summaryrefslogtreecommitdiff
path: root/drivers/scsi/bfa/bfa_svc.h
AgeCommit message (Collapse)Author
2013-06-26[SCSI] bfa: Add dynamic diagnostic port supportVijaya Mohan Guvva
D-Port is a new port type created with the intention of running link level diagnostic tests like loopback, traffic test. In static D-port mode, user configures the port to D-port mode and starts the test, but in dynamic D-port, once the Brocade switch port is configured to D-port, it will reject the regular FLOGI from HBA with reason that it is in D-port mode. So based on the reason code HBA port will turn itself into D-port and start diagnostic test. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@brocade.com> Signed-off-by: Vijaya Mohan Guvva <vmohan@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-26[SCSI] bfa: Forward Error Correction status queryVijaya Mohan Guvva
This patch includes changes to get FC HBA feature Forward Error Correction (FEC) (enabled at 16Gig speed) status from firmware and to return to brocade HBA management utility. Signed-off-by: Vijaya Mohan Guvva <vmohan@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-26[SCSI] bfa: Support for FC BB credit recoveryVijaya Mohan Guvva
This patch includes changes to 1) Enable/disable fc credit recovery on Brocade FC adapter port operating at max supported speed. 2) Get credit recovery status and stats related to credit loss and recovered credits Signed-off-by: Vijaya Mohan Guvva <vmohan@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-07[SCSI] bfa: Add support for user to configure bandwidth on QoS prioritiesKrishna Gudipati
Made changes to provide an option for user to configure the bandwidth percentage for High/Medium/Low QoS priorities. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@brocade.com> Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-07[SCSI] bfa: Add diagnostic port (D-Port) supportKrishna Gudipati
- Introduced support for D-Port which is a new port mode during which link level diagnostics can be run. - Provided mechanism to dynamically configure D-Port and initiate diagnostic tests to isolate any link level issues. - In D-Port mode, the HBA port does not participate in fabric or login to the remote device or run data traffic. - Diagnostic tests include running various loopback tests in conjunction with the attached device. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-07[SCSI] bfa: Add support for FC Arbitrated Loop topology.Krishna Gudipati
- Add private loop topology support at 2G/4G/8G speeds with following limitations 1. No support for multiple initiators in the loop 2. No public loop support. If attached to a loop with an FL_Port, device continues to work as a private NL_Port in the loop 3. No auto topology detection. User has to manually set the configured topology to loop if attaching to loop. - When loop topology is configured, enabling FC port features QoS/Trunk/TRL are not allowed and vice versa. Signed-off-by: Vijaya Mohan Guvva <vmohan@brocade.com> Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-24[SCSI] bfa: Add PowerPC support and enable PCIE AER handling.Krishna Gudipati
- Added few missing endian swap changes to support BFA on PowerPC. - Added PCIE AER support to BFA: a) Implemented the PCI error handler entry points. b) Made changes to FCS state machine to handle STOP event from the PCI error detected entry point. c) Made changes to the IO Controller state machine to handle SUSPEND event from the PCI error detected entry point. d) Made changes to restart the BFA operations on a slot_reset completion. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-24[SCSI] bfa: Make changes to FCXP resource management.Krishna Gudipati
- Made changes to split FCXP resources as request and response resources. - The split will reduce the contention for FCXP resources in an open zone config. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-28[SCSI] bfa: Revised Fabric Assigned Address(FAA) feature implementation.Krishna Gudipati
Made changes to the Fabric Assigned Address(FAA) feature implementation. Introduced the IOCFC state machine, which now handles the FAA logic, IOC and BFA sub-modules enablement. Removed un-wanted FAA enable/disable routines; FAA is enabled by default. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-01-10[SCSI] bfa: Revert back the current LUN Masking Implementation.Krishna Gudipati
This patch reverts the current LUN Masking Implementation. We re-implemented this feature using the SCSI Slave Callout's as per the review comments. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-27[SCSI] bfa: Introduced initiator based lun masking feature.Krishna Gudipati
- Added support to enable initiator based lun masking. - Initiator based Lun masking works similar to zoning where initiator port is allowed to see only those LUNs which are configured to be seen. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-27[SCSI] bfa: Added support to collect and reset fcport statsKrishna Gudipati
- Added support to collect and reset fcport stats. - Modified design to allow multiple requests for fcport stats. - fcport will remember the stats request in its stats_pending queue and service each of the queued requests after receiving a firmware response for the prior request. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] bfa: Added HBA diagnostics support.Krishna Gudipati
- Added diagnostics sub-module to BFA. - Implemented interface to perform memtest/loopback test and some other diagnostics tests. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] bfa: DMA memory allocation enhancement.Krishna Gudipati
- Modified the design such that each BFA sub-module will provide the amount of DMA and KVA memory needed by it and queues the same request to the global dma and kva info queues. - During the memory allocation we iterate over this queue to allocate the dma and kva memory requested by sub-modules. - The change is needed to avoid requesting the aggregate amount of memory needed by all the BFA sub-modules as one contiguous chunk. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] bfa: Brocade-1860 Fabric Adapter vHBA support.Krishna Gudipati
- Introduced partitioning of the BFA resources. - Added h/w queue ID in CPE messages, firmware uses h/w queue ID from messages to pick a matching RME queue. - Added message header to bfa_reqq_produce(). h/w queue ID is set in the message header and firmware modules use h/w queue ID from message header instead of from cpqe event. - Made changes to allow using all 256 queues of Brocade-1860 asic. Previously only a single queue per queue group was used. - Added function tag to BFI message header. Only used by FC BFI messages. Used to translate host tag to firmware tag. bfa_lpuid() is changed to bfa_fn_lpu() that encodes both PCI function and port ID in BFI message header. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] bfa: Added Fabric Assigned Address(FAA) supportKrishna Gudipati
- Updated/added data structures and definitions to support FAA protocol. - Modified the IOC state machine to support FAA. - Introduced FAA feature configuration - enable/disable/query. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] bfa: FC credit recovery and misc bug fixes.Krishna Gudipati
- Introduce FC credit recovery. - Added module parameter to enable/disable credit recovery. Bug Fixes: - Removed check for ignoring plogi from initiator in switched fabric mode. - The ABTS for PLOGI is going out few millisecs earlier due to FW timer calibration (around 300 miilisecs earlier). So there is a window if an accept comes during this time HBA would have initiated an ABORT. - Added 1 to FC_ELS_TOV for compensating for FW timer. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29[SCSI] bfa: Add pbc port disable check and fix LPS message nameKrishna Gudipati
- Add PBC port Disabled condition check. - Rename incorrectly named LPS I2H messages. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2010-12-21[SCSI] bfa: direct attach mode fix.Krishna Gudipati
- Direct attach is not working due to the check of PID in fcxp_send request. - Added logic to set the lps->lp_pid with the PID assigned for n2n mode. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] bfa: Store port configuration in flash for persistency.Krishna Gudipati
When the bfa driver is loaded a flogi is sent without the knowledge of trunking configuration. This normal flogi causes the switch ports which had trunking enabled to go to persistent offline. Solution is to store the port configuration (which has trunking info) in the flash for persistency. The firmware will read this configuration when the very first fcport enable is received. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] bfa: clean up one line functionsMaggie Zhang
Cleaned up one line functions. Signed-off-by: Maggie Zhang <xmzhang@brocade.com> Signed-off-by: Jing Huang <huangj@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] bfa: remove unused and empty functionsMaggie Zhang
Removed unused and empty functions. Signed-off-by: Maggie Zhang <xmzhang@brocade.com> Signed-off-by: Jing Huang <xmzhang@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] bfa: fix comments for header filesJing Huang
This patch addresses the comments from Randy Dunlap (Randy.Dunlap@oracle.com) regarding comment blocks that begining with "/**". bfa driver comments currently do not follow kernel-doc convention, we hence replace all /** with /* and **/ with */. Signed-off-by: Jing Huang <huangj@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-17[SCSI] bfa: cleanup driverKrishna Gudipati
We have flattened the BFA hierarchy and also reduced the number of source and header files we used to have earlier. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>