summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/radeon/ni_dpm.c
AgeCommit message (Collapse)Author
2015-02-13Reset to 3.12.37Scott Wood
2014-03-05drm/radeon/ni: fix typo in dpm sq ramping setupAlex Deucher
commit 21ed4947fdfe19b60a27b84162622e56439c7937 upstream. inverted logic. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2013-09-23drm/radeon/dpm/ni: filter clocks based on voltage/clk dep tablesAlex Deucher
filter out mclk and sclk levels higher than listed in the clk voltage dependency tables. Supporting these clocks will require additional driver tweaking that isn't supported yet. See bug: https://bugs.freedesktop.org/show_bug.cgi?id=68235 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-09-16drm/radeon/dpm: rework auto performance level enableAlex Deucher
Calling force_performance_level() from set_power_state() doesn't work on some asics because the current power state pointer has not been properly updated at that point. Move the calls to force_performance_level() out of the asic specific set_power_state() functions and into the main power state sequence. Fixes dpm resume on SI. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon/dpm: make sure dc performance level limits are valid (BTC-SI) (v2)Alex Deucher
Check to make sure the dc limits are valid before using them. Some systems may not have a dc limits table. In that case just use the ac limits. This fixes hangs on systems when the power state is changed when on battery (dc) due to invalid performance state parameters. Should fix: https://bugs.freedesktop.org/show_bug.cgi?id=68708 v2: fix up limits in dpm_init() Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-08-30drm/radeon: gcc fixes for ni dpmAlex Deucher
Newer versions of gcc seem to wander off into the weeds when dealing with variable sizes arrays in structs. Rather than indexing the arrays, use pointer arithmetic. See bugs: https://bugs.freedesktop.org/show_bug.cgi?id=66932 https://bugs.freedesktop.org/show_bug.cgi?id=66972 https://bugs.freedesktop.org/show_bug.cgi?id=66945 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon/dpm: adjust the vblank time checks for eg, ni, siAlex Deucher
According to the internal teams, we never hit the limit for mclk switching on these asics, so we can disable the check. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-07drm/radeon/dpm: fix spread spectrum setup (v2)Alex Deucher
Need to check for engine and memory clock ss separately and only enable dynamic ss if either of them are found. This should fix systems which have a ss table, but do not have entries for engine or memory. On those systems we may enable dynamic spread spectrum without enabling it on the engine or memory clocks which can lead to a hang in some cases. fixes some systems reported here: https://bugs.freedesktop.org/show_bug.cgi?id=66963 v2: fix typo Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-07drm/radeon/dpm: adjust thermal protection requirementsAlex Deucher
On rv770 and newer, clock gating is not required for thermal protection. The only requirement is that the design utilizes a thermal sensor. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-07-29drm/radeon/dpm: fix forcing performance state to low on caymanAlex Deucher
Need to program EnabledLevels to 1 to force the low state. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-07-08drm/radeon/dpm: implement vblank_too_short callback for caymanAlex Deucher
Check if we can switch the mclk during the vblank time otherwise we may get artifacts on the screen when the mclk changes. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-07-05drm/radeon/dpm: implement force performance level for caymanAlex Deucher
Allows you to force a performance level via sysfs. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-07-02drm/radeon/dpm: fix compilation with certain versions of gccMike Lothian
Add #include <linux/seq_file.h> to *_dpm.c files Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-07-01drm/radeon/dpm: add debugfs support for caymanAlex Deucher
This allows you to look at the current DPM state via debugfs. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-07-01drm/radeon/dpm: re-enable state transitions for CaymanAlex Deucher
Was disabled due to stability issues on certain boards caused by the a bug in the parsing of the atom mc reg tables. That's fixed now so re-enable. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/NI: fix TDP adjustment in set_power_stateAlex Deucher
Fixes hangs with DPM in some cases. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/dpm: fix UVD clock setting on caymanAlex Deucher
The rv770 version was using the wrong power state type. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon: fix typo in ni_print_power_stateAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27add dpm_set_power_state failure output (7xx-ni)Alex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/dpm: add dpm_set_power_state failure output (7xx-ni)Alex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/dpm: add dpm_enable failure output (7xx-ni)Alex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/kms: add dpm support for SI (v7)Alex Deucher
This adds dpm support for SI asics. This includes: - dynamic engine clock scaling - dynamic memory clock scaling - dynamic voltage scaling - dynamic pcie gen1/gen2/gen3 switching - power containment - shader power scaling Set radeon.dpm=1 to enable. v2: enable hainan support, rebase v3: guard acpi stuff v4: fix 64 bit math v5: fix 64 bit div harder v6: fix thermal interrupt check noticed by Jerome v7: attempt fix state enable Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/dpm/ni: properly catch errors in dpm setupAlex Deucher
We weren't properly catching errors in dpm_enable() and dpm_set_power_state(). Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon: update radeon_atombios_get_default_voltages for mvddAlex Deucher
Add a way to look up the bootup mvdd. Required for DPM on SI. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/dpm: validate voltages against dispclk requirementsAlex Deucher
Validate the voltages against the voltage requirements of the dispclk. We currently don't adjust the disp clock so it never changes, but we need to filter out voltage levels that are too low none the less. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/dpm/cayman: use new fixed point functions (v2)Alex Deucher
Use the new fixed point functions for leakage calculations on cayman. v2: fix up 64 bit math Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon: update radeon_atom_is_voltage_gpio() for SIAlex Deucher
SI uses a new atom table. Required for DPM on SI. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon: add missing UVD clock set in cayman dpm codeAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/dpm: add pre/post_set_power_state callback (cayman)Alex Deucher
This properly implemented dynamic state adjustment by using a working copy of the requested and current power states. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/dpm/cayman: restructure codeAlex Deucher
Needed to properly handle dynamic state adjustment. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/dpm/btc: restructure codeAlex Deucher
Needed to properly handle dynamic state adjustment. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/kms: add dpm support for cayman (v5)Alex Deucher
This adds dpm support for cayman asics. This includes: - clockgating - dynamic engine clock scaling - dynamic memory clock scaling - dynamic voltage scaling - dynamic pcie gen1/gen2 switching (requires additional acpi support) - power containment - shader power scaling Set radeon.dpm=1 to enable. v2: fold in tdp fix v3: fix indentation v4: fix 64 bit div v5: attempt to fix state enable Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com>
generated by cgit v0.10.2 at 2024-10-02 08:11:41 (GMT)