summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath9k/htc_drv_init.c
AgeCommit message (Collapse)Author
2014-02-22ath9k_htc: Do not support PowerSave by defaultOleksij Rempel
commit 6bca610d97b6139a1d7598b8009da9d339daa50f upstream. It is a copy/paste of patch provided by Sujith for ath9k. "Even though we make sure PowerSave is not enabled by default by disabling the flag, WIPHY_FLAG_PS_ON_BY_DEFAULT on init, PS could be enabled by userspace based on various factors like battery usage etc. Since PS in ath9k is just broken and has been untested for years, remove support for it, but allow a user to explicitly enable it using a module parameter." Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-22ath9k_htc: do some initial hardware configurationOleksij Rempel
Currently we configure harwdare and clock, only after interface start. In this case, if we reload module or reboot PC without configuring adapter, firmware will freeze. There is no software way to reset adpter. This patch add initial configuration and set it in disabled state, to avoid this freeze. Behaviour of this patch should be similar to: ifconfig wlan0 up; ifconfig wlan0 down. Bug: https://github.com/qca/open-ath9k-htc-firmware/issues/1 Tested-by: Bo Shi <cnshibo@gmail.com> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Cc: <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-27ath9k_htc: ifdef out IFTYPE_MESH advertisementThomas Pedersen
This is needed so the interface combination can still be validated when CONFIG_MAC80211_MESH is not enabled. Otherwise wiphy registration fails. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24ath9k_htc: Support reporting tx and rx chain mask.Ben Greear
Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12ath9k_htc: add STBC TX supportOleksij Rempel
All known ar7010+ar* device and current FW support STBC TX. This patch make use of it and suggest to send STBC if peer support it. I use wort "suggest" since currenly we have separate rate controller in FW which will make decision based on rate and hardware. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22ath9k_htc: Claim support for mgmt frame protectionJavier Cardona
Advertise support for management frame protection in hardware. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22ath9k_htc: Add support for mesh interfacesJavier Cardona
More specifically, enable AP-style beaconing on mesh ifaces and change the hw capabilities to reflect mesh support. Coexistence with a virtual STA interface was tested as working fine. Signed-off-by: Javier Cardona <javier@cozybit.com> [rebase, add iface combinations] Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08ath9k_htc: accept 1.x firmware newer than 1.3Felix Fietkau
Since the firmware has been open sourced, the minor version has been bumped to 1.4 and the API/ABI will stay compatible across further 1.x releases. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-28Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2013-01-14wireless: make the reg_notifier() voidLuis R. Rodriguez
The reg_notifier()'s return value need not be checked as it is only supposed to do post regulatory work and that should never fail. Any behaviour to regulatory that needs to be considered before cfg80211 does work to a driver should be specified by using the already existing flags, the reg_notifier() just does post processing should it find it needs to. Also make lbs_reg_notifier static. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [move lbs_reg_notifier to not break compile] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-07net: use ETHTOOL_FWVERS_LEN instead of ETHTOOL_BUSINFO_LEN for fw_ver stringsJiri Pirko
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-21ath9k/ath9k_htc: Remove WME macrosSujith Manoharan
Use the macros provided by mac80211 and remove redundant declarations inside the drivers. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-29ath9k_htc: Advertise interface combinations supportedMohammed Shafi Shajakhan
This will allow us to create virtual interface the driver supports. Also this ensures multivif support and limitation advertised by the driver is taken care in cfg80211 itself. Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_htc: Add a modparam to enable BTCOEX rather than defaultMohammed Shafi Shajakhan
Enable BTCOEX for WB193(which seems to be the only supported ath9k_htc BTCOEX chipset)only when it is enabled via modparam, rather than enabling it by default. Cc: Vivek Natarajan <nataraja@qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-26ath9k_htc: Use atomic operations for op_flagsSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-26ath9k_htc: Change default listen interval to 1Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10mac80211: don't always advertise remain-on-channelJohannes Berg
Not all devices are really capable of implementing remain-on-channel, even if it is implemented in SW, as they can't necessarily deal with channel changes while associated. Remove the WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL and add it only if either the driver has remain_on_channel implemented in the driver/device. Also add it to all drivers that advertise P2P right now since those definitely have to have it working. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10ath: Add and use pr_fmt, convert printks to pr_<level>Joe Perches
Use a more current logging style. Make sure all output is prefixed appropriately. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k_htc: Init BTCOEX inside htc_drv_gpio.cSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24ath9k_htc: claim support for IBSS RSNAntonio Quartulli
Skip group keys configuration in hardware in order to make IBSS RSN work. Keys will be managed using software. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-19ath9k_hw: make bluetooth coexistence support optional at compile timeFelix Fietkau
Many systems (e.g. embedded systems) do not have wifi modules connected to bluetooth modules, so bluetooth coexistence is irrelevant there. With the addition of MCI support, ath9k picked up quite a bit of extra code that can be compiled out this way. This patch redefines ATH9K_HW_CAP_MCI and adds an inline wrapper for querying the bluetooth coexistence scheme, allowing the compiler to eliminate code that uses it, with only very little use of #ifdef. On MIPS this reduces the total size for the modules by about 20k. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-19ath: Convert ath_dbg(bar, ATH_DBG_<FOO>, to ath_dbg(bar, FOOJoe Perches
Add ATH_DBG_ to macros to shorten the uses and reduce the line count. Coalesce ath_dbg formats. Add missing spaces to coalesced formats. Add missing newline terminations to ath_dbg formats. Align ath_dbg arguments where appropriate. Standardize ath_dbg formats without periods. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14ath9k: eliminate common->{rx,tx}_chainmaskFelix Fietkau
we already have ah->{rx,tx}chainmask for the same purpose Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24ath9k: Move ath9k_init_crypto to commonRajkumar Manoharan
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08ath9k: remove all references to subsysid, it's never usedPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath9k_htc: Inform stack about tx ack statusRajkumar Manoharan
Recent firmware changes report tx ack status properly to driver. Hence updating ath9k_htc driver capabilities. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k: Drag the driver to the year 2011Sujith Manoharan
The Times They Are a-Changin'. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k_htc: Change credit limit for UB94/95Sujith Manoharan
Reduce the credit size for UB94/95 to fix target hangs. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k_htc: Fix max subframe handlingSujith Manoharan
Commit "ath9k_htc: Fix AMPDU subframe handling" registered the maximum subframe limit of the driver with mac80211, which was used in ADDBA negotiation. While technically correct, this causes inter-operability issues with a few APs. Revert to the older behavior to fix this. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-29ath9k_htc: Revamp LED managementSujith Manoharan
Remove all the convoluted hacks in the driver and simplify things by making use of mac80211's LED triggers. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28ath9k_htc: Increase credit size for AR7010 devicesSujith Manoharan
Bump the firmware version to 1.2 Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k_htc: Fix AMPDU subframe handlingSujith Manoharan
* Register the driver's maximum ampdu subframe limit to mac80211. * Cleanup the target capabilities structure and fix an endian issue. * Fix BTCOEX by sending a command to the target when the BT priority changes. * Bump the required firmware version to 1.1 Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-19ath9k_htc: Cleanup HTC debugfsRajkumar Manoharan
Move the ath9k_htc debugfs under ieee80211 to be inline with ath9k driver and it also helps to simplify debug code. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Acked-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Enable AP and P2P modesSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Add a timer to cleanup WMI eventsSujith Manoharan
Occasionally, a WMI event would arrive ahead of the TX URB completion handler. Discarding these events would exhaust the available TX slots, so handle them by running a timer cleaning up such events. Also, timeout packets for which TX completion events have not arrived. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Add support for TX completionSujith Manoharan
Now that the infrastructure is in place, process WMI TX status events and complete packets. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Move TX specific stuff to a separate structureSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Queue WMI eventsSujith Manoharan
Use a queue to handle WMI events and schedule a tasklet to process the events. This fixes the race between the WMI event ISR and the SWBA tasklet when the arrival of WMI events in quick succession could overwrite the SWBA data before the tasklet from a previous iteration could have been scheduled. Also, drain the WMI queue properly. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Handle buffered frames in AP modeSujith Manoharan
Use the CAB endpoint to send buffered multicast or broadcast frames after each SWBA event. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Add beacon slotsSujith Manoharan
Beacon transmission is now handled through a slot mechanism. This allows multiple beaconing interfaces to be be present. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-13ath9k_htc: Add a WMI command to get the firmware versionSujith Manoharan
Also, update the wiphy information and use the correct device pointer when registering. This would fix ethtool. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: remove pCap->keycache_sizeFelix Fietkau
Similar to the number of tx queue, the number of keycache entries depends on the chip and shouldn't be messed with based on EEPROM data. Remove this field and stick to using AR_KEYTABLE_SIZE Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: add a new register op for read-mask-writeFelix Fietkau
Reduces the number of calls to register ops. On MIPS this reduces the ath9k_hw binary size from 321k down to 310k Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k_hw: embed the ath_ops callbacks in the ath_hw structFelix Fietkau
With this change, loading the address to a register read/write function costs only one pointer dereference instead of two. On MIPS this reduces ath9k_hw binary size from 326k down to 321k. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Add debug code to print endpoint mappingSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23ath9k_htc: Add ANI for AP modeSujith Manoharan
The time granularity for the ANI task is different for AP and station mode. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-28Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: drivers/net/wireless/ath/ath9k/init.c
2011-01-27ath9k_htc: fix race conditions when stop deviceStanislaw Gruszka
We do not kill any scheduled tasklets when stopping device, that may cause usage of resources after free. Disable interrupts, kill tasklets and then works in correct order. Cc: stable@kernel.org Tested-by: Sujith <m.sujith@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19ath9k_htc: Add multiple register read APISujith Manoharan
This would decrease latency in reading bulk registers. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-04Revert "ath9k: Parse DTIM period from mac80211"Mohammed Shafi Shajakhan
This reverts commit 0ce3bcfc84900a64347b0fe1140229bd81314008. Event though with the above commit we obtain the configured DTIM period from the AP rather than always hardcoding it to '1', this seems to cause problems under the following scenarios: * Preventing association with broken AP's * Adds latency in roaming So its better to always use the safe value of '1' for dtim period Cc: Jouni Malinen <Jouni.Malinen@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v0.10.2 at 2024-11-02 02:45:41 (GMT)