summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi/pcie/drv.c
AgeCommit message (Collapse)Author
2015-02-13Reset to 3.12.37Scott Wood
2013-10-02iwlwifi: pcie: add SKUs for 6000, 6005 and 6235 seriesEmmanuel Grumbach
Add some new PCI IDs to the table for 6000, 6005 and 6235 series. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-02iwlwifi: pcie: add new SKUs for 7000 & 3160 NIC seriesMatti Gottlieb
Add some new PCI IDs to the table for 7000 & 3160 series Cc: stable@vger.kernel.org Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-16Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2013-08-16iwlwifi: return -ENOMEM instead of NULL when OOM in iwl_drv_start()Luciano Coelho
The callers of iwl_drv_start() are probe functions. If a probe function returns 0, it means it succeeded. So if NULL was returned by iwl_drv_start(), it would be considered as a success. Fix this by returning -ENOMEM if the driver struct allocation fails in iwl_drv_start(). Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-12iwlwifi: pcie: don't swallow error codes in iwl_trans_pcie_alloc()Luciano Coelho
The iwl_trans_pcie_alloc() function doesn't pass up error codes returned from functions it calls, swallowing them and returning NULL in all failure cases. The caller checks if the return value is NULL and returns -ENOMEM. This is not correct, because in certain cases the failure was not due to an OOM situation. To fix this, modify the iwl_trans_pcie_alloc() function to use ERR_PTR() to return error codes and clean up the error handling code a bit. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-09Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2013-08-09Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2013-08-06iwlwifi: remove transport suspend/resume indirectionJohannes Berg
There's no reason for the transport to call itself through indirect function pointers, inline the (little) code there is and remove the indirection completely. Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-31iwlwifi: mvm: add high temperature SKU thermal throttling parametersEytan Lifshitz
When the NIC is expected to operate in high temperature, it is advisable to put more aggresive thermal throttling parameters, in order to prevent CT-kill. Signed-off-by: eytan lifshitz <eytan.lifshitz@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-22iwlwifi: add DELL SKU for 5150 HMCEmmanuel Grumbach
This SKU was missing in the list of supported devices https://bugzilla.kernel.org/show_bug.cgi?id=60577 Cc: <stable@vger.kernel.org> [all versions] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-13iwlwifi: create opmode/device dependenciesJohannes Berg
The older devices (pre-7000/3000 series) all only work with the DVM opmode due to firmware availability, while newer ones will only work with the MVM opmode for the same reason. When building a driver that only has one of MVM or DVM, there's no reason to build the device support and have the PCIe IDs for all devices since they can't be used anyway, so avoid that. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-13iwlwifi: add new 7260 and 3160 series device IDsOren Givon
Add new device IDs and configurations to support all the devices. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-18iwlwifi: add a subdevice ID for 7000 seriesEmmanuel Grumbach
Add another ID for a 7000 series device. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: add new pci id for 6x35 seriesShuduo Sang
some new thinkpad laptops use intel chip with new pci id need be added lspci -vnn output: Network controller [0280]: Intel Corporation Centrino Advanced-N 6235 [8086:088f] (rev 24) Subsystem: Intel Corporation Device [8086:5260] Signed-off-by: Shuduo Sang <sangshuduo@gmail.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06iwlwifi: make device configuration bus agnosticEmmanuel Grumbach
Newer devices can work on different buses. This means that their configuration can be shared between different buses. Hence the configuration structures should exported to all the buses and not only to PCIE. Change this. Note that this requires all the fields to be the same amongst the buses. If differences will appear, we can always define a part that is bus dependent. Today, this is not needed. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06iwlwifi: a few fixes in licenseEmmanuel Grumbach
7000.c was released as GPL only by mistake: it should be dual licensed - GPL / BSD. The file that contains the license in the kernel is COPYING and not LICENSE.GPL. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-30iwlwifi: add 7000 series device configurationJohannes Berg
Add configuration and detection code for the new 7000 series, with 7260 and 3160 devices. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-24iwlwifi: update copyrightJohannes Berg
Update Copyright notices to 2013. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-11Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2012-12-06iwlwifi: remove __dev* attributesBill Pemberton
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Wey-Yi Guy <wey-yi.w.guy@intel.com> Cc: Intel Linux Wireless <ilw@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-29iwlwifi: return real info in probe failureEmmanuel Grumbach
Don't return a hard coded -EFAULT, but rather the error that occurred in the flow. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-19iwlwifi: Remove duplicate inclusion of iwl-trans.h in pcie/drv.cSachin Kamat
iwl-trans.h was included twice. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-06iwlwifi: remove unused IDI code stubsJohannes Berg
These stubs are from internal experimental code and aren't needed in the driver in the kernel so just remove them. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-26iwlwifi: rework the iwlwifi debugfs structureMeenakshi Venkataraman
The generic part of the driver now creates all debugfs directories. It creates a root directory directly in the the root of the debugfs filesystem and within that directories for each device, named after the device ID of the devices iwlwifi is attached to. In the cfg80211/mac80211 directory there's now a link to the toplevel iwlwifi debugfs directory to make it easier to find the debugfs files. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06iwlwifi: move PCIe into subdirectoryJohannes Berg
Structure the code a bit more and move all PCIe code including the hardware configuration files into a PCIe specific subdirectory. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v0.10.2 at 2024-07-30 11:31:14 (GMT)