Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'

34 files changed, 157 insertions, 1144 deletions

diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c
index dfa3760..8e7411d 100644
--- a/arch/arm/cpu/armv7/omap-common/clocks-common.c
+++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c
@@ -418,55 +418,6 @@ static void setup_dplls(void)
 #endif
 }
 
-#ifdef CONFIG_SYS_CLOCKS_ENABLE_ALL
-static void setup_non_essential_dplls(void)
-{
-	u32 abe_ref_clk;
-	const struct dpll_params *params;
-
-	/* IVA */
-	clrsetbits_le32((*prcm)->cm_bypclk_dpll_iva,
-		CM_BYPCLK_DPLL_IVA_CLKSEL_MASK, DPLL_IVA_CLKSEL_CORE_X2_DIV_2);
-
-	params = get_iva_dpll_params(*dplls_data);
-	do_setup_dpll((*prcm)->cm_clkmode_dpll_iva, params, DPLL_LOCK, "iva");
-
-	/* Configure ABE dpll */
-	params = get_abe_dpll_params(*dplls_data);
-#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
-	abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK;
-
-	if (omap_revision() == DRA752_ES1_0)
-		/* Select the sys clk for dpll_abe */
-		clrsetbits_le32((*prcm)->cm_abe_pll_sys_clksel,
-				CM_CLKSEL_ABE_PLL_SYS_CLKSEL_MASK,
-				CM_ABE_PLL_SYS_CLKSEL_SYSCLK2);
-#else
-	abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK;
-	/*
-	 * We need to enable some additional options to achieve
-	 * 196.608MHz from 32768 Hz
-	 */
-	setbits_le32((*prcm)->cm_clkmode_dpll_abe,
-			CM_CLKMODE_DPLL_DRIFTGUARD_EN_MASK|
-			CM_CLKMODE_DPLL_RELOCK_RAMP_EN_MASK|
-			CM_CLKMODE_DPLL_LPMODE_EN_MASK|
-			CM_CLKMODE_DPLL_REGM4XEN_MASK);
-	/* Spend 4 REFCLK cycles at each stage */
-	clrsetbits_le32((*prcm)->cm_clkmode_dpll_abe,
-			CM_CLKMODE_DPLL_RAMP_RATE_MASK,
-			1 << CM_CLKMODE_DPLL_RAMP_RATE_SHIFT);
-#endif
-
-	/* Select the right reference clk */
-	clrsetbits_le32((*prcm)->cm_abe_pll_ref_clksel,
-			CM_ABE_PLL_REF_CLKSEL_CLKSEL_MASK,
-			abe_ref_clk << CM_ABE_PLL_REF_CLKSEL_CLKSEL_SHIFT);
-	/* Lock the dpll */
-	do_setup_dpll((*prcm)->cm_clkmode_dpll_abe, params, DPLL_LOCK, "abe");
-}
-#endif
-
 u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic)
 {
 	u32 offset_code;
@@ -760,10 +711,6 @@ void prcm_init(void)
 		timer_init();
 		scale_vcores(*omap_vcores);
 		setup_dplls();
-#ifdef CONFIG_SYS_CLOCKS_ENABLE_ALL
-		setup_non_essential_dplls();
-		enable_non_essential_clocks();
-#endif
 		setup_warmreset_time();
 		break;
 	default:
diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c
index cd6289b..429c4be 100644
--- a/arch/arm/cpu/armv7/omap-common/emif-common.c
+++ b/arch/arm/cpu/armv7/omap-common/emif-common.c
@@ -179,8 +179,7 @@ void emif_update_timings(u32 base, const struct emif_regs *regs)
 	writel(regs->temp_alert_config, &emif->emif_temp_alert_config);
 	writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw);
 
-	if ((omap_revision() >= OMAP5430_ES1_0) ||
-				(omap_revision() == DRA752_ES1_0)) {
+	if ((omap_revision() >= OMAP5430_ES1_0) || is_dra7xx()) {
 		writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0,
 			&emif->emif_l3_config);
 	} else if (omap_revision() >= OMAP4460_ES1_0) {
@@ -309,7 +308,7 @@ static void ddr3_init(u32 base, const struct emif_regs *regs)
 	 * The same sequence should work on OMAP5432 as well. But strange that
 	 * it is not working
 	 */
-	if (omap_revision() == DRA752_ES1_0) {
+	if (is_dra7xx()) {
 		do_ext_phy_settings(base, regs);
 		writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config);
 		writel(regs->sdram_config_init, &emif->emif_sdram_config);
diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
index 85d3754..bf29510 100644
--- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c
+++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
@@ -43,16 +43,10 @@ static void set_mux_conf_regs(void)
 		set_muxconf_regs_essential();
 		break;
 	case OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL:
-#ifdef CONFIG_SYS_ENABLE_PADS_ALL
-		set_muxconf_regs_non_essential();
-#endif
 		break;
 	case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR:
 	case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH:
 		set_muxconf_regs_essential();
-#ifdef CONFIG_SYS_ENABLE_PADS_ALL
-		set_muxconf_regs_non_essential();
-#endif
 		break;
 	}
 }
diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c
index 1b2f439..4dec73e 100644
--- a/arch/arm/cpu/armv7/omap4/hw_data.c
+++ b/arch/arm/cpu/armv7/omap4/hw_data.c
@@ -399,91 +399,6 @@ void enable_basic_uboot_clocks(void)
 			 1);
 }
 
-/*
- * Enable non-essential clock domains, modules and
- * do some additional special settings needed
- */
-void enable_non_essential_clocks(void)
-{
-	u32 const clk_domains_non_essential[] = {
-		(*prcm)->cm_mpu_m3_clkstctrl,
-		(*prcm)->cm_ivahd_clkstctrl,
-		(*prcm)->cm_dsp_clkstctrl,
-		(*prcm)->cm_dss_clkstctrl,
-		(*prcm)->cm_sgx_clkstctrl,
-		(*prcm)->cm1_abe_clkstctrl,
-		(*prcm)->cm_c2c_clkstctrl,
-		(*prcm)->cm_cam_clkstctrl,
-		(*prcm)->cm_dss_clkstctrl,
-		(*prcm)->cm_sdma_clkstctrl,
-		0
-	};
-
-	u32 const clk_modules_hw_auto_non_essential[] = {
-		(*prcm)->cm_l3instr_l3_3_clkctrl,
-		(*prcm)->cm_l3instr_l3_instr_clkctrl,
-		(*prcm)->cm_l3instr_intrconn_wp1_clkctrl,
-		(*prcm)->cm_l3init_hsi_clkctrl,
-		0
-	};
-
-	u32 const clk_modules_explicit_en_non_essential[] = {
-		(*prcm)->cm1_abe_aess_clkctrl,
-		(*prcm)->cm1_abe_pdm_clkctrl,
-		(*prcm)->cm1_abe_dmic_clkctrl,
-		(*prcm)->cm1_abe_mcasp_clkctrl,
-		(*prcm)->cm1_abe_mcbsp1_clkctrl,
-		(*prcm)->cm1_abe_mcbsp2_clkctrl,
-		(*prcm)->cm1_abe_mcbsp3_clkctrl,
-		(*prcm)->cm1_abe_slimbus_clkctrl,
-		(*prcm)->cm1_abe_timer5_clkctrl,
-		(*prcm)->cm1_abe_timer6_clkctrl,
-		(*prcm)->cm1_abe_timer7_clkctrl,
-		(*prcm)->cm1_abe_timer8_clkctrl,
-		(*prcm)->cm1_abe_wdt3_clkctrl,
-		(*prcm)->cm_l4per_gptimer9_clkctrl,
-		(*prcm)->cm_l4per_gptimer10_clkctrl,
-		(*prcm)->cm_l4per_gptimer11_clkctrl,
-		(*prcm)->cm_l4per_gptimer3_clkctrl,
-		(*prcm)->cm_l4per_gptimer4_clkctrl,
-		(*prcm)->cm_l4per_hdq1w_clkctrl,
-		(*prcm)->cm_l4per_mcbsp4_clkctrl,
-		(*prcm)->cm_l4per_mcspi2_clkctrl,
-		(*prcm)->cm_l4per_mcspi3_clkctrl,
-		(*prcm)->cm_l4per_mcspi4_clkctrl,
-		(*prcm)->cm_l4per_mmcsd3_clkctrl,
-		(*prcm)->cm_l4per_mmcsd4_clkctrl,
-		(*prcm)->cm_l4per_mmcsd5_clkctrl,
-		(*prcm)->cm_l4per_uart1_clkctrl,
-		(*prcm)->cm_l4per_uart2_clkctrl,
-		(*prcm)->cm_l4per_uart4_clkctrl,
-		(*prcm)->cm_wkup_keyboard_clkctrl,
-		(*prcm)->cm_wkup_wdtimer2_clkctrl,
-		(*prcm)->cm_cam_iss_clkctrl,
-		(*prcm)->cm_cam_fdif_clkctrl,
-		(*prcm)->cm_dss_dss_clkctrl,
-		(*prcm)->cm_sgx_sgx_clkctrl,
-		0
-	};
-
-	/* Enable optional functional clock for ISS */
-	setbits_le32((*prcm)->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK);
-
-	/* Enable all optional functional clocks of DSS */
-	setbits_le32((*prcm)->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK);
-
-	do_enable_clocks(clk_domains_non_essential,
-			 clk_modules_hw_auto_non_essential,
-			 clk_modules_explicit_en_non_essential,
-			 0);
-
-	/* Put camera module in no sleep mode */
-	clrsetbits_le32((*prcm)->cm_cam_clkstctrl,
-			MODULE_CLKCTRL_MODULEMODE_MASK,
-			CD_CLKCTRL_CLKTRCTRL_NO_SLEEP <<
-			MODULE_CLKCTRL_MODULEMODE_SHIFT);
-}
-
 void hw_data_init(void)
 {
 	u32 omap_rev = omap_revision();
diff --git a/arch/arm/cpu/armv7/omap5/abb.c b/arch/arm/cpu/armv7/omap5/abb.c
index 31b6795..3bf8897 100644
--- a/arch/arm/cpu/armv7/omap5/abb.c
+++ b/arch/arm/cpu/armv7/omap5/abb.c
@@ -28,18 +28,25 @@
 s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb)
 {
 	u32 vset;
+	u32 fuse_enable_mask = OMAP5_ABB_FUSE_ENABLE_MASK;
+	u32 fuse_vset_mask = OMAP5_ABB_FUSE_VSET_MASK;
 
+	if (!is_omap54xx()) {
+		/* DRA7 */
+		fuse_enable_mask = DRA7_ABB_FUSE_ENABLE_MASK;
+		fuse_vset_mask = DRA7_ABB_FUSE_VSET_MASK;
+	}
 	/*
 	 * ABB parameters must be properly fused
 	 * otherwise ABB should be disabled
 	 */
 	vset = readl(fuse);
-	if (!(vset & OMAP5_ABB_FUSE_ENABLE_MASK))
+	if (!(vset & fuse_enable_mask))
 		return -1;
 
 	/* prepare VSET value for LDOVBB mux register */
-	vset &= OMAP5_ABB_FUSE_VSET_MASK;
-	vset >>= ffs(OMAP5_ABB_FUSE_VSET_MASK) - 1;
+	vset &= fuse_vset_mask;
+	vset >>= ffs(fuse_vset_mask) - 1;
 	vset <<= ffs(OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK) - 1;
 	vset |= OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK;
 
diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
index 5268a1f..ad97132 100644
--- a/arch/arm/cpu/armv7/omap5/hw_data.c
+++ b/arch/arm/cpu/armv7/omap5/hw_data.c
@@ -486,94 +486,6 @@ void enable_basic_uboot_clocks(void)
 			 1);
 }
 
-/*
- * Enable non-essential clock domains, modules and
- * do some additional special settings needed
- */
-void enable_non_essential_clocks(void)
-{
-	u32 const clk_domains_non_essential[] = {
-		(*prcm)->cm_mpu_m3_clkstctrl,
-		(*prcm)->cm_ivahd_clkstctrl,
-		(*prcm)->cm_dsp_clkstctrl,
-		(*prcm)->cm_dss_clkstctrl,
-		(*prcm)->cm_sgx_clkstctrl,
-		(*prcm)->cm1_abe_clkstctrl,
-		(*prcm)->cm_c2c_clkstctrl,
-		(*prcm)->cm_cam_clkstctrl,
-		(*prcm)->cm_dss_clkstctrl,
-		(*prcm)->cm_sdma_clkstctrl,
-		0
-	};
-
-	u32 const clk_modules_hw_auto_non_essential[] = {
-		(*prcm)->cm_mpu_m3_mpu_m3_clkctrl,
-		(*prcm)->cm_ivahd_ivahd_clkctrl,
-		(*prcm)->cm_ivahd_sl2_clkctrl,
-		(*prcm)->cm_dsp_dsp_clkctrl,
-		(*prcm)->cm_l3instr_l3_3_clkctrl,
-		(*prcm)->cm_l3instr_l3_instr_clkctrl,
-		(*prcm)->cm_l3instr_intrconn_wp1_clkctrl,
-		(*prcm)->cm_l3init_hsi_clkctrl,
-		(*prcm)->cm_l4per_hdq1w_clkctrl,
-		0
-	};
-
-	u32 const clk_modules_explicit_en_non_essential[] = {
-		(*prcm)->cm1_abe_aess_clkctrl,
-		(*prcm)->cm1_abe_pdm_clkctrl,
-		(*prcm)->cm1_abe_dmic_clkctrl,
-		(*prcm)->cm1_abe_mcasp_clkctrl,
-		(*prcm)->cm1_abe_mcbsp1_clkctrl,
-		(*prcm)->cm1_abe_mcbsp2_clkctrl,
-		(*prcm)->cm1_abe_mcbsp3_clkctrl,
-		(*prcm)->cm1_abe_slimbus_clkctrl,
-		(*prcm)->cm1_abe_timer5_clkctrl,
-		(*prcm)->cm1_abe_timer6_clkctrl,
-		(*prcm)->cm1_abe_timer7_clkctrl,
-		(*prcm)->cm1_abe_timer8_clkctrl,
-		(*prcm)->cm1_abe_wdt3_clkctrl,
-		(*prcm)->cm_l4per_gptimer9_clkctrl,
-		(*prcm)->cm_l4per_gptimer10_clkctrl,
-		(*prcm)->cm_l4per_gptimer11_clkctrl,
-		(*prcm)->cm_l4per_gptimer3_clkctrl,
-		(*prcm)->cm_l4per_gptimer4_clkctrl,
-		(*prcm)->cm_l4per_mcspi2_clkctrl,
-		(*prcm)->cm_l4per_mcspi3_clkctrl,
-		(*prcm)->cm_l4per_mcspi4_clkctrl,
-		(*prcm)->cm_l4per_mmcsd3_clkctrl,
-		(*prcm)->cm_l4per_mmcsd4_clkctrl,
-		(*prcm)->cm_l4per_mmcsd5_clkctrl,
-		(*prcm)->cm_l4per_uart1_clkctrl,
-		(*prcm)->cm_l4per_uart2_clkctrl,
-		(*prcm)->cm_l4per_uart4_clkctrl,
-		(*prcm)->cm_wkup_keyboard_clkctrl,
-		(*prcm)->cm_wkup_wdtimer2_clkctrl,
-		(*prcm)->cm_cam_iss_clkctrl,
-		(*prcm)->cm_cam_fdif_clkctrl,
-		(*prcm)->cm_dss_dss_clkctrl,
-		(*prcm)->cm_sgx_sgx_clkctrl,
-		0
-	};
-
-	/* Enable optional functional clock for ISS */
-	setbits_le32((*prcm)->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK);
-
-	/* Enable all optional functional clocks of DSS */
-	setbits_le32((*prcm)->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK);
-
-	do_enable_clocks(clk_domains_non_essential,
-			 clk_modules_hw_auto_non_essential,
-			 clk_modules_explicit_en_non_essential,
-			 0);
-
-	/* Put camera module in no sleep mode */
-	clrsetbits_le32((*prcm)->cm_cam_clkstctrl,
-			MODULE_CLKCTRL_MODULEMODE_MASK,
-			CD_CLKCTRL_CLKTRCTRL_NO_SLEEP <<
-			MODULE_CLKCTRL_MODULEMODE_SHIFT);
-}
-
 const struct ctrl_ioregs ioregs_omap5430 = {
 	.ctrl_ddrch = DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
 	.ctrl_lpddr2ch = DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN,
@@ -639,6 +551,7 @@ void hw_data_init(void)
 	break;
 
 	case DRA752_ES1_0:
+	case DRA752_ES1_1:
 	*prcm = &dra7xx_prcm;
 	*dplls_data = &dra7xx_dplls;
 	*omap_vcores = &dra752_volts;
@@ -666,6 +579,7 @@ void get_ioregs(const struct ctrl_ioregs **regs)
 		*regs = &ioregs_omap5432_es2;
 		break;
 	case DRA752_ES1_0:
+	case DRA752_ES1_1:
 		*regs = &ioregs_dra7xx_es1;
 		break;
 
diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c
index 5386ae0..737d23c 100644
--- a/arch/arm/cpu/armv7/omap5/hwinit.c
+++ b/arch/arm/cpu/armv7/omap5/hwinit.c
@@ -333,6 +333,9 @@ void init_omap_revision(void)
 	case DRA752_CONTROL_ID_CODE_ES1_0:
 		*omap_si_rev = DRA752_ES1_0;
 		break;
+	case DRA752_CONTROL_ID_CODE_ES1_1:
+		*omap_si_rev = DRA752_ES1_1;
+		break;
 	default:
 		*omap_si_rev = OMAP5430_SILICON_ID_INVALID;
 	}
diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c
index 77c428b..ff32807 100644
--- a/arch/arm/cpu/armv7/omap5/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c
@@ -432,11 +432,13 @@ struct omap_sys_ctrl_regs const dra7xx_ctrl = {
 	.control_srcomp_code_latch		= 0x4A002E84,
 	.control_ddr_control_ext_0		= 0x4A002E88,
 	.control_padconf_core_base		= 0x4A003400,
+	.control_std_fuse_opp_vdd_mpu_2		= 0x4A003B24,
 	.control_port_emif1_sdram_config	= 0x4AE0C110,
 	.control_port_emif1_lpddr2_nvm_config	= 0x4AE0C114,
 	.control_port_emif2_sdram_config	= 0x4AE0C118,
 	.control_emif1_sdram_config_ext		= 0x4AE0C144,
 	.control_emif2_sdram_config_ext		= 0x4AE0C148,
+	.control_wkup_ldovbb_mpu_voltage_ctrl	= 0x4AE0C158,
 	.control_padconf_mode			= 0x4AE0C5A0,
 	.control_xtal_oscillator		= 0x4AE0C5A4,
 	.control_i2c_2				= 0x4AE0C5A8,
@@ -807,6 +809,9 @@ struct prcm_regs const dra7xx_prcm = {
 	.cm_dsp_clkstctrl			= 0x4a005400,
 	.cm_dsp_dsp_clkctrl			= 0x4a005420,
 
+	/* prm irqstatus regs */
+	.prm_irqstatus_mpu_2			= 0x4ae06014,
+
 	/* cm2.ckgen */
 	.cm_clksel_usb_60mhz			= 0x4a008104,
 	.cm_clkmode_dpll_per			= 0x4a008140,
@@ -967,4 +972,7 @@ struct prcm_regs const dra7xx_prcm = {
 	.prm_vc_val_bypass			= 0x4ae07da0,
 	.prm_vc_cfg_i2c_mode			= 0x4ae07db4,
 	.prm_vc_cfg_i2c_clk			= 0x4ae07db8,
+
+	.prm_abbldo_mpu_setup			= 0x4AE07DDC,
+	.prm_abbldo_mpu_ctrl			= 0x4AE07DE0,
 };
diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c
index 2e18706..16a91f9 100644
--- a/arch/arm/cpu/armv7/omap5/sdram.c
+++ b/arch/arm/cpu/armv7/omap5/sdram.c
@@ -245,6 +245,7 @@ static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs)
 		*regs = &emif_regs_ddr3_532_mhz_1cs_es2;
 		break;
 	case DRA752_ES1_0:
+	case DRA752_ES1_1:
 		switch (emif_nr) {
 		case 1:
 			*regs = &emif_1_regs_ddr3_532_mhz_1cs_dra_es1;
@@ -273,6 +274,7 @@ static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs
 		*dmm_lisa_regs = &lisa_map_4G_x_2_x_2;
 		break;
 	case DRA752_ES1_0:
+	case DRA752_ES1_1:
 	default:
 		*dmm_lisa_regs = &lisa_map_2G_x_2_x_2_2G_x_1_x_2;
 	}
@@ -460,6 +462,7 @@ static void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr,
 		*size = ARRAY_SIZE(ddr3_ext_phy_ctrl_const_base_es2);
 		break;
 	case DRA752_ES1_0:
+	case DRA752_ES1_1:
 		if (emif_nr == 1) {
 			*regs = dra_ddr3_ext_phy_ctrl_const_base_es1_emif1;
 			*size =
@@ -626,6 +629,7 @@ const struct read_write_regs *get_bug_regs(u32 *iterations)
 			     sizeof(omap5_bug_00339_regs[0]);
 		break;
 	case DRA752_ES1_0:
+	case DRA752_ES1_1:
 		bug_00339_regs_ptr = dra_bug_00339_regs;
 		*iterations = sizeof(dra_bug_00339_regs)/
 			     sizeof(dra_bug_00339_regs[0]);
diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
index c1777df..fbe599d 100644
--- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h
+++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
@@ -43,7 +43,7 @@
 #define MT47H128M16RT25E_IOCTRL_VALUE		0x18B
 
 /* Micron MT41J128M16JT-125 */
-#define MT41J128MJT125_EMIF_READ_LATENCY	0x06
+#define MT41J128MJT125_EMIF_READ_LATENCY	0x100006
 #define MT41J128MJT125_EMIF_TIM1		0x0888A39B
 #define MT41J128MJT125_EMIF_TIM2		0x26337FDA
 #define MT41J128MJT125_EMIF_TIM3		0x501F830F
@@ -65,7 +65,7 @@
 #define MT41J256MJT125_EMIF_SDCFG		0x61C04B32
 
 /* Micron MT41J256M8HX-15E */
-#define MT41J256M8HX15E_EMIF_READ_LATENCY	0x06
+#define MT41J256M8HX15E_EMIF_READ_LATENCY	0x100006
 #define MT41J256M8HX15E_EMIF_TIM1		0x0888A39B
 #define MT41J256M8HX15E_EMIF_TIM2		0x26337FDA
 #define MT41J256M8HX15E_EMIF_TIM3		0x501F830F
@@ -97,7 +97,7 @@
 #define MT41K256M16HA125E_IOCTRL_VALUE		0x18B
 
 /* Micron MT41J512M8RH-125 on EVM v1.5 */
-#define MT41J512M8RH125_EMIF_READ_LATENCY	0x06
+#define MT41J512M8RH125_EMIF_READ_LATENCY	0x100006
 #define MT41J512M8RH125_EMIF_TIM1		0x0888A39B
 #define MT41J512M8RH125_EMIF_TIM2		0x26517FDA
 #define MT41J512M8RH125_EMIF_TIM3		0x501F84EF
@@ -113,7 +113,7 @@
 #define MT41J512M8RH125_IOCTRL_VALUE		0x18B
 
 /* Samsung K4B2G1646E-BIH9 */
-#define K4B2G1646EBIH9_EMIF_READ_LATENCY	0x07
+#define K4B2G1646EBIH9_EMIF_READ_LATENCY	0x100007
 #define K4B2G1646EBIH9_EMIF_TIM1		0x0AAAE51B
 #define K4B2G1646EBIH9_EMIF_TIM2		0x2A1D7FDA
 #define K4B2G1646EBIH9_EMIF_TIM3		0x501F83FF
diff --git a/arch/arm/include/asm/arch-omap3/omap3.h b/arch/arm/include/asm/arch-omap3/omap3.h
index 65a5995..194b93b 100644
--- a/arch/arm/include/asm/arch-omap3/omap3.h
+++ b/arch/arm/include/asm/arch-omap3/omap3.h
@@ -140,13 +140,13 @@ struct gpio {
 					 SRAM_OFFSET2)
 #define SRAM_CLK_CODE			(SRAM_VECT_CODE + 64)
 
-#define OMAP3_PUBLIC_SRAM_BASE		0x40208000 /* Works for GP & EMU */
-#define OMAP3_PUBLIC_SRAM_END		0x40210000
+#define NON_SECURE_SRAM_START		0x40208000 /* Works for GP & EMU */
+#define NON_SECURE_SRAM_END		0x40210000
 
 #define LOW_LEVEL_SRAM_STACK		0x4020FFFC
 
 /* scratch area - accessible on both EMU and GP */
-#define OMAP3_PUBLIC_SRAM_SCRATCH_AREA	OMAP3_PUBLIC_SRAM_BASE
+#define OMAP3_PUBLIC_SRAM_SCRATCH_AREA	NON_SECURE_SRAM_START
 
 #define DEBUG_LED1			149	/* gpio */
 #define DEBUG_LED2			150	/* gpio */
diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h
index ce8217f..fc94725 100644
--- a/arch/arm/include/asm/arch-omap4/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap4/sys_proto.h
@@ -30,7 +30,6 @@ void watchdog_init(void);
 u32 get_device_type(void);
 void do_set_mux(u32 base, struct pad_conf_entry const *array, int size);
 void set_muxconf_regs_essential(void);
-void set_muxconf_regs_non_essential(void);
 void sr32(void *, u32, u32, u32);
 u32 wait_on_value(u32, u32, void *, u32);
 void sdelay(unsigned long);
diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h
index 590235b..19fdece 100644
--- a/arch/arm/include/asm/arch-omap5/omap.h
+++ b/arch/arm/include/asm/arch-omap5/omap.h
@@ -44,6 +44,7 @@
 #define OMAP5432_CONTROL_ID_CODE_ES1_0		0x0B99802F
 #define OMAP5432_CONTROL_ID_CODE_ES2_0          0x1B99802F
 #define DRA752_CONTROL_ID_CODE_ES1_0		0x0B99002F
+#define DRA752_CONTROL_ID_CODE_ES1_1		0x1B99002F
 
 /* UART */
 #define UART1_BASE		(OMAP54XX_L4_PER_BASE + 0x6a000)
@@ -204,6 +205,8 @@ struct s32ktimer {
 /* ABB efuse masks */
 #define OMAP5_ABB_FUSE_VSET_MASK		(0x1F << 24)
 #define OMAP5_ABB_FUSE_ENABLE_MASK		(0x1 << 29)
+#define DRA7_ABB_FUSE_VSET_MASK			(0x1F << 20)
+#define DRA7_ABB_FUSE_ENABLE_MASK		(0x1 << 25)
 #define OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK	(0x1 << 10)
 #define OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK	(0x1f << 0)
 
diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h
index 9e70d48..43011a4 100644
--- a/arch/arm/include/asm/arch-omap5/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap5/sys_proto.h
@@ -31,7 +31,6 @@ void watchdog_init(void);
 u32 get_device_type(void);
 void do_set_mux(u32 base, struct pad_conf_entry const *array, int size);
 void set_muxconf_regs_essential(void);
-void set_muxconf_regs_non_essential(void);
 void sr32(void *, u32, u32, u32);
 u32 wait_on_value(u32, u32, void *, u32);
 void sdelay(unsigned long);
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index a78f990..04925bc 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -567,7 +567,6 @@ u32 omap_ddr_clk(void);
 u32 get_sys_clk_index(void);
 void enable_basic_clocks(void);
 void enable_basic_uboot_clocks(void);
-void enable_non_essential_clocks(void);
 void scale_vcores(struct vcores_data const *);
 u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic);
 void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic);
@@ -643,6 +642,7 @@ static inline u8 is_dra7xx(void)
 
 /* DRA7XX */
 #define DRA752_ES1_0	0x07520100
+#define DRA752_ES1_1	0x07520110
 
 /*
  * SRAM scratch space entries
diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c
index ed87cd9..4e6846a 100644
--- a/board/ti/am43xx/board.c
+++ b/board/ti/am43xx/board.c
@@ -188,7 +188,7 @@ const struct ctrl_ioregs ioregs_ddr3 = {
 	.dt1ioctl		= DDR3_DATA0_IOCTRL_VALUE,
 	.dt2ioctrl		= DDR3_DATA0_IOCTRL_VALUE,
 	.dt3ioctrl		= DDR3_DATA0_IOCTRL_VALUE,
-	.emif_sdram_config_ext	= 0x0043,
+	.emif_sdram_config_ext	= 0x0143,
 };
 
 const struct emif_regs ddr3_emif_regs_400Mhz = {
diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c
index af854da..b549d72 100644
--- a/board/ti/omap5_uevm/evm.c
+++ b/board/ti/omap5_uevm/evm.c
@@ -157,19 +157,6 @@ void set_muxconf_regs_essential(void)
 		   sizeof(struct pad_conf_entry));
 }
 
-void set_muxconf_regs_non_essential(void)
-{
-	do_set_mux((*ctrl)->control_padconf_core_base,
-		   core_padconf_array_non_essential,
-		   sizeof(core_padconf_array_non_essential) /
-		   sizeof(struct pad_conf_entry));
-
-	do_set_mux((*ctrl)->control_padconf_wkup_base,
-		   wkup_padconf_array_non_essential,
-		   sizeof(wkup_padconf_array_non_essential) /
-		   sizeof(struct pad_conf_entry));
-}
-
 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
 int board_mmc_init(bd_t *bis)
 {
diff --git a/board/ti/omap5_uevm/mux_data.h b/board/ti/omap5_uevm/mux_data.h
index 31ce363..de7ce9f 100644
--- a/board/ti/omap5_uevm/mux_data.h
+++ b/board/ti/omap5_uevm/mux_data.h
@@ -55,238 +55,4 @@ const struct pad_conf_entry wkup_padconf_array_essential[] = {
 
 };
 
-const struct pad_conf_entry core_padconf_array_non_essential[] = {
-
-	{C2C_DATAIN0, (IEN | M0)},    /*  C2C_DATAIN0   */
-	{C2C_DATAIN1, (IEN | M0)},    /*  C2C_DATAIN1   */
-	{C2C_DATAIN2, (IEN | M0)},    /*  C2C_DATAIN2   */
-	{C2C_DATAIN3, (IEN | M0)},    /*  C2C_DATAIN3   */
-	{C2C_DATAIN4, (IEN | M0)},    /*  C2C_DATAIN4   */
-	{C2C_DATAIN5, (IEN | M0)},    /*  C2C_DATAIN5   */
-	{C2C_DATAIN6, (IEN | M0)},    /*  C2C_DATAIN6   */
-	{C2C_DATAIN7, (IEN | M0)},    /*  C2C_DATAIN7   */
-	{C2C_CLKIN1,  (IEN | M0)},    /*  C2C_CLKIN1    */
-	{C2C_CLKIN0,  (IEN | M0)},    /*  C2C_CLKIN0    */
-	{C2C_CLKOUT0, (M0)},    /*  C2C_CLKOUT0   */
-	{C2C_CLKOUT1, (M0)},    /*  C2C_CLKOUT1   */
-	{C2C_DATAOUT0, (M0)},    /*  C2C_DATAOUT0  */
-	{C2C_DATAOUT1, (M0)},    /*  C2C_DATAOUT1  */
-	{C2C_DATAOUT2, (M0)},    /*  C2C_DATAOUT2  */
-	{C2C_DATAOUT3, (M0)},    /*  C2C_DATAOUT3  */
-	{C2C_DATAOUT4, (M0)},    /*  C2C_DATAOUT4  */
-	{C2C_DATAOUT5, (M0)},    /*  C2C_DATAOUT5  */
-	{C2C_DATAOUT6, (M0)},    /*  C2C_DATAOUT6  */
-	{C2C_DATAOUT7, (M0)},    /*  C2C_DATAOUT7  */
-	{C2C_DATA8, (IEN | M0)},    /*  C2C_DATA8     */
-	{C2C_DATA9, (IEN | M0)},    /*  C2C_DATA9     */
-	{C2C_DATA10, (IEN | M0)},    /*  C2C_DATA10    */
-	{C2C_DATA11, (IEN | M0)},    /*  C2C_DATA11    */
-	{C2C_DATA12, (IEN | M0)},    /*  C2C_DATA12    */
-	{C2C_DATA13, (IEN | M0)},    /*  C2C_DATA13    */
-	{C2C_DATA14, (IEN | M0)},    /*  C2C_DATA14    */
-	{C2C_DATA15, (IEN | M0)},    /*  C2C_DATA15    */
-	{LLIB_WAKEREQOUT, (PTU | IEN | M6)},    /*  GPIO2_32      */
-	{LLIA_WAKEREQOUT, (M1)},    /*  C2C_WAKEREQOUT */
-	{HSI1_ACREADY, (PTD | M6)},    /*  GPIO3_64  */
-	{HSI1_CAREADY, (PTD | M6)},    /*  GPIO3_65  */
-	{HSI1_ACWAKE,  (PTD | IEN | M6)},    /*  GPIO3_66  */
-	{HSI1_CAWAKE,  (PTU | IEN | M6)},    /*  GPIO3_67  */
-	{HSI1_ACFLAG,  (PTD | IEN | M6)},    /*  GPIO3_68  */
-	{HSI1_ACDATA,  (PTD | M6)},    /*  GPIO3_69  */
-	{HSI1_CAFLAG,  (M6)},    /*  GPIO3_70  */
-	{HSI1_CADATA,  (M6)},    /*  GPIO3_71  */
-	{UART1_TX, (M0)},    /*  UART1_TX  */
-	{UART1_CTS, (PTU | IEN | M0)},    /*  UART1_CTS */
-	{UART1_RX, (PTU | IEN | M0)},    /*  UART1_RX  */
-	{UART1_RTS, (M0)},    /*  UART1_RTS */
-	{HSI2_CAREADY, (IEN | M0)},    /*  HSI2_CAREADY */
-	{HSI2_ACREADY, (OFF_EN | M0)},    /*  HSI2_ACREADY */
-	{HSI2_CAWAKE, (IEN | PTD | M0)},    /*  HSI2_CAWAKE  */
-	{HSI2_ACWAKE, (M0)},    /*  HSI2_ACWAKE  */
-	{HSI2_CAFLAG, (IEN | PTD | M0)},    /*  HSI2_CAFLAG  */
-	{HSI2_CADATA, (IEN | PTD | M0)},    /*  HSI2_CADATA  */
-	{HSI2_ACFLAG, (M0)},    /*  HSI2_ACFLAG  */
-	{HSI2_ACDATA, (M0)},    /*  HSI2_ACDATA  */
-	{UART2_RTS, (IEN | M1)},    /*  MCSPI3_SOMI  */
-	{UART2_CTS, (IEN | M1)},    /*  MCSPI3_CS0   */
-	{UART2_RX, (IEN | M1)},    /*  MCSPI3_SIMO  */
-	{UART2_TX, (IEN | M1)},    /*  MCSPI3_CLK   */
-	{TIMER10_PWM_EVT, (IEN | M0)},    /*  TIMER10_PWM_EVT  */
-	{DSIPORTA_TE0, (IEN | M0)},    /*  DSIPORTA_TE0     */
-	{DSIPORTA_LANE0X, (IEN | M0)},    /*  DSIPORTA_LANE0X  */
-	{DSIPORTA_LANE0Y, (IEN | M0)},    /*  DSIPORTA_LANE0Y  */
-	{DSIPORTA_LANE1X, (IEN | M0)},    /*  DSIPORTA_LANE1X  */
-	{DSIPORTA_LANE1Y, (IEN | M0)},    /*  DSIPORTA_LANE1Y  */
-	{DSIPORTA_LANE2X, (IEN | M0)},    /*  DSIPORTA_LANE2X  */
-	{DSIPORTA_LANE2Y, (IEN | M0)},    /*  DSIPORTA_LANE2Y  */
-	{DSIPORTA_LANE3X, (IEN | M0)},    /*  DSIPORTA_LANE3X  */
-	{DSIPORTA_LANE3Y, (IEN | M0)},    /*  DSIPORTA_LANE3Y  */
-	{DSIPORTA_LANE4X, (IEN | M0)},    /*  DSIPORTA_LANE4X  */
-	{DSIPORTA_LANE4Y, (IEN | M0)},    /*  DSIPORTA_LANE4Y  */
-	{TIMER9_PWM_EVT, (IEN | M0)},    /*  TIMER9_PWM_EVT   */
-	{DSIPORTC_TE0, (IEN | M0)},    /*  DSIPORTC_TE0     */
-	{DSIPORTC_LANE0X, (IEN | M0)},    /*  DSIPORTC_LANE0X  */
-	{DSIPORTC_LANE0Y, (IEN | M0)},    /*  DSIPORTC_LANE0Y  */
-	{DSIPORTC_LANE1X, (IEN | M0)},    /*  DSIPORTC_LANE1X  */
-	{DSIPORTC_LANE1Y, (IEN | M0)},    /*  DSIPORTC_LANE1Y  */
-	{DSIPORTC_LANE2X, (IEN | M0)},    /*  DSIPORTC_LANE2X  */
-	{DSIPORTC_LANE2Y, (IEN | M0)},    /*  DSIPORTC_LANE2Y  */
-	{DSIPORTC_LANE3X, (IEN | M0)},    /*  DSIPORTC_LANE3X  */
-	{DSIPORTC_LANE3Y, (IEN | M0)},    /*  DSIPORTC_LANE3Y  */
-	{DSIPORTC_LANE4X, (IEN | M0)},    /*  DSIPORTC_LANE4X  */
-	{DSIPORTC_LANE4Y, (IEN | M0)},    /*  DSIPORTC_LANE4Y  */
-	{RFBI_HSYNC0, (M4)},    /*  KBD_COL5   */
-	{RFBI_TE_VSYNC0, (PTD | M6)},    /*  GPIO6_161  */
-	{RFBI_RE, (M4)},    /*  KBD_COL4   */
-	{RFBI_A0, (PTD | IEN | M6)},    /*  GPIO6_165  */
-	{RFBI_DATA8, (M4)},    /*  KBD_COL3   */
-	{RFBI_DATA9, (PTD | M6)},    /*  GPIO6_175  */
-	{RFBI_DATA10, (PTD | M6)},    /*  GPIO6_176  */
-	{RFBI_DATA11, (PTD | M6)},    /*  GPIO6_177  */
-	{RFBI_DATA12, (PTD | M6)},    /*  GPIO6_178  */
-	{RFBI_DATA13, (PTU | IEN | M6)},    /*  GPIO6_179  */
-	{RFBI_DATA14, (M4)},    /*  KBD_COL7   */
-	{RFBI_DATA15, (M4)},    /*  KBD_COL6   */
-	{GPIO6_182, (M6)},    /*  GPIO6_182  */
-	{GPIO6_183, (PTD | M6)},    /*  GPIO6_183  */
-	{GPIO6_184, (M4)},    /*  KBD_COL2   */
-	{GPIO6_185, (PTD | IEN | M6)},    /*  GPIO6_185  */
-	{GPIO6_186, (PTD | M6)},    /*  GPIO6_186  */
-	{GPIO6_187, (PTU | IEN | M4)},    /*  KBD_ROW2   */
-	{RFBI_DATA0, (PTD | M6)},    /*  GPIO6_166  */
-	{RFBI_DATA1, (PTD | M6)},    /*  GPIO6_167  */
-	{RFBI_DATA2, (PTD | M6)},    /*  GPIO6_168  */
-	{RFBI_DATA3, (PTD | IEN | M6)},    /*  GPIO6_169  */
-	{RFBI_DATA4, (IEN | M6)},    /*  GPIO6_170  */
-	{RFBI_DATA5, (IEN | M6)},    /*  GPIO6_171  */
-	{RFBI_DATA6, (PTD | M6)},    /*  GPIO6_172  */
-	{RFBI_DATA7, (PTD | M6)},    /*  GPIO6_173  */
-	{RFBI_CS0, (PTD | IEN | M6)},    /*  GPIO6_163  */
-	{RFBI_WE, (PTD | M6)},    /*  GPIO6_162  */
-	{MCSPI2_CS0, (M0)},    /*  MCSPI2_CS0 */
-	{MCSPI2_CLK, (IEN | M0)},    /*  MCSPI2_CLK */
-	{MCSPI2_SIMO, (IEN | M0)},    /*  MCSPI2_SIMO*/
-	{MCSPI2_SOMI, (PTU | IEN | M0)},    /*  MCSPI2_SOMI*/
-	{I2C4_SCL, (IEN | M0)},    /*  I2C4_SCL   */
-	{I2C4_SDA, (IEN | M0)},    /*  I2C4_SDA   */
-	{HDMI_CEC, (IEN | M0)},    /*  HDMI_CEC   */
-	{HDMI_HPD, (PTD | IEN | M0)},    /*  HDMI_HPD   */
-	{HDMI_DDC_SCL, (IEN | M0)},    /*  HDMI_DDC_SCL */
-	{HDMI_DDC_SDA, (IEN | M0)},    /*  HDMI_DDC_SDA */
-	{CSIPORTA_LANE0X, (IEN | M0)},    /*  CSIPORTA_LANE0X  */
-	{CSIPORTA_LANE0Y, (IEN | M0)},    /*  CSIPORTA_LANE0Y  */
-	{CSIPORTA_LANE1Y, (IEN | M0)},    /*  CSIPORTA_LANE1Y  */
-	{CSIPORTA_LANE1X, (IEN | M0)},    /*  CSIPORTA_LANE1X  */
-	{CSIPORTA_LANE2Y, (IEN | M0)},    /*  CSIPORTA_LANE2Y  */
-	{CSIPORTA_LANE2X, (IEN | M0)},    /*  CSIPORTA_LANE2X  */
-	{CSIPORTA_LANE3X, (IEN | M0)},    /*  CSIPORTA_LANE3X  */
-	{CSIPORTA_LANE3Y, (IEN | M0)},    /*  CSIPORTA_LANE3Y  */
-	{CSIPORTA_LANE4X, (IEN | M0)},    /*  CSIPORTA_LANE4X  */
-	{CSIPORTA_LANE4Y, (IEN | M0)},    /*  CSIPORTA_LANE4Y  */
-	{CSIPORTB_LANE0X, (IEN | M0)},    /*  CSIPORTB_LANE0X  */
-	{CSIPORTB_LANE0Y, (IEN | M0)},    /*  CSIPORTB_LANE0Y  */
-	{CSIPORTB_LANE1Y, (IEN | M0)},    /*  CSIPORTB_LANE1Y  */
-	{CSIPORTB_LANE1X, (IEN | M0)},    /*  CSIPORTB_LANE1X  */
-	{CSIPORTB_LANE2Y, (IEN | M0)},    /*  CSIPORTB_LANE2Y  */
-	{CSIPORTB_LANE2X, (IEN | M0)},    /*  CSIPORTB_LANE2X  */
-	{CSIPORTC_LANE0Y, (IEN | M0)},    /*  CSIPORTC_LANE0Y  */
-	{CSIPORTC_LANE0X, (IEN | M0)},    /*  CSIPORTC_LANE0X  */
-	{CSIPORTC_LANE1Y, (IEN | M0)},    /*  CSIPORTC_LANE1Y  */
-	{CSIPORTC_LANE1X, (IEN | M0)},    /*  CSIPORTC_LANE1X  */
-	{CAM_SHUTTER, (M0)},    /*  CAM_SHUTTER      */
-	{CAM_STROBE, (M0)},    /*  CAM_STROBE       */
-	{CAM_GLOBALRESET, (IEN | M0)},    /*  CAM_GLOBALRESET  */
-	{TIMER11_PWM_EVT, (PTD | M6)},    /*  GPIO8_227  */
-	{TIMER5_PWM_EVT, (PTD | M6)},    /*  GPIO8_228  */
-	{TIMER6_PWM_EVT, (PTD | M6)},    /*  GPIO8_229  */
-	{TIMER8_PWM_EVT,      (PTU | M6)},    /*  GPIO8_230  */
-	{I2C3_SCL, (IEN | M0)},    /*  I2C3_SCL   */
-	{I2C3_SDA, (IEN | M0)},    /*  I2C3_SDA   */
-	{GPIO8_233, (IEN | M2)},    /*  TIMER8_PWM_EVT   */
-	{ABE_CLKS, (IEN | M0)},    /*  ABE_CLKS  */
-	{ABEDMIC_DIN1, (IEN | M0)},    /*  ABEDMIC_DIN1 */
-	{ABEDMIC_DIN2, (IEN | M0)},    /*  ABEDMIC_DIN2 */
-	{ABEDMIC_DIN3, (IEN | M0)},    /*  ABEDMIC_DIN3 */
-	{ABEDMIC_CLK1, (M0)},    /*  ABEDMIC_CLK1 */
-	{ABEDMIC_CLK2, (IEN | M1)},    /*  ABEMCBSP1_FSX */
-	{ABEDMIC_CLK3, (M1)},    /*  ABEMCBSP1_DX  */
-	{ABESLIMBUS1_CLOCK, (IEN | M1)},    /*  ABEMCBSP1_CLKX   */
-	{ABESLIMBUS1_DATA, (IEN | M1)},    /*  ABEMCBSP1_DR */
-	{ABEMCBSP2_DR, (IEN | M0)},    /*  ABEMCBSP2_DR */
-	{ABEMCBSP2_DX, (M0)},    /*  ABEMCBSP2_DX */
-	{ABEMCBSP2_FSX, (IEN | M0)},    /*  ABEMCBSP2_FSX  */
-	{ABEMCBSP2_CLKX, (IEN | M0)},    /*  ABEMCBSP2_CLKX */
-	{ABEMCPDM_UL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},    /*  ABEMCPDM_UL_DATA */
-	{ABEMCPDM_DL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},    /*  ABEMCPDM_DL_DATA */
-	{ABEMCPDM_FRAME, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},    /*  ABEMCPDM_FRAME   */
-	{ABEMCPDM_LB_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},    /*  ABEMCPDM_LB_CLK  */
-	{WLSDIO_CLK, (PTU | IEN | M0)},    /*  WLSDIO_CLK  */
-	{WLSDIO_CMD, (PTU | IEN | M0)},    /*  WLSDIO_CMD  */
-	{WLSDIO_DATA0, (PTU | IEN | M0)},    /*  WLSDIO_DATA0*/
-	{WLSDIO_DATA1, (PTU | IEN | M0)},    /*  WLSDIO_DATA1*/
-	{WLSDIO_DATA2, (PTU | IEN | M0)},    /*  WLSDIO_DATA2*/
-	{WLSDIO_DATA3, (PTU | IEN | M0)},    /*  WLSDIO_DATA3*/
-	{UART5_RX, (PTU | IEN | M0)},    /*  UART5_RX    */
-	{UART5_TX, (M0)},    /*  UART5_TX    */
-	{UART5_CTS, (PTU | IEN | M0)},    /*  UART5_CTS   */
-	{UART5_RTS, (M0)},    /*  UART5_RTS   */
-	{I2C2_SCL, (IEN | M0)},    /*  I2C2_SCL    */
-	{I2C2_SDA, (IEN | M0)},    /*  I2C2_SDA    */
-	{MCSPI1_CLK, (M6)},    /*  GPIO5_140   */
-	{MCSPI1_SOMI, (IEN | M6)},    /*  GPIO5_141   */
-	{MCSPI1_SIMO, (PTD | M6)},    /*  GPIO5_142   */
-	{MCSPI1_CS0, (PTD | M6)},    /*  GPIO5_143   */
-	{MCSPI1_CS1, (PTD | IEN | M6)},    /*  GPIO5_144   */
-	{I2C5_SCL, (IEN | M0)},    /*  I2C5_SCL    */
-	{I2C5_SDA, (IEN | M0)},    /*  I2C5_SDA    */
-	{PERSLIMBUS2_CLOCK, (PTD | M6)},    /*  GPIO5_145   */
-	{PERSLIMBUS2_DATA, (PTD | IEN | M6)},    /*  GPIO5_146   */
-	{UART6_TX, (PTU | IEN | M6)},    /*  GPIO5_149   */
-	{UART6_RX, (PTU | IEN | M6)},    /*  GPIO5_150   */
-	{UART6_CTS, (PTU | IEN | M6)},    /*  GPIO5_151   */
-	{UART6_RTS, (PTU | M0)},    /*  UART6_RTS   */
-	{UART3_CTS_RCTX, (PTU | IEN | M6)},    /*  GPIO5_153   */
-	{UART3_RTS_IRSD, (PTU | IEN | M1)},    /*  HDQ_SIO     */
-	{I2C1_PMIC_SCL, (PTU | IEN | M0)},    /*  I2C1_PMIC_SCL  */
-	{I2C1_PMIC_SDA, (PTU | IEN | M0)},    /*  I2C1_PMIC_SDA  */
-
-};
-
-const struct pad_conf_entry wkup_padconf_array_non_essential[] = {
-
-/*
- * This pad keeps C2C Module always enabled.
- * Putting this in safe mode do not cause the issue.
- * C2C driver could enable this mux setting if needed.
- */
-	{LLIA_WAKEREQIN, (M7)},    /*  SAFE MODE  */
-	{LLIB_WAKEREQIN, (M7)},    /*  SAFE MODE  */
-	{DRM_EMU0, (PTU | IEN | M0)},    /*  DRM_EMU0    */
-	{DRM_EMU1, (PTU | IEN | M0)},    /*  DRM_EMU1    */
-	{JTAG_NTRST, (IEN | M0)},    /*  JTAG_NTRST  */
-	{JTAG_TCK, (IEN | M0)},    /*  JTAG_TCK    */
-	{JTAG_RTCK, (M0)},    /*  JTAG_RTCK   */
-	{JTAG_TMSC, (IEN | M0)},    /*  JTAG_TMSC   */
-	{JTAG_TDI, (IEN | M0)},    /*  JTAG_TDI    */
-	{JTAG_TDO, (M0)},    /*  JTAG_TDO    */
-	{FREF_CLK_IOREQ, (IEN | M0)},    /*  FREF_CLK_IOREQ */
-	{FREF_CLK0_OUT, (M0)},    /*  FREF_CLK0_OUT  */
-	{FREF_CLK1_OUT, (M0)},    /*  FREF_CLK1_OUT  */
-	{FREF_CLK2_OUT, (M0)},    /*  FREF_CLK2_OUT  */
-	{FREF_CLK2_REQ, (PTU | IEN | M6)},    /*  GPIO1_WK9      */
-	{FREF_CLK1_REQ, (PTD | IEN | M6)},    /*  GPIO1_WK8      */
-	{SYS_NRESPWRON, (IEN | M0)},    /*  SYS_NRESPWRON  */
-	{SYS_NRESWARM, (PTU | IEN | M0)},    /*  SYS_NRESWARM   */
-	{SYS_PWR_REQ, (M0)},    /*  SYS_PWR_REQ    */
-	{SYS_NIRQ1, (PTU | IEN | M0)},    /*  SYS_NIRQ1      */
-	{SYS_NIRQ2, (PTU | IEN | M0)},    /*  SYS_NIRQ2      */
-	{SYS_BOOT0, (IEN | M0)},    /*  SYS_BOOT0      */
-	{SYS_BOOT1, (IEN | M0)},    /*  SYS_BOOT1      */
-	{SYS_BOOT2, (IEN | M0)},    /*  SYS_BOOT2      */
-	{SYS_BOOT3, (IEN | M0)},    /*  SYS_BOOT3      */
-	{SYS_BOOT4, (IEN | M0)},    /*  SYS_BOOT4      */
-	{SYS_BOOT5, (IEN | M0)},    /*  SYS_BOOT5      */
-
-};
-
 #endif /* _EVM4430_MUX_DATA_H */
diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c
index cda09a9..5ab6db9 100644
--- a/board/ti/panda/panda.c
+++ b/board/ti/panda/panda.c
@@ -284,36 +284,6 @@ void set_muxconf_regs_essential(void)
 			   sizeof(struct pad_conf_entry));
 }
 
-void set_muxconf_regs_non_essential(void)
-{
-	do_set_mux((*ctrl)->control_padconf_core_base,
-		   core_padconf_array_non_essential,
-		   sizeof(core_padconf_array_non_essential) /
-		   sizeof(struct pad_conf_entry));
-
-	if (omap_revision() < OMAP4460_ES1_0)
-		do_set_mux((*ctrl)->control_padconf_core_base,
-			   core_padconf_array_non_essential_4430,
-			   sizeof(core_padconf_array_non_essential_4430) /
-			   sizeof(struct pad_conf_entry));
-	else
-		do_set_mux((*ctrl)->control_padconf_core_base,
-			   core_padconf_array_non_essential_4460,
-			   sizeof(core_padconf_array_non_essential_4460) /
-			   sizeof(struct pad_conf_entry));
-
-	do_set_mux((*ctrl)->control_padconf_wkup_base,
-		   wkup_padconf_array_non_essential,
-		   sizeof(wkup_padconf_array_non_essential) /
-		   sizeof(struct pad_conf_entry));
-
-	if (omap_revision() < OMAP4460_ES1_0)
-		do_set_mux((*ctrl)->control_padconf_wkup_base,
-			   wkup_padconf_array_non_essential_4430,
-			   sizeof(wkup_padconf_array_non_essential_4430) /
-			   sizeof(struct pad_conf_entry));
-}
-
 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
 int board_mmc_init(bd_t *bis)
 {
diff --git a/board/ti/panda/panda_mux_data.h b/board/ti/panda/panda_mux_data.h
index fb83eac..53c7080 100644
--- a/board/ti/panda/panda_mux_data.h
+++ b/board/ti/panda/panda_mux_data.h
@@ -84,190 +84,4 @@ const struct pad_conf_entry wkup_padconf_array_essential_4460[] = {
 
 };
 
-const struct pad_conf_entry core_padconf_array_non_essential[] = {
-	{GPMC_AD8, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M3)},	/* gpio_32 */
-	{GPMC_AD9, (PTU | IEN | M3)},					/* gpio_33 */
-	{GPMC_AD10, (PTU | IEN | M3)},					/* gpio_34 */
-	{GPMC_AD11, (PTU | IEN | M3)},					/* gpio_35 */
-	{GPMC_AD12, (PTU | IEN | M3)},					/* gpio_36 */
-	{GPMC_AD13, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)},	/* gpio_37 */
-	{GPMC_AD14, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)},	/* gpio_38 */
-	{GPMC_AD15, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)},	/* gpio_39 */
-	{GPMC_A16, (M3)},						/* gpio_40 */
-	{GPMC_A17, (PTD | M3)},						/* gpio_41 */
-	{GPMC_A18, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row6 */
-	{GPMC_A19, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row7 */
-	{GPMC_A20, (IEN | M3)},						/* gpio_44 */
-	{GPMC_A21, (M3)},						/* gpio_45 */
-	{GPMC_A22, (M3)},						/* gpio_46 */
-	{GPMC_A23, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col7 */
-	{GPMC_A24, (PTD | M3)},						/* gpio_48 */
-	{GPMC_A25, (PTD | M3)},						/* gpio_49 */
-	{GPMC_NCS0, (M3)},						/* gpio_50 */
-	{GPMC_NCS1, (IEN | M3)},					/* gpio_51 */
-	{GPMC_NCS2, (IEN | M3)},					/* gpio_52 */
-	{GPMC_NCS3, (IEN | M3)},					/* gpio_53 */
-	{GPMC_NWP, (M3)},						/* gpio_54 */
-	{GPMC_CLK, (PTD | M3)},						/* gpio_55 */
-	{GPMC_NADV_ALE, (M3)},						/* gpio_56 */
-	{GPMC_NBE0_CLE, (M3)},						/* gpio_59 */
-	{GPMC_NBE1, (PTD | M3)},					/* gpio_60 */
-	{GPMC_WAIT0, (PTU | IEN | M3)},					/* gpio_61 */
-	{C2C_DATA11, (PTD | M3)},					/* gpio_100 */
-	{C2C_DATA12, (PTU | IEN | M3)},					/* gpio_101 */
-	{C2C_DATA13, (PTD | M3)},					/* gpio_102 */
-	{C2C_DATA14, (M1)},						/* dsi2_te0 */
-	{C2C_DATA15, (PTD | M3)},					/* gpio_104 */
-	{HDMI_HPD, (M0)},						/* hdmi_hpd */
-	{HDMI_CEC, (M0)},						/* hdmi_cec */
-	{HDMI_DDC_SCL, (PTU | M0)},					/* hdmi_ddc_scl */
-	{HDMI_DDC_SDA, (PTU | IEN | M0)},				/* hdmi_ddc_sda */
-	{CSI21_DX0, (IEN | M0)},					/* csi21_dx0 */
-	{CSI21_DY0, (IEN | M0)},					/* csi21_dy0 */
-	{CSI21_DX1, (IEN | M0)},					/* csi21_dx1 */
-	{CSI21_DY1, (IEN | M0)},					/* csi21_dy1 */
-	{CSI21_DX2, (IEN | M0)},					/* csi21_dx2 */
-	{CSI21_DY2, (IEN | M0)},					/* csi21_dy2 */
-	{CSI21_DX3, (PTD | M7)},					/* csi21_dx3 */
-	{CSI21_DY3, (PTD | M7)},					/* csi21_dy3 */
-	{CSI21_DX4, (PTD | OFF_EN | OFF_PD | OFF_IN | M7)},		/* csi21_dx4 */
-	{CSI21_DY4, (PTD | OFF_EN | OFF_PD | OFF_IN | M7)},		/* csi21_dy4 */
-	{CSI22_DX0, (IEN | M0)},					/* csi22_dx0 */
-	{CSI22_DY0, (IEN | M0)},					/* csi22_dy0 */
-	{CSI22_DX1, (IEN | M0)},					/* csi22_dx1 */
-	{CSI22_DY1, (IEN | M0)},					/* csi22_dy1 */
-	{CAM_SHUTTER, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)},		/* cam_shutter */
-	{CAM_STROBE, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)},		/* cam_strobe */
-	{CAM_GLOBALRESET, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)},	/* gpio_83 */
-	{ABE_MCBSP2_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)},		/* abe_mcbsp2_dr */
-	{ABE_MCBSP2_DX, (OFF_EN | OFF_OUT_PTD | M0)},			/* abe_mcbsp2_dx */
-	{ABE_MCBSP2_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_mcbsp2_fsx */
-	{ABE_MCBSP1_CLKX, (IEN | M0)},					/* abe_mcbsp1_clkx */
-	{ABE_MCBSP1_DR, (IEN | M0)},					/* abe_mcbsp1_dr */
-	{ABE_MCBSP1_DX, (OFF_EN | OFF_OUT_PTD | M0)},			/* abe_mcbsp1_dx */
-	{ABE_MCBSP1_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_mcbsp1_fsx */
-	{ABE_PDM_UL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_pdm_ul_data */
-	{ABE_PDM_DL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_pdm_dl_data */
-	{ABE_PDM_FRAME, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_pdm_frame */
-	{ABE_PDM_LB_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_pdm_lb_clk */
-	{ABE_CLKS, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_clks */
-	{ABE_DMIC_CLK1, (M0)},						/* abe_dmic_clk1 */
-	{ABE_DMIC_DIN1, (IEN | M0)},					/* abe_dmic_din1 */
-	{ABE_DMIC_DIN2, (PTU | IEN | M3)},				/* gpio_121 */
-	{ABE_DMIC_DIN3, (IEN | M0)},					/* abe_dmic_din3 */
-	{UART2_CTS, (PTU | IEN | M7)},					/* uart2_cts */
-	{UART2_RTS, (M7)},						/* uart2_rts */
-	{UART2_RX, (PTU | IEN | M7)},					/* uart2_rx */
-	{UART2_TX, (M7)},						/* uart2_tx */
-	{HDQ_SIO, (M3)},						/* gpio_127 */
-	{MCSPI1_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* mcspi1_clk */
-	{MCSPI1_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* mcspi1_somi */
-	{MCSPI1_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* mcspi1_simo */
-	{MCSPI1_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* mcspi1_cs0 */
-	{MCSPI1_CS1, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)},	/* mcspi1_cs1 */
-	{MCSPI1_CS2, (PTU | OFF_EN | OFF_OUT_PTU | M3)},		/* gpio_139 */
-	{MCSPI1_CS3, (PTU | IEN | M3)},					/* gpio_140 */
-	{SDMMC5_CLK, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M0)},		/* sdmmc5_clk */
-	{SDMMC5_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc5_cmd */
-	{SDMMC5_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc5_dat0 */
-	{SDMMC5_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc5_dat1 */
-	{SDMMC5_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc5_dat2 */
-	{SDMMC5_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc5_dat3 */
-	{MCSPI4_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* mcspi4_clk */
-	{MCSPI4_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* mcspi4_simo */
-	{MCSPI4_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* mcspi4_somi */
-	{MCSPI4_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* mcspi4_cs0 */
-	{UART4_RX, (IEN | M0)},						/* uart4_rx */
-	{UART4_TX, (M0)},						/* uart4_tx */
-	{USBB2_ULPITLL_CLK, (IEN | M3)},				/* gpio_157 */
-	{USBB2_ULPITLL_STP, (IEN | M5)},				/* dispc2_data23 */
-	{USBB2_ULPITLL_DIR, (IEN | M5)},				/* dispc2_data22 */
-	{USBB2_ULPITLL_NXT, (IEN | M5)},				/* dispc2_data21 */
-	{USBB2_ULPITLL_DAT0, (IEN | M5)},				/* dispc2_data20 */
-	{USBB2_ULPITLL_DAT1, (IEN | M5)},				/* dispc2_data19 */
-	{USBB2_ULPITLL_DAT2, (IEN | M5)},				/* dispc2_data18 */
-	{USBB2_ULPITLL_DAT3, (IEN | M5)},				/* dispc2_data15 */
-	{USBB2_ULPITLL_DAT4, (IEN | M5)},				/* dispc2_data14 */
-	{USBB2_ULPITLL_DAT5, (IEN | M5)},				/* dispc2_data13 */
-	{USBB2_ULPITLL_DAT6, (IEN | M5)},				/* dispc2_data12 */
-	{USBB2_ULPITLL_DAT7, (IEN | M5)},				/* dispc2_data11 */
-	{USBB2_HSIC_DATA, (PTD | OFF_EN | OFF_OUT_PTU | M3)},		/* gpio_169 */
-	{USBB2_HSIC_STROBE, (PTD | OFF_EN | OFF_OUT_PTU | M3)},		/* gpio_170 */
-	{UNIPRO_TX0, (PTD | IEN | M3)},					/* gpio_171 */
-	{UNIPRO_TY0, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col1 */
-	{UNIPRO_TX1, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col2 */
-	{UNIPRO_TY1, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col3 */
-	{UNIPRO_TX2, (PTU | IEN | M3)},					/* gpio_0 */
-	{UNIPRO_RX0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row0 */
-	{UNIPRO_RY0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row1 */
-	{UNIPRO_RX1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row2 */
-	{UNIPRO_RY1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row3 */
-	{UNIPRO_RX2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row4 */
-	{UNIPRO_RY2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row5 */
-	{USBA0_OTG_CE, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M0)},	/* usba0_otg_ce */
-	{USBA0_OTG_DP, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* usba0_otg_dp */
-	{USBA0_OTG_DM, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* usba0_otg_dm */
-	{FREF_CLK1_OUT, (M0)},						/* fref_clk1_out */
-	{SYS_NIRQ1, (PTU | IEN | M0)},					/* sys_nirq1 */
-	{SYS_NIRQ2, (PTU | IEN | M0)},					/* sys_nirq2 */
-	{SYS_BOOT0, (PTU | IEN | M3)},					/* gpio_184 */
-	{SYS_BOOT1, (M3)},						/* gpio_185 */
-	{SYS_BOOT2, (PTD | IEN | M3)},					/* gpio_186 */
-	{SYS_BOOT3, (M3)},						/* gpio_187 */
-	{SYS_BOOT4, (M3)},						/* gpio_188 */
-	{SYS_BOOT5, (PTD | IEN | M3)},					/* gpio_189 */
-	{DPM_EMU0, (IEN | M0)},						/* dpm_emu0 */
-	{DPM_EMU1, (IEN | M0)},						/* dpm_emu1 */
-	{DPM_EMU2, (IEN | M0)},						/* dpm_emu2 */
-	{DPM_EMU3, (IEN | M5)},						/* dispc2_data10 */
-	{DPM_EMU4, (IEN | M5)},						/* dispc2_data9 */
-	{DPM_EMU5, (IEN | M5)},						/* dispc2_data16 */
-	{DPM_EMU6, (IEN | M5)},						/* dispc2_data17 */
-	{DPM_EMU7, (IEN | M5)},						/* dispc2_hsync */
-	{DPM_EMU8, (IEN | M5)},						/* dispc2_pclk */
-	{DPM_EMU9, (IEN | M5)},						/* dispc2_vsync */
-	{DPM_EMU10, (IEN | M5)},					/* dispc2_de */
-	{DPM_EMU11, (IEN | M5)},					/* dispc2_data8 */
-	{DPM_EMU12, (IEN | M5)},					/* dispc2_data7 */
-	{DPM_EMU13, (IEN | M5)},					/* dispc2_data6 */
-	{DPM_EMU14, (IEN | M5)},					/* dispc2_data5 */
-	{DPM_EMU15, (IEN | M5)},					/* dispc2_data4 */
-	{DPM_EMU16, (M3)},						/* gpio_27 */
-	{DPM_EMU17, (IEN | M5)},					/* dispc2_data2 */
-	{DPM_EMU18, (IEN | M5)},					/* dispc2_data1 */
-	{DPM_EMU19, (IEN | M5)},					/* dispc2_data0 */
-};
-
-const struct pad_conf_entry core_padconf_array_non_essential_4430[] = {
-	{ABE_MCBSP2_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_mcbsp2_clkx */
-};
-
-const struct pad_conf_entry core_padconf_array_non_essential_4460[] = {
-	{ABE_MCBSP2_CLKX, (PTU | OFF_EN | OFF_OUT_PTU | M3)},		/* led status_1 */
-};
-
-const struct pad_conf_entry wkup_padconf_array_non_essential[] = {
-	{PAD0_SIM_IO, (IEN | M0)},		/* sim_io */
-	{PAD1_SIM_CLK, (M0)},			/* sim_clk */
-	{PAD0_SIM_RESET, (M0)},			/* sim_reset */
-	{PAD1_SIM_CD, (PTU | IEN | M0)},	/* sim_cd */
-	{PAD0_SIM_PWRCTRL, (M0)},		/* sim_pwrctrl */
-	{PAD1_FREF_XTAL_IN, (M0)},		/* # */
-	{PAD0_FREF_SLICER_IN, (M0)},		/* fref_slicer_in */
-	{PAD1_FREF_CLK_IOREQ, (M0)},		/* fref_clk_ioreq */
-	{PAD0_FREF_CLK0_OUT, (M2)},		/* sys_drm_msecure */
-	{PAD1_FREF_CLK3_REQ, M7},		/* safe mode */
-	{PAD0_FREF_CLK4_OUT, (PTU | M3)},	/* led status_2 */
-	{PAD0_SYS_NRESPWRON, (M0)},		/* sys_nrespwron */
-	{PAD1_SYS_NRESWARM, (M0)},		/* sys_nreswarm */
-	{PAD0_SYS_PWR_REQ, (PTU | M0)},		/* sys_pwr_req */
-	{PAD1_SYS_PWRON_RESET, (M3)},		/* gpio_wk29 */
-	{PAD0_SYS_BOOT6, (IEN | M3)},		/* gpio_wk9 */
-	{PAD1_SYS_BOOT7, (IEN | M3)},		/* gpio_wk10 */
-};
-
-const struct pad_conf_entry wkup_padconf_array_non_essential_4430[] = {
-	{PAD1_FREF_CLK4_REQ, (PTU | M3)},	/* led status_1 */
-};
-
 #endif /* _PANDA_MUX_DATA_H_ */
diff --git a/board/ti/sdp4430/sdp.c b/board/ti/sdp4430/sdp.c
index 79270a9..1e9ef9e 100644
--- a/board/ti/sdp4430/sdp.c
+++ b/board/ti/sdp4430/sdp.c
@@ -73,26 +73,6 @@ void set_muxconf_regs_essential(void)
 				 sizeof(struct pad_conf_entry));
 }
 
-void set_muxconf_regs_non_essential(void)
-{
-	do_set_mux((*ctrl)->control_padconf_core_base,
-		   core_padconf_array_non_essential,
-		   sizeof(core_padconf_array_non_essential) /
-		   sizeof(struct pad_conf_entry));
-
-	do_set_mux((*ctrl)->control_padconf_wkup_base,
-		   wkup_padconf_array_non_essential,
-		   sizeof(wkup_padconf_array_non_essential) /
-		   sizeof(struct pad_conf_entry));
-
-	if (omap_revision() < OMAP4460_ES1_0) {
-		do_set_mux((*ctrl)->control_padconf_wkup_base,
-			wkup_padconf_array_non_essential_4430,
-			sizeof(wkup_padconf_array_non_essential_4430) /
-			sizeof(struct pad_conf_entry));
-	}
-}
-
 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
 int board_mmc_init(bd_t *bis)
 {
diff --git a/board/ti/sdp4430/sdp4430_mux_data.h b/board/ti/sdp4430/sdp4430_mux_data.h
index 4394dba..9a9efe7 100644
--- a/board/ti/sdp4430/sdp4430_mux_data.h
+++ b/board/ti/sdp4430/sdp4430_mux_data.h
@@ -65,201 +65,4 @@ const struct pad_conf_entry wkup_padconf_array_essential_4460[] = {
 
 };
 
-const struct pad_conf_entry core_padconf_array_non_essential[] = {
-	{GPMC_AD8, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M3)},	/* gpio_32 */
-	{GPMC_AD9, (PTU | IEN | M3)},					/* gpio_33 */
-	{GPMC_AD10, (PTU | IEN | M3)},					/* gpio_34 */
-	{GPMC_AD11, (PTU | IEN | M3)},					/* gpio_35 */
-	{GPMC_AD12, (PTU | IEN | M3)},					/* gpio_36 */
-	{GPMC_AD13, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)},	/* gpio_37 */
-	{GPMC_AD14, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)},	/* gpio_38 */
-	{GPMC_AD15, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)},	/* gpio_39 */
-	{GPMC_A16, (M3)},						/* gpio_40 */
-	{GPMC_A17, (PTD | M3)},						/* gpio_41 */
-	{GPMC_A18, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row6 */
-	{GPMC_A19, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row7 */
-	{GPMC_A20, (IEN | M3)},						/* gpio_44 */
-	{GPMC_A21, (M3)},						/* gpio_45 */
-	{GPMC_A22, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col6 */
-	{GPMC_A23, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col7 */
-	{GPMC_A24, (PTD | M3)},						/* gpio_48 */
-	{GPMC_A25, (PTD | M3)},						/* gpio_49 */
-	{GPMC_NCS0, (M3)},						/* gpio_50 */
-	{GPMC_NCS1, (IEN | M3)},					/* gpio_51 */
-	{GPMC_NCS2, (IEN | M3)},					/* gpio_52 */
-	{GPMC_NCS3, (IEN | M3)},					/* gpio_53 */
-	{GPMC_NWP, (M3)},						/* gpio_54 */
-	{GPMC_CLK, (PTD | M3)},						/* gpio_55 */
-	{GPMC_NADV_ALE, (M3)},						/* gpio_56 */
-	{GPMC_NBE0_CLE, (M3)},						/* gpio_59 */
-	{GPMC_NBE1, (PTD | M3)},					/* gpio_60 */
-	{GPMC_WAIT0, (PTU | IEN | M3)},					/* gpio_61 */
-	{GPMC_WAIT1, (IEN | M3)},					/* gpio_62 */
-	{C2C_DATA11, (PTD | M3)},					/* gpio_100 */
-	{C2C_DATA12, (M1)},						/* dsi1_te0 */
-	{C2C_DATA13, (PTD | M3)},					/* gpio_102 */
-	{C2C_DATA14, (M1)},						/* dsi2_te0 */
-	{C2C_DATA15, (PTD | M3)},					/* gpio_104 */
-	{HDMI_HPD, (M0)},						/* hdmi_hpd */
-	{HDMI_CEC, (M0)},						/* hdmi_cec */
-	{HDMI_DDC_SCL, (PTU | M0)},					/* hdmi_ddc_scl */
-	{HDMI_DDC_SDA, (PTU | IEN | M0)},				/* hdmi_ddc_sda */
-	{CSI21_DX0, (IEN | M0)},					/* csi21_dx0 */
-	{CSI21_DY0, (IEN | M0)},					/* csi21_dy0 */
-	{CSI21_DX1, (IEN | M0)},					/* csi21_dx1 */
-	{CSI21_DY1, (IEN | M0)},					/* csi21_dy1 */
-	{CSI21_DX2, (IEN | M0)},					/* csi21_dx2 */
-	{CSI21_DY2, (IEN | M0)},					/* csi21_dy2 */
-	{CSI21_DX3, (PTD | M7)},					/* csi21_dx3 */
-	{CSI21_DY3, (PTD | M7)},					/* csi21_dy3 */
-	{CSI21_DX4, (PTD | OFF_EN | OFF_PD | OFF_IN | M7)},		/* csi21_dx4 */
-	{CSI21_DY4, (PTD | OFF_EN | OFF_PD | OFF_IN | M7)},		/* csi21_dy4 */
-	{CSI22_DX0, (IEN | M0)},					/* csi22_dx0 */
-	{CSI22_DY0, (IEN | M0)},					/* csi22_dy0 */
-	{CSI22_DX1, (IEN | M0)},					/* csi22_dx1 */
-	{CSI22_DY1, (IEN | M0)},					/* csi22_dy1 */
-	{CAM_SHUTTER, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)},		/* cam_shutter */
-	{CAM_STROBE, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)},		/* cam_strobe */
-	{CAM_GLOBALRESET, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)},	/* gpio_83 */
-	{USBB1_ULPITLL_CLK, (IEN | OFF_EN | OFF_IN | M1)},		/* hsi1_cawake */
-	{USBB1_ULPITLL_STP, (IEN | OFF_EN | OFF_IN | M1)},		/* hsi1_cadata */
-	{USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_IN | M1)},		/* hsi1_caflag */
-	{USBB1_ULPITLL_NXT, (OFF_EN | M1)},				/* hsi1_acready */
-	{USBB1_ULPITLL_DAT0, (OFF_EN | M1)},				/* hsi1_acwake */
-	{USBB1_ULPITLL_DAT1, (OFF_EN | M1)},				/* hsi1_acdata */
-	{USBB1_ULPITLL_DAT2, (OFF_EN | M1)},				/* hsi1_acflag */
-	{USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_IN | M1)},		/* hsi1_caready */
-	{ABE_MCBSP2_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_mcbsp2_clkx */
-	{ABE_MCBSP2_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)},		/* abe_mcbsp2_dr */
-	{ABE_MCBSP2_DX, (OFF_EN | OFF_OUT_PTD | M0)},			/* abe_mcbsp2_dx */
-	{ABE_MCBSP2_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_mcbsp2_fsx */
-	{ABE_MCBSP1_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_mcbsp1_clkx */
-	{ABE_MCBSP1_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)},		/* abe_mcbsp1_dr */
-	{ABE_MCBSP1_DX, (OFF_EN | OFF_OUT_PTD | M0)},			/* abe_mcbsp1_dx */
-	{ABE_MCBSP1_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_mcbsp1_fsx */
-	{ABE_PDM_UL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_pdm_ul_data */
-	{ABE_PDM_DL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_pdm_dl_data */
-	{ABE_PDM_FRAME, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_pdm_frame */
-	{ABE_PDM_LB_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_pdm_lb_clk */
-	{ABE_CLKS, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* abe_clks */
-	{ABE_DMIC_CLK1, (M0)},						/* abe_dmic_clk1 */
-	{ABE_DMIC_DIN1, (IEN | M0)},					/* abe_dmic_din1 */
-	{ABE_DMIC_DIN2, (IEN | M0)},					/* abe_dmic_din2 */
-	{ABE_DMIC_DIN3, (IEN | M0)},					/* abe_dmic_din3 */
-	{UART2_CTS, (PTU | IEN | M0)},					/* uart2_cts */
-	{UART2_RTS, (M0)},						/* uart2_rts */
-	{UART2_RX, (PTU | IEN | M0)},					/* uart2_rx */
-	{UART2_TX, (M0)},						/* uart2_tx */
-	{HDQ_SIO, (M3)},						/* gpio_127 */
-	{MCSPI1_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* mcspi1_clk */
-	{MCSPI1_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* mcspi1_somi */
-	{MCSPI1_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* mcspi1_simo */
-	{MCSPI1_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* mcspi1_cs0 */
-	{MCSPI1_CS1, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)},	/* mcspi1_cs1 */
-	{MCSPI1_CS2, (PTU | OFF_EN | OFF_OUT_PTU | M3)},		/* gpio_139 */
-	{MCSPI1_CS3, (PTU | IEN | M3)},					/* gpio_140 */
-	{SDMMC5_CLK, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M0)},		/* sdmmc5_clk */
-	{SDMMC5_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc5_cmd */
-	{SDMMC5_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc5_dat0 */
-	{SDMMC5_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc5_dat1 */
-	{SDMMC5_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc5_dat2 */
-	{SDMMC5_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* sdmmc5_dat3 */
-	{MCSPI4_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* mcspi4_clk */
-	{MCSPI4_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* mcspi4_simo */
-	{MCSPI4_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},		/* mcspi4_somi */
-	{MCSPI4_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* mcspi4_cs0 */
-	{UART4_RX, (IEN | M0)},						/* uart4_rx */
-	{UART4_TX, (M0)},						/* uart4_tx */
-	{USBB2_ULPITLL_CLK, (PTD | IEN | M3)},				/* gpio_157 */
-	{USBB2_ULPITLL_STP, (IEN | M5)},				/* dispc2_data23 */
-	{USBB2_ULPITLL_DIR, (IEN | M5)},				/* dispc2_data22 */
-	{USBB2_ULPITLL_NXT, (IEN | M5)},				/* dispc2_data21 */
-	{USBB2_ULPITLL_DAT0, (IEN | M5)},				/* dispc2_data20 */
-	{USBB2_ULPITLL_DAT1, (IEN | M5)},				/* dispc2_data19 */
-	{USBB2_ULPITLL_DAT2, (IEN | M5)},				/* dispc2_data18 */
-	{USBB2_ULPITLL_DAT3, (IEN | M5)},				/* dispc2_data15 */
-	{USBB2_ULPITLL_DAT4, (IEN | M5)},				/* dispc2_data14 */
-	{USBB2_ULPITLL_DAT5, (IEN | M5)},				/* dispc2_data13 */
-	{USBB2_ULPITLL_DAT6, (IEN | M5)},				/* dispc2_data12 */
-	{USBB2_ULPITLL_DAT7, (IEN | M5)},				/* dispc2_data11 */
-	{USBB2_HSIC_DATA, (PTD | OFF_EN | OFF_OUT_PTU | M3)},		/* gpio_169 */
-	{USBB2_HSIC_STROBE, (PTD | OFF_EN | OFF_OUT_PTU | M3)},		/* gpio_170 */
-	{UNIPRO_TX0, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col0 */
-	{UNIPRO_TY0, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col1 */
-	{UNIPRO_TX1, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col2 */
-	{UNIPRO_TY1, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col3 */
-	{UNIPRO_TX2, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col4 */
-	{UNIPRO_TY2, (OFF_EN | OFF_PD | OFF_IN | M1)},			/* kpd_col5 */
-	{UNIPRO_RX0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row0 */
-	{UNIPRO_RY0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row1 */
-	{UNIPRO_RX1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row2 */
-	{UNIPRO_RY1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row3 */
-	{UNIPRO_RX2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row4 */
-	{UNIPRO_RY2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)},	/* kpd_row5 */
-	{FREF_CLK1_OUT, (M0)},						/* fref_clk1_out */
-	{FREF_CLK2_OUT, (M0)},						/* fref_clk2_out */
-	{SYS_NIRQ1, (PTU | IEN | M0)},					/* sys_nirq1 */
-	{SYS_NIRQ2, (M7)},						/* sys_nirq2 */
-	{SYS_BOOT0, (PTU | IEN | M3)},					/* gpio_184 */
-	{SYS_BOOT1, (M3)},						/* gpio_185 */
-	{SYS_BOOT2, (PTD | IEN | M3)},					/* gpio_186 */
-	{SYS_BOOT3, (PTD | IEN | M3)},					/* gpio_187 */
-	{SYS_BOOT4, (M3)},						/* gpio_188 */
-	{SYS_BOOT5, (PTD | IEN | M3)},					/* gpio_189 */
-	{DPM_EMU0, (IEN | M0)},						/* dpm_emu0 */
-	{DPM_EMU1, (IEN | M0)},						/* dpm_emu1 */
-	{DPM_EMU2, (IEN | M0)},						/* dpm_emu2 */
-	{DPM_EMU3, (IEN | M5)},						/* dispc2_data10 */
-	{DPM_EMU4, (IEN | M5)},						/* dispc2_data9 */
-	{DPM_EMU5, (IEN | M5)},						/* dispc2_data16 */
-	{DPM_EMU6, (IEN | M5)},						/* dispc2_data17 */
-	{DPM_EMU7, (IEN | M5)},						/* dispc2_hsync */
-	{DPM_EMU8, (IEN | M5)},						/* dispc2_pclk */
-	{DPM_EMU9, (IEN | M5)},						/* dispc2_vsync */
-	{DPM_EMU10, (IEN | M5)},					/* dispc2_de */
-	{DPM_EMU11, (IEN | M5)},					/* dispc2_data8 */
-	{DPM_EMU12, (IEN | M5)},					/* dispc2_data7 */
-	{DPM_EMU13, (IEN | M5)},					/* dispc2_data6 */
-	{DPM_EMU14, (IEN | M5)},					/* dispc2_data5 */
-	{DPM_EMU15, (IEN | M5)},					/* dispc2_data4 */
-	{DPM_EMU16, (M3)},						/* gpio_27 */
-	{DPM_EMU17, (IEN | M5)},					/* dispc2_data2 */
-	{DPM_EMU18, (IEN | M5)},					/* dispc2_data1 */
-	{DPM_EMU19, (IEN | M5)},					/* dispc2_data0 */
-	{I2C1_SCL, (PTU | IEN | M0)},					/* i2c1_scl */
-	{I2C1_SDA, (PTU | IEN | M0)},					/* i2c1_sda */
-	{I2C2_SCL, (PTU | IEN | M0)},					/* i2c2_scl */
-	{I2C2_SDA, (PTU | IEN | M0)},					/* i2c2_sda */
-	{I2C3_SCL, (PTU | IEN | M0)},					/* i2c3_scl */
-	{I2C3_SDA, (PTU | IEN | M0)},					/* i2c3_sda */
-	{I2C4_SCL, (PTU | IEN | M0)},					/* i2c4_scl */
-	{I2C4_SDA, (PTU | IEN | M0)}					/* i2c4_sda */
-
-};
-
-const struct pad_conf_entry wkup_padconf_array_non_essential[] = {
-	{PAD0_SIM_IO, (IEN | M0)},		/* sim_io */
-	{PAD1_SIM_CLK, (M0)},			/* sim_clk */
-	{PAD0_SIM_RESET, (M0)},			/* sim_reset */
-	{PAD1_SIM_CD, (PTU | IEN | M0)},	/* sim_cd */
-	{PAD0_SIM_PWRCTRL, (M0)},		/* sim_pwrctrl */
-	{PAD1_FREF_XTAL_IN, (M0)},		/* # */
-	{PAD0_FREF_SLICER_IN, (M0)},		/* fref_slicer_in */
-	{PAD1_FREF_CLK_IOREQ, (M0)},		/* fref_clk_ioreq */
-	{PAD0_FREF_CLK0_OUT, (M2)},		/* sys_drm_msecure */
-	{PAD1_FREF_CLK3_REQ, (M3)},		/* gpio_wk30 - Debug led-1 */
-	{PAD0_FREF_CLK3_OUT, (M0)},		/* fref_clk3_out */
-	{PAD0_FREF_CLK4_OUT, (M3)},		/* gpio_wk8 - Debug led-3 */
-	{PAD0_SYS_NRESPWRON, (M0)},		/* sys_nrespwron */
-	{PAD1_SYS_NRESWARM, (M0)},		/* sys_nreswarm */
-	{PAD0_SYS_PWR_REQ, (PTU | M0)},		/* sys_pwr_req */
-	{PAD1_SYS_PWRON_RESET, (M3)},		/* gpio_wk29 */
-	{PAD0_SYS_BOOT6, (IEN | M3)},		/* gpio_wk9 */
-	{PAD1_SYS_BOOT7, (IEN | M3)},		/* gpio_wk10 */
-};
-
-const struct pad_conf_entry wkup_padconf_array_non_essential_4430[] = {
-	{PAD1_FREF_CLK4_REQ, (M3)}	/* gpio_wk7 - Debug led-2 */
-};
-
 #endif /* _SDP4430_MUX_DATA_H */
diff --git a/doc/feature-removal-schedule.txt b/doc/feature-removal-schedule.txt
index 1c79c14..16819c7 100644
--- a/doc/feature-removal-schedule.txt
+++ b/doc/feature-removal-schedule.txt
@@ -19,22 +19,6 @@ Who:	Tom Rini <trini@ti.com>
 
 ---------------------------
 
-What:	Remove CONFIG_SYS_ENABLE_PADS_ALL and CONFIG_SYS_CLOCKS_ENABLE_ALL
-When:	Release v2013.07
-
-Why:	When set these options enable "all" of the pads and clocks found
-	on OMAP4/5 platforms, so that the Linux Kernel does not have to.
-	It has been agreed that this goes against the U-Boot design
-	philosophy and since f3f98bb0 we have not enabled more than is
-	used in U-Boot.  The kernel has been updating drivers to enable
-	rather than assume pads/clocks have been enabled already.  Our
-	expectation is that by v2013.07 a suitable kernel shall exist that
-	does not need these options set for a reasonable I/O set to function.
-
-Who:	Tom Rini <trini@ti.com> and Sricharan R <r.sricharan@ti.com>
-
----------------------------
-
 What:	Users of the legacy miiphy_* code
 When:	undetermined
 
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index f45deeb..d3c4756 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -34,7 +34,7 @@
 
 /* SPL defines. */
 #define CONFIG_SPL_TEXT_BASE		0x40300350
-#define CONFIG_SPL_MAX_SIZE		(0x40337C00 - CONFIG_SPL_TEXT_BASE)
+#define CONFIG_SPL_MAX_SIZE		(220 << 10)	/* 220KB */
 #define CONFIG_SPL_YMODEM_SUPPORT
 
 /* Enabling L2 Cache */
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index f210ed8..04ae3ca 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -4,7 +4,7 @@
  * Lokesh Vutla	  <lokeshvutla@ti.com>
  *
  * Configuration settings for the TI DRA7XX board.
- * See omap5_common.h for omap5 common settings.
+ * See ti_omap5_common.h for omap5 common settings.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -34,7 +34,7 @@
 
 #define CONFIG_SYS_OMAP_ABE_SYSCK
 
-#include <configs/omap5_common.h>
+#include <configs/ti_omap5_common.h>
 
 /* CPSW Ethernet */
 #define CONFIG_CMD_NET			/* 'bootp' and 'tftp' */
diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
index 71062a6..20fbbec 100644
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -10,20 +10,13 @@
 #ifndef __IGEP00X0_H
 #define __IGEP00X0_H
 
-#include <asm/sizes.h>
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_OMAP		1	/* in a TI OMAP core */
-#define CONFIG_OMAP34XX		1	/* which is a 34XX */
-#define CONFIG_OMAP_GPIO
-#define CONFIG_OMAP_COMMON
+#ifdef CONFIG_BOOT_NAND
+#define CONFIG_NAND
+#endif
 
-#define CONFIG_SDRC	/* The chip has SDRC controller */
+#define CONFIG_NR_DRAM_BANKS            2
 
-#include <asm/arch/cpu.h>
-#include <asm/arch/omap3.h>
+#include <configs/ti_omap3_common.h>
 #include <asm/mach-types.h>
 
 /*
@@ -32,47 +25,12 @@
 #define CONFIG_DISPLAY_CPUINFO		1
 #define CONFIG_DISPLAY_BOARDINFO	1
 
-/* Clock Defines */
-#define V_OSCK			26000000	/* Clock output from T2 */
-#define V_SCLK			(V_OSCK >> 1)
-
 #define CONFIG_MISC_INIT_R
 
-#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
 #define CONFIG_REVISION_TAG		1
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMD_BOOTZ
 #define CONFIG_SUPPORT_RAW_INITRD
 
-/*
- * NS16550 Configuration
- */
-
-#define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
-
-/* select serial console configuration */
-#define CONFIG_CONS_INDEX		3
-#define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
-#define CONFIG_SERIAL3			3
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600, \
-					115200}
-#define CONFIG_GENERIC_MMC		1
-#define CONFIG_MMC			1
-#define CONFIG_OMAP_HSMMC		1
-#define CONFIG_DOS_PARTITION		1
-
 /* define to enable boot progress via leds */
 #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
     (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
@@ -95,21 +53,10 @@
 #define CONFIG_USBD_MANUFACTURER	"Texas Instruments"
 #define CONFIG_USBD_PRODUCT_NAME	"IGEP"
 
-/* commands to include */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_CACHE
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_FAT		/* FAT support			*/
-#define CONFIG_CMD_FS_GENERIC
-#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
-#define CONFIG_CMD_MMC		/* MMC support			*/
 #ifdef CONFIG_BOOT_ONENAND
 #define CONFIG_CMD_ONENAND	/* ONENAND support		*/
 #endif
-#ifdef CONFIG_BOOT_NAND
-#define CONFIG_CMD_NAND
-#endif
 #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
     (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032)
 #define CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
@@ -117,24 +64,8 @@
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_NFS		/* NFS support			*/
-#define CONFIG_CMD_MTDPARTS	/* Enable MTD parts commands	*/
-#define CONFIG_MTD_DEVICE
-
-#undef CONFIG_CMD_FLASH		/* flinfo, erase, protect	*/
-#undef CONFIG_CMD_IMLS		/* List all found images	*/
 
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_OMAP34XX
-#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
-
-/*
- * TWL4030
- */
-#define CONFIG_TWL4030_POWER		1
-
-#define CONFIG_BOOTDELAY		3
+/*#undef CONFIG_ENV_IS_NOWHERE*/
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"usbtty=cdc_acm\0" \
@@ -205,48 +136,6 @@
 	"fi;" \
 	"run nandboot;" \
 
-#define CONFIG_AUTO_COMPLETE		1
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
-#define CONFIG_SYS_PROMPT		"U-Boot # "
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
-
-#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)	/* memtest */
-								/* works on */
-#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
-					0x01F00000) /* 31MB */
-
-#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)	/* default */
-							/* load address */
-
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)
-
-/*
- * OMAP3 has 12 GP timers, they can be driven by the system clock
- * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
- * This rate is divided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
-#define CONFIG_SYS_PTV			2       /* Divisor: 2^(PTV+1) => 8 */
-
-/*
- * Physical Memory Map
- *
- */
-#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
-#define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
-
 /*
  * FLASH and environment organization
  */
@@ -263,24 +152,16 @@
 #define CONFIG_ENV_ADDR			ONENAND_ENV_OFFSET
 #endif
 
-#ifdef CONFIG_BOOT_NAND
+#ifdef CONFIG_NAND
 #define PISMO1_NAND_SIZE		GPMC_SIZE_128M /* Configure the PISMO */
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_SYS_NAND_BASE		NAND_BASE
 #define GPMC_NAND_ECC_LP_x16_LAYOUT	1
 #define CONFIG_ENV_OFFSET		0x260000 /* environment starts here */
 #define CONFIG_ENV_IS_IN_NAND	        1
 #define CONFIG_ENV_SIZE			(512 << 10) /* Total Size Environment */
 #define CONFIG_ENV_ADDR			NAND_ENV_OFFSET
-#define CONFIG_SYS_MAX_NAND_DEVICE      1
 #endif
 
 /*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
-
-/*
  * SMSC911x Ethernet
  */
 #if defined(CONFIG_CMD_NET)
@@ -289,54 +170,9 @@
 #define CONFIG_SMC911X_BASE	0x2C000000
 #endif /* (CONFIG_CMD_NET) */
 
-/*
- * Leave it at 0x80008000 to allow booting new u-boot.bin with X-loader
- * and older u-boot.bin with the new U-Boot SPL.
- */
-#define CONFIG_SYS_TEXT_BASE		0x80008000
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
-#define CONFIG_SYS_INIT_RAM_SIZE	0x800
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - \
-					 GENERATED_GBL_DATA_SIZE)
-
-/* SPL */
-#define CONFIG_SPL
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_NAND_SIMPLE
-#define CONFIG_SPL_TEXT_BASE		0x40200800
-#define CONFIG_SPL_MAX_SIZE		(54 * 1024)
-#define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
-
-/* move malloc and bss high to prevent clashing with the main image */
-#define CONFIG_SYS_SPL_MALLOC_START	0x87000000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
-#define CONFIG_SPL_BSS_START_ADDR	0x87080000	/* end of minimum RAM */
-#define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
-
-/* MMC boot config */
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
-
-#define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-
-#define CONFIG_SPL_POWER_SUPPORT
-#define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
-
+/* OneNAND boot config */
 #ifdef CONFIG_BOOT_ONENAND
 #define CONFIG_SPL_ONENAND_SUPPORT
-
-/* OneNAND boot config */
 #define CONFIG_SYS_ONENAND_U_BOOT_OFFS  0x80000
 #define CONFIG_SYS_ONENAND_PAGE_SIZE	2048
 #define CONFIG_SPL_ONENAND_LOAD_ADDR    0x80000
@@ -345,13 +181,8 @@
 
 #endif
 
-#ifdef CONFIG_BOOT_NAND
-#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_ECC
-
 /* NAND boot config */
+#ifdef CONFIG_NAND
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT	64
 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
@@ -363,8 +194,6 @@
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	3
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_HAM1_CODE_HW
-#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
 #endif
 
 #endif /* __IGEP00X0_H */
diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
index 73dc088..7378acd 100644
--- a/include/configs/omap4_panda.h
+++ b/include/configs/omap4_panda.h
@@ -4,7 +4,7 @@
  * Steve Sakoman  <steve@sakoman.com>
  *
  * Configuration settings for the TI OMAP4 Panda board.
- * See omap4_common.h for OMAP4 common part
+ * See ti_omap4_common.h for OMAP4 common part
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -36,7 +36,7 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 
-#include <configs/omap4_common.h>
+#include <configs/ti_omap4_common.h>
 #define CONFIG_CMD_NET
 
 /* GPIO */
diff --git a/include/configs/omap4_sdp4430.h b/include/configs/omap4_sdp4430.h
index b352511..a837974 100644
--- a/include/configs/omap4_sdp4430.h
+++ b/include/configs/omap4_sdp4430.h
@@ -5,7 +5,7 @@
  * Steve Sakoman  <steve@sakoman.com>
  *
  * Configuration settings for the TI SDP4430 board.
- * See omap4_common.h for OMAP4 common part
+ * See ti_omap4_common.h for OMAP4 common part
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -19,7 +19,7 @@
 #define CONFIG_4430SDP		1	/* working with SDP */
 #define CONFIG_MACH_TYPE	MACH_TYPE_OMAP_4430SDP
 
-#include <configs/omap4_common.h>
+#include <configs/ti_omap4_common.h>
 
 /* Battery Charger */
 #ifndef CONFIG_SPL_BUILD
diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index 76c5106..51dff23 100644
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -4,7 +4,7 @@
  * Sricharan R	  <r.sricharan@ti.com>
  *
  * Configuration settings for the TI EVM5430 board.
- * See omap5_common.h for omap5 common settings.
+ * See ti_omap5_common.h for omap5 common settings.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -17,7 +17,7 @@
 	"uuid_disk=${uuid_gpt_disk};" \
 	"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
 
-#include <configs/omap5_common.h>
+#include <configs/ti_omap5_common.h>
 
 #define CONFIG_CONS_INDEX		3
 #define CONFIG_SYS_NS16550_COM3		UART3_BASE
diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h
index 4364eef..91f97dd 100644
--- a/include/configs/ti_am335x_common.h
+++ b/include/configs/ti_am335x_common.h
@@ -73,6 +73,10 @@
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #endif
 
+#ifdef CONFIG_NAND
+#define CONFIG_SPL_NAND_AM33XX_BCH	/* ELM support */
+#endif
+
 /* Now bring in the rest of the common code. */
 #include <configs/ti_armv7_common.h>
 
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index 99b60fc..69d69a5 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -45,11 +45,15 @@
 #define CONFIG_BOOTDELAY		1
 
 /*
- * DDR information.  We say (for simplicity) that we have 1 bank,
- * always, even when we have more.  We always start at 0x80000000,
- * and we place the initial stack pointer in our SRAM.
+ * DDR information.  If the CONFIG_NR_DRAM_BANKS is not defined,
+ * we say (for simplicity) that we have 1 bank, always, even when
+ * we have more.  We always start at 0x80000000, and we place the
+ * initial stack pointer in our SRAM. Otherwise, we can define
+ * CONFIG_NR_DRAM_BANKS before including this file.
  */
+#ifndef CONFIG_NR_DRAM_BANKS
 #define CONFIG_NR_DRAM_BANKS		1
+#endif
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
 #define CONFIG_SYS_INIT_SP_ADDR         (NON_SECURE_SRAM_END - \
 						GENERATED_GBL_DATA_SIZE)
@@ -237,7 +241,6 @@
 #define CONFIG_SPL_BOARD_INIT
 
 #ifdef CONFIG_NAND
-#define CONFIG_SPL_NAND_AM33XX_BCH	/* OMAP4 and later ELM support */
 #define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h
new file mode 100644
index 0000000..854cb78
--- /dev/null
+++ b/include/configs/ti_omap3_common.h
@@ -0,0 +1,73 @@
+/*
+ * ti_omap3_common.h
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * For more details, please see the technical documents listed at
+ *   http://www.ti.com/product/omap3530
+ *   http://www.ti.com/product/omap3630
+ *   http://www.ti.com/product/dm3730
+ */
+
+#ifndef __CONFIG_TI_OMAP3_COMMON_H__
+#define __CONFIG_TI_OMAP3_COMMON_H__
+
+#define CONFIG_OMAP34XX
+
+#include <asm/arch/cpu.h>
+#include <asm/arch/omap3.h>
+
+/* The chip has SDRC controller */
+#define CONFIG_SDRC
+
+/* Clock Defines */
+#define V_OSCK			26000000	/* Clock output from T2 */
+#define V_SCLK			(V_OSCK >> 1)
+
+/* NS16550 Configuration */
+#define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
+#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600, \
+					115200}
+
+/* Select serial console configuration */
+#define CONFIG_CONS_INDEX		3
+#define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
+#define CONFIG_SERIAL3			3
+
+/* Physical Memory Map */
+#define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
+#define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
+
+/*
+ * OMAP3 has 12 GP timers, they can be driven by the system clock
+ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
+ * This rate is divided by a local divisor.
+ */
+#define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
+
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)
+
+/* TWL4030 */
+#define CONFIG_TWL4030_POWER		1
+
+/* SPL */
+#define CONFIG_SPL_TEXT_BASE		0x40200800
+#define CONFIG_SPL_MAX_SIZE		(54 * 1024)
+#define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_POWER_SUPPORT
+
+#ifdef CONFIG_NAND
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_SIMPLE
+#endif
+
+/* Now bring in the rest of the common code. */
+#include <configs/ti_armv7_common.h>
+
+#endif	/* __CONFIG_TI_OMAP3_COMMON_H__ */
diff --git a/include/configs/omap4_common.h b/include/configs/ti_omap4_common.h
index d099bfd..2f0e4c0 100644
--- a/include/configs/omap4_common.h
+++ b/include/configs/ti_omap4_common.h
@@ -9,8 +9,8 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#ifndef __CONFIG_OMAP4_COMMON_H
-#define __CONFIG_OMAP4_COMMON_H
+#ifndef __CONFIG_TI_OMAP4_COMMON_H
+#define __CONFIG_TI_OMAP4_COMMON_H
 
 /*
  * High Level Configuration Options
@@ -159,4 +159,8 @@
 #define CONFIG_SPL_DISPLAY_PRINT
 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
 
-#endif /* __CONFIG_OMAP4_COMMON_H */
+#ifdef CONFIG_NAND
+#define CONFIG_SPL_NAND_AM33XX_BCH	/* ELM support */
+#endif
+
+#endif /* __CONFIG_TI_OMAP4_COMMON_H */
diff --git a/include/configs/omap5_common.h b/include/configs/ti_omap5_common.h
index c7fa37e..7b10fbd 100644
--- a/include/configs/omap5_common.h
+++ b/include/configs/ti_omap5_common.h
@@ -14,8 +14,8 @@
  * http://www.ti.com/product/omap5432
  */
 
-#ifndef __CONFIG_OMAP5_COMMON_H
-#define __CONFIG_OMAP5_COMMON_H
+#ifndef __CONFIG_TI_OMAP5_COMMON_H
+#define __CONFIG_TI_OMAP5_COMMON_H
 
 #define CONFIG_OMAP54XX
 #define CONFIG_DISPLAY_CPUINFO
@@ -146,4 +146,8 @@
 #define CONFIG_SPL_DISPLAY_PRINT
 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
 
-#endif /* __CONFIG_OMAP5_COMMON_H */
+#ifdef CONFIG_NAND
+#define CONFIG_SPL_NAND_AM33XX_BCH	/* ELM support */
+#endif
+
+#endif /* __CONFIG_TI_OMAP5_COMMON_H */