ET131X_PCI_DEVICE_ID_FAST) + ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_FULL); + else + ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); /* Make sure auto-neg is ON (it is disabled in FORCE modes) */ - ET1310_PhyAutoNeg(pAdapter, true); + ET1310_PhyAutoNeg(etdev, true); /* Power up PHY */ - ET1310_PhyPowerDown(pAdapter, 0); - - DBG_LEAVE(et131x_dbginfo); + ET1310_PhyPowerDown(etdev, 0); } @@ -906,371 +829,368 @@ static const uint16_t ConfigPhy[25][2] = { }; /* condensed version of the phy initialization routine */ -void ET1310_PhyInit(struct et131x_adapter *pAdapter) +void ET1310_PhyInit(struct et131x_adapter *etdev) { - uint16_t usData, usIndex; + uint16_t data, index; - if (pAdapter == NULL) { + if (etdev == NULL) return; - } - // get the identity (again ?) - MiRead(pAdapter, PHY_ID_1, &usData); - MiRead(pAdapter, PHY_ID_2, &usData); + /* get the identity (again ?) */ + MiRead(etdev, PHY_ID_1, &data); + MiRead(etdev, PHY_ID_2, &data); - // what does this do/achieve ? - MiRead(pAdapter, PHY_MPHY_CONTROL_REG, &usData); // should read 0002 - MiWrite(pAdapter, PHY_MPHY_CONTROL_REG, 0x0006); + /* what does this do/achieve ? */ + MiRead(etdev, PHY_MPHY_CONTROL_REG, &data); /* should read 0002 */ + MiWrite(etdev, PHY_MPHY_CONTROL_REG, 0x0006); - // read modem register 0402, should I do something with the return data ? - MiWrite(pAdapter, PHY_INDEX_REG, 0x0402); - MiRead(pAdapter, PHY_DATA_REG, &usData); + /* read modem register 0402, should I do something with the return + data ? */ + MiWrite(etdev, PHY_INDEX_REG, 0x0402); + MiRead(etdev, PHY_DATA_REG, &data); - // what does this do/achieve ? - MiWrite(pAdapter, PHY_MPHY_CONTROL_REG, 0x0002); + /* what does this do/achieve ? */ + MiWrite(etdev, PHY_MPHY_CONTROL_REG, 0x0002); - // get the identity (again ?) - MiRead(pAdapter, PHY_ID_1, &usData); - MiRead(pAdapter, PHY_ID_2, &usData); + /* get the identity (again ?) */ + MiRead(etdev, PHY_ID_1, &data); + MiRead(etdev, PHY_ID_2, &data); - // what does this achieve ? - MiRead(pAdapter, PHY_MPHY_CONTROL_REG, &usData); // should read 0002 - MiWrite(pAdapter, PHY_MPHY_CONTROL_REG, 0x0006); + /* what does this achieve ? */ + MiRead(etdev, PHY_MPHY_CONTROL_REG, &data); /* should read 0002 */ + MiWrite(etdev, PHY_MPHY_CONTROL_REG, 0x0006); - // read modem register 0402, should I do something with the return data? - MiWrite(pAdapter, PHY_INDEX_REG, 0x0402); - MiRead(pAdapter, PHY_DATA_REG, &usData); + /* read modem register 0402, should I do something with + the return data? */ + MiWrite(etdev, PHY_INDEX_REG, 0x0402); + MiRead(etdev, PHY_DATA_REG, &data); - MiWrite(pAdapter, PHY_MPHY_CONTROL_REG, 0x0002); + MiWrite(etdev, PHY_MPHY_CONTROL_REG, 0x0002); - // what does this achieve (should return 0x1040) - MiRead(pAdapter, PHY_CONTROL, &usData); - MiRead(pAdapter, PHY_MPHY_CONTROL_REG, &usData); // should read 0002 - MiWrite(pAdapter, PHY_CONTROL, 0x1840); + /* what does this achieve (should return 0x1040) */ + MiRead(etdev, PHY_CONTROL, &data); + MiRead(etdev, PHY_MPHY_CONTROL_REG, &data); /* should read 0002 */ + MiWrite(etdev, PHY_CONTROL, 0x1840); - MiWrite(pAdapter, PHY_MPHY_CONTROL_REG, 0x0007); + MiWrite(etdev, PHY_MPHY_CONTROL_REG, 0x0007); - // here the writing of the array starts.... - usIndex = 0; - while (ConfigPhy[usIndex][0] != 0x0000) { - // write value - MiWrite(pAdapter, PHY_INDEX_REG, ConfigPhy[usIndex][0]); - MiWrite(pAdapter, PHY_DATA_REG, ConfigPhy[usIndex][1]); + /* here the writing of the array starts.... */ + index = 0; + while (ConfigPhy[index][0] != 0x0000) { + /* write value */ + MiWrite(etdev, PHY_INDEX_REG, ConfigPhy[index][0]); + MiWrite(etdev, PHY_DATA_REG, ConfigPhy[index][1]); - // read it back - MiWrite(pAdapter, PHY_INDEX_REG, ConfigPhy[usIndex][0]); - MiRead(pAdapter, PHY_DATA_REG, &usData); + /* read it back */ + MiWrite(etdev, PHY_INDEX_REG, ConfigPhy[index][0]); + MiRead(etdev, PHY_DATA_REG, &data); - // do a check on the value read back ? - usIndex++; + /* do a check on the value read back ? */ + index++; } - // here the writing of the array ends... + /* here the writing of the array ends... */ - MiRead(pAdapter, PHY_CONTROL, &usData); // 0x1840 - MiRead(pAdapter, PHY_MPHY_CONTROL_REG, &usData); // should read 0007 - MiWrite(pAdapter, PHY_CONTROL, 0x1040); - MiWrite(pAdapter, PHY_MPHY_CONTROL_REG, 0x0002); + MiRead(etdev, PHY_CONTROL, &data); /* 0x1840 */ + MiRead(etdev, PHY_MPHY_CONTROL_REG, &data);/* should read 0007 */ + MiWrite(etdev, PHY_CONTROL, 0x1040); + MiWrite(etdev, PHY_MPHY_CONTROL_REG, 0x0002); } -void ET1310_PhyReset(struct et131x_adapter *pAdapter) +void ET1310_PhyReset(struct et131x_adapter *etdev) { - MiWrite(pAdapter, PHY_CONTROL, 0x8000); + MiWrite(etdev, PHY_CONTROL, 0x8000); } -void ET1310_PhyPowerDown(struct et131x_adapter *pAdapter, bool down) +void ET1310_PhyPowerDown(struct et131x_adapter *etdev, bool down) { - uint16_t usData; + uint16_t data; - MiRead(pAdapter, PHY_CONTROL, &usData); + MiRead(etdev, PHY_CONTROL, &data); if (down == false) { - // Power UP - usData &= ~0x0800; - MiWrite(pAdapter, PHY_CONTROL, usData); + /* Power UP */ + data &= ~0x0800; + MiWrite(etdev, PHY_CONTROL, data); } else { - // Power DOWN - usData |= 0x0800; - MiWrite(pAdapter, PHY_CONTROL, usData); + /* Power DOWN */ + data |= 0x0800; + MiWrite(etdev, PHY_CONTROL, data); } } -void ET1310_PhyAutoNeg(struct et131x_adapter *pAdapter, bool enable) +void ET1310_PhyAutoNeg(struct et131x_adapter *etdev, bool enable) { - uint16_t usData; + uint16_t data; - MiRead(pAdapter, PHY_CONTROL, &usData); + MiRead(etdev, PHY_CONTROL, &data); if (enable == true) { - // Autonegotiation ON - usData |= 0x1000; - MiWrite(pAdapter, PHY_CONTROL, usData); + /* Autonegotiation ON */ + data |= 0x1000; + MiWrite(etdev, PHY_CONTROL, data); } else { - // Autonegotiation OFF - usData &= ~0x1000; - MiWrite(pAdapter, PHY_CONTROL, usData); + /* Autonegotiation OFF */ + data &= ~0x1000; + MiWrite(etdev, PHY_CONTROL, data); } } -void ET1310_PhyDuplexMode(struct et131x_adapter *pAdapter, uint16_t duplex) +void ET1310_PhyDuplexMode(struct et131x_adapter *etdev, uint16_t duplex) { - uint16_t usData; + uint16_t data; - MiRead(pAdapter, PHY_CONTROL, &usData); + MiRead(etdev, PHY_CONTROL, &data); if (duplex == TRUEPHY_DUPLEX_FULL) { - // Set Full Duplex - usData |= 0x100; - MiWrite(pAdapter, PHY_CONTROL, usData); + /* Set Full Duplex */ + data |= 0x100; + MiWrite(etdev, PHY_CONTROL, data); } else { - // Set Half Duplex - usData &= ~0x100; - MiWrite(pAdapter, PHY_CONTROL, usData); + /* Set Half Duplex */ + data &= ~0x100; + MiWrite(etdev, PHY_CONTROL, data); } } -void ET1310_PhySpeedSelect(struct et131x_adapter *pAdapter, uint16_t speed) +void ET1310_PhySpeedSelect(struct et131x_adapter *etdev, uint16_t speed) { - uint16_t usData; + uint16_t data; - // Read the PHY control register - MiRead(pAdapter, PHY_CONTROL, &usData); + /* Read the PHY control register */ + MiRead(etdev, PHY_CONTROL, &data); - // Clear all Speed settings (Bits 6, 13) - usData &= ~0x2040; + /* Clear all Speed settings (Bits 6, 13) */ + data &= ~0x2040; - // Reset the speed bits based on user selection + /* Reset the speed bits based on user selection */ switch (speed) { case TRUEPHY_SPEED_10MBPS: - // Bits already cleared above, do nothing + /* Bits already cleared above, do nothing */ break; case TRUEPHY_SPEED_100MBPS: - // 100M == Set bit 13 - usData |= 0x2000; + /* 100M == Set bit 13 */ + data |= 0x2000; break; case TRUEPHY_SPEED_1000MBPS: default: - usData |= 0x0040; + data |= 0x0040; break; } - // Write back the new speed - MiWrite(pAdapter, PHY_CONTROL, usData); + /* Write back the new speed */ + MiWrite(etdev, PHY_CONTROL, data); } -void ET1310_PhyAdvertise1000BaseT(struct et131x_adapter *pAdapter, +void ET1310_PhyAdvertise1000BaseT(struct et131x_adapter *etdev, uint16_t duplex) { - uint16_t usData; + uint16_t data; - // Read the PHY 1000 Base-T Control Register - MiRead(pAdapter, PHY_1000_CONTROL, &usData); + /* Read the PHY 1000 Base-T Control Register */ + MiRead(etdev, PHY_1000_CONTROL, &data); - // Clear Bits 8,9 - usData &= ~0x0300; + /* Clear Bits 8,9 */ + data &= ~0x0300; switch (duplex) { case TRUEPHY_ADV_DUPLEX_NONE: - // Duplex already cleared, do nothing + /* Duplex already cleared, do nothing */ break; case TRUEPHY_ADV_DUPLEX_FULL: - // Set Bit 9 - usData |= 0x0200; + /* Set Bit 9 */ + data |= 0x0200; break; case TRUEPHY_ADV_DUPLEX_HALF: - // Set Bit 8 - usData |= 0x0100; + /* Set Bit 8 */ + data |= 0x0100; break; case TRUEPHY_ADV_DUPLEX_BOTH: default: - usData |= 0x0300; + data |= 0x0300; break; } - // Write back advertisement - MiWrite(pAdapter, PHY_1000_CONTROL, usData); + /* Write back advertisement */ + MiWrite(etdev, PHY_1000_CONTROL, data); } -void ET1310_PhyAdvertise100BaseT(struct et131x_adapter *pAdapter, +void ET1310_PhyAdvertise100BaseT(struct et131x_adapter *etdev, uint16_t duplex) { - uint16_t usData; + uint16_t data; - // Read the Autonegotiation Register (10/100) - MiRead(pAdapter, PHY_AUTO_ADVERTISEMENT, &usData); + /* Read the Autonegotiation Register (10/100) */ + MiRead(etdev, PHY_AUTO_ADVERTISEMENT, &data); - // Clear bits 7,8 - usData &= ~0x0180; + /* Clear bits 7,8 */ + data &= ~0x0180; switch (duplex) { case TRUEPHY_ADV_DUPLEX_NONE: - // Duplex already cleared, do nothing + /* Duplex already cleared, do nothing */ break; case TRUEPHY_ADV_DUPLEX_FULL: - // Set Bit 8 - usData |= 0x0100; + /* Set Bit 8 */ + data |= 0x0100; break; case TRUEPHY_ADV_DUPLEX_HALF: - // Set Bit 7 - usData |= 0x0080; + /* Set Bit 7 */ + data |= 0x0080; break; case TRUEPHY_ADV_DUPLEX_BOTH: default: - // Set Bits 7,8 - usData |= 0x0180; + /* Set Bits 7,8 */ + data |= 0x0180; break; } - // Write back advertisement - MiWrite(pAdapter, PHY_AUTO_ADVERTISEMENT, usData); + /* Write back advertisement */ + MiWrite(etdev, PHY_AUTO_ADVERTISEMENT, data); } -void ET1310_PhyAdvertise10BaseT(struct et131x_adapter *pAdapter, +void ET1310_PhyAdvertise10BaseT(struct et131x_adapter *etdev, uint16_t duplex) { - uint16_t usData; + uint16_t data; - // Read the Autonegotiation Register (10/100) - MiRead(pAdapter, PHY_AUTO_ADVERTISEMENT, &usData); + /* Read the Autonegotiation Register (10/100) */ + MiRead(etdev, PHY_AUTO_ADVERTISEMENT, &data); - // Clear bits 5,6 - usData &= ~0x0060; + /* Clear bits 5,6 */ + data &= ~0x0060; switch (duplex) { case TRUEPHY_ADV_DUPLEX_NONE: - // Duplex already cleared, do nothing + /* Duplex already cleared, do nothing */ break; case TRUEPHY_ADV_DUPLEX_FULL: - // Set Bit 6 - usData |= 0x0040; + /* Set Bit 6 */ + data |= 0x0040; break; case TRUEPHY_ADV_DUPLEX_HALF: - // Set Bit 5 - usData |= 0x0020; + /* Set Bit 5 */ + data |= 0x0020; break; case TRUEPHY_ADV_DUPLEX_BOTH: default: - // Set Bits 5,6 - usData |= 0x0060; + /* Set Bits 5,6 */ + data |= 0x0060; break; } - // Write back advertisement - MiWrite(pAdapter, PHY_AUTO_ADVERTISEMENT, usData); + /* Write back advertisement */ + MiWrite(etdev, PHY_AUTO_ADVERTISEMENT, data); } -void ET1310_PhyLinkStatus(struct et131x_adapter *pAdapter, - uint8_t *ucLinkStatus, - uint32_t *uiAutoNeg, - uint32_t *uiLinkSpeed, - uint32_t *uiDuplexMode, - uint32_t *uiMdiMdix, - uint32_t *uiMasterSlave, uint32_t *uiPolarity) +void ET1310_PhyLinkStatus(struct et131x_adapter *etdev, + uint8_t *link_status, + uint32_t *autoneg, + uint32_t *linkspeed, + uint32_t *duplex_mode, + uint32_t *mdi_mdix, + uint32_t *masterslave, uint32_t *polarity) { - uint16_t usMiStatus = 0; - uint16_t us1000BaseT = 0; - uint16_t usVmiPhyStatus = 0; - uint16_t usControl = 0; - - MiRead(pAdapter, PHY_STATUS, &usMiStatus); - MiRead(pAdapter, PHY_1000_STATUS, &us1000BaseT); - MiRead(pAdapter, PHY_PHY_STATUS, &usVmiPhyStatus); - MiRead(pAdapter, PHY_CONTROL, &usControl); - - if (ucLinkStatus) { - *ucLinkStatus = - (unsigned char)((usVmiPhyStatus & 0x0040) ? 1 : 0); + uint16_t mistatus = 0; + uint16_t is1000BaseT = 0; + uint16_t vmi_phystatus = 0; + uint16_t control = 0; + + MiRead(etdev, PHY_STATUS, &mistatus); + MiRead(etdev, PHY_1000_STATUS, &is1000BaseT); + MiRead(etdev, PHY_PHY_STATUS, &vmi_phystatus); + MiRead(etdev, PHY_CONTROL, &control); + + if (link_status) { + *link_status = + (unsigned char)((vmi_phystatus & 0x0040) ? 1 : 0); } - if (uiAutoNeg) { - *uiAutoNeg = - (usControl & 0x1000) ? ((usVmiPhyStatus & 0x0020) ? + if (autoneg) { + *autoneg = + (control & 0x1000) ? ((vmi_phystatus & 0x0020) ? TRUEPHY_ANEG_COMPLETE : TRUEPHY_ANEG_NOT_COMPLETE) : TRUEPHY_ANEG_DISABLED; } - if (uiLinkSpeed) { - *uiLinkSpeed = (usVmiPhyStatus & 0x0300) >> 8; - } + if (linkspeed) + *linkspeed = (vmi_phystatus & 0x0300) >> 8; - if (uiDuplexMode) { - *uiDuplexMode = (usVmiPhyStatus & 0x0080) >> 7; - } + if (duplex_mode) + *duplex_mode = (vmi_phystatus & 0x0080) >> 7; - if (uiMdiMdix) { + if (mdi_mdix) /* NOTE: Need to complete this */ - *uiMdiMdix = 0; - } + *mdi_mdix = 0; - if (uiMasterSlave) { - *uiMasterSlave = - (us1000BaseT & 0x4000) ? TRUEPHY_CFG_MASTER : + if (masterslave) { + *masterslave = + (is1000BaseT & 0x4000) ? TRUEPHY_CFG_MASTER : TRUEPHY_CFG_SLAVE; } - if (uiPolarity) { - *uiPolarity = - (usVmiPhyStatus & 0x0400) ? TRUEPHY_POLARITY_INVERTED : + if (polarity) { + *polarity = + (vmi_phystatus & 0x0400) ? TRUEPHY_POLARITY_INVERTED : TRUEPHY_POLARITY_NORMAL; } } -void ET1310_PhyAndOrReg(struct et131x_adapter *pAdapter, +void ET1310_PhyAndOrReg(struct et131x_adapter *etdev, uint16_t regnum, uint16_t andMask, uint16_t orMask) { uint16_t reg; - // Read the requested register - MiRead(pAdapter, regnum, ®); + /* Read the requested register */ + MiRead(etdev, regnum, ®); - // Apply the AND mask + /* Apply the AND mask */ reg &= andMask; - // Apply the OR mask + /* Apply the OR mask */ reg |= orMask; - // Write the value back to the register - MiWrite(pAdapter, regnum, reg); + /* Write the value back to the register */ + MiWrite(etdev, regnum, reg); } -void ET1310_PhyAccessMiBit(struct et131x_adapter *pAdapter, uint16_t action, +void ET1310_PhyAccessMiBit(struct et131x_adapter *etdev, uint16_t action, uint16_t regnum, uint16_t bitnum, uint8_t *value) { uint16_t reg; uint16_t mask = 0; - // Create a mask to isolate the requested bit + /* Create a mask to isolate the requested bit */ mask = 0x0001 << bitnum; - // Read the requested register - MiRead(pAdapter, regnum, ®); + /* Read the requested register */ + MiRead(etdev, regnum, ®); switch (action) { case TRUEPHY_BIT_READ: - if (value != NULL) { + if (value != NULL) *value = (reg & mask) >> bitnum; - } break; case TRUEPHY_BIT_SET: reg |= mask; - MiWrite(pAdapter, regnum, reg); + MiWrite(etdev, regnum, reg); break; case TRUEPHY_BIT_CLEAR: reg &= ~mask; - MiWrite(pAdapter, regnum, reg); + MiWrite(etdev, regnum, reg); break; default: diff --git a/drivers/staging/et131x/et1310_phy.h b/drivers/staging/et131x/et1310_phy.h index d624cbb..080656c 100644 --- a/drivers/staging/et131x/et1310_phy.h +++ b/drivers/staging/et131x/et1310_phy.h @@ -2,7 +2,7 @@ * Agere Systems Inc. * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * http://www.agere.com * @@ -20,7 +20,7 @@ * software indicates your acceptance of these terms and conditions. If you do * not agree with these terms and conditions, do not use the software. * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * * Redistribution and use in source or binary forms, with or without @@ -41,7 +41,7 @@ * * Disclaimer * - * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN @@ -63,9 +63,6 @@ #define TRUEPHY_SUCCESS 0 #define TRUEPHY_FAILURE 1 -typedef void *TRUEPHY_HANDLE; -typedef void *TRUEPHY_PLATFORM_HANDLE; -typedef void *TRUEPHY_OSAL_HANDLE; /* MI Register Addresses */ #define MI_CONTROL_REG 0 @@ -105,31 +102,31 @@ typedef void *TRUEPHY_OSAL_HANDLE; /* PHY Register Mapping(MI) Management Interface Regs */ typedef struct _MI_REGS_t { - u8 bmcr; // Basic mode control reg(Reg 0x00) - u8 bmsr; // Basic mode status reg(Reg 0x01) - u8 idr1; // Phy identifier reg 1(Reg 0x02) - u8 idr2; // Phy identifier reg 2(Reg 0x03) - u8 anar; // Auto-Negotiation advertisement(Reg 0x04) - u8 anlpar; // Auto-Negotiation link Partner Ability(Reg 0x05) - u8 aner; // Auto-Negotiation expansion reg(Reg 0x06) - u8 annptr; // Auto-Negotiation next page transmit reg(Reg 0x07) - u8 lpnpr; // link partner next page reg(Reg 0x08) - u8 gcr; // Gigabit basic mode control reg(Reg 0x09) - u8 gsr; // Gigabit basic mode status reg(Reg 0x0A) - u8 mi_res1[4]; // Future use by MI working group(Reg 0x0B - 0x0E) - u8 esr; // Extended status reg(Reg 0x0F) - u8 mi_res2[3]; // Future use by MI working group(Reg 0x10 - 0x12) - u8 loop_ctl; // Loopback Control Reg(Reg 0x13) - u8 mi_res3; // Future use by MI working group(Reg 0x14) - u8 mcr; // MI Control Reg(Reg 0x15) - u8 pcr; // Configuration Reg(Reg 0x16) - u8 phy_ctl; // PHY Control Reg(Reg 0x17) - u8 imr; // Interrupt Mask Reg(Reg 0x18) - u8 isr; // Interrupt Status Reg(Reg 0x19) - u8 psr; // PHY Status Reg(Reg 0x1A) - u8 lcr1; // LED Control 1 Reg(Reg 0x1B) - u8 lcr2; // LED Control 2 Reg(Reg 0x1C) - u8 mi_res4[3]; // Future use by MI working group(Reg 0x1D - 0x1F) + u8 bmcr; /* Basic mode control reg(Reg 0x00) */ + u8 bmsr; /* Basic mode status reg(Reg 0x01) */ + u8 idr1; /* Phy identifier reg 1(Reg 0x02) */ + u8 idr2; /* Phy identifier reg 2(Reg 0x03) */ + u8 anar; /* Auto-Negotiation advertisement(Reg 0x04) */ + u8 anlpar; /* Auto-Negotiation link Partner Ability(Reg 0x05) */ + u8 aner; /* Auto-Negotiation expansion reg(Reg 0x06) */ + u8 annptr; /* Auto-Negotiation next page transmit reg(Reg 0x07) */ + u8 lpnpr; /* link partner next page reg(Reg 0x08) */ + u8 gcr; /* Gigabit basic mode control reg(Reg 0x09) */ + u8 gsr; /* Gigabit basic mode status reg(Reg 0x0A) */ + u8 mi_res1[4]; /* Future use by MI working group(Reg 0x0B - 0x0E) */ + u8 esr; /* Extended status reg(Reg 0x0F) */ + u8 mi_res2[3]; /* Future use by MI working group(Reg 0x10 - 0x12) */ + u8 loop_ctl; /* Loopback Control Reg(Reg 0x13) */ + u8 mi_res3; /* Future use by MI working group(Reg 0x14) */ + u8 mcr; /* MI Control Reg(Reg 0x15) */ + u8 pcr; /* Configuration Reg(Reg 0x16) */ + u8 phy_ctl; /* PHY Control Reg(Reg 0x17) */ + u8 imr; /* Interrupt Mask Reg(Reg 0x18) */ + u8 isr; /* Interrupt Status Reg(Reg 0x19) */ + u8 psr; /* PHY Status Reg(Reg 0x1A) */ + u8 lcr1; /* LED Control 1 Reg(Reg 0x1B) */ + u8 lcr2; /* LED Control 2 Reg(Reg 0x1C) */ + u8 mi_res4[3]; /* Future use by MI working group(Reg 0x1D - 0x1F) */ } MI_REGS_t, *PMI_REGS_t; /* MI Register 0: Basic mode control register */ @@ -137,29 +134,29 @@ typedef union _MI_BMCR_t { u16 value; struct { #ifdef _BIT_FIELDS_HTOL - u16 reset:1; // bit 15 - u16 loopback:1; // bit 14 - u16 speed_sel:1; // bit 13 - u16 enable_autoneg:1; // bit 12 - u16 power_down:1; // bit 11 - u16 isolate:1; // bit 10 - u16 restart_autoneg:1; // bit 9 - u16 duplex_mode:1; // bit 8 - u16 col_test:1; // bit 7 - u16 speed_1000_sel:1; // bit 6 - u16 res1:6; // bits 0-5 + u16 reset:1; /* bit 15 */ + u16 loopback:1; /* bit 14 */ + u16 speed_sel:1; /* bit 13 */ + u16 enable_autoneg:1; /* bit 12 */ + u16 power_down:1; /* bit 11 */ + u16 isolate:1; /* bit 10 */ + u16 restart_autoneg:1; /* bit 9 */ + u16 duplex_mode:1; /* bit 8 */ + u16 col_test:1; /* bit 7 */ + u16 speed_1000_sel:1; /* bit 6 */ + u16 res1:6; /* bits 0-5 */ #else - u16 res1:6; // bits 0-5 - u16 speed_1000_sel:1; // bit 6 - u16 col_test:1; // bit 7 - u16 duplex_mode:1; // bit 8 - u16 restart_autoneg:1; // bit 9 - u16 isolate:1; // bit 10 - u16 power_down:1; // bit 11 - u16 enable_autoneg:1; // bit 12 - u16 speed_sel:1; // bit 13 - u16 loopback:1; // bit 14 - u16 reset:1; // bit 15 + u16 res1:6; /* bits 0-5 */ + u16 speed_1000_sel:1; /* bit 6 */ + u16 col_test:1; /* bit 7 */ + u16 duplex_mode:1; /* bit 8 */ + u16 restart_autoneg:1; /* bit 9 */ + u16 isolate:1; /* bit 10 */ + u16 power_down:1; /* bit 11 */ + u16 enable_autoneg:1; /* bit 12 */ + u16 speed_sel:1; /* bit 13 */ + u16 loopback:1; /* bit 14 */ + u16 reset:1; /* bit 15 */ #endif } bits; } MI_BMCR_t, *PMI_BMCR_t; @@ -169,39 +166,39 @@ typedef union _MI_BMSR_t { u16 value; struct { #ifdef _BIT_FIELDS_HTOL - u16 link_100T4:1; // bit 15 - u16 link_100fdx:1; // bit 14 - u16 link_100hdx:1; // bit 13 - u16 link_10fdx:1; // bit 12 - u16 link_10hdx:1; // bit 11 - u16 link_100T2fdx:1; // bit 10 - u16 link_100T2hdx:1; // bit 9 - u16 extend_status:1; // bit 8 - u16 res1:1; // bit 7 - u16 preamble_supress:1; // bit 6 - u16 auto_neg_complete:1; // bit 5 - u16 remote_fault:1; // bit 4 - u16 auto_neg_able:1; // bit 3 - u16 link_status:1; // bit 2 - u16 jabber_detect:1; // bit 1 - u16 ext_cap:1; // bit 0 + u16 link_100T4:1; /* bit 15 */ + u16 link_100fdx:1; /* bit 14 */ + u16 link_100hdx:1; /* bit 13 */ + u16 link_10fdx:1; /* bit 12 */ + u16 link_10hdx:1; /* bit 11 */ + u16 link_100T2fdx:1; /* bit 10 */ + u16 link_100T2hdx:1; /* bit 9 */ + u16 extend_status:1; /* bit 8 */ + u16 res1:1; /* bit 7 */ + u16 preamble_supress:1; /* bit 6 */ + u16 auto_neg_complete:1; /* bit 5 */ + u16 remote_fault:1; /* bit 4 */ + u16 auto_neg_able:1; /* bit 3 */ + u16 link_status:1; /* bit 2 */ + u16 jabber_detect:1; /* bit 1 */ + u16 ext_cap:1; /* bit 0 */ #else - u16 ext_cap:1; // bit 0 - u16 jabber_detect:1; // bit 1 - u16 link_status:1; // bit 2 - u16 auto_neg_able:1; // bit 3 - u16 remote_fault:1; // bit 4 - u16 auto_neg_complete:1; // bit 5 - u16 preamble_supress:1; // bit 6 - u16 res1:1; // bit 7 - u16 extend_status:1; // bit 8 - u16 link_100T2hdx:1; // bit 9 - u16 link_100T2fdx:1; // bit 10 - u16 link_10hdx:1; // bit 11 - u16 link_10fdx:1; // bit 12 - u16 link_100hdx:1; // bit 13 - u16 link_100fdx:1; // bit 14 - u16 link_100T4:1; // bit 15 + u16 ext_cap:1; /* bit 0 */ + u16 jabber_detect:1; /* bit 1 */ + u16 link_status:1; /* bit 2 */ + u16 auto_neg_able:1; /* bit 3 */ + u16 remote_fault:1; /* bit 4 */ + u16 auto_neg_complete:1; /* bit 5 */ + u16 preamble_supress:1; /* bit 6 */ + u16 res1:1; /* bit 7 */ + u16 extend_status:1; /* bit 8 */ + u16 link_100T2hdx:1; /* bit 9 */ + u16 link_100T2fdx:1; /* bit 10 */ + u16 link_10hdx:1; /* bit 11 */ + u16 link_10fdx:1; /* bit 12 */ + u16 link_100hdx:1; /* bit 13 */ + u16 link_100fdx:1; /* bit 14 */ + u16 link_100T4:1; /* bit 15 */ #endif } bits; } MI_BMSR_t, *PMI_BMSR_t; @@ -210,7 +207,7 @@ typedef union _MI_BMSR_t { typedef union _MI_IDR1_t { u16 value; struct { - u16 ieee_address:16; // 0x0282 default(bits 0-15) + u16 ieee_address:16; /* 0x0282 default(bits 0-15) */ } bits; } MI_IDR1_t, *PMI_IDR1_t; @@ -219,13 +216,13 @@ typedef union _MI_IDR2_t { u16 value; struct { #ifdef _BIT_FIELDS_HTOL - u16 ieee_address:6; // 111100 default(bits 10-15) - u16 model_no:6; // 000001 default(bits 4-9) - u16 rev_no:4; // 0010 default(bits 0-3) + u16 ieee_address:6; /* 111100 default(bits 10-15) */ + u16 model_no:6; /* 000001 default(bits 4-9) */ + u16 rev_no:4; /* 0010 default(bits 0-3) */ #else - u16 rev_no:4; // 0010 default(bits 0-3) - u16 model_no:6; // 000001 default(bits 4-9) - u16 ieee_address:6; // 111100 default(bits 10-15) + u16 rev_no:4; /* 0010 default(bits 0-3) */ + u16 model_no:6; /* 000001 default(bits 4-9) */ + u16 ieee_address:6; /* 111100 default(bits 10-15) */ #endif } bits; } MI_IDR2_t, *PMI_IDR2_t; @@ -235,31 +232,31 @@ typedef union _MI_ANAR_t { u16 value; struct { #ifdef _BIT_FIELDS_HTOL - u16 np_indication:1; // bit 15 - u16 res2:1; // bit 14 - u16 remote_fault:1; // bit 13 - u16 res1:1; // bit 12 - u16 cap_asmpause:1; // bit 11 - u16 cap_pause:1; // bit 10 - u16 cap_100T4:1; // bit 9 - u16 cap_100fdx:1; // bit 8 - u16 cap_100hdx:1; // bit 7 - u16 cap_10fdx:1; // bit 6 - u16 cap_10hdx:1; // bit 5 - u16 selector:5; // bits 0-4 + u16 np_indication:1; /* bit 15 */ + u16 res2:1; /* bit 14 */ + u16 remote_fault:1; /* bit 13 */ + u16 res1:1; /* bit 12 */ + u16 cap_asmpause:1; /* bit 11 */ + u16 cap_pause:1; /* bit 10 */ + u16 cap_100T4:1; /* bit 9 */ + u16 cap_100fdx:1; /* bit 8 */ + u16 cap_100hdx:1; /* bit 7 */ + u16 cap_10fdx:1; /* bit 6 */ + u16 cap_10hdx:1; /* bit 5 */ + u16 selector:5; /* bits 0-4 */ #else - u16 selector:5; // bits 0-4 - u16 cap_10hdx:1; // bit 5 - u16 cap_10fdx:1; // bit 6 - u16 cap_100hdx:1; // bit 7 - u16 cap_100fdx:1; // bit 8 - u16 cap_100T4:1; // bit 9 - u16 cap_pause:1; // bit 10 - u16 cap_asmpause:1; // bit 11 - u16 res1:1; // bit 12 - u16 remote_fault:1; // bit 13 - u16 res2:1; // bit 14 - u16 np_indication:1; // bit 15 + u16 selector:5; /* bits 0-4 */ + u16 cap_10hdx:1; /* bit 5 */ + u16 cap_10fdx:1; /* bit 6 */ + u16 cap_100hdx:1; /* bit 7 */ + u16 cap_100fdx:1; /* bit 8 */ + u16 cap_100T4:1; /* bit 9 */ + u16 cap_pause:1; /* bit 10 */ + u16 cap_asmpause:1; /* bit 11 */ + u16 res1:1; /* bit 12 */ + u16 remote_fault:1; /* bit 13 */ + u16 res2:1; /* bit 14 */ + u16 np_indication:1; /* bit 15 */ #endif } bits; } MI_ANAR_t, *PMI_ANAR_t; @@ -269,31 +266,31 @@ typedef struct _MI_ANLPAR_t { u16 value; struct { #ifdef _BIT_FIELDS_HTOL - u16 np_indication:1; // bit 15 - u16 acknowledge:1; // bit 14 - u16 remote_fault:1; // bit 13 - u16 res1:1; // bit 12 - u16 cap_asmpause:1; // bit 11 - u16 cap_pause:1; // bit 10 - u16 cap_100T4:1; // bit 9 - u16 cap_100fdx:1; // bit 8 - u16 cap_100hdx:1; // bit 7 - u16 cap_10fdx:1; // bit 6 - u16 cap_10hdx:1; // bit 5 - u16 selector:5; // bits 0-4 + u16 np_indication:1; /* bit 15 */ + u16 acknowledge:1; /* bit 14 */ + u16 remote_fault:1; /* bit 13 */ + u16 res1:1; /* bit 12 */ + u16 cap_asmpause:1; /* bit 11 */ + u16 cap_pause:1; /* bit 10 */ + u16 cap_100T4:1; /* bit 9 */ + u16 cap_100fdx:1; /* bit 8 */ + u16 cap_100hdx:1; /* bit 7 */ + u16 cap_10fdx:1; /* bit 6 */ + u16 cap_10hdx:1; /* bit 5 */ + u16 selector:5; /* bits 0-4 */ #else - u16 selector:5; // bits 0-4 - u16 cap_10hdx:1; // bit 5 - u16 cap_10fdx:1; // bit 6 - u16 cap_100hdx:1; // bit 7 - u16 cap_100fdx:1; // bit 8 - u16 cap_100T4:1; // bit 9 - u16 cap_pause:1; // bit 10 - u16 cap_asmpause:1; // bit 11 - u16 res1:1; // bit 12 - u16 remote_fault:1; // bit 13 - u16 acknowledge:1; // bit 14 - u16 np_indication:1; // bit 15 + u16 selector:5; /* bits 0-4 */ + u16 cap_10hdx:1; /* bit 5 */ + u16 cap_10fdx:1; /* bit 6 */ + u16 cap_100hdx:1; /* bit 7 */ + u16 cap_100fdx:1; /* bit 8 */ + u16 cap_100T4:1; /* bit 9 */ + u16 cap_pause:1; /* bit 10 */ + u16 cap_asmpause:1; /* bit 11 */ + u16 res1:1; /* bit 12 */ + u16 remote_fault:1; /* bit 13 */ + u16 acknowledge:1; /* bit 14 */ + u16 np_indication:1; /* bit 15 */ #endif } bits; } MI_ANLPAR_t, *PMI_ANLPAR_t; @@ -303,19 +300,19 @@ typedef union _MI_ANER_t { u16 value; struct { #ifdef _BIT_FIELDS_HTOL - u16 res:11; // bits 5-15 - u16 pdf:1; // bit 4 - u16 lp_np_able:1; // bit 3 - u16 np_able:1; // bit 2 - u16 page_rx:1; // bit 1 - u16 lp_an_able:1; // bit 0 + u16 res:11; /* bits 5-15 */ + u16 pdf:1; /* bit 4 */ + u16 lp_np_able:1; /* bit 3 */ + u16 np_able:1; /* bit 2 */ + u16 page_rx:1; /* bit 1 */ + u16 lp_an_able:1; /* bit 0 */ #else - u16 lp_an_able:1; // bit 0 - u16 page_rx:1; // bit 1 - u16 np_able:1; // bit 2 - u16 lp_np_able:1; // bit 3 - u16 pdf:1; // bit 4 - u16 res:11; // bits 5-15 + u16 lp_an_able:1; /* bit 0 */ + u16 page_rx:1; /* bit 1 */ + u16 np_able:1; /* bit 2 */ + u16 lp_np_able:1; /* bit 3 */ + u16 pdf:1; /* bit 4 */ + u16 res:11; /* bits 5-15 */ #endif } bits; } MI_ANER_t, *PMI_ANER_t; @@ -325,19 +322,19 @@ typedef union _MI_ANNPTR_t { u16 value; struct { #ifdef _BIT_FIELDS_HTOL - u16 np:1; // bit 15 - u16 res1:1; // bit 14 - u16 msg_page:1; // bit 13 - u16 ack2:1; // bit 12 - u16 toggle:1; // bit 11 - u16 msg:11; // bits 0-10 + u16 np:1; /* bit 15 */ + u16 res1:1; /* bit 14 */ + u16 msg_page:1; /* bit 13 */ + u16 ack2:1; /* bit 12 */ + u16 toggle:1; /* bit 11 */ + u16 msg:11; /* bits 0-10 */ #else - u16 msg:11; // bits 0-10 - u16 toggle:1; // bit 11 - u16 ack2:1; // bit 12 - u16 msg_page:1; // bit 13 - u16 res1:1; // bit 14 - u16 np:1; // bit 15 + u16 msg:11; /* bits 0-10 */ + u16 toggle:1; /* bit 11 */ + u16 ack2:1; /* bit 12 */ + u16 msg_page:1; /* bit 13 */ + u16 res1:1; /* bit 14 */ + u16 np:1; /* bit 15 */ #endif } bits; } MI_ANNPTR_t, *PMI_ANNPTR_t; @@ -347,19 +344,19 @@ typedef union _MI_LPNPR_t { u16 value; struct { #ifdef _BIT_FIELDS_HTOL - u16 np:1; // bit 15 - u16 ack:1; // bit 14 - u16 msg_page:1; // bit 13 - u16 ack2:1; // bit 12 - u16 toggle:1; // bit 11 - u16 msg:11; // bits 0-10 + u16 np:1; /* bit 15 */ + u16 ack:1; /* bit 14 */ + u16 msg_page:1; /* bit 13 */ + u16 ack2:1; /* bit 12 */ + u16 toggle:1; /* bit 11 */ + u16 msg:11; /* bits 0-10 */ #else - u16 msg:11; // bits 0-10 - u16 toggle:1; // bit 11 - u16 ack2:1; // bit 12 - u16 msg_page:1; // bit 13 - u16 ack:1; // bit 14 - u16 np:1; // bit 15 + u16 msg:11; /* bits 0-10 */ + u16 toggle:1; /* bit 11 */ + u16 ack2:1; /* bit 12 */ + u16 msg_page:1; /* bit 13 */ + u16 ack:1; /* bit 14 */ + u16 np:1; /* bit 15 */ #endif } bits; } MI_LPNPR_t, *PMI_LPNPR_t; @@ -369,21 +366,21 @@ typedef union _MI_GCR_t { u16 value; struct { #ifdef _BIT_FIELDS_HTOL - u16 test_mode:3; // bits 13-15 - u16 ms_config_en:1; // bit 12 - u16 ms_value:1; // bit 11 - u16 port_type:1; // bit 10 - u16 link_1000fdx:1; // bit 9 - u16 link_1000hdx:1; // bit 8 - u16 res:8; // bit 0-7 + u16 test_mode:3; /* bits 13-15 */ + u16 ms_config_en:1; /* bit 12 */ + u16 ms_value:1; /* bit 11 */ + u16 port_type:1; /* bit 10 */ + u16 link_1000fdx:1; /* bit 9 */ + u16 link_1000hdx:1; /* bit 8 */ + u16 res:8; /* bit 0-7 */ #else - u16 res:8; // bit 0-7 - u16 link_1000hdx:1; // bit 8 - u16 link_1000fdx:1; // bit 9 - u16 port_type:1; // bit 10 - u16 ms_value:1; // bit 11 - u16 ms_config_en:1; // bit 12 - u16 test_mode:3; // bits 13-15 + u16 res:8; /* bit 0-7 */ + u16 link_1000hdx:1; /* bit 8 */ + u16 link_1000fdx:1; /* bit 9 */ + u16 port_type:1; /* bit 10 */ + u16 ms_value:1; /* bit 11 */ + u16 ms_config_en:1; /* bit 12 */ + u16 test_mode:3; /* bits 13-15 */ #endif } bits; } MI_GCR_t, *PMI_GCR_t; @@ -393,23 +390,23 @@ typedef union _MI_GSR_t { u16 value; struct { #ifdef _BIT_FIELDS_HTOL - u16 ms_config_fault:1; // bit 15 - u16 ms_resolve:1; // bit 14 - u16 local_rx_status:1; // bit 13 - u16 remote_rx_status:1; // bit 12 - u16 link_1000fdx:1; // bit 11 - u16 link_1000hdx:1; // bit 10 - u16 res:2; // bits 8-9 - u16 idle_err_cnt:8; // bits 0-7 + u16 ms_config_fault:1; /* bit 15 */ + u16 ms_resolve:1; /* bit 14 */ + u16 local_rx_status:1; /* bit 13 */ + u16 remote_rx_status:1; /* bit 12 */ + u16 link_1000fdx:1; /* bit 11 */ + u16 link_1000hdx:1; /* bit 10 */ + u16 res:2; /* bits 8-9 */ + u16 idle_err_cnt:8; /* bits 0-7 */ #else - u16 idle_err_cnt:8; // bits 0-7 - u16 res:2; // bits 8-9 - u16 link_1000hdx:1; // bit 10 - u16 link_1000fdx:1; // bit 11 - u16 remote_rx_status:1; // bit 12 - u16 local_rx_status:1; // bit 13 - u16 ms_resolve:1; // bit 14 - u16 ms_config_fault:1; // bit 15 + u16 idle_err_cnt:8; /* bits 0-7 */ + u16 res:2; /* bits 8-9 */ + u16 link_1000hdx:1; /* bit 10 */ + u16 link_1000fdx:1; /* bit 11 */ + u16 remote_rx_status:1; /* bit 12 */ + u16 local_rx_status:1; /* bit 13 */ + u16 ms_resolve:1; /* bit 14 */ + u16 ms_config_fault:1; /* bit 15 */ #endif } bits; } MI_GSR_t, *PMI_GSR_t; @@ -419,39 +416,39 @@ typedef union _MI_RES_t { u16 value; struct { #ifdef _BIT_FIELDS_HTOL - u16 res15:1; // bit 15 - u16 res14:1; // bit 14 - u16 res13:1; // bit 13 - u16 res12:1; // bit 12 - u16 res11:1; // bit 11 - u16 res10:1; // bit 10 - u16 res9:1; // bit 9 - u16 res8:1; // bit 8 - u16 res7:1; // bit 7 - u16 res6:1; // bit 6 - u16 res5:1; // bit 5 - u16 res4:1; // bit 4 - u16 res3:1; // bit 3 - u16 res2:1; // bit 2 - u16 res1:1; // bit 1 - u16 res0:1; // bit 0 + u16 res15:1; /* bit 15 */ + u16 res14:1; /* bit 14 */ + u16 res13:1; /* bit 13 */ + u16 res12:1; /* bit 12 */ + u16 res11:1; /* bit 11 */ + u16 res10:1; /* bit 10 */ + u16 res9:1; /* bit 9 */ + u16 res8:1; /* bit 8 */ + u16 res7:1; /* bit 7 */ + u16 res6:1; /* bit 6 */ + u16 res5:1; /* bit 5 */ + u16 res4:1; /* bit 4 */ + u16 res3:1; /* bit 3 */ + u16 res2:1; /* bit 2 */ + u16 res1:1; /* bit 1 */ + u16 res0:1; /* bit 0 */ #else - u16 res0:1; // bit 0 - u16 res1:1; // bit 1 - u16 res2:1; // bit 2 - u16 res3:1; // bit 3 - u16 res4:1; // bit 4 - u16 res5:1; // bit 5 - u16 res6:1; // bit 6 - u16 res7:1; // bit 7 - u16 res8:1; // bit 8 - u16 res9:1; // bit 9 - u16 res10:1; // bit 10 - u16 res11:1; // bit 11 - u16 res12:1; // bit 12 - u16 res13:1; // bit 13 - u16 res14:1; // bit 14 - u16 res15:1; // bit 15 + u16 res0:1; /* bit 0 */ + u16 res1:1; /* bit 1 */ + u16 res2:1; /* bit 2 */ + u16 res3:1; /* bit 3 */ + u16 res4:1; /* bit 4 */ + u16 res5:1; /* bit 5 */ + u16 res6:1; /* bit 6 */ + u16 res7:1; /* bit 7 */ + u16 res8:1; /* bit 8 */ + u16 res9:1; /* bit 9 */ + u16 res10:1; /* bit 10 */ + u16 res11:1; /* bit 11 */ + u16 res12:1; /* bit 12 */ + u16 res13:1; /* bit 13 */ + u16 res14:1; /* bit 14 */ + u16 res15:1; /* bit 15 */ #endif } bits; } MI_RES_t, *PMI_RES_t; @@ -461,17 +458,17 @@ typedef union _MI_ESR_t { u16 value; struct { #ifdef _BIT_FIELDS_HTOL - u16 link_1000Xfdx:1; // bit 15 - u16 link_1000Xhdx:1; // bit 14 - u16 link_1000fdx:1; // bit 13 - u16 link_1000hdx:1; // bit 12 - u16 res:12; // bit 0-11 + u16 link_1000Xfdx:1; /* bit 15 */ + u16 link_1000Xhdx:1; /* bit 14 */ + u16 link_1000fdx:1; /* bit 13 */ + u16 link_1000hdx:1; /* bit 12 */ + u16 res:12; /* bit 0-11 */ #else - u16 res:12; // bit 0-11 - u16 link_1000hdx:1; // bit 12 - u16 link_1000fdx:1; // bit 13 - u16 link_1000Xhdx:1; // bit 14 - u16 link_1000Xfdx:1; // bit 15 + u16 res:12; /* bit 0-11 */ + u16 link_1000hdx:1; /* bit 12 */ + u16 link_1000fdx:1; /* bit 13 */ + u16 link_1000Xhdx:1; /* bit 14 */ + u16 link_1000Xfdx:1; /* bit 15 */ #endif } bits; } MI_ESR_t, *PMI_ESR_t; @@ -483,21 +480,21 @@ typedef union _MI_LCR_t { u16 value; struct { #ifdef _BIT_FIELDS_HTOL - u16 mii_en:1; // bit 15 - u16 pcs_en:1; // bit 14 - u16 pmd_en:1; // bit 13 - u16 all_digital_en:1; // bit 12 - u16 replica_en:1; // bit 11 - u16 line_driver_en:1; // bit 10 - u16 res:10; // bit 0-9 + u16 mii_en:1; /* bit 15 */ + u16 pcs_en:1; /* bit 14 */ + u16 pmd_en:1; /* bit 13 */ + u16 all_digital_en:1; /* bit 12 */ + u16 replica_en:1; /* bit 11 */ + u16 line_driver_en:1; /* bit 10 */ + u16 res:10; /* bit 0-9 */ #else - u16 res:10; // bit 0-9 - u16 line_driver_en:1; // bit 10 - u16 replica_en:1; // bit 11 - u16 all_digital_en:1; // bit 12 - u16 pmd_en:1; // bit 13 - u16 pcs_en:1; // bit 14 - u16 mii_en:1; // bit 15 + u16 res:10; /* bit 0-9 */ + u16 line_driver_en:1; /* bit 10 */ + u16 replica_en:1; /* bit 11 */ + u16 all_digital_en:1; /* bit 12 */ + u16 pmd_en:1; /* bit 13 */ + u16 pcs_en:1; /* bit 14 */ + u16 mii_en:1; /* bit 15 */ #endif } bits; } MI_LCR_t, *PMI_LCR_t; @@ -509,19 +506,19 @@ typedef union _MI_MICR_t { u16 value; struct { #ifdef _BIT_FIELDS_HTOL - u16 res1:5; // bits 11-15 - u16 mi_error_count:7; // bits 4-10 - u16 res2:1; // bit 3 - u16 ignore_10g_fr:1; // bit 2 - u16 res3:1; // bit 1 - u16 preamble_supress_en:1; // bit 0 + u16 res1:5; /* bits 11-15 */ + u16 mi_error_count:7; /* bits 4-10 */ + u16 res2:1; /* bit 3 */ + u16 ignore_10g_fr:1; /* bit 2 */ + u16 res3:1; /* bit 1 */ + u16 preamble_supress_en:1; /* bit 0 */ #else - u16 preamble_supress_en:1; // bit 0 - u16 res3:1; // bit 1 - u16 ignore_10g_fr:1; // bit 2 - u16 res2:1; // bit 3 - u16 mi_error_count:7; // bits 4-10 - u16 res1:5; // bits 11-15 + u16 preamble_supress_en:1; /* bit 0 */ + u16 res3:1; /* bit 1 */ + u16 ignore_10g_fr:1; /* bit 2 */ + u16 res2:1; /* bit 3 */ + u16 mi_error_count:7; /* bits 4-10 */ + u16 res1:5; /* bits 11-15 */ #endif } bits; } MI_MICR_t, *PMI_MICR_t; @@ -531,31 +528,31 @@ typedef union _MI_PHY_CONFIG_t { u16 value; struct { #ifdef _BIT_FIELDS_HTOL - u16 crs_tx_en:1; // bit 15 - u16 res1:1; // bit 14 - u16 tx_fifo_depth:2; // bits 12-13 - u16 speed_downshift:2; // bits 10-11 - u16 pbi_detect:1; // bit 9 - u16 tbi_rate:1; // bit 8 - u16 alternate_np:1; // bit 7 - u16 group_mdio_en:1; // bit 6 - u16 tx_clock_en:1; // bit 5 - u16 sys_clock_en:1; // bit 4 - u16 res2:1; // bit 3 - u16 mac_if_mode:3; // bits 0-2 + u16 crs_tx_en:1; /* bit 15 */ + u16 res1:1; /* bit 14 */ + u16 tx_fifo_depth:2; /* bits 12-13 */ + u16 speed_downshift:2; /* bits 10-11 */ + u16 pbi_detect:1; /* bit 9 */ + u16 tbi_rate:1; /* bit 8 */ + u16 alternate_np:1; /* bit 7 */ + u16 group_mdio_en:1; /* bit 6 */ + u16 tx_clock_en:1; /* bit 5 */ + u16 sys_clock_en:1; /* bit 4 */ + u16 res2:1; /* bit 3 */ + u16 mac_if_mode:3; /* bits 0-2 */ #else - u16 mac_if_mode:3; // bits 0-2 - u16 res2:1; // bit 3 - u16 sys_clock_en:1; // bit 4 - u16 tx_clock_en:1; // bit 5 - u16 group_mdio_en:1; // bit 6 - u16 alternate_np:1; // bit 7 - u16 tbi_rate:1; // bit 8 - u16 pbi_detect:1; // bit 9 - u16 speed_downshift:2; // bits 10-11 - u16 tx_fifo_depth:2; // bits 12-13 - u16 res1:1; // bit 14 - u16 crs_tx_en:1; // bit 15 + u16 mac_if_mode:3; /* bits 0-2 */ + u16 res2:1; /* bit 3 */ + u16 sys_clock_en:1; /* bit 4 */ + u16 tx_clock_en:1; /* bit 5 */ + u16 group_mdio_en:1; /* bit 6 */ + u16 alternate_np:1; /* bit 7 */ + u16 tbi_rate:1; /* bit 8 */ + u16 pbi_detect:1; /* bit 9 */ + u16 speed_downshift:2; /* bits 10-11 */ + u16 tx_fifo_depth:2; /* bits 12-13 */ + u16 res1:1; /* bit 14 */ + u16 crs_tx_en:1; /* bit 15 */ #endif } bits; } MI_PHY_CONFIG_t, *PMI_PHY_CONFIG_t; @@ -565,29 +562,29 @@ typedef union _MI_PHY_CONTROL_t { u16 value; struct { #ifdef _BIT_FIELDS_HTOL - u16 res1:1; // bit 15 - u16 tdr_en:1; // bit 14 - u16 res2:1; // bit 13 - u16 downshift_attempts:2; // bits 11-12 - u16 res3:5; // bit 6-10 - u16 jabber_10baseT:1; // bit 5 - u16 sqe_10baseT:1; // bit 4 - u16 tp_loopback_10baseT:1; // bit 3 - u16 preamble_gen_en:1; // bit 2 - u16 res4:1; // bit 1 - u16 force_int:1; // bit 0 + u16 res1:1; /* bit 15 */ + u16 tdr_en:1; /* bit 14 */ + u16 res2:1; /* bit 13 */ + u16 downshift_attempts:2; /* bits 11-12 */ + u16 res3:5; /* bit 6-10 */ + u16 jabber_10baseT:1; /* bit 5 */ + u16 sqe_10baseT:1; /* bit 4 */ + u16 tp_loopback_10baseT:1; /* bit 3 */ + u16 preamble_gen_en:1; /* bit 2 */ + u16 res4:1; /* bit 1 */ + u16 force_int:1; /* bit 0 */ #else - u16 force_int:1; // bit 0 - u16 res4:1; // bit 1 - u16 preamble_gen_en:1; // bit 2 - u16 tp_loopback_10baseT:1; // bit 3 - u16 sqe_10baseT:1; // bit 4 - u16 jabber_10baseT:1; // bit 5 - u16 res3:5; // bit 6-10 - u16 downshift_attempts:2; // bits 11-12 - u16 res2:1; // bit 13 - u16 tdr_en:1; // bit 14 - u16 res1:1; // bit 15 + u16 force_int:1; /* bit 0 */ + u16 res4:1; /* bit 1 */ + u16 preamble_gen_en:1; /* bit 2 */ + u16 tp_loopback_10baseT:1; /* bit 3 */ + u16 sqe_10baseT:1; /* bit 4 */ + u16 jabber_10baseT:1; /* bit 5 */ + u16 res3:5; /* bit 6-10 */ + u16 downshift_attempts:2; /* bits 11-12 */ + u16 res2:1; /* bit 13 */ + u16 tdr_en:1; /* bit 14 */ + u16 res1:1; /* bit 15 */ #endif } bits; } MI_PHY_CONTROL_t, *PMI_PHY_CONTROL_t; @@ -597,29 +594,29 @@ typedef union _MI_IMR_t { u16 value; struct { #ifdef _BIT_FIELDS_HTOL - u16 res1:6; // bits 10-15 - u16 mdio_sync_lost:1; // bit 9 - u16 autoneg_status:1; // bit 8 - u16 hi_bit_err:1; // bit 7 - u16 np_rx:1; // bit 6 - u16 err_counter_full:1; // bit 5 - u16 fifo_over_underflow:1; // bit 4 - u16 rx_status:1; // bit 3 - u16 link_status:1; // bit 2 - u16 automatic_speed:1; // bit 1 - u16 int_en:1; // bit 0 + u16 res1:6; /* bits 10-15 */ + u16 mdio_sync_lost:1; /* bit 9 */ + u16 autoneg_status:1; /* bit 8 */ + u16 hi_bit_err:1; /* bit 7 */ + u16 np_rx:1; /* bit 6 */ + u16 err_counter_full:1; /* bit 5 */ + u16 fifo_over_underflow:1; /* bit 4 */ + u16 rx_status:1; /* bit 3 */ + u16 link_status:1; /* bit 2 */ + u16 automatic_speed:1; /* bit 1 */ + u16 int_en:1; /* bit 0 */ #else - u16 int_en:1; // bit 0 - u16 automatic_speed:1; // bit 1 - u16 link_status:1; // bit 2 - u16 rx_status:1; // bit 3 - u16 fifo_over_underflow:1; // bit 4 - u16 err_counter_full:1; // bit 5 - u16 np_rx:1; // bit 6 - u16 hi_bit_err:1; // bit 7 - u16 autoneg_status:1; // bit 8 - u16 mdio_sync_lost:1; // bit 9 - u16 res1:6; // bits 10-15 + u16 int_en:1; /* bit 0 */ + u16 automatic_speed:1; /* bit 1 */ + u16 link_status:1; /* bit 2 */ + u16 rx_status:1; /* bit 3 */ + u16 fifo_over_underflow:1; /* bit 4 */ + u16 err_counter_full:1; /* bit 5 */ + u16 np_rx:1; /* bit 6 */ + u16 hi_bit_err:1; /* bit 7 */ + u16 autoneg_status:1; /* bit 8 */ + u16 mdio_sync_lost:1; /* bit 9 */ + u16 res1:6; /* bits 10-15 */ #endif } bits; } MI_IMR_t, *PMI_IMR_t; @@ -629,29 +626,29 @@ typedef union _MI_ISR_t { u16 value; struct { #ifdef _BIT_FIELDS_HTOL - u16 res1:6; // bits 10-15 - u16 mdio_sync_lost:1; // bit 9 - u16 autoneg_status:1; // bit 8 - u16 hi_bit_err:1; // bit 7 - u16 np_rx:1; // bit 6 - u16 err_counter_full:1; // bit 5 - u16 fifo_over_underflow:1; // bit 4 - u16 rx_status:1; // bit 3 - u16 link_status:1; // bit 2 - u16 automatic_speed:1; // bit 1 - u16 int_en:1; // bit 0 + u16 res1:6; /* bits 10-15 */ + u16 mdio_sync_lost:1; /* bit 9 */ + u16 autoneg_status:1; /* bit 8 */ + u16 hi_bit_err:1; /* bit 7 */ + u16 np_rx:1; /* bit 6 */ + u16 err_counter_full:1; /* bit 5 */ + u16 fifo_over_underflow:1; /* bit 4 */ + u16 rx_status:1; /* bit 3 */ + u16 link_status:1; /* bit 2 */ + u16 automatic_speed:1; /* bit 1 */ + u16 int_en:1; /* bit 0 */ #else - u16 int_en:1; // bit 0 - u16 automatic_speed:1; // bit 1 - u16 link_status:1; // bit 2 - u16 rx_status:1; // bit 3 - u16 fifo_over_underflow:1; // bit 4 - u16 err_counter_full:1; // bit 5 - u16 np_rx:1; // bit 6 - u16 hi_bit_err:1; // bit 7 - u16 autoneg_status:1; // bit 8 - u16 mdio_sync_lost:1; // bit 9 - u16 res1:6; // bits 10-15 + u16 int_en:1; /* bit 0 */ + u16 automatic_speed:1; /* bit 1 */ + u16 link_status:1; /* bit 2 */ + u16 rx_status:1; /* bit 3 */ + u16 fifo_over_underflow:1; /* bit 4 */ + u16 err_counter_full:1; /* bit 5 */ + u16 np_rx:1; /* bit 6 */ + u16 hi_bit_err:1; /* bit 7 */ + u16 autoneg_status:1; /* bit 8 */ + u16 mdio_sync_lost:1; /* bit 9 */ + u16 res1:6; /* bits 10-15 */ #endif } bits; } MI_ISR_t, *PMI_ISR_t; @@ -661,35 +658,35 @@ typedef union _MI_PSR_t { u16 value; struct { #ifdef _BIT_FIELDS_HTOL - u16 res1:1; // bit 15 - u16 autoneg_fault:2; // bit 13-14 - u16 autoneg_status:1; // bit 12 - u16 mdi_x_status:1; // bit 11 - u16 polarity_status:1; // bit 10 - u16 speed_status:2; // bits 8-9 - u16 duplex_status:1; // bit 7 - u16 link_status:1; // bit 6 - u16 tx_status:1; // bit 5 - u16 rx_status:1; // bit 4 - u16 collision_status:1; // bit 3 - u16 autoneg_en:1; // bit 2 - u16 pause_en:1; // bit 1 - u16 asymmetric_dir:1; // bit 0 + u16 res1:1; /* bit 15 */ + u16 autoneg_fault:2; /* bit 13-14 */ + u16 autoneg_status:1; /* bit 12 */ + u16 mdi_x_status:1; /* bit 11 */ + u16 polarity_status:1; /* bit 10 */ + u16 speed_status:2; /* bits 8-9 */ + u16 duplex_status:1; /* bit 7 */ + u16 link_status:1; /* bit 6 */ + u16 tx_status:1; /* bit 5 */ + u16 rx_status:1; /* bit 4 */ + u16 collision_status:1; /* bit 3 */ + u16 autoneg_en:1; /* bit 2 */ + u16 pause_en:1; /* bit 1 */ + u16 asymmetric_dir:1; /* bit 0 */ #else - u16 asymmetric_dir:1; // bit 0 - u16 pause_en:1; // bit 1 - u16 autoneg_en:1; // bit 2 - u16 collision_status:1; // bit 3 - u16 rx_status:1; // bit 4 - u16 tx_status:1; // bit 5 - u16 link_status:1; // bit 6 - u16 duplex_status:1; // bit 7 - u16 speed_status:2; // bits 8-9 - u16 polarity_status:1; // bit 10 - u16 mdi_x_status:1; // bit 11 - u16 autoneg_status:1; // bit 12 - u16 autoneg_fault:2; // bit 13-14 - u16 res1:1; // bit 15 + u16 asymmetric_dir:1; /* bit 0 */ + u16 pause_en:1; /* bit 1 */ + u16 autoneg_en:1; /* bit 2 */ + u16 collision_status:1; /* bit 3 */ + u16 rx_status:1; /* bit 4 */ + u16 tx_status:1; /* bit 5 */ + u16 link_status:1; /* bit 6 */ + u16 duplex_status:1; /* bit 7 */ + u16 speed_status:2; /* bits 8-9 */ + u16 polarity_status:1; /* bit 10 */ + u16 mdi_x_status:1; /* bit 11 */ + u16 autoneg_status:1; /* bit 12 */ + u16 autoneg_fault:2; /* bit 13-14 */ + u16 res1:1; /* bit 15 */ #endif } bits; } MI_PSR_t, *PMI_PSR_t; @@ -699,25 +696,25 @@ typedef union _MI_LCR1_t { u16 value; struct { #ifdef _BIT_FIELDS_HTOL - u16 res1:2; // bits 14-15 - u16 led_dup_indicate:2; // bits 12-13 - u16 led_10baseT:2; // bits 10-11 - u16 led_collision:2; // bits 8-9 - u16 res2:2; // bits 6-7 - u16 res3:2; // bits 4-5 - u16 pulse_dur:2; // bits 2-3 - u16 pulse_stretch1:1; // bit 1 - u16 pulse_stretch0:1; // bit 0 + u16 res1:2; /* bits 14-15 */ + u16 led_dup_indicate:2; /* bits 12-13 */ + u16 led_10baseT:2; /* bits 10-11 */ + u16 led_collision:2; /* bits 8-9 */ + u16 res2:2; /* bits 6-7 */ + u16 res3:2; /* bits 4-5 */ + u16 pulse_dur:2; /* bits 2-3 */ + u16 pulse_stretch1:1; /* bit 1 */ + u16 pulse_stretch0:1; /* bit 0 */ #else - u16 pulse_stretch0:1; // bit 0 - u16 pulse_stretch1:1; // bit 1 - u16 pulse_dur:2; // bits 2-3 - u16 res3:2; // bits 4-5 - u16 res2:2; // bits 6-7 - u16 led_collision:2; // bits 8-9 - u16 led_10baseT:2; // bits 10-11 - u16 led_dup_indicate:2; // bits 12-13 - u16 res1:2; // bits 14-15 + u16 pulse_stretch0:1; /* bit 0 */ + u16 pulse_stretch1:1; /* bit 1 */ + u16 pulse_dur:2; /* bits 2-3 */ + u16 res3:2; /* bits 4-5 */ + u16 res2:2; /* bits 6-7 */ + u16 led_collision:2; /* bits 8-9 */ + u16 led_10baseT:2; /* bits 10-11 */ + u16 led_dup_indicate:2; /* bits 12-13 */ + u16 res1:2; /* bits 14-15 */ #endif } bits; } MI_LCR1_t, *PMI_LCR1_t; @@ -727,43 +724,21 @@ typedef union _MI_LCR2_t { u16 value; struct { #ifdef _BIT_FIELDS_HTOL - u16 led_link:4; // bits 12-15 - u16 led_tx_rx:4; // bits 8-11 - u16 led_100BaseTX:4; // bits 4-7 - u16 led_1000BaseT:4; // bits 0-3 + u16 led_link:4; /* bits 12-15 */ + u16 led_tx_rx:4; /* bits 8-11 */ + u16 led_100BaseTX:4; /* bits 4-7 */ + u16 led_1000BaseT:4; /* bits 0-3 */ #else - u16 led_1000BaseT:4; // bits 0-3 - u16 led_100BaseTX:4; // bits 4-7 - u16 led_tx_rx:4; // bits 8-11 - u16 led_link:4; // bits 12-15 + u16 led_1000BaseT:4; /* bits 0-3 */ + u16 led_100BaseTX:4; /* bits 4-7 */ + u16 led_tx_rx:4; /* bits 8-11 */ + u16 led_link:4; /* bits 12-15 */ #endif } bits; } MI_LCR2_t, *PMI_LCR2_t; /* MI Register 29 - 31: Reserved Reg(0x1D - 0x1E) */ -/* TruePHY headers */ -typedef struct _TRUEPHY_ACCESS_MI_REGS_ { - TRUEPHY_HANDLE hTruePhy; - int32_t nPhyId; - u8 bReadWrite; - u8 *pbyRegs; - u8 *pwData; - int32_t nRegCount; -} TRUEPHY_ACCESS_MI_REGS, *PTRUEPHY_ACCESS_MI_REGS; - -/* TruePHY headers */ -typedef struct _TAG_TPAL_ACCESS_MI_REGS_ { - u32 nPhyId; - u8 bReadWrite; - u32 nRegCount; - u16 Data[4096]; - u8 Regs[4096]; -} TPAL_ACCESS_MI_REGS, *PTPAL_ACCESS_MI_REGS; - - -typedef TRUEPHY_HANDLE TPAL_HANDLE; - /* Forward declaration of the private adapter structure */ struct et131x_adapter; @@ -802,41 +777,41 @@ void SetPhy_10BaseTHalfDuplex(struct et131x_adapter *adapter); /* Defines for PHY access routines */ -// Define bit operation flags +/* Define bit operation flags */ #define TRUEPHY_BIT_CLEAR 0 #define TRUEPHY_BIT_SET 1 #define TRUEPHY_BIT_READ 2 -// Define read/write operation flags +/* Define read/write operation flags */ #ifndef TRUEPHY_READ #define TRUEPHY_READ 0 #define TRUEPHY_WRITE 1 #define TRUEPHY_MASK 2 #endif -// Define speeds +/* Define speeds */ #define TRUEPHY_SPEED_10MBPS 0 #define TRUEPHY_SPEED_100MBPS 1 #define TRUEPHY_SPEED_1000MBPS 2 -// Define duplex modes +/* Define duplex modes */ #define TRUEPHY_DUPLEX_HALF 0 #define TRUEPHY_DUPLEX_FULL 1 -// Define master/slave configuration values +/* Define master/slave configuration values */ #define TRUEPHY_CFG_SLAVE 0 #define TRUEPHY_CFG_MASTER 1 -// Define MDI/MDI-X settings +/* Define MDI/MDI-X settings */ #define TRUEPHY_MDI 0 #define TRUEPHY_MDIX 1 #define TRUEPHY_AUTO_MDI_MDIX 2 -// Define 10Base-T link polarities +/* Define 10Base-T link polarities */ #define TRUEPHY_POLARITY_NORMAL 0 #define TRUEPHY_POLARITY_INVERTED 1 -// Define auto-negotiation results +/* Define auto-negotiation results */ #define TRUEPHY_ANEG_NOT_COMPLETE 0 #define TRUEPHY_ANEG_COMPLETE 1 #define TRUEPHY_ANEG_DISABLED 2 @@ -848,38 +823,38 @@ void SetPhy_10BaseTHalfDuplex(struct et131x_adapter *adapter); #define TRUEPHY_ADV_DUPLEX_BOTH \ (TRUEPHY_ADV_DUPLEX_FULL | TRUEPHY_ADV_DUPLEX_HALF) -#define PHY_CONTROL 0x00 //#define TRU_MI_CONTROL_REGISTER 0 -#define PHY_STATUS 0x01 //#define TRU_MI_STATUS_REGISTER 1 -#define PHY_ID_1 0x02 //#define TRU_MI_PHY_IDENTIFIER_1_REGISTER 2 -#define PHY_ID_2 0x03 //#define TRU_MI_PHY_IDENTIFIER_2_REGISTER 3 -#define PHY_AUTO_ADVERTISEMENT 0x04 //#define TRU_MI_ADVERTISEMENT_REGISTER 4 -#define PHY_AUTO_LINK_PARTNER 0x05 //#define TRU_MI_LINK_PARTNER_ABILITY_REGISTER 5 -#define PHY_AUTO_EXPANSION 0x06 //#define TRU_MI_EXPANSION_REGISTER 6 -#define PHY_AUTO_NEXT_PAGE_TX 0x07 //#define TRU_MI_NEXT_PAGE_TRANSMIT_REGISTER 7 -#define PHY_LINK_PARTNER_NEXT_PAGE 0x08 //#define TRU_MI_LINK_PARTNER_NEXT_PAGE_REGISTER 8 -#define PHY_1000_CONTROL 0x09 //#define TRU_MI_1000BASET_CONTROL_REGISTER 9 -#define PHY_1000_STATUS 0x0A //#define TRU_MI_1000BASET_STATUS_REGISTER 10 - -#define PHY_EXTENDED_STATUS 0x0F //#define TRU_MI_EXTENDED_STATUS_REGISTER 15 - -// some defines for modem registers that seem to be 'reserved' +#define PHY_CONTROL 0x00 /* #define TRU_MI_CONTROL_REGISTER 0 */ +#define PHY_STATUS 0x01 /* #define TRU_MI_STATUS_REGISTER 1 */ +#define PHY_ID_1 0x02 /* #define TRU_MI_PHY_IDENTIFIER_1_REGISTER 2 */ +#define PHY_ID_2 0x03 /* #define TRU_MI_PHY_IDENTIFIER_2_REGISTER 3 */ +#define PHY_AUTO_ADVERTISEMENT 0x04 /* #define TRU_MI_ADVERTISEMENT_REGISTER 4 */ +#define PHY_AUTO_LINK_PARTNER 0x05 /* #define TRU_MI_LINK_PARTNER_ABILITY_REGISTER 5 */ +#define PHY_AUTO_EXPANSION 0x06 /* #define TRU_MI_EXPANSION_REGISTER 6 */ +#define PHY_AUTO_NEXT_PAGE_TX 0x07 /* #define TRU_MI_NEXT_PAGE_TRANSMIT_REGISTER 7 */ +#define PHY_LINK_PARTNER_NEXT_PAGE 0x08 /* #define TRU_MI_LINK_PARTNER_NEXT_PAGE_REGISTER 8 */ +#define PHY_1000_CONTROL 0x09 /* #define TRU_MI_1000BASET_CONTROL_REGISTER 9 */ +#define PHY_1000_STATUS 0x0A /* #define TRU_MI_1000BASET_STATUS_REGISTER 10 */ + +#define PHY_EXTENDED_STATUS 0x0F /* #define TRU_MI_EXTENDED_STATUS_REGISTER 15 */ + +/* some defines for modem registers that seem to be 'reserved' */ #define PHY_INDEX_REG 0x10 #define PHY_DATA_REG 0x11 -#define PHY_MPHY_CONTROL_REG 0x12 //#define TRU_VMI_MPHY_CONTROL_REGISTER 18 - -#define PHY_LOOPBACK_CONTROL 0x13 //#define TRU_VMI_LOOPBACK_CONTROL_1_REGISTER 19 - //#define TRU_VMI_LOOPBACK_CONTROL_2_REGISTER 20 -#define PHY_REGISTER_MGMT_CONTROL 0x15 //#define TRU_VMI_MI_SEQ_CONTROL_REGISTER 21 -#define PHY_CONFIG 0x16 //#define TRU_VMI_CONFIGURATION_REGISTER 22 -#define PHY_PHY_CONTROL 0x17 //#define TRU_VMI_PHY_CONTROL_REGISTER 23 -#define PHY_INTERRUPT_MASK 0x18 //#define TRU_VMI_INTERRUPT_MASK_REGISTER 24 -#define PHY_INTERRUPT_STATUS 0x19 //#define TRU_VMI_INTERRUPT_STATUS_REGISTER 25 -#define PHY_PHY_STATUS 0x1A //#define TRU_VMI_PHY_STATUS_REGISTER 26 -#define PHY_LED_1 0x1B //#define TRU_VMI_LED_CONTROL_1_REGISTER 27 -#define PHY_LED_2 0x1C //#define TRU_VMI_LED_CONTROL_2_REGISTER 28 - //#define TRU_VMI_LINK_CONTROL_REGISTER 29 - //#define TRU_VMI_TIMING_CONTROL_REGISTER +#define PHY_MPHY_CONTROL_REG 0x12 /* #define TRU_VMI_MPHY_CONTROL_REGISTER 18 */ + +#define PHY_LOOPBACK_CONTROL 0x13 /* #define TRU_VMI_LOOPBACK_CONTROL_1_REGISTER 19 */ + /* #define TRU_VMI_LOOPBACK_CONTROL_2_REGISTER 20 */ +#define PHY_REGISTER_MGMT_CONTROL 0x15 /* #define TRU_VMI_MI_SEQ_CONTROL_REGISTER 21 */ +#define PHY_CONFIG 0x16 /* #define TRU_VMI_CONFIGURATION_REGISTER 22 */ +#define PHY_PHY_CONTROL 0x17 /* #define TRU_VMI_PHY_CONTROL_REGISTER 23 */ +#define PHY_INTERRUPT_MASK 0x18 /* #define TRU_VMI_INTERRUPT_MASK_REGISTER 24 */ +#define PHY_INTERRUPT_STATUS 0x19 /* #define TRU_VMI_INTERRUPT_STATUS_REGISTER 25 */ +#define PHY_PHY_STATUS 0x1A /* #define TRU_VMI_PHY_STATUS_REGISTER 26 */ +#define PHY_LED_1 0x1B /* #define TRU_VMI_LED_CONTROL_1_REGISTER 27 */ +#define PHY_LED_2 0x1C /* #define TRU_VMI_LED_CONTROL_2_REGISTER 28 */ + /* #define TRU_VMI_LINK_CONTROL_REGISTER 29 */ + /* #define TRU_VMI_TIMING_CONTROL_REGISTER */ /* Prototypes for PHY access routines */ void ET1310_PhyInit(struct et131x_adapter *adapter); @@ -895,12 +870,12 @@ void ET1310_PhyAdvertise100BaseT(struct et131x_adapter *adapter, void ET1310_PhyAdvertise10BaseT(struct et131x_adapter *adapter, u16 duplex); void ET1310_PhyLinkStatus(struct et131x_adapter *adapter, - u8 *ucLinkStatus, - u32 *uiAutoNeg, - u32 *uiLinkSpeed, - u32 *uiDuplexMode, - u32 *uiMdiMdix, - u32 *uiMasterSlave, u32 *uiPolarity); + u8 *Link_status, + u32 *autoneg, + u32 *linkspeed, + u32 *duplex_mode, + u32 *mdi_mdix, + u32 *masterslave, u32 *polarity); void ET1310_PhyAndOrReg(struct et131x_adapter *adapter, u16 regnum, u16 andMask, u16 orMask); void ET1310_PhyAccessMiBit(struct et131x_adapter *adapter, diff --git a/drivers/staging/et131x/et1310_pm.c b/drivers/staging/et131x/et1310_pm.c index 9539bc6..7d07723 100644 --- a/drivers/staging/et131x/et1310_pm.c +++ b/drivers/staging/et131x/et1310_pm.c @@ -2,7 +2,7 @@ * Agere Systems Inc. * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * http://www.agere.com * @@ -19,7 +19,7 @@ * software indicates your acceptance of these terms and conditions. If you do * not agree with these terms and conditions, do not use the software. * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * * Redistribution and use in source or binary forms, with or without @@ -40,7 +40,7 @@ * * Disclaimer * - * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN @@ -56,7 +56,6 @@ */ #include "et131x_version.h" -#include "et131x_debug.h" #include "et131x_defs.h" #include <linux/init.h> @@ -73,9 +72,9 @@ #include <linux/interrupt.h> #include <linux/in.h> #include <linux/delay.h> -#include <asm/io.h> +#include <linux/io.h> +#include <linux/bitops.h> #include <asm/system.h> -#include <asm/bitops.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> @@ -92,14 +91,9 @@ #include "et131x_adapter.h" #include "et131x_initpci.h" -/* Data for debugging facilities */ -#ifdef CONFIG_ET131X_DEBUG -extern dbg_info_t *et131x_dbginfo; -#endif /* CONFIG_ET131X_DEBUG */ - /** * EnablePhyComa - called when network cable is unplugged - * @pAdapter: pointer to our adapter structure + * @etdev: pointer to our adapter structure * * driver receive an phy status change interrupt while in D0 and check that * phy_status is down. @@ -117,91 +111,75 @@ extern dbg_info_t *et131x_dbginfo; * indicating linkup status, call the MPDisablePhyComa routine to * restore JAGCore and gigE PHY */ -void EnablePhyComa(struct et131x_adapter *pAdapter) +void EnablePhyComa(struct et131x_adapter *etdev) { - unsigned long lockflags; - PM_CSR_t GlobalPmCSR; - int32_t LoopCounter = 10; - - DBG_ENTER(et131x_dbginfo); + unsigned long flags; + u32 GlobalPmCSR; - GlobalPmCSR.value = readl(&pAdapter->CSRAddress->global.pm_csr.value); + GlobalPmCSR = readl(&etdev->regs->global.pm_csr); /* Save the GbE PHY speed and duplex modes. Need to restore this * when cable is plugged back in */ - pAdapter->PoMgmt.PowerDownSpeed = pAdapter->AiForceSpeed; - pAdapter->PoMgmt.PowerDownDuplex = pAdapter->AiForceDpx; + etdev->PoMgmt.PowerDownSpeed = etdev->AiForceSpeed; + etdev->PoMgmt.PowerDownDuplex = etdev->AiForceDpx; /* Stop sending packets. */ - spin_lock_irqsave(&pAdapter->SendHWLock, lockflags); - MP_SET_FLAG(pAdapter, fMP_ADAPTER_LOWER_POWER); - spin_unlock_irqrestore(&pAdapter->SendHWLock, lockflags); + spin_lock_irqsave(&etdev->SendHWLock, flags); + etdev->Flags |= fMP_ADAPTER_LOWER_POWER; + spin_unlock_irqrestore(&etdev->SendHWLock, flags); /* Wait for outstanding Receive packets */ - while ((MP_GET_RCV_REF(pAdapter) != 0) && (LoopCounter-- > 0)) { - mdelay(2); - } /* Gate off JAGCore 3 clock domains */ - GlobalPmCSR.bits.pm_sysclk_gate = 0; - GlobalPmCSR.bits.pm_txclk_gate = 0; - GlobalPmCSR.bits.pm_rxclk_gate = 0; - writel(GlobalPmCSR.value, &pAdapter->CSRAddress->global.pm_csr.value); + GlobalPmCSR &= ~ET_PMCSR_INIT; + writel(GlobalPmCSR, &etdev->regs->global.pm_csr); /* Program gigE PHY in to Coma mode */ - GlobalPmCSR.bits.pm_phy_sw_coma = 1; - writel(GlobalPmCSR.value, &pAdapter->CSRAddress->global.pm_csr.value); - - DBG_LEAVE(et131x_dbginfo); + GlobalPmCSR |= ET_PM_PHY_SW_COMA; + writel(GlobalPmCSR, &etdev->regs->global.pm_csr); } /** * DisablePhyComa - Disable the Phy Coma Mode - * @pAdapter: pointer to our adapter structure + * @etdev: pointer to our adapter structure */ -void DisablePhyComa(struct et131x_adapter *pAdapter) +void DisablePhyComa(struct et131x_adapter *etdev) { - PM_CSR_t GlobalPmCSR; + u32 GlobalPmCSR; - DBG_ENTER(et131x_dbginfo); - - GlobalPmCSR.value = readl(&pAdapter->CSRAddress->global.pm_csr.value); + GlobalPmCSR = readl(&etdev->regs->global.pm_csr); /* Disable phy_sw_coma register and re-enable JAGCore clocks */ - GlobalPmCSR.bits.pm_sysclk_gate = 1; - GlobalPmCSR.bits.pm_txclk_gate = 1; - GlobalPmCSR.bits.pm_rxclk_gate = 1; - GlobalPmCSR.bits.pm_phy_sw_coma = 0; - writel(GlobalPmCSR.value, &pAdapter->CSRAddress->global.pm_csr.value); + GlobalPmCSR |= ET_PMCSR_INIT; + GlobalPmCSR &= ~ET_PM_PHY_SW_COMA; + writel(GlobalPmCSR, &etdev->regs->global.pm_csr); /* Restore the GbE PHY speed and duplex modes; * Reset JAGCore; re-configure and initialize JAGCore and gigE PHY */ - pAdapter->AiForceSpeed = pAdapter->PoMgmt.PowerDownSpeed; - pAdapter->AiForceDpx = pAdapter->PoMgmt.PowerDownDuplex; + etdev->AiForceSpeed = etdev->PoMgmt.PowerDownSpeed; + etdev->AiForceDpx = etdev->PoMgmt.PowerDownDuplex; /* Re-initialize the send structures */ - et131x_init_send(pAdapter); + et131x_init_send(etdev); /* Reset the RFD list and re-start RU */ - et131x_reset_recv(pAdapter); + et131x_reset_recv(etdev); /* Bring the device back to the state it was during init prior to - * autonegotiation being complete. This way, when we get the auto-neg - * complete interrupt, we can complete init by calling ConfigMacREGS2. - */ - et131x_soft_reset(pAdapter); + * autonegotiation being complete. This way, when we get the auto-neg + * complete interrupt, we can complete init by calling ConfigMacREGS2. + */ + et131x_soft_reset(etdev); /* setup et1310 as per the documentation ?? */ - et131x_adapter_setup(pAdapter); + et131x_adapter_setup(etdev); /* Allow Tx to restart */ - MP_CLEAR_FLAG(pAdapter, fMP_ADAPTER_LOWER_POWER); + etdev->Flags &= ~fMP_ADAPTER_LOWER_POWER; /* Need to re-enable Rx. */ - et131x_rx_dma_enable(pAdapter); - - DBG_LEAVE(et131x_dbginfo); + et131x_rx_dma_enable(etdev); } diff --git a/drivers/staging/et131x/et1310_pm.h b/drivers/staging/et131x/et1310_pm.h index 6802338..295f3ab 100644 --- a/drivers/staging/et131x/et1310_pm.h +++ b/drivers/staging/et131x/et1310_pm.h @@ -2,7 +2,7 @@ * Agere Systems Inc. * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * http://www.agere.com * @@ -20,7 +20,7 @@ * software indicates your acceptance of these terms and conditions. If you do * not agree with these terms and conditions, do not use the software. * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * * Redistribution and use in source or binary forms, with or without @@ -41,7 +41,7 @@ * * Disclaimer * - * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN @@ -61,64 +61,24 @@ #include "et1310_address_map.h" -#define MAX_WOL_PACKET_SIZE 0x80 -#define MAX_WOL_MASK_SIZE ( MAX_WOL_PACKET_SIZE / 8 ) -#define NUM_WOL_PATTERNS 0x5 -#define CRC16_POLY 0x1021 - -/* Definition of NDIS_DEVICE_POWER_STATE */ -typedef enum { - NdisDeviceStateUnspecified = 0, - NdisDeviceStateD0, - NdisDeviceStateD1, - NdisDeviceStateD2, - NdisDeviceStateD3 -} NDIS_DEVICE_POWER_STATE; - typedef struct _MP_POWER_MGMT { /* variable putting the phy into coma mode when boot up with no cable * plugged in after 5 seconds */ u8 TransPhyComaModeOnBoot; - /* Array holding the five CRC values that the device is currently - * using for WOL. This will be queried when a pattern is to be - * removed. - */ - u32 localWolAndCrc0; - u16 WOLPatternList[NUM_WOL_PATTERNS]; - u8 WOLMaskList[NUM_WOL_PATTERNS][MAX_WOL_MASK_SIZE]; - u32 WOLMaskSize[NUM_WOL_PATTERNS]; - - /* IP address */ - union { - u32 u32; - u8 u8[4]; - } IPAddress; - - /* Current Power state of the adapter. */ - NDIS_DEVICE_POWER_STATE PowerState; - bool WOLState; - bool WOLEnabled; - bool Failed10Half; - bool bFailedStateTransition; - /* Next two used to save power information at power down. This * information will be used during power up to set up parts of Power * Management in JAGCore */ - u32 tx_en; - u32 rx_en; u16 PowerDownSpeed; u8 PowerDownDuplex; } MP_POWER_MGMT, *PMP_POWER_MGMT; /* Forward declaration of the private adapter structure - * ( IS THERE A WAY TO DO THIS WITH A TYPEDEF??? ) */ struct et131x_adapter; -u16 CalculateCCITCRC16(u8 *Pattern, u8 *Mask, u32 MaskSize); void EnablePhyComa(struct et131x_adapter *adapter); void DisablePhyComa(struct et131x_adapter *adapter); diff --git a/drivers/staging/et131x/et1310_rx.c b/drivers/staging/et131x/et1310_rx.c index 8dc559a..8f2e91f 100644 --- a/drivers/staging/et131x/et1310_rx.c +++ b/drivers/staging/et131x/et1310_rx.c @@ -2,7 +2,7 @@ * Agere Systems Inc. * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * http://www.agere.com * @@ -19,7 +19,7 @@ * software indicates your acceptance of these terms and conditions. If you do * not agree with these terms and conditions, do not use the software. * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * * Redistribution and use in source or binary forms, with or without @@ -40,7 +40,7 @@ * * Disclaimer * - * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN @@ -56,7 +56,6 @@ */ #include "et131x_version.h" -#include "et131x_debug.h" #include "et131x_defs.h" #include <linux/pci.h> @@ -74,9 +73,9 @@ #include <linux/interrupt.h> #include <linux/in.h> #include <linux/delay.h> -#include <asm/io.h> +#include <linux/io.h> +#include <linux/bitops.h> #include <asm/system.h> -#include <asm/bitops.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> @@ -93,13 +92,8 @@ #include "et1310_rx.h" -/* Data for debugging facilities */ -#ifdef CONFIG_ET131X_DEBUG -extern dbg_info_t *et131x_dbginfo; -#endif /* CONFIG_ET131X_DEBUG */ - -void nic_return_rfd(struct et131x_adapter *pAdapter, PMP_RFD pMpRfd); +void nic_return_rfd(struct et131x_adapter *etdev, PMP_RFD pMpRfd); /** * et131x_rx_dma_memory_alloc @@ -117,10 +111,8 @@ int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) uint32_t pktStatRingSize, FBRChunkSize; RX_RING_t *rx_ring; - DBG_ENTER(et131x_dbginfo); - /* Setup some convenience pointers */ - rx_ring = (RX_RING_t *) & adapter->RxRing; + rx_ring = (RX_RING_t *) &adapter->RxRing; /* Alloc memory for the lookup table */ #ifdef USE_FBR0 @@ -183,9 +175,8 @@ int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) bufsize, &rx_ring->pFbr1RingPa); if (!rx_ring->pFbr1RingVa) { - DBG_ERROR(et131x_dbginfo, + dev_err(&adapter->pdev->dev, "Cannot alloc memory for Free Buffer Ring 1\n"); - DBG_LEAVE(et131x_dbginfo); return -ENOMEM; } @@ -213,9 +204,8 @@ int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) bufsize, &rx_ring->pFbr0RingPa); if (!rx_ring->pFbr0RingVa) { - DBG_ERROR(et131x_dbginfo, + dev_err(&adapter->pdev->dev, "Cannot alloc memory for Free Buffer Ring 0\n"); - DBG_LEAVE(et131x_dbginfo); return -ENOMEM; } @@ -250,11 +240,10 @@ int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) * the size of FBR0. By allocating N buffers at once, we * reduce this overhead. */ - if (rx_ring->Fbr1BufferSize > 4096) { + if (rx_ring->Fbr1BufferSize > 4096) Fbr1Align = 4096; - } else { + else Fbr1Align = rx_ring->Fbr1BufferSize; - } FBRChunkSize = (FBR_CHUNKS * rx_ring->Fbr1BufferSize) + Fbr1Align - 1; @@ -263,8 +252,8 @@ int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) &rx_ring->Fbr1MemPa[OuterLoop]); if (!rx_ring->Fbr1MemVa[OuterLoop]) { - DBG_ERROR(et131x_dbginfo, "Could not alloc memory\n"); - DBG_LEAVE(et131x_dbginfo); + dev_err(&adapter->pdev->dev, + "Could not alloc memory\n"); return -ENOMEM; } @@ -314,8 +303,8 @@ int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) &rx_ring->Fbr0MemPa[OuterLoop]); if (!rx_ring->Fbr0MemVa[OuterLoop]) { - DBG_ERROR(et131x_dbginfo, "Could not alloc memory\n"); - DBG_LEAVE(et131x_dbginfo); + dev_err(&adapter->pdev->dev, + "Could not alloc memory\n"); return -ENOMEM; } @@ -357,9 +346,8 @@ int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) &rx_ring->pPSRingPa); if (!rx_ring->pPSRingVa) { - DBG_ERROR(et131x_dbginfo, + dev_err(&adapter->pdev->dev, "Cannot alloc memory for Packet Status Ring\n"); - DBG_LEAVE(et131x_dbginfo); return -ENOMEM; } @@ -385,9 +373,8 @@ int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) sizeof(RX_STATUS_BLOCK_t) + 0x7, &rx_ring->pRxStatusPa); if (!rx_ring->pRxStatusVa) { - DBG_ERROR(et131x_dbginfo, + dev_err(&adapter->pdev->dev, "Cannot alloc memory for Status Block\n"); - DBG_LEAVE(et131x_dbginfo); return -ENOMEM; } @@ -416,15 +403,13 @@ int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) SLAB_HWCACHE_ALIGN, NULL); - MP_SET_FLAG(adapter, fMP_ADAPTER_RECV_LOOKASIDE); + adapter->Flags |= fMP_ADAPTER_RECV_LOOKASIDE; /* The RFDs are going to be put on lists later on, so initialize the * lists now. */ INIT_LIST_HEAD(&rx_ring->RecvList); INIT_LIST_HEAD(&rx_ring->RecvPendingList); - - DBG_LEAVE(et131x_dbginfo); return 0; } @@ -440,13 +425,11 @@ void et131x_rx_dma_memory_free(struct et131x_adapter *adapter) PMP_RFD pMpRfd; RX_RING_t *rx_ring; - DBG_ENTER(et131x_dbginfo); - /* Setup some convenience pointers */ - rx_ring = (RX_RING_t *) & adapter->RxRing; + rx_ring = (RX_RING_t *) &adapter->RxRing; /* Free RFDs and associated packet descriptors */ - DBG_ASSERT(rx_ring->nReadyRecv == rx_ring->NumRfd); + WARN_ON(rx_ring->nReadyRecv != rx_ring->NumRfd); while (!list_empty(&rx_ring->RecvList)) { pMpRfd = (MP_RFD *) list_entry(rx_ring->RecvList.next, @@ -471,11 +454,10 @@ void et131x_rx_dma_memory_free(struct et131x_adapter *adapter) if (rx_ring->Fbr1MemVa[index]) { uint32_t Fbr1Align; - if (rx_ring->Fbr1BufferSize > 4096) { + if (rx_ring->Fbr1BufferSize > 4096) Fbr1Align = 4096; - } else { + else Fbr1Align = rx_ring->Fbr1BufferSize; - } bufsize = (rx_ring->Fbr1BufferSize * FBR_CHUNKS) + @@ -491,8 +473,8 @@ void et131x_rx_dma_memory_free(struct et131x_adapter *adapter) } /* Now the FIFO itself */ - rx_ring->pFbr1RingVa = (void *)((uint8_t *) rx_ring->pFbr1RingVa - - rx_ring->Fbr1offset); + rx_ring->pFbr1RingVa = (void *)((uint8_t *) + rx_ring->pFbr1RingVa - rx_ring->Fbr1offset); bufsize = (sizeof(FBR_DESC_t) * rx_ring->Fbr1NumEntries) + 0xfff; @@ -525,8 +507,8 @@ void et131x_rx_dma_memory_free(struct et131x_adapter *adapter) } /* Now the FIFO itself */ - rx_ring->pFbr0RingVa = (void *)((uint8_t *) rx_ring->pFbr0RingVa - - rx_ring->Fbr0offset); + rx_ring->pFbr0RingVa = (void *)((uint8_t *) + rx_ring->pFbr0RingVa - rx_ring->Fbr0offset); bufsize = (sizeof(FBR_DESC_t) * rx_ring->Fbr0NumEntries) + 0xfff; @@ -556,12 +538,12 @@ void et131x_rx_dma_memory_free(struct et131x_adapter *adapter) /* Free area of memory for the writeback of status information */ if (rx_ring->pRxStatusVa) { - rx_ring->pRxStatusVa = (void *)((uint8_t *) rx_ring->pRxStatusVa - - rx_ring->RxStatusOffset); + rx_ring->pRxStatusVa = (void *)((uint8_t *) + rx_ring->pRxStatusVa - rx_ring->RxStatusOffset); pci_free_consistent(adapter->pdev, - sizeof(RX_STATUS_BLOCK_t) + 0x7, - rx_ring->pRxStatusVa, rx_ring->pRxStatusPa); + sizeof(RX_STATUS_BLOCK_t) + 0x7, + rx_ring->pRxStatusVa, rx_ring->pRxStatusPa); rx_ring->pRxStatusVa = NULL; } @@ -571,9 +553,9 @@ void et131x_rx_dma_memory_free(struct et131x_adapter *adapter) /* Free receive packet pool */ /* Destroy the lookaside (RFD) pool */ - if (MP_TEST_FLAG(adapter, fMP_ADAPTER_RECV_LOOKASIDE)) { + if (adapter->Flags & fMP_ADAPTER_RECV_LOOKASIDE) { kmem_cache_destroy(rx_ring->RecvLookaside); - MP_CLEAR_FLAG(adapter, fMP_ADAPTER_RECV_LOOKASIDE); + adapter->Flags &= ~fMP_ADAPTER_RECV_LOOKASIDE; } /* Free the FBR Lookup Table */ @@ -585,8 +567,6 @@ void et131x_rx_dma_memory_free(struct et131x_adapter *adapter) /* Reset Counters */ rx_ring->nReadyRecv = 0; - - DBG_LEAVE(et131x_dbginfo); } /** @@ -603,10 +583,8 @@ int et131x_init_recv(struct et131x_adapter *adapter) uint32_t TotalNumRfd = 0; RX_RING_t *rx_ring = NULL; - DBG_ENTER(et131x_dbginfo); - /* Setup some convenience pointers */ - rx_ring = (RX_RING_t *) & adapter->RxRing; + rx_ring = (RX_RING_t *) &adapter->RxRing; /* Setup each RFD */ for (RfdCount = 0; RfdCount < rx_ring->NumRfd; RfdCount++) { @@ -614,7 +592,7 @@ int et131x_init_recv(struct et131x_adapter *adapter) GFP_ATOMIC | GFP_DMA); if (!pMpRfd) { - DBG_ERROR(et131x_dbginfo, + dev_err(&adapter->pdev->dev, "Couldn't alloc RFD out of kmem_cache\n"); status = -ENOMEM; continue; @@ -622,7 +600,7 @@ int et131x_init_recv(struct et131x_adapter *adapter) status = et131x_rfd_resources_alloc(adapter, pMpRfd); if (status != 0) { - DBG_ERROR(et131x_dbginfo, + dev_err(&adapter->pdev->dev, "Couldn't alloc packet for RFD\n"); kmem_cache_free(rx_ring->RecvLookaside, pMpRfd); continue; @@ -636,19 +614,16 @@ int et131x_init_recv(struct et131x_adapter *adapter) TotalNumRfd++; } - if (TotalNumRfd > NIC_MIN_NUM_RFD) { + if (TotalNumRfd > NIC_MIN_NUM_RFD) status = 0; - } rx_ring->NumRfd = TotalNumRfd; if (status != 0) { kmem_cache_free(rx_ring->RecvLookaside, pMpRfd); - DBG_ERROR(et131x_dbginfo, + dev_err(&adapter->pdev->dev, "Allocation problems in et131x_init_recv\n"); } - - DBG_LEAVE(et131x_dbginfo); return status; } @@ -679,21 +654,19 @@ void et131x_rfd_resources_free(struct et131x_adapter *adapter, MP_RFD *pMpRfd) /** * ConfigRxDmaRegs - Start of Rx_DMA init sequence - * @pAdapter: pointer to our adapter structure + * @etdev: pointer to our adapter structure */ -void ConfigRxDmaRegs(struct et131x_adapter *pAdapter) +void ConfigRxDmaRegs(struct et131x_adapter *etdev) { - struct _RXDMA_t __iomem *pRxDma = &pAdapter->CSRAddress->rxdma; - struct _rx_ring_t *pRxLocal = &pAdapter->RxRing; - PFBR_DESC_t pFbrEntry; - uint32_t iEntry; + struct _RXDMA_t __iomem *rx_dma = &etdev->regs->rxdma; + struct _rx_ring_t *pRxLocal = &etdev->RxRing; + PFBR_DESC_t fbr_entry; + uint32_t entry; RXDMA_PSR_NUM_DES_t psr_num_des; - unsigned long lockflags; - - DBG_ENTER(et131x_dbginfo); + unsigned long flags; /* Halt RXDMA to perform the reconfigure. */ - et131x_rx_dma_disable(pAdapter); + et131x_rx_dma_disable(etdev); /* Load the completion writeback physical address * @@ -703,8 +676,8 @@ void ConfigRxDmaRegs(struct et131x_adapter *pAdapter) * before storing the adjusted address. */ writel((uint32_t) (pRxLocal->RxStatusRealPA >> 32), - &pRxDma->dma_wb_base_hi); - writel((uint32_t) pRxLocal->RxStatusRealPA, &pRxDma->dma_wb_base_lo); + &rx_dma->dma_wb_base_hi); + writel((uint32_t) pRxLocal->RxStatusRealPA, &rx_dma->dma_wb_base_lo); memset(pRxLocal->pRxStatusVa, 0, sizeof(RX_STATUS_BLOCK_t)); @@ -712,82 +685,66 @@ void ConfigRxDmaRegs(struct et131x_adapter *pAdapter) * 1310's registers */ writel((uint32_t) (pRxLocal->pPSRingRealPa >> 32), - &pRxDma->psr_base_hi); - writel((uint32_t) pRxLocal->pPSRingRealPa, &pRxDma->psr_base_lo); - writel(pRxLocal->PsrNumEntries - 1, &pRxDma->psr_num_des.value); - writel(0, &pRxDma->psr_full_offset.value); + &rx_dma->psr_base_hi); + writel((uint32_t) pRxLocal->pPSRingRealPa, &rx_dma->psr_base_lo); + writel(pRxLocal->PsrNumEntries - 1, &rx_dma->psr_num_des.value); + writel(0, &rx_dma->psr_full_offset.value); - psr_num_des.value = readl(&pRxDma->psr_num_des.value); + psr_num_des.value = readl(&rx_dma->psr_num_des.value); writel((psr_num_des.bits.psr_ndes * LO_MARK_PERCENT_FOR_PSR) / 100, - &pRxDma->psr_min_des.value); + &rx_dma->psr_min_des.value); - spin_lock_irqsave(&pAdapter->RcvLock, lockflags); + spin_lock_irqsave(&etdev->RcvLock, flags); /* These local variables track the PSR in the adapter structure */ pRxLocal->local_psr_full.bits.psr_full = 0; pRxLocal->local_psr_full.bits.psr_full_wrap = 0; /* Now's the best time to initialize FBR1 contents */ - pFbrEntry = (PFBR_DESC_t) pRxLocal->pFbr1RingVa; - for (iEntry = 0; iEntry < pRxLocal->Fbr1NumEntries; iEntry++) { - pFbrEntry->addr_hi = pRxLocal->Fbr[1]->PAHigh[iEntry]; - pFbrEntry->addr_lo = pRxLocal->Fbr[1]->PALow[iEntry]; - pFbrEntry->word2.bits.bi = iEntry; - pFbrEntry++; + fbr_entry = (PFBR_DESC_t) pRxLocal->pFbr1RingVa; + for (entry = 0; entry < pRxLocal->Fbr1NumEntries; entry++) { + fbr_entry->addr_hi = pRxLocal->Fbr[1]->PAHigh[entry]; + fbr_entry->addr_lo = pRxLocal->Fbr[1]->PALow[entry]; + fbr_entry->word2.bits.bi = entry; + fbr_entry++; } /* Set the address and parameters of Free buffer ring 1 (and 0 if * required) into the 1310's registers */ - writel((uint32_t) (pRxLocal->Fbr1Realpa >> 32), &pRxDma->fbr1_base_hi); - writel((uint32_t) pRxLocal->Fbr1Realpa, &pRxDma->fbr1_base_lo); - writel(pRxLocal->Fbr1NumEntries - 1, &pRxDma->fbr1_num_des.value); - - { - DMA10W_t fbr1_full = { 0 }; - - fbr1_full.bits.val = 0; - fbr1_full.bits.wrap = 1; - writel(fbr1_full.value, &pRxDma->fbr1_full_offset.value); - } + writel((uint32_t) (pRxLocal->Fbr1Realpa >> 32), &rx_dma->fbr1_base_hi); + writel((uint32_t) pRxLocal->Fbr1Realpa, &rx_dma->fbr1_base_lo); + writel(pRxLocal->Fbr1NumEntries - 1, &rx_dma->fbr1_num_des.value); + writel(ET_DMA10_WRAP, &rx_dma->fbr1_full_offset); /* This variable tracks the free buffer ring 1 full position, so it * has to match the above. */ - pRxLocal->local_Fbr1_full.bits.val = 0; - pRxLocal->local_Fbr1_full.bits.wrap = 1; + pRxLocal->local_Fbr1_full = ET_DMA10_WRAP; writel(((pRxLocal->Fbr1NumEntries * LO_MARK_PERCENT_FOR_RX) / 100) - 1, - &pRxDma->fbr1_min_des.value); + &rx_dma->fbr1_min_des.value); #ifdef USE_FBR0 /* Now's the best time to initialize FBR0 contents */ - pFbrEntry = (PFBR_DESC_t) pRxLocal->pFbr0RingVa; - for (iEntry = 0; iEntry < pRxLocal->Fbr0NumEntries; iEntry++) { - pFbrEntry->addr_hi = pRxLocal->Fbr[0]->PAHigh[iEntry]; - pFbrEntry->addr_lo = pRxLocal->Fbr[0]->PALow[iEntry]; - pFbrEntry->word2.bits.bi = iEntry; - pFbrEntry++; + fbr_entry = (PFBR_DESC_t) pRxLocal->pFbr0RingVa; + for (entry = 0; entry < pRxLocal->Fbr0NumEntries; entry++) { + fbr_entry->addr_hi = pRxLocal->Fbr[0]->PAHigh[entry]; + fbr_entry->addr_lo = pRxLocal->Fbr[0]->PALow[entry]; + fbr_entry->word2.bits.bi = entry; + fbr_entry++; } - writel((uint32_t) (pRxLocal->Fbr0Realpa >> 32), &pRxDma->fbr0_base_hi); - writel((uint32_t) pRxLocal->Fbr0Realpa, &pRxDma->fbr0_base_lo); - writel(pRxLocal->Fbr0NumEntries - 1, &pRxDma->fbr0_num_des.value); - - { - DMA10W_t fbr0_full = { 0 }; - - fbr0_full.bits.val = 0; - fbr0_full.bits.wrap = 1; - writel(fbr0_full.value, &pRxDma->fbr0_full_offset.value); - } + writel((uint32_t) (pRxLocal->Fbr0Realpa >> 32), &rx_dma->fbr0_base_hi); + writel((uint32_t) pRxLocal->Fbr0Realpa, &rx_dma->fbr0_base_lo); + writel(pRxLocal->Fbr0NumEntries - 1, &rx_dma->fbr0_num_des.value); + writel(ET_DMA10_WRAP, &rx_dma->fbr0_full_offset); /* This variable tracks the free buffer ring 0 full position, so it * has to match the above. */ - pRxLocal->local_Fbr0_full.bits.val = 0; - pRxLocal->local_Fbr0_full.bits.wrap = 1; + pRxLocal->local_Fbr0_full = ET_DMA10_WRAP; writel(((pRxLocal->Fbr0NumEntries * LO_MARK_PERCENT_FOR_RX) / 100) - 1, - &pRxDma->fbr0_min_des.value); + &rx_dma->fbr0_min_des.value); #endif /* Program the number of packets we will receive before generating an @@ -795,115 +752,102 @@ void ConfigRxDmaRegs(struct et131x_adapter *pAdapter) * For version B silicon, this value gets updated once autoneg is *complete. */ - writel(pAdapter->RegistryRxNumBuffers, &pRxDma->num_pkt_done.value); + writel(PARM_RX_NUM_BUFS_DEF, &rx_dma->num_pkt_done.value); /* The "time_done" is not working correctly to coalesce interrupts * after a given time period, but rather is giving us an interrupt * regardless of whether we have received packets. * This value gets updated once autoneg is complete. */ - writel(pAdapter->RegistryRxTimeInterval, &pRxDma->max_pkt_time.value); - - spin_unlock_irqrestore(&pAdapter->RcvLock, lockflags); + writel(PARM_RX_TIME_INT_DEF, &rx_dma->max_pkt_time.value); - DBG_LEAVE(et131x_dbginfo); + spin_unlock_irqrestore(&etdev->RcvLock, flags); } /** * SetRxDmaTimer - Set the heartbeat timer according to line rate. - * @pAdapter: pointer to our adapter structure + * @etdev: pointer to our adapter structure */ -void SetRxDmaTimer(struct et131x_adapter *pAdapter) +void SetRxDmaTimer(struct et131x_adapter *etdev) { /* For version B silicon, we do not use the RxDMA timer for 10 and 100 * Mbits/s line rates. We do not enable and RxDMA interrupt coalescing. */ - if ((pAdapter->uiLinkSpeed == TRUEPHY_SPEED_100MBPS) || - (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_10MBPS)) { - writel(0, &pAdapter->CSRAddress->rxdma.max_pkt_time.value); - writel(1, &pAdapter->CSRAddress->rxdma.num_pkt_done.value); + if ((etdev->linkspeed == TRUEPHY_SPEED_100MBPS) || + (etdev->linkspeed == TRUEPHY_SPEED_10MBPS)) { + writel(0, &etdev->regs->rxdma.max_pkt_time.value); + writel(1, &etdev->regs->rxdma.num_pkt_done.value); } } /** * et131x_rx_dma_disable - Stop of Rx_DMA on the ET1310 - * @pAdapter: pointer to our adapter structure + * @etdev: pointer to our adapter structure */ -void et131x_rx_dma_disable(struct et131x_adapter *pAdapter) +void et131x_rx_dma_disable(struct et131x_adapter *etdev) { RXDMA_CSR_t csr; - DBG_ENTER(et131x_dbginfo); - /* Setup the receive dma configuration register */ - writel(0x00002001, &pAdapter->CSRAddress->rxdma.csr.value); - csr.value = readl(&pAdapter->CSRAddress->rxdma.csr.value); + writel(0x00002001, &etdev->regs->rxdma.csr.value); + csr.value = readl(&etdev->regs->rxdma.csr.value); if (csr.bits.halt_status != 1) { udelay(5); - csr.value = readl(&pAdapter->CSRAddress->rxdma.csr.value); - if (csr.bits.halt_status != 1) { - DBG_ERROR(et131x_dbginfo, - "RX Dma failed to enter halt state. CSR 0x%08x\n", - csr.value); - } + csr.value = readl(&etdev->regs->rxdma.csr.value); + if (csr.bits.halt_status != 1) + dev_err(&etdev->pdev->dev, + "RX Dma failed to enter halt state. CSR 0x%08x\n", + csr.value); } - - DBG_LEAVE(et131x_dbginfo); } /** * et131x_rx_dma_enable - re-start of Rx_DMA on the ET1310. - * @pAdapter: pointer to our adapter structure + * @etdev: pointer to our adapter structure */ -void et131x_rx_dma_enable(struct et131x_adapter *pAdapter) +void et131x_rx_dma_enable(struct et131x_adapter *etdev) { - DBG_RX_ENTER(et131x_dbginfo); - - if (pAdapter->RegistryPhyLoopbk) { - /* RxDMA is disabled for loopback operation. */ - writel(0x1, &pAdapter->CSRAddress->rxdma.csr.value); - } else { + if (etdev->RegistryPhyLoopbk) + /* RxDMA is disabled for loopback operation. */ + writel(0x1, &etdev->regs->rxdma.csr.value); + else { /* Setup the receive dma configuration register for normal operation */ RXDMA_CSR_t csr = { 0 }; csr.bits.fbr1_enable = 1; - if (pAdapter->RxRing.Fbr1BufferSize == 4096) { + if (etdev->RxRing.Fbr1BufferSize == 4096) csr.bits.fbr1_size = 1; - } else if (pAdapter->RxRing.Fbr1BufferSize == 8192) { + else if (etdev->RxRing.Fbr1BufferSize == 8192) csr.bits.fbr1_size = 2; - } else if (pAdapter->RxRing.Fbr1BufferSize == 16384) { + else if (etdev->RxRing.Fbr1BufferSize == 16384) csr.bits.fbr1_size = 3; - } #ifdef USE_FBR0 csr.bits.fbr0_enable = 1; - if (pAdapter->RxRing.Fbr0BufferSize == 256) { + if (etdev->RxRing.Fbr0BufferSize == 256) csr.bits.fbr0_size = 1; - } else if (pAdapter->RxRing.Fbr0BufferSize == 512) { + else if (etdev->RxRing.Fbr0BufferSize == 512) csr.bits.fbr0_size = 2; - } else if (pAdapter->RxRing.Fbr0BufferSize == 1024) { + else if (etdev->RxRing.Fbr0BufferSize == 1024) csr.bits.fbr0_size = 3; - } #endif - writel(csr.value, &pAdapter->CSRAddress->rxdma.csr.value); + writel(csr.value, &etdev->regs->rxdma.csr.value); - csr.value = readl(&pAdapter->CSRAddress->rxdma.csr.value); + csr.value = readl(&etdev->regs->rxdma.csr.value); if (csr.bits.halt_status != 0) { udelay(5); - csr.value = readl(&pAdapter->CSRAddress->rxdma.csr.value); + csr.value = readl(&etdev->regs->rxdma.csr.value); if (csr.bits.halt_status != 0) { - DBG_ERROR(et131x_dbginfo, - "RX Dma failed to exit halt state. CSR 0x%08x\n", - csr.value); + dev_err(&etdev->pdev->dev, + "RX Dma failed to exit halt state. CSR 0x%08x\n", + csr.value); } } } - - DBG_RX_LEAVE(et131x_dbginfo); } /** * nic_rx_pkts - Checks the hardware for available packets - * @pAdapter: pointer to our adapter + * @etdev: pointer to our adapter * * Returns pMpRfd, a pointer to our MPRFD. * @@ -912,24 +856,21 @@ void et131x_rx_dma_enable(struct et131x_adapter *pAdapter) * the packet to it, puts the RFD in the RecvPendList, and also returns * the pointer to the RFD. */ -PMP_RFD nic_rx_pkts(struct et131x_adapter *pAdapter) +PMP_RFD nic_rx_pkts(struct et131x_adapter *etdev) { - struct _rx_ring_t *pRxLocal = &pAdapter->RxRing; + struct _rx_ring_t *pRxLocal = &etdev->RxRing; PRX_STATUS_BLOCK_t pRxStatusBlock; PPKT_STAT_DESC_t pPSREntry; PMP_RFD pMpRfd; uint32_t nIndex; uint8_t *pBufVa; - unsigned long lockflags; + unsigned long flags; struct list_head *element; uint8_t ringIndex; uint16_t bufferIndex; uint32_t localLen; PKT_STAT_DESC_WORD0_t Word0; - - DBG_RX_ENTER(et131x_dbginfo); - /* RX Status block is written by the DMA engine prior to every * interrupt. It contains the next to be used entry in the Packet * Status Ring, and also the two Free Buffer rings. @@ -938,11 +879,9 @@ PMP_RFD nic_rx_pkts(struct et131x_adapter *pAdapter) if (pRxStatusBlock->Word1.bits.PSRoffset == pRxLocal->local_psr_full.bits.psr_full && - pRxStatusBlock->Word1.bits.PSRwrap == - pRxLocal->local_psr_full.bits.psr_full_wrap) { + pRxStatusBlock->Word1.bits.PSRwrap == + pRxLocal->local_psr_full.bits.psr_full_wrap) { /* Looks like this ring is not updated yet */ - DBG_RX(et131x_dbginfo, "(0)\n"); - DBG_RX_LEAVE(et131x_dbginfo); return NULL; } @@ -959,23 +898,6 @@ PMP_RFD nic_rx_pkts(struct et131x_adapter *pAdapter) bufferIndex = (uint16_t) pPSREntry->word1.bits.bi; Word0 = pPSREntry->word0; - DBG_RX(et131x_dbginfo, "RX PACKET STATUS\n"); - DBG_RX(et131x_dbginfo, "\tlength : %d\n", localLen); - DBG_RX(et131x_dbginfo, "\tringIndex : %d\n", ringIndex); - DBG_RX(et131x_dbginfo, "\tbufferIndex : %d\n", bufferIndex); - DBG_RX(et131x_dbginfo, "\tword0 : 0x%08x\n", Word0.value); - -#if 0 - /* Check the Status Word that the MAC has appended to the PSR - * entry in case the MAC has detected errors. - */ - if (Word0.value & ALCATEL_BAD_STATUS) { - DBG_ERROR(et131x_dbginfo, - "NICRxPkts >> Alcatel Status Word error." - "Value 0x%08x\n", pPSREntry->word0.value); - } -#endif - /* Indicate that we have used this PSR entry. */ if (++pRxLocal->local_psr_full.bits.psr_full > pRxLocal->PsrNumEntries - 1) { @@ -984,62 +906,53 @@ PMP_RFD nic_rx_pkts(struct et131x_adapter *pAdapter) } writel(pRxLocal->local_psr_full.value, - &pAdapter->CSRAddress->rxdma.psr_full_offset.value); + &etdev->regs->rxdma.psr_full_offset.value); #ifndef USE_FBR0 if (ringIndex != 1) { - DBG_ERROR(et131x_dbginfo, - "NICRxPkts PSR Entry %d indicates " - "Buffer Ring 0 in use\n", - pRxLocal->local_psr_full.bits.psr_full); - DBG_RX_LEAVE(et131x_dbginfo); return NULL; } #endif #ifdef USE_FBR0 if (ringIndex > 1 || - (ringIndex == 0 && - bufferIndex > pRxLocal->Fbr0NumEntries - 1) || - (ringIndex == 1 && - bufferIndex > pRxLocal->Fbr1NumEntries - 1)) + (ringIndex == 0 && + bufferIndex > pRxLocal->Fbr0NumEntries - 1) || + (ringIndex == 1 && + bufferIndex > pRxLocal->Fbr1NumEntries - 1)) #else if (ringIndex != 1 || - bufferIndex > pRxLocal->Fbr1NumEntries - 1) + bufferIndex > pRxLocal->Fbr1NumEntries - 1) #endif { /* Illegal buffer or ring index cannot be used by S/W*/ - DBG_ERROR(et131x_dbginfo, + dev_err(&etdev->pdev->dev, "NICRxPkts PSR Entry %d indicates " "length of %d and/or bad bi(%d)\n", pRxLocal->local_psr_full.bits.psr_full, localLen, bufferIndex); - DBG_RX_LEAVE(et131x_dbginfo); return NULL; } /* Get and fill the RFD. */ - spin_lock_irqsave(&pAdapter->RcvLock, lockflags); + spin_lock_irqsave(&etdev->RcvLock, flags); pMpRfd = NULL; element = pRxLocal->RecvList.next; pMpRfd = (PMP_RFD) list_entry(element, MP_RFD, list_node); if (pMpRfd == NULL) { - DBG_RX(et131x_dbginfo, - "NULL RFD returned from RecvList via list_entry()\n"); - DBG_RX_LEAVE(et131x_dbginfo); - spin_unlock_irqrestore(&pAdapter->RcvLock, lockflags); + spin_unlock_irqrestore(&etdev->RcvLock, flags); return NULL; } list_del(&pMpRfd->list_node); pRxLocal->nReadyRecv--; - spin_unlock_irqrestore(&pAdapter->RcvLock, lockflags); + spin_unlock_irqrestore(&etdev->RcvLock, flags); - pMpRfd->iBufferIndex = bufferIndex; - pMpRfd->iRingIndex = ringIndex; + pMpRfd->bufferindex = bufferIndex; + pMpRfd->ringindex = ringIndex; /* In V1 silicon, there is a bug which screws up filtering of * runt packets. Therefore runt packet filtering is disabled @@ -1047,34 +960,21 @@ PMP_RFD nic_rx_pkts(struct et131x_adapter *pAdapter) * also counted here. */ if (localLen < (NIC_MIN_PACKET_SIZE + 4)) { - pAdapter->Stats.other_errors++; + etdev->Stats.other_errors++; localLen = 0; } if (localLen) { - if (pAdapter->ReplicaPhyLoopbk == 1) { + if (etdev->ReplicaPhyLoopbk == 1) { pBufVa = pRxLocal->Fbr[ringIndex]->Va[bufferIndex]; - if (memcmp(&pBufVa[6], &pAdapter->CurrentAddress[0], + if (memcmp(&pBufVa[6], &etdev->CurrentAddress[0], ETH_ALEN) == 0) { if (memcmp(&pBufVa[42], "Replica packet", ETH_HLEN)) { - pAdapter->ReplicaPhyLoopbkPF = 1; + etdev->ReplicaPhyLoopbkPF = 1; } } - DBG_WARNING(et131x_dbginfo, - "pBufVa:\t%02x:%02x:%02x:%02x:%02x:%02x\n", - pBufVa[6], pBufVa[7], pBufVa[8], - pBufVa[9], pBufVa[10], pBufVa[11]); - - DBG_WARNING(et131x_dbginfo, - "CurrentAddr:\t%02x:%02x:%02x:%02x:%02x:%02x\n", - pAdapter->CurrentAddress[0], - pAdapter->CurrentAddress[1], - pAdapter->CurrentAddress[2], - pAdapter->CurrentAddress[3], - pAdapter->CurrentAddress[4], - pAdapter->CurrentAddress[5]); } /* Determine if this is a multicast packet coming in */ @@ -1087,9 +987,9 @@ PMP_RFD nic_rx_pkts(struct et131x_adapter *pAdapter) * filters. Generally filter is 0x2b when in * promiscuous mode. */ - if ((pAdapter->PacketFilter & ET131X_PACKET_TYPE_MULTICAST) - && !(pAdapter->PacketFilter & ET131X_PACKET_TYPE_PROMISCUOUS) - && !(pAdapter->PacketFilter & ET131X_PACKET_TYPE_ALL_MULTICAST)) { + if ((etdev->PacketFilter & ET131X_PACKET_TYPE_MULTICAST) + && !(etdev->PacketFilter & ET131X_PACKET_TYPE_PROMISCUOUS) + && !(etdev->PacketFilter & ET131X_PACKET_TYPE_ALL_MULTICAST)) { pBufVa = pRxLocal->Fbr[ringIndex]-> Va[bufferIndex]; @@ -1098,20 +998,20 @@ PMP_RFD nic_rx_pkts(struct et131x_adapter *pAdapter) * matches one in our list. */ for (nIndex = 0; - nIndex < pAdapter->MCAddressCount; + nIndex < etdev->MCAddressCount; nIndex++) { if (pBufVa[0] == - pAdapter->MCList[nIndex][0] + etdev->MCList[nIndex][0] && pBufVa[1] == - pAdapter->MCList[nIndex][1] + etdev->MCList[nIndex][1] && pBufVa[2] == - pAdapter->MCList[nIndex][2] + etdev->MCList[nIndex][2] && pBufVa[3] == - pAdapter->MCList[nIndex][3] + etdev->MCList[nIndex][3] && pBufVa[4] == - pAdapter->MCList[nIndex][4] + etdev->MCList[nIndex][4] && pBufVa[5] == - pAdapter->MCList[nIndex][5]) { + etdev->MCList[nIndex][5]) { break; } } @@ -1124,48 +1024,44 @@ PMP_RFD nic_rx_pkts(struct et131x_adapter *pAdapter) * so we free our RFD when we return * from this function. */ - if (nIndex == pAdapter->MCAddressCount) { + if (nIndex == etdev->MCAddressCount) localLen = 0; - } } - if (localLen > 0) { - pAdapter->Stats.multircv++; - } - } else if (Word0.value & ALCATEL_BROADCAST_PKT) { - pAdapter->Stats.brdcstrcv++; - } else { + if (localLen > 0) + etdev->Stats.multircv++; + } else if (Word0.value & ALCATEL_BROADCAST_PKT) + etdev->Stats.brdcstrcv++; + else /* Not sure what this counter measures in * promiscuous mode. Perhaps we should check * the MAC address to see if it is directed * to us in promiscuous mode. */ - pAdapter->Stats.unircv++; - } + etdev->Stats.unircv++; } if (localLen > 0) { struct sk_buff *skb = NULL; - //pMpRfd->PacketSize = localLen - 4; + /* pMpRfd->PacketSize = localLen - 4; */ pMpRfd->PacketSize = localLen; skb = dev_alloc_skb(pMpRfd->PacketSize + 2); if (!skb) { - DBG_ERROR(et131x_dbginfo, + dev_err(&etdev->pdev->dev, "Couldn't alloc an SKB for Rx\n"); - DBG_RX_LEAVE(et131x_dbginfo); return NULL; } - pAdapter->net_stats.rx_bytes += pMpRfd->PacketSize; + etdev->net_stats.rx_bytes += pMpRfd->PacketSize; memcpy(skb_put(skb, pMpRfd->PacketSize), pRxLocal->Fbr[ringIndex]->Va[bufferIndex], pMpRfd->PacketSize); - skb->dev = pAdapter->netdev; - skb->protocol = eth_type_trans(skb, pAdapter->netdev); + skb->dev = etdev->netdev; + skb->protocol = eth_type_trans(skb, etdev->netdev); skb->ip_summed = CHECKSUM_NONE; netif_rx(skb); @@ -1173,49 +1069,42 @@ PMP_RFD nic_rx_pkts(struct et131x_adapter *pAdapter) pMpRfd->PacketSize = 0; } - nic_return_rfd(pAdapter, pMpRfd); - - DBG_RX(et131x_dbginfo, "(1)\n"); - DBG_RX_LEAVE(et131x_dbginfo); + nic_return_rfd(etdev, pMpRfd); return pMpRfd; } /** * et131x_reset_recv - Reset the receive list - * @pAdapter: pointer to our adapter + * @etdev: pointer to our adapter * * Assumption, Rcv spinlock has been acquired. */ -void et131x_reset_recv(struct et131x_adapter *pAdapter) +void et131x_reset_recv(struct et131x_adapter *etdev) { PMP_RFD pMpRfd; struct list_head *element; - DBG_ENTER(et131x_dbginfo); - - DBG_ASSERT(!list_empty(&pAdapter->RxRing.RecvList)); + WARN_ON(list_empty(&etdev->RxRing.RecvList)); /* Take all the RFD's from the pending list, and stick them on the * RecvList. */ - while (!list_empty(&pAdapter->RxRing.RecvPendingList)) { - element = pAdapter->RxRing.RecvPendingList.next; + while (!list_empty(&etdev->RxRing.RecvPendingList)) { + element = etdev->RxRing.RecvPendingList.next; pMpRfd = (PMP_RFD) list_entry(element, MP_RFD, list_node); - list_move_tail(&pMpRfd->list_node, &pAdapter->RxRing.RecvList); + list_move_tail(&pMpRfd->list_node, &etdev->RxRing.RecvList); } - - DBG_LEAVE(et131x_dbginfo); } /** * et131x_handle_recv_interrupt - Interrupt handler for receive processing - * @pAdapter: pointer to our adapter + * @etdev: pointer to our adapter * * Assumption, Rcv spinlock has been acquired. */ -void et131x_handle_recv_interrupt(struct et131x_adapter *pAdapter) +void et131x_handle_recv_interrupt(struct et131x_adapter *etdev) { PMP_RFD pMpRfd = NULL; struct sk_buff *PacketArray[NUM_PACKETS_HANDLED]; @@ -1225,43 +1114,37 @@ void et131x_handle_recv_interrupt(struct et131x_adapter *pAdapter) uint32_t PacketFreeCount = 0; bool TempUnfinishedRec = false; - DBG_RX_ENTER(et131x_dbginfo); - PacketsToHandle = NUM_PACKETS_HANDLED; /* Process up to available RFD's */ while (PacketArrayCount < PacketsToHandle) { - if (list_empty(&pAdapter->RxRing.RecvList)) { - DBG_ASSERT(pAdapter->RxRing.nReadyRecv == 0); - DBG_ERROR(et131x_dbginfo, "NO RFD's !!!!!!!!!!!!!\n"); + if (list_empty(&etdev->RxRing.RecvList)) { + WARN_ON(etdev->RxRing.nReadyRecv != 0); TempUnfinishedRec = true; break; } - pMpRfd = nic_rx_pkts(pAdapter); + pMpRfd = nic_rx_pkts(etdev); - if (pMpRfd == NULL) { + if (pMpRfd == NULL) break; - } /* Do not receive any packets until a filter has been set. - * Do not receive any packets until we are at D0. * Do not receive any packets until we have link. * If length is zero, return the RFD in order to advance the * Free buffer ring. */ - if ((!pAdapter->PacketFilter) || - (pAdapter->PoMgmt.PowerState != NdisDeviceStateD0) || - (!MP_LINK_DETECTED(pAdapter)) || - (pMpRfd->PacketSize == 0)) { + if (!etdev->PacketFilter || + !(etdev->Flags & fMP_ADAPTER_LINK_DETECTION) || + pMpRfd->PacketSize == 0) { continue; } /* Increment the number of packets we received */ - pAdapter->Stats.ipackets++; + etdev->Stats.ipackets++; /* Set the status on the packet, either resources or success */ - if (pAdapter->RxRing.nReadyRecv >= RFD_LOW_WATER_MARK) { + if (etdev->RxRing.nReadyRecv >= RFD_LOW_WATER_MARK) { /* Put this RFD on the pending list * * NOTE: nic_rx_pkts() above is already returning the @@ -1270,18 +1153,12 @@ void et131x_handle_recv_interrupt(struct et131x_adapter *pAdapter) * Besides, we don't really need (at this point) the * pending list anyway. */ - //spin_lock_irqsave( &pAdapter->RcvPendLock, lockflags ); - //list_add_tail( &pMpRfd->list_node, &pAdapter->RxRing.RecvPendingList ); - //spin_unlock_irqrestore( &pAdapter->RcvPendLock, lockflags ); - - /* Update the number of outstanding Recvs */ - //MP_INC_RCV_REF( pAdapter ); } else { RFDFreeArray[PacketFreeCount] = pMpRfd; PacketFreeCount++; - DBG_WARNING(et131x_dbginfo, - "RFD's are running out !!!!!!!!!!!!!\n"); + dev_warn(&etdev->pdev->dev, + "RFD's are running out\n"); } PacketArray[PacketArrayCount] = pMpRfd->Packet; @@ -1289,102 +1166,97 @@ void et131x_handle_recv_interrupt(struct et131x_adapter *pAdapter) } if ((PacketArrayCount == NUM_PACKETS_HANDLED) || TempUnfinishedRec) { - pAdapter->RxRing.UnfinishedReceives = true; - writel(pAdapter->RegistryTxTimeInterval * NANO_IN_A_MICRO, - &pAdapter->CSRAddress->global.watchdog_timer); + etdev->RxRing.UnfinishedReceives = true; + writel(PARM_TX_TIME_INT_DEF * NANO_IN_A_MICRO, + &etdev->regs->global.watchdog_timer); } else { /* Watchdog timer will disable itself if appropriate. */ - pAdapter->RxRing.UnfinishedReceives = false; + etdev->RxRing.UnfinishedReceives = false; } +} - DBG_RX_LEAVE(et131x_dbginfo); +static inline u32 bump_fbr(u32 *fbr, u32 limit) +{ + u32 v = *fbr; + add_10bit(&v, 1); + if (v > limit) + v = (*fbr & ~ET_DMA10_MASK) ^ ET_DMA10_WRAP; + *fbr = v; + return v; } /** * NICReturnRFD - Recycle a RFD and put it back onto the receive list - * @pAdapter: pointer to our adapter + * @etdev: pointer to our adapter * @pMpRfd: pointer to the RFD */ -void nic_return_rfd(struct et131x_adapter *pAdapter, PMP_RFD pMpRfd) +void nic_return_rfd(struct et131x_adapter *etdev, PMP_RFD pMpRfd) { - struct _rx_ring_t *pRxLocal = &pAdapter->RxRing; - struct _RXDMA_t __iomem *pRxDma = &pAdapter->CSRAddress->rxdma; - uint16_t bi = pMpRfd->iBufferIndex; - uint8_t ri = pMpRfd->iRingIndex; - unsigned long lockflags; - - DBG_RX_ENTER(et131x_dbginfo); + struct _rx_ring_t *rx_local = &etdev->RxRing; + struct _RXDMA_t __iomem *rx_dma = &etdev->regs->rxdma; + uint16_t bi = pMpRfd->bufferindex; + uint8_t ri = pMpRfd->ringindex; + unsigned long flags; /* We don't use any of the OOB data besides status. Otherwise, we * need to clean up OOB data */ if ( #ifdef USE_FBR0 - (ri == 0 && bi < pRxLocal->Fbr0NumEntries) || + (ri == 0 && bi < rx_local->Fbr0NumEntries) || #endif - (ri == 1 && bi < pRxLocal->Fbr1NumEntries)) { - spin_lock_irqsave(&pAdapter->FbrLock, lockflags); + (ri == 1 && bi < rx_local->Fbr1NumEntries)) { + spin_lock_irqsave(&etdev->FbrLock, flags); if (ri == 1) { PFBR_DESC_t pNextDesc = - (PFBR_DESC_t) (pRxLocal->pFbr1RingVa) + - pRxLocal->local_Fbr1_full.bits.val; + (PFBR_DESC_t) (rx_local->pFbr1RingVa) + + INDEX10(rx_local->local_Fbr1_full); /* Handle the Free Buffer Ring advancement here. Write * the PA / Buffer Index for the returned buffer into * the oldest (next to be freed)FBR entry */ - pNextDesc->addr_hi = pRxLocal->Fbr[1]->PAHigh[bi]; - pNextDesc->addr_lo = pRxLocal->Fbr[1]->PALow[bi]; + pNextDesc->addr_hi = rx_local->Fbr[1]->PAHigh[bi]; + pNextDesc->addr_lo = rx_local->Fbr[1]->PALow[bi]; pNextDesc->word2.value = bi; - if (++pRxLocal->local_Fbr1_full.bits.val > - (pRxLocal->Fbr1NumEntries - 1)) { - pRxLocal->local_Fbr1_full.bits.val = 0; - pRxLocal->local_Fbr1_full.bits.wrap ^= 1; - } - - writel(pRxLocal->local_Fbr1_full.value, - &pRxDma->fbr1_full_offset.value); + writel(bump_fbr(&rx_local->local_Fbr1_full, + rx_local->Fbr1NumEntries - 1), + &rx_dma->fbr1_full_offset); } #ifdef USE_FBR0 else { PFBR_DESC_t pNextDesc = - (PFBR_DESC_t) pRxLocal->pFbr0RingVa + - pRxLocal->local_Fbr0_full.bits.val; + (PFBR_DESC_t) rx_local->pFbr0RingVa + + INDEX10(rx_local->local_Fbr0_full); /* Handle the Free Buffer Ring advancement here. Write * the PA / Buffer Index for the returned buffer into * the oldest (next to be freed) FBR entry */ - pNextDesc->addr_hi = pRxLocal->Fbr[0]->PAHigh[bi]; - pNextDesc->addr_lo = pRxLocal->Fbr[0]->PALow[bi]; + pNextDesc->addr_hi = rx_local->Fbr[0]->PAHigh[bi]; + pNextDesc->addr_lo = rx_local->Fbr[0]->PALow[bi]; pNextDesc->word2.value = bi; - if (++pRxLocal->local_Fbr0_full.bits.val > - (pRxLocal->Fbr0NumEntries - 1)) { - pRxLocal->local_Fbr0_full.bits.val = 0; - pRxLocal->local_Fbr0_full.bits.wrap ^= 1; - } - - writel(pRxLocal->local_Fbr0_full.value, - &pRxDma->fbr0_full_offset.value); + writel(bump_fbr(&rx_local->local_Fbr0_full, + rx_local->Fbr0NumEntries - 1), + &rx_dma->fbr0_full_offset); } #endif - spin_unlock_irqrestore(&pAdapter->FbrLock, lockflags); + spin_unlock_irqrestore(&etdev->FbrLock, flags); } else { - DBG_ERROR(et131x_dbginfo, + dev_err(&etdev->pdev->dev, "NICReturnRFD illegal Buffer Index returned\n"); } /* The processing on this RFD is done, so put it back on the tail of * our list */ - spin_lock_irqsave(&pAdapter->RcvLock, lockflags); - list_add_tail(&pMpRfd->list_node, &pRxLocal->RecvList); - pRxLocal->nReadyRecv++; - spin_unlock_irqrestore(&pAdapter->RcvLock, lockflags); + spin_lock_irqsave(&etdev->RcvLock, flags); + list_add_tail(&pMpRfd->list_node, &rx_local->RecvList); + rx_local->nReadyRecv++; + spin_unlock_irqrestore(&etdev->RcvLock, flags); - DBG_ASSERT(pRxLocal->nReadyRecv <= pRxLocal->NumRfd); - DBG_RX_LEAVE(et131x_dbginfo); + WARN_ON(rx_local->nReadyRecv > rx_local->NumRfd); } diff --git a/drivers/staging/et131x/et1310_rx.h b/drivers/staging/et131x/et1310_rx.h index ea66dbc..72a5229 100644 --- a/drivers/staging/et131x/et1310_rx.h +++ b/drivers/staging/et131x/et1310_rx.h @@ -2,7 +2,7 @@ * Agere Systems Inc. * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * http://www.agere.com * @@ -20,7 +20,7 @@ * software indicates your acceptance of these terms and conditions. If you do * not agree with these terms and conditions, do not use the software. * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * * Redistribution and use in source or binary forms, with or without @@ -41,7 +41,7 @@ * * Disclaimer * - * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN @@ -64,10 +64,10 @@ #define USE_FBR0 true #ifdef USE_FBR0 -//#define FBR0_BUFFER_SIZE 256 +/* #define FBR0_BUFFER_SIZE 256 */ #endif -//#define FBR1_BUFFER_SIZE 2048 +/* #define FBR1_BUFFER_SIZE 2048 */ #define FBR_CHUNKS 32 @@ -95,11 +95,11 @@ typedef union _FBR_WORD2_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 reserved:22; // bits 10-31 - u32 bi:10; // bits 0-9(Buffer Index) + u32 reserved:22; /* bits 10-31 */ + u32 bi:10; /* bits 0-9(Buffer Index) */ #else - u32 bi:10; // bits 0-9(Buffer Index) - u32 reserved:22; // bit 10-31 + u32 bi:10; /* bits 0-9(Buffer Index) */ + u32 reserved:22; /* bit 10-31 */ #endif } bits; } FBR_WORD2_t, *PFBR_WORD2_t; @@ -115,70 +115,70 @@ typedef union _PKT_STAT_DESC_WORD0_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - // top 16 bits are from the Alcatel Status Word as enumerated in - // PE-MCXMAC Data Sheet IPD DS54 0210-1 (also IPD-DS80 0205-2) + /* top 16 bits are from the Alcatel Status Word as enumerated in */ + /* PE-MCXMAC Data Sheet IPD DS54 0210-1 (also IPD-DS80 0205-2) */ #if 0 - u32 asw_trunc:1; // bit 31(Rx frame truncated) + u32 asw_trunc:1; /* bit 31(Rx frame truncated) */ #endif - u32 asw_long_evt:1; // bit 31(Rx long event) - u32 asw_VLAN_tag:1; // bit 30(VLAN tag detected) - u32 asw_unsupported_op:1; // bit 29(unsupported OP code) - u32 asw_pause_frame:1; // bit 28(is a pause frame) - u32 asw_control_frame:1; // bit 27(is a control frame) - u32 asw_dribble_nibble:1; // bit 26(spurious bits after EOP) - u32 asw_broadcast:1; // bit 25(has a broadcast address) - u32 asw_multicast:1; // bit 24(has a multicast address) - u32 asw_OK:1; // bit 23(valid CRC + no code error) - u32 asw_too_long:1; // bit 22(frame length > 1518 bytes) - u32 asw_len_chk_err:1; // bit 21(frame length field incorrect) - u32 asw_CRC_err:1; // bit 20(CRC error) - u32 asw_code_err:1; // bit 19(one or more nibbles signalled as errors) - u32 asw_false_carrier_event:1; // bit 18(bad carrier since last good packet) - u32 asw_RX_DV_event:1; // bit 17(short receive event detected) - u32 asw_prev_pkt_dropped:1;// bit 16(e.g. IFG too small on previous) - u32 unused:5; // bits 11-15 - u32 vp:1; // bit 10(VLAN Packet) - u32 jp:1; // bit 9(Jumbo Packet) - u32 ft:1; // bit 8(Frame Truncated) - u32 drop:1; // bit 7(Drop packet) - u32 rxmac_error:1; // bit 6(RXMAC Error Indicator) - u32 wol:1; // bit 5(WOL Event) - u32 tcpp:1; // bit 4(TCP checksum pass) - u32 tcpa:1; // bit 3(TCP checksum assist) - u32 ipp:1; // bit 2(IP checksum pass) - u32 ipa:1; // bit 1(IP checksum assist) - u32 hp:1; // bit 0(hash pass) + u32 asw_long_evt:1; /* bit 31(Rx long event) */ + u32 asw_VLAN_tag:1; /* bit 30(VLAN tag detected) */ + u32 asw_unsupported_op:1; /* bit 29(unsupported OP code) */ + u32 asw_pause_frame:1; /* bit 28(is a pause frame) */ + u32 asw_control_frame:1; /* bit 27(is a control frame) */ + u32 asw_dribble_nibble:1; /* bit 26(spurious bits after EOP) */ + u32 asw_broadcast:1; /* bit 25(has a broadcast address) */ + u32 asw_multicast:1; /* bit 24(has a multicast address) */ + u32 asw_OK:1; /* bit 23(valid CRC + no code error) */ + u32 asw_too_long:1; /* bit 22(frame length > 1518 bytes) */ + u32 asw_len_chk_err:1; /* bit 21(frame length field incorrect) */ + u32 asw_CRC_err:1; /* bit 20(CRC error) */ + u32 asw_code_err:1; /* bit 19(one or more nibbles signalled as errors) */ + u32 asw_false_carrier_event:1; /* bit 18(bad carrier since last good packet) */ + u32 asw_RX_DV_event:1; /* bit 17(short receive event detected) */ + u32 asw_prev_pkt_dropped:1;/* bit 16(e.g. IFG too small on previous) */ + u32 unused:5; /* bits 11-15 */ + u32 vp:1; /* bit 10(VLAN Packet) */ + u32 jp:1; /* bit 9(Jumbo Packet) */ + u32 ft:1; /* bit 8(Frame Truncated) */ + u32 drop:1; /* bit 7(Drop packet) */ + u32 rxmac_error:1; /* bit 6(RXMAC Error Indicator) */ + u32 wol:1; /* bit 5(WOL Event) */ + u32 tcpp:1; /* bit 4(TCP checksum pass) */ + u32 tcpa:1; /* bit 3(TCP checksum assist) */ + u32 ipp:1; /* bit 2(IP checksum pass) */ + u32 ipa:1; /* bit 1(IP checksum assist) */ + u32 hp:1; /* bit 0(hash pass) */ #else - u32 hp:1; // bit 0(hash pass) - u32 ipa:1; // bit 1(IP checksum assist) - u32 ipp:1; // bit 2(IP checksum pass) - u32 tcpa:1; // bit 3(TCP checksum assist) - u32 tcpp:1; // bit 4(TCP checksum pass) - u32 wol:1; // bit 5(WOL Event) - u32 rxmac_error:1; // bit 6(RXMAC Error Indicator) - u32 drop:1; // bit 7(Drop packet) - u32 ft:1; // bit 8(Frame Truncated) - u32 jp:1; // bit 9(Jumbo Packet) - u32 vp:1; // bit 10(VLAN Packet) - u32 unused:5; // bits 11-15 - u32 asw_prev_pkt_dropped:1;// bit 16(e.g. IFG too small on previous) - u32 asw_RX_DV_event:1; // bit 17(short receive event detected) - u32 asw_false_carrier_event:1; // bit 18(bad carrier since last good packet) - u32 asw_code_err:1; // bit 19(one or more nibbles signalled as errors) - u32 asw_CRC_err:1; // bit 20(CRC error) - u32 asw_len_chk_err:1; // bit 21(frame length field incorrect) - u32 asw_too_long:1; // bit 22(frame length > 1518 bytes) - u32 asw_OK:1; // bit 23(valid CRC + no code error) - u32 asw_multicast:1; // bit 24(has a multicast address) - u32 asw_broadcast:1; // bit 25(has a broadcast address) - u32 asw_dribble_nibble:1; // bit 26(spurious bits after EOP) - u32 asw_control_frame:1; // bit 27(is a control frame) - u32 asw_pause_frame:1; // bit 28(is a pause frame) - u32 asw_unsupported_op:1; // bit 29(unsupported OP code) - u32 asw_VLAN_tag:1; // bit 30(VLAN tag detected) - u32 asw_long_evt:1; // bit 31(Rx long event) + u32 hp:1; /* bit 0(hash pass) */ + u32 ipa:1; /* bit 1(IP checksum assist) */ + u32 ipp:1; /* bit 2(IP checksum pass) */ + u32 tcpa:1; /* bit 3(TCP checksum assist) */ + u32 tcpp:1; /* bit 4(TCP checksum pass) */ + u32 wol:1; /* bit 5(WOL Event) */ + u32 rxmac_error:1; /* bit 6(RXMAC Error Indicator) */ + u32 drop:1; /* bit 7(Drop packet) */ + u32 ft:1; /* bit 8(Frame Truncated) */ + u32 jp:1; /* bit 9(Jumbo Packet) */ + u32 vp:1; /* bit 10(VLAN Packet) */ + u32 unused:5; /* bits 11-15 */ + u32 asw_prev_pkt_dropped:1;/* bit 16(e.g. IFG too small on previous) */ + u32 asw_RX_DV_event:1; /* bit 17(short receive event detected) */ + u32 asw_false_carrier_event:1; /* bit 18(bad carrier since last good packet) */ + u32 asw_code_err:1; /* bit 19(one or more nibbles signalled as errors) */ + u32 asw_CRC_err:1; /* bit 20(CRC error) */ + u32 asw_len_chk_err:1; /* bit 21(frame length field incorrect) */ + u32 asw_too_long:1; /* bit 22(frame length > 1518 bytes) */ + u32 asw_OK:1; /* bit 23(valid CRC + no code error) */ + u32 asw_multicast:1; /* bit 24(has a multicast address) */ + u32 asw_broadcast:1; /* bit 25(has a broadcast address) */ + u32 asw_dribble_nibble:1; /* bit 26(spurious bits after EOP) */ + u32 asw_control_frame:1; /* bit 27(is a control frame) */ + u32 asw_pause_frame:1; /* bit 28(is a pause frame) */ + u32 asw_unsupported_op:1; /* bit 29(unsupported OP code) */ + u32 asw_VLAN_tag:1; /* bit 30(VLAN tag detected) */ + u32 asw_long_evt:1; /* bit 31(Rx long event) */ #if 0 - u32 asw_trunc:1; // bit 31(Rx frame truncated) + u32 asw_trunc:1; /* bit 31(Rx frame truncated) */ #endif #endif } bits; @@ -188,15 +188,15 @@ typedef union _PKT_STAT_DESC_WORD1_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 unused:4; // bits 28-31 - u32 ri:2; // bits 26-27(Ring Index) - u32 bi:10; // bits 16-25(Buffer Index) - u32 length:16; // bit 0-15(length in bytes) + u32 unused:4; /* bits 28-31 */ + u32 ri:2; /* bits 26-27(Ring Index) */ + u32 bi:10; /* bits 16-25(Buffer Index) */ + u32 length:16; /* bit 0-15(length in bytes) */ #else - u32 length:16; // bit 0-15(length in bytes) - u32 bi:10; // bits 16-25(Buffer Index) - u32 ri:2; // bits 26-27(Ring Index) - u32 unused:4; // bits 28-31 + u32 length:16; /* bit 0-15(length in bytes) */ + u32 bi:10; /* bits 16-25(Buffer Index) */ + u32 ri:2; /* bits 26-27(Ring Index) */ + u32 unused:4; /* bits 28-31 */ #endif } bits; } PKT_STAT_DESC_WORD1_t, *PPKT_STAT_WORD1_t; @@ -217,19 +217,19 @@ typedef union _rxstat_word0_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 FBR1unused:5; // bits 27-31 - u32 FBR1wrap:1; // bit 26 - u32 FBR1offset:10; // bits 16-25 - u32 FBR0unused:5; // bits 11-15 - u32 FBR0wrap:1; // bit 10 - u32 FBR0offset:10; // bits 0-9 + u32 FBR1unused:5; /* bits 27-31 */ + u32 FBR1wrap:1; /* bit 26 */ + u32 FBR1offset:10; /* bits 16-25 */ + u32 FBR0unused:5; /* bits 11-15 */ + u32 FBR0wrap:1; /* bit 10 */ + u32 FBR0offset:10; /* bits 0-9 */ #else - u32 FBR0offset:10; // bits 0-9 - u32 FBR0wrap:1; // bit 10 - u32 FBR0unused:5; // bits 11-15 - u32 FBR1offset:10; // bits 16-25 - u32 FBR1wrap:1; // bit 26 - u32 FBR1unused:5; // bits 27-31 + u32 FBR0offset:10; /* bits 0-9 */ + u32 FBR0wrap:1; /* bit 10 */ + u32 FBR0unused:5; /* bits 11-15 */ + u32 FBR1offset:10; /* bits 16-25 */ + u32 FBR1wrap:1; /* bit 26 */ + u32 FBR1unused:5; /* bits 27-31 */ #endif } bits; } RXSTAT_WORD0_t, *PRXSTAT_WORD0_t; @@ -243,15 +243,15 @@ typedef union _rxstat_word1_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 PSRunused:3; // bits 29-31 - u32 PSRwrap:1; // bit 28 - u32 PSRoffset:12; // bits 16-27 - u32 reserved:16; // bits 0-15 + u32 PSRunused:3; /* bits 29-31 */ + u32 PSRwrap:1; /* bit 28 */ + u32 PSRoffset:12; /* bits 16-27 */ + u32 reserved:16; /* bits 0-15 */ #else - u32 reserved:16; // bits 0-15 - u32 PSRoffset:12; // bits 16-27 - u32 PSRwrap:1; // bit 28 - u32 PSRunused:3; // bits 29-31 + u32 reserved:16; /* bits 0-15 */ + u32 PSRoffset:12; /* bits 16-27 */ + u32 PSRwrap:1; /* bit 28 */ + u32 PSRunused:3; /* bits 29-31 */ #endif } bits; } RXSTAT_WORD1_t, *PRXSTAT_WORD1_t; @@ -302,7 +302,7 @@ typedef struct _rx_ring_t { dma_addr_t Fbr0MemPa[MAX_DESC_PER_RING_RX / FBR_CHUNKS]; uint64_t Fbr0Realpa; uint64_t Fbr0offset; - DMA10W_t local_Fbr0_full; + u32 local_Fbr0_full; u32 Fbr0NumEntries; u32 Fbr0BufferSize; #endif @@ -313,7 +313,7 @@ typedef struct _rx_ring_t { uint64_t Fbr1Realpa; uint64_t Fbr1offset; FBRLOOKUPTABLE *Fbr[2]; - DMA10W_t local_Fbr1_full; + u32 local_Fbr1_full; u32 Fbr1NumEntries; u32 Fbr1BufferSize; diff --git a/drivers/staging/et131x/et1310_tx.c b/drivers/staging/et131x/et1310_tx.c index 30eaac4..94f7752 100644 --- a/drivers/staging/et131x/et1310_tx.c +++ b/drivers/staging/et131x/et1310_tx.c @@ -2,7 +2,7 @@ * Agere Systems Inc. * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * http://www.agere.com * @@ -19,7 +19,7 @@ * software indicates your acceptance of these terms and conditions. If you do * not agree with these terms and conditions, do not use the software. * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * * Redistribution and use in source or binary forms, with or without @@ -40,7 +40,7 @@ * * Disclaimer * - * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN @@ -56,7 +56,6 @@ */ #include "et131x_version.h" -#include "et131x_debug.h" #include "et131x_defs.h" #include <linux/pci.h> @@ -74,9 +73,9 @@ #include <linux/interrupt.h> #include <linux/in.h> #include <linux/delay.h> -#include <asm/io.h> +#include <linux/io.h> +#include <linux/bitops.h> #include <asm/system.h> -#include <asm/bitops.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> @@ -94,18 +93,14 @@ #include "et1310_tx.h" -/* Data for debugging facilities */ -#ifdef CONFIG_ET131X_DEBUG -extern dbg_info_t *et131x_dbginfo; -#endif /* CONFIG_ET131X_DEBUG */ -static void et131x_update_tcb_list(struct et131x_adapter *pAdapter); -static void et131x_check_send_wait_list(struct et131x_adapter *pAdapter); -static inline void et131x_free_send_packet(struct et131x_adapter *pAdapter, +static void et131x_update_tcb_list(struct et131x_adapter *etdev); +static void et131x_check_send_wait_list(struct et131x_adapter *etdev); +static inline void et131x_free_send_packet(struct et131x_adapter *etdev, PMP_TCB pMpTcb); static int et131x_send_packet(struct sk_buff *skb, - struct et131x_adapter *pAdapter); -static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb); + struct et131x_adapter *etdev); +static int nic_send_packet(struct et131x_adapter *etdev, PMP_TCB pMpTcb); /** * et131x_tx_dma_memory_alloc @@ -124,14 +119,11 @@ int et131x_tx_dma_memory_alloc(struct et131x_adapter *adapter) int desc_size = 0; TX_RING_t *tx_ring = &adapter->TxRing; - DBG_ENTER(et131x_dbginfo); - /* Allocate memory for the TCB's (Transmit Control Block) */ - adapter->TxRing.MpTcbMem = (MP_TCB *) kcalloc(NUM_TCB, sizeof(MP_TCB), + adapter->TxRing.MpTcbMem = (MP_TCB *)kcalloc(NUM_TCB, sizeof(MP_TCB), GFP_ATOMIC | GFP_DMA); if (!adapter->TxRing.MpTcbMem) { - DBG_ERROR(et131x_dbginfo, "Cannot alloc memory for TCBs\n"); - DBG_LEAVE(et131x_dbginfo); + dev_err(&adapter->pdev->dev, "Cannot alloc memory for TCBs\n"); return -ENOMEM; } @@ -143,8 +135,7 @@ int et131x_tx_dma_memory_alloc(struct et131x_adapter *adapter) (PTX_DESC_ENTRY_t) pci_alloc_consistent(adapter->pdev, desc_size, &tx_ring->pTxDescRingPa); if (!adapter->TxRing.pTxDescRingVa) { - DBG_ERROR(et131x_dbginfo, "Cannot alloc memory for Tx Ring\n"); - DBG_LEAVE(et131x_dbginfo); + dev_err(&adapter->pdev->dev, "Cannot alloc memory for Tx Ring\n"); return -ENOMEM; } @@ -169,9 +160,8 @@ int et131x_tx_dma_memory_alloc(struct et131x_adapter *adapter) sizeof(TX_STATUS_BLOCK_t), &tx_ring->pTxStatusPa); if (!adapter->TxRing.pTxStatusPa) { - DBG_ERROR(et131x_dbginfo, - "Cannot alloc memory for Tx status block\n"); - DBG_LEAVE(et131x_dbginfo); + dev_err(&adapter->pdev->dev, + "Cannot alloc memory for Tx status block\n"); return -ENOMEM; } @@ -180,13 +170,11 @@ int et131x_tx_dma_memory_alloc(struct et131x_adapter *adapter) NIC_MIN_PACKET_SIZE, &tx_ring->pTxDummyBlkPa); if (!adapter->TxRing.pTxDummyBlkPa) { - DBG_ERROR(et131x_dbginfo, - "Cannot alloc memory for Tx dummy buffer\n"); - DBG_LEAVE(et131x_dbginfo); + dev_err(&adapter->pdev->dev, + "Cannot alloc memory for Tx dummy buffer\n"); return -ENOMEM; } - DBG_LEAVE(et131x_dbginfo); return 0; } @@ -200,8 +188,6 @@ void et131x_tx_dma_memory_free(struct et131x_adapter *adapter) { int desc_size = 0; - DBG_ENTER(et131x_dbginfo); - if (adapter->TxRing.pTxDescRingVa) { /* Free memory relating to Tx rings here */ adapter->TxRing.pTxDescRingVa -= adapter->TxRing.TxDescOffset; @@ -238,32 +224,25 @@ void et131x_tx_dma_memory_free(struct et131x_adapter *adapter) } /* Free the memory for MP_TCB structures */ - if (adapter->TxRing.MpTcbMem) { - kfree(adapter->TxRing.MpTcbMem); - adapter->TxRing.MpTcbMem = NULL; - } - - DBG_LEAVE(et131x_dbginfo); + kfree(adapter->TxRing.MpTcbMem); } /** * ConfigTxDmaRegs - Set up the tx dma section of the JAGCore. - * @adapter: pointer to our private adapter structure + * @etdev: pointer to our private adapter structure */ -void ConfigTxDmaRegs(struct et131x_adapter *pAdapter) +void ConfigTxDmaRegs(struct et131x_adapter *etdev) { - struct _TXDMA_t __iomem *pTxDma = &pAdapter->CSRAddress->txdma; - - DBG_ENTER(et131x_dbginfo); + struct _TXDMA_t __iomem *txdma = &etdev->regs->txdma; /* Load the hardware with the start of the transmit descriptor ring. */ - writel((uint32_t) (pAdapter->TxRing.pTxDescRingAdjustedPa >> 32), - &pTxDma->pr_base_hi); - writel((uint32_t) pAdapter->TxRing.pTxDescRingAdjustedPa, - &pTxDma->pr_base_lo); + writel((uint32_t) (etdev->TxRing.pTxDescRingAdjustedPa >> 32), + &txdma->pr_base_hi); + writel((uint32_t) etdev->TxRing.pTxDescRingAdjustedPa, + &txdma->pr_base_lo); /* Initialise the transmit DMA engine */ - writel(NUM_DESC_PER_RING_TX - 1, &pTxDma->pr_num_des.value); + writel(NUM_DESC_PER_RING_TX - 1, &txdma->pr_num_des.value); /* Load the completion writeback physical address * @@ -272,57 +251,44 @@ void ConfigTxDmaRegs(struct et131x_adapter *pAdapter) * are ever returned, make sure the high part is retrieved here before * storing the adjusted address. */ - writel(0, &pTxDma->dma_wb_base_hi); - writel(pAdapter->TxRing.pTxStatusPa, &pTxDma->dma_wb_base_lo); - - memset(pAdapter->TxRing.pTxStatusVa, 0, sizeof(TX_STATUS_BLOCK_t)); + writel(0, &txdma->dma_wb_base_hi); + writel(etdev->TxRing.pTxStatusPa, &txdma->dma_wb_base_lo); - writel(0, &pTxDma->service_request.value); - pAdapter->TxRing.txDmaReadyToSend.value = 0; + memset(etdev->TxRing.pTxStatusVa, 0, sizeof(TX_STATUS_BLOCK_t)); - DBG_LEAVE(et131x_dbginfo); + writel(0, &txdma->service_request); + etdev->TxRing.txDmaReadyToSend = 0; } /** * et131x_tx_dma_disable - Stop of Tx_DMA on the ET1310 - * @pAdapter: pointer to our adapter structure + * @etdev: pointer to our adapter structure */ -void et131x_tx_dma_disable(struct et131x_adapter *pAdapter) +void et131x_tx_dma_disable(struct et131x_adapter *etdev) { - DBG_ENTER(et131x_dbginfo); - /* Setup the tramsmit dma configuration register */ - writel(0x101, &pAdapter->CSRAddress->txdma.csr.value); - - DBG_LEAVE(et131x_dbginfo); + writel(ET_TXDMA_CSR_HALT|ET_TXDMA_SNGL_EPKT, + &etdev->regs->txdma.csr); } /** * et131x_tx_dma_enable - re-start of Tx_DMA on the ET1310. - * @pAdapter: pointer to our adapter structure + * @etdev: pointer to our adapter structure * * Mainly used after a return to the D0 (full-power) state from a lower state. */ -void et131x_tx_dma_enable(struct et131x_adapter *pAdapter) +void et131x_tx_dma_enable(struct et131x_adapter *etdev) { - DBG_ENTER(et131x_dbginfo); - - if (pAdapter->RegistryPhyLoopbk) { - /* TxDMA is disabled for loopback operation. */ - writel(0x101, &pAdapter->CSRAddress->txdma.csr.value); - } else { - TXDMA_CSR_t csr = { 0 }; - + u32 csr = ET_TXDMA_SNGL_EPKT; + if (etdev->RegistryPhyLoopbk) + /* TxDMA is disabled for loopback operation. */ + csr |= ET_TXDMA_CSR_HALT; + else /* Setup the transmit dma configuration register for normal * operation */ - csr.bits.sngl_epkt_mode = 1; - csr.bits.halt = 0; - csr.bits.cache_thrshld = pAdapter->RegistryDMACache; - writel(csr.value, &pAdapter->CSRAddress->txdma.csr.value); - } - - DBG_LEAVE(et131x_dbginfo); + csr |= PARM_DMA_CACHE_DEF << ET_TXDMA_CACHE_SHIFT; + writel(csr, &etdev->regs->txdma.csr); } /** @@ -335,8 +301,6 @@ void et131x_init_send(struct et131x_adapter *adapter) uint32_t TcbCount; TX_RING_t *tx_ring; - DBG_ENTER(et131x_dbginfo); - /* Setup some convenience pointers */ tx_ring = &adapter->TxRing; pMpTcb = adapter->TxRing.MpTcbMem; @@ -366,8 +330,6 @@ void et131x_init_send(struct et131x_adapter *adapter) tx_ring->CurrSendTail = (PMP_TCB) NULL; INIT_LIST_HEAD(&adapter->TxRing.SendWaitQueue); - - DBG_LEAVE(et131x_dbginfo); } /** @@ -380,11 +342,9 @@ void et131x_init_send(struct et131x_adapter *adapter) int et131x_send_packets(struct sk_buff *skb, struct net_device *netdev) { int status = 0; - struct et131x_adapter *pAdapter = NULL; - - DBG_TX_ENTER(et131x_dbginfo); + struct et131x_adapter *etdev = NULL; - pAdapter = netdev_priv(netdev); + etdev = netdev_priv(netdev); /* Send these packets * @@ -393,30 +353,29 @@ int et131x_send_packets(struct sk_buff *skb, struct net_device *netdev) */ /* Queue is not empty or TCB is not available */ - if (!list_empty(&pAdapter->TxRing.SendWaitQueue) || - MP_TCB_RESOURCES_NOT_AVAILABLE(pAdapter)) { + if (!list_empty(&etdev->TxRing.SendWaitQueue) || + MP_TCB_RESOURCES_NOT_AVAILABLE(etdev)) { /* NOTE: If there's an error on send, no need to queue the * packet under Linux; if we just send an error up to the * netif layer, it will resend the skb to us. */ - DBG_VERBOSE(et131x_dbginfo, "TCB Resources Not Available\n"); status = -ENOMEM; } else { /* We need to see if the link is up; if it's not, make the * netif layer think we're good and drop the packet */ - //if( MP_SHOULD_FAIL_SEND( pAdapter ) || pAdapter->DriverNoPhyAccess ) - if (MP_SHOULD_FAIL_SEND(pAdapter) || pAdapter->DriverNoPhyAccess + /* + * if( MP_SHOULD_FAIL_SEND( etdev ) || + * etdev->DriverNoPhyAccess ) + */ + if (MP_SHOULD_FAIL_SEND(etdev) || etdev->DriverNoPhyAccess || !netif_carrier_ok(netdev)) { - DBG_VERBOSE(et131x_dbginfo, - "Can't Tx, Link is DOWN; drop the packet\n"); - dev_kfree_skb_any(skb); skb = NULL; - pAdapter->net_stats.tx_dropped++; + etdev->net_stats.tx_dropped++; } else { - status = et131x_send_packet(skb, pAdapter); + status = et131x_send_packet(skb, etdev); if (status == -ENOMEM) { @@ -425,147 +384,113 @@ int et131x_send_packets(struct sk_buff *skb, struct net_device *netdev) * send an error up to the netif layer, it * will resend the skb to us. */ - DBG_WARNING(et131x_dbginfo, - "Resources problem, Queue tx packet\n"); } else if (status != 0) { /* On any other error, make netif think we're * OK and drop the packet */ - DBG_WARNING(et131x_dbginfo, - "General error, drop packet\n"); - dev_kfree_skb_any(skb); skb = NULL; - - pAdapter->net_stats.tx_dropped++; + etdev->net_stats.tx_dropped++; } } } - - DBG_TX_LEAVE(et131x_dbginfo); return status; } /** * et131x_send_packet - Do the work to send a packet * @skb: the packet(s) to send - * @pAdapter: a pointer to the device's private adapter structure + * @etdev: a pointer to the device's private adapter structure * * Return 0 in almost all cases; non-zero value in extreme hard failure only. * * Assumption: Send spinlock has been acquired */ static int et131x_send_packet(struct sk_buff *skb, - struct et131x_adapter *pAdapter) + struct et131x_adapter *etdev) { int status = 0; PMP_TCB pMpTcb = NULL; - uint16_t *pShBufVa; - unsigned long lockflags; - - DBG_TX_ENTER(et131x_dbginfo); - - /* Is our buffer scattered, or continuous? */ - if (skb_shinfo(skb)->nr_frags == 0) { - DBG_TX(et131x_dbginfo, "Scattered buffer: NO\n"); - } else { - DBG_TX(et131x_dbginfo, "Scattered buffer: YES, Num Frags: %d\n", - skb_shinfo(skb)->nr_frags); - } + uint16_t *shbufva; + unsigned long flags; /* All packets must have at least a MAC address and a protocol type */ if (skb->len < ETH_HLEN) { - DBG_ERROR(et131x_dbginfo, - "Packet size < ETH_HLEN (14 bytes)\n"); - DBG_LEAVE(et131x_dbginfo); return -EIO; } /* Get a TCB for this packet */ - spin_lock_irqsave(&pAdapter->TCBReadyQLock, lockflags); + spin_lock_irqsave(&etdev->TCBReadyQLock, flags); - pMpTcb = pAdapter->TxRing.TCBReadyQueueHead; + pMpTcb = etdev->TxRing.TCBReadyQueueHead; if (pMpTcb == NULL) { - spin_unlock_irqrestore(&pAdapter->TCBReadyQLock, lockflags); - - DBG_WARNING(et131x_dbginfo, "Can't obtain a TCB\n"); - DBG_TX_LEAVE(et131x_dbginfo); + spin_unlock_irqrestore(&etdev->TCBReadyQLock, flags); return -ENOMEM; } - pAdapter->TxRing.TCBReadyQueueHead = pMpTcb->Next; + etdev->TxRing.TCBReadyQueueHead = pMpTcb->Next; - if (pAdapter->TxRing.TCBReadyQueueHead == NULL) { - pAdapter->TxRing.TCBReadyQueueTail = NULL; - } + if (etdev->TxRing.TCBReadyQueueHead == NULL) + etdev->TxRing.TCBReadyQueueTail = NULL; - spin_unlock_irqrestore(&pAdapter->TCBReadyQLock, lockflags); + spin_unlock_irqrestore(&etdev->TCBReadyQLock, flags); pMpTcb->PacketLength = skb->len; pMpTcb->Packet = skb; if ((skb->data != NULL) && ((skb->len - skb->data_len) >= 6)) { - pShBufVa = (uint16_t *) skb->data; + shbufva = (uint16_t *) skb->data; - if ((pShBufVa[0] == 0xffff) && - (pShBufVa[1] == 0xffff) && (pShBufVa[2] == 0xffff)) { - MP_SET_FLAG(pMpTcb, fMP_DEST_BROAD); - } else if ((pShBufVa[0] & 0x3) == 0x0001) { - MP_SET_FLAG(pMpTcb, fMP_DEST_MULTI); + if ((shbufva[0] == 0xffff) && + (shbufva[1] == 0xffff) && (shbufva[2] == 0xffff)) { + pMpTcb->Flags |= fMP_DEST_BROAD; + } else if ((shbufva[0] & 0x3) == 0x0001) { + pMpTcb->Flags |= fMP_DEST_MULTI; } } pMpTcb->Next = NULL; /* Call the NIC specific send handler. */ - if (status == 0) { - status = nic_send_packet(pAdapter, pMpTcb); - } + if (status == 0) + status = nic_send_packet(etdev, pMpTcb); if (status != 0) { - spin_lock_irqsave(&pAdapter->TCBReadyQLock, lockflags); + spin_lock_irqsave(&etdev->TCBReadyQLock, flags); - if (pAdapter->TxRing.TCBReadyQueueTail) { - pAdapter->TxRing.TCBReadyQueueTail->Next = pMpTcb; + if (etdev->TxRing.TCBReadyQueueTail) { + etdev->TxRing.TCBReadyQueueTail->Next = pMpTcb; } else { /* Apparently ready Q is empty. */ - pAdapter->TxRing.TCBReadyQueueHead = pMpTcb; + etdev->TxRing.TCBReadyQueueHead = pMpTcb; } - pAdapter->TxRing.TCBReadyQueueTail = pMpTcb; - - spin_unlock_irqrestore(&pAdapter->TCBReadyQLock, lockflags); - - DBG_TX_LEAVE(et131x_dbginfo); + etdev->TxRing.TCBReadyQueueTail = pMpTcb; + spin_unlock_irqrestore(&etdev->TCBReadyQLock, flags); return status; } - - DBG_ASSERT(pAdapter->TxRing.nBusySend <= NUM_TCB); - - DBG_TX_LEAVE(et131x_dbginfo); + WARN_ON(etdev->TxRing.nBusySend > NUM_TCB); return 0; } /** * nic_send_packet - NIC specific send handler for version B silicon. - * @pAdapter: pointer to our adapter + * @etdev: pointer to our adapter * @pMpTcb: pointer to MP_TCB * * Returns 0 or errno. */ -static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) +static int nic_send_packet(struct et131x_adapter *etdev, PMP_TCB pMpTcb) { uint32_t loopIndex; TX_DESC_ENTRY_t CurDesc[24]; uint32_t FragmentNumber = 0; - uint32_t iThisCopy, iRemainder; + uint32_t thiscopy, remainder; struct sk_buff *pPacket = pMpTcb->Packet; uint32_t FragListCount = skb_shinfo(pPacket)->nr_frags + 1; struct skb_frag_struct *pFragList = &skb_shinfo(pPacket)->frags[0]; - unsigned long lockflags1, lockflags2; - - DBG_TX_ENTER(et131x_dbginfo); + unsigned long flags; /* Part of the optimizations of this send routine restrict us to * sending 24 fragments at a pass. In practice we should never see @@ -576,7 +501,6 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) * although it is less efficient. */ if (FragListCount > 23) { - DBG_TX_LEAVE(et131x_dbginfo); return -EIO; } @@ -597,16 +521,7 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) * doesn't seem to like large fragments. */ if ((pPacket->len - pPacket->data_len) <= 1514) { - DBG_TX(et131x_dbginfo, - "Got packet of length %d, " - "filling desc entry %d, " - "TCB: 0x%p\n", - (pPacket->len - pPacket->data_len), - pAdapter->TxRing.txDmaReadyToSend.bits. - val, pMpTcb); - CurDesc[FragmentNumber].DataBufferPtrHigh = 0; - CurDesc[FragmentNumber].word2.bits. length_in_bytes = pPacket->len - pPacket->data_len; @@ -620,22 +535,13 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) * subsystem) */ CurDesc[FragmentNumber++].DataBufferPtrLow = - pci_map_single(pAdapter->pdev, + pci_map_single(etdev->pdev, pPacket->data, pPacket->len - pPacket->data_len, PCI_DMA_TODEVICE); } else { - DBG_TX(et131x_dbginfo, - "Got packet of length %d, " - "filling desc entry %d, " - "TCB: 0x%p\n", - (pPacket->len - pPacket->data_len), - pAdapter->TxRing.txDmaReadyToSend.bits. - val, pMpTcb); - CurDesc[FragmentNumber].DataBufferPtrHigh = 0; - CurDesc[FragmentNumber].word2.bits. length_in_bytes = ((pPacket->len - pPacket->data_len) / 2); @@ -649,7 +555,7 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) * subsystem) */ CurDesc[FragmentNumber++].DataBufferPtrLow = - pci_map_single(pAdapter->pdev, + pci_map_single(etdev->pdev, pPacket->data, ((pPacket->len - pPacket->data_len) / 2), @@ -669,7 +575,7 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) * subsystem) */ CurDesc[FragmentNumber++].DataBufferPtrLow = - pci_map_single(pAdapter->pdev, + pci_map_single(etdev->pdev, pPacket->data + ((pPacket->len - pPacket->data_len) / 2), @@ -678,16 +584,7 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) PCI_DMA_TODEVICE); } } else { - DBG_TX(et131x_dbginfo, - "Got packet of length %d," - "filling desc entry %d\n" - "TCB: 0x%p\n", - pFragList[loopIndex].size, - pAdapter->TxRing.txDmaReadyToSend.bits.val, - pMpTcb); - CurDesc[FragmentNumber].DataBufferPtrHigh = 0; - CurDesc[FragmentNumber].word2.bits.length_in_bytes = pFragList[loopIndex - 1].size; @@ -698,7 +595,7 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) * addressable (as defined by the pci/dma subsystem) */ CurDesc[FragmentNumber++].DataBufferPtrLow = - pci_map_page(pAdapter->pdev, + pci_map_page(etdev->pdev, pFragList[loopIndex - 1].page, pFragList[loopIndex - 1].page_offset, pFragList[loopIndex - 1].size, @@ -706,16 +603,14 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) } } - if (FragmentNumber == 0) { - DBG_WARNING(et131x_dbginfo, "No. frags is 0\n"); + if (FragmentNumber == 0) return -EIO; - } - if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) { - if (++pAdapter->TxRing.TxPacketsSinceLastinterrupt == - pAdapter->RegistryTxNumBuffers) { + if (etdev->linkspeed == TRUEPHY_SPEED_1000MBPS) { + if (++etdev->TxRing.TxPacketsSinceLastinterrupt == + PARM_TX_NUM_BUFS_DEF) { CurDesc[FragmentNumber - 1].word3.value = 0x5; - pAdapter->TxRing.TxPacketsSinceLastinterrupt = 0; + etdev->TxRing.TxPacketsSinceLastinterrupt = 0; } else { CurDesc[FragmentNumber - 1].word3.value = 0x1; } @@ -725,529 +620,101 @@ static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) CurDesc[0].word3.bits.f = 1; - pMpTcb->WrIndexStart = pAdapter->TxRing.txDmaReadyToSend; + pMpTcb->WrIndexStart = etdev->TxRing.txDmaReadyToSend; pMpTcb->PacketStaleCount = 0; - spin_lock_irqsave(&pAdapter->SendHWLock, lockflags1); + spin_lock_irqsave(&etdev->SendHWLock, flags); - iThisCopy = - NUM_DESC_PER_RING_TX - pAdapter->TxRing.txDmaReadyToSend.bits.val; + thiscopy = NUM_DESC_PER_RING_TX - + INDEX10(etdev->TxRing.txDmaReadyToSend); - if (iThisCopy >= FragmentNumber) { - iRemainder = 0; - iThisCopy = FragmentNumber; + if (thiscopy >= FragmentNumber) { + remainder = 0; + thiscopy = FragmentNumber; } else { - iRemainder = FragmentNumber - iThisCopy; + remainder = FragmentNumber - thiscopy; } - memcpy(pAdapter->TxRing.pTxDescRingVa + - pAdapter->TxRing.txDmaReadyToSend.bits.val, CurDesc, - sizeof(TX_DESC_ENTRY_t) * iThisCopy); + memcpy(etdev->TxRing.pTxDescRingVa + + INDEX10(etdev->TxRing.txDmaReadyToSend), CurDesc, + sizeof(TX_DESC_ENTRY_t) * thiscopy); - pAdapter->TxRing.txDmaReadyToSend.bits.val += iThisCopy; + add_10bit(&etdev->TxRing.txDmaReadyToSend, thiscopy); - if ((pAdapter->TxRing.txDmaReadyToSend.bits.val == 0) || - (pAdapter->TxRing.txDmaReadyToSend.bits.val == - NUM_DESC_PER_RING_TX)) { - if (pAdapter->TxRing.txDmaReadyToSend.bits.wrap) { - pAdapter->TxRing.txDmaReadyToSend.value = 0; - } else { - pAdapter->TxRing.txDmaReadyToSend.value = 0x400; - } + if (INDEX10(etdev->TxRing.txDmaReadyToSend)== 0 || + INDEX10(etdev->TxRing.txDmaReadyToSend) == NUM_DESC_PER_RING_TX) { + etdev->TxRing.txDmaReadyToSend &= ~ET_DMA10_MASK; + etdev->TxRing.txDmaReadyToSend ^= ET_DMA10_WRAP; } - if (iRemainder) { - memcpy(pAdapter->TxRing.pTxDescRingVa, - CurDesc + iThisCopy, - sizeof(TX_DESC_ENTRY_t) * iRemainder); + if (remainder) { + memcpy(etdev->TxRing.pTxDescRingVa, + CurDesc + thiscopy, + sizeof(TX_DESC_ENTRY_t) * remainder); - pAdapter->TxRing.txDmaReadyToSend.bits.val += iRemainder; + add_10bit(&etdev->TxRing.txDmaReadyToSend, remainder); } - if (pAdapter->TxRing.txDmaReadyToSend.bits.val == 0) { - if (pAdapter->TxRing.txDmaReadyToSend.value) { - pMpTcb->WrIndex.value = NUM_DESC_PER_RING_TX - 1; - } else { - pMpTcb->WrIndex.value = - 0x400 | (NUM_DESC_PER_RING_TX - 1); - } - } else { - pMpTcb->WrIndex.value = - pAdapter->TxRing.txDmaReadyToSend.value - 1; - } + if (INDEX10(etdev->TxRing.txDmaReadyToSend) == 0) { + if (etdev->TxRing.txDmaReadyToSend) + pMpTcb->WrIndex = NUM_DESC_PER_RING_TX - 1; + else + pMpTcb->WrIndex= ET_DMA10_WRAP | (NUM_DESC_PER_RING_TX - 1); + } else + pMpTcb->WrIndex = etdev->TxRing.txDmaReadyToSend - 1; - spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags2); + spin_lock(&etdev->TCBSendQLock); - if (pAdapter->TxRing.CurrSendTail) { - pAdapter->TxRing.CurrSendTail->Next = pMpTcb; - } else { - pAdapter->TxRing.CurrSendHead = pMpTcb; - } + if (etdev->TxRing.CurrSendTail) + etdev->TxRing.CurrSendTail->Next = pMpTcb; + else + etdev->TxRing.CurrSendHead = pMpTcb; - pAdapter->TxRing.CurrSendTail = pMpTcb; + etdev->TxRing.CurrSendTail = pMpTcb; - DBG_ASSERT(pMpTcb->Next == NULL); + WARN_ON(pMpTcb->Next != NULL); - pAdapter->TxRing.nBusySend++; + etdev->TxRing.nBusySend++; - spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags2); + spin_unlock(&etdev->TCBSendQLock); /* Write the new write pointer back to the device. */ - writel(pAdapter->TxRing.txDmaReadyToSend.value, - &pAdapter->CSRAddress->txdma.service_request.value); + writel(etdev->TxRing.txDmaReadyToSend, + &etdev->regs->txdma.service_request); /* For Gig only, we use Tx Interrupt coalescing. Enable the software * timer to wake us up if this packet isn't followed by N more. */ - if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) { - writel(pAdapter->RegistryTxTimeInterval * NANO_IN_A_MICRO, - &pAdapter->CSRAddress->global.watchdog_timer); + if (etdev->linkspeed == TRUEPHY_SPEED_1000MBPS) { + writel(PARM_TX_TIME_INT_DEF * NANO_IN_A_MICRO, + &etdev->regs->global.watchdog_timer); } + spin_unlock_irqrestore(&etdev->SendHWLock, flags); - spin_unlock_irqrestore(&pAdapter->SendHWLock, lockflags1); - - DBG_TX_LEAVE(et131x_dbginfo); return 0; } -/* - * NOTE: For now, keep this older version of NICSendPacket around for - * reference, even though it's not used - */ -#if 0 - -/** - * NICSendPacket - NIC specific send handler. - * @pAdapter: pointer to our adapter - * @pMpTcb: pointer to MP_TCB - * - * Returns 0 on succes, errno on failure. - * - * This version of the send routine is designed for version A silicon. - * Assumption - Send spinlock has been acquired. - */ -static int nic_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) -{ - uint32_t loopIndex, fragIndex, loopEnd; - uint32_t iSplitFirstElement = 0; - uint32_t SegmentSize = 0; - TX_DESC_ENTRY_t CurDesc; - TX_DESC_ENTRY_t *CurDescPostCopy = NULL; - uint32_t SlotsAvailable; - DMA10W_t ServiceComplete; - unsigned int lockflags1, lockflags2; - struct sk_buff *pPacket = pMpTcb->Packet; - uint32_t FragListCount = skb_shinfo(pPacket)->nr_frags + 1; - struct skb_frag_struct *pFragList = &skb_shinfo(pPacket)->frags[0]; - - DBG_TX_ENTER(et131x_dbginfo); - - ServiceComplete.value = - readl(&pAdapter->CSRAddress->txdma.NewServiceComplete.value); - - /* - * Attempt to fix TWO hardware bugs: - * 1) NEVER write an odd number of descriptors. - * 2) If packet length is less than NIC_MIN_PACKET_SIZE, then pad the - * packet to NIC_MIN_PACKET_SIZE bytes by adding a new last - * descriptor IN HALF DUPLEX MODE ONLY - * NOTE that (2) interacts with (1). If the packet is less than - * NIC_MIN_PACKET_SIZE bytes then we will append a descriptor. - * Therefore if it is even now, it will eventually end up odd, and - * so will need adjusting. - * - * VLAN tags get involved since VLAN tags add another one or two - * segments. - */ - DBG_TX(et131x_dbginfo, - "pMpTcb->PacketLength: %d\n", pMpTcb->PacketLength); - - if ((pAdapter->uiDuplexMode == 0) - && (pMpTcb->PacketLength < NIC_MIN_PACKET_SIZE)) { - DBG_TX(et131x_dbginfo, - "HALF DUPLEX mode AND len < MIN_PKT_SIZE\n"); - if ((FragListCount & 0x1) == 0) { - DBG_TX(et131x_dbginfo, - "Even number of descs, split 1st elem\n"); - iSplitFirstElement = 1; - //SegmentSize = pFragList[0].size / 2; - SegmentSize = (pPacket->len - pPacket->data_len) / 2; - } - } else if (FragListCount & 0x1) { - DBG_TX(et131x_dbginfo, "Odd number of descs, split 1st elem\n"); - - iSplitFirstElement = 1; - //SegmentSize = pFragList[0].size / 2; - SegmentSize = (pPacket->len - pPacket->data_len) / 2; - } - - spin_lock_irqsave(&pAdapter->SendHWLock, lockflags1); - - if (pAdapter->TxRing.txDmaReadyToSend.bits.serv_req_wrap == - ServiceComplete.bits.serv_cpl_wrap) { - /* The ring hasn't wrapped. Slots available should be - * (RING_SIZE) - the difference between the two pointers. - */ - SlotsAvailable = NUM_DESC_PER_RING_TX - - (pAdapter->TxRing.txDmaReadyToSend.bits.serv_req - - ServiceComplete.bits.serv_cpl); - } else { - /* The ring has wrapped. Slots available should be the - * difference between the two pointers. - */ - SlotsAvailable = ServiceComplete.bits.serv_cpl - - pAdapter->TxRing.txDmaReadyToSend.bits.serv_req; - } - - if ((FragListCount + iSplitFirstElement) > SlotsAvailable) { - DBG_WARNING(et131x_dbginfo, - "Not Enough Space in Tx Desc Ring\n"); - spin_unlock_irqrestore(&pAdapter->SendHWLock, lockflags1); - return -ENOMEM; - } - - loopEnd = (FragListCount) + iSplitFirstElement; - fragIndex = 0; - - DBG_TX(et131x_dbginfo, - "TCB : 0x%p\n" - "Packet (SKB) : 0x%p\t Packet->len: %d\t Packet->data_len: %d\n" - "FragListCount : %d\t iSplitFirstElement: %d\t loopEnd:%d\n", - pMpTcb, - pPacket, pPacket->len, pPacket->data_len, - FragListCount, iSplitFirstElement, loopEnd); - - for (loopIndex = 0; loopIndex < loopEnd; loopIndex++) { - if (loopIndex > iSplitFirstElement) { - fragIndex++; - } - - DBG_TX(et131x_dbginfo, - "In loop, loopIndex: %d\t fragIndex: %d\n", loopIndex, - fragIndex); - - /* If there is something in this element, let's get a - * descriptor from the ring and get the necessary data - */ - DBG_TX(et131x_dbginfo, - "Packet Length %d," - "filling desc entry %d\n", - pPacket->len, - pAdapter->TxRing.txDmaReadyToSend.bits.serv_req); - - // NOTE - Should we do a paranoia check here to make sure the fragment - // actually has a length? It's HIGHLY unlikely the fragment would - // contain no data... - if (1) { - // NOTE - Currently always getting 32-bit addrs, and dma_addr_t is - // only 32-bit, so leave "high" ptr value out for now - CurDesc.DataBufferPtrHigh = 0; - - CurDesc.word2.value = 0; - CurDesc.word3.value = 0; - - if (fragIndex == 0) { - if (iSplitFirstElement) { - DBG_TX(et131x_dbginfo, - "Split first element: YES\n"); - - if (loopIndex == 0) { - DBG_TX(et131x_dbginfo, - "Got fragment of length %d, fragIndex: %d\n", - pPacket->len - - pPacket->data_len, - fragIndex); - DBG_TX(et131x_dbginfo, - "SegmentSize: %d\n", - SegmentSize); - - CurDesc.word2.bits. - length_in_bytes = - SegmentSize; - CurDesc.DataBufferPtrLow = - pci_map_single(pAdapter-> - pdev, - pPacket-> - data, - SegmentSize, - PCI_DMA_TODEVICE); - DBG_TX(et131x_dbginfo, - "pci_map_single() returns: 0x%08x\n", - CurDesc. - DataBufferPtrLow); - } else { - DBG_TX(et131x_dbginfo, - "Got fragment of length %d, fragIndex: %d\n", - pPacket->len - - pPacket->data_len, - fragIndex); - DBG_TX(et131x_dbginfo, - "Leftover Size: %d\n", - (pPacket->len - - pPacket->data_len - - SegmentSize)); - - CurDesc.word2.bits. - length_in_bytes = - ((pPacket->len - - pPacket->data_len) - - SegmentSize); - CurDesc.DataBufferPtrLow = - pci_map_single(pAdapter-> - pdev, - (pPacket-> - data + - SegmentSize), - (pPacket-> - len - - pPacket-> - data_len - - SegmentSize), - PCI_DMA_TODEVICE); - DBG_TX(et131x_dbginfo, - "pci_map_single() returns: 0x%08x\n", - CurDesc. - DataBufferPtrLow); - } - } else { - DBG_TX(et131x_dbginfo, - "Split first element: NO\n"); - - CurDesc.word2.bits.length_in_bytes = - pPacket->len - pPacket->data_len; - - CurDesc.DataBufferPtrLow = - pci_map_single(pAdapter->pdev, - pPacket->data, - (pPacket->len - - pPacket->data_len), - PCI_DMA_TODEVICE); - DBG_TX(et131x_dbginfo, - "pci_map_single() returns: 0x%08x\n", - CurDesc.DataBufferPtrLow); - } - } else { - - CurDesc.word2.bits.length_in_bytes = - pFragList[fragIndex - 1].size; - CurDesc.DataBufferPtrLow = - pci_map_page(pAdapter->pdev, - pFragList[fragIndex - 1].page, - pFragList[fragIndex - - 1].page_offset, - pFragList[fragIndex - 1].size, - PCI_DMA_TODEVICE); - DBG_TX(et131x_dbginfo, - "pci_map_page() returns: 0x%08x\n", - CurDesc.DataBufferPtrLow); - } - - if (loopIndex == 0) { - /* This is the first descriptor of the packet - * - * Set the "f" bit to indicate this is the - * first descriptor in the packet. - */ - DBG_TX(et131x_dbginfo, - "This is our FIRST descriptor\n"); - CurDesc.word3.bits.f = 1; - - pMpTcb->WrIndexStart = - pAdapter->TxRing.txDmaReadyToSend; - } - - if ((loopIndex == (loopEnd - 1)) && - (pAdapter->uiDuplexMode || - (pMpTcb->PacketLength >= NIC_MIN_PACKET_SIZE))) { - /* This is the Last descriptor of the packet */ - DBG_TX(et131x_dbginfo, - "THIS is our LAST descriptor\n"); - - if (pAdapter->uiLinkSpeed == - TRUEPHY_SPEED_1000MBPS) { - if (++pAdapter->TxRing. - TxPacketsSinceLastinterrupt >= - pAdapter->RegistryTxNumBuffers) { - CurDesc.word3.value = 0x5; - pAdapter->TxRing. - TxPacketsSinceLastinterrupt - = 0; - } else { - CurDesc.word3.value = 0x1; - } - } else { - CurDesc.word3.value = 0x5; - } - - /* Following index will be used during freeing - * of packet - */ - pMpTcb->WrIndex = - pAdapter->TxRing.txDmaReadyToSend; - pMpTcb->PacketStaleCount = 0; - } - - /* Copy the descriptor (filled above) into the - * descriptor ring at the next free entry. Advance - * the "next free entry" variable - */ - memcpy(pAdapter->TxRing.pTxDescRingVa + - pAdapter->TxRing.txDmaReadyToSend.bits.serv_req, - &CurDesc, sizeof(TX_DESC_ENTRY_t)); - - CurDescPostCopy = - pAdapter->TxRing.pTxDescRingVa + - pAdapter->TxRing.txDmaReadyToSend.bits.serv_req; - - DBG_TX(et131x_dbginfo, - "CURRENT DESCRIPTOR\n" - "\tAddress : 0x%p\n" - "\tDataBufferPtrHigh : 0x%08x\n" - "\tDataBufferPtrLow : 0x%08x\n" - "\tword2 : 0x%08x\n" - "\tword3 : 0x%08x\n", - CurDescPostCopy, - CurDescPostCopy->DataBufferPtrHigh, - CurDescPostCopy->DataBufferPtrLow, - CurDescPostCopy->word2.value, - CurDescPostCopy->word3.value); - - if (++pAdapter->TxRing.txDmaReadyToSend.bits.serv_req >= - NUM_DESC_PER_RING_TX) { - if (pAdapter->TxRing.txDmaReadyToSend.bits. - serv_req_wrap) { - pAdapter->TxRing.txDmaReadyToSend. - value = 0; - } else { - pAdapter->TxRing.txDmaReadyToSend. - value = 0x400; - } - } - } - } - - if (pAdapter->uiDuplexMode == 0 && - pMpTcb->PacketLength < NIC_MIN_PACKET_SIZE) { - // NOTE - Same 32/64-bit issue as above... - CurDesc.DataBufferPtrHigh = 0x0; - CurDesc.DataBufferPtrLow = pAdapter->TxRing.pTxDummyBlkPa; - CurDesc.word2.value = 0; - - if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) { - if (++pAdapter->TxRing.TxPacketsSinceLastinterrupt >= - pAdapter->RegistryTxNumBuffers) { - CurDesc.word3.value = 0x5; - pAdapter->TxRing.TxPacketsSinceLastinterrupt = - 0; - } else { - CurDesc.word3.value = 0x1; - } - } else { - CurDesc.word3.value = 0x5; - } - - CurDesc.word2.bits.length_in_bytes = - NIC_MIN_PACKET_SIZE - pMpTcb->PacketLength; - - pMpTcb->WrIndex = pAdapter->TxRing.txDmaReadyToSend; - - memcpy(pAdapter->TxRing.pTxDescRingVa + - pAdapter->TxRing.txDmaReadyToSend.bits.serv_req, - &CurDesc, sizeof(TX_DESC_ENTRY_t)); - - CurDescPostCopy = - pAdapter->TxRing.pTxDescRingVa + - pAdapter->TxRing.txDmaReadyToSend.bits.serv_req; - - DBG_TX(et131x_dbginfo, - "CURRENT DESCRIPTOR\n" - "\tAddress : 0x%p\n" - "\tDataBufferPtrHigh : 0x%08x\n" - "\tDataBufferPtrLow : 0x%08x\n" - "\tword2 : 0x%08x\n" - "\tword3 : 0x%08x\n", - CurDescPostCopy, - CurDescPostCopy->DataBufferPtrHigh, - CurDescPostCopy->DataBufferPtrLow, - CurDescPostCopy->word2.value, - CurDescPostCopy->word3.value); - - if (++pAdapter->TxRing.txDmaReadyToSend.bits.serv_req >= - NUM_DESC_PER_RING_TX) { - if (pAdapter->TxRing.txDmaReadyToSend.bits. - serv_req_wrap) { - pAdapter->TxRing.txDmaReadyToSend.value = 0; - } else { - pAdapter->TxRing.txDmaReadyToSend.value = 0x400; - } - } - - DBG_TX(et131x_dbginfo, "Padding descriptor %d by %d bytes\n", - //pAdapter->TxRing.txDmaReadyToSend.value, - pAdapter->TxRing.txDmaReadyToSend.bits.serv_req, - NIC_MIN_PACKET_SIZE - pMpTcb->PacketLength); - } - - spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags2); - - if (pAdapter->TxRing.CurrSendTail) { - pAdapter->TxRing.CurrSendTail->Next = pMpTcb; - } else { - pAdapter->TxRing.CurrSendHead = pMpTcb; - } - - pAdapter->TxRing.CurrSendTail = pMpTcb; - - DBG_ASSERT(pMpTcb->Next == NULL); - - pAdapter->TxRing.nBusySend++; - - spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags2); - - /* Write the new write pointer back to the device. */ - writel(pAdapter->TxRing.txDmaReadyToSend.value, - &pAdapter->CSRAddress->txdma.service_request.value); - -#ifdef CONFIG_ET131X_DEBUG - DumpDeviceBlock(DBG_TX_ON, pAdapter, 1); -#endif - - /* For Gig only, we use Tx Interrupt coalescing. Enable the software - * timer to wake us up if this packet isn't followed by N more. - */ - if (pAdapter->uiLinkSpeed == TRUEPHY_SPEED_1000MBPS) { - writel(pAdapter->RegistryTxTimeInterval * NANO_IN_A_MICRO, - &pAdapter->CSRAddress->global.watchdog_timer); - } - - spin_unlock_irqrestore(&pAdapter->SendHWLock, lockflags1); - - DBG_TX_LEAVE(et131x_dbginfo); - return 0; -} - -#endif /** * et131x_free_send_packet - Recycle a MP_TCB, complete the packet if necessary - * @pAdapter: pointer to our adapter + * @etdev: pointer to our adapter * @pMpTcb: pointer to MP_TCB * * Assumption - Send spinlock has been acquired */ -__inline void et131x_free_send_packet(struct et131x_adapter *pAdapter, PMP_TCB pMpTcb) +inline void et131x_free_send_packet(struct et131x_adapter *etdev, + PMP_TCB pMpTcb) { - unsigned long lockflags; + unsigned long flags; TX_DESC_ENTRY_t *desc = NULL; - struct net_device_stats *stats = &pAdapter->net_stats; + struct net_device_stats *stats = &etdev->net_stats; - if (MP_TEST_FLAG(pMpTcb, fMP_DEST_BROAD)) { - atomic_inc(&pAdapter->Stats.brdcstxmt); - } else if (MP_TEST_FLAG(pMpTcb, fMP_DEST_MULTI)) { - atomic_inc(&pAdapter->Stats.multixmt); - } else { - atomic_inc(&pAdapter->Stats.unixmt); - } + if (pMpTcb->Flags & fMP_DEST_BROAD) + atomic_inc(&etdev->Stats.brdcstxmt); + else if (pMpTcb->Flags & fMP_DEST_MULTI) + atomic_inc(&etdev->Stats.multixmt); + else + atomic_inc(&etdev->Stats.unixmt); if (pMpTcb->Packet) { stats->tx_bytes += pMpTcb->Packet->len; @@ -1256,60 +723,23 @@ __inline void et131x_free_send_packet(struct et131x_adapter *pAdapter, PMP_TCB p * corresponding to this packet and umap the fragments * they point to */ - DBG_TX(et131x_dbginfo, - "Unmap descriptors Here\n" - "TCB : 0x%p\n" - "TCB Next : 0x%p\n" - "TCB PacketLength : %d\n" - "TCB WrIndex.value : 0x%08x\n" - "TCB WrIndex.bits.val : %d\n" - "TCB WrIndex.value : 0x%08x\n" - "TCB WrIndex.bits.val : %d\n", - pMpTcb, - pMpTcb->Next, - pMpTcb->PacketLength, - pMpTcb->WrIndexStart.value, - pMpTcb->WrIndexStart.bits.val, - pMpTcb->WrIndex.value, - pMpTcb->WrIndex.bits.val); - do { desc = - (TX_DESC_ENTRY_t *) (pAdapter->TxRing. - pTxDescRingVa + - pMpTcb->WrIndexStart.bits.val); - - DBG_TX(et131x_dbginfo, - "CURRENT DESCRIPTOR\n" - "\tAddress : 0x%p\n" - "\tDataBufferPtrHigh : 0x%08x\n" - "\tDataBufferPtrLow : 0x%08x\n" - "\tword2 : 0x%08x\n" - "\tword3 : 0x%08x\n", - desc, - desc->DataBufferPtrHigh, - desc->DataBufferPtrLow, - desc->word2.value, - desc->word3.value); - - pci_unmap_single(pAdapter->pdev, + (TX_DESC_ENTRY_t *) (etdev->TxRing.pTxDescRingVa + + INDEX10(pMpTcb->WrIndexStart)); + + pci_unmap_single(etdev->pdev, desc->DataBufferPtrLow, desc->word2.value, PCI_DMA_TODEVICE); - if (++pMpTcb->WrIndexStart.bits.val >= + add_10bit(&pMpTcb->WrIndexStart, 1); + if (INDEX10(pMpTcb->WrIndexStart) >= NUM_DESC_PER_RING_TX) { - if (pMpTcb->WrIndexStart.bits.wrap) { - pMpTcb->WrIndexStart.value = 0; - } else { - pMpTcb->WrIndexStart.value = 0x400; - } + pMpTcb->WrIndexStart &= ~ET_DMA10_MASK; + pMpTcb->WrIndexStart ^= ET_DMA10_WRAP; } - } - while (desc != (pAdapter->TxRing.pTxDescRingVa + - pMpTcb->WrIndex.bits.val)); - - DBG_TX(et131x_dbginfo, - "Free Packet (SKB) : 0x%p\n", pMpTcb->Packet); + } while (desc != (etdev->TxRing.pTxDescRingVa + + INDEX10(pMpTcb->WrIndex))); dev_kfree_skb_any(pMpTcb->Packet); } @@ -1317,206 +747,183 @@ __inline void et131x_free_send_packet(struct et131x_adapter *pAdapter, PMP_TCB p memset(pMpTcb, 0, sizeof(MP_TCB)); /* Add the TCB to the Ready Q */ - spin_lock_irqsave(&pAdapter->TCBReadyQLock, lockflags); + spin_lock_irqsave(&etdev->TCBReadyQLock, flags); - pAdapter->Stats.opackets++; + etdev->Stats.opackets++; - if (pAdapter->TxRing.TCBReadyQueueTail) { - pAdapter->TxRing.TCBReadyQueueTail->Next = pMpTcb; + if (etdev->TxRing.TCBReadyQueueTail) { + etdev->TxRing.TCBReadyQueueTail->Next = pMpTcb; } else { /* Apparently ready Q is empty. */ - pAdapter->TxRing.TCBReadyQueueHead = pMpTcb; + etdev->TxRing.TCBReadyQueueHead = pMpTcb; } - pAdapter->TxRing.TCBReadyQueueTail = pMpTcb; + etdev->TxRing.TCBReadyQueueTail = pMpTcb; - spin_unlock_irqrestore(&pAdapter->TCBReadyQLock, lockflags); - - DBG_ASSERT(pAdapter->TxRing.nBusySend >= 0); + spin_unlock_irqrestore(&etdev->TCBReadyQLock, flags); + WARN_ON(etdev->TxRing.nBusySend < 0); } /** * et131x_free_busy_send_packets - Free and complete the stopped active sends - * @pAdapter: pointer to our adapter + * @etdev: pointer to our adapter * * Assumption - Send spinlock has been acquired */ -void et131x_free_busy_send_packets(struct et131x_adapter *pAdapter) +void et131x_free_busy_send_packets(struct et131x_adapter *etdev) { PMP_TCB pMpTcb; - struct list_head *pEntry; - unsigned long lockflags; + struct list_head *entry; + unsigned long flags; uint32_t FreeCounter = 0; - DBG_ENTER(et131x_dbginfo); - - while (!list_empty(&pAdapter->TxRing.SendWaitQueue)) { - spin_lock_irqsave(&pAdapter->SendWaitLock, lockflags); + while (!list_empty(&etdev->TxRing.SendWaitQueue)) { + spin_lock_irqsave(&etdev->SendWaitLock, flags); - pAdapter->TxRing.nWaitSend--; - spin_unlock_irqrestore(&pAdapter->SendWaitLock, lockflags); + etdev->TxRing.nWaitSend--; + spin_unlock_irqrestore(&etdev->SendWaitLock, flags); - pEntry = pAdapter->TxRing.SendWaitQueue.next; + entry = etdev->TxRing.SendWaitQueue.next; } - pAdapter->TxRing.nWaitSend = 0; + etdev->TxRing.nWaitSend = 0; /* Any packets being sent? Check the first TCB on the send list */ - spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags); + spin_lock_irqsave(&etdev->TCBSendQLock, flags); - pMpTcb = pAdapter->TxRing.CurrSendHead; + pMpTcb = etdev->TxRing.CurrSendHead; while ((pMpTcb != NULL) && (FreeCounter < NUM_TCB)) { PMP_TCB pNext = pMpTcb->Next; - pAdapter->TxRing.CurrSendHead = pNext; + etdev->TxRing.CurrSendHead = pNext; - if (pNext == NULL) { - pAdapter->TxRing.CurrSendTail = NULL; - } + if (pNext == NULL) + etdev->TxRing.CurrSendTail = NULL; - pAdapter->TxRing.nBusySend--; + etdev->TxRing.nBusySend--; - spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags); - - DBG_VERBOSE(et131x_dbginfo, "pMpTcb = 0x%p\n", pMpTcb); + spin_unlock_irqrestore(&etdev->TCBSendQLock, flags); FreeCounter++; - MP_FREE_SEND_PACKET_FUN(pAdapter, pMpTcb); + et131x_free_send_packet(etdev, pMpTcb); - spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags); + spin_lock_irqsave(&etdev->TCBSendQLock, flags); - pMpTcb = pAdapter->TxRing.CurrSendHead; + pMpTcb = etdev->TxRing.CurrSendHead; } - if (FreeCounter == NUM_TCB) { - DBG_ERROR(et131x_dbginfo, - "MpFreeBusySendPackets exitted loop for a bad reason\n"); - BUG(); - } + WARN_ON(FreeCounter == NUM_TCB); - spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags); + spin_unlock_irqrestore(&etdev->TCBSendQLock, flags); - pAdapter->TxRing.nBusySend = 0; - - DBG_LEAVE(et131x_dbginfo); + etdev->TxRing.nBusySend = 0; } /** * et131x_handle_send_interrupt - Interrupt handler for sending processing - * @pAdapter: pointer to our adapter + * @etdev: pointer to our adapter * * Re-claim the send resources, complete sends and get more to send from * the send wait queue. * * Assumption - Send spinlock has been acquired */ -void et131x_handle_send_interrupt(struct et131x_adapter *pAdapter) +void et131x_handle_send_interrupt(struct et131x_adapter *etdev) { - DBG_TX_ENTER(et131x_dbginfo); - /* Mark as completed any packets which have been sent by the device. */ - et131x_update_tcb_list(pAdapter); + et131x_update_tcb_list(etdev); /* If we queued any transmits because we didn't have any TCBs earlier, * dequeue and send those packets now, as long as we have free TCBs. */ - et131x_check_send_wait_list(pAdapter); - - DBG_TX_LEAVE(et131x_dbginfo); + et131x_check_send_wait_list(etdev); } /** * et131x_update_tcb_list - Helper routine for Send Interrupt handler - * @pAdapter: pointer to our adapter + * @etdev: pointer to our adapter * * Re-claims the send resources and completes sends. Can also be called as * part of the NIC send routine when the "ServiceComplete" indication has * wrapped. */ -static void et131x_update_tcb_list(struct et131x_adapter *pAdapter) +static void et131x_update_tcb_list(struct et131x_adapter *etdev) { - unsigned long lockflags; - DMA10W_t ServiceComplete; + unsigned long flags; + u32 ServiceComplete; PMP_TCB pMpTcb; + u32 index; - ServiceComplete.value = - readl(&pAdapter->CSRAddress->txdma.NewServiceComplete.value); + ServiceComplete = readl(&etdev->regs->txdma.NewServiceComplete); + index = INDEX10(ServiceComplete); /* Has the ring wrapped? Process any descriptors that do not have * the same "wrap" indicator as the current completion indicator */ - spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags); + spin_lock_irqsave(&etdev->TCBSendQLock, flags); + + pMpTcb = etdev->TxRing.CurrSendHead; - pMpTcb = pAdapter->TxRing.CurrSendHead; while (pMpTcb && - ServiceComplete.bits.wrap != pMpTcb->WrIndex.bits.wrap && - ServiceComplete.bits.val < pMpTcb->WrIndex.bits.val) { - pAdapter->TxRing.nBusySend--; - pAdapter->TxRing.CurrSendHead = pMpTcb->Next; - if (pMpTcb->Next == NULL) { - pAdapter->TxRing.CurrSendTail = NULL; - } + ((ServiceComplete ^ pMpTcb->WrIndex) & ET_DMA10_WRAP) && + index < INDEX10(pMpTcb->WrIndex)) { + etdev->TxRing.nBusySend--; + etdev->TxRing.CurrSendHead = pMpTcb->Next; + if (pMpTcb->Next == NULL) + etdev->TxRing.CurrSendTail = NULL; - spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags); - MP_FREE_SEND_PACKET_FUN(pAdapter, pMpTcb); - spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags); + spin_unlock_irqrestore(&etdev->TCBSendQLock, flags); + et131x_free_send_packet(etdev, pMpTcb); + spin_lock_irqsave(&etdev->TCBSendQLock, flags); /* Goto the next packet */ - pMpTcb = pAdapter->TxRing.CurrSendHead; + pMpTcb = etdev->TxRing.CurrSendHead; } while (pMpTcb && - ServiceComplete.bits.wrap == pMpTcb->WrIndex.bits.wrap && - ServiceComplete.bits.val > pMpTcb->WrIndex.bits.val) { - pAdapter->TxRing.nBusySend--; - pAdapter->TxRing.CurrSendHead = pMpTcb->Next; - if (pMpTcb->Next == NULL) { - pAdapter->TxRing.CurrSendTail = NULL; - } + !((ServiceComplete ^ pMpTcb->WrIndex) & ET_DMA10_WRAP) + && index > (pMpTcb->WrIndex & ET_DMA10_MASK)) { + etdev->TxRing.nBusySend--; + etdev->TxRing.CurrSendHead = pMpTcb->Next; + if (pMpTcb->Next == NULL) + etdev->TxRing.CurrSendTail = NULL; - spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags); - MP_FREE_SEND_PACKET_FUN(pAdapter, pMpTcb); - spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags); + spin_unlock_irqrestore(&etdev->TCBSendQLock, flags); + et131x_free_send_packet(etdev, pMpTcb); + spin_lock_irqsave(&etdev->TCBSendQLock, flags); /* Goto the next packet */ - pMpTcb = pAdapter->TxRing.CurrSendHead; + pMpTcb = etdev->TxRing.CurrSendHead; } /* Wake up the queue when we hit a low-water mark */ - if (pAdapter->TxRing.nBusySend <= (NUM_TCB / 3)) { - netif_wake_queue(pAdapter->netdev); - } + if (etdev->TxRing.nBusySend <= (NUM_TCB / 3)) + netif_wake_queue(etdev->netdev); - spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags); + spin_unlock_irqrestore(&etdev->TCBSendQLock, flags); } /** * et131x_check_send_wait_list - Helper routine for the interrupt handler - * @pAdapter: pointer to our adapter + * @etdev: pointer to our adapter * * Takes packets from the send wait queue and posts them to the device (if * room available). */ -static void et131x_check_send_wait_list(struct et131x_adapter *pAdapter) +static void et131x_check_send_wait_list(struct et131x_adapter *etdev) { - unsigned long lockflags; - - spin_lock_irqsave(&pAdapter->SendWaitLock, lockflags); - - while (!list_empty(&pAdapter->TxRing.SendWaitQueue) && - MP_TCB_RESOURCES_AVAILABLE(pAdapter)) { - struct list_head *pEntry; + unsigned long flags; - DBG_VERBOSE(et131x_dbginfo, "Tx packets on the wait queue\n"); + spin_lock_irqsave(&etdev->SendWaitLock, flags); - pEntry = pAdapter->TxRing.SendWaitQueue.next; + while (!list_empty(&etdev->TxRing.SendWaitQueue) && + MP_TCB_RESOURCES_AVAILABLE(etdev)) { + struct list_head *entry; - pAdapter->TxRing.nWaitSend--; + entry = etdev->TxRing.SendWaitQueue.next; - DBG_WARNING(et131x_dbginfo, - "MpHandleSendInterrupt - sent a queued pkt. Waiting %d\n", - pAdapter->TxRing.nWaitSend); + etdev->TxRing.nWaitSend--; } - spin_unlock_irqrestore(&pAdapter->SendWaitLock, lockflags); + spin_unlock_irqrestore(&etdev->SendWaitLock, flags); } diff --git a/drivers/staging/et131x/et1310_tx.h b/drivers/staging/et131x/et1310_tx.h index 2819c78..ad03721 100644 --- a/drivers/staging/et131x/et1310_tx.h +++ b/drivers/staging/et131x/et1310_tx.h @@ -2,7 +2,7 @@ * Agere Systems Inc. * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * http://www.agere.com * @@ -20,7 +20,7 @@ * software indicates your acceptance of these terms and conditions. If you do * not agree with these terms and conditions, do not use the software. * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * * Redistribution and use in source or binary forms, with or without @@ -41,7 +41,7 @@ * * Disclaimer * - * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN @@ -70,15 +70,15 @@ typedef union _txdesc_word2_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 vlan_prio:3; // bits 29-31(VLAN priority) - u32 vlan_cfi:1; // bit 28(cfi) - u32 vlan_tag:12; // bits 16-27(VLAN tag) - u32 length_in_bytes:16; // bits 0-15(packet length) + u32 vlan_prio:3; /* bits 29-31(VLAN priority) */ + u32 vlan_cfi:1; /* bit 28(cfi) */ + u32 vlan_tag:12; /* bits 16-27(VLAN tag) */ + u32 length_in_bytes:16; /* bits 0-15(packet length) */ #else - u32 length_in_bytes:16; // bits 0-15(packet length) - u32 vlan_tag:12; // bits 16-27(VLAN tag) - u32 vlan_cfi:1; // bit 28(cfi) - u32 vlan_prio:3; // bits 29-31(VLAN priority) + u32 length_in_bytes:16; /* bits 0-15(packet length) */ + u32 vlan_tag:12; /* bits 16-27(VLAN tag) */ + u32 vlan_cfi:1; /* bit 28(cfi) */ + u32 vlan_prio:3; /* bits 29-31(VLAN priority) */ #endif /* _BIT_FIELDS_HTOL */ } bits; } TXDESC_WORD2_t, *PTXDESC_WORD2_t; @@ -91,39 +91,39 @@ typedef union _txdesc_word3_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 unused:17; // bits 15-31 - u32 udpa:1; // bit 14(UDP checksum assist) - u32 tcpa:1; // bit 13(TCP checksum assist) - u32 ipa:1; // bit 12(IP checksum assist) - u32 vlan:1; // bit 11(append VLAN tag) - u32 hp:1; // bit 10(Packet is a Huge packet) - u32 pp:1; // bit 9(pad packet) - u32 mac:1; // bit 8(MAC override) - u32 crc:1; // bit 7(append CRC) - u32 e:1; // bit 6(Tx frame has error) - u32 pf:1; // bit 5(send pause frame) - u32 bp:1; // bit 4(Issue half-duplex backpressure (XON/XOFF) - u32 cw:1; // bit 3(Control word - no packet data) - u32 ir:1; // bit 2(interrupt the processor when this pkt sent) - u32 f:1; // bit 1(first packet in the sequence) - u32 l:1; // bit 0(last packet in the sequence) + u32 unused:17; /* bits 15-31 */ + u32 udpa:1; /* bit 14(UDP checksum assist) */ + u32 tcpa:1; /* bit 13(TCP checksum assist) */ + u32 ipa:1; /* bit 12(IP checksum assist) */ + u32 vlan:1; /* bit 11(append VLAN tag) */ + u32 hp:1; /* bit 10(Packet is a Huge packet) */ + u32 pp:1; /* bit 9(pad packet) */ + u32 mac:1; /* bit 8(MAC override) */ + u32 crc:1; /* bit 7(append CRC) */ + u32 e:1; /* bit 6(Tx frame has error) */ + u32 pf:1; /* bit 5(send pause frame) */ + u32 bp:1; /* bit 4(Issue half-duplex backpressure (XON/XOFF) */ + u32 cw:1; /* bit 3(Control word - no packet data) */ + u32 ir:1; /* bit 2(interrupt the processor when this pkt sent) */ + u32 f:1; /* bit 1(first packet in the sequence) */ + u32 l:1; /* bit 0(last packet in the sequence) */ #else - u32 l:1; // bit 0(last packet in the sequence) - u32 f:1; // bit 1(first packet in the sequence) - u32 ir:1; // bit 2(interrupt the processor when this pkt sent) - u32 cw:1; // bit 3(Control word - no packet data) - u32 bp:1; // bit 4(Issue half-duplex backpressure (XON/XOFF) - u32 pf:1; // bit 5(send pause frame) - u32 e:1; // bit 6(Tx frame has error) - u32 crc:1; // bit 7(append CRC) - u32 mac:1; // bit 8(MAC override) - u32 pp:1; // bit 9(pad packet) - u32 hp:1; // bit 10(Packet is a Huge packet) - u32 vlan:1; // bit 11(append VLAN tag) - u32 ipa:1; // bit 12(IP checksum assist) - u32 tcpa:1; // bit 13(TCP checksum assist) - u32 udpa:1; // bit 14(UDP checksum assist) - u32 unused:17; // bits 15-31 + u32 l:1; /* bit 0(last packet in the sequence) */ + u32 f:1; /* bit 1(first packet in the sequence) */ + u32 ir:1; /* bit 2(interrupt the processor when this pkt sent) */ + u32 cw:1; /* bit 3(Control word - no packet data) */ + u32 bp:1; /* bit 4(Issue half-duplex backpressure (XON/XOFF) */ + u32 pf:1; /* bit 5(send pause frame) */ + u32 e:1; /* bit 6(Tx frame has error) */ + u32 crc:1; /* bit 7(append CRC) */ + u32 mac:1; /* bit 8(MAC override) */ + u32 pp:1; /* bit 9(pad packet) */ + u32 hp:1; /* bit 10(Packet is a Huge packet) */ + u32 vlan:1; /* bit 11(append VLAN tag) */ + u32 ipa:1; /* bit 12(IP checksum assist) */ + u32 tcpa:1; /* bit 13(TCP checksum assist) */ + u32 udpa:1; /* bit 14(UDP checksum assist) */ + u32 unused:17; /* bits 15-31 */ #endif /* _BIT_FIELDS_HTOL */ } bits; } TXDESC_WORD3_t, *PTXDESC_WORD3_t; @@ -132,8 +132,8 @@ typedef union _txdesc_word3_t { typedef struct _tx_desc_entry_t { u32 DataBufferPtrHigh; u32 DataBufferPtrLow; - TXDESC_WORD2_t word2; // control words how to xmit the - TXDESC_WORD3_t word3; // data (detailed above) + TXDESC_WORD2_t word2; /* control words how to xmit the */ + TXDESC_WORD3_t word3; /* data (detailed above) */ } TX_DESC_ENTRY_t, *PTX_DESC_ENTRY_t; @@ -147,13 +147,13 @@ typedef union _tx_status_block_t { u32 value; struct { #ifdef _BIT_FIELDS_HTOL - u32 unused:21; // bits 11-31 - u32 serv_cpl_wrap:1; // bit 10 - u32 serv_cpl:10; // bits 0-9 + u32 unused:21; /* bits 11-31 */ + u32 serv_cpl_wrap:1; /* bit 10 */ + u32 serv_cpl:10; /* bits 0-9 */ #else - u32 serv_cpl:10; // bits 0-9 - u32 serv_cpl_wrap:1; // bit 10 - u32 unused:21; // bits 11-31 + u32 serv_cpl:10; /* bits 0-9 */ + u32 serv_cpl_wrap:1; /* bit 10 */ + u32 unused:21; /* bits 11-31 */ #endif } bits; } TX_STATUS_BLOCK_t, *PTX_STATUS_BLOCK_t; @@ -166,8 +166,8 @@ typedef struct _MP_TCB { u32 PacketStaleCount; struct sk_buff *Packet; u32 PacketLength; - DMA10W_t WrIndex; - DMA10W_t WrIndexStart; + u32 WrIndex; + u32 WrIndexStart; } MP_TCB, *PMP_TCB; /* Structure to hold the skb's in a list */ @@ -206,7 +206,7 @@ typedef struct _tx_ring_t { uint64_t TxDescOffset; /* ReadyToSend indicates where we last wrote to in the descriptor ring. */ - DMA10W_t txDmaReadyToSend; + u32 txDmaReadyToSend; /* The location of the write-back status block */ PTX_STATUS_BLOCK_t pTxStatusVa; diff --git a/drivers/staging/et131x/et131x_adapter.h b/drivers/staging/et131x/et131x_adapter.h index 36e61a4..1dfe06f 100644 --- a/drivers/staging/et131x/et131x_adapter.h +++ b/drivers/staging/et131x/et131x_adapter.h @@ -2,7 +2,7 @@ * Agere Systems Inc. * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * http://www.agere.com * @@ -20,7 +20,7 @@ * software indicates your acceptance of these terms and conditions. If you do * not agree with these terms and conditions, do not use the software. * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * * Redistribution and use in source or binary forms, with or without @@ -41,7 +41,7 @@ * * Disclaimer * - * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN @@ -67,7 +67,7 @@ * Do not change these values: if changed, then change also in respective * TXdma and Rxdma engines */ -#define NUM_DESC_PER_RING_TX 512 // TX Do not change these values +#define NUM_DESC_PER_RING_TX 512 /* TX Do not change these values */ #define NUM_TCB 64 /* @@ -100,28 +100,11 @@ #define LO_MARK_PERCENT_FOR_PSR 15 #define LO_MARK_PERCENT_FOR_RX 15 -/* Macros for flag and ref count operations */ -#define MP_SET_FLAG(_M, _F) ((_M)->Flags |= (_F)) -#define MP_CLEAR_FLAG(_M, _F) ((_M)->Flags &= ~(_F)) -#define MP_CLEAR_FLAGS(_M) ((_M)->Flags = 0) -#define MP_TEST_FLAG(_M, _F) (((_M)->Flags & (_F)) != 0) -#define MP_TEST_FLAGS(_M, _F) (((_M)->Flags & (_F)) == (_F)) -#define MP_IS_FLAG_CLEAR(_M, _F) (((_M)->Flags & (_F)) == 0) - -#define MP_INC_RCV_REF(_A) atomic_inc(&(_A)->RcvRefCount) -#define MP_DEC_RCV_REF(_A) atomic_dec(&(_A)->RcvRefCount) -#define MP_GET_RCV_REF(_A) atomic_read(&(_A)->RcvRefCount) - /* Macros specific to the private adapter structure */ #define MP_TCB_RESOURCES_AVAILABLE(_M) ((_M)->TxRing.nBusySend < NUM_TCB) #define MP_TCB_RESOURCES_NOT_AVAILABLE(_M) ((_M)->TxRing.nBusySend >= NUM_TCB) #define MP_SHOULD_FAIL_SEND(_M) ((_M)->Flags & fMP_ADAPTER_FAIL_SEND_MASK) -#define MP_IS_NOT_READY(_M) ((_M)->Flags & fMP_ADAPTER_NOT_READY_MASK) -#define MP_IS_READY(_M) !((_M)->Flags & fMP_ADAPTER_NOT_READY_MASK) - -#define MP_HAS_CABLE(_M) !((_M)->Flags & fMP_ADAPTER_NO_CABLE) -#define MP_LINK_DETECTED(_M) !((_M)->Flags & fMP_ADAPTER_LINK_DETECTION) /* Counters for error rate monitoring */ typedef struct _MP_ERR_COUNTERS { @@ -136,9 +119,9 @@ typedef struct _MP_ERR_COUNTERS { typedef struct _MP_RFD { struct list_head list_node; struct sk_buff *Packet; - u32 PacketSize; // total size of receive frame - u16 iBufferIndex; - u8 iRingIndex; + u32 PacketSize; /* total size of receive frame */ + u16 bufferindex; + u8 ringindex; } MP_RFD, *PMP_RFD; /* Enum for Flow Control */ @@ -152,8 +135,8 @@ typedef enum _eflow_control_t { /* Struct to define some device statistics */ typedef struct _ce_stats_t { /* Link Input/Output stats */ - uint64_t ipackets; // # of in packets - uint64_t opackets; // # of out packets + uint64_t ipackets; /* # of in packets */ + uint64_t opackets; /* # of out packets */ /* MIB II variables * @@ -161,21 +144,21 @@ typedef struct _ce_stats_t { * MUST have 32, then we'll need another way to perform atomic * operations */ - u32 unircv; // # multicast packets received - atomic_t unixmt; // # multicast packets for Tx - u32 multircv; // # multicast packets received - atomic_t multixmt; // # multicast packets for Tx - u32 brdcstrcv; // # broadcast packets received - atomic_t brdcstxmt; // # broadcast packets for Tx - u32 norcvbuf; // # Rx packets discarded - u32 noxmtbuf; // # Tx packets discarded + u32 unircv; /* # multicast packets received */ + atomic_t unixmt; /* # multicast packets for Tx */ + u32 multircv; /* # multicast packets received */ + atomic_t multixmt; /* # multicast packets for Tx */ + u32 brdcstrcv; /* # broadcast packets received */ + atomic_t brdcstxmt; /* # broadcast packets for Tx */ + u32 norcvbuf; /* # Rx packets discarded */ + u32 noxmtbuf; /* # Tx packets discarded */ /* Transciever state informations. */ u8 xcvr_addr; u32 xcvr_id; /* Tx Statistics. */ - u32 tx_uflo; // Tx Underruns + u32 tx_uflo; /* Tx Underruns */ u32 collisions; u32 excessive_collisions; @@ -185,7 +168,7 @@ typedef struct _ce_stats_t { u32 tx_deferred; /* Rx Statistics. */ - u32 rx_ov_flow; // Rx Over Flow + u32 rx_ov_flow; /* Rx Over Flow */ u32 length_err; u32 alignment_err; @@ -193,15 +176,8 @@ typedef struct _ce_stats_t { u32 code_violations; u32 other_errors; -#ifdef CONFIG_ET131X_DEBUG - u32 UnhandledInterruptsPerSec; - u32 RxDmaInterruptsPerSec; - u32 TxDmaInterruptsPerSec; - u32 WatchDogInterruptsPerSec; -#endif /* CONFIG_ET131X_DEBUG */ - u32 SynchrounousIterations; - INTERRUPT_t InterruptStatus; + u32 InterruptStatus; } CE_STATS_t, *PCE_STATS_t; /* The private adapter structure */ @@ -218,8 +194,7 @@ struct et131x_adapter { /* Configuration */ u8 PermanentAddress[ETH_ALEN]; u8 CurrentAddress[ETH_ALEN]; - bool bOverrideAddress; - bool bEepromPresent; + bool has_eeprom; u8 eepromData[2]; /* Spinlocks */ @@ -238,11 +213,8 @@ struct et131x_adapter { /* Packet Filter and look ahead size */ u32 PacketFilter; - u32 ulLookAhead; - u32 uiLinkSpeed; - u32 uiDuplexMode; - u32 uiAutoNegStatus; - u8 ucLinkStatus; + u32 linkspeed; + u32 duplex_mode; /* multicast list */ u32 MCAddressCount; @@ -252,50 +224,24 @@ struct et131x_adapter { TXMAC_TXTEST_t TxMacTest; /* Pointer to the device's PCI register space */ - ADDRESS_MAP_t __iomem *CSRAddress; - - /* PCI config space info, for debug purposes only. */ - u8 RevisionID; - u16 VendorID; - u16 DeviceID; - u16 SubVendorID; - u16 SubSystemID; - u32 CacheFillSize; - u16 PciXDevCtl; - u8 pci_lat_timer; - u8 pci_hdr_type; - u8 pci_bist; - u32 pci_cfg_state[64 / sizeof(u32)]; + ADDRESS_MAP_t __iomem *regs; /* Registry parameters */ - u8 SpeedDuplex; // speed/duplex - eFLOW_CONTROL_t RegistryFlowControl; // for 802.3x flow control - u8 RegistryWOLMatch; // Enable WOL pattern-matching - u8 RegistryWOLLink; // Link state change is independant - u8 RegistryPhyComa; // Phy Coma mode enable/disable - - u32 RegistryRxMemEnd; // Size of internal rx memory - u8 RegistryMACStat; // If set, read MACSTAT, else don't - u32 RegistryVlanTag; // 802.1q Vlan TAG - u32 RegistryJumboPacket; // Max supported ethernet packet size + u8 SpeedDuplex; /* speed/duplex */ + eFLOW_CONTROL_t RegistryFlowControl; /* for 802.3x flow control */ + u8 RegistryPhyComa; /* Phy Coma mode enable/disable */ - u32 RegistryTxNumBuffers; - u32 RegistryTxTimeInterval; - - u32 RegistryRxNumBuffers; - u32 RegistryRxTimeInterval; + u32 RegistryRxMemEnd; /* Size of internal rx memory */ + u32 RegistryJumboPacket; /* Max supported ethernet packet size */ /* Validation helpers */ - u8 RegistryPMWOL; u8 RegistryNMIDisable; - u32 RegistryDMACache; - u32 RegistrySCGain; - u8 RegistryPhyLoopbk; // Enable Phy loopback + u8 RegistryPhyLoopbk; /* Enable Phy loopback */ /* Derived from the registry: */ - u8 AiForceDpx; // duplex setting - u16 AiForceSpeed; // 'Speed', user over-ride of line speed - eFLOW_CONTROL_t FlowControl; // flow control validated by the far-end + u8 AiForceDpx; /* duplex setting */ + u16 AiForceSpeed; /* 'Speed', user over-ride of line speed */ + eFLOW_CONTROL_t FlowControl; /* flow control validated by the far-end */ enum { NETIF_STATUS_INVALID = 0, NETIF_STATUS_MEDIA_CONNECT, @@ -305,15 +251,9 @@ struct et131x_adapter { u8 DriverNoPhyAccess; /* Minimize init-time */ - bool bQueryPending; - bool bSetPending; - bool bResetPending; struct timer_list ErrorTimer; - bool bLinkTimerActive; MP_POWER_MGMT PoMgmt; - INTERRUPT_t CachedMaskValue; - - atomic_t RcvRefCount; // Num packets not yet returned + u32 CachedMaskValue; /* Xcvr status at last poll */ MI_BMSR_t Bmsr; @@ -324,13 +264,9 @@ struct et131x_adapter { /* Rx Memory Variables */ RX_RING_t RxRing; - /* ET1310 register Access */ - JAGCORE_ACCESS_REGS JagCoreRegs; - PCI_CFG_SPACE_REGS PciCfgRegs; - /* Loopback specifics */ - u8 ReplicaPhyLoopbk; // Replica Enable - u8 ReplicaPhyLoopbkPF; // Replica Enable Pass/Fail + u8 ReplicaPhyLoopbk; /* Replica Enable */ + u8 ReplicaPhyLoopbkPF; /* Replica Enable Pass/Fail */ /* Stats */ CE_STATS_t Stats; @@ -339,9 +275,4 @@ struct et131x_adapter { struct net_device_stats net_stats_prev; }; -#define MPSendPacketsHandler MPSendPackets -#define MP_FREE_SEND_PACKET_FUN(Adapter, pMpTcb) \ - et131x_free_send_packet(Adapter, pMpTcb) -#define MpSendPacketFun(Adapter, Packet) MpSendPacket(Adapter, Packet) - #endif /* __ET131X_ADAPTER_H__ */ diff --git a/drivers/staging/et131x/et131x_config.c b/drivers/staging/et131x/et131x_config.c deleted file mode 100644 index 0adbaa6..0000000 --- a/drivers/staging/et131x/et131x_config.c +++ /dev/null @@ -1,325 +0,0 @@ -/* - * Agere Systems Inc. - * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs - * - * Copyright © 2005 Agere Systems Inc. - * All rights reserved. - * http://www.agere.com - * - *------------------------------------------------------------------------------ - * - * et131x_config.c - Handles parsing of configuration data during - * initialization. - * - *------------------------------------------------------------------------------ - * - * SOFTWARE LICENSE - * - * This software is provided subject to the following terms and conditions, - * which you should read carefully before using the software. Using this - * software indicates your acceptance of these terms and conditions. If you do - * not agree with these terms and conditions, do not use the software. - * - * Copyright © 2005 Agere Systems Inc. - * All rights reserved. - * - * Redistribution and use in source or binary forms, with or without - * modifications, are permitted provided that the following conditions are met: - * - * . Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following Disclaimer as comments in the code as - * well as in the documentation and/or other materials provided with the - * distribution. - * - * . Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following Disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * . Neither the name of Agere Systems Inc. nor the names of the contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * Disclaimer - * - * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY - * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN - * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH - * DAMAGE. - * - */ - -#include "et131x_version.h" -#include "et131x_debug.h" -#include "et131x_defs.h" - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> - -#include <linux/sched.h> -#include <linux/ptrace.h> -#include <linux/slab.h> -#include <linux/ctype.h> -#include <linux/string.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/in.h> -#include <linux/delay.h> -#include <asm/io.h> -#include <asm/system.h> -#include <asm/bitops.h> - -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/if_arp.h> -#include <linux/ioport.h> - -#include "et1310_phy.h" -#include "et1310_pm.h" -#include "et1310_jagcore.h" - -#include "et131x_adapter.h" -#include "et131x_initpci.h" -#include "et131x_config.h" - -#include "et1310_tx.h" - -/* Data for debugging facilities */ -#ifdef CONFIG_ET131X_DEBUG -extern dbg_info_t *et131x_dbginfo; -#endif /* CONFIG_ET131X_DEBUG */ - -/* Defines for Parameter Default/Min/Max vaules */ -#define PARM_SPEED_DUPLEX_DEF 0 -#define PARM_SPEED_DUPLEX_MIN 0 -#define PARM_SPEED_DUPLEX_MAX 5 - -#define PARM_VLAN_TAG_DEF 0 -#define PARM_VLAN_TAG_MIN 0 -#define PARM_VLAN_TAG_MAX 4095 - -#define PARM_FLOW_CTL_DEF 0 -#define PARM_FLOW_CTL_MIN 0 -#define PARM_FLOW_CTL_MAX 3 - -#define PARM_WOL_LINK_DEF 3 -#define PARM_WOL_LINK_MIN 0 -#define PARM_WOL_LINK_MAX 3 - -#define PARM_WOL_MATCH_DEF 7 -#define PARM_WOL_MATCH_MIN 0 -#define PARM_WOL_MATCH_MAX 7 - -#define PARM_JUMBO_PKT_DEF 1514 -#define PARM_JUMBO_PKT_MIN 1514 -#define PARM_JUMBO_PKT_MAX 9216 - -#define PARM_PHY_COMA_DEF 0 -#define PARM_PHY_COMA_MIN 0 -#define PARM_PHY_COMA_MAX 1 - -#define PARM_RX_NUM_BUFS_DEF 4 -#define PARM_RX_NUM_BUFS_MIN 1 -#define PARM_RX_NUM_BUFS_MAX 64 - -#define PARM_RX_TIME_INT_DEF 10 -#define PARM_RX_TIME_INT_MIN 2 -#define PARM_RX_TIME_INT_MAX 320 - -#define PARM_TX_NUM_BUFS_DEF 4 -#define PARM_TX_NUM_BUFS_MIN 1 -#define PARM_TX_NUM_BUFS_MAX 40 - -#define PARM_TX_TIME_INT_DEF 40 -#define PARM_TX_TIME_INT_MIN 1 -#define PARM_TX_TIME_INT_MAX 140 - -#define PARM_RX_MEM_END_DEF 0x2bc -#define PARM_RX_MEM_END_MIN 0 -#define PARM_RX_MEM_END_MAX 0x3ff - -#define PARM_MAC_STAT_DEF 1 -#define PARM_MAC_STAT_MIN 0 -#define PARM_MAC_STAT_MAX 1 - -#define PARM_SC_GAIN_DEF 7 -#define PARM_SC_GAIN_MIN 0 -#define PARM_SC_GAIN_MAX 7 - -#define PARM_PM_WOL_DEF 0 -#define PARM_PM_WOL_MIN 0 -#define PARM_PM_WOL_MAX 1 - -#define PARM_NMI_DISABLE_DEF 0 -#define PARM_NMI_DISABLE_MIN 0 -#define PARM_NMI_DISABLE_MAX 2 - -#define PARM_DMA_CACHE_DEF 0 -#define PARM_DMA_CACHE_MIN 0 -#define PARM_DMA_CACHE_MAX 15 - -#define PARM_PHY_LOOPBK_DEF 0 -#define PARM_PHY_LOOPBK_MIN 0 -#define PARM_PHY_LOOPBK_MAX 1 - -#define PARM_MAC_ADDRESS_DEF { 0x00, 0x05, 0x3d, 0x00, 0x02, 0x00 } - -/* Module parameter for disabling NMI - * et131x_speed_set : - * Set Link speed and dublex manually (0-5) [0] - * 1 : 10Mb Half-Duplex - * 2 : 10Mb Full-Duplex - * 3 : 100Mb Half-Duplex - * 4 : 100Mb Full-Duplex - * 5 : 1000Mb Full-Duplex - * 0 : Auto Speed Auto Dublex // default - */ -static u32 et131x_nmi_disable = PARM_NMI_DISABLE_DEF; -module_param(et131x_nmi_disable, uint, 0); -MODULE_PARM_DESC(et131x_nmi_disable, "Disable NMI (0-2) [0]"); - -/* Module parameter for manual speed setting - * et131x_nmi_disable : - * Disable NMI (0-2) [0] - * 0 : - * 1 : - * 2 : - */ -static u32 et131x_speed_set = PARM_SPEED_DUPLEX_DEF; -module_param(et131x_speed_set, uint, 0); -MODULE_PARM_DESC(et131x_speed_set, - "Set Link speed and dublex manually (0-5) [0] \n 1 : 10Mb Half-Duplex \n 2 : 10Mb Full-Duplex \n 3 : 100Mb Half-Duplex \n 4 : 100Mb Full-Duplex \n 5 : 1000Mb Full-Duplex \n 0 : Auto Speed Auto Dublex"); - -/** - * et131x_config_parse - * @pAdapter: pointer to the private adapter struct - * - * Parses a configuration from some location (module parameters, for example) - * into the private adapter struct - */ -void et131x_config_parse(struct et131x_adapter *pAdapter) -{ - uint8_t macAddrDef[] = PARM_MAC_ADDRESS_DEF; - - DBG_ENTER(et131x_dbginfo); - - /* - * The NDIS driver uses the registry to store persistent per-device - * configuration, and reads this configuration into the appropriate - * elements of the private adapter structure on initialization. - * Because Linux has no analog to the registry, use this function to - * initialize the private adapter structure with a default - * configuration. - * - * One other possibility is to use a series of module parameters which - * can be passed in by the caller when the module is initialized. - * However, this implementation does not allow for seperate - * configurations in the event multiple devices are present, and hence - * will not suffice. - * - * If another method is derived which addresses this problem, this is - * where it should be implemented. - */ - - /* Set the private adapter struct with default values for the - * corresponding parameters - */ - if (et131x_speed_set != PARM_SPEED_DUPLEX_DEF) { - DBG_VERBOSE(et131x_dbginfo, "Speed set manually to : %d \n", - et131x_speed_set); - pAdapter->SpeedDuplex = et131x_speed_set; - } else { - pAdapter->SpeedDuplex = PARM_SPEED_DUPLEX_DEF; - } - - // pAdapter->SpeedDuplex = PARM_SPEED_DUPLEX_DEF; - - pAdapter->RegistryVlanTag = PARM_VLAN_TAG_DEF; - pAdapter->RegistryFlowControl = PARM_FLOW_CTL_DEF; - pAdapter->RegistryWOLLink = PARM_WOL_LINK_DEF; - pAdapter->RegistryWOLMatch = PARM_WOL_MATCH_DEF; - pAdapter->RegistryJumboPacket = PARM_JUMBO_PKT_DEF; - pAdapter->RegistryPhyComa = PARM_PHY_COMA_DEF; - pAdapter->RegistryRxNumBuffers = PARM_RX_NUM_BUFS_DEF; - pAdapter->RegistryRxTimeInterval = PARM_RX_TIME_INT_DEF; - pAdapter->RegistryTxNumBuffers = PARM_TX_NUM_BUFS_DEF; - pAdapter->RegistryTxTimeInterval = PARM_TX_TIME_INT_DEF; - pAdapter->RegistryRxMemEnd = PARM_RX_MEM_END_DEF; - pAdapter->RegistryMACStat = PARM_MAC_STAT_DEF; - pAdapter->RegistrySCGain = PARM_SC_GAIN_DEF; - pAdapter->RegistryPMWOL = PARM_PM_WOL_DEF; - - if (et131x_nmi_disable != PARM_NMI_DISABLE_DEF) { - pAdapter->RegistryNMIDisable = et131x_nmi_disable; - } else { - pAdapter->RegistryNMIDisable = PARM_NMI_DISABLE_DEF; - } - - pAdapter->RegistryDMACache = PARM_DMA_CACHE_DEF; - pAdapter->RegistryPhyLoopbk = PARM_PHY_LOOPBK_DEF; - - /* Set the MAC address to a default */ - memcpy(pAdapter->CurrentAddress, macAddrDef, ETH_ALEN); - pAdapter->bOverrideAddress = false; - - DBG_TRACE(et131x_dbginfo, - "Default MAC Address : %02x:%02x:%02x:%02x:%02x:%02x\n", - pAdapter->CurrentAddress[0], pAdapter->CurrentAddress[1], - pAdapter->CurrentAddress[2], pAdapter->CurrentAddress[3], - pAdapter->CurrentAddress[4], pAdapter->CurrentAddress[5]); - - /* Decode SpeedDuplex - * - * Set up as if we are auto negotiating always and then change if we - * go into force mode - */ - pAdapter->AiForceSpeed = 0; // Auto speed - pAdapter->AiForceDpx = 0; // Auto FDX - - /* If we are the 10/100 device, and gigabit is somehow requested then - * knock it down to 100 full. - */ - if ((pAdapter->DeviceID == ET131X_PCI_DEVICE_ID_FAST) && - (pAdapter->SpeedDuplex == 5)) { - pAdapter->SpeedDuplex = 4; - } - - switch (pAdapter->SpeedDuplex) { - case 1: // 10Mb Half-Duplex - pAdapter->AiForceSpeed = 10; - pAdapter->AiForceDpx = 1; - break; - - case 2: // 10Mb Full-Duplex - pAdapter->AiForceSpeed = 10; - pAdapter->AiForceDpx = 2; - break; - - case 3: // 100Mb Half-Duplex - pAdapter->AiForceSpeed = 100; - pAdapter->AiForceDpx = 1; - break; - - case 4: // 100Mb Full-Duplex - pAdapter->AiForceSpeed = 100; - pAdapter->AiForceDpx = 2; - break; - - case 5: // 1000Mb Full-Duplex - pAdapter->AiForceSpeed = 1000; - pAdapter->AiForceDpx = 2; - break; - } - - DBG_LEAVE(et131x_dbginfo); -} diff --git a/drivers/staging/et131x/et131x_debug.c b/drivers/staging/et131x/et131x_debug.c deleted file mode 100644 index d1dd46e..0000000 --- a/drivers/staging/et131x/et131x_debug.c +++ /dev/null @@ -1,217 +0,0 @@ -/* - * Agere Systems Inc. - * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs - * - * Copyright © 2005 Agere Systems Inc. - * All rights reserved. - * http://www.agere.com - * - *------------------------------------------------------------------------------ - * - * et131x_debug.c - Routines used for debugging. - * - *------------------------------------------------------------------------------ - * - * SOFTWARE LICENSE - * - * This software is provided subject to the following terms and conditions, - * which you should read carefully before using the software. Using this - * software indicates your acceptance of these terms and conditions. If you do - * not agree with these terms and conditions, do not use the software. - * - * Copyright © 2005 Agere Systems Inc. - * All rights reserved. - * - * Redistribution and use in source or binary forms, with or without - * modifications, are permitted provided that the following conditions are met: - * - * . Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following Disclaimer as comments in the code as - * well as in the documentation and/or other materials provided with the - * distribution. - * - * . Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following Disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * . Neither the name of Agere Systems Inc. nor the names of the contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * Disclaimer - * - * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY - * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN - * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH - * DAMAGE. - * - */ - -#ifdef CONFIG_ET131X_DEBUG - -#include "et131x_version.h" -#include "et131x_debug.h" -#include "et131x_defs.h" - -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> - -#include <linux/sched.h> -#include <linux/ptrace.h> -#include <linux/slab.h> -#include <linux/ctype.h> -#include <linux/string.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/in.h> -#include <linux/delay.h> -#include <asm/io.h> -#include <asm/system.h> -#include <asm/bitops.h> - -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/if_arp.h> -#include <linux/ioport.h> -#include <linux/random.h> - -#include "et1310_phy.h" -#include "et1310_pm.h" -#include "et1310_jagcore.h" - -#include "et131x_adapter.h" -#include "et131x_netdev.h" -#include "et131x_config.h" -#include "et131x_isr.h" - -#include "et1310_address_map.h" -#include "et1310_tx.h" -#include "et1310_rx.h" -#include "et1310_mac.h" - -/* Data for debugging facilities */ -extern dbg_info_t *et131x_dbginfo; - -/** - * DumpTxQueueContents - Dump out the tx queue and the shadow pointers - * @pAdapter: pointer to our adapter structure - */ -void DumpTxQueueContents(int dbgLvl, struct et131x_adapter *pAdapter) -{ - MMC_t __iomem *mmc = &pAdapter->CSRAddress->mmc; - uint32_t TxQueueAddr; - - if (DBG_FLAGS(et131x_dbginfo) & dbgLvl) { - for (TxQueueAddr = 0x200; TxQueueAddr < 0x3ff; TxQueueAddr++) { - MMC_SRAM_ACCESS_t sram_access; - - sram_access.value = readl(&mmc->sram_access.value); - sram_access.bits.req_addr = TxQueueAddr; - sram_access.bits.req_access = 1; - writel(sram_access.value, &mmc->sram_access.value); - - DBG_PRINT("Addr 0x%x, Access 0x%08x\t" - "Value 1 0x%08x, Value 2 0x%08x, " - "Value 3 0x%08x, Value 4 0x%08x, \n", - TxQueueAddr, - readl(&mmc->sram_access.value), - readl(&mmc->sram_word1), - readl(&mmc->sram_word2), - readl(&mmc->sram_word3), - readl(&mmc->sram_word4)); - } - - DBG_PRINT("Shadow Pointers 0x%08x\n", - readl(&pAdapter->CSRAddress->txmac.shadow_ptr.value)); - } -} - -/** - * DumpDeviceBlock - * @pAdapter: pointer to our adapter - * - * Dumps the first 64 regs of each block of the et-1310 (each block is - * mapped to a new page, each page is 4096 bytes). - */ -#define NUM_BLOCKS 8 -void DumpDeviceBlock(int dbgLvl, struct et131x_adapter *pAdapter, - uint32_t Block) -{ - uint32_t Address1, Address2; - uint32_t __iomem *BigDevicePointer = - (uint32_t __iomem *) pAdapter->CSRAddress; - const char *BlockNames[NUM_BLOCKS] = { - "Global", "Tx DMA", "Rx DMA", "Tx MAC", - "Rx MAC", "MAC", "MAC Stat", "MMC" - }; - - /* Output the debug counters to the debug terminal */ - if (DBG_FLAGS(et131x_dbginfo) & dbgLvl) { - DBG_PRINT("%s block\n", BlockNames[Block]); - BigDevicePointer += Block * 1024; - for (Address1 = 0; Address1 < 8; Address1++) { - for (Address2 = 0; Address2 < 8; Address2++) { - if (Block == 0 && - (Address1 * 8 + Address2) == 6) { - DBG_PRINT(" ISR , "); - } else { - DBG_PRINT("0x%08x, ", - readl(BigDevicePointer++)); - } - } - DBG_PRINT("\n"); - } - DBG_PRINT("\n"); - } -} - -/** - * DumpDeviceReg - * @pAdapter: pointer to our adapter - * - * Dumps the first 64 regs of each block of the et-1310 (each block is - * mapped to a new page, each page is 4096 bytes). - */ -void DumpDeviceReg(int dbgLvl, struct et131x_adapter *pAdapter) -{ - uint32_t Address1, Address2; - uint32_t Block; - uint32_t __iomem *BigDevicePointer = - (uint32_t __iomem *) pAdapter->CSRAddress; - uint32_t __iomem *Pointer; - const char *BlockNames[NUM_BLOCKS] = { - "Global", "Tx DMA", "Rx DMA", "Tx MAC", - "Rx MAC", "MAC", "MAC Stat", "MMC" - }; - - /* Output the debug counters to the debug terminal */ - if (DBG_FLAGS(et131x_dbginfo) & dbgLvl) { - for (Block = 0; Block < NUM_BLOCKS; Block++) { - DBG_PRINT("%s block\n", BlockNames[Block]); - Pointer = BigDevicePointer + (Block * 1024); - - for (Address1 = 0; Address1 < 8; Address1++) { - for (Address2 = 0; Address2 < 8; Address2++) { - DBG_PRINT("0x%08x, ", - readl(Pointer++)); - } - DBG_PRINT("\n"); - } - DBG_PRINT("\n"); - } - } -} - -#endif // CONFIG_ET131X_DEBUG diff --git a/drivers/staging/et131x/et131x_debug.h b/drivers/staging/et131x/et131x_debug.h deleted file mode 100644 index 994108e..0000000 --- a/drivers/staging/et131x/et131x_debug.h +++ /dev/null @@ -1,255 +0,0 @@ -/* - * Agere Systems Inc. - * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs - * - * Copyright © 2005 Agere Systems Inc. - * All rights reserved. - * http://www.agere.com - * - *------------------------------------------------------------------------------ - * - * et131x_debug.h - Defines, structs, enums, prototypes, etc. used for - * outputting debug messages to the system logging facility - * (ksyslogd) - * - *------------------------------------------------------------------------------ - * - * SOFTWARE LICENSE - * - * This software is provided subject to the following terms and conditions, - * which you should read carefully before using the software. Using this - * software indicates your acceptance of these terms and conditions. If you do - * not agree with these terms and conditions, do not use the software. - * - * Copyright © 2005 Agere Systems Inc. - * All rights reserved. - * - * Redistribution and use in source or binary forms, with or without - * modifications, are permitted provided that the following conditions are met: - * - * . Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following Disclaimer as comments in the code as - * well as in the documentation and/or other materials provided with the - * distribution. - * - * . Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following Disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * . Neither the name of Agere Systems Inc. nor the names of the contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * Disclaimer - * - * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY - * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN - * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH - * DAMAGE. - * - */ - -#ifndef __ET131X_DBG_H__ -#define __ET131X_DBG_H__ - -/* Define Masks for debugging types/levels */ -#define DBG_ERROR_ON 0x00000001L -#define DBG_WARNING_ON 0x00000002L -#define DBG_NOTICE_ON 0x00000004L -#define DBG_TRACE_ON 0x00000008L -#define DBG_VERBOSE_ON 0x00000010L -#define DBG_PARAM_ON 0x00000020L -#define DBG_BREAK_ON 0x00000040L -#define DBG_RX_ON 0x00000100L -#define DBG_TX_ON 0x00000200L - -#ifdef CONFIG_ET131X_DEBUG - -/* - * Set the level of debugging if not done with a preprocessor define. See - * et131x_main.c, function et131x_init_module() for how the debug level - * translates into the types of messages displayed. - */ -#ifndef DBG_LVL -#define DBG_LVL 3 -#endif /* DBG_LVL */ - -#define DBG_DEFAULTS (DBG_ERROR_ON | DBG_WARNING_ON | DBG_BREAK_ON) - -#define DBG_FLAGS(A) ((A)->dbgFlags) -#define DBG_NAME(A) ((A)->dbgName) -#define DBG_LEVEL(A) ((A)->dbgLevel) - -#ifndef DBG_PRINT -#define DBG_PRINT(S...) printk(KERN_DEBUG S) -#endif /* DBG_PRINT */ - -#ifndef DBG_PRINTC -#define DBG_PRINTC(S...) printk(S) -#endif /* DBG_PRINTC */ - -#ifndef DBG_TRAP -#define DBG_TRAP {} /* BUG() */ -#endif /* DBG_TRAP */ - -#define _ENTER_STR ">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>" -#define _LEAVE_STR "<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<" - -#define _DBG_ENTER(A) printk(KERN_DEBUG "%s:%.*s:%s\n", DBG_NAME(A), \ - ++DBG_LEVEL(A), _ENTER_STR, __func__) -#define _DBG_LEAVE(A) printk(KERN_DEBUG "%s:%.*s:%s\n", DBG_NAME(A), \ - DBG_LEVEL(A)--, _LEAVE_STR, __func__) - -#define DBG_ENTER(A) \ - do { \ - if (DBG_FLAGS(A) & DBG_TRACE_ON) \ - _DBG_ENTER(A); \ - } while (0) - -#define DBG_LEAVE(A) \ - do { \ - if (DBG_FLAGS(A) & DBG_TRACE_ON) \ - _DBG_LEAVE(A); \ - } while (0) - -#define DBG_PARAM(A, N, F, S...) \ - do { \ - if (DBG_FLAGS(A) & DBG_PARAM_ON) \ - DBG_PRINT(" %s -- "F" ", N, S); \ - } while (0) - -#define DBG_ERROR(A, S...) \ - do { \ - if (DBG_FLAGS(A) & DBG_ERROR_ON) { \ - DBG_PRINT("%s:ERROR:%s ", DBG_NAME(A), __func__);\ - DBG_PRINTC(S); \ - DBG_TRAP; \ - } \ - } while (0) - -#define DBG_WARNING(A, S...) \ - do { \ - if (DBG_FLAGS(A) & DBG_WARNING_ON) { \ - DBG_PRINT("%s:WARNING:%s ", DBG_NAME(A), __func__); \ - DBG_PRINTC(S); \ - } \ - } while (0) - -#define DBG_NOTICE(A, S...) \ - do { \ - if (DBG_FLAGS(A) & DBG_NOTICE_ON) { \ - DBG_PRINT("%s:NOTICE:%s ", DBG_NAME(A), __func__); \ - DBG_PRINTC(S); \ - } \ - } while (0) - -#define DBG_TRACE(A, S...) \ - do { \ - if (DBG_FLAGS(A) & DBG_TRACE_ON) { \ - DBG_PRINT("%s:TRACE:%s ", DBG_NAME(A), __func__); \ - DBG_PRINTC(S); \ - } \ - } while (0) - -#define DBG_VERBOSE(A, S...) \ - do { \ - if (DBG_FLAGS(A) & DBG_VERBOSE_ON) { \ - DBG_PRINT("%s:VERBOSE:%s ", DBG_NAME(A), __func__); \ - DBG_PRINTC(S); \ - } \ - } while (0) - -#define DBG_RX(A, S...) \ - do { \ - if (DBG_FLAGS(A) & DBG_RX_ON) \ - DBG_PRINT(S); \ - } while (0) - -#define DBG_RX_ENTER(A) \ - do { \ - if (DBG_FLAGS(A) & DBG_RX_ON) \ - _DBG_ENTER(A); \ - } while (0) - -#define DBG_RX_LEAVE(A) \ - do { \ - if (DBG_FLAGS(A) & DBG_RX_ON) \ - _DBG_LEAVE(A); \ - } while (0) - -#define DBG_TX(A, S...) \ - do { \ - if (DBG_FLAGS(A) & DBG_TX_ON) \ - DBG_PRINT(S); \ - } while (0) - -#define DBG_TX_ENTER(A) \ - do { \ - if (DBG_FLAGS(A) & DBG_TX_ON) \ - _DBG_ENTER(A); \ - } while (0) - -#define DBG_TX_LEAVE(A) \ - do { \ - if (DBG_FLAGS(A) & DBG_TX_ON) \ - _DBG_LEAVE(A); \ - } while (0) - -#define DBG_ASSERT(C) \ - do { \ - if (!(C)) { \ - DBG_PRINT("ASSERT(%s) -- %s#%d (%s) ", \ - #C, __FILE__, __LINE__, __func__); \ - DBG_TRAP; \ - } \ - } while (0) - -#define STATIC - -typedef struct { - char *dbgName; - int dbgLevel; - unsigned long dbgFlags; -} dbg_info_t; - -#else /* CONFIG_ET131X_DEBUG */ - -#define DBG_DEFN -#define DBG_TRAP -#define DBG_PRINT(S...) -#define DBG_ENTER(A) -#define DBG_LEAVE(A) -#define DBG_PARAM(A,N,F,S...) -#define DBG_ERROR(A,S...) -#define DBG_WARNING(A,S...) -#define DBG_NOTICE(A,S...) -#define DBG_TRACE(A,S...) -#define DBG_VERBOSE(A,S...) -#define DBG_RX(A,S...) -#define DBG_RX_ENTER(A) -#define DBG_RX_LEAVE(A) -#define DBG_TX(A,S...) -#define DBG_TX_ENTER(A) -#define DBG_TX_LEAVE(A) -#define DBG_ASSERT(C) -#define STATIC static - -#endif /* CONFIG_ET131X_DEBUG */ - -/* Forward declaration of the private adapter structure */ -struct et131x_adapter; - -void DumpTxQueueContents(int dbgLvl, struct et131x_adapter *adapter); -void DumpDeviceBlock(int dbgLvl, struct et131x_adapter *adapter, - unsigned int Block); -void DumpDeviceReg(int dbgLvl, struct et131x_adapter *adapter); - -#endif /* __ET131X_DBG_H__ */ diff --git a/drivers/staging/et131x/et131x_defs.h b/drivers/staging/et131x/et131x_defs.h index 886cb78..f98dca5 100644 --- a/drivers/staging/et131x/et131x_defs.h +++ b/drivers/staging/et131x/et131x_defs.h @@ -2,7 +2,7 @@ * Agere Systems Inc. * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * http://www.agere.com * @@ -20,7 +20,7 @@ * software indicates your acceptance of these terms and conditions. If you do * not agree with these terms and conditions, do not use the software. * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * * Redistribution and use in source or binary forms, with or without @@ -41,7 +41,7 @@ * * Disclaimer * - * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN @@ -61,7 +61,6 @@ /* Packet and header sizes */ #define NIC_MIN_PACKET_SIZE 60 -#define NIC_HEADER_SIZE ETH_HLEN /* 14 */ /* Multicast list size */ #define NIC_MAX_MCAST_LIST 128 @@ -102,27 +101,28 @@ #define fMP_ADAPTER_NOT_READY_MASK 0x3ff00000 /* Some offsets in PCI config space that are actually used. */ -#define ET1310_PCI_PM_CAPABILITY 0x40 -#define ET1310_PCI_PM_CSR 0x44 #define ET1310_PCI_MAX_PYLD 0x4C -#define ET1310_PCI_DEV_CTRL 0x50 -#define ET1310_PCI_DEV_STAT 0x52 #define ET1310_NMI_DISABLE 0x61 #define ET1310_PCI_MAC_ADDRESS 0xA4 #define ET1310_PCI_EEPROM_STATUS 0xB2 -#define ET1310_PCI_PHY_INDEX_REG 0xB4 #define ET1310_PCI_ACK_NACK 0xC0 #define ET1310_PCI_REPLAY 0xC2 #define ET1310_PCI_L0L1LATENCY 0xCF -#define ET1310_PCI_SEL_PHY_CTRL 0xE4 -#define ET1310_PCI_ADVANCED_ERR 0x100 /* PCI Vendor/Product IDs */ -#define ET131X_PCI_VENDOR_ID 0x11C1 // Agere Systems -#define ET131X_PCI_DEVICE_ID_GIG 0xED00 // ET1310 1000 Base-T -#define ET131X_PCI_DEVICE_ID_FAST 0xED01 // ET1310 100 Base-T +#define ET131X_PCI_VENDOR_ID 0x11C1 /* Agere Systems */ +#define ET131X_PCI_DEVICE_ID_GIG 0xED00 /* ET1310 1000 Base-T 8 */ +#define ET131X_PCI_DEVICE_ID_FAST 0xED01 /* ET1310 100 Base-T */ /* Define order of magnitude converter */ #define NANO_IN_A_MICRO 1000 +#define PARM_RX_NUM_BUFS_DEF 4 +#define PARM_RX_TIME_INT_DEF 10 +#define PARM_RX_MEM_END_DEF 0x2bc +#define PARM_TX_TIME_INT_DEF 40 +#define PARM_TX_NUM_BUFS_DEF 4 +#define PARM_DMA_CACHE_DEF 0 + + #endif /* __ET131X_DEFS_H__ */ diff --git a/drivers/staging/et131x/et131x_initpci.c b/drivers/staging/et131x/et131x_initpci.c index a18c499..9db2056 100644 --- a/drivers/staging/et131x/et131x_initpci.c +++ b/drivers/staging/et131x/et131x_initpci.c @@ -2,7 +2,7 @@ * Agere Systems Inc. * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * http://www.agere.com * @@ -21,7 +21,7 @@ * software indicates your acceptance of these terms and conditions. If you do * not agree with these terms and conditions, do not use the software. * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * * Redistribution and use in source or binary forms, with or without @@ -42,7 +42,7 @@ * * Disclaimer * - * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN @@ -58,7 +58,6 @@ */ #include "et131x_version.h" -#include "et131x_debug.h" #include "et131x_defs.h" #include <linux/pci.h> @@ -76,9 +75,9 @@ #include <linux/interrupt.h> #include <linux/in.h> #include <linux/delay.h> -#include <asm/io.h> +#include <linux/io.h> +#include <linux/bitops.h> #include <asm/system.h> -#include <asm/bitops.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> @@ -103,130 +102,34 @@ #include "et1310_eeprom.h" -int __devinit et131x_pci_setup(struct pci_dev *pdev, - const struct pci_device_id *ent); -void __devexit et131x_pci_remove(struct pci_dev *pdev); - - -/* Modinfo parameters (filled out using defines from et131x_version.h) */ -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_INFO); -MODULE_LICENSE(DRIVER_LICENSE); - -/* Module Parameters and related data for debugging facilities */ -#ifdef CONFIG_ET131X_DEBUG -static u32 et131x_debug_level = DBG_LVL; -static u32 et131x_debug_flags = DBG_DEFAULTS; - -/* -et131x_debug_level : - Level of debugging desired (0-7) - 7 : DBG_RX_ON | DBG_TX_ON - 6 : DBG_PARAM_ON - 5 : DBG_VERBOSE_ON - 4 : DBG_TRACE_ON - 3 : DBG_NOTICE_ON - 2 : no debug info - 1 : no debug info - 0 : no debug info -*/ - -module_param(et131x_debug_level, uint, 0); -module_param(et131x_debug_flags, uint, 0); - -MODULE_PARM_DESC(et131x_debug_level, "Level of debugging desired (0-7)"); - -static dbg_info_t et131x_info = { DRIVER_NAME_EXT, 0, 0 }; -dbg_info_t *et131x_dbginfo = &et131x_info; -#endif /* CONFIG_ET131X_DEBUG */ - -static struct pci_device_id et131x_pci_table[] __devinitdata = { - {ET131X_PCI_VENDOR_ID, ET131X_PCI_DEVICE_ID_GIG, PCI_ANY_ID, - PCI_ANY_ID, 0, 0, 0UL}, - {ET131X_PCI_VENDOR_ID, ET131X_PCI_DEVICE_ID_FAST, PCI_ANY_ID, - PCI_ANY_ID, 0, 0, 0UL}, - {0,} -}; - -MODULE_DEVICE_TABLE(pci, et131x_pci_table); - -static struct pci_driver et131x_driver = { - .name = DRIVER_NAME, - .id_table = et131x_pci_table, - .probe = et131x_pci_setup, - .remove = __devexit_p(et131x_pci_remove), - .suspend = NULL, //et131x_pci_suspend, - .resume = NULL, //et131x_pci_resume, -}; - - -/** - * et131x_init_module - The "main" entry point called on driver initialization - * - * Returns 0 on success, errno on failure (as defined in errno.h) - */ -int et131x_init_module(void) -{ - int result; - -#ifdef CONFIG_ET131X_DEBUG - /* Set the level of debug messages displayed using the module - * parameter - */ - et131x_dbginfo->dbgFlags = et131x_debug_flags; - - switch (et131x_debug_level) { - case 7: - et131x_dbginfo->dbgFlags |= (DBG_RX_ON | DBG_TX_ON); - - case 6: - et131x_dbginfo->dbgFlags |= DBG_PARAM_ON; - - case 5: - et131x_dbginfo->dbgFlags |= DBG_VERBOSE_ON; - - case 4: - et131x_dbginfo->dbgFlags |= DBG_TRACE_ON; - - case 3: - et131x_dbginfo->dbgFlags |= DBG_NOTICE_ON; - - case 2: - case 1: - case 0: - default: - break; - } -#endif /* CONFIG_ET131X_DEBUG */ - - DBG_ENTER(et131x_dbginfo); - DBG_PRINT("%s\n", DRIVER_INFO); - - result = pci_register_driver(&et131x_driver); +/* Defines for Parameter Default/Min/Max vaules */ +#define PARM_SPEED_DUPLEX_MIN 0 +#define PARM_SPEED_DUPLEX_MAX 5 - DBG_LEAVE(et131x_dbginfo); - return result; -} - -/** - * et131x_cleanup_module - The entry point called on driver cleanup +/* Module parameter for disabling NMI + * et131x_nmi_disable : + * Disable NMI (0-2) [0] + * 0 : + * 1 : + * 2 : */ -void et131x_cleanup_module(void) -{ - DBG_ENTER(et131x_dbginfo); - - pci_unregister_driver(&et131x_driver); - - DBG_LEAVE(et131x_dbginfo); -} - -/* - * These macros map the driver-specific init_module() and cleanup_module() - * routines so they can be called by the kernel. +static u32 et131x_nmi_disable; /* 0-2 */ +module_param(et131x_nmi_disable, uint, 0); +MODULE_PARM_DESC(et131x_nmi_disable, "Disable NMI (0-2) [0]"); + +/* Module parameter for manual speed setting + * Set Link speed and dublex manually (0-5) [0] + * 1 : 10Mb Half-Duplex + * 2 : 10Mb Full-Duplex + * 3 : 100Mb Half-Duplex + * 4 : 100Mb Full-Duplex + * 5 : 1000Mb Full-Duplex + * 0 : Auto Speed Auto Duplex // default */ -module_init(et131x_init_module); -module_exit(et131x_cleanup_module); - +static u32 et131x_speed_set; +module_param(et131x_speed_set, uint, 0); +MODULE_PARM_DESC(et131x_speed_set, + "Set Link speed and dublex manually (0-5) [0] \n 1 : 10Mb Half-Duplex \n 2 : 10Mb Full-Duplex \n 3 : 100Mb Half-Duplex \n 4 : 100Mb Full-Duplex \n 5 : 1000Mb Full-Duplex \n 0 : Auto Speed Auto Dublex"); /** * et131x_find_adapter - Find the adapter and get all the assigned resources @@ -240,8 +143,7 @@ int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev) uint8_t eepromStat; uint8_t maxPayload = 0; uint8_t read_size_reg; - - DBG_ENTER(et131x_dbginfo); + u8 rev; /* Allow disabling of Non-Maskable Interrupts in I/O space, to * support validation. @@ -252,9 +154,8 @@ int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev) RegisterVal = inb(ET1310_NMI_DISABLE); RegisterVal &= 0xf3; - if (adapter->RegistryNMIDisable == 2) { + if (adapter->RegistryNMIDisable == 2) RegisterVal |= 0xc; - } outb(ET1310_NMI_DISABLE, RegisterVal); } @@ -266,7 +167,7 @@ int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev) &eepromStat); /* THIS IS A WORKAROUND: - * I need to call this function twice to get my card in a + * I need to call this function twice to get my card in a * LG M1 Express Dual running. I tried also a msleep before this * function, because I thougth there could be some time condidions * but it didn't work. Call the whole function twice also work. @@ -274,9 +175,8 @@ int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev) result = pci_read_config_byte(pdev, ET1310_PCI_EEPROM_STATUS, &eepromStat); if (result != PCIBIOS_SUCCESSFUL) { - DBG_ERROR(et131x_dbginfo, "Could not read PCI config space for " + dev_err(&pdev->dev, "Could not read PCI config space for " "EEPROM Status\n"); - DBG_LEAVE(et131x_dbginfo); return -EIO; } @@ -284,30 +184,26 @@ int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev) * present, we need to fail. */ if (eepromStat & 0x4C) { - result = pci_read_config_byte(pdev, PCI_REVISION_ID, - &adapter->RevisionID); + result = pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); if (result != PCIBIOS_SUCCESSFUL) { - DBG_ERROR(et131x_dbginfo, + dev_err(&pdev->dev, "Could not read PCI config space for " "Revision ID\n"); - DBG_LEAVE(et131x_dbginfo); return -EIO; - } else if (adapter->RevisionID == 0x01) { + } else if (rev == 0x01) { int32_t nLoop; - uint8_t ucTemp[4] = { 0xFE, 0x13, 0x10, 0xFF }; + uint8_t temp[4] = { 0xFE, 0x13, 0x10, 0xFF }; /* Re-write the first 4 bytes if we have an eeprom * present and the revision id is 1, this fixes the * corruption seen with 1310 B Silicon */ for (nLoop = 0; nLoop < 3; nLoop++) { - EepromWriteByte(adapter, nLoop, ucTemp[nLoop], - 0, SINGLE_BYTE); + EepromWriteByte(adapter, nLoop, temp[nLoop]); } } - DBG_ERROR(et131x_dbginfo, - "Fatal EEPROM Status Error - 0x%04x\n", eepromStat); + dev_err(&pdev->dev, "Fatal EEPROM Status Error - 0x%04x\n", eepromStat); /* This error could mean that there was an error reading the * eeprom or that the eeprom doesn't exist. We will treat @@ -315,39 +211,33 @@ int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev) * information that normally would come from the eeprom, like * MAC Address */ - adapter->bEepromPresent = false; - - DBG_LEAVE(et131x_dbginfo); + adapter->has_eeprom = 0; return -EIO; - } else { - DBG_TRACE(et131x_dbginfo, "EEPROM Status Code - 0x%04x\n", - eepromStat); - adapter->bEepromPresent = true; - } + } else + adapter->has_eeprom = 1; /* Read the EEPROM for information regarding LED behavior. Refer to * ET1310_phy.c, et131x_xcvr_init(), for its use. */ - EepromReadByte(adapter, 0x70, &adapter->eepromData[0], 0, SINGLE_BYTE); - EepromReadByte(adapter, 0x71, &adapter->eepromData[1], 0, SINGLE_BYTE); + EepromReadByte(adapter, 0x70, &adapter->eepromData[0]); + EepromReadByte(adapter, 0x71, &adapter->eepromData[1]); - if (adapter->eepromData[0] != 0xcd) { - adapter->eepromData[1] = 0x00; // Disable all optional features - } + if (adapter->eepromData[0] != 0xcd) + /* Disable all optional features */ + adapter->eepromData[1] = 0x00; /* Let's set up the PORT LOGIC Register. First we need to know what * the max_payload_size is */ result = pci_read_config_byte(pdev, ET1310_PCI_MAX_PYLD, &maxPayload); if (result != PCIBIOS_SUCCESSFUL) { - DBG_ERROR(et131x_dbginfo, "Could not read PCI config space for " - "Max Payload Size\n"); - DBG_LEAVE(et131x_dbginfo); + dev_err(&pdev->dev, + "Could not read PCI config space for Max Payload Size\n"); return -EIO; } /* Program the Ack/Nak latency and replay timers */ - maxPayload &= 0x07; // Only the lower 3 bits are valid + maxPayload &= 0x07; /* Only the lower 3 bits are valid */ if (maxPayload < 2) { const uint16_t AckNak[2] = { 0x76, 0xD0 }; @@ -356,20 +246,16 @@ int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev) result = pci_write_config_word(pdev, ET1310_PCI_ACK_NACK, AckNak[maxPayload]); if (result != PCIBIOS_SUCCESSFUL) { - DBG_ERROR(et131x_dbginfo, - "Could not write PCI config space " - "for ACK/NAK\n"); - DBG_LEAVE(et131x_dbginfo); + dev_err(&pdev->dev, + "Could not write PCI config space for ACK/NAK\n"); return -EIO; } result = pci_write_config_word(pdev, ET1310_PCI_REPLAY, Replay[maxPayload]); if (result != PCIBIOS_SUCCESSFUL) { - DBG_ERROR(et131x_dbginfo, - "Could not write PCI config space " - "for Replay Timer\n"); - DBG_LEAVE(et131x_dbginfo); + dev_err(&pdev->dev, + "Could not write PCI config space for Replay Timer\n"); return -EIO; } } @@ -379,19 +265,16 @@ int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev) */ result = pci_write_config_byte(pdev, ET1310_PCI_L0L1LATENCY, 0x11); if (result != PCIBIOS_SUCCESSFUL) { - DBG_ERROR(et131x_dbginfo, - "Could not write PCI config space for " - "Latency Timers\n"); - DBG_LEAVE(et131x_dbginfo); + dev_err(&pdev->dev, + "Could not write PCI config space for Latency Timers\n"); return -EIO; } /* Change the max read size to 2k */ result = pci_read_config_byte(pdev, 0x51, &read_size_reg); if (result != PCIBIOS_SUCCESSFUL) { - DBG_ERROR(et131x_dbginfo, - "Could not read PCI config space for Max read size\n"); - DBG_LEAVE(et131x_dbginfo); + dev_err(&pdev->dev, + "Could not read PCI config space for Max read size\n"); return -EIO; } @@ -400,26 +283,15 @@ int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev) result = pci_write_config_byte(pdev, 0x51, read_size_reg); if (result != PCIBIOS_SUCCESSFUL) { - DBG_ERROR(et131x_dbginfo, - "Could not write PCI config space for Max read size\n"); - DBG_LEAVE(et131x_dbginfo); - return -EIO; - } - - /* PCI Express Configuration registers 0x48-0x5B (Device Control) */ - result = pci_read_config_word(pdev, ET1310_PCI_DEV_CTRL, - &adapter->PciXDevCtl); - if (result != PCIBIOS_SUCCESSFUL) { - DBG_ERROR(et131x_dbginfo, - "Could not read PCI config space for PCI Express Dev Ctl\n"); - DBG_LEAVE(et131x_dbginfo); + dev_err(&pdev->dev, + "Could not write PCI config space for Max read size\n"); return -EIO; } /* Get MAC address from config space if an eeprom exists, otherwise * the MAC address there will not be valid */ - if (adapter->bEepromPresent) { + if (adapter->has_eeprom) { int i; for (i = 0; i < ETH_ALEN; i++) { @@ -427,15 +299,11 @@ int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev) pdev, ET1310_PCI_MAC_ADDRESS + i, adapter->PermanentAddress + i); if (result != PCIBIOS_SUCCESSFUL) { - DBG_ERROR(et131x_dbginfo, - "Could not read PCI config space for MAC address\n"); - DBG_LEAVE(et131x_dbginfo); + dev_err(&pdev->dev, ";Could not read PCI config space for MAC address\n"); return -EIO; } } } - - DBG_LEAVE(et131x_dbginfo); return 0; } @@ -448,42 +316,39 @@ int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev) */ void et131x_error_timer_handler(unsigned long data) { - struct et131x_adapter *pAdapter = (struct et131x_adapter *) data; - PM_CSR_t pm_csr; + struct et131x_adapter *etdev = (struct et131x_adapter *) data; + u32 pm_csr; - pm_csr.value = readl(&pAdapter->CSRAddress->global.pm_csr.value); + pm_csr = readl(&etdev->regs->global.pm_csr); - if (pm_csr.bits.pm_phy_sw_coma == 0) { - if (pAdapter->RegistryMACStat) { - UpdateMacStatHostCounters(pAdapter); - } - } else { - DBG_VERBOSE(et131x_dbginfo, - "No interrupts, in PHY coma, pm_csr = 0x%x\n", - pm_csr.value); - } + if ((pm_csr & ET_PM_PHY_SW_COMA) == 0) + UpdateMacStatHostCounters(etdev); + else + dev_err(&etdev->pdev->dev, + "No interrupts, in PHY coma, pm_csr = 0x%x\n", pm_csr); - if (!pAdapter->Bmsr.bits.link_status && - pAdapter->RegistryPhyComa && - pAdapter->PoMgmt.TransPhyComaModeOnBoot < 11) { - pAdapter->PoMgmt.TransPhyComaModeOnBoot++; + if (!etdev->Bmsr.bits.link_status && + etdev->RegistryPhyComa && + etdev->PoMgmt.TransPhyComaModeOnBoot < 11) { + etdev->PoMgmt.TransPhyComaModeOnBoot++; } - if (pAdapter->PoMgmt.TransPhyComaModeOnBoot == 10) { - if (!pAdapter->Bmsr.bits.link_status - && pAdapter->RegistryPhyComa) { - if (pm_csr.bits.pm_phy_sw_coma == 0) { - // NOTE - This was originally a 'sync with interrupt'. How - // to do that under Linux? - et131x_enable_interrupts(pAdapter); - EnablePhyComa(pAdapter); + if (etdev->PoMgmt.TransPhyComaModeOnBoot == 10) { + if (!etdev->Bmsr.bits.link_status + && etdev->RegistryPhyComa) { + if ((pm_csr & ET_PM_PHY_SW_COMA) == 0) { + /* NOTE - This was originally a 'sync with + * interrupt'. How to do that under Linux? + */ + et131x_enable_interrupts(etdev); + EnablePhyComa(etdev); } } } /* This is a periodic timer, so reschedule */ - mod_timer(&pAdapter->ErrorTimer, jiffies + - TX_ERROR_PERIOD * HZ / 1000); + mod_timer(&etdev->ErrorTimer, jiffies + + TX_ERROR_PERIOD * HZ / 1000); } /** @@ -493,85 +358,143 @@ void et131x_error_timer_handler(unsigned long data) */ void et131x_link_detection_handler(unsigned long data) { - struct et131x_adapter *pAdapter = (struct et131x_adapter *) data; - unsigned long lockflags; + struct et131x_adapter *etdev = (struct et131x_adapter *) data; + unsigned long flags; - /* Let everyone know that we have run */ - pAdapter->bLinkTimerActive = false; + if (etdev->MediaState == 0) { + spin_lock_irqsave(&etdev->Lock, flags); - if (pAdapter->MediaState == 0) { - spin_lock_irqsave(&pAdapter->Lock, lockflags); + etdev->MediaState = NETIF_STATUS_MEDIA_DISCONNECT; + etdev->Flags &= ~fMP_ADAPTER_LINK_DETECTION; - pAdapter->MediaState = NETIF_STATUS_MEDIA_DISCONNECT; - MP_CLEAR_FLAG(pAdapter, fMP_ADAPTER_LINK_DETECTION); + spin_unlock_irqrestore(&etdev->Lock, flags); - spin_unlock_irqrestore(&pAdapter->Lock, lockflags); + netif_carrier_off(etdev->netdev); + } +} - netif_carrier_off(pAdapter->netdev); +/** + * et131x_configure_global_regs - configure JAGCore global regs + * @etdev: pointer to our adapter structure + * + * Used to configure the global registers on the JAGCore + */ +void ConfigGlobalRegs(struct et131x_adapter *etdev) +{ + struct _GLOBAL_t __iomem *regs = &etdev->regs->global; + + if (etdev->RegistryPhyLoopbk == false) { + if (etdev->RegistryJumboPacket < 2048) { + /* Tx / RxDMA and Tx/Rx MAC interfaces have a 1k word + * block of RAM that the driver can split between Tx + * and Rx as it desires. Our default is to split it + * 50/50: + */ + writel(0, ®s->rxq_start_addr); + writel(PARM_RX_MEM_END_DEF, ®s->rxq_end_addr); + writel(PARM_RX_MEM_END_DEF + 1, ®s->txq_start_addr); + writel(INTERNAL_MEM_SIZE - 1, ®s->txq_end_addr); + } else if (etdev->RegistryJumboPacket < 8192) { + /* For jumbo packets > 2k but < 8k, split 50-50. */ + writel(0, ®s->rxq_start_addr); + writel(INTERNAL_MEM_RX_OFFSET, ®s->rxq_end_addr); + writel(INTERNAL_MEM_RX_OFFSET + 1, ®s->txq_start_addr); + writel(INTERNAL_MEM_SIZE - 1, ®s->txq_end_addr); + } else { + /* 9216 is the only packet size greater than 8k that + * is available. The Tx buffer has to be big enough + * for one whole packet on the Tx side. We'll make + * the Tx 9408, and give the rest to Rx + */ + writel(0x0000, ®s->rxq_start_addr); + writel(0x01b3, ®s->rxq_end_addr); + writel(0x01b4, ®s->txq_start_addr); + writel(INTERNAL_MEM_SIZE - 1,®s->txq_end_addr); + } + + /* Initialize the loopback register. Disable all loopbacks. */ + writel(0, ®s->loopback); + } else { + /* For PHY Line loopback, the memory is configured as if Tx + * and Rx both have all the memory. This is because the + * RxMAC will write data into the space, and the TxMAC will + * read it out. + */ + writel(0, ®s->rxq_start_addr); + writel(INTERNAL_MEM_SIZE - 1, ®s->rxq_end_addr); + writel(0, ®s->txq_start_addr); + writel(INTERNAL_MEM_SIZE - 1, ®s->txq_end_addr); - pAdapter->bSetPending = false; + /* Initialize the loopback register (MAC loopback). */ + writel(ET_LOOP_MAC, ®s->loopback); } + + /* MSI Register */ + writel(0, ®s->msi_config); + + /* By default, disable the watchdog timer. It will be enabled when + * a packet is queued. + */ + writel(0, ®s->watchdog_timer); } + /** * et131x_adapter_setup - Set the adapter up as per cassini+ documentation * @adapter: pointer to our private adapter structure * * Returns 0 on success, errno on failure (as defined in errno.h) */ -int et131x_adapter_setup(struct et131x_adapter *pAdapter) +int et131x_adapter_setup(struct et131x_adapter *etdev) { int status = 0; - DBG_ENTER(et131x_dbginfo); - /* Configure the JAGCore */ - ConfigGlobalRegs(pAdapter); + ConfigGlobalRegs(etdev); - ConfigMACRegs1(pAdapter); - ConfigMMCRegs(pAdapter); + ConfigMACRegs1(etdev); - ConfigRxMacRegs(pAdapter); - ConfigTxMacRegs(pAdapter); + /* Configure the MMC registers */ + /* All we need to do is initialize the Memory Control Register */ + writel(ET_MMC_ENABLE, &etdev->regs->mmc.mmc_ctrl); - ConfigRxDmaRegs(pAdapter); - ConfigTxDmaRegs(pAdapter); + ConfigRxMacRegs(etdev); + ConfigTxMacRegs(etdev); - ConfigMacStatRegs(pAdapter); + ConfigRxDmaRegs(etdev); + ConfigTxDmaRegs(etdev); + + ConfigMacStatRegs(etdev); /* Move the following code to Timer function?? */ - status = et131x_xcvr_find(pAdapter); + status = et131x_xcvr_find(etdev); - if (status != 0) { - DBG_WARNING(et131x_dbginfo, "Could not find the xcvr\n"); - } + if (status != 0) + dev_warn(&etdev->pdev->dev, "Could not find the xcvr\n"); /* Prepare the TRUEPHY library. */ - ET1310_PhyInit(pAdapter); + ET1310_PhyInit(etdev); /* Reset the phy now so changes take place */ - ET1310_PhyReset(pAdapter); + ET1310_PhyReset(etdev); /* Power down PHY */ - ET1310_PhyPowerDown(pAdapter, 1); + ET1310_PhyPowerDown(etdev, 1); /* * We need to turn off 1000 base half dulplex, the mac does not * support it. For the 10/100 part, turn off all gig advertisement */ - if (pAdapter->DeviceID != ET131X_PCI_DEVICE_ID_FAST) { - ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_FULL); - } else { - ET1310_PhyAdvertise1000BaseT(pAdapter, TRUEPHY_ADV_DUPLEX_NONE); - } + if (etdev->pdev->device != ET131X_PCI_DEVICE_ID_FAST) + ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_FULL); + else + ET1310_PhyAdvertise1000BaseT(etdev, TRUEPHY_ADV_DUPLEX_NONE); /* Power up PHY */ - ET1310_PhyPowerDown(pAdapter, 0); - - et131x_setphy_normal(pAdapter); + ET1310_PhyPowerDown(etdev, 0); - DBG_LEAVE(et131x_dbginfo); - return status; + et131x_setphy_normal(etdev); +; return status; } /** @@ -580,44 +503,37 @@ int et131x_adapter_setup(struct et131x_adapter *pAdapter) */ void et131x_setup_hardware_properties(struct et131x_adapter *adapter) { - DBG_ENTER(et131x_dbginfo); - /* If have our default mac from registry and no mac address from * EEPROM then we need to generate the last octet and set it on the * device */ - if (!adapter->bOverrideAddress) { - if (adapter->PermanentAddress[0] == 0x00 && - adapter->PermanentAddress[1] == 0x00 && - adapter->PermanentAddress[2] == 0x00 && - adapter->PermanentAddress[3] == 0x00 && - adapter->PermanentAddress[4] == 0x00 && - adapter->PermanentAddress[5] == 0x00) { - /* - * We need to randomly generate the last octet so we - * decrease our chances of setting the mac address to - * same as another one of our cards in the system - */ - get_random_bytes(&adapter->CurrentAddress[5], 1); - - /* - * We have the default value in the register we are - * working with so we need to copy the current - * address into the permanent address - */ - memcpy(adapter->PermanentAddress, - adapter->CurrentAddress, ETH_ALEN); - } else { - /* We do not have an override address, so set the - * current address to the permanent address and add - * it to the device - */ - memcpy(adapter->CurrentAddress, - adapter->PermanentAddress, ETH_ALEN); - } + if (adapter->PermanentAddress[0] == 0x00 && + adapter->PermanentAddress[1] == 0x00 && + adapter->PermanentAddress[2] == 0x00 && + adapter->PermanentAddress[3] == 0x00 && + adapter->PermanentAddress[4] == 0x00 && + adapter->PermanentAddress[5] == 0x00) { + /* + * We need to randomly generate the last octet so we + * decrease our chances of setting the mac address to + * same as another one of our cards in the system + */ + get_random_bytes(&adapter->CurrentAddress[5], 1); + /* + * We have the default value in the register we are + * working with so we need to copy the current + * address into the permanent address + */ + memcpy(adapter->PermanentAddress, + adapter->CurrentAddress, ETH_ALEN); + } else { + /* We do not have an override address, so set the + * current address to the permanent address and add + * it to the device + */ + memcpy(adapter->CurrentAddress, + adapter->PermanentAddress, ETH_ALEN); } - - DBG_LEAVE(et131x_dbginfo); } /** @@ -626,17 +542,13 @@ void et131x_setup_hardware_properties(struct et131x_adapter *adapter) */ void et131x_soft_reset(struct et131x_adapter *adapter) { - DBG_ENTER(et131x_dbginfo); - /* Disable MAC Core */ - writel(0xc00f0000, &adapter->CSRAddress->mac.cfg1.value); + writel(0xc00f0000, &adapter->regs->mac.cfg1.value); /* Set everything to a reset value */ - writel(0x7F, &adapter->CSRAddress->global.sw_reset.value); - writel(0x000f0000, &adapter->CSRAddress->mac.cfg1.value); - writel(0x00000000, &adapter->CSRAddress->mac.cfg1.value); - - DBG_LEAVE(et131x_dbginfo); + writel(0x7F, &adapter->regs->global.sw_reset); + writel(0x000f0000, &adapter->regs->mac.cfg1.value); + writel(0x00000000, &adapter->regs->mac.cfg1.value); } /** @@ -652,8 +564,6 @@ void et131x_align_allocated_memory(struct et131x_adapter *adapter, { uint64_t new_addr; - DBG_ENTER(et131x_dbginfo); - *offset = 0; new_addr = *phys_addr & ~mask; @@ -666,8 +576,6 @@ void et131x_align_allocated_memory(struct et131x_adapter *adapter, /* Return new physical address */ *phys_addr = new_addr; } - - DBG_LEAVE(et131x_dbginfo); } /** @@ -682,13 +590,11 @@ int et131x_adapter_memory_alloc(struct et131x_adapter *adapter) { int status = 0; - DBG_ENTER(et131x_dbginfo); - do { /* Allocate memory for the Tx Ring */ status = et131x_tx_dma_memory_alloc(adapter); if (status != 0) { - DBG_ERROR(et131x_dbginfo, + dev_err(&adapter->pdev->dev, "et131x_tx_dma_memory_alloc FAILED\n"); break; } @@ -696,7 +602,7 @@ int et131x_adapter_memory_alloc(struct et131x_adapter *adapter) /* Receive buffer memory allocation */ status = et131x_rx_dma_memory_alloc(adapter); if (status != 0) { - DBG_ERROR(et131x_dbginfo, + dev_err(&adapter->pdev->dev, "et131x_rx_dma_memory_alloc FAILED\n"); et131x_tx_dma_memory_free(adapter); break; @@ -705,14 +611,13 @@ int et131x_adapter_memory_alloc(struct et131x_adapter *adapter) /* Init receive data structures */ status = et131x_init_recv(adapter); if (status != 0) { - DBG_ERROR(et131x_dbginfo, "et131x_init_recv FAILED\n"); + dev_err(&adapter->pdev->dev, + "et131x_init_recv FAILED\n"); et131x_tx_dma_memory_free(adapter); et131x_rx_dma_memory_free(adapter); break; } } while (0); - - DBG_LEAVE(et131x_dbginfo); return status; } @@ -722,15 +627,56 @@ int et131x_adapter_memory_alloc(struct et131x_adapter *adapter) */ void et131x_adapter_memory_free(struct et131x_adapter *adapter) { - DBG_ENTER(et131x_dbginfo); - /* Free DMA memory */ et131x_tx_dma_memory_free(adapter); et131x_rx_dma_memory_free(adapter); +} + +/** + * et131x_config_parse + * @etdev: pointer to the private adapter struct + * + * Parses a configuration from some location (module parameters, for example) + * into the private adapter struct. This really has no sensible analogy in + * Linux as sysfs parameters are dynamic. Several things that were hee could + * go into sysfs, but other stuff like speed handling is part of the mii + * interfaces/ethtool. + */ +void et131x_config_parse(struct et131x_adapter *etdev) +{ + static const u8 default_mac[] = { 0x00, 0x05, 0x3d, 0x00, 0x02, 0x00 }; + static const u8 duplex[] = { 0, 1, 2, 1, 2, 2 }; + static const u16 speed[] = { 0, 10, 10, 100, 100, 1000 }; + + if (et131x_speed_set) + dev_info(&etdev->pdev->dev, + "Speed set manually to : %d \n", et131x_speed_set); + + etdev->SpeedDuplex = et131x_speed_set; + etdev->RegistryJumboPacket = 1514; /* 1514-9216 */ - DBG_LEAVE(et131x_dbginfo); + etdev->RegistryNMIDisable = et131x_nmi_disable; + + /* Set the MAC address to a default */ + memcpy(etdev->CurrentAddress, default_mac, ETH_ALEN); + + /* Decode SpeedDuplex + * + * Set up as if we are auto negotiating always and then change if we + * go into force mode + * + * If we are the 10/100 device, and gigabit is somehow requested then + * knock it down to 100 full. + */ + if (etdev->pdev->device == ET131X_PCI_DEVICE_ID_FAST && + etdev->SpeedDuplex == 5) + etdev->SpeedDuplex = 4; + + etdev->AiForceSpeed = speed[etdev->SpeedDuplex]; + etdev->AiForceDpx = duplex[etdev->SpeedDuplex]; /* Auto FDX */ } + /** * et131x_pci_remove * @pdev: a pointer to the device's pci_dev structure @@ -739,13 +685,12 @@ void et131x_adapter_memory_free(struct et131x_adapter *adapter) * PCI subsystem detects that a PCI device which matches the information * contained in the pci_device_id table has been removed. */ + void __devexit et131x_pci_remove(struct pci_dev *pdev) { struct net_device *netdev; struct et131x_adapter *adapter; - DBG_ENTER(et131x_dbginfo); - /* Retrieve the net_device pointer from the pci_dev struct, as well * as the private adapter struct */ @@ -755,14 +700,14 @@ void __devexit et131x_pci_remove(struct pci_dev *pdev) /* Perform device cleanup */ unregister_netdev(netdev); et131x_adapter_memory_free(adapter); - iounmap(adapter->CSRAddress); + iounmap(adapter->regs); + pci_dev_put(adapter->pdev); free_netdev(netdev); pci_release_regions(pdev); pci_disable_device(pdev); - - DBG_LEAVE(et131x_dbginfo); } + /** * et131x_pci_setup - Perform device initialization * @pdev: a pointer to the device's pci_dev structure @@ -775,6 +720,7 @@ void __devexit et131x_pci_remove(struct pci_dev *pdev) * contained in the pci_device_id table. This routine is the equivalent to * a device insertion routine. */ + int __devinit et131x_pci_setup(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -784,18 +730,17 @@ int __devinit et131x_pci_setup(struct pci_dev *pdev, struct net_device *netdev = NULL; struct et131x_adapter *adapter = NULL; - DBG_ENTER(et131x_dbginfo); - /* Enable the device via the PCI subsystem */ result = pci_enable_device(pdev); if (result != 0) { - DBG_ERROR(et131x_dbginfo, "pci_enable_device() failed\n"); + dev_err(&adapter->pdev->dev, + "pci_enable_device() failed\n"); goto out; } /* Perform some basic PCI checks */ if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { - DBG_ERROR(et131x_dbginfo, + dev_err(&adapter->pdev->dev, "Can't find PCI device's base address\n"); result = -ENODEV; goto out; @@ -803,12 +748,12 @@ int __devinit et131x_pci_setup(struct pci_dev *pdev, result = pci_request_regions(pdev, DRIVER_NAME); if (result != 0) { - DBG_ERROR(et131x_dbginfo, "Can't get PCI resources\n"); + dev_err(&adapter->pdev->dev, + "Can't get PCI resources\n"); goto err_disable; } /* Enable PCI bus mastering */ - DBG_TRACE(et131x_dbginfo, "Setting PCI Bus Mastering...\n"); pci_set_master(pdev); /* Query PCI for Power Mgmt Capabilities @@ -818,7 +763,7 @@ int __devinit et131x_pci_setup(struct pci_dev *pdev, */ pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM); if (pm_cap == 0) { - DBG_ERROR(et131x_dbginfo, + dev_err(&adapter->pdev->dev, "Cannot find Power Management capabilities\n"); result = -EIO; goto err_release_res; @@ -826,44 +771,40 @@ int __devinit et131x_pci_setup(struct pci_dev *pdev, /* Check the DMA addressing support of this device */ if (!pci_set_dma_mask(pdev, 0xffffffffffffffffULL)) { - DBG_TRACE(et131x_dbginfo, "64-bit DMA addressing supported\n"); pci_using_dac = true; result = pci_set_consistent_dma_mask(pdev, 0xffffffffffffffffULL); if (result != 0) { - DBG_ERROR(et131x_dbginfo, + dev_err(&pdev->dev, "Unable to obtain 64 bit DMA for consistent allocations\n"); goto err_release_res; } } else if (!pci_set_dma_mask(pdev, 0xffffffffULL)) { - DBG_TRACE(et131x_dbginfo, - "64-bit DMA addressing NOT supported\n"); - DBG_TRACE(et131x_dbginfo, - "32-bit DMA addressing will be used\n"); pci_using_dac = false; } else { - DBG_ERROR(et131x_dbginfo, "No usable DMA addressing method\n"); + dev_err(&adapter->pdev->dev, + "No usable DMA addressing method\n"); result = -EIO; goto err_release_res; } /* Allocate netdev and private adapter structs */ - DBG_TRACE(et131x_dbginfo, - "Allocate netdev and private adapter structs...\n"); netdev = et131x_device_alloc(); if (netdev == NULL) { - DBG_ERROR(et131x_dbginfo, "Couldn't alloc netdev struct\n"); + dev_err(&adapter->pdev->dev, + "Couldn't alloc netdev struct\n"); result = -ENOMEM; goto err_release_res; } /* Setup the fundamental net_device and private adapter structure elements */ - DBG_TRACE(et131x_dbginfo, "Setting fundamental net_device info...\n"); SET_NETDEV_DEV(netdev, &pdev->dev); + /* if (pci_using_dac) { - //netdev->features |= NETIF_F_HIGHDMA; + netdev->features |= NETIF_F_HIGHDMA; } + */ /* * NOTE - Turn this on when we're ready to deal with SG-DMA @@ -884,24 +825,20 @@ int __devinit et131x_pci_setup(struct pci_dev *pdev, * receiving a scattered buffer from the network stack, so leave it * off until checksums are calculated in HW. */ - //netdev->features |= NETIF_F_SG; - //netdev->features |= NETIF_F_NO_CSUM; - //netdev->features |= NETIF_F_LLTX; + /* netdev->features |= NETIF_F_SG; */ + /* netdev->features |= NETIF_F_NO_CSUM; */ + /* netdev->features |= NETIF_F_LLTX; */ /* Allocate private adapter struct and copy in relevant information */ adapter = netdev_priv(netdev); - adapter->pdev = pdev; + adapter->pdev = pci_dev_get(pdev); adapter->netdev = netdev; - adapter->VendorID = pdev->vendor; - adapter->DeviceID = pdev->device; /* Do the same for the netdev struct */ netdev->irq = pdev->irq; netdev->base_addr = pdev->resource[0].start; /* Initialize spinlocks here */ - DBG_TRACE(et131x_dbginfo, "Initialize spinlocks...\n"); - spin_lock_init(&adapter->Lock); spin_lock_init(&adapter->TCBSendQLock); spin_lock_init(&adapter->TCBReadyQLock); @@ -921,17 +858,15 @@ int __devinit et131x_pci_setup(struct pci_dev *pdev, * lump it's init with the device specific init below into a * single init function? */ - //while (et131x_find_adapter(adapter, pdev) != 0); + /* while (et131x_find_adapter(adapter, pdev) != 0); */ et131x_find_adapter(adapter, pdev); /* Map the bus-relative registers to system virtual memory */ - DBG_TRACE(et131x_dbginfo, - "Mapping bus-relative registers to virtual memory...\n"); - adapter->CSRAddress = ioremap_nocache(pci_resource_start(pdev, 0), + adapter->regs = ioremap_nocache(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); - if (adapter->CSRAddress == NULL) { - DBG_ERROR(et131x_dbginfo, "Cannot map device registers\n"); + if (adapter->regs == NULL) { + dev_err(&pdev->dev, "Cannot map device registers\n"); result = -ENOMEM; goto err_free_dev; } @@ -939,38 +874,24 @@ int __devinit et131x_pci_setup(struct pci_dev *pdev, /* Perform device-specific initialization here (See code below) */ /* If Phy COMA mode was enabled when we went down, disable it here. */ - { - PM_CSR_t GlobalPmCSR = { 0 }; - - GlobalPmCSR.bits.pm_sysclk_gate = 1; - GlobalPmCSR.bits.pm_txclk_gate = 1; - GlobalPmCSR.bits.pm_rxclk_gate = 1; - writel(GlobalPmCSR.value, - &adapter->CSRAddress->global.pm_csr.value); - } + writel(ET_PMCSR_INIT, &adapter->regs->global.pm_csr); /* Issue a global reset to the et1310 */ - DBG_TRACE(et131x_dbginfo, "Issuing soft reset...\n"); et131x_soft_reset(adapter); /* Disable all interrupts (paranoid) */ - DBG_TRACE(et131x_dbginfo, "Disable device interrupts...\n"); et131x_disable_interrupts(adapter); /* Allocate DMA memory */ result = et131x_adapter_memory_alloc(adapter); if (result != 0) { - DBG_ERROR(et131x_dbginfo, - "Could not alloc adapater memory (DMA)\n"); + dev_err(&pdev->dev, "Could not alloc adapater memory (DMA)\n"); goto err_iounmap; } /* Init send data structures */ - DBG_TRACE(et131x_dbginfo, "Init send data structures...\n"); et131x_init_send(adapter); - adapter->PoMgmt.PowerState = NdisDeviceStateD0; - /* Register the interrupt * * NOTE - This is being done in the open routine, where most other @@ -983,13 +904,11 @@ int __devinit et131x_pci_setup(struct pci_dev *pdev, INIT_WORK(&adapter->task, et131x_isr_handler); /* Determine MAC Address, and copy into the net_device struct */ - DBG_TRACE(et131x_dbginfo, "Retrieve MAC address...\n"); et131x_setup_hardware_properties(adapter); memcpy(netdev->dev_addr, adapter->CurrentAddress, ETH_ALEN); /* Setup et1310 as per the documentation */ - DBG_TRACE(et131x_dbginfo, "Setup the adapter...\n"); et131x_adapter_setup(adapter); /* Create a timer to count errors received by the NIC */ @@ -1002,7 +921,8 @@ int __devinit et131x_pci_setup(struct pci_dev *pdev, /* Initialize link state */ et131x_link_detection_handler((unsigned long)adapter); - /* Intialize variable for counting how long we do not have link status */ + /* Intialize variable for counting how long we do not have + link status */ adapter->PoMgmt.TransPhyComaModeOnBoot = 0; /* We can enable interrupts now @@ -1013,9 +933,9 @@ int __devinit et131x_pci_setup(struct pci_dev *pdev, */ /* Register the net_device struct with the Linux network layer */ - DBG_TRACE(et131x_dbginfo, "Registering net_device...\n"); - if ((result = register_netdev(netdev)) != 0) { - DBG_ERROR(et131x_dbginfo, "register_netdev() failed\n"); + result = register_netdev(netdev); + if (result != 0) { + dev_err(&pdev->dev, "register_netdev() failed\n"); goto err_mem_free; } @@ -1028,14 +948,14 @@ int __devinit et131x_pci_setup(struct pci_dev *pdev, pci_save_state(adapter->pdev); out: - DBG_LEAVE(et131x_dbginfo); return result; err_mem_free: et131x_adapter_memory_free(adapter); err_iounmap: - iounmap(adapter->CSRAddress); + iounmap(adapter->regs); err_free_dev: + pci_dev_put(pdev); free_netdev(netdev); err_release_res: pci_release_regions(pdev); @@ -1043,3 +963,55 @@ err_disable: pci_disable_device(pdev); goto out; } + +static struct pci_device_id et131x_pci_table[] __devinitdata = { + {ET131X_PCI_VENDOR_ID, ET131X_PCI_DEVICE_ID_GIG, PCI_ANY_ID, + PCI_ANY_ID, 0, 0, 0UL}, + {ET131X_PCI_VENDOR_ID, ET131X_PCI_DEVICE_ID_FAST, PCI_ANY_ID, + PCI_ANY_ID, 0, 0, 0UL}, + {0,} +}; + +MODULE_DEVICE_TABLE(pci, et131x_pci_table); + +static struct pci_driver et131x_driver = { + .name = DRIVER_NAME, + .id_table = et131x_pci_table, + .probe = et131x_pci_setup, + .remove = __devexit_p(et131x_pci_remove), + .suspend = NULL, /* et131x_pci_suspend */ + .resume = NULL, /* et131x_pci_resume */ +}; + + +/** + * et131x_init_module - The "main" entry point called on driver initialization + * + * Returns 0 on success, errno on failure (as defined in errno.h) + */ +static int et131x_init_module(void) +{ + if (et131x_speed_set < PARM_SPEED_DUPLEX_MIN || + et131x_speed_set > PARM_SPEED_DUPLEX_MAX) { + printk(KERN_WARNING "et131x: invalid speed setting ignored.\n"); + et131x_speed_set = 0; + } + return pci_register_driver(&et131x_driver); +} + +/** + * et131x_cleanup_module - The entry point called on driver cleanup + */ +static void et131x_cleanup_module(void) +{ + pci_unregister_driver(&et131x_driver); +} + +module_init(et131x_init_module); +module_exit(et131x_cleanup_module); + + +/* Modinfo parameters (filled out using defines from et131x_version.h) */ +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_INFO); +MODULE_LICENSE(DRIVER_LICENSE); diff --git a/drivers/staging/et131x/et131x_initpci.h b/drivers/staging/et131x/et131x_initpci.h index bbacb62..8131d6a 100644 --- a/drivers/staging/et131x/et131x_initpci.h +++ b/drivers/staging/et131x/et131x_initpci.h @@ -2,7 +2,7 @@ * Agere Systems Inc. * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * http://www.agere.com * @@ -20,7 +20,7 @@ * software indicates your acceptance of these terms and conditions. If you do * not agree with these terms and conditions, do not use the software. * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * * Redistribution and use in source or binary forms, with or without @@ -41,7 +41,7 @@ * * Disclaimer * - * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN diff --git a/drivers/staging/et131x/et131x_isr.c b/drivers/staging/et131x/et131x_isr.c index 00afad1..f80189d 100644 --- a/drivers/staging/et131x/et131x_isr.c +++ b/drivers/staging/et131x/et131x_isr.c @@ -2,7 +2,7 @@ * Agere Systems Inc. * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * http://www.agere.com * @@ -20,7 +20,7 @@ * software indicates your acceptance of these terms and conditions. If you do * not agree with these terms and conditions, do not use the software. * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * * Redistribution and use in source or binary forms, with or without @@ -41,7 +41,7 @@ * * Disclaimer * - * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN @@ -57,7 +57,6 @@ */ #include "et131x_version.h" -#include "et131x_debug.h" #include "et131x_defs.h" #include <linux/init.h> @@ -74,9 +73,10 @@ #include <linux/interrupt.h> #include <linux/in.h> #include <linux/delay.h> -#include <asm/io.h> +#include <linux/io.h> +#include <linux/bitops.h> +#include <linux/pci.h> #include <asm/system.h> -#include <asm/bitops.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> @@ -91,10 +91,45 @@ #include "et131x_adapter.h" -/* Data for debugging facilities */ -#ifdef CONFIG_ET131X_DEBUG -extern dbg_info_t *et131x_dbginfo; -#endif /* CONFIG_ET131X_DEBUG */ +/** + * et131x_enable_interrupts - enable interrupt + * @adapter: et131x device + * + * Enable the appropriate interrupts on the ET131x according to our + * configuration + */ + +void et131x_enable_interrupts(struct et131x_adapter *adapter) +{ + u32 mask; + + /* Enable all global interrupts */ + if (adapter->FlowControl == TxOnly || adapter->FlowControl == Both) + mask = INT_MASK_ENABLE; + else + mask = INT_MASK_ENABLE_NO_FLOW; + + if (adapter->DriverNoPhyAccess) + mask |= ET_INTR_PHY; + + adapter->CachedMaskValue = mask; + writel(mask, &adapter->regs->global.int_mask); +} + +/** + * et131x_disable_interrupts - interrupt disable + * @adapter: et131x device + * + * Block all interrupts from the et131x device at the device itself + */ + +void et131x_disable_interrupts(struct et131x_adapter *adapter) +{ + /* Disable all global interrupts */ + adapter->CachedMaskValue = INT_MASK_DISABLE; + writel(INT_MASK_DISABLE, &adapter->regs->global.int_mask); +} + /** * et131x_isr - The Interrupt Service Routine for the driver. @@ -103,16 +138,15 @@ extern dbg_info_t *et131x_dbginfo; * * Returns a value indicating if the interrupt was handled. */ + irqreturn_t et131x_isr(int irq, void *dev_id) { bool handled = true; struct net_device *netdev = (struct net_device *)dev_id; struct et131x_adapter *adapter = NULL; - INTERRUPT_t status; + u32 status; - if (netdev == NULL || !netif_device_present(netdev)) { - DBG_WARNING(et131x_dbginfo, - "No net_device struct or device not present\n"); + if (!netif_device_present(netdev)) { handled = false; goto out; } @@ -129,59 +163,40 @@ irqreturn_t et131x_isr(int irq, void *dev_id) /* Get a copy of the value in the interrupt status register * so we can process the interrupting section */ - status.value = readl(&adapter->CSRAddress->global.int_status.value); + status = readl(&adapter->regs->global.int_status); if (adapter->FlowControl == TxOnly || adapter->FlowControl == Both) { - status.value &= ~INT_MASK_ENABLE; + status &= ~INT_MASK_ENABLE; } else { - status.value &= ~INT_MASK_ENABLE_NO_FLOW; + status &= ~INT_MASK_ENABLE_NO_FLOW; } /* Make sure this is our interrupt */ - if (!status.value) { -#ifdef CONFIG_ET131X_DEBUG - adapter->Stats.UnhandledInterruptsPerSec++; -#endif + if (!status) { handled = false; - DBG_VERBOSE(et131x_dbginfo, "NOT OUR INTERRUPT\n"); et131x_enable_interrupts(adapter); goto out; } /* This is our interrupt, so process accordingly */ -#ifdef CONFIG_ET131X_DEBUG - if (status.bits.rxdma_xfr_done) { - adapter->Stats.RxDmaInterruptsPerSec++; - } - if (status.bits.txdma_isr) { - adapter->Stats.TxDmaInterruptsPerSec++; - } -#endif - - if (status.bits.watchdog_interrupt) { + if (status & ET_INTR_WATCHDOG) { PMP_TCB pMpTcb = adapter->TxRing.CurrSendHead; - if (pMpTcb) { - if (++pMpTcb->PacketStaleCount > 1) { - status.bits.txdma_isr = 1; - } - } + if (pMpTcb) + if (++pMpTcb->PacketStaleCount > 1) + status |= ET_INTR_TXDMA_ISR; - if (adapter->RxRing.UnfinishedReceives) { - status.bits.rxdma_xfr_done = 1; - } else if (pMpTcb == NULL) { - writel(0, &adapter->CSRAddress->global.watchdog_timer); - } + if (adapter->RxRing.UnfinishedReceives) + status |= ET_INTR_RXDMA_XFR_DONE; + else if (pMpTcb == NULL) + writel(0, &adapter->regs->global.watchdog_timer); - status.bits.watchdog_interrupt = 0; -#ifdef CONFIG_ET131X_DEBUG - adapter->Stats.WatchDogInterruptsPerSec++; -#endif + status &= ~ET_INTR_WATCHDOG; } - if (status.value == 0) { + if (status == 0) { /* This interrupt has in some way been "handled" by * the ISR. Either it was a spurious Rx interrupt, or * it was a Tx interrupt that has been filtered by @@ -202,7 +217,6 @@ irqreturn_t et131x_isr(int irq, void *dev_id) * execution */ schedule_work(&adapter->task); - out: return IRQ_RETVAL(handled); } @@ -216,10 +230,10 @@ out: */ void et131x_isr_handler(struct work_struct *work) { - struct et131x_adapter *pAdapter = + struct et131x_adapter *etdev = container_of(work, struct et131x_adapter, task); - INTERRUPT_t GlobStatus = pAdapter->Stats.InterruptStatus; - ADDRESS_MAP_t __iomem *iomem = pAdapter->CSRAddress; + u32 status = etdev->Stats.InterruptStatus; + ADDRESS_MAP_t __iomem *iomem = etdev->regs; /* * These first two are by far the most common. Once handled, we clear @@ -227,35 +241,32 @@ void et131x_isr_handler(struct work_struct *work) * exit. */ /* Handle all the completed Transmit interrupts */ - if (GlobStatus.bits.txdma_isr) { - DBG_TX(et131x_dbginfo, "TXDMA_ISR interrupt\n"); - et131x_handle_send_interrupt(pAdapter); + if (status & ET_INTR_TXDMA_ISR) { + et131x_handle_send_interrupt(etdev); } /* Handle all the completed Receives interrupts */ - if (GlobStatus.bits.rxdma_xfr_done) { - DBG_RX(et131x_dbginfo, "RXDMA_XFR_DONE interrupt\n"); - et131x_handle_recv_interrupt(pAdapter); + if (status & ET_INTR_RXDMA_XFR_DONE) { + et131x_handle_recv_interrupt(etdev); } - GlobStatus.value &= 0xffffffd7; + status &= 0xffffffd7; - if (GlobStatus.value) { + if (status) { /* Handle the TXDMA Error interrupt */ - if (GlobStatus.bits.txdma_err) { - TXDMA_ERROR_t TxDmaErr; + if (status & ET_INTR_TXDMA_ERR) { + u32 txdma_err; /* Following read also clears the register (COR) */ - TxDmaErr.value = readl(&iomem->txdma.TxDmaError.value); + txdma_err = readl(&iomem->txdma.TxDmaError); - DBG_WARNING(et131x_dbginfo, + dev_warn(&etdev->pdev->dev, "TXDMA_ERR interrupt, error = %d\n", - TxDmaErr.value); + txdma_err); } /* Handle Free Buffer Ring 0 and 1 Low interrupt */ - if (GlobStatus.bits.rxdma_fb_ring0_low || - GlobStatus.bits.rxdma_fb_ring1_low) { + if (status & (ET_INTR_RXDMA_FB_R0_LOW | ET_INTR_RXDMA_FB_R1_LOW)) { /* * This indicates the number of unused buffers in * RXDMA free buffer ring 0 is <= the limit you @@ -270,22 +281,19 @@ void et131x_isr_handler(struct work_struct *work) * ET1310 for re-use. This interrupt is one method of * returning resources. */ - DBG_WARNING(et131x_dbginfo, - "RXDMA_FB_RING0_LOW or " - "RXDMA_FB_RING1_LOW interrupt\n"); /* If the user has flow control on, then we will * send a pause packet, otherwise just exit */ - if (pAdapter->FlowControl == TxOnly || - pAdapter->FlowControl == Both) { - PM_CSR_t pm_csr; + if (etdev->FlowControl == TxOnly || + etdev->FlowControl == Both) { + u32 pm_csr; /* Tell the device to send a pause packet via * the back pressure register */ - pm_csr.value = readl(&iomem->global.pm_csr.value); - if (pm_csr.bits.pm_phy_sw_coma == 0) { + pm_csr = readl(&iomem->global.pm_csr); + if ((pm_csr & ET_PM_PHY_SW_COMA) == 0) { TXMAC_BP_CTRL_t bp_ctrl = { 0 }; bp_ctrl.bits.bp_req = 1; @@ -297,9 +305,7 @@ void et131x_isr_handler(struct work_struct *work) } /* Handle Packet Status Ring Low Interrupt */ - if (GlobStatus.bits.rxdma_pkt_stat_ring_low) { - DBG_WARNING(et131x_dbginfo, - "RXDMA_PKT_STAT_RING_LOW interrupt\n"); + if (status & ET_INTR_RXDMA_STAT_LOW) { /* * Same idea as with the two Free Buffer Rings. @@ -313,7 +319,7 @@ void et131x_isr_handler(struct work_struct *work) } /* Handle RXDMA Error Interrupt */ - if (GlobStatus.bits.rxdma_err) { + if (status & ET_INTR_RXDMA_ERR) { /* * The rxdma_error interrupt is sent when a time-out * on a request issued by the JAGCore has occurred or @@ -332,17 +338,17 @@ void et131x_isr_handler(struct work_struct *work) * something bad has occurred. A reset might be the * thing to do. */ - // TRAP(); + /* TRAP();*/ - pAdapter->TxMacTest.value = + etdev->TxMacTest.value = readl(&iomem->txmac.tx_test.value); - DBG_WARNING(et131x_dbginfo, + dev_warn(&etdev->pdev->dev, "RxDMA_ERR interrupt, error %x\n", - pAdapter->TxMacTest.value); + etdev->TxMacTest.value); } /* Handle the Wake on LAN Event */ - if (GlobStatus.bits.wake_on_lan) { + if (status & ET_INTR_WOL) { /* * This is a secondary interrupt for wake on LAN. * The driver should never see this, if it does, @@ -350,61 +356,51 @@ void et131x_isr_handler(struct work_struct *work) * message when we are in DBG mode, otherwise we * will ignore it. */ - DBG_ERROR(et131x_dbginfo, "WAKE_ON_LAN interrupt\n"); + dev_err(&etdev->pdev->dev, "WAKE_ON_LAN interrupt\n"); } /* Handle the PHY interrupt */ - if (GlobStatus.bits.phy_interrupt) { - PM_CSR_t pm_csr; + if (status & ET_INTR_PHY) { + u32 pm_csr; MI_BMSR_t BmsrInts, BmsrData; MI_ISR_t myIsr; - DBG_VERBOSE(et131x_dbginfo, "PHY interrupt\n"); - /* If we are in coma mode when we get this interrupt, * we need to disable it. */ - pm_csr.value = readl(&iomem->global.pm_csr.value); - if (pm_csr.bits.pm_phy_sw_coma == 1) { + pm_csr = readl(&iomem->global.pm_csr); + if (pm_csr & ET_PM_PHY_SW_COMA) { /* * Check to see if we are in coma mode and if * so, disable it because we will not be able * to read PHY values until we are out. */ - DBG_VERBOSE(et131x_dbginfo, - "Device is in COMA mode, " - "need to wake up\n"); - DisablePhyComa(pAdapter); + DisablePhyComa(etdev); } /* Read the PHY ISR to clear the reason for the * interrupt. */ - MiRead(pAdapter, (uint8_t) offsetof(MI_REGS_t, isr), + MiRead(etdev, (uint8_t) offsetof(MI_REGS_t, isr), &myIsr.value); - if (!pAdapter->ReplicaPhyLoopbk) { - MiRead(pAdapter, + if (!etdev->ReplicaPhyLoopbk) { + MiRead(etdev, (uint8_t) offsetof(MI_REGS_t, bmsr), &BmsrData.value); BmsrInts.value = - pAdapter->Bmsr.value ^ BmsrData.value; - pAdapter->Bmsr.value = BmsrData.value; - - DBG_VERBOSE(et131x_dbginfo, - "Bmsr.value = 0x%04x," - "Bmsr_ints.value = 0x%04x\n", - BmsrData.value, BmsrInts.value); + etdev->Bmsr.value ^ BmsrData.value; + etdev->Bmsr.value = BmsrData.value; /* Do all the cable in / cable out stuff */ - et131x_Mii_check(pAdapter, BmsrData, BmsrInts); + et131x_Mii_check(etdev, BmsrData, BmsrInts); } } /* Let's move on to the TxMac */ - if (GlobStatus.bits.txmac_interrupt) { - pAdapter->TxRing.TxMacErr.value = + if (status & ET_INTR_TXMAC) { + etdev->TxRing.TxMacErr.value = readl(&iomem->txmac.err.value); /* @@ -417,32 +413,32 @@ void et131x_isr_handler(struct work_struct *work) * a nutshell, the whole Tx path will have to be reset * and re-configured afterwards. */ - DBG_WARNING(et131x_dbginfo, + dev_warn(&etdev->pdev->dev, "TXMAC interrupt, error 0x%08x\n", - pAdapter->TxRing.TxMacErr.value); + etdev->TxRing.TxMacErr.value); /* If we are debugging, we want to see this error, * otherwise we just want the device to be reset and * continue */ - //DBG_TRAP(); } /* Handle RXMAC Interrupt */ - if (GlobStatus.bits.rxmac_interrupt) { + if (status & ET_INTR_RXMAC) { /* * These interrupts are catastrophic to the device, * what we need to do is disable the interrupts and * set the flag to cause us to reset so we can solve * this issue. */ - // MP_SET_FLAG( pAdapter, fMP_ADAPTER_HARDWARE_ERROR ); + /* MP_SET_FLAG( etdev, + fMP_ADAPTER_HARDWARE_ERROR); */ - DBG_WARNING(et131x_dbginfo, - "RXMAC interrupt, error 0x%08x. Requesting reset\n", + dev_warn(&etdev->pdev->dev, + "RXMAC interrupt, error 0x%08x. Requesting reset\n", readl(&iomem->rxmac.err_reg.value)); - DBG_WARNING(et131x_dbginfo, + dev_warn(&etdev->pdev->dev, "Enable 0x%08x, Diag 0x%08x\n", readl(&iomem->rxmac.ctrl.value), readl(&iomem->rxmac.rxq_diag.value)); @@ -452,23 +448,21 @@ void et131x_isr_handler(struct work_struct *work) * otherwise we just want the device to be reset and * continue */ - // TRAP(); } /* Handle MAC_STAT Interrupt */ - if (GlobStatus.bits.mac_stat_interrupt) { + if (status & ET_INTR_MAC_STAT) { /* * This means at least one of the un-masked counters * in the MAC_STAT block has rolled over. Use this * to maintain the top, software managed bits of the * counter(s). */ - DBG_VERBOSE(et131x_dbginfo, "MAC_STAT interrupt\n"); - HandleMacStatInterrupt(pAdapter); + HandleMacStatInterrupt(etdev); } /* Handle SLV Timeout Interrupt */ - if (GlobStatus.bits.slv_timeout) { + if (status & ET_INTR_SLV_TIMEOUT) { /* * This means a timeout has occured on a read or * write request to one of the JAGCore registers. The @@ -478,11 +472,7 @@ void et131x_isr_handler(struct work_struct *work) * addressed module is in a power-down state and * can't respond. */ - DBG_VERBOSE(et131x_dbginfo, "SLV_TIMEOUT interrupt\n"); } } - - if (pAdapter->PoMgmt.PowerState == NdisDeviceStateD0) { - et131x_enable_interrupts(pAdapter); - } + et131x_enable_interrupts(etdev); } diff --git a/drivers/staging/et131x/et131x_isr.h b/drivers/staging/et131x/et131x_isr.h index 76a51d5..906d577 100644 --- a/drivers/staging/et131x/et131x_isr.h +++ b/drivers/staging/et131x/et131x_isr.h @@ -2,7 +2,7 @@ * Agere Systems Inc. * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * http://www.agere.com * @@ -20,7 +20,7 @@ * software indicates your acceptance of these terms and conditions. If you do * not agree with these terms and conditions, do not use the software. * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * * Redistribution and use in source or binary forms, with or without @@ -41,7 +41,7 @@ * * Disclaimer * - * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN diff --git a/drivers/staging/et131x/et131x_netdev.c b/drivers/staging/et131x/et131x_netdev.c index 59e99cc..8c7612f 100644 --- a/drivers/staging/et131x/et131x_netdev.c +++ b/drivers/staging/et131x/et131x_netdev.c @@ -2,7 +2,7 @@ * Agere Systems Inc. * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * http://www.agere.com * @@ -19,7 +19,7 @@ * software indicates your acceptance of these terms and conditions. If you do * not agree with these terms and conditions, do not use the software. * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * * Redistribution and use in source or binary forms, with or without @@ -40,7 +40,7 @@ * * Disclaimer * - * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN @@ -56,7 +56,6 @@ */ #include "et131x_version.h" -#include "et131x_debug.h" #include "et131x_defs.h" #include <linux/init.h> @@ -73,9 +72,10 @@ #include <linux/interrupt.h> #include <linux/in.h> #include <linux/delay.h> -#include <asm/io.h> +#include <linux/io.h> +#include <linux/bitops.h> +#include <linux/pci.h> #include <asm/system.h> -#include <asm/bitops.h> #include <linux/mii.h> #include <linux/netdevice.h> @@ -94,11 +94,6 @@ #include "et131x_isr.h" #include "et131x_initpci.h" -/* Data for debugging facilities */ -#ifdef CONFIG_ET131X_DEBUG -extern dbg_info_t *et131x_dbginfo; -#endif /* CONFIG_ET131X_DEBUG */ - struct net_device_stats *et131x_stats(struct net_device *netdev); int et131x_open(struct net_device *netdev); int et131x_close(struct net_device *netdev); @@ -138,33 +133,27 @@ struct net_device *et131x_device_alloc(void) { struct net_device *netdev; - DBG_ENTER(et131x_dbginfo); - /* Alloc net_device and adapter structs */ netdev = alloc_etherdev(sizeof(struct et131x_adapter)); if (netdev == NULL) { - DBG_ERROR(et131x_dbginfo, - "Alloc of net_device struct failed\n"); - DBG_LEAVE(et131x_dbginfo); + printk(KERN_ERR "et131x: Alloc of net_device struct failed\n"); return NULL; } /* Setup the function registration table (and other data) for a * net_device */ - //netdev->init = &et131x_init; - //netdev->set_config = &et131x_config; + /* netdev->init = &et131x_init; */ + /* netdev->set_config = &et131x_config; */ netdev->watchdog_timeo = ET131X_TX_TIMEOUT; netdev->netdev_ops = &et131x_netdev_ops; - //netdev->ethtool_ops = &et131x_ethtool_ops; - - // Poll? - //netdev->poll = &et131x_poll; - //netdev->poll_controller = &et131x_poll_controller; + /* netdev->ethtool_ops = &et131x_ethtool_ops; */ - DBG_LEAVE(et131x_dbginfo); + /* Poll? */ + /* netdev->poll = &et131x_poll; */ + /* netdev->poll_controller = &et131x_poll_controller; */ return netdev; } @@ -180,8 +169,6 @@ struct net_device_stats *et131x_stats(struct net_device *netdev) struct net_device_stats *stats = &adapter->net_stats; CE_STATS_t *devstat = &adapter->Stats; - DBG_ENTER(et131x_dbginfo); - stats->rx_packets = devstat->ipackets; stats->tx_packets = devstat->opackets; stats->rx_errors = devstat->length_err + devstat->alignment_err + @@ -194,25 +181,25 @@ struct net_device_stats *et131x_stats(struct net_device *netdev) stats->rx_over_errors = devstat->rx_ov_flow; stats->rx_crc_errors = devstat->crc_err; - // NOTE: These stats don't have corresponding values in CE_STATS, so we're - // going to have to update these directly from within the TX/RX code - //stats->rx_bytes = 20; //devstat->; - //stats->tx_bytes = 20; //devstat->; - //stats->rx_dropped = devstat->; - //stats->tx_dropped = devstat->; - - // NOTE: Not used, can't find analogous statistics - //stats->rx_frame_errors = devstat->; - //stats->rx_fifo_errors = devstat->; - //stats->rx_missed_errors = devstat->; - - //stats->tx_aborted_errors = devstat->; - //stats->tx_carrier_errors = devstat->; - //stats->tx_fifo_errors = devstat->; - //stats->tx_heartbeat_errors = devstat->; - //stats->tx_window_errors = devstat->; - - DBG_LEAVE(et131x_dbginfo); + /* NOTE: These stats don't have corresponding values in CE_STATS, + * so we're going to have to update these directly from within the + * TX/RX code + */ + /* stats->rx_bytes = 20; devstat->; */ + /* stats->tx_bytes = 20; devstat->; */ + /* stats->rx_dropped = devstat->; */ + /* stats->tx_dropped = devstat->; */ + + /* NOTE: Not used, can't find analogous statistics */ + /* stats->rx_frame_errors = devstat->; */ + /* stats->rx_fifo_errors = devstat->; */ + /* stats->rx_missed_errors = devstat->; */ + + /* stats->tx_aborted_errors = devstat->; */ + /* stats->tx_carrier_errors = devstat->; */ + /* stats->tx_fifo_errors = devstat->; */ + /* stats->tx_heartbeat_errors = devstat->; */ + /* stats->tx_window_errors = devstat->; */ return stats; } @@ -227,20 +214,15 @@ int et131x_open(struct net_device *netdev) int result = 0; struct et131x_adapter *adapter = netdev_priv(netdev); - DBG_ENTER(et131x_dbginfo); - /* Start the timer to track NIC errors */ add_timer(&adapter->ErrorTimer); - /* Register our ISR */ - DBG_TRACE(et131x_dbginfo, "Registering ISR...\n"); - - result = - request_irq(netdev->irq, et131x_isr, IRQF_SHARED, netdev->name, - netdev); + /* Register our IRQ */ + result = request_irq(netdev->irq, et131x_isr, IRQF_SHARED, + netdev->name, netdev); if (result) { - DBG_ERROR(et131x_dbginfo, "Could not register ISR\n"); - DBG_LEAVE(et131x_dbginfo); + dev_err(&adapter->pdev->dev, "c ould not register IRQ %d\n", + netdev->irq); return result; } @@ -251,12 +233,10 @@ int et131x_open(struct net_device *netdev) /* Enable device interrupts */ et131x_enable_interrupts(adapter); - MP_SET_FLAG(adapter, fMP_ADAPTER_INTERRUPT_IN_USE); + adapter->Flags |= fMP_ADAPTER_INTERRUPT_IN_USE; /* We're ready to move some data, so start the queue */ netif_start_queue(netdev); - - DBG_LEAVE(et131x_dbginfo); return result; } @@ -270,8 +250,6 @@ int et131x_close(struct net_device *netdev) { struct et131x_adapter *adapter = netdev_priv(netdev); - DBG_ENTER(et131x_dbginfo); - /* First thing is to stop the queue */ netif_stop_queue(netdev); @@ -283,15 +261,11 @@ int et131x_close(struct net_device *netdev) et131x_disable_interrupts(adapter); /* Deregistering ISR */ - MP_CLEAR_FLAG(adapter, fMP_ADAPTER_INTERRUPT_IN_USE); - - DBG_TRACE(et131x_dbginfo, "Deregistering ISR...\n"); + adapter->Flags &= ~fMP_ADAPTER_INTERRUPT_IN_USE; free_irq(netdev->irq, netdev); /* Stop the error timer */ del_timer_sync(&adapter->ErrorTimer); - - DBG_LEAVE(et131x_dbginfo); return 0; } @@ -306,42 +280,33 @@ int et131x_close(struct net_device *netdev) int et131x_ioctl_mii(struct net_device *netdev, struct ifreq *reqbuf, int cmd) { int status = 0; - struct et131x_adapter *pAdapter = netdev_priv(netdev); + struct et131x_adapter *etdev = netdev_priv(netdev); struct mii_ioctl_data *data = if_mii(reqbuf); - DBG_ENTER(et131x_dbginfo); - switch (cmd) { case SIOCGMIIPHY: - DBG_VERBOSE(et131x_dbginfo, "SIOCGMIIPHY\n"); - data->phy_id = pAdapter->Stats.xcvr_addr; + data->phy_id = etdev->Stats.xcvr_addr; break; case SIOCGMIIREG: - DBG_VERBOSE(et131x_dbginfo, "SIOCGMIIREG\n"); - if (!capable(CAP_NET_ADMIN)) { + if (!capable(CAP_NET_ADMIN)) status = -EPERM; - } else { - status = MiRead(pAdapter, + else + status = MiRead(etdev, data->reg_num, &data->val_out); - } break; case SIOCSMIIREG: - DBG_VERBOSE(et131x_dbginfo, "SIOCSMIIREG\n"); - if (!capable(CAP_NET_ADMIN)) { + if (!capable(CAP_NET_ADMIN)) status = -EPERM; - } else { - status = MiWrite(pAdapter, data->reg_num, + else + status = MiWrite(etdev, data->reg_num, data->val_in); - } break; default: status = -EOPNOTSUPP; } - - DBG_LEAVE(et131x_dbginfo); return status; } @@ -357,8 +322,6 @@ int et131x_ioctl(struct net_device *netdev, struct ifreq *reqbuf, int cmd) { int status = 0; - DBG_ENTER(et131x_dbginfo); - switch (cmd) { case SIOCGMIIPHY: case SIOCGMIIREG: @@ -367,12 +330,8 @@ int et131x_ioctl(struct net_device *netdev, struct ifreq *reqbuf, int cmd) break; default: - DBG_WARNING(et131x_dbginfo, "Unhandled IOCTL Code: 0x%04x\n", - cmd); status = -EOPNOTSUPP; } - - DBG_LEAVE(et131x_dbginfo); return status; } @@ -389,10 +348,8 @@ int et131x_set_packet_filter(struct et131x_adapter *adapter) RXMAC_CTRL_t ctrl; RXMAC_PF_CTRL_t pf_ctrl; - DBG_ENTER(et131x_dbginfo); - - ctrl.value = readl(&adapter->CSRAddress->rxmac.ctrl.value); - pf_ctrl.value = readl(&adapter->CSRAddress->rxmac.pf_ctrl.value); + ctrl.value = readl(&adapter->regs->rxmac.ctrl.value); + pf_ctrl.value = readl(&adapter->regs->rxmac.pf_ctrl.value); /* Default to disabled packet filtering. Enable it in the individual * case statements that require the device to filter something @@ -413,11 +370,8 @@ int et131x_set_packet_filter(struct et131x_adapter *adapter) * multicast entries or (3) we receive none. */ if (filter & ET131X_PACKET_TYPE_ALL_MULTICAST) { - DBG_VERBOSE(et131x_dbginfo, - "Multicast filtering OFF (Rx ALL MULTICAST)\n"); pf_ctrl.bits.filter_multi_en = 0; } else { - DBG_VERBOSE(et131x_dbginfo, "Multicast filtering ON\n"); SetupDeviceForMulticast(adapter); pf_ctrl.bits.filter_multi_en = 1; ctrl.bits.pkt_filter_disable = 0; @@ -425,7 +379,6 @@ int et131x_set_packet_filter(struct et131x_adapter *adapter) /* Set us up with Unicast packet filtering */ if (filter & ET131X_PACKET_TYPE_DIRECTED) { - DBG_VERBOSE(et131x_dbginfo, "Unicast Filtering ON\n"); SetupDeviceForUnicast(adapter); pf_ctrl.bits.filter_uni_en = 1; ctrl.bits.pkt_filter_disable = 0; @@ -433,12 +386,9 @@ int et131x_set_packet_filter(struct et131x_adapter *adapter) /* Set us up with Broadcast packet filtering */ if (filter & ET131X_PACKET_TYPE_BROADCAST) { - DBG_VERBOSE(et131x_dbginfo, "Broadcast Filtering ON\n"); pf_ctrl.bits.filter_broad_en = 1; ctrl.bits.pkt_filter_disable = 0; } else { - DBG_VERBOSE(et131x_dbginfo, - "Broadcast Filtering OFF\n"); pf_ctrl.bits.filter_broad_en = 0; } @@ -447,11 +397,9 @@ int et131x_set_packet_filter(struct et131x_adapter *adapter) * in the control reg. */ writel(pf_ctrl.value, - &adapter->CSRAddress->rxmac.pf_ctrl.value); - writel(ctrl.value, &adapter->CSRAddress->rxmac.ctrl.value); + &adapter->regs->rxmac.pf_ctrl.value); + writel(ctrl.value, &adapter->regs->rxmac.ctrl.value); } - - DBG_LEAVE(et131x_dbginfo); return status; } @@ -464,12 +412,10 @@ void et131x_multicast(struct net_device *netdev) struct et131x_adapter *adapter = netdev_priv(netdev); uint32_t PacketFilter = 0; uint32_t count; - unsigned long lockflags; + unsigned long flags; struct dev_mc_list *mclist = netdev->mc_list; - DBG_ENTER(et131x_dbginfo); - - spin_lock_irqsave(&adapter->Lock, lockflags); + spin_lock_irqsave(&adapter->Lock, flags); /* Before we modify the platform-independent filter flags, store them * locally. This allows us to determine if anything's changed and if @@ -487,37 +433,25 @@ void et131x_multicast(struct net_device *netdev) /* Check the net_device flags and set the device independent flags * accordingly */ - DBG_VERBOSE(et131x_dbginfo, - "MULTICAST ADDR COUNT: %d\n", netdev->mc_count); if (netdev->flags & IFF_PROMISC) { - DBG_VERBOSE(et131x_dbginfo, "Request: PROMISCUOUS MODE ON\n"); adapter->PacketFilter |= ET131X_PACKET_TYPE_PROMISCUOUS; } else { - DBG_VERBOSE(et131x_dbginfo, "Request: PROMISCUOUS MODE OFF\n"); adapter->PacketFilter &= ~ET131X_PACKET_TYPE_PROMISCUOUS; } if (netdev->flags & IFF_ALLMULTI) { - DBG_VERBOSE(et131x_dbginfo, "Request: ACCEPT ALL MULTICAST\n"); adapter->PacketFilter |= ET131X_PACKET_TYPE_ALL_MULTICAST; } if (netdev->mc_count > NIC_MAX_MCAST_LIST) { - DBG_WARNING(et131x_dbginfo, - "ACCEPT ALL MULTICAST for now, as there's more Multicast " - "addresses than the HW supports\n"); - adapter->PacketFilter |= ET131X_PACKET_TYPE_ALL_MULTICAST; } if (netdev->mc_count < 1) { - DBG_VERBOSE(et131x_dbginfo, "Request: REJECT ALL MULTICAST\n"); adapter->PacketFilter &= ~ET131X_PACKET_TYPE_ALL_MULTICAST; adapter->PacketFilter &= ~ET131X_PACKET_TYPE_MULTICAST; } else { - DBG_VERBOSE(et131x_dbginfo, - "Request: SET MULTICAST FILTER(S)\n"); adapter->PacketFilter |= ET131X_PACKET_TYPE_MULTICAST; } @@ -525,14 +459,8 @@ void et131x_multicast(struct net_device *netdev) adapter->MCAddressCount = netdev->mc_count; if (netdev->mc_count) { - if (mclist->dmi_addrlen != ETH_ALEN) { - DBG_WARNING(et131x_dbginfo, - "Multicast addrs are not ETH_ALEN in size\n"); - } else { - count = netdev->mc_count - 1; - memcpy(adapter->MCList[count], mclist->dmi_addr, - ETH_ALEN); - } + count = netdev->mc_count - 1; + memcpy(adapter->MCList[count], mclist->dmi_addr, ETH_ALEN); } /* Are the new flags different from the previous ones? If not, then no @@ -543,17 +471,9 @@ void et131x_multicast(struct net_device *netdev) */ if (PacketFilter != adapter->PacketFilter) { /* Call the device's filter function */ - DBG_VERBOSE(et131x_dbginfo, "UPDATE REQUIRED, FLAGS changed\n"); - et131x_set_packet_filter(adapter); - } else { - DBG_VERBOSE(et131x_dbginfo, - "NO UPDATE REQUIRED, FLAGS didn't change\n"); } - - spin_unlock_irqrestore(&adapter->Lock, lockflags); - - DBG_LEAVE(et131x_dbginfo); + spin_unlock_irqrestore(&adapter->Lock, flags); } /** @@ -567,8 +487,6 @@ int et131x_tx(struct sk_buff *skb, struct net_device *netdev) { int status = 0; - DBG_TX_ENTER(et131x_dbginfo); - /* Save the timestamp for the TX timeout watchdog */ netdev->trans_start = jiffies; @@ -578,22 +496,15 @@ int et131x_tx(struct sk_buff *skb, struct net_device *netdev) /* Check status and manage the netif queue if necessary */ if (status != 0) { if (status == -ENOMEM) { - DBG_VERBOSE(et131x_dbginfo, - "OUT OF TCBs; STOP NETIF QUEUE\n"); - /* Put the queue to sleep until resources are * available */ netif_stop_queue(netdev); status = NETDEV_TX_BUSY; } else { - DBG_WARNING(et131x_dbginfo, - "Misc error; drop packet\n"); status = NETDEV_TX_OK; } } - - DBG_TX_LEAVE(et131x_dbginfo); return status; } @@ -607,80 +518,52 @@ int et131x_tx(struct sk_buff *skb, struct net_device *netdev) */ void et131x_tx_timeout(struct net_device *netdev) { - struct et131x_adapter *pAdapter = netdev_priv(netdev); + struct et131x_adapter *etdev = netdev_priv(netdev); PMP_TCB pMpTcb; - unsigned long lockflags; - - DBG_WARNING(et131x_dbginfo, "TX TIMEOUT\n"); + unsigned long flags; /* Just skip this part if the adapter is doing link detection */ - if (MP_TEST_FLAG(pAdapter, fMP_ADAPTER_LINK_DETECTION)) { - DBG_ERROR(et131x_dbginfo, "Still doing link detection\n"); + if (etdev->Flags & fMP_ADAPTER_LINK_DETECTION) return; - } /* Any nonrecoverable hardware error? * Checks adapter->flags for any failure in phy reading */ - if (MP_TEST_FLAG(pAdapter, fMP_ADAPTER_NON_RECOVER_ERROR)) { - DBG_WARNING(et131x_dbginfo, "Non recoverable error - remove\n"); + if (etdev->Flags & fMP_ADAPTER_NON_RECOVER_ERROR) return; - } /* Hardware failure? */ - if (MP_TEST_FLAG(pAdapter, fMP_ADAPTER_HARDWARE_ERROR)) { - DBG_WARNING(et131x_dbginfo, "hardware error - reset\n"); + if (etdev->Flags & fMP_ADAPTER_HARDWARE_ERROR) { + dev_err(&etdev->pdev->dev, "hardware error - reset\n"); return; } /* Is send stuck? */ - spin_lock_irqsave(&pAdapter->TCBSendQLock, lockflags); + spin_lock_irqsave(&etdev->TCBSendQLock, flags); - pMpTcb = pAdapter->TxRing.CurrSendHead; + pMpTcb = etdev->TxRing.CurrSendHead; if (pMpTcb != NULL) { pMpTcb->Count++; if (pMpTcb->Count > NIC_SEND_HANG_THRESHOLD) { -#ifdef CONFIG_ET131X_DEBUG - TX_STATUS_BLOCK_t txDmaComplete = - *(pAdapter->TxRing.pTxStatusVa); - PTX_DESC_ENTRY_t pDesc = - pAdapter->TxRing.pTxDescRingVa + - pMpTcb->WrIndex.bits.val; -#endif TX_DESC_ENTRY_t StuckDescriptors[10]; - if (pMpTcb->WrIndex.bits.val > 7) { + if (INDEX10(pMpTcb->WrIndex) > 7) { memcpy(StuckDescriptors, - pAdapter->TxRing.pTxDescRingVa + - pMpTcb->WrIndex.bits.val - 6, + etdev->TxRing.pTxDescRingVa + + INDEX10(pMpTcb->WrIndex) - 6, sizeof(TX_DESC_ENTRY_t) * 10); } - spin_unlock_irqrestore(&pAdapter->TCBSendQLock, - lockflags); - - DBG_WARNING(et131x_dbginfo, - "Send stuck - reset. pMpTcb->WrIndex %x, Flags 0x%08x\n", - pMpTcb->WrIndex.bits.val, - pMpTcb->Flags); - - DBG_WARNING(et131x_dbginfo, - "pDesc 0x%08x, 0x%08x, 0x%08x, 0x%08x\n", - pDesc->DataBufferPtrHigh, - pDesc->DataBufferPtrLow, pDesc->word2.value, - pDesc->word3.value); - - DBG_WARNING(et131x_dbginfo, - "WbStatus 0x%08x\n", txDmaComplete.value); - -#ifdef CONFIG_ET131X_DEBUG - DumpDeviceBlock(DBG_WARNING_ON, pAdapter, 0); - DumpDeviceBlock(DBG_WARNING_ON, pAdapter, 1); - DumpDeviceBlock(DBG_WARNING_ON, pAdapter, 3); - DumpDeviceBlock(DBG_WARNING_ON, pAdapter, 5); -#endif + spin_unlock_irqrestore(&etdev->TCBSendQLock, + flags); + + dev_warn(&etdev->pdev->dev, + "Send stuck - reset. pMpTcb->WrIndex %x, Flags 0x%08x\n", + pMpTcb->WrIndex, + pMpTcb->Flags); + et131x_close(netdev); et131x_open(netdev); @@ -688,7 +571,7 @@ void et131x_tx_timeout(struct net_device *netdev) } } - spin_unlock_irqrestore(&pAdapter->TCBSendQLock, lockflags); + spin_unlock_irqrestore(&etdev->TCBSendQLock, flags); } /** @@ -703,13 +586,9 @@ int et131x_change_mtu(struct net_device *netdev, int new_mtu) int result = 0; struct et131x_adapter *adapter = netdev_priv(netdev); - DBG_ENTER(et131x_dbginfo); - /* Make sure the requested MTU is valid */ - if (new_mtu == 0 || new_mtu > 9216) { - DBG_LEAVE(et131x_dbginfo); + if (new_mtu < 64 || new_mtu > 9216) return -EINVAL; - } /* Stop the netif queue */ netif_stop_queue(netdev); @@ -736,8 +615,8 @@ int et131x_change_mtu(struct net_device *netdev, int new_mtu) /* Alloc and init Rx DMA memory */ result = et131x_adapter_memory_alloc(adapter); if (result != 0) { - DBG_WARNING(et131x_dbginfo, - "Change MTU failed; couldn't re-alloc DMA memory\n"); + dev_warn(&adapter->pdev->dev, + "Change MTU failed; couldn't re-alloc DMA memory\n"); return result; } @@ -750,9 +629,8 @@ int et131x_change_mtu(struct net_device *netdev, int new_mtu) et131x_adapter_setup(adapter); /* Enable interrupts */ - if (MP_TEST_FLAG(adapter, fMP_ADAPTER_INTERRUPT_IN_USE)) { + if (adapter->Flags & fMP_ADAPTER_INTERRUPT_IN_USE) et131x_enable_interrupts(adapter); - } /* Restart the Tx and Rx DMA engines */ et131x_rx_dma_enable(adapter); @@ -760,8 +638,6 @@ int et131x_change_mtu(struct net_device *netdev, int new_mtu) /* Restart the netif queue */ netif_wake_queue(netdev); - - DBG_LEAVE(et131x_dbginfo); return result; } @@ -780,20 +656,14 @@ int et131x_set_mac_addr(struct net_device *netdev, void *new_mac) struct et131x_adapter *adapter = netdev_priv(netdev); struct sockaddr *address = new_mac; - DBG_ENTER(et131x_dbginfo); - // begin blux - // DBG_VERBOSE( et131x_dbginfo, "Function not implemented!!\n" ); + /* begin blux */ - if (adapter == NULL) { - DBG_LEAVE(et131x_dbginfo); + if (adapter == NULL) return -ENODEV; - } /* Make sure the requested MAC is valid */ - if (!is_valid_ether_addr(address->sa_data)) { - DBG_LEAVE(et131x_dbginfo); + if (!is_valid_ether_addr(address->sa_data)) return -EINVAL; - } /* Stop the netif queue */ netif_stop_queue(netdev); @@ -808,46 +678,47 @@ int et131x_set_mac_addr(struct net_device *netdev, void *new_mac) et131x_handle_recv_interrupt(adapter); /* Set the new MAC */ - // netdev->set_mac_address = &new_mac; - // netdev->mtu = new_mtu; + /* netdev->set_mac_address = &new_mac; */ + /* netdev->mtu = new_mtu; */ memcpy(netdev->dev_addr, address->sa_data, netdev->addr_len); - printk("%s: Setting MAC address to %02x:%02x:%02x:%02x:%02x:%02x\n", - netdev->name, netdev->dev_addr[0], netdev->dev_addr[1], - netdev->dev_addr[2], netdev->dev_addr[3], netdev->dev_addr[4], - netdev->dev_addr[5]); + printk(KERN_INFO + "%s: Setting MAC address to %02x:%02x:%02x:%02x:%02x:%02x\n", + netdev->name, + netdev->dev_addr[0], netdev->dev_addr[1], + netdev->dev_addr[2], netdev->dev_addr[3], + netdev->dev_addr[4], netdev->dev_addr[5]); /* Free Rx DMA memory */ et131x_adapter_memory_free(adapter); /* Set the config parameter for Jumbo Packet support */ - // adapter->RegistryJumboPacket = new_mtu + 14; - // blux: not needet here, w'll change the MAC + /* adapter->RegistryJumboPacket = new_mtu + 14; */ + /* blux: not needet here, we'll change the MAC */ et131x_soft_reset(adapter); /* Alloc and init Rx DMA memory */ result = et131x_adapter_memory_alloc(adapter); if (result != 0) { - DBG_WARNING(et131x_dbginfo, - "Change MAC failed; couldn't re-alloc DMA memory\n"); + dev_err(&adapter->pdev->dev, + "Change MAC failed; couldn't re-alloc DMA memory\n"); return result; } et131x_init_send(adapter); et131x_setup_hardware_properties(adapter); - // memcpy( netdev->dev_addr, adapter->CurrentAddress, ETH_ALEN ); - // blux: no, do not override our nice address + /* memcpy( netdev->dev_addr, adapter->CurrentAddress, ETH_ALEN ); */ + /* blux: no, do not override our nice address */ /* Init the device with the new settings */ et131x_adapter_setup(adapter); /* Enable interrupts */ - if (MP_TEST_FLAG(adapter, fMP_ADAPTER_INTERRUPT_IN_USE)) { + if (adapter->Flags & fMP_ADAPTER_INTERRUPT_IN_USE) et131x_enable_interrupts(adapter); - } /* Restart the Tx and Rx DMA engines */ et131x_rx_dma_enable(adapter); @@ -855,7 +726,5 @@ int et131x_set_mac_addr(struct net_device *netdev, void *new_mac) /* Restart the netif queue */ netif_wake_queue(netdev); - - DBG_LEAVE(et131x_dbginfo); return result; } diff --git a/drivers/staging/et131x/et131x_netdev.h b/drivers/staging/et131x/et131x_netdev.h index b8acd14..1eb4a92 100644 --- a/drivers/staging/et131x/et131x_netdev.h +++ b/drivers/staging/et131x/et131x_netdev.h @@ -2,7 +2,7 @@ * Agere Systems Inc. * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * http://www.agere.com * @@ -20,7 +20,7 @@ * software indicates your acceptance of these terms and conditions. If you do * not agree with these terms and conditions, do not use the software. * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * * Redistribution and use in source or binary forms, with or without @@ -41,7 +41,7 @@ * * Disclaimer * - * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN diff --git a/drivers/staging/et131x/et131x_version.h b/drivers/staging/et131x/et131x_version.h index 2ea645e..568f6c8 100644 --- a/drivers/staging/et131x/et131x_version.h +++ b/drivers/staging/et131x/et131x_version.h @@ -2,7 +2,7 @@ * Agere Systems Inc. * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * http://www.agere.com * @@ -19,7 +19,7 @@ * software indicates your acceptance of these terms and conditions. If you do * not agree with these terms and conditions, do not use the software. * - * Copyright © 2005 Agere Systems Inc. + * Copyright © 2005 Agere Systems Inc. * All rights reserved. * * Redistribution and use in source or binary forms, with or without @@ -40,7 +40,7 @@ * * Disclaimer * - * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, + * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN |