summaryrefslogtreecommitdiff
path: root/drivers/watchdog/orion_wdt.c
AgeCommit message (Collapse)Author
2014-04-07Rewind v3.13-rc3+ (78fd82238d0e5716) to v3.12Scott Wood
2013-11-17watchdog: Get rid of MODULE_ALIAS_MISCDEV statementsJean Delvare
I just can't find any value in MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) and MODULE_ALIAS_MISCDEV(TEMP_MINOR) statements. Either the device is enumerated and the driver already has a module alias (e.g. PCI, USB etc.) that will get the right driver loaded automatically. Or the device is not enumerated and loading its driver will lead to more or less intrusive hardware poking. Such hardware poking should be limited to a bare minimum, so the user should really decide which drivers should be tried and in what order. Trying them all in arbitrary order can't do any good. On top of that, loading that many drivers at once bloats the kernel log. Also many drivers will stay loaded afterward, bloating the output of "lsmod" and wasting memory. Some modules (cs5535_mfgpt which gets loaded as a dependency) can't even be unloaded! If defining char-major-10-130 is needed then it should happen in user-space. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Zwane Mwaikambo <zwane@arm.linux.org.uk> Cc: Jim Cromie <jim.cromie@gmail.com>
2013-11-17watchdog: Remove redundant of_match_ptrSachin Kamat
of_match_ptr() is a macro used to avoid undefined reference error if CONFIG_OF is used to selectively compile in or out the data structure. It is defined as follows: #ifdef CONFIG_OF #define of_match_ptr(ptr) ptr #else #define of_match_ptr(ptr) NULL #endif In the case of this series, none of the drivers use CONFIG_OF macro to compile out the data structure (i.e., the data structure is always defined). Hence the use of of_match_ptr() does not make any sense. Thus removing it to make the code look simpler for readability. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-07-11Watchdog: fix clearing of the watchdog interruptRussell King
The bits in BRIDGE_CAUSE are documented as RW0C - read, write 0 to clear. If we read the register, mask off the watchdog bit, and write it back, we're actually clearing every interrupt which wasn't pending at the time we read the register - and that is racy. Fix this to only write ~WATCHDOG_BIT to the register, which means we write as zero only the watchdog bit. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-07-11Watchdog: allow orion_wdt to be built for DoveRussell King
The watchdog infrastructure in Dove is no different from that in Orion5x or Kirkwood, so let's enable it for Dove. The only things missing are a few register settings in Dove's bridge-regs.h. Rather than duplicating the same register bit masks for the RSTOUTn_MASK and BRIDGE_CAUSE registers, move the definitions into the watchdog driver itself. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01watchdog: add timeout-sec property bindingFabio Porcedda
this patchset add the timeout-sec property to the following drivers: orion_wdt, pnx4008_wdt, s3c2410_wdt and at91sam9_wdt. The at91sam9_wdt is tested on evk-pr3, the other drivers are compile tested only. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: Masanari Iida <standby24x7@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-03-01watchdog: orion_wdt: Add platform aliasLubomir Rintel
...so that it's automatically picked up on relevant platforms. Tested on Kirkwood-based GuruPlug. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-12-19watchdog: Orion: Fix possible null-deference in orion_wdt_probeJason Gunthorpe
If the DT does not include a regs parameter then the null res would be dereferenced. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-11-28watchdog: remove use of __devexitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28watchdog: remove use of __devinitdataBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinitdata is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28watchdog: remove use of __devinitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28watchdog: remove use of __devexit_pBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-02Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc Marvell Orion device-tree updates from Olof Johansson: "This contains a set of device-tree conversions for Marvell Orion platforms that were staged early but took a few tries to get the branch into a format where it was suitable for us to pick up. Given that most people working on these platforms are hobbyists with limited time, we were a bit more flexible with merging it even though it came in late." * tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits) ARM: Kirkwood: Replace mrvl with marvell ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT. ARM: Kirkwood: Describe Dreamplug LEDs in DT. ARM: Kirkwood: Describe iConnects LEDs in DT. ARM: Kirkwood: Describe iConnects temperature sensor in DT. ARM: Kirkwood: Describe IB62x0 LEDs in DT. ARM: Kirkwood: Describe IB62x0 gpio-keys in DT. ARM: Kirkwood: Describe DNS32? gpio-keys in DT. ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings ARM: Kirkwood: Describe DNS325 temperature sensor in DT. ARM: Kirkwood: Use DT to configure SATA device. ARM: kirkwood: use devicetree for SPI on dreamplug ARM: kirkwood: Add LS-XHL and LS-CHLv2 support ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net ARM: Kirkwood: Add basic device tree support for QNAP TS219. ATA: sata_mv: Add device tree support ARM: Orion: DTify the watchdog timer. ARM: Orion: Add arch support needed for I2C via DT. ARM: kirkwood: use devicetree for orion-spi ... Conflicts: drivers/watchdog/orion_wdt.c
2012-07-27ARM: Orion: DTify the watchdog timer.Andrew Lunn
Add device tree support to the Orion watchdog timer, and enable its use in the kirkwood devices using device tree. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com>
2012-07-23watchdog: orion_wdt: Convert driver to watchdog coreAxel Lin
Convert orion_wdt driver to use watchdog framework API. Signed-off-by: Axel Lin <axel.lin@gmail.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-08ARM: Orion: WDT: Add clk/clkdev supportAndrew Lunn
Remove tclk from platform data. This makes the platform data structure empty, so remove it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-03-28Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds
Pull watchdog updates from Wim Van Sebroeck: - Removal of the Documentation/watchdog/00-INDEX file - Fix boot status reporting for imx2_wdt - clean-up sp805_wdt, pnx4008_wdt and mpcore_wdt - convert printk in watchdog drivers to pr_ functions - change nowayout module parameter to bool for every watchdog device - conversion of jz4740_wdt, pnx4008_wdt, max63xx_wdt, softdog, ep93xx_wdt, coh901327 and txx9wdt to new watchdog API - Add support for the WDIOC_GETTIMELEFT ioctl call to the new watchdog API - Change the new watchdog API so that the driver updates the timeout value - two fixes for the xen_wdt driver Fix up conflicts in ep93xx driver due to the same patches being merged through separate branches. * git://www.linux-watchdog.org/linux-watchdog: (33 commits) watchdog: txx9wdt: fix timeout watchdog: Convert txx9wdt driver to watchdog framework watchdog: coh901327_wdt.c: fix timeout watchdog: coh901327: convert to use watchdog core watchdog: Add support for WDIOC_GETTIMELEFT IOCTL in watchdog core watchdog: ep93xx_wdt: timeout is an unsigned int value. watchdog: ep93xx_wdt: Fix timeout after conversion to watchdog core watchdog: Convert ep93xx driver to watchdog core watchdog: sp805: Use devm routines watchdog: sp805: replace readl/writel with lighter _relaxed variants watchdog: sp805: Fix documentation style comment watchdog: mpcore_wdt: Allow platform_get_irq() to fail watchdog: mpcore_wdt: Use devm routines watchdog: mpcore_wdt: Rename dev to pdev for pointing to struct platform_device watchdog: xen: don't clear is_active when xen_wdt_stop() failed watchdog: xen: don't unconditionally enable the watchdog during resume watchdog: fix compiler error for missing parenthesis watchdog: ep93xx_wdt.c: fix platform probe watchdog: ep93xx: Convert the watchdog driver into a platform device. watchdog: fix set_timeout operations ...
2012-03-27watchdog: nowayout is boolWim Van Sebroeck
nowayout is actually a boolean value. So make it bool for all watchdog device drivers. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-03-27watchdog: Use pr_<fmt> and pr_<level>Joe Perches
Use the current logging styles. Make sure all output has a prefix. Add missing newlines. Remove now unnecessary PFX, NAME, and miscellaneous other #defines. Coalesce formats. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-03-16ARM: orion: wdt: use resource vice direct accessJason Cooper
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-01-06watchdog: convert drivers/watchdog/* to use module_platform_driver()Axel Lin
This patch converts the drivers in drivers/watchdog/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Nicolas Thill <nico@openwrt.org> Cc: Florian Fainelli <florian@openwrt.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Marc Zyngier <maz@misterjones.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Alejandro Cabrera <aldaya@gmail.com> Cc: "George G. Davis" <gdavis@mvista.com> Cc: Sylver Bruneau <sylver.bruneau@googlemail.com> Cc: Vitaly Wool <vital@embeddedalley.com> Cc: Mika Westerberg <mika.westerberg@iki.fi> Cc: Timo Kokkonen <timo.t.kokkonen@nokia.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-06watchdog: Use DEFINE_SPINLOCK() for static spinlocksAxel Lin
Rather than just defining static spinlock_t variables and then initializing them later in init functions, simply define them with DEFINE_SPINLOCK() and remove the calls to spin_lock_init(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Nicolas Thill <nico@openwrt.org> Cc: Heiko Ronsdorf <hero@ihg.uni-duisburg.de> Cc: Rodolfo Giometti <giometti@ascensit.com> Cc: Andrey Panin <pazke@donpac.ru> Cc: Guido Guenther <agx@sigxcpu.org> Cc: Curt E Bruns <curt.e.bruns@intel.com> Cc: Deepak Saxena <dsaxena@plexity.net> Cc: Andrew Victor <linux@maxim.org.za> Cc: George G. Davis <gdavis@mvista.com> Cc: Sylver Bruneau <sylver.bruneau@googlemail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-06-08[ARM] Orion/Kirkwood: rename orion5x_wdt to orion_wdtNicolas Pitre
The Orion watchdog driver is also used on Kirkwood. Convention is to use orion5x for stuff specific to 88F5xxx Orion chips and simply "orion" for shared stuff across SoCs including Kirkwood. Signed-off-by: Nicolas Pitre <nico@marvell.com>